Windows Support Forum

Asus joins the FreeSync market with 1440p, 144 Hz IPS display

Q: Asus joins the FreeSync market with 1440p, 144 Hz IPS display

Up until this point, Asus has been solely focused on producing G-Sync monitors for the gamers out there with Nvidia graphics cards. However this is set to change, with the company preparing to release their first FreeSync monitor, the MG279Q. ...

Read more

Relevancy 100%
Preferred Solution: Asus joins the FreeSync market with 1440p, 144 Hz IPS display

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: Asus joins the FreeSync market with 1440p, 144 Hz IPS display

Finally a good IPS monitor. I got tired of seeing so many TN ones.
Relevancy 70.09%

Acer announced two new gaming-grade 27-inch monitors at the Consumer Electronics Show last month. The XB270HU garnered the most media attention thanks to its IPS panel and Nvidia G-Sync technology. What Acer neglected to mention at the time, however, was...

Read more

A:Acer's 27-inch XG270HU display will ship with FreeSync support

Those bezels are awesome! I wonder how much it'll go for though...
Relevancy 51.17%

What is the freesync range of the  HP Envy 32 B&O monitor?

A:Freesync range of HP Envy 32 B&O

I am intersted in FreeSync range of this monitor too. Does anybody knows? I can't find it anywhere
Relevancy 51.17%

I use a full hd 27 inch monitor but I fancy something a little sharper. Is 4K worth it for office and web browsing or would the 1440P be more suitable? I would be limited to 27-28 size. An IPS panel or equivalent would help the sharpness.

A:1440P or 4K

I'm on a Samsung U28D590D. 28", UHD (3840 X 2180). It's only TN, but it was a relatively cheap monitor that does 60 Hz. I'm not sure that an IPS or one of the other technologies would be sharper. Better uniformity and wider viewing angles, probably.

I like the extra real estate. Some applications (like Photoshop CS6) don't scale well: the icons are well defined but tiny. It's good fro web browsing, but dual monitors might be better for office applications.
Relevancy 50.74%

Is it available on this laptop? AMD website states the FX processor as being dual graphics capable, yet i can find no driver package that enables CROSSFIRE. GPU-Z states "Crossfire Available" but is disabled. What gives? I purchased this laptop for this reason. Is this a windows 10 issue, the AMD website under features states windows 7/8 but does not list windows 10. Also, BOTH the r7 and m385x list freesync on the amd website but i can find no driver package to turn this feature on. Please assist.

A:y700 15acz Crossfire/Freesync

I jave the exavt same laptop, and I have yet to determine how to enable it, though not for lack of trying. If you downlaod a program called "GPU Z" is has a section that says "Crossfire Available (Disabled)" so it seems it CAN run it. Though additionally, in the new AMD crimson app, under Radeon settings, it shows that the graphics drivers are linked.  Crossfire may not be available as a feature per se, but maybe it's doing it naitvely anyway? After all, a AM running Phantom Pain on high with very minimal stuttering and barely any drop in FPS.
Relevancy 50.31%

I getting a 1440p monitor in a couple of days and I have 2 gtx 670 from gigabyte factory overclocked windforce edition.
Are the cards capable of playing games on ultra settings with 1440p res?(like battlefield 4,crysis 3 and batman)

A:1440p with 2xsli gtx 670

two GTX 670's at 1440p should be able to handle BF4 at ultra but I'm not sure at 60 fps due to your cards having 2gb of VRAM as BF4 is VRAM intensive at 1440p and i noticed you mentioned Crysis 3 at 1440p crysis 3 is more vram intensive at 1440p than any other game I have ever played not to mention performance wise it isn't all that great, I can't promise you 60 fps constantly but I can say it should be a smooth experience.
Relevancy 50.31%

I want to know that the panel of ASUS VX24AH is IPS or TN ??
And I have another question :
Can HDMI1.4 get 60HZ in 1440P ??


A:HDMI 1.4 and 1440p

According to the specs on the Asus website it's IPS:
Panel Type : In-Plane SwitchingClick to expand...

As for the 1440p over HDMI 1,4, you'll have to try and see if it works. The monitor does support 1440p over HDMI but some video cards will not and limit it to 1080p, you can sometimes create a custom resolution, most new ones should go to 1440p/60Hz over HDMI.
Relevancy 50.31%

Samsung has announced that their latest 32-inch Ultra HD monitor, the U32E850R with support for AMD's FreeSync technology, is now available in the United States with a rather hefty price tag of $1,199.

Read more

A:Samsung launches 32-inch 4K monitor with AMD FreeSync

With those prices of decent sized monitors and capable GPUs, We are years from 4K being more of a gimmick for the few rich. I just wait for QWHD to go down to earth prices. They're stuck at 350? for like two years now?
Relevancy 50.31%

AMD has provided an update on the state of their FreeSync technology, confirming that monitors supporting the adaptive sync technology are now available in select locations in Europe, the Middle East and Africa. It's expected that FreeSync monitors will hit...

Read more

A:FreeSync monitors now available, and they're cheaper than G-Sync equivalents

I don't see why? Freesync changes your monitor big time! I mean just look at the on/off freesync from the picture at the front.

Atleast with gsync your monitor doesnt need to actually change.
Relevancy 50.31%

All right I found a weird bug regarding Freesync Freesync from stops waking sleep after up working VS sleep mode So to enable freesync you need to put the display into Gaming mode When you to that you Freesync stops working after waking up from sleep see an actual prompt that says AMD Freesync ON at the top Then you enable it in the driver and you should be good to go However when you set Gaming mode the brightness and contrast go to each which is WAY too bright for my taste so I lower it down to and When I do that the display Freesync stops working after waking up from sleep changes from Gaming to a personalized settings Freesync still works perfectly fine that is UNTIL the monitor goes to sleep when it wakes up no matter after how long all my settings are preserved but freesync is DISABLED In order to reenable it I need repeat all my steps OSD - gaming mode lower brightness and contrast EVERY TIME I also tested what happens if I change into gaming mode without changing any of the defaults afterwards Freesync remains enabled after sleep So the bug lies when you change any settings AFTER going into gaming mode I also tried installing the HP Display Assistant thinking I could at least control things without going into the OSD and sadly it cannot activate gaming mode so I am stuck using the physical buttons on the OSD Otherwise this is the perfect display Freesync stops working after waking up from sleep for the price it has everything I was looking for and the resolution for this size is perfect at scaling If someone could help me out with this freesync bug I would be thrilled
Relevancy 49.88%

Be interested to see some benchmarks at resolutions we game at , heres mine 1440p EVGA 980ti OC+ latest drivers

A:heaven benchmark 1440p

Good idea and Nice score, 1440p is fun

Single GPU

Relevancy 49.88%

Hi, I currently have a Samsung P2450 and I love it (24"/1080p), is there a 1440p upgrade that won't break the bank?

A:Looking for a 1440p monitor upgrade

1440p is pretty hard not to break the bank still but I can offer a few suggestions:

27" QNIX 2560x1440p $349 (This contains a Samsung Panel inside 8ms response time)

27" Crossover 2560x1440p $329 (Has a better response time to the one above 6ms response time)

27" Yamakasi Catleap 2560x1440p $379 (6ms Response, this brand has some of the best reviews)

Name brands like Samsung and Acer cost a lot more, these get good reviews and are just fine for use. They all have decent reviews, yet the Yamakasi's from the newegg site always seems to have the most 5 star reviews and get good feedback. No matter what, your going to be limited in your choices in this area if you can pay a fortune lol. They are still in the Luxury price point range in my book until they hit below 300.

Hope this gives you an idea!
Relevancy 49.88%

Hey guys,

I have decided I am going to leave the world of 1080p. I am looking to get a Korean 1440p for hopefully ~$300. I have been doing some research and have narrowed down the field to these two Crossover monitors:

1. Perfect Pixel Crossover 2795 QHD Ahips LED 27" 2560x1440 LG IPS Monitor Matte | eBay

2. Perfect Pixel Crossover 27QHD IPS LED 27" 2560x1440 LG s IPS PC Monitor Glossy | eBay

I think I have accounted for most factors, but I am still a little confused about some nuances here and there such as the impact of matte vs. gloss, AHIPS, and overclocking potential.

Does anyone have any recommendations on either one of these two or another one I should consider? Thank you for any and all help in this matter.

A:Looking to get a Korean 1440p Monitor (Help)

You don't want a glossy panel, so that solves that.

Overclocking potential relies on the panel itself and is a gamble. They say 100hz but it could be 75, it could be 85, you never know until you get it.

Both are LG IPS panels so more than likely using the same panel with a different coating, just take note that these only utilize a single DVI-D DL port.

Just a heads up, but Newegg sells a similar panel and an Acer for similar cost if you don't want to take the risk on a Korean panel having dead pixels.

*Official Dealer* Perfect Pixel CROSSOVER 27QHD LED 27" WQHD 2560X1440 LG S-IPS DVI-D Computer Monitor *Tempered Glass -
Acer K272HULbmiidp Black 27" WQHD 6ms (GTG) HDMI Widescreen LED Backlight LCD Monitor IPS DCR 100,000,000:1(1,000:1) Built-in Speakers -

The Acer has different inputs and with DP the chances are higher of a possible overclock.
Relevancy 49.02%

LG Australia has revealed a new FreeSync monitor on their website perhaps a little earlier than the company anticipated, and it could be a great option for gamers wanting to upgrade to a 4K display.

Read more

A:LG's 27MU67 monitor packs FreeSync alongside a 4K, 27-inch IPS panel

4 way split? That's pretty cool. I know other monitors have done it (though none immediately come to mind) but very cool nevertheless. It might not be an IPS type panel but that's not a bad price all things considered.
Relevancy 49.02%

Acer has added a new monitor to their gaming-focused lineup, the amazing looking XR341CK. This 34-inch 21:9 UltraWide QHD (3440 x 1440 pixels @ 75Hz) IPS monitor comes with a curved display in a zero frame design, which Acer says...

Read more

A:Acer reveals 34-inch curved QHD FreeSync and G-Sync monitors

This type of monitor is the best way to channel the power of your GTX 980 Ti, which inherited its anti-aliasing power from the many generations before it, as opposed to having it choke on the 4K pixel-mania in chase for almost the same effect, at the expense of the dropped FPS.
Relevancy 48.59%

I and currently running my decent gaming RIG of a TV and the quality is poor!

I want to know if i get a 1440p Monitor will i still be able to run games on MAX Settings, or is it better to get a 1080p Monitor!
What other Monitor Specs are important?

This is the monitor i have been looking at;
(I don't want a Korean one)

My Specs:
Case: Cooler Master HAF X
PS: Cooler Master Silent Pro Hybrid 1050w
MB: Asus Maximus V Extreme
CPU: Intel i7 3770k (Overclocked to 4.6Ghz)
CPU Cooler: Corsair H110 Water Cooler
GPU: EVGA Geforce GTX 680 Classified 4GB
RAM: Corsair Vengane Pro Series 2x8GB 2400Mhz

Relevancy 48.59%

Hi guys,
I recently downloaded a video that was 1440p (and then the same one that was 2160p) from youtube using Ummy video downloader 2.1. It's MP4 format and when I try to watch it on Windows Media Player (I'm not sure what exact version I have) it only plays the audio for it and no visuals except for a blue/black-ish background and a musical note in a box in the center. At the very bottom left of the screen under the progress bar there's a small little rectangle that has moving "))))))))))" and when I hover over it, it says either "Network is too busy to play file at original quality" or "playing at 254 kbps".
Is there a way to change the settings or update my WMP? Or is there another video player out there that will allow me to watch these ultra HQ videos?
(note: also posting on "Audio and Video" Forum

A:WMP will only do audio for 1440p/2160p videos but no visual

Try VLC.
Relevancy 48.59%

Hi everyone,

I seriously need some perspective. I've ordered an Overlord Tempest X270 OC 1440p monitor. I'm trying to decide between:

1. 2x XFX R9 290X (CrossFire)
2. 2x nVidia GTX 970 (MSI/Asus Strix) (SLI)
3. Single nVidia GTX 980 PNY XLR8 Pro OC

Other parts are:

EVGA 850 G2
Intel Core i5 4690K
Asus Maximus VII Hero
GSkill Trident 16GB
Intel 730 Series SSD (480 GB)

Have been reading up a lot but am finding it hard to choose. Any help is greatly appreciated.

A:GTX 970 SLI, Radeon 290X CF or Single GTX 980 for 1440p (120Hz)

Only the first two options will get you to 120 fps on any game made within the last few years. I have a machine with an i7 and 970 SLI and a machine with an i7 and an EVGA 980 Superclock and at 2560x1440 only the 970s can manage... and not all the time. Most of the time I set my monitor refresh to 100Hz because there's a much greater chance that my cards can get me there.

I don't have any AMD GPUs atm so can't say about that but I will say that I've had one hell of a time getting XFX to honor their warranties in the past.
Relevancy 48.59%

Hey guys,

Im running the following rig: 6700K, GTX 980Ti Zotac Amp Extreme!, 16 GB DDR4 RAM, Windows 10 (running at 4k), Samsung u28d590d (4K Monitor). This question is gaming related. Normally i play games at either 2160p or 1440p. However, if I try to set a game to 1080p (which is different from windows resolution, so Nvidia settings seem to have no effect on it through the control panel), like Star Citizen or for testing purposes Fallout 4 / Arma 3, the colors turn very washed out and grey. The monitor is connected via Displayport. The components used in the build are all from top notch brands. Higher resolutions work fine. Might it have something to do with windows resolution? Any suggestions on how to fix the issue?
Relevancy 48.16%

Please help me guys I am playing a very old game Burnout Paradise is a old year old racing video game I have a very powerful and capable computer to run a year old game Just check my system specs I have a MSI R X Twin Frozr GB This card is a beast at running an year old game old and year drops frames. Game Please 8 1440p Playing Help, at When I played Burn out Paradise at p the game was dropping frames below fps but was getting above Please Help, Playing 8 year old Game at 1440p and drops frames. fps This is a weird issue because the GTX has similar performance to the R X In this video this person has a GTX and is playing Burnout Paradise at p fps no problem Has the exact same Please Help, Playing 8 year old Game at 1440p and drops frames. settings as me all max settings So I assume this is Please Help, Playing 8 year old Game at 1440p and drops frames. a driver issue with the R X What drivers do I need to download so Burnout Paradise will play better Also the audio is messed up too Burnout Paradise is the only game that is giving me audio problems I hear a buzzing noise from my monitor speakers whenever I play Burnout Paradise I know there is nothing wrong with the monitor speakers My monitor is the Acer H HU

A:Please Help, Playing 8 year old Game at 1440p and drops frames.

BTW here is the video of a person playing Burnout Paradise at 1440p with a GTX 960.
Relevancy 48.16%


My second monitor is a Samsung U28D590D set to extend my first monitor. The max resolution my GPU (GT 750m) can run is 2560x1440. When I set the resolution to 2560x1440, my desktop has thick black borders around the wallpaper. (See attached screenshot.) If I set the resolution to 1080p, the desktop is fine. Any resolutions in between also have borders. I can still right click on the black border section of the desktop, so the resolution is being applied, it's just the wallpaper that isn't scaling. Any ideas how to fix this?

A:Black border around Samsung U28D590D monitor at 1440p

Hi try adjusting the scaling in the graphics control panel could be called over or under scanning.
Relevancy 47.73%

Folks I have had some help with this in the past thanks OBP but I am having problems with my query producing results the way I want it The name of the query is amp Budget Remainder amp I want all my amp Budget amp table results to display in this query Currently the only results that display are those were both tables have equal records I want all amp Budget amp records to be displayed in my query because a blank result would mean no money was spent I have tried different joins but it does not give all the budget records My credits field is displayed properly in the query but it does not reflect against the other fields When credits post it should DECREASE the field Total for Year INCREASE the field FY Budget Remainder and DECREASE the field Budget Used What normally happens is Access does not know what join to perform first and I have yet to figure out how to create the SQL I have tried left joins or all inclusive joins but it does not report in the same format needed The DB is attached and any help up my snuff' to not in Joins DB would be most appreciated Thanks CD nbsp

Relevancy 47.73%

help ! when i make a game no one can see my game or join my game ! i told my friend to search for my game and he cant find it !

Relevancy 47.73%

I have 26 avi files on my comp that i want to join together in about grops of 4 or 5 so i can convert and burn them in kvcd format. Are there any programs that will join avi's together so i dont have to convert each and every file. that would be quite a pain


A:Program that joins avi's together

Power Join and avijoin and VirtualDub
Relevancy 47.3%

I ve had this computer since August Asus P K-VM Intel C D E GB Crucial Ballistix eVGA GTS MB not display anything will P5K-VM Asus Dell quot LCD monitor I have never overclocked except for Asus P5K-VM will not display anything setting the memory to V it has been running on default settings A few days ago the Dell monitor died and would not turn on at all So I replaced it with a quot Viewsonic It worked for one night and the next day it went black saying it had no signal I tried moving it to a different DVI port taking out the video card and using the Asus P5K-VM will not display anything onboard VGA resetting the CMOS and also tried another monitor although the Viewsonic works when plugged into another computer So in a nutshell even when I take out the video card plug the monitor into the onboard VGA port and reset the CMOS it still doesn t display anything There are no POST beeps at all I just turn on the computer the fans spin DVD opens closes HDD spins up but nothing gets displayed on the screen I really hope I don t have to replace the motherboard but does anyone have other ideas before I do that nbsp
Relevancy 47.3%

Company Joins Consortium to Ensure Highest Privacy and Consent Standards for Consumers Online Distribution Source PRNewswire Date Friday - January BELLEVUE Wash Jan PRNewswire -- solutions a provider of search marketing solutions today announced it has become a developer member 180Solutions COAST?! Joins of the Consortium of Anti-Spyware Technology vendors COAST COAST http www coast-info org is a non-profit organization comprised of anti-spyware vendors software developers 180Solutions Joins COAST?! and researchers who have come together in an effort to educate and protect consumers and businesses from the Internet s burgeoning spyware problem By working with COAST and complying with its strict Code of Ethics standards and guidelines solutions aligns itself with the organization s governing companies Aluria Software LLC PestPatrol Inc recently acquired by Computer Associates Webroot Inc and NoAdware net Full read http press arrivenet com bus article php htmlSuzi WTF is COAST thinking I don t get it I really don t solutions is one of the most notorious and obnoxious adware spyware companies out there Read about nCase installation problems installation through security holes with no EULA or prompts to install difficulty with uninstalling recruiting affiliates to bundle the software for payoffs per installation and recruiting advertisers by spam most links via Ben Edelman I have a question for Pest Patrol Computer Associates Webroot Software makers of Spy Sweeper both highly regarded anti-spyware programs and recommended by Spyware Warrior s Eric Howes How can you justify admitting solutions into COAST when your very own software targets and removes it CastleCops is asking questions too Have they solutions cleaned up their act Is COAST creating a double standard Something is VERY wrong with this picture http www netrn net spywareblog

A:180Solutions Joins COAST?!

Suzi picked up on Wayne Porters article:Wayne Porter of XBlock is asking To Coast or not To Coast. Recently I wrote a piece called ?Why We Don?t Do Adware? and now I find myself compelled to write again about ?Why We Don?t Do COAST?. A few months ago we had the opportunity to join the group but after reading an article by Nicholas Stark, from LavaSoft and after reviewing the conduct of some of the members we decided to take a pass. It pained us to do so because we feel that the grass roots security movement really needs a collaborative organization sans dues to get together to discuss the complicated trends occurring in the malware space.Wayne discusses COAST and its so-called code of ethics. This is an outstanding article and a must read if you are at all concerned about this sorry state of affairs.Wayne Porter:01.17.05Recently I wrote a piece called ?Why We Don?t Do Adware? and now I find myself compelled to write again about ?Why We Don?t Do COAST?. A few months ago we had the opportunity to join the group but after reading an article by Nicholas Stark, from LavaSoft and after reviewing the conduct of some of the members we decided to take a pass. It pained us to do so because we feel that the grass roots security movement really needs a collaborative organization sans dues to get together to discuss the complicated trends occurring in the malware space.What is COAST?COAST is a non-profit organization comprised of anti-spyware vendors, software developers and researchers who have come together in an effort to educate and protect consumers and businesses from the Internet's burgeoning spyware problem. By working with COAST and complying with its strict Code of Ethics, standards and guidelines, 180solutions aligns itself with the organization's governing companies, Aluria Software LLC, PestPatrol, Inc. (recently acquired by Computer Associates), Webroot, Inc., and NoAdware.netCOAST has recently rised the ire of many activists because of the admission of 180 Solutions. There has been much documentation of conduct from 180 Solutions that makes my eyebrows rise at the very thought of a company like that being admitted into a coalition designed to protect and educate consumers. For the release about 180 check out Their conduct and the conduct of their affiliates has been less than stellar.Full read:
Relevancy 46.44%

I own an asus M2N68-AM SE2 recently it doesn't show any display[even the bios stetup].I have checked the RAM and GPU and they are fine.The monitor works perfectly on other PC's so there is no fault with it.The motherboard receives power[which is evident by the fact that the processor fan works and cd drive works even the lan blinks on] but shows no display.
I have tried to reset the bios jumper yet no display. What could possibly be the problem.

A:No display on ASUS M2N68-AM SE2

Just check whether you've tried these:

If your GPU and monitor are fine, it usually indicates a bad CPU or mobo.
Relevancy 46.44%

Hi, how many displays can my graphics card support, i would like two 1080p displays and potentially a third 1080p television or a 2048x1125 monitor (which i currently use) Thanks
Relevancy 46.44%

Hello My A G notebook has recently started having a very strange problem I had it up on a table hooked into my wireless network as I was working on a sewing project and was referencing several websites I had left it on one particular page for I guess an hour or two I had disabled the screensaver and energy-saving modes so as nto to deal with the hassle of going out of them all the time and when I went to look at it the display was strange Gray hues took on a pinkish cast and the menu bars like right now the menu bar of my browser says ASUSTek Computer Inc -Forum -- which normally are a gradient that goes from blue to gray -- was weirdly banded in shades of pink magenta and yellow The mouse pointer shadow takes on a vague greenish outline as well I rebooted to see if that would help and noticed that the Windows banner the four-colored one that shows up as it starts loading up was weirdly hued as well I can read the text and all its just the colors that are strange There also seems to be a sort of vague pixel wavering going on like the pixels are now more prominent I have tried various things to little effect I know I have nto changed it from its native display mode though I have tested changing it back and forth to see if it helps -- it doesn t I had it set to a purely black screen saver for about minutes and when I turned it back on it did seem to Problem A6G Display ASUS be corrected for a little while before shifting back to this problem I am now trying a lengthy period with a white screen saver to see if perhaps that will somehow help I know ASUS A6G Display Problem it has more to do with ghosting problems which this doesn t seem to have but I don t have a lot of ideas at the moment Oh one last thing I tried was plugging the laptop to my CRT monitor and passing the video through to it The monitor works perfectly so I don t believe its the Radeon as such that is the problem Perhaps the contact with the LCD has gotten a bit dirty or oxidized or a cable has been crimped Or is this a sign of a problem with the actual LCD monitor that will require replacement If you ve any experience with this kind of problem please let me know ASUS A6G Display Problem and detail what steps if any you took to repair it I would absolutely love to get it fixed on my own without having to turn it in for service as I need to have it with me for a business trip in three days Finally if it is an LCD problem -- erk -- does it necessarily mean its about to die on me or can it last a long while more without difficulty I ve taken a screen capture here which shows that the problem isn t the video card as such -- there s nothing strange at all But here is a large unfortunately picture of the screen taken with a digital camera which shows the weird color banding in the normally-pretty menu ba and here is one showing the shutdown menu with a pink radiating ASUS A6G Display Problem circle which again seems to have do with the gradient on that particular screen not displaying properly nbsp

Relevancy 46.44%

This 64 bit gaming machine (which runs faster and hotter than my quad processor Dell Latitude) and which has been running pretty well for a couple of years has recently developed an odd recurring problem, Clicking an icon will cause the display to blank out. The screen then returns (without reboot) but only after some of the type of colour display you might see when running diagnostics. It is equipped with a NVIDIA GeForce 9800M GS.

What could this be? Flash player crashes (which are always a problem) have recently gotten a lot more frequent. Norton is running at all times and doing idle scans and there have been no recent malware incidents reported. However, the Norton install itself is new and is frequently reporting excessive memory usage from Google Chrome or other browsers.

Thanks, cCc

A:ASUS G50 Display issue

Have you tried updating/reinstalling the video drivers?
Relevancy 46.44%

hello everybody !

im having a problem with hjsplit .
after i join the files with hjsplit , i get a rar file .
but , when i try to unpack it with winrar , i get this error message :
no archives found .

what should i do ??
thanks in advance.
Relevancy 46.44%

The scenario is this Table one - Customer list name address phone with CustomerName as Primary Key Table Two - Product list name cost with ProductName as Primary Key Table three - Invoice list with two fields - CustomerName and ProductName Very simple I know but I m only learning hours Customers may have many invoices but each one has only one item on it My problem is I m trying to get a list of customer names and totals for only one product i e customer number has ordered this product times customer number has ordered it times etc I know the statement should be something like select Sum joins tables, AGGHH two MYSQL from sum product productname as total customer customername from customer product invoice where invoice productname certain product group by customername I know that is probably really wrong but what should it be like I know there should be some joins in there but left right inner Please help before I strangle that cat in desperation nbsp

A:MYSQL Sum from two tables, joins AGGHH

An update to the above - I have done the statement in Access (it works...sort of) but when I try to write in in MySQL I run out of characters...??????
Relevancy 46.44%

Hi guys I have an access query where I have created a union join to join fields of the same heading in two different tables live table and an archive table and what I want from the query is to bring back information based on a number record under one of the columns and also based on dates written in text boxes on a form below is my code lt code gt SELECT Cutter CutterName PartName LotNumber Status CutDate FROM Employees Performance WHERE SQL - with joins parameters union Access Cutter LIKE Forms INSPECTOR PERFORMANCE txtBNo AND CutDate Like Forms INSPECTOR PERFORMANCE txtMon amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtTues amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtWed amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtThur amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtFri amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtSat amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE Access SQL - union joins with parameters txtSun amp quot quot UNION ALL SELECT Cutter CutterName PartName LotNumber Status CutDate FROM ARCHIVE Employees Performance WHERE Cutter LIKE Forms INSPECTOR PERFORMANCE txtBNo AND CutDate Like Access SQL - union joins with parameters Forms INSPECTOR PERFORMANCE txtMon amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtTues amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtWed amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtThur amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtFri amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtSat amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtSun amp quot quot lt code gt when this is run it says there are missing operators in the code below lt code gt Cutter LIKE Forms INSPECTOR PERFORMANCE txtBNo AND CutDate Like Forms INSPECTOR Access SQL - union joins with parameters PERFORMANCE txtMon amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtTues amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtWed amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtThur amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtFri amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtSat amp quot quot Or CutDate Like Forms INSPECTOR PERFORMANCE txtSun amp quot quot lt code gt it works perfectly fine when I take out the parameters for CutDate - any ideas where I am going wrong Also I should mention that if i do the same with just one of the tables instead of the two tables without the join and the second part of the sql after the union syntax it works fine I understand that the information is quite vague but I have to abide by an IT policy at work Thank you nbsp

A:Access SQL - union joins with parameters

never mind, had this working myself
Relevancy 46.44%

Hi All I need help w/ an sql query.

What I have is 3 tables.
Ledgers, Accounts and Contacts

For each account there are N Ledgers and N contacts.

I need a query that for each account pulls out all the ledgers (which I have no issue) now I need for each account and all the ledgers query 2 specific contacts. How can I pull this off.

What would be great is something like
.... JOIN contact b1 on (contact.something = account.something where contact.contact_type = something) JOIN contact b2 ON (contact.something = account.something where contact.contact_type = something2)

A:Solved: MySQL Where inside of joins

figured it out.

... join contact t1 on ..... join contact t2 on .....
where t1.typ = ... and t2.type = ....
Relevancy 46.44%


I have this query that displays the institution and the people associated with it.

SELECT Institution.InstitutionID, Institution.[Institution Name], Institution.[Address Line 1], Institution.[Address Line 2], Institution.City, Institution.State, Institution.Zipcode, Institution.Country, Institution.[Member Type], Institution.[Member Status], Institution.Comments, Institution.[Map Coordinates], Institution.Website, Institution.[Fees 2010], Institution.[Fees 2011], Institution.[Fees 2012], Institution.[Fees 2013], People.PeopleID, People.PersonTypeID, People.Salutation, People.[People Name], People.Title, People.Phone, People.Fax, People.Email, People.Bounces, People.[Secondary Email], People.[Bounces 2]
FROM Institution INNER JOIN People ON Institution.[InstitutionID] = People.[InstitutionID];

Can someone show me how to edit the this query to join all the people associated with the institution to display in 1 row?

Relevancy 46.44%

Original Article Redmond Developer News U S Government Joins Microsoft States Joins Against U.S. Government Microsoft Against States The consent decree that partially governs Microsoft's actions about its monopolistic business practices was originally supposed to expire today But Redmond is currently locked in a battle with a coalition of states that want to see federal oversight extended for another half-decade On Friday Microsoft picked up an ally -- the very same government The U S Department of Justice joined Microsoft in its attempt to persuade U S District Court Judge Colleen Kollar-Kotelly that the consent decree has done its job and should expire this month At issue is the antitrust settlement that followed the Court's original finding that Microsoft had unfairly stifled competition through its Windows monopoly Among other things the decree stipulates that Windows development is supervised by a technical committee and ensures that rivals have an even playing field The current deadline U.S. Government Joins Microsoft Against States was moved from today until Jan of next year The DOJ's brief argues that the states' rationale for extending the decree are illogical and even contradict their own past claims The group of states are led as they have been throughout by California and New York called quot Movants quot in the brief quot The California and New York Movants advance U.S. Government Joins Microsoft Against States inadequate and mutually inconsistent arguments to U.S. Government Joins Microsoft Against States justify extension of the Final Judgments both state groups argue theories moreover that are directly contravened by the states' own past statements and actions quot the document states The brief argues a number of points but the main argument it asserts is that the original consent decree was properly adhered to by Microsoft In fact the DOJ asserts even some of the contesting states have said as much quot As the New York Group informed the Court two months ago the Final Judgments quot have achieved their goals quot and quot are enabling the competition they are designed to protect quot The California Movants do not provide any evidence that the goals of the expiring provisions of the Final Judgments have not been achieved when those goals are properly considered in light of the Court of Appeals decision and this Court's ruling Accordingly there is no legal basis upon which to seek such an extension quot it reads The states have until Friday to respond to Microsoft and the DOJ's latest briefs
Relevancy 46.44%

Spyware Doctor added to 'essential software collection'.

PC Tools has announced its Spyware Doctor program as the latest addition to Google Pack, a "free collection of essential software".

Google Pack includes Google Earth, Desktop, Picasa, Toolbar, Photos Screensaver, Talk and Video Player.

It also includes partner software such as Mozilla's Firefox, Adobe's Reader, Norton Security Scan, RealPlayer, GalleryPlayer HD Images, Skype and now Spyware Doctor.

"As part of this partnership we are providing an exclusive version of Spyware Doctor for Google Pack users," said PC Tools chief executive Simon Clausen.

The free edition offers the usual spyware detection and removal as well as real-time protection with PC Tools' new File Guard technology.

The free version is lacking a few features compared to the full version, such as Cookie Guard, Keylogger Guard, Startup Guard and Browser Guard. The free version also lacks phone support.,pc-tools-joins-the-google-pack.aspx

A:PC Tools joins the Google Pack

The free version also shares Spyware Doctor's penchant for false positives in my own tests.
Relevancy 46.01%

So i have had this laptop for about a year now i has never had any problems I think the only risk i took was running production software on it but its been doing well and running the software well for more than six months now About three weeks ago I was just watching the office on it and the episode glitched a bit but i thought nothing of it maybe it still has nothing to do with my current difficulty When i was done i shut the lid of my laptop it was still running and carried it upstairs I realised i needed to actually work downstairs so I carried it back down and when i tried to turn it on it was like quot nope quot Well to be accurate it turns on problems Display ASUS X553M i can see that ASUS X553M Display problems the power light is on but the screen is just ASUS X553M Display problems black and i cant hear any sound or anything It just like being stuck in space or something It doesn t even growl Like you know when the hard drive comes alive I noticed that when I can only turn it off when the charger is out and it mediately turn on when i put the charger in Help please nbsp
Relevancy 46.01%

My Asus laptop is displaying coloured lines crisscrosing each other and no windows 7 display after using it for 3 hours and shut down . I switched it on after an hour and a half and it started displaying the lines. I tried the HD on a similar laptop and it booted alright. Im suspecting a hardware error. Need help here to fix my laptop.

A:ASUS X54C Display Problem

try reinstalling the video drivers,but it sounds like a heat problem

you are using it on a hard flat surface?

check the air vents are clean
Relevancy 46.01%

hi there

recently my notebook an asus x501u has started problems with the display. It has started to show thescreen all blurry and fuzzy and on couple occasions cause the screen to show in 3 rectangular blocks. I have had trouble doing some stuff due to this problem. I was wondering if anyone could let me know what the problem is and how i can fix it. currenlty i nudge the screen back a bit and it sorts out the problem. I have attached an image showing the problem
Relevancy 46.01%

More DogsSymantec Corp. has fessed up to using a rootkit-type feature in Norton SystemWorks that could provide the perfect hiding place for attackers to place malicious files on computers.The Eweek article is here,1895,1910077,00.asp

A:Symantec Joins Sony In The Rootkit Business

Just another reason to avoid Norton System Works, a hodge-podge of clunking applications. Just my opinion.
Relevancy 46.01%

Here is my situation:

A user running windows 2000 on an NT4 domain joins a win2000 domain of the same name. How do I keep his local user settings (desktop, my documents, outlook etc.) from beginning anew?

A:Windows 2000 user joins new domain


Try set him up with a roaming profile.

Open up User Manager for Domains, select his user account and open it.

Click on the Profile button and edit his profile like shown below (substituting the words server, share, username for the actual names)

Then copy his profile out of "c:\Documents and Settings" on his HD to that share.

Then do the same for the Win2000 server, and copy the profile to a server on that domain.

See what happens...


Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Every morning is the dawn of a new error...
Relevancy 46.01%

Okay - I officially miss my brain - it's too hot here and my overheated brain goes into freeze mode.
I have a table that has residential area and location of contact. Both these are stored in the table as a code and in a related table called ResidentialAreas they are decoded.
For my query I need to display the clients residential Area and the location of contact (these may be different) and I want to display the full (decoded) name of the area. How do I do an Inner Join on the the table for the one field and then the other field?
THis is what I have in my query - it doesn't work
FROM (Lead INNER JOIN OPCStaff ON Lead.opcstaffid = OPCStaff.staffid INNER JOIN ResidentialAreas ON Lead.location = ResidentialAreas.RID) INNER JOIN ResidentialAreas on Lead.rarea = ResidentialAreas.RID

A:Solved: Multiple Inner joins to the same table for different fields - how and is it p
Relevancy 45.58%

Hey everyone this is the current build I have setup at the moment Intel i - k with Asus Solved: issues p8z77-v Pro, display cpu Corsair CX psu Asus p z -v pro mobo WD Black TB Hard Drive Evga Geforce Crucial Ballistix sport gb low profile ram I spent a good Solved: Asus p8z77-v Pro, issues with display hours setting it all up only to find that after turning it on I m getting a quot No Signal quot display on both the monitor I ve tried using and an HD tv via HDMI I ve tried taking the dedicated card out and just using the one on the mobo I ve tried hitting the MemOk I ve tried using it with or without RAM mounted The red MemOk LED stays lit not blinking All the fans are runnign properly and it seems like it should work fine No bent pins that I could see I m really out of ideas Update I figured out that it will run with stick of ram without the dedicated card but once I put the in I get the VGA LED on the board Any advice nbsp

Relevancy 45.58%

Hii I recently bought a barebone and a few components to build my new PC however I cannot get any display output from the machine Here s how it is Processor fan spins green led on HDD s spin and CD - Asus Build Display Mystery New No Output Tray opens Ram Processor and New Asus Build - No Display Output Mystery Barebone have all been replaced New Asus Build - No Display Output Mystery at least once Machine has no speaker so I am unable to listen for beeps although I do plan on buying one soon I believe the bios is upto date which does support my processor rev g printed on mobo and on sticker I have tried onboard vga dvi and hdmi as well as a PCI graphics card along with several wires and monitors CMOS has been cleared several times And I HAVE connected the pin power plug I have also tried the setup with minimal components no HDD CD and no difference SPECS Processor AMD Athlon II X Barebone Asus V -M A E w psu Ram GB DDR Mhz x Note For a while the machine turned on but the front light did not and the processor fan span a little slow after lots of messing around both these issues now appear fine still no display output though Any help would be greatly appreciated as I am totally stumped Thanks Jay nbsp

Relevancy 45.58%


I've recently bought a G60vx laptop and installed a clean win7 32bit, all driver are up to date including nvidia display.
i'm using a second monitor and disabled/turned off laptop monitor as i won't be using it.
i did this in the control panel that changes resolution etc. nividia control panel confirms this too. the problem is when i'm dragging windows around on the screen, it's all a bit jumpy and leaves traces of the window as i'm dragging it... this also happens if i'm just using the laptop screen on it's own without the additional monitor.

I've come from using a desktop so is this something laptop users experience?


A:Asus G60VX Laptop display issue

in nvidia control panel try to put the quality all the way up in 3D settings
Relevancy 45.58%

Need a second opinion here

I have a one year old Asus 8400GS, connected via DVI cable to an LCD monitor.

Turned on the computer, just gets a blank screen, can't see any POST messages.
I can hear the hard drive spinning, so hard drive is fine.
If I switch the source to VGA it gets "no signal".
I switched it back again to DVI, just get a blank screen.
Unfortunately I don't have a 2nd PC to try it on.
I've tested the monitor, it worked fine when connected to laptop.
I've tried reseating the card as well, no go.

You guys reckon it's dead?
PC Specs:
Mobo: Asus M2N68-AM Plus
CPU: AMD Sempron LE-1250
2 GB Kingston RAM
PSU: Antec Earthwatts 380W
Monitor: Samsung 2333sw
Relevancy 45.58%

Asus Eeebook x205 won't display wi-fi and connect.

I am using Windows 8.

How do I get it to display the wi-fi and connect ?

When I try to connect to the internet it says-
Windows did not detect any network hardware.


A:Asus Eeebook x205 won't display wi-fi and connect.

The system needs to be running Windows 8.1 before you can get working drivers:

Notebooks & Ultrabooks - ASUS EeeBook X205TA - ASUS
Relevancy 45.58%

Hi guys,

I have got a bit of a problem and im not shure how to sort it out.
I have a Asus en7600gt.
I have had the original drivers installed scince I built the pc and its been running sweet,I decided to update the drivers now I have no screen after the board boots.
I turn the pc on,the screen comes up with the board award detail then it goes to boot of the HD and the screen goes black,there is power to it but its just a black screen.
I can got into the bios and change the boot settings, I changed it to boot of the DVD-ROM so i could do a restore of the xp disc and the screen is still black.

I Don't now where to go from here.

Im running windows XP x64

It would be great if someone could help.

A:Asus en7600gt updated drivers,now no display!

You really dont need to run the restore disk. You just need to get windows to start up in safe mode.
Relevancy 45.58%

I have a inch all in one Asus just one year old A few months ago when it would go into sleep vertical Asus all-in-one lines goes colored to display mode the display would go to colored vertical lines I would reboot and the computer would restart normally Annoying but not a big deal We turned off the energy saver mode so that we would avoid the problem Now however at night sometime between am and am the computer switches over to the vertical lines Also it will not come back after I reboot I just keep getting the lines Now randomly after trying to reboot a MILLION times it will just decide to work Other details that may Asus all-in-one display goes to colored vertical lines or may not be factors One time it told me something about too many programs running in bit color or maybe it was another number Every time I am successful in rebooting the computer some antivirus program that was preinstalled is flashing in my dock I e that it is running Please help I LOVE my computer and it works beautifully in all other aspects Cheers

A:Asus all-in-one display goes to colored vertical lines

Quote: Originally Posted by Loribischof

I have a 27 inch all in one Asus, just one year old. A few months ago when it would go into sleep mode, the display would go to colored vertical lines. I would reboot and the computer would restart normally. Annoying, but not a big deal. We turned off the energy saver mode, so that we would avoid the problem. Now, however, at night sometime between 12am and 6am the computer switches over to the vertical lines. Also, it will not come back after I reboot. I just keep getting the lines. Now randomly after trying to reboot a MILLION times, it will just decide to work.

Other details that may or may not be factors:

One time it told me something about too many programs running in 16 bit color (or maybe it was another number)
Every time I am successful in rebooting the computer, some antivirus program that was preinstalled is flashing in my dock (I.e. that it is running)

Please help! I LOVE my computer and it works beautifully in all other aspects.


Hi Loribischof,

Welcome to Seven forums.

If your system has a video out port then best would be connect it to a external monitor or TV and isolate the issue between LCD and Video card.

Also you should update the video card drivers of your system to to check if it helps in resolving this issue.

Kindly update your system specs here by following this.

Keep us posted with the results so we can advise you further.
Relevancy 45.58%

I am Using ASUS model-P5SD2-VM. With WinXP installed. I have a 32-bit system. Everything was going fine but today when i suddenly started my system, i got some display problem.

Does Anyone Know How To Fix It.

A:Using WinXP on an ASUS motherboard. But The Display is wacky.

Right click->select properties. In display Resolution ( I think it was ) select 32bit color. It looks like it's 16bit.
Edit I found a video on YouTube.
Relevancy 45.58%

I just bought the Asus K53U laptop and when I first opened it up it had what I presumed to be the correct display resolution set at 1368x766, but after I updated everything and downloaded AVG antivirus I can only get 1024x768 and now everything is stretched on the widescreen.

The laptop has a AMD Radeon E-450 processor and am running Windows 7 Home Premium 64 bit. I don't know how to find out what kind of graphics card I have, but when I go to display settings all I see is Standard VGA Graphics Adaptor.

Any help on how to get my display to show its max resolution of 1368x766?

A:Asus Laptop won't display higher than 1024x768

Asus support will be a good place to start.

ASUSTeK Computer Inc. -Support-

Belarc Advisor will also let you know what hardware is on your computer.
Relevancy 45.58%

Seeems like the French are concerned about this bug too.

or it could just be politics


"But Microsoft told BBC News that IE8 was the "most secure browser on the market" and people should upgrade."

So thats ok then if MS say so

A:France joins Germany warning against Internet Explorer

Abarbarian said:

"But Microsoft told BBC News that IE8 was the "most secure browser on the market" and people should upgrade."Click to expand...

Well they're not gonna say it's crap are they?

Microsoft always tell the truth. They told me Vista was the best thing since sliced bread and of course it's true
Relevancy 45.58%

Hello all I work in an organization with PCs all connected to an Active Directory on a Windows Server with a Domain setup only 10 into logs but pre-existed Windows domain, joins accounts AD etc Windows Prior Windows Server we had LDAP on a linux server which is still connected but is no longer used Windows required to have registry keys info here DNSNameResolutionRequired - set to DomainCompatibilityMode - set to and that's the only way we can join Windows to the LDAP domain We purchased Windows server and we still Windows 10 joins AD domain, but only logs into pre-existed accounts install these keys prior joining the Windows Domain But it works everyone logs in they can Windows 10 joins AD domain, but only logs into pre-existed accounts see Windows 10 joins AD domain, but only logs into pre-existed accounts the NAS and file share like a big happy family Windows Joining a fresh install of a Windows PC to Windows Server domain will require these registries added BUT once this is done no domain user can EVER log into active directory no matter if its the actual administrator of the server or a staff user local users are able to login Windows upgraded to Windows PC with undeleted data and prejoined to the Windows domain from Windows only users with opened accounts in C Users will be able to log in as seen in the screenshots if the user does not exist in the path has never logged into the system with a profile since Windows will not be logged in and receive the error There are currently no logon servers available to service the logon request This has nothing to do with the server right is it something to with the registry entries something to with profile parameters Ideas WILL help the human race NOTE in the screenshot you can see users logged in from windows prior Windows installation these users CAN login but for example jerrard blacksmith cannot log in while he's in the AD but NOT in the Users folder as he never logged into that PC Thanks all Monty
Relevancy 45.58%

This was brought Owner/developer Hips Joins Prosecurity Comodo. to the moderators attention a couple of days ago by Melih You might have or not noticed that Pro-Security HIPS is no longer The Prosecurity Hips Owner/developer Joins Comodo. reason is The sole developer owner has now decided to Join Comodo He Prosecurity Hips Owner/developer Joins Comodo. was trying to sell pro-security code to someone else We are glad that he joined Comodo to increase our ever growing R amp D capability He has already contributed towards CIS within the last weeks and look forward to his further contribution Later Prosecurity Hips Owner/developer Joins Comodo. from Melih It is now ok to publicly acknowledge that the main architect developer owner of Pro-Security has Joined our Beijing R amp D center We are continually expanding our capability to provide even better products to market Congratulations to the former developer of ProSecurity HIPS and congratulations to Comodo The announcement is here https forums comodo com hips host intrusi o-t htmlP S- For those who don t know CIS Comodo Internet Security which will be in public beta in a few weeks which will have the up coming CAV amp CFP Including Defense Fully integrated As you can see Comodo is ever increasing the R amp D department all over the world
Relevancy 45.15%


I recently invested in an Asus A7N8X-E MoBo, when it came I already had a AMD Athlon 3200+ 64 Proc, 512MB DDR 400 Kingston RAM, PNY Nvidia GeForce Ti 4200 GFX Card, Modded Case and a Q-Tec 450W Gold Fan PSU, when I put the system together I pressed the on button and all the fans went and also the green power light on the MoBo itself.

But the problem is after waiting and waiting there was no display, no bios beeps, and no POST???

Can any body relate and give me a helping hand please.

A:Help! Asus A7N8X-E, When Connected No Display, No POST, No Beeps

64 bit cpu? on that board?
Relevancy 45.15%

Hi All - just joined.

I just removed a NVIDIA GTX 260 and all software and now I cannot get my screen display correct using the blue VGA connector (removed the DVI as my computer does not support one).

Where do I get an driver to support my Asus 22" monitor?

Microsoft display does not offer this resolution. Been on ASUS site and had a look through several pages here, cant find a driver.

A:Asus 22" Monitor wont display 1680x1050

It's not the monitor its a graphics driver issue. You need to go your motherboard manufacturers website and download the correct video or chip-set driver. Even then it might not support that resolution.
Relevancy 45.15%


Please help me!
My new laptop doesen't recognize my external display AT ALL!
I tried WINDOWS KEY + P, Screen Resolution, ...

Help please! Give me soe tips or maybe videos...


A:Laptop doesen't recognize external display AT ALL! (ASUS)

My computer:

System Information
Operating System: Windows 8.1 Pro 64-bit (6.3, Build 9600)
Language: English (Regional Setting: English)
System Manufacturer: ASUSTeK COMPUTER INC.
System Model: X751LA
BIOS: X751LA.312
Processor: Intel(R) Core(TM) i3-4030U CPU @ 1.90GHz (4 CPUs), ~1.9GHz
Memory: 4096MB RAM
Available OS Memory: 3980MB RAM
Page File: 1647MB used, 3740MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.03.9600.16384 64bit Unicode

DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.

DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

Display Devices
Card name: Intel(R) HD Graphics Family
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Device Type: Full Device
Device Key: Enum\PCI\VEN_8086&DEV_0A16&SUBSYS_15AD1043&REV_0B
Display Memory: 1792 MB
Dedicated Memory: 32 MB
Shared Memory: 1760 MB
Current Mode: 1600 x 900 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: unknown
Monitor Id: CMN1728
Native Mode: 1600 x 900(p) (60.008Hz)
Output Type: Internal
Driver Name: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Driver File Version: 10.18.0010.3574 (English)
Driver Version:
DDI Version: 11.1
Feature Levels: 11.1,11.0,10.1,10.0,9.3,9.2,9.1
Driver Model: WDDM 1.3
Graphics Preemption: DMA
Compute Preemption: Thread
Miracast: Supported
Hybrid Graphics GPU: Integrated
Power P-states: Not Supported
Driver Attributes: Final Retail
Driver Date/Size: 5/9/2014 00:16:30, 26190816 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B78E66-4956-11CF-057E-A735B6C2C735}
Vendor ID: 0x8086
Device ID: 0x0A16
SubSys ID: 0x15AD1043
Revision ID: 0x000B
Driver Strong Name: oem21.inf:5f63e5341cc65b69:iHSWM_w81:\ven_8086&dev_0a16&subsys_15ad1043
Rank Of Driver: 00DA0001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeWMV9_C ModeVC1_C
I also installed all the drivers that I could
Relevancy 45.15%

Hi All,

Today I upgraded my processor on my main PC to a P4 2.80 from a Celeron 2.2.

I went to put the Celeron in my backup PC (Asus P4B266-C mobo) and was unable to get a monitor display. I originally had a Celeron 1.7 processor in, and works fine when I put it back in place of the 2.2. Both processors, other than clock speed, are the same (400 FSB, L2 128K Cache). I have the latest (and last for this board) bios 1006 in. Checking on Asus' CPU compatibility page has the Celeron 2.2 listed as compatable with this board with this bios. All peripherals are properly seated in the mobo.

Could this be a memory problem? My stats are as follows:

Nvidia 5200FX 128MB RAM
SBLive! card
Adaptec SCSI controller
3com 56K modem

Any ideas would be appreciated. Thanks!

Mike T.

Relevancy 45.15%

My Asus SonicMaster notebook pc model X540S suddenly has white washed out display. It had set for about a month waiting for a new power supply. I plugged it in and now the display is washed out to the point where it is unusable. I don't have a clue. If anybody can shed some light or even a starting point, I would be grateful.
Relevancy 45.15%

So, anybody used other one of these LCD displays? VIEWSONIC: ASUS: If yes, please, do post anything you have to say about it! I'd be forever grateful for not having to make a leap into a void of ignorance if I chose to buy one of these. They seem to be decent low-price displays, but you never know. I'd prefer the ASUS one, just because the web store is a new one to me, and I'd like to experience it and it looks a bit cooler to me.
Relevancy 44.72%

Man this weekend has been one treat after another First my receiver decides it doesn't want to send the HDMI signal from my PC to my HDTV on Saturday morning My previous desktop display Lenovo L quot LCD randomly blacks out so that's why I had been using my driver LED full 24" v10.8 HD4830 display ATI + ASUS not = screen + MSI HDTV as my PC display I finally broke down and went a picked up a sweet ASUS M H quot LED display which is connected to my machine via the included HDMI- gt DVI cable and when I fired it up the first thing I did was confirm the right resolution was set x check But there was a quot black border around the desktop WTF I open the ATi CCC and confirm my settings are on p check Still a black border I confirm I have the latest ATi driver everything on my machine checks out ASUS 24" LED display + MSI HD4830 + ATI driver v10.8 = not full screen like ASUS 24" LED display + MSI HD4830 + ATI driver v10.8 = not full screen it should so I hit up google to see if others are having this problem and whaddayaknow tons of people are or have experienced it Come to find out ATi released a hotfix for this problem in driver a so I downloaded and installed it Still have the damn border So I go poking around in the CCC playing with all kinds of settings and what not and come to find out there is one called quot Scaling Options quot I set that to and all is well Man I was pretty damn close to putting my foot through my shiny new display but now I couldn't be happier So if you're having issues like this try upgrading to the driver and adjust your scaling Apparently you could do the scaling thing in but you'd have to do it again after a reboot That's no longer the case with

A:ASUS 24" LED display + MSI HD4830 + ATI driver v10.8 = not full screen

After loading new driver, rescale to zero and switch on 'GPU scaling' for films etc (if you have black borders)
RERUN your WEi - or you could get problems

Your original receiver problems were prob due to incorrect settings in receiver.
I had to trundle thru various settings on my Yamaha 7.1 which like you is on an ATi card >
DVi>Hdmi 1.3c (cert) adaptor
1.3c (Cert) HDMI lead
Optical Spdif for sound (AGP card)

Receiver settings
"HDMi" channel 4
"Function setup" > "HDMI" >
"Standby Through" = "ON"
"Resolution" = "1080p"
"Aspect" = "SMART"

The above 'fixed' settings work for me (hope you have similar)
Relevancy 44.72%

I recently broke the screen to my asus n vz I ended up removing the whole top panel and removing the inverter cord I plugged in a external monitor and it worked fine at first When i restarted i noticed that it starting running hotter and displayed a second option on a p monitor My aoc was made the main display seen though its not the first monitor its second I dont know whats going on I tried to delete or disable the second monitor but phantom Asus monitor in displaying N56vz display options i could not What should i do I used to have c temps idle and not its c It used to display only the external monitor Now it displays and the is my main I dont have any recovery or disks I tried a refresh and it said Asus N56vz displaying phantom monitor in display options quot Asus N56vz displaying phantom monitor in display options missing files quot so i cant even do that Im frustrated that Asus N56vz displaying phantom monitor in display options microsoft was no help So i am pinning my homes here that someone out there in the world can help me

Relevancy 44.72%

Problem as above.
I get the following error if I try to enter the display properties in the control panel.

"Error occured while Windows was working with the control panel."

Unit is a Slot 1 FIC motherboard with a Celeron 450mhz chip 384mb ram, 80gb Maxtor hd, Intel NIC, Soundblaster value audio.
OS Windows 98se

Any ideas how I could fix this? It seems that reinstalling the latest drivers has no effect, I made sure to unistall the previous Diamond v550 drivers first.


A:Installed Asus 7700 Geforce2 GTS and now the display panel won't work

Going to try reinstalling windows and see if there is any joy, the machine stinks stuck at 800x600x24bit color all the time.

Relevancy 44.72%

HI i recently bought ASUS in netbook and installed win bit in it but the display driver takes only standard vga when i try to install drivers from the ASUS website it says either quot does not support this operating system WNT P MCE quot OR quot this computer does not meet the minimum requirement to install the software quot pl help as win7 64bit problem display ASUS for driver 1225C the display quality is very poor the resolution does not go beyond x the dxdiag gives this result ------------------------------------------------------------------------------- ------------------ System Information ------------------ Time of this report Machine name DEVALVYAS Operating System Windows Ultimate -bit Build win rtm - Language English Regional Setting English ASUS 1225C display driver problem for win7 64bit System Manufacturer ASUSTeK Computer Inc System Model C BIOS BIOS Date Ver Processor Intel R Atom TM CPU N GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting DPI percent System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Display Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name Standard VGA Graphics Adapter Manufacturer Standard display types Chip type Intel R XX Graphics Chipset Accelerated VGA BIOS DAC type bit Device Key Enum PCI VEN amp DEV BE amp SUBSYS B amp REV Display Memory n a Dedicated Memory n a Shared Memory n a Current Mode x bit Hz Monitor Name Generic PnP Monitor Monitor Model Monitor Id Native Mode Output Type Driver Name vga Driver File Version English Driver Version DDI Version unknown Driver Model unknown Driver Attributes Final Retail Driver Date Size bytes WHQL Logo'd Yes WHQL Date Stamp Device Identifier D B E - A - CF-F -BB DA C CB Vendor ID x Device ID x BE SubSys ID x B Revision ID x Driver Strong Name Unknown Rank Of Driver Unknown Video Accel Deinterlace Caps n a D D Overlay n a DXVA-HD n a DDraw Status Not Available D D Status Not Available AGP Status Not Available ------------- Sound Devices ------------- Description Speakers Realtek High Definition Audio Default Sound Playback Yes Default Voice Playback Yes Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS B amp REV Manufacturer ID Product ID Type WDM Driver Name RTKVHD sys Driver Version English Driver Attributes Final Retail WHQL Logo'd Yes Date and Size bytes Other Files Driver Provider Realtek Semiconductor Corp HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No --------------------- Sound Capture Devices --------------------- Description Microphone Realtek High Definition Audio Default Sound Capture Yes Default Voice Capture Yes Driver Name RTKVHD sys Driver Version English Driver Attributes Final Retail Date and Size bytes Cap Flags x Format Flags xFFFFF ------------------- DirectInput Devices ------------------- Device Name Mouse Attached Controller ID n a Vendor Product ID n a FF Driver n a Device Name Keyboard Attached Controller ID n a Vendor Product ID n a FF Driver n a Poll w Interrupt No ----------- USB Devices ----------- USB Root Hub Vendor Product ID x x C Matching Device ID usb root hub Service usbhub Driver usbhub sys bytes Driver usbd sys bytes ---------------- Gameport Devices ---------------- ------------ PS Devices ------------ Standard PS Keyboard Matching Device ID pnp Service i prt Driver i prt sys bytes Driver kbdclass sys bytes Terminal Server Keyboard Driver Matching Device ID root rdp kbd Upper Filter... Read more

A:ASUS 1225C display driver problem for win7 64bit

The support page for your model is:
ASUSTeK Computer Inc. -Support- Drivers and Download Eee PC 1225C

Select Windows 7 x64 as your OS

Click the + Symbol next to VGA and download (click 'Global') the .zip file for the driver.

Extract the contents of the zip file, and run the setup.exe file.
Relevancy 44.72%

IT security vendor launches ESET Online Scanner for Facebook to protect all Facebook users against malware ESET the global leader in proactive digital protection joins Facebook s anti-malware initiative and offers ESET Online Scanner for all Facebook users for free ESET s solution will help users to scan and identify malware that was posted to their Facebook account after logging onto an infected computer and users security free to service all for ESET Facebook joins offer safely remove it ESET Online Scanner for Facebook is going live today and will be available for all Facebook users Our goal is to offer our users the right technology to improve their experience of our services and better protect their devices ESET Online Scanner for Facebook will significantly decrease the number ESET joins Facebook to offer free security service for all users of malicious links from among the trillions of clicks that take place every day on Facebook said Chetan Gowda Software engineer at Facebook ESET Online Scanner for Facebook was designed to detect and clean infected computers of Facebook users ESET is pleased to offer its services to Facebook users all over the world Signature low system footprint and ESET s top rated detection technology used in ESET Online Scanner guarantee effective and easy detection for free said Ignacio Sbampato Chief Sales and Marketing Officer at ESET When a Facebook user logs into their account Facebook checks for signs of any suspicious behavior like sending spam messages or infected links to people s friends If this kind of activity is detected Facebook displays a message offering the user a chance to use ESET Online Scanner for Facebook utilized directly within Facebook without a fee or interruption If users download and run the scanner they can continue to use Facebook and other services on their device without any loss of performance When the scan is complete they will receive a notification through Facebook and also be able to review the results of the scan Cleanup begins after the scan is complete if any malware is discovered In the end the user is provided with the result and link to www eset com This service for Facebook is based on free product ESET Online Scanner which protects millions of users online Out of more than million of scans ESET Online Scanner successfully detected malware in almost half of all of instances Source nbsp

A:ESET joins Facebook to offer free security service for all users

they may what to work their zero day protection before doing this
Relevancy 44.29%

Hey there,

I know this is going to sound like a daft question but my father has a Radeon HD 3850 x2 from ASUS and it's a great card, but we're coming stuck about the actual display resolution of the card; it being a dual link I'm some what confused as to how you would go about calculating the actual maximum display resolution of the Dual Link ports to 2 SEPERATE monitors not to one! My father is planning on running two 22" at a display resolution of 1920x1080 at 60hz and the maximum display resolution of the Dual link ports is 2560x1600 at 85hz.. I'm not sure whether the card will run both at [email protected], can anyone help me?!

Kind Regards,

A:Graphics resolutions on Asus Radeon HD3850 x2 - Dual link display

2560x1600 is the maximum resolution per monitor that the GPU can display. You can run both of the monitors at 1920x1080. All you have to do is run the second monitor as an extended display.
Relevancy 44.29%


I shut down my old laptop yesterday, and came to switch it on earlier today, and I just get a blank screen - the LED's flash as normal, fan switches on etc. but even the bios screen fails to load up.

The laptop was/is running XP pro and what's strange is that yesterday it was fine!

Does anyone have any ideas as to what this problem may be and how it could be solved?

Thanks a lot!

A:Asus A6000 Windows XP pro does not even display bios - complete blank screen :-(

Im going to guess either a power supply problem, a motherboard or hard drive failure at this point.
Relevancy 44.29%

The display from the projector has a deep blue tint to it and I can't figure out why. My other laptop connects and displays just fine. What's the problem?
I'm using a VGA cable to connect it.

A:Solved: When I plug my Asus laptop to my projector, the display is bule tinted

Posted this just a little too soon. I figured out it was a faulty cable. It's working now.
Relevancy 41.71%

ok guys im new to ur forum, my problem is this, i have an sli motherboard, currently i am using a single Nvida Galaxy6800xt 128mb 256 bit card, its good for all games i have including cod2 css bf2 and hitman bloodmoney, no problem there then, but i want to upgrade, i want more power ,would dual xts be the answer or a brand new 256card and if a new card what card as there are so many on the market and i dont realy have the knowlagde find the differences from readin the specs of the back of the box pretty lame but there it is , anyone?

A:so much on the market

Your best bet is to get a 7900GT. It will play anything out now at maximum resolution and you can put in a second one down the road when you need it.
Relevancy 41.71%

Hello Friends !

First of all Information Needed :

Computer running good and Internet Connect Permanently

But The Market App was keep loading.........................

Loading since 30 min but not loaded up.........
Here is the PIC :

I don't know where the shit happens.

Thanks in Advance!
Relevancy 41.71%

Thanks in advance for your advice...

I am building a PC and I have decided to buy a OEM Q6600 processor. Being it is OEM it will not come with a CPU Fan or Heatsink. I have always bought retail versions of CPU's. I know this time I will have to go with an after market CPU fan and heatsink.

I was hoping someone would give me some advice on which product would do for my situation. I was looking at the ARCTIC COOLING Freezer 7 Pro 92mm CPU Cooler. I think it fits my needs.

I also have a question about Thermal paste? Do I need it? Or does it already come with all aftermarket CPU Fans/Heatsinks?

Does anyone know if the ARCTIC COOLING Freezer 7 Pro 92mm CPU Cooler comes with Thermal Paste? Would it be a good idea to use more even if the Heatsink already has the paste applied?

Thanks for the help.

Relevancy 41.71%

I managed to snatch up a R X for cheap weeks ago as it was an offer I wouldn't see anytime CPU looking? So the how is market soon here in Mexico got it for Dollars give or take Taking the import fees and all it was a really good deal Anywho I am currently running an A - K So how is the CPU market looking? and it would be a gigantic bottleneck for the x I want to upgrade to a more consistent CPU platform So how is the CPU market looking? but I do not know what I would be the best My budget is around dollars for a CPU and motherboard alone Would it be a good bet to purchase the for now or wait for when FM comes out What about an intel alternative Would it be wise to move over to something intel If so what would be a good choice I am planning to keep this upgrade for to years without any major upgrade That is no GPU motherboard cpu combination for decent gaming Thank you for your time

A:So how is the CPU market looking?

I am sure many will have their opinions on this, but me personally it has to be Intel, on a budget of $500 for just the CPU and motherboard you should be able to get the latest high performance Intel i7 4770K and a decent Asus motherboard. IMO it is the best you can get for your money and will out perform the AMD.

Relevancy 41.71%

I'm in the market for a new gpu. I've been an ATI/AMD from the get go but thinking about getting an Nvidia 680 now that the 700 series is out. My question is; what is a classified gpu, and what's the difference between a non classified and classified gpu?
Relevancy 41.28%

Well recently my laptop was totaled. Yes, it would cost more to repair it then it would to replace it... Soo I'm on the market for a new one. Under $1k. But up to it.

I'm looking for something that can run games like WoW and CS:S with no problem. Also would be nice if it could do basic editing software (e.g. Photoshop, Fireworks, Dreamweaver)

Yah... I've already browsed around Newegg and Tigerdirect but I'm indecisive.

EDIT: It would be NICE if it could run a small 8 man counter strike server, not required though. XD

A:I'm on the market for a new Laptop

A few basic things you want to make sure your laptop has before choosing. Yes i was a salesrep and no i did not like it XD. I did however learn what is needed and what is just overdoing it. At the very least you will want 1GB of ram as vista requires this just to run that is if and when you want to make the transition to that OS. Always check the graphics card as you know all games such as WOW have minimal requirements and with all the awesome spells you will want something decent to render those graphics i would suggest something in the upper 5000s with media accelerator as it comes in handy. Ofcourse it is all based on personal opinion and i would aslo consider style XD hps are usually Nice to look at as well as use.
Relevancy 41.28%

a hand full of questions about after market i7.

first, if my CPU is currently reading within 5-10 deg of the case temp, is it realistic to expect a CPU cooler to improve the temp or should I focus on case fans. currently reading 40C idle up to ~85C @ full load. In my mind this is high considering it has auto-throttle @ 90C and is only rated for 100C.

second, any suggestions on air cooling if I upgrade the CPU cooler? I've heard decent things about the noctua NH-U12P, but can't decide.

Thermaltake Armor+
i7 940 w/ stock cooler
5+TB of misc. HD
12GB Corsair Memory (TR3X6G1600C8DG) @ 1600mHz
2*AMD HD4870 1GB in crossfire
Asus P6T6 Revolution Mobo
Soundblaster X-Fi Fatality Champion Ed. sound card
Thermaltake Toughpower W0133RU 1200W PSU

A:after market cooler

I have an Antec case with 4 120mm fans (2 front intake and 1 top / 1 rear exhaust) my CPU cooler is an Arctic Cooling Freezer 7 (and it's great) MBM shows the case temp usually around 90-95F and CPU 55-65F. I haven't checked to see if the Arctic freezer is available for the i7.
Relevancy 41.28%

Is anyone here using Market Browser (a stock portfolio monitoring program)? I downloaded and installed it but can't seem to operate it. In the first place it appears to allow entry of only 4 stock symbols. When I attempt to add more it just overwrites the first ones entered and I wind up with only 4. What am I not doing or doing wrong? TIA.
Relevancy 41.28%

I am in the market for a new laptop I bet you knew that already from the laptop In the a for new market title of this message Here s what I d like to do I ll mention this and I m looking for feedback on specs if I can do it and the best place to purchase it What I use my laptop In the market for a new laptop for is QuickBooks and all MS Office apps usually run - apps at a time What I don t want is a lot of extra software that I don t need I pay for MS Action Pack that gives me all of the Office stuff and an OS - unfortunately it s Vista - I would like to stay with XP and just set up a test machine here with Vista on it This is my quot primary quot computer I work it everyday I do have a large rolling laptop case that ll fit whatever size laptop I get I was kinda looking at the quot screen and need something with the number pad on the keyboard We ll start here where should I go I ve kinda looked at Dell they re upwards In the market for a new laptop of that s fine if I need to but am I just paying for the name and all the crapware that comes on them Thanks for any input you can give me Brandon nbsp

Relevancy 41.28%

Ok, I'm wondering what the absolute best mobo out there is. I know that the ASUS A7n8x is liked by some people (compilerxp ), but I'd like to know what everybody thinks. I want a powerful mobo with some space to upgrade and lots of high end features... but I don't want to pay an arm and a leg. So, what's the best one out there??? (and why!!! )

Relevancy 41.28%

I'm looking to buy an MP3 player but i'm not sure what to look for. I like the ipods but I read you can't add memory to them. The Zune looks neat but I haven't heard much about it and the reviews I did read were mixed. I need something durable with a sharp look. There are so many out there now that I don't know which one would be best for me...

A:What is the best MP3 player on the market??

they all have their ups and downs
first consideration is do you want a flash or drive based one? A flash drive won't hold as much but they tolerate more josteling around than a drive based one will
second is price, iPods are nice but overpriced for what you get as is the zune (which also makes life hard with its DRM usage).

If I were in the market today (I'm currently a happy Nano owner) I'd be researching Creative products (like the Zen) or SanDisc products like the Sansa

edit --- just noticed sharp look is a criteria for you? may I ask why considering it will spend most of it's life unseen hidden away in a pocket
Relevancy 41.28%

Hello everyone,

It's been a long time since I've been able to do any PC gaming. I've had a Gateway laptop for the past 2 years, and it has been great other than the fact that its graphics card is not good enough to play pretty much any new game (the problem has to do with the dreaded DirectX 9.0c which from searching some forums I've found that this issue has plagued gamers everywhere). Anyway, could anybody recommend a good, reliable, ready-made PC that I can purchase that has the right specs to play the top games? I'm into FPS and RTS games just so you know what I'm looking for. I have not the time nor the know-how to build a computer myself, so I'm looking to buy one for preferably under or just slightly over $1,000. Any help would be appreciated!

Relevancy 41.28%
Relevancy 41.28%

Since the demise of my x850pro, I need a new card on a budget.

I'm looking at either getting another x850pro or a 6800Gt. Are they about the same in terms of performance?


A:In the market for a new card

Do you have PCI*E or AGP?
If you have AGP, a X850XT would be better, and if you have PCI-E, a X1800 or a 7800 would be better, but I'm afraid they're a little expensive.
How much can you afford?
Relevancy 41.28%

Hey all I figure I ask the pros before I do this.. I'm in the market for a new laptop in the $800 - #1000 range... you know, 4 gigs ram, win 7, good graphics, etc.. I was looking at a few Dells but maybe there's a smaller company that amkes good ones that some one may have a recommendation.
All suggestions welcome. Thank you all in advance...
Best regards..

A:In the market for a laptop.

I've had Dell Latitudes at work for a number of years (8+) and have been very impressed/happy with them.

My wife had an Acer at home and while it was a nice machine for the money, tech support was via email only and we had to send the laptop off 2 times for repairs.

My wife currently has an HP laptop and it's been no experiences with support or otherwise.
Relevancy 41.28%

Dear Hardware Forum,

Is this the closet I can come in the Tech Guy Forum to advice on how to choose a new pc? Or perhaps you could recommend another site that is similiar to this and is devoted exclusively, not to problems, but the problem of choosing another pc. I have something in mind. And I need to talk to someone that isn't trying to sell something. I have already posted before in the Windows 98 Forum, but that thread is pretty much finished.


A:In market for newer PC

Maybe it would help if you posted what you are looking for in a machine and what type of applications you intend to utilize.
Relevancy 41.28%

Hey Gang I m looking to buy or build a new PC a the gaming for In market PC but could definitely use some help here I m not too bad with computers I ve built tons in my time but I haven t been keeping up with the new technologies this last year or two as far as video cards CPUs and mobos go Thought I d reach out to you more knowledgable folks to give me a hand The reason I m looking for a new rig is to play FEAR Half Life etc The games that are a little less intense play fine on my current system - but it s going on years old so time for an upgrade anyways I do a lot of multitasking as well - I m a web developer and graphic designer so usually have tons of programs In the market for a gaming PC open at once I m looking for something that s rough tough and built to last as fast as I can afford and easy to upgrade as the times change I ve always built my own computers so never had a reason to check out pre-built systems before After pricing some hardware and comparing it with pre-builts I don t think I ll be saving much in building my In the market for a gaming PC own this time around so thought maybe I ll just get a pre-built and save the hassle I ve checked out the offerings of ibuypower com - they seem to have some great stuff over there the prices don t look too shabby either Problem is - I honestly have no clue what specs to go for There s just so many choices and I ve been out of the loop for way too long I m looking to do this as cheaply as possible without making too many sacrifices where it counts - definitely under preferably around or so If anyone could give me a hand on this it would be greatly appreciated nbsp

Relevancy 41.28%

I am looking to replace my current PC case (HP m8300f) with an after market case and a new PSU. I'm looking for a case that most of all has great air flow, good cable management and ease of access. I need some good suggestions and my budget is $100 or less.

A:after market case

Check out Antec (900), Cooler Master, Thermaltake & Ultra. There are other Companies but I don't know them first hand.

I use this site to get some prices on computer products... Google Product Search
Relevancy 41.28%

My DVD burner ate a DVD and it's lost...I need a new one. I would like to get the best I can afford, but not sure what I need. It should be a SATA drive. I don't want to spend a fortune, since basically what I do is just play and burn standard CD's and DVD's. Any suggestions, warnings, advice? Also a source for great online deals....?

A:in market for new DVD burner

For the two cheapest drives I would get. Samsung or Pioneer: 1036506653 1038406820&bop=And&Order=PRICE
Relevancy 41.28%

I'm currently looking at this Asus 24":

It's either that or a Acer 22":

My only issue is I have a feeling 24" would be too big. I'm mostly on Windows XP. I use a variety of apps like Internet Explorer, Word, Aol instant messenger, and firefox. I play one or two games here and there and watch movies I'd say once or twice a week.

I just wonder if 24" would be too hard on the eyes. Thanks for any input.