Windows Support Forum

DVD Burning Problem

Q: DVD Burning Problem

I am quite new to burning dvd s and would like advise on the problem i have I have looked at many forums trying to search for the solution to my problem and have had no luck I have an iso file which i would like to burn to a Verbatim DVD R blank disc but i seem to have problems I ve used many programs but i have had no success using any of them The name of my cd drive is HL-DT-ST DVD -RW GWA B When using nero i get an Unspecified Recorder Error The error log is as follows Windows XP IA WinAspi - NT-SPTI used Nero Version Internal Version Recorder Version E - HA TA - Adapter driver HA Drive buffer kB Bus Type via Inquiry data Connected to MMC as unknown drive with class-nr Drive is autodetected - recorder class Std MMC recorder CD-ROM Version E - HA TA - Adapter driver Problem Burning DVD HA Scsi-Device-Map CdRomPeripheral HL-DT-ST DVD -RW GWA B atapi Port ID DMA Off DiskPeripheral ST AS atapi Port DVD Burning Problem ID DMA On CdRomPeripheral PU X VWA Q aitcvux Port ID DMA Off CDRom-Device-Map HL-DT-ST DVD -RW GWA B D CdRom PU X VWA Q I CdRom AutoRun Excluded drive IDs WriteBufferSize Byte BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Inquiry Global DVD Burning Problem Bus Type default Check supported media Disabled Burn DVD Image Text File SCSIPTICommands cpp Line LockMCN - completed sucessfully for IOCTL STORAGE MCN CONTROL Text File Burncd cpp Line Turn on Disc-At-Once using DVD media Text File DlgWaitCD cpp Line Last possible write address on media MB Last address to be written MB Text File DlgWaitCD cpp Line Write in overburning mode NO enabled CD Text File DlgWaitCD cpp Line Recorder HL-DT-ST DVD -RW GWA B Media type DVD R Disc Manufacturer ID Media Type ID lt gt Product revision number Disc Application Code Extended Information Indicators Text File DlgWaitCD cpp Line gt gt gt Protocol of DlgWaitCD activities lt lt lt Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE - CD-ROM Mode ISO indices index not provided original disc pos not relocatable disc pos for caching writing not required not required - gt TRM DATA MODE config wanted index blocks length blocks D HL-DT-ST DVD -RW GWA B -------------------------------------------------------------- Text File ThreadedTransferInterface cpp Line Prepare D HL-DT-ST DVD -RW GWA B for write in CUE-sheet-DAO DAO infos MCN quot quot TOCType x Session Closed disc fixated Tracks to Idx Idx Next Trk TRM DATA MODE x FilePos ISRC quot quot DAO layout Start Track Idx CtrlAdr Size NWA RecDep lead-in x x x x x x lead-out x x Text File SCSIPTICommands cpp Line SPTILockVolume - completed successfully for FSCTL LOCK VOLUME Text File Burncd cpp Line Caching options cache CDRom or Network-Yes small files-No lt KB Phase File dlgbrnst cpp Line Caching of files started Text File Burncd cpp Line Cache writing successful Phase File dlgbrnst cpp Line Caching of files completed Phase File dlgbrnst cpp Line Burn process started at x KB s Text File ThreadedTransferInterface cpp Line Verifying disc position of item not relocatable no disc pos no patch infos orig at write at Text File Cdrdrv cpp Line ---- Disc Structure Physical Format Information h ---- Media Type Layer Address h AGID Length Book Type DVD R Part Version x Disc Size mm Maximum Rate F h Number of Layers Track Path Parallel Track Path PTP Layer Type recordable Linear Density um bit Track Density um track Starting Physical Sector Number of Data Area h DVD-ROM DVD-R -RW DVD R RW End Physical Sector Number of Data Area F h Data in Burst Cutting Area BCA does not exist Disc Application Code h Extended Information indicators h Disc Manufacturer ID MCC Media type ID Product revision number Number of Physical format information bytes in use in ADIP up to byte Media Specific D - MCC C - F B B T Tl B C C C D - C A A - E E D Z C A A E - E D Z C - C C Tp c lt - C C B fB DF C - C C T c lt E - A A u X Y - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Text File DVDPlusRW cpp Line Start write address at LBA DVD high compatibility mode Yes Text File ThreadedTransfer cpp Line Pipe memory size SPTI - File SCSIPassThrough cpp Line CdRom SCSIStatus x WinError NeroError - Sense Key x KEY MEDIUM ERROR Sense Code x Sense Qual x CDB Data x A E Sense Area x E Buffer x ad d Len x x BA D B DD C F x E EC CF F BC C A x F E E B A BE FF F BE F CDR - File Writer cpp Line Unspecified Recorder Error D HL-DT-ST DVD -RW GWA B Text File DVDPlusRW cpp Line EndDAO Last written address Phase File dlgbrnst cpp Line Burn process failed at x KB s Text File SCSIPTICommands cpp Line SPTIDismountVolume - completed successfully for FSCTL DISMOUNT VOLUME Text File Cdrdrv cpp Line DriveLocker UnLockVolume completed Text File SCSIPTICommands cpp Line UnLockMCN - completed sucessfully for IOCTL STORAGE MCN CONTROL Existing drivers Registry Keys HKLM Software Microsoft Windows NT CurrentVersion WinLogon AllocateCDROMs Security Option I hope someone can solve my problem would be much appreciated nbsp

Relevancy 100%
Preferred Solution: DVD Burning Problem

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: DVD Burning Problem

I suspect the DVD drive is the problem and the solution would be to replace it with a better brand and/or model. I did a google search on your DVD drive model and found a number of reported problems with it.

http://www.techspot.com/community/topics/dvd-burning-problem.103482/
Relevancy 49.45%

some nero burning user veteran??problem burning cdr ,dvdrs.i cant burn a cdr.with windows media player is posible.also i use clone dvd with sucess. with nero is posible to erase a cdr-w.the problem is i cant record a cdr.when it comes to 3% to 8% the program tell "the burn failed"some advice?thanks for the attention
 

A:some nero burning user veteran??problem burning...

I am a "Nero Veteran", war veteran, etc.. etc.. The reason your having problems is simple. Some discs cannot be copied, as they may be copy protected or contain errors. If you are unsure if your disc can be copied,
run a trial in the "simulation" mode. Click on "More" at the bottom of the page and select "Simulation".
 

https://forums.techguy.org/threads/some-nero-burning-user-veteran-problem-burning.234868/
Relevancy 39.56%

I bought a Dell Inspiron laptop new in Italy in the close burning the and keeps DVDs drive the fails windows burning spinnin When but December from a major computer store The computer came installed with Windows Home Premium Italian and I have installed on it an original version of Microsoft Office When burning DVDs the windows close and the burning fails but the drive keeps spinnin XP Professional Edition English The CD-ROM unit is a Matsushita DVD -RW UJ Since I bought the computer I have sometimes had difficulty burning DVDs with the When burning DVDs the windows close and the burning fails but the drive keeps spinnin built-in Windows burner function that I access from Explorer Often in the past I have ended up with partially written DVDs Nevertheless by using high-quality DVDs I have been able to burn DVDs successfully most of the time using the Windows utility I last used the utility successfully a couple of months ago when I burned a couple of DVDs to backup some photos Since yesterday I have been trying to backup my most important files onto DVDs The attempt has failed in every case First I copy about GB of files from drive C onto drive D in Explorer These are several hundred files divided into three different directories consisting mostly of PDF Word Excel and JPG files some of them with names in foreign scripts like Cyrillic Japanese or Chinese Then I insert a new DVD either Verbatim or TDK and attempt to master the DVD by selecting the option write to disk from the Explorer menu whether from When burning DVDs the windows close and the burning fails but the drive keeps spinnin the menus at the top of the screen or by right-clicking on drive D in the lefthand pane of the screen A window pops up asking me for the name of the disk whether I want it to be flash or one-time only and the recording speed x x x etc Once I click continue to start burning the DVD a window pops up to tell me that Windows is making an image of the disk and then the window tells me that it has begun mastering the disk giving me a countdown of how many minutes are left minutes to minutes depending on the speed I choose But no matter what name I give to the disk and what recording speed I pick after - seconds the popup window and the Explorer window both suddenly close and the DVD unit s writing light goes out but the DVD unit continues to whir at high speed forever Here are the results I got yesterday with separate DVDs On the first DVD I used Windows s burn utility on a Verbatim DVD and I ended up with files burned onto the DVD making it unusable On the second try I used some simple burn software that I had used before Roxio Burn on a TDK DVD and ended up with files burned onto the disk but from different folders than the files burned by Windows On my third attempt after going offline shutting down my antivirus software AVG and using Task Manager to shut down processes from that other burn software Roxio Burn I used Windows s burn utility again on a TDK DVD and ended up with the identical files that had I ended up with the first time though this time I had chosen a lower writing speed In all three of these attempts the DVD unit continued to whir after the windows had closed until such time as I ejected the disk manually When I first encountered this problem yesterday I thought the problem might be caused by my antivirus software AVG Free Edition interfering with the writing process because after one particular automatic update by AVG about two months ago I began having problems with AVG blocking Skype and placing some of my Nokia cell phone software in quarantine But by disabling the HIPS element of AVG I was able to resolve those problems several weeks ago and begin using Skype successfully again But just to be sure today I disinstalled AVG completely and installed Microsoft Security Essentials Because I had read in a forum online that Windows might have conflicts with other burning software that was also installed today I also disinstalled the o... Read more

A:When burning DVDs the windows close and the burning fails but the drive keeps spinnin

My guess would be theres something wrong with the dvd drive.I also have the same computer.Either the laser in it is shot or needs cleaned or the whole drive has failed.
 

https://forums.techguy.org/threads/when-burning-dvds-the-windows-close-and-the-burning-fails-but-the-drive-keeps-spinnin.1027134/
Relevancy 39.56%

I have trouble being able to burn. I am using a LITE-ON 16X DVD Burner and it is not cooperating. I have tried Nero 7 Ultra, Roxio Easy CD Creator 9 and Ashampoo Burning Studio 6.

I am trying to back up some wmv files to a DVD and it "hangs" at the beginning of the process. My worst case scenario: the computer restarted every single time I tried to burn using Nero.

What could be the problem? How can I resolve this? The drives are functional for everything else and I have swapped the drive to my other tower and it burns on the other tower.

Edit: when I say back up, I mean Data-DVD...not actual DVD playable on a player

SPECS: P4 3GHz 1GB DDR RAM LITE-ON 16X DVD Burner (SHM-165P6S)
 

Relevancy 39.56%

Lately when I try to burn a CD using Windows Media Player, I get this: Windows Media Player encountered a problem while burning the file to the disc. For additional assistance, click Web Help.

I know it's not the kind of discs I'm using, because I've burned stuff to them before. I've tried setting a lower burn speed, I've tried burning different files, and I've even tried burning files that I burned to discs before. I've checked for updates for the media player, but there aren't any.

I don't think the problem is with the lens, because my computer is still able to read discs.

Does anyone have any idea what could be causing this?

Any advice on what I can do to fix it would be greatly appreciated.

A:Problem burning CD's

May be you forget to create multisession disk in your last write session and your disk become write protected.

http://www.bleepingcomputer.com/forums/t/209060/problem-burning-cds/
Relevancy 39.56%

Hi I have an LG DVD RW it worked properly but few days ago i tried to burn an iso image and it was not burning could you pls help Thanks Device HL-DT-ST-DVD-RAM GSA-H N E DVD problem burning ATA Firmware Version DVD burning problem Vender U Serial Number J Buffer Size KB This the ImgBurn log I ImgBurn Version started I Microsoft Windows XP Professional Build Service Pack I Total Physical Memory KB - Available KB I Initialising SPTI I Searching for SCSI ATAPI devices I Found CD-ROM and DVD RW RAM I Operation Started I Source File C win beta - client en-us Ultimate-GB CULFRE EN DVD iso I Source File Sectors MODE I Source File Size bytes I Source File Volume Identifier GB CULFRE EN DVD I Source File Volume Set Identifier f a MS UDFBridge I Source File Application Identifier CDIMAGE TM I Source File Implementation Identifier Microsoft CDIMAGE UDF I Source File File System s ISO Bootable UDF I Destination Device HL-DT-ST DVD-RAM GSA-H N E ATA I Destination Media Type DVD R Disc ID MBIPG -R - Speeds x x x x I Destination Media Sectors I Write Mode DVD I Write Type DAO I Write Speed MAX I DVD R Reserve Track No I Link Size Auto I Test Mode No I OPC No I BURN-Proof Enabled I Book Type Setting DVD-ROM I Filling Buffer MB I Writing LeadIn I Writing Session of Track LBA - I Writing Track of MODE LBA - W Failed to Write Sectors - - Reason Spindle Servo Failure W Retrying of W Retry Failed - Reason No Seek Complete W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write W Retrying of W Retry Failed - Reason Invalid Address For Write E Failed to Write Sectors - - Reason Spindle Servo Failure E Next Writable Address I Synchronising Cache W User opted to skip the Close Track Session Disc functions E Failed to Write Image I Exporting Graph Data I Graph Data File D Documents and Settings Senan Application Data ImgBurn Graph Data Files HL-DT-ST DVD-RAM GSA-H N THURSDAY-JANUARY- - - PM MBIPG -R - MAX ibg I Export Successfully Completed E Operation Failed - Duration I Average Write Rate KB s x - Maximum Write Rate KB s x nbsp

A:DVD burning problem

Burners wear out... Try another optical drive
 

http://www.techspot.com/community/topics/dvd-burning-problem.120731/
Relevancy 39.56%

Dear all, hope that someone can help me out here.

I've burnt some Word document and some JPG files onto a CDR. When I use explorer to view the files, I can see all the file with all the correct icons. However, when I double click the files, e.g. Word doc, Word application opens up but it couldn't open the actual file. It says the it is an Unknown file format. Same applies to the JPG files. The weird thing is I can open JPG files in one of the folder I burnt.

Please help. Appreciate it very much. Thanks
 

A:CD Burning problem

Have you by any chance burned links to files instead of the files themselves?

Check the file sizes on your CD against the real files on your computer.
 

http://www.techspot.com/community/topics/cd-burning-problem.19635/
Relevancy 39.56%

Hi guys

i got a question.
my computer is capable of reading DVD's and Cd's and i have also burned normal CD's with it,does that mean that i can burn DVD's too? like data DVD's?
what program can i use?
 

Relevancy 39.56%

I have 2 optical drives
1. LITE-ON's DVD R/RW SOHW-1633S
2. LG's HL-DT-ST DVDRAM GSA-H10L

When I try to burn data files to a DVD+R DL, I do get a progress bar & info, but halfway through the 'burn' stops & exits. Nothing gets burned & the disc is still usable. This happens when using either drive.

Wondering if the drives only take certain types of DVD+R DL media. I am using a Memorex disc (don't usually use Memorex, but it's what I have right now) & trying to burn using 7 Pro 64Bit's own burn utility.

Though that is not the problem at the moment. What I'd like to solve is this:
Since the files did not burn, how do I get rid of the small yellow lock that is now showing on them? I now have some info I need to add to a few of these files, but can I w/the lock in place?

A:Burning problem

What program do you use for burn Nero7?

http://www.sevenforums.com/general-discussion/168316-burning-problem.html
Relevancy 39.56%

I am running a AMD Athlon XP 1700+ with 256MB (I think maybe 512MB) of Ram with Windows 2000. I put a TDK 241040B CD-RW drive in my newly built one and it has problems. Everytime I want to burn a disc with Nero or any other program (I use Nero now) I have to wait til it asks for a disc then after I insert a disc it trys to read it and about after a minute is pops out and asks for a blank disc. I have to put a disc in 6 times at least for it to accept it and start to burn. Any Help?
 

A:TDK Burning Problem

You may have either a dirty drive, or a defective one. It may also be a media compatibility issue, have you tried different brands/types of media?
 

https://forums.techguy.org/threads/tdk-burning-problem.263757/
Relevancy 39.56%

Has anyone encountered this problem. My CD-Reader is configured on the second channel as the MASTER. My CD-Burner is configred on the second channel as the SLAVE. I just purchased these two units yesterday and installaled NERO software. Everything seems to be working fine. Here's the problem - when I copy a Music or Audio CD, the copy plays back and sounds like Ch - Ch - Ch - Ch.....I am using 32X Blank CDs for copies and am copying at writing at 24X....the unit can write at 48X and the reader can go 56X. Thanks for any suggestions....
 

A:Cd Burning Problem

are you doing a disk image, with both devices on the same channel the ide bus is pretty busy. Although it will usually result in an error.

a disk image is where the source cd is copied to the hard drive first, then burned from hard drive to burner rather than an on the fly burn where is is transferring data between the two units at the same time.
 

https://forums.techguy.org/threads/cd-burning-problem.98598/
Relevancy 39.56%

I am having a problem burning CD's, I use Sonic Record Now, it asks for audio disc to be inserted for copying, I insert a disk, and the tray opens, and asks for audio disk to be inserted, this keeps happening. I have never had a problem before, and I have not installed any software or hardware recently. Running Windows XP Pro with SP2. I have uninstalled Nero as I have heard this can cause conflicts, but still have same problem. Thanks for any help.
 

Relevancy 39.56%

So I have a .iso file I'd like to put on DVD. I tried Nero, first go around i didnt un-check the verify file content, so once it was done burning it just sat at 0% of "verifying file components". I aborted the the burn and started over again. This time the burn only took 20 minutes and when I ejected the DVD-R from my drive i could see the movie was BURNT into the DVD. I tried poppin it in my multiple DVD players and it was unreadable. I've just tried the burn again with nero and as it was on the final stage of "writing disc" I got a Blue screen physical memory dump crash :/. I'm probably going to give it another go, does anyone know why this is happening?
 

Relevancy 39.56%

I burned a couple of AVI clips using Ashampoo to cd. When I played them back using Media Classic the system hung up. Got a error message "Explorer encounted a problem" explorer restarted. Tried viewing with Irfranview same thing hapened. Next I tried using Windows Media Player, I was able to view the clips.I've been able to view all movies, clips, videos, etc with Media Classic. The codecs are the latest for the Media classic.
When I burned the clips did a straight "copy files/folder" to cd. When I check the properties of the copied clips its the same as the original clips.
Is it something I'm doing wrong?
 

https://forums.techguy.org/threads/burning-problem.798105/
Relevancy 39.56%

My DVD burner doesn't seem to want to burn any DVD correctly. I'm using Nero 8 and I burn files and it says that the burning was complete, but when I try to play the files on my DVD player, the movie stops half way through and it's not burned completely. So does anyone know if it's Nero that's not working correctly or my DVD burner?
 

https://forums.techguy.org/threads/burning-problem.648683/
Relevancy 39.56%

Hi Guy's im having problems trying to burn DVD's and CD's, its wierd because my DVD and CD Drive both read the blank disk's but when i go to burn something in Nero (or any other Burning App Ive got) In Nero the speed is just graded out to x2 speed and i cannot change it, and sometime's there is no speed there @ all its jst a graded out box? but if i click burn when it is locked on x2 it just says plz insert a blank DVD so i do and nothing happen's, has any1 got any idea's? if you want me to post a screenshot if it will help, i will
 

Relevancy 39.56%

Burning DVD-R W problem The following problem is driving me almost mad Some help would be appreciated I ve faced many many ridiculous problems with the render process of Pinnacle One of the suggestions I ve read on the Pinnacle forum was to defragment my harddisk to optimize Although there was plenty of free space on my hard disk I decided to buy another one Mb and I performed the defragmation action many times Four heart attacking weeks later I managed to produce a burnable image of the movie Gb Again Mr Murphey and Ms Hell decided to return to my PC and disturbed the burning process My DVD-burner Toshiba SD-R refused to burn Burning DVD-R(W) problem any DVD from any brand of any type write once DVD-R(W) Burning problem or rewritable However writing a CD works fine no problem I didn t try the rewritable but I don t expect a problem Reading DVD s is also no problem at all My last succesfull DVD-burning was on the september two weeks after installing the additional disc Other information DVD brands MMore DVD-RW unused to check the quality two of them were successfully burned on another PC and were readable on my PC but inerasable MMore DVD-R DVD-R(W) Burning problem I always used the MMore without any problem Maxell DVD-R TDK DVD-R all error message disc not empty and Philips DVD RW just to sure DVD Shrink Message The R W disc is not empty do you want to erase it However all output files were successfully encoded and they are ready for burning with appropriate DVD burning software Ulead DVD MovieFactory SE Message The disc is not empty neither there is no disc in the device Insert an empy disc and try again Pinnacle and and Trying to burn a seconds short movie which was burned successfully in the past Message The RW-disc has to be erased before burning Do you want to erase the disc Yes I want After a few seconds the second message appears A fatal and unknown error has occurred InstantWrite DVD-RW format Initiated by a right mouseclick in the explorer For a quick format as well as a full format the error message is the same An error occurred while formatting the medium Other useless attempts Checking if cable new harddrive is on the same IDE as the DVD no Detach new harddrive no result Checking ASPI drivers at first sight no problem but I m not familiar with this stuff Uninstall NERO reboot check register with JV Powertools and reinstall several times Checking for new firmware for the Toshiba there was an update but this was concerning the regiocode I decided to ignore the new version Talk to the PC and threaten the stupid device with hell and rubbish dump Nero Express Message the disc is not rewritable and therefore cannot be erased Please insert a rewritable disc Disc information the disc is empty with in the heading a strange remark blanc read only CD instead of DVD A quick erase and a full erase didn t have any positive result Some details from the NERO logfile Text File DlgWaitCD cpp Line gt gt gt Protocol of DlgWaitCD activities lt lt lt Insert the disc to write to Medium in drive DVD-RW Medium required by compilation DVD-R RW This disc is not empty Medium in drive DVD-RW Medium required by compilation DVD-R RW VMS Disc erase failed Accessing disc Medium in drive DVD-RW Medium required by compilation DVD-R RW Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE CTransferItem indices index not provided original disc pos relocatable disc pos for caching writing not required required no patch infos - gt TRM DATA MODE config wanted index blocks length blocks TOSHIBA DVD-ROM SD-R Text File ThreadedTransferInterface cpp Line Prepare recorder TOSHIBA DVD-ROM SD-R for write in CUE-sheet-DAO DAO infos MCN quot quot TOCType x Session Closed disc not fixated Tracks to TRM DATA MODE x FilePos ISRC quot quot DAO layout Start Track Idx RecDep CtrlAdr lead-in x x x x x x lead-out x x Phase File dlgbrnst cpp Line Caching of files started Text File Burncd cpp Line Cache writing successful Phase ... Read more

A:DVD-R(W) Burning problem

Make sure DMA is enabled on the drive by checking the drives properties in device manager.
Try installing forceaspi. http://radified.com/ASPI/forceaspi.htm

If it still won't work, update the drives firmware..
 

https://forums.techguy.org/threads/dvd-r-w-burning-problem.276521/
Relevancy 39.56%

I have a group of mp3's, (all acquired from the same source), that are causing me a problem when I go to burn them onto an audio CD. I don't have a problem burning any other mp3's.

The mp3's in question all play fine on the computer. I used winamp to convert them to wav and again they all play fine on the computer. Then when I start my burning software I'm getting an error message "not enough room on cd". I know that the cummulative size of these wav files is well under 700 megs. What might be unique about these files?

Any suggestions would be greatly appreciated.

bb
 

Relevancy 39.56%

I have a Sony VAIO desktop, model VGC-RB30. My internal DVD burner seems to burn dvds fine, that is - until i watch the burnt discs. There seems to be some type of writing problem, because when I watch the discs the picture will pixilate or the DVD will skip every 60 seconds. I've tried almost everything to fix the problem, and Sony's tech support hasn't gotten me any closer to a solution. I was told to change one of the primary IDE channels on the drive from "DMA if available" to "PIO Only" and i didn't notice any difference - I've wasted tons of blank discs testing it, and still getting the same result. Can anyone help me with this?
 

Relevancy 39.56%

Whenever I try to burn a cd it says; Cannot complete the CD Writing Wizard. There was an error in the writing process. The disc you have attempted to write "may no longer be usable" ?

Or, it says; This CD "does not have enough free space for the files". This happens when the file I am trying to burn is relatively small and the CD has never been used before.

I a little confused with what is happening here. Please help!!!

A:Problem With Burning Cds

In order to be of any assistence please supply us following info :

1) Operating system (Windows?XP?Home?)
2) Which program(s) do you use for burning?
3) Type and make of Writer
4) Firmware version/Drivers
5) Which types of writable CD's you use?

http://www.bleepingcomputer.com/forums/t/74219/problem-with-burning-cds/
Relevancy 39.56%

What Is The Best Software For Burning A Dvd That Comes On Two Seperate Discs To One Dvd Disk, I Have Tried Nero But It Keeps Telling Me Not Enough Space On Blank Dvd Even If I Set The Setting Auto Fit To Disk Can Anyone Help Or Suggest Another Software Program
 

A:Burning Problem

very tricky this it depends on the size and compression of whats on the discs and what distortion you may suffer by trying to merg the 2 together,if the total is less than a dvd say 4.6 gb then it should be possible but not without its problems,what you maybe could try is to filter the discs of any rubbish you do not want to decrease their size then burn if size is compatable with a standard dvd disc,try dvd shrink but i doubt it will work
http://www.mrbass.org/dvdshrink/ this is for shrinking not copying as is illegal
 

https://forums.techguy.org/threads/burning-problem.534591/
Relevancy 39.56%

i had a problem over xmas where a DVD took min to burn no matter what i set the burner sepeed to Burning DVD Problem x - x was all min the diskes i use will burn in those randges so they DVD Burning Problem should be fine i solved this problem though by formating the pc and it worked the problem has come back again and is happening the same way Nero s wright buffer i think it is the one at the bottom of the burn window is switching imbertween - and ranges between continuously the dvd work after they burn with no problems but it is starting to anoy me with it taking min to make DVD Burning Problem the dvd drive is a artech x dvd - drive windows shows it as VOM- E X the data i was trying to burn ranged from gb- gb and still took min my pc specks are inter p ghz gb ram gb hdd VOM- E X on seperate IDE any help apriciated btw i thought it was spyware or somthing similar so iv run removal tools and gotten rid of all i could fined and also gon to safe mode to remove stuff i knew shouldent be on my hhd programs with names like xyyydfr exe nbsp

A:DVD Burning Problem

Check the transfer mode of the drive.

Go to Control Panel -> System -> Hardware -> Device Manager and expand the IDE ATA/ATAPI CONTROLLERS and check the properties of the Controller. Check the transfer mode of the each of the devices. All the drive should be running in DMA mode ranging from DMA 6 for hard drives to DMA 2 for Optical Drives. If any drive is in PIO mode then thats likely the problem, with PIO you would be limited to very slow speeds.

Also, make sure you Nero and InCD are fully up-to-date: http://www.nero.com/us/Updates.html

Also download Hijacthis: http://www.tomcoyote.org/hjt/
Save it and Extract it into its own folder so it can save backups if they happen to be needed. Then run it and choose to do the scan and save log option. Copy and Paste the results of that log into a post. If the system is being taxed by something else its not gonna be able to transfer as fast.

Also defrag the hard drive.
 

https://forums.techguy.org/threads/dvd-burning-problem.325423/
Relevancy 39.56%

I have a dell inspiron laptop that came with Sonic DVD and CD Burner on it When I attempt to add a video file into the burn window it gives me a message saying that it quot is not able to create a thumbnail quot thus leaving it unable to burn the dvd Ive downloaded several other freeware dvd burners that will allow me to add a video file and burn the dvd but when it is finished burning and yes it says that it has finished burning successfully it is visually apparent that the dvd has very little written on it just a small ring around the center and it will not play anything in a dvd player I have problem Burning DVD been surfing the net for weeks looking for a solution to this problem I wonder could my burner hardward just be broken for some odd reason Do I have to purchase a new burner to install on my lap top Or can this be fixed some DVD Burning problem other way I sincerely appreciate anyone who takes the time to read and hopefully give me some suggestions nbsp

A:DVD Burning problem

Burners seldom last longer than a year. Optical drives are likely to go out quickly if used a lot. I suspect, however, that the problem is with your burner software. Remove the software in your Add or Remove Programs section, then reboot and reinstall... or switch to Nero 7.0.
Be sure you have scanned your computer for viruses, spyware, rootkits, and the like.
 

http://www.techspot.com/community/topics/dvd-burning-problem.76753/
Relevancy 39.56%

I installed Khypermedia CDRW Drive X X CD with Burning Problem X as recommended in quick installation guide from the box The jumper on the drive is set to MASTER as recommended and the distal Problem with CD Burning end of the IDE ribbon cord is attached to it The CD-ROM which was master before has been made slave with the center of the IDE ribbon cord attached to it The problem with the CDRW is that When making a music cd it completes the burning completely and smoothly BUT When I play that CD in any of the home or Car audio player let s say the cd has tracks all the tracks play very well but when the last track ends it does not go back to the st track and start playing the cd from the st track I have to manually press the seek bar on the audio to go to the st track I tried different brand cds and all had the same burning defect I burned the cds with Nero and Roxio and the result was same Specifications eMachines MHz Intel Celeron Win XP Pro mb RAM GB Hard Drive Previously I had Verbatim CD RW X and had no problem burning the CDs I burned the same tracks on a different computer that I have and the burned CD was perfect that is from track it goes to track automatically Please suggest to rectify the problem Thanks nbsp

Relevancy 39.56%

Hi, recently I have been burning DVD's to DVD-R and everything is fine, but when I try to burn a CD, either music or data files it won't let me do it. Windows media player kicks the disc out asking to try a different sort of disk, Have tried using a different make of CD-R but still same problem. Upon using Nero to burn the CD it freezes on 6% everytime, but like I say, if I do a DVD I don't have one problem. I have also tried using a totally different DVD/CD burner and the same happens.

Any ideas?

Many thanks
 

A:DVD/CD burning problem

XP Media Center? Have you installed or deleted anything recently that may have caused this problem. Is your virus and malware protection up to date?
 

http://www.techspot.com/community/topics/dvd-cd-burning-problem.122778/
Relevancy 39.56%

Hi Im having aproblem burning CR-R on my PIONEER DVD RW DVR- D Its burning DVD-R no problem I have tried it with both Nero and Roxio with the same result This is the error CD-R Problem burning log from nero any suggestions are most welcome as im totally stumped Windows IA WinAspi - ahead WinASPI File E Program Files Ahead nero Wnaspi dll Ver size bytes created Nero version Recorder lt PIONEER DVD RW DVR- D gt Version - HA TA - Adapter driver lt atapi gt HA Drive buffer kB Bus Type default - gt ATAPI detected ATAPI CD-ROM lt PIONEER DVD RW DVR- D gt Version - HA TA - Adapter driver lt atapi gt HA Scsi-Device-Map DiskPeripheral Maxtor Y P atapi Port ID DMA On CdRomPeripheral JLMS XJ-HD H atapi Port ID DMA On CdRomPeripheral PIONEER DVD RW DVR- D atapi Port ID DMA On DiskPeripheral Maxtor H atapi Port ID DMA On CDRom-Device-Map JLMS XJ-HD H N CDRom PIONEER DVD RW DVR- D O CDRom AutoRun Excluded drive IDs WriteBufferSize Byte ShowDrvBufStat BUFE Physical memory MB Problem burning CD-R kB Free physical memory MB kB Memory in use Uncached PFiles x Use Static Write Speed Table Use Inquiry Global Bus Type default Check supported media Disabled CD-ROM ISO Text File Isodoc cpp Line Iso document burn settings ------------------------------------------ Determine maximum speed FALSE Simulate FALSE Write TRUE Finalize CD TRUE Multisession FALSE Burning mode TAO Mode ISO Level Max of chars Character set ISO Joliet TRUE Allow pathdepth more than directories FALSE Allow more than characters in path FALSE Write ISO file extensions TRUE Phase File dlgbrnst cpp Line Buffer Underrun Protection activated Text File Reader cpp Line Reader running Text File Writer cpp Line Writer PIONEER DVD RW DVR- D running ISO GEN - File geniso cpp Line First writeable address x Text File Burncd cpp Line Turn on Track-at-once using CD-R RW media Text File DlgWaitCD cpp Line Last possible write address on media Last address to be written Text File DlgWaitCD cpp Line Write in overburning mode NO enabled CD Text File DlgWaitCD cpp Line Recorder PIONEER DVD RW DVR- D CDR code OSJ entry from TDK Corporation ATIP Data Special Info hex D A F LI B LO Additional Info hex FF FF FF invalid FF FF FF invalid FF FF FF invalid Text File DlgWaitCD cpp Line gt gt gt Protocol of DlgWaitCD activities lt lt lt Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE CTransferItem indices index not provided original disc pos relocatable disc pos for caching writing not required required no patch infos - gt TRM DATA MODE config wanted index blocks length blocks PIONEER DVD RW DVR- D -------------------------------------------------------------- Text File ThreadedTransferInterface cpp Line Prepare recorder PIONEER DVD RW DVR- D for write in TAO DAO infos MCN quot quot TOCType x Session Closed disc fixated Tracks to TRM DATA MODE x FilePos ISRC quot quot DAO layout Start Track Idx RecDep CtrlAdr - lead-in x x - x x x x lead-out x x Text File ThreadedTransferInterface cpp Line Removed run-out blocks from end of track Length - gt Phase File dlgbrnst cpp Line Caching of files started Text File Burncd cpp Line Cache writing successful Phase File dlgbrnst cpp Line Caching of files completed Phase File dlgbrnst cpp Line Burn process started at x KB s Text File ThreadedTransferInterface cpp Line Verifying disc position of item relocatable disc pos no patch infos orig at write at Text File Mmc cpp Line Set BUFE supported - gt ON Text File Cdrdrv cpp Line - PIONEER DVD RW DVR- D H T Queue again later SCSI - File Cdrdrv cpp Line SCSI Exec HA TA LUN buffer x D Status x x SCSI ERR HA-Status x x OK TA-Status x x SCSI TASTATUS CHKCOND Sense Key x KEY MEDIUM ERROR Sense Code x Sense Qual x CDB Data x A x x x x xA x x x x x x Sense Data x x x x x x C x x E x x x x x x CDR - File Writer cpp Line Power calibration error Text File ThreadedTransfer cpp Line all writers idle stopping conversion Text File ThreadedTransfer cpp Line conversion idle stopping reader CDR - F... Read more

Relevancy 39.56%

I did do a burn once with my computer a new one bought on labeled as a Data Disc that only works on my PS wo which I have no problem at Burning Problem all It was one disc with three movies around MB a piece But now wanting Problem Burning to something on the same type and brand of discs I used before not reusing the same one just using more from the pile I can t seem to Problem Burning burn anything right And after non-rewritable DVDs wasted I need help I have the following Nero Windows DVD Maker and DVDVideoSoft I used one of them to do the first burn now Problem Burning none of them seem to be working though because it wants to be set in minutes and nothing I can do to change that DVD Maker is out of the question The only thing is that when I put those bad discs in anything on there said they were unsupported and that goes for both the PS and a regular DVD player They play fine on the computer so what seems to be wrong I need help please nbsp

https://forums.techguy.org/threads/problem-burning.897538/
Relevancy 39.56%

I am honestly not sure if this should go here...but I have a friend who has a dell computer with XP home edition installed. When she burns a cd of music (using nero 6) the cd is not recognized after the burn is complete. I burned a music cd on her machine and immediately played it in the machine (using musicmatch). Then I played the same cd on my computer using winamp. When I tried to play it in her computer it would not recognize the cd. Kept saying "Please insert cd". I then went and installed winamp on her machine and was able to play it. But she cannot play the cd in her car. Anyone got any ideas? Thanks
 

A:Problem burning a cd

First off make sure it is not a RW CD. Also there could be a problem with the burner. If it is the only CD ROM device onthe computer it should assuming that the computer uses (IDE) be on the secondary IDE channel and be the master device rather then slave. THis is assuming that you are dealing with one hard drive and one CD R ROM DRIVE.
 

https://forums.techguy.org/threads/problem-burning-a-cd.218080/
Relevancy 39.56%

I have Nero, Alcohol 120% and Clone CD. When I try to burn a cd my drive sounds like it is spinning up, but when i run Clone CD it says its at .3 kbs for like 1 sec then it goes to 0.00 and it just sits there. I have tried only having one of each of these installed at one time, but it still didnt work. Once in a while like 1 out of 30 a cd will actually burn. Any help would be appreciated.
P.S. I have burned cd's in the past with no problem.
 

https://forums.techguy.org/threads/cd-burning-problem.218555/
Relevancy 39.56%

I have been using Nero 5.50 to burn CDs. Just recently I have been getting errors stating, both cds on same IDE cable created errors. I moved CD-rom as slave second drive with HDD, master on CD-rw, by itself. Upgraded Nero to 5.5.1, now when I try to burn a CD I get ATAP1 command timeout error. What or where did I go wrong?
 

Relevancy 39.56%

Hello.
I am trying to burn a music CD with WMP 11. In the past it has always worked OK. Recently though I keep getting and error message that the CD was not able to be burned properly, and that I should set the burn speed lower. However the burn speed is already set to the lowest possible speed! The error code is C00D117E
 

Relevancy 39.56%

I cannot burn a CD. The CD Writing Wizard goes through all the normal functions, but when it's ready to burn, it seems to seems to skip the step. When the wizard finishes (CD does not burn), it says, "There was an error in the writing process. The disc you have attempted to write may no longer be usable." I have tried using different discs; I was even able to erase a CD-RW. I looked at Microsoft's knowledge base for answers, and the things I have tried have not worked. Does anyone have any ideas?

Eagle Eyes

A:CD Burning Problem

Go to start, run and type services.msc and enter.

Look down the list for imapi cd burning and make sure it says started next to it. If not , double click it and click start. Also set startup type to automatic.

http://www.techsupportforum.com/forums/f10/cd-burning-problem-62809.html
Relevancy 39.56%

hello folks.for me is posible burn data cds but when i try burn audio cds the process failed.what is the mistake?thanks for the attention
 

A:problem burning my cds

What error do you get? Also it would be good to know what version of Windows you have and what CD burning program you are using. Also has it ever worked or is this a new drive?
 

https://forums.techguy.org/threads/problem-burning-my-cds.303449/
Relevancy 39.56%

I'm having problems in burning files to a CD, I tried 2 burn programs, Burnaware Free and Useful Utils Disc Studio. Both programs showed burning processes to be successful but both became " not responding" upon verification of the data burned.

I would welcome any suggestions, I'm using XP Pro with SP3, have an Acer laptop with DVD Super Multi DL drive, Intel Core- Duo T5250 with I GB RAM.

Thanks!
 

https://forums.techguy.org/threads/problem-with-burning-cds.860686/
Relevancy 39.56%

I'm not sure if this is the right area to post the problem as i dont know if it's a hardware or software problem any how, my friend has a dell Dimension 4550 P4 2.6 and a Samsung 48X DVD/CD combo not sure what model number it is, tho i will try and get it.

he is trying to burn audio CD's to play in standard cd players, the problem is the first 2-3 tracks that are burned play fine but after that the rest dont, he's tried buring using MS player V9, and tried burning using different audio qualities but the same thing happens, anyone got any ideas on what the problem might be.
 

A:CD burning problem

Try burning at a lower speed. If you are burning at max speed, many CD players can't read part or all of the discs. I never burn audio CDs at more than 12x.
 

http://www.techspot.com/community/topics/cd-burning-problem.11636/
Relevancy 39.56%

Hi i have had a problem for a while now Whenever i trie to burn a cd i will get all the way to the burning part then it will just Problem Burning CD stop It shows that the hardware is selected which is good It stopped working around the CD Burning Problem time that i had to switch my main drive stopped working i went out and bought a new one and installed it i was told to mess around with the CD Burning Problem slave and master settings in the back i think that has something to do with it The error message is Windows Media Player cannot burn the files to the CD Verify that the disc is clean and not damaged If necessary select a slower recording speed or try a different brand of blank discs I have tried different disks they work on my dads computer I have moved to speed down as far as it goes still get same error I have windows Xp service pack i have most of the updates thanks nbsp

Relevancy 39.56%

hello....i am having a problem burning cds....everytime i try and brun a cd it tells me to insert a blank cd...i use nero smartstart as my cd/dvd burning..it is a lightscribe cd/dvd rw player...do i need the lightscribe cd rw to put music on there or should any any cd rw work...the cd player does play music from brunt cds it just wont burn them....i downloaded the cd that came with the cd player and i did all that i needed to.
 

A:CD burning problem.

Have you tried other CD burning applications?
 

http://www.techspot.com/community/topics/cd-burning-problem.70861/
Relevancy 39.56%

Recently I have had a new internal dvd rw installed.

I have win xp pro sp2, windows media player and nero 8.

System shows pioneer dvd-rw dvr-115d but wmp and nero only see the drive as a cd player.

I have ungraded the firmware from pioneer, tried updating nero, and removed nero completely but to no avail. I have also reverted to wmp 10.

Can anyone give help me?

A:problem burning dvd's

hi, i had this problem and i could not solve it so i purchased an external dvd-RAM writer. thing is because mine was combo drive. what cd formats are you using and when you insert is does it detect or do you get a flashing light on cd etc.

the only thing i could think of at the momeny is go to start then run and type
devmgmt.msc
then go and find the driver click on uninstall reboot pc then again go to run and type devmgmt.msc and this time click on scan for hardware changes that might solve it.
oe phone the company and tell them about this problem.

http://www.techsupportforum.com/forums/f10/problem-burning-dvds-242149.html
Relevancy 39.56%

My burner's been acting up lately.

Every time I burn a cd the buffer never stays full. Keeps going up to 100% and back down to 0% again.
The cd's end up burning ok because of the burn proof feature but it takes a lot longer to burn the cd.

My system also slows right down as well and returns to normal once the cd is finished.

It burns the cd's the same way no matter what software I use.

My burner is a plextor 16/10/40A (system specs win xp, 512 sdr ram, 1.33 Athlon)

Is it toast?


win xp
512 sdr ram
1.33 Athlon
 

Relevancy 39.56%

hello all,

I am having problems burning .avi files to DVD-R, i am using Burn4Free and have used it previously with no problems. The program runs and goes through the motions of burning the data, but when it finalizes the disc it hangs and seems to spin the disc in the drive indefiintely. On occasion when it completes the process, the disc doesn't show any data on it on this or another computer
The program will burn to CD

I am using a Compaq Presario V2000 with XP SP2 and the drive is TSSTcorp CD/DVDRW TS-L532 - [FW HA04] - [ATAPI]

the discs i'm using are Verbatim DVD-R

I have uninstalled and re-installed the driver but still no luck, any more advice would be greatfully received

cheers
 

Relevancy 39.56%

ok folks here's my problem. over the last few month's i have created a large album of music and video clips which i have stored on my hard drive. Most have been obtained through ligitimate sources pay sites cd's i have purchased or borrowed from freinds and so on but some have come from other sources (download sites); problem is i cannot burn anything and i cannot tell the difference between a good copy and an illegal one. Is there any program out there which will allow me to identify those which i can keep? (trust me when i say i have had enough of the free stuff "to many problems" i just don't want to dealeat everything and start fresh.
i am using roxio easy cd and dvd creator 6
any help would be appreciated
 

A:problem burning cd's/dvd's

just a side note cannot burn anything to a dvd yet i have the proper dvd's they are being recogmized by the computer. is theire a setting i am missing???
 

https://forums.techguy.org/threads/problem-burning-cds-dvds.447410/
Relevancy 39.56%

Two nights ago I tried burning a CD using musicmatch and my external burn drive Never had a problem before This time the burn got to about and then froze--the CD kept spinning but the burn failed Tried this or more times with different mp files same problem Reinstalled musicmatch same problem Tried the internal burn drive same problem Tried Nero instead of musicmatch same problem--the burn got to about Did a virus scan in safe mode and only came up with a couple spyware Restored my saved registry and multimedia setup and everything seemed to be okay for two burns Now I m experiencing the same problem Always freezes at I m now at a loss as to Burning CD Problem what to do Using Windows Please help P S I should add Last month I tried CD Burning Problem to backup with my system with Sonic Simple Backup using my external burn drive and DVDs Everything got off to a good start but the backup froze at an early point I tried several times and followed Sonic s suggestions for resolving the problem but eventually gave up nbsp

A:CD Burning Problem

Problem could be due to low disk space, or memory.
 

https://forums.techguy.org/threads/cd-burning-problem.400834/
Relevancy 39.56%

Problem burning CD's, DVD's Etc. I don't know if this is a windows problem or a Nero problem but about a week ago I started having problems burning CD's and DVD's. I've got a about 25 screwed up ones.
I've got XP Pro and Nero 6 with all the updates.
Both windows and nero spit the cd or dvd out after trying to burn about 1/2 way through.
 

A:Problem burning CD's, DVD's Etc.

Hi

Have you tried reinstalling the nero software? If not, give it a go, as reinstalling can resolve many burning problems.

Dave
 

https://forums.techguy.org/threads/problem-burning-cds-dvds-etc.319951/
Relevancy 39.56%

Hi this is my first post so please be kind i have just bought an Acer Aspire 9300 with a Slimtype DVDRW SSM-8515S ATA Device. When i put in a disk it reads the contents perfectly however when i put in blank discs whether cds or dvds it doesnt read them. However when i checked in Device Manager under properties the computer only seems to recognise the drive as ROM. Is there anyway i can turn on the recording facility to the drive?
 

https://forums.techguy.org/threads/burning-problem.732445/
Relevancy 39.56%

I tried burning and audio cd with Nero and it will get about 75% complete and then the burn process will abort. I thought it was a problem with Nero, then I tried with RealPlayer and it did the same thing. I have not had a problem burning cd's or dvd's until yesterday. Sure need some help.

Windows XP
28 gig. Hard Drive
1.4 gig proccessor
320 MB ram
 

A:Cd Burning Problem

If you've tried different media, have you tried blowing the dust out of the CD drive? If it dies at about the same place, it would appear it might be a mechanical issue with the drive...
 

https://forums.techguy.org/threads/cd-burning-problem.418102/
Relevancy 39.56%

I have been burning and ripping DVD s using my quot LG GSA-H N quot drive For the first few months of this year it has been burning perfectly with DVD DVD Shrink Nero Express but Problem Burning DVD in the last few months it doesn twork with anything I get heaps of errors I have tried DVD Decrypter AnyDVD etc but I always get errors I have mixed software I use and every time I get errors I have uninstall and reinstalled various softwares a number of time Some error messages I get are quot Invalid DVD navigation structure quot quot I O quot quot Pure virtual function call quot quot Data error cyclic redundancy check quot My computer froze for a while and I got it fixed then got it back and it DVD Burning Problem worked perfectly for a little while then suddenly stopped working and the errors came I have tried heaps of google searches and read forums and tried to find a patch but I don t understand anything I have found I left out that the drive doesn t seem to load protected DVD s and when it does it takes a long time Also I DVD Burning Problem am unemployed so I can t buy anything unless I can be sure that it works and it doesn t cost much So I am relying on freeware I have updated the drive successfully DVD Burning Problem from to and it still doesn t work So can anyone help me with a patch Does it need something to do with ASPI or RPC these came up in error messages and if so can anyone provide me with a link for Freeware I am getting really annoyed and losing my patience I am running Vista so can anybody help me please nbsp

A:DVD Burning Problem

Questions of this nature are not allowed at this forum.
 

https://forums.techguy.org/threads/dvd-burning-problem.714902/
Relevancy 39.56%

I have a Hewlett Packard CD writer cd4e series and it is only accustomed for up to Windows Me. I tried to download something at the Packard site to help with defining it for Windows XP, which I have on my pc. Now my cd writer is telling me there is a script error and the writer won't come up. I also have a Nero thing on my computer but do I need to use a writer for this process. I had it installed and don't even know how to use it! :{ I thank you for help in advance.
 

A:cd burning problem

When you say
"but do I need to use a writer for this process"
What process are you refering to? The recognition of the drive? It's an external USB drive, is that correct? When you plug it in, does it show up in control panel? Have you installed the 'something' you downloaded from the HP site?
 

https://forums.techguy.org/threads/cd-burning-problem.422715/
Relevancy 39.56%

Hi Everyone,

Would someone please tell me how I can burn an mp3 cd with the songs in the order I want them? I tried setting up a playlist in Musicmatch Jukebox and burning it from within that program, but after doing so, I noticed it put all the tracks in alphabetical order.

Is there a way around this? Thanks.

John
 

Relevancy 39.56%

Not sure if this is the right place to post this but here goes Two nights ago I tried burning Problem Burning CD a CD using musicmatch CD Burning Problem and my external burn drive CD Burning Problem Never had a problem before This time the burn got to about and then froze--the CD kept spinning but the burn failed Tried this or more times with different mp files same problem Reinstalled musicmatch same problem Tried the internal burn drive same problem Tried Nero instead of musicmatch same problem--the burn got to about Did a virus scan in safe mode and only came up with a couple spyware Restored my saved registry and multimedia setup and everything seemed to be okay for two burns Now I m experiencing the same problem Always freezes at I m now at a loss as to what to do Using Windows Please help P S I should add Last month I tried to backup with my system with Sonic Simple Backup using my external burn drive and DVDs Everything got off to a good start but the backup froze at an early point I tried several times and followed Sonic s suggestions for resolving the problem but eventually gave up nbsp

A:CD Burning Problem

Drive problem

It seems your CD-RW drive is the problem. I have a CD-RW/DVD Combo drive. But now i can only read CDs; no DVD's or CD burnings. If the drive is the problem, the best hope you have is updating the firmware of the drive (you can go to the manufacturer's website for details), or else you have to trash your drive and buy a new one
 

http://www.techspot.com/community/topics/cd-burning-problem.33578/
Relevancy 39.56%

I have a Pioneer DVR-108 burner. The firmware is up to date. But it will not recognize a Memorex 16X DVD blank. Is there anything I can do or am I out of luck? Thanks for the help.
 

A:DVD Burning Problem

Try another brand of disc. Has it worked for you at all yet? Does it read discs ok? What burning software do you use? Is it the only re-writable drive you have in the computer?
 

https://forums.techguy.org/threads/dvd-burning-problem.434418/
Relevancy 39.56%

Hello

yesterdy i noticed that i cant burn cds with my cd burner so i went to msconfig intto services and i saw that INAPI CD-burning software is turned off and some of the microsoft services are turned off also can someone please explain how do i turn them on again,i will apreciate your help thx.
 

A:CD Burning Problem need help!!!

Go into control panel, administrative tools, services, double click on the IMAPI CD-Burning Com Service, and set it to automatic. Start the service also with the start box in the same place. I prefer to reboot at this point just to make sure. See if you can burn now. I'm assuming you mean you can't burn with windows inbuilt burner as this service isn't needed for burning with other programmes such as nero.
You can turn other services on in the same place. You don't neccessarily need everything turned on. Different people on different computers have different needs. I am more interested in what can be turned off for example.
 

https://forums.techguy.org/threads/cd-burning-problem-need-help.498323/
Relevancy 39.56%

actually i can burn cd s but with this folder i burning cd Problem don t know why i can t burn it Nero says that i ve got two joliets or genisup same the fact is if i can identify the file i can do something about it so as to Problem burning cd make it burn but there is no information about it I need some help to get Problem burning cd through this Here i post Nero log i hope this ll help u priv - - - - - Windows ME IA WinAspi File Wnaspi dll Ver size Problem burning cd bytes created Nero Version Nero Express Recorder lt LITE-ON LTR- S gt Version QS C - HA TA - Adapter driver lt ESDI gt HA Drive buffer kB Bus Type default - gt ATAPI detected ATAPI CD-ROM lt HITACHI DVD-ROM GD- gt Version - HA TA - Adapter driver lt ESDI gt HA Bus Type default - gt ATAPI detected ATAPI HITACHI DVD-ROM GD- Target D Autoinsert On DMA On Disconnect SyncDataXfer LITE-ON LTR- S Target E Autoinsert On DMA On Disconnect SyncDataXfer Excluded drive IDs CmdQueuing CmdNotification WriteBufferSize Byte ShowDrvBufStat EraseSpeed BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Static Write Speed Table Use Inquiry Global Bus Type default Check supported media Enabled Wizard On CD-ROM ISO Text File Isodoc cpp Line Iso document burn settings ------------------------------------------ Determine maximum speed FALSE Simulate FALSE Write TRUE Finalize CD TRUE Multisession FALSE Burning mode TAO Mode ISO Level Max of char Character set ISO Joliet TRUE Allow pathdepth more than directories TRUE Allow more than characters in path TRUE Write ISO file extensions TRUE Phase File dlgbrnst cpp Line Buffer Underrun Protection activated Text File Reader cpp Line Reader running ISO GEN - File geniso cpp Line First writeable address x ISO GEN - File geniso cpp Line Joliet names of these files listed here in ISO-L are the same ISO GEN - File geniso cpp Line Preparation of ISO structures failed Text File Scsicmd cpp Line SCSI not using temporary buffers out of temporary buffers allocated Existing drivers File IoSubSys SCSI HLP VXD Ver size bytes created File IoSubsys NEROCD VXD Ver size bytes created File IoSubsys CDR VSD VXD Ver size bytes created File IoSubsys CDRALVSD VXD Ver size bytes created File IoSubsys ACBHLPR VXD Ver size bytes created File IoSubsys CDFS VXD Ver size bytes created File IoSubsys ESDI PDR Ver size bytes created File IoSubsys USBMPHLP PDR Ver size bytes created File System Drivers bus sys Ver size bytes created File System Drivers Ohci sys Ver size bytes created File System Drivers Sbp port sys Ver size bytes created File IoSubsys Disktsd vxd Ver size bytes created Registry Keys nbsp

Relevancy 39.56%

Hello all, Happy new year from Colombia.
 
I don't know if this is the correct thread. I'm having a problem with a movie I want to burn on a DVD for my collection. Every time I want to burn it the software don't accept it. I have converted from MP4 to AVI to Matroska to WMV and others and simply the burning software does not accept the movie for burning. I have used several software including V2D, CDBurnerXP, Imgburn Nero etc. all with the same result. The film can be successfully watched on my desk top. What to do? Thanks
EDUARDO

A:DVD burning problem

All media files could be burned to a regular DVD disc (up to 4 - 4.7 GB)provided you choose the Data Disc.  If you pertain to a DVD format, convert it first using this http://www.dvdflick.net/

http://www.bleepingcomputer.com/forums/t/519414/dvd-burning-problem/
Relevancy 39.56%

Was wondering, whenever i burn XP to a disc im assuming there is a problem cause while formatting, there always missing files like win2k.sys or some crap.

so wanted to know if theres some tips...

Ps; im on a mac
 

Relevancy 39.56%

I ve got an issue that I can t seem to figure out A while back I posted about this same issue but now it has gotten worse The issue started when I tried to burn an MP disc a couple of months ago Usually when I burn mp s to a CD I burn it is a data disc However I noticed that there was an option in NERO to make an MP disc When I chose the MP option and added my files to burn the burn process would hang around completion every time the access light on my writer would continue to flash and the only way to retrieve the now useless disc was to restart my machine to kill whatever processes were causing the hang The strange part was that the same files would burn just fine if I chose to make a CD Problem Burning data disc rather than the MP disc I chalked it up to a software bug and continued on since the data option worked for mp s and I wasn t having any trouble burning DVD CD Burning Problem s Last night I tried to burn another CD chose data disc like I normally do and the darn thing froze up at - same symptoms as before I had to kill the NERO window using Task Manager and the access light on the drive wouldn t stop flashing or allow me to eject the disc until after a reboot Okay I thought NERO was the issue so I fired up ROXIO to make the disc - AAARRRGGGHHH it locked up during the burn as well at completion Now I am really confused so I thought quot the heck with it quot and put the songs on my network folder went to my laptop and burned the disc using the ROXIO that came with my laptop The disc burned just fine but it also wouldn t let me eject the disc until after a reboot - I could hear the CD-R W drive spooling up then down then up then down pushing the eject button had no effect just like on the DVD-R W drive in my desktop This is the nd or rd time that I could not eject a disc after burning on the laptop even though the disc burned just fine I thought originally that maybe the drive was going bad but now the pieces are starting to come together I think My thought this morning was that the DVD writer in my desktop was going bad as well it was a cheapo - but I have no issues burning DVD s Long Breath - I know this is long winded but I m hoping someone can fill me in on what might be going on after reading this My thought now is possibly that since I have no issues with burning DVD-R s the CD-R discs are what is causing the issue not the drives or software I use Memorex mb x CD-R s always have I usually buy just the -pack in the purple sleeves but I believe that everytime this lockup no-eject issue has occurred on both computers the CD-R has been from a -pack spindle Is it possible that I have a bad batch of discs Do I have a software issue that I can t locate Can anyone help me figure out what the heck is going on The necessaries Laptop - WinXP Pro Roxio Easy CD Creator DVD-Rom CD-RW combo drive Desktop - WinXP Home NERO Express Roxio Easy Media Creator DVD - R RW Dual Layer writer nbsp

https://forums.techguy.org/threads/cd-burning-problem.376360/
Relevancy 39.56%

Hi,

I'm using Nero with my new PC to burn CDs. All went OK when I tried burning two of them (using MP3s off my hard drive) and my PC could see and play all the tracks with Media Player.

However, when I put the CDs into a normal CD player - the one in my car and a couple of others in my home, they will not play!

Anyone have any ideas? I tried halving the write speed for the second CD and still get the same result. Also, the CDs I'm using worked fine on my old PC and using WinOnCD 3.8.

Should I try different software or should I maybe pick the MP3 disk option instead of the Audio CD option?

Please help!

Andy
 

Relevancy 39.56%

I Problem Burning CD can t seem to burn CD Burning Problem a music cd lately I am using Easy cd creator and it has worked for me in the past but now for some reason after I burn the tracks I cant listen to them I closed the session so it can be read in stereo equipment When I try to listen to it in realplayer or media player the tracks show up there tooo and it appears to play but no sound comes out The tracks show up on the disc when I open to see if they are there aswell I dont get it My burner is an Iomega zip x x I think its a couple of years old now so would it be the reason Or am I missing something else in the burn process I tried restarting reinstalling easy cd creator and tried out different programs such as SOund stream or Easy music cd creator and also I have bought several different types of discs and took them back only to get other discs that don t work i made sure the discs were x to x speed I am frustrated because I am not sure what is the problem Any guesses Yanman nbsp

A:CD Burning Problem

For a music CD you might as well close the CD rather than just the session. Entertainment players will not read additional sessions anyway.

If you select the burner in Windows Explorer with the CD in the drive you should see them as CDA files. They often show 0 bytes even though they are recorded OK. Have you tried them in your stereo? You might have the mute set or something wrong in the computer audio. Will a regular factory music CD play OK in the computer?

The old free Sony CD Extreme will work on your burner. It is pretty simple to use Ė just select audio from the opening wizard. There is a link to the manual as well: http://www.webtree.ca/windowsxp/cdr_info.htm

If the Sony wonít write I would suspect your laser/reader has dust or something on it. You might try a judicious burst of canned air or one of those cleaning CDs if you have either. Best Buy has a 52X burner for $20 after rebate this week, so it isnít worth buying anything to get it working when you can upgrade for $20.
 

https://forums.techguy.org/threads/cd-burning-problem.133093/
Relevancy 39.56%

Hi
i;m having this really weird problem with my new dvd burner
I have a computer in my basement with pioneer p-105. i always use DirectCd v.5.3.5.1 to format my DVD-RW discs so i can drag files into the disc and delete them when i don't need it anymore
then today i got a BenQ DW822A(also using directcdv.5.3.5.1) for my computer upstairs, but when i was testing the DVD-RW that i burned using my other computer. It says the files are corrupted and can't read from drive then i took the disc back to my basement computer and it reads it normally.
Anyone know y this happens?

does updating the fireware helps??
 

A:burning dvd-rw problem

lellyville said:

Hi
i;m having this really weird problem with my new dvd burner
I have a computer in my basement with pioneer p-105. i always use DirectCd v.5.3.5.1 to format my DVD-RW discs so i can drag files into the disc and delete them when i don't need it anymore
then today i got a BenQ DW822A(also using directcdv.5.3.5.1) for my computer upstairs, but when i was testing the DVD-RW that i burned using my other computer. It says the files are corrupted and can't read from drive then i took the disc back to my basement computer and it reads it normally.
Anyone know y this happens?

does updating the fireware helps??Click to expand...

From what I understand, this is a common issue. First, check the obvious things. Update everything that neesd to be updated.

Other than that, it is common for cd's and dvd's burned on one brand of drive not to work on another brand. All you can do is make sure that you have the right software for your drives, the right drivers, and the correct disks. Using DVD's for dvd exclusive writers and cd's for cd exclusive drives, etc.

Ayla
 

https://forums.techguy.org/threads/burning-dvd-rw-problem.253054/
Relevancy 39.56%

Hi!!
If anyone here can help me I would be really grateful.

I have had Nero(not sure if its 5.5 or 6 (sorry)) for 3 years now and its always ran fine no problems whatsoever.
At the weekend I tried to burn an audio cd and it keeps telling me to please insert an empty cd even though the discs im putting in are blank.At first I thought it was a dodgy pack of discs so I got some different ones but still no joy with it,so its not the discs.
I can still burn DVD's it just wont let me burn audio cd's.

I have tried to burn the cd through WMP but that wont do it either its telling me my drive is busy,even though its not.
Does anybody have any idea what the problem could be.
Thanks!!
 

Relevancy 39.56%

i have Ashampoo Burning Studio 7 and keep getting error message " No compatible CD recorder found." and can't burn CD in the Guest Account.

Now, I don't get the error message in the Administrator Account and i can burn CD in the Admin Account.

I just recently update the driver and firmware for the CD drive but still doing the same problem.

Can someone help me fix the problem ? thank you.
 

A:problem with burning CD

yes if you have a user name in your system then its a matter of including your username in the administrator group. this will give you the burning rights to do just that... as you realize that you can do it if your system is in admin mode.
 

https://forums.techguy.org/threads/problem-with-burning-cd.766023/
Relevancy 39.56%

Reformatted Philips Iquon successfully.After re-installing my programmes I find that Roxio 7 won't burn cd's.I have been using the same brand for months with no problem.Now the disc ejects and an error message comes up asking me to insert a blank disc.Computer and Roxio suite are about 3 years old.Burning cd's and DVD's were no problem before reformat.
However I can use Roxio Drag To Disc function to add files to the same brand of blank cd or to a dvd,so I don't think it's my cd drive that's causing the problem.I would be gratefull for any ideas.

A:Problem burning cds

Download CDBurnerXP and try to burn a disc with it. If that works then there is a problem with Roxio, not your burner. Try uninstalling and reinstalling if you must have Roxio or go to Roxio's Support Forum for more answers.

http://www.techsupportforum.com/forums/f10/problem-burning-cds-428080.html
Relevancy 39.56%

I have been trying to burn a DVD disk using My DVD and getting one trouble after another What is wrong First out of nowhere I began to get the message that DMA was turned off on one or more devices as soon as I opened My DVD from Roxio So I went to Device After Problem Another DVD One Burning in Manager and checked the DMA settings And it was on But One Problem After Another in DVD Burning again My DVD would give me the same warning message So I uninstalled my drives once and reinstalled them Though My DVD still gave me the same message after one reboot the warning message no longer appeared Next up DVD burning now stops in the middle and the program ejects the disk saying Device Error - Sense Cod - Power Calibration Area Error - Sequential Write I have burned other disks from the same batch at the same speed before I began to see the DMA warning So I m thinking it can t be a bad batch of disks I m really stuck right now Do you think the hardware is busted What do you think Thanx nbsp

Relevancy 39.56%

I'm using WinXP, Nero and an Asus DRW-0402P/D drive.
Recently whenever I write a DVD data disc Nero will appear to burn it fine, but when I put the disc back in to read it opens up like a blank disc with no files.
It does the same when I burn DVD video discs, except they'll work on my DVD player.
The drive has no trouble reading other discs, CD or DVD.
From the bottom of the burnt discs I can see that a volume of information has been written to it, I just can't work out why my drive wouldn't be reading the discs it just wrote. Can anyone help out, please?

A:DVD burning problem

welcome to tsf

did you try a different disk..plus or minus?
also go to the manufacturer's web site and download the lastest firmware available for the drive

http://www.techsupportforum.com/forums/f10/dvd-burning-problem-80083.html
Relevancy 39.56%

Hi to everyone,
The problem i am having is when i try to burn a cd on my nero 5.9.14? i keep getting a message that says. PROGRAM MEMORY AREA UPDATE FAILURE.what is that and how can i fix it.also when i start to drag and drop the songs to nero,the hard drive will have 907 mbs after i drag and drop, there will only be 200 mbs.i find the files in windows temp folder and they are really out of whack.a 5mb song for example will be 64 mbs in the temp folder. Thanks for anyones help.
 

https://forums.techguy.org/threads/problem-burning-cds.392870/
Relevancy 39.56%

hi could anyone help me iam trying to copy a cd but every time i try it shuts down the computer it will burn dvds fine wich tells me the burner isnt brokeni am running xp pro cheers crozzy
 

https://forums.techguy.org/threads/burning-problem.393748/
Relevancy 39.56%

When I play a music CD in drive d and try to burn it in drive e, the copy of the CD in drive e copies with skips in the music, even though I have used a lens cleaner, and have cleaned the CD I'm using, this problem keeps occurring. Would appreciate any help. Thanks guys and gals
 

Relevancy 39.56%

Hi.I have a problem when i try to burn a dvd-r with my LG gsa4163.The process fails with "Buffer too large msg.I can paste a error log if needed.Pls help cuz I`m not really sure if it`s a windows,nero 7 premium or hardware issue.
 

A:Problem with burning dvd`s

Post your error message
 

http://www.techspot.com/community/topics/problem-with-burning-dvd-s.63967/
Relevancy 39.56%

Hi, im having a weird problem, you see..
first i burned some data files into a new dvd, closed sesssion, as i would do with any cd, the computer ejected the dvd, and so far no problem
then i reinsert it and do the same (burn new files), it starts burning and then... closes session and ejects the same dvd and...when i want to see it if burned correctly, i can only see the files i burned the first time. the point is that the free space of the dvd is considerely reduced, just as if it had burned the new files correctly, but there are no new files...
the weird thing is that when i inserted this dvd into a windows xp computer , the new files are there... why cant i see the files in the computer with windows vista i used to burn them? hope someone knows about this issue...

http://www.bleepingcomputer.com/forums/t/150574/burning-problem/
Relevancy 39.56%

Any help would be greatly appreciated. When I encode a Movie, with DVD Santa, then shrink with DVD Shrink. My movie comes out backwards. I never had this problem before. I just redid my System & installed all new programs. Do anybody know what the problem can be?

It encodes fine, just starts @ the end of the movie & plays backwards!

Thank You

A:Burning problem

Originally Posted by michigantoga


Any help would be greatly appreciated. When I encode a Movie, with DVD Santa, then shrink with DVD Shrink. My movie comes out backwards. I never had this problem before. I just redid my System & installed all new programs. Do anybody know what the problem can be?

It encodes fine, just starts @ the end of the movie & plays backwards!

Thank You



Why are you using both "DVD Santa" AND "DVD Shrink"?

DVD Shrink on it's own does the job nicely.

Oh, and as a reminder, this is a Vista forum. You should direct question about Santa or Shrink to any appropriate forums for that software.

http://www.vistax64.com/software/167404-burning-problem.html
Relevancy 39.56%

I'm having trouble with a dvd burner model SONY AWG170A not Burning, copying dvds.
it creates the images okay but they get to the end of the burning process and the error failed to burn comes up.

System is a P4 2.4 1gig ram
150 gig hard drive
Software Nero 7.1.04

1 DVD RW SONY AWG170A
1 DVD rom GDR8164B

I have also used different brands of disk. no Success

tested dvd to dvdr

Cds Dont burn either.
I saved the log to the desktop but really dont know what im looking at.
I can burn an image to the sony.

testing dvdr stand alone
Can copy a cd
Cant Copying data to disk
 

A:Dvd Burning Problem

A quick Google around forums on sites like www.cdfreaks.com reveals a few more-or-less similar problems experienced by users of the Sony/Optiarc AW G170A. That said, I always use the cheap Sony drives these days because I've found them more reliable and accepted without problems by the old programs that I use than more expensive drives.
Sorry, I forgot to check, but I assume the AW G170A is an IDE drive. If so, are you using 80-core rather than 40-core IDE cable? They look the same, but you need 80-core.
Also, you might check whether there is a firmware download available which specifically addresses your problem.
 

https://forums.techguy.org/threads/dvd-burning-problem.638277/
Relevancy 39.56%

Hi,
not sure if this is the right place to place this thread, hope it won't be a problem.

My headache comes when i try to burn files onto cd-r or cd-rw.
I have tried doing that within XP, with windows media player and with the software CD Burner XP. The fact is that everything seems to go fine, i get the message" burn completed successfully" but nothing is on the disk, the only thing i notice is that under the disk properties the File System is RAW. Is that normal?
Any help very much appreciated
 

Relevancy 39.56%

Hi guys this really beats me I hate my DVD-burner Can any of you guys take a look at this nero-log and see what s wrong Home Home K - - - M - - Problem DVD-Burning - Windows XP IA WinAspi - NT-SPTI used Nero Version Internal Version Recorder lt NEC DVD RW ND- A gt Version - HA TA - Adapter driver lt DVD-Burning Problem IDE gt HA Drive buffer kB Bus Type default CD-ROM lt NEC DVD RW ND- A gt Version - HA TA - Adapter driver lt IDE gt HA Scsi-Device-Map DiskPeripheral ST A atapi Port ID DMA On DiskPeripheral HDS VLAT atapi Port ID DMA On CdRomPeripheral NEC DVD RW ND- A atapi Port ID DMA On CdRomPeripheral HL-DT-ST DVD-ROM GDR B atapi Port ID DMA On CdRomPeripheral TP D RTA I aap z e Port ID DMA Off CDRom-Device-Map NEC DVD RW ND- A D CdRom HL-DT-ST DVD-ROM GDR B E CdRom TP D RTA I H CdRom AutoRun Excluded drive IDs WriteBufferSize Byte BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Inquiry Global Bus Type default Check supported media Disabled Burn DVD Image PM Text File SCSIPTICommands cpp Line LockMCN - completed sucessfully for IOCTL STORAGE MCN CONTROL PM Text File Burncd cpp Line Turn on Disc-At-Once using DVD media PM Text File DlgWaitCD cpp Line Last possible write address on media MB Last address to be written MB PM Text File DlgWaitCD cpp Line Write in overburning mode NO enabled CD PM Text File DlgWaitCD cpp Line Recorder NEC DVD RW ND- A Media type DVD-R Disc Manufacturer ID lt RITEKF gt lt gt Disc Application Code Disc Physical Code PM Text File DlgWaitCD cpp Line gt gt gt Protocol of DlgWaitCD activities lt lt lt PM Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE - CD-ROM Mode Joliet indices index not provided original disc pos not relocatable disc pos for caching writing not required not required - gt TRM DATA MODE config wanted index blocks length blocks D NEC DVD RW ND- A -------------------------------------------------------------- PM Text File ThreadedTransferInterface cpp Line Prepare D NEC DVD RW ND- A for write in CUE-sheet-DAO DAO infos MCN quot quot TOCType x Session Closed disc fixated Tracks to Idx Idx Next Trk TRM DATA MODE x FilePos ISRC quot quot DAO layout Start Track Idx CtrlAdr Size NWA RecDep lead-in x x x x x x lead-out x x PM Text File SCSIPTICommands cpp Line SPTILockVolume - completed successfully for FSCTL LOCK VOLUME PM Text File Burncd cpp Line Caching options cache CDRom or Network-Yes small files-No lt KB PM Phase File dlgbrnst cpp Line Caching of files started PM Text File Burncd cpp Line Cache writing successful PM Phase File dlgbrnst cpp Line Caching of files completed PM Phase File dlgbrnst cpp Line Burn process started at x KB s PM Text File ThreadedTransferInterface cpp Line Verifying disc position of item not relocatable no disc pos no patch infos orig at write at PM Text File DVDR cpp Line Recording mode Sequential Recording Mode PM Text File DVDR cpp Line Start write address at LBA DVD high compatibility mode Yes PM Text File Cdrdrv cpp Line ---- Disc Structure Physical Format Information h ---- Media Type Layer Address h AGID Length Book Type DVD-R Part Version x Extended Part Version Disc Size mm Maximum Rate lt not specified gt F h Number of Layers Track Path Parallel Track Path PTP Layer Type recordable Linear Density um bit Track Density um track Starting Physical Sector Number of Data Area h DVD-ROM DVD-R -RW DVD R RW Outer Limit of Data Recordable Area F h Data in Burst Cutting Area BCA does not exist Revision number of maximum recording speed Revision number of minimum recording speed - Revision number table of recording speed - - Class Extended part version Start PSN of the Extra Border Zone FE h Start PSN of Physical format information blocks in Extra Border Zone FFA h Media Specific - email protected FE FF A - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - D - C FD E D - D R B - RITEKF - F A - F B D B - A B E A - C B D D - E C B C F D B F B - P - C D EA- F F B - P ... Read more

A:DVD-Burning Problem

Nero logs are best interpreted by Nero Tech Support.

Tell us exactly what your experience/problem is.
 

https://forums.techguy.org/threads/dvd-burning-problem.641323/
Relevancy 39.56%

I am using roxio disc copier to help make dvd's and I've been going threw way too many dvd's ,when it comes to finishing burning the dvd and close the track, it stops and errors the following: EIONEER DVD-RW DVR-K14L ("Hardware error." [04/44/D6]. Sometimes I am successful and it burns to completion, but I've had a 7 to 1 ratio of bad useless dvd's to successful ones. Its burning at 4x speed, and it seems to burn the whole thing without a problem until the end when its time to close the disc, and it doesn't and the error pops up. Can anyone help me?
 

Relevancy 39.56%

A few days ago my dvd would not burn dvds that were in sync. a friend of mine decided that a re format would be the best bet. The re format was done and now my drive will not burn dvds at all. My dvd drive shows as a master on sisoftware and my hdd shows as a slave. i only have 1 dvd drive and 1 hdd, they are on seperate cables and both have jumpers set to master. i have hit a brickwall with this problem. can anyone please help.
 

https://forums.techguy.org/threads/burning-problem.607141/
Relevancy 39.56%

I have downloaded a free Comodo app to Downloads and am trying to burn it to a CD with ImgBurn but ImgBurn doesn't "see" the download in Downloads.

I just don't understand why? Is there trick to it or maybe someone can suggest an alternative (and simple) app to do this?

A:Burning problem

I use CDburnerXP...I've not had a problem with it.

http://cdburnerxp.se/en/home

http://www.sevenforums.com/software/214632-burning-problem.html
Relevancy 39.56%

My friend needs to burn photos to a cd on a regular basis It has been working for a few months now it is failing His usual process is that cd's burning Problem he selects about photos goes to Share gt Burn to disc It then opens File Explorer shows the DVD drive with the photos in there and then burns the disk and ejects Problem burning cd's it When asked I choose to burn it quot like a flash drive quot But now it has started to fail in this process Sometimes it just stops right after it puts the photos in File Explorer in the dvd drive window and leaves them there without burning Sometimes it continues to the next step and seems to burn them but they are not on the disk And sometimes it completes and works correctly I've tried it twice today It seems to go through the burning process But when I eject the disk and put it back in it is blank although the disk name is today's date so it apparently at least started the burn process And then it shows a pop up bubble saying there are files waiting to be burned to disc and it shows the photos waiting there under Files Ready to be Burned to disc I've also tried the disk in another computer and it confirms the files are not on it but it too shows the disk name as today's date Then I did it a second time same procedure and it worked fine Any ideas Thanks

A:Problem burning cd's

I just tried it again and it failed. I noticed that on the attempts that fail, it does not present the usual dialog at the beginning that asks if you want to burn the disk "like a Flash drive".

http://www.eightforums.com/general-support/54841-problem-burning-cds.html
Relevancy 39.56%

My brother's laptop has issues burning CDs. We recently downloaded our music onto a portable hard drive for him. He took it home, plugged it in, opened WMP and let it find all the new music. We changed the default drive for WMP to g:\ (it previously was f:\). Now, when we try to burn a CD (from a saved burn list), we get a consistent error message that the file is not found at the location (i.e., it's at g:\whatever, but WMP isn't finding it there). I have double-checked each of the songs and they are all on the g:\ drive right where they are supposed to be (I've checked through "properties" and "open file location"). What is the problem? How do I solve this? He thinks I did something to his computer, but I didn't.

A:Problem Burning CDs in WMP

Hi and welcome to TSF if you put the files on his harddrive and try does it do the same

http://www.techsupportforum.com/forums/f217/problem-burning-cds-in-wmp-559802.html
Relevancy 39.56%

When I burn an audio CD using Easy CD Creator on my new WINXP system it comes out blank The time codes are there and the CD will play in any player including a stand alone audio player but thre is no sound recorded When I burn a data CD I get the message quot the CD is in a format unrecognizable by Windows quot If Burning Problem CD I hold the CD to the light I CD Burning Problem see CD Burning Problem that something has been recorded on it Direct CD UDF works fine I can format discs read and write with no problem I can play audio CDs on the CD burner with no problem and read data CD s with no problem I have the Plextor CD burner What I ve tried so far Downloading the CD Burner patch for Windows XP Updating the Plextor firmware Updating Easy CD Creator to and running the Windows XP Update Trying several different brands of blank discs Recording at X Tried recording in both quot CDROM quot and quot CDROMXA quot format A tech told me they think the CD burner is bad but this doesn t make sense Why would UDF file format work by not any other format Anyone have any ideas Thanks nbsp

Relevancy 39.56%

Hello there first time I touched a PC was two years ago and I have learned alot by myself but I cant for the life of me figure this one out I am presently using an ACER ASPIRE Laptop with a SLIMTYPE DVDRW SOSW- S Disc Drive I used Datawrite DVD-R Blanks for burning my home videos for ages without problems scores of them I used Nero at first and then SonyVegas Architect Studio to burn the video footage but now for some reason both software applications inform me that the blank DVD-R s are either write protected or with no problem Burning DVD-R Free Space on the actual discs according to the burning software I am using I have tried other brands JVC DVD-R and RiDisc DVD-R s When I look at the properties of the discs via MY COMPUTER there is no free disc space or is this normal This is my first posted thread and I am slightly nervous and embarassed the solution is probably simple but I need help nbsp

A:DVD-R Burning problem

Hi marakoops and welcome to the TechSpot Forum :wave:

You have posted a problem in the wrong section, you really need to post it here, simply click the edit button and cut the text and then post it in the section I just gave.


Would you please take a few moments to read the following. It will help to make your Techspot experience a more pleasurable one.

Techspot FAQ.

A message for all newcomers.

SNGX1275`s A guide to making a good post/thread.


Regards
 

http://www.techspot.com/community/topics/dvd-r-burning-problem.81113/
Relevancy 39.56%

First off my apologies if this topic has already been covered Did a quick search and didn't find anything I recently purchased a laptop with Windows after the sudden death of my desktop I have been having problems burning an mp problem mp3 cd burning cd It won't play in the cd player in my truck I get quot problem burning mp3 cd bad cd disc error quot messages At first I thought it may have been a problem burning mp3 cd bad cd-r Five cd-rs later I am having the same problem Not the cd player in my truck either Plays an mp cd I burned in XP just fine I used WMP and EZ CD Audio Converter to burn the cds both with the same result I'm stumped The only difference I can see between the mp s burned in XP and W is the bitrate Would that be the problem And how do I change it if it is Any help would be greatly appreciated I miss my tunes when I am driving thanks

A:problem burning mp3 cd

I am wondering if the problem is due to formatting the disk differently, ie Live File System instead of Mastered see here: HTG Explains: Live File System vs. Mastered Disc Formats in Windows

http://www.eightforums.com/general-support/31763-problem-burning-mp3-cd.html
Relevancy 39.56%

I have a laptop with Windows XP and have been having problems burning my music to a CD-R off and on now for awhile. I get this message "Windows Media Player has encountered an error while burning the CD. Verify that the CD burner is connected properly and that the disc is clean and not damaged". I use a CD for cleaning the lens and using a good CD-R which I just bought. I also changed the burning speed on my computer on the properties section of that drive from fastest to 16x. This is not the first time I am trying to do any burning, but in the past it has been sucessful. Any suggestions would be greatly appreciated.
 

Relevancy 39.56%

I'm having a small problem when trying to burn a Movie to a DVD. The movie is about 4.5 gigs, and the DVD is 4.7. The DVD is a DVD+R 4x. My DVD Burner is +R Compatible. To burn I'm using Nero 7 Ultra Edition. And When I burn, this is the error message I get. Can anyone please help me? Thanks...

Edit. I know it says that the Disk Tray is OPEN, but it's actually closed. Before it gives me the error message, the tray opens up, and then the error message appears. Thanks again.
 

Relevancy 39.56%

Hi guys i was hoping you could help me out I've Burning Problem DVD's got a big legitimate dvd library ie dvd's I've bought from stores i have easily over dvd's and blu-rays in my collection and I've got a pretty decent network going with approx Terabytes of storage over computers including my server at home I'm trying to burn my dvd collection because as time goes on dvd's get scratches and become damaged so I want to back each of them up by storing the ISO image on my network and if need be burn it once again in case the original is damaged i do not use p p programs and the sole intention of this is to backup my library and burn it I know dvd's use macrovision protection so I have been using dvd Problem Burning DVD's decryptor to create the ISO's but when I want to burn the dvd's I've found that the ISO is too big for the disc Could someone tell me a free solution to either shrink my dvd's to a smaller ISO image or a way to burn my dvd's and just store the copy somewhere if possible Thanks

http://www.vistax64.com/general-discussion/275386-problem-burning-dvds.html
Relevancy 39.56%

everytime i try to burn an audio cd in nero i get a wasted CD spat at me and a "buffer underrun" error message???

do i have to adjust the buffer size manually?
 

A:problem burning cd's

Hi,

What are your pc specs ? - Ram, Cpu, Burner, version of Win ?

Are you closing down all other apps when you try to burn CDs as programs running in the background use up resources and cause numerous problems ....
 

https://forums.techguy.org/threads/problem-burning-cds.121794/
Relevancy 39.56%

Hi ppl I ve got a problem with CD Burning Couple of weeks before i d burned a CD using Nero ver and i kept it as multisession disc yesterday i continued with the same CD and burned it on Nero ver The thing is while CD compilation it burning CD problem gave me a msg that quot Invalid Data Format quot i ignored it and after that i continued When the burning was completed then i found out that all my previous data was gone and only the data that was written currently was been burned I checked it thru Nero and it showed me the CD size as Mb but when i checked the CD properties the found it to be the size of the currrently burned s w Please can any tell CD burning problem me how can i recover my CD burning problem lost data One thing is it shows the track when i check the disk info option in Nero Awaiting for the reply Plz help me Saurabh India nbsp

A:CD burning problem

closing duplicate
 

https://forums.techguy.org/threads/cd-burning-problem.248596/
Relevancy 39.56%

I have nero 7 ultra edition. i used Nero Vision to burn movies or slide shows on DVD but when i play it on my dvd player..it just says "reading" but nothing loads. Can somebody help me?! thanks
 

Relevancy 39.56%

Hi

i tried to burn some avi file with nero6 to dvd disk, and getting data verification error:
Total files=31, identical=0, different=1, inaccessible=1, skipped=29.

19:19:58 #39 Phase 81 File dlgbrnst.cpp, Line 1818
Data verification failed

what 31 files? I tried to burn just 1 file.
I can't play burned file with wmp. Actually it starts and after a few secs displays "The request could not be performed because of an I/O device error." Close.

Thanks

A:problem with burning avi

Perhaps your drive is defective or Nero is having trouble reading the avi. Try converting it to another format or burning with another drive and see if it helps.

http://www.techsupportforum.com/forums/f10/problem-with-burning-avi-372764.html
Relevancy 39.56%

i HAD WIN VISTA ON MY PC AND JUST BEFORE I WAS GOING TO GET RID OF IT I BURNED SOME MUSIC AND PHOTS ON DISCS NOW THAT I HAVE WIN XP THE MUCIC DISC IS FINE BUT STRANGELY THE DISC ON WHICH I BRNED THE PHOTOS PPEARS TO BE BLANK.....
WHEN I OPEN THE DRIVE I GET A BLANK INTERNET EXPLORER PAGE:
BUT I KNOW THE PHOTOS R THERE ON THE DISC AS I HAD DOUBLED CHECKED THEM BEFORE GETTING RID OF VISTA........CAN SOMEONE HELP
 

https://forums.techguy.org/threads/burning-problem.608482/
Relevancy 39.56%

Hi i just bought a GE dvd player! i then mad a vcd cd with nero 5 of some of my favorite music videos then when i played it on my dvd player it was really choppy it would play pause play kinda thin whats wrong can anybody help im really dissapointed,

Liam
 

Relevancy 39.56%

A few days ago I tried to burn a cd using windows media player.(I am using version 10 and I am running wndows xp home edition) up until that point it had been working fine. well right now it will inspect and convert but it will not burn. it will tell me that the cd is dirty or damaged and that I should try a new one, lower the speed or try a another brand of cd's. I have done all of that to no prevail. Now apparently I can still burn using windows but only in data format. I have also installed all driver updates. Another odd thing is that now my bro's wmp can't burn and his computer is brand new.

Could anyone please help me with this problem? it would really be appreciated

A:Wmp Burning Problem

Heh.. BUY nero burning rom...hah..a little better Scarlett?

http://www.bleepingcomputer.com/forums/t/38669/wmp-burning-problem/
Relevancy 39.56%

what is the problem plz help i burning problem have nec A and burning with NERO this is the log that i get C - - E -MAAX- problem burning - - Windows XP IA WinAspi - ahead WinASPI File C Program Files Nero Nero Core Wnaspi dll Ver size bytes created PM NT-SPTI problem burning used Nero Version Internal Version Recorder lt NEC DVD RW ND- A gt Version - HA TA - Adapter driver lt IDE gt HA Drive buffer kB Bus Type default - gt ATAPI detected CD-ROM lt HY T BEW M gt Version - HA TA - Adapter driver lt SCSI gt HA Scsi-Device-Map CdRomPeripheral NEC DVD RW ND- A atapi Port ID DMA On DiskPeripheral WDC WD JD- HBB viasraid Port ID DMA Off CdRomPeripheral HY T BEW M dtscsi Port ID DMA Off CdRomPeripheral HY T BEW M dtscsi Port ID DMA Off CdRomPeripheral EK O VAR C B vaxscsi Port ID DMA Off CDRom-Device-Map NEC DVD RW ND- A E CDRom HY T BEW M F CDRom HY T BEW M G CDRom EK O VAR C H CDRom AutoRun Excluded drive IDs WriteBufferSize Byte BUFE Physical memory MB kB Free physical memory MB kB Memory in use Uncached PFiles x Use Inquiry Global Bus Type default Check supported media Disabled CD-ROM ISO PM Text File Isodoc cpp Line Iso document burn settings ------------------------------------------ Determine maximum speed FALSE Simulate FALSE Write TRUE Finalize CD FALSE Multisession TRUE Multisession type Start multisession Burning mode DAO Mode ISO Level Max of char Character set ISO Joliet TRUE Allow pathdepth more than directories TRUE Allow more than characters in path TRUE Write ISO file extensions TRUE PM Text File Burncd cpp Line NEC DVD RW ND- A Buffer underrun protection activated PM Text File ThreadedTransfer cpp Line ReadBuffer-Pipe got KB of Memory PM Text File Reader cpp Line Reader running PM Text File Writer cpp Line Writer E NEC DVD RW ND- A running PM ISO GEN - File Geniso cpp Line First writeable address x PM Text File Burncd cpp Line Turn on Disc-At-Once using CD-R RW media PM Text File DlgWaitCD cpp Line Last possible write address on media Last address to be written PM Text File DlgWaitCD cpp Line Write in overburning mode NO enabled CD PM Text File DlgWaitCD cpp Line Recorder NEC DVD RW ND- A PM Text File DlgWaitCD cpp Line gt gt gt Protocol of DlgWaitCD activities lt lt lt Insert the disc to write to Medium in drive Unknown Medium required by compilation CD-R RW PM Text File ThreadedTransferInterface cpp Line Setup items after recorder preparation TRM DATA MODE indices index not provided original disc pos relocatable disc pos for caching writing not required required no patch infos - gt TRM DATA MODE config wanted index blocks length blocks E NEC DVD RW ND- A -------------------------------------------------------------- PM Text File Burncd cpp Line Can only write at x KB s instead of x KB s to current disc PM Text File ThreadedTransferInterface cpp Line Prepare recorder E NEC DVD RW ND- A for write in CUE-sheet-DAO DAO infos MCN quot quot TOCType x Session Closed disc not fixated Tracks to TRM DATA MODE x FilePos ISRC quot quot DAO layout Start Track Idx CtrlAdr RecDep - lead-in x x - x x x x lead-out x x PM Text File SCSIPassThrough cpp Line SPTILockVolume - completed successfully for FCTL LOCK VOLUME PM Text File SCSIPassThrough cpp Line SPTIDismountVolume - completed successfully for FSCTL DISMOUNT VOLUME PM Phase File dlgbrnst cpp Line Caching of files started PM Text File Burncd cpp Line Cache writing successful PM Phase File dlgbrnst cpp Line Caching of files completed PM Phase File dlgbrnst cpp Line Burn process started at x KB s PM SPTI - File SCSIPassThrough cpp Line E CdRom SCSIStatus x WinError NeroError - Sense Key x KEY ILLEGAL REQUEST Sense Code x Sense Qual x CDB Data xAD FF Sense Area x A Buffer x c a Len x PM Text File ThreadedTransferInterface cpp Line Verifying disc position of item relocatable disc pos no patch infos orig at write at PM Text File MMC cpp Line StartDAO CD-Text - Off PM Text File MMC cpp Line Set BUFE Buffer underrun protection - gt ON PM Text File MMC cpp Line CueData Len aa c PM SP... Read more

A:problem burning

Doesn't seem to recognize the disc in the drive. Have you tried another brand of disc?

It also says your hard drive is not in DMA mode, and if thats true then that will slow down transfers and can cause errors. But that could just be an error with Nero the info if the drives are connected to SATA/RAID controllers - which is pretty common now.

You're also not using the latest version of Nero, download 7.7.5.1 from here: http://www.nero.com/nero7/eng/nero7-up.php

I'd probably reinstall the VIA chipset drivers too: http://www.viaarena.com/default.aspx?PageID=420&OSID=1&CatID=1070

Then check to see what mode the drive is in: http://forum.digital-digest.com/showthread.php?t=61905
 

https://forums.techguy.org/threads/problem-burning.550446/