Windows Support Forum

Will an evga gtx 1060 fit in my mother board

Q: Will an evga gtx 1060 fit in my mother board

Hey, so im looking to upgrade my graphics card in my computer, which i bought about a year ago; overall it's pretty good other than the crappy radeon r7 200 series graphics card that came with it. I'm planning on buying an EVGA GEFORCE GTX 1060 3GB soon. I have multiple problems: Firstly i'm not sure if it will fit into my motherboard or if it's even compatible with it, this being a GA-F2A68HM-HD2.
Furthermore, I'm not sure what the power output is of my pc, so idk how to check if it can support it (i also dont know the power requirement of it so any help on that would be appreciated)
Notes, in my case, it is mostly empty spare for the fans, cpu etc, the motherboard has nothing opposite it, with about 10/11 cm of space between it and the side of my pc.
Any help with this would be amazing,
Thanks in advance.

http://www.pcadvisor.co.uk/forum/helproom-1/will-evga-gtx-1060-fit-my-mother-board-4611474/
Relevancy 100%
Preferred Solution: Will an evga gtx 1060 fit in my mother board

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 109.65%

I am running windows Home Premium 64bit. I just did a fresh install and when I ran the WEI the computer rebooted. I can run it with out being in SLI mode, but as soon as I enable and refresh the computer reboots. I am wondering if it is caused by the power supply. I have a rosewill RP650 2 psu. Newegg.com - Rosewill RP650-2 650W ATX12V v2.3 & EPS12V v2.91 SLI Ready CrossFire Ready Active PFC Power Supply

What are your thoughts?? I have the latest drivers and again this is a new OS install.

A:Evga GTX 260 SLI with Evga x58 mother board reboot issues

Hi and welcome to seven forums

How recent is the SLI? Have you just added the 2nd card?

Could you tell us the rest of your system specs or fill them in on your profile.

Do both cards work fine if you just have 1 installed?

Sounds like it could be a power issue if so.

Cheers

Paul.

http://www.sevenforums.com/graphic-cards/187047-evga-gtx-260-sli-evga-x58-mother-board-reboot-issues.html
Relevancy 100.62%

i just got my motherboard RMA d after a power outage i plugged it and when i powered it mother RMA'd DOA? 680i Board EVGA Just on a spark flew from my video card so i knew that my video card was probbably fried so i bought a brand new GT plugged everything in again started it up and nothing there is not a video signal at all my mother board being a EVGA i A has a cool little DEBUG led and all im getting on it is - - when Just RMA'd EVGA 680i mother Board DOA? my computer was up and running i usally got FF Just RMA'd EVGA 680i mother Board DOA? witch i checked on the manual is Boot since Just RMA'd EVGA 680i mother Board DOA? i get a Random - - that is not even in my mother board manual i think that it might be dead on arrival the computer powers up and my fans start running my brand new graphics card starts up and the mobo lights come on another thing about the mother board lights when i would start up my computer before i had the power outage i would only get a BLUE led which would come on when there was power to the system and a Green light that would come on when i powered on now i get those two and a orange one that i think hads a label of J if anyone can help me out with this the things that ive done I reset the bios using a jumper that my mobo manual said I took out the board and re set it in my case I made sure that all my connections were good while i wait for an reply from someone i am going to reset my CPU on the mother board nbsp

A:Just RMA'd EVGA 680i mother Board DOA?

Well, it is likely dead, but dead due to what happened, rather than dead upon arrival.
 

http://www.techspot.com/community/topics/just-rmad-evga-680i-mother-board-doa.100659/
Relevancy 87.29%

Hi friends,
I have windows xp sp2 on 80gb harddisk , mother board mercury make,intel processor now this mercury mother borad what i have donot support ddr2 RAM, i had moved harddisk to intel motherboard box.

i am able to detect harddisk and windows apologies to start safe , last good menu and start normally and command prompt appears, i tried all options but fail to start windows xp.

MY IDEA IS AFTER LOGGING INTO WINDOWS , LOAD INTEL MOTHER BOARD DRIVERS.
Pl. find me solution to loginto windows and resume work.
THANK YOU

Regards
Vinod

A:moved windows xp sp2 harddisk from mercury mother board to intel mother board

welcome
you cant use the same xp on another motherboard.

http://www.techsupportforum.com/forums/f10/moved-windows-xp-sp2-harddisk-from-mercury-mother-board-to-intel-mother-board-354286.html
Relevancy 80.41%

Easy strait forward upgrade, NO PSU upgrade required, size of the card makes it easy to install, scores better than GTX 980 with less power consumption. Just make sure you clean uninstall the previous card download the driver form Evga for the new one and your done. 10-15 min upgrade.
I don't game so I cant day how well it does but I will be using this for video editing so i will post updates if needed. Here is a bench-test I've done: www.passmark.com/.../display.php

http://en.community.dell.com/support-forums/desktop/f/3514/t/19989497
Relevancy 65.36%

EXCLUSIVE! New EVGA Classified Dual-Proc Board ? 270-GT-W555! | Tech Reaction

A:EVGA Classified Dual-Proc Board

Lush... and pricey too LOL!

http://www.sevenforums.com/hardware-devices/53714-evga-classified-dual-proc-board.html
Relevancy 65.36%

Ok so maybe someone here can help me I purchased an BSOD's Evga like crazy Buggy Board used older used Evga i SLI Motherboard and Core duo Buggy used Evga Board BSOD's like crazy cpu for more than its worth Installed a known working set of OCZ Drr Pc and a Nvidia Geforce GTS mb card I had one of these board before so I know its a tuff board to configure I must have something set wrong somewhere or the board is just screwed I could not get win to complete an install it kept crashing on me so I moved it into another PC and then sysprepped the drive but then Buggy used Evga Board BSOD's like crazy Everytime I run a windows update and it asks me to reboot it crashes on me to a blue screen that goes to fast for me to read Then on boot up it wont detect my OCZ Agility SSD drive unless I hit the reset button twice then it finally lets me get back into windows I gave up yesterday because I spent hrs messing with I Sys-prepped my SSD drive again dragged it over Buggy used Evga Board BSOD's like crazy to another PC ran all updates and got windows exactly how I wanted it and then transferred it back to the EVGA board and all was good for about mins then everything froze and all my icons went away and the shutting down screen came up for a quick splash then bam BSOD again then it took another hour to get back to my desktop again because it kept either not finding the ide drives even though its ssd I have it running in IDE mode since its a single drive or it would get to the loading screen and freeze so finally I got back to the desktop then I said ok what do I need to do next to make this thing useable I couldn't think of anything except I hadn't installed an anti virus on it yet before i moved the mouse to click IE BSOD Hard So I took all the heat tubes and heat sinks off the board and scraped and cleaned and re-themal pasted everything on the board figuring maybe its an issue with heat great idea worked for about hrs got my A V downloaded and a couple new updates that came through and reboots worked and all was well Shut it down and went to bed next day every start up gave me about mins of use till bsod bsod bsod or that funky disappearing of the desktop and the shut down screen showing up then bsod I gave up again left it sit a day and then powered it up today and working great for the last hrs then bamn bsod did a reboot that went well got me right back on and now its been working again for - mins no problem if I open the event logs its only showing me critical errors one for boot up yesterday and one for shut down yesterday attaching image for shutdown error So any thoughts or ideas what the problem might be sorry so long but I wanted to be through what if any more info would one need to help determine the problem

A:Buggy used Evga Board BSOD's like crazy

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/hardware-devices/353018-buggy-used-evga-board-bsods-like-crazy.html
Relevancy 65.36%

DX48BT2 is the board i'm looking at getting and wonder if i should go with ddr2 or ddr3 Ram how much of a difference is it and is there other types of ram that would to a good job ..wanting it for ultimate gaming
 

A:Mother board and Ram

DDR3 comes with high clocks but also with price and high latency. So, high quality DDR2 would(COULD in some occasions) still outdo DDR3. To a point, latencies can determine the performance more than clocks.
 

https://forums.techguy.org/threads/mother-board-and-ram.738741/
Relevancy 65.36%

Is it possible to change mother boards without losing my installation of XP?
 

Relevancy 65.36%

I want to hp originel motherboard .part no:732087-501 i want only india.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Mother-board/td-p/5747403
Relevancy 65.36%

I am tryin to build new computer and have bought a AMD athlon XP MSI K N Delta mother board New Midi tower case DDR ram new WD Gig HD and my Gig AGP video card also have transfered my exisiting DVD cd rom and CD RW cd rom into the case also my old Gig HD which has Win ME on it which is set to master and the new one is set to slave and is formatted and partioned my problem lies here in when i turn the computer on it doesnt beep and just hang i have checked all the jumper settings for the board and have also cleared the bios in hope of it starting now this is the hard part this is the second motherboard i have had the first did the same so sent it back and Help Board Mother this replacement one does the same nothing it just doesnt want to go into the bios all Mother Board Help leads have been checked and triple checked any ideas and help would be grateful nbsp

Relevancy 65.36%

Hi,
I have a pentium III system with ASUS CULS2 motherboard and it's running on xp pro. I'm wondering how much hard drive capacity it can keep up with. I tried it with up to 230 GB and it worked and in a while i'm going up to 320GB and wonder whether the mother board will support it. And also i'm wondering how to update the BIOS in case if I have to do that. Should I have to backup the old BIOS before it and where can find the new version? I'm really looking for your help.
Thanks
 

A:mother board help

Should work fine. You'll have to partition the drive.
 

https://forums.techguy.org/threads/mother-board-help.219927/
Relevancy 65.36%

Have an E Machine PC it is not booting up, so, I open up the computer. I saw the CPU fan was not running and the processor was hot. I went out purchase used CPU Celeron, the computer is doing the same thing and not booting up. Do you think the CPU and the mother board is bad. The power supply is good, the fan in power supply is working. I also used a power supply tester.
Thanks!
 

A:cpu and the mother board

Was your old CPU a Celeron as well? Same speed?

You may want use the Clear CMOS jumper to clear the BIOS settings or you can pull out the CMOS battery for a few minutes.

Try reseating the RAM and video card as well. Or try a known good piece of RAM and a good video card. You can disconnect all the drives and remove any unneccessary PCI cards like a modem.
 

https://forums.techguy.org/threads/cpu-and-the-mother-board.294879/
Relevancy 65.36%

So I just bought a new mother board for my dell studio 1458 laptop and it was a direct replacement except the graphics card is different. I put everything back together, and went to boot. The screen stayed a dark black green flashed a couple times and it beeped at me a few time. When it did come up, the screen was really dark, and it came up as trying to fix windows from not booting. Also during this time, the CPU fan was screaming. What's going on here? Did I miss a step?

A:help with new mother board!!!!!!!

Sounds like something might not be seated all the way...worth double checking.

http://www.sevenforums.com/hardware-devices/274456-help-new-mother-board.html
Relevancy 65.36%

I have a Compaq Presario CQ5210f with a M2N68-LA (Narra6) motherboard and I also have a old Compaq Presario SR1010NX with a MS-6577 (Giovani, Giovani2) mother board and it seems like the second mother board is better than the first. I would like to know which one is better because I have both computer towers but only use the CQ5210f. I am planning on putting in a new graphics card soon and I cant afford a whole new computer or motherboard right now so I have to pick between these to.

SR1010NX mother board: HP and Compaq Desktop PCs - Motherboard Specifications, MS-6577 (Giovani, Giovani2) - c00063244 - HP Business Support Center

Narra6 mother board: https://h10025.www1.hp.com/ewfrf/wc/...6&lang=en#N389

A:Which Mother Board is better?

No contest the second one. The first is an ancient (in computer terms) Pentium 4/DDR/AGP based board, whereas the first is a much more recent AMD AM3/DDR3/PCI-E board that the Compaq bios allowing can up to probably the Phenom II x4 965, which will eat that old P4 for breakfast (would eat for lunch and dinner too).

http://www.sevenforums.com/hardware-devices/160234-mother-board-better.html
Relevancy 65.36%

My computer i have rightnow is a HP T and its around years old at its Mother board to the point were it cant do anything right with out random performance drops so were going to get either a new computer or build on Ive told my mother that building would save atleast dollar Now my problem is i need a mother board that can take GB of ram DDR SDRAM and we dont need more then gb memory the computer we hae right now has gb and only gb are used so i think we an save money froom haveing les mem I plan on playing Mabinoig combat arms Dragons nest Vindictus mincraft and my sister plans on playing Sims all of this on my computer and being able to record videos like minecraft on top of that the normal flash games this is like - mb of space not much so alota space isnt needed but a fast enough mother board is needed Also what is a good enough graphics card to play these games they arent high end graphics and i dont need high end either so yeah name em please and make em cheap nbsp

A:Mother board

Additional Details

Some where around 400-600 dollars and i only want a hard drive with around 120 gb and ii ment 4 ram slots i will be playing games that are like bf2 level of graphics and things. i have a case for the computer but i need a new mother boards and a decient graphics card. the power supply i have is stock so a cheap but decient power suplly would be nice.
 

https://forums.techguy.org/threads/mother-board.1017165/
Relevancy 65.36%

How can I find out what mother board I have?

--maxim
 

A:Mother board

You can download sisoftsandra from http://www.tweakfiles.com It will identify some motherboards or else the hard way. Look at it and find the manufacturers make and model or the fcc number. The fcc number is generally located right around the dimm slots.

or you can try ctbios, it will read the bios rom's and report what is there. http://www.windrivers.com/identity/mboard/biosid.htm

 

https://forums.techguy.org/threads/mother-board.49773/
Relevancy 65.36%

so ive been having a problem with my computer upon startup it loads boot menu and goes to windows vista loading screen but tends to stay at it forever resulting in my holding down my power button till it shuts off then trying again but anyways ive been having to do that alot lately and sometimes i gotta go to system repair sometimes i can actually get onto Board Did die? Mother my my computer but then after running a game it Freezes or Shuts off wich is not normal its not a bad comp now for some reason when i Did my Mother Board die? try to boot my comp it wont even display anything but it still does run please help this is very frustrating im pretty sure that my hard drive went but im not sure if anything else did aswell with it Also is there a way i can checl to see if the hard drive still works by putting it in a diff comp cuz i need to backup alot of files on it Thanks nbsp

https://forums.techguy.org/threads/did-my-mother-board-die.944792/
Relevancy 65.36%

Have a Question... after replacing a motherboard if you forget to put thermo paste on the processor and it over heat will I have to also replace the motherboard and the processor this time.
 

Relevancy 65.36%

i have a dell dem 8100 and it has a planar mobo it is a 5e692 i need to know if it is an atx or what it is i am going to buy a new case and need to know please help me out i am new to this stuff
 

A:need help with my mother board

It should be an ATX form factor. I have an 8300 and it's a standard ATX mobo. The only thing you need to be careful of is that there isn't anything proprietary like the front panel connections or power supply connections. Sometimes they use things that are not standard.
 

http://www.techspot.com/community/topics/need-help-with-my-mother-board.58717/
Relevancy 65.36%

i am using a intel m/b model d845gl va with the o\s winxp pro service pack 2
can anyone help me with the insruction to bring the bios menu up i am not going to touch it i just would like to no if any technically minded person needed to.tia.col.
 

A:mother board.?

Your MoBo uses an amibios, you can enter setup by tapping either Del, F1 or F2 keys on POST or during boot logo.
 

https://forums.techguy.org/threads/mother-board.361233/
Relevancy 65.36%

System specs are Pentium gb ram Asus P R -VM motherboard Problem is I m pretty sure the ram is dead or very slowly dying constant program crashes different stop errors such as x a and x e win k sys Things I have tried Mother RAM? board or are swapping RAM to different memory slots cleaning the RAM changing win k sys to win k old Tested RAM with MemTest The latter threw up about errors in less than minutes Doing a little bit more searching around I m wondering if its the motherboard that is failing I have Mother board or RAM? tested the hard drive its fine no problems there I have also done a fresh install of xp with sp and still having the same issues I have tried to create a disc with the microsoft windows memory diagnostic tool I can t burn the iso every program throws up errors burn at once tells me the iso is too small Have tried extracting the files and burning to a blank cd set boot option to my cd drive but it just wont work Are there any other diagnostic tools etc that I can use to determine if its the memory slots failing of the RAM The ram is DDR RAM sticks I have other ram but its PC I did try testing with this but the computer wouldn t boot up with the PC I would try putting the DDR on the other motherboard but that one wont support the DDR What should I try next At the moment I can t use any programs without having crashes or having to restart the computer I m not to keen on the idea of getting memory until I know for sure its not the motherboard nbsp

Relevancy 65.36%

I was wondering if anyone has any tips on where to get parts to fix/replace a mother board for not too much money? I was informed yesterday that my mother board was shot on my year old gateway laptop. My husband is pretty good with computers and has built our desktops that we've had but he's currently deployed so I have to wait until he returns to fix or attempt to fix my laptop. I live in CT but am more than willing to order parts online. Thank you.
 

Relevancy 65.36%

well don't now if anybody can help but ill give it a go.
bought packard bell 5077 (imedia) last year for my wife working ok very good spec, but was getting board of the case (tower) so bought new case & swopped everything over ok all works fine apart from have no idea how to wire up the the top usb2 ports, yes it had them before but were all multi block conections now its loads of single wires HELP HELP. the only thing i can get from the net is the mother board is a columbia4?????? but cant get the full wiring diagram. any help would be nice CHEERS..
 

https://forums.techguy.org/threads/mother-board-usb-set-up.226807/
Relevancy 65.36%

I have a defective computer with a busted cpu (Athlon, 'forgot the speed). I like to replace it with Athlon XP2000 or higher. My mother board is ECS K7VZA rev. 1.0. Will the Athlon XP2000 or higher work on my mobo. Help please.
 

Relevancy 65.36%

I want to unplug everything from the existing mother board, remove it, and slide in a new mother board, reconnect everything, boot from the Win XP CD, do a repair and take off running without having to re-install all the application programs.
Will this work, or do I have do do a completely new install of XP and reinstall all the applications?
 

Relevancy 65.36%

My son s computer was running a little slow Then when he went to turn it on it would boot up but would let him board????? my Is It mother past the start up screen Kept asking for password I took it to my computer guy he checked said he couldn t find anything wrong He wiped it out and reinstalled He said he did this two times Is It my mother board????? Then he calls me and says he needed to try something else Calls me back next day says its my mother board No good Called him yesterday said that it wasn t ready needed to reinstall everything This is now the th time he is reinstalling Called today said it s not ready taking long time to reinstall everything Told me I could probably pick up a new computer for about I told him to just reinstall everything Told me he was trying but said that he may not be able to Can anyone shed some light as to what is going on I don t trust him all of a sudden Why reinstall times Any suggestions what it could be or what s going on nbsp

A:Is It my mother board?????

Sure sounds fishy to me. If you can get it back maybe someone on the forum can assisst you to get it up and going.
 

https://forums.techguy.org/threads/is-it-my-mother-board.855520/
Relevancy 65.36%

This is the firt time I have used a forum so I hope I am doing this correctly. I am still new with computers and I installed my first new motherboard today. Every thing went good but I hooked the on off switch wires incorrectly. I think I got it on two + posts. Needless to say I did let some smoke out of the switch box. I have since corrected this but now the computer will not boot up. Did I fry the new motherboard? Any help I can get would greatly be appriciated.
Paul

http://www.vistax64.com/general-discussion/268210-new-mother-board.html
Relevancy 65.36%

HI....
i am purches assus P5KPL-AM/PS mother board but audio (on board) cannection not there. it is possiable?

regards

A:mother board

Rup, did you install the cd that came with the board?

http://www.techsupportforum.com/forums/f10/mother-board-405463.html
Relevancy 65.36%

Hi, i need to know how much RAM my mother board can take, it has 2 slots.. but i was thinkking i would get 2 x 1 GB stickas of ram.. i was wondering if it would take that much..

Info:

 

A:My mother board..

http://www.atozincomputer.com/catalog/gigabyte_k8vm800___amd_athlon_64_motherboard_and_cpu_combo_4467394.htm said:



MEMORY
Supports up to 2 GB DDR 400/333/266 Modules via (2) 184-pin DIMM slots.Click to expand...

I think thats your mobo there.. just double check by going to the link i gave..
Make sure you have matched pairs of ram to ensure max compatibility..
 

http://www.techspot.com/community/topics/my-mother-board.58866/
Relevancy 65.36%

TENGO UNA NOTEBOOK HP ENVY ALUMINIO, 17T-J100, 18Gh ram, 2 discos duros. debo reemplazar la placa base, la pregunta al momento de solicitarla con estas caracteristicas lo puedo hacer o existe alguna otra a considerar: Mod. 17t-j100. serial: 5CG5111GZJ. n| MOTHERBOARD: SPS: 720265-501. CT 1541. TAMBIEN DONDE LA PODRIA ADQUIRIR

Relevancy 65.36%

Hi,

Here i have an P-III mother board but in that i does not have on board speaker and also if try to connect external speaker there is no connector for connect that ex. speaker. So how to i check the RAM slots in that board is workin or not.

Kindly help me.
 

Relevancy 65.36%

I currently have a quot soyo quot P P mother board two gig memory in my computer I need to upgrade for quot speed quot quot memory quot and now that soyo is out of business I need a reliable supplier who is going to be around for a while for upgrades to the BIOS What is the latest in motherboards for all the above with gig of memory I think I have a quot baby at quot motherboard I have antec quot file server quot which is bigger then a standard computer box I have fans in it to keep it cool one is on the supply two in front and two in the rear of the box I need all the extras like a few extra bus and firewire connector Dual core I guess Thanks I ve tried everything to make this go faster The only thing I have in the start up is my AVG free That s what takes the longest to load at boot up I don t know if windows windows due Board New Mother out will make it New Mother Board faster Thanks nbsp

Relevancy 65.36%

New Guy here is in need of locating an older Latitude CPX Mother Board. I realize this is a tall order..because its old, but thought I would check. I was permenetly injured a few years ago (seriously) and am trying to get 3 kids into and through school. I have this Latitude..CPX yea its 6 years old, but I have nothing in it. IS it possible to locate a Mother Board. The Keyboard area of the mother board is out, i was told. I bought a new keyboard... only to find its likely the mother board. The minute I download the keyboard drivers... the keys work properly. Then, when I restart it.... boom... the keys are all screwed up. I hit the N key and a 6 appears??? Stuff like that. Anyway, any leads or suggestions, please let me know. I'm a real rookie at computers. Thanks,
 

A:Need Mother Board

Hi Buzz,
It sounds like you need to remap your keyboard. Go the following Microsoft webpage:

http://www.microsoft.com/downloads/...69-57ff-4ae7-96ee-b18c4790cffd&displaylang=en

and download the Server 2003 tools software for free (good for XP too). Run the "remapkey.exe" tool to reprogram your keyboard--provided you're running Windows XP, of course.

Hope this helps! Good luck!

norbac
 

https://forums.techguy.org/threads/need-mother-board.608084/
Relevancy 65.36%

I had my daughter's computer fan fixed and I told them not to erase anything but the computer has been reset. Is there anyway to retrieve information from the mother board that we need?

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Mother-Board/td-p/5822635
Relevancy 65.36%

One problem that has me perplexed . When a customers motherboard goes down , it means reformatting and re-installing XP. Of course all my customer info is gone. If you try to boot up With the new motherboard XP will not load. It launches a critical error and says the boot sector has a virus. I know that XP has this built in to prevent it from being installed on several different computers . This anti-piracy is based upon motherboards bios.

I will not build a computer with pirated software but when the legal owner of the PC and the software needs his computer fixed he should not have to lose all his info. This is when I miss 98 , ME. Under those most computers it was replace motherboard and after several reboots you were all ready to go with all your data intact.

has anybody come up with a work around for this ?

A:When Mother board goes w/XP

What kind of computer are we talking about? According to MS, if you get an OEM motherboard from the manufacturer, with SLP (System-Locked Preinstall) in the BIOS, that's all you need. They don't mention any re-install. Maybe you can sort it out from This Page Is it possible to do a repair install and save the data?

http://www.bleepingcomputer.com/forums/t/11680/when-mother-board-goes-wxp/
Relevancy 65.36%

hello my main board is dead finish finito OK now i wont to bay new mother board can i bay any mother board or it has Board Mother to be a specific one or as same as Mother Board the old I rely do not know the maker of my mother board all i know is that it has Pentium in it When i go to bay new mother board what info do i hawe to bring with me about my computer or can i just bring my old mother board with me and say to the computer guy at the store give me the Mother Board same or closest to Can i use old Pentium and put in to new mother board or do i have to bay new chip Can use same memory sticks from my old mother board an use it in my new mother board which it might not be the same model PS What would be the price of the mother boards i realy do not need anything expensive nbsp

A:Mother Board

Well, all u need is a "p4" mobo, becuase all have the same procesor socket. U need 2 mind out whether u have ddr dual ddr or sdram. The easiest thing is, as u said 2 take the mobo 2 the comp guy, and ask him about momory.
 

https://forums.techguy.org/threads/mother-board.191765/
Relevancy 65.36%

Hey,
How can i tell if my motherboard is PCI-e x16. I know its PCI-e but no idea what the x16 is or where i can find out. Its a Gigabyte GA-81915PMD and im looking to buy a geforce 8600 GT video card, will this be compatable?
All help apreciated.
 

A:How can i tell if my mother board is...

bahh, no english sites with that motherboard for some reason...

Actually, can't find any information about that board at all, you sure you copied it right?

You can always open up the case, and see if there's physically a PCIe x16 slot there or not. Some pics of the PCIex16 and how to differentiate it and the AGPx8 slot here.
 

http://www.techspot.com/community/topics/how-can-i-tell-if-my-mother-board-is.78452/
Relevancy 65.36%

hello every one .I am hopeing you might be able to help me .I have a 14 month old computer what decided to stop working what i mean is it just said my mouse and keybord could not be loaded and it seemed to be stuck on a black screen before my windows xp, also i noticed the clock at the bottom was losing time .a few days before hand any way i turned to a shop and they said i needed a new mother board as the old one had lost its drivers and no new ones could be loaded . They have fitted a new mother board but now it seems my instalation discs what the original computer supplier supplied do not work so i cannot reformat my hard drive . please leave an easy to under stand note here if you can help me as i am not a bright person when it comes to this thankyou

A:My New Mother Board

You can use your Windows op system to reformat your hard drive, but then you would need to reinstall the operating system and you stated you do not have the disk.

What exactly are you trying to do? Why do you feel you need to reformat the drive?

http://www.bleepingcomputer.com/forums/t/41133/my-new-mother-board/
Relevancy 65.36%

I just recently got a new motherboard for my uncles computer... before it was working fine until we did some windows updates and when i restarted the computer it just did not work all of the sudden... it did turn on but it would freeze at the windows loading screen.... so i bought a new motherboard hoping to fix that problem... now having the new motherboard set up i try going into the bios and when i do my keyboard or computer ends up freezing... i can move up n down for a couple seconds then it just freezes... i hit f8 to go to boot menu and select the cd drive that my windows cd is in... then it says press any key to boot from cd then says it is checking my computer specs n such n from there it doesnt do anything.... please help
 

Relevancy 65.36%

Hi my motherboard has died and i was wondering if it is possible to transfer my hdd to my new mb thank you

o yes op system is wndows 7 pro

A:hdd w7 pro new mother board

As long as the new motherboard is identical, then yes the drivers and the OS will work with it.

http://www.techsupportforum.com/forums/f217/hdd-w7-pro-new-mother-board-1051290.html
Relevancy 65.36%

Do you think this mother board is ok and good quality etc And will be ok for this Socket-A SOLTEK SL- DRV VIA KT Chipset ATA- AC Sound DDR Memory Supported http www soltek com tw English home htm AMD ATHLON PALOMINO XP ghz Socket A Athlon not palimnio SOCKET A ThermalTake Volcano THERMAL SPEED board? Mother CONTROL Copper AMD gig DDR-DIMM meg KINGSTON DDR PC DDR-DIMM meg KINGSTON DDR PC CD Burner IDE x x x ASUS with recording Software Model CRW- A DVD-CD-ROM IDE x DVD SONY OEM Model DDU SeaGate gig rpm Barracuda IV ATA- GeForce TI X-MICRO meg DDR Ram TV OUT Games pack Internal PCI V WEB Excel ESS Chipset Keyboard amp Mouse KIT MICROSOFT Hardware Value Pack Ergonomic Keyboard amp Intellimouse Undecided on speakaz Midi-Tower A-Open ATX watt Model H A P Ready USB PORTS FULLY OPTIONED Sony Floppy Drive Second hand monitor Also will it be easy to overclock cpu do any of u have expeirience witht this brand etc Thnakyou in advance Esky nbsp

A:Mother board?

you wont like that monitor , I got one .
 

https://forums.techguy.org/threads/mother-board.86670/
Relevancy 65.36%

Hello,
I am wanting to get a new mother board, to use with the AMD XP 1700 or greater processor. I am wanting to sue RDRam. However all I see is DDRAM boards. Is DD and RD Ram the same thing??? If a mother board supports DDRam will it also support RDRam???
Is there any reomendation for a mother board that will use RDRam and the AMD chip???

Thanks,

Bear
 

A:Mother Board

Currently, there are no motherboards or chipsets that support RDRAM with AMD processors. It could be a possiblity in the future.

RDRAM and DDR RAM are not at all the same thing. They are two different types of memory. None of the memory types are interchangeable. A particular memory slot can only accept one type of memory. Some motherboards support two different types of memory, but they have separate slots for each type, and you can only use memory sticks of one type. You cannot use both types at one time.
 

https://forums.techguy.org/threads/mother-board.61074/
Relevancy 65.36%

PLZ REPLY TO THIS ASAP

ok i finally decided to ditch my old 478 socket mother board and of course im gonna toss my cpu and my ram too..i dont know much about mother boards or their specs

just recommend me a good board that supports AGP system coz theres no way im gonna change my video card also supports DDR3 memory and all new processors coz i have no intention to toss it again
 

Relevancy 65.36%

ok like the subject said i need one about in that range. im building a computer as u can tell right now i have (i should of gotten the mother board as one of the first things ) a 512mb sdram card a radeon 9000 pro 128 agp graphics card a 48x12x48 burner a 52x cd romdrive a 350 watt antec power supply and a antec case that 8.1" (W) x 20.6" (H) x 18.6" (D) and i plan on having a pentium 4 proccesser at 2.4 ghz and a 40 gig hard drive so if u could tell me where i could get a motherboard that would suit that computer please tell me where i can get it!!
 

Relevancy 65.36%

I have a nice Asus P5b-VM here is a pic well actully three pics

A:what mother board do you have?

I am using, as shown in my specs, an Asus P5K

http://www.sevenforums.com/hardware-devices/18450-what-mother-board-do-you-have.html
Relevancy 65.36%

which specification of a mother board will show that it has a 20 pin or 24 pin power socket
 

A:mother board

Power supply:
http://www.atxpowersupplies.com/

Converters are available for 20-to-24 and 24-to-20.
 

https://forums.techguy.org/threads/mother-board.525799/
Relevancy 65.36%

my processor is 2400+ but no new board it is showing it 1800+
 

A:Mother board

Try clearing the cmos, your mobo manual will tell you how to do it.
 

http://www.techspot.com/community/topics/mother-board.89624/
Relevancy 64.93%

ok first off i got this board second hand from my brother he couldnt get it to work at all however he thought it was a video card compatability issue He had a ATI Radeon card and its an NVIDIA chipset on the board Now that ive giving a tiny bit of back ground ill give you the systems specs or atleast the specs itll be once its working and can see things CPU Intel core duo E RAM GB DDR x OCZ REAPER Motherboard As mentioned EVGA NVIDIA i sli GPU GEforce GS PSU Sparkle W gold class TB for storage and a GB + no =( sli output board video Evga 680i Nvidia for the OS Thats whats in my box and the box itself is a Rosewill Evga Nvidia 680i sli board + no video output =( CRUISER So far everything looks like its powers up right and and the HDD spins up it seems like its posting correctly i jus cant get anyvideo out of it Any suggestions would be helpful also keyboards will not work in any usb port and on the mointer it says entering power save mode it detects the cable being there but does not get a signal ive tried multiple keyboards and multiple video cables nbsp

A:Evga Nvidia 680i sli board + no video output =(

sounds like it's just a faulty board... it doesn't matter if you have a single ATI or NVIDIA card, it should work with either
 

http://www.techspot.com/community/topics/evga-nvidia-680i-sli-board-no-video-output.160688/
Relevancy 64.5%

dear friends, first of all happy new year to all.

i want to know the specifications and names of different types of slots in mother board, from the beginning to this date.
 

A:mother board specifications

And what computer course are you doing, that requires this (plus the other similar question posted in the forum)?

Have you tried Google for this information, or do you just want people here to do the reseach for you?

The information you seek can easily be found on Google, for all such matters.
 

https://forums.techguy.org/threads/mother-board-specifications.531530/
Relevancy 64.5%

i there i did have a asus a8n-e which has gone back to asus for rma
can you please reconmend a great mother board for 100.00 or less which is 939 socket and i have a 3700 processor,
cheers
iam currently using my dads laptop which is not good trying to use it on the floor,
pins and niddles ouch,
thanks inadvance.
 

A:mother board for £100.00 or less 939 socket

DFI LanParty UT NF4 Ultra-D: http://www.overclockers.co.uk/acatalog/Online_Catalogue_Socket_939_520.html
 

https://forums.techguy.org/threads/mother-board-for-%C2%A3100-00-or-less-939-socket.494101/
Relevancy 64.5%

I would like to take a HD from a PC that needs a new Mother board replaced and put it into a computer that works. Can I do that? I have the HD in a usb case for now so that I can save drivers to it but, where from the good PC are the drivers?
 

A:I would like to take a HD from a PC that needs a new Mother board replaced and put

https://forums.techguy.org/threads/i-would-like-to-take-a-hd-from-a-pc-that-needs-a-new-mother-board-replaced-and-put.518342/
Relevancy 64.5%

I have Win7 Home Premium. I need to replace the motherboard.
Will I have to go thru Microsoft to re-register my OS? I initially used the Win7 32 bit upgrade version. Thanks for any advise.

A:Replacing mother board

  
Quote: Originally Posted by ronnielee09


I have Win7 Home Premium. I need to replace the motherboard.
Will I have to go thru Microsoft to re-register my OS? I initially used the Win7 32 bit upgrade version. Thanks for any advise.


Since it is a retail upgrade version of home premium then the below tut will be needed to ensure successful activation

Clean Install with a Upgrade Windows 7 Version

If your windows still does not activate upon re-installation the follow this tut

Activate Windows 7 by Phone

http://www.sevenforums.com/general-discussion/156267-replacing-mother-board.html
Relevancy 64.5%

Hi guys,

As you can see from my system spec I am currently running a old sock A mo/bo and cpu, my win-7 32bit O/S is installed and runs ok (a bit slow but stable)

However, I have just treated myself to some new parts which are, Asus M4A785TD-V EVO Socket AM3 mo/bo, AMD Phenom II X4 955 Black Edition 3.2 GHz Socket AM3 CPU and Kingston 4GB (2x2GB) DDR3 1333MHz HyperX Memory Kit CL7 1.7V Ram.

Once these new parts are installed and I connect my current hard drive with my current O/S installed will it boot into windows or will it not like all the hardware changes ?

A:Upgrading mother board, Cpu and Ram

It's possible that it will boot into Windows and install the necessary drivers and such. I would not trust it myself and would opt for a new installation instead.

http://www.sevenforums.com/general-discussion/54684-upgrading-mother-board-cpu-ram.html
Relevancy 64.5%

I wanted to update my mother board drivers. There seems to be a few that need updating. My question is, that is it kinda tricky to do these updates? Can you mess things up if you don't do it correctly? My mother board is a Gigabyte GA-81945P-G. Is it REALLY necessary to update these drivers, even if my system is running good? Thanks for any ideas on this.
 

A:Mother board drivers

I would only use the CD that came with the motherboard to install the drivers. If everything is running ok I would not upgrade the drivers unnecessarily. This used to be a school of thought, but isn't the case anymore. If it works don't fix it. I never choose to randomly update my graphics or auto drivers any more. As long as they are working I leave them alone. Updating the drivers can sometimes result in negative results and cause you to roll back the driver to the previous one.
 

https://forums.techguy.org/threads/mother-board-drivers.708522/
Relevancy 64.5%

I have an emachines computer that I think the board is gone. You turn it on and you don't even get a bios or diagnostic screen. All there is a one beep after the other

Maybe gone?

Also,l on a different note-

Net card settings, should be left at auto matic or should it be set to one of the settings on the list

Thanks
 

Relevancy 64.5%

i have a socket 478 mother board which doesnt not want to switch on when i press the power botton only the cpu furn turns and everything in the computer case powers up but nothing appears on the monitor in other words it does not boot at all and i have tried clearing up the cmos plz help
 

A:mother board problem

OK, you need to post more info.

Is this a new build that does not post or is it a system that has been running for a while?

Have you added any new hardware and or software to the system?

Have you attempted a bios update?

In addition post your exact system specs.
 

https://forums.techguy.org/threads/mother-board-problem.698546/
Relevancy 64.5%

it mite seem like a stupied question but i just found this old mother board from one of my old comps and i cant find out what kind it is ther all these numbers like it says ISN: (then a really long number) then S/N (then a reallly long number) then B/N (with a short number) would any of those help me find out what it is?
 

A:mother board questions

Check the writing printed on the motherboard circuit areas, usually there is a model name somewhere. (I just struck a PC Chips motherboard that didn't though, had to download Everest Home but that only helps with an installed motherboard).

Otherwise, google the reallly long numbers and see what you get.
 

https://forums.techguy.org/threads/mother-board-questions.496900/
Relevancy 64.5%

where can i find a diagram for an fic k8mc51glf mother board i tried the fic web site but could not find one
 

A:mother board diagram?

Hello and welcome to Techspot.

I can`t find that model on the fic website either. Are you sure you`ve got the correct model number?

Is the mobo currently in use? If it is, the free Everest or SIW programmes may be able to identify it.

Regards Howard
 

http://www.techspot.com/community/topics/mother-board-diagram.61221/
Relevancy 64.5%

Have a K7S5A Pro 5.0 mother board
XP Pro_SP2 operating system

Walked away from a machine that had sound, returned later to a machine without sound.
Speakers check out OK _ No sound from front or rear head phone jacks _ Device Mgr, indicates that all is working _ Sounds & Audio Devices Prop. shows "No Audio Device"
I tried out a driver updater program but ended up going to ESC? for updated drivers. But no help.

Have I missed an easy setting change or something? or am I looking at a soon to be dead MB?
 

Relevancy 64.5%

Hello,
Thank you for taking the time to read this message.
It has been a few years now since I have built my own system.
I do not think the old days of FDISk exist anymore, I could be wrong.

I am thinking of building another system, this Pentium 4 3.00GHz system is getting a little tired.

I have a hardrive that is filled with a lot of cool stuff. My question is :
If I build a new system Mobo/RAM/Video/ etc. will my hardrive bomb out on me and not work with the new system ?
It has been a while and I am getting a little rusty with the new stuff.
Thank you for your time and any information will be appreciated.

Rick
 

A:New Mother Board and System

I do a lot of upgrades and new builds. What size is your old HD? Is it SATA? Smallest HD installed here in SA is now 160GB and SATA is the option.

What I do as basic now is install 160 GB system HD, backed up by a 250GB min data drive for Movies/Music/Data etc.

If you are serious about upgrade that's gonna last you another 5 years or so and handle all the desirable stuff that makes a computer worth owning, why not go Core Duo min 2.3 GHz rather than single core?

Put your old HD into semi-retirement and annexe it as another optional "slave" drive for accessing your cool stuff. You'll need to have the installation discs for your OS and programs for the new drive.

One trick I often do is an image backup of the old hard drive and do a restore onto the new drive. There's a lot of ducking and diving to set it up, but the benefits are often a nice way of moving house and keeping the furniture to come with.

I always check to keep the MOBO's old/new chipsets in the family, eg. VIA on old ... VIA on new, so I get minimum upsets on sound/video driver compatibility. New MOBO will come with install disc anyway.

When the system fires up and boots into XP I do a check disk that sorts out any loose ends on the reboot.

I see you are a regular here for problem solving so I am sure you are well capable of climbing in and giving yourself a worthwhile upgrade to drive around with the some of the newer models LOL.
And just for fun you could safely check your old hard drive (switched to master with the new one safely unplugged from power and IDE strap to se if it boots up (ahh... the old faithful as it used to be... yeah )

Rebuilds are fun and very rewarding, like pimping ya ride.
 

http://www.techspot.com/community/topics/new-mother-board-and-system.92848/
Relevancy 64.5%

Last night I tried Board Mother Replacement to replace the mother board on my Dell Inspiron e laptop I bought the replacement part Mother Board Replacement from an Ebay store and it is still under warranty days After taking apart my entire laptop and putting the whole thing back together--a job that took my friend and I three hours--we plugged it in for the moment of truth The battery light came on so far so Mother Board Replacement good Then we hit the power button and nothing happened Well almost nothing The machine appeared to turn on All three lights on the the bottom of the LCD went on but that s it The fan didn t start the monitor didn t start The hard drive light was on but didn t appear to be reading at all i e no blinking or noise I m quite perplexed Everything appeared to go back together perfectly with the possible exception of the diskette drive cable clip which we weren t exactly sure whether to put back in over under or through the disk drive data cable We eventually put it through For instructions and pictures of the process check out link http support dell com support edocs systems pblan removing htm Everything else seemed to go back together seemlessly We were very careful with screws and put all the right sizes back into their correct places What could be causing this Have I received a defective part Are there any other explanations I suppose a possible explanation is that the processor and or video board are not quite connected correctly but they seemed to fit perfectly and snap down firmly when we put it back together Please help nbsp

Relevancy 64.5%

Does the mother board battery that keeps the time affect the computer operation if it runs down?
 

Relevancy 64.5%

I have a asus a7v333 mother board. I have a windows 7 disk .It needs 64 bit cpu. Is there a mother board that will support a 64 bit cpu that will take the memory and other parts from the a7v333?
 

A:upgrade mother board

What CPU do you have?
 

https://forums.techguy.org/threads/upgrade-mother-board.1167413/
Relevancy 64.5%

Looking to get clarification on these motherboard headers:​
HD Audio link - assume this has to do with some available add on panel to receive high def audio - though I have Klipsch speakers and have previously used the green 'line out' -- Is there a way to get high def or used the digital audio jack? Does it take a pci card?

Front Panel Receiver (input) ?

Serial - what are these typically used for if there already exists a serial connector for the older hard drives?

Back Panel CR Emitter (output) ?

IEEE1394a ?

Note:​HD LEDI is connected but with an indicator on the case front for HD LEDII as well there seems to be no board connector. Is is possible to make the connection directly to the 2nd hard drive 2-pin connector and bypass the board?
 

A:mother board questions

HD LEEDII is used for a second connection to the controller. Some raid cards have this option [in fact my promise raid card has it] For you, just leave it unconnected.

IEEE1394 is firewire. With some boards they have a rear firewire connector AND one for a front of the case connection. If your case does not have this, leave it alone.

Serial ports are for old hardware that uses a serial connection. This would be something like a serial game pad, serial mouse, etc. There is no modern hardware that uses these ports so I often just disable them in the bios.

The audio link is most likely for a front panel audio. You can use this IF your case supports it.
 

https://forums.techguy.org/threads/mother-board-questions.771779/
Relevancy 64.5%

i can,t find out what my mother board make is.there's no markings on it!.
i need this so i can download the graphics driver because when i reformated it(second hand system)it will not let me change the screen size or number of colours.
is there a site that i can log on to that mite be able to help?
whats do you think?
cheers
lee
 

Relevancy 64.5%

Hey guys
i have a compaq presario SR1610NX Recently i shorted out my mother board while doing a proccessor trade out (trust me the proccessor is compatable as the computer did run for a while after the switch). anyway i called up compaq and they say that my mother board was discontinued and they tried to sell me a whole new tower. i need a compatible replacement. im using a AMD Athlon 64 3700 proccessor.
Please Help Me- Dr. Feelgood
 

Relevancy 64.5%

Hi,
am using windows 7 x64.
i had BSOD problem and found out the problem is mother boards ram slots and one of my ram is also malfunctioning.

After replacing with a new different mother board i am getting BSOD in startup.

i thought windows 7 will automatically accept the new chipset. Is there are any ways to prevent from reinstalling windows again ?

thank you.

Note : since the system is getting BSOD in the startup i couldn't get the dump file.

A:BSOD in New Mother Board, help !

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/129423-bsod-new-mother-board-help.html
Relevancy 64.5%

Okay, so me and my brother are planning on building a computer soon.

For the CPU, we chose to go with an AMD Athlon X2 64 6000+
GPU, and 8800GT, when we can get our hands on one of coarse.
For the cooling unit for the CPU, i had the ARCTIC COOLING Freezer 64 Pro 92mm suggested to me.
For the RAM we decided to go with http://www.newegg.com/Product/Product.aspx?Item=N82E16820145098.

I am still hacing problems choosing a mother board and PSU, it's been a long time since i've even swapped boards and PSU's out of cases. So i was wondering if anybody could suggest a good mother board for gaming. Preferably a more inexpensive board, but the price doesn't really matter that much. And also if someone could suggest a PSU, or has better suggestions for RAM and a cooling unit, that would help a lot.
 

A:help with picking mother board and PSU

First, spend the extra seven dollars and go with this RAM. It is faster than the RAM you picked out, and it is made by Corsair, one of the most trusted makers of memory.

As for a motherboard, you might want to consider this one. SLI-Ready, AM2 socket, DDR2 RAM, gigabit ethernet, relatively high customer reviews, and has then name ASUS, a respected motherboard maker. I narrowed down your choices on NewEgg to these ten, assuming you hope to set up SLI sometime.

I'm not entirely sure that your cooler will be sufficient. The cooler I use for my Athlon 6000+ is this Zalman 9700. It is three times more expensive, not to mention huge, but it does the job.
 

https://forums.techguy.org/threads/help-with-picking-mother-board-and-psu.657673/
Relevancy 64.5%

I have a mother board that went out. My question is if I replace the mother board with one that is not the same model as the one that malfunctioned will my system still function properly or will I have some errors/diffulties. I am running Windows XP on my machine.
To make the question clear will replacing the motherboard with a different model one cause my operating system any errors or will my system work properly. Thank you for answers in advanced
 

Relevancy 64.5%

I`m having trouble upgrading my mobo.I have an older p4 1.40 ghz standard type cpu.The original mobo is a ecs model925 v1.0 with fsb @400mhz Iwant to upgrade my video but this board only handles 4x agp.I have tried a pc chips p4 fsb800 model m981g and an abit v17 pt880 and both did the same thing-they powered up but did nothing else,no video,no dos not even a code beeb. With the abit i even upgraded to a 400w power supply.Right now I`m not sure but I believe i have a 300w supply installed. I guess my question is can I get a mobo-cpu combo,and if I do do i have to reinstall my hdd to this board.It is a hitachi deskstar 7k80 80gig 7200rpm.The vid card i have-want to use is an xfx nvidia gforce 5200 fx agp-8x ,any suggestions are welcome.
 

https://forums.techguy.org/threads/upgrading-mother-board.378113/
Relevancy 64.5%

ok i finally decided to ditch my old 478 socket mother board and of course im gonna toss my cpu and my ram too..i dont know much about mother boards or their specs

just recommend me a good board that can have a "dual core/core to due--->i would appreciate if u told me whats the difference?"

support AGP system coz theres no way im gonna change my video card

support for DDR3 memory and all new processors coz i have no intention to toss it again
 

https://forums.techguy.org/threads/buying-a-new-mother-board.602978/
Relevancy 64.5%

quick run down windows gigs ram mhz duel core amd labtop gig hd Toshiba c d Alright fast run down Safe mode is fast seems stable Normal windows with or with out any other programs its slow copying moving files slow can't open more then a few programs with out the computer freezing When I have one program running its like it takes all the ram and memory I can lets say download a program and browse the internet Also if I update or run virus scanner I can't do anything else Other issue Failing Mother be) (what Board it else could Some times computer won't boot up at all it locks up Reguardless of fixes my computer keeps updating the same files once I install them they either break the computer and I have to roll it back or it reupdates the same files over and over again Once I turned computer on computer did a update and my network adapater disipered My buddy thinks my mother Mother Board Failing (what else could it be) board and I remember when I tried get computer fixded they said same thing however the computer is so new I have had a few times where computer had power issue where cut out in middle Mother Board Failing (what else could it be) of a update and I have factory restored the computer once I forget why but computer wouldn't boot up at this point im just confused at times its running good though the not being able run mutiple programs or to multi task and slow copying is a constant problem I run windows firewall avast and microsoft essitiels Beside that I have run malware and auto run and yada yada I never found any problems beside registery issues and such I ran update fixes I have tried everything I can think of Options have not tried Factory reinstall following the link that person posted for clean install I have not tried that Checking the mother board sending computer be repaired somewhere I simply assume they would never fix it just tell me its my issue or nothing wrong SOOOO is there any way to figuer out what the real problem is A mother board testing program would be great to rule that out I havn't tried reinstalling windows again mainly because the computer Mother Board Failing (what else could it be) been running slow sense I did that last time Could motherboard account for issues with software like windows I dunno It works for what I need it for so long don't game or try multi task but its just frustrating never knowing if its going die or restart I can't shut it down because updates and that break it and all my restores have updates waiting install so any info be great

A:Mother Board Failing (what else could it be)

Seriously I have seen this post about 3 times in a few different places no matter where you post it will be the same answers my friend I'm saying this with all respect

I would just use the warrenty with Toshiba call there customer care explain to them what is going on I'm sure they can assign some kind of Tech or even a place you can take it for further inspection

Im very sorry that none of the answers given here helped you in anyway but you must understand if all else fails take it to the Manufatuer and have them look at the issues they would be the ONLY people or person's that could help you now

I would start calling Toshiba and start asking questions ASAP !

http://www.sevenforums.com/hardware-devices/224798-mother-board-failing-what-else-could.html
Relevancy 64.5%

I have an 845 chipset mb.I am a microcontroller developer,use parallel & serial ports.Yday i put a reverse polarity +5v on the parallel port(pin18) other pins were buffered.But since then,monitor wont start.No beep.Fan runs and 5v is present on mb.I removed RAM and checked.Tried with all external devices removed and checked.But no,it wont turn on. Is the video chip(realtek) fried?Do i need to replace mb?Please help!
 

https://forums.techguy.org/threads/is-my-mother-board-fried.646724/
Relevancy 64.5%

hey there! a few days ago, i was on my computer, when all of a sudden i get a freeze. i reboot. on the reboot, RIGHT away i get a black screen. not even a hardware check, or NETHING, just black( cant even get to bios). My monitor, even showed me a "no scource" warning. my mainboard is a asus P5nSLI. i took it apoart reasembled it, maybe somthing got out of place or somthing, same thing.....black screen not even a asus picture. just PURE black. i also have a router and when my network cable is plugged in my motherboard, the LED on the router, doesnt show that it has connection, with my comp. it hasss to be my motherboard, im geussing. dos ne1 have ne good ideas, to be %100 sure to find the problem here!!!!!!

ne help at all will be GREATLY apreciated!!

thanks alloot!!!!!!!!!!
 

A:Is My Mother Board Fried??????

From the information you supplied, most likely you have either a bad main board or a bad power supply. I recommend you test the power supply with a power supply tester. In the absence of a tester, you can try a known-good power supply or take the power supply to a shop that can test it for you.
 

https://forums.techguy.org/threads/is-my-mother-board-fried.645107/
Relevancy 64.5%

Dear Friend,
I have found a trouble in my computer that when I start my computer it shows a window about my mother board then goes to windows

I hate this "mother board window", and it takes time too...please give me a tip to avoid it ...


waiting for your reply

Irsath

http://www.techsupportforum.com/forums/f10/mother-board-window-199956.html
Relevancy 64.5%

I inadvertantly fried my motherboard by plugging a usb device into a usb port upside down. (the little white piece had fallen out of the usb port which allows usb cables to plugged in only one way). My question is - if a motherboard shorts out does that mean that my processor, sound card, etc are also toast? I will replace just the motherboard if that is all that is bad, but if I have to replace the processor, sound card, etc then I might as well buy a new pc. Is there any way to test the processors and sound cards to see if they still work? Thanks for your help in advance.
Ray
 

Relevancy 64.5%

well it looks like my nforce 4 chip broke somehow, and now i need a new mother board. It needs to be a 939 socket, and i do prefer the nforce 4 chip set, but if you know of a better one please let me know.

Thanks
 

Relevancy 64.5%

i have a laptop where the power connector has snapped off and is unrepairable the problem is i am struggling to find system board has any one come across a make called hi-grade model no green553 could possibly be a rebadged one so if any one knows who makes them or deals with them i would love to hear from you

many thanks
 

A:laptop mother board

http://search.stores.ebay.com/CKnap...opZ1QQftsZ2QQsaselZ54951843QQsofpZ0QQxZ0QQyZ0 You might try contacting this group. They may have some connections or ideas. An email can't hurt. Jazz
 

https://forums.techguy.org/threads/laptop-mother-board.690450/
Relevancy 64.5%

So, my girlfriend fried her old processer and just recieved a new one. We got everything installed and working into her case, everything works, except when we try too boot windows (XP pro), we get this error.

"A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow whese steps:

Check for viruses on your computer. Remove and newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and than restart your computer.

Technical information:

*** STOP: 0x0000007B (0xFA0940, 0xc0000034, 0x00000000, 0x00000000)"

I would like too thank anyone in advance for any help they give. Thank you very much!
 

A:New mother board, processer, and fan.

http://support.microsoft.com/default.aspx?scid=kb;en-us;324103
 

https://forums.techguy.org/threads/new-mother-board-processer-and-fan.484659/
Relevancy 64.5%

Hello,

I have a 701 mhz processor amd. Can I upgrade my processor to something faster in a az11 mother board?

Thanks!
 

A:Az11 mother board

Motherboard specs: http://www.fic.com.tw/product/motherboard/1stmainboard_detail.aspx?type=legacy&model_id=2

Compatibility test: http://www.fic.com.tw/support/motherboard/document.aspx?model_id=2

Looks like a 1.1Ghz Athlon on the 100Mhz FSb (200Mhz effective bus) It wouldn't be much of an upgrade.
 

https://forums.techguy.org/threads/az11-mother-board.311920/
Relevancy 64.5%

hi i upgraded my computer to 640 MB RAM and 1ghz Processor (P3)

i want to buy new motherboard that will be compatible with my ram which is PC133 166PiN. Also can carry any Processors and Max Gfx. Please thankzzz
Can you giv me some Links from ebay or somewere
 

Relevancy 64.5%

can anyone find me the driver for ma motherboard(vga driver).i am using P5GC-MX/1333

A:mother board drivers

i am also having the same prob .. i didnt find any drivers for ma motherboard ..sameone p5gc-mx/1333. i checked in asus site also .. no solution .. pls help me ..

http://www.sevenforums.com/drivers/33748-mother-board-drivers.html
Relevancy 64.5%

hey all,

Im new to these forums, names Michael, 18 and living in the UK

Currently my computer has got 1x 512mb DDR PC2700 at 333mhz. But i want to get 2x512mb to make 1GB of RAM.

But can i get a memory stick that has a clock of 400mhz? Im not too sure though, or do i have to replace the orignal with another 400mhz.

Click on the link to see my mother boards specs.

http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=1913&ProductName=GA-8S661GXMP
 

A:Mother Board Confusion!

<Encrypted> said:

hey all,

Im new to these forums, names Michael, 18 and living in the UK

Currently my computer has got 1x 512mb DDR PC2700 at 333mhz. But i want to get 2x512mb to make 1GB of RAM.

But can i get a memory stick that has a clock of 400mhz? Im not too sure though, or do i have to replace the orignal with another 400mhz.

Click on the link to see my mother boards specs.

http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=1913&ProductName=GA-8S661GXMPClick to expand...

Hi if the given number of your motherboard is correct then it would definitely support 400 mhz frequency of ram just click on the link you sent and check 2nd point in the 6 point description of the specifications of the motherboard.And regarding having sticks of 2 different frequencies there might be a compatibility issue.
 

https://forums.techguy.org/threads/mother-board-confusion.562727/
Relevancy 64.5%

ok i have a gigabyte ga-ma69gm-s2h... and an amd opteron processor the 2.4 model 1216 and it says does not support... does that mean my **** isnt compatible? or can i just go for it neways
 

A:gigabyte mother board

there is the compatible CPU list for ur mobo:

http://es.giga-byte.com/products/mb/cpulist/ga-ma69gm-s2h_10.html

and as U can see the only opteron supported is the 1210 not ur 1216
 

http://www.techspot.com/community/topics/gigabyte-mother-board.87273/
Relevancy 64.5%

Any1 know when this Mother Board comes out??? Release Date???
The Abit A8N SLI......................

http://www.abit-usa.com/products/mb/techspec.php?categories=1&model=246
Thanks,
~Da Bob~
 

Relevancy 64.5%

I have just changed the motherboard and processor on my second computer and when trying to boot up it starts but shuts down after a very short time. I have put in a 500watt atx power supply to replace the 300watt that was in the computer originally but it is still shutting down. Any ideas please.The motherboard is Asus A7S8X-MX and the Processor is AMD Sempron 2300+.
 

Relevancy 64.5%

i am putting a new motherboard and processor in my system will i have to reinstall win xp or will it pick up the hardware from the old board?
 

Relevancy 64.5%

hi can any one help me i need the pin out for a winfast K8S760MG motherboard to tower ie, pwr /reset and all the little plugs many thanks best regards lenny.
 

A:Help with mother board pin outs

Link to Manual

http://www.foxconnchannel.com/support/downloads.aspx

Chek it's the right suffix...
 

http://www.techspot.com/community/topics/help-with-mother-board-pin-outs.91385/