Windows Support Forum

No monitor, How do i disable onboard graphics card

Q: No monitor, How do i disable onboard graphics card

hey everyone

my sisters emachine of 3 yrs of age has finally had its first problem, the onboard
video card seems to have failed, in an attempt i bought a cheap graphics card
hoping to resolve the problem, a"256MB AGP Geforce Fx5200", ive been told that i need to disable the onboard graphics card first, before the other card can take over, but the whole reason why i even bought the card, was because i cant see her monitor, so there is no way i can change the settings, i am not new to computers, but i am very new to this problem, any info or suggestions as to what i can do to fix the problemswould be very much appreciated, thnx

Relevancy 100%
Preferred Solution: No monitor, How do i disable onboard graphics card

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: No monitor, How do i disable onboard graphics card

Disable the Onboard Grapphix in DEVICE MANAGER. Install your new card. Install the drivers. Be sure to hook the VGA cable up to the correct outlet.

http://www.techspot.com/community/topics/no-monitor-how-do-i-disable-onboard-graphics-card.65470/
Relevancy 87.29%

Just finished building a new PC for my mates brother all components seemed to be secure I turn on the PC with just the power cable in YAY from input to Built Monitor, Graphics PC, no signal AGP Onboard Newly and card it turns on so i think this is too good to Newly Built PC, no input signal to Monitor, from AGP card and Onboard Graphics be true it turns on first time I unplug it take it upstairs to my monitor plug in my monitor into the AGP card i installed in it Nvidia XT then booted it back up The monitor stays on standby no signal input sign floating round the sreen AHA the motherboard has onboard graphics maybe it defaults to that I remove the AGP card plug the monitors cable into the VGA socket on the motherboard boot it back up Still nothing I presumed that because the fan comes on CD drive and HDD that the processor is intalled Newly Built PC, no input signal to Monitor, from AGP card and Onboard Graphics right So then I reset the CMOS normally solves most things in my case lol boot it back up and still i got nothing The monitor and the Cable work fine and the AGP Newly Built PC, no input signal to Monitor, from AGP card and Onboard Graphics card is fine to as my friend used it in his other PC before giving it to me Motherboard is brand new and i had the same model before just without the onboard graphics Memory is also intalled right i checked twice For the love of god help me Could it be something to do with the Hard drive Slave Master wrong way round Disk Drive faulty I DON T KNOWW lol the only old bits in the PC are the Hard Drive Disk drives and the case itself Please consider everthing before just saying faulty this the Motherboard in question http www ecs com tw ECSWeb Product uID amp LanID Thanks nbsp

A:Newly Built PC, no input signal to Monitor, from AGP card and Onboard Graphics

https://forums.techguy.org/threads/newly-built-pc-no-input-signal-to-monitor-from-agp-card-and-onboard-graphics.427183/
Relevancy 79.55%

I have a q-lity motherboard and am having a tough time finding out how to turn off onboard graphics,I do not see any place where to to disable onboard graphics in bios, I only see choices for agp and pci change, does anyone have an answer, my board is a q-lity cpv4-t
 

Relevancy 79.55%

Here's the problem... My onboard graphics won't let me play 3d games, so I got a new video card but when I put it in it says "system only supports svda/add2 video cards in the x16 slot"

Now i've heard there's a switch on the motherboard to disable the graphics card but unless there's not one there, I didn't see it...

PC INFO
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) D CPU 3.20GHz, x86 Family 15 Model 6 Stepping 4
Processor Count: 2
RAM: 2039 Mb
Graphics Card:
Hard Drives: C: Total - 238409 MB, Free - 123090 MB;
Motherboard: Hewlett-Packard, 0A60h
Antivirus: None
 

A:disable onboard graphics

The message seems to indicate that your board does not support the new video card. I don't see that it has much to do with onboard graphics.

But onboard graphics can often be disabled in BIOS setup if no board jumper. If all else fails, it can be disabled in Device Manager.

But you should prepare for the possibility that you will lose graphics if the new card does not work and you will then have a hard tme getting back into the system. Making a backup of the system when it is working is advised, or at least a restore point if you can access System Restore without using the new graphics card, such as by booting your OS DVD.
 

https://forums.techguy.org/threads/disable-onboard-graphics.1036104/
Relevancy 79.55%

So, as title says, how can I disable my onboard graphics ?

Thanks, StalkeR.

A:How to disable onboard graphics ?

Not certain for the MSI boards but it should be an option in the BIOS.

http://www.sevenforums.com/graphic-cards/211200-how-disable-onboard-graphics.html
Relevancy 79.55%

hello

how do i disable my onboard graphics as i have bought a new card and need to disable it

cheers

bazz
 

Relevancy 79.55%

Ive been in bios and everything i cant seem to fully disable the thing! everytime i install my graphics card (AGP nvidia card) and turn the computer back on i get lots of beeps and the monitor refuses to turn on. it stays black and nothing happens. please hope someone can help me!!
tommy
 

Relevancy 78.69%

The motherboard:
http://www.biostar.com.tw/app/en/mb/content.php?S_ID=314

The bios manual:
http://www.wendellgeek.com/files4doug/P4M90-M7C_BIOS_1109.pdf

How should I disable the onboard graphics?
 

A:How do you disable the onboard graphics for this motherboard?

See page 31 of the Bios Manual
 

https://forums.techguy.org/threads/how-do-you-disable-the-onboard-graphics-for-this-motherboard.924752/
Relevancy 78.69%

Okay... first time on this site, don't know if I'm going to do this right.

I have a ASUS Motherboard A7V400-mx with onboard graphics VIA Unichrome.

I just bot a new AGP graphics card but need to first turn off my onboard graphics... I've gone through my entire BIOS and can't find any obvious option. Can anyone help?
 

A:Disable onboard graphics...errrrg!

Hp?

Is this board in an HP system? If so, go to HP and find the manual, as ASUS doesn't list it at their site, which leads me to believe it's OEM. There has to be something in the BIOS ("onboard peripherals", or "Soundmax", or something) that you can disable it with. Check the "advanced" tab.
 

http://www.techspot.com/community/topics/disable-onboard-graphics-errrrg.44519/
Relevancy 76.11%

Help, how do i disable my onboard graphics card? hewre's a link for more depth on the problem
http://forums.techguy.org/t249636.html
 

A:Disable onboard gfx card?

Just curiuos but why to you want to disable the graphics on the mobo?
 

https://forums.techguy.org/threads/disable-onboard-gfx-card.249658/
Relevancy 75.68%

Hi My name is Apoorva I am from India Now I would like to know the basic difference in terms of performance for an onboard graphics card and an external graphics card for a Laptop What could be a major difference Also for Onboard graphics it is said on all the branded website that the size of it is upto MB shared So say for instance if I go between External graphics Graphics Shared) Card Difference (384MB (128/256M & Onboard for an external graphics card for a new Difference between Onboard graphics (384MB Shared) & External Graphics Card (128/256M laptop which I am planning to purchase and the size of this external graphic card is MB or MB Difference between Onboard graphics (384MB Shared) & External Graphics Card (128/256M and as Onboard graphic card already provides MB shared memory therefore the question is that how could that external graphics card sizing MB deliver better performance as compared to Onbard graphics which sizes MB shared Also how are the new laptops launched by HP in India in terms of performance mobility amp stability The Laptop which I am looking for falls under series and is a business series laptop Waiting eagerly for a reply Apoorva nbsp

https://forums.techguy.org/threads/difference-between-onboard-graphics-384mb-shared-external-graphics-card-128-256m.702994/
Relevancy 75.68%

Hi all Video card appears to be reaching the end of the road with regular crashes of x type After extensive attempts card Enabling method onboard graphics graphics/Disabling to fix it the conclusion is that the card needs to be replaced I plan to acquire a completely new computer when I go overseas in days time Until then a band-aid solution occurred to me to last this week use the onboard graphics integrated in the motherboard instead of the failing discrete graphics card Some background info Motherboard is GA-G M-ES L Graphics card is nVidia GT Current display interface is DVI connected to graphics card VGA cable available My method is Update motherboard GA-G M-ES L drivers Uninstall discrete graphics card nVidia GT drivers Reboot and access BIOS Via BIOS disable graphics card and enable onboard graphics Save and shutdown Disconnect DVI monitor cable from graphics card also from monitor Connect VGA monitor cable to motherboard also to monitor Boot Enabling onboard graphics/Disabling graphics card method I would lke your opinion on this planned course of action which potentially could be nigh unfixable

A:Enabling onboard graphics/Disabling graphics card method

That is just how you should do that, it's unremarkable.

Should not be a problem at all, it's routine, you could add another card later and be just fine after disabling on-board again.

http://www.sevenforums.com/graphic-cards/291302-enabling-onboard-graphics-disabling-graphics-card-method.html
Relevancy 75.68%

Hi I am Techsavy from India Now I would like to know the basic difference in terms of performance for Dedicated Between Card Onboard Graphics Graphics a Difference Solved: an onboard graphics card and a dedicated graphics card for a Laptop What could be a major difference Also for Onboard graphics it is said on all the branded website that the size of it is upto MB shared So say for instance if I go for a dedicated graphics card for a new laptop which I am planning to purchase and the size of this dedicated graphic card is MB or MB and Onboard graphic card on the other hand provides MB shared memory therefore the question is that how could that external graphics card sizing MB deliver better performance as Solved: Difference Between Onboard Graphics a Dedicated Graphics Card compared to Onbard graphics which sizes MB shared Also how are the new laptops launched by HP in India in terms of performance mobility amp stability The Solved: Difference Between Onboard Graphics a Dedicated Graphics Card Laptop which I am looking for Solved: Difference Between Onboard Graphics a Dedicated Graphics Card falls under series and is a business series laptop Waiting eagerly for a reply Techsavy nbsp

A:Solved: Difference Between Onboard Graphics a Dedicated Graphics Card

https://forums.techguy.org/threads/solved-difference-between-onboard-graphics-a-dedicated-graphics-card.759339/
Relevancy 75.68%

I m having a problem others seem to encouter but can t get it resolved I bought a ATI Radeon X Pro MB PCI-E card I have an Emachine T computer with built in ati xpress Specs found herehttp www emachines com support product support html cat desktop amp subcat T-Series amp model T My problem graphics on new installing card Emachine/onboard-graphics Problem is after installing the card my computer doesn t recognize the hardware As soon as I put Problem installing new graphics card on Emachine/onboard-graphics the card in my monitor will not work The computer boots up and the monitor has power but no picture The card fan is working i can hear it Problem installing new graphics card on Emachine/onboard-graphics I take the card out and it works fine Here is what I have tried -Called emachines for support and after disabling my onboard graphics still doesn t work they say call ATI -Tried support from ATI no help they say its the computer -Tried disabling in BIOS but it doesn t offer a selection for that It also does t have a PNP feature Only first initial display which I tried on PCIEX -Plug Problem installing new graphics card on Emachine/onboard-graphics monitor to both card and onboard -Check MSI website and I do have updated BIOS I can tell that the onboard graphics are disabled due to large scale print I tried uninstalling the drivers but when i turn it on it detects and installs the built in graphics I just can t get the monitor to work whenever the card is inserted If it would work I could manually install the hardware and drivers I m thinking I need a different BIOS that would let me use PNP and disable onboard graphics Any help I would greatly appreciate this is my first time to this website and I thought I would try it before taking my computer to a shop to see if they can fix it Just scared of what they might charge since I only paid about for the card Thanks in advance Kevin nbsp

A:Problem installing new graphics card on Emachine/onboard-graphics

An extreme option

As you do have the option of a working computer prior to installing the new card I would back up any files that are important to you..
Then, before I would pay someone else BIG bucks, I would put in the new card and try a fresh install of windows. Force it to recognise your new card. The drivers that Windows will pick should suffice until the install is done and you can then install the card specific drivers from your disk.
This is given ONLY as a choice. I am not sure this will solve your problem but IT IS something this cheap bas____ would try before paying someone else.

Good Luck and check back, maybe someone else will contribute a better idea.
Greg
 

http://www.techspot.com/community/topics/problem-installing-new-graphics-card-on-emachine-onboard-graphics.41175/
Relevancy 75.25%

Hi, I have a Asus P4R800-VM mobo how do i go about disabling the onboard video card? Do I need a bios update?
 

A:How Do I Disable My Onboard Video Card

P4R800-VM

Manual:
http://dlsvr01.asus.com/pub/ASUS/mb/sock478/p4r800-vm/e1662_p4r800-vm.pdf

Can't see any disable function, so it must Auto Disable on AGP card through Plug and Play

Also found this info:
Supports 8X/4X +1.5V only
 

http://www.techspot.com/community/topics/how-do-i-disable-my-onboard-video-card.101024/
Relevancy 75.25%

Hi; just installed an ATI 4850 card in a Gigabyte GA-MA78G-DS3H Mobo, [AMD 64x2 6000+]. The Graphics Experience Index jumped from 3.6 to 5.9. (I don't do any high-end gaming and was focusing mainly on HDTV resolution, but it looks impressive on paper) Mobo has ATI 3200 onboard video.

Question is: "should I disable the onboard video in the bios, or leave it alone?" Current settings apparently work fine, but is there an advantage to disabling the onboard... or is it one of those , 'leave well enough alone' thingies?

Thanks

A:Disable onboard video card?

Originally Posted by idahjo


Hi; just installed an ATI 4850 card in a Gigabyte GA-MA78G-DS3H Mobo, [AMD 64x2 6000+]. The Graphics Experience Index jumped from 3.6 to 5.9. (I don't do any high-end gaming and was focusing mainly on HDTV resolution, but it looks impressive on paper) Mobo has ATI 3200 onboard video.

Question is: "should I disable the onboard video in the bios, or leave it alone?" Current settings apparently work fine, but is there an advantage to disabling the onboard... or is it one of those , 'leave well enough alone' thingies?

Thanks



its not a problem, infact catalyst control center is crossfiring your card with the onboard one, its not a problem and if you disable it you may get a performance drop

http://www.vistax64.com/graphic-cards/208073-disable-onboard-video-card.html
Relevancy 75.25%

Hello,
I own a gateway system with a celeron 400mhz,128mb ram,and a ATI Rage 128(not Pro).I want badly to upgrade my video card but the rage 128 is intergrated into my mobo.Can anyone help me please??

Thanks
etp714
 

A:i need to disable onboard video card

On bootup there will be a message to enter your bios. In your bios look for a video option that will allow you to disable your on board video. On the reboot, turn it off and install your new card.
Good Luck
 

https://forums.techguy.org/threads/i-need-to-disable-onboard-video-card.71346/
Relevancy 74.82%

Hello there, I am looking for a dirt cheap, Windows 7 suitable graphics card for use with a PC designed for multimedia purposes (watching films, listening to music etc). I would like to be able to use the full visual effects Windows 7 has to offer. It must have an S-video output and be compatible with the Asus M3A78-CM Motherboard. I have 1 PCI Express x 1 slot free and 2 x PCI 2.2 slots free.

Please provide some suggestions, doesn't have to be brand new.

Either that, or something like the Gadmei XGA/VGA LCD TV BOX. I want to connect my PC with the motherboard mentioned previously to my CRT TV (Panasonic TX-28PL4 Quintrix). The motherboard has onboard graphics via dvi and vga outputs. The TV has an S-VHS plug on the front, as well as RCA Audio/Video sockets. On the rear, it has 1 spare scart input.

What are your thoughts?
 

Relevancy 74.82%

Hello there, I am looking for a dirt cheap, Windows 7 suitable graphics card for use with a PC designed for multimedia purposes (watching films, listening to music etc). I would like to be able to use the full visual effects Windows 7 has to offer. It must have an S-video output and be compatible with the Asus M3A78-CM Motherboard. I have 1 PCI Express x 1 slot free and 2 x PCI 2.2 slots free.

Please provide some suggestions, doesn't have to be brand new.

Either that, or something like the Gadmei XGA/VGA LCD TV BOX. I want to connect my PC with the motherboard mentioned previously to my CRT TV (Panasonic TX-28PL4 Quintrix). The motherboard has onboard graphics via dvi and vga outputs. The TV has an S-VHS plug on the front, as well as RCA Audio/Video sockets. On the rear, it has 1 spare scart input.

What are your thoughts?

A:Graphics Card/Onboard Graphics for Media Centre PC

the graphics card listed in my specs may only be 64MB, but it surprisingly runs aero.
If that seems to be not quite what you're looking for, another card I would recommend is the nvidia 8400GS. It may be 512MB, but thats about as high as it's specs go, but you will need a more powerful PSU (300W+). The 8400GS is about ?30 and a vga to RCA adapter seems to be about ?5 (i recommend you buy the adapter before the card).
The one in my specs just has a VGA port, but the 8400GS has vga, dvi and hdmi (i think the hdmi may need some further cabling in the case, not sure though)

NB (the card listed in my system specs may actually be the GeForce 7200GS, all system information programs tell me that it could be both and there's no sticker on it. all i know for (kinda) certain is that its 64MB )

http://www.sevenforums.com/graphic-cards/158089-graphics-card-onboard-graphics-media-centre-pc.html
Relevancy 74.82%

I have a H535 and added a PCI GeForce GT610 that will support up to 2 monitors. I can get both onboard and PCI to work using 3 monitors, except when I have to turn off the computer.  Then the onboard graphics card fails to activate.   Here is what I have to do to get it working correctly again (I call it "the shuffle").Turn off computerUnplug PCI cardTurn on computer (boots using onboard graphics)Turn off computerInstall PCI cardTurn on computer Then everything works fine again until I have to turn off the computer at which point I have to do the shuffle again.

https://forums.lenovo.com/t5/Lenovo-E-H-K-M-Q-Y-and-ErazerX/H535-using-graphics-card-and-onboard-graphics-after-reboot/td-p/3372482
Relevancy 74.39%

Hello all
I'm Suzy, I dont know much bout PC, soft or hardware. Recently I just bought Creative Xtreem Audio. However, I discovered that the old sound card is intergrated w the ATI motherboard. When I check on Device Manager the current audio card is ((realtek ac97 audio driver)) . Does anyone know how to disable this audio card in order to install the X-Fi card

Thanks a lot
 

A:Can anyone show me how to disable onboard sound card

Can you pull it out? Or it's onboard? If so, go in BIOS and disable it, or there may be a jumper on the board to do so.
 

http://www.techspot.com/community/topics/can-anyone-show-me-how-to-disable-onboard-sound-card.111816/
Relevancy 74.39%

Hello, I'm having problems disabling a Dell Dimension 2400 Intel Integrated Extreme 3D graphics card and installing a new Radeon 9200 SE card. Every attempt to attach the new card results in a power up w/ nothing being displayed on screen (no BIOS or anything).

Is there a safe way to disable the on-board graphics card, that (in case the new card has problems) we can fall back to it without damaging the system? The new card is PCI by the way.

Thank You,
DrakeonX
 

A:Disable onboard video & Install new card?

You can try this from Dell

Dell2400

Please let us know if it works because the last time this came up it didn't appear to work. I also saw a post on one of the Dell forums about a BIOS update allowing you to disabling onboard video. Don't know if this is true so I'll look into it.
 

https://forums.techguy.org/threads/disable-onboard-video-install-new-card.312538/
Relevancy 74.39%

I just installed Windows XP Plus and for the games to work it requires 16 megs of video memory for it to work.

So got a new video card with 64 megs of memory, disabled the onboard video card in device manager, and installed new card.

Now with the new card installed in device manager it shows the onboard video disabled, and the new video card enable with 64 megs of memory but windows xp "PLUS" does not recognize the 64 megs of ram for the video card.

Does anyone know how to over come this problem

As always any help appreciated.
 

A:[SOLVED] disable onboard video card on hp

hmmm... where does it says that its not 64megs?

Have you checked the reported settings in DXDIAG (thats were it counts)
 

https://forums.techguy.org/threads/solved-disable-onboard-video-card-on-hp.147659/
Relevancy 73.53%

I recently brought a new ati pci video card for my pc and i tried everything to get it to work i disabled my onboard video card and uninstalled my video drivers and my computer will not recongize my new video card. Is there anyway to fix this problem. The video card is a ati pci radeom 9250 video card. I have 3 pci slots on the mother board and i have tried it in all 3 off them with no luck what so ever getting it to work. Losing patience with the darn thing. Can anyone help me out Thanks.
 

A:pavilion a305w won't disable onboard video card

Is there a BIOS Setting to Enable/Disable PCI ???

Does the MB/PSU Support the Cards Voltage Draw/Specification
 

https://forums.techguy.org/threads/pavilion-a305w-wont-disable-onboard-video-card.549367/
Relevancy 73.53%

Hey everyone How r u all Nice to meet u all well my friend bought a laptop it has on board graphics and also a additional nvidia graphics now when I run game the on board graphics card is getting detected and not the nvidia card I tried in bios but in the display part there are only options is optimus whic allows bot nvidia vga and intel vga to work and the other one allows only the intel vga to work so is there a way to make games recognise nvidia or can I disable onboard graphics through graphics not graphics card Onboard detected device manager laptop model lenovo ideapad z graphics card Nvidia geforce gt m and one more thing In one of the game I Onboard graphics detected not graphics card checked PES it shows as its using onboard graphics and I tried arkham city and tried enabling hardware acceleration physx but it said the laptops hardware doesnt support it one more thing I just went to nvidia control panel and in there d settings and there global settings its written there preferred graphics processor is integrated graphics and I couldnt change it can I disable the onboard graphics card in device manager thanks nbsp

A:Onboard graphics detected not graphics card

Hi , The option is the one where the nvidia card and intel on-board are shown, and the BIOS should select the nvidia card as priority if it can, and has a choice.
It's sometimes known as 'Primary Video' & the option is called PEG.
Make sure you save the settings when you exit or they won't be changed from before.
 

http://www.techspot.com/community/topics/onboard-graphics-detected-not-graphics-card.182102/
Relevancy 73.53%

My computer Simultaneously and Card Graphics Onboard Use Graphics a Dell Inspiron desktop Use Graphics Card and Onboard Graphics Simultaneously has a VGA port and an HDMI port built onto the motherboard for integrated graphics I have recently installed an Nvidia GeForce GB dedicated graphics card and it has DVI ports and mini-HDMI port I have a DVI monitor and a VGA monitor DVI-VGA adapter used connected to the graphics card I was trying to connect a projector to the VGA port on the onboard graphics but I couldn t get it to use the onboard graphics with the card installed In BIOS gt Advanced gt Graphics Options there is one setting Intel Multiple Monitor something It has two options Auto and Disabled currently Auto Its in-BIOS description states that it can use both onboard and dedicated cards to run multiple monitors However no luck Windows has shown a third monitor in the display settings with a bunch of quot Attempt VGA Connection quot options Selecting one and choosing Extend Desktop opens a quot Unable to Save Settings quot error Ubuntu does nothing to recognize anything Is it possible to use both the onboard and Nvidia graphics together Or am I better off buying a mini-HDMI to VGA adapter and connecting it to the Nvidia card and the projector Thanks for reading all my extended description PS I would like to get this working in Ubuntu currently but getting it in Windows and Ubuntu would be a bonus nbsp

A:Use Graphics Card and Onboard Graphics Simultaneously

Most of the time, no. Installing an addon card disables the onboard chipset.
 

https://forums.techguy.org/threads/use-graphics-card-and-onboard-graphics-simultaneously.1111649/
Relevancy 73.1%

I have a Cooler Master W power supply and a Nvidia Geforce gt Last week I decided to install a really old game I have which is incompatible with new video cards so I shut down my computer and unplugged my VGA cable out of my DVI-to-VGA adapter In my video card and plugged it into my VGA port on my motherboard to use onboard graphics for this old game When I tried to switch my computer I use No monitor graphics unless to my signal onboard on I got no signal whatsoever so I plugged my VGA cable back into my video card then I get no signal again After about days of googling this problem and posting No signal to my monitor unless I use onboard graphics problems on forums on my iphone torture someone told me to remove my video card physically then use onboard graphics My computer monitor now displays But I can t use my nvidia gt anymore Does anyone know the fix to this More info When my video card is physically in my motherboard my monitor won t display anything even if my VGA cable is in the motherboard When I plug my VGA cable into port of my video card my monitor light is green but the screen stays black If I use port my monitor gets no signal and the light is orange Also I noticed my PSU fan doesn t spin anymore but the fan on my video card spins fine Help will be greatly appreciated nbsp

A:No signal to my monitor unless I use onboard graphics

once youve insert a graphics card into the board it alot of time becomes the primary display. this setting can also be manipulated in the bios of some computer manufacturers. Your monitor is probably not getting a signal becuase the adapter is not enable in the computer or the settings of the card are not set to spec that can display on your monitor (resolution to high or low, refresh rate, etc)
 

http://www.techspot.com/community/topics/no-signal-to-my-monitor-unless-i-use-onboard-graphics.161721/
Relevancy 72.67%

Hello there I am doing some work for a friend on his after installing onboard graphics signal from card No card OR new PCI-e new-ish HP computer The specs it shipped with are HP Pavillion p p Aloe H-RS -uATX motherboard AMD Athlon II X processor GB DDR memory Integrated ATI No signal from PCI-e card OR onboard graphics after installing new card radeon HD graphics watt No signal from PCI-e card OR onboard graphics after installing new card Bestec power supply He wanted to upgrade the graphics for gaming and ended up purchasing an XFX ATI Radeon HD brand new Because it recommended a W power supply he also purchased a second-hand-but-tested L amp C brand W power supply He first replaced the power supply and reconnected all the elements of the motherboard and the hard disk and optical drive and then booted up and everything worked and displayed just fin with the onboard graphics BUT After installing the XFX ATI Radeon HD in the PCI-e slot he hooked the monitor to the DVI ouput on the card and rebooted the computer appeared to reboot normally and all fans and lights were running appropriately but no signal at all during the whole process from the graphics card Not too unusual right But He powered down took the graphics card back out and reconnected his monitor to the onboard graphics then booted back up This time even though it had booted successfully in this configuration just a few minutes previously with perfect monitor signal he got the quot no signal quot from the monitor We have since worked on this problem quite a bit to the extent of our abilities The XFX card works like a dream when inserted into my computer So does his monitor But no configuration of power supplies original or higher-powered second-hand or graphics output ports seems to be able to send a signal to his monitor Have also tried using a VGA cable in addition to the DVI or turning the monitor on before the computer Have also tried putting my old PCI cardin his computer and no output through it either The last confusing element of this problem is that the lack of signal is not consistent more like When I arrived to take a look at the computer today he booted the computer up with the new graphics card and the new power supply both installed and voila we got an image on the monitor showing the bootup screen and about five seconds of Windows beginning to boot Then boom it cut out with a quot no signal quot and we haven t been able to coax the signal back yet Any ideas There s only so much I can possibly do without a functioning display Please let me know any thought you may have as this leaves us scratching out heads If you need any more information from me please ask nbsp

A:No signal from PCI-e card OR onboard graphics after installing new card

Maybe a loose connection in computer or cable/monitor.
 

https://forums.techguy.org/threads/no-signal-from-pci-e-card-or-onboard-graphics-after-installing-new-card.976593/
Relevancy 71.81%

Running Windows 7 on my XPS 8500 and decided to ditch integrated audio for an Asus Xonar DSX PCIe sound card. The instructions clearly recommend disabling integrated audio in bios first, but I insisted on disregarding. Inserted sound card, then installed driver CD. Wouldn't recognize sound card. Soooo, I disabled integrated audio in bios and reinstalled the driver CD. Magically, the Xonar DSX worked like a charm. Lesson learned!

http://en.community.dell.com/support-forums/desktop/f/3513/t/19665961
Relevancy 71.81%

I have aGigabyte GA-MA785GM-UD2H motherboard on order. The onboard graphics are AMD HD4200 which I believe are pretty good. I also have a nVidia GeForce 8400 GS which I bought when I upgraded to a HD monitor.

Simple question which should I use when the new MB is installed?

A:New MB - use onboard graphics or old card?

Pretty much either or as they both perform about the same. The only advantage the 8400GS will have is that it won't use system ram.

http://www.sevenforums.com/graphic-cards/89052-new-mb-use-onboard-graphics-old-card.html
Relevancy 71.81%

hello. i just got a new graphics card for my pc but it not working cause of my onboard graphics card, i dont why but here is some sceens

http://i272.photobucket.com/albums/jj173/marshy211/Driver.jpg

http://i272.photobucket.com/albums/jj173/marshy211/Driver1.jpg
ty for helping
 

Relevancy 71.81%

and im getting a new asylum 64mb. few weeks ago I have borrowed a graphics card from a friend, from a newer compaq. This graphics card had a hook on the back of it, and didnt fit in my white pci slots. They were 2 black slots which I have no idea which they were but it didnt fit. Im wishing this new asylum card will work. Im just thinking will this graphics card fit in my compaw pressioro 5441. The older style kind, its a amd processor, and also has a onboard sound card ESS solo, stuff like thats, its all bunched togeather. but my question is will the new asylum fit into my white pci slots with that damn hook on the back of the chips.
 

A:I have a onboard sis 530 graphics card..

The video card you're talking about requires an AGP slot. Its a brown slot. Your computer doesnt have an AGP slot. It only has PCI and ISA slots. You will need to get a PCI graphics card.
 

http://www.techspot.com/community/topics/i-have-a-onboard-sis-530-graphics-card.19804/
Relevancy 70.95%

Can I run my on-board graphics and a video card at the same time on the same computer and if so how do I go about enabling both? I have a ASUS M4A785TD-V EVO motherboard that I installed a Galaxy GT430 1GB DDR3 128bit video card for which I had to disable the on-board Ati Radeon HD 4200 graphics to work! my question is can I enable both the on-board and the video card at the same time to connect one to a monitor using the vga connector and the other to a hdtv using a hdmi cable? If so how do I enable both? (I cannot use the hdmi on the grapics card because of the space on my computer case where the hdmi is is too tight to put a hdmi cable in! but the mother board has an hdmi connection that I can utilize, can this be done?)
 

A:Video card and onboard graphics?

After writing this post I found the answer in another post that i didn't see at first and found that doing it the way I wanted is not possible but I did some more research and found an adapter that can convert VGA to hdmi on this site: http://aluratek.com/vga-to-hdmi-1080p-adapter-with-audio which I think will solve my problem for now, my monitor is a 19" flat screen tv that doesn't have hdmi,only vga and I have a HDTV and I want to run my computer thru both and I think this adapter will do the trick. will keep you posted on the results of the project when I finally get the adapter. That link should be :http://aluratek.com/vga-to-hdmi-1080p-adapter-with-audio (adapter-with-audio)
 

http://www.techspot.com/community/topics/video-card-and-onboard-graphics.165427/
Relevancy 70.95%

I have an hp envy 750 dt desktop. If I added an PCI-E 3.0 graphics card will this automatically disable the onboard intel video? Is there any way to use a PCI-E 3.0 graphics card and the onboard video at the same time?

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/hp-envy-750-dt-graphics-card-with-onboard/td-p/5656508
Relevancy 70.95%

Hey guys Sorry unfortunately OK card display? no Onboard graphics but I am not very computer savvy and Onboard graphics OK but no card display? my comma key is jammed sorry again I have been messing with this computer for weeks with no luck I don t know exactly what kind of computer this is but it is a Gateway and it says GM Windows XP OS My motherboard is an MS- also says N not sure what that is The card I am trying to get to work is an nVidia GeForce LE Let me start by clarifying the problem for a long time the card worked great I have a habit of leaving my computer in sleep mode for a while and one day I heard a very loud pop possibly related and the next day my video card didn t work anymore The onboard graphics still work great -- UNTIL I go to the Netflix site I use this computer primarily to watch videos so this is a problem As soon as the website loads the mouse gets jumpy and so does video audio is flawless Even Hulu works perfect--Netflix is the only problem I tried upgrading Flash and Silverlight -- no luck there Not sure what else to do So this leads me to my real problem I think the computer is reading the card occasionally because when I have the card in but VGA connected to onboard graphics forgive my lack of diction there usually is no display I take the card out and the display is fine I connect the VGA also tried S-video to the card and still no display The computer is booting up fine it s just the dang card SO here is what my Googling has led me to thus far I tried updating my card driver but nVidia has to read the card in order to do that and it keeps telling me it isn t there when I connect through onboard graphics with card in so I guess sometimes the motherboard doesn t read it I have installed the chipset driver K T is the one I installed I even updated BIOS because it came up on the Gateway support site under my mobo although I have no idea what it did was supposed to do I have given up experimenting I don t mind buying a new graphics card but I d like to make sure this one is dead first Aaaaaany help would be greatly appreciated including a fix to the Netflix problem Thank you nbsp

https://forums.techguy.org/threads/onboard-graphics-ok-but-no-card-display.1025042/
Relevancy 70.95%

Hi All,

Is it possible to switch from onboard graphics and 4850. Now I am using Intel 945GCC motherboard and having HD4850 graphics card. I want to use 4850 while playing games and onboard graphics card for regular usage, So that I can save some power.
 

A:Using Onboard graphics card along with 4850

No, and the power requirement for the 4850 isnt taxing anyway.
 

http://www.techspot.com/community/topics/using-onboard-graphics-card-along-with-4850.128755/
Relevancy 70.95%

Well here is the deal. When I put windows XP on my PC my on-board graphics card stopped working. Well that was all fine and dandy because I installed a PCI-E graphics card. Well, its been about 3 years now and my graphics card is done. One of the capacitors blew up.

Now I am trying to reinstall my on-board until I am able to purchase a new graphics card. Well It is not letting me use my on-board graphics card. When I go to install it, it is telling me it cannot find the driver. I think this is happening because I uninstalled windows Vista, and that graphics card is only compatible with VISTA.

If there is any way to get around this please help! Thanks so much for taking your time to read this. Have a good day!

-Ron
 

A:Onboard graphics card (non-working)

When I go to install it, it is telling me it cannot find the driver.Click to expand...

If the onboard graphics are not working, how are you getting this message on the screen in the first place? In other words, if you are getting this message, the onboard graphics are not dead. When you installed Windows XP, you should have gone to the PC manufacturer's website to locate the motherboard chipset, sound, LAN, graphics, etc., drivers. If the PC is a custom or self built computer, then you would go to the motherboard manufacturer's website for these drivers. Anytime you install any version of Windows you should be doing this.

Try doing it now.
 

http://www.techspot.com/community/topics/onboard-graphics-card-non-working.150161/
Relevancy 70.95%

Hello, I have a quesiton about Onboard GFX
An Intel Core i5 3570K HAS an Integated GPU
There are motherboards that have Integrated GPU also
A) Can I use BOTH of them for gaming? (I know integated are bad, the question is "theoritical"
B) Can I use BOTH of them plus an integrated one?
Thanks
 

A:Onboard graphics card question

Wow no one? How to delete the thread?
 

http://www.techspot.com/community/topics/onboard-graphics-card-question.182315/
Relevancy 70.95%

Hi guys, I was wondering if anyone could teach me how to re-enable my onboard graphics card. I have a 8600GT installed in my PCIE slot and since it's damaged through displaying green/purple artifacts I want to disable it so that I wouldn't be forced to restart my computer manually everytime the artifacts appear; gets extremely annoying at some point. My onboard graphics card is a ATI x1250, I was wondering if a weak card like that can play 720p videos? I'm aware that games are out of the picture indefinitely, but I want to be able to work in photoshop and watch 720p videos. Thanks.
 

Relevancy 70.95%

Probably a dumb question (sorry) but trying to do some homework before my new system and monitor arrive.

Monitor (Dell U2713HM) will have multiple input possibilities, including DVI-D, Displayport and HDMI.

Graphics card (GeForce GTX 745) will have DVI-D and HDMI outputs.

Computer will also have onboard Displayport 1.2 output.

I assume I am going to connect the monitor and graphics card directly via DVI-D, but my questions are these:

Is there going to be any difference between using the onboard DisplayPort vs the graphics card DVI-D connection? If I use the onboard Displayport as the connection to the monitor, is this bypassing my graphics card altogether or is the graphics card working in conjunction with the DisplayPort in some way?

Thanks.
 

A:Which to use? Onboard DisplayPort or DVI-D on graphics card?

Personally, if you have a dedicated card then use the ports on that card. I would assume (only an assumption without knowing more detailed system specs) that the onboard display port is associated with an integrated APU / GPU setup.

As far as DVI-D and HDMI go, they are essentially the same as far as graphics are concerned, the main difference is that HDMI also carries audio (DVI-D is only video). If you have speakers connected to normal audio ports then it makes no difference. If you are using a screen / TV with its own speakers then HDMI is probably a better option as it means less cables.
 

https://forums.techguy.org/threads/which-to-use-onboard-displayport-or-dvi-d-on-graphics-card.1128983/
Relevancy 70.95%

If you have an onboard video card and then you install in a graphics card, will they work together? I'm getting a motherboard with a Geforce 6150, and a Geforce 7600GT. Will they work together, or will the Geforce 7600GT just do everything?
 

A:Onboard Video + Graphics Card?

The 7600GT will do everything. But that's ok if you want dual monitors because the 7600GT can support 2 screens.
 

http://www.techspot.com/community/topics/onboard-video-graphics-card.70194/
Relevancy 70.95%

Hi,

I have a Compaq SR5000 desktop with windows vista home premium and I wanted to install a second graphics card to use a 2nd monitor. I installed the 2nd card, however it automtically disables the onboard card which I don't it to do.When I look in device manager the onboard card doesn't appear anywhere or I can't get it to appear. There is an option in the BIOS to choose the main display , either th eonboard, pci or pci-E, so obviously I've tried the onboard option, but it still is disabled. I've got the drivers for the onboard card and tried to install them while having the 2nd graphics card in but that didn't work. Is there anything I can do to get this working or is it just not possible, any advice appreciated.
Thks.
 

A:How to enable onboard graphics card

This behavior is pretty typical on most systems. Generally if you want to run multiple monitors you can do it from the same graphic device, so in this case off the new add-in graphics card. Does the new graphics card not have multiple outputs? What is the exact card you both and what connections do each of the monitors have?
 

https://forums.techguy.org/threads/how-to-enable-onboard-graphics-card.1091728/
Relevancy 70.52%

If I have onboard graphics am I able to buy a new graphics card and put that in along side the onboard graphics or will that not? If it doesn't am I able to uninstall the onboard graphics?

Thankyou

A:Graphics card and onboard graphics

Welcome to the forum. Without your motherboard details I would say you can most mb will let you do it

http://www.pchelpforum.com/windows-10-a/127932-graphics-card-onboard-graphics.html
Relevancy 70.52%

I was wondering is it possible to use onboard graphics from my motherboard and use my graphics card at the same time? Also my motherboard states that the onboard graphics is dependent on the cpu. What exactly does this mean how does my cpu effect the onboard graphics

A:Can I use onboard graphics with graphics card

No, usually one can't use both onboard and add-in graphics adapters, by adding the plug-in card the onboard automatically gets disabled, at least on all the computers I've done it with.

Some newer CPUs do have things combined such as AMD CPUs that include ATI video, usual quick explanation of making things that way is for speed. AMD owns ATI Graphics.

http://www.sevenforums.com/graphic-cards/343573-can-i-use-onboard-graphics-graphics-card.html
Relevancy 70.52%

Hi guys, I'm a noob here, and was just wondering if there was any way to change my onboard graphics card in my laptop? My laptop is a Acer Aspire 5520, with the default Nvidia Geforce 7000m.

I'm usually alright with it, but I'm trying to start playing serious games (Arkham Asylum ), and I get this error "1x32 fb render target issue".

I really hope this is more of a software issue than anything.

Thanks,
Smartman

A:Changing Onboard Graphics Card in Laptop

  
Quote: Originally Posted by smartman


Hi guys, I'm a noob here, and was just wondering if there was any way to change my onboard graphics card in my laptop? My laptop is a Acer Aspire 5520, with the default Nvidia Geforce 7000m.

I'm usually alright with it, but I'm trying to start playing serious games (Arkham Asylum ), and I get this error "1x32 fb render target issue".

I really hope this is more of a software issue than anything.

Thanks,
Smartman


Have you looked to see if your current graphics chipset is capable of running your games. That error IS usually a software issue and you may not have to change at all
IF you have to change, it isnt the kind of change that most laptop owners (unless pretty handy and unless you dont mind voiding your warranty) can or should do.

Ken

http://www.sevenforums.com/graphic-cards/90943-changing-onboard-graphics-card-laptop.html
Relevancy 70.52%

My PC is showing just a black screen, I know it is not the monitor as I have checked it on another PC. I want to know if it is possible to install a seperate graphics card without disabling the onboard one. The reason I ask that is that cannot get anything from the onboard one, or will I have to replace the motherboard? If I have to do that will I lose everything I have on my PC. If I can replace would I then be able to disable the onboard one?

Any help really appreciated,
Dojo
 

Relevancy 70.52%

I decided to upgrade to a separate video card in my HP p6710f PC with ATI Radeon HD 4200 onboard graphics. The card I purchased is an MSI Radeon R7 240. I installed the card and although the fan ran there was no video output. I don't know if the card is DOA or another problem. If I disable the onboard graphics in device manager or in the bios before installing the new card and the new card is in fact DOA, how can I ever regain output from the onboard graphics again for output to the monitor? It seems to me I would be dead in the water with a black screen and no way to do anything. If anyone can help and knows the answers to this problem it would be greatly appreciated!

A:Once Onboard Graphics Are Disabled, What If New Video Card is DOA?

You need to disable onboard graphics after installing a video card and starting the computer for the first time.
Also make sure the video cable is properly connected to the new card.

http://www.sevenforums.com/graphic-cards/402633-once-onboard-graphics-disabled-what-if-new-video-card-doa.html
Relevancy 70.52%

I have a 1 yr-old Dell Dimension 5150 with on-board graphics and sound. I have recently purchased a GeForce 6600 128MB PCI-E graphics card to try and beef it up a bit.

I have inserted the card correctly into the PCI-E slot but my problem is in installing the driver. I'm certain that I have downloaded the correct driver, but as I run the set-up program I get the following error message:

The NVIDIA setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit.

And that's it - all my hopes of playing a decent game dashed at the first hurdle. Is there anyone who may be able to help?

Many thanks
 

Relevancy 70.52%

Would anyone happen to know if the onboard video should be disabled in the BIOS when installing a new graphics card in a PCIExp slot. If it is left enabled, the PC should find the new card and boot from it, correct?
 

A:Graphics card and onboard (Intel) Video

yes it should auto detect your setup...if it does not THEN you might need to enable/disable in bios
 

https://forums.techguy.org/threads/graphics-card-and-onboard-intel-video.1121305/
Relevancy 69.66%

I got an HDTV with an HDMI port today My motherboard Asus M N HD-HDMI has a onboard port for HDMI At first my pc would not run to the TV I looked through the BIOS and found an option called onboard GPU it was set to auto I changed it to always enabled I searched around and found the display control and of inconflict card graphics Onboard HDMI port set it towards the Onboard HDMI port inconflict of graphics card onboard port Onboard HDMI port inconflict of graphics card But it still would not want to send the display to the TV So after while I removed the graphic card Geforece GT suspecting that was the problem I did not want to remove it because I still play pc games After removing the card the port started to work I want to know is there a way for the display go to the onboard port while still having the graphic card installed and use it for my games and still route it to the port Also what would be the best settings for the TV I installed the drivers for the motherboard but the display isn t all the great If all else fails I can always use the TV for my xbox Thanks in advance System specs Windows XP bit AMD Dual core GB RAM no graphic card two hard drives nbsp

A:Onboard HDMI port inconflict of graphics card

The HDMI onboard must also be connected to the onboard Video circuitry as well.
By plugging in the addon (Geforece 6800 GT) Asus Motherboard setup has concluded that you do not require the onboard Video (anything) and turned it off automatically (and you cannot change that setting)

One option would be to have a addon Video Card that also has HDMI on it.
Or purchase a PCI HDMI compatible card.
 

http://www.techspot.com/community/topics/onboard-hdmi-port-inconflict-of-graphics-card.113746/
Relevancy 69.66%

I've just installed a genuine copy of Windows Vista Home Premium 64 bit & made sure my Nvidia 8800GTS was attached correctly to the motherboard at the time of installation. When Vista started up, I went into DXDIAG & it says that the graphics are 14mb integrated as opposed to 640mb Nvidia 8800GTS which I have connected.

I then tried inserting the driver CD but that didn't work either.

I'm all out of ideas. I'd appreciate any help regarding this, thanks.

Also,I just wondered... How is it even showing a display on the monitor if the monitor is attached to the 8800GTS?

A:[SOLVED] Vista Using Onboard Graphics Instead Of 8800GTS Card

In the BIOS I found a section called INTEGRATED PERIPHERALS.

Here is the list which was in that section:

SATA RAID/AHCI MODE
SATA PORT0-3 NATIVE MODE
USB CONTROLLER
USB 2.0 CONTROLLER
USB KEYBOARD SUPPORT
USB MOUSE SUPPORT
LEGACY USB STORAGE DETECT
AZALIA CODEC
ONBOARD H/W LAN
SMART LAN
ONBOARD LAN BOOT ROM
ONBOARD SATA/IDE DEVICE
ONBOARD SATA/IDE CTRL MODE
ONBOARD SERIAL PORT 1
ONBOARD PARALLEL PORT
PARALLEL PORT MODE


So as far as I can tell, there's no option there for enabling or disabling onboard graphics. I'm using a Gigabyte GA P35C DS3R Socket 775 8 Channel Audio ATX Motherboard.

http://www.techsupportforum.com/forums/f217/solved-vista-using-onboard-graphics-instead-of-8800gts-card-190817.html
Relevancy 69.66%

Hello all Please help me I purchased motherboard with the manufacturer number of MB G MB G GATEWAY MOTHERBOARD DESKTOP BOARD SOCKET AM on I had put it into my system and then proceeded to install upgrades from the Gateway website I saw there was a BIOS update file G P ROM available so I tried to update my BIOS Well after updating my BIOS with the ROM file that I had gotten from their website http support gateway com us en pro amp modelId but after update! working not graphics after card BIOS Onboard that the on board ATI graphics adapter is no longer working I tried to contact Gateway with no luck and them telling me that they don't recommend updating the BIOS I also tried to contact the place where I purchased the motherboard from and they said that they didn't have the original ROM The motherboard is also not listed on the Foxconn website either I am running Windows x Build and Onboard graphics card not working after BIOS update! I have also tried using a Ubuntu LTS live USB and that did not work as well As far as I can tell the BIOS will not even recognize it I am now currently using a NVIDIA GeForce GT graphics card that is plugged into the x PCI-E slot I have found modified ROM files that someone had done for this motherboard but I don't want to risk it And every forum and post I've come across has dead links to ones that someone has made a copy of the ROM file and uploaded from their motherboard If you need any information or if I did not make anything clear enough please let me know Thank you in advance for taking your time to read this and to help me My system is a Gateway DX - e with gb's of DDR RAM originally gb's of RAM but a gb stick blew out from a power surge hence why I had to get a new motherboard with a AMD Phenom II x Black Edition Deneb GHz Socket AM processor Once again thank you for reading this and thank you for the help in advance

A:Onboard graphics card not working after BIOS update!

Have you tried updating the driver for the on-board graphics?

http://www.sevenforums.com/graphic-cards/248998-onboard-graphics-card-not-working-after-bios-update.html
Relevancy 69.66%

My current card (Nvidia GeForce 7600 GS) apparently overheats extremely quickly, so I'm trying to find a new card. My question is that I have ATI video on board on my motherboard. Is it at all possible for that to conflict with a Nvidia graphics card, or am I just really paranoid?
 

Relevancy 69.66%

Hi all I just decided yesterday to hook up my old computer as a second computer for miscellaneous uses I originally used this computer as my main and only computer and had it all working Yesterday when I first booted up it said it couldn t find an OS so I found the CD in my files and reinstalled Windows After some setup of drivers and playing with it to get it running I realized I was still on the onboard graphics rather than the graphics card I have installed in it Even after running the drivers installer off the CD that came with Solved: of video onboard instead Graphics card Windows using the card I couldn t manage to find anything current online to use and setting BIOS to use the PCI graphics card Windows refuses to cooperate Edit I should note here that while booting up or while in BIOS setup the system outputs video Solved: Windows using onboard video instead of Graphics card ONLY through the graphics card but once Windows takes over it decides to use the onboard graphics for output instead I can set up the graphics card to display as a second monitor or even as the primary but the problem is that it refuses to allow any screen resolution other than x nor any color quality other than Lowest bit This is obviously a Solved: Windows using onboard video instead of Graphics card bit below my standards as when I used this graphics card on this computer previously I ran two monitors off the card both at x or better with bit color What I want the setup to be now is to disable the onboard and have the graphics card outputting x at bit color for one monitor The computer is an emachines T Desktop Relevant specs for the system below copied from the official site As far as I remember the only change or addition was the graphics cards though I may have added some RAM too Specifications CPU Intel Celeron Processor GHz w KB L cache amp MHz FSB Operating System Genuine Microsoft Windows XP Home Edition Chipset Intel GL chipset Memory MB DDR PC Hard Drive GB HDD Optical Drive x Max CD-ROM Drive quot MB FDD Video Intel Extreme Graphics D GL shared Network Mbps built-in Ethernet The graphics card I am attempting to use is a PNY Verto GeForce FX Video Card I have been unable to find any official site with documentation or specs but the TigerDirect page should have any info you might need Thanks in advance for any help and of course if you need more info that I forgot just ask nbsp

Relevancy 69.66%

Ahh the question mark got you interested eh Nothing gets people going like a good mystery Well the topic says it all really Absolutley everything about this computer is running horribly slowly When I found out that streaming videos such as youtube or running flash programs brought the computer to it s knees I figured it might be a problem with onboard card computer, graphics missing? Slow the graphics card though opening my e-mail client takes about minutes of waiting so who knows So I set out to find out Slow computer, onboard graphics card missing? what onboard graphics card is in this computer msinfo ran and under components gt display there s nothing Tried to run Speccy and there s no graphics card listed under Graphics just the Slow computer, onboard graphics card missing? moniter Everest comes through though Under GPU SiS Intergrated is listed So off I set to find some drivers for it I found some drivers for Slow computer, onboard graphics card missing? SiS Intergrated GPU s on SiS s site and on some rd party sites but all the ones I download every time I try to install them I get an error message saying quot The setup program cannot find suitable driver The setup program will now terminate quot Have to say I m getting sick of the sight of this damn work computer

A:Slow computer, onboard graphics card missing?

Was this work computer provided to you by your employer? If so, please bring it to an IT professional within your company. If not, use the Avira Rescue System. What happens with it, is that you run the EXE that you download, it creates a bootable CD, that you, well, boot to, and you can run virus scans with it.

http://www.bleepingcomputer.com/forums/t/340842/slow-computer-onboard-graphics-card-missing/
Relevancy 69.66%

Hello All,

Today I installed Windows 8 Pro with Media Centre in my laptop HP dv 2519tu. It was a clean installation. After instaaling laptop doesn't recognized Intel Onboard Graphics Card. When I right click on desktop it doesn't graphic properties in option. I think it may be driver problem.

Please help me in this problem. Your suggestions will be appreciated.

Thanks in advance.
Arvin

A:Intel Onboard Graphics Card not recognized in HP dv 2519tu

Try the drivers here:
[Drivers] HP ENVY 15-1XXX (INTEL)

http://www.eightforums.com/drivers-hardware/14811-intel-onboard-graphics-card-not-recognized-hp-dv-2519tu.html
Relevancy 69.66%

I just plugged my monitor into the new card (HD4770) and it works, did not disable or uninstall the integrated graphics. the integrated is a NVIDIA GeForce 6150SE chipset. The performance index went higher on paper but other than having better resolution I don't see a huge improvment. I still have video lag trying to watch streaming hd movies and my new camera (Panasonic Lumix ZS7) wont play video in HD over my computer. Must I disable and even uninstall the old integrated graphics too or am I missing something else?

A:I just installed a new graphics card, must I disable the old integrated graphics?

Have a look in your bios to see if it has an option to boot from pci-e or intergrated.
What is the motherboard you are using?

http://www.vistax64.com/graphic-cards/281312-i-just-installed-new-graphics-card-must-i-disable-old-integrated-graphics.html
Relevancy 69.66%

I recently purchased an Acer Veriton M G desktop which has an i - processor Windows Pro bit and Intel HD to PCI-E Graphics to HD graphics install disable how card Intel Graphics listed as the video card I also purchased a PNY nVIDIA Quadro FX PCI-E card for improved picture editing and home video viewing and editing I have already replaced the original wattt how to disable Intel HD Graphics to install PCI-E graphics card power supply to a watt Antec Truepower I had on hand and boosted the RAM to gigs from the original Question Am I getting any improvement in visual quality or system speed with the Quadro or is it a waste of money and I should just save up to buy a bigger video card This card was on sale for If I am getting improvement then I need to ask another question Question Instructions for the Quadro installation are as follows --Uninstall the existing VGA driver -Remove the existing Display Driver via quot Add or Remove Porgrams quot -Shut down your computer --Remove your Existing Graphics Board or Disable Integrated D Graphics Controller skipping instructions on how to remove existing graphics board -Systems with integrated also know as on-board D graphics may require you to disable the integrated D graphics system Consult the owners or vendor manual that came with your PC on how to properly do this So how do I disable the onboard just uninstall the driver The only driver how to disable Intel HD Graphics to install PCI-E graphics card I can find on the uninstall menu is quot Intel Graphics Media Accelerator Driver quot does this sound correct I did find the option in BIOS and it is currently grayed out I assume it will activate when it senses another graphics card Acer wants me to access their Pay for support system to learn how to disable the onboard so I m searching elsewhere now Thanks in advance for any help nbsp

A:how to disable Intel HD Graphics to install PCI-E graphics card

It's likely to be an improvement, but check it and see.
Onboard graphics are disabled in the BIOS (Try looking under "Integrated Peripherals" or something similar.
You probably don't need to do this, but it's nice to know how.
 

https://forums.techguy.org/threads/how-to-disable-intel-hd-graphics-to-install-pci-e-graphics-card.942178/
Relevancy 67.94%

I was wondering how to check to see if I have a dead monitor or video card.
My friends monitor doesn't show anything when the computer is started. Any ideas?
 

Relevancy 67.94%

First of all here are some specifications MOTHERBOARD ASUS P GC-MX PROCESSOR Intel Core Duo E GHz RAM X MB DDR - PC - VIDEO CARD RADEON X PRO PCI-E MB POWER SUPPLY W So I bought the motherboard processor ram and powersupply new a few months ago and finally got around to building the PC I ve built PCs before but I followed the instructions anyway and made sure PCI-E from or Monitor video receiving signal not card VGA onboard all the connections were made in the right places But my CRT monitor my LCD is broken at the moment is not receiving the video signal from either the onboard VGA or the PCI-E card which I bought new a couple of years ago I tried removing and reinserting the RAM removing everything nonessential removing and reinserting the CMOS battery and clearing the BIOS forgive my Monitor not receiving video signal from onboard VGA or PCI-E card improper terminological grammar and nothing seems to be working I don t hear any beeps or sounds at all and the Monitor not receiving video signal from onboard VGA or PCI-E card monitor light simply blinks as it does when Monitor not receiving video signal from onboard VGA or PCI-E card the computer is off I tried using my older motherboard ABIT IP- and the CRT receives the signal from both the onboard VGA as well as the PCI-E from that one There is a light on the motherboard which lights up to confirm that it is receiving power So what s the problem here I should mention one other thing too because it may or may not be related When using my older motherboard the computer boots to the Windows Vista screen and even occasionally lets me use Windows for a little while - mins but then simply reboots electrical problem perhaps When I touch the case I feel a slight shock sometimes I ve tried keeping the case both on the table as well as on the ground same thing happens so for now I m just wearing rubber slippers More info on electricity Where I live they use V and I ve made sure to adjust the powersupply for that I ve also tried V with a converter that I have my American CRT only works on but that doesn t seem to make any difference Also this powersupply is new and the older powersupply worked just fine too it was W I hope this isn t an information overload but as you can see I ve considered quite a few things and spent many hours configuring and reconfiguring with this stuff This hardware wasn t OEM either since I bought them separately and I made sure of the compatibility So is this a hardware failure or an electrical problem I would prefer just an oversight on my part or at the worst the latter because I m currently living in Pakistan and the hardware here is quite a bit behind what I brought with me from the USA Hope to get some help here and thanks a lot in advance for any advice at all PS I already looked through google but couldn t find anything that helped me out nbsp

Relevancy 65.79%

HiI am trying to disable Monitor Software Remote Graphics HP Blanking Disable the remote computer monitor blanking operation as the computer I am remtoely connecting to has a user on it and I want that person to see what I am seeing I have tried changing the rgsenderconfig Rgsender IsBlankScreenAndBlockInputEnabled to but this still does not appear to work Below is a copy of the configMy laptop is a HP EliteBook w with an Nvidia Quadro M driver version nbsp and I am connecting to a Z with Nvidia Quadro driver version Any additional information you need please let me knowAny suggestions would be HP Remote Graphics Software Blanking Monitor Disable greatly appreciated RegardsAndrew nbsp Hewlett-Packard Remote Graphics Software Sender Properties Uncomment a property to override its default HP Remote Graphics Software Blanking Monitor Disable value Sets the maximum image update rate that the Sender transmits to the Receiver If the value is set to zero the update rate will be unlimited Rgsender MaxImageUpdateRate Sets the preferred image CODEC Both the sender and receiver must support the specified CODEC The available CODECs are NC HP The default since release HP The default prior to release JPEG-LS Lossless available since Rgsender ImageCodec Preferred NC Enable or disable the sender disconnecting all HP Remote Graphics Software Blanking Monitor Disable receivers when the primary user logs out Rgsender IsDisconnectOnLogoutEnabled Enable or disable RGS connections if the iLO remote console is active If enabled simultaneous connections using the iLO remote console and RGS are possible which could allow eavesdropping See the User's Guide for more details Currently this property is only supported on Linux Rgsender IsIloRemoteConsoleEnabled Enable or disable easy login connections to non-blades If this property is enabled on a system with a locally attached monitor and keyboard such as a desktop or workstation easy login connections will be possible This could allow eavesdropping Normally this property should remain disabled See the User's Guide for more details Currently this property is only supported on Windows Rgsender IsAnonymousConnectionForceEnabled The methods for detecting image changes on the display All changes are sent to the receiver as image updates The GPU uses the GPU hardware to quickly compare one full screen to a previous full screen The Comparitron method uses the system's CPU to compare one full screen to a previous full screen The ChangeList method uses in Windows the RGS mirror-driver and on Linux the Remote Graphics X server extension to detect display changes Enter the methods in priority order of usage If a method is not currently supported in the system the next method in the list will be tried Rgsender PreferredDisplayMethods GPU ChangeList Comparitron Enable or disable the collaboration notification dialog Rgsender IsCollaborationNotificationEnabled Enable or disable session reconnection during session logout or Fast User Switching Supported on Vista and later Windows OSs Rgsender IsReconnectOnConsoleDisconnectEnabled Sets the time in seconds to wait for a system logon event to complete If the logon does not occur within ConsoleLogonTimeout the sender will be shut down Rgsender ConsoleLogonTimeout The timeout in msecs at after the connection will be closed Rgsender Network Timeout Error The timeout in msecs on dialog boxes such as the authorization dialog Rgsender Network Timeout Dialog Determines whether or not the RGS Sender will accept connections from RGS Receivers on all network interfaces or not Rgsender Network IsListenOnAllInterfacesEnabled If the Rgsender Network IsListenOnAllInterfacesEnabled property is set to these properties specify which network interfaces will be used to accept connections from RGS Receivers On Linux these generally correspond with eth eth etc On Windows Xp these correspond with the order specified in Control Panel - gt Network Connections - gt Advanced - gt Advanced Settings... Read more

A:HP Remote Graphics Software Blanking Monitor Disable

I should also mention that both machines are running Windows 7 64bit SP1 and V6.0.3 of RGS. Kind RegardsAndrew

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Remote-Graphics-Software-Blanking-Monitor-Disable/td-p/5081660
Relevancy 65.79%

Hey everyone I m in dire need computer to card up fine graphics Graphics post monitor, my doesn't boots any of some help with my PC The computer turns on fine and boots up can hear the windows start up tune Graphics card doesn't post any graphics to my monitor, computer boots up fine but I can t see anything on the monitor Here s the details I was playing a computer game on friday and during that it crashed I have no idea if this is when things started or not but I restarted and it was fine On sunday I had another crash only the screen flickered once or twice and there were green pixel lines going from top to bottom of the monitor about inches apart in a perfect pattern When I restarted there were no graphics on the monitor The light was flashing indicating it was on power saving mode I took the computer apart unplugged everything and put it all back together and for whatever reason it worked fine for about hours The next day I turned the computer on and it loaded fine but shortly after there was the return of the green pixel lines with the added addition of the top left corner of the screen being filled with green pixelated triangles in a perfect pattern These were flickering furiosly I tried restarting my computer and again I got no graphics posted to the monitor However the computer booted up fine and I heard the start up tune and minutes later I shut it down by pressing the quot Power Off quot button on my keyboard I tried another monitor and again got nothing I then tried taking the computer apart and putting it back together again only this time it didn t help I ve taken my graphics card out put it back in used both the monitor cable ports left the computer off all night without the power cable in and I can t get anywhere I ve taken my old card GeForce GTX out and borrowed my landlords GTX which is working fine at the moment I would go and buy a new card but I don t want to risk this happening again if I don t know why it s happening Fingers crossed I don t break my landlords graphics card by putting it in my pc I would like to know what s causing this if it is my graphics card or whether my motherboard will just start eating future graphics cards A friend of mine had a scenario not long ago where his motherboard kept breaking his graphics cards some how How would I know it would be safe to splash out on a new card My computer worked fine for years until now I d also like to point out that the fans didn t go into faster mode at any point they all remained pretty calm so I don t think it was overheating My computer s spec is OS Windows XP GPU GeForce gtx DVD Sony DVD-RW Q A Networking Nvidia nForce Networking Controller Processor Intel r Core tm Quad CPU GHz Motherboard nForce i SLI PSU Enermax Galaxy watt Thank you everyone nbsp

A:Graphics card doesn't post any graphics to my monitor, computer boots up fine

Its usually just the graphics cards, they do fail especially if they overheat - then video card fan not speeding up might have been the problem - most are dynamic and should actually speed up under load. Depending on the manufacturer of your 8800GTX you might be able to get it replaced under warranty if they have a 3 year or greater warranty.
 

https://forums.techguy.org/threads/graphics-card-doesnt-post-any-graphics-to-my-monitor-computer-boots-up-fine.843395/
Relevancy 64.93%

I have recently upgraded my graphics card but the old SiS graphics card is causing interference but i don't know how to disable it. i do not know the chipset but the motherboard is manufactured by Elitegroup and its model is KS7OM. Thanks.
 

A:I need advice on how to disable a sis graphics card.

first, what do you mean when you said UPGRADED my video card??are you talking about onboard video adapter,an older card,or 2 cards on one system.
most likely i think you are referring to onboard chipset-usually there are 2 option to disable an onboard vga card.either you can check the bios and disable it from there depending on which bios you have the second is to change the jumper on your mobo if the option is present to disable it from your mobo.you might want to try googling a bit to find out about your mobo.to find out which mobo you have first you'll need to find out which chipset you have intel,via???? then download a utility which will help you check your mobo.
 

http://www.techspot.com/community/topics/i-need-advice-on-how-to-disable-a-sis-graphics-card.18372/
Relevancy 64.93%

Hi, I need to disable my onboard video card through BIOS, to install my new graphics card. How would I go along doing so?
 

A:How do I disable my graphics card through BIOS

Hello and welcome to Techspot.

You could try reading your mobo manual.

If you don`t have one you may be able to download one from your mobo manufacturers web site.

Failing that during bootup try pressing either the F2 or delete keys to get into bios.

Then just search around to find your onboard graphics disable it then save and exit.

Regards Howard :wave: :wave:
 

http://www.techspot.com/community/topics/how-do-i-disable-my-graphics-card-through-bios.20114/
Relevancy 64.93%

My laptop supports two graphics card AMD Radeon(TM) HD 6470M and Intel(R) HD Graphics 3000 and after a while the AMD got corrupted(I already updated it but I think it's hardware problem) and causes blue screen so I disabled it in safe mode(because it uses the intel one).

I tried a clean install of Windows 7 and during installation AMD causes blue screen because it gets enabled.

And now I want to try a clean install of the Windows 10. Question is, is there anyway I could disable the graphics card permanently?

I use a 64-bit Sony Vaio Laptop VPCSB26FG with a Windows 7 Home Premium OS. Thanks a lot!
 

A:How to permanently disable graphics card

The simple solution is to remove the failing card :grin:
 

http://www.techspot.com/community/topics/how-to-permanently-disable-graphics-card.217519/
Relevancy 64.93%

Hello, I disabled my integrated graphics card from BIOS by mistake i dont know what i was thinking and now when i open my laptop the screen doesnot view any thing only black screen i searched google and viewed some videos but found no clue even tried to remove the cmos battery to reset the BIOS to default but it didn't, i hope to find a solution here. Thanks

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y50-disable-integrated-graphics-card/td-p/3349856
Relevancy 64.5%

Friends,

Lately I have been having graphics problems in games. There are these " artifacts", wierd shapes, triangles, ect that appear and "shot" through my screen. it is hard to explain what it looks like, except that it is NOT normal.

It is hard to say when these appeared. I have recently got a different monitor. It is not new. It is a Dell CRT monitor. I replaced 1 CRT with another because I am cheap .

I have the latest drivers, I think, for my graphics card ( GeForce 5700 LE ). Not great , but not terrible. I play the games with either low or medium settings. I ran a benchmark test that was terrible.

Any ideas as to weather it is the card or monitor?
 

Relevancy 64.5%

Is it safe to disable the built in graphics card in my Dell laptop?

The reason i want to do this is to figure out where a noise is coming from.

Thanks

fsuk
 

Relevancy 64.5%

Hello! How to disable integrated graphics card (AMD Radeon R7) on Y700 acz. I think some old game engined (Word of Warcraft) does not support the crossfire technology, but the primary card is R7 in Radeon settings and i can't change.I can disable in the BIOS just dedicated card (R9 M385). Any ideas?Sorry for English.

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y700-acz-disable-integrated-graphics-card/td-p/3371378
Relevancy 63.64%

i own a Lenovo Z750 and it has 2 graphics card the intel integrated card and a nvidia geforce 520m
i downloaded aion online and you have to launch it from the NC launcher so .... it doesn't have an .exe file so the normal right click and choose the graphics card won't work so i went to bios to disable the inter card but i only found two options

♦the optimus
and
♦ uma only

please help me ..

A:no option in BIOS to Disable integrated graphics card.

Hi,

Have you looked in Device Manager under Display Adapters?

Navigate to: Start>Computer>System Properties>Device Manager

Expand display adapter and right click the correct GPU and disable.

Hope this helps

cheers

Dave

http://www.sevenforums.com/graphic-cards/298049-no-option-bios-disable-integrated-graphics-card.html
Relevancy 62.35%

Today I got a new samsung 27" monitor and whenever I run a game the monitor will shut off then back on about every 15-20 seconds. I have a DVI to VGA (VGA into the CPU and DVI into the monitor) plugged in, and am using a 1920x1080 resolution. I have tried lowering the resolution to 1280x720 and it still shuts off. my old monitor is an 18.5" and it runs perfectly on my CPU. my CPU is an HP Compaq 8000 Elite USFF Desktop Core 2 Duo E8500 3.16GHz 8GB 250GB w/ Win 7. I am not a big computer guy, and cant tell if this is because of my CPU graphics card not being able to handle the high resloution or the Monitor itself. all help is appreciated. thanks

A:monitor shutting off not sure if its my graphics card or the monitor

Try un-plugging PC and monior, and then re-plugging.
Then load defaults in BIOS.
Check if monitor is still being detected as the old one.

New monitor, can be defected, try on another PC/laptop.

http://www.sevenforums.com/performance-maintenance/374472-monitor-shutting-off-not-sure-if-its-my-graphics-card-monitor.html
Relevancy 62.35%

hey guys sorry about the enable it when cannot device but works Graphics card this - start disable problem and goofy title I was trying to get as much in as possible I have recently Graphics card problem - cannot start this device but when disable and enable it works built a custom system for music storage gaming and word processing I have been having tons of problems with this system One of my ram sticks was bad after I tried different xp install disks I figured it was a hardware problem my netgear card isn t working or is just a P O S and now my graphics card is giving me headaches The graphics card I am running is a EVGA gs mb - PCI express it was a good deal at the time When I boot up the computer and enter windows the graphics card doesn t work and I am running off the Graphics card problem - cannot start this device but when disable and enable it works stock drivers from XP If I go to the device manager I get a quot Device cannot start code quot message After uninstalling and installing the drivers various times and updating the drivers with new releases from Nvidia its still not working properly It will work right after I install the drivers for it but if I restart my computer it won t work again I figured out that if I restart my computer and go to device manager and click quot disable quot and the click quot enable quot the graphics card works fine but won t allow me to adjust any settings for a few minutes or until after I run a game like Metal of Honor or Battlefield Does anybody know what gives mikeym nbsp

A:Graphics card problem - cannot start this device but when disable and enable it works

https://forums.techguy.org/threads/graphics-card-problem-cannot-start-this-device-but-when-disable-and-enable-it-works.597443/
Relevancy 62.35%

According to the owners manual the first few lines of addon on integrated Vostro No to using PCIe 270S disable graphics way card when the BIOS System Setup section indicates that No way to disable integrated graphics on Vostro 270S when using PCIe addon card the No way to disable integrated graphics on Vostro 270S when using PCIe addon card amount of memory dedicated to the integrated graphics and the ability to enable or disable it are options in the BIOS nbsp The BOOT method is Legacy instead of UEFI the BIOS has been reset default options loaded etc and no where are the specified options visible nbsp BIOS is version A which I believe was the version that it was shipped with and the latest nbsp This is not a huge issue but the fact that the option is missing from BIOS and needlessly using a bit of RAM is enough to see if anybody is aware of an issue nbsp I haven t contact support yet as I just got the box yesterday as a replacement machine at work nbsp I have already torn the thing apart looking for the old school jumper method of turning off the integrated graphics with no luck there either

A:No way to disable integrated graphics on Vostro 270S when using PCIe addon card

Just a bit more information.  The add-on card is a NVidia NVS280 or NVS285 LP with pigtails to dual VGA.  With monitors hooked up to that card it has worked perfectly fine so far.  I haven't tried one monitor on the integrated card and the other on the card to verify both are still working, but the Intel integrated graphics still shows up in device manager and is using system memory.

http://en.community.dell.com/support-forums/desktop/f/3515/t/19489217
Relevancy 60.2%

I have recently bought a AOC spectrum moniter. Now when i play games, or play video clips, the images are blocky. There were ok with my old 15 inch moniter. I have a 16mb Vodoo 3 card. Unfortuanatly i got the pc second hand, and have no instructions. Is there any thing i need to adjust on my card to improve the graphics? I am using an AMD K6500 pc, 128mb Thanks for your help
 

A:Monitor/Graphics card

did you install the new monitor .inf file. Check and make sure under display that the monitor in recognized correctly.
 

https://forums.techguy.org/threads/monitor-graphics-card.35028/
Relevancy 60.2%

I have an HP Envy Desktop 750-114 and an HP V242h monitor. Colors, etc. on the monitor are flat, dull and almost gray. It's been like this since we got the computer about a year ago. I tweaked the contrast, etc., on the monitor and it's a little better, but still not great. So, do I need a new graphics card for the computer, or a new monitor? I'm afraid if I buy a new monitor, it'll be the same, dull and flat. If a new graphics card is needed, what would be a good one, and would I need a new power supply? My son does like to do gaming, so one that is good for gaming would be preferred. Thanks in advance!

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Do-I-need-a-new-monitor-or-graphics-card/td-p/5797770
Relevancy 60.2%

Hope this is the correct Forum. I want to buy an LCD Monitor Samsung Syncmaster 205bw -20inches or 225bw-22inches wide screen. Their native resolution is 1680x1050
My Graphics card is Nvidia GeForce 6150 LE
Does my card support a wide screen, also can I get/use the Native resolution with no problems ?
I am not a Gamer but do a lot of Image editing with Elements 4 & 5
Thanks Jester2
 

A:LCD Monitor & Graphics card

Single-Link DVI Support
Able to drive flat-panel displays up to and including 1600x1200. ( nvidia website )
 

https://forums.techguy.org/threads/lcd-monitor-graphics-card.569029/
Relevancy 60.2%

Hi all, new here.
I recently purchased a Chimei 22 inch wide screen monitor. When I hooked it up to my computer the images aren't really all that great, with the small text being blurry. When I try to change my display settings there is no option for 1680 x 1050. Is this because of my graphics card? How do I find out if my graphics card will support this monitor? Did I make a bad purchase?
Any help appreciated.
 

A:New monitor and graphics card???

First off, don't set the Monitor to the MAX.
Why because if your Video Card can't go that high you won't be able to use 1680x1050. In this case replace video card.

What video card are you using? This is not onboard video, better not be?

1. Go into Windows Control Panel and click on Display
2. Select Appearance Tab
3. Click on Effects
4. Check box: Use the following method to smooth edges of screen fonts
5. Go from Standard to ClearType (for LCD Monitors)
6. Go into Settings
7. Click Advance
8. Click on Adapter then on List all Modes

In the List all Modes you'll see how high your video card can go. Don't worry about refresh rates with LCD monitors. Those are for CRT tube.

Word of caution
Make sure Color quality is set to Highest (32-bit)
Don't max out your video card to support the LCD panel.
 

http://www.techspot.com/community/topics/new-monitor-and-graphics-card.75100/
Relevancy 60.2%

Hi all I am currently looking to buy a new pc for office use and the three main criteria are- The pc can handle or monitors connected to it It can comfortably operate several programs open at the same time using typical office applications email word excel pdf browser etc I want to have the 3+ up? Which monitor a for set card graphics programs open on several screens at the same time for convenience and time saving The total cost is reasonable I have been talking to Dell about taking one of their Precision systems a T with a xeon chip Ghz GB Ram Vista Business x and to be Which graphics card for a 3+ monitor set up? connected to of their quot S W Full HD monitors The salesman initially quoted for using the MB Nvidia Quadro FX card I later asked and i m not sure why i did this if he could confirm that this card is suitable He later wrote back that this card was probably not suitable after all and that i should go with the more expensive amp MB Nvidea Quadro NVS card So my question is is the FX adequate or not If anyone can offer advice i d be most gratefull thank you nbsp

A:Which graphics card for a 3+ monitor set up?

... Honestly. **** Dell.

For running 4 monitors, you need:
a ~120€ motherboard (high quality costs a little extra)
a ~70-150-200 € CPU
a pair of ~30 € graphics cards.
Where do you live?
 

https://forums.techguy.org/threads/which-graphics-card-for-a-3-monitor-set-up.833070/
Relevancy 60.2%

replaced the stock fan on nvidia 6600gt graphics card and i can't get the monitor to come on. fan and all other components work but no monitor. reseated the card a couple of times but no go. any ideas? i'm sure i hooked everything up right.
 

Relevancy 60.2%

I have a compaq computer(Athlon 64 3500+) that has a built in graphics card. I was looking into throwing in a XFX GeForce 7600GS 256MB PCI Express x16 Video Card (Dual DVI S-Video). I have a pci-e slot open so I know that isn't going to be a problem. The only thing I am worried about is that this new graphics card isn't going to have a vga output, which is the only connection my monitor has. Will I still be able to plug my monitor into the original vga output slot while using my new graphics card? If not, does anybody know how well a dvi to vga adapter works?

Thanks for the help!
 

A:New Graphics Card = New Monitor?

wileymiester said:

I have a compaq computer(Athlon 64 3500+) that has a built in graphics card. I was looking into throwing in a XFX GeForce 7600GS 256MB PCI Express x16 Video Card (Dual DVI S-Video). I have a pci-e slot open so I know that isn't going to be a problem. The only thing I am worried about is that this new graphics card isn't going to have a vga output, which is the only connection my monitor has. Will I still be able to plug my monitor into the original vga output slot while using my new graphics card? If not, does anybody know how well a dvi to vga adapter works?

Thanks for the help!Click to expand...

yeah you just use an adapter to the new card, if you bought retail box t should have come with one.

http://image.compusa.com/prodimages/51/90ef7954-cfd3-11d6-a106-00805fbbb715.gif
 

https://forums.techguy.org/threads/new-graphics-card-new-monitor.537102/
Relevancy 60.2%

My motherboard is a Gigabyte GA-EP -UD It does not appear to have card? graphics monitor Add third - an quot on-board quot vga My graphics card is a GeForce GT I am using both digital outputs for the two monitors present My monitors are a pair of Asus VS H-P I am not a gamer but Add third monitor - graphics card? do appreciate a crisp display I mainly run general business programs such as word processor and spreadsheet internet browser email and sometimes enjoy watching a movie or video I wish to add a third monitor Two questions- Would using my old Acer P w be a mistake in the long run in that I can get another Asus VS for under What would the least expensive graphics adapter solution be that would maintain comparable quality I'm afraid I have been away from tech for too long and am a bit on the penny-pinching side right now I suspect that I should purchase the new third monitor but am completely lost when it comes to the adapter card- Thank-you very much for your consideration and expertise

A:Add third monitor - graphics card?

I'm not personally into multiple monitors. (My main system uses a 28" UHD one.)

This card looks like it'd work:

EVGA GeForce GT 710 DirectX 12 02G-P3-2717-KR 2GB 64-Bit DDR3 PCI Express 2.0 Video Card - Newegg.com

(eVGA GT 710). I suggest replacing the old Acer since it only does 1680X1050. With a third VS228H-P. you'd need a cable that works with the min HDMI port on the card. There are cheaper GT 7XX cards, but I'm not sure whether any support monitors.

http://www.tenforums.com/graphic-cards/42582-add-third-monitor-graphics-card.html
Relevancy 59.34%

I'm having a very wierd problem.

Basically when I start my PC up and get to the windows logon screen - my monitor is switching on and off quickly. Like it cannot keep up with a refresh rate. The screen also sometimes goes white.

If I manage to log on to the PC, after the PC has settled the issue stops - so im not sure if it is some odd software causing it or whether it is something to do with the monitor.

I Have a CTX TFT Monitor and a Radeon X800 Pro using the Omega drivers (which I have used for years)

I hadn't upgraded the omega drivers any time before this started, and I have the most up to date drivers now and the issue is still going on.

Any help appreciated,
 

A:TFT Monitor / Graphics Card - Turning on and Off

Have you tried waiting for the computer to load up, and then turning the monitor on? Try giving it a couple of minutes to make sure.
 

https://forums.techguy.org/threads/tft-monitor-graphics-card-turning-on-and-off.510199/
Relevancy 59.34%

Hi,
 
Anyone out there have experience with/ recommendation of a 4 monitor graphics card? With the possibility of getting 2 of these cards and expanding to 8 monitors? Linux compatible?
 
I know it's a bit of an ask, but I'm going around in circles on the interwebz.
 
Thanks.

http://www.bleepingcomputer.com/forums/t/573895/recommend-a-4-monitor-graphics-card/
Relevancy 59.34%

I'm trying to help a friend out. This is the problem she is having:

"I can turn on screen and the power light just flashes. We tried to hook up another monitor and it would not work either. The screen if turned on will flash occasionally white then all black. Something is not connecting somewhere. Someone suggested it may be the video card."

Or is there something else we should be looking at?

I have been asking about another issue related to this question, but decided this might be the place to begin. That thread is found here: http://forums.techguy.org/hardware/791490-video-card-computer.html
 

A:Monitor not working - graphics card??

What is the system itself doing? Aside from the monitor is the computer itself booting up without a hitch? Generally where there is a bad piece of hardware you're going to hear something in the beep codes? Anything? A bad video card will usually stop a system before it starts? Jazz
 

https://forums.techguy.org/threads/monitor-not-working-graphics-card.792412/
Relevancy 59.34%

Hello I've been having a whole bunch of problems with my AMD Radeon HD graphics card and my Dell monitor which I don't know the model of To start off my PC started to overheat Issue Monitor & Card Graphics and shut down every so often so I opened it up and cleaned everything out to my surprise it actually worked While I was cleaning it Monitor & Graphics Card Issue I removed my GPU and removed the dust from the fan as well then I put it back in again Then yesterday morning I woke up and powered on the PC the fans and everything else was working with it However there was no display on the monitor it just kept going into some sort of 'Power Saving' mode I checked the GPU and the fan was working fine but I still thought it was the GPU so I was planning on buying one after Christmas Then just now I remembered that I have a working PC in another room so I hooked it up to the monitor and plugged everything in and powered it on but there was no display on the monitor it just did the same thing and went into the power saving mode again The GPU in this PC is integrated however my new PC is separate So basically I want to know what the problem is and how I should solve it Should I go ahead and buy a new GPU for my PC or should I buy a new monitor Is it the monitor GPU Thank you I hope to get a reply soon

A:Monitor & Graphics Card Issue

Hello HazzaB,

I would be surprised if it was the monitor. The other PC you mentioned connecting it to, does that have it's own monitor? If yes, can you try that monitor on your main PC?

How are you connecting the monitor? VGA or DVI cable? Can you try a different cable?

Paul.

http://www.sevenforums.com/graphic-cards/315845-monitor-graphics-card-issue.html
Relevancy 59.34%

I have a new computer with Vista Home Premium x64. I used a dual monitor graphics card in my old computer with Windows XP. Took the card out and install it in my new computer and updated the driver. But, performance is poor. For example I can't use Vista Aero.
I would like to buy a new, relatively inexpensive dual monitor graphics card which is compatible with Vista premium x64. Any suggestions?

A:Dual Monitor graphics card

What card do you have, maybe it's not old.

http://www.vistax64.com/graphic-cards/157147-dual-monitor-graphics-card.html
Relevancy 59.34%

i installed a new graphic card after uninstalling the old one. then when i turn computer on it started then shut down and won't start again after that. the computer starts but the monitor doesn't like turn on. i also notice that the power supply recommend for my graphic card is 250w and i have 230w. is it a power issue? also i removed the card and try to start ma computer without is and it still doesn't work plz help it is not even really my computer
 

A:Monitor not starting after new graphics card

Make sure you have connected the power supply to the video cards if there is such a connection. Since you only have a 230 watt supply, your system may not support the new card anyway. What is your system's specs and who makes it?
 

http://www.techspot.com/community/topics/monitor-not-starting-after-new-graphics-card.105625/
Relevancy 59.34%

I am trying to install an ATI rage fury 128 pro graphics card. When I finish installing it, my monitor goes nuts. I get three(3) of everything and my Icons have no color(show white) I have a CTX monitor which works fine with a 3D Yamaha card. Can anyone help me with this ? Is it the Monitor, the card, or what? I have downloaded the latest drivers for the card. Until I did that I just got a black screen on the monitor. I realize this isn't the greatest card in the world, but I don't want to spend a lot of money on another card and find out it won't work either. Any help will be greatly appreciated.
 

A:graphics card/monitor problem

First thing to check is does your mobo support it.
 

https://forums.techguy.org/threads/graphics-card-monitor-problem.144681/
Relevancy 59.34%

I recently bought the components to put together a new PC I managed to assemble everything ok and install windows no problem It all seemed to be working fine but after a few hours of running the monitor goes black The monitor power light is still on not in standby but the screen is off This will happen normally after an hour or so If I switch the monitor off then on again it will return to normal but after a few minutes it will again switch off Nothing else is affected when it turns back on the screen is exactly as normal It will happen when in BIOS or in Windows XP so I m guessing its not a windows problem or drivers issue I flashed the MOBO BIOS but this had no effect So I m guessing the problem is either with my monitor or graphics card The systems details are Graphics Card - XFX GeForce GT Monitor - Acer AL WA Any help would be Problems with or monitor card graphics much appreciated nbsp

A:Problems with monitor or graphics card

It could be as simple as the power saving option causing it.

Right click on your background and select properties, then screensaver, then power, and set turn off monitor to never.
 

http://www.techspot.com/community/topics/problems-with-monitor-or-graphics-card.48569/
Relevancy 59.34%

i just bought a quot FIC Powered by ATI XT MB Video Card quot from pcdirect com It hasnt worked once since i took it out of the box As soon as i plug the monitor into it the monitor goes black and the power light turns orange instead of green I plugged my old nvidia geforce FX in and everything works fine I thought maybe it was a driver issue but shouldnt the Blank Graphics Monitor = Card New monitor still work I was on the phone with a dell tech guy for two hours trying EVERYTHING including pulling out the New Graphics Card = Blank Monitor motherboard battery to clear its memory or something like that anyway does any have an idea as to why this isnt working or is it just defective thanks in advance i have to get to school so i wont be able to reply until later tonight o and add this to the equation i just tryed to put it into my year old Dell and it works FINE The other ocmputer is a year old Dell WTF this c auses me to believe that its not a defect but infact something with the monitor It goes into a power sleep mode everytime it connects so it must be Its a dell flatscreen nbsp

A:New Graphics Card = Blank Monitor

nymb: I don't know much about flat screen monitors, but I do know that they have a native resolution and trying to run them on a different resolution can give you problems. Could this be your problem?

I get from your post that you have 2 computers and 2 monitors. The card will not work on the 4600 with the flat screen, but it will work on the 4100 with a different monitor. Will the card work on the 4600 with the monitor from the 4100?
 

https://forums.techguy.org/threads/new-graphics-card-blank-monitor.302398/
Relevancy 59.34%

I don?t know how better to explain than with pics:

http://img30.imageshack.us/img30/7059/p1010125rgb.jpg
http://img34.imageshack.us/img34/3509/p1010126c.jpg

When I started my pc that?s waht I got. I checked the cables and saw that the one from the monitor was loose ? the thingy on pc was actually loose. I am actually missing one of these little ones, and the other one got loose:



I tightened it ? same thing.
Bought new ones ? same thing!
What can be the problem? The contact or something just died on me?

Thx in advance!
 

A:Graphics card, monitor or just cables?

Those are just screw anchors, and one or more may be stripped. They have no bearing on electrical or video problems except to keep the video cable connected and secure. Looks like the computers video card is dieing... besides the stripped screws. Try another monitor to be sure
 

http://www.techspot.com/community/topics/graphics-card-monitor-or-just-cables.129978/