Windows Support Forum

Will My Home Network Work?

Q: Will My Home Network Work?

Hi there,

I am new to home networking.

I am trying to connect 2 of my apartment with network as well as all my rooms.

I wonder if my networking will work in this way? Please advise if I need to change any devices.

Relevancy 100%
Preferred Solution: Will My Home Network Work?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Will My Home Network Work?

Hmm that diagram is most interesting - - and imo hard to determine what's what.

Try something like:

Code:

isp==modem/router --- wired --- ?
|
+ - - - wifi - - ?

http://www.techspot.com/community/topics/will-my-home-network-work.194191/
Relevancy 17.63%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
 

http://www.techspot.com/community/topics/problems-with-wireless-network-adapter.188964/
Relevancy 19.35%

Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened I finish tower Power will not work button My the pc and My tower Power button will not work when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F PANEL cords u know the pwr switch and all that jazz turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading P S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds nbsp

A:My tower Power button will not work

You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
 

http://www.techspot.com/community/topics/my-tower-power-button-will-not-work.203422/
Relevancy 19.35%

I recently bought a Windows DVD to put it on the new PC I'm building for my mom. That PC has troubles with the DVD drive itself (stupid motherboard doesn't have IDE..), so I figured I'd set up a bootable USB to install Windows before the adapter arrives. Problem is, the installation DVD isn't playing on my drive (I tried another DVD with a movie on it before, so I don't think its my drive). I brought it to a PC shop and for them it worked fine, even though its quite scratched on the back (I guess the person selling those DVDs doesn't know how to ship them properly) I didn't wanna pay 20 bucks for them copying the DVD, even though I'll probably end up having to do that.

Any ideas what the problem is, or what I can do? I'm not sure if the DVD will work in my moms drive either..
 

http://www.techspot.com/community/topics/dvd-works-with-other-drives-but-not-mine-while-other-dvds-work.216661/
Relevancy 18.92%

I have an Aspire one NAV50 with Windows 7 starter.

One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.

I've tried the ff on my laptop:

restart
update
scan the laptop with MalwareBytes
Fn+f2
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
 

A:Laptop would work on ethernet cable not on Wireless Connections

I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
 

http://www.techspot.com/community/topics/laptop-would-work-on-ethernet-cable-not-on-wireless-connections.201158/
Relevancy 19.35%

hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My internet will only work through ethernet cable not wireless

There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.

Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.

Did you install anything on your PC before this happened? Did Windows install any updates?

Try disabling your AntiVirus. That may be the issue. I doubt it though.

Tell me if any of these solutions help.
 

http://www.techspot.com/community/topics/my-internet-will-only-work-through-ethernet-cable-not-wireless.197067/
Relevancy 18.92%

Hey guys,

I have a Sony Vaio VPCEH15EN laptop & the OS is Windows 7 home basic. I have a wifi router which is of TPLINK.

The wifi won't connect to my laptop but it works fine on my mobile..it would only start working when I use the ethernet cable. I never had this problem before. I have tried everything ..I also tried the winsockfix.bat but all my efforts have gone in vain..I just don't know if the wifi router is faulty or the modem of my ISP...Please help me solve this problem.

Best Regards,
Om
 

A:Wifi on my laptop won't work but works when I use the ethernet cable

I have solved the problem by myself. To do this, first you have to disconnect your Ethernet cable from your laptop and follow the steps: Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the Wi-Fi networks. Click on the available network and select connect. After a while, you will be asked to give a password for your Wi-Fi connection. Type the password and click on connect button. And now will be connected to your Wi-Fi network via wireless.

May be it will help you.
Regards
MD. MAHMUDUL HASAN
 

http://www.techspot.com/community/topics/wifi-on-my-laptop-wont-work-but-works-when-i-use-the-ethernet-cable.200754/
Relevancy 18.92%

Hi! I don't know much about this place but there's a problem with my laptop and I don't know how to solve it. My laptop won't connect to the wifi anymore but it works perfectly fine with the ethernet cable. I appreciate it very much if you tech geniuses could help me out. THANK YOU!
 

A:My WiFi on my laptop won't work but works with Ethernet cable

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-on-my-laptop-wont-work-but-works-with-ethernet-cable.206652/
Relevancy 18.49%

Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

http://www.techspot.com/community/topics/internet-only-working-when-connected-using-ethernet-cable-wifi-doesnt-work.197081/
Relevancy 18.06%

First of all, sorry for my bad english.
My pc was working perfectly for about a year now, but these days it started having problems.
In the past few weeks it started disconnecting from the internet with the message: you don't have a valid
ip configuration. (It was working on the other pc connected to the router with lan, and on the notebook connected through wifi)
A reboot of the pc/router did always solve my problem in these situations.
Yesterday, my internet connection started connecting/reconnecting, and I couldn't solve it in any way, not with
a restart, and not with that network repair tool (idk it's name, I have hungarian windows). When it stayed connected for more then 2 seconds I was even able to load google, youtube, other sites,
I tried some solutions, like disabling the energy saver settings, setting it to 10mb half duplex, etc, but nothing worked, my
internet kept connecting/reconnecting.
Today I started my pc and it works perfectly.. Any ideas on how to solve it? I have the newest lan driver.

My mobo is Asrock 960gm-vgs3 fx.
 

A:Network keeps reconnecting

It appears that you manually configured the IP for at least one system.
DON'T do that - - make sure all systems use DHCP
 

http://www.techspot.com/community/topics/network-keeps-reconnecting.216254/
Relevancy 19.78%

Hey guys... I just got a new EVGA GTX650 ti boost superclocked. I just put it in and I was not getting any signal to my monitor. I tried VGA, HDMI and DVI. Nothing worked and when I took it out to try booting with my integrated graphics, I didn't get any signal to my monitor. All of my connections and wires are connected properly, my power supply is the right voltage and has enough power to support my graphics card. My hard drives are spinning but I cant access my BIOS. I have tried everything that is common. I know my graphics card is not defective and im thinking that it might be my motherboard. Any suggestions?
 

A:My integrated graphics won't work

You were using integrated graphics before the discrete card? It's strange that your onboard isn't working if it was before hand. Usually it's just a overlooked cable or something plugged in the wrong place. Did you make any changes to BIOS? Some boards require you to change the primary display adapter to PCIE or onboard. Maybe a BIOS reset will help the situation. I doubt there is any issues with the MOBO itself. I suggest stripping the build down to nothing but the bear essential components for operation. This way you can isolate the issue a lot easier.
 

http://www.techspot.com/community/topics/my-integrated-graphics-wont-work.194322/
Relevancy 19.78%

I am considering purchasing a MSI ATX DDR3 2133 Motherboard 970 for my new computer build, and heard from somewhere that it is not compatable with windows 7? Is this true?
 

A:Will my mobo work?

Where did you hear that? It will run Windows 7 just fine.
 

http://www.techspot.com/community/topics/will-my-mobo-work.214529/
Relevancy 17.2%

Resolved DNS on other on one problem working laptop, DNS network computers problem on one laptop other computers on network working I returned home for the holidays with my laptop running Windows Enterprise -bit When I connect to the wireless network my laptop reports that it is connected with internet access but there is no browsing capability at all P P works Steam works but Chrome Firefox Steam browser give me DNS problem on one laptop, other computers on network working the quot This webpage is not available quot page telling me that the DNS lookup failed All the other computers at home are working happily My settings were to obtain an IP address and DNS server address automatically nslookup said DNS request timed out It didn t work with the wireless or the wired internet with an ethernet cable I set up another network by using my iPhone as a hotspot to make sure it wasn t an issue with all connections and my computer could browse just fine using the iPhone hotspot But it didn t work with my home connection The first thing I tried was to use openDNS s DNS addresses and with my home connection It still failed and nslookup gave the same quot DNS request timed out quot I reset the modem router it s combined unfortunately to factory settings and tried directly connecting with an ethernet cable again It worked for half a second and I opened webpages before it stopped and gave the DNS errors again I tried the wireless internet and it still didn t work I can connect to the modem router I made a guest network just to try it and I got DNS errors again When I reconnected to my primary network it worked for half a second again then stopped My next attempt to fix it was going to the cmd prompt and typing ipconfig release then ipconfig renew I restarted my computer and tried again but I still received the same errors with P P working like before I turned off my firewall and tried but it still didn t work Then I tried ipconfig registerdns restarted my computer and tried again Still didn t work At this point IPv has been disabled but it s still not working I restarted the modem router multiple times but it does nothing to alleviate the problem I have Microsoft Security Essentials did a scan nothing detected Also tried System Restore to two days ago got an error about how it failed Summary Using openDNS address Turned off IPv ipconfig release ipconfig renew ipconfig registerdns no virus trojan system restore failed None of the above worked Other computers at home using the ISP s provided DNS server work My computer works with other connections but not my home network Is there anything else I can try Thanks in advance nbsp

A:DNS problem on one laptop, other computers on network working

Fe3C said:





Summary:
Using openDNS address.
Turned off IPv6
ipconfig /release
ipconfig /renew
ipconfig /registerdns
no virus/trojan
system restore failed

None of the above worked.
Other computers at home using the ISP's provided DNS server work[1].
My computer works with other connections, but not my home network.Click to expand...

Good work. The router is fine[1] so don't fuss with it anymore.

Look for an updated driver for your WiFi adaptor.

On any working system run IPCONFIG /ALL and compare it to the results on the failing system. Look for missing Gateway address or IP address like 169.x.y.z

Some concern re failing system restore, but that's not a networking problem per se.

Work on a wired network first and then move to wifi.
Empty all manual settings on the LAN Connection (get properties, scroll to tcp/ip, click property button - - check ALL tabs; delete everything.

You should be able to PING 8.8.8.8 and then PING google-public-dns-a.google.com.
This shows the LAN adaptor has connectivity and DNS resolution.

Now do the very same sequence with your WiFi connection.
Disconnection from the router and then reconnect.
Inspect IPCONFIG /ALL again to look for valid IP addr, gateway addr and valid DNS settings. (not the OpenDNS you had before).

ping 8.8.8.8 ; if this doesn't work, then the WiFi settings are invalid even before DNS is an issue.
 

http://www.techspot.com/community/topics/dns-problem-on-one-laptop-other-computers-on-network-working.174565/
Relevancy 38.27%

Hey guys,

I had a quick question about a network at home.

My house is 15m tall and 9m wide, I want to network 3 computers (mine, wife, son).

Should I wire the house with Ethernet cat 5e cable and put a 100 base T switch?
Or
Just put a Wi-Fi access point and Wi Fi cards for the 3 computers.

I prefer wireless, but I?ve heard Ethernet would have slightly faster speeds due to less aerial interference.

Suggestions? Solutions? Thank you!
 

A:A network for home? Which one?

First of all... don't put a 100 base T switch anywhere but the backup bin. If you're going to bother wiring anything put in GbE as it's inexpensive now. Also, if you're going to bother with any wiring then I'd put in the best/fastest type I could find to future proof it as much as possible. Fishing cable isn't something you want to repeat in a couple of years.

To more directly answer your question, Wi-Fi will probably be fine for you depending on the distance from your WAP (wireless access point) and what your walls are made of. You'll also need to keep in mind any other Wi-Fi interference so the distance to your neighbors can have an affect. All that being said any modern WAP will be faster than a 100 base T switch under normal conditions when it comes to throughput (how much data you can move) - but worse when it comes to latency (how long a specific bit of data takes to get from one point to another). If you're playing games you'll want low latency. If you're just streaming content or moving files around then you just want throughput.
 

http://www.techspot.com/community/topics/a-network-for-home-which-one.213242/
Relevancy 17.63%

Ok so I do not know if this is the right forum or site to ask this question to be honest It applies to Linux though more applies to a networking issue So here is the problem I currently live in an apartment that has its own network that is given to them by their ISP So my router is getting its ip address from their DHCP server router and then I give out my own problem Apartment Network IP address via my own router So Im trying to be able to SSH into my machine or even just to remote desktop onto my Windows side I have my router set up accordingly and I can ssh into my machine when I am on their own network not my own but when I am away I cannot because Apartment Network problem my routers IP address is unique in the apartment complexes network Does anyone know a solution to this I was thinking a VPN into their network Apartment Network problem and then SSH into my own afterwords Problem is I m really not sure if this is a solution and if so How do I do it Thank you for your time I hope someone has a solution to my problem nbsp

A:Apartment Network problem

This is a STATIC route or PORT FORWARD problem and without the consent the apartment owner, neither are possible.

Your data flow is

Code:
ISP == Apt.router---Your.router---your.pc
Assume the Apt.router is at address 192.168.1.1
If yours is anything else, then your lan is isolated from the apt and you have great security.
* to get Public access (eg from work) to your pc, you need to
cross the Apt.router nat, get to your.router and port forward to your pc - - complicated.​If your.router is on the Apt.lan (meaning you disable DHCP in your router)
you are exposed to all the other apartments,
and still need port forward to your PC, and that requires a FIXED address assignment in the apt.router.​
IMO, the conclusion is this is non-trivial, has dependencies on the good will of the apt owner/tech support guy and requires extra diligence on your systems for security & privacy.
This would need (imo) to be more than just 'I want to play games on the Internet'
 

http://www.techspot.com/community/topics/apartment-network-problem.213209/
Relevancy 19.35%

As I don't go menu and Monitor's won't buttons the work away am writing this I have this blue square on the screen with all the settings for this monitor Whichever button I press on the monitor the menu won t go away Not even the power button works so that means I can Monitor's menu won't go away and the buttons don't work t disable Monitor's menu won't go away and the buttons don't work the monitor Unplugging and plugging it back in doesn t work as soon as the picture appears the menu appears Monitor's menu won't go away and the buttons don't work as well Let me give you a bit of a history as it might help determine the cause About a month ago my old monitor monitor started behaving weird It started turning itself off every now and again Sometimes few times a minute Every time it turns off it turns back on with the splash screen saying quot BENQ quot and everything I had no idea why it does that I tried pressing the buttons on it to go into the menu but every button seemed to shut it off and every button seemed to turn it on So I gave it to a family friend to try and fix it He said that the quot control board quot started dying and that he doesn t have a spare one or something like that He then gave me a spare monitor of his monitor until I can buy a new one or fix monitor So I took monitor from him and sent monitor to the shop so they can try and fix it About a week passes and the shop calls and says that they fixed monitor I go and pick it up and when I came home I unplug monitor and plug in monitor monitor was working perfectly then Monitor worked for about minutes and started shutting down again And when I tried using the buttons they wouldn t work again Same thing as last time So I return it to the shop and tell them that it doesn t work That was about a week and a half ago They still didn t fix it The problem is now the monitor also started having problems It doesn t turn off yet but the menu buttons don t work Power button doesn t work Nothing And on top of that the menu won t disappear from the screen As I am typing this there s a menu on top of everything Every now and again the menu will switch to a different option like quot brightness quot quot auto adjustment quot and such like the buttons are being pressed Now I am wondering could it be that my PC is quot breaking quot these monitors Is there a way for a PC to physically damage a monitor What should I do in that case Also I should say that ever since monitor died and after I installed monitor my PC has been getting blue screens of death It hasn t happened once in years since I got this PC and it started after I got monitor I don t know if that s something that s important but there it is If you need more info please let me know I am trying to figure out what is happening and every bit of help is appreciated Thank you nbsp

A:Monitor's menu won't go away and the buttons don't work

No one has any relevant information?
 

http://www.techspot.com/community/topics/monitors-menu-wont-go-away-and-the-buttons-dont-work.212651/
Relevancy 17.63%

So I'm in the market for a new wireless card for my desktop. The last one I bought was a piece of crap from the start. You don't generally see network card reviews. Was wondering what some good quality options would be.
 

A:Network card recommendations?

The best option would probably be a dual-band one that has 802.11ac support; if you've got an AP that supports the standard, it'd be worthwhile investing in that kind of card. They can be kinda expensive though (usually around $100 from what I've seen).
 

http://www.techspot.com/community/topics/network-card-recommendations.208722/
Relevancy 15.05%

I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?
 

A:"Network cable is unplugged" but its really not..

sadgyrl514 said:





I have a desktop computer that is running on Windows Xp, up until this morning, everything was fine, I could connect to the internet with no problem.

I turned on my computer, and it is telling me that the network cable is unplugged, as well as my network is not showing when i go to "my network connections"

But yet.....

I AM connected to my router, and there is no problem with the cord (I tried it on different computers as well as my Xbox 360 on the same port....so I know its not the router)....when I go into device manager, everything seems to be working correctly, and my network adapter and ethernet card both are marked as working properly.

Any ideas how I can fix this issue ?Click to expand...

Try rebooting,
 

http://www.techspot.com/community/topics/network-cable-is-unplugged-but-its-really-not.166539/
Relevancy 37.84%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 18.92%

Neither my keyboard or mouse are working on any of the 7 USB ports on my computer. My mouse was initially working, but I read somewhere if you delete the keyboard drivers you can reinstall them and it will work again. BUT when I was doing that I stupidly uninstalled my mouse driver so now NOTHING works. I can't try if it works in safe mode because my keyboard doesn't respond when I hit f12 during boot up.

When I plug in the mouse or keyboard, I get a window that pops up asking if I want to install the hardware, but it's impossible for me to do anything because my mouse and keyboard don't work! If anyone has any ideas I would greatly appreciate the help. Thanks!
 

A:My Dell Demension e510's (Window's XP) keyboard and mouse don't work

First I would try to find a different working keyboard because you should at less be able to boot into safe mode because the drivers don't even load until windows start loading.
 

http://www.techspot.com/community/topics/my-dell-demension-e510s-windows-xp-keyboard-and-mouse-dont-work.211116/
Relevancy 17.63%

Recently my Gbps has taken a serious nosedive I was around Gbps then it dropped dl Adapter 0.84Gbps Network The other computers on the network are getting Network Adapter 0.84Gbps dl great speeds it s just my computer My computer is running fine It s just the connection speeds This isn t just happening on WI-fi it s also happening when I plug in the Ethernet cord My network adapters are Broadcom n Network Adapter Microsoft Kernel Debug Network Adapter Qualcomm Atheros AR PC-E Gigabit Ethernet Controller NDIS They are all up to date And I use Avast internet security Also I ve cleaned the cache in both firefox and chrome browsers I ve also removed all but add block add-ons I m using AARIS modum router through time warner cable And again the Network Adapter 0.84Gbps dl other computers are getting great speeds always up of Gbps I even checked my Mom brand new computer which is getting upwards of Gbps I ve called TWC they sent someone the wires were a bit loose and it fixed everyone s laptop but mine Please help I m clueless here Here is the Broadcom n Network Adapter settings - auto mhz - Disabled n Preamble - Auto Antenna Diversity - Auto AP Compatibility Mode - Higher performance Bandwidth capability - b g MHz Bluetooth Collaboration - Auto BSS PLCP Header - Auto Short Long BT-AMP - Enabled Disable Uon Wired Connect - Disabled Fragmentation Threshold - IBSS g tm Protection Mode - Auto IBSS Mode - b Only Locally Administered MAC Adress - not present Minimum Power Consumption - Enabled Mixed Cell Support - Disabled Power Output - Priority amp VLAN - Prioroity amp Vlan Disabled Rate - Best Rate Roam Tendency - Auto Roaming Decision - Auto RTS Threshold - Shorti GI - Auto WMM - Enabled WZC IBSS Chaneel Number - MHz XPress TM Technology - Disabled nbsp

A:Network Adapter 0.84Gbps dl

Also I recently installed windows 8. I've tried all sorts of things to get it to work. Still no luck.
 

http://www.techspot.com/community/topics/network-adapter-0-84gbps-dl.210602/
Relevancy 15.05%

I have an installation folder on my main machine(Windows 7) with all my software. I have repeatedly run into issues connecting odd devices to my shared folder. This time I have installed Windows 10 Technical Preview (on a different machine) and don't understand why it tells me I can't access my own machine. After all these years, you would think user friendly would be a reality. It seems to be a coin toss as to which machines will connect. I hate never knowing I can access my own machine without issue. Here I am trying to install applications but yet I can't get to my storage location.

What is the secret to sharing your machine, so that anyone on the same network can access shared folders?

Edit: I always turn on "Network Discovery" and "File and Print Sharing".
 

A:Network connection issues (year after year)

I'm more brutal via the firewall:

set trust localhost and your lan ip's, eg 192.168.0.1/24

then add two rules for only the PRIVATE PROFILE

inbound allow tcp/udp from 192.168.0.1/24 to any for ports 137-139,445
outbound allow tcp/udp from any to 192.168.0.1/24 for ports 137-139,445
I use a much more complicate scheme in reality to enforce known vs unknown devices and to segregate WiFI from wired access, but that's just me.

In services, ensure these are running

Bonjour Service ( mDNSResponder)
fdPHost
Network Connections
Network List Service
Network Location Awareness

 

http://www.techspot.com/community/topics/network-connection-issues-year-after-year.208880/
Relevancy 18.49%

My PC with windows 7 is the only computer with issues in the house. Ethernet works perfectly but wifi doesn't even when I don't have the ethernet hooked up. The wifi says it is connected but browsers, steam, and Itunes don't work. I have Bitdefender A/V and already tried uninstalling it, no change. I also uninstalled steam and Itunes with still no change. I even uninstalled and reinstalled the drivers for the wireless adapter. I tried looking and I don't recall downloading or installing anything around the time the problem started. Before I try replacing the adapter itself, I was hoping for help here since I saw a very similar problem in another thread.
 

A:Internet connects but doesnt work on wifi, ethernet works fine

Bump
If there is any more info I can give to help you help me, please let me know.
 

http://www.techspot.com/community/topics/internet-connects-but-doesnt-work-on-wifi-ethernet-works-fine.199827/
Relevancy 18.92%

Hey!
I have an Acer that spontaneously decided I no longer needed to play games. Everything else works perfectly fine. It's been doing this for the past few weeks and I've done all that I can. I'm no tech wizard by any means and I need some help. Pretty much it'll open to the load screen for a few moments then disappear back to my home screen. Any ideas on what it could be and what I can do?

These are the specs:
Acer Aspire V5 Touch with Windows 8.1
Aspire V5-V561PG-9683
Model number: Z5WV2

If you need more info let me know, I still have everything for it.
 

A:Acer Aspire issues; Games no longer work

If you are talking about the games that are loaded by a app. You will need to uninstall the app. Then reinstall the app. I have no ideal why this happens . But I have seen it more then once.
 

http://www.techspot.com/community/topics/acer-aspire-issues-games-no-longer-work.208471/
Relevancy 19.35%

Can I run 1600mhz ram on a mb which is supported 1333mhz (my config MSI-760gm P21-FX 1gb asus amd radeon 5450 gfx card And 4gb rm of 600mhz.
 

A:Can 1600mhz ddr3 ram will work on mb which is supported at 1333mhz?

1600 MHz RAM should down-clock to 1333MHz just fine, but I will not make guaranties. It usually works perfect, but there is always the possibility of incompatibilities.

The GPU memory and frequency is independent and irrelevant for this topic.
 

http://www.techspot.com/community/topics/can-1600mhz-ddr3-ram-will-work-on-mb-which-is-supported-at-1333mhz.207921/
Relevancy 19.35%

I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.

Any suggestions?
 

http://www.techspot.com/community/topics/i-hear-windows-startup-but-after-that-nothing-headphones-work-though.207890/
Relevancy 19.78%

Hi,

I installed win 7 x86 on a sony vaio vpceb36fg. Everything seems OK but the Fn keys. The combination of Fn+related keys work only for sound volume and screen lock button and not for others!

How to get all Fn keys worked please?
Is it needed to install any tool/utility?
 

A:Fn keys don't work

Your laptop came with Windows 7 Home Premium 64 bit so I'm curious as to why you decided to install a 32 bit version.

Laptops, particularly Vaios, have specific functions assigned to keys. On yours you were previously able to surf the web and play DVDs without booting up into Windows. To regain all that you've lost will take quite a bit of work. The utilities you need will be on a Sony support site. However, sometimes things have to be installed in a particular order before they work. It took me a long time Googling, downloading utilities and experimenting to get everything working when I reinstalled the OS on my Vaio.
 

http://www.techspot.com/community/topics/fn-keys-dont-work.207842/
Relevancy 19.78%

Before I say anything else, I am very new to building a computer. Ive never built one in my life. I am curious if the setup I have to far will work! I am trying to look for pretty cheap but good options for parts. So far I have a case, processor, and GPU in mind. I need ideas for the motherboard especially. I dont know how to tell if everything would work correctly, so if something would be incompatible, could you tell me?

So far I have

GPU: Nvidia GTX 760
CPU: Intel Core i7-3770k
Case: NZXT Phantom 240 Mid Tower
Ram:
Motherboard:
Hard-Drive: Seagate Barracuda 2TB HDD
Power Supply:
DVD Drive:
Operating System: Windows 7 64 Bit
Monitor:

Would there be anything else I need? Also what is thermal compound and Heatsink? Are these required for my setup? Please tell me if there is anything wrong with this so far and what items I should use for the unfilled spaces! Thank you all so much!
 

http://www.techspot.com/community/topics/will-this-setup-work.207722/
Relevancy 17.63%

So this thread is probably going to have a lot of information on it Timeouts Other Network Issues & but please don Timeouts & Other Network Issues t be discouraged I really really need help with some issues I ve been having and if someone could solve this for me that would be amazing So I ve been experiencing timeouts It seems I get timeouts whenever using Timeouts & Other Network Issues some sort of wired connection If I used an ethernet cable connected to my router I would get timeouts in several applications such as Minecraft and Teamspeak If I used Wireless I was fine So after lots of troubleshooting I couldn t find a fix so I ve been using Wireless ever since Lately however my wireless has been unusually slow not for everyone in the house just for me So what I did to solve the issue is I setup a D-Link DIR in my room to act as a Wireless Access Point I now get slightly faster speeds and bar connection rather than the bars I was getting previously Now I thought I wouldn t get these stupid timeout errors when connecting to this Wireless Timeouts & Other Network Issues Access Point turns out I still do On Teamspeak for example I will be talking to people and everything will be completely normal I won t lag or anything and then BOOM I get disconnected As I said no lag no warning I just get disconnected It s almost as though my router is randomly cutting me off So what I thought I d do was replace my primary router BoB Lite with the D-Link DIR and then use Wired connection because I assumed that the BoB Lite was causing the timeout issues Now I can t even connect to anything wired I must have changed a setting when troubleshooting or something But now I can t source internet from my laptop ICS and I can t connect to my original or new router wired The only way I can currently get internet is by using the DIR in my room but I still get timeouts when using applications such as Minecraft and Teamspeak So yeah multiple issues Firstly if I could just solve the timeouts then that would solve everything I could continue connecting to the modem in my room and everything would be fine OR is there a way I could someone reset all my network settings that I may have messed up when troubleshooting As I can no longer connect to any modem with a wired connection not even the DIR which could have solved the problem If anyone could help me out that would be GREATLY appreciated This is a really annoying issue and I ve tried to troubleshoot it myself for ages now but with no luck IF anything in this thread doesn t make sense to you please tell me and I ll gladly explain myself Additional Summarised Information My primary router is a BoB Lite my ISP is iiNet The modem in my room is a D-Link DIR I m using a NetComm N USB Adapter to connect to Wi-Fi I m using Windows Ultimate -bit Thanks very much Innug nbsp

A:Timeouts & Other Network Issues

Get a command prompt
enter PING 8.8.8.8

does that timeout or return timing values?
 

http://www.techspot.com/community/topics/timeouts-other-network-issues.207544/
Relevancy 19.78%

I have a toshiba laptop right at a year of having it, it will not allow me to get internet connection even though it shows its getting wifi or set up through the router.. Is this a virus or other issue
 

A:Toshiba Internet won't work

Moving this topic to appropriate forum.
 

http://www.techspot.com/community/topics/toshiba-internet-wont-work.207422/
Relevancy 19.35%

Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.

I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.

I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.

Does anyone knows how I get back my wireless connection? Pleasee
 

A:WiFi doesn't work only with cable ethernet

Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
 

http://www.techspot.com/community/topics/wifi-doesnt-work-only-with-cable-ethernet.207136/
Relevancy 19.35%

Hi all I have to the WLAN work as rather Router on from a WiFi LAN a a typical situation in my Internet and LAN setup My ISP provides me with a direct LAN cable that I need to connect either into my PC or into the WiFi Router WLAN port I also have a LAN that I need to connect to so I have installed a separate LAN card for the internal LAN purposes My two setups are below with their issues I hope someone can suggest a middle grounds to have a LAN and a WiFi too Scenario The ISP cable goes into the WLAN port of the Router Cables from the router goes into my PC network card and to other PCs for LAN purposes The PC cards are all configured to automatic IP LAN Internet WiFi is now available This works fine for a few days and then the internet stops working because there is a conflict of IP The ISP expects IPs like xxx and the one on the LAN Router for my PC is Scenario Router to work as a WiFi on the LAN rather from a WLAN The ISP cable goes into network card internet sharing is enabled Router to work as a WiFi on the LAN rather from a WLAN and automatic IP with the ISP s expected IP xxx Another cable goes from my PC s network card fixed IP into the regular LAN port of the same Router Without any issues over the months the Internet works the LAN works other PCs have fixed IPs too etc but no Wifi Can I have best of both the worlds in such a situation I can t install a rd network card for sure as the slot on the mother board is limited Please advise Thanks in advance Bhavbhuti nbsp

A:Router to work as a WiFi on the LAN rather from a WLAN

Code:

Scenario-1
isp==>(wan)router-->PC card-1, et al (conflict 123.237,234.xxx v 192.168.1.100)

Scenario-2
ISP===->pc card-1
pc card-2==>router
scenario-1 is a configuration or firmware condition
scenario-2 is a real security issue and the primary PC is basically acting as a DMZ server and is at risk.
Here's my setup:
Code:

isp==(wan)router-1--- PCs in the same room
|
+---(lan)router-2(with wifi) - - - wifi connections in the den

configuration to make this work with full file/print sharing:
router-2:

disable DHCP in this router
setup all WiFi settings here
notice: router-2 wan slot is left empty to make this work
Router-1:

set LAN address of router one as you please (eg: 192.168.1.1 )

set an address reservation for router-2's MAC -> a fixed, constant IP address on that same subnet (eg 192.168.1.254)
set the DHCP range small (eg 2-32)
router-1 will control all auto-ip assignments for both routers.

Personally, I add another tweak;

reserve ip addresses for all of my devices into the low-end of the dhcp range (say 2-10) and
let 'guests' take addresses above 10
This gives the opportunity to allow file/print sharing to known systems (2-10) and disallow for the guests.

Setup totally within the routers allow my laptop to travel and not be effected by these choices.
 

http://www.techspot.com/community/topics/router-to-work-as-a-wifi-on-the-lan-rather-from-a-wlan.207258/
Relevancy 17.63%

I was watching a tv show on nbc on my dell inspirion when I lost Wi-Fi. I checked and I had no signal and it wasn't even showing any available networks. I called dell and they ran me through a diagnostics. But once they saw my McAfee was expired and I wasn't paying extra for tech support they wouldn't help. Now it's not even showing Wi-Fi in my network connections just Ethernet. Please help
 

A:No Wi-Fi listed in network settings

IMO, McAffee isn't worth $$; ditch it and get WiFi running again.

THEN, choose { Avast or AVG } as your A/V product, DL & install.
 

http://www.techspot.com/community/topics/no-wi-fi-listed-in-network-settings.206899/
Relevancy 19.35%

Well I am accessing my remote router via and it works access work via phone, Remote PC doesnt via ok when I am using my Phone s Remote access ok via phone, doesnt work via PC browser chrome or IE on Samsung however when I am at computer at work I cant access my router I ran Tracert and I am getting up to hoops and th says quot Request timed out quot lt ms lt ms ms lt ms lt ms lt ms lt ms lt ms lt ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms Remote access ok via phone, doesnt work via PC ms ms ms border ge - unitedair- chg pnap net ms ms ms core te - -bbnet chg pnap net ms ms ms ae - chi ip gtt net ms ms ms xe- - - chi ip gtt net ms ms ms c-eth- - - -pe ecermak il ibone comcast ms ms ms he- - - - -cr ecermak il ibone comcast ms ms ms ms ms ms te- - - - -sur mortongrove il chicago com net ms ms ms te- - -cdn mortongrove il chicago comcas t Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Trace complete Anyone would know why it works on the phone and doesnt really go through all the way to the end nbsp

A:Remote access ok via phone, doesnt work via PC

Ok I have to ask first when you are using your phone is it always using mobile data or do you connect it at work via wifi? When reason that makes sense to me is at your work they maybe blocking the remote port. I guess it all depends on what you are using also. If you are just using standard RDP then they might be blocking port 3389. If you could give further information on how you are connecting remotely whether using software such as teamviewer or just standard RDP. Also how do you have your router configured. I can better understand witht is information thanks....
 

http://www.techspot.com/community/topics/remote-access-ok-via-phone-doesnt-work-via-pc.206550/
Relevancy 18.06%

Hi Guys,
Recently my laptop keeps disconnecting from the wi-fi and I get an error saying unidentified network, I try to troubleshoot, it tries to reset the wireless network adapter and then the computer freezes. After I reset the laptop the problem can happen again within a couple of minutes. The driver software is fully up to date and I have no idea what else I can do. It is an Acer Aspire 5750G running Windows 7. Please help it's making my laptop almost completely unusable
 

A:Unidentified Network

Have you tried a wired connection does that work any better?
 

http://www.techspot.com/community/topics/unidentified-network.206848/
Relevancy 16.77%

I bought a ADSL Modem D-Link 2730U

We are connecting to the Modem via Laptop, PC, Phone,... at the same time.

I want to know how can I monitor network(Receive/Send) for each user who connected to the Modem.

Can I do such thing?
 

http://www.techspot.com/community/topics/monitoring-network-for-each-user-connected-to-adsl-router-modem.206910/
Relevancy 17.63%

My wireless is not working on my computer, just a couple months ago I reset my computer using the ISO file, now my computer will only connect to the Ethernet cable. The wireless switch is on. I see a button near the VAIO button that shows a computer with signals coming off of it, I've tried pressing it but it doesn't do anything. Computer specs: VAIO Song Laptop with 6 GB Ram and 1 TB HDD.
 

A:Wireless network not working

Sounds like when you reset your computer the proper wireless drivers were not re-installed. I would start looking for a solution for this. What Operating System does it have (Windows 7 / Windows 8.1/ etc.)? Have you tried to remove the Wireless drivers and re-install those? How about downloading and installing updated drivers from the VAIO website?
 

http://www.techspot.com/community/topics/wireless-network-not-working.206511/
Relevancy 17.63%

Hi. This is my first post on this forum.

I would like to ask some help regarding a problem with my internet connection. Connecting our separate PC and my Laptop to my LAN works perfectly fine but when I use our wireless network to connect my laptop and phone, that's when the problem occurs. I tried rebooting the router (unplugging the power switch, cables and such). And I also tried rebooting my phone and laptop but nothing works. I also tried looking at the router settings and tried changing the security settings to none to see if I can connect but still cant.
I just don't know what the problem is. Can you help me?
Thank you.
 

A:Can connect to LAN but not on wireless network

Hey strings12. A bit more info on your equipment would be helpful.
1) What is the OS (Operating System) and Service Pack Level of your laptop, SP1,2,3 ?. rIght click on My Computer icon and select Properties
2) Are we talking about one laptop here?
3)Is your router secured and what encryption method are you using, WEP,WPA or WPA2
 

http://www.techspot.com/community/topics/can-connect-to-lan-but-not-on-wireless-network.198872/
Relevancy 19.78%

Hey guys

I have a problem with my laptop.
Sometimes the space bar, n and enter key stops working. When this happens, I can usually hit the button a few times and the key finally registers. It happens randomly and quite often. But sometimes I can type for hours without it happening.

I have not spilled any liquid on my laptop and I haven't dropped it. The problem started randomly a few months ago.
Does anyone know what could be causing this?

The laptop is an Asus K55V. It is nearly 3 years old

- Fred
 

A:Laptop keys sometimes don't work

Hey Fred,
Not sure if this might work that well, but give it a try! If it doesn't..go to a technician...its probably the best idea.

Shut down the laptop, removed battery and cable for a moment, press and hold the start button for 60 seconds... and replace the battery.. start the lap top.

Hope this helps!
 

http://www.techspot.com/community/topics/laptop-keys-sometimes-dont-work.205954/
Relevancy 19.78%

jobeard Hi jobeard In the beginning of the month you seemed to have solved this issue http www techspot com community topics internet-connection-through-ethernet-but-not-wifi You or someone else might be a great help for me as well since I have a similar issue At home I don t have access to wifi it says limited access although the internet is working fine by an ethernet cable at home In addition I do have access to wifi at work or in public places like a hotel I have already browsed the web but I still cannot figure it out An TCP wifi Limited but at home, other acces not places at IP Limited wifi acces at home, but not at other places reset did not work the drivers of my wifi adapter Limited wifi acces at home, but not at other places should be fine My system information - HP Elitebook - Windows Enterprise Edition bit - wifi router DrayTek Vigor AP this device acts as an access point that broadcasts wifi it is not the actual modem If you have any advice for me please let me know it is strange that I only have this wifi probem Is it maybe because there is an homegroup actually I don t know whether there is one Is it maybe because of the AV program I have McAffee but since it this the laptop from work I can t uninstall it I really don t know anymore I have included files with the output of the commands IPCONFIG ALL and ROUTE PRINT Thank you in advance nbsp

A:Limited wifi acces at home, but not at other places

Hello maarten747 ,

As far as I can see from the ipconfig output your laptop doesn't seem to obtain IP address.
You could try configuring one manually to test this theory. Something like: IP address 192.168.1.128, Subnet mask: 255.255.255.0, Gateway: 192.168.1.1, DNS1: 192.168.1.1, DNS2: 8.8.8.8 . Just keep in mind that the details listed here are just a guess as I'm not fully aware of the specifics of your home network and a static IP configuration for the wifi adapter is not a good idea actually, so once done testing change it back to obtain IP address automatically.

Also in what wireless operation mode is your DrayTek configured?
Do you have any other wireless devices that are connecting to the same DrayTek ?
When you connect your laptop with ethernet cable, is the ethernet cable connected to the same DrayTek or a different device?
 

http://www.techspot.com/community/topics/limited-wifi-acces-at-home-but-not-at-other-places.205603/
Relevancy 19.35%

What the title says. I bought a TP-Link WDR4300 and installed it, and everything works perfectly on every device except for my laptop (Windows 8.1 Lenovo G480, running Windows Defender as AV). When connecting wirelessly, I get access to the router, but it shows "limited", and it doesn't even let me get into the setup page (192.168.0.1) and when I ping it, every packet is lost. Ethernet, meanwhile, works perfectly. I'd appreciate any suggestions on how to fix it.

I'd like to attach the ipconfig outputs but my command prompt is in spanish and some of the characters are missing in the .txt file, too. I don't know how to get the file in english.

@jobeard I saw one thread you solved in which you said to mention you so you could help. I'd really appreciate it. Thanks beforehand for any and all suggestions.
 

A:WiFi doesn't work, Ethernet does

Hi, You will always have to use the ethernet (Cat 5) cable to get into your router's software, at 192.168.0.1, all routers are set up like that for security reasons.
It's done that way so that no one can change your settings, passwords etc using a wireless connection, you must use the Cat 5 cable to make setup & security changes.
Did you get any setup software with the TP Link router?
If you get good internet access using Windows 8.1 using the ethernet cable, it
might point to possible wireless driver issues.
It might be worth downloading the latest driver for your WDR4300 from the TP-link website;
http://www.tp-link.es/support/download/?model=TL-WDR4300&version=V1
 

http://www.techspot.com/community/topics/wifi-doesnt-work-ethernet-does.205530/
Relevancy 19.35%

My internet wont work, ive tried using both crome and IE but both browsers say that I am not connected to the internet despite the fact my computer says that I am connected to the internet. I know its not a network problem because my other devices are connecting fine. Also I tried connecting to the wifi at home and at school and it still does not work. My laptop is a HP ProBook 6390b and I am using windows 7. This problem started occurring after about 4 months disuse of my laptop which I think might be a factor as to why its not working. I have run windows updater and run a scan with my antivirus but still nothing helps. Thank you for any assistance in advance.
 

A:Internet wont work on laptop

Have you kept up and installed all the Windows 7 updates and are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/internet-wont-work-on-laptop.204944/
Relevancy 19.78%

I got a hp 6371it

link --> (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02054227&tmp_track_link=ot_faqs/top_issues/it_i...

I have this problem: I bought a kingston Dimm ValueRam 4GB DDR3 1333MHz Non-ECC CL9 (it is compatible with my mb according to hp website). I installed it on my pc and:
1) if I install just that ram it works fine
2) if I install that ram I bought and one ore both ram I had already installed in my pc it doens't work or it blocks on hp main screen or it appears the classic blue screen of hardware error and it never enter on windows (it asks for a system reinstallation)
what is the problem? should I do something else? I tried mounting rams in different slots, I tried everything

please help!!
 

A:Compatible ram don't work

Sound as though the ram you bought is not compatible with the existing ram. Is the ram you bought the same specs as the old ram?
 

http://www.techspot.com/community/topics/compatible-ram-dont-work.205230/
Relevancy 30.53%

About a week ago, our cable internet connection went out. Before I had a chance to reboot the modem & router, my 11 year old decided to completely reset the router to factory settings! Ugh! This caused several issues: my home network is now gone, only a unsecured factory network is available. When I try to plug my laptop into the router via ethernet cord (in order to login to router and setup secure network) my computer will not recognize the router and won't connect to internet. I tried troubleshooting with my cable provider and they say it's in my computer (IP address will not reset) and he recommended I replace my network card. However, today when I brought my laptop to work, it will instantly recognize the wifi at work. So is it really my network card that is causing issues? Please help, I'm desperate and not tech too tech savvy!

Details:
Linksys wireless router
Charter cable modem
Hp pavillion dv6 laptop with Windows Vista OS
 

A:Laptop won't connect to home wifi but will connect to work wifi

Did you figure this out?
 

http://www.techspot.com/community/topics/laptop-wont-connect-to-home-wifi-but-will-connect-to-work-wifi.204978/
Relevancy 18.92%

Hi can any one help I cant hear any sound on my laptop its all turned up but when I conect it to my tv the volumes fine but soon as I disconnet from the tv the sound ont go.
 

A:Audio wont work on asus x53u laptop

Did you fix this?
 

http://www.techspot.com/community/topics/audio-wont-work-on-asus-x53u-laptop.204577/
Relevancy 17.2%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp

http://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Relevancy 17.2%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
 

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
 

http://www.techspot.com/community/topics/solved-computer-doesnt-recognize-the-network-adapter.204750/
Relevancy 19.35%

Hi, hope I've put enough specs in profile for you to help. I have a Compaq Presario 6735s I bought around 2008. CPU quite slow but graphics card not bad so made decision to upgrade. Looked up the laptop manual here to find compatible CPUs for motherboard, socket type etc. Went through 3 different (*****ic) buys before I found one that actually fitted.
Now with everything reassembled, screen will flash up once upon powering on, then nothing. All usual lights come on, even my wireless connects, makes usual start up noises, fan, dvd drive etc ....
Proceeded to take everything apart again, re-connected everything I tampered with. Even RAM, which I didn't have to remove before.
Still same reaction starting up.

Really frustrated with myself as thought this would be the right one. Could honestly cry, haha.

I read the tutorial on here called 'No POST' to no avail either. I really hope it can come back from this.
One last thing I can think of (before pulling new CPU out) is upgrading BIOS to support new CPU but with no screen I am stuck.

Can someone please give me a little direction?
 

A:Upgraded CPU on laptop, now screen won't work

Did you re-install the old CPU to see if the laptop booted normally again? Upgrading CPU's on laptop motherboards can be a very difficult thing to do. What is supposed to be compatible in reality is not
 

http://www.techspot.com/community/topics/upgraded-cpu-on-laptop-now-screen-wont-work.204383/
Relevancy 19.35%

Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp

A:The ps/2 port of the motherboard doesn't work properly

No idea!!?
 

http://www.techspot.com/community/topics/the-ps-2-port-of-the-motherboard-doesnt-work-properly.204104/
Relevancy 17.63%

Sorry for that long title. Anyway, I was watching some YouTube videos when my wi-fi suddenly stopped worked. With this, I don't mean that I'm not catching signal from my router. I mean that my computer isn't receiving signal from any network. I don't know anyway to fix this, it never happened. I also won't buy a new computer. I got this on Christmas and I think that 7 months isn't that old. Also, the only tutorial I found doesn't applies to my computer (It was for a mac ). I have no idea of how to fix this and if you know, PLEASE HELP ME!!!!!! (If you are curious of how I am posting this, it works with Ethernet connection)
It's an ASUS computer with Windows 8.
 

A:My Computer Isn't getting signal from any Wi-Fi Network

Give the following a try and see if it helps:
Go to network sharing center - change adapter setting - click on wifi and then Diagnose this connection.

If this does not help, please let us know and we can suggest something else to try.
 

http://www.techspot.com/community/topics/my-computer-isnt-getting-signal-from-any-wi-fi-network.203822/
Relevancy 19.78%

So currently I have a modem in the living room Cisco EPC and then it goes all the way to my room to a Cisco WRTG V router Yesterday out of the blue it stopped working This is because I previously had routers in the network Asus and Cisco anyways I decided to disconnect my asus and use only the cisco but the router just won t work I reseted it to it s fabric settings But when I log into it it says the router s IP adress is And hands out IP adresses to my pc such as I have no idea what to do Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users MiKi gt ipconfig all Windows IP Configuration Host Name MiKi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search Router work won't properly List sbb rs Ethernet adapter Local Area Connection Connection-specific DNS Suffix sbb rs Description Intel R V Gigabit Network Connectio n Physical Address - B- - Router won't work properly -B - E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local Router won't work properly IPv Address fe d d ca Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday June AM Lease Expires Wednesday June AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -B -D -EB- - B- - -B - E DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter isatap sbb rs Media State Media disconnected Connection-specific DNS Suffix sbb rs Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d abd e a Pref erred Link-local IPv Address fe e a Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter TO Adapter Connection-specific DNS Suffix sbb rs Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ebd bbaa ebd bbaa Preferred Default Gateway c c DNS Servers NetBIOS over Tcpip Disabled C Users MiKi gt This is my ipconfig with the modem and this is with my router Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users MiKi gt ipconfig all Windows IP Configuration Host Name MiKi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Intel R V Gigabit Network Connectio n Physical Address - B- - -B - E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d d ca Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday June AM Lease Expires Thursday June AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -B -D -EB- - B- - -B - E DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BE - - BA - E- B A F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes C Users MiKi gt nbsp

A:Router won't work properly

Have you tried pressing the reset button on the router? (long press)
I have seen this 'reset button' on several router brands/models like tp-link (tl-wr941n, tl-wr740n old version, tl-wr740n newer version), buffalo draft-N routers, cdrking routers (made in china router brand sold in the Philippines).

if the reset process I described is the same as what you typed in your first post, try to manually change the router ip address.

my wimax modem ip address = 192.168.1.1
so for the tp-link wr-740 router, I use ip address - 192.168.0.1

login to your router and change it. if there's any save button, click it. my router prompts me to reboot the router. after a few seconds, the preferred ip address I have chosen is good for use.
(I have hidden my MAC address)
 

http://www.techspot.com/community/topics/router-wont-work-properly.203477/
Relevancy 17.2%

I have a HP 650 notebook that is in ok condition with Windows 8 OS. It uses a Ralink 3290 wireless adapter for my wi-fi needs. For the past three months, my adapter has been vanishing! I look at the indicator in my bar, and it shows no device available. I open up the Network and sharing Center and select the change adapter settings, and the only thing showing is an ethernet connection that I don't use. I can sometimes get the adapter to return by using the find and fix devices option on the search menu, but sometimes even that doesn't work. I've even been getting the "This device cannot find enough free resources (code 12)" message for the Ralink PCIe from the troubleshooter. while I did see an article on this elsewhere, I had some trouble understanding it. Can anyone help me figure out why this is happening to my laptop? Thanks for any help you can provide.
 

A:Vanishing Network adapter and resuorce problem

You might need to update and install the laptops chipset drivers. And also try to update the driver for your wireless adapter from the manufactures site or from the HP support page.
 

http://www.techspot.com/community/topics/vanishing-network-adapter-and-resuorce-problem.203293/
Relevancy 16.77%

I have an internet connection that I have extended to my Brother in law's house, next door. At the moment, I basically have two LAN cables coming out of my modem/router, one going to my computer and another, extended cable, going to his computer.
However, he wants to use his spare modem/router, which has wifi capability, to allow his son to use his own computer downstair with only wifi.
Therefore, will there be any conflicts if I simply splice in a Lan cable or add a lan socket for the second modem/router (wifi location.) at the appropriate point along Lan cable 2? See diagram below.
If there is a possibility of conflict what would be an alternate wiring method?

Thanks,
Tom.
 

A:Adding extra wifi (modem/router) to my already extended network

Good drawing and this will work just fine. In fact, that's what I use to get access at the far end of the house. Here's the trick;

router#1(lan slot) ---- (lan slot) router#2 with wifi​
Notice that #2 WAN slot is left empty! This places all systems on the same subnet of the router#1 {what you are doing is making router#2 act like a switch which has wifi support (y) }

* Give router# a unique LAN address (If #1 is 192.168.1.1, then make #2 192.168.1.1) This will allow each to be manage via a browser connection
* in router#2 disable DHCP. This forces #1 to be the manager of the entire network and it will handout all IP addresses
Personally, I use the MAC addresses of my devices to enable router#1 to use Address Reservation of IP address for all devices attached to #1 (ie I map the devices to the range 1.2-> 1.10)

Then set the DHCP range in #1 to 1.100-1.50
These will be used for all devices attached (wired or wifi) to #2

Optional:
All systems can then use the firewall to allow or deny access for one or both halves of the network. EG: I permit access for 1-10 and 255 while denying 100-254​ALL system must allow the top-end address 255 as that is the broadcast address that is used to hand out the DHCP data.
 

http://www.techspot.com/community/topics/adding-extra-wifi-modem-router-to-my-already-extended-network.203204/
Relevancy 24.51%

I am in an office building with 40 or so tenants. The entire building is wired to one central network (let's call it main network) controlled by SonicWall where each office has one live network drop. The main network is set up in such a way that tenants can plug in their own switches and routers if they want more network connected devices in their office. The office building has a network printer connected to main network where tenants can print to it. However, when tenants have their own routers in their office you cannot really connect to the network printer that is connected to main network. Is there something I can port, bridge or set-up where they can print to it?
 

A:Printing to network printer on another network

I think that as long as the tenant's router is connected to the main network they should still be able to access that printer provided that the WAN IP address of their routers is within the IP range of the main network where the Network printer is attached.
 

http://www.techspot.com/community/topics/printing-to-network-printer-on-another-network.203071/
Relevancy 17.2%

Greetings my fellow technologists I have routers and internet connection and want to set up a second wireless network using the Dual 1 Internet Creation with connection Network DDWRT same internet connection for VPN purposes The routers are Router A TPLink TL-WR N non DD WRT flashed Router B Linksys E DD WRT flashed Router A is connected directly to my company s network and works fine broadcasting DDWRT Dual Network Creation with 1 Internet connection its own wireless network BENMAO BENMAO s Router A configuration settings are below LAN IP LAN MAC BC-D - - - - A WAN MAC SAME WAN IP WAN SUBNET WAN GATEWAY WAN DNS I have connected Router B to Router A via Ethernet cable Port on Router A to INTERNET port on DDWRT Router B but get no internet access on Router B using DHCP with Automatic settings I am willing to change any settings and experiment to produce connectivity on the second network BENMAOVPN but don t know what to change in the protocol settings and there is very little information on Internet DDWRT forums It seems there are multiple DHCP DNS and IP conflict issues which I don t really have a good grasp of here The DDWRT router Router B is highly customizable but I admit I don t know whether to set is as an Access Point Client Bridge Bridge Repeater or Ad Hoc but I know I do NOT want to quot cascade quot the routers into wireless network Also Router B probably needs to be set to function as a Router rather than a Gateway When I replace Router A with Router B its just plug and play everything works fine and I can actually put all my devices on a wireless VPN so setting up the wireless VPN is not the issue its just getting Router B to accept the signal from Router A So bottom line is I need to know how to set Routers A amp B to share the Internet signal from Router A to Router B and then have Router B broadcasting a DIFFERENT network Thanks for any help in advance nbsp

http://www.techspot.com/community/topics/ddwrt-dual-network-creation-with-1-internet-connection.202411/
Relevancy 19.35%

Hi everyone,
I've bought a Sound Blaster Recon 3D a year ago.
It works awsome ! But this morning it was off the light and cannot work while plug in any computers.
I am very bored and nervous, I think it was broken down and cannot work anymore.
Am I right ?
Please say NO and help me
Thank you very much.
 

http://www.techspot.com/community/topics/my-sound-blaster-wirless-doesnt-work.202270/
Relevancy 19.35%

Hello My sound chip on my board was blew for no reason bad thing only being a month old bored and I am not waiting days to rma it and for me to get it back anyway I managed to pick up a old sound card not sure on the model Motherboard? Work. Not Maybe Did Sound Card that worked fine for three days then stopped outputing audio so I bought a sound card intex cmi that did not have the bit wndows dirvers and everytime I turned the computer off the machine would not detect the card I then I have to press the reset button or turn the system a few times to get the card to be recognized again and I could not also find the drivers for the OS Sound Card Did Not Work. Maybe Motherboard? I checked at the back of the cards box and it says bit pci bus master What does the mean could that be that the card was not compatible for the stystem or could it be the motherboard I tried a nvidia video card in the Sound Card Did Not Work. Maybe Motherboard? PCI-E slot and the card works fine with no faults The sound card was using the PCI slot and I tried every PCI slot My Motherboard asrock fm a x extreme Thanks nbsp

A:Sound Card Did Not Work. Maybe Motherboard?

I tested in a very old card from 2001 or 2004 something like that and it appears there's power going through the card so that's the plus.
Maybe it's because I'm using old crap and the sound card model is old?
 

http://www.techspot.com/community/topics/sound-card-did-not-work-maybe-motherboard.202240/
Relevancy 20.21%

I know the parts are overkill for what I will be using it for to serve media to TV phones and pc s it will also back up my pc s weekly file server and questions Home server ftp sync to an offsite location I will be testing things like active directory and VMware because I use these are work but I cant really mess around with them to much there The server is will be running Windows Server R or R I haven t made up my mind yet I want to be able to leave the server on but have it go into a sleep mode until something is requesting data from the server over my lan or internet I know how to do this but I don t know if its good to do with RAID these are the parts I m using If you have any questions please ask me anything Fractal Design Define Mini http www newegg com Product Product aspx Item N E Western Digital Red NAS Hard Drive WD EFRX TB x in RAID http www newegg com Product Product aspx Item N E Rosewill TACHYON- W http www newegg com Product Product aspx Item N E Mushkin Enhanced Blackline GB x GB http www newegg com Product Product aspx Item N E ASUS GRYPHON Z LGA http www newegg com Product Product aspx Item N E Intel Core i - Haswell GHz http www Home server questions newegg com Product Product aspx Item N E Adaptec RAID T http www newegg com Product Product aspx Item N E SAMSUNG EVO GB http www newegg com Product Product aspx Item N E nbsp

A:Home server questions

Have you got a UPS? What's your question.

Also can you please tell me how you do the sleep mode? WOL when something requests access?
 

http://www.techspot.com/community/topics/home-server-questions.200648/
Relevancy 19.35%

My laptop doesn't work with wifi when I first open it. It will show at the bottom of the screen that it is fully connected and has full bars, but when I open the internet the pages will not open. I must restart the computer and then it will work. How can I fix this?
 

A:Laptop doesn't work with wifi

When the WiFi is active, the laptop NIC should be disabled - - easy - - just unplug the the cable to the router.
 

http://www.techspot.com/community/topics/laptop-doesnt-work-with-wifi.201724/
Relevancy 17.63%

Hello, totally noob to phone networks. I am going to have a US version of Galaxy S5 and order an extra battery for it on mpj. Can I use both of them on overseas carriers? Thank you for any kindly help.
 

A:Can I use my phone on overseas network?

The specs shown here declare

Also known as Samsung GS 5
Available as:
Samsung SM-G900F - for Europe
Samsung SM-G900I - for Asia
Samsung SM-G900K/G900L/G900S - for Korea
Samsung SM-G900M - for Vodafone
Samsung SM-G900A - for AT&T
Samsung SM-G900T - for T-Mobile
Samsung SM-G900V - for Verizon
Samsung SM-G900R4 - for US Cellular
Samsung SM-G900P - for Sprint
​General 2G Network GSM 850 / 900 / 1800 / 1900


So yes, it is compatible with EU providers. Caution however; your current provider will bill you for roaming charges. When in Europe, I always buy a local SIM card and fund it with enough credit to last the trip - - that will also give you a local phone number. If you book theater events or need to call for reservations, they will be more likely to answer the phone.
 

http://www.techspot.com/community/topics/can-i-use-my-phone-on-overseas-network.201690/
Relevancy 17.2%

I ve read all I can about this online and tried everything I ve come across Since upgrading my internet same ISP the upload on my computer not any others on the network It ranges from megabits to If I boot into linux I get but that s far from the megabits the other Slow Problem: Bizzare Infuriating Upload Network computers on the network get But the strange thing is the problem seems to affect only certain programs My browsers are affected as the internet tests I do are from the browser OBS streaming software will not upload more then megabits about k However utorrent can completely max out my upload I ve tried stopping the WMI service and Bizzare Infuriating Network Problem: Slow Upload I have no traffic shaping software installed Here are my specs Operating System Windows Pro -bit CPU Intel Core i K GHz C Haswell nm Technology RAM GB Dual-Channel DDR MHz - - - Motherboard MSI Z -GD GAMING MS- SOCKET C Graphics SyncMaster x Hz LG TV x Hz MB NVIDIA GeForce GTX Gigabyte C Storage GB Samsung SSD EVO GB SSD C GB SanDisk SDSSDHP G SSD C GB TOSHIBA DT ACA SATA C GB Seagate Bizzare Infuriating Network Problem: Slow Upload ST DL - VT SATA C Optical Drives PIONEER DVD-RW DVR- L Audio ASUS Xonar DGX Audio Device Various Network info You are connected to the internet Connected through Killer e Gigabit Ethernet Controller NDIS IP Address Subnet mask Gateway server Preferred DNS server DHCP Enabled DHCP server External IP Address Adapter Type Ethernet NetBIOS over TCP IP Enabled via DHCP NETBIOS Node Type Hybrid node Link Speed Bps Computer Name NetBIOS Name CALVINS-PC DNS Name Calvins-PC Membership Part of workgroup Workgroup WORKGROUP Remote Desktop Disabled Console State Active Domain Calvins-PC WinInet Info LAN Connection Local system uses a local area network to connect to the Internet Local system has RAS to connect to the Internet Wi-Fi Info Wi-Fi not enabled WinHTTPInfo WinHTTPSessionProxyType No proxy Session Proxy Session Proxy Bypass Connect Retries Connect Timeout ms HTTP Version HTTP Max Connects Per Servers INFINITE Max Connects Per Servers INFINITE Max HTTP automatic redirects Max HTTP status continue Send Timeout ms IEProxy Auto Detect Yes IEProxy Auto Config IEProxy IEProxy Bypass Default Proxy Config Access Type No proxy Default Config Proxy Default Config Proxy Bypass Sharing and Discovery Network Discovery Enabled File and Printer Sharing Enabled File and printer sharing service Enabled Simple File Sharing Enabled Administrative Shares Enabled Network access Sharing and security model for local accounts Classic - local users authenticate as themselves Adapters List Killer e Gigabit Ethernet Controller NDIS Connection-specific DNS Suffix Home Connection Name Ethernet NetBIOS over TCPIP Yes DHCP enabled Yes MAC Address D - D- E-F - B- IP Address Subnet mask Gateway server DHCP DNS Server Network Shares Misc D Misc Finished Torrents D Downloads Finished Torrents Games D Games Games E Games Torrents E Downloads Torrents Video D Video Video E Video Current TCP Connections C Program Files x Google Chrome Application chrome exe C Program Files x NVIDIA Corporation Update Core NvBackend exe C Program Files Box Sync BoxSync exe C Program Files Hola app hola exe C Users Calvin AppData Roaming uTorrent uTorrent exe C Windows Explorer EXE G Program Files x Nightly firefox exe G Program Files x Razer Razer Game Booster main exe G Program Files x Samsung Magician Samsung Magician exe G Steam Steam exe hola svc exe hola updater exe KillerService exe lsass exe NvNetworkService exe nvstreamsvc exe services exe svchost exe svchost exe svchost exe System Process System Process wininit exe nbsp

A:Bizzare Infuriating Network Problem: Slow Upload

I figured it out, the Killer NIC on my Z87GD65 mobo was not compatible with NetLimiter. Uninstalling it fixed the problem
 

http://www.techspot.com/community/topics/bizzare-infuriating-network-problem-slow-upload.201410/
Relevancy 17.2%

Hello, I'm new here. I'm trying to fix my sons Asus laptop. it won't connect wirelessly but will connect via ethernet cable. device manager has exclamation point beside network controller. I cannot download drivers for it. can you help?
 

A:Asus X53E network controller issue/no wireless

"I cannot download drivers for it"... Why? Can you get the driver from here:
http://support.asus.com/download.aspx?SLanguage=en&p=3&s=114&m=X53E&os=&hashedid=mDFYFQWEpTitMwA6
If the driver won't install, the Wifi card may be bad... Something that doesn't happen very often
 

http://www.techspot.com/community/topics/asus-x53e-network-controller-issue-no-wireless.201175/
Relevancy 39.56%

I hope this is the right section to ask this question in. I'm a big newbie.
I'm having an issue that I have no clue how to solve. There is a specific webpage that I try to view at home with my laptop, and it never loads on Chrome and Firefox, but does on Explorer. But when I take the same laptop to work or school, it does load that website on all browsers. I also have a desktop that stays home, and has the same problem. Its so strange. I don't know if it's a network thing, or an facebook app thing.

I've tried re-installing Chrome, deleting all cookies and caches, disabling all extensions or plugins, and updating Flash and Java. Any ideas?

Mod Note: Facebook game link removed, you are too new to be trusted fully. Problem m ay be solvable without the exact game anyway.
 

http://www.techspot.com/community/topics/website-works-at-work-not-home.201025/
Relevancy 17.2%

We have a problem with the connection to our server. The server disconnects randomly from minutes to hours all day. I am at a remote location and connect via logmein to a local pc at the servers physical location to remotely control and connect to the server. A month or so ago the connection would drop every few minutes. The staff at that location replaced the switch and had the ISP tech check out the router. No problems were found. I think it is a problem with the server itself but don't know what it could be. Typically I can go through the login process and reconnect. I'm sorry I can't be more specific about the equipment since it is 40 miles away. Any suggestions on troubleshooting? Remotely?
Clearly I'm not a network guy.
Thanks for any help or direction
 

A:Network connection to server disconnects constantly

The usual suspects are:

(for DSL connections only) missing or faulty line filters
need to update the router/modem firmware at your end
packet reassembly overflow(a)
(a) very techie, but the solution is easy; see this description
 

http://www.techspot.com/community/topics/network-connection-to-server-disconnects-constantly.200706/
Relevancy 17.63%

When I am accessing wifi network I get dns failed error message. what is the problem? pls help
 

A:DNS failed error in WiFi network

Can you connect using a wired connection?
Get a command prompt and enter
ipconfig /all >myTCP.txt​then open that file, copy the contents and paste into your follow-up
 

http://www.techspot.com/community/topics/dns-failed-error-in-wifi-network.200577/
Relevancy 17.2%

Hello. I am a complete newbie to server administration. At my current job, I have been tasked with setting up a deployment server. The server is a Windows 2008 server and is not connected to the Internet. The server is a domain controller on its own domain (different from the main domain my job uses). How would I connect this server to the Internet without disrupting other users on the network? By disrupting, I mean connecting to my server instead of the main server for DNS and DHCP. The server has Active Directory Domain Services, DNS, DHCP, and WDS roles set-up.
 

http://www.techspot.com/community/topics/connect-server-to-the-internet-without-disrupting-other-computers-on-network.200167/
Relevancy 19.35%

Hello! I live in a college apartment (so no access to router). When I hook up my ethernet cable to my computer, all of my messengers work and are connected but I cannot use internet browsers. I recently reformatted my computer and was using a wireless adaptor, but here the internet is so slow that there's really no point and for a decent connection you need to be plugged into the wall. The wall connection worked fine until I reformatted.

This happened before when I moved to my first college and had to use the ethernet cable. I've done everything from messing around with internet explorer proxy settings and whatnot, but what did work was something I found in a thread. It instructed me to go somewhere and delete a file that was blocking the internet part, I guess? I deleted this setting/file and the ethernet connection worked just fine afterwards. I can't find this thread (probably not on this website) anymore. Does anyone here know possibly what the file was?
 

A:Help locating a file to help my ethernet work again

Check for optional Windows Updates, specifically a network driver. The most common name is Realtek.

And/or try installing this driver. - Software: Drivers & Utilities

If still no go, which computer do you have?
 

http://www.techspot.com/community/topics/help-locating-a-file-to-help-my-ethernet-work-again.200022/
Relevancy 17.2%

Recently my network storage device has stopped me from accessing folders with the exception of music. All my pictures for the last 11 years are on it and not backed up anywhere else. Cannot find manual and have done reset but cannot remember URL to setup or admin username and password. Doesn't seem to be online and Edge is giving me no help whatsoever.
 

A:Edge DiskGo 3.5" network harddrive

Ouch if this is a NAS Device or has an IP you can use an app called FIng for your mobile device to find its ip so you can put it in the browser and get to the gui site. If you cant try fing you can use angry ip scanner for winwdows to find its ip.

If you want to try and recover files I would try recuva to obtain any data that has been lost. I am not sure if it is lost or just changed in the mapping.

As most guys will tell you here its very good idea to have three forms of back up. Local, external and online. If you don t know how to use fing or any of the software I duscusses please let me know. I will have links to the downloads below. Goodluck.

http://angryip.org/w/Download
For Fing just type in Fing in either google play or Itunes.
For Recuva: http://www.piriform.com/recuva/download/standard
 

http://www.techspot.com/community/topics/edge-diskgo-3-5-network-harddrive.200015/
Relevancy 19.35%

I am using windows 7 and my webcam is not working,whenever I tried to use to it says "webcam not detected ". even it is absent in device manager and I hope someone will help me to solve the problem.
 

A:Dell integrated webcam won't work

What is the exact brand and model # of your laptop?
 

http://www.techspot.com/community/topics/dell-integrated-webcam-wont-work.199619/
Relevancy 17.63%

Hi I m having a problem that I gather is fairly common with Windows machines but I haven t been able to find the same case in other threads nor a workable solution among similar cases I have two Windows computers the main laptop on Win and a hybrid tablet on Win I would like drive Win8.1 Trying connect to network to a for both devices to be able to access each other via my home network So for both devices I ve set the network settings to home private I turned on file sharing and discovery and even joined both devices to the same homegroup The end result is that my Win tablet can access my Win laptop both through the homegroup and through direct network access The problem is that my Win laptop cannot do either of those with regard to the tablet in all Trying to connect to a Win8.1 network drive cases I get the network error message that I cannot access the location and should check it for spelling To try to solve this issue I have attempted -Turning off the Windows firewall on my Win tablet -Looking around to see if I could find my Win tablet to unwittingly belong to some sort of domain have not been able to figure that out The odd thing is that I also tried to test out the network by setting up iTunes on both devices and setting them to share their music libraries via home share and sure enough both devices could access each other s libraries Similarly I was able to access my tablet from my Win laptop through a Remote Assistance invitation Would very much appreciate any advice I can get here Thanks in advance nbsp

A:Trying to connect to a Win8.1 network drive

Which Windows 8.1 tablet is this Pro or RT? RT your can't not x86 or x64. Pro you can. Disable Homegroup. Use Workgroup and call it something other than Workgroup like: DANET for example
So do this on laptop and tablet. On laptop make sure the folder is shared out to you the admin or your name example Dan.

So you should have local account on your system called Dan with admin rights. Back on the tablet side you need to create a local account. Did you setup Microsoft account so your login with that account only. You need to create a local account and start using that. It can be done to access the Microsoft account while being on local account while your at home.

If away from home then sign on to Microsoft account to access the cloud features. Or still use the local account and have Microsoft account to access store and skydrive (aka onedrive).
 

http://www.techspot.com/community/topics/trying-to-connect-to-a-win8-1-network-drive.199866/
Relevancy 19.35%

Just got the new mouse home, but to enable aim precision and other programmable buttons and need to get the drivers. When I try to download them it says plug in the device, which is already plugged in and I have also tried in different usb ports and safe mode. Anyone with this mouse got it to work?
 

http://www.techspot.com/community/topics/mad-catz-rat-7-mmo-mouse-drivers-wont-work.199725/
Relevancy 19.35%

I have a headset set with a mic. It has 3.5mm plugs for the mic and the speakers. Just recently they stopped working together. What I mean is if I have either one of them plugged in, that one works. If I have both plugged in, the sound manager appears as if neither of them are plugged in. I've tried other headphones with the jacks and get the same result. I've tried reinstalling the driver, doing a system restore and using CCleaner to clean my registry. I've also messed around with just about every setting in the audio manager. Anyone have any ideas? It's odd that they work independently, which leads me to believe that the insertion detection is working just fine.

I have a Toshiba Satellite R845-S95 with Windows 7.
 

A:Headphone and Microphone Jack won't Work Together

Turn off the insertion detection on realtek. Top-right corner somewhere, from memory.
 

http://www.techspot.com/community/topics/headphone-and-microphone-jack-wont-work-together.199662/
Relevancy 17.2%

Hello Everyone !
Right now I am using a broadband connection as my Internet connection and I have a dsl modem which is wi-fi capable. Two of my frnds share the same Internet connection through wi-fi. The problem is whenever any of us watching YouTube videos or downloading something, the whole speed is consumed by that particular computer. I know that many new modems have the capability to limit the bandwidth usage these days but mine is an older one. So I was wondering if there is any way I can limit the bandwidth for each computer.
Thanks !
 

A:How to limit the bandwidth for each computer on a wireless network?

You have to have a modem you can log into an has that type of feature. If you are wired into the network, you should be able to limit the wireless bandwidth and keep your wired bandwidth up. Normally go into the modem, go to setting and wireless setting to limit it.
 

http://www.techspot.com/community/topics/how-to-limit-the-bandwidth-for-each-computer-on-a-wireless-network.193175/
Relevancy 20.21%

Couple days I got new a case Corsair Graphite 230T Orange. I installed mother board P8Z77-V LX, new cooler Evo212. I THINK I installed the motherboard right in the case. I had to remove 1 pin that was blocking the placement of the board.

http://tinypic.com/view.php?pic=pvyjc&s=5#.UuQzWxA1iUk
 

A:New case possible short circuiting home

There is 1 board mounting post that needs to be left out from time to time. I even believe I've seen phenolic, or some type of composition pins to be put in that position.

If you look carefully at you board, you may be able to spot the position, by the lack of ground tracks running to it.

Best I can do. BTW, I don't really trust any thing to do with "tinyURL" or similar links. No offense intended.
 

http://www.techspot.com/community/topics/new-case-possible-short-circuiting-home.199656/
Relevancy 19.78%

I have a SONY Handycam that uses MP120 8mm Video Cassettes. I used this Handycam to tape home videos. When I use the playback feature on the Handycam it seems as if it is playing back in a slower speed. When I connect the Handycam to my computer and play back, it does the same thing. It is as if the camera was recording at a wrong speed. Is there any way I can control the speed of the video camera via computer, so that I can get the home videos transferred to DVD?
 

http://www.techspot.com/community/topics/8mm-home-video-playback-wrong-speed.199460/
Relevancy 18.06%

Hi there Tech Forum thanks in advance for your help - I have a question about a LAN and stuff There is a modem and a wireless router with LAN ports In one of them there is conected also a switch Network LAN Question with LAN ports - Some weird things have been going on I always get a wireless connection so LAN Network Question no problem there Issues appear with the wired network On one hand I had many times an unidentified network a x x x ip and no LAN Network Question network Nothing changed in configuration on my box or the router and got to connect at MB s while if connected through wi fi I got LAN Network Question more than MB s From a moment on again unidentified network and no signal in the adapter a yellow light would blink quick So now after touching the cable and a little bit of despair not driven to the computer by the way I have a full conection by lan and by wi fi both at a good speed AND weird for me a green light on and the same yellow blinking - So main questions are - What does the green light ON not blinking means - Could there be a difference due to the cable manipulation - Is there a gost inside my router D Thanks a bunch to all of you I try my best to understand computers so now I am happy with the connection but curious on the rest - Regards nbsp

A:LAN Network Question

How new are these devices? Are you using new 'patch' cables? Is DHCP running on only one of the devices? Seems weird that "touching the cable" caused a change.

1. The LEDs differ, but usually one signifies a connection [on/off] and the second signifies activity [blinking]
 

http://www.techspot.com/community/topics/lan-network-question.199370/
Relevancy 20.21%

I've been putting together this build as my first gaming PC and I'm wondering will there been any compatibility issues between any of these parts?

My budget is roughly: 500 / $800 / ?600

Case:
http://www.scan.co.uk/products/zalm...-internal-35-x5-external-35-x1-internal-25-x1

PSU:
http://www.scan.co.uk/products/500w-storm-silent-lpj19-25-eps-12v-quiet-fan-atx-v20-psu

RAM:
http://www.scan.co.uk/products/8gb-...1600)-non-ecc-unbuffered-cas-9-9-9-24-xmp-15v

HDD:
http://www.scan.co.uk/products/500gb-toshiba-dt01aca050-35-hdd-sata-iii-6gb-s-7200rpm-32mb-cache

Motherboard:
http://www.scan.co.uk/products/giga...r3-sata-iii-6gb-s-sata-raid-pcie-20-(x16)-atx

GPU:
http://www.scan.co.uk/products/1gb-...pu-1000mhz-640-cores-dp-dl-dvi-I-hdmi-plusmou

CPU:
http://www.scan.co.uk/products/amd-...re-s-am3plus-38ghz-8mb-total-cache-95w-retail

Optical Drive:
http://www.scan.co.uk/products/lite...dvdplusrw-x8-rw-x6-dvd-ram-x12-sata-black-oem

Wireless Card:
http://www.scan.co.uk/products/asus-pce-n15-pcie-300mbps-80211b-g-n-wireless-adaptor-low-profile

Any advice is appreciated
Thanks
~Jack
 

A:Will this PC work?

That's a pretty sketchy power supply, I wouldn't use it.
That is OK, but I think it would be easier for you if you just got a wifi enabled motherboard.
 

http://www.techspot.com/community/topics/will-this-pc-work.199362/
Relevancy 36.98%

A colleague at work would like to set up either a SHN or a SBN. What is the best way to go about this? Would it be best to be safe to be cloud based? What equipment is needed etc...?

This will take some discussing, so please ask any questions you need. The intention would be for two/three people to access the information on the network initially. A printer will be shared on the network, allowing scan to email. Laptops would be used to access the network from external sites, this is why I'm thinking of going the cloud based route, so they can log on and access the server from anywhere in the world...

Any help/guidance is appreciated.
Thank You!
 

A:Setting up a small home/business network

Yes, you can consider the Cloud as a solution for access, BUT . . .
it also brings with it issues like:

security
privacy
backup
ownership
You should start reading about these issues before committing to this solution.

One alternative would be a NAS device connected to your router. Putting your modem, router and NAS on a UPS power system would allow (with proper configuration) external access and you have total control, of all of the issues above.
 

http://www.techspot.com/community/topics/setting-up-a-small-home-business-network.198198/
Relevancy 18.06%

I woke up this morning and my laptop is having trouble connecting to the internet However internet worked on other laptops and devices so it must be the laptpo s problems I Network Unidentified looked up the problem and I eventually get to a point where I figure out I need a new ip After typing ipconfig renew it says Windows IP Configuration No operation can be performed on Wireless Network Connection while it has its media disconnected An error occurred while renewing interface Wireless Network Connection Unidentified Network The sup port for the specified socket type does not exist in this address family No operation can be performed on Bluetooth Network Connection while it has its m edia disconnected No operation can be performed on Local Area Connection while it has its media di sconnected I don t know what to do now Please help Windows IP Configuration Host Name Username Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Virtual WiFi Miniport Adapter Physical Address E - -FE- A-B - DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Atheros AR b g n WiFi Adapter Physical Address C - -FE- A-B - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d ca Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Unidentified Network Gateway DHCPv IAID DHCPv Client DUID - - - - - F-BD-FD- - A-B - F- -BC DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Ethernet adapter Bluetooth Network Connection Media State Media disconnected Connection-specific DNS Suffix Description Bluetooth Device Personal Area Network Physical Address - - - -A -DA DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address - A-B - F- -BC DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap BEE - C- F F- -D B D BD Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter TO Adapter Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled YesAnd here s the ipconfig all just in case nbsp

A:Unidentified Network

Wireless? Your laptop isn't getting an IP address is the cause of your issues. Find out of the router has enough allocation.
 

http://www.techspot.com/community/topics/unidentified-network.198148/
Relevancy 19.78%

The n key had been not working properly and now it stopped all together. I took the key off and tried pressing the white piece of soft plastic but nothing shows up. Is it time to get a new keyboard or is there something else to try? It seems like such a waist to throw out a keyboard when 1/100+ keys stopped working.
 

A:1 key on keyboard doesn't work

Try it on another PC and see.
 

http://www.techspot.com/community/topics/1-key-on-keyboard-doesnt-work.197264/
Relevancy 17.63%

Hi I What to fail my workgroup causes network have four pc s connected through a GX-D ASUS switch which is now a few years old Two of the pc s have just been upgraded to windows the other two are on windows Also into the switch goes my BT broadband router and my network hp printer n Suddenly I am losing the complete network during normal use Instead of having green lights on my switch one of them goes amber and another has no light on at all If I unplug the switch from the power and then power back up all the What causes my network workgroup to fail lights go orange What causes my network workgroup to fail and then turn to green and the network comes back on This has never happened before until today and it has happened twice really frustrating I am not very techy and think the switch has became faulty Should I go buy a new switch or might it be something else Need it explaining in layman terms please as I don t have a clue Thanks for your help nbsp

A:What causes my network workgroup to fail

Hi Shelley123. If your router has at least 4 Ethernet ports at the rear, there is no need for a switch as you have 4 pc's. If your "router" only has 1 Ethernet port, what you have is a modem. Normally, your Internet signal comes in and goes to a modem first, and if you have more than 1 pc or devices that need wireless connectivity,you would connect a wireless router to that single modem port and connect your 4 pc's to the 4 ports found on most routers.If you had at least 5 devices that need to be connected by Ethernet cable, you would use a switch which you would connect to one of your router's ports, then connect the fourth pc and any other Ethernet device to one of the 4 or more ports on the switch. Are you sure you are using a switch and not a hub? Could you tell us what other hardware you have in your network besides your 4 pc's which you connect by Ethernet cable?
 

http://www.techspot.com/community/topics/what-causes-my-network-workgroup-to-fail.197556/
Relevancy 36.98%

If I'm able to, how would I go about running a network hub from an existing port on the router?

I.E. Modem->Router->PCs/Hub->TV/PC

In theory I'm trying to run a wired connection to my room and have the ability to have my PC/TV and any other devices connected to the network physically, my wireless strength isn't exactly good and it's very inconsistent at best when it comes to my internet speeds makes it a bit harder to watch Netflix/Play games.

Any insight would be wonderful!
 

A:Question about a home network using a Linksys WRT54GS2

Modem > Router >

Then use a LAN port on the router to connect to a LAN port on the hub.
 

http://www.techspot.com/community/topics/question-about-a-home-network-using-a-linksys-wrt54gs2.197409/
Relevancy 17.63%

Networked for years in XP machines.

I read help files how to but, could not make it work.

My w8 win wxplorer list shows under Network the VISTA LAPTOP. When I click on it it asks for user name/password but, what name & password?.

I naver had any name/password for my networks.

Any body knows what does it refere to?
 

A:Failed to network w8, xp & vista

Hey nichos. Was a name and password used when this Win8 system was first set-up. When I first unpacked a WIN8 laptop, it threw me for a loop as it requires a username and password to unlock it.
 

http://www.techspot.com/community/topics/failed-to-network-w8-xp-vista.197366/
Relevancy 17.63%

I am stuck Also I apologize in advance if this is not in the right forum I am trying to work on a friend s Windows desktop PC Dell Inspiron at my house but I cannot connect to my home network or the internet to download network Cannot or to PC connect internet malware scanners removal tools updates to MBAM etc First I was trying with a wireless adapter that it known to be good The network sharing center would say it was connected to the network but there was no internet connection Then I tried plugging in an Ethernet cable The network sharing center just kept saying quot searching for network quot but never would connect I tried disabling then re-enabling the network adaptor and I reinstalled the driver Networking is not my strong suit so is there some setting I may be overlooking It appears the PC on which I am working is already part of a homegroup do I need to leave that group then try to join my existing one set up through my own Win amp PC I don t care about sharing files across Cannot connect PC to network or internet the network in fact I prefer not to in case this thing really is infected I just want internet access on this machine Could some sort of malware be blocking access I sort of doubt this since it was working fine at their home before they brought it to me I could not find any router settings or firewall entries that appeared to be blocking access ZyXEL PK Z DSL modem router provided by CenturyLink Do I need to call my ISP tomorrow Thanks again this community has always been helpful to me nbsp

A:Cannot connect PC to network or internet

Make sure the adaptor isn't set to 'share connection'.

Try using a static IP.
 

http://www.techspot.com/community/topics/cannot-connect-pc-to-network-or-internet.197294/
Relevancy 19.78%

I don t get why my touchpad doesn t work when I unplug or turn off my mouse I found all the settings I realize I may get an answer I don t want Download drivers etc I can live with this problem unless I suddenly don t have my other laptop especially after spending the night searching for downloading and installing drivers for doesn't work Touchpad my other laptop I was surprised to find that the windows professional my home machine is windows home didn t provide me with network and Touchpad doesn't work other drivers I wasn t seeing any wireless connections Initially I was using an internet stick and the problem wasn t visible I take that machine out with me I had it home last night and that s when I found the problem And trying to get that touchpad driver had me wondering about this one I don t use my laptop keyboard on my home machine preferring a natural contour full keyboard I plug in so I never deal with the touchpad otherwise I d be hitting it all the time which I used to do I am a mouse guy If I had to to take this machine out the touchpad thing would drive me nuts Any thoughts nbsp

A:Touchpad doesn't work

Hi Aarby,

Some computers have keyboard shortcuts which could be a separate key on the keypad or a combination of the Fn + any other Function key depending on the system model for enabling or disabling the touchpad. Since you have not mentioned the system model of your computer, some steps you may try are:

1.Go to Control Panel > Mouse > Device Settings>Click Enable (if disabled).

2.Check under Mouse Properties in Control Panel>Hardware>Mouse. There may be a check-box for Disable Touchpad/Pointing Stick when external USB mouse is present. If this is checked and you connect an external mouse to your laptop, the touchpad may be disabled.

Additionally, we recommend you check the system manual or try some of the steps mentioned in the link below.

Click on this Microsoft link to troubleshoot Mouse, touchpad, and keyboard problems in Windows: http://dell.to/1arqGvz

Hope this helps resolve the issue. Please reply if you have further queries.

Thanks & regards,
Babita G
#iworkforDell
 

http://www.techspot.com/community/topics/touchpad-doesnt-work.197125/
Relevancy 17.63%

I have started to route CAT e cable to make a wired network I have a server running Server a custom desktop running windows laptops running windows I have the modem and the wireless router in issues to connecting network Having a server the library I have the modem connected to the internet port of the router and one of the loads is connected to a wall jack that Having issues connecting a server to network connects to a cable that runs about feet to its termination This termination is connected to a Having issues connecting a server to network port switch Having issues connecting a server to network The server is connected to the switch directly Based on my understanding my server should have access to the internet and my network should have access to my server With this setup I have full internet access on every machine but the server and I cannot access the server from any computer I have hooked up the server to a second wireless router as a load and was able to successfully access it through the second router but there is no internet The network on the server shows up as Unidentified Limited Access when directly connected to the switch Has anyone seen this before or have an idea to fix this issue nbsp

A:Having issues connecting a server to network

Load? It'd be easier if you drew a diagram. Some of the info is missing.
 

http://www.techspot.com/community/topics/having-issues-connecting-a-server-to-network.197147/
Relevancy 19.78%

OK, I know it's weird, but I need to run 32-bit XP SP3 on this board. Anyone know for sure if it will? Asus specs don't list XP but drivers seem abundant for it.

Thanks for any help !!!
 

A:Asus P9X79-E WS and 32-bit XP SP3 - Will They Work?

I can't make any promises, but I'd be highly inclined to think it would probably work, just from the fact that ASUS listed drivers on their website for Windows XP; if the board wasn't supported, wouldn't they simply not allow you to choose it as an OS selection when downloading drivers? Maybe when they omit XP from the supported OSs list, it's only because it's not fully supported, in terms of long-term updates, even though the OS works. Again this is just speculation, but I don't see a good reason why it wouldn't work.
 

http://www.techspot.com/community/topics/asus-p9x79-e-ws-and-32-bit-xp-sp3-will-they-work.196790/
Relevancy 18.92%

I built my first custom PC a month or two ago, and this is the first problem I've encountered.
I live in an apartment complex that provides their own ISP, so my PC has been plugged straight into my ethernet port in my wall (no router). It's worked perfectly until just today.

In the bottom right corner, my computer is telling me that I am connected to the internet, but nothing's working...I really hope it's not a problem with my motherboard.

The thing is, every other device, wired or wireless, in my apartment obtains internet, so I feel like it has to be something with my computer. It was working fine last night and I came home today do start homework and it wont connect.

I'll provide whatever information may help with solving this problem. Anything at all would be appreciated.
Thanks!
 

A:Computer says connected, but i get no internet. Other dives in the apartment work fine

Hey mattyg. A few questions.

Are you just using one browser or do you have the same issue when you try a second browser?

If another pc in your apartment connects and gets on the Net via Ethernet cable, is it using the same wall jack?

Is the wireless connection your wireless device connects to coming from your building's Internet connection, or could it be connecting from some other network?

What message do you get when your browser opens and cant make a connection to the Net?
 

http://www.techspot.com/community/topics/computer-says-connected-but-i-get-no-internet-other-dives-in-the-apartment-work-fine.196947/
Relevancy 19.35%

Hi everyone

I have HP dv7 2015tx running windows 7 (64bit) and I have serious problem with wifi connectivity. in last few months the wifi connection started to malfunction and randomly detect and connect to hotspots. and then it stopped working completely after a while. I tried:

-reinstalling, upgrading .... the wireless driver
-using wifi dongle
-replacing the wifi card with a new one
-.....
and I found these can not help me in this issue. the same thing happened to my blutooth connectivity last year and after I reinstalled the windows it was all fixed. but this time im not planning to reinstall the windows again.
So in my point of view this problem might be fixed if I fix the way windows is detecting any wifi access !! is there any file missing in windows related to this ?!!


Please help me in this matter
 

A:WiFi adapter does not work on my laptop

Do you have a wifi router and that's causing you these problems
OR
are you having issues with accessing hotspots?
 

http://www.techspot.com/community/topics/wifi-adapter-does-not-work-on-my-laptop.195037/
Relevancy 17.63%

Hi I'm new to this site and I'm hoping I can find some answers here. My PCI-e Wifi adapter is working, and I'm able to connect to a wireless access point fine. But when I open my browser and go to google, it will not load. And evetually it says "No network connection."
However, if I plug a different adapter in, everything works perfectly fine.
One weird thing about the first adapter is that sometimes if I refresh the router, it will connect for like five seconds. Then stop working again. The device is fine, and system tray icon for wireless has no warning or disable indication.
 

A:Network card working but no internet

Power cycle the modem
unplug the router from ac and modem and wait for the router lights to flash and are ready
Power on the router and connect it to the modem
Go into the router and make sure under WAN (internet) it gets the DNS from the ISP there should be two of them listed. If you see 0.0.0. or 192.168.x.x then the Router is not communicating correctly with the modem.

If you see this the router would need a factory reset and re-run the setup again.
If all looks good but it's the PC that not connecting

Open up a dos session prompt run as Admin

Under dos prompt
type: ipconfig /flushdns

or



ipconfig /flushdns
nbtstat -R
netsh int reset all
netsh int ip reset
netsh winsock reset
sc stop Dhcp
sc start Dhcp
sc stop Dnscache
sc start Dnscache

reboot your PC
 

http://www.techspot.com/community/topics/network-card-working-but-no-internet.196381/
Relevancy 17.63%

Hey all After shutting down my laptop running Vista the Unidentified Internet no network, connectivity next day I couldn t connect to the internet It connects to the network but says Unidentified network, no Internet connectivity quot unidentified network quot and there is no Unidentified network, no Internet connectivity internet connectivity Now another laptop in my house connects the network fine and internet is working perfectly So it is this laptop causing hassles I don t want to presume but it may have something to do with uninstalling AVG I tried to Unidentified network, no Internet connectivity install AVG day trial and the install failed for some reason I thought it might be some problem to do with older previous AVG versions on the laptop There was no AVG on the add remove programs function in control panel but after seeing bits of AVG over the C drive I downloaded and used AppRemover to completely remove AVG It found AVG or I can t remember exactly and I uninstalled it with that I hibernated the computer a few times and think this was the first time I had shut down the pc since finishing this uninstall Next time I booted up my internet connectivity doesn t seem to be working Just speculating on what the cause of the problem is so am open to any suggestions grinthumb Any help with this would be amazing grinthumb nbsp

A:Unidentified network, no Internet connectivity

Try CCleaner and do a registry sweep.
 

http://www.techspot.com/community/topics/unidentified-network-no-internet-connectivity.178319/