Windows Support Forum

Gigabyte X58 UD4P RAM Upgrade

Q: Gigabyte X58 UD4P RAM Upgrade

Hey guys

I have been running a Intel Core i7 CPU 920 with a GA EX58-UD4P and still is all running perfectly well. Anyway I am running 6gb of triple channel ram and just need an upgrade and just wondering what to get? Is there any triple channel kits? Is there still any RAM out there that is compatible with this motherboard?

All the manual says is;
6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory
Dual/3 channel memory architecture
Support for DDR3 2100/1333/1066/800 MHz memory modules

I don't really mind if its not triple channel just looking for some recommendations as I know the 1366 pin motherboards where discontinued a long time ago.

Thanks

Relevancy 100%
Preferred Solution: Gigabyte X58 UD4P RAM Upgrade

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Gigabyte X58 UD4P RAM Upgrade

There's still triple channel memory kits out there, or at least there are where I live.

Failing that just get 3 identical sticks of RAM, ideally the same manufacturer/model as your current 6GB.

http://www.techspot.com/community/topics/gigabyte-x58-ud4p-ram-upgrade.194575/
Relevancy 84.71%

I just did a fresh install of windows XP SP3 and everything was dandy until, i tried connecting to the internet. I installed all of the drivers, but the Realtek Realtek PCIe LAN Driver, partway through the install gave me an error message:

"The RealTek Network Adapter/Controller was not found.
If Deep Sleep Mode enabled Please Plug the Cable."

I've spent hours trying to research a fix for it, but I'm RAGING!
If any other additional information is needed, please ask.

(EDIT: I'm not sure if this is the right board to post on hahaha)

A:Gigabyte P55-UD4P Ethernet problems.

what kind of computer is it?
what model mobo?
Is this NIC integrated or addon?

http://www.techsupportforum.com/forums/f10/gigabyte-p55-ud4p-ethernet-problems-505650.html
Relevancy 84.71%

Hi. Im looking to open cores 3 and 4 on a kuma 7750 X2. this could be done by setting in BIOS option ACC to auto and EC firmware to hybride.
now I flash my board to the new bios f5a with succes but the option EC firmware is missing. any idea?
 

A:gigabyte ma790x-ud4p bios f5a

how do u open the 3rd and 4th cores on a kuma???
are u following a online guide or ?
 

https://forums.techguy.org/threads/gigabyte-ma790x-ud4p-bios-f5a.838196/
Relevancy 83.85%

Hi i am running a on board sound card on my GigaByte MA790XT with logic tech X-240 speakers and my speakers have been cutting out a little bit its hardly noticeable its almost like a small cracking sound. These speakers are brand new? Is this windows 7? i am downloading the lastest realtek audio drive for windows 7 to see if that works.

anyone else have this problem?

A:(bad Sound) GigaByte MA790XT-UD4P on Win7

its almost like these speakers are distorting and they are brand new?

http://www.sevenforums.com/sound-audio/18856-bad-sound-gigabyte-ma790xt-ud4p-win7.html
Relevancy 82.99%

Recently I bought a AMD Phenom II x4 Quad Core 3.0ghz 940 Deneb Black Edition and a Gigabyte MA790X-UD4P motherboard. I upgraded from a AMD Athlon 64 x2 4400+ and a Biostar NF520-A2.

Now I'm having a problem with my RAM, It's doing so much more work, even on the desktop. It's using 35% on the desktop (Says Vista's Sidebar Gadget) and about 92% when I play the Sims 3. I never remember using this much RAM power, but my computer has freezed more often, whether it's random 'deleting files, or copying/pasting' or just trying to browse the web in Mozilla. The most random times can it freeze a program, but it hasn't froze Sims 3 yet.

My CPU usage is 0-1% on my desktop, with no anti-virus, or any other program running except This browser (mozilla)
I am using 3 Gigabytes of RAM.
 

A:Solved: Having RAM issues with new AMD Phenom II X4 and Gigabyte MA790X-UD4P

https://forums.techguy.org/threads/solved-having-ram-issues-with-new-amd-phenom-ii-x4-and-gigabyte-ma790x-ud4p.845754/
Relevancy 53.32%

can i upgrade my p6 2310 to a gigabyte r7 360. im planning to upgrade the power supply to a 700 watt

A:can i upgrade my p6 2310 to a gigabyte r7 360

The first question should be need, then compared to why the R7 360.  Is there a specific need (game-wise) ? Second would be the over power PSU.   Your original PSU is 300W, the recomended for the card is 500W.  The card draws only 100W.  Have  you actually looked inside.  Would this 700W PSU physically fit?  The Standard ATX is 5.5" depth into the case. A corsair CX600 would be an exact fit.

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/can-i-upgrade-my-p6-2310-to-a-gigabyte-r7-360/td-p/5754330
Relevancy 52.89%

Hi guys.

1st post go easy please....

I want to upgrade my dated & laggy CPU. Intel P4 3ghz (531)

I have been looking at the Q6600, Is that the best one my board can take for around the £100 mark?

I am running Windows 7 x32 with 4gb of ram (3gb showing) my fault for selecting x32! i am after a boost in performance, I use the PC for graphic design web build, so as you can imagine i use some hungry programmes.

What do you guys suggest...?

Brad.
 

A:Gigabyte EG41MF-US2H CPU upgrade?

The Gigabyte G41 board you've listed supports almost any LGA775 socket CPU. So therefore, it's a mystery, (at least to me), why you've selected such a relic as the Q6600 for the upgrade. You'd probably do much better with a more modern quad.
Oh well, here's the CPU support page: http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=3469 Think on it for a bit..
 

http://www.techspot.com/community/topics/gigabyte-eg41mf-us2h-cpu-upgrade.158013/
Relevancy 52.89%

I'd like to upgrade CPU on Gigabyte GA-945GCM-S2L motherboard to E8500, but it's written on official website that it's only supported by overclocking "(F6(by Overclocking)". What's that supposed to mean? I know in general what overclocking is, but I can't imagine what would I need to do in order to successfully boot up system after upgrade. Could you give me advise, maybe a tutorial on that one?
It's also very weird for Core? 2 Quad support. Judging by gigabyte.com support it's supposed to be supported, but on unofficial ones, I've seen that it isn't. Which one really applies?

http://www.eightforums.com/drivers-hardware/52887-gigabyte-ga-945gcm-s2l-upgrade-cpu-e8500.html
Relevancy 52.89%

I'd like to upgrade CPU on Gigabyte GA-945GCM-S2L motherboard to E8500, but it's written on official website that it's only supported by overclocking "(F6(by Overclocking)". What's that supposed to mean? I know in general what overclocking is, but I can't imagine what would I need to do in order to successfully boot up system after upgrade. Could you give me advise, maybe a tutorial on that one?

It's also very weird for Core™ 2 Quad support. Judging by gigabyte.com support it's supposed to be supported, but on unofficial ones, I've seen that it isn't. Which one really applies?
 

Relevancy 52.03%

My computer is low spec and over years old I only have GB RAM which is beginning to become a problem on Windows so I was thinking of upgrading although it seems my motherboard only has slots so would mean Gigabyte upgrade) Motherboard (Memory GA-8TRC410M-NF I need to purchase x GB or x GB but is it really worth it to spend the money I have always put off and delayed upgrading my PC due to motherboard processor and ram etc needing to be compatible so is easier to upgrade as a whole but I'm not ready yet and looking to squeeze Gigabyte Motherboard GA-8TRC410M-NF (Memory upgrade) possibly another years out of my current system Where is a cheap place to buy my RAM I was only looking to spend like or else it seems like a waste especially as my processor is intel pentium Ghz should I buy used RAM or buy it new Thanks I forgot to add I'm running Windows off Corsair Force GB SSD My physical memory is usually always up around I haven't fully optimized startup programs yet and I don't game mostly just web browse and use pc as entertainment media center occasionally like to edit images render create videos burn cds convert formats some things Gigabyte Motherboard GA-8TRC410M-NF (Memory upgrade) that are little processor intense so not sure ram would benefit in those scenario ideally I think an extra GB but I'm guessing it'll be more cost effective and worth it to go x GB for GB but will my system only register show GB because I'm on bit windows

A:Gigabyte Motherboard GA-8TRC410M-NF (Memory upgrade)

I really think upgrading your memory now would be a waste of money. You would be better off waiting till you can afford a new motherboard, CPU, etc. & then get the amount of RAM that you would like then.

Your current RAM socket on the motherboard has probably been superseded, so getting new RAM now would mean it would not suit a new motherboard later, so whatever you would spend now would be wasted.

http://www.sevenforums.com/hardware-devices/312293-gigabyte-motherboard-ga-8trc410m-nf-memory-upgrade.html
Relevancy 52.03%

Recently, I installed two new sticks of RAM and a new hard drive into my computer. After doing this, both my on board network card and PCIe network card do NOT identify when there is a working cable plugged into them. I cannot, thusly, connect to the internet in a wired way.

I'm at a complete loss, here. I'm running BIOS version F10c, and the NICs worked under this version up until this most recent install.

Where should I start to fix this issue?

Thanks in advance.
 

A:Solved: GA-MA790X-UD4P LAN Issue

You'll need to install LAN Card drivers..What is your LAN Card model or Motherboard model? (PC make and model) If it's an integrated card, you'll need to install the Motherboard Drivers.What is showing in Device Manager for your NIC?
 

https://forums.techguy.org/threads/solved-ga-ma790x-ud4p-lan-issue.1025885/
Relevancy 51.17%

Hello everyone, I recently installed my new GA-MA790X-UD4P motherboard and reformated. Everything has been smooth sailing besides the audio. On gigabytes website they have 2 audio drivers for my motherboard.

I downloaded the first driver which is the "Microsoft UAA (Universal Audio Architecture) Bus driver (Full Multi-language version )" and installed that. Restarted my computer and no audio icon poped up, and it says no sound and audio device in control panel.

So I downloaded the second driver "Realtek Function driver for Realtek Azalia audio chip (Including Microsoft UAA Driver in English edition)" Installed that and restarted. Still the same thing, no audio icon pops up and says no audio device in control panel, What do you recommend I do to fix this problem?
 

Relevancy 51.17%

I am thinking about upgrading my computer by purchasing higher RAM, a higher capacity Hard Drive, Etc, but I wanted to ask should I upgrade my computer with the Motherboard that I currently have or should I purchase a new motherboard and then upgrade that one? I am worried that if I purchase RAM now, It wont be compatible with another motherboard if I need another type.

Please help!
 

A:Solved: Should I continue to upgrade or should I replace my Gigabyte GA-8IK1100 Motherboard?

https://forums.techguy.org/threads/solved-should-i-continue-to-upgrade-or-should-i-replace-my-gigabyte-ga-8ik1100-motherboard.563813/
Relevancy 47.73%

I have a Western Digital 1 TB USB 2.0 that I have connected to a computer that has Gigabyte connection to my NAS which can handle Gigabyte speeds.

I am only getting 30.1MB/s.

Is there any settings I can do to windows so that it can send faster?

I have Windows 7 Ultimate 64-Bit.

A:USB2.0 HD Transfer over Gigabyte Network to Gigabyte NAS

You're doing well. Large file transfers on my system via USB 2.0 are only about 24 MB/s. I did notice when I plugged my Seagate USB 2.0 external into my SIIG USB 3.0 card, sequential reads and writes were about 15% improved. I just plugged the USB 2.0 drive in while I was waiting for USB 3.0 docking stations.

If you have a free PCIExpress slot you may get some improvement plugging the USB 2.0 into the USB 3.0 card. But using SIIG USB 3.0 docks and WD caviar black internal drives I find the drives run at full speed. Only thing is now the price bubble is preventing me from increasing my stock of internal drives.

http://www.sevenforums.com/network-sharing/196922-usb2-0-hd-transfer-over-gigabyte-network-gigabyte-nas.html
Relevancy 47.73%

OK So what would benefit me more Two GIGABYTE GV-R OC- GD Radeon R GB -Bit GDDR Crossfired together OR one GIGABYTE GV-N OC- GD GeForce GTX GB -bit GDDR It's my first build and have been running one R OC GPU and I get - fps on ultra The R card is bit GB DDR and the nvidia is bit GB DDR has higher MHz as well Which setup would yield a better image and higher fps --Side Question If I would Crossfire there would be PCI slot between the two cards on default cooling Liquid cooling is only on the CPU with the H i Right now my current GPU doesn't go over F C would the second GPU that Gigabyte Gigabyte R9 Single OR Crossfire N770OC 270 OC x1 close to the other cause a drastic increase in temps Also the second GPU would be rather close to my PSU but the PSU is upside down with its fan on the outside of the case so no additional heat from the PSU

http://www.eightforums.com/graphic-cards/45651-gigabyte-r9-270-oc-crossfire-x1-gigabyte-n770oc-single.html
Relevancy 47.73%

Hey guys Help me out in jumping down on a final decision Now let me give you some info and specs about my Rig - i k - ASRock Fatal ty H Performance CrossFireX Ready SLI not supported - GB G Skill will upgrade later - Cooler Master GX w - Samsung LCD Monitor x Native Here are OC Gigabyte GTX 7870 Gigabyte vs GeForce OC HD Radeon 760 cards I would like you guys to choose from and why GIGABYTE - Graphics Card - Gigabyte Radeon HD 7870 OC vs Gigabyte GeForce GTX 760 OC ATI - PCI Express Solution - Radeon HD series - GV-R OC- GD GIGABYTE - Graphics Card - NVIDIA - PCI Express Solution - GeForce Series - GV-N OC- GD rev Also I know the GTX is newer and has PhysX Support but it's costing more than the HD also my motherboard does not have SLI Support but it's CrossFireX Ready and I wanna play all new games at maxed out settings if possible and I have LCD that has a x Native Res There are chances that I might get p Monitor in Q or Q next year The is available for and GTX for in my currency and country These are the least prices I can Gigabyte Radeon HD 7870 OC vs Gigabyte GeForce GTX 760 OC found and Gigabyte Radeon HD 7870 OC vs Gigabyte GeForce GTX 760 OC now you have all the info please help me choose which one would be good for me in terms of Price Performance and most of all Power Consumption as we have frequent black outs and my UPS has little backup time to turn things off especially when gaming while system is running at PEAK

A:Gigabyte Radeon HD 7870 OC vs Gigabyte GeForce GTX 760 OC

Personally I'd to for the 760.

http://www.sevenforums.com/graphic-cards/305400-gigabyte-radeon-hd-7870-oc-vs-gigabyte-geforce-gtx-760-oc.html
Relevancy 33.97%

Every time I order a new hard disc or SD-card or whatever I get When be 1GB one gigabyte? will a bit angry and a bit disappointed at When will 1GB be one gigabyte? how regulators and the industry mismanage consumer trust in what e g quot GB quot stands for Why can t they agree on that GB on the package should show as GB of available space in a device xGB available space as shown in my phone is close to a loss of space and the larger storage devices get TB harddisc for instance the bigger the gap will be I am fully aware of the discussion around When will 1GB be one gigabyte? the quot gibibyte quot and all that raindancing But honestly if I were to sell my slowish Volvo with horsepower and say in the ad that it has quot harsepower quot coming up with a way to calculate that how legit will that be So I wonder if you people know about any consumer group out there that needs a fistful of dollars in support every now and then in order to fix this bs nbsp

A:When will 1GB be one gigabyte?

I believe that's down to the formatted usable space, not the hard disks capacity.
 

http://www.techspot.com/community/topics/when-will-1gb-be-one-gigabyte.178784/
Relevancy 33.97%

Gigabyte GA K N Ultra NVIDIA nForce RAID class Gigabyte DIY controller This is an early DIY Gigabyte Gig board socket with sata connectors for raid configuration Silicon NVIDIA I have built this DIY system w sata drives mbs each using W XP I tried to configure it with the nvidia raid connectors on the board and the software to copy to floppy and configure during OS insallation but during the final boot sequence in OS istallation it would just stop no error screen to get a clue from I reconfigured it to run under Silicon Image SiI SoftRaid controller and the system works just fine mbs each drive configured for raid I would like to have full use of this boards capabilities to be able to connect drives to the nvidia ports but device manager is throwing up a flag that the nvidia raid controller is not configured properly there is a quot New Software Found quot message every time the system boots and auto configuration thru Windows doesn t fix anything I have tried downloading drivers from the Gigabyte site and updating the driver through Windows but nothing seems to work Plussss I cannot find the exact model number match on the Gigabyte website Any clues on how to address this yellow flag problem nbsp

Relevancy 33.97%

I have a gigabyte mobo GA-7dx ver. 3.0f which desn't match the layout in the gigabyte website manual and i need the front panel plug pin outs. the connector is on the lower right side and vertical compared to the bottom side horizontal position in the manual. there are two nine pinrows with a gap in the inside row. probably an oem board. any help would be appreciaed.
[email protected]
 

A:gigabyte GA-7dx

Try the Gigabyte forum at amdmb.com. For gigabyte specific information they can't be beat!
 

http://www.techspot.com/community/topics/gigabyte-ga-7dx.4672/
Relevancy 33.97%

I recently purchased a Gigabyte GA-7n400pro2. my prev motherboard was a MSI old one and it ran about 29 - 39degrees. when i play games it raise to 40 - 45 and i was happy. but when i goto replace the motherboard with this new gigabyte it let alone sits at 65 degrees without me doing anything. if i play games it goes over 70 and reboots my computer. this is rediculas. any clues like gigabyte false temp readings , bios updates? switches on motherboard .....
 

A:gg gigabyte.

cough

i just read that gigabyte shows 15c MORE then the normal. but when i touch the heatsink it soo hot.

the reason being is that i want to overclock my cpu but with 65 - 75c its risky.

also is there any programs that read temperatures on gigabyte motherboards

- Wach your language on these forums
Didou
 

http://www.techspot.com/community/topics/gg-gigabyte.16971/
Relevancy 33.97%

I ve found some good deals on some Gigabyte MicroATX boards at Dumpinggoods com but I don t what the difference is between the boards I m looking at or which onw is best They are the GA- VKML GA- VKMLP GA- VKMLS GA- amp KMLE They all have similar features I just don t know how to read the fine print I guess Does anyone hae a opinion Here s some links http best The me? Gigabyte 4 www giga-byte com MotherBoard Products Products GA- VKMLE htm http www giga-byte com MotherBoard Products Products GA- VKML htm http www giga-byte com MotherBoard Products Products GA- The best Gigabyte 4 me? VKMP htm http www giga-byte com MotherBoard Products Products GA- VKMLS htm ect I also have my eye on a ASUS A V X-MX http cgi ebay com ws eBayISAPI dl amp category amp sspagename STRK MEBWA IT amp rd Would this be the The best Gigabyte 4 me? best bet this particular sale has ended but the seller said I could contact him afterwords if I want one TIA nbsp

Relevancy 33.97%

Is cat 5e good enough for a 1,000 Mbps network or do I need cat 6 to get a full 1 Gbps of data transfer? The total run is about 20 feet. Also whats the limit of cat 5e?
 

Relevancy 33.97%

Hello hjt log-gigabyte Do you guys see anything suspicious i already removed some on the junk thanksLogfile of HijackThis v Scan saved at AM on Platform hjt log-gigabyte Windows XP SP WinNT MSIE Internet Explorer v SP Running processes C WINDOWS system csrss exeC WINDOWS system winlogon exeC WINDOWS system services exeC WINDOWS hjt log-gigabyte system lsass exeC WINDOWS system svchost exeC WINDOWS system svchost exeC WINDOWS System svchost exeC WINDOWS System svchost exeC WINDOWS System svchost exeC WINDOWS system spoolsv exeC Program Files Common Files Symantec Shared ccEvtMgr exeC Program Files Norton SystemWorks Norton AntiVirus navapsvc exeC Program Files Norton SystemWorks Norton Utilities NPROTECT EXEC WINDOWS System nvsvc exeC PROGRA COMMON Stardock SDMCP exeC PROGRA NORTON SPEEDD nopdb exeC Program Files Stardock Object Desktop WindowBlinds wbload exeC WINDOWS System alg exeC WINDOWS Explorer EXEC Program Files Gigabyte Gigabyte Windows Utility Manager ET et Tray exeC WINDOWS System spool drivers w x hpztsb exeC Program Files Google Gmail Notifier G - gnotify exeC Program Files Common Files Symantec Shared ccApp exeC WINDOWS SOUNDMAN EXEC Program Files Winamp winampa exeC Documents and Settings Misha Desktop Stuff Cpuidle exeC Program Files BroadJump Client Foundation CFD exeC Program Files Visual Networks Visual IP InSight SBC IPClient exeC Program Files Visual Networks Visual IP InSight SBC IPMon exeC Program Files Java j re bin jusched exeC Program Files Webroot Washer wwDisp exeC Program Files Webroot Spy Sweeper SpySweeper exeC Program Files BitTornado btdownloadgui exeC Program Files BitTornado btdownloadgui exeC Program Files BitTornado btdownloadgui exeC Program Files Stardock Object Desktop DesktopX DesktopX exeC WINDOWS system drwtsn exeC WINDOWS system drwtsn exeC Program Files Trillian trillian exeC WINDOWS system drwtsn exeC WINDOWS system csrss exeC WINDOWS system winlogon exeC PROGRA COMMON Stardock SDMCP exeC Program Files Stardock Object Desktop WindowBlinds wbload exeC WINDOWS Explorer EXEC Program Files Gigabyte Gigabyte Windows Utility Manager ET et Tray exeC WINDOWS system RUNDLL EXEC WINDOWS System spool drivers w x hpztsb exeC Program Files Google Gmail Notifier G - gnotify exeC Program Files Common Files Symantec Shared ccApp exeC WINDOWS SOUNDMAN EXEC Program Files Winamp winampa exeC Documents and Settings Misha Desktop Stuff Cpuidle exeC Program Files Java j re bin jusched exeC Program Files Messenger msmsgs exeC Program Files Webroot Spy Sweeper SpySweeper exeC Program Files AIM aim exeC WINDOWS system sol exeC Program Files SlimBrowser sbrowser exeC Program Files Winamp winamp exeC WINDOWS system drwtsn exeC Program Files Windows ServeAd WinServAd exeC Program Files Windows ServeAd WinServSuit exeC Program Files Messenger msmsgs exeC Program Files hjt HijackThis exeR - HKCU Software Microsoft Internet Explorer Main Default Search URL C WINDOWS h htmlR - HKCU Software Microsoft Internet Explorer Main SearchAssistant C WINDOWS s htmlR - HKCU Software Microsoft Internet Explorer Main Start Page http casemodgod comR - HKLM Software Microsoft Internet Explorer Main Start Page http casemodgod comR - HKCU Software Microsoft Internet Explorer Main Start Page bak http win-eto com hp htm id R - URLSearchHook no name - A FAF - E- cf- - F A D - no file O - BHO IEPlugin Class - CF C CF - B - D -ABED- C - C Documents and Settings Misha Desktop Stuff systemop Advanced System Optimizer IEHelper dllO - HKLM Run EasyTuneIV C Program Files Gigabyte Gigabyte Windows Utility Manager ET et Tray exeO - HKLM Run NeroFilterCheck C WINDOWS system NeroCheck exeO - HKLM Run NvCplDaemon RUNDLL EXE C WINDOWS System NvCpl dll NvStartupO - HKLM Run NvMediaCenter RUNDLL EXE C WINDOWS System NvMcTray dll NvTaskbarInitO - HKLM Run HPDJ Taskbar Utility C WINDOWS System spool drivers w x hpztsb exeO - HKLM Run e - f c- e -a ec-b a b c C Program Files Google Gmail Notifier G - gnotify exeO - HKLM Run ccApp C Program Files Commo... Read more

A:hjt log-gigabyte

Uninstall windupdates * Click Start -> Control Panel -> Add/Remove Programs * Scroll to Wind Updates and click RemoveNext, make sure your PC is configured to show hidden filesOpen Windows Explorer & Go to Tools > Folder Options. Click on the View tab and make sure that "Show hidden files and folders" is checked. Also uncheck "Hide protected operating system files" and untick "hide extensions for known file types" . Now click "Apply to all folders"Click "Apply" then "OK"Reboot to Safe ModeHow to start the computer in Safe mode http://service1.symantec.com/SUPPORT/tsgen...src=sec_doc_namScan with Hijack This and put checks next to all the following, then click "Fix Checked"R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = C:\WINDOWS\_h.htmlR1 - HKCU\Software\Microsoft\Internet Explorer\Main,SearchAssistant = C:\WINDOWS\_s.htmlR1 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page_bak = http://win-eto.com/hp.htm?id=9R3 - URLSearchHook: (no name) - _{00A6FAF6-072E-44cf-8957-5838F569A31D} - (no file)O4 - HKLM\..\Run: [Windows ServeAd] C:\Program Files\Windows ServeAd\WinServAd.exeO4 - Global Startup: winlogin.exeO9 - Extra button: Corel Network monitor worker - {2613BDBF-ABB8-4FFF-9C6F-045AD431AA8F} - C:\WINDOWS\System32\iegfxfrw.dllO9 - Extra 'Tools' menuitem: Corel Network monitor worker - {2613BDBF-ABB8-4FFF-9C6F-045AD431AA8F} - C:\WINDOWS\System32\iegfxfrw.dllO13 - DefaultPrefix:O13 - WWW Prefix:O15 - Trusted Zone: *.greg-search.comO15 - Trusted IP range: 206.161.125.149 (HKLM)O16 - DPF: {0D6709DD-4ED8-40CA-B459-2757AEEF7BEE} (Dldrv2 Control) - http://210.80.76.119/object/Dldrv.ocxO16 - DPF: {15AD4789-CDB4-47E1-A9DA-992EE8E6BAD6} - http://static.windupdates.com/cab/ClickYes.../bridge-c33.cabO16 - DPF: {1D4DB7D2-6EC9-47A3-BD87-1E41684E07BB} - http://ak.imgfarm.com/images/nocache/funwe...etup1.0.0.8.cabO20 - AppInit_DLLs: gx1jhizs224w.dll,wbsys.dllDelete the following files if found:C:\WINDOWS\_h.htmlC:\WINDOWS\_s.htmlC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\System32\iegfxfrw.dllgx1jhizs224w.dllReboot and do an online scan at the following site. Let it remove any infected files found. Trend Micro (PC-cillin) - Free on-line Scanhttp://housecall.antivirus.comScan again with HijackThis and post a fresh log please.

http://www.bleepingcomputer.com/forums/t/7076/hjt-log-gigabyte/
Relevancy 33.97%

i think gigabyte is best motherboard for pc i love giga byte

A:gigabyte

good for you, now have a bone and chew it

http://www.sevenforums.com/hardware-devices/97763-gigabyte.html
Relevancy 33.97%

I have a DVD that came with my computer labeled Gigabyte 7-series utility DVD, easy energy saver. What is this used for?

A:what is a gigabyte DVD used for?

Welcome to TSF
Looks like drivers for the system

http://e-techsiliconvalley.com/store...oducts_id=5271

http://www.techsupportforum.com/forums/f10/what-is-a-gigabyte-dvd-used-for-493649.html
Relevancy 33.97%

Well finally had enough parts to get my new beast going the other day Everything except the GTX but I had an old not doing anything so will use that till the budget allows Put the GB of memory in and the x TB hard drives plugged New dud a X79-UP4 Gigabyte the power cable in and pushed the button Wow what a letdown The cooling fans gave a kick the New Gigabyte X79-UP4 a dud corsair water pump ring light came on for an instant and the memory lights came on and stayed on Could not get it past that point No POST nothing So stripped out the video card memory and unplugged the drives If it was any of these New Gigabyte X79-UP4 a dud it should at least start the fans and POST Still no go That left CPU power supply or MB Took out the power supply and put in in my currently working PC and it fired up no problem so not power supply CPU or MB Emailed the place I got it from and they RMA'ed the MB back and said they had been having a few issues lately with Gigabyte MB's Were going to test it themselves and send me a replacement but I decided to spend some extra and get a Asus P X Deluxe instead more days of waiting then all go hopefully

A:New Gigabyte X79-UP4 a dud

I bought a Gigabyte board years ago and it was a dud right out of the box. I haven't touched another one since. I also replaced it with an ASUS board. My two desktops and my laptop are ASUS.

http://www.eightforums.com/drivers-hardware/47316-new-gigabyte-x79-up4-dud.html
Relevancy 33.97%

i just purchased a Gigabyte GA-7VA with an Athlon XP1800.

I have 4 drives in the sytem, and XP only sees 2 of them. the system is a dual boot, and Red Hat Linux 9 sees them all, which tells me that the BIOS sees them correctly as well.

has anyone seen behavior like this before, or have any ideas on how to force xp to see the other drives?

thnx
 

https://forums.techguy.org/threads/xp-pro-with-gigabyte-ga-7va.131505/
Relevancy 33.97%

Hello guys,

Well my a little over a year old motherboard has developed a problem in which the SATA controller will stop functioning suddenly, freezing my computer and then upon rebooting it, SATA drives will not be detected.

Is there ANYTHING I can do to try to repair it? I've scanned the motherboard and it doesn't seem to have any bulging capacitors or burnt modules that can be seen with the naked eye.

Anything specific I should be looking at?

Thanks in advance!

Refer to this thread for all symptoms: http://forums.techguy.org/hardware/658425-system-locks-up-then-hdd.html

EDIT: I just noticed that I didn't finish the topic name, I just put in the model number but did not specify what's the problem!

Can a moderator please change the name to: Gigabyte GA-K8N-Sli Motherboard SATA function: Dead

Thanks
 

A:Gigabyte GA-K8N-Sli

Well guess what. Just like in the symptoms described, I am currently posting from the faulty computer, that has been running straight for 15 hours without a hitch.

What could be the problem? A small short around there?
 

https://forums.techguy.org/threads/gigabyte-ga-k8n-sli.683065/
Relevancy 33.97%

ok im going to make this shorts and sweet. gigabyte did not support my processors for a while then.... when the bios update came "last week" they did not post a link for the download so i can flash bios with this. So im on hold with tech support now... kinda funny but they guys like dont worry im going to send you the file to your email so about an hour later i get it. its an eml file i have no idea how to take it off gmail... help please discounts for everybody!
 

A:Die Gigabyte Die!!!

http://support.microsoft.com/kb/312355

It would be logical to assume that running gmail with the /reg option would also work.
 

http://www.techspot.com/community/topics/die-gigabyte-die.82153/
Relevancy 33.97%

Hello, I have a gigabyte ga-k8n pro sli mb and a samsung sp2504c sata hd that I am trying to install latest win7 beta on. I get to the point where I choose to do a clean install and I see my hd in the list but it asks for drivers for hd or mb. I am thinking it is for the mb. It gives me the option of browsing for the driver. I can install xp pro on this same set-up without any trouble. Any help would be great. Thanks.

A:Gigabyte GA-K8N Pro Sli

dlettau, welcome to the forums.

If you have it set to SATA in the bios, what it is most likely asking ofr is the SATA drivers. Start here,

View forum - nForce Drivers • nForcersHQ.com

and see which set is working best with the NF4 chipset and download it. Once downloaded extract it. Place the extracted files on a separate hard drive/partition or USB key (if you have one, then during the Windows install point it to the folder that contains the SATA/RAID INF.

http://www.sevenforums.com/drivers/26411-gigabyte-ga-k8n-pro-sli.html
Relevancy 33.97%

which of the two should i go for??
Gigabyte GA-EX58 UD3r or MSI X58 Pro-E
please support u r views with reasons
make it easy for me to decide..

and is G skill 3 gb F3-12800CL9T 3gbBNQ good enough?

thnakx in advance..
 

A:Gigabyte or MSI

Hi vinaypro,
Both of them are excellent boards. the tipping factor may be that Gigabyte has a reputation for having the strictest manufacturing standards in the industry.They also tend to have somewhat better heat dissipation due to more copper being used in the PCB. The Gigabyte GA-EX58 UD3r is a better overclocker (if your into that) and has slightly less power consumption. other than those two areas they run a dead heat in performance. you will be pleased with either of them ,however, being at the same price point i would recommend the Gigabyte.
 

http://www.techspot.com/community/topics/gigabyte-or-msi.136396/
Relevancy 33.97%

i am building a new pc and i m very confused about this 2 motherboards.
Gigabyte GA-G1975X
MSI 975X Platinum
these 2 are only available in the market over here so which one would be the best in operating games? i m using a msi 7600gt graphic card..... please let me know in detail.
 

A:Gigabyte or MSI?

I've seen MSI mobos being very easy to install and I'm yet to see one fail, so I would say MSI.
Plus it's the same brand as ur graphic card!
 

http://www.techspot.com/community/topics/gigabyte-or-msi.59346/
Relevancy 33.54%

Does this support core2duo? because I want to change my mobo to this one. my proce is core2duo atm. Thanks
 

A:Gigabyte Zacate E-350

Pls rephrase that question and if I actualy managed to get the hang of this topic the amd zacate e-350 has a built in cpu which cannot be changed

the zacate e-350 wont work for Core2Duos
 

http://www.techspot.com/community/topics/gigabyte-zacate-e-350.194919/
Relevancy 33.54%

A client's PC won't correctly assign the IRQ for its PCI NIC. The MB is an A7XE. During post it says the PCI NIC is assigned to IRQ 10. But in Win2000 DM it says IRQ11 along with all the onboard devices, USB and sound??? Just upgraded the BIOS, no change. Tried a different brand NIC, same thing. The system seems to work fine most of the time, but every few days the network connection drops and must reboot. The OS reports NO Conficts!!
Maybe its just me...

Wayne
 

A:Gigabyte IRQ woes

Try putting the NIC in another slot, quite often it gets another IRQ assigned by just doing that.
 

http://www.techspot.com/community/topics/gigabyte-irq-woes.10767/
Relevancy 33.54%

I was wondering if someone could help me I have a Gigabyte KT MB and and AMD XP processer and Megs of RAM Gigabyte KT400 It has been working fine for about month at then Gigabyte KT400 i realized that i forgot to set the dipswith to when i did that it was working great for about months then today while i was playing a game i locked up so i tried the three fingure wammy ctrl alt del no response so i decied to just shut it off I waited about min and booted it back up i got a post beep and it started loading windows when i got a blue sceen So i did what it said and rebooted got the post beep again but i would not go past the ram check so i shut Gigabyte KT400 it off again Booted up and all i got on the screen was the American Treands Logo and it froze again i shut it down and reseated everything turned it back on same thing at this point i got so fed up with it i just shut it down and left it alone for about hours Gigabyte KT400 then i turned it back i got into safemode and it locked up so i shut it down again truned it back on same thing just the logo I was thinking it s the RAM but im not sure if anyone has had this or a simmiler prob pls let me know what the solution was Thanks in advance Salari nbsp

A:Gigabyte KT400

Yes I would suggest using only 1 stick at a time until you find the culprit. If you have only 1 sitck, then see if you can't put in a spare or buy another to test it out. As Rick said the only way to be for sure is to replace it or take 1 out at a time.
 

http://www.techspot.com/community/topics/gigabyte-kt400.7952/
Relevancy 33.54%

It finally came today. I'm feeling a little unwell so I'll wait til I'm better before I start overclocking and benching.

A:Gigabyte 6950

Nice.

Might go grab the 10.12, or rather the 10.12a one before benching instead of 10.11.

AMD Catalyst driver 10.12a Hotfix Feature:
AMD Catalyst driver support for systems running Windows? 7 / Windows Vista? with an AMD Radeon? HD 69xx series graphics card installed

AMD Catalyst

http://www.sevenforums.com/graphic-cards/135624-gigabyte-6950-a.html
Relevancy 33.54%

So i just got myself a GigaByte GA-8IK1100 motherboard, but my PC3200 RAM doesn't come in until late. Can I put my old PC2100 RAM in there with no harm?


Motherboard Memory Info:
Memory
Type: Dual Channel DDR 400 / 333 ECC support
Max capacity: 4 GB
DIMM slots: 6
 

A:GigaByte GA-8IK1100 & RAM??

There will be no harm putting a PC2100, it will just run at its default speed 266MHz. Its just like placing a 4x AGP card into your mobo when 8X is suppported.
 

http://www.techspot.com/community/topics/gigabyte-ga-8ik1100-ram.6459/
Relevancy 33.54%

Before installing my OS i could not get video on my screen. After taking the card out I could load bios and the screen was fine. Now after loading up Windows 7, I plug in my GTX 670 and there is no video whatsoever. Is there something I need to do in BIOS? My motherboard is a ga-z77x-ud5h, with 16 GB ram and i7 3770k. Only running 1 monitor. Should I try to plug the monitor into the card itself?

A:Gigabyte GTX 670 problem

[QUOTE=Mikedym;2260082]Before installing my OS i could not get video on my screen. After taking the card out I could load bios and the screen was fine. Now after loading up Windows 7, I plug in my GTX 670 and there is no video whatsoever. Is there something I need to do in BIOS? My motherboard is a ga-z77x-ud5h, with 16 GB ram and i7 3770k. Only running 1 monitor. Should I try to plug the monitor into the card itself?[/QUOTE]
Yes. Motherboards are starting to come more and more with auto detecting graphic output settings.

http://www.sevenforums.com/graphic-cards/274637-gigabyte-gtx-670-problem.html
Relevancy 33.54%

It seems pretty standard but reasonably good value for money. Good for rookie pc lovers like myself. What do you think? good or bad?
 

A:Gigabyte 8sg-800 good or bad?

it's just a component

it depends on what you plan to do.....the product line (Gigabyte) itself is outstanding, and, if that's the direction you're going, you've obviously researched it, go for it
ps.........since you're a rookie, look into the cost and attribute differential between intel and amd systems to compare
 

http://www.techspot.com/community/topics/gigabyte-8sg-800-good-or-bad.7028/
Relevancy 33.54%

HI

I am planning on upgrading (argh not another upgrade post!) to a Gigabyte GA-7VAX but i have herd off some sites that it freezes and is unstable i just wanted to know if anyone who owns this board has encountered any problems like this or anything else for that matter thx :grinthumb
 

A:Gigabyte GA-7VAX

Yes I do, actually I have the VAXP version and I haven't had any trouble with it except one glitch that I haven't worked out yet. Other wise, it is a great board.
 

http://www.techspot.com/community/topics/gigabyte-ga-7vax.5896/
Relevancy 33.54%

Does anyone know if this board supports large HDD. 320 GB, 500 GB etc.? Thanks fish4specs
 

A:Gigabyte GA-K8U-939 HDD support

Update to the latest BIOS and it definitely will support hard disks of any capacity
 

http://www.techspot.com/community/topics/gigabyte-ga-k8u-939-hdd-support.147710/
Relevancy 33.54%

Using a Zyzel DSL modem/router connected to a switch to share the connection with 4 PC's. .

If I put in a 1000 Mbps Switch, will the pc's attached to the switch ( all have gigabyte NIC's ) move data between themselves at 1000 Mbps or will the modem force the entire network back to 100?

Thanks . .
 

A:Gigabyte Switch . .

The traffic among computers connected to the switch will stay within the computers, cables and switch; will not go to the modem/router.

I assume, but do not know for a fact, that the switch ports connected to Gigabyte adapters will operate at that bandwidth, and only those connected to 100mbps will operate at the lesser rate.
 

https://forums.techguy.org/threads/gigabyte-switch.495843/
Relevancy 33.54%

Gigabyte's QuickBoot provides for bootup QuickBoot Gigabyte ? SSD + = times of seconds or less which sounds awesome but before Gigabyte QuickBoot + SSD = ? I enable it I'm curious if there is any downside especially with my OS residing on an SSD Intel X -M quot Smart QuickBoot There is nothing more frustrating than having to wait ages for your PC to boot That is why GIGABYTE developed their Smart Quickboot tool Smart Quickboot speeds up the system boot-up process and shortens the waiting time for entering the operating system It manages to do this in two ways The first is with a BIOS QuickBoot Every time you boot up your PC your BIOS checks your hardware to make sure everything is working properly This can take some time as your system checks the memory hard drives etc By enabling Smart QuickBoot your BIOS will only run through the hardware scan once If all your hardware checked out ok the next time you boot your PC will only scan the very critical components This allows you to save up to - seconds on the BIOS boot time alone The second component of Smart QuickBoot is OS QuickBoot This utility allows you to power down your PC into Suspend Mode S and Hibernate Mode S at the same time Putting your PC into S and S modes is like putting your PC to sleep allowing you to maintain your data while at the same time saving energy When you power your PC back on Smart QuickBoot will resume from Suspend Mode in a matter of a few seconds allowing you to avoid having to reboot the OS The great thing about OS QuickBoost is that your data is stored in both the memory with S state and is also stored in your hard drive for the even deeper S state This means that even if your PC is unplugged or you lose power when you next boot up your PC it will resume from S automatically using the data that was stored in your hard drive Source GIGABYTE Smart webpage Two questions Is removing hardware scan a dangerous thing I've read that it isn't a good idea to use hibernate suspense with SSDs Any other thoughts appreciated Thanks

A:Gigabyte QuickBoot + SSD = ?

Hi Sam,

There is a bit of a mixed opinion about some of these Gigabyte "utilities". I too have a Gigabyte motherboard, but steer well clear of QuickBoost, Smart6, CloudOC and the like. An SSD by itself already gives you a very significant advantage and quicker boot anyway - I just wouldn't take the risk.

I have a OCZ Vertex 2 SSD and use sleep regularly, and haven't yet noticed any downside/ill effects.

Regards,
Golden

http://www.sevenforums.com/performance-maintenance/183532-gigabyte-quickboot-ssd.html
Relevancy 33.54%

I had a problem with a Gigbyte board GA- IK ver Wrote Gigabyte twice about it finally getting a response on the second e-mail Apparently if you are using a single SATA drive on this motherboard you have to set it up as though you are Gigabyte answers using a RAID Gigabyte answers configuration When the OS is Gigabyte answers loading intially you have to F- during boot up and load ICH R RAID driver Gigabyte answers This apparently activates the SATA ports The driver is available on the Gigabyte website but they give no supporting documentation to expalin what it is for The Gigabyte board documentation and the Gigabyte website make no mention about this issue The board is a great board seems to be very stable and fast Sad that they cannot bring this issue to light or give better support for their products I do have to day that at least I got a response from them It has not been that way with other motherboard producers I hope this might help others who decide to buy this board and use the new drive technology that I did nbsp

A:Gigabyte answers

windows xp is a nice OS, and supports just about all the hardware out there, the problem is xp cannot cache every driver out there, and during setup, they do a good job of loading common RAID drivers, but xp setup cant have them all, especially for newer boards.
 

http://www.techspot.com/community/topics/gigabyte-answers.10951/
Relevancy 33.54%

Hi, need an information regarding about the graphic mention in the link below as i am thinking to purchase it.

Right now i am using Asus P5G41T-M LX, motherboard and i want to know would this graphic card will work on my motherboard. I am using the latest BIOS available for the mentioned mobo. Appreciate the help thanks to all.

GIGABYTE - Graphics Card - AMD - PCI Express Solution - Radeon? R7 200 series - GV-R724OC-2GI (rev. 1.0)

http://www.sevenforums.com/graphic-cards/390778-gigabyte-gv-r724oc-2gi.html
Relevancy 33.54%

I have a Xigmatek Tauro 500 Walts power supply need HELP can the Gigabyte Nvidia GTX 770 2GB run on this power supply the motherboard is MSI H81-ME35 Processer is 4TH Gen Intel Core i5 4440 3.10Ghz Quad Core ram 4gb corsair ddr3 ram but i will get 4gb more soo can this power supply run and the cables are enough? it wount burn anything? can this power supply will handle it? its only 500w and the card needs atleast 450walts to run it will it be enough?

A:Gigabyte Nvidia GTX 770 2GB

In a word, no.

I'd highly recommend buying a Corsair power supply, cheap and nasty PSUs (the one you have would fall into this category) cause trouble more often than not. The PSU is not a component to cheap out on.

http://www.sevenforums.com/graphic-cards/352339-gigabyte-nvidia-gtx-770-2gb.html
Relevancy 33.54%

I am building this PC with a Gigabyte GA-81915P DUO and having problems with the set up. When powering up the only things that happens is the fans come on and the front pannel lights up. No vidio or beeping to indicate a problem.

HELP
 

A:Gigabyte GA-81915P DUO set up

Simplify things.

Make sure all your power connections are secure. If there is a separate 4pin 12V connector instead of the 24 pin power connector make sure it is plugged in.

Start up with just CPU/fan/heatsink, video card and monitor, RAM (one stick if you have two). Reseat RAM modules and video card.

If problem continues, try the same above set up with the MB out of the case and resting on a non conductive surface like the MB box.

If the problem persists post system specs.
 

https://forums.techguy.org/threads/gigabyte-ga-81915p-duo-set-up.366820/
Relevancy 33.54%

My Intel driver and all updates are done on win 7 sp1.  My lan does not connect but wifi does.
Is the gigabyte driver on the motherboard or is it a daughter card ? Help.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19980650
Relevancy 33.54%

I have a gigabyte titan motherboard and it it roughly 6 months old. The motherboard powers on and fans go on and stay on but any video card i put in it will not respond. I think there might be bad drivers on it. Does anyone know how to reset the motherboard or fix this problem?
 

http://www.techspot.com/community/topics/gigabyte-trouble-please-help.32165/
Relevancy 33.54%

I have brand new comp, but i have been noticing some performance issues. Every once in a while(usually when i start winamp or some other programs) the comp will freeze for about 5-8 secs then there will be this weird clicking sound from inside teh case. The system will unfreeze and work well again. Lately it has been worse. I play LOL and WOW and both have been freezing up(not responding) and not un freezing. I get great framerates when im sitting still or moving straight, but when i try to pan my camera it will give me like 1 - 2 FPS. Also LOL, might just be server side lag, because I can still see what people are doing and there isnt any jumping, but my clicks dont go through for several seconds some times.
 

A:Gigabyte GA-890FXA-UD5

What are the rest of your system's components? (Brand and models)
 

http://www.techspot.com/community/topics/gigabyte-ga-890fxa-ud5.154913/
Relevancy 33.54%

Hello, I've got a Gigabyte GA-P35-DS4 2.0 motherboard but carn't get it to run.

It keeps asking for a boot cd, didn't get one in the box, brought it off ebay.
Is there anywhere I can download the boot file?
Thanks
 

Relevancy 33.54%

is this board compatible with my hardware in my siggy?????, will it work with a prescott pentium 4 3.0ghx processor???
http://www.chillblast.com/customer/product.php?productid=89&cat=30&partner=planetprices, i am thinking about getting the motherboard in this link for my b-day but i am worried it will not work like the dfi 865pe motherboard i have.
 

Relevancy 33.54%

i got some new ram today for my mobo... (Corsair Value Select Dual Channel Kit 184 Pin 1G(512MBx2) DDR PC-3200 - Retail)

one of the sticks was bad... so i RMA'ed it back.... when i came back the computer worked fine with the old ram....

i got a machine check error.. (blue screen)

now it wont even post ..
ps. i am a MCP. and i have a deg. in (computer networking) and (computer repair) so you can respond to that lvl
 

A:Gigabyte Ga-k8ns

suspect the bad ram caused an error on the mobo. Try checking with another stick to see if mobo is at fault or ram.
 

https://forums.techguy.org/threads/gigabyte-ga-k8ns.323852/
Relevancy 33.54%

hi guys new here so please be gentle just upgraded fron an asrock coredual-vsta mbb to above and now have gigabyte ga-73pvm-s2h a few problems with the audio and monitor front audio jacks will not work I have loaded all drivers and searched for any updates but I only get the realtek Audio Manager and not the gigabyte one Doesn't matter what I do can't get front jacks to work anyone give me a clue When I installed all relevant nvidia video drivers screen gave 'input not supported' warning and refused to revert which eventually led to a full reinstall as gigabyte ga-73pvm-s2h I could not get into safe mode Monitor is Acer inch analoge which I have run at x in the past I have uninstalled nvidia drivers searched for updates installed them and same problem so I am back on microsoft drivers at x again anyone tell me what I'm doing wrong I can live without the fron jacks but this low resolution is doing my head in lesk

A:gigabyte ga-73pvm-s2h

  
Quote: Originally Posted by lesk


anyone give me a clue?


You forgot to plug them into your new board?








  
Quote: Originally Posted by lesk


so I am back on microsoft drivers at 1200 x 1048, again anyone tell me what I'm doing wrong?


Have you updated the driver for the monitor?

http://www.sevenforums.com/drivers/58432-gigabyte-ga-73pvm-s2h.html
Relevancy 33.54%

Hi

i7 4770 has a turbo speed upto 3.9Ghz. and normal at 3.4ghz

Is it the same as overclocking? Can this processor reach the turbo speed on the H97 motherboard?

Thanks
 

Relevancy 33.54%

Two annoyances Iam hoping a hardware guru can help me on I bought a Bare Bones box to replace a MIA older P MMX The new box has a Gigabyte MoBo K Triton Series GA- VM Athalon PC...glitches??? Gigabyte/New XP processor Gigabyte/New PC...glitches??? DDR RAM I moved a Maxtor GB HDD to that box and Gigabyte/New PC...glitches??? ran the MoBo CD to install drivers and installed Win SE over itself Device Manager shows no conflicts or problems however - If I click quot Restart quot Start Shut Down Restart the thing will not restart just a black screen - On boot up there is always a listing of PCI devices with Vendor IRQ etc on that DOS like screen behind the splash screen and there is a last entry after the list that says quot Verifyiing DMI Pool quot so boot up is slow How can I fix that restart problem and how do I get rid of that list of PCI devices and DMI pool thingy Thanks for listening nbsp

A:Gigabyte/New PC...glitches???

THe devices list is a normal part of the boot up as is the Verifying DMI Pool. You could enter the BIOS and make sure Fast boot is enabled if it is available. Or select load optimized defaults if it isn't. You could also upgrade to WinXP. This OS is more optimized for the faster processors.
 

https://forums.techguy.org/threads/gigabyte-new-pc-glitches.197344/
Relevancy 33.54%

I just got a new mother board that has two 1-gig LAN connection ports on the motherboard. Can I improve overall network connection speeds by connecting two ethernet cables to my Netgear FVS124G router- or will that screw things up? If I can make the two connections -is there any special configuration that I need to make on the TCP/IP settings?
TIA - Rich
 

Relevancy 33.54%

So I built this new system 2 weeks ago, and in the last week I have been experiencing small flickering and driver crashes.

I used driver cleaner to get rid of all things to do with this card, and installed the latest drivers ( Forceware 275.33)

Since doing this this morning I have noticed the flickering is almost gone. It has happened once in the last 4 hours now, this was during a game session. So far, it has not happened on the desktop yet. This morning it was every 30 seconds on the desktop AND in game.

GPU is running very cool, both side panels have been off since I built it 2 weeks ago, MSI Afterburner registers 31 Celcius for the GPU right now.

What is a good way to stress test this card to make sure it is not the card itself? I think it is a driver issue...I HOPE it is a driver issue.

Thank you.
 

A:Gigabyte GTX 570 flickering

Probably the easiest stability check is to use Furmark, and use GPU-Z and/or Afterburner to monitor voltages/temps

See attached screenshot of what the whole thing looks like.

You're looking for artifacts on/around the the Furry doughnut and large fluctuations in voltages, as well as high temps (GPU and VRM)
 

http://www.techspot.com/community/topics/gigabyte-gtx-570-flickering.167208/
Relevancy 33.54%

Hello!

I just bought a new computer with following specs.

Intel core i5-4690k
Gigabyte GTX 960 2gb
Asus z97-k
Seasonic 520w
2x Kingston hyperX fury 8gb
Zalman z9

So,i did build it and all fans (also gpu) are running like they should and all cables are connected. But there is no any output from dvi or hdmi (monitor says "no signal detected")
So what is wrong with this?
I had to bend a bit the metal frame of gpu so it would fit to zalman z9 but i doubt it has nothing to do with this problem.
 

A:Gigabyte gtx 960 problems.

Please answer
 

https://forums.techguy.org/threads/gigabyte-gtx-960-problems.1154197/
Relevancy 33.54%

Which one would you get? I'm soon going to get one, and I'm not sure which to buy...

I've used EVGA cards and am currently using one, and customer service is great, and I love EVGA precision.

However, the Gigabyte has three fans and is already overclocked (I'll still overclock it :P). Also, will EVGA Precision work with the Gigabyte card?

EVGA 670

Gigabyte 670

Thanks

Edit: Also, it seems the Gigabyte one has an 8 and 6 pin connector, while the EVGA one has 2 sixes.

A:Evga GTX 670 vs Gigabyte 670?

FWIW I bought the EVGA 670 on Amazon today and is supposed to be delivered tomorrow. Can't address your particulars as I have been previously a Radeon owner...I am hoping this "upgrade" from my 5770 will allow my sony vegas 11 pro gpu acceleration capability to work.

http://www.sevenforums.com/graphic-cards/229143-evga-gtx-670-vs-gigabyte-670-a.html
Relevancy 33.54%

A friend of mine is looking for a psu for his build. I'm not sure about his whole setup, but he is going to run a HD5770 gpu and a Phenom II X2 cpu. The thing is, the only psu that sounds better than Aopen and Raidmax(where he lives) is a Gigabyte Odin 585.
He can't do online orders from where he is and the only psu that is available to him is the Odin 585.
Should he go for it or is it ultimate crap?
 

A:Gigabyte Odin 585? ?

Some of the higher end RAIDMAX units aren't complete crap, same with the AOpen ones. The Gigabyte Odin I'd be more willing to trust but its not that good either, 16 and 18 AMPs on the two +12 volt rails. They can't custom order anything else?
 

https://forums.techguy.org/threads/gigabyte-odin-585.922426/
Relevancy 33.54%

After upgrading your bios to F9, does anyone know what is the maximum Processor and Ram speed you can install? For example, can you use a P4 3ghz with HT and 3200 DDR?
 

A:Gigabyte GA-8lEXP

According to Gigabyte, your board supports only 400/533 MHz FSB and DDR266(PC 2100)/DDR200(PC1600) memory. So, I guess the answer is no to both.
 

https://forums.techguy.org/threads/gigabyte-ga-8lexp.199035/
Relevancy 33.54%

I'm so curious to see if other Gigabyte users are having this issue:

If the FSB is set to 200Mhz any games in either Win2000 or XP Pro will crash and system will simply reboot (no error messsage). Now, if the FSB is set to anything below 198Mhz, all games run flawlessly. I've checked cpu temp and it's always under 60C. I've tried 3 different types of DDR RAM (Ultra, Kingston & Corsair).

Here's my specs-
GIGABYTE GA-7N400 Pro2
XP3200 AMD 2.2Ghz
400W POWER SUPPLY
ATI RADEON 7500 AGP
2 ATA/100 7200rpm MAXTORS 20gb
WIN2000Pro & XP Pro SP1
 

A:Gigabyte mbd blues

Is your BIOS up to date as far as version? I would agree it is a memory timing issue. Perhaps you can set the FSB to 200 and adjust your memory timings not to the default.

Edit:

It also appears that you Radeon card is AGP 2X/4X and may not work correctly in the 4X/8X motherboard as it states it only supports 4X/8X AGP cards.
 

https://forums.techguy.org/threads/gigabyte-mbd-blues.305074/
Relevancy 33.54%

I found the size of ALL (system, hidden, ect.) and subtracted that from total size. I have half a gigabyte that i don't know where it is. (i should have 59.5 left but i have 59) is this just simply deleted files on stored on this HD catching up to me???

A:half a gigabyte of...idk

well, i dunno what happened to this thread XD no posts

Umm....could these be bios updates and such that can't be viewed through properties (select all in c drive with show hidden and protected sys files) file size?

http://www.techsupportforum.com/forums/f10/half-a-gigabyte-of-idk-264843.html
Relevancy 33.54%

Hi guys, I have a quick question, I am buying a new case..
just wondering if my mobo will fit in this one, I have a Gigabyte S Series am2 socket ATX..

this is the case.

newegg . com
/Product/Product.aspx?Item=N82E16811121042


thx!
 

A:Gigabyte Mobo

No, that case is a mini case designed only for microATX, you want one from this list: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2000090007 1054808287&name=ATX Mid Tower, those are all ATX mid towers.

Its recommended that you do NOT use the built in case powersupplies.
 

http://www.techspot.com/community/topics/gigabyte-mobo.122795/
Relevancy 33.54%

Hi!
Do you know how many hex bytes for 1GB? Are there any online convertor for that?

A:How many hex bytes for gigabyte

8 bits in a byte (b)
1024 bytes in a kilobyte (KB)
1024 KB in a megabyte (MB)
1024 MB in a gigabyte (GB)

Hexadecimal bytes would be base 16 - think your better off googling it!!

http://www.sevenforums.com/general-discussion/160487-how-many-hex-bytes-gigabyte.html
Relevancy 33.54%

G'day the only problem I've been having after playing games is an error message pointing to a file called GSvr exe It's never been a 'real' problem because it doesn't seem to do any harm it's just annoying I contacted Gigabyte because I was sure the issue was related GSvr.exe Fix Gigabyte's - to their motherboard I'm posting this so that others in the same boat have an idea GSvr.exe - Gigabyte's Fix of Gigabyte's official fix Anyway their speedy response Dear Jack Thank you for your kindly mail and inquiry About the issue you mentioned because the GSvr exe refers to the DESA program so please try following steps Please remove current DESA Dynamic Energy Saver Advanced program complete from your system then download install the latet DESA program from our website and test again to download the latest DESA please CLICK HERE If problem still occurs please update your motherboard BIOS to the latest version and test again To download the latest F BIOS version please CLICK HERE And for BIOS update instructions please CLICK HERE Please do not forget to load BIOS fail-safe default setting and please also do not try to overclock your system at this moment At last if you still have any further question or suggestion about our products service please do not hesitate to contact with us We will try our best to help you resolve the problem ASAP Regards GIGABYTE TECHNOLOGY

A:GSvr.exe - Gigabyte's Fix

I have always found dealing with any computer parts manufacturer that they give you useless things to occupy your time and bandwidth. If it solves your problem then great if not i would do a clean install of vista...

Yes i am one of those people who believes a clean install of an OS will fix anything and that is because 98% of the time it does.

http://www.vistax64.com/general-discussion/181269-gsvr-exe-gigabytes-fix.html
Relevancy 33.54%

Anyone else having fun with these?
I have just finished building 6 new machines based on this board and 4 of them have failed to accept the drivers for the sound card. In each case the device manager shows a PCI device with no driver and the sound card is missing.
2 of the 6 boards are OK.
They have all be built by me and are otherwise all the same.
I have downloaded the latest drivers from the web site but this did not fix the problem.
 

A:Gigabyte GA-945GCM-S2L

1. Have you verified the BIOS version on each board? (in fact, there was a release in June, 08 to support onboard codec)

2. Summary/info of all Device Manager problems would also be helpful

Click Start->Run, enter: msinfo32. (It may take a short while till a second window opens)
Expand Components (click + sign next to it)
Click Problem Devices. Anything appear?
If yes, click it, then Edit->Select All then Edit->Copy and then paste into your next post

 

http://www.techspot.com/community/topics/gigabyte-ga-945gcm-s2l.117455/
Relevancy 33.54%

I just got a gigabyte R7 260 in the mail changed my psu to a 500 watt and turned on my computer everything looks good I ran the cd to install the drives and it crashes every time when installing. So I go to device manager to try to update drives it says they are up to date , but there is a problem with it and it isn't using resources, weird thing is my on board graphics say the same thing now.So do I need to disable 1 or ? .I have never had problems installing a card before.I ran a dxdiag it shows no graphics at all, but that now I'm running 32 bit weird . thx for the help

What is says on both =Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52) I don't know how to change this
 

A:Gigabyte R7 problem

I sent it back if the next 1 does it. Then I'll try to fix it.
 

http://www.techspot.com/community/topics/gigabyte-r7-problem.205809/
Relevancy 33.54%

Hello guys, I've got a simple question I'm looking for anyone who tried to OC this card and could tell me his or hers experience with it. Whether it runs too hot. What is the perfect clock speed and etc.

Thanks for any replies.
 

A:Gigabyte GTX 780 GHz overclocking

I have one - in an SLI configuration with an EVGA SC.
Without upping voltage mine doesn't really OC that well ( 1070MHz core vs 1020MHz it ships with). Add a bit of voltage and it hits 1120 core (1225 boost) easily enough. It can go a little higher, but the EVGA can't keep pace (the Gigabyte is B1 silicon). Be aware that the Gigabyte's stock clock means absolutely nothing. Gaming with the card will peg the frequency at 1160-1198 depending upon the game or benchmark. Here's a Heaven run to show what I mean...

 

http://www.techspot.com/community/topics/gigabyte-gtx-780-ghz-overclocking.205418/
Relevancy 33.54%

I recently bought this Motherboard to upgrade my VERY OLD system. The Motherboard is a Gigabyte GA78LMT-USB3. Yes, I know it's not a high performer and it's an older model but i'm not a gamer. This board has 3 display ports but it won't allow me to use the DVI or HDMI by itself. It only works if I use the 15 pin D-Sub as my main display and one of the other as a second monitor. I only need one monitor. Is there a setting that will enable me to use HDMI or DVI by itself or am I stuck with using the 15 pin only? Specs If it helps: AMD FX6300 Black Edition CPU with 16 GB of G.Skill Ripjaws X Series Ram overclocked at 1600MHzThank YouJohn

A:Gigabyte Motherboards

We want to help you. But few of us know that board by memoryDid you read the manual?http://www.manualslib.com/manual/409831/Gigabyte-Ga-78lmt-Usb3.htmlCheck and see if the BIOS lets you set which is monitor #1Otherwise, you would go into the Windows display properties and select which port you want to be the first monitor.See here:https://support.microsoft.com/en-us/kb/976064Guided Help: Dual monitor setup is easy in Windows 7! It is almost the same thing in Windows XPYes, you only want one display, but you have to use the dual display tool to select which display is #1.Does that help? 

http://www.computerhope.com/forum/index.php/topic,157471.0.html
Relevancy 33.54%

On installation, my zalman case provides a front panel USB plug with 19 sockets and one blank. This motherboard has two USB male connecters 1 and 2 each with 9 pins and one blank. How can I connect or modify this to connect please?
 

A:Gigabyte ga-f2a55m-hd2 m/b

Forget this, the larger one I guess is for usb3 which is not on the board!!!!!
 

http://www.techspot.com/community/topics/gigabyte-ga-f2a55m-hd2-m-b.204478/
Relevancy 33.54%

Probably a very fundamentally easy question, but I'm cure if this motherboard is compatible with this card :

http://www.newegg.com/Product/Product.aspx?Item=N82E16814500271

It's a GeForce GTX 650 PCI Express 3.0. My mainboard is only PCI Express 1, I believe. Is this card backwards compatible? I can't seem to find any info on the web.

Thank you very much for reading, and I appreciate any information !
 

A:Gigabyte P35-DS3R

Is this card backwards compatible?Click to expand...

Applications

PCI Express operates in consumer, server, and industrial applications, as a motherboard-level interconnect (to link motherboard-mounted peripherals), a passive backplane interconnect and as an expansion card interface for add-in boards.
In virtually all modern (as of 2012) PCs, from consumer laptops and desktops to enterprise data servers, the PCIe bus serves as the primary motherboard-level interconnect, connecting the host system-processor with both integrated-peripherals (surface-mounted ICs) and add-on peripherals (expansion cards.) In most of these systems, the PCIe bus co-exists with one or more legacy PCI buses, for backward compatibility with the large body of legacy PCI peripherals.
Read the full article here: http://en.wikipedia.org/wiki/PCI_Express
 

https://forums.techguy.org/threads/gigabyte-p35-ds3r.1093750/
Relevancy 33.54%

i just got a new gigabyte radeon 9250 and i went to ati site to get new drivers for my card. but i don't know if the drivers work on gigabyte cards. could someone tell me if ati catalyst drivers work on gigabyte radeons
 

A:gigabyte radeon

Yes, gigabyte is just the manufactuer of the card. ATi still makes the GPU.
 

https://forums.techguy.org/threads/gigabyte-radeon.318734/
Relevancy 33.54%

I have recently purchased the 8X-GA-7VAX K7 Triton 400 series. Also was suggested to try the A-open GFMX440 64mb vid card 4x. I can't seem to get the video going. My board posts and the monitor works on another puter. Is there a jumper that I'm missing or what??
 

https://forums.techguy.org/threads/gigabyte-board.113880/
Relevancy 33.54%

Hello everyone and to start off, the title pretty much says everything.
I can use Safe Mode and Netwroking but when I normally sign in it BSOD's me
right after log in. If anyone has any soloutions please help. I remeber the lines of
error codes which was 0x0000007E (0xFFFFFFFC0000005, 0xFFFFF880068c7873, 0xFFF66688003362708, 0xFFFFF88003361030). It has BSODed me
5 times now, please help...........

Here are the files from the memory dump....

A:Gigabyte BSODing Me After Log In

Does anyone have any idea what is wrong? Come on, I need my computers.. :P

http://www.sevenforums.com/bsod-help-support/216661-gigabyte-bsoding-me-after-log.html
Relevancy 33.54%

Hi Bought this motherboard today Was all happy about it and all Got home took my old motherboard out and put this one in Plugged in everything correctly and double checked it Everything went fine Switched my computer on bios screen shows up pressed DEL to go into the bios and play around with the settings that please me the most when suddenly my computer switches off by itself From there on I can t seem to switch on with this motherboard on At first it would switch on for less than a second and then now doesn t even do that It just lights up M52L-S3P Gigabyte the power led for less than a second and bam doesn t switches on I ve tried switching on with a different PSU but it didn t work either I ve tried also only switching it on with nothing but PSU cables memory and cpu and it didn t work either Does anyone have any clues Gigabyte M52L-S3P about what is happening Getting a bit frustrated here EDIT Switched it on after some frustrating hours and I noticed something strange Without the V power connector it switches on but if I plug it in it just doesn t Faulty motherboard nbsp

A:Gigabyte M52L-S3P

What are the rest of your PC specs?
 

http://www.techspot.com/community/topics/gigabyte-m52l-s3p.136741/
Relevancy 33.54%

Hi guys i need your help i was thinking of getting a GT 440 to replace my card now i know about the psu and i need a new one for this card but will the Dell Inspiron Case make the card too hot? will it overheat?
 

A:Gigabyte Geforce GT 440 1gb

It's an entry level card so it shouldn't get too hot. They also come with various heatsinks and fans, some only have a fan, others have small fans while others have large fans and take up two slots.

But it depends on the exact model of Inspiron you have as there are hundreds of different models with significantly different case designs and sizes.
 

https://forums.techguy.org/threads/gigabyte-geforce-gt-440-1gb.1048714/
Relevancy 33.54%

I need a new board, Im looking for either a gigabyte or asus. It needs to be am2+ and capable for gaming. I have a big video card so the south bridge needs to not come too far up from the board. Please help me out with this. Does not need to be SLI. ~100 not too far over
CPU- Phenom 9950 BE

Video- 9800gtx+ < this takes up a lot of space

RAM- OCZ Titanium 4 gb 800
 

A:Gigabyte or Asus?

Hi insanewhitekid
I will throw this one at ya 790X chipset
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128387
 

http://www.techspot.com/community/topics/gigabyte-or-asus.133914/
Relevancy 33.54%

Help Needed!!! My Motherboard fried and this is a first for me so I'm unsure what to do next. I shopped around have not been able to find the same motherboard and I have been pointed to many other motherboards but I'm not sure which one is equal to what mine was.

Fried Motherboard was

Motherboard Name Gigabyte GA-8INXP (5 PCI, 1 AGP, 4 DDR DIMM, Audio, Gigabit LAN)
Motherboard ID 12/30/2002-E7205-6A69WG00C-00



Selena
 

A:Gigabyte GA-8INXP

ahh, asus, msi, and gigabyte still make boards of similar caliber. i reccomend finding something based on intel's i865pe chipset
 

http://www.techspot.com/community/topics/gigabyte-ga-8inxp.49437/
Relevancy 33.54%

Here Are two motherboards I'm looking at now...

Asus P8P67
And
Gigabyte GA-P67A-UD7

Edit:The build will be a do any and everything, from gaming,surfnet,vbox,photo & video edit, to sit there and look pretty...lol
I'm just looking for "better" as in Specs,performance, owner input, upgradeable,ect....

Please let me know what you guys/gals think about them.
Which one is better for a new build??

Thanks, jeep

A:Asus Vs. Gigabyte...help??

No such thing as "better" per se.

What is the target application or application set? That will define the scope of "better".

I do like the dual RAID support on the Asus board (but my browser is not showing anything on the details tab at NewEgg for that board, so I have not done a thorough compare.

In my opinion, both of those boards are overpriced.

http://www.sevenforums.com/hardware-devices/139242-asus-vs-gigabyte-help.html
Relevancy 33.54%

Warning This is a long and winding story read at your own risk Okay about month s ago I had a K8U Dead Gigabyte problem on my MoBo when it simply wont sound a POST code or anything else Fan s spin and that s just about it I called Gigabyte Mobo Manufacturer and they replaced my mobo with a quot Certified quot refurbished one Worked fine until about minutes Called them went over the same replacement process with another quot Certified quot refurb Took forever but once I got it worked fine No problem s until about a week ago Same exact Dead Gigabyte K8U symptom s I called Gigabyte Again they told me it might be my CPU so I head over to my local computer shop and buy a new CPU and Mobo for good measure Put in new Mobo with old CPU nada New CPU with old Mobo nada New CPU and new Mobo Drum Roll Nada Another symptom came up whilst testiing with the new Mobo not nuff power to system Fan s woud spin for a few seconds and than dead This is without any IDE drives or my AGP vid card So with logical reasoning I bought a new PSU SAME EXACT THING It then came to me that it might be my On Off Switch on my case so I bought a new switch and ordered a new case while I was at it The dead fan thing stopped but still no POST beep or display on monitor The new case came in today so I put it together in the new one but still nothing I ordered a new Vid Card from XFX and should be getting that soon So everything has been replaced excpet for my RAM One time I put it in the wrong way so the DDR slot was all burned up but I put it the right way after and it worked Btw this is before this whole drama I need expert help all my vital job work is done on that PC so I cant wait Thank s in advance for soothing my woes --Foyaeman nbsp

A:Dead Gigabyte K8U

well are you making sure you buy good quality psu's and not cheap generic ones? theres a whole bunch of story that goes behind that - just search the forum..

check that there's no shorting to the case?

all power connectors (including extra power for the motherboard if it needs it) connected, and secure?

maybe invest in a UPS or Surgemaster or the likes, because it could also be caused by irregular/spiked voltages coming throught the pc..
 

http://www.techspot.com/community/topics/dead-gigabyte-k8u.52358/
Relevancy 33.54%

What type a sticks would be the best? (has to be atleast tripple channel and prefer atleast 12GB)
 

A:Best RAM to use with the Gigabyte GA-X58A-OC?

Use the memory QVL as a guideline, but as a general rule Corsair, Kingston, Crucial and G.Skill work fine with Gigabyte boards. You might run into some compatibility problems if you are populating all six DIMM's (6 x 2GB), so I'd recommend a 3 x4GB kit. The lower density Vengeance kits are on the QVL, so your probably safe with a DDR3-1600C9 kit. If you're planning on overclocking, either move to a CL8 or 7 kit, or move to a DDR3-1866/2000 and see which combination of bandwidth vs latency gives you the best performance. You probably won't see any substantial gains, but this is dependant upon whether you want to get the RAM solely for the density you need (12GB), or because you enjoy the sport of overclocking and tweaking - I'm assuming the latter given the board you're using.

Here's the Kingston memory configurator results....
...and Crucial's

Corsair and G.Skill seem unaware of the X58A-OC's existence as far as their momory configurators are concerned.
 

http://www.techspot.com/community/topics/best-ram-to-use-with-the-gigabyte-ga-x58a-oc.176048/
Relevancy 33.54%

Is this mainboard good to use with the new AMD Phenom CPU and use the mainboard to overclock?

http://www.newegg.com/Product/Product.aspx?Item=N82E16813128075
 

A:Gigabyte Ga-ma790x-ds4

Indeed it is. AMD has put out a utility called AMD OverDrive for overclocking the Phenoms: http://www.amd.com/us-en/0,,3715_15337_15354_15359,00.html
 

https://forums.techguy.org/threads/gigabyte-ga-ma790x-ds4.664885/
Relevancy 33.54%

Just wondering if this board is dead I ve been building not MB Gigabyte booting my own computers for years and havn t come across this This is the first integrated video Gigabyte MB not booting MB i ve ever used I installed this board and it installed WinXP PRO and other software Checked cpu temp from Bios a few times between and C About three days later around or restarts the computer does not post on a cold restart a few more tries and I cant even power down using the front power button Pulled all connections one by one to the bare necessities Tried starting with either stick of ram Cleared CMOS using method in installation manual Re-connected everything testing as I went and nothing still pulled just video cable from back restarted got a beep finally Turned off machine Re-connected monitor cable and everything was fine for about another restarts Now will not post at all after any changes Still have to power down using the PSU power switch Even tried installing a standalone video card No Post no beeps Info Motherboard Gigabyte onboard Video Model Name GA-K N GMF- M B Rev BIOS Ver n a Stock System Configuration VGA Brand Nvidia Model Onboard Geforce CPU Brand AMD Model Athlon Speed GHz Operation System Win XP PRO SP Memory Brand Corsair Type DDR Memory Size gig - x Speed PC Power Supply W PSU Thermaltake AD HDD WD JD SATA CDD Liteon s Mon Polyview quot LCD analog connection only nbsp

Relevancy 33.54%

Hi peeps,

I just recently purchased this card every hour or so my game freezes and goes to desktop sometimes it says "display driver has stopped responding but has recovered"
Iv'e installed all latest drivers even did a format still happens.Any ideas???

Fairly new system

i7990x @3.47ghz
12GB Vengance Corsair
Asus rampage 3 Black edition
Corsair tx850watt
Seagate barracuda 1TB
Windows 7 64bit
 

A:Gigabyte HD 6970

Have you overclocked it?
 

http://www.techspot.com/community/topics/gigabyte-hd-6970.176904/
Relevancy 33.54%

trying to put my 40 gig quantum fireball plus hard drive onto another computer that currently has a 15 gig HD, but for some reason it will not boot up gets stuck. The 40 gig has an operating system and many files and I did not want to format. The motherboard specs are: Gigabyte ga5-ax bios v.4.51, I am thinking that the motherboard will not support the larger hd and I probably need to flash the bios, What do you think? does anyone know if the motherboard supports the hd, cannot find it on their website.
 

Relevancy 33.54%

I'm trying to free up space on my labtop and i'm doing a computer analysis on finding what is using up my computer. Tracing where all the memory is coming from and what is using up my space, i've come to find out that through my calculations i've discovered that i am suppose to have at least a gig left. But my computer says that i have barely any memory left to use. Whats going on? need help...

Not trying to be prideful here but i doubt that i had miscalculated. I checked.

A:Unknown Gigabyte

Windows manages your memory constantly depending on what demands open programs and system processes place on it and uses memory for system processes and maintenance when other aps are not using memory.

Space and memory are two different things.

You can determine exactly what is taking space on the hard drive by using Windows Explorer - the size of every file if you want to.

How much ram do you have and what kinds of problems are you experiencing?

http://www.bleepingcomputer.com/forums/t/60199/unknown-gigabyte/
Relevancy 33.54%

Gigabyte i-RAM is as some of you might already review Gigabyte i-RAM know a SATA hard disk device that uses normal DDR memory sticks Thanks to that it s faster than conventional hard disk drives the bottleneck being SATA- interface which Gigabyte i-RAM review limits the transfer speed to MB s The good news is that the transfer rate stays there Random access memory is also quick for well random Gigabyte i-RAM review access Seek times are pretty close to zero milliseconds I got this drive yesterday and I don t yet have all the memory I want Gigabyte i-RAM review for it so I took GB off my mainboard and put it into the i-RAM x Kingston PC MB ValueRAM XP x installed fine and quickly to it after I had removed unnecessary features with nLite After installing the OS and the applications I use most I have about MB free on this partition Yes not much but enough for now I can install the space-consuming applications on other partitions The thing I like most about this is of course the speed While MB s might not sound like much many drives especially RAID- combinations have higher max transfer rates it s constant and the random access time is what counts more in desktop use There is no delay in refreshing desktop icons or accessing start menu items Right-click quot New quot context menu appears instantly unlike in my other Windows installation The responsiveness overall feels much better It s quite amusing to defragment the partition with PerfectDisk too it takes about - seconds total I have read complaints about instability with i-RAM but so far I ve had no problems I ll install Acronis TrueImage later for backups and the whole PC is behind an UPS Not that it really matters because the i-RAM has its own backup battery charged by the PCI bus Pros - speed of course - ease of use it s just a SATA hard disk Cons - capacity how much is enough really - price GB ratio Another review by the Tech Report nbsp

A:Gigabyte i-RAM review

Isn't SATA 150 actually 150 megabits per second instead of megabytes? Also, where can this thing be bought?
 

http://www.techspot.com/community/topics/gigabyte-i-ram-review.55206/
Relevancy 33.54%

I have the 8KNXP board and under the “Advanced” setting in the CMOS, the “SCSI Boot Order” devices are not constant. It should always have the GigaRAID, Intel SATA RAID, and Silicon SATA RAID. However, sometimes when I boot up, I get none, other times I get only the Intel SATA RAID, and yet other times I get all three. I am running BIOS version F5.

Thanks in advance,
 

https://forums.techguy.org/threads/gigabyte-8knxp.147874/
Relevancy 33.54%

Just ordered..

Gigabyte GA-990FXA-UD7 Motherboard [GA-990FXA-UD7] - $279.00 : PC Case Gear

Gigabyte GA-990FXA-UD5 Motherboard [GA-990FXA-UD5] - $229.00 : PC Case Gear

Comparison

A:Gigabyte GA-990FXA-UD7

lol, I love the astrix, "graphics cards sold separately".

http://www.sevenforums.com/hardware-devices/166329-gigabyte-ga-990fxa-ud7.html