Windows Support Forum

Temp. Sensor placement

Q: Temp. Sensor placement

I got this new case and it came with a temp. sensor (lcd on front of case). I want to place it on my GPU but I don't know exactly where the best spot would be. Any suggestions?

Relevancy 100%
Preferred Solution: Temp. Sensor placement

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Temp. Sensor placement

?

Need more details.Is this a CPU cooler ?
Anyhow it should have install instructions.
You do mean "CPU" don't you ?

http://www.techspot.com/community/topics/temp-sensor-placement.100218/
Relevancy 80.41%

Quote from Djrafh;How much OC...
well the temp monitor is a little thermal sensor actually on my cpu (between the cpu/heatsink) and its never gone above 41C. So i suppose i could try 3.2 possibly....

This is the first time I ever heard of the actual placement of that little sensor ( I don't get around much any more!)
Anyway ,I was hoping someone could tell me if there is a general
rule as to exactly where & how the heat sensor is to be mounted.
I have built 3- P4's and 1-P3 over the last few years .It's just a hobby for me , but they all work great , but I have never been comfortable as to whether I was getting a proper reading .
Thanx
 

http://www.techspot.com/community/topics/heat-sensor-placement.8691/
Relevancy 78.69%

Hey Just bought the Intel E recently and finally managed to get it working after updating the bios Once it loaded up i checked the temps of the CPU and it at temperature Striker placement Extreme sensor idle it was around degrees This seemed Striker Extreme temperature sensor placement quite high considering i have the Zalman CNPS NT Striker Extreme temperature sensor placement Fan and feeling the fan and the air coming out the back it didn t feel like over at all more like mid s low s after feeling the temps of the E a while ago Ive tried remounting the fan but no difference So after searching other forums i found that theres a few problems with some of the temperature sensor on the chips some peoples reading temperatures of over degrees So what someone was recommending was using an external sensor to monitor it The striker extreme came with three temperature sensor cables and I was wondering where you could put it on the CPU that would give acurate readings but not damage it at all Also the first time i ran the chip on the older bios it reported a temperature of around degrees Thanks nbsp

A:Striker Extreme temperature sensor placement

Temperature you report is normal for idle. The CPU runs hot. 62C is even normal for operation when in use.
 

http://www.techspot.com/community/topics/striker-extreme-temperature-sensor-placement.99296/
Relevancy 67.94%

I purchased a Temp sensor unit to fill a 3.5" empty bay where a floppy was. It has the standard 2 leads with one CPU sensor, and one HD sensor. I was just wondering what the best location is to adhere the HD sensor. I have it taped to the middle of the top and it's reading about 22C which seems low.

I have 2 EIDE hard drives(both WD), the master and slave have a slot between them. With only one lead I put the sensor on the master of course. I realize these things aren't that accurate, just trying to do the best I can.
 

https://forums.techguy.org/threads/hd-temp-sensor.770820/
Relevancy 67.08%

Hello,

My 6800GT's temp reads: 52C (GPU) at idle, i was wondering if my sensor was innaccurate or my card is just running hot.

It sits in a Tsunami Dream, with a Zalman heatsink on it as well as ramsinks and an extra 80mm fan underneath.

Why should my card be so hot? does it matter if it gets hot? Its never artifacted.

Any knowledge is appriciated,

Alex
 

A:my 6800GT's temp sensor

GPUs run a lot hotter than CPUs and chipsets. That temp is actually very good for a 6800GT, and nothing to worry about.

Cheers!
 

http://www.techspot.com/community/topics/my-6800gts-temp-sensor.44128/
Relevancy 67.08%

Hey all A few people here turned me on to the AIDA person system information software and I ve got to say its pretty neat But over in the temp sensor section I can not figure out what the AUX temp sensor is measuring I checked my bios double checked my monitoring program PC alet and even started up fuzzylogic just to see if any of these aux sensor temp AIDA32 had an additional sensor I wasn t aware of Here is my AIDA32 aux temp sensor concern Motherboard temp C F CPU C F AUX C ZIONKS SHAGGY Both the mobo and CPU temps are exactly to PC Alert and are what I expect to see normally By ambient case temp is F just to confuse you a little more Cooling has never really been a concern The hottest by P ever ran was and that was OCd at so I have no idea where is number could of come from but its a little too toasty for my likes Any ideas nbsp

A:AIDA32 aux temp sensor

I assumed that Aux Temp referred to the Power Supply Unit.

Just checked mine :

Mobo - 24 C
CPU - 48 C
Aux - 21 C
 

https://forums.techguy.org/threads/aida32-aux-temp-sensor.133310/
Relevancy 67.08%

OK have read a few web site info about temp sensors most cover desktops and a few touch on laptops Well I have been monitoring the temp of my CPU and I have found the C is the max temp Well not knowing it I play UT on high performance setting and Temp Sensor??? Hardware it reached a high temp of which I think means I either have the wrong sensor reading or AMD doesn't know the top temp cause at I would think I should Hardware Temp Sensor??? have fried my CPU since I was playing for at least mins So I am basicly asking for help on finding the right Temp sensor and program to monitor it and if possible warn Hardware Temp Sensor??? me in some way or put the laptop into sleep mode if it temp reaches to high I have my specs filled out and using Core temp which was recommended to me Also please explain in simple terms please the doctors have me on mg morphine IR and muscles relaxers so I need it simple right now LOL I will try and find the sites I visited if that would help Oh and any info that might be need I will find and post as this heat issue concerns me CPU ID x F revision LG-B VID v -set to high perf vid v set to balanced CPU running Hardware Temp Sensor??? at I think I got my request across the best I could Thanks for reading this and any help I can get

A:Hardware Temp Sensor???

HWMonitor, RealTemp, SpeedFan, are ones I have used. I really don't like speedfan but it's the only one that will read some CPUs I have found. HWMonitor is good but none are always right. None are completely dependable.

http://www.sevenforums.com/hardware-devices/30010-hardware-temp-sensor.html
Relevancy 67.08%

I have an AMD Athlon 64 3200+ processor and when I look at the temps it fluctualates a lot depeneding on if I put it on standby or shut it down. Like when I have it shut down and then start it, it is in the high 30 or low 40 Celcius. And it may go up a bit (tops 50) if I am playing games, but then it comes back down. Now if I take it out of standby (only RAM gets power) it starts at mid 50's (it won't go any lower) and can go up to 60 when playing games. I read somewhere that the sensors don't always work propely so is this the case here?
 

Relevancy 67.08%

Is anyone experience some odd temperature diode changes in SpeedFan?
I have set sensor diode 1,2,3 to thermistor diode, PII diode, thermistor diode. Even though the settings have been saved sometimes the diode setting is changed to a different setting. My memory is not overclocked, but my CPU is and stable. I don't think it's my memory since I have not noticed any similar cases of this with other apps paremeters getting changed.
 

https://forums.techguy.org/threads/speedfan-temp-sensor.618492/
Relevancy 67.08%

Alright so I got a rather strange topic that has been in my head the last couple of years I just never posted or said anything about this on a forum or to someone else I just thought I d finally share it and this place seems to be a great place to find a possible answer to a problem I had with my old system that I was never able to solve Is it possible to actually corrupt a temp sensor possible? is Temp corruption, it CPU sensor reading when using different kinds of temp reading software I know its an odd question I tried doing a google search on this awhile back and i think i found only one thread on another forum where a person actually corrupted his readings Lemme explain I had my old system of xp on an A V I ve had that system for yrs During CPU Temp sensor corruption, is it possible? that time I noticed my temps go slowly higher and higher Despite changing the heatsink with about different kinds of heatsinks and reapplying with many different kinds of thermal materials including AS as well as other AS products I even used thermal padding that came with the HSFs every single re-installation of the HSFs did nothing to the temp readings It always read C no matter what I did I just got so fed up I gave up in trying to lower the temps Whats CPU Temp sensor corruption, is it possible? pretty funny is that during the entire time I was using my xp system I had no problems during those years Surely if those readings were true I would of had problems A C temp reading isn t good if it was real is it Thats not even gaming or during the SUMMMER Yet I had no problems I even gamed when my system was near C one time during the summer with no problems So I think I had a corrupted temp reading on the A V Because in the beginning when I first had it the temps were about C lower the temps started to gradually rise slowly during the years as I started to use a ridiculous amount of temp reading software at the time I first had my system because I was such a nut in terms of cpu temps giddy there were times I accidentally used temp readings by mistake and it would throw the temp readings off so much it would warn me of dangerous readings each temp reader telling me my cpu temps were at unrealistic levels And my voltage and fans were running at one time it read my fans running at digits Now I know what your gonna say I hear it all the time quot Maybe you installed in the HSFs improperly or to much paste not enough paste quot etc etc etc I ve heard it all suspiciou I ve done this so many times I m sure I installed in the HSs fine Heck my temp readings for my new rig is at average C on my first try when I assembled my new system together How can I get the readings on my new system fine with shot while my older system I couldn t fix for years I don t know tell me what you guys think knock nbsp

A:CPU Temp sensor corruption, is it possible?

Since those sensors are probably the type that change electrical conductivity with heat to ascertain a 'temperature', it is a high probability that many do indeed fail over a period of time.

It would not surprise me in the least.



 

http://www.techspot.com/community/topics/cpu-temp-sensor-corruption-is-it-possible.76543/
Relevancy 67.08%

Hey,

I'm just looking at new fan controller with temp sensor. Another one i had was of lower quality but there was a real difference between the CPU temperature on the controller and that in Everest.

So the question is were exactly is the best place to put the CPU sensor. Ive heard its bad to put it in the heat sink of the CPU cooler so were is a good place.

I know you'll say they are just not very reliable but i would like to make it as reliable as possible.

Thanks
 

http://www.techspot.com/community/topics/fan-controller-cpu-temp-sensor.128499/
Relevancy 67.08%

I bought a new case. Pretty good (should be with it's hefty price tag of 65 ($130))

It has a HDD and CPU temperature sensor connected to the front screen. I have two hard drives so I just wedges the HDD sensor between the two hard drive, lovely job.

Where do I poke the CPU sensor to get a reading of CPU temp?

I'm confused

Thanks
-Jack
 

Relevancy 66.22%

I have a Leadtek A250 Ultra ti4600. The manual that came with the card mentions a "Hardware Monitor" that registers temps for the card on the desktop. I downloaded the WinFox program from the installation CD, but cannot access the "Hardware Monitor" program. I tried to find out if that option was available for my card at the Leadtek website, but could not. Do many video cards have this type of feature?

I am assuming that there is not a temp sensor on my video card, but I thought I would ask the through the forum, just to make sure.

Thanks, Al
 

A:Video Card Temp Sensor

Some cards do and some don't. One program that I find will tell you with a fair degree of certainty if it does is Everest: http://www.lavalys.com/products/download.php?pid=1&lang=en&pageid=3
Look under the Computer -> Sensor section for a GPU sensor reading. If you see one then you can try something like Speedfan to see if it'll read it too. Speedfan is really handy provided it reads the sensors you want.
 

https://forums.techguy.org/threads/video-card-temp-sensor.345415/
Relevancy 66.22%

Hi guys, I just picked up a dell OptiPlex 755. I like it but Iv'e had a lot of work to do on it . someone loaded windows 7 over the windows vista it came with but did not finish the job,so I had a lot of fun getting it going. After getting avg on it ,getting explorer 8 updated to 11 ,getting the sp1 and other programs and updates up and going, I changed the ram. it came with just 1 gig of ram and I was lucky to have just the right sticks to upgrade it to 4gigs. Don't worry I checked out the speck before changing the memory, however I now get a message when I start up the computer that it cannot detect the air sensor or the front panel?? also the fan seems to be running fairly hard. can someone explain what might be the problem thx dewitt
 

A:Solved: air temp sensor not detected

Check out the following link and skip to Issue 5.

http://www.dell.com/support/Article/us/en/19/540800/EN
 

https://forums.techguy.org/threads/solved-air-temp-sensor-not-detected.1133884/
Relevancy 65.79%

Like, for example, I could say to alert when a certain sensor goes above 90 degrees? I have SpeedFan, but it's no good for checking that the GPU temp is alright when running a fullscreen game.

Thanks.
 

A:Does anyone know of a program to alert when a temp sensor goes too high?

Hardware monitor has available addons for things like this i think
 

https://forums.techguy.org/threads/does-anyone-know-of-a-program-to-alert-when-a-temp-sensor-goes-too-high.841697/
Relevancy 65.79%

I have the 2N3904 transistor, that used as thermal sensor.Genuine-Lenovo-ThinkCentre-M91P-M73-Temperature-Sensor-Cable-SFF-54Y9922 Genuine-Lenovo-ThinkCentre-...Can somebody give me a pinout of the thermal sensor connector for properly wiring this transistor to the connector?

https://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/thinkcentre-m91p-temp-sensor-pinout/td-p/3383349
Relevancy 42.57%

Hey again guys, I was looking to add some new fans to my case (http://www.ebuyer.com/product/172779) as it only comes with a front 120mm intake, but I'm getting confused with which fans should exhaust and which should intake, I was thinking a 120mm intaking on the side panel, with maybe a 120mm on the back or 140mm on the top exhausting. any suggestions? Many thanks, Alex
 

Relevancy 42.57%

I'm in the market for a new case. I want to transfer my OEM HP into the new case for now and later on buy parts for a build later on down the road. My question is: What is the better position of the PSU, top mount or bottom mount? Does is really matter or is it preference?

A:PSU placement

Originally Posted by bassfisher6522


I'm in the market for a new case. I want to transfer my OEM HP into the new case for now and later on buy parts for a build later on down the road. My question is: What is the better position of the PSU, top mount or bottom mount? Does is really matter or is it preference?



Warm air is less dense so it rises compared to cooler air in the vicinity. Hence, the top of a computer case (or box, or room, or hall) will be warmer than the bottom.

PSUs have an extractor fan. In some machines it's the only extractor fan. Extracting air from the top of the box leads to better cooling because the air being expelled is the warmest air in that container.

If the extractor fan is placed at the bottom of a container, it expels the coolest air, thereby possibly leading to a buildup of higher temperatures at the top.

http://www.vistax64.com/general-discussion/226019-psu-placement.html
Relevancy 42.57%

I have a lian li Pc-61. It has 2 intake fans at the bottom on the front, a exhaust at the back toward the top under the power supply, and a blowhole on the top. The powersupply also blows air out, but it doesnt affect it much due to the power of my other fans. They are all 80mm. But my question is, if i were to add other fans to it, where would be the best place to put them? I was thinking adding a intake to the side, but i dont know if that would mess up the air flow. Also i thought about adding another exhaust fan under my one on the back, but i dont know if that is a good idea, as i hear it is better to keep positive pressure inside the case. Do you guys have any suggestions? Thanks a lot for any comments.
 

A:Fan Placement?

A side panel intake might help keep you cpu or gpu cooler(depending on where you put it). It isn't too hard, but If you have to make the hole, you might have to repaint the case unless you're very careful.
 

http://www.techspot.com/community/topics/fan-placement.30828/
Relevancy 42.57%

I'm using a 4 RIMM motherboard, current in this placement:
64,64 - 64,64
I know RDRAMs have to be installed in pairs (at least in my case I think) but can the two pairs be of different capacity? as in:
64,64 - 256,256
(Upgrading 2 64mb RDRAM to 2 256mb RDRAM)



Oh yah I've a second question. Why is "Intel chipset recommended" when I'm installing my USB ADSL modem?
 

A:RAM placement

Oh I'm sure it will...Try it and see, if it works your system will boot, and the memory test will read "640 MB". If it doesn't, your system just won't boot. There's no real reason why it wouldn't.

Is your DSL modem made by Intel? If not, I don't even know what to say...
 

http://www.techspot.com/community/topics/ram-placement.1716/
Relevancy 42.14%

I just installed a new CPU cooler and now I only have room for three out of four sticks of memory. Two are installed in like-coloured slots for dual channel performance. The sticks are four gigs each. Is it better to leave it at 8 gigs of dual channel RAM, or should I put a third stick in for a total of 12 gigs memory? Will it mess up dual channel performance?

Thanks, gordoncanada
 

A:Memory placement

Make of mobo would be helpful. Some memory is done by slot 1 & 3 then 2 & 4 and some are done by pairs side by side. You can always try it. It will work or not or have no effect. If the system boots you can go to System in Control Panel and see how much ram is detected. If you built your computer, the manual would guide you as to placement of the ram.
 

https://forums.techguy.org/threads/memory-placement.1040516/
Relevancy 42.14%

My charms bar seems a bit off center, is that normal?

I feel sure that it should be in the center of the screen...right?

A:Odd placement of charms bar

Regarding it being centred that is how it should be. If you bring the charms in by putting your cursor top right corner you will notice the icons are nearer the top of the screen and if you do it by placing the cursor bottom right the icons are nearer the bottom of the screen.

I don't know why you can see your wallpaper to the right of the charms bar though.

http://www.eightforums.com/general-support/33340-odd-placement-charms-bar.html
Relevancy 42.14%

Hey everyone, I just upgraded my memory from 512mhz to 1.5 ghz. Pretty big jump.. anyway I was just wondering with SDR ram since it acts like a circuit, and all of the slots have to be taken up, does it matter if the more powerful ram is in the first slot, since the computer goes through all of the ram when it does an operation?
 

https://forums.techguy.org/threads/memory-placement.296600/
Relevancy 42.14%

My comp used to run at 32 - 35 at idle.
With the warm weather, it has risen to 41c.

I don't think that this is a major worry, but I thought I might place a fan pointing at the back of comp to lower temps.

Would that be advisable?

Thanks,

Paul

A:Placement of external fan

Sure but it won't help a thing. The place to point it would be the side air intake or front air intakes and even then you may only see a little decline. Really the 41c is a very modest rise and I would sweat it as they say !

http://www.sevenforums.com/performance-maintenance/288724-placement-external-fan.html
Relevancy 42.14%

hey, have a simple question. My case has three 3.5 inch drives. 1 is only for floppies, one is only for hardrives, and the other is interchangable. I have a second hardrive i want to install. But im not sure if i should. If i do there is like a cm of space between my two hardrives. Will this cause to much heat?
 

A:Hardrive placement

You should be fine providing your PC isn't already running hot.
 

http://www.techspot.com/community/topics/hardrive-placement.15488/
Relevancy 42.14%

I'm going to buy 120mm case fan would it be ok to tape it out on there? My case doesn't have any pins do put a fan into.
I'm also wondering i could maybe place it on bottom panel below my gfx card.
 

A:Fan placement question

czplayer said:



I'm going to buy 120mm case fan would it be ok to tape it out on there? My case doesn't have any slots to put a fan into.
I'm also wondering i could maybe place it on bottom panel below my graphics card.Click to expand...


 

http://www.techspot.com/community/topics/fan-placement-question.95319/
Relevancy 42.14%

Hi,
Just bought a new case, which came with a 350 ps....and a fan installed on the side panel of the case...this case is capable of holding 4 fans in the front, and a 60mm fan in the back....anyway, I was wondering, is a rear fan necessary as there is already a side fan...also, i have an 80mm fan (which will fit the front) from an old computer......should i hook this up? if i do it will be blowing air in, but directly onto my HDD...is this good or bad? thanks
 

Relevancy 42.14%

Hi i m in my final year computer engineering and my campus interviews are approaching. I have mentioned Networks as one of my areas of interest in my resume. Basically i am a good programmer and i have developed some networking applications for my projects and i am currently working on developing a bit torrent client. Well, all i would like to know is, what type of questions will be asked in the placement interviews (MNC's) in the domain of computer networks? what all should i concentrate in, while preparing for the interviews with regard to networking?
 

Relevancy 42.14%

two identical kingston 512mb pc3200 ddr ram sticks. have 4 ram slots on motherboard. does it matter what order or sequence the sticks are put in?
 

A:Ram slot placement

I don't think so...unless you're running DUAL Channel on your board, in which case your manual will tell you exactly which ones.

Not all Motherboards have DUAL Channel, though, so it might not matter.
 

http://www.techspot.com/community/topics/ram-slot-placement.21646/
Relevancy 42.14%

Hi there,

Iam using Windows 8 x64 in Desktop Mode.
Does anyone know if the placement of the volume bar can be changed?
I made a screenshot:
http://i47.tinypic.com/2eqb94z.jpg
the default position is now in win8 in the left upper area. i want it where it always has been, in the right lower corner.

thanks
skraluk

A:Volume Bar Placement

There is a sound bar that is under the Settings charm that is right about where it's always been...

http://www.eightforums.com/customization/15023-volume-bar-placement.html
Relevancy 42.14%

i bought a emachines T2672 with a bad power supply for 25.00 last saturday. i have replaced the power supply and noticed the power led and the power sv and the hdd led have been disconnected. the motherboard is a fic au31-KFM-NF18G. I have no idea where to hook these up to. i know where they go but not which pins to connect them to. any help would be greatly appreciated. fic site is no help at all. thank you. rgh440
 

Relevancy 42.14%

Windows xp - suddenly screen is off center to the left. Nothing I have tried, including "Command Prompt" has gotten it recentered. What should I do?

[email protected]
 

A:Screen placement

Have you tried ajusting the controls on your monitor?
 

https://forums.techguy.org/threads/screen-placement.256736/
Relevancy 42.14%

As I posted in the general hardware thread, I am building a computer and need some help deciding where to place the case fans. The case is a Thermaltake V3, it has a bottom mounted PSU, 2 top fan spaces, 1 bottom fan space, 1 front fan space, and one upper-rear fan space. All are 120mm. The PC isn't going to be doing anything that should make it real hot but I want to make sure its well cooled. I was thinking of just putting a front and rear, but will the spaces in the top and bottom cause circulation issues without fans installed there? I'm building a new pc because my current notebook is failing because the graphics card overheats quickly..so I'm a little paranoid about keeping things cool. :suspiciou
 

A:Help with fan placement in Thermaltake V3

Fans are comparatively cheap, and I err on the side of more airflow is better so i would say fill all of the available fan spaces, or put one more exhausting air than pulling it in for a negative airflow. Its a bit more dusty, but gets more air through the system.
 

http://www.techspot.com/community/topics/help-with-fan-placement-in-thermaltake-v3.155056/
Relevancy 42.14%

if when i open wordpad, wordpad opens as a small window in the center of the screen, is there a way to make it always open on the left side of the screen ?

maybe this can be done in the registry somehow ???
 

A:window placement in win XP

try moving it to where you want it, close it and re-open it.
 

https://forums.techguy.org/threads/window-placement-in-win-xp.496452/
Relevancy 42.14%

Folks, I seem to remember a minor reg hack a while back, couple years maybe, that would change the location of an icon placed on the desktop by creating a shortcut from a web page, a save tmp file icon that's created for a file opened from the desktop such as a Word document, installing a new program, etc.

If I remember you could change a Key or Value in relation to the desktop or screen resolution. I don't know, maybe someone knows something else. Essentiality I'd like to move the default location.

Any ideas ???
 

https://forums.techguy.org/threads/icon-placement.563004/
Relevancy 42.14%

http www newegg com app ViewProductDesc asp description - - amp depa The link above is the case that I currently use for my system with exception of the power supply I currently run a W instead of the W that came with it As the temp has been rising outside and I have to keep my system on top of my desk in fear that my cat will get hair in it But that also means that I have to keep it somewhat close to the window which the sun shines in through the day and it has been heating up in the past few weeks System specs CPU P CGHz M P K HT MB i P IC ABIT ATX Video RADEON PRO M X HD GB WD --- GB Maxtor CD DVD DVD -RW NEC --- Generic Model unknown DVD-ROM Currently I have the standard two fans built into the case going as well as a third fan installed in the front of the system for intake So I ve got an intake on the front one of the left side and the exhaust on the top I used to have the one in the front out the back as exhaust but it seemed that I got better circulation coming from the front Placement Case Fan as intake Case Fan Placement I ve got the two bays on the back that are open and I was thinking of having the bottom bay as a rd intake and the bay above it as exhaust but Case Fan Placement I am not sure what would be the best set up in this situation I also have a th spot in the front next to the rd fan that I can use as well Any ideas on what would be the best set up Case Fan Placement for this I m currently running case temp around F idle and between - F during high usage and CPU temp runs around F idle - F during usage All of these temps are about - F warmer than they have been in the past because of the heat outside The temps seem okay still but I would love to get this to run cooler I ve been looking into water cooled systems as well but I m concerned about that whole quot water in my computer quot thing Not only that if I were go get one I d go high end and be spending about on it Would be adding a fan or two make this better and if so any suggestions on what to buy I appreciate any suggestions thanks nbsp

A:Case Fan Placement

Hello and welcome to Techspot.

If you can`t move the tower to a cooler location then maybe getting some blinds for the window in question would help a lot.

No matter how many case fans you employ, if your tower is in direct sunlight it`s going to get hot.

Regards Howard :wave: :wave:
 

http://www.techspot.com/community/topics/case-fan-placement.24140/
Relevancy 42.14%

I have a header in site www.palcus.org and in Firefox it does not shift the 55px as it does in IE. how to fix it?

i want the drop down menu to be dircetly below the header.

thanks

aveiro

A:placement of header

I'm not quite sure how you'd do it with your setup, but if all else fails, you can use a javascript pop-up menu, and set the 'x' value to zero. If you want to try it out and would like the code for this, or instructions on how to do it in dreamweaver, I'd be happy to supply them. Its not exactly what you wanted, but its better than nothing :)

http://www.techsupportforum.com/forums/f131/placement-of-header-57338.html
Relevancy 41.71%

What does this mean:  C:\Users\Ted\AppData\Local\Temp\ScrC777.temp\_FRBatch.pac was not found, and how can I resolve it?
I usually see it on start up  after "sleep".
Thanks

A: C:\Users\Ted\AppData\Local\Temp\ScrC777.temp\_FRBatch.pac was not found

Hi TedRayWesty,
When your computer ?wake up? from ?sleep? mode, the RAM will be able to respond to a wake-up event and calling files for program. There might be a calling failure. I searched about your temp folder name and the temp file name and seems like it is not a system
file and it is called by some third party software.
Try following steps to resolve your issue
Please perform a clean boot and see if the issue still persist.
Check the other contents in ScrC777.temp folder see if you could identify the software.(seems like some Security Software or Anti-Spyware)
Uninstall it and delete the temp folder see what happens.
About clean boot in Windows 7
https://support.microsoft.com/kb/929135/en-us?wa=wsignin1.0
Regards

https://social.technet.microsoft.com/Forums/en-US/267bec6d-7d8c-44c4-a88f-ed5a07801b7f/cuserstedappdatalocaltempscrc777tempfrbatchpac-was-not-found?forum=w8itprogeneral
Relevancy 41.71%

Here is my log Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Windows XP SP WinNT MSIE Internet Explorer v SP Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system spoolsv exe C WINDOWS Explorer EXE C WINDOWS system hkcmd exe C WINDOWS system igfxpers exe C Program Files Java j re bin jusched exe C WINDOWS stsystra exe C Program Files CyberLink PowerDVD DVDLauncher exe C Program Files Java j re bin jucheck exe C Program Files Real RealPlayer RealPlay exe C WINDOWS system dla tfswctrl exe C Program Files Common Files InstallShield UpdateService issch exe C PROGRA MUSICM MUSICM mm tray exe C Program Files McAfee com VSO oasclnt exe C PROGRA McAfee SPAMKI MSKAgent exe C PROGRA MUSICM MUSICM MMDiag exe c program files mcafee com agent mcdetect exe C Program Files Corel Corel Photo Album MediaDetect exe c PROGRA mcafee com vso mcshield exe C PROGRA mcafee com vso mcvsshld exe c PROGRA mcafee com agent mctskshd exe c progra mcafee com vso mcvsescn exe C Program Files MUSICMATCH Musicmatch Jukebox mim exe C PROGRA McAfee com PERSON MpfTray exe C PROGRA McAfee com PERSON MpfService exe C PROGRA McAfee com PERSON MpfAgent exe C PROGRA McAfee SPAMKI MSKSrvr exe c PROGRA mcafee com vso mcmnhdlr exe C WINDOWS system svchost exe C WINDOWS System svchost exe C WINDOWS system wuauclt exe C Program Files Internet Explorer iexplore exe C Program Files Trend Micro HijackThis HijackThis exe C Program Files Internet Explorer iexplore exe C Program Files DellSupport DSAgnt exe C WINDOWS system wscntfy exe R - HKCU Software Microsoft Internet Explorer Main Default Page URL http www dell me com mywaybiz R - HKCU Software ~DFCA9F.tmp and folder and I %temp% delete i cant in have files JETBBAE.temp these my Microsoft Internet Explorer Main Search Bar http mysearch myway com jsp dellsidebar jsp p DE R - HKCU Software Microsoft Internet Explorer Main Start Page http www dell me com mywaybiz R - HKLM Software Microsoft Internet Explorer Main Default Page URL http www dell me I have these files in my %temp% folder JETBBAE.temp and ~DFCA9F.tmp and i cant delete com mywaybiz R - HKLM Software Microsoft Internet Explorer Main Start Page http www dell me com mywaybiz R - URLSearchHook no name - D F -B FE- -BF - AB D D - C Program Files MyWaySA SrchAsDe deSrcAs dll O - BHO AcroIEHlprObj Class - E F-C D - D -B D- B I have these files in my %temp% folder JETBBAE.temp and ~DFCA9F.tmp and i cant delete D BE B - C Program Files Adobe Acrobat Reader ActiveX AcroIEHelper dll O - I have these files in my %temp% folder JETBBAE.temp and ~DFCA9F.tmp and i cant delete BHO McAfee Anti-Phishing Filter - D ED - CFF- - A - EBB AF - c program files mcafee spamkiller mcapfbho dll O - BHO no name - D F -B FE- -BF - AB D D - C Program Files MyWaySA SrchAsDe deSrcAs dll O - BHO DriveLetterAccess - CA D E- - CF- E - - C WINDOWS system dla tfswshx dll O - Toolbar McAfee VirusScan - BA B -B - c -B - F F - c progra mcafee com vso mcvsshl dll O - HKLM Run igfxtray C WINDOWS system igfxtray exe O - HKLM Run igfxhkcmd C WINDOWS system hkcmd exe O - HKLM Run igfxpers C WINDOWS system igfxpers exe O - HKLM Run SunJavaUpdateSched C Program Files Java j re bin jusched exe O - HKLM Run SigmatelSysTrayApp stsystra exe O - HKLM Run DVDLauncher quot C Program Files CyberLink PowerDVD DVDLauncher exe quot O - HKLM Run RealTray C Program Files Real RealPlayer RealPlay exe SYSTEMBOOTHIDEPLAYER O - HKLM Run QuickTime Task quot C Program Files QuickTime qttask exe quot -atboottime O - HKLM Run QBReminderFlash quot C Program Files Intuit QuickBooks Atom QBReminder exe quot O - HKLM Run dla C WINDOWS system dla tfswctrl exe O - HKLM Run ISUSPM Startup quot C Program Files Common Files InstallShield UpdateService isuspm exe quot -startup O - HKLM Run ISUSScheduler quot C Program Files Common Files InstallShield UpdateSe... Read more

A:I have these files in my %temp% folder JETBBAE.temp and ~DFCA9F.tmp and i cant delete

* Click here to download ATF Cleaner by Atribune and save it to your desktop.
Double-click ATF-Cleaner.exe to run the program.

Under Main choose: Select All

Click the Empty Selected button.
If you use Firefox:
Click Firefox at the top and choose: Select All

Click the Empty Selected button.

NOTE: If you would like to keep your saved passwords, please click No at the prompt.

If you use Opera:
Click Opera at the top and choose: Select All

Click the Empty Selected button.

[*]NOTE: If you would like to keep your saved passwords, please click No at the prompt.

Click Exit on the Main menu to close the program.
 

https://forums.techguy.org/threads/i-have-these-files-in-my-temp-folder-jetbbae-temp-and-dfca9f-tmp-and-i-cant-delete.622328/
Relevancy 41.71%

CPU not showing temp in Open hardware monitor or core temp

Used to show ok, I am certain...In the BIOS when I boot the PC it shows ok approx 60-65oC

But not in the aforementioned apps....cant think why

Thanks

A:CPU not showing temp in Open hardware monitor or core temp

Those programs are not reliable for AMD platform, This AMD OverDrive? Technology should give you much better look at what's going on. For temperatures look at "Temperature margin" Higher, the better at 10c or so it will start throttling like crazy. It also provides many more details than any other monitoring program.

http://www.tenforums.com/drivers-hardware/36372-cpu-not-showing-temp-open-hardware-monitor-core-temp.html
Relevancy 41.71%

CPU not showing temp in Open hardware monitor or core temp

Used to show ok, I am certain...In the BIOS when I boot the PC it shows ok approx 60-65oC

But not in the aforementioned apps....cant think why

Thanks

A:CPU not showing temp in Open hardware monitor or core temp

Those programs are not reliable for AMD platform, This AMD OverDrive? Technology should give you much better look at what's going on. For temperatures look at "Temperature margin" Higher, the better at 10c or so it will start throttling like crazy. It also provides many more details than any other monitoring program.

http://www.tenforums.com/general-discussion/36372-cpu-not-showing-temp-open-hardware-monitor-core-temp.html
Relevancy 41.71%

I have an XPS 15 9550 with Windows 10. There is a feature I don't even know how it's called or if it's a Windows feature.
When trying to move a window, a hover appears that 'helps' place the window in an area of the screen. What is this feature and how does one turn it off?
Edit: It is not snap assist, I turned that feature off. Initially I added a screen print to the post, this time I attached it a .jpeg. Please check attachment.
I appreciate the suggestions.

A:XPS 15 window placement hover

Sounds like you're talking about "snap assist"?
Do a Google search on:
windows 10 disable snap assist
Good Luck!

http://en.community.dell.com/support-forums/software-os/f/4997/t/19681408
Relevancy 41.71%

i have recently purchsed the aerocool easy watch fan contoller and moniter but i am not sure where to place the little thermo-meter on the unit. I want to have one measuring my cpu temp one measuring my GPU temp and one measuring my HDD temp Where would i place the threee probes for this??


(me)
 

A:CPU thermo-meter placement???

I looked up this system and am glad to know about it. The page I was reading explained clearly where to place these probes.
 

http://www.techspot.com/community/topics/cpu-thermo-meter-placement.93803/
Relevancy 41.71%

I was trying to use the window placement commands found on the right click task bar menu, specifically "Show Windows Side by Side" and found that Google Chrome windows do not respond to the command. Problem does not occur with IE or Firefox. Anyone familiar with this behavior?

Example: If I have a Word window,a Chrome window and a Folder window open and select "Show Windows Side by Side" I get two windows (Word and Folder) with Chrome hidden behind them.

http://www.vistax64.com/browsers-mail/264824-chrome-window-placement.html
Relevancy 41.71%

Left hinge of my laptop is placed reverse in manner. Keyboard side end is attached to display end and vice versa. Simply looking different from the right hinge. What do I do now. Thanks in advance!

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Wrong-Hinge-Placement/td-p/5631297
Relevancy 41.71%

Tech CMOS battery placement Support Guy System Info Utility version OS Version Microsoft Windows XP Home Edition Service Pack bit Processor Intel R Pentium R CPU GHz x Family Model Stepping Processor Count RAM Mb Graphics Card Intel R G GV GL Express Chipset Family Mb Hard Drives C Total - MB Free - MB Motherboard ASUSTeK Computer INC Goldfish Antivirus McAfee Anti-Virus and Anti-Spyware Updated Yes On-Demand Scanner Enabled I reciently removed the RTC to check voltage and didn t notice CMOS battery placement polarity position in the vertical rack it goes into I installed it with the negative side facing right I havent noticed any problems I did look at motherboards online and an Asus website that only had an educated guess CMOS battery placement answer one stating right and another left Looking for some information and peace of mind Just spent an hour and a half more looking at motherboards and after blowing up as large as possible I noticed a casted into the upper and lower right hand plastic form that would probably hold the face of the battery off the contacts Still looking nbsp

A:CMOS battery placement

Hi CollinsMachine and welcome to TSG.

The battery holders are designed so the battery will only fit properly one way around so I think you're ok.
 

https://forums.techguy.org/threads/cmos-battery-placement.1137999/
Relevancy 41.71%

I am using xp home and Xp pro and would like to have a program's window
to always open at a certain position on he desktop. I have a small program that has a window approx. 2.5x6 inches in size when opened.
I would like for it always open in the right lower section of the desktop.

Thanks very much,
rar10125
 

A:window placement on desktop

Windows should remember the last place it was closed and open it from there. I believe it is just like Internet Explorer's window size and placement. I may be wrong. Open up your task manager and move it. Then close it. It should open up in the same position.
The software may have a built in placement on a given screen resolution. I know programs like WeatherBug work this way.
 

https://forums.techguy.org/threads/window-placement-on-desktop.729802/
Relevancy 41.71%

How can I place a header on an Excel document? I only want it to show up on the first page, not the entire document.

Thank you.

------------------
"There are no stupid questions, just stupid people." -- Mr. Garrison on South Park
 

A:Excel Header placement

May I then suggest this workaround:

Take row one of the worksheet. Drag the row so that it is, say, 1" high. Using the drawing toolbar, click on the textbox tool and put your header above the data in row 1 using a textbox. You'll have to check print preview a couple times, I suppose, to make sure you've placed it properly.

~dreamboat~
Brainbench MVP for Microsoft Word http://www.brainbench.com

------------------
~dreamboat~
Brainbench MVP for Microsoft Word
Brainbench
 

https://forums.techguy.org/threads/excel-header-placement.37817/
Relevancy 41.71%

Hey, I've had a look around the net and found nothing so I'm guessing this isn't possible but I'll ask incase any of you have some tricks up your sleeves.

Is there any way I can "lock" file placements within a folder? The situation is basically a woman in my office needs her files in date order (but obviously when backups are restored etc, the creation date is changed so that isn't an option) so I have to manually place them myself to allow her to skim through looking for the correct dates.

Is there any way to guarantee the placement of these files will stay that way?

Thanks in advance.

Nicky.

A:File placement lock?

The order files are stored in a folder is determined by it's name and this cannot be changed. Windows Explorer allows you to show files sorted by name, date, size, etc. You cannot override this for specific files.

http://www.techsupportforum.com/forums/f10/file-placement-lock-553500.html
Relevancy 41.71%

I know that icons for the desktop are stored in the Desktop folder. But where is the placement information stored? Each time I boot the computer the desktop icons are just where I left them.

A:Desktop icon placement

  
Quote: Originally Posted by blockie


I know that icons for the desktop are stored in the Desktop folder. But where is the placement information stored? Each time I boot the computer the desktop icons are just where I left them.


1) Open Windows Explorer
2) Navigate to you user folder:

3) Right-click on "Desktop", then select "Properties"
4) Click the "Location" Tab
4) Click "Find Target":

Or, you can just navigate to C:\Users\[YOU_USER_NAME]\Desktop

http://www.sevenforums.com/general-discussion/130045-desktop-icon-placement.html
Relevancy 41.71%

in my first 2 slots i have 2x 512 mb sticks of ram in the second i have 2x 1gb sticks of ram is this ok?
 

Relevancy 41.71%

Does anyone know where Windows keeps track of your Icon placement on your desktop. I am wondering if it is stored in your user profile or in the Registry.
 

A:Desktop Icon placement

Maybe this will help. http://www.windowsnetworking.com/kb...Tips/Customization/SaveDesktopIconLayout.html
 

https://forums.techguy.org/threads/desktop-icon-placement.255308/
Relevancy 41.71%

I have been building computers for years and never found a reason for the placement of the memory slots on a motherboard. If you look at a board that uses an Intel CPU, the slots used are1-3 and/or 2-4. If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4. Does anybody know why this is? No, I'm not trying to make a better motherboard, I'm just curious enough to finally ask.

Thanks for any info anyone can give.
 

A:Memory slot placement

'If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4.'

refer to the MSI K9N - which see;

http://www.bosamar.com/K9N/review.html

Dual channel with slots 1/3 or 2/4.

Assuming that you installed 2 Gb in 4 modules of dual channel ram and it is used from byte 0 to 2047 linearly, then assuming that the average 2 Gb ram install running XP uses about 50% of the Ram running avg8 (as example), you would get heating in ram modules 1 and 3 and none to speak of in 2 and 4.

Thus, heat separated components and better cooling.

My opinion.
 

http://www.techspot.com/community/topics/memory-slot-placement.114983/
Relevancy 41.71%

Hey everyone. I'm having a problem where the toolbar placement in Internet Explorer 7 keeps on resetting to its default settings whenever I close the window. This is a problem because, for example, the SiteAdvisor button keeps on being placed in its own row. I'd like to place it on the menu bar row, but every time I place it there, the placement is reset in any new IE window I open.

Anyone have any ideas on how to fix this?

http://www.techsupportforum.com/forums/f56/ie7-toolbar-placement-keeps-on-resetting-194158.html
Relevancy 41.71%

I have two XP boxes running XP SP3. Both have some legacy software I want to access from time to time. One box blew the motherboard (several bulged and leaking caps), and I have been told that if I can find an identical board the system will still boot from the HD (it is in good condition, I have recovered some files from it). The blown board is an Intel D865 GLC/D865 PESO, but most re-furbed boards are D865 GLC/D865 PESO/D865 PCD, or some such. Will any D865 GLC/whatever board be recognised, or do I have to find an exact match?
 

A:Solved: mobo re-placement

It'll likely boot on any motherboard with the same or even similar Intel chipset so another Intel D865 board should work.
 

https://forums.techguy.org/threads/solved-mobo-re-placement.1123254/
Relevancy 41.71%

Hello. Due party to FIC's subpar online manual, I have
to ask if anyone out there has any direct experience with
either FIC or the AZ11 Socket A board. The goofy at best
online manual is not clear at all as to just where the pw wire
(both leds too) goes. My guess is the 3rd and 4th pins from top
on the right side of connector.

Anyone have an AZ 11 manual
-M
 

https://forums.techguy.org/threads/fic-az11-pw-wire-placement.390492/
Relevancy 41.71%

Best Campus drive training programme in Coimbatore, placed last 12 years so best platform for job seekers to find the best Campus drive program for fresher. Campus placement in coimbatore

http://www.computerhope.com/forum/index.php/topic,158244.0.html
Relevancy 41.71%

I want to create a home network:
modem - Motorola SB 6180, from COX Communication
router - ASUS RT-AC-66U
gigabit switch - TP-LINK TL-SG1005D 10/100/1000Mbps Unmanaged
printer - HP LaserJet Pro 200 color with ethernet port
2 desktops, each running Win 8 Prox64
Cat 6 cables.

Plan A:
Cat 6 cable from modem to router
Cat 6 cable from router to switch
Cat 6 cables from switch to printer and desktops

I think this will give me wifi for my laptop and good connection speed between computers and printer.
But I could be wrong........

Suggestions appreciated.

A:Network component placement

Just a comment on the modem selection. I have an SB6120 modem that simply flies. So, if the SB6180 is an improved version, I think you have made a great choice.

http://www.eightforums.com/network-sharing/28527-network-component-placement.html
Relevancy 41.71%

Hi,

I have just ordered the Logitech Z-5500 Speakers. I have read many comments about this set, and noticed that alot of people say that you have to keep the sub at least 60cm away from electronic devices, like CRT Monitors. I was just wondering if it would be safe to put it in the range of a printer, and if not, how would it actually effect it?

Thanks
 

A:Z-5500 speaker placement

It's not going to affect the printer...

Unless you like to really crank the woofer to where it's causing other things to vibrate uncontrollably nothing will happen. Sometimes audio devices like to interfere with 2.4Ghz wireless devices though so if you notice some static I might rearrange your setup to compensate.
 

http://www.techspot.com/community/topics/z-5500-speaker-placement.139797/
Relevancy 41.71%

Hiya

I'm running IE8 on Windows XP 32 bit. I use Google as my home page. But I'm annoyed that IE8 doesn't place the cursor in the Google search bar automatically upon starting IE8 or opening a new tab, like it does in Chrome and Firefox. I constantly find myself typing words only to find they didn't turn up on screen, because I didn't manually use my mouse button to place the cursor in the Google search field before typing.

Do anyone know if there is a way to fix this and 'force' IE8 to automatically place the cursor in the text field by default?

Thanks in advance.

A:[SOLVED] IE8 cursor placement

Nevermind, I figured it out. Turning off "Google Instant" did the trick.

http://www.techsupportforum.com/forums/f56/solved-ie8-cursor-placement-596580.html
Relevancy 41.28%

I know there are posts against Temp in and but no location 'Temp' of Variables 'TMP' Changed files? and posts for this tweak for relocating the TMP and Temp files in Variables but more posts say to relocate it OFF an SSD Changed location of 'TMP' and 'Temp' in Variables but no Temp files? drive My Computer is fairly new running OS Windows Premium Bit on a gig SSD with tet disk drive for data I created a folder on my D Disk Changed location of 'TMP' and 'Temp' in Variables but no Temp files? drive called D Windows Temp Files - then went to Advanced system Variables and edited the locations of both my TMP and Temp Rebooted right away and now it's been over a month but nothing is vissable in the new folder Changed location of 'TMP' and 'Temp' in Variables but no Temp files? all Hidden and System files are enabled in view My computer updates etc etc are running fine I checked the new Variable settings I edited and they are both still there D Windows Temp Files If I remember correctly I think the default use to be user profile appdata local temp lt but I'm not possitive Can someone answer a quick question Thanks Bobkoz Shouldn't I be seeing them in the new folder

http://www.sevenforums.com/performance-maintenance/381724-changed-location-tmp-temp-variables-but-no-temp-files.html
Relevancy 41.28%

I've got some Icons that I want to pin to the taskbar (eg Exel & Libraries).

I want them to stay furthest left near the start button (just as they did in WIN XP fast launch area).

But, as I open other programs in WIN 7 these Icons move and others get inserted to their left. How can I stop this and emmulate the WIN XP fast launch toolbar behavior?

A:Fixed Taskbar Icon Placement

Hi Poolmon, you can enable the Quick Launch if you like.

http://www.sevenforums.com/customization/16897-fixed-taskbar-icon-placement.html
Relevancy 41.28%

When I retired (23 weeks ago) I bought a PC that would probably last me the rest of my life. So I've ended up with a quad-core system with 16Gb RAM, a 128Gb SSD C: drive and a fast 1Tb D: drive.

I just discovered that I have an 18Gb C:\pagefile.sys and started wondering about the pros and cons of having this paging file on my SSD C: drive.

Given that I have 16Gb RAM, I could probably get away with no page file at all. I could certainly manage with the pagefile entirely on the "traditional" D: drive.

Are there any guidelines on pagefile placement in the SSD era?

A:Pagefile placement on system booting from SSD

SSD's want to have their # write operations minimized. So you migrate things that do a lot of writing to your HDD and get them off the SSD. In particular, Page, Hibernate, Temp/TMP, things like cache folders used by different programs, etc. can be easily moved to your HDD.

About the page file specifically - I ran for a couple of years with no page file and only 6GB RAM. I have 8 now and still no page file. So you are correct - you probably don't need it.

http://www.sevenforums.com/performance-maintenance/278231-pagefile-placement-system-booting-ssd.html
Relevancy 41.28%

I have - placement Multi-monitor icon a setup with three monitors using the one in the middle as the primary one It seems that I can't place icons in the lowest row of the primary monitor as they will snap and jump to the Multi-monitor - icon placement row above it If there is another icon above it this icons kinda gets in the way and prevents the problem from occuring It works fine on my other monitors as there is no taskbar there For some reason this behavior only occurs when there is a monitor to the left of the primary one and I've noticed the same thing in Windows XP The system seems to adjust the bottom of the icon space to work with the leftmost monitor Is there any way I can fix this Adjusting icon spacing won't help Also is there any tool to backup and restore my icon layout that works in Win and not just XP It gets messed up when i switch from extended desktop to AMD Eyefinity mode and vice versa

A:Multi-monitor - icon placement

Welcome to SF!

Right-click on an empty spot on your Desk Top.
On the menu that opens hover on View
If Auto-arrange Icons is checked, then click it once

You should now be able to place your icons anywhere you like.

http://www.sevenforums.com/general-discussion/131836-multi-monitor-icon-placement.html
Relevancy 41.28%

Hi I have four hard disks and three operating systems Windows Ubuntu and Fedora and I want advice on partitioning the disks In my opinion I have two options Install all the operating systems on one hard disk since only one partition will be in use at a time and use the other three for different purposes like download storage media storage and Virtualbox disk file storage etc Potential Advantage that the OSes can have concurrent access for different jobs e g Virtualbox download and media-serving activities simultaneously more space for the data partitions Potential Disadvantage the OSes installed in the latter part of the OS disk will be lower in performance Install the OSes Performance Placement Partition Effect on of at the beginning of three of the disks and the other data partitions on the remaining part of the disks Potential Advantage Better performance of all the OSes in general Potential Disadvantage Lesser space for data partitions How do you think I should use the disk How much benchmark results statistics will be very helpful of an impact does the placement at the beginning or at the end of a hard disk partition has on performance

A:Effect of Partition Placement on Performance

It had a lot more impact in the past when we were dealing with slower drives, IDE controllers, and 33 or 66Mhz system buses. But with modern systems there is very little real-life performance gains from drive position, even with mechanical spinning hard drives.

I am sure that the speed difference is still there and could be picked up by benchmark software, but the difference in today's machines would be measured in milliseconds, not full seconds.

I used to set up a small partition in the beginning of a second hard drive just to use as a page file in order to boost performance (which seemed to make a noticeable difference at the time. But I did the same thing on my new machine when I first set it up and it made no difference at all. With the speed of today's hardware it is just splitting hairs, IMHO.

http://www.sevenforums.com/hardware-devices/223390-effect-partition-placement-performance.html
Relevancy 41.28%

Hello all As this is my first post on this site I would like to apologise in advanced for anything that I've not abided by I've got a quick and simple question that may or may not be solvable Below I've posted Placement Windows Start Menu 7 a picture if you've found it hard to understand what I'm trying to ask or if you just want the quick version So what I'm asking for is how can I reposition my Start Menu The reason for this is when I relocate my Task Bar there's a small gap between the edge of the screen and the Start Menu Either that or it's blocking view I'm only wanting to change this for an aesthetics point of view as I don't see it increasing productivity Windows 7 Start Menu Placement or benefiting in any such way other than Windows 7 Start Menu Placement to look nice Clean https www dropbox com s e hc ufqq uj Clean png What it looks like https www dropbox com s qyjcdqhk s art Menu png What I want it to look like https www dropbox com s c p rwoid ook Like png

A:Windows 7 Start Menu Placement

Classic Shell has an option for that (Show next to taskbar), however it replaces the whole menu. After some customization you can get it real close to the standard Windows 7 menu though.

http://www.sevenforums.com/customization/237177-windows-7-start-menu-placement.html
Relevancy 41.28%

I Low Level Write 's formatted my computer on Monday via Wester Digital Data Lifeguard for a fresh reinstall as my computer was slowing to a crawl I have x GB Sata Windows main drive x TB Sata for games music pictures ect x GB IDE drive for documents x DVD-RW Twins Same LG name model color speed ect x in Card reader Similar but not exact - gt http products ncix com detail ngea d-aa- htm I pulled all drives except the in card reader which hooks to on-motherboard USB plugs before formatting and reinstalling Windows Ultimate and some programs Some of my setup files are on the TB so I plugged that back in when it was needed Disk which Placement not Disk holding Management is SUPPOSED to be the GB Windows Drive and the TB media drive is SUPPOSED to be Disk sometimes switch places between Disk and Disk then becoming like it was before the format but will eventually go back The DVD drives I have are brand new as I bought them especially for the reinstall as the lasers in Disk Management Placement not holding my old ones were on they way out anyways Now that the DVD drives are installed I cannot get it to even randomly switch back TB Drive D seems stuck on Disk and the GB Windows drive seems stuck on Disk One thing I seemed to notice last night though I cannot replicate the problem today is when I restarted the computer if I immediately went to disk management after logging into Windows it would be switched up but if I restart log into windows and let it sit for a minute or two before checking Disk management and if I let it sit THEN things will show up in the right order in regards to C and D Restart again and immediately go to disk management without waiting and things are switched up again lt -- That test was done wile the DVD drives were NOT hooked up IT SHOULD BE IN THIS ORDER C - gt Disk GB SATA Windows D - gt Disk TB SATA Media Drive E - gt Disk GB IDE Document drive This drive is still disconnected and not been rehooked back in yet F - gt DVD Drive G - gt DVD Drive Disk Removeable Disk Disk Removeable Disk Disk Removeable Disk Disk Removeable Disk is not showing because the GB IDE is not hooked back up yet I tried changing the drive letters in hopping Disk Management could put the lowest drive letter at the lowest disk number and that did not work I have been messing with this for over days now and am honestly starting to get a little pi ed off now and don't know how much more start-shut down----power up my computer can handle while I switch plugs around I must have shutdown amp restarted it at least - times last night and I want to stop with the power cycles now Time to ask What do I need to do to get my drives in the right order in disk management and KEEP HOLD FREEZE FORCE them in position so they do now change places All I can think of now is there is some switch in windows or BIOS or some key in the registry that needs to be adjusted Can someone tell me what to change or adjust because this issue is starting to get REAL old now My motherboard is a ASUS P Q pro Turbo w gb RAM Edit One thing I just realized is that I have a quot System Reserved quot partition that is still sitting there I remember from my last format I got rid of that reserved bit with Partition Magic or some program like that it was over years ago This time I did not remove that System Reserved and let it sit I wonder if that might have anything to do with it

A:Disk Management Placement not holding

Disk drive numbers may not correspond to the SATA channel numbers when you install Windows on a computer that has multiple SATA or RAID disks






Quote:
E: -> Disk 2 = 320 GB IDE Document drive (This drive is still disconnected and not been rehooked back in yet)


When refitted the IDE HDD may show as Disk 0.

http://www.sevenforums.com/installation-setup/324324-disk-management-placement-not-holding.html
Relevancy 41.28%

Appreciate some assistance.

Some pc builders recommend the video card(not AGP) be placed on the PCI slot nearest to the power supply. Anyone know the rationale for this?
 

A:PCI Slot/Video Card Placement

That seems to be the most popular slot for the highest priority devices during "bus arbitration". Since video or graphics require the most from system resources it's best to give them the highest priority when they are negotiating for control of the PCI bus. But, the specification doesn't require that, so a designer could assign any PCI slot to have the highest priority if he/she wanted to.
 

https://forums.techguy.org/threads/pci-slot-video-card-placement.41084/
Relevancy 41.28%

I am wondering if anyone has heard of the following problem, and if the cicache.exe is necessary?

After boot, or log off then on, my custom icon placement on the desktop are all reset to the left. I tried very reg/fix I could find with no luck!
smilie

So I started shutting startup progs down. Finally the Cicache.exe is the culprit. The only thing I could find on this file is that it has something to do with my card reader.

Anyone know what it does, or if it is necessary? My reader seems to work, though I may at times have to unplug then plug in to get the drives to showup in My Comp. This was an intermittent problem before shutting down cicache though.

A:Desktop Icon Placement & Cicache.exe

Please perform a free online scan of your system here (requires Internet Explorer): http://housecall.trendmicro.com/I suspect that the Cicache program may be a virus or spyware.

http://www.bleepingcomputer.com/forums/t/42932/desktop-icon-placement-cicacheexe/
Relevancy 41.28%

Windows forgets my icon placement on the desktop when I restart the pc or exit some games. Some of of us have no icons on our desktop, some of us have 50. Maybe it's not necessarily Windows fault, could be nVidia but either way I would think by now there should be a way to save your icon placement regardless. I've never had this problem with any other OS, just Windows. I requested it on several occasions through feedback but still has not been considered or implemented which makes me wonder if it's even worth Microsofts time since I never get any replies back. I just sent another request and hope Microsoft will listen. If there is a way to fix it, appreciate to hear any reasonable way to do it. Thanks.

A:Losing desktop icon placement.

Ok, so I guess nobody knows how to fix this issue. I know I am not the only one, google gives over 10 pages of hits on this problem.

http://www.sevenforums.com/general-discussion/9970-losing-desktop-icon-placement.html
Relevancy 41.28%

I just recently built my new system see Fans Placement / Adding Thermometer specs and Thermometer Placement / Adding Fans the case came with a wired temp gauge I was told that there is a part of your motherboard that can hold this for an accurate reading of the GPU temp is this true And if so where would i be able to find this Heres the case APEVIA X-CRUISER-BK Black Steel ATX Mid Tower Computer Case - Retail Im also looking at adding additional fans to this case There is room up front for mm and it came with one mm on top and in back How can I tell which is useed for exaust and which one blows in the case Their seems to be air coming out of both sides equally If there is a way to distinguish sorry for so many questions what would be my best setup for having mm fan in back mm on top and mm in front as far as having some blow in and some be exaust I wouold think the top one should be the outtake but I dont know never dealt with this before Also you can probably guess by my specs that Im a heavy gamer So i do need to get these fans in there asap Thanks for taking the time to read this Be well friends nbsp

Relevancy 41.28%

Hi all

I have prepared a double-sided iinvitation, using Corel Printhouse Magic. {Yes I know it's old, but it works for me! LOL}

I want to print 2 or maybe even 3 per page, but when I hit print. the only placement offering I get, is "as is" or "full page." If the project is small, like a tag or a bookmark, you get the offer of "multiple copies per page". I could easily get 2 per page - perhaps 3, but I just can't get there. I've looked at all printer options and all Corel options.

It's Corel PrintHouse Magic 3 and the printer is an HP Deskjet 5150.

Bleat bleat : HELP!

Thanks

MoreProblems
(Larry)
 

https://forums.techguy.org/threads/corel-printhouse-image-placement.720120/
Relevancy 41.28%

In Word 2003 when you pressed the Alt key you could place WordArt anywhere you wanted without having it snap to a grid. I now have Word 2007 and find that I've lost that feature. Is there a solution?
 

A:Placement of WordArt in Word problem

You can turn off the snapping here:

1. Select the WordArt so that the 'WordArt Tools' 'Format' tab shows up on your ribbon. Click there.

2. Click 'Align', then 'Grid Settings...'.

3. Here you can uncheck 'Snap objects to other objects' and/or 'Snap objects to grid when the gridlines are not displayed'.

That should stop it from snapping Hope that helped.
 

https://forums.techguy.org/threads/placement-of-wordart-in-word-problem.846196/
Relevancy 41.28%

This may have been addressed before, but I wasn't quite sure how to search for it.
One of the things I loved about every version of Windows before 7 is that wherever you placed a window and however you sized it and however you presented the content (list, large/small icons, etc.) that window would ALWAYS open up at that screen location , with those very attributes. With 7, however, (I'm running Home premium) the windows always have to open up the same size, always cascaded, and no matter how I want the contents displayed it seems to randomly change. Is there any way at all to modify those behaviors to make it like before, or any 3rd party software that lets you do that? Thanks.
daddio307
 

A:Window placement and icon size

I think you can solve at least part of that problem by right click an empty spot on the Task Bar and remove the check mark that I assume is in front of 'Cascade windows.'
 

https://forums.techguy.org/threads/window-placement-and-icon-size.1118133/
Relevancy 41.28%

My problem is the footnotes on a page begin way too high, leaving lots of unwanted white space below them. I've already adjusted Page Layout bottom margins and footer buffer to 0.25" (a very minimal amount) since I have no footers anyway, just headers. I've also formatted the paragraphs of the footnote separator and the footnotes themselves to minimize paragraph spacing, turn off widow/orphan control, etc. Still can't push the footnotes down to use good page real estate. Any suggestions?
 

A:Wood 2007 footnote placement

Hi tryingmybest, welcome to TSG.

What happens if you change the footer margin to 0? If you have no footers, you don't have to give it any room.
 

https://forums.techguy.org/threads/wood-2007-footnote-placement.932518/
Relevancy 41.28%

I'm about to reinstall my windows and after that kind of reorganize everything So I have a SSD and a HDD Windows x will be on the SSD Which means there will also be 'Program Files' and 'Program Files x ' on there Now on the HDD only one partition there I will manually make two more folders 'Program Files' and 'Program Files x ' My question is do the 'Program Files' folders have to be in the root of the drive e x H Program Files Because if not I would like them to be in a 'Programs' folder 'Program the Files' of folder(s) Placement which will be in the root along with 'Media' 'Games' and 'Stuff' H Programs Program Files Actually this is how I have it now but I am wondering if it is ok or maybe not recommended What made me think of this is I have the Origin client Placement of the 'Program Files' folder(s) from EA and when I open it it automatically creates a folder in the root of the HDD called 'Program Files x ' There's an 'Origin' folder in it but its empty I deleted it to see if it would recreate itself and the next time I opened origin the 'Program Files x ' folder reappeared - even tried a few times to confirm So is Windows or any programs bothered by 'Program Files' not being in the root of a partition Can I easily stick it into another folder of course before installing any programs in it Thanks -User edit minutes no replies view What's wrong Editing to put on top of list

A:Placement of the 'Program Files' folder(s)

I found this page where some people moved Program Files. But it didn't look trivial:
Move Program Files

I'm wondering if perhaps you can install your programs to folders underneath program files then move that folder to another physical disk. Then make a hard link to it. That way Windows Registry settings all the rest should still point to the same place. In fact PC Magazine has a utility to do it. I think it costs $7 or $8. Also I've seen some people use other hard link utilities designed for moving games, for free. (In Linux when a partition started to fill up I just made a link to another and moved programs over. It worked quite easily there.)

If you try it I would make plenty of backup images to external drives so that you can get back to square one. But if it's a clean install you're starting with, that's the time to experiment. Also I'd look through Brink's Tutorials. Anything that refers to hard links or junction points.

http://www.sevenforums.com/general-discussion/316355-placement-program-files-folder-s.html
Relevancy 41.28%

My Windows 7 desktop has its icons arranged in two columns flush left. If I drag an icon away from that array, it snaps back. What can I do to allow icons to be moved away from the left margin?

A:Desktop icon placement in Windows 7

Right click on the desktop, select View and uncheck Auto arrange and Align to grid.

http://en.community.dell.com/support-forums/software-os/f/3524/t/19989943
Relevancy 41.28%

Tech Support Guy System Info Utility version OS Version Microsoft Windows Home Premium Service Pack bit Processor Intel R Core TM i - QM CPU GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card Intel Solved: placement Google toolbar R HD Graphics Family - Mb Hard Drives C Total - MB Free - MB D Total - Solved: Google toolbar placement MB Free - MB E Total - MB Free - MB Motherboard Hewlett-Packard Antivirus Norton Internet Security Updated and Enabled The google toolbar is way over to the right while on the same line Norton is way over to the left I have using the double arrow to expand the google toolbar but it doesn t respond I have also tried reinstalling the toolbar what I think would work is moving the toolbar on it s own separate line but I don t know how I want the toolbar icons to show so I don t alway have to use the drop Solved: Google toolbar placement down box to access things like my bookmarks can you help thanks nbsp

A:Solved: Google toolbar placement

Can you explain how you resolved this please, for the benefit of other users. Thanks
 

https://forums.techguy.org/threads/solved-google-toolbar-placement.1064478/
Relevancy 41.28%

When I open multiple explorer windows on my computer I get this:
I want it to look this this by default (I believe Linux calls it 'smart windows placement')
Any suggestions?

A:KDE-like smart window placement for Windows 7?

Have you looked at this site?
Projects/KDE on Windows/FAQ - KDE TechBase

Create a backup HDD image before attempting to install this.

http://www.sevenforums.com/general-discussion/299789-kde-like-smart-window-placement-windows-7-a.html
Relevancy 41.28%

Hi,

I was wondering if anyone knows a way to get icons to stay EXACTLY where you put them. I use the 'desktop' feature on the taskbar and have multiple rows of icons and i would like to be able to organise icons into the second etc row before having filled up the first row, or place them on the right hand side without having filled all the space in between. basically i want to plce an icon where i want it and have it stay right there not slide over.
thanks for any insight.

A:taskbar icon absolute placement

You could create QuickLaunch + display a number of those icons in your TaskBar, or you could use some 3rd party software such as
7 Taskbar Tweaker or Fences.

http://www.sevenforums.com/customization/177576-taskbar-icon-absolute-placement.html
Relevancy 41.28%

Hello so my friend gave another went after placement Solved: Something RAM wrong horribly person his MB RAM DDR which I believe is Hz or something of the sort The person s computer has in total memory slots being used with two MB RAM sticks and the other free So we took off the cover completely powered off the computer by unplugging and everything and inserted Solved: Something went horribly wrong after RAM placement the MB stick into the free slot Then we turned on the computer and we heard a few beeps at the beginning and just a black screen saying quot no signal quot We said ok no biggie that must mean that it s just incompatible So for a last try we tried putting the MB stick into the other free slot after that screen appeared but quite f ed up looking and some quick text appeared quot memory failure blablaa more text quot We turned off the computer took off the MB stick and powered the computer on again hoping that everything will work as normal since we took off the incompatible stick but it just kept on saying quot no signal quot on his monitor and there was some weird popping noise coming from his computer ever since We have no idea what just happened Solved: Something went horribly wrong after RAM placement and what to do If someone here knows what the problem is and how to solve it without buying anything new that would be great I don t feel like paying for that guy s repair The MB stick by the way had a sticker with something of the lines DDR and then MX amp r something like that So we thought the quot DDR quot and the quot quot on his current sticks meant they both match and should work nbsp

Relevancy 41.28%

Hi, I have several question about LCD monitor placement.
Is it harmful for the LCD to place it near electronic equipment such as cell phone, sub-woofer, fan?
Is LCD equipped with vibration protection from a continuously vibration environment? I mean, is it harmful for the LCD if we place it in a PC desk which get vibration from other electronic equipment, such as fan or sub-woofer maybe?

Thanks.
 

A:Solved: LCD Monitor Placement Guide

LCD's are not subject to problems from normal magnetic fields
like CRT's are.
CRT screens can get magnetized.
LCD's do not use electromagnetic deflection.
They turn on and off each subpixel instead.

Vibration can have an effect on any machinery over time,
but it shouldn't be anything serious from what you described.
Might want to tighten the cable connections every once
in a while.
 

https://forums.techguy.org/threads/solved-lcd-monitor-placement-guide.864162/
Relevancy 40.85%

I installed the latest IE 11 update and now, when I add a link to the Favorites Bar, it adds it at the end instead of the beginning. How can I fix this?

Thanks.

A:IE update changed placement of Favorites Bar links

Hi and Welcome to TSF!

That depends on which part of the favorites bar you think is the "end".

It will always put the link at the most far left position and its been doing that since IE 9 I believe.

http://www.techsupportforum.com/forums/f56/ie-update-changed-placement-of-favorites-bar-links-994274.html
Relevancy 40.85%

Hi first time member am thanking for help in advance My problem is twofold One something is placing random ads on various web pages I go to two when I do a google search and are given results result link I pick will redirect to another random search result If I close that random search result and click the initial google results ad Rediirection Google Random Virus, placement ie click a valid result then proper search page will open I hope that makes sense Also sometimes my keyboard will suddenly stop working ie punch a key computer freezes Am attaching DDS txt and attach txt ARK txt Thanks again DDS Ver - - - NTFSx Run by user at on Fri Internet Explorer BrowserJavaVersion Running Processes Pseudo HJT Report uStart Page hxxp www thestar Google Rediirection Virus, Random ad placement com theweather Canada Province Ontario amp City Google Rediirection Virus, Random ad placement Toronto uSearch Bar hxxp g msn ca SEENCA SAOS uInternet Settings ProxyServer mrtornt mlx marsulex com uInternet Settings ProxyOverride lt local gt BHO Adobe PDF Reader Link Helper e f-c d - d -b d- b d be b - c program files common files adobe acrobat activex AcroIEHelper dll BHO Java tm Plug-In SSV Helper dbc -a - b-bc - c c c a - c program files java jre bin jp ssv dll BHO JQSIEStartDetectorImpl Class e e f - ce- c -bc -eabfe f c - c program files java jre lib deploy jqs ie jqs plugin dll TB BDAD DAD-C - A -ADC - B B FF D - No File EB Media Band - a - b-a - c a a - SystemRoot system browseui dll uRun MsnMsgr quot c program files msn messenger MsnMsgr Exe quot background uRun Dilberttest web link quot c program files dilberttest screen saver FWLink exe quot uRun RegistryMechanic c program files registry mechanic RegMech exe H mRun Synchronization Manager mobsync exe logon mRun IgfxTray c winnt system igfxtray exe mRun HotKeysCmds c winnt system hkcmd exe mRun QuickTime Task quot c program files quicktime qttask exe quot -atboottime mRun Adobe Reader Speed Launcher quot c program files adobe reader reader Reader sl exe quot mRun SunJavaUpdateSched quot c program files java jre bin jusched exe quot dRunOnce SetupICWDesktop c program files internet explorer connection wizard icwconn exe desktop StartupFolder c docume alluse startm programs startup micros lnk - c program files microsoft office office OSA EXE StartupFolder c docume alluse startm programs startup nkbmon lnk - c program files nikon pictureproject NkbMonitor exe IE E amp xport to Microsoft Excel - c progra micros office EXCEL EXE IE c fe - f d- d -a b- aa c a - SystemRoot web related htm Trusted Zone adp ca DPF DirectAnimation Java Classes - file c winnt java classes dajava cab DPF Microsoft XML Parser for Java - file c winnt java classes xmldso cab DPF F F -B B - CF- - A EE - hxxp testcr bloodservices ca wficat cab DPF - - - - AA B - hxxp download microsoft com download e f e fcec b- c b- b -adab-ab c a f wvc dmo cab DPF BC -FBE - D - F- A C C - hxxps pay adp ca payatwork Common SpectrumRDC cab DPF ED - B- DA -BF -BE C EC - hxxp cdn scan onecare live com resource download scanner wlscbase cab DPF A - DD - CF-A - AA C D - hxxps pay adp ca payatwork Common iemenu cab DPF D -FF - BA- D D-AD E DDE - hxxps ar adp ca payatwork common arview cab DPF AD C - E- D -B E - F D - hxxp java sun com update jinstall- -windows-i cab DPF FFBE D- C C- - BD- DC B C - hxxp fpdownload macromedia com get flashplayer current ultrashim cab DPF A A - EAA- D -B F- C C C - hxxps pay adp ca payatwork Common Ssdw b cab DPF CAFEEFAC- - - -ABCDEFFEDCBA - hxxp java sun com update jinstall- -windows-i cab DPF CAFEEFAC-FFFF-FFFF-FFFF-ABCDEFFEDCBA - hxxp java sun com update jinstall- -windows-i cab DPF D CDB E-AE D- CF- B - - hxxp download macromedia com pub shockwave cabs flash swflash cab Handler cdo - CD A- B - D - DB- C FB D - c program files common files microsoft shared web folders PKMCDO DLL Handler intu-qt - BF D-BA - b- F F-AD D A F F - c program files quicktax ic pp dll Notify igfxcui - igfxsrvc dll FIREFOX FF - Profile... Read more

A:Google Rediirection Virus, Random ad placement

Hi

Please visit this webpage for download links, and instructions for running ComboFix tool:

http://www.bleepingcomputer.com/comb...o-use-combofix
Please continue as follows:
Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix, link
Remember to re-enable them afterwards.

Click Yes to allow ComboFix to continue scanning for malware.

When the tool is finished, it will produce a report for you.

Please include the following reports for further review, and so we may continue cleansing the system:

C:\ComboFix.txt
New dds log.

A word of warning: Neither I nor sUBs are responsible for any damage you may have caused your machine by running ComboFix. This tool is not a toy and not for everyday use.

http://www.techsupportforum.com/forums/f100/google-rediirection-virus-random-ad-placement-348395.html
Relevancy 40.85%

I have recently downloaded IE Whilst using the browser if i click on a link and it opens in a new window I occasionally placement warnings window Solved: mcafee about get a warning from mcafee regarding a registry change regarding the placement of the new window Heres the warning message McAfee has detected a potentially unauthorized change to your computer Details SystemGuard Name Internet Explorer URLs Change Registry Modified More Solved: mcafee warnings about window placement Info SystemGuard Description Monitors changes to your Internet Explorer preset URLs to prevent spyware or other potentially unwanted programs from changing your browser settings without your permission Process C Program Files Internet Explorer iexplore exe Process Name Internet Explorer Process Publisher Microsoft Corporation Affected Items HKEY USERS S- - - - - - - Software Microsoft Internet Explorer Main Window Placement If you did not expect this change McAfee recommends that you block it If you expected this change allow it Does anyone have the same problem and know how to stop it happeneing as its driving me mad nbsp

Relevancy 40.85%

My desktop icons don't stay where I put them, and the Quick Launch bar keeps getting turned off. I've been doing some 'spring cleaning' lately clearing out start-up programs, services, invalid links and registry entries and the like, and I also used some of the customisation options on the RegSeeker Tweaks panel (although I have tried changing all of these to see if they make any difference).

Does anyone know, i.e. where abouts in the registry icon placements are kept? Or how I can fix this?

Thanks, Jonaboff

A:Desktop icon placement & Task Bar Toolbars.

Howdy Jonaboff,

Have you made sure that your Icons are "auto align to grid?

Right click desktop/Arrange icons/ Make sure Align to grid is checked?

Also make sure you taskbar is not set to auto hide..

Also I know regseeker creates backups before cleaning. The only time I would suggest cleaning the registry is if after spyware cleaning etc. The registry should be kept alone other than that...read below about reg cleaners..

http://mywebpages.comcast.net/SupportCD/XPMyths.html

http://www.techsupportforum.com/forums/f10/desktop-icon-placement-and-task-bar-toolbars-152213.html
Relevancy 40.85%

First of allI am confused about toolbar verses taskbar which is which I was going through the tutorial that comes on the computer and was experimenting with moving the the darker blue bar at the bottom of the screen What I would like to accomplish if possible or advisable is to put the icons that are on the screen into that taskbar area and remove the icons from it that I don t use or even know what they are Some of them are duplicated on both screeen and bar area - Mozilla Firefox - Internet Explore - Ad-Aware SENear the start place I don t want need - Windows Media Player - Show Desktop - MSN - America Online Near the time About Placement Beginner Silly: Icon Question display I don t want need - AOL - QuickTime - Intel R Extreme GraphicsI also was trying to figure out how to get an icon for some of the Silly: Beginner Question About Icon Placement things I use from the start menu to be on that Silly: Beginner Question About Icon Placement bar NOW after reading so much I am confused if I should have all of this at all I don t really understand Silly: Beginner Question About Icon Placement the issues of programs on at the start up and slowing the computer down etc This all started as a fun thing like rearranging the furniture but now I am stumped as to how to do what I wanted how to undo what I ve done getting rid of the odd ones or if I should even have it at all Thanks for your time and patience I hope Jennifer

A:Silly: Beginner Question About Icon Placement

The computer you are using must be an old one though new to you--i.e. AOL8
If you will, install a program called Win Patrol (I think it is just right for you and it is free) you will be able to control your startup programs and several other things such as cookies. It also offers protection by blocking a lot of malware from getting on your computer. Allowing programs to startup when you turn on your computer that you are not using immediately is like running your windshield wipers on a sunny day. You should have no problem using this program, but if you need a little help, just ask.
If AOL is not your IP then uninstall it using the add/remove utility in your control panel. You didn't mention a firewall. I hope you have one installed.
I am sure I didn't answer all of your questions but lets take it slow and keep it simple.

http://www.bleepingcomputer.com/forums/t/53165/silly-beginner-question-about-icon-placement/
Relevancy 40.85%

Every time i update my nvidia gpu drivers the setup messes up my desktop icon positions and doesn't return them to their original positions after the installation. This has occurred every single time i've updated my gpu drivers from the beginning of time. Is there way to prevent this?

My desktop is usually full with clutter because i always put the files which i frequently use there.

Is there any stable program that can save the grid layout and formulate the positions automatically from memory or a file?

Nvidia geforce 9800 gtx+
1920x1080
32bit home premium

thanks

A:Nvidia messes up desktop icons placement

Yep it does that every time. Icon Restorer may work for you. Don't click that big green button, the download link is at the bottom of those pictures:

Backup & Restore Desktop Icons Position on Windows 7, Vista & XP

http://www.vistax64.com/graphic-cards/301520-nvidia-messes-up-desktop-icons-placement.html
Relevancy 40.85%

Hi all, I am new here so Hello and thank you for reading
I wanna get me a CM Storm Trooper case for part of a new project and I need to know the rear exhaust placement dimensions so I can prepare my desk area.
I have at the moment an Antec 300 and I drilled a 4" external filtered vent for the exhaust to draw cold air in from outside, The case at the mo is sat on a plinth on
the desktop and I have searched everywhere for a detailed plan of measurements for the Trooper but no avail.
I have attached a pic of the measurements I need if any Trooper users out there could verify please
Appreciate any help as I am eager to get this case ordered.
Thank you.
EDIT - I sorted it.
 

http://www.techspot.com/community/topics/cm-storm-trooper-exhaust-placement-measurement.199259/
Relevancy 40.85%

Hi eventually I will be converting over to IE this notebook is about years old and was my maiden voyage into XP and had I known at the time I would have started organizing my regular mail into folders however I did Folders And Placement Of Problem In Setup Ie6? Inbox not find out until recently that this could be done The long and the short of it is I started by creating new folders for my Inbox and then of course naming them and moving my personal emails into the respective folders I spent almost one day doing only part of this and then restarted the next day What happened and what I need to figure out how to fix is Problem In Setup And Placement Of Inbox Folders Ie6? that on the second day of doing this I discovered that my new folders for my Inbox were being placed underneath my Sent Items I have been told to try to drag and drop these but am not good at that and wondered how I get these into simply the Inbox named folders area that started out on the First day I commenced my organization of my mail It is a nuisance at the moment as to look for my entire Inbox personal folders I look at the beginning where I would like them all to be and then have to scroll down through Outbox and Sent and then there is another listing of my added personal Inbox folders I hope that someone can help Thankyou

http://www.bleepingcomputer.com/forums/t/101545/problem-in-setup-and-placement-of-inbox-folders-ie6/
Relevancy 40.85%

I'm trying to auto decimal 2 places in a single worksheet of a fairly large workbook. If I use the Excel Options menu, it becomes global to the entire workbook. Anybody got any ideas? I have Excel 2007 and have seen this done but am not sure what version they were using.