Windows Support Forum

New Build Problems - Possible Faulty Motherboard or Something Else?

Q: New Build Problems - Possible Faulty Motherboard or Something Else?

Hi I just recently put together a new system with the core components been a GA-p -DS Motherboard from Gigabyte and the new E Wolfdale CPU s Other components included GB of Corsair Dual Channel Memory XFX GTS Graphics Card W Coolermaster PSU Thermaltake Soprano DX Case Hard - Build Problems Motherboard Else? Possible or Faulty New Something Disk etc Now the problem was everything connected but New Build Problems - Possible Faulty Motherboard or Something Else? nothing would start not make a sound nor even flicker a lil light Once we did manage to get it to work it was found that the CPU fan would not start immediatly rather there was a delay from - seconds After some investigating it was found that the CPU fan delay problem was fixed by moving the connector from CPU FAN to the SYS FAN port on the mobo Furthermore the not-starting-at-all-issue was fixed by simply not including the sound AC- or optional HD from the case external connection for headphones etc onto the motherboard It appeared that it had an effect similar to short-circuiting the whole thing Thus after these two issues were resolved ie change of port and excluding sound the system ran fine and has been doing so as i install everything The question i wanted to ask was Are these problems because of a faulty motherboard fingers crossed its not and if so can the faultiness further affect the remainder of my components within time OR Are these problems because of potential incompatibility with the board and the E as i ve heard some gossip and requires a BIOS update If so where can such a thing be found I thank you for any help in advance as this problem has been worrying me sick A lot of money for a new system that i definitely don t want KAPUT Thanks nbsp

Relevancy 100%
Preferred Solution: New Build Problems - Possible Faulty Motherboard or Something Else?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: New Build Problems - Possible Faulty Motherboard or Something Else?

A BIOS update would be available on the Gigabyte website.
But IMO, RMAing the motherboard would be better in case you encounter further problems.

http://www.techspot.com/community/topics/new-build-problems-possible-faulty-motherboard-or-something-else.98734/
Relevancy 22.79%

As the title says , I accidentally cut a wire between 2 pins (or whatever they are called) and now my PC starts slowing down after 20-25 minutes when I open it. After I restart everything is back to normal but after 20-25 mins its the same again. Is there a way to fix the wire between them or I have to buy a new motherboard? (sry , my english isnt very good. I hope you understood what is my problem) the image is what im talking about ,(the red is the wire) ,I got the motherboard picture from google , so its not mine.
 

http://www.techspot.com/community/topics/accidentally-cut-wire-between-2-pins-in-motherboard.217587/
Relevancy 23.22%

Hi . considering that I don't overclock , I don't wanna SLI , im gonna buy cpu I7 4790 4G - 32G ddr (8x4 quad channel) - Windows 10 64bit .What's the best gaming and cheapest gigabyte motherboard on the market ?
 

http://www.techspot.com/community/topics/gaming-motherboard.217380/
Relevancy 15.05%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
 

http://www.techspot.com/community/topics/problems-with-wireless-network-adapter.188964/
Relevancy 14.19%

AMD has released an updated statement regarding the noise issues experienced by the initial buyers of its Radeon R9 Fury X graphics cards.

Read more
 

A:AMD issues updated statement regarding Radeon R9 Fury X noise problems

Are they saying "screams like a banshee until we smothered it in glue"? Does anyone have a more engineered approach to the issue - like decibels at a specific distance?
 

http://www.techspot.com/community/topics/amd-issues-updated-statement-regarding-radeon-r9-fury-x-noise-problems.216306/
Relevancy 15.05%

It's been a while since I've posted but I've obtained most of the Sims 2 and I TRIED to install Double Deluxe but for some reason my dvd drive isn't recognizing the disc. It spins up and tries to read it, but doesn't do much in the line of effort to read it.
There are no scratches and I took care of the smudges with a cloth. Still unable to read the install disc. It'll read the promo/bonus disc and play it just fine though.
The computer is a Windows 7 with an HL-DT-ST DVD+-RW GT60N Drive.
I have enough RAM, Graphics and other things to run it.
300 Gigs of Space left on the HDD. No idea what's going on here.
 

A:Sims 2 Double Deluxe problems

You might have a bad optical drive. Does it work with other DVDs (DVDs not CDs)? Do you have access to another DVD drive with which to substitute for testing purposes?
 

http://www.techspot.com/community/topics/sims-2-double-deluxe-problems.216270/
Relevancy 23.65%

Lenovo's VP of Design, David Hill, wants to create a new ThinkPad laptop that is heavily inspired by the old-school designs of popular ThinkPad laptops from the IBM era, stretching as far back as 1992.

Read more
 

A:Lenovo design chief wants to build a retro-styled ThinkPad laptop

I used to use one of those old IBM Thinkpad laptops at around that time and I thought it was the coolest thing ever even if it was terribly slow, weighed almost a ton, had a crappy pixelated display (~2ppi it seemed) and was about a metre thick. I loved it.
 

http://www.techspot.com/community/topics/lenovo-design-chief-wants-to-build-a-retro-styled-thinkpad-laptop.215825/
Relevancy 22.36%

Elitegroup Computer Systems, better known to PC enthusiasts as ECS, may soon kiss the branded motherboard market goodbye. Sources familiar with the matter claim ECS is planning to exit the DIY board market due to shrinking global demand and increased...

Read more
 

A:ECS reportedly set to exit consumer motherboard market

Wow didn't even know these guys were still around I've not touched and ECS board since the athlon 64 days and even then I wouldn't buy one lol.

Not saying they were terrible but I've never been a budget system builder so their products have never appealed to me.
 

http://www.techspot.com/community/topics/ecs-reportedly-set-to-exit-consumer-motherboard-market.215774/
Relevancy 15.05%

I have a linksys router that has stock firmware and I can get into the config by 192.168 etc but I can't get it to see the internet. I have a isp that gives dhcp ip so no login needed. Any ideas?
 

http://www.techspot.com/community/topics/problems-with-wrt-54g-linksys-router.215894/
Relevancy 15.05%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
 

http://www.techspot.com/community/topics/building-computer-boot-up-problems.215853/
Relevancy 21.93%

Since pure alcohol, for example pure Isopropyl alcohol and distilled water are supposed not to conduct electricity. What would happen if I dipped a turned-on PCB into it? . What would happen to a motherboard?
 

A:Would a PCB or motherboard be damaged if dipped into pure alcohol/distilled water while turned on?

OUCH ! Your assumptions may be spot on, but OMG why would one try this?????????

There's something called 'leakage' - - current flow when it's not expected.

I was working in an aerospace lab and the the EE had me perform an experiment because I said "the resistivity of the salt water was too low and leakage would trigger the device". So we got a bucket of salt water and dropped the device into the bucket - - precisely 30 seconds later (the designed timeout), the bucket erupted and salt water spewed everywhere [yes, the device was an explosive link].

The trigger point for the explosive was <500ma
 

http://www.techspot.com/community/topics/would-a-pcb-or-motherboard-be-damaged-if-dipped-into-pure-alcohol-distilled-water-while-turned-on.215856/
Relevancy 24.94%

Hello TS! I have come here today because I am looking for feedback on a budget build for my friend. His price range is preferably $600-700 but he can go as high as $800ish. This is what I have put together so far: http://pcpartpicker.com/p/9R7gcf

I originally went with a 250GB SSD and 8GB of RAM but he thought it was too little (I was thinking external HDD+250GB). Also what is the consensus here about an i3 versus the 860K? I am thinking the quad core is better over the dual core. Also, should the cost savings from the above questions be translated to a better GPU? Finally, I read online that a 450W PSU wasn't gonna cut it so I upped it to a 750W (same price as 650W after rebate)?

Thanks for the help in advance!

He will be primarily playing DOTA 2 (eSports) and CS:GO (leisure).

Edit/Note: I will also be posting this on Tom's Hardware to get as many opinions as possible, so don't be offended D) if you see it on there!
 

A:Feedback on build for a friend

First I have built a nice system using that board; it was great to work with. Newegg.com has this motherboard and that cpu as a special combo for $133.00.

Second, if that is all he is doing with his system that AMD cpu will do him just fine. i3 is an Intel cpu and when using Intel the unwritten rule is that the i5 quad core is the sweet spot for gaming. But, again, that AMD is quite fine.

Why 16 gigs of RAM? If he was doing video rendering or using intense graphic software I could see it but 8 gigs is very good for gaming. Save money and get only 8 gigs.

Corsair makes great power supplies; good choice.

I really don't know that gpu but from the specs and for what he is doing, again, it will do everything he needs.

I don't know that case. With that motherboard I used the Cooler Master HAF 912. Good room, well built, and plenty of air flow especially with an AMD because they can run hot. You may want to get some extra case fans. Also, perhaps an aftermarket cooler.
 

http://www.techspot.com/community/topics/feedback-on-build-for-a-friend.215526/
Relevancy 22.79%

Hello,
I had a dell optiplex 7010 (service tag# 3LLBSW1) computer.
I took the motherboard out of this computer and installed it into a new ATX case.
all went well now I 'm having problems connecting the front panel audio, power switch, reset switch, & HD LED)

the dell connector is different than the cables I got on the new case. can anyone please help me to figure out how to plug these cables into the motherboard.

thanks
 

A:Dell Optiplex 7010 motherboard

Attach photos.
 

http://www.techspot.com/community/topics/dell-optiplex-7010-motherboard.198629/
Relevancy 24.51%

Hi All I m planning to build my first ever desktop since my laptop is already having problems and I think it s going to die soon I m going to use the computer mainly for doing D digital artworks editing videos as well as playing games specifically MMORPGs and some like PC First Overclocking) (NO Advice Need Build Gaming Alice Madness amp Skyrim I ll be playing the heavier games on the console so no need to have a monster pc I just First Gaming PC Build Need Advice (NO Overclocking) want something that would accommodate my main use and last First Gaming PC Build Need Advice (NO Overclocking) me a while before I would have the need to upgrade again I also have a budget that I have to stick to I live in the Philippines so it will be Php - Php in USD I think it would be around - As stated above I won t be doing any overclocking whatsoever Here are the specifications of the build I was planning CPU Intel Core i - Processor M Cache up to GHz Motherboard Asus H -PRO GAMER VideoCard EVGA GeForce GTX Ti Superclocked Memory Vengeance Low Profile GB Dual Channel DDR Memory Kit CML GX M A C Storage Samsung GB EVO quot SATA SSD Storage Western Digital Caviar Black TB quot RPM Power Supply Seasonic X W Gold CPU Cooler Cooler Master Seidon V Hybrid Optical Drive ASUS D ST BLACK X SATA Case Obsidian Series D Mid-Tower PC Case Case Fan Scythe Kaze Jyuni PWM mm rpm CFM x Since this is a first opinions are greatly appreciated I m open for First Gaming PC Build Need Advice (NO Overclocking) suggestions if you think there are better parts that should replace the ones listed It would also be very nice if it would be cheaper without losing the performance and quality Thanks in advance nbsp

A:First Gaming PC Build Need Advice (NO Overclocking)

Thorah said:





Hi All,

I'm planning to build my first ever desktop since my laptop is already having problems and I think it's going to die soon...

I'm going to use the computer mainly for doing 2D digital artworks, editing videos as well as playing games, specifically MMORPGs and some like Alice Madness & Skyrim.
I'll be playing the heavier games on the console so no need to have a monster pc.
I just want something that would accommodate my main use and last me a while before I would have the need to upgrade again.

I also have a budget that I have to stick to. I live in the Philippines so it will be Php 50,000 - Php 55,000 , in USD I think it would be around $ 1000 - $ 1200.

As stated above, I won't be doing any overclocking whatsoever.

Here are the specifications of the build I was planning.

CPU: Intel® Core? i5-4690 Processor (6M Cache, up to 3.90 GHz)
Motherboard: Asus H97-PRO GAMER
VideoCard: EVGA GeForce GTX 750 Ti Superclocked
Memory: Vengeance® Low Profile ? 8GB Dual Channel DDR3 Memory Kit (CML8GX3M2A1600C9)
Storage: Samsung 120 GB 840 EVO 2.5" SATA SSD
Storage: Western Digital Caviar Black 1TB 3.5" 7200RPM
Power Supply: Seasonic X650 650W 80+ Gold
CPU Cooler: Cooler Master Seidon 120V Hybrid
Optical Drive: ASUS24D3ST BLACK 24X SATA
Case: Obsidian Series® 450D Mid-Tower PC Case
Case Fan: Scythe Kaze Jyuni PWM 120mm, 1300rpm, 74CFM (x3)

Since this is a first, opinions are greatly appreciated. I'm open for suggestions if you think there are better parts that should replace the ones listed. It would also be very nice if it would be cheaper without losing the performance and quality.

Thanks in advance!Click to expand...

What programs do you specifically use for video editing and such?

Also a couple of notes:
1: That PSU is a bit overkill for that build or most builds. I would suggest a Gold Rated 550Watt as being a cheaper better option for you.
2: Save a couple of bucks and grab a Western Digital Blue 1tb HDD or a Seagate Barracuda 1tb HDD. WD Black HDD's are awesome but generally they are a bit more for not much of a difference overall.

Can you link the site from which you are ordering your parts from?
 

http://www.techspot.com/community/topics/first-gaming-pc-build-need-advice-no-overclocking.210692/
Relevancy 24.94%

Hi guys I m planning to build my first ever gaming PC I do not know that much about specs and all of that The computer is going to be need first PC for advice build ever my I used for indie games like The Escapists Gmod KSP Pixel Piracy etc heavy games like Skyrim Tomb Raider The Witcher etc and also games like Lichdom Battlemage and Hearthstone It has to be able to play the heaviest games at a consistently high framerate at least - I also own a PS which will be used to play games that are consolebased like ACU horrible game BTW and console exclusive games like Bloodborne Since this is my first ever PC build I want it to last long I won t be doing any overclocking it scares me Therefore I will also be able to pay about I don t know about this pricetag because I don t know how the US taxes and Denmark where I m from has a very large tax I will also be able to pay more than this but I seems right Here are the components that I was planning to use Can you give me some feedback Are there any of these things that won t fit together is I need advice for my first ever PC build something overkill underkill I won t I need advice for my first ever PC build pay for a high end GPU if I have a low end CPU Things have to fit together CPU Intel Core i - Processor M Cache up to GHz GPU GTX Gaming G - MSi MotherBoard Z Gaming - MSi I know nothing about motherboards Memory HyperX Fury Black Series GB x GB Again I know nothing about RAM Storage SAMSUNG EVO MZ- E B AM quot GB SATA III Storage Seagate Barracuda ST DM TB RPM Power Cooler Master G M Would this be enough or would it be overkill CPU Cooler Stock Once again I don t know if this is enough but I am not going to OC sooo Would liquid cooling make sense or should I invest in a stronger cooling unit DVD writer ASUS DVD-Writer Black SATA Model DRW- F ST Case Cooler Master HAF Advanced A case has to be stylish This looks okay and there seems to be room for everything Do I have to buy better fans or are the stock ones good enough Please give me some feedback I really need it to be confident with my PC build If I don t get to know more about this I will have to buy a pre-build PC from another pro company nbsp

A:I need advice for my first ever PC build

Hi. First, I am not sure you are aware of it but right now Newegg.com has a three combo special that includes your processor, motherboard, and memory that will save you $42.00. So you can rest assured what you listed with those items will work well.

1. The i5 is considered by many to be the sweet-spot for gaming. Good choice.
2. HyperX memory is made by Kingston and they manufacture excellent RAM and have for years.
3. That motherboard is a BEAST. Do you need everything/will you utilize everything that it offers?
4. I would just get a stronger cooling unit.
5. Check out Western Digital's Black series for hard drives in the 7200 rpm models.
6. Couldn't say about the psu; I usually use the Corsair line. Whatever you choose seriously consider either the Gold or Plantinum Plus certification. 650 watts of power would probably do you but research how much power that video card demands and what the manufacture recommends.

As for the case, the last four systems I have built have all been encased in the Cooler Master HAF series. I absolutely love them for air flow and build quality but make sure that you purchase a an additional side fan and top fan for greater air flow. Here is a good rule to keep in mind: Between the inflow of air or its exhaust, exhaust is the more important. I would get a 120mm size fan for the side and blow in and a 140mm side for the top as exhaust.

I want to suggest that you seriously consider getting the bigger brother of the 912. I found that the 912 is excellent for the micro-ITX boards but for me personally it seems a little cramped for the standard ATX boards -- though I have done it without issue. Look at the HAF 922 which is a mid-tower but with tons of room; I have one for my main rig. There is the full tower 932 but that is probably overkill.

Hope this helps.
 

http://www.techspot.com/community/topics/i-need-advice-for-my-first-ever-pc-build.213776/
Relevancy 14.62%

Basically I think it s Laptop Samsung Ultrabook Series 5 Problems; been happening for a month now My laptop screen glitches - the images distorting and sometimes green text appearing - Laptop Problems; Samsung Ultrabook Series 5 before Laptop Problems; Samsung Ultrabook Series 5 righting itself and crashing The only way I can get the Laptop Problems; Samsung Ultrabook Series 5 laptop to function again is to turn it off via the power button or take the battery out and put it back it again It has also become slow starting up - taking at least five minutes before you can log in and then a further five before you can actually do anything The cursor sometimes gets stuck in the center of the screen - I can access things using the tab screen but the cursor won t move whether I use the laptop touchpad or my USB mouse The fan has also been sporadically speeding up before calming down again - even though I ve been doing the same thing for the past god knows when I ve done a boot-up scan using avast had a look through all of my files and gotten rid of any old files that I don t need on there in an attempt to create some space but I ve got about - gb free so I can t see why that should be a problem Nothing happens before the glitches crashes so I don t think I m causing it by moving it and so on About a month ago the charger port was fixed at a laptop repair shop and then the laptop itself was sent off to SAMSUNG to have the motherboard replaced because I mistakenly wiped the bios since one driver update shut the laptop off in the middle of the bios update so I don t know if something is loose and so on I m planning on selling it in a month or two so it s not that much of a problem but of course I don t want to sell it to someone if its being a pain in the backside I also switched from integrated graphics to a nvidia geforce graphics card that is in the laptop when I bought it so that might be why Basic Info Samsung Ultrabook Series Intel Core i GB Ram TB Hardrive bit Operating System NVIDIA Geforce GT M nbsp

A:Laptop Problems; Samsung Ultrabook Series 5

This sort of problem is tough to troubleshoot over the internet. It could be quite a few things that could cause the symptoms that you're experiencing. With that said, I'd probably start with updating the discrete GPU drivers. Since you did switch from integrated to discrete, this could be the main cause for the graphic glitches which is probably crashing the system.

Moving forward, I think you should download something like CPU-Z to monitor the CPU load and temperatures during the crashes. It could be that your CPU is overheating and could use some attention.
 

http://www.techspot.com/community/topics/laptop-problems-samsung-ultrabook-series-5.213703/
Relevancy 24.51%

Hi, Guys (And Gals) I'm attempting my 1st PC build and HAVE used the various online power supply calculators... however I'd like to hear some feedback from you all. No matter where I look online I always like to come here to be sure. My specs for the build are as follows:

MoBo: GIGABYTE GA-F2A68HM-H FM2+ USB 3.0 MATX
Amd A6 5400K 3600Mhz Blk Edt 1mb 65w Socket FM2


Video Card: XFX RADEON R7 240 2GB DDR3 LOW PROFILE
RAM: ADATA XPG V1 DDR3 1600 4GB

HDD: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G

I would really like to use one of the 350W or 400W power supply I stripped from my previous PC's. I'm thinking of hooking it to an HDMI or VGA projector eventually though (Haven't bought it yet) Can I get away with one of these and play a game like World of Warcraft? or do I need to order something like the
SolidGear 650W PS2 ATX Power Supply on Tiger Direct?

Thanks in advance for any advice & thoughts
 

A:1st Build Power Supply Question

Over engineer the PS;

Calculate the actual needed power,

add a fudge factor and

multiply by 1.5.
Then round up to the next commonly available size
 

http://www.techspot.com/community/topics/1st-build-power-supply-question.213326/
Relevancy 15.05%

I have a keyboard that has been working fine last night then this morning this happened:

When I type o it types o+ and when I type l it types l and enter (the key)
So this makes it extremely hard to get anything done, please help, thanks
 

A:Keyboard problems

How old is the keyboard? Sometimes "gunk" gets built up under the keys and can cause the keyboard to start failing. Have you tries to remove the keys (or take the keyboard apart) and properly clean it? There are plenty of tutorials (video and non-video) available if you are unsure of how to clean a keyboard.
Regular cleaning on all computer parts will extend the life of those parts.
 

http://www.techspot.com/community/topics/keyboard-problems.213578/
Relevancy 24.94%

Is this a good build to play newer shooter games and games like the witcher 3
Any recommendations for better parts this will cost $473 is budget is 500

Compatibility Check: No issues/incompatibilities found
CPU
AMD FX-6300 3.5GHz 6-Core Processor
$96.93 $96.93 OutletPC
Buy
CPU Cooler
Cooler Master RR-HT2-28PK-R1 54.8 CFM Sleeve Bearing CPU Cooler
$15.99 $15.99 SuperBiiz
Buy
Motherboard
MSI 760GMA-P34(FX) Micro ATX AM3+ Motherboard
$54.99 -$10.00 $44.99 Micro Center
Buy
$10.00 mail-in rebate
Memory
Mushkin Essentials 8GB (2 x 4GB) DDR3-1866 Memory
$50.99 FREE $50.99 Newegg
Buy
Add Additional Memory
Storage
Western Digital RE3 750GB 3.5" 7200RPM Internal Hard Drive
$28.01 $3.99 $32.00 Amazon
Buy
Add Additional Storage
Video Card
Gigabyte Radeon R9 280 3GB WINDFORCE Video Card
$179.99 -$20.00 $2.99 $162.98 Newegg
Buy
$20.00 mail-in rebate
Case
Thermaltake Commander MS-I ID ATX Mid Tower Case
$47.99 -$15.00 $32.99 Micro Center
Buy
$15.00 mail-in rebate
Power Supply
EVGA 500W 80+ Certified ATX Power Supply
$36.99 $36.99 SuperBiiz
Buy
 

A:$500 gaming build

PCPartPicker part list: http://pcpartpicker.com/p/92ZHZL
Price breakdown by merchant: http://pcpartpicker.com/p/92ZHZL/by_merchant/

CPU: AMD Athlon X4 860K 3.7GHz Quad-Core Processor ($72.89 @ OutletPC)
CPU Cooler: Cooler Master Hyper TX3 54.8 CFM Sleeve Bearing CPU Cooler ($17.22 @ Amazon)
Motherboard: ASRock FM2A88X Extreme4+ ATX FM2+ Motherboard ($76.99 @ Newegg)
Memory: G.Skill Ares Series 8GB (2 x 4GB) DDR3-2133 Memory ($60.99 @ Newegg)
Storage: Seagate Barracuda 1TB 3.5&quot; 7200RPM Internal Hard Drive ($48.75 @ OutletPC)
Video Card: Gigabyte Radeon R9 285 2GB WINDFORCE 2X Video Card ($162.98 @ Newegg)
Case: NZXT S340 (White) ATX Mid Tower Case ($59.99 @ Newegg)
Power Supply: EVGA 500W 80+ Bronze Certified ATX Power Supply ($29.99 @ NCIX US)
Total: $529.80
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2015-05-31 08:39 EDT-0400
 

http://www.techspot.com/community/topics/500-gaming-build.213086/
Relevancy 23.22%

Hi guys

I have an intel DP55WB whitsburg a pair of matched 2gb sticks installed at the moment in slots 1 and 3 and nothing in 0 or 2.

I put a new 4gb stick of IBM ram in and get 3 long beeps and it keeps repeating. Everything goes back to normal when I take out the new stick. It happens in both slots 0 and 2.

Am I doing something wrong? With the new stick do I need to change the placement of my original ram?

Thanks!
 

A:New ram makes motherboard beep

This motherboard has support for DDR3 1333 /1066 MHz DIMMs. If you insert DDR3 1600 it probably will not work. Intel motherboards are famous for sticking to the specifications and not exceeding them. I own 2 Intel Motherboards.

I don't know if this is allowed but here is the Intel Specifications of the Motherboard.
http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dp55wb.html

Make sure you unplug the computer from the wall or the power strip before adjusting RAM DIMMS. All RAM is different. Normally you add it in Pairs to maintain the dual channel functionality. If you don't the RAM will slow down. It is not wise to mix and match different kinds of RAM. This can be related to capacity, latency, SPEED, voltage. Then some RAM may not work with other RAM due to incompatibility with the existing RAM. Some RAM may not work in your motherboard due to incompatibility with the motherboard. Some shorter DIMMS also use a different voltage and you cant mix different voltages. RAM is not just buy it and stick it in.
 

http://www.techspot.com/community/topics/new-ram-makes-motherboard-beep.212524/
Relevancy 22.36%

I get a bit jittery when I'm unplugging cable connectors (these images are just examples, I'm thinking of all types of connectors). What's the best way to safely unplug them?, pull from the cables or from the plastic case. What's your experience?. This pics are just a few examples of connectors. I'm posting this thread about any type of connectors. Thank you.


 

A:What's the best way to unplug laptop cable internal connectors on motherboard etc?

Many simply pull apart. Watch out for the ones with locking tabs though. I don't think you have anything to worry about as long as you take your time.
 

http://www.techspot.com/community/topics/whats-the-best-way-to-unplug-laptop-cable-internal-connectors-on-motherboard-etc.212863/
Relevancy 24.51%

Hello pc builders, I'd like to ask for some advice on building a gaming pc. I've picked out some parts that I think are good, but I do not know that much about custom building computers and what parts are most suitable for gaming.
I'm trying to keep the price limit at $1000 USD. Here are the parts that I've picked out.
CPU: Intel Core i5-4570 3.2GHz Quad-Core Processor
CPU Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
Motherboard: MSI Z97-GAMING 7 ATX LGA1150 Motherboard
Memory: Crucial Ballistix Sport 8GB (2 x 4GB) DDR3-1600 Memory
HDD: Western Digital BLACK SERIES 1TB 3.5" 7200RPM Internal Hard Drive
Video Card: EVGA GeForce GTX 750 Ti 2GB Video Card
Power Supply: Corsair CX 500W 80+ Bronze Certified Semi-Modular ATX Power Supply
Case (probs doesn't matter) Cooler Master Storm Scout 2 Advanced ATX Mid Tower Case

Thank you
 

A:Are These Specs Good for a Gaming PC? (First Build Ever)

Looks like a nice build to me

I would drop the cpu down to this
https://pcpartpicker.com/part/intel-cpu-bx80646i54440

and upgrade the gpu to this
https://pcpartpicker.com/part/sapphire-video-card-100364l
 

http://www.techspot.com/community/topics/are-these-specs-good-for-a-gaming-pc-first-build-ever.212847/
Relevancy 22.36%

Hello,

I have a HDMI cable for my monitor, with a nvidia graphic card...

but now I have a big doubt, I dont know if my motherboard's graphic card's imput is not working anymore or if its my graphic's card after a FLASHY BLACKOUT today...

my nvidia control panel is not working anymore... whenever I try using VGA or HDMI with my graphic card it doesnt show any sign in the screen... so im currently using my normal VGA motherboard's imput...

I tried using an old graphic card and its not working, I tested the VGA cable and HDMI cable and they are working perfectly...

yet, after I set the graphic card in the slot, the fan it start working, if I unplug the graphic card but leave the curent cable, it doesnt start the fan so I guess the motherboard's imput is working

so idk what's the problem here, I have all the drivers and everythign was working perfectly before the blackout
 

A:Broken motherboard slot or graphic card

Well... its too late and soon for expect an answer but...

I tested my graphic card in an old motherboard and it was working... it didnt load windows cuz of the diferent motherboard but connecting my VGA in my gpu worked, and the HMDI didnt work I guess because it need to be configured after windows loading etc
 

http://www.techspot.com/community/topics/broken-motherboard-slot-or-graphic-card.212639/
Relevancy 23.22%

So I made my first custom build pc recently and my specs:
Motherboard: Z97 GAMING 5
CPU: Intel 17-4790k
GPU: Gigabyte Geforce G1 GTX 970 4GB
Ram: 16gb ddr3

In my MSI software (MSI Command center) it goes around the 85 degrees when I play Battlefield 4 on ultra.
Is the motherboard temp the same as the CPU temp? and is 85 degrees too much?
I do use the stock cpu cooler.
Also I have a 200mm front and a 140mm in the back.
 

A:Motherboard at 87 Degrees?

Download HWiNFO64 and use this software to compare temps. Not saying there is anything wrong with the MSI software, but there is always a possibility that it is not reading the correct temps.
Also, do you overclock? Overclocking will affect the temps, especially if you are still using stock coolers.
 

http://www.techspot.com/community/topics/motherboard-at-87-degrees.212568/
Relevancy 15.05%

For about the past month or so, my W7 tower on DSL occasionally loses its connection to the internet so I right click the the icon in the notification area & click trouble shoot & it reconnects yet my iPhone & Ipad remain online no problem.
Why?
 

A:Intermittent DSL connection problems

Clearly the router is doing find and the activity on W7 IS THE ISSUE.
Examine carefully what was active when the connection was lost.
 

http://www.techspot.com/community/topics/intermittent-dsl-connection-problems.207951/
Relevancy 24.94%

Hello its my first post!
Well anyways I just build my first ever pc using tutorials like (Austin Evans) well I build it turned it on, and all the fans would work then right after stop! Sometimes I get one bleep from the psu, What should I do as im really annoyed as I spent hours do this!

thanks
 

A:PC turns on then off (newly build)

Since you say the machine tries to boot, I'll assume the front panel connectors are correctly connected.
Make sure all cards, memory, and cables are properly seated. Including the 4pin/8pin motherboard power connector.
Try a different PSU. I had a PSU go out that acted this way, after an instant shutdown. Yours could be a DOA that acts the same way.
Try a single RAM module at a time. Switch modules if the first one doesn't help.
Try with all unnecessary components disconnected. Any damaged component can keep the PSU from receiving power good status.

 

http://www.techspot.com/community/topics/pc-turns-on-then-off-newly-build.212476/
Relevancy 22.36%

HI, I was wondering if it is safe to use an atx psu on a motherboard with an eatx power connector. The motherboard has a 24-pin eatx and a 4-pin atx 12v connector. I bought the motherboard and started using an atx psu and everything seems to work ok then realized after it was an eatx power connector on the motherboard. Are there eatx psu's? Thanks
 

A:Safe to use ATX PSU on a motherboard with an EATX power connector?

EATX is a form factor (12"x13") not a power connector. I'm assuming you are talking about using a PSU with a 20 pin (old ATX) connector with a newer motherboard that has a 24 pin (current ATX) connector. If that is the case you will need to consult your motherboard's manual. Some 24 pin boards run fine with only 20 pins some don't. The issue is that each pin in only rated to carry a certain amount of current (Amps). If you overload one of these pins your risk burning or melting the ATX connector on either the PSU, Motherboard, or both.
 

http://www.techspot.com/community/topics/safe-to-use-atx-psu-on-a-motherboard-with-an-eatx-power-connector.181034/
Relevancy 22.79%

Current specs
Intel db75en
Intel i5 3rd gen 3450
Gtx 970 amp extreme edition
Samsung evo 120
PSU corsair vs 650
Liquid cooler h50 corsair

Currently they are on LGA 1155 mobo

I just killed my old motherboard
And now I am planning to buy i7 4790k

There are three motherboards I have in mind and all of them are asus z97 series based. Want to buy only asus..
Z97 A
Z97 k
Z97 c

I want to know that whether I should upgrade and get 1150 mobo and new processor or not!

(I have no plans to put dual gtx 970 bt plan to use secondary gfx card (gtx560) as phyx dedicated card)
If yes then
1. Which mobo I should go for and why?
2. Will the old h50 will be fittable on my new board or not!

Any new advise also appreciated!
Thank You
 

http://www.techspot.com/community/topics/motherboard-liquid-cooler-suggestions.210943/
Relevancy 24.94%

Hey guys im looking to retrofit my 6 year old gaming PC here soon, and by retrofit I mean totally rebuild it. here is my current build:

AMD Phenom II X6 1075T 3.00Mhz
6gb DDR3 RAM
Nvidia GTX 470

my question is this, I am really not having too many issues with frame rates yet even on the brand new games so I was wondering if upgrading to SLI on the GTX470's would be comparable to upgrading to a GTX 970? Thanks for the help guys
 

A:Build advice

Jlow85 said:





I was wondering if upgrading to SLI on the GTX470's would be comparable to upgrading to a GTX 970?Click to expand...

I would say yes. Just look at the benchmarks from Passmark. The 970 is more than twice the performance of a 470.

http://www.videocardbenchmark.net/gpu.php?gpu=GeForce+GTX+470

.
 

http://www.techspot.com/community/topics/build-advice.210856/
Relevancy 23.65%

Hey Guys plz help me out in finding a Compatible MOTHERBOARD which can be upgraded further
Requirements
I have intel Q6600 Processor Core 2 Quad 2.40 GHz (4 CPUs)( I would like to overclock it)
Navidia 9800GT 1gb
Ram 4GB DDR3

I dnt knw if wifi and blutooth comes inbuilt in motherboad if ys thn also include them.
And also suggest a Compatible SMPS Socket(LGA 775)
 

A:Need a motherboard

What is your current motherboard?
 

http://www.techspot.com/community/topics/need-a-motherboard.209509/
Relevancy 24.94%

Hi, this is my first post on techspot, and I am kind of a newbie on building pc. I have never done it and been looking up everything I can. My needs are just basically normal computing but I want to be able to play new games (shadow of mordor). I dont do any video editing or anything. I have been reading that an i3 will be fine and I need a good gpu instead of overkill on a cpu. I also want a good mobo that has plenty of potential (something about more ports???). I just need to be steered in the right direction of what to get without blowing out the budget. I dont play too many games (and no fps and very few online). I just dont want to see a new game in 6 months that I want and dont have minimum sys requirements. Also I was very skeptical about getting an AMD cpu instead because they get so much hotter, but I know alot of people will recomend it. Sorry for being so longwinded.
 

A:Info/suggestions on build? i3?

Hi BraidedDuke5,
Have you thought of going down the used parts path as you seem to be wanting a machine "cheap" with an i3 instead of looking at what kind of job you really want it to do, unless you will only be playing games in a really low resolution (fps). E.g. the Intel NUC and the ASUS Vivo have Core i3 CPU and they are nothing like a gaming PC.
Here is a couple of pros for a Core i5, and they are;
"Intel Turbo Boost":- Which lets the processor increase its clockspeed whenever the workload on the CPU increases and none of the Core i3 CPUs have Turbo Boost.
"Cache":- The i3 (Ivy Bridge) processors have 3MB (except 4 Clarkdale processors which have 4MB) of cache all the Core i5s (except 4 Ivy Bridge processors which have 3MB and 6 Clarkedale which have 4MB), have 6MB of cache. The cache is like RAM for the processor but it is built into the processor chip. So this gives it (the CPU) access to the memory storage a lot quicker. Without a CPU memory cache and RAM the CPU would need to access the HDD which would be even slower.

Searched eBay.com.au for "i5 cpu" in "Computer components and parts" and had a myriad of choices.

You really need to decide on the CPU first then mobo and then components (small SSD for the O/S, graphics card and RAM) and lastly a PSU to power all your choices (you could even bung a cheap PSU in just to get the rig going, so long as you realise that it WILL fail down the line!)

Hope this helps

Edit:- Changed CPU listings to be accurate for world-wide purchasing as some markets did not get some CPU incarnations released as a new product (based entirely on the Ivy Bridge and Clarkdale Core i3 / i5)
Reference Intel 2105/03/22 from http://ark.intel.com/.
 

http://www.techspot.com/community/topics/info-suggestions-on-build-i3.210492/
Relevancy 15.05%

I have a Dell Optiplex 330 which has a 2.0 dual processor with 4gb of ddr2 ram. I have windows xp installed and I have a video card that has 1024 mb of ram. I am unsure of the brand of video card or further specs. I bought it off of ebay some time ago.

My problem is that when I try to play streaming video it wants to freeze a lot. I have already given more space for the virtual memory on my computer: I think 4 to 8 gb and I have set my hardware acceleration way down but these changes haven't helped.

I can download and play movies fine, I only seem to have problems when playing streaming video like from hulu.com or letmewatchthis.com which directs you to sites like: putlocker, deditv, sockshare, loomba, etc. I have used other computers and they don't seem to have as much problems with this so I hope that somebody knows what I need to do to solve this problem. Thanks in advance for any help.
 

A:Freezing problems with streaming video

When you say freezing, do you mean just the video freezes, or the whole system? If its just the video, it could have something to do with your internet connection. Is the computer on wired internet or wireless?
 

http://www.techspot.com/community/topics/freezing-problems-with-streaming-video.164671/
Relevancy 22.79%

Google released the original Chromebook Pixel a little over two years ago. At $1,299, the system didn't make a ton of sense for most but what it did was serve as an example of what a high-end Chromebook could look...

Read more
 

A:Chromebook Pixel 2015: Great build quality, fast, USB Type-C and cheaper (but still too expensive)

Brick-ish.
 

http://www.techspot.com/community/topics/chromebook-pixel-2015-great-build-quality-fast-usb-type-c-and-cheaper-but-still-too-expensive.209610/
Relevancy 24.94%

Hey I m new to this site and I was wondering if I could get some help with my computer From what I ve seen it says my computer is compatible with all the parts I ve chosen Compatible? Is Build My But I wanted some help on here to make sure they will work Below are a list of parts that I will be getting CPU Intel Xeon E - V GHz Quad-Core Processor Motherboard MSI Z Guard-Pro ATX LGA Motherboard CPU Cooler Corsair H i CFM Liquid CPU Cooler RAM Kingston Fury Black Series Is My Build Compatible? GB x GB DDR - Memory Hard Drive Seagate Barracuda TB quot RPM Internal Hard Drive Hard Drive Seagate Barracuda TB quot RPM Internal Hard Drive GPU EVGA GeForce GTX GB ACX Video Card Case Deepcool TESSERACT SW ATX Mid Tower Case Power Supply Corsair CSM W Gold Certified Semi-Modular ATX Power Supply Optical Drive Sony S-CB-PLUS DVD CD Writer Other Parts I Is My Build Compatible? will figure out later Just to give some perspective I will be using the computer to record videos play games and render out edited videos If you think there are better parts to suit the build or if there are any parts that need to be exchanged please tell me below Also I want to stay at least under Thanks Jettster nbsp

A:Is My Build Compatible?

Personaly from just a quick overview so dont take everything for my word, this build seems like it would work well.
What I would do is:
1) I dont think that this build will be able to use a 450W PSU because your parts are pretty high end and the 970 draws alot of power (145W around about) plus everything else I think that you should get a 500W+ PSU so you wont ever have problems related to power you can overclock and be a little future proof.
2) Why not go with more lower storage HDD's and put them in RAID 0? like 3 1tb HDD? each having like 75mb/s totaling to 225mb/s at the minimum as most modern HDDs are faster than those speeds.

Hope this helped and this is only what I would do. Dont take my word for any facts etc from this comment.
Enjoy
~Joe
 

http://www.techspot.com/community/topics/is-my-build-compatible.209304/
Relevancy 24.94%

I put together a list of parts for my first gaming PC for under here is the list of parts http pcpartpicker com user Linkin saved jTfRsY What do you guys think Please tell me if all the parts are compatible good quality and what settings this build is able to play Dying Light The Evil Within Skyrim Minecraft Max Payne Metro Last Light Bioshock Infinite and a few other games and how much FPS I will most likely be able to get this PC and everything else like the monitor OS optical drive keyboard mouse and anything else in July because right now I have and my birthday is in July I usually get around - from my whole family I will also sell my laptop for because on a site it said it is worth that much I might make a few extra bucks through that time so I will have about - I might be able to get better parts if I do get that much Anyway I hope you guys can help and PLEASE as best as you can try to estimate how good it can handle some of the games I listed above it will be a HUGE help thanks a lot guys nbsp

A:Gaming PC Build Under $700 Need Opinions

Get a SSD drive for the boot drive, it will make things load faster, keep the hard drive for u'r down loads, program files, and things that do have to load as fast. and I would advise getting a modular PSU it will make keeping the wires in the case a whole lot cleaner, because u do not have near as many wires connected that way.
 

http://www.techspot.com/community/topics/gaming-pc-build-under-700-need-opinions.208836/
Relevancy 48.59%

I have a computer that I built and I am pretty sure the motherboard is going out on me... Any suggestions for a new motherboard that will support the parts I already have from my previous build?

MoBo - thats going out - : ASUS Crosshair IV Extreme AM3 AMD 890FX SATA 6Gb/s USB 3.0 Extended ATX AMD Moboo

Processor: AMD Phenom II X6 1100T Black Edition Thuban 6-Core 3.3GHz, 3.7GHz Turbo Socket AM3 125W Desktop Processor

Hard Drive: Seagate Barracuda 7200.14 ST3000DM001 3TB 7200RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive

Memory: G.Skill Ripjaws X + Turbulence II Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9Q-16GBXLD

Videocard: EVGA 02G-P3-1386-KR GeForce GTX 460 (Fermi) 2GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card

I built this thing around 2011 so any suggestions for something new that will work for me?
 

A:Motherboard for my build

Take a look here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&IsNodeId=1&N=100007625 600158776
 

http://www.techspot.com/community/topics/motherboard-for-my-build.208651/
Relevancy 15.05%

Hello all...I'm having problems with my Dell PC. I just purchased a sweet new scanner (ScanSnap SV600) and when I scan a lot of pages at once, I get an error message saying I'm out of storage and to restart the computer. The specific code given is 0x8007000E. I've also been noticing when I run a few web tabs at once, sometimes they just go black and I need to restart the browser. It has 8GB of RAM and all the drivers are updated. Anything I'm missing? Thank you kindly!

Dell Optiplex 790
[email protected]
8GB RAM
Win 7 Pro
 

A:Memory Problems?

How much storage space do you have? From what I could research this error is tied to programs demanding a great deal of memory. You say this occurs when trying to scan a lot of pages at once. Does this occur when scanning less material at once? Have you tried updating your drivers for the scanner?
 

http://www.techspot.com/community/topics/memory-problems.208487/
Relevancy 23.22%

Greetings. I have an Asrok Z77 Extreme 6 Motherboard.

I currently have an I5 3570K in there. I believe my Mobo is LGA 1155.

Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.

Not sure if I will see any real increase in performance. I over clock the I5 to 4.2.

Any advice is welcome.
 

A:Question about my motherboard

Larsenex said:





Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.Click to expand...

Sorry, no. While your motherboard does have socket 1155, the processor i7 4790K is socket 1150. You'll need a new motherboard.
 

http://www.techspot.com/community/topics/question-about-my-motherboard.208311/
Relevancy 21.93%

Okay so I am starting this thread here seeing as how Clock and A10-6800K AMD Motherboard Wrong Setting Voltages Speeds the topic of the old one no longer applies to this situation I jumped ahead of myself trying to overclock this CPU which made me question the frequencies and voltages which are supposed to be set automatically by the motherboard I am having a tough time understanding all this I will post links to the exact AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds parts I am AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds using so whoever is keen enough to try to help will know what we re dealing with Motherboard MSI A X-G Gaming CPU AMD A - K Richland GHz Turbo Black Edition RAM Mushkin Enhanced Blackline DDR MHz PC V CPU-Z Screenshots After doing some AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds reading in regards to overclocking I have found out some details which are totally incorrect in my case For starters the FSB to DRAM Frequency Ratio from what I read is supposed to be some reported slightly higher ratios or something similar but CPUZ is showing which sounds absurd Also it s reporting the RAM as PC - at MHz and voltage at I haev Intel XMP enabled on the motherboard and the motherboard reports memory speed in BIOS at DDR- MHz Can someone analyze the above shot and information and clue me in as to what is wrong and what needs to be done I would really appreciate it because I am baffled I have no clue what the CPU-NB frequency and voltages are for so I don t want to mess with something I don t know anything about Anyway any and all help is much appreciated as always nbsp

A:AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds

Go into the BIOS and change the DRAM voltage to 1.60 or 1.65V and set the timing as u see XMP-2132
 

http://www.techspot.com/community/topics/amd-a10-6800k-motherboard-setting-wrong-voltages-and-clock-speeds.208183/
Relevancy 23.22%

Hello All I am having a bit of a strange issue that I have with CPU Motherboard or Strange issue never run into before Yesterday after getting home from the store I booted up my PC and started to play a game although I noticed that I was getting framerate stuttering It seemed to keep dropping a lot throughout my play So I started taking a look at some of my sensor utilities Strange issue with CPU or Motherboard When I opened Asus Probe II I noticed that it was telling me that one of my chassis fans weren t running Okay no problem it must have gone bad I than took at look at the frequency and noticed that my AMD FX- was only running at GHz per core I also checked CPUZ and had the same results So I booted to the bios just to take a look and noticed that it show my Chassis fan WAS running fine and that my frequency was at GHz per core as it should So I though that it must be a fluke Booted back into windows and again same issues So I shutdown and took the side off my case which is also where the Chassis fan it said was running is located Turned the computer back on and noticed the fan was running fine I logged into windows and noticed that seconds after windows logs in that one chassis fan turns off and the CPU underclocks to GHz multiplier All of the other fans in my case still running perfectly GPU running fine HDD s running fine Could it be possible that Asus probe II itself is underclocking my CPU If so what would be causing the fan to shut off My first thought was power-supply but I have no issues when stressing my hardware even in this state I am an IT consultant but have not run into this issue before Any help would be greatly appreciated PC Specs- ASUS m a r Motherboard AMD FX- CPU CoolerMaster HYPER N CPU Cooler Kingston HyperX Blu GB x Galaxy Geforce GTX Ti OC w PowerSupply Cougar Evolution Full Tower Case Samsung gb SSD Let me know if you need any other information nbsp

A:Strange issue with CPU or Motherboard

CPU temperature too high?
 

http://www.techspot.com/community/topics/strange-issue-with-cpu-or-motherboard.203184/
Relevancy 23.22%

Hi, I have a MSI g31m3 v2 s-7529 motherboard and wont turn on.
I change the power supply
I put on some themical paste in the cpu
I put away all hard drivers
but didnt work, only the fan turn on then its turn off
I think the motherboard dosent work.
 

A:Motherboard wont turn on

Please provide list of make and model for everything you have for this setup (CPU, RAM, GPU, Hard Drives, Optical Drives, Power Supply, Aftermarket coolers, etc.). We need to make sure that you have all compatible parts.
Also, have you tried to disconnect all things except the power supply connection to the motherboard, CPU & RAM and see if the motherboard starts?
 

http://www.techspot.com/community/topics/motherboard-wont-turn-on.208015/
Relevancy 24.08%

I recently just built a gaming PC with my friend I have installed all of the drivers for the GPU from the installation disk it came displays dark. Build. glitches goes then New problem? Monitor GPU with Windows has been updated fully also besides three updates that continue to fail They are just security updates they may or may not be the problem The PC runs fine and the display will show New Build. Monitor displays glitches then goes dark. GPU problem? clear and crisp for about half an hour until New Build. Monitor displays glitches then goes dark. GPU problem? glitches will start to appear in the screen and next the monitor will appear black The light is still on and the PC is still running whatever it was last I know this because it did it during a driver installation and after I waited an hour and then restarted the PC the driver install was done Often after I restart the PC nothing will show up at all If I wait awhile and get lucky it will boot up normal The glitches happen most often when I try to run a game The mentioned updates continue to fail and idk why I have ran a troubleshoot for the PC as well and the it says no driver can be found for the PCI Simple Communications Controller After I choose to search for the driver online or on my computer it says no driver found During a Windows Update failure I got another error message concerning my graphics driver saying a problem could ve occurred because a graphics driver is missing Yet the program GPU Tweak that was installed with the disk says that everything s up-to-date When I try to update manually it says the sam thing This computer was not expensive I can post exact specs when I can get back into it and maybe some pics Specs Not listed is a terabyte of memory blu-ray burner and and an msi Z -G Gaming motherboard I have a strong internet connection and am using a DVI port for the monitor I have ruled out the monitor as the problem Before I said the PC was NOT expensive I meant NOT cheap I spent around on the parts nbsp

A:New Build. Monitor displays glitches then goes dark. GPU problem?

Looking at the screen shot of GPU-Z it appears you are running a AMD Catalyst 13.8 BETA drivers. I would suggest downloading the latest drivers from AMD: AMD Catalyst Omega Drivers 14.12. Then go into your control panel and completely uninstall the amd catalyst from your computer. Once completed, you may need to reboot the computer. After reboot, install the newest drivers from the link I posted above. Do so and then try again to produce same error results. Let us know if it works or not so we can try other options, or resolve the issue.
 

http://www.techspot.com/community/topics/new-build-monitor-displays-glitches-then-goes-dark-gpu-problem.207947/
Relevancy 22.36%

Wanted a gaming config ...
I have GCARD > NVIDIA GEFORCE GTS 450 (ASUS)
I NEED a good motherboard for gaming with intel core i3 4160.... 3.6ghz ,lga1150
my options are :
gigabyte/asus
B85 M D3H (or other b85 variants)
H87 M D3H (or other h87 variants)
H97
H81

all above are compatible but its really difficult 2 choose as the differences
even among same chipsets are too close(eg there are variants under same
h87)

all the above boards r in my budget!

games downloaded:
watch dogs ,cod(adv warfare,ghosts),max payne 3,MOH (warfighter),FAR CRY 4,ASSASINS CREED UNITY,Crysis 3 ,Dead Rising 3 ,Dead Space 3 ,GTA,LA Noire,Middle-earth: Shadow of Mordor,Need for Speed Rivals ETC ETC (thank god PIRATE BAY is up agn from COSTA rica)
 

A:Suggest motherboard for nvidia GTS450 & i3 4160 (gaming)

I would go for either the H87 or H97. It is really your choice in the end but all of the ones listed are good. ASUS, Gigabyte, and Asrock are all good board manufacturers.
 

http://www.techspot.com/community/topics/suggest-motherboard-for-nvidia-gts450-i3-4160-gaming.207743/
Relevancy 23.65%

Not sure if this is only confusing to me, but why are there so many different versions of X99 boards by EACH manufacturer?

I'm looking at Asrock, they have about 10 models: http://www.asrock.com.tw/microsite/IntelX99/

Then I'm looking at MSI and there are 6 models: http://www.msi.com/product/mb/#?category=Socket 2011-3&category_no=1179

SERIOUSLY, how to choose?
 

A:Which X99 Motherboard?

There are several ways you can choose a motherboard, but I personally look at the brand first before looking at features because some manufacturers are more reliable than others. I personally like ASUS and Gigabyte but ASRock and MSI are alright also. Now, onto features. There isn't really much you can differtiate between motherboards of the same chipset since most features are largely unimportant to the regular consumer. Usually the more expensive boards have more "features", whether relavent/important or not, is up to the buyer. I would check out this link.

If you still have questions, please ask.
 

http://www.techspot.com/community/topics/which-x99-motherboard.207791/
Relevancy 24.08%

I have a good system. I am likely to give it to my daughter and build a new one. I have read a few reviews of some new Motherboards and processors taking advantage of the new DDR4.

Does anyone have any insight on if its prudent to build in spring or perhaps wait>?

I can wait as my system is still very good. I just like fiddling with new stuff and builds.

Also will Windows 10 be available for builds by this time or again is this a wait and see?

Thanks much!
 

A:DDR4, Build now or wait till Summer?

You can install the preview version of 10 (beta work-in-progress). DDR4 more expensive than DDR3 but of course if you plan on buying CPU to take advantage of DDR4 speed would be the way to go for now.
 

http://www.techspot.com/community/topics/ddr4-build-now-or-wait-till-summer.207710/
Relevancy 33.11%

I got a new laptop recently (this past Sunday) and ever since I turned it on I've had horrible issues with WiFi. It's tothe point where I'm ready to return it to the store and just go without a computer. Keep in mind I'm not very tech savvy, so I might not know what you're talking about.

It's very slow and won't stay connected to the internet. 4/5 times it doesn't load the web page I'm trying to load and after about 5 minutes after powering on it disconnects from my Wi-Fi and refuses to reconnect. The troubleshooter says it's a router issue but resetting the router doesn't do anything at all and no other device in the house is having any issues. I haven't downloaded ANYTHING to it yet. In addition, when it /does/ connect to my Wi-Fi, trying to open any web page brings me to a "you are not connected to the internet" notice.



I have no idea what to do. I need a computer for work but I'm so sick of having problems with them.
 

A:Brand new laptop; faulty wifi process?

Set up the laptop next to the router where the signal should be strongest. Are you sure that you are connecting to your own wi fi network and router? When you switch on the laptop it will search for in range networks and when you spot your own you are asked to give the password before you can use the internet for the first time. If that's not happening maybe its logging you on to a neighbouring unsecured network (no password set) where the signal is weak. If I click on the wireless icon bottom right in my taskbar it brings up a choice of available networks. My icon looks like a set of steps and so the icon shows how strong the signal is. Check that you are connecting to your own router and see how strong the signal is. You mention other devices that work OK but haven't given any details.
 

http://www.techspot.com/community/topics/brand-new-laptop-faulty-wifi-process.207589/
Relevancy 24.94%

http://pcpartpicker.com/p/FWD2TW

all the parts etc will they last ? I wont be doing hardcore like using it all the time but I do want top of the line stuff. I don't mind prices at all. I like to pay for stuff thats worth it.

What could I edit in this build to to make it either better bang for its buck and better for performance?

I want to play all games at ultra and I want to be able to not upgrade anything for a couple years or so.
I mainly will be playing old games like modding GTA IV etc...
 

A:Is this build worth it?

Surprised no one has responded to this yet.
Without knowing what games you might eventually get, its hard to build a computer that can play "ultra" setting. Games being released now are requiring better (if not top of the line - depending on the game) components.
If you were to use the existing setup that you have linked, I would suggest changing a couple things:
The RAM is rated at 1.6V and the motherboard is 1.5V. This is a small issue, but you should try to make sure that it is the same voltage. Makes for less "headaches" while trying to setup the computer. I would also suggest with the RAM - go 16GB (2x8GB) instead of 8GB (2x4GB). 8GB is the norm for gaming now, but who knows in the future. Better to get it now and out of the way, if you can afford it.
I would suggest getting a 800W (or higher) Power Supply instead of the 600W you have listed. This way "if" you do decide to get a different (or add a second) video card, you will have plenty of power to supply to it.
Last thing is you did not include a case to house all of these parts. I would suggest something that has "breathing" room. Get a case that you can add in a couple case fans to create proper air circulation and help eliminate heat buildup.
This is all just my opinion though, so take it as you want. But if you really want to "future proof" as much as possible, my suggestions would help a good deal with doing so.
Let us know what you end up deciding and ultimately come out with when (and if) you build this computer.
 

http://www.techspot.com/community/topics/is-this-build-worth-it.207207/
Relevancy 24.94%

I don't know if this is the topic/forum. I was wondering if this pc build could play all of the following.

Arma 3
Arma 2
Grand theft auto V(GTA5 for when it comes out)
Grand theft auto IV
battle field 3
battle field 4
Dead island
Crysis 3
all metro city's
And a lot of games like that to medium-high-max settings.

If I posted this on the wrong forum I'm sorry.

http://pcpartpicker.com/user/Famous/saved/sZxWGX

If you guys want you can post part suggestions.
 

A:Is this a good gaming pc build?

Lets start with: What is your overall budget for this build? We might be able to build something better depending on how much you have.
Going with what you currently have listed I would suggest only minor changes to include:
The motherboard is a Dual Channel RAM setup - So you need to find RAM that comes as a pair (2x4GB instead of 1x8GB) for better efficiency.
I would also suggest getting a PSU (power supply) that is from a better known manufacture. Yes the one you selected will work, but the lesser brand ones have the tendency to fail more often (and the one you selected does not have too many good reviews).
 

http://www.techspot.com/community/topics/is-this-a-good-gaming-pc-build.207377/
Relevancy 14.62%

See picture below. Any ideas? Ive cleaned the rollers, and the main charger, and pretty much anything else I can find in the copier. Havent replaced the toner cartridge though. Originally there was toner all over the place and the dotted line was a solid black line. Performing the aforementioned maintenance items got rid of the thick black line but now this remains.

Any help is appreciated
 

http://www.techspot.com/community/topics/kyocera-km3530-copier-copy-problems.207362/
Relevancy 24.94%

Okay, I really want to build a gaming PC.
BUT I DON'T KNOW WHERE TO START.
So, I basically want to build a gaming computer for the experience of putting one together.
I'd rather have intel or AMD, whichever is fine.
My budget is anything, but $650-700 MAX.
Now, I know 650-700 is minimum for a GAMING computer (at least I think I know), but all I want to do on the computer is normal gaming. Like, not hardcore 4k thing or whatever, but just ONE monitor playing a simple game. I don't need ULTRA graphic settings on the game, low-medium but still high dps is absolutely fine. I just want to be able to play modern games smoothly.
I have an idea of some stuff I want, BUT I have NO CLUE with compatibility with these things. I don't know how to tell this stuff.
So could someone give me the parts of a good computer for a gamer such as I? I play WoW, D3, MC, L4D2, SMITE, etc.
I shoulda asked this earlier....today's Cyber Monday.. I NEED TO SQUEEZE IN SOME PURCHASES!

Thanks!! Please help me out
 

A:I want to build a Gaming PC

Well, since nobody else replied, here is a start: http://www.techspot.com/guides/buying/page3.html
 

http://www.techspot.com/community/topics/i-want-to-build-a-gaming-pc.207249/
Relevancy 23.22%

I m a tech with years of IT experience PSU. power bad Still or motherboard a won't up Not and I ve built my fair share of computers over the years I have a puzzling one I cannot get to Not a bad motherboard or PSU. Still won't power up the bottom of I m afraid I cannot for the life of me Not a bad motherboard or PSU. Still won't power up get this computer to power on Here is a list of things I ve tried and or eliminated The first thing to happen was quite strange The computer would start when I first got it it was a used system but only after a few presses of the power button I don t ever remember it powering up on the first press of the power button It s an Intel DX BT Extreme Series motherboard with a bit Intel CPU in it GB of RAM FYI the motherboard has a aux power on off switch ON the motherboard itself used for testing at the labs - the manual recommends using the front panel switch however obviously Current state the computer will not turn on at all There are two LED s by the CPU that are for indicating a voltage regulator overheating and the CPU overheating When I hit the power switch the VR Regulator LED blinks quickly once and that is all Ok here goes - Tested PSU came back fine Decided to use that PSU in another system to double check would not boot up in the nd system I replaced the PSU with a good one I know that works of even higher wattage Still doesn t boot up - Tried using onboard power switch same result Tried using the reset switch as a power switch same result so the switches are likely OK I even removed all front panel switch connectors and tried to jumper the two power pins using a flathead screwdriver Still doesn t boot up no power only a solid green light on the mobo when power is plugged in - Reseated all RAM sticks although a system should still POST if a stick is bad as well as CPU same result - Replaced RAM with RAM I know works Same clock speed compatible with this motherboard Again if it s RAM it shouldn t prevent the fans from spinning - Replaced CPU with a good one same socket factor Still no powering up - Removed all other hardware USB cables video card speaker connector drives etc same result - Also replaced the fan with a non-OEM intel fan that has a higher RPM and draws more air - Tried replacing thermal paste on the premise that since the VR reg is showing it s overheating hopefully this would do something - Replaced CMOS battery Same result After testing just about everything I came to the conclusion that it must be a bad motherboard What Yeah a faulty Intel motherboard I ve never heard of such a thing So I RMA ed the board and got the new on in the mail How puzzled was I when the same exact thing happened Words can t describe Solid green light when power cord is plugged in VR light flashes BTW the green light is a V Standby Power Indicator Now in the manaul it states that these lights CPU amp VR LED s will flash when they re indicating a fault not blink once So I tried all the steps again nothing I have replaced every piece of hardware I can think of with good hardware and am still getting the same result - a flashing VR regulator LED Intel has no support for this and the people I ve spoken with at tech support at Intel are stumped My only thought left is a grounding issue which would seem strange to me since the problem gradually got worse that is taking more presses of the power button to power on then eventually no response I am going to switch cases and see if that s the problem If that fails I am out of troubleshooting steps - I ve literally replaced EVERYTHING inside and outside the computer Again to reiterate these are the things that have remained constant in both motherboards original and RMA ed Solid green V Standby Power Indicator Flash of the VR LED when applying power I have replaced every component with the exception of the case and the standouts which I believe have grounding rings on the threads Any ideas nbsp

A:Not a bad motherboard or PSU. Still won't power up

Speaking of shorts, try pulling the motherboard out of the case. Place it on a non-static, non-conducting surface and leaving in the CPU, heatsink/fan, only hook up the PSU, RAM and graphics card, see if will post.
 

http://www.techspot.com/community/topics/not-a-bad-motherboard-or-psu-still-wont-power-up.151315/
Relevancy 23.22%

A time ago I was plugging in to many USB devices at the same time. I had received a message saying that a power problem had occurred. Since then I have been unable to use the two ports, and I have looked up multiple guides on how to fix this. Nothing has worked, and I have run out of options. I do not have the disk anymore for the drivers.
 

A:Universal Serial Bus on MotherBoard

Just a note to any one, Keep the driver disk, not that would have helped, but there is always a chance u might need to reinstall the operating system.
 

http://www.techspot.com/community/topics/universal-serial-bus-on-motherboard.206796/
Relevancy 24.94%

Hi. Im about To build a gaming pc and I have came up with This :

inno 3d ichill geforce gtg 980 herculeZ x4 air boss ultra 4gb GDDR5, DVI, HDMI, 3xdisplayport

Cooler master nepton 280L watercooling system

XFX pro650W core edition full wired power supply

Intel core i7-5820k, 6x 3.30ghz

Asus x99-a

Fractal design define r4 titnaium grey window

Crucial 8gb ddr4 2133 x 2

is this a good build ?

Moderator note: This thread has been moved from another member's thread.
 

A:Is this a good gaming build?

thehubbapubba said:





Hi. Im about To build a gaming pc and I have came up with This :

inno 3d ichill geforce gtg 980 herculeZ x4 air boss ultra 4gb GDDR5, DVI, HDMI, 3xdisplayport

Cooler master nepton 280L watercooling system

XFX pro650W core edition full wired power supply

Intel core i7-5820k, 6x 3.30ghz

Asus x99-a

Fractal design define r4 titnaium grey window

Crucial 8gb ddr4 2133 x 2

is this a good build ?Click to expand...

You should start your own thread next time with the question instead but its decent depending on what your wanting. I am also a bit confused by your wording in spots because it sounds a bit weird.

Are you just gaming on this machine or do you have other ideas in mind?
 

http://www.techspot.com/community/topics/is-this-a-good-gaming-build.206882/
Relevancy 23.65%

Hello all

I have a HP Pro 3405 Microtower PC and I recently reinstalled Win 7 Ultimate.
Now I did a very stupid thing, I managed to install a DDR 2 1GB RAM on a DDR3 DIMM slot, don't ask me how but I did. There was also a DDR3 2GB RAM already there.

I quickly took out the DDR 2 and restarted the system, since then I've been getting 5 beep at startup which means "pre-video memory failure". I reseated the RAM, nothing changed. I looked on google on how to fix it but nothing worked.

I ordered another 2GB RAM from Offtek, same specs as the original RAM stick.
When I tried to install it today, it still was giving me the 5 beep code.
I've tried reseating it, resetting the BIOS, taking out the PSU... nothing >.<

Have I fried my motherboard? Or is there a solution I haven't tried yet?

Thanks in advance
 

A:RAM 2x 2GB on motherboard

If you have tried all that you speak of, sounds like you really messed up your motherboard. I don't think there's much you can do. Maybe if you know what form factor the motherboard is, you can replace it with one like it. If you don't know more then how to replace the RAM in a computer, I would not recommend going strait to replacing a motherboard.
 

http://www.techspot.com/community/topics/ram-2x-2gb-on-motherboard.205839/
Relevancy 21.07%

Hello everyone - I have just assembled a new build It will not power up I need a suggestion to figure out if the problem is the case or the motherboard This is a mini-itx build power-up: power New or Build MB? no supply case's The case is New Build no power-up: case's power supply or MB? Linkworld LC - B This case comes with a volt watt external laptop-style power supply that plugs into the rear of the case just like New Build no power-up: case's power supply or MB? a laptop power supply plugs into a laptop - a barrel connector Inside this power connection connects to a power supply component that is not like a regular ATX power supply but is on a printed-circuit board New Build no power-up: case's power supply or MB? mounted on the case This has several capacitors and other stuff From that comes the -pin and -pin power supply lines for the motherboard I assume the -volt power supply for this external power supply unit is right since it came with the case It was watt The processor is an IBM t with TDP of watts Lower-powered CPUs can be put in a small so I assumed the power supply might be under-powered I ordered a -watt volt power supply with the right size barrel - and same polarity pos inside The MB is an ASRock H MV-ITX It is mini-itx form factor Still same problem Everything is connected correctly When I press the power-on button an external CD drive I have plugged-in spins up for a while But no power light comes on in the front of the case there are no POST beeps the fan for the CPU does not spin up No other signs of life So power is getting into the MB - the external CD drive is plugged into a USB socket in the rear panel of the MB After trying a watt and watt power supply I believe the problem cannot be the power supply cord Can it be that I have too little load I don t think so I plugged in another mm fan and an ol-fashion floppy drive just the power connection to add more load - same thing no power-up no POST nothing but the CD drive will spin up when I open-then-close it yet again So here is the help I need what else can I try -assuming the MB and case are fine is it more likely the case power supply is bad or the MB --Thanks nbsp

A:New Build no power-up: case's power supply or MB?

Well, I figured out the problem.
I am planning to re-do the older mini-itx system I have; it has gotten riddled with Trojan software for kids downloading games; it basically has been de-commissioned already.

So, I took the pico-psu power supply from that older computer, and hooked it up to the one I am making. Everything went perfectly.

So, I un-did that, removed the MB from case, disconnected the barrel-power connection from the case, unscrewed and removed the power supply that had been mounted in the case, put the pico-psu power supply back in place (I had to drill the hole for the barrel-connection out to be a little bigger since the pico-psu internal/external connection is threaded and held in place by nut with lock washer), and routed wires to be clear of cpu fan, screwed MB to stand-offs, and closed it all up.

now, everything is great. I like this linkworld case, but the power supply is worthless. I may try to get a few dollars back from the ebay vendor, to make me happy with a case that is less than what I should have gotten, but is working for me; I don't want to wait on returns, etc.
 

http://www.techspot.com/community/topics/new-build-no-power-up-cases-power-supply-or-mb.206259/
Relevancy 22.79%

Hey guys, building a new PC, and I decided not to go too cheap with core components and leave the video card until later, while still getting everything in one go. Now this being the case, I will need to run non-dedicated graphics for a while (which are decent nowadays). Anyway, I want to go with the Gigabyte GA-F2A88XM-D3H Motherboard and an AMD A10-6800K Richland CPU,

Will the video outputs on the motherboard work with the APU and will I be able to use integrated video until I get a dedicated video card?

The Newegg page for the motherboard says "Integrated Video: None", so I am a little bit confused, is there no integrated video chipset because that's what the CPU is now being an APU?
 

A:AMD A10-6800K with what motherboard for integrated video?

I just built a home office build system for my parents using that exact board with an A4-6300 Richland in a Cooler Master HAF 912 (I really like this case for microATX boards). The board was great to work with and since the APU is on the chip itself my folks didn't need to purchase a video card.

So to answer your question: Yes you'll get your video.

* I would seriously consider getting an aftermarket cooler to replace the heatsink that comes with it.
 

http://www.techspot.com/community/topics/amd-a10-6800k-with-what-motherboard-for-integrated-video.205551/
Relevancy 23.22%

Hello I upgraded my cpu a while ago without checking if my mobo could run it.. worked fine on low usage but when I tried to stress the Cpu the pc died and wont boot/post. Is it the cpu or motherboard that takes damage from this? (Or both?)
I tried with my old cpu but with same result.
/ Andreas
 

A:125W cpu on 95W motherboard

Can you link us to your motherboard, your new cpu and your old one as well?
 

http://www.techspot.com/community/topics/125w-cpu-on-95w-motherboard.206146/
Relevancy 15.05%

Hello,
I seem to have quite an annoying problem with my new 256gb razerbalde. Whenever I launch a game I get a black screen the sound still works but no response from the screen, I have to put it to sleep and back on again and it works even though sometimes I need to do it 10 times or so. I have updated to all the newest drivers and tried a secondary display through hdmi it gives me the following error message: failed to initialize renderer. Unknow error creating the renderer. I only tried launching skyrim so far. The error seems to happen sometimes but not often when I will start the laptop and the screen will be the same. It's more of a black/greyish color and you notice that it is on.
Any help will be of great use. If the post already exists I am sorry and would be happy to get the link.
 

http://www.techspot.com/community/topics/razerblade-problems.206284/
Relevancy 22.36%

Hi,
So I have noticed my pc would shut off randomly and its because the 24 volt connector wasn't in all the way so when the pc would move slightly the connector would disconnect itself. When I go to push the 24 volt in all the way it wont clip onto the clip on the motherboard. It will stay in but it wont fully go in and I can easily just pull it out or it will just fall out from movement. Any ideas how to fix this?
Motherboard- http://www.newegg.com/Product/Product.aspx?Item=N82E16813130741
PSU- http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026
 

A:24 Volt connector wont fully connect to Motherboard

I think it is not 24 volts. it is a 24-pin(also labelled as 20+4pin) , 12volts main power connector.
the slots are designed so that the power connector will slide into the slot to form like a 'lock and key'. to remove it.
see to it that the power connector is inserted in the right direction as shown in the pics (towards the side):


edit, any moderator: please delete this post.
(my second post to this thread is more 'presentable')
 

http://www.techspot.com/community/topics/24-volt-connector-wont-fully-connect-to-motherboard.206189/
Relevancy 22.79%

Just bought a new board and I dont know how to get my geforce gts450 card working
 

A:New motherboard failing to show my card

Have you installed latest NVidia driver pack compatible with your operating system?




www.nvidia.com/Download/index.aspx?lang=en-usClick to expand...


 

http://www.techspot.com/community/topics/new-motherboard-failing-to-show-my-card.206126/
Relevancy 15.05%

I'm having trouble staying on line with telstra connection my internet keeps freezing and dropping in and out I have had trouble with my home line phone and have a bullion modem which this isn't the problem, the problem I believe lays with telstra as I've checked with my server and with downloads and updated my PC so what can I do next.
Thanks
June
 

A:Having problems with connection dropping in and out

June Lomas said:





what can I do next.Click to expand...

Call Telestra
 

http://www.techspot.com/community/topics/having-problems-with-connection-dropping-in-and-out.206048/
Relevancy 24.94%

My new build wont power on all I hear is a few high pitch sounds coming from what I think is the psu.
My specs:

SSD 128GB SAMSUNG 850 Pro
1TB HDD (from previous build it was working fine 2 days ago)

2TB HDD(from previous build it was working fine 2 days ago)

GPU = GTX 680 2GB (from previous build it was working fine 2 days ago) MSI GTX 970 GAMING 4G GeForce GTX 970 4GB 256-Bit on it's way in the mail.

Case is pretty old and doesnt have a lid but it was working fine with my pervious buid)

PSU = CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply (from previous build it was working fine 2 days ago)

Heatsink = Scythe Ashura Universal Processor Cooler

CPU = Intel Core i7-4790K Haswell Refresh Quad-Core 4.0GHz

Motherboard = MSI Z97-Gaming 7 Intel Z97 Motherboard

Memory = CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory

Please help me
 

A:New build wont power on

Disconnect everything except the monitor, cpu, ram. In fact, go down to 1 stick of ram. Will it POST now?
 

http://www.techspot.com/community/topics/new-build-wont-power-on.206021/
Relevancy 15.48%

I have been having quite a few issues with the motherboard I have from ASRock. It is the Z87 Extreme4. My issue is the usb 3.0 No matter what I plug in it says this device can perform faster than this blah blah blah. Anyway, that should not be happening as I am plugging in usb 3.0 devices. What is going on? The other problem is that my front ports that are from the mobod header will no longer recognize any of my external 2.5 hdd. 1 on the back also says this so I am limited to just 3 ports on the back that I can plug into with my external hdd and they are very important to what I do. Is anyone familiar with this? Is this only on this board or a common thing among ASRock? I have other computers and the usb 3.0 works just great.
 

A:USB 3.0 Problems

Have u Installed the drivers? I do not know any thing about ASRock but lots of USB3 have to have the drivers.
 

http://www.techspot.com/community/topics/usb-3-0-problems.205957/
Relevancy 15.05%

I have been experiencing some serious FPS problems with my Laptop recently. I Used to run games at somewhere from 60-120 FPS, but now its dropped down to 5-14 FPS. It happened recently. A couple days ago on Saturday Oct 4rth, I was playing Team Fortress 2 on Steam. I shut off my computer to go to sleep for the night and when I turned on my computer the FPS problem started almost immediately after I turned on the PC. Its not just Team Fortress 2 either, Its happening to all of my other games also. I am not sure on what to do and the only though that comes to my mind when I wonder what the problem could be is a virus. (I have virus protection Webroot but I'm not sure if it works to well.) I might have to Factory Reset my computer, but I want to try different solutions before I Factory Reset. Any Ideas?

My Laptop Info: http://gyazo.com/f1acf76e4e8e9febcec1e6e62991b297

/
 

A:FPS Gaming Problems

Back up your important data and do the Factory Reset. Apply all the Windows Updates, and then try your games. Webroot is not an antivirus program. Try installing MSE:
http://windows.microsoft.com/en-us/windows/security-essentials-download
 

http://www.techspot.com/community/topics/fps-gaming-problems.205822/
Relevancy 23.65%

Hi, i currently have 2 x 1GB sticks of ram in my motherboard at the moment and wondered if i could buy a 4GB stick of ram and use it in conjunction with one of my 1GB sticks of ram, is this possible?
 

A:RAM 1GB & 4GB on motherboard

What are the specs of your pc? how many ram slots do you have spare?

DDR memory must be used in identical pairs for it to operate in dual channel mode. also if your using a 32 bit operating system only 4GB of memory will ever be used by your system.
 

http://www.techspot.com/community/topics/ram-1gb-4gb-on-motherboard.172809/
Relevancy 23.65%

So Im looking for a new motherboard here are my current specs MSI H a Looking Motherboard new for M-P LGA Intel H SATA Gb Looking for a new Motherboard s USB Micro ATX Intel Motherboard Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR Looking for a new Motherboard SDRAM - PCI Express x Intel Core i - K Haswell Quad-Core GHz LGA W Desktop Processor Intel HD Graphics BX I K G SKILL Ripjaws X Series GB x GB -Pin DDR SDRAM DDR Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR SDRAM - PCI Express x So this was my first build and it went great did make the mistake of getting a micro ATX and I have a massive case things that bother my about my current motherboard is that I dont have enough SATA plugs I have alot of hard drives and second I just got monitors and it only has PCI plug So Im also thinking about getting another graphics card to run of my monitors and having my current one run the other I was thinking of getting another GT but I do have a gtx sitting around would they work together Also if you have any advice about changing motherboards and not having to re-install OS clean that would be great nbsp

A:Looking for a new Motherboard

Well you also made the mistake of buying the GT 640 because the gtx 260 is fair amount faster.
 

http://www.techspot.com/community/topics/looking-for-a-new-motherboard.205517/
Relevancy 24.08%

This build will be for my 77 year old mother who lives in another state and I am trying to build this as stable and problem free preventative mode as best as I can with the understanding that any hardware can fail at any time.

Anyway, NewEgg is having both their Blue and Black WD 1TB hard drives on sale that goes off of sale after tomorrow. I know Black is often the choice due to build quality and 5 year warranty. However, the Blue would really help budget wise because every dollar counts and it sees many people have had good success with the Blue.

She does MS Office, email, surfing plus she has an online business that keeps her very busy along with uploading a lot of photos.

Thanks.
 

A:New Build: Western Digital Blue or Black?

Blue. Because of her work tasks.
 

http://www.techspot.com/community/topics/new-build-western-digital-blue-or-black.204928/
Relevancy 48.59%

Hi, I'm building a budget gaming PC but I don't know what motherboard to get. Here's the parts I'm planning on buying:

Intel Core i5-3570
Corsair Builder Series CX 430
Radeon HD7850

A H77 board will do as the cost of a K cpu and Z77 board (I presume) would cost way more. I'm thinking something around the price of a Asus P8H77-V LE.

Thanks
 

A:What motherboard should I get for my build?

It matters on what brand you buy. Some H77 motherboards come close to low end Z77 boards. Also, the 3570K is just $20 more and allows for you to unlock your system fully as long as you have proper cooling.

If you would like, I can take a look at your build and recommend better components if I see it fit. Just provide me with a budget .
 

http://www.techspot.com/community/topics/what-motherboard-should-i-get-for-my-build.203630/
Relevancy 24.94%

Hi guys I have a new job build, after advice A new and few outgoing troubles for the moment so I decided I want to throw some A new build, after advice money away while I can For years I have a had a really simple PC usually for uni basic gaming etc with only a couple of upgrades to GPU PSU but now I A new build, after advice have the itch to create something bigger and largely unnecessary I have read and read and snooped and searched A new build, after advice various tech-based sites but it is kind of like opening a book to the middle and trying to understand what is going on so I am here to ask you fine people for some compatibility questions as well as obvious things I may have skipped over or missed Here is a quick list of things I have ended up being interested in MBoard Asus Maximus VII Hero Z or something similar CPU i - K GHz not sure to the benefits of jumping to i or such GPU s In this respect I am perfectly open to discussion I am willing to pay in total for something ridiculous MSI GTX Ti x PSU EVGA w P Memory Corsair Vengeance Pro x gb DDR - Basically the idea is to spend unnecessarily but also with a little future-proofing in there Things to bare in mind I am by no means rich but at this point in time I would like to spend a little money on myself Seriously though in total anything to give or take a couple hundred would be acceptable Secondly this build would be something I need to spend a month or two saving for to buy so if there is anything new and sparkly coming out in the near future I am sure that I am totally oblivious to it so feel free to advise Thank you in advance for anyone who helps me out nbsp

http://www.techspot.com/community/topics/a-new-build-after-advice.205476/
Relevancy 24.08%

Hello,

I just finished assembling my first build. At first it turned on without a hitch, was able to install windows and a few drivers.

I had to restart a few times, which went fine for the first few times, and then it just didn't boot back up. The power button doesn't do anything, the fans don't start, nothing happens.

When I jump the psu, all the fans start, so I'm thinking the issue must be with the mobo..

Here's a list of all the parts I'm using : http://ca.pcpartpicker.com/p/JFVvD3

Thanks.
 

A:Mobo issue? Custom build won't start anymore

First, are any wires touching that might be causing a short such as a wire touching the back of the mobo? Second, I had something similar happen to me a few years ago with a new build. There is a tried and true though often tedious way that can help diagnose possible issues.

1. Remove all hardware except for one RAM stick from the motherboard and this includes Sata and fan connections to peripherals such as your SSD, etc,

2. Now see if the system boots with only the one RAM stick. If it boots then shut down add the second stick of RAM and then reboot. If it boots then repeat by adding a piece at a time.

3. If is doesn't boot then it is either your mobo or your power supply. Also, check to see if your heat sink is seated correctly.

BTW, nice little system there.
 

http://www.techspot.com/community/topics/mobo-issue-custom-build-wont-start-anymore.205000/
Relevancy 23.22%

Please suggest me a best motherboard (upto Rs. 6000) and a PSU for AMD FX-6300 processor.
 

A:Motherboard for amd fx-6300

Why not try the MSI Gaming 970 motherboard, its pretty inexpensive and a decent motherboard. Where do you shop?
 

http://www.techspot.com/community/topics/motherboard-for-amd-fx-6300.205255/
Relevancy 15.05%

Hi all. Well I am having problems with turning on my Toshiba satellite c50-a-19t laptop. The night before there was a smell coming from the fan so I turned it off. I put it on charge in the morning and when it was fully charged I went to use it. The white light on the front goes on for a sec and then goes straight off and the laptop don't power up. Any ideas guys ???
 

A:Problems with laptop

Sounds as though it may have over heated and something may have shorted out. you will need to have it looked at your local repair shop.
 

http://www.techspot.com/community/topics/problems-with-laptop.204564/
Relevancy 23.22%

I have an old Acer Aspire m3100 desktop and the case to it is broken, I have another case for it but I do not have the installation manual to show me how to reconnect all of the connections from this other case. How can I get or find the diagram showing how to make all connections to this motherboard. I'm trying to restore this computer for my grandson? any help would be appreciated, I've tried contacting Acer but they won't help unless the computer is under warranty and their third-party support doesn't do hardware issues?? I also downloaded a manual from online but it doesn't show the right info.
 

A:Motherboard Installation manual

Check this is the right motherboard.

http://www.gigabyte.com/products/product-page.aspx?pid=2500#ov

The manual is available in the support and downloads section.

Case wiring is pretty standard in most cases (no pun intended). Any details you have about the case your switching to would be helpful.

Motherboards mostly have the names of sockets screen printed next to them.
 

http://www.techspot.com/community/topics/motherboard-installation-manual.205022/
Relevancy 15.05%

Hey.
Everytime I plug in the Ethernet cord to the router. It lights up and doesn't blink. After a couple of seconds, it just goes dark and I'm unable to use the router.

It works from time to time (I always have to unplug and it replug it back constantly) and I tried plugging in the router without the Ethernet plugged in and it looks like it works fine (Lights blinking). I plug in the Ethernet after that and it continues blinking for a few seconds then it darkens.

It's a Linksys router. WRT5462 V1 (Cisco)
 

A:Router problems -_-

Have you tried more than one cable? The cable could have gone bad.
 

http://www.techspot.com/community/topics/router-problems-_.204968/
Relevancy 14.62%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp

http://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Relevancy 22.79%

Hi, I just installed a gigabyte ga-z77x-d3h into my system (i5 3570), and even after reinstalling windows the computer is very glitchy, it takes ages to come on, freezes, and usb devices don't work half the time.

I'm thinking it's a dodgy motherboard. Any ideas?
 

A:System is very glitchy after installing new motherboard

Actually my first post was wrong, (this is someone else's computer) reinstalling windows fixed the glitches it just pauses on the windows logo for about five minutes before booting up.
 

http://www.techspot.com/community/topics/system-is-very-glitchy-after-installing-new-motherboard.204643/
Relevancy 22.79%

I got this desktop computer that has a Asrock board in it Model # FM2A75M-DGS and it comes up with the boot screen and I try to get in to boot settings or anything and it wants a password. I have no clue what the password is and I need help to see if it can be reset. I have looked on the internet everywhere and have had no luck. If I pull the battery will that reset it......help me please. Thanx
 

A:Forgot Password On Asrock Motherboard

Removing the motherboard battery and waiting a couple minutes before replacing it should reset it to where you can gain access again. It should help you. If not then reset your jumper to clear the CMOS. You can get the jumper resetting instruction in the motherboard manual.
 

http://www.techspot.com/community/topics/forgot-password-on-asrock-motherboard.204604/
Relevancy 22.79%

Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping
 

A:Upgrading CPU, question about motherboard compatability

Vidosoli said:





Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping Click to expand...

No, that motherboard is LGA 1156 while the i5 4670 is LGA 1150. You would need a new motherboard to go with that CPU>
 

http://www.techspot.com/community/topics/upgrading-cpu-question-about-motherboard-compatability.204453/
Relevancy 15.48%

Hey so I wasn t really sure where to post this as I am quite new to the forums but here I go So my first problem is with my laptop s adapter charger not really sure what it s called in english it no longer charges as in the tiny green light no longer turns on when I connect it to problems Two an outlet and yes I Two problems have tried more than just one outlet It s dead From what I ve read on the web I suppose the only way out is buying a new charger Or trying to open the charger box and fixing it Is that possible If so any tips on how to do that - My second problem is releated with the internet modem I have cable internet and after this storm a coupel of days ago it started playing tricks on me even though the cable is plugged into the pc and the modem is working for about a whole minute my pc says that the cable is unplugged and only after that does it recognize it and connect me to the internet Any ideea what s wrong I suppose there s fault in my modem because before when it worked just fine about three green lights turned on right after turning it on but now only two do the dsl and power one I don t know fpr sure but I think the third one used to be ethernet And that s about it If anything s unclear please ask english is my third language so I might have made some mistakes here and there thanks for your time nbsp

A:Two problems

DO NOT open that "charger box." It is dangerous to do so because it can hold a charge of electricity for quite some time. Either buy a new charger from the laptop manufacture or, if you can, purchase a new charger from the likes of Targus. I have a Lenovo laptop and bought the Targas brand as a back-up. It works great and Targus supplies several adapters to work on many different brands.

Secondly, was your modem and router plugged into a surge protector or do you have them plugged directly into the outlet?

Your English is quite good.
 

http://www.techspot.com/community/topics/two-problems.203854/
Relevancy 15.05%

Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
 

A:Dvd burner problems...any suggestions

They are so cheap now it is probably worth everyone's time to just get a new one.

If you really want to troubleshoot it, put it in a different computer or OS.
 

http://www.techspot.com/community/topics/dvd-burner-problems-any-suggestions.204100/
Relevancy 23.22%

Hi all,

I have heard of somethings like computer manufacturer and motherborad manufacurer. For example some time ago, when I had problem with my desktop PC, some asked me what's your computer manufacturer and motherborad manufacurer?
what's the difference between these two please?
 

A:Computer/motherboard manufacturer

Computer manufacturer Is most of the time is Dell, Hp,Compaq, Ausu are a few.
Motherboard manufacturer . Asus, Gigbyte, Asrock. Msi, Are a few. This is what they are referring to. When they ask you those Questions .
 

http://www.techspot.com/community/topics/computer-motherboard-manufacturer.204218/
Relevancy 23.22%

In hardware monitor, reading 13.2v on the 12v line.

PSU: http://www.newegg.com/Product/Product.aspx?Item=17-151-107

MOBO: http://www.newegg.com/Product/Produ...30790&cm_re=970_gaming-_-13-130-790-_-Product

Should I be worried? BTW im already about to RMA the motherboard because of broken sound. (might these be related?)
bbasically should I be worred about the immediate health of other parts or something
 

A:12v on motherboard reading 13.2v

What does your boards BIOS voltage monitoring read ? When you say hardware monitor I assume you are talking about the utility?
If this is the case then HW Monitor can have reporting issues with certain chipsets and boards.
If you're reading the voltage from the BIOS's hardware monitor then it could be a faulty voltage sensor (likely), or a PSU running out of specification. Checking the PSU shouldn't present much difficulty if you have access to a multimeter or just have an electrician test the output.
 

http://www.techspot.com/community/topics/12v-on-motherboard-reading-13-2v.204199/
Relevancy 22.36%

Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp

A:The ps/2 port of the motherboard doesn't work properly

No idea!!?
 

http://www.techspot.com/community/topics/the-ps-2-port-of-the-motherboard-doesnt-work-properly.204104/
Relevancy 22.36%

I ve got this legendary socket motherboard DFI LP UT SLI-DR Expert chipset nForce SLI almost new only LanParty - UT using BIOS DFI Del motherboard enter Cannot key Expert SLI-DR NF4 one SATA port is somewhat messed up missing those plastic parts from both sides bought this baby really cheap from well known Romanian e-bay like site okazii ro and I put it on my FX- dual core yeah THAT one and some KINGSTON value memory and tried to boot my rig Here is my problem now this board is Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard working those red diagnostic LEDS start next only one left so no quot LEDs of death quot syndrome for me and the onboard speaker beeps ONCE which I know is always a good thing but I cannot enter BIOS to setup as I need Del key on my PS keyboard is NOT working as it should I press the key and the result is nada nothing first I see the boot logo from Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard DFI after that Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard I see this error message quot CMOS checksum error - defaults loaded press F to continue or Del to enter setup quot and when I press Del I get nothig and when I press F key sometimes I see this message quot Verifying Pool Data and Backup CMOS OK quot and other times I see quot Sil SATA RAID Press Ctrl-S or F to enter RAID utility quot One more thing to add is that I can actually use boot menu selection using Esc key to selct HDD CD-ROM or some other option and this board actually can boot using CD DVD I already tried UBCD rescue CD and some Linux live distros to see if it s not a problem with my FX- processor and I m happy that it is working well is all good no problem here actually I ve seen it s name and working frequency Mhz at POST please help me to solve this problem with my mobo nbsp

http://www.techspot.com/community/topics/cannot-enter-bios-using-del-key-dfi-lanparty-ut-nf4-sli-dr-expert-motherboard.204105/
Relevancy 15.05%

Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
 

http://www.techspot.com/community/topics/having-problems-with-my-dvd-burner.204090/
Relevancy 21.93%

Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.

Is there a way to tell which bios I need or what model I now have?

Thank you,

Steve
 

A:Replaced Failed Motherboard.. now how do I determine model number and which BIOS to download?

Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.

HP Support, Drivers, Contact and Help Forums | HP ® Support
 

http://www.techspot.com/community/topics/replaced-failed-motherboard-now-how-do-i-determine-model-number-and-which-bios-to-download.203956/
Relevancy 24.94%

Hi everyone

Could someone look over what I have and see if there is anything wrong with the list. oo and I have a SSD hard drive already and can someone recommend a CD drive and ram?
thanks in advance

Qty.Product DescriptionSavingsTotal Price
1
ASUS GeForce GTX 770 GTX770-DC2OC-2GD5 Video Card
Item #:N82E16814121770
Return Policy: VGA Replacement Only Return Policy
$399.99
$374.99
1
NVIDIA Gift - Watch Dogs
Item #:N82E16800995199
Return Policy: Standard Return Policy
$69.99
1
Intel Core i7-4770 3.4GHz LGA 1150 Desktop Processor
Item #:N82E16819116900
Return Policy: CPU Replacement Only Return Policy
$338.99
$326.99
1
CORSAIR CSM Series CS750M 750W Power Supply
Item #:N82E16817139061
Return Policy: Standard Return Policy
$129.99
1
ASUS SABERTOOTH Z97 MARK1 ATX Intel Motherboard
Item #:N82E16813132124
Return Policy: Limited Replacement Only Return Policy
$274.99
$254.99
1
NZXT Phantom 410 Series CA-PH410-B1 Black Computer Case With Side Panel Window
Item #:N82E16811146085
Return Policy: Standard Return Policy
$124.99
$104.99
Grand Total:$1,191.95
 

A:First computer build

Holy smokes.

Possibly, no one has commented because 1. people want to hear what you are aiming for - a gaming PC? CAD/CAM? Web-surfing? etc., and 2. you sure piled on a list of pricey items without any argument for why you need such pricey items when you can do nearly as well by sliding down the price range a lot, and 3. you have not said what size the SSD is - it might not be large enough to comfortably support operating system plus a few multi-player games.

A first-time build does not have to be the ultimate Win experience. Largely, builders work for a trade-off between cost and function. For your first build, you may want to build something that is straightforward, not too expensive, and can be upgraded in the future.

If money is no object, just get the most expensive of everything and enjoy. Just make sure everything is compatible.

I am not trying to be rude. Just kinda surprised by the price tags, and the lack of responses thus far.
 

http://www.techspot.com/community/topics/first-computer-build.204008/
Relevancy 33.54%

A recent power outage has caused some of my hardware to function oddly...
My tv's hdmi ports seem to still work for say a ps3, but when hooking up to my gtx 760 I get "No Signal"?
I only have one hdmi port but several other dvi ports. My smaller monitor(plugged into dvi port 1) is functioning normally. It also seems the gpu is still functioning because I booted Dota 2 just fine with 60fps(vsync). Could this outage have fried the hdmi port? Should I be worried, should I return it or just buckle down with 2 dvi connectors? I was gonna test out hdmi to dvi cables to test my theory but am unsure what to do otherwise.

MSI TF/OC 760
TV:NS-39L240A13
 

A:Faulty HDMI port?

Did the pc->tv work before the outage and did the pc suffer immediate power off too?
 

http://www.techspot.com/community/topics/faulty-hdmi-port.203802/
Relevancy 24.08%

Can someone take a look and tell me if this build is OK.

Intel Celeron G1620
MSI H61M-P20 (G3)
AMERA CASE PINK GIRLS MICRO ATX
Could you suggest also some memory and a video card although I already have a GeForce 8600GS, will that card be enough?

Thanks
 

A:Super cheap build for minecraft and youtube

childofthetao said:





Can someone take a look and tell me if this build is OK.

Intel Celeron G1620
MSI H61M-P20 (G3)
AMERA CASE PINK GIRLS MICRO ATX
Could you suggest also some memory and a video card although I already have a GeForce 8600GS, will that card be enough?

ThanksClick to expand...

Minecraft does not need much but it does need a decent CPU (At least a mediocre one) to do a decent FPS on most settings. In my experience changing the settings does not help as much until you get really low on the game (mostly its draw distance that helps) so I would suggest a slightly higher cpu and a low GPU like an R7 250 or and HD 7750.

Try something like this, Im keeping it cheap but you will appreciate minecraft more with a slightly better processor in the end.

Pentium Dual Core 3.0ghz

MSI H81

Corsair 4gb (2x2gb kit) 1600

PowerColor R7 250

XFX 450Watt 80+ Bronze

You can go lower on the GPU if you wish and the PSU selection on that site did not leave me much room but you can go lower. Otherwise the rest is a decent value budget minecraft build which could get a good playable game experience for anyone needing an inexpensive machine.
 

http://www.techspot.com/community/topics/super-cheap-build-for-minecraft-and-youtube.203666/
Relevancy 24.94%

Hi guys I m hoping I could get some advice on a new build I m doing soon It will primarily £1200 Build for MMO Gaming focus on MMOs and Wildstar and WoW absolutely must work on it although it should beast through them Would be nice if other stuff did too though please point out any incompatibilities or things you would do differently Thanks in advance Specs here Case PCS MAELSTROM T BLACK GAMING CASE Processor CPU Intel MMO Gaming Build for £1200 Core i Quad Core Processor i - k MMO Gaming Build for £1200 GHz MB Cache Motherboard Gigabyte Z X Gaming ATX LG USB SATA GBs XFIRE SLI Memory RAM GB KINGSTON HYPER-X BEAST DUAL-DDR MHz X M P x GB Graphics Card GB NVIDIA GEFORCE GTX - DVI HDMI DP - D Vision Ready st Hard Disk GB KINGSTON V SSD SATA Gb MB R MB W nd Hard Disk TB WD CAVIAR BLACK WD FZEX SATA Gb s MB CACHE rpm st DVD BLU-RAY Drive x DUAL LAYER DVD WRITER R RW RAM Memory Card Reader INTERNAL IN CARD READER XD MS CF SD etc x USB PORT Power Supply CORSAIR W RM SERIES MODULAR PLUS GOLD ULTRA QUIET Processor Cooling CoolerMaster Seidon M High Performance Liquid CPU Cooler Sound Card ONBOARD CHANNEL HIGH DEF AUDIO AS STANDARD Wireless Wired Networking WIRELESS N Mbps PCI CARD USB Options MIN x USB amp x USB PORTS BACK PANEL MIN FRONT PORTS Operating System Genuine Windows Bit - inc DVD amp Licence nbsp

A:MMO Gaming Build for £1200

A better ssd, use an air cooler like Noctua D14 or 15, phanteks,stronger psu for future sli or crossfire 750 or 850,something like a 450mbp dual band for wireless or something in the ac wireless class, 8gigs would serve you well but 16 is nice to have. Last but not least I7 for just gaming is really just paying far to much for just gaming. One of the newer I5s would serve just aswell and save you a dollar. While the build would run okay, Its price to performance is grossly off. You are building a overclocker that cant overclock.

http://pcpartpicker.com/user/Freaksamcker/saved/BTwkcf As far as ram wise, the fastest ram within your budget.( 8gigs) Make sure the air cooler will fit in your case.
 

http://www.techspot.com/community/topics/mmo-gaming-build-for-%C2%A31200.203569/
Relevancy 24.08%

Ok I m not the best and building computers and am very new at it My fresh build will boot but display absolutely nothing on the it like except everything Fresh display all powers at should build, no on monitor monitor by nothing I mean it won t even go to bios or turn the power light from standby to on This build will boot up all fans will run with no problems including cpu and video card fans and everything will shut Fresh build, everything powers like it should except no display at all on monitor off by holding down the power button properly Also I have not gotten any light or beep codes Here is what I have asus m a motherboard amd fx -core processor black edition asus gtx ti direct cu video card ddr gb Fresh build, everything powers like it should except no display at all on monitor x gb MHz dual corsair vengeance ram watt xion xio power supply sata tb barracuda hard drive dvd cd - writable drive cm storm scout case I have tried trouble shooting programs for the motherboard and video card with no results I have tried resetting the rtc ram I have double checked the power plugs are plugged in properly and making a proper circuit I have taken everything out except the motherboard cpu cpu fan and power supply and still gotten no beeps I have tried changing how the stupid speaker wire connects connecting incorrectly according to the manual and still no freaking beeps I have tried using hdmi and vga cords connected to my tv that supports pc s and a monitor nothing worked cord wise but my old pc worked like a dream when connected to them when talking to tech support for the motherboard they helped me check that it wasn t a grounding issue I have talked to all my pc buddies called tech support and no one can tell me anything i haven t tried or that has worked I have no idea what is wrong I need help I have spent the last two day all day working on this with no clue what is happening nbsp

A:Fresh build, everything powers like it should except no display at all on monitor

do you have the monitor cable plugged into the GPU or MOBO?
 

http://www.techspot.com/community/topics/fresh-build-everything-powers-like-it-should-except-no-display-at-all-on-monitor.178244/