Windows Support Forum

AMD mobile graphics switching "Enduro" technology has problems...

Q: AMD mobile graphics switching "Enduro" technology has problems...

Recently this has come to light during my own research into mobile GPUs that are currently available on the market as I ve been considering replacing my aged i - M laptop with M GPU I had switching technology mobile graphics AMD problems... has "Enduro" even placed an order and paid for a machine but after reading much about the issue none of it from AMD themselves other than quot For those with M - Enduro issues are also being investigated quot by http twitter com CatalystCreator back on the th of August I cancelled before the unit was completed and shipped This is mostly a problem for Clevo EM EM based laptops which AMD mobile graphics switching "Enduro" technology has problems... have no way of bypassing the Enduro graphics switching unlike Alienware products which have a hardware switch Basically there is something very wrong with this immature technology Users are finding under utilisation of their cards for example Battlefield person multiplayer AMD mobile graphics switching "Enduro" technology has problems... fps dips with AMD mobile graphics switching "Enduro" technology has problems... lower recorded GPU utilisation when it should be going flat out Even worse is when the graphical settings are lowered to try and allow for more fps to be pumped out by the GPU the situation does not improve It is as if the Enduro tech is deciding that the lower workload required at lower resolution or graphical settings means it can lower utilisation further This means that someone with FPS issues at Ultra settings can drop to Medium settings and not see any improvement in output Threads about this http www rage d com board showthread php t http forums guru d com showthread php t http hardforum com archive index php t- html And many others Facebook awareness page https www facebook com Amd mEnduroUtilizationAwareness ref ts Many owners of systems with M graphics cards are now concerned with AMD s reluctance to comment on the problems that they are just going to try and sweep it under the carpet and move on to the next generation of GPU with the next generation of Enduro perhaps one that works No one is exactly sure if the problem is even something that can be overcome with a software driver or whether it is a hardware issue that the Clevo based laptops are stuck with nbsp

Relevancy 100%
Preferred Solution: AMD mobile graphics switching "Enduro" technology has problems...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: AMD mobile graphics switching "Enduro" technology has problems...

The silence from AMD on this is deafening. I honestly can't in good conscience recommend anything AMD related unless they get this situation fixed. The fact that they have tried to silence other manufacturers on forums says a lot. I would feel much better if they were just open about it and said what they are doing to fix the problem.

http://www.techspot.com/community/topics/amd-mobile-graphics-switching-enduro-technology-has-problems.185018/
Relevancy 33.11%

Intel and Micron held a joint press conference earlier today to announce a breakthrough memory technology called 3D Xpoint (pronounced 3D crosspoint) that's up to 1,000 times faster (read speeds) than today's NAND, features 1,000 times better endurance and is...

Read more
 

A:Intel and Micron announce 3D Xpoint, a new memory technology that's 1,000 times faster than NAND

I hope this really brings about the death of the hard drive. And it can't come soon enough.

Gimme a 1 TB Xpoint SSD that doesn't break the bank and I'm sold.
 

http://www.techspot.com/community/topics/intel-and-micron-announce-3d-xpoint-a-new-memory-technology-thats-1-000-times-faster-than-nand.217327/
Relevancy 21.5%

My laptop supports two graphics card AMD Radeon(TM) HD 6470M and Intel(R) HD Graphics 3000 and after a while the AMD got corrupted(I already updated it but I think it's hardware problem) and causes blue screen so I disabled it in safe mode(because it uses the intel one).

I tried a clean install of Windows 7 and during installation AMD causes blue screen because it gets enabled.

And now I want to try a clean install of the Windows 10. Question is, is there anyway I could disable the graphics card permanently?

I use a 64-bit Sony Vaio Laptop VPCSB26FG with a Windows 7 Home Premium OS. Thanks a lot!
 

A:How to permanently disable graphics card

The simple solution is to remove the failing card :grin:
 

http://www.techspot.com/community/topics/how-to-permanently-disable-graphics-card.217519/
Relevancy 20.64%

Hey guys, I have searched a lot of forums but haven't found any relevent answers. I am sorry if this is a repeat.

What happened is that I disabled my nvidia graphic card from the control panel and it was too late until I realised my mistake as I had already pressed the restart button. Now I try to start my pc but all that happens is that I hear the sounds I always hear but nothing appears in the screens. I have tried several monitors. I have unhooked the monitor from the nvidia and connected it to the onboard gpu and still no luck. I tried resetting the bios but that didn't help either.

CPU:
Intel Core 2 Duo E8400 @ 3.00 ghz

GPU:
ZOTAC Nvidia GeForce GT610 Synergy Edition.
 

A:I disabled my Nvidia Geforce GT610 graphics card accidentally and now I can't see a thing

You'll not make that mistake again and neither will I. You can't see anything when Windows boots but you know it's there. Maybe there's a way round this but I never found it and ended up reinstalling Windows.
 

http://www.techspot.com/community/topics/i-disabled-my-nvidia-geforce-gt610-graphics-card-accidentally-and-now-i-cant-see-a-thing.203943/
Relevancy 21.07%

Nvidia has announced a new game bundle for their high-end GeForce graphics cards, giving gamers a free copy of Metal Gear Solid V: The Phantom Pain with qualifying purchases at participating retailers.

Read more
 

A:Nvidia bundles Metal Gear Solid V with new graphics cards

Just perfect....am now shopping for a card and the gtx 960 seems the more likely choice for me.
 

http://www.techspot.com/community/topics/nvidia-bundles-metal-gear-solid-v-with-new-graphics-cards.216927/
Relevancy 15.05%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
 

http://www.techspot.com/community/topics/problems-with-wireless-network-adapter.188964/
Relevancy 30.1%

Hi guys Recently I ve been having trouble connecting to my mobile phones WiFi hotspot with my laptop I can connect to the hotspot with any other device such as the tablet I m using now and I can also connect to any other WiFi using my laptop The problem appears to exist purely between my laptop and my phone When issues hotspot Mobile attempting to connect it will begin authenticating and then disconnect offering me the troubleshooter Sometimes there is a small volume of packet transfer but not often I have tried disabling and reenabling all of my network adaptors to no avail and I m somewhat at a loss of what to do Mobile hotspot issues next The phone in question is a Motorola razr I if that helps but I have to point out that it worked flawlessly Mobile hotspot issues until recently I suspect the culprit may Mobile hotspot issues be hamachi as it had very recently been installed onto my computer at the time and it appears to be a known trouble maker But I still don t understand why no other problems have arisen Hamachi has been uninstalled but the problem persists Any suggestions or ideas that could help would be greatly appreciated Thanks for your time guys Mencil nbsp

A:Mobile hotspot issues

What OS is on the Laptop and which Firewall are you using?





The problem appears to exist purely between my laptop and my phone. When attempting to connect it will begin authenticating and then disconnect, offering me the troubleshooter.Click to expand...

huh? Connecting how: Bluetooth, Infra Red? The WiFi adaptors of both the phone and the laptop are never going to connect, unless you're attempting peer-to-peer which has limited utility.

If you're connecting via a router, then the PC is not the issue.
 

http://www.techspot.com/community/topics/mobile-hotspot-issues.194092/
Relevancy 21.93%

Which graphics card to choose between nvidia GTX960 and nvidia GTX760?
 

A:Buying Graphics Card

They are both rated as the same card within their generation. The 960 is the newest card.
 

http://www.techspot.com/community/topics/buying-graphics-card.216700/
Relevancy 51.6%

I just solved my own problem and thought others might benefit since I could not find the solution using internet search My Realtek HD Audio manager seemed to be creating an echo on my quot Line In quot HD Audio Realtek "line from effect) (if in" echo it Removing output sound not a is audio signal I had already set the environment and equalizer sound effects options to lt None gt but the echo persisted I found the problem seems that I was essentially duplicating the Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) Line In audio stream The first quot source quot I found was the HD Audio manager You can open the manager and view the Line In tab - mine had a non-zero playback volume the slider was NOT all the way to Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) the left for zero playback If you want Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect) output from the HD Manager that makes sense I also found out a second Line In quot source quot It was in the Line In properties settings where I had checked off the option to quot Listen to this device quot When I disabled that the echo disappeared To view this Line In properties tab right-click on the speaker icon in the notification area then select Recording Devices yes quot Recording quot Then the tab will display in a window with the title Sound You should see the Line In device in the list Right-click on this item and select Properties The Line In properties window pops up Then select the Listen tab UNselect Listen to this device The echo should disappear if you re experiencing my problem I hope this helps someone I m just trying to help the community from which I ve received so much help grinthumb nbsp

A:Removing "line in" echo from Realtek HD Audio output (if it is not a sound effect)

Two same signals

You're doing the right thing... getting rid of the other input signal.
 

http://www.techspot.com/community/topics/removing-line-in-echo-from-realtek-hd-audio-output-if-it-is-not-a-sound-effect.178881/
Relevancy 14.19%

AMD has released an updated statement regarding the noise issues experienced by the initial buyers of its Radeon R9 Fury X graphics cards.

Read more
 

A:AMD issues updated statement regarding Radeon R9 Fury X noise problems

Are they saying "screams like a banshee until we smothered it in glue"? Does anyone have a more engineered approach to the issue - like decibels at a specific distance?
 

http://www.techspot.com/community/topics/amd-issues-updated-statement-regarding-radeon-r9-fury-x-noise-problems.216306/
Relevancy 44.29%

I have a choice to make on a new monitor.

It needs to be VESA mountable and will be for strategy gaming and work purposes. Games like Wargame, Supreme Commander and World of Tanks. I work as a sysadmin so think lots of windows open!

Do I get a 24" monitor like this Benq (recommendations on a different one are welcome)

Or do I get a 27" monitor. If you think 27" what res would you recommend baring in mind I am sporting a 760gtx.

Thanks,
 

A:24" monitor or 27"

I think 1080P is the best bet for your GTX 760. 2560x1600 or 2560x1440 (27 inch panels) might be a bit too much. It is really personal preference whether you weant a 24 inch or a 27 inch. There are 1080P monitors in both sizes. I recommend Dell, BenQ, ASUS, Samsung, and ACER monitors. There are some other good ones, but I cant think of them off the top of my head.
 

http://www.techspot.com/community/topics/24-monitor-or-27.201808/
Relevancy 15.05%

It's been a while since I've posted but I've obtained most of the Sims 2 and I TRIED to install Double Deluxe but for some reason my dvd drive isn't recognizing the disc. It spins up and tries to read it, but doesn't do much in the line of effort to read it.
There are no scratches and I took care of the smudges with a cloth. Still unable to read the install disc. It'll read the promo/bonus disc and play it just fine though.
The computer is a Windows 7 with an HL-DT-ST DVD+-RW GT60N Drive.
I have enough RAM, Graphics and other things to run it.
300 Gigs of Space left on the HDD. No idea what's going on here.
 

A:Sims 2 Double Deluxe problems

You might have a bad optical drive. Does it work with other DVDs (DVDs not CDs)? Do you have access to another DVD drive with which to substitute for testing purposes?
 

http://www.techspot.com/community/topics/sims-2-double-deluxe-problems.216270/
Relevancy 21.93%

Hey guys... I just got a new EVGA GTX650 ti boost superclocked. I just put it in and I was not getting any signal to my monitor. I tried VGA, HDMI and DVI. Nothing worked and when I took it out to try booting with my integrated graphics, I didn't get any signal to my monitor. All of my connections and wires are connected properly, my power supply is the right voltage and has enough power to support my graphics card. My hard drives are spinning but I cant access my BIOS. I have tried everything that is common. I know my graphics card is not defective and im thinking that it might be my motherboard. Any suggestions?
 

A:My integrated graphics won't work

You were using integrated graphics before the discrete card? It's strange that your onboard isn't working if it was before hand. Usually it's just a overlooked cable or something plugged in the wrong place. Did you make any changes to BIOS? Some boards require you to change the primary display adapter to PCIE or onboard. Maybe a BIOS reset will help the situation. I doubt there is any issues with the MOBO itself. I suggest stripping the build down to nothing but the bear essential components for operation. This way you can isolate the issue a lot easier.
 

http://www.techspot.com/community/topics/my-integrated-graphics-wont-work.194322/
Relevancy 21.5%

Hello I have a (Low Budget) Card Recommendations Graphics decent PC with a crappy graphics card which is the (Low Budget) Graphics Card Recommendations only thing holding my gaming back I have gigs of RAM and an Intel Core duo E of Ghz Its a Dell Optiplex MiniTower and it has a Power Supply of w or so I need a Graphics card within - Without having to upgrade the entire thing Yep I know I m cheap but I m pretty desperate since my PC can t run even most games such (Low Budget) Graphics Card Recommendations as League of Legends and DOTA Dota ftw But for some weird reason I (Low Budget) Graphics Card Recommendations can run Elder Scrolls Oblivion perfectly yet games like quot Skullgirlz quot won t despite being a linear game And after researchin my sh t I came across these Graphics cards NVIDIA GeForce GT NVIDIA GeForce GT GeForce NVIDIA GeForce GT NVIDIA GeForce GT AMD Radeon HD Tell me the quot best choice quot out of these since my budget is pretty much limited and if the cards that I chose quot will even quot work or fit inside the case Also does it being Single-Width or Dual-Width matter And if it does which of the graphics cards that I listed will actually work I am just looking for a graphics card that will improve my PC not one that will turn it into a gaming computer Answer with minimum detail please Just kidding write as much as you want Cheers nbsp

A:(Low Budget) Graphics Card Recommendations

I'd recommend going to Ebay and looking for something like a Radeon HD 7850. I saw some sell for around 50ish bucks. The HD 7850 would be a huge improvement over the cards you listed.
 

http://www.techspot.com/community/topics/low-budget-graphics-card-recommendations.216068/
Relevancy 15.05%

I have a linksys router that has stock firmware and I can get into the config by 192.168 etc but I can't get it to see the internet. I have a isp that gives dhcp ip so no login needed. Any ideas?
 

http://www.techspot.com/community/topics/problems-with-wrt-54g-linksys-router.215894/
Relevancy 15.05%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
 

http://www.techspot.com/community/topics/building-computer-boot-up-problems.215853/
Relevancy 28.81%

Intel has launched a selection of new 5th-generation Core processors based on the company's Broadwell microarchitecture. Five of these new CPUs are designed for performance mobile and IoT devices, while two are socketed desktop CPUs for Intel's LGA 1150 platform,...

Read more
 

A:Intel launches new Broadwell CPUs for performance mobile, socketed desktop

The full list of socketed desktop and performance mobile Broadwell CPUs can be found below.Click to expand...

the two pictures link to only R series (socketed/1364, BGA/soldered to motherboard) and mobile/IOT processors. C series (unlocked, socketed/1150) are not shown in the two pictures but are listed in the article.
 

http://www.techspot.com/community/topics/intel-launches-new-broadwell-cpus-for-performance-mobile-socketed-desktop.213613/
Relevancy 21.07%

I was updating my graphics card drivers for my graphic card PNY GEFORCE GTX 660 and went to device manager, I used ?automatically search for new driver? and a dialog box appeared "Windows has determined that the driver is up to date".
Yet, I went to Nvidia website and did a driver update. I checked again Device manager for my display adapter and the new driver was TWO MONTHS NEWER.
I wonder why that happens.
 

http://www.techspot.com/community/topics/why-is-device-manager-lying-to-me-about-the-last-driver-version-for-my-graphics-card.215610/
Relevancy 21.5%

During the PC Gaming Show, which ran for a mammoth two and a half hours at E3 2015 last night, AMD CEO Lisa Su briefly appeared on stage to show off another Radeon graphics card that the company only briefly...

Read more
 

A:This is AMD's dual-GPU Fiji graphics card

These days for a blue-chip company to bring a PCB on stage like this is a dark day indeed.

Imagine Apple showing off a circuitry for their next iPhone, and just how pathetic that would be...
 

http://www.techspot.com/community/topics/this-is-amds-dual-gpu-fiji-graphics-card.215093/
Relevancy 21.07%

A barrage of leaks over the past few months left little to the imagination once it came time for AMD to officially unveil its Radeon 300 series graphics cards. Regardless, AMD filled us in on all of the pertinent details...

Read more
 

A:AMD officially announces Radeon 300 series graphics cards at E3

Hmm so the rebranded cards didn't get an GCN update to 1.2 which blows

The increase in clock speeds and Vram isn't enough alone.
 

http://www.techspot.com/community/topics/amd-officially-announces-radeon-300-series-graphics-cards-at-e3.214879/
Relevancy 20.64%

Integrated graphics solutions won't get you far when it comes to gaming, but they've evolved to the point that you can actually get decent frame rates in relatively modern games with the right graphics settings. Looking to remove some of...

Read more
 

A:Intel launches website to help gamers on integrated graphics get a boost in gaming performance

So they're teaching you how to move all the sliders to the left? ^___^
 

http://www.techspot.com/community/topics/intel-launches-website-to-help-gamers-on-integrated-graphics-get-a-boost-in-gaming-performance.214204/
Relevancy 21.07%

AMD's upcoming Radeon 300 series graphics cards may end up being rebadged 200 series cards with minor tweaks but it's not all bad news for gamers. WCCFtech has it on good authority (they're confident enough to drop the "rumor" tag...

Read more
 

A:AMD Radeon 300 series graphics card pricing leaks online

Rebrands or no, that extra memory will put some pressure on NVIDIA's lower end cards.
 

http://www.techspot.com/community/topics/amd-radeon-300-series-graphics-card-pricing-leaks-online.213820/
Relevancy 14.62%

Basically I think it s Laptop Samsung Ultrabook Series 5 Problems; been happening for a month now My laptop screen glitches - the images distorting and sometimes green text appearing - Laptop Problems; Samsung Ultrabook Series 5 before Laptop Problems; Samsung Ultrabook Series 5 righting itself and crashing The only way I can get the Laptop Problems; Samsung Ultrabook Series 5 laptop to function again is to turn it off via the power button or take the battery out and put it back it again It has also become slow starting up - taking at least five minutes before you can log in and then a further five before you can actually do anything The cursor sometimes gets stuck in the center of the screen - I can access things using the tab screen but the cursor won t move whether I use the laptop touchpad or my USB mouse The fan has also been sporadically speeding up before calming down again - even though I ve been doing the same thing for the past god knows when I ve done a boot-up scan using avast had a look through all of my files and gotten rid of any old files that I don t need on there in an attempt to create some space but I ve got about - gb free so I can t see why that should be a problem Nothing happens before the glitches crashes so I don t think I m causing it by moving it and so on About a month ago the charger port was fixed at a laptop repair shop and then the laptop itself was sent off to SAMSUNG to have the motherboard replaced because I mistakenly wiped the bios since one driver update shut the laptop off in the middle of the bios update so I don t know if something is loose and so on I m planning on selling it in a month or two so it s not that much of a problem but of course I don t want to sell it to someone if its being a pain in the backside I also switched from integrated graphics to a nvidia geforce graphics card that is in the laptop when I bought it so that might be why Basic Info Samsung Ultrabook Series Intel Core i GB Ram TB Hardrive bit Operating System NVIDIA Geforce GT M nbsp

A:Laptop Problems; Samsung Ultrabook Series 5

This sort of problem is tough to troubleshoot over the internet. It could be quite a few things that could cause the symptoms that you're experiencing. With that said, I'd probably start with updating the discrete GPU drivers. Since you did switch from integrated to discrete, this could be the main cause for the graphic glitches which is probably crashing the system.

Moving forward, I think you should download something like CPU-Z to monitor the CPU load and temperatures during the crashes. It could be that your CPU is overheating and could use some attention.
 

http://www.techspot.com/community/topics/laptop-problems-samsung-ultrabook-series-5.213703/
Relevancy 50.74%

Hey there all.

This problem just happened recently. Every time I put a blank CD in my CD drive, a message appears saying "E:\ is not accessible. Incorrect Function. I can watch DVDs but it won't recognize any blank CDs I put.

Any ideas?

Thanks in Advance.
 

A:Drive is not accessible - "incorrect function"

First try this from the Windows Explorer after you have inserted a disc.

Right-Click on E: drive

Select Properties from the pop up menu

Select the Recording Tab

then check the "Enable CD Recording On This Drive" box.
.
 

http://www.techspot.com/community/topics/drive-is-not-accessible-incorrect-function.166087/
Relevancy 21.93%

Hey all My new computer is a new graphics with Problem cards quot Medion Akoya P -E quot With art number windows It has an NVIDIA GeForce GT graphic card Problem with new graphics cards Original Psu w My old computer is a quot Emachine EL quot windows vista Original Psu w I have bought a Psu from w to have a pin connector for the GTX ti graphic card When installing this Psu in my EL both graphic cards works fine Now I have brand new graphic Problem with new graphics cards cards NVIDIA GEFORCE GT NVIDIA GEFORCE GTX TI Asus Both cards WORKS on my old Problem with new graphics cards computer Now the problem When installing the new Psu w into my medion computer everything works fine When I remove the graphic card from my new computer and put the or the in it the computer wont start getting long beep and x short beep this means problem with graphics card Now I have retested my graphic cards in my old computer and they both works fine so there is a problem probably something within my computer settings I have searched and searched but couldn t find any solution so thats why I m posting it here I am from Belgium so forgive me for my bad grammar Any suggestion will be tried and I am sure all cables are connected probably when I need to install my GT I don t even need to unplug any cables so thats not the problem nbsp

A:Problem with new graphics cards

Wait. So when you put the 630 and 650 in your Medion, it fails?
 

http://www.techspot.com/community/topics/problem-with-new-graphics-cards.192355/
Relevancy 15.05%

I have a keyboard that has been working fine last night then this morning this happened:

When I type o it types o+ and when I type l it types l and enter (the key)
So this makes it extremely hard to get anything done, please help, thanks
 

A:Keyboard problems

How old is the keyboard? Sometimes "gunk" gets built up under the keys and can cause the keyboard to start failing. Have you tries to remove the keys (or take the keyboard apart) and properly clean it? There are plenty of tutorials (video and non-video) available if you are unsure of how to clean a keyboard.
Regular cleaning on all computer parts will extend the life of those parts.
 

http://www.techspot.com/community/topics/keyboard-problems.213578/
Relevancy 21.93%

I recently bought a new graphics card due to my old one giving out. The new graphics card I got was the GTX 960. I think I plugged everything up right. I uploaded some pictures I thought were viable into helping me find the solution to my problem. I'm really feeling like ****. I was so excited to receive my new 200$ graphics card and to find out it wont even turn on has really got me bummed out. Can someone please help me?

http://imgur.com/JfGMLp6
(8pin connector is plugged in)
http://imgur.com/Z2fImrz
(6-pin connector is plugged in)
I dont have the last image for some reason it wouldn't upload but anyway it's connected to the PCI-E slot.
 

A:Graphics card not turning on

Any luck with this?
 

http://www.techspot.com/community/topics/graphics-card-not-turning-on.213330/
Relevancy 28.38%

Controversy surrounding the GTX 970 aside, the 900 series GPUs from Nvidia is among the most anticipated graphics chips in recent memory. The mobile variants are especially impressive as they narrow the performance gap between their desktop counterparts to 80...

Read more
 

A:Nvidia removes overclocking from 900M mobile GPUs, a feature advertised on some notebooks

LOL it is clearly a move by Nvidia to force people to upgrade more often. They will probably take the 980m and do the same thing they did with the 680MX -> keep re-releasing it with 10% higher clocks every year.

Problem is that someone with a 680mx could just overclock it 30% and get an 880m. However this should be a problem for Nvidia, not us. If they want us to upgrade, give us something worth upgrading to!
 

http://www.techspot.com/community/topics/nvidia-removes-overclocking-from-900m-mobile-gpus-a-feature-advertised-on-some-notebooks.208906/
Relevancy 21.93%

Hi im planning to get myself a graphics card. to play games like arma 3 on max graphic or any othergame.
can I install any good graphics card to my pc?
Processor: -ADM A10-5700 APU with Radeon(tm) HD graphics.
-(4 cpu) 3.40 GHz
-8 GB Ram
-64 bit windows 8.1

DISPLAY-- -dac type: internal dac(400MHz)
AMD Radeon HD 8470
Monitor. generic PnP Monitor
 

A:Can my PC handle any Graphics card?

We will need more info then that. If your computer is a Dell, HP or something like that please give us the Model number. if you don't know please try to open your computer and take a picture of the inside of the case. Also make sure get a close up on the PSU ( box inside of your computer with a lot the cables coming out of it) it should be in the top back or bottom back of the computer.
 

http://www.techspot.com/community/topics/can-my-pc-handle-any-graphics-card.213125/
Relevancy 21.93%

Just as the title says "What's the best Graphics card for a 460W PSU?" My goal would be to upgrade my GPU without upgrading PSU. My budget is $200. Thanks in advance.
My specs:
Pc Model : Dell XPS 8300-4005NBK
CPU: Intel Core i5-2320 Quad-Core Processor 3.0 GHz
GPU: 1GB AMD Radeon HD 6450 Graphics
RAM: 6GB
Hard Drive: 1TB SATA Hard Drive
PSU: Dell XPS 8300 Mini-Tower 460 Watt Power Supply PSU (7P3WV H460AD-00)
 

A:What's the best Graphics card for a 460W PSU?

I would say anything with a single 6-pin power connector, such as a GTX 960 or R9 270.
 

http://www.techspot.com/community/topics/whats-the-best-graphics-card-for-a-460w-psu.212634/
Relevancy 21.93%

AMD is expected to release a bevy of next generation graphics cards in the first half of 2015 starting with the Radeon R7 360 and 360X next month according to recently published information from The Tech Report (translated from 3DCenter).

Read more
 

A:AMD's next-generation graphics cards: here's what we know so far

So much power, but so little optimization.
 

http://www.techspot.com/community/topics/amds-next-generation-graphics-cards-heres-what-we-know-so-far.208688/
Relevancy 21.93%

Wow so I just received my new in the mail today and guess what it doesn t work Well here s what I did so far I uninstalled all nvidia graphics drivers which I used for my gso Rebooted to complete installation Disabled onboard video drivers Shut off computer Installed into motherboard Booted up Now I don t get any video from the card outputs itself so I used my onboard video output to log into windows I tried installing the CCC but the installation failed or something like that I check the device manager and there detected card not Graphics isn t any sign of the showing up Now I m a little scared and not sure what to do The appears to be powered cause my computer is x louder with that damn fan Its just that it won t be recognized by device manager and the drivers won t work Thanks guys Edit When I installed the I had to move the hard drive and cd sata cables from the first and second port to the third and forth ports Whenever I boot my POST says your system last boot fail or POST interrupted Please enter setup to load default and reboot again I press f to bypass this Also when I go into system for some reason it only detects GB of RAM I have bit windows lt -- it only started happening since the new graphics card was installed Reinstalled Windows same damn problem Also I m starting to think that the graphics card is defective as even the bios cannot recognize the card on boot And I believe that is the reason for the Graphics card not detected POST failing nbsp

A:Graphics card not detected

Also, when I go into system, for some reason it only detects 3.87 GB of RAM... I have 64 bit windows 7 <-- it only started happening since the new graphics card was installed.Click to expand...

That's probably because your onboard video is allocating some of it.
 

http://www.techspot.com/community/topics/graphics-card-not-detected.167268/
Relevancy 15.05%

For about the past month or so, my W7 tower on DSL occasionally loses its connection to the internet so I right click the the icon in the notification area & click trouble shoot & it reconnects yet my iPhone & Ipad remain online no problem.
Why?
 

A:Intermittent DSL connection problems

Clearly the router is doing find and the activity on W7 IS THE ISSUE.
Examine carefully what was active when the connection was lost.
 

http://www.techspot.com/community/topics/intermittent-dsl-connection-problems.207951/
Relevancy 35.69%

I m coming into some money lovely are them tax returns so I m considering getting something big expensive I ve already got a good rig sporting a K CPU and a GTX GPU so I was thinking maybe this would be the time to invest into a new monitor I m currently using a technology Is 4K enough? mature standard p LED Hz so it s perhaps time for an upgrade It s not that I care that much about K but I want Nvidia G-Sync and I might as well check as many boxes as possible while I m at it I went to my usual webshop to see what they had in stock in terms of K monitors and-to my surprise-they really didn t have that many I think maybe there was only one or two K monitors with G-Sync Also I remember there was a lot of interfacing issues with the early models such as having to use two HDMI cables and the K monitors really being two p monitors side by side or some such Seeing how few K monitors are out there and looking at the prices I m starting to w wonder Is this technology mature enough or should I wait and invest into something else EDIT Strike that I can t find a single K Is 4K technology mature enough? monitor with G-sync in that webshop anymore They re no longer available for some reason Acer quot K LED Predator G-Sync XB HK was the one I was looking at earlier nbsp

A:Is 4K technology mature enough?

Have you considered a surround setup? Surround looks interesting and might keep you content, until 4K availability is more mainstream.
 

http://www.techspot.com/community/topics/is-4k-technology-mature-enough.212413/
Relevancy 51.17%

I have scoured the from computer, sounds" can speakers "computing my hear my through I internet for a solution to this and have found nothing First my dxdiag is attached I have had this issue for over a year now and I am getting fed up If I put my ear to my pc I can hear computer noises coming from it I can not compare it to another sound as there is nothing else to compare it too it just sounds like my CPU or Hard Drive thinking That doesnt bother me though I expect my computer to make some noise HOWEVER I dont expect to hear it in my speakers too I have a lot of speakers and a lot of headphones no they are not I can hear "computing sounds" from my computer, through my speakers the problem Right now I am using a knappenberger tube hooked up to a GK MB just cuz I can When I plug in any speakers I can hear the CPU sound through them regardless of the volume level I can turn the speaker all the way down and yet the sound will come through This leads me to believe I can hear "computing sounds" from my computer, through my speakers it is a grounding issue or electrical to some degree I would like to try physically grounding my case to see if it would eliminate this God awful feedback However I can not find a guide as to I can hear "computing sounds" from my computer, through my speakers the best way to do this or any other suggestions So here I am Help me and earn my eternal gratitude Some notes If I unplug all of my cables except power and the speaker cable I still hear it if I plug in my speaker cable to my monitor instead of my PC I still hear it Front port still hear it I have yet to try a different sound card as I dont have one Once I find one I will update nbsp

A:I can hear "computing sounds" from my computer, through my speakers

Checked some settings in the Bios, noticed the sound isnt there while navigating it. Static started once windows loaded. Maybe it is some sort of issue with the hard drive
 

http://www.techspot.com/community/topics/i-can-hear-computing-sounds-from-my-computer-through-my-speakers.202182/
Relevancy 49.88%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 21.07%

Hi I have my new PC for a months everything worked perfect till one morning I turned it on and the monitor SAMSUNG tried to detect the graphic card ASUS R without any success and turned to sleep mode The monitor works without problems with another PC or Laptop I connected the VGA card to my tv LG and it works without problems after when I connected it back to my monitor it works but not stable in the screen resolution properties it doesn t recognize turn to and sleep detect Monitor mode Card Graphics can't the monitor it s going in safe mode for any entering to game installing some program or restarting of the computer I tried to put my Graphics Card can't detect Monitor and turn to sleep mode GTX into that slot there are slots for graphic cards and I tried both of them instead of R and everything works without problems So I decided to connect my GTX that works perfect to x slot and the R to Graphics Card can't detect Monitor and turn to sleep mode x slot connecting the monitor to GTX it detect also the R without any problems but when I disconnect the monitor from the GTX and connect to R the monitor going to safe mode again I tried all these connections with many different cables all the cables are in working condition If somebody can help me I will be grateful Thanks nbsp

http://www.techspot.com/community/topics/graphics-card-cant-detect-monitor-and-turn-to-sleep-mode.212064/
Relevancy 33.97%

Good news on the consumer solid state drive front as storage capacity is expected to ramp up dramatically in the coming months thanks to a partnership between Intel and Micron.

Read more
 

A:New flash technology from Intel, Micron will soon spawn 10TB SSDs

Will believe it when I see it but it sounds freaking awesome!
 

http://www.techspot.com/community/topics/new-flash-technology-from-intel-micron-will-soon-spawn-10tb-ssds.210781/
Relevancy 49.88%

I'm trying to record some karaoke but every time I play back the recorded track, the music is "doubled" with a slight delay, as if the laptop's built-in microphone was picking up the music along with my voice. Here is an example:

http://www.singsnap.com/karaoke/watchandlisten/play/c58ef46c3

Notice how those staccato notes are doubled with that slight delay.

I'm using Windows 7 on a Dell laptop with Realtek.
Under Playback I have two devices: Loudspeaker (enabled) and Realtek Digital Output (disabled)
Under Recording I have: Microphone (enabled) and Stereomix (disabled)

I'm recording using headphones and the laptop's built-in microphone. This is what the Realtek Audio Manager looks like:

It's in German but most options are self-explanatory.

If you could help I'd be very grateful.

Thanks for reading.
 

http://www.techspot.com/community/topics/bleeding-when-trying-to-record-on-laptop.211024/
Relevancy 51.17%

I have been having this issue for about 2 weeks now. Ive literally tried everything including uninstalling/reinstalling network card, restore points (there are none), a windows update download, and reformatting the hard drive (wont let me). Any help is appreciated. I cant afford a new pc or any new hardware at this time.
 

A:"Failed to query TCP/IP settings of the connection. Cannot proceed."

failed to query tcp/ip settings of the connectionClick to expand...

what did you do when this occurred?

Describe network equipment {modem, router} ISP, and your system.

Connect it all together, get a command prompt, enter ipconfig /all >myTcp.txt
and come back here and paste the contents of myTcp.txt as your reply
 

http://www.techspot.com/community/topics/failed-to-query-tcp-ip-settings-of-the-connection-cannot-proceed.177223/
Relevancy 50.74%

Hi my daughter tried to adjust the resolution and now the screen is Black and stuck on Out Of Range. I cannot even get it safe mode or anything. Just a black screen with the writting. It's a windows xp 32. My son is so sad if anyone knows what to do please help. Thank you.
 

A:PC monitor screen is black & says "Out Of Range"

Repeatedly press F8 while the system is booting.. The very first stuff you see on screen will either be your motherboard splash screen or some text. When you get to the menu where you can make a selection, choose VGA mode NOT Safe Mode. That will boot your computer at 640x480, but it will boot with full driver support, just as if things were normal. Change the resolution to what you want after that.

Remember if you change it to something that goes 'out of range' DO NOT touch anything for 15 seconds. It will revert back to what it was after that time and you can try again.

Unrelated.. Go to school at UMR? or different Miner?
 

http://www.techspot.com/community/topics/pc-monitor-screen-is-black-says-out-of-range.210867/
Relevancy 21.93%

The computer I have runs games like csgo and gary's mod terribly and after some poking around a few people told me that it was because I have a bad graphics card, I simply want to know what kind of graphics cards my computer can use. I dont want to buy a whole new comp, just replace its graphics card. Its a dell Inspiron 560 Pentium(R) Dual-Core CPU E5700 3.00GHz. 4.00 GB of Installed RAM, 64-bit operating system. If you need to know more about my computer please ask
 

A:Need new graphics card

Is this your PC? http://downloads.dell.com/Manuals/Common/inspiron-560_user's guide_en-us.pdf

That manual says your PC has a PCI 16 slot so I would suggest a Nvidia 750 as it has good performance and low power needs so you probably do not need a new power supply to use it.
 

http://www.techspot.com/community/topics/need-new-graphics-card.210652/
Relevancy 21.5%

Hello I apologize in advance for my almost complete lack of computer knowledge That said my PC was built for me by one of the IT guys at work who has since moved on I can t scare him card Good with Windows 7? graphics compatible up from his last known email addy So I m sort of out there drifting on this stuff trying to find any help I can The PC is connected to the home theater system TV through HDMI About weeks ago and video from the internet stopped producing sound In addition the PC doesn t Good graphics card compatible with Windows 7? play audio dvds anymore And when I click on the samples in the library I can t play them either I m assuming without knowing the graphics card is shot I think it s about four years old I opened up the box pulled out the graphics card I didn t make a note of manufacturer model but my device manager says it s nvidia and the driver is up to date and cleaned it I plugged it back in still no sound I can play youtube videos or stream online content but none of it has sound Does it sound to you guys like I need a new graphics card If so I need a recommendation for a better than average one that is compatible with windows professional something in the range or so Any help would be greatly appreciated Thanks nbsp

A:Good graphics card compatible with Windows 7?

Open up nVidia Control Panel.
Under Display select "Set up Digital Audio".
Verify settings to make sure they are correctly set up to send audio.
 

http://www.techspot.com/community/topics/good-graphics-card-compatible-with-windows-7.210597/
Relevancy 21.07%

When Nvidia launched the GeForce GTX 900 series of graphics cards last year, the company decided not to bundle a free game with each purchase of a flagship GPU. But with the impending launch of a GameWorks-enhanced, resource-intensive title, Nvidia have...

Read more
 

A:Nvidia bundles The Witcher 3: Wild Hunt with new graphics cards

Think as a recent gtx970 purchaser I should be able to get the voucher to. stupid 3.5gb of lamemory
 

http://www.techspot.com/community/topics/nvidia-bundles-the-witcher-3-wild-hunt-with-new-graphics-cards.209573/
Relevancy 15.05%

I have a Dell Optiplex 330 which has a 2.0 dual processor with 4gb of ddr2 ram. I have windows xp installed and I have a video card that has 1024 mb of ram. I am unsure of the brand of video card or further specs. I bought it off of ebay some time ago.

My problem is that when I try to play streaming video it wants to freeze a lot. I have already given more space for the virtual memory on my computer: I think 4 to 8 gb and I have set my hardware acceleration way down but these changes haven't helped.

I can download and play movies fine, I only seem to have problems when playing streaming video like from hulu.com or letmewatchthis.com which directs you to sites like: putlocker, deditv, sockshare, loomba, etc. I have used other computers and they don't seem to have as much problems with this so I hope that somebody knows what I need to do to solve this problem. Thanks in advance for any help.
 

A:Freezing problems with streaming video

When you say freezing, do you mean just the video freezes, or the whole system? If its just the video, it could have something to do with your internet connection. Is the computer on wired internet or wireless?
 

http://www.techspot.com/community/topics/freezing-problems-with-streaming-video.164671/
Relevancy 20.21%

In a strange turn of events, Nvidia elected to use Epic Games' media event (instead of its own last night) at the Game Developers Conference to reveal its newest flagship graphics card, the Titan X.

Read more
 

A:Nvidia crashes Epic Games' media event, announces Titan X graphics card

Soo... What are the chances of a 6GB "980Ti" variant? A bit like the 780Ti was to the Titan Black?
Because it would be better for games and a hell of a lot cheaper

If the rumor mill is to be believed, the price is going to be $1,349, Most people who buy this for gaming will have no use of the double precision floating point prowess of the card, and the few that would probably should have spent a couple hundred extra bucks to get a proper Quadro!
 

http://www.techspot.com/community/topics/nvidia-crashes-epic-games-media-event-announces-titan-x-graphics-card.209423/
Relevancy 21.5%

I am looking to get a new graphics card for my computer because atm it has integrated graphics, which as most of you know sucks. The power supply is 250W which I doubt would be enough to have a whole new graphics card implemented. The model is p6166f. The mother board has this for a graphics card slot PCI express 16x GPU. Please give me suggestions, I am looking to spend approximately 150 - 200 $ total.
 

A:Looking for new Graphics card and Power supply

We need to know who made your system. How old is your system?
 

http://www.techspot.com/community/topics/looking-for-new-graphics-card-and-power-supply.209241/
Relevancy 50.74%

For the past month, Nvidia has faced its fair share of bad PR thanks to the GeForce GTX 970's memory allocation issue. As has been uncovered by users and explained by Nvidia, the GTX 970's last 512 MB of VRAM...

Read more
 

A:Nvidia CEO says GTX 970 memory controversy "won't happen again"

Again: the performance didn't change overnight; it's today the same performance than the advertised on launch date. Even that technicality can kill the case. Specifications were the "misleading" part.
 

http://www.techspot.com/community/topics/nvidia-ceo-says-gtx-970-memory-controversy-wont-happen-again.209149/
Relevancy 33.54%

Nvidia's G-Sync technology is currently available on a handful of displays but the cost of entry isn't cheap. That's because the current crop of monitors require custom hardware to work their gaming magic - a requirement that soon won't be...

Read more
 

A:Nvidia G-Sync technology is coming to laptops, no custom hardware required

LOL the G-Sync module was only ever used to verify 100% that someone was using a Nvidia GPU. What a bunch of crooks...
 

http://www.techspot.com/community/topics/nvidia-g-sync-technology-is-coming-to-laptops-no-custom-hardware-required.208532/
Relevancy 28.38%

Samsung has started mass producing what's being called the industry's first ePoP, or embedded package on package. By combining two key smartphone elements into a single package, Samsung's solution promises to offer high-end handset makers up to 40 percent more space. ...

Read more
 

A:Samsung's new mobile memory chip combines 3GB of RAM, 32GB of flash into a single package

It's the natural progression of tech right now.
 

http://www.techspot.com/community/topics/samsungs-new-mobile-memory-chip-combines-3gb-of-ram-32gb-of-flash-into-a-single-package.208588/
Relevancy 21.07%

I don t know if this is the right place to put this so I appologize So my current computer specs are - Intel core i - k - Gigabyte Geforce GTX TI BOOST - Corsair Vengeance GB of RAM - Asus card for Upgrading games evolve future graphics the and P Z -V LX mother board - Corsair Gold AX PLUS Upgrading graphics card for evolve and the future games Power Supply So for the past days I ve been looking around at different graphic cards and I narrowed it down to these three EVGA GeForce GTX SC ACX GB G-P - -KR - - Must wait month Gigabyte GeForce GTX Ti GB Windforce - Can get it right now EVGA GeForce GTX Ti GB G-P - -KR - Can get it right now Now obvious reasons the is most likely the best of the three but also the most expensive one I would like to know if it s worth waiting month and get the if not bottle necked by other components or get one of the s instead Current games I play are Dying light and the reason I need a new card is for future games such as Evolve Batman Arkham knight etc I want to be able to stay frames Other suggestion are very much appreciated Also if you could explain why I should get that card would be awesome nbsp

A:Upgrading graphics card for evolve and the future games

If you don't get the 980, you will only be kicking yourself later. That is if you are seriously considering it.

http://www.techspot.com/review/885-nvidia-geforce-gtx-970-gtx-980/page5.html
 

http://www.techspot.com/community/topics/upgrading-graphics-card-for-evolve-and-the-future-games.208598/
Relevancy 51.6%

As you've probably heard by now, Nvidia is having a few issues with their GeForce GTX 970 graphics card. In response, AMD has lowered the price of the card's main competitor, the Radeon R9 290X, in an attempt to get...

Read more
 

A:AMD cuts Radeon R9 290X price amid GTX 970 "issues"

Meaning AMD could have been selling the card cheaper this whole time.

AMD needs to stand more firmly in their business decisions. Changing prices on a whim every time the wind blows, shows lack of confidence in their product to sell itself.
 

http://www.techspot.com/community/topics/amd-cuts-radeon-r9-290x-price-amid-gtx-970-issues.208450/
Relevancy 15.05%

Hello all...I'm having problems with my Dell PC. I just purchased a sweet new scanner (ScanSnap SV600) and when I scan a lot of pages at once, I get an error message saying I'm out of storage and to restart the computer. The specific code given is 0x8007000E. I've also been noticing when I run a few web tabs at once, sometimes they just go black and I need to restart the browser. It has 8GB of RAM and all the drivers are updated. Anything I'm missing? Thank you kindly!

Dell Optiplex 790
[email protected]
8GB RAM
Win 7 Pro
 

A:Memory Problems?

How much storage space do you have? From what I could research this error is tied to programs demanding a great deal of memory. You say this occurs when trying to scan a lot of pages at once. Does this occur when scanning less material at once? Have you tried updating your drivers for the scanner?
 

http://www.techspot.com/community/topics/memory-problems.208487/
Relevancy 21.07%

How can I setup multiple monitor in Eyefinity?

My Card is Sapphire Dual-X R9 270x 2GB http://www.newegg.com/Product/Produ...DUAL-X_R9_270X_2GB-_-9SIA2RY1DG6402-_-Product I Have 2
Connections are I have 2 Monitors connected on 1 Card then 1 Monitor for the other
All of it are in DVI
Problem is in Eyefinity I don't know how to setup for it to be only one whole desktop
 

A:Setting Up Multiple Monitor with 2 Graphics Card in Eyefinity

I would check this thread out: http://goo.gl/4z2Azv
 

http://www.techspot.com/community/topics/setting-up-multiple-monitor-with-2-graphics-card-in-eyefinity.202756/
Relevancy 21.93%

I currently have a GT610 and I would like to upgrade my graphics card. Could someone recommend a decent graphics card for me? I play games such as: Tomb Raider, Arma, Splinter Cell Blacklist, and Skyrim. I've been looking at a GTX 750, but if someone has a better idea for a graphics card based upon my computer and games with a price rage of about $200 or maybe a bit more or less, that would be great.
Link to my computer:

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=8939446&CatId=114
 

A:Suggest a graphics card

GTX 960 or an R9 280X (might be $20 over). Those are your best performing cards for that amount. I'd go with the 960 for energy and temperature benefits though the temps won't be too much better.
 

http://www.techspot.com/community/topics/suggest-a-graphics-card.208348/
Relevancy 21.93%

So I bought myself a new case the other day but when I was done putting in my graphics card, I booted my PC but I didnt get an signal and I have'nt done nothing wrong.

I have nVidia geforce gtx 550 Ti
 

A:Graphics card broken

Did you connect the 6 pin PCI-E connector from the PSU to the GPU card? Have you tried to remove the GPU and re-seat it?
 

http://www.techspot.com/community/topics/graphics-card-broken.208307/
Relevancy 21.93%

I purchased a new i3 pc with asrock h81m-s1 plus motherboard.
But it is not detecting my nvdia geforce 9500 gt graphic card... It shows no display.. And in devixe manager also card is not listed

Please help
 

A:Not detecting graphics card

Make sure the system BIOS is not set to boot strictly with integrated graphics.
 

http://www.techspot.com/community/topics/not-detecting-graphics-card.207840/
Relevancy 30.53%

When I connect my carbbon mobile sometime it connects to wifi sometimes not
 

http://www.techspot.com/community/topics/carbon-mobile.208143/
Relevancy 21.93%

So, I built a PC years ago and kept a few things from my old unit.
Sound and video card.
Sound card didn't work with the new system so I'm running it onboard. Sounds okay, but I'd like to update it!
Video card is beyond old. Just picked up SimCity for 10 bucks and it looks like crap. Has to play on low settings.

Here's what I have:
Core i7 950 running at 3.07
6MB Ram (thinking of going to 8 here)
64bit OS Windows 7 home premium

ATI Radeon 5450. (NOT HD) I've looked for the card online and can't even find a picture of it.

What should I be looking for in terms of a video card to last me for years to come?
Santa left me a nice check for Xmas so money isn't really an issue!

Here's a pic of the PC (graphics card is taken out from the missing PCIe slot)

 

A:PC needs some new parts (Graphics and sound)

Wow. Bestselling card on Amazon is $359.99
I wasn't thinking of spending more than $200...I don't game that much and just want a much-needed upgrade!
 

http://www.techspot.com/community/topics/pc-needs-some-new-parts-graphics-and-sound.207740/
Relevancy 21.93%

Hey guys my device is hp compaq 6200 pro microtower pc
serial no. : SGH125P585
n product no. : XL504AV

I have inbuilt intel hd graphics n no installed a external one n plannin to upgrade gpu
I have 320 watts of psu n plannin to upgrade to 550 watts

I have a pci x16(2.0) pci slot
but dont know whether it is low profile or full height ???

my pci bracket is 4.2" long so it must be a full height na!!!!!!
I wana know how much long graphics card my device can support!!!!

I wanna use a mid -range
msi nvidia gtx 750 2 gb oc ddr5

http://www.msi.com/product/vga/N750-2GD5OC.html#hero-specification

or
leadtek gtx 750 2 gb oc ddr5
http://www.leadtek.com/eng/product/1/697/intro.aspx
will
both d graphics card support my device?????
 

A:Graphics card issues

rockyrulz said:





I have 320 watts of psu n plannin to upgrade to 550 watts

I have a pci x16(2.0) pci slot
but dont know whether it is low profile or full height ???

my pci bracket is 4.2" long so it must be a full height na!!!!!!
I wana know how much long graphics card my device can support!!!!Click to expand...

I'd say yes you have a full height card. The half-height is only about 2 inches. If you upgrade your PSU to 550 like you said you would, I see no reasons why you couldn't run a 750. The 750's are not long cards and should fit in your case with ease.
 

http://www.techspot.com/community/topics/graphics-card-issues.207671/
Relevancy 21.07%

Not sure if this is better suited for here for the Alternate OS section, but here it goes

I have pretty much switched by computer to running just Linux. Almost never boot over to Windows. Only issue I'm having with it is the Radeon graphics drivers for my R9 290 seem to be arguing with Steam. I have read Nvidia cards propritery drivers work much better with linux.
So one of my work computers needs a graphics card upgrade and I'm thinking getting a good Nvidia card to replace my R9 290 and see if that fixes my graphics driver conflit issues.
Does anyone have any experiance with that and what would be a good card comperable to the R9 290 from Nvidia's end of things?

Thanks!
 

A:Nvidia graphics card running Steam on Linux

The Geforce GTX780Ti or the big boys would be the only way for u to go, that would be comparable. and I would have no idea on driver.
 

http://www.techspot.com/community/topics/nvidia-graphics-card-running-steam-on-linux.207200/
Relevancy 51.6%

I have a mystery on my hands. I received a Bluetooth speaker as a gift. The BT-4.0 adapter plugged into my computer (USB-2.0 port) detects it (as a "Bluetooth headset"), but when I try to select it as my output device (from the "Sound" Control Panel), Windows reports it as "Disconnected".

If I open "Devices and Printers" and right-click the "Bluetooth headset" icon, I get an alert that the device "Failed to initialize".

I've tried rebooting, tried a different BT adapter, updated my BT drivers off the makers' website, Device Manager shows everything is connected & working (including "Bluetooth Audio").

64bit Win7 Home. Inateck BT-4.0 usb adapter. Speaker is a "MicroBoom" BT v2.1:
Any ideas?

PS: Eliminated the obvious. Speaker is fully charged and works just fine with my phone.
 

http://www.techspot.com/community/topics/bluetooth-headphones-paired-but-disconnected-failed-to-initialize.207624/
Relevancy 21.93%

My graphics card previously got wet and frankly I don t know enough about computers in order to know what part to order for this How can I find the best graphics card for this system Or more simply can someone tell me what is the best card this system can support Information below Field Value Computer Operating System Windows Home Premium Home Edition OS Service Pack - DirectX DirectX c Computer Name STARFISH User Name Patrick Motherboard CPU Type DualCore system? for Best graphics card this Intel Pentium Best graphics card for this system? D MHz Motherboard Name Unknown Motherboard Chipset Unknown System Memory MB BIOS Type Unknown Communication Port Communications Port COM Multimedia Audio Adapter High Definition Audio Controller NoDB Storage IDE Controller Intel R G ICH Family Ultra ATA Storage Controllers - DF SCSI RAID Controller Intel R ICH R DH SATA RAID Controller Disk Drive ST AS Disk Drive WDC WD AAKX- ERMA Disk Drive Generic USB SD Reader USB Device Disk Drive Generic USB SM Reader USB Device Disk Drive Generic USB CF Reader USB Device Disk Drive Generic USB MS Reader USB Device Optical Drive TSSTcorp CDDVDW SH-S A ATA Device SMART Hard Disks Status Unknown Partitions C NTFS MB MB free Input Keyboard Standard PS Keyboard Mouse HID-compliant mouse Network Network Adapter Belkin Wireless Adapter Network Adapter Intel R PRO PL Network Connection Peripherals Printer Fax Printer Microsoft XPS Document Writer USB Controller Intel R G ICH Family USB Universal Host Controller - C NoDB USB Controller Intel R G ICH Family USB Universal Host Controller - C NoDB nbsp

A:Best graphics card for this system?

Look for a model number printed on your motherboard, usually printed around the CPU area.

The info you provided only tells us you are using a Pentium D. Most likely an 820 (could also be either 915 or 920) but not positive. In any case this would be an LGA775 platform, which usually has a PCIe x16 slot. But without knowing the model number of the motherboard so we can check, I'm not going to swear on PCIe x16 support. I am leaning toward PCIe x16 support, since you stated having a graphics card.
 

http://www.techspot.com/community/topics/best-graphics-card-for-this-system.207505/
Relevancy 21.93%

I have a D945GCR MoBo.... does it have a Graphics card port?
 

A:Does my mobo have a graphics port?

Nick OZ said:





I have a D945GCR MoBo.... does it have a Graphics card port?Click to expand...

Yes it has, the motherboard in question has a "PCI-x16" which means that all and any new graphics card (GPU) should fit. However, you may want to check what power supply (PSU) you have since new GPU might require more power.
 

http://www.techspot.com/community/topics/does-my-mobo-have-a-graphics-port.207195/
Relevancy 21.93%

I'm doing a simple build for my parents and when I boot it up the monitor doesn't respond. Everything is hooked up properly and I've tried a different monitor.
Processor - i3-3240 with hd 2500 integrated graphics
Motherboard - ASRock H61MV-ITX
 

A:Integrated graphics not working

Issue resolved. Sorry I dont know how to delete the thread
 

http://www.techspot.com/community/topics/integrated-graphics-not-working.207495/
Relevancy 14.62%

See picture below. Any ideas? Ive cleaned the rollers, and the main charger, and pretty much anything else I can find in the copier. Havent replaced the toner cartridge though. Originally there was toner all over the place and the dotted line was a solid black line. Performing the aforementioned maintenance items got rid of the thick black line but now this remains.

Any help is appreciated
 

http://www.techspot.com/community/topics/kyocera-km3530-copier-copy-problems.207362/
Relevancy 21.93%

Hi all. Im after some recommendations/thoughts on a Graphics card to suit my current set-up.
Im basically wanting to fit a card that's as higher spec as I can go before the rest of my PC(CPU,RAM,MBoard) becomes a hindrance on its performance.
Operating System
Windows 7 Home Premium 32-bit SP1
CPU
Intel Core 2 Duo E7500 @ 2.93GHz 39 °C
Wolfdale 45nm Technology
RAM
4.00GB Dual-Channel DDR3 @ 533MHz (7-7-7-20)
Motherboard
ASUSTeK Computer INC. P5G41T-M LX (LGA775) 43 °C
Graphics
VS248 ([email protected])
1024MB ATI AMD Radeon HD 5700 Series (XFX Pine Group) 49 °C
Storage
465GB SAMSUNG HD501LJ ATA Device (SATA) 42 °C
Optical Drives
SONY DVD RW DRU-840A ATA Device
HUAWEI Mass Storage USB Device
Audio
ASUS Xonar DGX Audio Device
 

A:Graphics card to suit

With Core 2 Duo, I'd say any current $150 card. Just make sure your PSU will be strong enough to power it (at least 400W). Anything less than 400W, and you should probably stick with $100 or less cards.
 

http://www.techspot.com/community/topics/graphics-card-to-suit.207045/
Relevancy 51.6%

Hello It may seem like a simple problem but I know nothing of the subject and I ve had the problem for ages Whenever I copy large files Movie size think MB the copy progresses very remaining" drives "5 sec Copying to/from stuck before for flash on 30 finishing seconds fast MB s until it reaches about where it gets stuck for about seconds to a minute and it says quot Time remaining seconds quot during all that time I have this problem with any flash drive in any USB port amp It also happens when copying to network drives and external harddrives which leads me to think it s a software windows issue Some vital information Copying to/from flash drives stuck on "5 seconds remaining" for 30 sec before finishing The flash drive I mainly use is USB quite new and easily capable of MB s writing speeds It reaches about - MB s during the copy until the final point where it still says MB s but does nothing for seconds USB port is also and I ve also tried every single other port in my computer None are broken and none ever show any signs of being slow The flash drive is NTFS formatted but it used to be FAT I ran checkdisk to see if there was anything wrong but there wasn t It s NTFS since I occasionally need files gt GB I tried using TeraCopy to bypass the issue but this way doesn t reach speeds of over MB s which takes even longer in the end It does fix the hanging at issue I tried converting the drive back to FAT which removes the issue of it hanging at but again the speed doesn t go above MB s which means it takes longer in the end making it not worth it What bothers me is that the files transfer at the maximum speed right until the very end where it just magically gets stuck for seconds or more before finishing like nothing happened Please advise P S I shamefully have to admit I never safely remove my hardware nbsp

A:Copying to/from flash drives stuck on "5 seconds remaining" for 30 sec before finishing

Marty9231 said:





Hello!

It may seem like a simple problem, but I know nothing of the subject and I've had the problem for ages.

Whenever I copy large files (Movie size, think 700MB+), the copy progresses very fast (~100MB/s) until it reaches about 99% where it gets stuck for about 30 seconds to a minute, and it says "Time remaining: 5 seconds" during all that time.

I have this problem with any flash drive, in any USB port (2 & 3). It also happens when copying to network drives and external harddrives, which leads me to think it's a software/windows issue.

Some vital information:

The flash drive I mainly use is USB 3.0, quite new and easily capable of ~150MB/s writing speeds. It reaches about 120-130 MB/s during the copy until the final point where it still says 130 MB/s but does nothing for 30 seconds.

USB port is also 3.0, and I've also tried every single other port in my computer. None are broken, and none ever show any signs of being slow.

The flash drive is NTFS formatted, but it used to be FAT32. I ran checkdisk to see if there was anything wrong, but there wasn't. It's NTFS since I occasionally need files >4GB.

I tried using TeraCopy to bypass the issue, but this way doesn't reach speeds of over 20MB/s which takes even longer in the end. It does fix the 'hanging at 99% issue'.

I tried converting the drive back to FAT32, which removes the issue of it hanging at 99%, but again the speed doesn't go above 20MB/s which means it takes longer in the end, making it not worth it.

What bothers me is that the files transfer at the maximum speed right until the very end, where it just magically gets stuck for 30 seconds or more, before finishing like nothing happened.

Please advise!!

P.S.: I shamefully have to admit I never safely remove my hardware. Click to expand...

Although I've had the same happen on my downloads, this "P.S.: I shamefully have to admit I never safely remove my hardware." could be part of the problem, good luck.
 

http://www.techspot.com/community/topics/copying-to-from-flash-drives-stuck-on-5-seconds-remaining-for-30-sec-before-finishing.207001/
Relevancy 21.93%

I need help picking out the right graphics card that I want/need/ I have a Dell OptiPlex 745, the small-skinny one and I am really looking to stay within or under $100 but I want one that will run some decent FPS games smoothly, not hard FPS games like Skyrim and COD. I have a 2.4 processor, 4Gb Ram and 200Gb hard drive. Please help.
 

A:Picking the right graphics card

The motherboard you have has a PCI Express 1.0a slot. You will have to find a video card that will work in that slot, because not all Graphics cards will just plug in and play. Not all PCI Express 2.0/2.1/3.0 cards will work with the PCI Express 1.0a slot.

Also, you need to look at your PSU (Power Supply) and determine if you have one that will be able to power the additional Graphics card. The highest wattage one that is included with the Dell OptiPlex 745 is a 305 watt capacity (and the lowest is 220 watts). The specs for the EVGA GeForce GT 730 (this is right from the EVGA Website) states:

300 Watt or greater power supply with a minimum of 20 Amp on the +12 volt rail.****
PCI Express, PCI Express 2.0 or PCI Express 3.0 compliant motherboard with one graphics slot.
Windows 8 32/64bit, Windows 7 32/64bit, Windows Vista 32/64bit, Windows XP 32/64bit
Don't like giving bad news, but I would say no this will not work. I would not actually try to upgrade this computer, because you will run into limitations quickly on what you can do. If you are insistent on getting better graphics, I would look at older graphics cards that are low profile and do not require too much wattage to run.
 

http://www.techspot.com/community/topics/picking-the-right-graphics-card.206963/
Relevancy 21.5%

Hi,

I bought a laptop this time 2 years ago. Suddenly wile watching a hd film in bed my laptop over heated and then crashed. So I waited then booted up again and now my good graphics card is not working
It is not being detected in device manager at all. Does anyone know how to fix this?

some details on laptop and graphics card. cost me a good bita dosh so would like to get it fixed
Chassis & Display Vortex Series: 17.3" Matte Full HD LED Widescreen (1920x1080)
Processor (CPU) Intel® Core?i7 Quad Core Mobile Processor i7-3840QM (2.80GHz) 8MB
Memory (RAM) 32GB KINGSTON HYPER-X GENESIS 1600MHz SODIMM DDR3 (4 x 8GB)
Graphics Card AMD® Radeon® HD 7970M - 2GB DDR5 Video RAM - DirectX® 11
 

A:Laptop Graphics card suddenly not detected

Ouch if the laptop over heats and shuts down and not recognized again it could actually be physical damage to the video card. Another way to test if the video card has completely failed is by plugging an external monitor into the display port on the laptop. It could connect via hdmi, vga, or possibly display port. If a picture appears on the monitor then it could possibly be software related if you dont see a picture the video card has failed for sure. If it has failed you will more than likely have to replace the motherboard. In rare chance the video card may not be intergrated to motherboard but I doubt it. If you know someone that could whats called (re-flow) the video card
 

http://www.techspot.com/community/topics/laptop-graphics-card-suddenly-not-detected.206677/
Relevancy 51.6%

Please help.. Can't connect to the wifi but using ethernet is working fine.. My phone could connect to the same wifi though
tried to backread some of the threads but didn't work on my laptop
 

A:Cannot "fully" connect to wifi but works fine on ethernet

Additional info. I am using Atheros AR5006EXS Wireless Network Adapter
and I did deleted the driver and it installed again automatically, but sadly it still doesn't work
 

http://www.techspot.com/community/topics/cannot-fully-connect-to-wifi-but-works-fine-on-ethernet.206650/
Relevancy 50.74%

I've been having an issue which started this morning. The previous night, I forgot to plug in my Dell Inspiron N5050 after using it. I woke up to find that my battery had died (obviously). I plugged in the laptop, running Windows 7 HE 64 bit, and turned it on. It booted normally and I was able to do all of my tasks as needed. Then I noticed my problem. The battery icon down on the taskbar showed that the device was plugged in, but was not charging. It has stayed at a constant 2% charge for more than 24 hours now. The Battery Meter stated that my battery is performing normally, so I ruled the battery out as the cause. The adapter I am using is the default one that came with the laptop when I bought it, and it appears to be functioning normally as well. What could be the cause of this incident, and what can I do to fix it?
 

A:Battery Stated as "Plugged in, Not Charging"

Most likely you have a bad battery. Dell has had whole series of batteries that they shipped out in a not fully functional state. I have an HP laptop (about 8 years old now) that the battery took a "steamy one" and it will no longer charge properly. You can try this trick (it may not work, but worth a try because did work for me a couple times): power down laptop and take the battery out for 30 minutes; replace battery and plug in charger but do not power on; wait 4 hours of charge and power on. I had it work a couple times that it gave a full 100% charge. Again, if it doesn't work then sorry, but at least you tried.
 

http://www.techspot.com/community/topics/battery-stated-as-plugged-in-not-charging.203683/
Relevancy 15.05%

Hello,
I seem to have quite an annoying problem with my new 256gb razerbalde. Whenever I launch a game I get a black screen the sound still works but no response from the screen, I have to put it to sleep and back on again and it works even though sometimes I need to do it 10 times or so. I have updated to all the newest drivers and tried a secondary display through hdmi it gives me the following error message: failed to initialize renderer. Unknow error creating the renderer. I only tried launching skyrim so far. The error seems to happen sometimes but not often when I will start the laptop and the screen will be the same. It's more of a black/greyish color and you notice that it is on.
Any help will be of great use. If the post already exists I am sorry and would be happy to get the link.
 

http://www.techspot.com/community/topics/razerblade-problems.206284/
Relevancy 15.05%

I'm having trouble staying on line with telstra connection my internet keeps freezing and dropping in and out I have had trouble with my home line phone and have a bullion modem which this isn't the problem, the problem I believe lays with telstra as I've checked with my server and with downloads and updated my PC so what can I do next.
Thanks
June
 

A:Having problems with connection dropping in and out

June Lomas said:





what can I do next.Click to expand...

Call Telestra
 

http://www.techspot.com/community/topics/having-problems-with-connection-dropping-in-and-out.206048/
Relevancy 21.93%

I recently bought a HP Pavilion 500-319a pc which has a 64 bit graphic card. I've also just bought a flight sim game that says it needs 128 bit.
Have I wasted my money or will the game still work on my PC?
 

A:Graphics card upgrade

It sounds like you are getting your specs crossed up. can you link to this game?
 

http://www.techspot.com/community/topics/graphics-card-upgrade.206034/
Relevancy 15.48%

I have been having quite a few issues with the motherboard I have from ASRock. It is the Z87 Extreme4. My issue is the usb 3.0 No matter what I plug in it says this device can perform faster than this blah blah blah. Anyway, that should not be happening as I am plugging in usb 3.0 devices. What is going on? The other problem is that my front ports that are from the mobod header will no longer recognize any of my external 2.5 hdd. 1 on the back also says this so I am limited to just 3 ports on the back that I can plug into with my external hdd and they are very important to what I do. Is anyone familiar with this? Is this only on this board or a common thing among ASRock? I have other computers and the usb 3.0 works just great.
 

A:USB 3.0 Problems

Have u Installed the drivers? I do not know any thing about ASRock but lots of USB3 have to have the drivers.
 

http://www.techspot.com/community/topics/usb-3-0-problems.205957/
Relevancy 49.88%

I used RV042 10/100 4-Port VPN Router. I've configured the dual WAN, and enable Load Balancing for faster internet. But if I accessedhttp://ipchicken.com/ my IP Address is always chaging? How can I setup the router sticking to just one IP address?
 

A:How to "Load Balance" without changing the IP?

Let me preface by saying....taking two circuits and using them at the same time, even with protocol management from the LB is most likely not worth the effort.

But for the sake of the argument, the first hurdle you have is that both circuits need to have static IPs. What type of connections are they?
 

http://www.techspot.com/community/topics/how-to-load-balance-without-changing-the-ip.205897/
Relevancy 15.05%

I have been experiencing some serious FPS problems with my Laptop recently. I Used to run games at somewhere from 60-120 FPS, but now its dropped down to 5-14 FPS. It happened recently. A couple days ago on Saturday Oct 4rth, I was playing Team Fortress 2 on Steam. I shut off my computer to go to sleep for the night and when I turned on my computer the FPS problem started almost immediately after I turned on the PC. Its not just Team Fortress 2 either, Its happening to all of my other games also. I am not sure on what to do and the only though that comes to my mind when I wonder what the problem could be is a virus. (I have virus protection Webroot but I'm not sure if it works to well.) I might have to Factory Reset my computer, but I want to try different solutions before I Factory Reset. Any Ideas?

My Laptop Info: http://gyazo.com/f1acf76e4e8e9febcec1e6e62991b297

/
 

A:FPS Gaming Problems

Back up your important data and do the Factory Reset. Apply all the Windows Updates, and then try your games. Webroot is not an antivirus program. Try installing MSE:
http://windows.microsoft.com/en-us/windows/security-essentials-download
 

http://www.techspot.com/community/topics/fps-gaming-problems.205822/
Relevancy 21.5%

Hello,

I'm really new to the tech/ computer world, and know next to nothing about graphics cards. I was wondering if someone could help me figure out what graphics card I can upgrade my computer to (if I can upgrade at all) I was wanting to buy the new Sims 4 game, but after having played a very slow and choppy Sims 3 for years on this computer, I'm ready to actually play a game smoothly without it freezing all the time.

Here's what computer I have:
Compaq Presario PC SR5601P
Processor: AMD Athlon X2 4400
Dual-Core Processor
Memory: 1 GB
Hard drive: 250 GB
Graphics: NVIDIA GeForce 6150 SE Graphics
Windows Vista SP 1

Thanks!
 

A:Unsure of what graphics card my computer can upgrade to

Sims 4 System Requirements & your PC system results

For Sims 4 according to the link above, your CPU GPU and memory is lacking for even the minimum system specs. We can recommend a GPU, but that's not all you need if you plan on playing Sims 4. And if you get a stronger GPU, chances are you will also need a stronger PSU. If 300W's is all you have for power, you are limited to sub $100 graphic cards. Which would be fine for Sims 4, but then you also have a CPU and memory that needs upgrading.
 

http://www.techspot.com/community/topics/unsure-of-what-graphics-card-my-computer-can-upgrade-to.205298/
Relevancy 15.05%

Hi all. Well I am having problems with turning on my Toshiba satellite c50-a-19t laptop. The night before there was a smell coming from the fan so I turned it off. I put it on charge in the morning and when it was fully charged I went to use it. The white light on the front goes on for a sec and then goes straight off and the laptop don't power up. Any ideas guys ???
 

A:Problems with laptop

Sounds as though it may have over heated and something may have shorted out. you will need to have it looked at your local repair shop.
 

http://www.techspot.com/community/topics/problems-with-laptop.204564/
Relevancy 21.5%

I have a Dell Optiplex 745 desk top form.ik it isnt THE best comp, but im wanting to upgrade the graphics card and power supply if I have to. just dont know where to start QQ inoob... any help would be appreciated ty

Operating System: Windows 7 Professional 32-bit (6.1, Build 7601) Service Pack 1
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: OptiPlex 745
BIOS: Phoenix ROM BIOS PLUS Version 1.10 2.6.4
Processor: Intel(R) Pentium(R) D CPU 3.40GHz (2 CPUs), ~3.4
 

A:Graphics card(s) for Dell Optiplex 745

Current power supply wattage and budget?
 

http://www.techspot.com/community/topics/graphics-card-s-for-dell-optiplex-745.200179/
Relevancy 34.83%

Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.
 

A:Dell 27" 5K Monitor

VitalyT said:





Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.Click to expand...

And I thought 4K was crazy high resolution already xD.
 

http://www.techspot.com/community/topics/dell-27-5k-monitor.205015/
Relevancy 21.93%

I'm new to the world of graphics, I have the following motherboard and specs on my pc:

DELL VOSTRO 260 INSPIRON 620 DESKTOP MOTHERBOARD GDG8Y CN-0GDG8Y

Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz
Intel(R) HD Graphics 64MB 1.3GB
3.0 GB RAM
Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit
HARD DRIVE: 450.9GB with 350.2GB free.

I'm trying to play Aion Free to Play (server based game) I've run the 'can you run it?' test on my PC and everything is fine expect my graphics as they are on board graphics. it recommends an NVidia GeForce 780 GT or AMD Radeon X1800 XL or better. I haven't been able to find either of these as they seem to be fairly old.

based on the specs and details provided can anyone tell me what is the best card I cant get that my machine will run and that will play the game.

many thanks
Leafeon
 

A:Graphics Help Needed

Any new $80 card or better will do just fine. Just make sure your power supply is strong enough to support the card you get.
 

http://www.techspot.com/community/topics/graphics-help-needed.204975/
Relevancy 15.05%

Hey.
Everytime I plug in the Ethernet cord to the router. It lights up and doesn't blink. After a couple of seconds, it just goes dark and I'm unable to use the router.

It works from time to time (I always have to unplug and it replug it back constantly) and I tried plugging in the router without the Ethernet plugged in and it looks like it works fine (Lights blinking). I plug in the Ethernet after that and it continues blinking for a few seconds then it darkens.

It's a Linksys router. WRT5462 V1 (Cisco)
 

A:Router problems -_-

Have you tried more than one cable? The cable could have gone bad.
 

http://www.techspot.com/community/topics/router-problems-_.204968/
Relevancy 14.62%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp

http://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Relevancy 21.5%

Hi first off ill let u know what im dealing with for specs...

Windows 7 ultimate - emachines el1333g amd processor 1800mhz
integrated nvidia geforce 6150

just added - radeon x1300/x1500 256mb

I installed the radeon and hooked up dual monitors via splitter

Now my questions are about using the integrated graphics as well.

Can I enable the integrated nvidia to use a 3rd monitor? I believe I can thru bios, but am nervous about bios.
Would enabling it help system performance even if not using a 3rd monitor?
Would enabling it help system performance if I used 1 monitor per video card instead of both thru the new radeon?

Thank you in advance
Dazz
 

A:New to graphics cards...couple quick questions

dazzbazz said:





Can I enable the integrated nvidia to use a 3rd monitor? I believe I can thru bios, but am nervous about bios.Click to expand...

I'm going to say no.

The reason I say that is unless you can connect the onboard graphics in SLI/Crossfire, the moment you insert the dedicated card, the onboard graphics will be disabled. Since you have nVidia onboard and inserted an AMD card, I know SLI/Crossfire is out of the question. But who knows, I could be wrong because I definitely don't know it all.

I will say making BIOS changes is not damaging. If you make a change that keeps the machine from posting, you can always pull the coin sized battery to default all the settings.
 

http://www.techspot.com/community/topics/new-to-graphics-cards-couple-quick-questions.204863/
Relevancy 48.16%

Hi, when I typed " dxdiag " it said n/a, last time I checked there was something written in it..
 

A:When I typed " dxdiag " it said n/a

Check your graphics drivers and install the latest one.
 

http://www.techspot.com/community/topics/when-i-typed-dxdiag-it-said-n-a.204746/
Relevancy 21.5%

My System Specs

OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Manufacturer MSI
System Model MS-7641
System Type x64-based PC
Processor AMD FX(tm)-4170 Quad-Core Processor, 4200 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. V17.10, 10/08/2012
SMBIOS Version 2.6
Hardware Abstraction Layer Version = "6.1.7601.17514"
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 7.98 GB
Available Physical Memory 4.32 GB
Total Virtual Memory 16.0 GB
Available Virtual Memory 11.4 GB
Page File Space 7.98 GB

I would like to get this graphics card http://www.dabs.com/products/asus-g...rage - Graphics, TV Tuners and I/O - Graphics will my system be able to handle this?
 

A:Graphics Card How Good Does My System Need To Be?

While it can handle it, it will be greatly bottlenecked by the CPU. Also, we need to make sure your PSU can handle it, so if you can post your full system specs including the PSU, HDD, motherboard,etc., that would great.

You can probably upgrade the CPU to an 8350 since it uses the same socket. But you may need to apply a BIOS update. BUT, before we get ahead of ourselves, please post full system specs like said above. Thanks.
 

http://www.techspot.com/community/topics/graphics-card-how-good-does-my-system-need-to-be.204430/
Relevancy 15.48%

Hey so I wasn t really sure where to post this as I am quite new to the forums but here I go So my first problem is with my laptop s adapter charger not really sure what it s called in english it no longer charges as in the tiny green light no longer turns on when I connect it to problems Two an outlet and yes I Two problems have tried more than just one outlet It s dead From what I ve read on the web I suppose the only way out is buying a new charger Or trying to open the charger box and fixing it Is that possible If so any tips on how to do that - My second problem is releated with the internet modem I have cable internet and after this storm a coupel of days ago it started playing tricks on me even though the cable is plugged into the pc and the modem is working for about a whole minute my pc says that the cable is unplugged and only after that does it recognize it and connect me to the internet Any ideea what s wrong I suppose there s fault in my modem because before when it worked just fine about three green lights turned on right after turning it on but now only two do the dsl and power one I don t know fpr sure but I think the third one used to be ethernet And that s about it If anything s unclear please ask english is my third language so I might have made some mistakes here and there thanks for your time nbsp

A:Two problems

DO NOT open that "charger box." It is dangerous to do so because it can hold a charge of electricity for quite some time. Either buy a new charger from the laptop manufacture or, if you can, purchase a new charger from the likes of Targus. I have a Lenovo laptop and bought the Targas brand as a back-up. It works great and Targus supplies several adapters to work on many different brands.

Secondly, was your modem and router plugged into a surge protector or do you have them plugged directly into the outlet?

Your English is quite good.
 

http://www.techspot.com/community/topics/two-problems.203854/
Relevancy 15.05%

Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
 

A:Dvd burner problems...any suggestions

They are so cheap now it is probably worth everyone's time to just get a new one.

If you really want to troubleshoot it, put it in a different computer or OS.
 

http://www.techspot.com/community/topics/dvd-burner-problems-any-suggestions.204100/
Relevancy 15.05%

Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
 

http://www.techspot.com/community/topics/having-problems-with-my-dvd-burner.204090/