I keep getting DNS errors when trying to use the internet on an iMac on my network. The DNS errors sort of come and go. RIght now it's fine, but 5 minutes ago it wasn't. It keeps happening. Now that I think of it, this iMac sometimes also has issues connecting to the internet. One second it's working, then suddenly browsing the internet just times out. Again, every other computer on the network would work fine though.
I'm behind a wrouter that's connected to a modem. How can I begin to figure out what's the issue?
Thanks in advance.
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Which OS X are you using? Try flushing the DNS cache: https://support.apple.com/kb/HT5343http://www.techspot.com/community/topics/dns-error-on-one-computer-in-network.191162/
hey guys, it would be great if you could help me out with this, i need to network my computers ASAP or i am busted !!
" office (name of network) is not acessible. You might have permisson to use this network resource. Contact the administrator of this server to find out if you have access premisson. "
i get this error when trying to see the workgroup computers on My Network Places
also when i try to add a new netowork place, and i select the computer i am refering to, on my list . . . My Network Places just freezes on me
also, side notes
- i am the adminstrator on this computer
- work group name is all same
- i can network two computers on this network and this one i cant
thanks alot in advance guys, you are the best
I need some help here!
I've just installed a Dynex wireless usb network adapter to my desktop pc, which was previously connect to my 2wire router via ethernet cable.
Not that i've installed the USB network adapter, i've unplgged the ethernet cable and i'm unable to use the internet! Despite that i've installe the USB network adapter!
I recieved the follog errow msg in the taskbar
...."This problem occurs because the network did not assign a network address to the computer"
What should i do?
Hold the Windows key and press R, then type devmgmt.msc
Under Network adapters, please tell me all the devices listed. Also, are there any devices anywhere in the Device Manager display with yellow ? or ! displayed?
Hold the Windows key and press R, then type CMD to open a command prompt:
Type the following command:
Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.
If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
Hi error address computer" not network assign network to a the did "The I ve just installed aN Encore wireless usb network adapter to my desktop pc which was previously connect to my wire router via ethernet cable Not that i ve installed the USB network adapter i ve unplgged the ethernet cable and i m unable "The network did not assign a network address to the computer" error to use the internet Despite that i ve installe the USB network adapter I recieved the follog errow msg in the taskbar quot This problem occurs "The network did not assign a network address to the computer" error because the network did not assign a network address to the computer quot What should i do thanks PS This is the info you requested in another post NETWORK ADAPTERS -BLUETOOTH PAN NETWORK ADAPTER -REALTEK RTL PCI-E Gigabit Ethernet NIC -REALTEK RTL B Wireless g Mbps USB Network Adapter CMD "The network did not assign a network address to the computer" error Screen C Documents and Settings Tomas Vecchi gt IPCONFIG ALL Windows IP Configuration Host Name TOMAS Primary Dns Suffix Node Type Mixed IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Media State Media disconnected Description Realtek RTL PCI-E Gigabit E thernet NIC Physical Address - D- - - -C Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Bluetooth PAN Network Adapter Physical Address - - - - - Dhcp Enabled Yes Autoconfiguration Enabled Yes IP Address Subnet Mask Default Gateway DHCP Server Lease Obtained S bado de Mayo de Lease Expires Martes de Enero de Ethernet adapter Wireless Network Connection Media State Media disconnected Description Realtek RTL B Wireless g Mbps USB Network Adapter Physical Address - -E - C-CA- E nbsp
Disable encryption and MAC Address filtering on the router and try to connect. Assuming success you can probably re-enable encryption and reconnect.
If unsuccessful make sure you have the latest driver for the wireless adapter. Make sure you have the latest firmware for the router; then reset the router to factory default settings and reconfigure it.
I have w10, running a static ip address through time warner cable in Ohio. Time warner said they had a problem on their end, ever since then I can't connect to our security cameras. I run a powerline from the house to the office., have reset my computer, modem and wireless router. Still getting the same error - one or more network protocols are missing from this computer. I don't know how to fix this. I tried talking w/ time warner cable - no go!
At least i am not the only person who has this problemhttp://www.tenforums.com/network-sharing/35400-one-more-network-protocols-missing-computer-error.html
On my Windows 7 Home Premium computer I have this problem. When I click a computer or NAS unit in the Network part in the Windows Explorer I just get an connection error dialog. If I try to connect via another machine (windows 7 Ultimate) I get a login dialog and have no problem connecting.
Both machines is on the same network using WORKGRUP. Both can connect the Internet and print to local printer.
The main problem is that I get no login dialog - just an error dialog. I can't find any way to manual edit this information.
Regards / Jimmy
Had this the other day with one of my Win7 boxes. You can manually enter login credentials for shares though control panel > user accounts and family safety > credential manager > Windows credentials > add a Windows credential.http://www.sevenforums.com/network-sharing/207084-error-trying-connect-computer-via-network-windows-explorer.html
I have a small home network with a A)Win7 desktop, B)a Win7 laptop, and C)an XP desktop. I work primarily with A.
I did some network refiddling to replace a router. All seems to be working, but when I try to enable Network Discovery or File & Printer Sharing on A, they turn themselves right back off again.
Investigating this, I am informed that the Computer Browser service must be running.
This service isn't running. Started, it stops itself after a minute or so, with no error or warning in the event viewer, just a calm notice that the service has stopped. No reason given.
Just about all of the help I can find involves some sort of error code. I was misled into firewall issues, but the firewall doesn't come into it until Network Discovery is turned on.
Can anybody spare me some light to solve this?
Usually just resetting winsock will fix this problem. At an elevated command prompt use the following commands one at a time, hit enter after each one.
netsh winsock reset catalog (reset winsock entries)
netsh int ip reset reset.log hit (reset TCP/IP stack)
Let me know if these commands have any effect on the problem you are seeing.
Everything was running smoothly last night and when I came back this morning, I found out that the way this computer accessed the internet was changed from wired to wireless. I promptly changed it back to wired and I am able to see every computer on the network via My Computer>Network but I am unable to access any of them as it is telling me that the network path was not found. Although, when I right click on the computer I am looking to access and select "Connect via Remote Desktop Connection" it patched me right through and I am able to see the desktop of the computer I am trying to access, which is the login screen for Windows Server 2003. Any help is appreciated. Thanks in advance.
Hi and Welcome to Seven Forums,
Have you tried reverting it back to a point when the computer was able to access the shared resources in your network by using the System Restore?
What type of Anti-Virus or Security program do you have installed from the problematic computer?
Ok so have a Dell Inspiron laptop that is running on Windows XP and I am unable to connect to the internet This happened a little over a week ago suddenly and everything that I have tried has been unsuccessful I connect to the internet through an ethernet cable that plugs directly from the wall to my computer however I cannot get internet because my computer is telling me that a quot Network Cable is Unplugged quot when reads detecting cable, a network cable "network unplugged" error not Computer it clearly is still plugged in I have tried using different cables and in different rooms of my apartment and yet I still have the same problem My other roommates are not having any issues so this lead me to believe there is probably a problem with my computer My computer skills are on a basic general knowledge basis so I have no idea how to Computer not detecting a network cable, error reads "network cable unplugged" begin to attack this problem Strangely enough in my attempts to get on the internet I turned on my wireless connection which displays a full connection in the icon at the bottom of my screen at good or excellent quality yet when I open firefox or explorer the browsers I use I still have no internet I am not sure if this is an indicator of the same problem I am having or just a separate issues but I am in desperate need of help So please if you have any suggestions I would greatly appreciate them nbsp
I have a second drive on my Vista desktop with several shared folders. Other computers on my network will get the error "Computername Not Available. You might not have permission to use this network resource" when trying to access it. Rebooting the Vista Machine fixes the problem but only temporarily. Sometimes for a few days, sometimes only a cpl of hours.http://www.vistax64.com/network-sharing/224223-error-message-when-you-try-access-vista-based-network-computer-you-might.html
When I try to access my DVR from remote location i get an error "Network Error Error No 7, either device is busy or network is exceptional, register Failed" Can any one suggest me
The URL of a shared folder on the LAN, copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine. From DOS terminal:
Since I have been home for holiday break I've been having incessant connectivity issues on my relatively new gateway laptop I see frequent random disconnections with no real explanation Most often I get the may with one adapters network on this problem or computer." be Error: a more "There quot problem with network adapters quot error but I have seen a few others that tell me there are no detected networks or that I simply quot cannot connect to wireless network quot I've read some threads on this forum that address similar issues but I have yet to find a solution Currently I can't even connect through ethernet and I am completely and utterly baffled in truth it has been all I can do not to throw my router laptop and Error: "There may be a problem with one or more network adapters on this computer." myself out of my second floor window I use a NETGEAR WGR v router with Windows Vista Home Premium bit OS I'd like to get this resolved before I return for spring semester without internet connection so please offer some insight as soon as possible I just hope this isn't a result of some hardware failure Thank you -Elijah
Hi Elijah, and welcome to the vista forums
I believe that this model router has a few compatibility problems with vista, check that the firmware in your device is the latest available
Have a look here for netgear's troubleshooter for this particular model ...
WGR614v7 Support Page
Hi everyone thanks for all your help in another question i posted a while ago about how many computers can your power supply support and found out it doesn t really matter as they don t drain much power I am trying to network my windows XP SP to a Windows computer and am having trouble I tried running My computer. skrewd, tryin network is to computer am and 98 to a network setup wizard mulitple times making a setup disk to use in the and make IP address both the same with My computer is network skrewd, and am tryin to network to a 98 computer. both the same work group name but have all failed I have trouble in the past networking my XP SP computer when it was connected to another Xp computer in the house but one day just stop working and whenever it is plugged in that computer and is linked i click on the workgroup and the computer freezes I think i stuffed up my computer somehow cause the login screen is changed to a network login rather than a icon and name login which is what i want to change it back too I am trying to eventually make My computer is network skrewd, and am tryin to network to a 98 computer. a network with or XP computers and a windows computer for a linked birthday party but am stumped so far as i plan it for next saturday PLEASE PLEASE PLEASE CAN YOU HELP ME WITH ALL MY PROBLEMS Thanks any help would be greatly appreciated nbsp
Hello. I am after some help regarding installing some software called Pensions Profiler on a clients computer.
Firstly the computer - Windows XP Pro, all windows updates installed.
Pensions Profiler - Installed on their server but installed on each pc. Everyone's pc is fine except one. They have a mapped network drive linking them to the pensions profiler section of the server.
When installing, it does not get very far before displaying the following error.
Pensions Profiler Installer Information
Error 1606. Could not access network location CMNet\Network Path\.
I have checked the Microsoft site but nothing comes back into relation with "CMNet\Network Path\." part of the error.
Look forward to reading some replies.
All registry has been checked in relation to similar problems on the Microsoft support website and all registry entries appear to be fine. Error message attached as a pdf.
If the installation file is an 'MSI' file (ie it uses the Microsoft Installer), this may help: http://windowsxp.mvps.org/msi1606.htm
I installed iogear bluetooth on my pc sometime last year but didn't use it but now I need it to communicate to my cell phone. When I inserted the adapter I get the error: network cable unplugged.
I can see the software is there but not sure how to proceed.
PRODUCT: HP Chromebook 11 G4S/N: 5CD5515QDCGoogle Chrome OS Version 50.0.2661.103Platform 7978.74.0Firmware Google_Kip.5216.227.25 This device is frustrating my spouse to no end. It keeps dropping our home wifi network connection. I have to shutdown power, wait, and power back on and it refreshes. This is annoying. I am seriously considering returning this device. The whole point of this purchase was stability and ease of browsing and light internet use. Frustration is not part of the purchase.http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Network-Connection-Error-Dropped-Home-WiFi-Network-only-on/td-p/5638654
Hi Operating system is Windows Enterprise Edition SP and Office Professional is installed nbsp User clicks one the file opens fine Change one character or a bunch then click SAVE nbsp We get quot There has been a network or file the error. has been file may network a lost be permission connection or network there permission error The network connection may be lost quot If I attempt to save it as a new filename the new filename is written in the shared folder but has a size there has been a network or file permission error. the network connection may be lost of K and the Save As window pops up again nbsp Any attempt to save as ANOTHER name produces the same results K size file written Save As window pops up I found a document from MS that says to save to your desktop or map a new drive but this was working just fine a short time ago This issue happens for only one machine If the same user logins to the different machine and it works Who ever login to the laptop get the same error nbsp Below did not help as nbsp it was for Office and Windows XP https support microsoft com en-us kb https support microsoft com en-us kb https support microsoft com en-us kb What has to be done for this Regards Boopathihttps://social.technet.microsoft.com/Forums/en-US/4eb5d0af-32bb-4640-9691-b90a6406d24c/there-has-been-a-network-or-file-permission-error-the-network-connection-may-be-lost?forum=w7itpronetworking
I have a VPN link to my file server and when I try to save to it in Word it comes up with There has been a network or file permissions error. The network connection may be lost. File name.
I have two computers which do this. One is running Windows 7 and the other is Vista Business.
I have researched this a bit but have not had any luck at all.
Have tried disabling offline files, adding formatdatabase registry key, disabling indexing, windows hotfixes, disabling antivirus, deleting the client side cache folder but no luck.
The AV is Kaspersky on each machine but doesn't seem to be the problem.
Any help will be appreciated.
I have a sony vaio running windows vista home premium My local area adapter is Marvell Yukon E PCI-E Fast Ethernet Connection Although the ethernet cable is plugged in I cannot connect to the internet I am in a college dorm and have tried connecting the laptop to others cables who are not having connection problems Yet my computer still cannot connect Note My computer was NOT having issues a few days ago and had been working fine for a couple of weeks Since then I haven t changed any settings etc etc I have updated the driver for the Marvell Yukon adapter which hasn t rectified the problem I have also tried resetting the winsock catalog I forget the exact name of the commands but there was two of them I typed in using the command prompt Both were completed successfully but did not solve the problem Network Can't the Adapter Network Error- to Connect Vista I have also compared my settings with another recent Marvell Yukon adapter in IPv and IPv with a friend s computer to verify that the same options are selected and they are identical Both Vista Network Adapter Error- Can't Connect to the Network are set up to get automatically assigned IP addresses The exact message Vista Network Adapter Error- Can't Connect to the Network I get when trying to diagnose and repair the local connection is quot Plug cable into the Network Adapter Local Area Connection quot The computer is very new within the past few months and I ve done basic searches of the registry and startup files to see if anything nasty had managed to get in although I would expect much worse problems if that were the case and I haven t found anything Any help or suggestions would be greatly appreciated If there s another thread somewhere with this problem that I missed while searching the site I apologize for the double topic Thank you for your time nbsp
Ok I have computers on a home network Windows XP and one Redhat Linux Fedora Core About a month ago one of the windows boxes 1 computer network now has file transfer on network slow a internet suddenly and on suddenly went 1 computer on a network suddenly now has slow file transfer on internet and network from about Kb s download to Kb s download from various newsgroups Also when trying to pull AND push files to that same box it is a very slow file transfer I didn t load any new 1 computer on a network suddenly now has slow file transfer on internet and network software in that time and I waited so long because at the time the newsgroup server that I am using reported problems associated with Hurricane Rita This of course doesn t explain the network speed I ve run speed tests on all the other computers and they all report download speeds of about Kb s and upload speeds of about Kb s except the one and it has download speeds of about Kb s and upload speeds the same about Kb s After I noticed the speed reduction I loaded a firewall Protowall and I downloaded the latest beta of Microsoft Anti-Spyware and ran it Also I have Norton with the latest updates and it reports no problems Please let me know if you need more info or if someone had any general tips to try I am about at the end of my rope and reformatting looks like the only other option to me Thanks Mike in Ohio Edit Forgot to say I went to differnt speed testing web sites and they all report the download speed the same on that one box about Kb s and the others are around Kb s nbsp
Are all the computers wired similarly? All run to the same router/switch?
You should check the cable of the problematic machine, try using ping to the router with 1400 byte packets. Also, boot up some CD Linux or equivalent and see what speeds you get from there - helps to rule out any problems with the operating system.
I saw another post that had the exact same problem I m having just that my problem is on a desktop We got wireless internet a few months ago and my desktop was working fine with it Have a wireless adapter for Wireless Losing Adapter Computer and Network Network Recognition the internet Then a few weeks ago the internet started randomly disconnecting from only my computer I thought it was a network problem But then I hit something and the internet was working fine again for a few weeks Now it s Computer Losing Wireless Network Adapter and Network Recognition on the fritz Computer Losing Wireless Network Adapter and Network Recognition again starting yesterday When I try disconnecting and then reconnecting to the network it will tell me that there were no networks to connect to And when I unplug the adapter and plug it back in to the usb ports it ll tell me that my computer can t recognize the adapter that it s malfunctioning I ve tried the adapter in all the ports and it gives me the same message I have to restart my computer to get it to both recognize the adapter and the network so it ll connect again once it s restarted The internet will last for random periods of time When the internet goes out I get the yellow triangle error thing first on the network icon it doesn t just go right to there being nothing period and having the X symbol only after I try disconnecting from the network Sometimes all day then I ll leave the computer on over night and find the internet is out again on it in the morning Or it ll last for only a few minutes Sometimes the computer won t lose the network if I try disconnecting and reconnecting from the network It ll reconnect to the local network but when it s trying to find the network to connect to the internet it can t find it It ll say undiscovered network I thought maybe the adapter was faulty so I ve tried switching it with the adapter from another computer It still did the same thing with the other adapter And nothing is wrong with the adapter I was using it worked fine in the other computer when I put it in Both adapters are good When the usb ports stop working for the adapter it s only the adapter having problems Everything else still works fine I have no clue what the problem could be I never had any network internet problems when we had wired internet Here is the system info for my computer I really need help this is causing me heart attacks x x I really don t understand much about computers so if any help could be explained really simply and in a lot of detail so I can understand I d really appreciate it Tech Support Guy System Info Utility version OS Version Microsoft Windows Vista Home Premium Service Pack bit Processor AMD Phenom tm Quad-Core Processor x Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce GTS Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB E Total - MB Free - MB K Total - MB Free - MB Motherboard ECS Nettle Antivirus AVG Anti-Virus Free Edition Updated and Enabled nbsp
Do other usb devices work fine on the computer? For instance, if you plug in a thumb drive the computer, is the computer able to recognize the drive as well as read/write data to it?
My computer is a bit Win SP with Pentium Dual Core Ghz and Gb of Ram on a wired network My wife has a Cannot Network from Computer Wired Network Ping a on Wireless similar system using a wireless network She can ping my IP Address but I cannot ping hers We both have full access to the Internet We are using the same workgroup and both computers have file and printer sharing enabled and IPv addresses and DNS server addresses selected automatically The problem appears to be with my computer but I don t know how to solve it Please help Here are my system stats Tech Support Guy System Info Utility version OS Version Microsoft Windows Home Premium Service Pack bit Processor Pentium R Dual-Core CPU E GHz x Family Model Stepping Cannot Ping Computer on a Wireless Network from Wired Network Processor Count RAM Mb Graphics Card Intel R G Express Chipset Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB M Total - MB Free - MB Motherboard ASUSTeK Computer INC P G -M LE Antivirus Microsoft Security Essentials Updated and Enabled nbsp
I have an older Dell desktop computer that I have had connected to my network using a D-link wireless router network is Computer thinks secure unsecure network and a D-link USB wireless adapter This may be extra information but I am including it in case it is relevant The USB adapter failed about months ago I replaced it with another D-link USB Computer thinks unsecure network is secure network adapter That adapter failed last week After hours on the phone with D-link they the device wasn t working properly and sent me Computer thinks unsecure network is secure network a return material authorization Computer thinks unsecure network is secure network I couldn t find my receipt so the RMA was no good I a TP-Link USB wireless adapter this time WN- N After I installed the software for the new adapter tried to connect to my home network and it asks me for a network key My home network is not secured I have other laptops at home that all can connect to the network without a password In the network lists on the laptops my home network shows up as unsecture On the desktop the home network shows up as secured The TP-Link help desk had never heard of this problem and couldn t help me nbsp
Ugh. I can't get on to the internet. My house is pretty big so I have an extender (Netgear EX2700 N300) in my room. When I run the troubleshooter, it says "one or more network protocols are missing from this computer" and I can't find a solution online. Help!
Btw, I'm using another computer in my house that works fine to type this post in
I assume you're trying to connect over wifi?
Did you make sure and install the latest drivers for your wifi card, from the wireless card manufacturer's website?
What OS are you running?
Open the Network Adapters window, and right click your wifi adapter -> Properties -> Post the contents of the "This connection uses the following items" list.
Hi everyone quick story to detail my exact problem though this thread showed the same problem with no working solution for me I installed Win on a separate partition use Win Ultimate x normally and was using it It worked fine I connected my iPhone to charge it when the phone automatically activated a tethering app This instantly switched my wired network connection to the USB connection which I immediately disabled As soon as I did that my wired connection my hard wire internet not the tethered iPhone connection stopped working and showed the network only as quot Unidentified network Thus the error Now I followed all of the instructions in the previously linked thread I even reformatted my hard drive to for Unidentified network home error Network no avail Microsoft support wants me to pay not gonna happen Furthermore I know it isn't a router or actual network issue because my desktop is the only machine with that problem My xbox was streaming TV over the same network when it all occurred and Unidentified Network error for home network it is doing so as I type this I switched the cables obviously rebooted multiple time the whole nine yards What makes it worse is every time I try to diagnose the problem Windows just tells me to reset my router I even tried that but obviously it didn't work After every reboot my IP changes back to a address Every time I manually set it no change It seems like no matter what I do it won't get fixed The only thing Microsoft support said I should do is search for updated drivers for my NIC This shouldn't be necessary since I reformatted once before and I didn't need to update my drivers to access the internet I'm about a day away from just scrapping the whole thing for parts Any help is greatly appreciated
It sounds like your machine is having a hard time picking up the router. The 169 address is what you get when the router isn't being picked up by the machine. It's like a generic IP that Msoft uses when nothing is available.
You also take your chances plugging anything Apple into a Windows PC, seems to be when the problem started. That is what the entire Bonjour fiasco is about.
Have you tried updating the firmware on your router because something doesn't seem right there.
Updating the drivers might also be good advice. You haven't listed any system specs so I can't do that for you.
If all else fails you could try typing your default gateway from your router into your IPv4 settings window. The link below shows you how.
I have a customer that is running Vista Home she setup a wireless network at her house and it sees the router and it has good signal but when you go to connect to it it tries for about 2 to 3 seconds the gives the error that the network is marked as a "hidden" network and or is not in range any help would be greatly appreciated.
P.S. brought back to my office and it connected fine and she has a laptop right next to it that is on just fine, and the network is broadcasting the ssid
Did you try to re set up the network again at her house? I would delete all the settings and start from scratch.http://www.bleepingcomputer.com/forums/t/140949/the-network-is-marked-as-a-hidden-network-error/
Windows 8.1 Pro with Media Center,
Pro Media can access 8.1 Network and Homegroup.
8.1 cannot access ant Pro Media.
"Windows cannot access \\Desktop\Users\Pete\Documents' (or any other folder)
Can access IP4 address.
Windows 8.1 new machine, came with 8, updated to 8.1 then 8.1 Update.
Firewall software on the computers would be the first thing to start looking at. Also make sure that folders are allowed to be Publicly shared.http://www.eightforums.com/network-sharing/46944-network-error-accessing-both-homegroup-network.html
Hi everyone A few days ago my computer was infected with OpenCloudSecurity spyware and after multiple virus spyware No network access, network error unidentified scans I finally got rid of it Unfortunately sometime during this my Toshiba Satellite laptop No network access, unidentified network error stopped connecting to my WiFi I know it's not the router or modem because my phone and my brothers laptop the one I'm using now still connect fine I even tried connecting it directly to the modem I've searched up and down on different forums on the net for fixes and tried many of them unfortunately to no avail Usually when this stuff happened I would just restore my system Upon trying to my disappointment no restore points Damn I tried fixing my registry with WinASO Rescanned with my virus scanners Disabled and Re-enabled the Network card Reset the ipconfig setting under command prompt I'm at a loss at this point and it's been going on a week that it hasn't connected If anyone could help me you'd be a life saver Thanks a bunch P S - Not sure if this helps but here's my copy pasta'd ipconfig settings Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C windows system gt ipconfig all Windows IP Configuration Host Name Tom-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless No network access, unidentified network error LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Virtual WiFi Miniport Adapter Physical Address - A- - -F -E DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL SE Wireless LAN PCIE Netwo rk Adapter Physical Address - A- - -F -E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d eb c aa Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address - - -E -CA-F DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap A CD-D - C - D -CC D Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes C windows system gt
Welcome to SF,
Try resetting both TCP/IP and Winsock:
Click on Start=> All Programs => Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.
Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log press enter
Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log press enter
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog press enter
Restart the computer after.
Hello there; My windows 7 computer was connected to my home's wireless network yesterday perfectly normally. I drove last night to my mother's house and proceeded to connect to her own wifi router wirelessly. Although my sister's computer that's on windows 7 connects ably, and both our iPhones connect, my computer will not. My computer finds the network( it is unsecured without a password if that makes a difference ) connects, receives an ipv4 address in ipconfig, yet does not obtain Internet access. It labels the network as an "unidentified network". If you do know how to fix this problem, please let me know; I will be forever in your debt.
Ipconfig /release tells me "The operation failed as no adapter is in the state permissible for this operation." Despite having run CMD as an administrator.
You just need to re-identify the network with windows.
Last time you may have checked the bx at the bottom by mistake.
plz write back quickly
Do you have a router?
Right click your Network Connection > Properties > highlight Internet Protocol (TCP/IP) in the window that loads. The option will be available in there to automatically assign IP address.
I have an HP laptop running windows xp Wherever i did network to network assign not computer address the go i am able to connect through wifi with a password except for where i live I have had no problems connecting anywhere else All other laptops and pc s connect through the network i cant access I get network did not assign network address to the computer a limited or no connectivity message with details displaying either network did not assign a network address to the computer cannot connect to the internet or cannot renew ip address I reviewed a few older posts and have tried ipconfig release ipconfig renew ipconfig all to no avail i also tried netsh ip reset reset log and netsh windows catalog or something along those lines from the earlier post i read still nothing I do notice that when i network did not assign network address to the computer go to properties the wep password always reverts to one i did not enter and once in a great while when i re-enter it the icon will show connected to network excellent signal strength but Internet Explorer says not able to connect I cant seem to figure out why i connect fine everywhere else and why every other guest computer connects to this network i connect using Intel R PRO wireless BG under properties gt general under properties gt wireless networks gt association use windows to config is checked under properties gt network gt properties the network authentication is open and data encryption is set to wep while the network key reverts to something i did not enter key provided is not checked under properties gt wireless networks gt authentication enable ieee x authentication for this network is not checked Can anyone help Please p s i used the info from john will to scotty john are you or anyone else out there nbsp
My laptop picks up wireless signals just 'The a assign computer' thanks Gee address network to the network not e_e did fine I ve never had a problem except with my Dad s computer He has the verizon modem 'The network did not assign a network address to the computer' Gee thanks e_e router and it gives off a signal except I always get slammed with the Limited to No Connectivity balloon and it tells me the network 'The network did not assign a network address to the computer' Gee thanks e_e didn t assign a network address to the computer I don t even know what that actually means and entails let alone how to fix it I ve rebooted the PC the modem router and my laptop I ve copy and pasted into the browser to see if that would work A verizon page did come up with a user login but I couldn t even use that because the password field was faulty extra characters kept showing up that I wasn t typing My laptop and the PC are both on Windows XP so it isn t that they re too old either I m just not tech savvy at all gt lt Any thoughts If more information is needed let me know and I ll do my best to provide it nbsp
Tech Support Guy System Info Utility version 220.127.116.11
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: AMD Sempron(tm) Processor 2500+, x86 Family 15 Model 44 Stepping 2
Processor Count: 1
RAM: 447 Mb
Graphics Card: VIA/S3G UniChrome Pro IGP, 64 Mb
Hard Drives: C: Total - 29996 MB, Free - 12475 MB; D: Total - 21006 MB, Free - 20873 MB; E: Total - 25336 MB, Free - 21988 MB;
Motherboard: ASUSTeK Computer Inc., K8V-MX
I am using Microsoft Windows XP Professional, Service Pack 2, 32 bit to post this question but
I got the error message as stated in the attachment while I was working in Microsoft Windows XP Professional, Service Pack 3, 32 bit which is installed as another OS in the other partition of my Hard Drive .
are they both genuine copies of XP
Also update the SP2 version to SP3
do any of the XP systems work and get an IP assigned
What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, kaspersky or Mcafee or any free security suites like zonealarm, AVG , Webroot etc
Please someone help me I am running XP Home edition with IE All updates have been installed for both packages in addition all updates for other programs have been updated and installed when appropriate MS Office With MS Outlook has been from D:\Data1.msi while reading network Error:1316 occurred the error file: working on my POC almost flawlessly for several years All of a sudden it has been acting funny So I decided to reinstalled repair it I have a hard time updating and repairing Office I keep getting the error message code networking error DATA pro msi I have followed MS help site word by word but to no avail http support microsoft com kb I did a virus info update and full scan Scanned Error:1316 network error occurred while reading from the file: D:\Data1.msi for spy ware with two packages Ad Aware and A-Square Defragged Checkdsk Registry cleanup Removed all startup items that aren t necessary Tried disabling the anti-virus software I also ran an XP system repair and a system file check Cleared all Temporary Internet Files and cookies etc I usually run http www ccleaner com CCleaner on start-up I disable the Find Fast Indexer http support microsoft com default amp Product ofw or http tinyurl com tkwm Tried to run system restore and did not work I copied the entire CD s content to the hard drive and perform following steps o xcopy e newcopy f s e i h - Opened the Setup ini file on the hard drive - Changed the quot MSI Data Pro msi quot line to quot MSI Data msi quot - Saved the changes made to Setup ini - Renamed Data Pro msi to Data msi - Run Setup exe o Did not work Nothing seems to work When I try to unistall it I get the same error message Help Please nbsphttps://forums.techguy.org/threads/error-1316-network-error-occurred-while-reading-from-the-file-d-data1-msi.761013/
Laptop running XP came up with this error today First is gave the Network Control errors about IP addresses accessing different things that took me to a list of bogus anti-virus software to download This eventually leads to Internet Explorer launching a bunch of windows full of bad links like a bunch of porn type stuff Then it would not let me click on anything to install any scanning software without the Application cannot be executed error Finally I was able to run rskill from a usb drive and that stopped the Application cannot be executed error but the other Network Control popup keeps coming back I scanned with Adaware and executed Error The infected error file Conrtol be pplication cannot - is Network removed those results I tried to scan with Spybot but it would not without an update and I did not want to connect to a network I scanned with superantispyware scanner and removed what it found I tried to scan with avast but the Network Control error came up and rebooted the machine by force and stopped that Tried that twice with the same result I was Network Conrtol Error - pplication cannot be executed The file is infected error able to get into Add Remove programs and found the MediaBar installed I took that Network Conrtol Error - pplication cannot be executed The file is infected error off -- Network Conrtol Error - pplication cannot be executed The file is infected error wondering if that was the start of all this GMER scan too forever about hours and the Network Controll popup caused a forced reboot before it could finsih so no GMER log yet DDS Log DDS Ver - - - NTFSx Run by Admin at on Mon Internet Explorer BrowserJavaVersion Microsoft Windows XP Professional GMT - AV avast Antivirus On-access scanning enabled Outdated DB - F - A -B - A FD D Running Processes C WINDOWS system Ati evxx exe C WINDOWS system svchost -k DcomLaunch svchost exe C WINDOWS System svchost exe -k netsvcs C Program Files Intel Wireless Bin EvtEng exe C Program Files Intel Wireless Bin S EvMon exe C Program Files Intel Wireless Bin WLKeeper exe C Program Files Intel Wireless Bin ZcfgSvc exe svchost exe C WINDOWS system Ati evxx exe svchost exe C WINDOWS Explorer EXE C Program Files Lavasoft Ad-Aware AAWService exe C Program Files Alwil Software Avast AvastSvc exe C WINDOWS system spoolsv exe C PROGRA Intel Wireless Bin XConfig exe svchost exe C Program Files Common Files ArcSoft Connection Service Bin ACService exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C Program Files Bonjour mDNSResponder exe C WINDOWS eHome ehRecvr exe C WINDOWS eHome ehSched exe C Program Files Java jre bin jqs exe C Program Files Dell NICCONFIGSVC NICCONFIGSVC exe C Program Files Intel Wireless Bin RegSrvc exe C Program Files Common Files SafeNet Sentinel Sentinel Keys Server sntlkeyssrvr exe C Program Files Common Files SafeNet Sentinel Sentinel Protection Server WinNT spnsrvnt exe svchost exe C WINDOWS system svchost exe -k imgsvc C WINDOWS system wuauclt exe C WINDOWS system dllhost exe C WINDOWS ehome ehtray exe C Program Files Apoint Apoint exe C Program Files Intel Wireless Bin ifrmewrk exe C Program Files CyberLink PowerDVD DVDLauncher exe C Program Files Real RealPlayer RealPlay exe C WINDOWS system dla tfswctrl exe C Program Files Common Files InstallShield UpdateService issch exe C WINDOWS System spool DRIVERS W X E FATIACA EXE C Program Files iTunes iTunesHelper exe C Program Files Java jre bin jusched exe C Program Files Picasa PicasaMediaDetector exe C Program Files Common Files ArcSoft Connection Service Bin ACDaemon exe C WINDOWS eHome ehmsas exe C Program Files Adobe Reader Reader Reader sl exe C PROGRA ALWILS Avast avastUI exe C Program Files Apoint Apntex exe C WINDOWS system ctfmon exe C Program Files Google GoogleToolbarNotifier GoogleToolbarNotifier exe C NetworkControl nc exe C Program Files Common Files ArcSoft Connection Service Bin ArcCon ac C Program Files Spybot - Search amp Destroy TeaTimer exe C... Read more
Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.If you have already posted a log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.We need to see some information about what is happening in your machine. Please perform the following scan:Please download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Push the button.Two reports will open, copy and paste them in a reply here:OTListIt.txt Will be openedExtra.txt Will be minimizedPlease download GMER from one of the following locations and save it to your desktop:Main MirrorThis version will download a randomly named file (Recommended)Zipped MirrorThis version will download a zip file you will need to extract first. If you use this mirror, please extract the zip file to your desktop.Disconnect from the Internet and close all running programs.Temporarily disable any real-time active protection so your security programs will not conflict with gmer's driver.Double-click on the randomly named GMER file (i.e. n7gmo46c.exe) and allow the gmer.sys driver to load if asked.Note: If you downloaded the zipped version, extract the file to its own folder such as C:\gmer and then double-click on gmer.exe.GMER will open to the Rootkit/Malware tab and perform an automatic quick scan when first run. (do not use the computer while the scan is in progress)If you receive a WARNING!!! about rootkit activity and are asked to fully scan your system...click NO.Now click the Scan button. If you see a rootkit warning window, click OK.When the scan is finished, click the Save... button to save the scan results to your Desktop. Save the file as gmer.log.Click the Copy button and paste the results into your next reply.Exit GMER and re-enable all active protection when done.-- If you encounter any problems, try running GMER in Safe Mode.-------------------------------------------------------------In the meantime please, do NOT install any new programs or update anything unless told to do so while we are fixing your problemIf you still need help, please include the following in your next replyA detailed description of your problemsA new OTL log (don't ... Read morehttp://www.bleepingcomputer.com/forums/t/335054/network-conrtol-error-pplication-cannot-be-executed-the-file-is-infected-error/
i am creating a local network of just 2 PCs. 1st one is using windows 7 OS and the 2nd one is using windows 8.1 . Error i am facing is when i click on TCP/IP(v4) properties in 2nd PC(win 8.1 pc) it says that ""In order to configure TCP/IP, you
must install and enable a network adapter card.". 1st pc is working fine and showing shared drives and files in network but 2nd PC is not showing anything in network because id donot allow me to configure IP settings.
Please Note that i have also connected WiFi connection to my 2nd PC and that connection is working fine and showing all the TCP/IP Properties correctly without showing any error.
I have disabled Network adapter in Device manager and installed again but nothing happens.
Help me in this Please
Hope someone can help me here Don't know if it's a Windows issue or a Hardware issue Some files will not transfer to my External Network HD and give the following error message There is a problem accessing SZOSTAKHDEXT Public make sure you are connected to the Network Network Error HD with External network and try again Tried from this Win desktop to XP desktop and same issue some files copy some Network Error with External Network HD don't Go the other way from XP desktop to this Win desktop and everything copies fine Everything copies from the Network Error with External Network HD Ext Network HD to this Win desktop no problem The file size doesn't seem to matter too much by that I mean large mb or small mb some files won't copy I keep trying the same files over and eventually some of them will copy but some just don't want to at all I have a notebook with Win and it has no problem copying the same files that won't copy from my desktop I have an XP desktop that will copy just fine also The desktop in question here is running Win Pro bit The onboard NIC has been disabled and a replacement NIC has been put in the system Agere Systems ET- x PCI-E Gigabit Ethernet Adapter has been in use for about a year now Just got the Ext HD months ago Thinking about replacing the NIC with a different one to test it out Anyone have any insight before I do Chris
Can you check the LAN adapter's Properties - Speed & Duplex and change it other than the default value?http://www.bleepingcomputer.com/forums/t/489034/network-error-with-external-network-hd/
i hope network error 1000 error application event someone can assist on what to do with this error Log Name nbsp nbsp nbsp Application Source nbsp nbsp nbsp nbsp Application Error Date nbsp nbsp nbsp nbsp nbsp PM Event ID nbsp nbsp nbsp Task Category Level nbsp nbsp nbsp nbsp Error Keywords nbsp nbsp nbsp Classic User nbsp nbsp nbsp nbsp nbsp N A Computer nbsp nbsp nbsp Angela-PC Description Faulting application name network error event 1000 application error McSvHost exe version time stamp x aee a Faulting module name HOMENE DLL version time stamp x a b Exception code network error event 1000 application error xc Fault offset x d cb Faulting process id x f Faulting application start time x d network error event 1000 application error f dfb fbc Faulting application path C Program Files Common Files McAfee Platform McSvcHost McSvHost exe Faulting module path c PROGRA COMMON mcafee mhn HOMENE DLL Report Id ba cb c- c- e - a - b d Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt nbsp lt System gt nbsp nbsp lt Provider Name quot Application Error quot gt nbsp nbsp lt EventID Qualifiers quot quot gt lt EventID gt nbsp nbsp lt Level gt lt Level gt nbsp nbsp lt Task gt lt Task gt nbsp nbsp lt Keywords gt x lt Keywords gt nbsp nbsp lt TimeCreated SystemTime quot - - T Z quot gt nbsp nbsp lt EventRecordID gt lt EventRecordID gt nbsp nbsp lt Channel gt Application lt Channel gt nbsp nbsp lt Computer gt Angela-PC lt Computer gt nbsp nbsp lt Security gt nbsp lt System gt nbsp lt EventData gt nbsp nbsp lt Data gt McSvHost exe lt Data gt nbsp nbsp lt Data gt lt Data gt nbsp nbsp lt Data gt aee a lt Data gt nbsp nbsp lt Data gt HOMENE DLL lt Data gt nbsp nbsp lt Data gt lt Data gt nbsp nbsp lt Data gt a b lt Data gt nbsp nbsp lt Data gt c lt Data gt nbsp nbsp lt Data gt d cb lt Data gt nbsp nbsp lt Data gt f lt Data gt nbsp nbsp lt Data gt d f dfb fbc lt Data gt nbsp nbsp lt Data gt C Program Files Common Files McAfee Platform McSvcHost McSvHost exe lt Data gt nbsp nbsp lt Data gt c PROGRA COMMON mcafee mhn HOMENE DLL lt Data gt nbsp nbsp lt Data gt ba cb c- c- e - a - b d lt Data gt nbsp lt EventData gt lt Event gt hope someone can help with the following on my event log as i dont know what to dohttps://social.technet.microsoft.com/Forums/en-US/4eb50eee-9717-40f1-aef9-5a3df29b7c7d/network-error-event-1000-application-error?forum=w7itpronetworking
Hello I recently switched out unexpected 0x8007003B: error occurred network Error An an older Netgear router for the Netgear WNDR I have a TB WD MyBookWorld connected Error 0x8007003B: An unexpected network error occurred via ethernet to the router Ever since the router switch I have been having two specifice issues While uploading videos to Facebook the video will upload Error 0x8007003B: An unexpected network error occurred anywhere from several MB up to over MB then stall saying it's still uploading but trust me it isn't I can copy files folders from the networked hard drive to my computer flawlessly but when I try to copy files folders from my computer to the networked hard drive it copies anywhere from a few seconds to maybe a couple minutes then stalls out giving the error message quot Network Error There was a problem accessing SERVER FOLDER Make sure you are connected to the network and try again quot with Retry Skip and Cancel When cancel is pressed it gives quot An unexpected error is keeping you from copying the file If you continue to receive this error you can use the error code to search for help with this problem Error x B An unexpected network error occurred Other useful information on the new router the WNDR if I use WEP security I can copy files folders to the hard drive no problem However if I try to use WPA WPA the abovementioned problems occur I would use WEP and just forget the hassle but WPA is much faster and more secure so I really want to get this fixed I also believe the two problems are somehow related considering they both involve working for a few seconds to a few minutes then stalling and failing Could this be somekind of authentication or something to do with WPA WPA that I'm doing wrong Any help suggestions SOLUTIONS are very appreciated as this has been on my nerves like crazy Thank you
Hmmmm, Tough Problem.
One of the things it could be is a loose connection, and it keeps on dropping out. Try checking all of your Patch (Ethernet) Cables and reconnecting them all.
As you can copy the files on WEP, it seems like windows is preventing a so called 'Hacker' (You) from copying a 'Virus' (Files) onto the HD. Try to edit the security settings yourself, edit the sharing options in the HD's properties and that might fix it...
Sorry about the long wait.
I have been receiving this error message for the last two weeks while trying to transfer files from a network drive into my laptop. I have a 3TB WD My Book Live connected to my home network through a netgear DGN2000 router. I also use it to stream videos
to a smart tv.
I didn't have any problem ever since I connected it the first time. However, it has started showing up this error message now. I can't copy or move files either way. I tried a number of options, such as reset my router, shut down and reconnected the network
drive but none seem to have worked now. Now, I can't stream videos. Also, I am not able to upgrade the firmware of the network drive.
Any help please.
Do you have some anti-virus software installed and set to scan network drive, temporarily disable it, check if that is the cause.
I also suggest you update the firmware of your router.
Please alos share more information in event viewer with us as mentioned by ZigZag31343x
Meanwhile you can contact the support of My Book Live
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
does not control these sites and has not tested any software or information found on these sites.
TechNet Community Support
i got this error on a win 8.1 pro after a total transfered amount of ~41 MB :
Error 0x8007003B: An unexpected network error occurred.
- connection via sslvpn using a ntfs share on a dfs in a Domain network as letter-mapped share via gpo.
If i use map networkfolder without a letter, it will work fine also with large files with more than 80 MBThe symantec endpoint protection was turned of! Same error...
My links are not working in yahoo I get redirected Then I get a message quot DCOM Server Process Launcher has failed and NT Authority System needs to shut down your system quot I get one minute and then it shuts me down re exeC Program Files Internet Explorer iexplore exeC Documents and Settings / WIN32 Error DCOM Service Error Network Pat Desktop dds scr Pseudo HJT Report uStart Page hxxp m www yahoo com uInternet Settings ProxyOverride lt local gt uSearchURL Default hxxp search yahoo com search fr mcafee amp p sBHO Yahoo Toolbar Helper d -c f - efb- b - eca - c program files yahoo companion installs cpn yt dllBHO AcroIEHlprObj Class e f-c d - d -b d- b WIN32 Service Error / DCOM Network Error d be b - c program files adobe acrobat activex AcroIEHelper dllBHO Spybot-S amp D IE Protection - f - d - - d f - c progra spybot SDHelper dllBHO DriveLetterAccess ca d e- - cf- e - - c windows system dla DLASHX W DLLBHO Comcast Toolbar ceea e-c - - e b- b a f b - c program files comcasttb dtx dllBHO scriptproxy db d a - - e -b d- f c - c program files mcafee virusscan scriptsn dllBHO Google Toolbar Helper aa ed - dd- d - -cf f - c program files google googletoolbar dllBHO Google Toolbar Notifier BHO af de - d - -b fa-ce b ad d - c program files google googletoolbarnotifier swg dllBHO CBrowserHelperObject Object ca c - b - e-a -a c db f - c program files bae BAE dllTB Comcast Toolbar ceea e-c - - e b- b a f b - c program files comcasttb dtx dllTB amp Google c b - - d - b - a cd f - c program files google googletoolbar dllTB Yahoo Toolbar ef bd -c fb- d - f- d f - c program files yahoo companion installs cpn yt dllTB F F ECBE-D - B -B - A E F A - No FileEB Real com fe fa -d c- d - fa- c f afe - c windows system Shdocvw dlluRun OurPictures quot c program files ritzpix e-z print amp share OurPictures exe quot AutoStartuRun DellSupport quot c program files dellsupport DSAgnt exe quot startupuRun DellSupportCenter quot c program files dell support center bin sprtcmd exe quot P DellSupportCenteruRun agent exe c documents and settings pat application data pc agent exeuRun SpybotSD TeaTimer c program files spybot - search amp destroy TeaTimer exeuRun ctfmon exe c windows system ctfmon exemRun SoundMAXPnP c program files analog devices core smax pnp exemRun IgfxTray c windows system igfxtray exemRun HotKeysCmds c windows system hkcmd exemRun Persistence c windows system igfxpers exemRun DMXLauncher c program files dell media experience DMXLauncher exemRun RealTray c program files real realplayer RealPlay exe SYSTEMBOOTHIDEPLAYERmRun MMTray quot c program files musicmatch musicmatch jukebox mm tray exe quot mRun ISUSScheduler quot c program files common files installshield updateservice issch exe quot -startmRun DLA c windows system dla DLACTRLW EXEmRun DLCCCATS rundll c windows system spool drivers w x DLCCtime dll RunDLLEntry mRun dlccmon exe quot c program files dell photo aio printer dlccmon exe quot mRun tgcmd quot c program files support com bin tgcmd exe quot servermRun dscactivate quot c program files dell support center gs agent custom dsca exe quot mRun DellSupportCenter quot c program files dell support center bin sprtcmd exe quot P DellSupportCentermRun DACSMiniApp c program files fisher-price dacs miniapp DACSMiniApp exemRun QuickTime Task quot c program files quicktime qttask exe quot -atboottimemRun iTunesHelper quot c program files itunes iTunesHelper exe quot mRun McENUI c progra mcafee mhn McENUI exe hidemRun XoftSpySE quot c program files xoftspyse XoftSpySE exe quot -NM -hidesplashmRun djmncmbr c windows system config systemprofile local settings application data upjyob rdtnsysguard exemRun Corel Photo Downloader c program files corel corel photo album MediaDetect exemRun mcagent exe quot c program files mcafee com agent mcagent exe quot runkeymRun winupdate exe c windows system winupdate exedRun ygua e yhuiesfha yfauy fe c windows temp szyen exedRun asg jgkfmgasi ug jgkfgfb c windows temp nvsvc exedRun djmncmbr c windows syst... Read more
to the Bleeping Computer Malware Removal Forum, My name is Elise. I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------Please be patient and I'd be grateful if you would note the following:The cleaning process is not instant. DDS logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.In the meantime please, do NOT install any new programs or update anything unless told to do so while we are fixing your problem. I understand you can't log on to your computer at all. Please let me know exactly what happens, does it attempt to load your desktop and logs you off immediately afterwards?OK this file is big Print these instruction out so that you know what you are doingTwo programs to downloadFirst ISOBurner this will allow you to burn OTLPE ISO to a cd and make it bootable. Just install the program, from there on in it is fairly automatic. Instructions SecondDownload OTLPE.iso and burn to a CD using ISO Burner. NOTE: This file is 292Mb in size so it may take some time to download.When downloaded double click and this will then open ISOBurner to burn the file to CDReboot your system using the boot CD you just created.Note : If you do not know how to set your computer to boot from CD follow the steps hereYour system should now display a REATOGO-X-PE desktop.Double-click on the OTLPE icon.When asked "Do you wish to load the remote registry", select YesWhen asked "Do you wish to load remote user profile(s) for scanning", select YesEnsure the box "Automatically Load All Remaining Users" is checked and press OKOTL should now start. Change the following settingsChange Drivers to Non-MicrosoftPress Run Scan to start the scan.When finished, the file will be saved in drive C:\OTL.txtCopy this file to your USB drive if you do not have internet connection on this systemPlease post the contents of the OTL.txt file in your reply.http://www.bleepingcomputer.com/forums/t/291873/win32-service-error-dcom-network-error/
I have to computers on my home network. One laptop (dell) and one PC (custom build). I have XP home with SP2 and AVG 7.1 antivirus on both. I have run the network setup on both computers several times to no avail. They are connected through a linksys cable router.
The internet works fine on both and i can ping the computers from the other without a problem. When i try to connect via run->\\12.345.67.8 i get an error saying path not found. They are on the same workgroup, and windows firewall is off on both comuters
help please. I recently formated by PC and put all my music on the laptop and i want it back on the PC
ive got a d-link router that does the same thing. if you've got a crossover network cable, i suggest just connecting the two computers directly. gave up on home networking a while ago. good luck
When I plug in the ethernet cable (which works to get me online with my other laptop) I am unable to access the web and the reason is that the network did not assign a network id to the pc.
I went to start-run-cmd-ipconfig and it said that my ip address and sbnet mask were both 0.0.0.0. there was no value beside default gateway.
Help! It used to work.
A few questions.
What is your ISP and type of connection? DSL, cable, satellite, etc
What make/model modem?
What make/model router if you use one?
If your ISP is a cable company and you have a single port modem, they may be using MAC authentication of the device hooked to the modem. Since the MAC numbers of the laptops are different the modem will only work with one computer.
To use a second computer you would need to turn off tand disconnect the first computer, then turn off the modem and let it sit about 2 minutes to reset. Some newer modems have a battery backup and you would instead use the reset button on the back of the modem. After allowing the modem to reset connect the second computer and turn it on. You will need to do this every time you switch computers.
Just installed a new network card on hubbies computer It gets him on the internet OK but now I can t find him on our home network before adding the new card the reverse was the case We replaced the card because it kept dropping the driver so we figured it must be new on can't network Computer w/ be seen network card on its way out Problem we have is that HP has their card built into the motherboard in a little silver box that also contains the USB plugs sounds like the kind Computer w/ new network card can't be seen on network of crap Packard Bell used to pull making it impossible to do some upgrades We installed the card and at first it wouldn t connect at all the original Realtek kept connecting when the computer booted We then added the little WOL cable guess it s some sort of jumper cable Belkin includes - not always needed the instructions say Well after adding the cable the Realtek still boots on starting the machine but now he can get Computer w/ new network card can't be seen on network onto the internet with Computer w/ new network card can't be seen on network no trouble Tried disabling the Realtek but then nothing works Anyway around this so we can access his machine on our network There are a couple of programs that came with that machine I would like to have access to nbsp
Since it sees the network I would start off not worrying about anything else on the card as its obvious it is working.
First off I would do 2 things-
1) Go into the bios and disable the onboard ethernet controller. If its bad then really its just trying to use an onboard resource that by disabling it you can free up.
2) If the WOL part has a place to hook it to on the MB leave it in place but remember that 99.9% percent of the home users will NEVER use this functionality and that little cable won't ever come into play as being a problem component usually. This WOL (or Wake On LAN) is a way to remotely turn on the PC over a LAN and is usually for network administrators at large companies.
When you say you can't find his PC I am assuming you mean in network neighborhood right? If this is the case have you tried pinging from one PC to the other? Have you tried pinging by both machine name and IP? What are the results from doing that?
I m baffled here I had my network between my new vista machine MAINCOMPUTER and my xp laptop JIMSLAPTOP set up perfectly transfered old files from xp computer to vista without problems until yesterday when I was trying to add music files to windows media palyer on my xp machine that are stored on my vista machine It is wireless network with the vista machine connected via ethernet and xp machine wirelessly It was working fine at first- searching for and adding all of the files that it should have I left the room for a bit while the songs were being added and when I came back it was frozen I canceled out of it and then tried to access the files that were added but it could not find them I then tried to access the folder through the network and My Network Places crashed I restarted tried again same crashed I can see the xp laptop no problem on my vista network map can access any of the xp files and can ping using IP and name both ways- from vista to xp and from xp to vista XP just won t find maincomputer now in My Network Places- error message says quot Workgroup is not accessible You might not have permission to use this network resource Network name is no longer available quot Norton s is running on both machines but I have both computers on the network, XP on computer not computer can find Solved: problem just started Vista respective quot trust quot lists Again I had this working fine and this only started happening after the windows media player incident If anyone has any suggestions I d love to hear them Thanks in advance nbsp
Thanks in advance for the assistance My computer has become unbearably slow One of my servers was infected with a rootkit and when I started investigating this one I found a lot of things that seem risky Here are the logs DDS Ver - - - NTFSx Run by Michael Harris at on Internet Explorer BrowserJavaVersion Microsoft Windows XP Professional GMT - AV AVG Anti-Virus Free On-access scanning disabled Updated DDD - FF- network mal-ware other on detected on Very home computer computer, slow F- E B- D D BF AV McAfee VirusScan On-access scanning enabled Updated B EE - - CDE-A A-DD BA FAD FW Sygate Very slow computer, detected mal-ware on other computer on home network Personal Firewall enabled BE FE -CD B- - A - DB DDB Running Processes C WINDOWS system svchost -k DcomLaunchsvchost exeC Very slow computer, detected mal-ware on other computer on home network WINDOWS System svchost exe -k netsvcsC WINDOWS system svchost exe -k WudfServiceGroupsvchost exesvchost exeC WINDOWS system brss a exeC WINDOWS system spoolsv exesvchost exeC Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exeC PROGRA AVG AVG avgwdsvc exeC Program Files Bonjour mDNSResponder exesvchost exeC Program Files Belkin Bluetooth Software bin btwdins Very slow computer, detected mal-ware on other computer on home network exeC WINDOWS system cisvc exeC WINDOWS system EloSrvce exeC PROGRA AVG AVG avgrsx exeC Program Files FolderSize FolderSizeSvc exeC PROGRA AVG AVG avgnsx exeC Program Files Common Files Intuit Update Service IntuitUpdateService exeC Program Files Java jre bin jqs exeC WINDOWS system nvsvc exeC Program Files Macrium Reflect ReflectService exeC WINDOWS System svchost exe -k imgsvcC Program Files Common Files Ulead Systems DVD ULCDRSvr exeC PROGRA AVG AVG avgemc exeC WINDOWS Explorer EXEC Program Files AVG AVG avgcsrvx exeC WINDOWS system RUNDLL EXEC WINDOWS system rundll exeC WINDOWS system wuauclt exeC PROGRA AVG AVG avgtray exeC Program Files Visagesoft eXPert PDF vspdfprsrv exeC WINDOWS System svchost exe -k HTTPFilterC WINDOWS system rundll exeC Program Files iTunes iTunesHelper exeC WINDOWS Samsung PanelMgr ssmmgr exeC Program Files Java jre bin jusched exeC Program Files Common Files Adobe ARM AdobeARM exeC Program Files Microsoft ActiveSync WCESCOMM EXEC WINDOWS system ctfmon exeC Program Files Belkin Bluetooth Software BTTray exeC Program Files BUFFALO NASNAVI nassche exeC Program Files iPod bin iPodService exeC WINDOWS system cidaemon exeC WINDOWS system cidaemon exeC Program Files Mozilla Firefox firefox exeC WINDOWS system taskmgr exeC WINDOWS system wuauclt exeC Program Files AVG AVG avgui exeC Documents and Settings Michael Harris Desktop dds scr Pseudo HJT Report uStart Page hxxp www google com uSearch Page hxxp www google comuDefault Page URL hxxp www dellnet comuSearch Bar hxxp www google com ieuSearchMigratedDefaultURL hxxp www google com search q searchTerms amp sourceid ie amp rls com microsoft en-US amp ie utf amp oe utf uInternet Connection Wizard ShellNext iexploreuInternet Settings ProxyServer http localhost uSearchAssistant hxxp www google com ieuSearchURL Default hxxp www google com search q smSearchAssistant hxxp www google com ieuURLSearchHooks H - No FileuURLSearchHooks H - No FileuURLSearchHooks AVG Security Toolbar BHO a bc a - f - -aa - d c - c program files avg avg toolbar IEToolbar dllmURLSearchHooks AVG Security Toolbar BHO a bc a - f - -aa - d c - c program files avg avg toolbar IEToolbar dllBHO Adobe PDF Reader Link Helper e f-c d - d -b d- b d be b - c program files common files adobe acrobat activex AcroIEHelper dllBHO AVG Safe Search ca f - f e- b -a e- e e c c - c program files avg avg avgssie dllBHO SSVHelper Class bb-d f - c-b eb-d daf d d - c program files java jre bin ssv dllBHO E D - A- EC-A -BA D E E - No FileBHO Windows Live Sign-in Helper d - c - abf- ecc- c - c program files common files microsoft shared windows live WindowsLiveLogin dllBHO AVG Security Toolbar BHO a bc a - f - ... Read more
Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.If you have already posted a log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.We need to see some information about what is happening in your machine. Please perform the following scan:Please download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Push the button.Two reports will open, copy and paste them in a reply here:OTListIt.txt Will be openedExtra.txt Will be minimizedPlease download GMER from one of the following locations and save it to your desktop:Main MirrorThis version will download a randomly named file (Recommended)Zipped MirrorThis version will download a zip file you will need to extract first. If you use this mirror, please extract the zip file to your desktop.Disconnect from the Internet and close all running programs.Temporarily disable any real-time active protection so your security programs will not conflict with gmer's driver.Double-click on the randomly named GMER file (i.e. n7gmo46c.exe) and allow the gmer.sys driver to load if asked.Note: If you downloaded the zipped version, extract the file to its own folder such as C:\gmer and then double-click on gmer.exe.GMER will open to the Rootkit/Malware tab and perform an automatic quick scan when first run. (do not use the computer while the scan is in progress)If you receive a WARNING!!! about rootkit activity and are asked to fully scan your system...click NO.Now click the Scan button. If you see a rootkit warning window, click OK.When the scan is finished, click the Save... button to save the scan results to your Desktop. Save the file as gmer.log.Click the Copy button and paste the results into your next reply.Exit GMER and re-enable all active protection when done.-- If you encounter any problems, try running GMER in Safe Mode.-------------------------------------------------------------In the meantime please, do NOT install any new programs or update anything unless told to do so while we are fixing your problemIf you still need help, please include the following in your next replyA detailed description of your problemsA new OTL log (don't ... Read morehttp://www.bleepingcomputer.com/forums/t/334842/very-slow-computer-detected-mal-ware-on-other-computer-on-home-network/
Hi First post but I hope to be able to use this Forum to help get familiar with Windows Im used to Windows XP but my Old HP network single Desktop computer on to Work home computer? Compaq Desktop Computer finally died My Buddy gave me one of his Work Office computers that was on a Network system with other computers Im going to be using it for my home with internet access I'd like to change the administrator name and password along with deleting other user accounts but I seem to have problems doing so He gave me his original User name and password to be able to access the computer and clean things out Will I have a problem using this computer at home is it was setup for Work Desktop computer on network to single home computer? a network system I'd like to get it back to basics so I can utilize as much of the Hard drive as possible but I do not have the windows disk Im not much of a computer Wiz but I can do pretty well with guidance and or the proper links so please have patience with me Im also trying to figure out Windows paint on this computer so I can post pics
It would be best to re install windows on that pc.
What operating system is on it now ?
Does it have a COA sticker on it ?
Can you read the activation key on it ?
My computer was working and all of a sudden I can not longer connect to my network and when I see all available networks mine says "The settings saved on this computer for the network do not match the requirements of the network" How can I change the settings on the computer so that they match the requirements of the network? I can access other networks and get online like that, but my network, even the local one, is busted. Please help!
This issue usually occurs on wireless network connections. I suggest that you turn off any security feature of wireless. Please click Start->Control Panel, double-click Network Connections, right click on the wireless adapter and select Properties. From there choose Wireless Networks, click on your wireless network name and choose properties. Under Network Authentication choose Open to turn off the wireless security. Please try to connect.
If the issue persists, I suggest that you delete the connection, and recreate the wireless network connections. The following website may help you on creating the wireless connection.
Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Is the issue resolved?
If the issue persists, I suggest that you reinstall the wireless adapter driver, and re-create the connection again.
Remove the adapter driver========================
1. Click Start. In the Start Search box type "devmgmt.msc" and press Enter.2. Expand "Network Adapters", double-click on the entry of the wireless network device.3. Click the tab "Driver", click "Uninstall".4. Click Start. In the Start Search box type "appwiz.cpl" and press Enter. 5. Remove the entries related to the wireless network adapter.
Then reinstall the driver with your driver CD. After installing, re-create the connection.
If the issue is not resolve by the above suggestions, please let me know if other computers can connect to this wireless network.
I have the MS security I worked at a company for years they gave me laptops over that time I moved to a new place and the neighbors have managed to get into my network as the system are They network. admin. someone to as my entering from How entering on system/network stop computer(s)/devices admin Unfortunatly my job ended due to lack of projects and the How to stop someone from entering computer(s)/devices on my network. They are entering as system/network admin. company told me to keep the computers so I no longer have direct access to my actual system admin He set my profile to local on my computers I have admin rights but this person keeps going in and making changes to everything They even made it to where I could not access wifi and deleted my profile at one time I am not technical but I did a system restore to retrieve How to stop someone from entering computer(s)/devices on my network. They are entering as system/network admin. it I have looked everywhere and MS security does not How to stop someone from entering computer(s)/devices on my network. They are entering as system/network admin. see it as a threat so does nothing I would like to set myself as my own system network admin This person has deleted changed stuff on my childrens kindles because they are set up in my name I have been blocked from posting to facebook etc I have no idea what to do and really would like my privacy back I check event viewer and see that they mirror nbsp my recent activity and do all kinds of stuff with my security that I cant change They are very good at what they are able to achieve and I know so very little about IT I feel like David and Goliath only I forgot the stupid rock at homehttps://social.technet.microsoft.com/Forums/en-US/b8912243-b958-43bc-a4cd-b2ed41656ed1/how-to-stop-someone-from-entering-computersdevices-on-my-network-they-are-entering-as?forum=mata
Im running 2 64-bit Windows 7 computers. My host computer, which is my primary, I have connected to a second computer. I connected them using a standard ethernet cable and only my host has Internet connection. Can someone give me a brief step-by-step explanation on how to get both computers connected to the internet? I know this is probably very simple but I don't know how to correctly word it on google/youtube. o.o
Using ICS (Internet Connection Sharing)
I hope someone can help with a wireless router query I have a Netgear DG G wireless router It works fine but I seem to to query network connection computer ad hoc wireless computer have created a connection that I can t get rid of It s a device to device ad wireless ad hoc computer to computer network connection query hoc connection that I created by mistake and it broadcasts itself alongside the normal wireless connection I use for my laptop There are now two SSIDs being broadcast ABCnet is the one I want my laptop to see XYZnet is the ad hoc network wireless ad hoc computer to computer network connection query I want to get rid of I can t find any reference to it in Network Connections on the desktop that manages the router The router is broadcasting quot XYZnet quot as a computer-to-computer network through the SSID to my wireless laptop and other laptops in the area despite the fact that SSID is disabled I seem to recall a screen in the router set-up screen about ad hoc and infrastructure options but I can t find it I ve tried restoring the router to factory defaults but it s still there Please forgive my lack of technical knowledge - this is a black art to me Any suggestions Many thanks R nbsp
We are adding an XP computer to a peer to peer network with Vista machines. The Vista machines can see the XP machine in the network but when clicking to get to share files, message comes up Windows cannot access \\XPcomputer. The message adds that there may be a spelling error or that there may be a problem with the network. But the error message is the one listed in the subject of this email.
XP machine is properly set to share folders and there is no other visible proble. There is no message from the antivirus software so I am assuming the address is within the Antivirus acceptable range. Antivirus is Norton 360.
Any suggestions...very frustrating... thank you
The problem turned out to be in the Norton Antivirus on the XP machine. No need to mess with the NetBIOS in this case.
Thank you both for your assistance.
My husband and I have a home network set up with two laptops. His is a Dell Inspiron 8100 and mine is a Dell Inspiron XPS. I run Windows XP Pro and his runs Windows XP Home.
Router is a Lynksys WRT400N Simultaneous Dual-Band Wireless-N Router
Modem is a Motorola SB6120 SURFboard DOCSIS 3.0 eXtreme Broadband Cable Modem
We upgraded our modem & router a few months ago and haven't been able to get the 8100 to see the XPS, however the XPS can see the 8100. Before the upgrade both computers could communicate just fine and we were able to get into each others "My Documents" folders. I'm sure it's probably something simple, but have no idea how to fix this. We need to get it resolved quickly because we store all of our college documents on my computer, and my husband needs to be able to access them. Classes start on Tuesday! HELP!
i want to create a wireless network on my laptop so i can connect my psp to it to use the internet
the reason why i want to do this is because i am staying in uni halls atm and currently using there internet connection
i kno how to connect a psp to a wireless network so i dont need instructions on how to do that but i want to know how to create a wireless network on the laptop and make it act like a wireless router
Well, the classic way would be to use ICS (Internet Connection Sharing) on the laptop.
Hi One of my laptops is showing a strange connection in the wireless manager I use the windows default manager Firstly the laptop runs Windows XP In the available wireless trojan Computer-to-computer network horse? connection window there is a computer-to-computer network showing as trojan horse Computer-to-computer network trojan horse? virus and it states it is an on demand network This appears everywhere as in I was at my partners house when I first noticed it and it is still there when I looked at my house we live about miles apart I have attached a screen shot so you can see This doesn t Computer-to-computer network trojan horse? appear on my other laptops and on my partners my main laptop runs windows and my partners windows I Computer-to-computer network trojan horse? have run a full computer scan using AVG which did not show anything Any ideas anyone I would be grateful if anyone can help me this is concerning Thanks Loz lt a target blank title ImageShack - Image And Video Hosting href http imageshack us photo my-images dddgi jpg gt lt img src http img imageshack us img dddgi jpg border gt lt a gt lt br gt Uploaded with lt a target blank href http imageshack us gt ImageShack us lt a gt nbsp
That HTML code didn't work for the image sorry and I meant to click preview before clicking submit!
This link should have the image.
I've got a total of six computers on my network - running Windows and running XP With the exception of one XP network on access computer cannot computer Windows 7 One computer all of the machines see each other on the One XP computer on network cannot access Windows 7 computer network and can share files One XP machine does not see the shared folders of my new Win machine but does list it as a quot workgroup quot computer When I try to access the computer itself I am prompted for a password Passwords are turned off on the Win machine and none of the other computers on the network get prompted for passwords to access this computer I assumed that it was due to the setting on the Win machine but they are all set for sharing with everyone on the network Passwords are off Firewall is off as well The network name is consistent across all the machines I've been unable to find any information on why just one computer on the network would be prompted for a password to access another computer on the netwoek Any help would be great
Welcome to Seven Forums,
Option 1 - Verify that the password protected sharing is off from your new Windows 7 computer.
Disable Password Protected Sharing — MAXIMUMpcguides – Windows 7 tips, tricks, help, and how-to guides
Option 2 - Turn off the new Windows 7 computer, turn off the XP computer. Turn back on the new Windows 7 computer, wait until it's completely up and running then turn on the XP computer.
Please post an update.
Hey everyone I apologize if this is the wrong place to ask this question I just added a windows computer to our network All computer are either windows or windows nbsp This new computer is connected to the network via wifi all other computers are connected via Ethernet to a switch which then goes to the router We have one drive that is shared by all network this help on - computer? Added new computer new with our permissions to a the computers nbsp So far I've never had problems with permissions accessing files from any computer nbsp This new computer is connected to the network and I can see all the files nbsp I can drag and drop files from the share drive onto my computer But I can't do the reverse nbsp Added a new computer to our network - help with permissions on this new computer? I can't make any changes to any files I can't create new folders etc As far as I know the permissions were set so that anyone could do anything nbsp Perhaps I missed something Anyone have any ideas nbsp Could it be possible it is because Added a new computer to our network - help with permissions on this new computer? this computer is connected via wifi adapter I'll be around to provide more details Thankshttps://social.technet.microsoft.com/Forums/en-US/d524e24d-48c4-4137-9a38-527abed12cd9/added-a-new-computer-to-our-network-help-with-permissions-on-this-new-computer?forum=w7itpronetworking
Im running windows Computer or Hacked Computer Crashes Network bit home edition I LITERALLY Hacked Computer or Network Computer Crashes just reformatted my computer and shut it down last night and saw Hacked Computer or Network Computer Crashes error saying others are using this comp closing will kick them off I shutdown and rebooted and it took forever to boot up then crashed within minutes of use I just reformatted again and its still running slow I have not added anything but chrome I am not sure if my network is hacked as other computers I reforamtted are having the same issue Please help I have posted my FRST Log below and have attached the additional log Scan result of Farbar Recovery Scan Tool FRST x Version - - Ran by Will administrator on WILL-PC - - Running from C Users Will Downloads Loaded Profiles Will Available Profiles Will Platform Windows Home Premium X Language English United States Internet Explorer Version Default browser Chrome Boot Mode Normal Tutorial for Farbar Recovery Scan Tool http www geekstogo com forum topic -frst-tutorial-how-to-use-farbar-recovery-scan-tool Processes Whitelisted If an entry is included in the fixlist the process will be closed The file will not be moved AMD C Windows System atiesrxx exe IDT Inc C Windows System DriverStore FileRepository stwrt inf amd neutral ccf dd cb af stacsv exe AMD C Windows System atieclxx exe Andrea Electronics Corporation C Windows System DriverStore FileRepository stwrt inf amd neutral ccf dd cb af AESTSr exe LSI Corporation C Program Files LSI SoftModem agr svc exe Hewlett-Packard Company C Program Files x Common Files LightScribe LSSrvc exe Symantec Corporation C Program Files x Norton Internet Security Engine ccSvcHst exe C Program Files x CyberLink Shared files RichVideo exe Symantec Corporation C Program Files x NortonInstaller C C - F D- F -AAA - EF E NIS A E D InstStub exe Synaptics Incorporated C Program Files Synaptics SynTP SynTPEnh exe IDT Inc C Program Files IDT WDM sttray exe Sun Microsystems Inc C Program Files Java jre bin jusched exe Hewlett-Packard Company C Program Files x Common Files LightScribe LightScribeControlPanel exe Synaptics Incorporated C Program Files Synaptics SynTP SynTPHelper exe CyberLink Corp C Program Files x HP QuickPlay QPService exe Hewlett-Packard Development Company L P C Program Files x Hewlett-Packard HP Quick Launch Buttons QLBCTRL exe Advanced Micro Devices Inc C Program Files x ATI Technologies ATI ACE Core-Static MOM exe Sun Microsystems Inc C Program Files x Java jre bin jusched exe Hewlett-Packard C Program Files x HP HP Software Update hpwuschd exe Hewlett-Packard C Program Files x Hewlett-Packard HP Wireless Assistant HPWAMain exe Hewlett-Packard Development Company L P C Program Files x Hewlett-Packard Shared hpqWmiEx exe Hewlett-Packard Development Company L P C Program Files x Hewlett-Packard HP Quick Launch Buttons Com QLBEx exe Google Inc C Program Files x Google Chrome Application chrome exe Google Inc C Program Files x Google Chrome Application chrome exe ATI Technologies Inc C Program Files x ATI Technologies ATI ACE Core-Static CCC exe C Program Files x Hewlett-Packard Shared HpqToaster exe Hewlett-Packard C Program Files x Hewlett-Packard HP Health Check HPHC Service exe Google Inc C Program Files x Google Chrome Application chrome exe Registry Whitelisted If an entry is included in the fixlist the registry item will be restored to default or removed The file will not be moved HKLM Run SynTPEnh gt C Program Files Synaptics SynTP SynTPEnh exe - - Synaptics Incorporated HKLM Run SysTrayApp gt C Program Files IDT WDM sttray exe - - IDT Inc HKLM Run SunJavaUpdateSched gt C Program Files Java jre bin jusched exe - - Sun Microsystems Inc HKLM-x Run StartCCC gt C Program Files x ATI Technologies ATI ACE Core-Static CLIStart exe - - Advanced Micro Devices Inc HKLM-x Run QPService gt C Program Files x HP QuickPlay QPService exe - - CyberLink Corp HKLM-x Run QlbCtrl exe gt C Program Files x Hewlett-Pack... Read more
Hello youngwill and welcome to Bleeping Computer.
My name is Satchfan and I would be glad to help you with your computer problem.Please read the following guidelines which will help to make cleaning your machine easier:
please follow all instructions in the order posted
please continue to review my answers until I tell you your machine appears to be clear. Absence of symptoms does not mean that everything is clear
all logs/reports, etc. must be posted in Notepad. Please ensure that word wrap is unchecked. In Notepad click Format, uncheck Word wrap if it is checked
if you don't understand something, please don't hesitate to ask for clarification before proceeding
the fixes are specific to your problem and should only be used for this issue on this machine.
please reply within 3 days. If you do not reply within this period I will post a reminder but topics with no reply in 4 days will be closed!
Please DO NOT install/uninstall any programs unless asked to.
Please DO NOT run any scans other than those requested
===================================================Note: Please carry out these instructions in the order given.
===================================================Reset the Router
Let’s try to reset the router to its default configuration.
this can be done by inserting something tiny like a paper clip end or pencil tip into a small hole labelled "reset" located on the back of the router.
press and hold down the small button inside until the lights on the front of the router blink off and then on again (usually about 10 seconds).
if you don’t know the router's default password, you can look it up. here
you also need to reconfigure any security settings you had in place prior to the reset.
you may also need to consult with your Internet service provider to find out which DNS servers your network should be using.
Note: After resetting your router, it is important to set a non-default password, and if possible, username, on the router. This will assist in eliminating the possibility of the router being hijacked again.Flush the DNS
Now lets flush the DNS on the computer:
hold down your Windows key and press R
a “run” window will appear
type in cmd and press Enter
a black window will open
please enter the following text into that window and then press Enter:
Note There is a space after “ipconfig” and before the forward slash.
===================================================Download and run AdwCleaner
Download AdwCleaner from here and save it to your desktop.
when it has finished, select Clean
if it asks to reboot, allow the reboot
on reboot a log will be produced; please attach the content of the log to your next reply.
===================================================Download and run Junkware Removal Tool Please download Junkware Removal Tool to your desktop.
shut down your protection software now to avoid potential conflicts.
run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator"
the tool will open and start scanning your system
please be patient as this can take a while to complete depending on your system's specifications
on completion, a log (JRT.txt) is saved to your desktop and will automatically open
post the contents of JRT.txt into your next message.
===================================================Run Farbar Recovery Scan Tool
Please run FRST again and post the new log plus the Addition.txt log which was also produced with the first run of FRST.Logs to include with next post:AdwCleaner log
On my Windows 7 laptop, I have created a wireless ad hoc (computer-to-computer) network, but I couldn't detect it from my Windows 8.1 phone. I created another one on my friend's laptop, but neither myself, her nor another friend of us
were able to detect it from their Android phones and my Windows phone.
How can I get it working successfully?
Additional info: I haven't received any error on both laptops. I have admin rights. I'm connected to the internet wire. WLAN AutoConfig service is automatic and started.
Hi Seaoar ,
We may misunderstand the ad-hoc feature ,it only supports the computer to computer .Here is a link for reference :
Set up a computer-to-computer (ad hoc) network
To create a wifi and connect the phone ,we may need to take the steps according to the link I have posted in my third answer.It is used to create a virtual WiFi Miniport Adapter .
MeipoXu, I appreciate your concern and let me correct you.
In the 1st link it says "An ad hoc network is a temporary connection between computers and devices used for a specific purpose". So it should not be only computers. Plus Iphone connects to it why not Windows phone?
2nd, why do you insist to post me a line about Android? I only tried connecting my friends' Android devices for tesing purposes. My own phone is Windows.
3rd I found a way to create a connection from cmd and it worked successfully without any problem. here is the command:
netsh wlan set hostednetwork mode=allow ssid=<network name> key=<passkey>
netsh wlan start hostednetwork
netsh wlan stop hostednetwork
I hope other will benefit from my discovery.
Problem resolves, restarting server or user comp with this problem. But Net view "ip of my server", show acess denied, error 5, still remains. I want to fix this error at all.https://social.technet.microsoft.com/Forums/en-US/2a681979-f66d-419b-9980-ced3f8638152/sometime-i-cant-enter-in-network-neighborhood-with-error-0x80070035-net-view-quotip-of-my?forum=w8itpronetworking
About 1 week ago. I was playing an mmo, but then I got this message on my screen (network error), it became more frequent so I used game booster to see if it will stop the problem. It did not. So I tried searching my problem on google chrome and ie 8 and got another message error 105: the server could not be found and now every time I use either browser the speed is irritably slow with a few pauses in between until error 105 pops up. I checked my sisters pc and hers is fine, it is not even connected to any network and reliably fast with the exception of no graphic cards 3.0 or higher installed. Hers is a win7 32 bit while mine is a win7 64 bit. So then I saw tech support forums on a google search and signed up hoping this could help me with my dilemma and any others I might come across.
Are you connected wireless or by Ethernet cable? Are you going through a router or directly to the modem? Try restarting everything (Modem, Router, Computer) if through a cable, use a different one. Try speedtest to test your internet speed.
I have had my vista pc and my windows basic net book setup to message: "Error network code: file No help error shareing 0x80070035". let me share files through network error message: "Error code: 0x80070035". No file shareing help an Netgear DG PN Route for around months with no problems However as of days ago I can no longer do this and non of the network tools can fined or solve the problem I can uses the internet though my rooter see my vista pc on the network as well as the media streaming windows one thing I can also access my net book hard drive from my pc no problem and transfer delete files as well When I do try to connect the following error message is given quot Error code x The network path was not found quot How can I fix this P s I know windows basic has not create home group ability but it worked with the one I made on vista I can not afford to upgrade my copy of windows so that is totally out of the question P p s I am a dummy at this stuff I have tried Enable NetBIOS over TCP IP no joy
Welcome to SF,
Firewall might be the problem, you'll have to configure it to allow access to "trusted zone".
On some Firewalls or Security Software you might need to completely uninstall them.
First let me say that I'm horrible with computers. I'm just very CPU ignorant.
That being said here's my problem:
My Dell inspiron mini will show my network and show that it has excellent signal strength. But then it also says limited or no connectivity.
It also gives me this:
network did not assign a network address to the computer
Don't know what to do. I've already tried this:
Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log
Reset WINSOCK entries to installation defaults, type: netsh winsock
None of that worked. What is my next step to fixing my problem?
Thanks a heap
My Windows XP laptop was connected to the internet via erthernet cable to a Linksky modem (I've been using my grandparent's internet). Up until a week ago, that's worked fine. But suddenly it's stopped working, and whenever I try to connect I get this:
"Limited or no connectivity
You might not be able to access the internet or some network resources. This problem occured because the network did not assign a network address to he computer."
Could anyone please help me?
ETA: I am completely illiterate when it comes to computers, so details might be necessary. Thanks!
What non-Windows firewall or security suite do you have?
Try the following repairs first ...
(From a JohnWill post)
TCP/IP stack repair options for use with Windows XP with SP2 or SP3.
Start, Run, CMD, OK to open a command prompt.
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog
Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log
Reboot the machine.
My sis's computer connects to the Internet via the phone line. Dial-up. Just a few days ago she started getting an error. She clicks on her internet provider icon, it shows that it dials in and connects via her password, etc. It does not bring up the browser however but just a small piece at the top to connect to email or web etc. When we try to click onto one of those it pops up with an error that a network cable is unplugged and closes the connection. Only then it freezes the connection and we have to reboot. If you use dial-up you don't have a network connection do you? She has a Compaq computer with Windows XP and uses netzero internet. Thank you
can you try to disable the local area connection..
go to start>control panel>make sure its in classic view(can be found on the upper left hand side.)>network connection>local area connection>right click>disable.
then reboot the PC and try to connect again. see what happens.
I had a network set up when all my computers were XP's. When I got a vista computer, I am unable to network this one with the XP's. Is there some link that I can go to to see what needs to be done. I have gotten different answer from so called experts. Some say that it can not be done and others say it can.
I can not find any computer in my network from mine.
We turned on my son laptop and mine, we synchronize time and everything. Since his computer he can see my computer.
He has windows vista and i have windows 7.
I don't know what to do.
Troubleshooting says is a network-related issue. I don't get it...
Someone could help?
Quote: Originally Posted by karibe
I can not find any computer in my network from mine.
We turned on my son laptop and mine, we synchronize time and everything. Since his computer he can see my computer.
He has windows vista and i have windows 7.
I don't know what to do.
Troubleshooting says is a network-related issue. I don't get it...
Someone could help?
Could be firewall, av, or other settings can we get your system specs and network setup?
this is probably a stupid question, but I have two PCs in my home connected by wireless router (Dlink 524) from a cable modem. Both running XP home, occasionally at the networked PC(does not have the router), when I look at the available networks, I see my secured network but also sometimes see one called default and says unsecured computer to computer network. Is this a normal thing to see? It worries me b/c it says unsecured. It also shows the same signal strength which makes me think its also related to my wireless network.
I am using a Dell Latitude Model D630 with Windows XP.
I am trying to set up a Wireless Computer-To-Computer (ad hoc Network) and have a problem in doing so.
In setting this up I:
1. Go to Network Connections
2. Right Click on Wireless Network
3. Click on Properties
4. At the top of the next screen it has two tabs: "General" and "Advanced"
5. The Problem I have is that there should also be a tab that says: "Network Connections" but this tab is missing.
Any assistance would be appreciated including if anyone has a link to clear step by step instructions on how to set up a wireless computer-to-computer ad hoc network.
On mine it says 'General' 'Wireless Networks' and 'Advanced', could Wireless Networks be the correct one and a mis-type on your instructions?http://www.bleepingcomputer.com/forums/t/340927/wireless-computer-to-computer-ad-hoc-network/
How do I network a vista computer to an XP computer using hard wired router?
Dear friends i am Query about network ad hoc computer computer to trying to setup an ad hoc network between my two laptops one running windows xp sp and another running windows I am trying to share my internet connection running through a dongle I have been successful in doing this but my query is that is it necessary to have the second pc trying to connect to the ad hoc network in order to get both the machines Query about ad hoc computer to computer network connected to the network What i have noticed is that if i Query about ad hoc computer to computer network try to connect the host alone to the ad hoc network it gives up trying after some time and shows the pc as not connected I have recently formatted my host pc and before doing that i remember that a few months back i was able to get the host alone connected to the network without any other device requesting to connect Also at that time i did not had to configure the client ip address this time around i had to do that Also this time on my host computer in the internet sharing settings i had to select http requests to allow the client to share http requests I had never done that before I have always used windows to configure wireless networks instead of broadcom utility My host is around year old and in the beginning it was using broadcom utility for wireless networks which i had stopped using before the first time i had set up an ad hoc network so my doubt is that may be the broadcom utility had already over ridden some system settings due to which i could get host alone to connect to ad hoc network although i was not using the broadcom utility to set up the network Please throw some light nbsp
Ok friends, just forget my previous post, it doesn't matter as long as the network works fine.
Just one more problem, my host is on windows xp sp3 and my client is on windows 7, the problem is that if i enable WEP security for the ad hoc network, the client is unable to share the internet. If i disable it, the client is able to access internet. What could be the problem?
PCs are Win Ultimate All are joined to the Domain Domain Controller DNS DHCP Server on same instance is Server standard The network topology is like this Router as Internet Gateway gt Switch identifying Cards will only or intermittently, Inside the Domain-Joined no Network when network Connections will Network longer, Network join Domain PC from gt Wired to Server and PC's SIP phones and Wireless Access Point Domain-Joined PC Network Cards will no longer, or will only intermittently, join the Domain Network when identifying Network Connections from Inside network all on same subnet DNS and DHCP have been offloaded Domain-Joined PC Network Cards will no longer, or will only intermittently, join the Domain Network when identifying Network Connections from Inside network to Server Roles and switched off on the router All of the PCs have network cards that have joined the domain network at least some of the time since I set them up Some of them have always picked up the domain network and continue to this day Some of them intermittently pick up the domain network and other times join whatever other unmanaged network is available Some of them have stopped picking up the domain network altogether and will no matter how many times their NICs are restarted always join a non-domain unmanaged network When the NICs are not joining the domain they are unable to ping hostnames of any devices on the network but nslookup of the hostnames usually works The DC DNS DHCP server's IP can be pinged without issue ipv or ipv I am recording DNS Client Errors ID on all of the PCs during the intervals when their NICs are identifying which network to join -On the PCs that are catching the domain network I am only getting a single error about the root domain eg the domain is ad domain com and I am only getting errors about how the configured DNS servers cannot resolve domain com nothing with fully qualified domain names eg server ad domain com -On the PCs that are not catching the domain network I get a few different instances of the same error substituted quot domain quot for my root domain name Name resolution for the name WPAD ad domain com timed out after none of the configured DNS servers responded Name resolution for the name lt DC-DNS-DHCPSERVERNAME gt ad domain com timed out after none of the configured DNS servers responded Name resolution for the name LDAP TCP DC MSDCS ad domain com timed out after none of the configured DNS servers responded Name resolution for the name ISATAP ad domain com timed out after none of the configured DNS servers responded Based on what I've read about NLA service choosing the domain to log into I believe this rd error is the big one although I guess the big error is that my configured DNS servers are not responding except to NSLookups From what I understand the Network Location Awareness Service Provider will roughly do the following look into the registry to see if there is an entry for a domain network to join and if there is it will attempt to contact the domain controller of the same domain name If it is successful with both parts it will join the domain network named quot ad domain com quot If not it will fall back to one of the other options ie home private public quot whatever its called network quot I have tried many of the fixes presented for similar issues but I haven't found anything that's worked A few things I have tried while cycling my NICs on and off to test -turned off the firewall nbsp -poked holes in the firewall for TCP UDP port -poked holes in the firewall for TCP UDP port -ipconfig flushdns ipconfig registerdns -netsh int ip reset -netsh reset Winsock catalog and restarted -route f and restarted -turned off DHCP Client Service -restarted DHCP client Service -turned off IPV on NICs -hard-coded DNS servers IPV and -hard-coded static IPs and DNS Servers only IPV -sfc scannow to scan for integrity violations All of these and also some combinations of these and more that I can't remember One more p... Read morehttps://social.technet.microsoft.com/Forums/en-US/303bcde4-6a0b-4bc4-baff-929f0b6b4261/domainjoined-pc-network-cards-will-no-longer-or-will-only-intermittently-join-the-domain-network?forum=w7itpronetworking
Well I built this computer in september of everything was running great no problems at all until today I left it on and went between Custom 1077... computer. error BSOD. or 0 unknown error built to the store came back and BSOD My computer restarted before I could write down any information quot Error code quot system restore said it was BSOD. error Custom built computer. error unknown between 0 or 1077... a quot unknown error quot which terminated my system My Computer is running fine but I would like to make sure nothing is wrong I'm thinking it may be my mother board because one of the SATA slots is broken and I had to switch to another one System specs Cpu Core i k OS windows vista home premuim bit Motherboard Asrock p extreme Memory gb Corsair vengence quot will increase to as well quot Harddrive TB Graphics card GT quot will upgrade when BSOD is solved quot If you need anymore information I have the app on my phone and should be able to response quickly The resource and Performance monitor file says I have no Anti-virus program but I do Also says the only thing that failed was system service checks - abnormally terminated service check
Here is the Full resourse and performance filehttp://www.sevenforums.com/bsod-help-support/210705-bsod-error-custom-built-computer-error-unknown-between-0-1077-a.html
Hi My computer keeps shutting down A system Error System computer error shutting down code:1073741819 error box appears and sys theres been a fatal error and that the computer will shut down in min At first the computer didnt actually shut down but slowed so you couldn t do anything but now it shutsdown and I System Error shutting down computer error code:1073741819 can barely open a single window before it goes off The error code is included i nthe system error box Any help would be greatly appreiciated Thanks Sarah Logfile of Trend Micro HijackThis v Scan saved at on Platform Windows XP SP WinNT MSIE Internet Explorer v SP Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system Ati evxx exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system svchost exe C WINDOWS system spoolsv exe C WINDOWS system Ati evxx exe C WINDOWS Explorer EXE C Program Files HPQ IAM bin asghost exe C Program Files Analog Devices Core smax pnp exe C Program Files ATI Technologies ATI ACE CLIStart exe C Program Files HPQ HP ProtectTools Security Manager PTHOSTTR EXE C Program Files Synaptics SynTP SynTPEnh exe C Program Files hpq HP Wireless Assistant HP Wireless Assistant exe C WINDOWS System svchost exe C WINDOWS system IFXSPMGT exe C WINDOWS system IFXTCS exe C Program Files Common Files LightScribe LSSrvc exe C Program Files ProtectTools Embedded Security Software PSDsrvc EXE C WINDOWS system HPZipm exe C Program Files Hewlett-Packard Shared hpqwmiex exe C WINDOWS system mqsvc exe C Program Files Trend Micro HijackThis HijackThis exe C WINDOWS system mqtgsvc exe C Program Files Internet Explorer IEXPLORE EXE C Program Files ProtectTools Embedded Security Software PSDrt exe C WINDOWS system wscntfy exe C PROGRA HPQ Shared HPQTOA EXE R - HKCU Software Microsoft Internet Explorer Main Start Page www google com R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - URLSearchHook Yahoo Toolbar - EF BD -C FB- D - F- D F - no file O - HKLM Run SoundMAXPnP C Program Files Analog Devices Core smax pnp exe O - HKLM Run ATICCC quot C Program Files ATI Technologies ATI ACE CLIStart exe quot O - HKLM Run PTHOSTTR C Program Files HPQ HP ProtectTools Security Manager PTHOSTTR EXE Start O - HKLM Run SynTPEnh C Program Files Synaptics SynTP SynTPEnh exe O - HKLM Run hpWirelessAssistant C Program Files hpq HP Wireless Assistant HP Wireless Assistant exe O - HKLM Run Cpqset C Program Files Hewlett-Packard Default Settings cpqset exe O - HKLM Run UserFaultCheck systemroot system dumprep -u O - HKUS S- - - Run CTFMON EXE C WINDOWS system CTFMON EXE User SYSTEM O - HKUS DEFAULT Run CTFMON EXE C WINDOWS system CTFMON EXE User Default user O - Extra context menu item E amp xport to Microsoft Excel - res C PROGRA MICROS Office EXCEL EXE O - Extra button no name - B E C - FCB- CF-AAA - C - C Program Files Java jre bin ssv dll O - Extra Tools menuitem Sun Java Console - B E C - FCB- CF-AAA - C - C Program Files Java jre bin ssv dll O - Extra button Create Mobile Favorite - EAF BB - F- D - - C FAE D F - C PROGRA MICROS INetRepl dll O - Extra button no name - EAF BB - F- D - - C FAE D F - C PROGRA MICROS INetRepl dll O - Extra Tools menuitem Create Mobile Favorite - EAF BB - F- D - - C FAE D F - C PROGRA MICROS INetRepl dll O - Extra button no name - DFB A - F - C -A - CAB FD A - C Program Files Spybot - Search amp Destroy SDHelper dll O - Extra Tools menuitem Spybot - Search amp amp Destroy Configuration - DFB A - F - C -A - CAB FD A - C Program Files Spybot - Search amp Destroy SDHelper dll O - Extra button Messenger - FB F -F - d -BB E- C F - C Program Files Messenger msmsgs exe O - Extra To... Read morehttps://forums.techguy.org/threads/system-error-shutting-down-computer-error-code-1073741819.856042/
We are facing issue in domain machines as group policy is not updating. after rejoin the domain it's working perfectly.
Below are the event IDs : 7320, 7007, 7326, 1017, 7016
local administrator is able to update group policy properly but non of domain user able to update grou policy properly.
below is the error.
Last Process Time
Group Policy Infrastructure Success 8/20/2015 1:58:15 PM
Folder Redirection Pending 8/20/2015 1:58:05 PM
Folder Redirection did not complete policy processing because the user needs to log on again for the settings to be applied. Group Policy will attempt to apply the settings at the user's next logon.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 8/20/2015 1:58:04 PM and 8/20/2015 1:58:05 PM.
Thanks, dashrath Chate 9763107923
Recently I restored my computer to windows 7 after using Windows 8 for a short period of time provided by my university. I don't think the story as to why I went back is very necessary so I'll skip it and get onto my problem.
Upon returning to Win7, I began to get some errors, namely my computer would BSOD every time that it went to "sleep". Additionally, on boot-up, the bios would give me the option to boot in Win8.1, even though I had removed it.
I'm trying to solve the BSOD issue, however I think that the two are related. I have attached the minidump folders and sysinfo in a .zip. I was trying to resolve this on my own - however my understanding of hardware and software is obviously not advanced enough to do so.
The zip you uploaded does not contain any crash dump.
Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.
Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.
Dont run any disc cleanup program before you upload another zip.
What is wrong whit my Windows Vista?
I use a Toshiba Satelite L300
Hi please can you translate the info to english to allow someone here to try to helphttp://www.techsupportforum.com/forums/f217/network-error-501140.html
I have a desktop and a laptop,both running windows 7 pro.i created a homegroup,with the exact same homegroup name.i shared the folders i wanted to see on the desktop and the same on the laptop,i can see the folders,but when i try to access them from both computers,i get the same error...
windows cannot access\\XXXX\users\XXXX-check the spelling of the name.otherwisethere might be a problem with your network.
i checked the spelling and everything seems to be spelled correctly.not sure where to go from here.
What antivirus software are you using?http://www.sevenforums.com/network-sharing/122986-network-error-please-help.html
When I go to a site and log on to listen to a sports game it goes to Windows Media Player. It says connecting to media... stays on for a little while then says Network error.
There is no number for the error. We have been able to get this before but have had some computer problems that might have caused the error. Can you suggest anything. I have tried going to the Microsoft page and tried all of that.
I have a 2 computers on a network without any router , both running windows xp and both connected by the normal networking cable (dont know the name).I can share files from the laptop but when i try to share from the desktop pc it always says
"An error occured while sharing ... The server service has not started .The shared resource was not created at this time "Please help im very new to networking
The server service fails to start for some reason. Go to Administrative Tools->Services and try to start the server service manually. If it fails, read the error messages and also look in the Event Viewer.
If anyone could help it would be greatly appreciated. Recently my computer has been freezing up; i can't do anything, i have to turn the computer off then back on. When it comes back on it says "resource conflict Error PCI network controller in slot 4" Also my internet keeps going out, but then comes back on. I've searched and destroyed all viruses but it still freezes. PLease help, this is really becoming annoying. Also my montior turned to a green haze, still worked, but I got headaches from looking at it, i dont' know if this could have something to do with it as well...thanks for your help
swap the card into another slot,if you don't have one free swap it with another one
as for the monitor it probably has a dry joint on one of the guns and needs resoldering,it is usually more economical to replace unless you have a friend who is a tv tech
for the freezing,get a can of air and blow the dust out of the computer especially from the fans and heatsinks
when i enter one website address it shown as network error (tcp Error) web : www.dishtv.in
i am working UAE.
many computer i checked all same result
hello again friends ! network error plagues me again this time it is, connect(): an attempt was made to access a socket in a wayforbiddenby it's access permissions winsock description:winsock 2.0 winsock stat running gift is not!
any help from you whiz kid woul be well and truly appreciated!Cheers!
I'm working with an Compaq/HP Microsoft notebook running a Windows Vista 32-bit operating system.
I've been getting a wireless Internet connection via a wireless range expander. For some odd reason, Vista will NOT CONNECT to the actual router, but it will connect through the expander.
I replaced the expander a couple of days ago, and my computer will not connect to it any better than it did to the actual router. I have all my IP and Network settings set to automatic, but something will not let Windows connect.
I have Linux installed on a separate partition on my hard drive, and Linux will connect just fine, so it's definitely a Windows issue.
Does anyone know what my problem is, or more importantly, how to fix it?
Thread moved to better assist you.http://www.techsupportforum.com/forums/f31/network-error-624629.html
here we go Logfile of HijackThis v Scan saved at on Platform Windows XP SP WinNT MSIE Internet Explorer v SP Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system Ati evxx exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system spoolsv exe C WINDOWS system Ati evxx exe C WINDOWS Explorer EXE D Program Files Kaspersky Lab Kaspersky Anti-Virus avp exe C WINDOWS system svchost exe D Program Files Kaspersky Lab Kaspersky Anti-Virus avp exe C WINDOWS system ctfmon exe D Program Files Winamp winamp exe C WINDOWS system dwwin exe C WINDOWS system dwwin exe C WINDOWS system dwwin exe D Program Files Opera Opera exe D Program Files WinRAR WinRAR exe D DOCUME JENDA LUD LOCALS Temp Rar EX HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Start Page http www seznam cz R - HKCU error network Software Microsoft Internet Connection Wizard ShellNext http windowsupdate microsoft com R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName Odkazy O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - D Program Files Adobe Acrobat ActiveX AcroIEHelper dll O - HKLM Run KernelFaultCheck systemroot system dumprep -k O - HKLM Run kav quot D Program Files Kaspersky Lab Kaspersky Anti-Virus avp exe quot O - HKCU Run ctfmon exe C WINDOWS system ctfmon exe O network error - Extra button no name - B E C - FCB- CF-AAA - C - D Program Files Java jre bin npjpi dll O - Extra Tools menuitem Sun Java Console - B E C - FCB- CF-AAA - C - D Program Files Java jre bin npjpi dll O - DPF B-B - D-A D -FCFDF E C WUWebControl Class - http v windowsupdate microsoft c ls en x client wuweb site cab O - HKLM System CCS Services Tcpip FF FD- DE - CB-AB F-C E D F NameServer O - Winlogon Notify Applets - C WINDOWS O - Winlogon Notify klogon - C WINDOWS system klogon dll O - Winlogon Notify MS-DOS Emulation - C WINDOWS O - Service Ati HotKey Poller - ATI Technologies Inc - C WINDOWS system Ati evxx exe O - Service ATI Smart - Unknown owner - C WINDOWS system ati sgag exe O - Service Kaspersky Anti-Virus AVP - Unknown owner - D Program Files Kaspersky Lab Kaspersky Anti-Virus avp exe quot -r file missing O - Service InstallDriver Table Manager IDriverT - Macrovision Corporation - C Program Files Common Files InstallShield Driver Intel IDriverT exe O - Service ISC BIND named - Unknown owner - C WINDOWS system dns bin named exe the thing is that after some time - mins of surfing i get popup error from svchost exe exception xc on address x a c with two buttons ok and cancel when i press one of the buttons network connection hangs and im not able to recieve anything from internet i can normaly surf when i ignore the message i e dont press any of the buttons and drag the window out of the screen recently i have scanned system with ad-aware and spybot wich cleaned all found problems but above one described still remains im not realy sure when that started to apearing can anyone give me a hint how to get rid of it i wouldn like to reinstall whole os thanks douuble nbsp
" The Client could not connect to the remote computer. Remote connections might not be enabled or the computer might be too busy to accept new connections. It is also possible that network problems are preventing your connection. Please try your connection again later. If the problem continues to occur, contact your administrator ".
Trying to connect from DC (Server 03) to the XP client and the above error is not allowing me to remote access using remote assistance (messenger service ) / Remote Desktop Connection as well as not able to access network resources .
Please advice me to solve this error
Hello, and welcome to the forum. Some suggestions here:
there was a problem about the network.
when I'm trying to open one of my computer in work group, there's a notice appearing.
(no more connection can be made to this remote computer at this time because there are already as many connection as the computer can accept.
plsss help me
Are you trying to Remote Desktop into this other computer? If not, what protocol are you trying to use?
What operating system is installed on all computers involved?
I have a problem with network sharing when I want to go to folders of shared computer
I got error 'Windows cannot access \\computer_name'
"Check the spelling of the name.Otherwise there might be problem with your network.To try to identify and resolve network problems click diagnose."
error code: 0x80070035
I tried solve it with creating homegroup but nothing.
How do I fix this?
Please if you know the answer tell me how to do it step by step.
What OS's and firewall's are you using ?http://www.sevenforums.com/network-sharing/144120-network-error.html
I set up a local wireless network and can't seem to see any user files on this particular server. (This is the main server that has the modem directly connected in it.)
I can't also seem to access laptops' files, as the error attached comes up. On the contrary, laptops can access all user files, except the particular server one's.
Can anyone help?http://www.vistax64.com/network-sharing/204023-network-error.html