Windows Support Forum

PCI data acquisition and signal processing controller

Q: PCI data acquisition and signal processing controller

I've installed win 8.1x64 on my HP Notebook - 15-AY080NIA - (X5Y74EA) but I am missing the PCI Data Acquisition and Signal Processing Controller driver. Kindly Help me....

Relevancy 100%
Preferred Solution: PCI data acquisition and signal processing controller

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 21.5%

I've said time and time again that solid state drives are the future but the truth of the matter is, traditional spinning disks still have a place inside a modern PC as a storage / backup drive. The question then becomes,...

Read more
 

A:Latest hard drive reliability data reveals it may be best to avoid 3TB drives

Well I'm glad I have never bought a Seagate HD. I usually buy Western Digital, except my SSD is Samsung.
 

http://www.techspot.com/community/topics/latest-hard-drive-reliability-data-reveals-it-may-be-best-to-avoid-3tb-drives.208285/
Relevancy 27.95%

Hi guys I'm wondering if you can help me,

I just bought a new R9 280 to replace my HD 5830.

I installed it properly and there was no video output to my monitor.

The 5830 is now back in and everything is fine so not sure what's going on.

I've tried using the vga slot instead of HDMI on the R9 280 and there's still no output.
 

A:New R9 280 with no monitor signal

Try to change the power supply...
 

http://www.techspot.com/community/topics/new-r9-280-with-no-monitor-signal.212523/
Relevancy 21.93%

Hi all,

My friend's USB flash memory has data (its drive shows that there is data in it) but when I double click on it to open it and see the contents, it doesn't show any folders and files! I did the following works:

1- I scanned it by my updated kaspersky AV. but no threat found
2- Scanned by windows defender tool. same result!
3- scanned by malwarebytes anti-malware. same.
4- cmd (run as administrator) -> go to its drive (e.g., H:, when H is my flash drive) and typing the attarib -s -h *.* /s /d command. It could not to show the data.

All my attempts faced failure till now.

Can anyone help me please?
 

A:USB flash memory has data but doesn't show the contents

Salam
Go to cmd (run as administrator) -> go to its drive (e.g. H: where H is my flash drive) and type the attrib -s -h *.* /s /d
Now flash will show the data.
Your attrib spelling was wrong correct them
Try it.
 

http://www.techspot.com/community/topics/usb-flash-memory-has-data-but-doesnt-show-the-contents.193421/
Relevancy 26.66%

Hi,

Hope someone can help me with this. I am running Win 7 on a P5Q motherboard and everything was working fine until I added another HD to my system. I have a 500gb HD already installed, but recently added an 80GB HD. My problem is that when I start up my computer from cold it hangs at the boot screen on " initializing USB Controller". After I reboot several times it will eventually start, but sometimes I have to run the windows repair program to get it to boot. Would this be because of an issue with the added HD or something else causing it. Any help would be appreciated...

Thanks,

Verity
 

A:USB controller initializing

Are you using the second drive as a slave?
 

http://www.techspot.com/community/topics/usb-controller-initializing.177003/
Relevancy 26.66%

Hi there,

I am not sure how to ask this properly but basically I have a laptop pad controller (AKAI LPD8), normally used for controlling midi. I would like to use this device to control my shortcuts in foobar2000. The problem is that the program does not really like my controller. When I check the device manager, I saw that my controller is seen as "audio device". Is there any way to make computer see the device as another input device like a keyboard? If I can manage to make controller act like a keyboard I think I can handle the rest, is this possible?

Thanks for your helps in advance!
 

A:Using pad controller as a second keyboard

Okay, if anyone else look for it I've found the solution:
for mac: http://www.charlie-roberts.com/midiStroke/
and for windows http://www.bome.com/products/miditranslator/overview/classic
 

http://www.techspot.com/community/topics/using-pad-controller-as-a-second-keyboard.209081/
Relevancy 22.36%

This laptop will not save documents or files to the hard drive. They are there when initially saved, but disappear when the system is next switched on.

Anyone help me pls...
 

A:Laptop Fail to save any data to harddisk

You need to say whether you are new to computers or not and which Windows operating system you have. I remember when we first got a computer many years ago the wife thought that I'd deleted her work. In fact we didn't know whereabouts it was saved and couldn't find our way around. If you are a beginner using Windows 7 try clicking on the Start button and then Documents in the menu that opens to the right. By default that's where things are saved but you can use the Save As option and choose a different location.
 

http://www.techspot.com/community/topics/laptop-fail-to-save-any-data-to-harddisk.208753/
Relevancy 28.38%

Hi,
I'm getting the 2 D-Sub No Signal Message and then the screen goes blank
I tried the same cable to connect a laptop to the monitor and that works fine.
I then swapped out the graphics card for another and get the 2 D-Sub message again.
Someone please help!!
 

http://www.techspot.com/community/topics/2-d-sub-no-signal.208642/
Relevancy 27.09%

I have a window's 8 laptop. It is about a year old. A few months ago it just suddenly stopped getting a strong wifi signal in my room. The wireless router is in the other room. I assumed that it was just our router, a belkin, and started using an ethernet cable rather then replace it. However, I am visiting my girlfriend and the router is in her room. I took my laptop to the other room and suddenly I only have one bar of connection and nothing will load, like it does at my house. Even sitting right next to the modem get 3 to 4 bar signal strength. I have no idea what to do. I have ran virus checks and malware checks. Nothing turned up. I tried checking to see if my wireless driver needed to be updated but it says that it's up to date and functioning properly, which clearly it isn't. My wireless driver is qualcomm atheros ar9485 802.11. Please help.
 

http://www.techspot.com/community/topics/my-laptop-wont-pick-up-a-strong-wifi-signal.205616/
Relevancy 22.36%

Hello all,
Windows 7 doesn't recognize my SSD drive. When I go to disk management, it shows a message to initialize it (image no.1) but when I press OK to do that, one another message appears and says: Data error cyclic redundancy check (image no.2). My computer windows doesn't show that drive and also when I went to cmd->diskpart, again it didn't show that disk to use of chkdsk /f command. How to solve the problem please?
 

A:Data error cyclic redundancy check ssd

I could to revive that disk in diskpart using PartedMagic in boot. I've uploaded a new image from that. The remained problem here is that I can't delete it there.
 

http://www.techspot.com/community/topics/data-error-cyclic-redundancy-check-ssd.204783/
Relevancy 26.23%

Hello:

I know there are a million of these posts however, I couldn't find my specific problem. I have an Xbox 360 wireless controller connected to my PC. Normally the light indicating 1 is light. This lasts for about 5 seconds. Then the light for controller 4 lights at the same time and then 2 and 3 and then 1 and 4 and so on (this happens very quickly). During all this time the controller works fine. Except that every once in a while it disconnects (no lights). Pressing the xbox button inmediately connects it again but is very annoying.

Any help what might be the issue? Also, it worked fine before. Ive just stopped using it for a while and when I went to use again, the problem started.

Thanks for any help.
 

http://www.techspot.com/community/topics/xbox-360-wireless-controller-disconnects-from-pc.204770/
Relevancy 22.36%

My bother had deleted my laptop partition files and folders when attempting to extend my C partition. All my stored partition movies were lost and could not be found in Recycle Bin. Do you know where these partition videos are? I really want to view these videos again. What can I do to rescue them? Thank you for any advice!
 

A:Delete hard drive partition data

Hey, Luminaton03!

Sorry to hear you are experiencing such an issue.
Your data is stilll there somewhere as long as you don't overwrite it. If you save new data, it would rewrite your previous files.
I did some research for you and I found a threat that you might find helpful:
http://answers.microsoft.com/en-us/...back-the/a003d747-b760-42a7-819b-0235e8ec6d2c

I really hope this works for you!
Good luck!

SuperSoph_WD
 

http://www.techspot.com/community/topics/delete-hard-drive-partition-data.204583/
Relevancy 21.07%

I have a sony SD Card 16gb class 4 card. I did use the card for almost 3 months, when I tried to use it now, I am not able to access the card,





I tried recovery softwares like recova etc to recover the file, but I was not able to recover even a single byte.

I have many importants files in the CARD, PLEASE HELP ME...,.

Thanks
 

A:Data recovery SD Card not accessible, says incorrect function showing unknown format

I think >>this thread<< could help you out . He seems to have the same problem.
 

http://www.techspot.com/community/topics/data-recovery-sd-card-not-accessible-says-incorrect-function-showing-unknown-format.201611/
Relevancy 22.36%

Hello,

Is there any difference between software which are used for recovering data from HDD or flash memory drives and SSD? For example, can we use of the apps used for HDD to recover data from SSD too?
 

A:Solid state drive data returning

I do not see why the HDD programs shouldn't work for SSDs. Maybe @jobeard can weigh in if I am wrong. I would check out this article.
 

http://www.techspot.com/community/topics/solid-state-drive-data-returning.204388/
Relevancy 27.95%

Sorry for that long title. Anyway, I was watching some YouTube videos when my wi-fi suddenly stopped worked. With this, I don't mean that I'm not catching signal from my router. I mean that my computer isn't receiving signal from any network. I don't know anyway to fix this, it never happened. I also won't buy a new computer. I got this on Christmas and I think that 7 months isn't that old. Also, the only tutorial I found doesn't applies to my computer (It was for a mac ). I have no idea of how to fix this and if you know, PLEASE HELP ME!!!!!! (If you are curious of how I am posting this, it works with Ethernet connection)
It's an ASUS computer with Windows 8.
 

A:My Computer Isn't getting signal from any Wi-Fi Network

Give the following a try and see if it helps:
Go to network sharing center - change adapter setting - click on wifi and then Diagnose this connection.

If this does not help, please let us know and we can suggest something else to try.
 

http://www.techspot.com/community/topics/my-computer-isnt-getting-signal-from-any-wi-fi-network.203822/
Relevancy 22.36%

Whenever I connect my Hard-disk to laptop, my laptop slows down and am not able to open the hard-disk folder. Am not able to access my data in it. As soon as I disconnect the Hard disk, laptop gets back to normal. Can anyone please help with the issue ?
 

A:Recover Data from Damaged Harddisk

If it's physically damaged, nothing you can do it in your own. You need to consult it to a professional unless you have knowledge and experience on some DIY hard drive repair.
 

http://www.techspot.com/community/topics/recover-data-from-damaged-harddisk.202712/
Relevancy 22.36%

Okay not really very good at this but my laptop stopped working so I took hd out and connected it to anotherlaptop through usb lead it appears in my disk management (although it shows up grey instead of black or blue if that makes sense to anyone) but it wont show in my computer I have a load od family photos on this drive and would really love some help and will send out good karma to all who try to help me many thanks in advance
 

A:Trying to recover data from crashed hard drive

Hi techmichellenot. When you say it stopped working,is there anything on the screen when you power up, or any indication that the system passed it's POST procedure (Power On Self Test), usually indicated by a beep before Windows itself tries to boot up?. Any error messages seen?. Sounds like you put the drive in an external case that can connect via USB. If there is indeed a problem with the disk drive and it's not a physical problem with the drive (maybe a corrupted Windows boot file,etc),your system may have a Recovery procedure that will reinstall your OS without erasing your data files (called a non destructive OS reinstall) as opposed to a destructive which erases everything and reinstalls the OS. I would check your documentation to see if your laptop has such a procedure.
 

http://www.techspot.com/community/topics/trying-to-recover-data-from-crashed-hard-drive.189487/
Relevancy 22.36%

Hi,

My internal HDD failed due to a sudden power outage. I can hear beeping sounds like the motor is trying to spin the drive up and failing to do so. This drive contains all my important data ( documents, photos and videos), I'm thinking of taking it to a data recovery center, How much would it cost me for a data recovery service? I've been recommended to WeRecoverData data recovery labs by an IT person, Anyone have experience with them? Any help advice? Thanks in advance.
 

A:HDD beeping. What's the best data recovery option?

Likely thousands. Hopefully in the future you will make backups of important data.

If it was killed by the power outage, you can probably fix it yourself by purchasing the exact same drive on ebay or wherever and swap the PCB.
 

http://www.techspot.com/community/topics/hdd-beeping-whats-the-best-data-recovery-option.201578/
Relevancy 25.37%

Hello, I'm new here. I'm trying to fix my sons Asus laptop. it won't connect wirelessly but will connect via ethernet cable. device manager has exclamation point beside network controller. I cannot download drivers for it. can you help?
 

A:Asus X53E network controller issue/no wireless

"I cannot download drivers for it"... Why? Can you get the driver from here:
http://support.asus.com/download.aspx?SLanguage=en&p=3&s=114&m=X53E&os=&hashedid=mDFYFQWEpTitMwA6
If the driver won't install, the Wifi card may be bad... Something that doesn't happen very often
 

http://www.techspot.com/community/topics/asus-x53e-network-controller-issue-no-wireless.201175/
Relevancy 22.79%

My house was hit by lightening a few years ago and it fried my computers- so I very quickly went out and bought a WD g mybook external hard drive which I have everything stored on Please keep in mind I am not an expert by any means and do not have a lot of experience with these types of things other than simple computer installs ect but I would not consider myself a beginner I am just desperate to recover my files without having to pay someone to try to do it for me A few weeks ago my computer simply me a WD MyBook off Help my get data stopped recognizing it was there When I would power it off or on or reset it it would attempt to load but the blue light would constantly blink First think I did was try a new USB cord which changed nothing- I also have tried it on three different computers- Nothing I read about taking the hard drive out of the casing yes I realize it voids any warranty but at this point I am more concerned with my data than getting any sort of a replacement so I carefully removed it- I put it in my computer hooked up to a SATA drive- It did not show up in Help me get my data off a WD MyBook Disk management or under my computer I went into BIOS and did see a removable disk but if I set it as boot priority obviously it would not work- I do not know if there was something else I should have done to get it to work in BIOS I then hooked it into another computer where I have a second hard drive- Took mine out and put this one in its place since I know that I am able to access my second hard drive on this computer- It simply didnt show up I then took it to Best Buy- And they informed it that the hard drive was trash- That her machine would not even get it to power up at all that data recovery was not even possible and I should throw the hard drive away and start over I took it to another computer store who told me they could send it out and attempt data recovery at the tune of I brought the drive home- Hooked back up the USB board and plugged it back in as if it was again a external- It turned on- light begin to blink as before- but I can also hear and feel it spinning- I am not hearing any strange sounds nothing sound loose inside it just sounds like it spins for a few minutes then stops- and that light constantly blinks I then read online that someone mentioned that with these they often have an encryption built in to the usb connection which makes it so the hard drive will not power up as an internal hard drive or without that usb board on it Anyone know if there is truth to that I am desperate to get this to function so I can get my files off of it- Please if anyone has any ideas what I can do please share Thank you in advance- Brooke nbsp

A:Help me get my data off a WD MyBook

I don't know anything that'll help you, sorry.

But here's your step#1 problem: My house was hit by lightening a few years ago and it fried my computers- so I very quickly went out and bought a WD 500g mybook external hard drive which I have everything stored on.

If your computers get fried, an external HDD will also probably get fried. Remember, having a backup means having a minimum of three copies (original, 'backup', long-term storage backup).
 

http://www.techspot.com/community/topics/help-me-get-my-data-off-a-wd-mybook.192963/
Relevancy 22.79%

Friends and neighbors, last March I had such a system crash that, due to the number of bad HD sectors, I had to replace the HD. The HD with my various tools was not even detectable. My system ran Windows 7 64-Bit and IE9. The computer is an MSI notebook. Anyway, while doing some searching to diagnose another problem, I registered for this site after seeing Puppy Linux, whose page I saved to my Favorites. Having kept the old HD, in case I could salvage any data, is it possible for me to use Puppy Linux on that old HD? Thanks. Your answers will be a great help.
 

A:Data Recovery Possible?

Hey Louis. We don't know how bad the drive is, but you can try putting the drive in a USB enclosure, formatting it, then install Puppy Linux on it, since apparently Puppy Linux doesn't require a lot of space and can also be run from RAM according to the Wikipedia link.

http://en.wikipedia.org/wiki/Puppy_Linux
 

http://www.techspot.com/community/topics/data-recovery-possible.200262/
Relevancy 21.93%

So... like most of world my family lives online. Having found that ISP pricing in Alaska is horrendously expensive, I want to find a solution that I can create 4 SSIDs, one for each of my three kids (ages 12, 14, &16) and one for me and my wife, and place a data cap on each SSID so that I can't be hit up with the bills that come with overages. I figure with individual SSIDs they can use what ever device they have with out having to detirmine MAC addresses or IPs used or any of that other stuff.

I would like to have just one router be able to accomplish this. I have an older router, an Apple Time Capsule I bought about 6 years ago, but as I don't use Macintosh computers any more, I would be happy to buy a new router and get it set up to manage this dilema.

Any Advice or suggestions will be greatly appreciated.

Thanks.
 

http://www.techspot.com/community/topics/router-and-networking-multiple-ssids-and-data-cap-per-ssid.200229/
Relevancy 22.36%

You saved an old hard drive (or three) from previous computers and now you?d like to get at the data on them. Is there an easy way to access the data without cracking open your current computer and mounting the hard drives inside?

Read more
 

A:How to Get Data Off an Old Hard Drive (Without Putting It in a PC)

very good. I was trying to explain this to someone. Now I think I will just send then the Web Page.
 

http://www.techspot.com/community/topics/how-to-get-data-off-an-old-hard-drive-without-putting-it-in-a-pc.200129/
Relevancy 22.79%

I burned 1 GB of info in a DVD-R disc. Computer could read it perfectly and said 1 GB was recorded and 3 GB still free available for more data.
Next day I tried to add more data, 0.5 GB in a folder. All was OK, I dragged folder to DVD and PC said it was doing the job, after 2 minutes said folder was ready to be burnt. But the previous folders did not appear. I quit burning and tried to check the information on DVD. right- clicked properties and PC says it has 1 GB of data burnt and 3 GB available. But if I try to read the information I had burnt before, nothing, no files or folders.
May I still recover the 1.0 GB recorded first day? HOw?
 

A:DVD-R with 1 GB info but data is missing

When burning multiple sessions to a DVD-R disk, if the sessions are not left open or closed improperly, then it can "lose" data or make the entire disk worthless. As for recovering data from a DVD-R or any optical disk, for all intents & purposes it's a lost cause, it's not impossible, but it would cost out the wazoo and the likelihood of recovery is slim.
As cheap as DVD-R disks are, don't burn multiple sessions, just burn once and be done with it.

Hope this helps, take care!
 

http://www.techspot.com/community/topics/dvd-r-with-1-gb-info-but-data-is-missing.198267/
Relevancy 27.52%

My phone( T-Mobile Samsung Galaxy SII ) always losing connection maybe because I am living at the edge of the signal coverage. Battery get eaten very fast because of weak signal strength. It is still manage to last over one day with my mpj extended battery though, I have to reboot frequently just to get connected. How can I boost the signal enough for it to work consistently? Please help and thank you millions in advanced.
 

http://www.techspot.com/community/topics/signal-not-enough-for-my-phone-works-consistently.199123/
Relevancy 26.23%

Wondering if anyone has experience with the Areca ARC-1231ML controller.

I am thinking about picking up one on the cheap on Ebay to try out Areca.

If so, what sort of benchmarks are you getting? Any quirks? Anything anyone really likes or dislikes about this controller? What cache size are you using?

Thanks for any thoughts.
 

A:Areca ARC-1231ML - Anyone have experience with this controller?

I just purchased one from ebay. While I don't have much conclusive benchmark data to give you I can tell you that adding this card to your PC will increase your Boot time by at least 60 seconds. Another 30s if an array is not done initializing.. So far this is the only thing that has annoyed me. I understand that these cards are generally not for an everyday computer like I'm using it for and if used in a server this point becomes pretty insignificant.

I made a RAID 0 setup and was able to make a sustained write from a SSD of about 256 MB/s

I am also making a RAID 10 array with 4- 2TB drives. (Total space of 4TB after it's done) ..currently at ~30% done initializing after 5 hours.

Areca's website is pretty good...it took a little while to find the manual and some of the supporting information to allow me to login to the card over the web interface. I would say that it is not too clunky and seems to make sense. The manual will help a lot in understanding the capabilities.

The card I bought had the backup battery and 2GB stick of RAM.

One of the main reasons that I liked this card was the good reviews and the fact that it has provisions for allowing the HDD hooked up to go into a powersave/slower rpm/sleep state. This save on your drives always spinning at max rpm when the power is applied.

I will end this post with the fact that I'm not an expert in RAID and I was in the same boat as you...looking to get into hardware RAID setup and after much research found
this card to have the best features for the amount of $ spent.

I hope that gives you some food for thought. Good luck in your decision.
 

http://www.techspot.com/community/topics/areca-arc-1231ml-anyone-have-experience-with-this-controller.197086/
Relevancy 27.95%

I need to extend my signal on my router. It is not going as far as I need. The place where I need it has an Ethernet port in the room but I would need to be able to wire from the piece of equipment that I decide to use there. It would probably best be a router unless an access point can have ports to hook up to additional equipment in the room that I already use. I know it is best to stay with the same brand and my router is NETGEAR DGN3500. Can anyone tell me what they would use? Thanks.
 

A:What would you recommend to extend my wi fi signal

Best to use either Wireless Access Point or Wireless Router (disable DHCP,VPN, SPI and NAT)

Example #1 using two Wireless Routers (note interwebs = modem)


Example #2 Using Wireless Router with Wireless Client Bridge with Wireless Access Point


There are also PowerLine Wireless (one box connects to our router lan port) uses AC power


These are the options you can use or just use Access Point which has Wireless features. That would connect to your Router as shown in the first example. Port 1 goes into the single port of Access Points to extend your Wireless where the room is not getting enough single to it.

Your model is also ADSL modem and router all you need to buy is either Powerline set or AP (Wireless Access Point) which has wired LAN connection port.
 

http://www.techspot.com/community/topics/what-would-you-recommend-to-extend-my-wi-fi-signal.196002/
Relevancy 26.23%

Is it possible to fan Cosmos 2 controller? Controlling with H100i Rad control the radiator fans from the h i using the cosmos fan control interface The Controlling H100i Rad with Cosmos 2 fan controller? h i fans connect directly to the pump and use some kind of software to adjust there speed However I don t want software I want to control it with a physical button that is offered on my cosmos case the problem I am encountering is that the fans on the rad use four pins but the fan controller supports only pin fans I would replace the fans with the new one I got from corsair since they are three pins but they are made for airflow not pressure and it means I would not be able to use the speed adjust on the fans I replaced it with Would a simple converter from pins to three pins do the job If this works is there a cable to fuse two four pins into a single three pin Also by ignoring the software corsair provides the pump is not going to stop running right there is an additional single pin conected into a three pin header on the board in form of a three pin Only has single pin though however there is also a sata power connector connected directly to the pump along side the single pin nbsp

A:Controlling H100i Rad with Cosmos 2 fan controller?

As for the fan controller, yes a simple 4 to 3 pin converter will work and still allow you to control the H100i fans very easily and with no problems. Now with the software on the H100i, that's a different story, though your pump is not going to stop running just because the fans are not hooked into it. However, the system may point a warning saying the fans are not hooked up, but that should be your only issue and you can just ignore it.
 

http://www.techspot.com/community/topics/controlling-h100i-rad-with-cosmos-2-fan-controller.196277/
Relevancy 27.09%

Hi, I've been away camping for a couple of weeks and now that I'm back my desktop computer no longer connects to the internet. As I state in the title, however; the signal strength says it's "very good".

I've tried removing the connection and re-adding it, I've tried moving the wireless USB/removing and potential disturbances, but to no avail.

Any help would be much appreciated!
 

A:Signal strength: Very good, Access: Limited connectivity

Turn off the Modem
Turn off the Router
Turn off the PC
Turn off all network gear

Do this for 30 seconds.

Then slowly turn on the modem (DSL or Cable)
Then the router
Any switches
Then the PC
Then the rest of your network.
 

http://www.techspot.com/community/topics/signal-strength-very-good-access-limited-connectivity.195843/
Relevancy 19.35%

This could sound confusing but please bare with me So I had a TB HD Sata with win I took it out and used a new SSD which I put Win on Then I hooked up a TB HD Sata as Storage Simple so far right Well now I want to get my documents Bookmarks etc off the quot OLD quot drive I figured simple like with IDE HD s but no When I hook it up as the only drive I get this message EFI Shell Version Current get do How main off Hard Data My Drive? I "former" running mode Map Cannot find required map name Press Esc in seconds to skip startup nsh any other key to continue shell id gt When I hook it up as the second How do I get Data off My "former" main Hard Drive? drive After the SSD the drive doesn t show up I tried to put it in another PC by itself but it said something like it wasn t the disk for that PC Someone please tell me there is an easy way around this I googled a bunch of stuff and tried a few things with no luck I m hoping I m just frustrated and missing the obvious Thanks for any help nbsp

A:How do I get Data off My "former" main Hard Drive?

How about unplugging ssd plug old drive back in then transfer stuff to ur 2tb once done unplug old and replug ssd ?
 

http://www.techspot.com/community/topics/how-do-i-get-data-off-my-former-main-hard-drive.194502/
Relevancy 22.36%

I was curious if anyone who has Spotify Premium and uses it regularly on their smartphone could tell me approximately how much their monthly data usage is. I was planning on getting 4GB and was curious if this would be enough with using Spotify.

Thanks
 

http://www.techspot.com/community/topics/data-usage-with-spotify-premium.195235/
Relevancy 22.79%

I have an old laptop HDD (I think it's out of a Dell Latitudes laptop) and I need to access data off of it. I have an SATA/IDE to USB adaptor that I've used successfully several times in this type of situation. However, this particular drive won't respond when I hook it up. It just doesn't spin. I took it to a computer shop to see if they could help me, but they weren't able to get it going.
My thinking is, if I was a bad guy and the F.B.I. confiscated this drive, how would they get info off of it? There must be a way. Any thoughts?
 

A:Data Extraction

Buy the exact same drive on ebay. If the drive isn't spinning up it is a board issue (or a HORRIBLE spinny failure). So, get the exact same drive from ebay or somewhere else, and swap out the PCB. Problem solved.
 

http://www.techspot.com/community/topics/data-extraction.194776/
Relevancy 27.95%

I have a wireless ubee modem. I have had it for a will now and it has worked great up until yesterday. I can't find my wireless signal for my internet. I can hook up the usb port and get the internet just fine, but when I turn to wireless I can't even find my wireless signal name to hook up. I know my laptop is still getting signals because my modem is still finding my neighbors signals. Please help!!!
 

A:Lost My Internet Signal

Are you using someone else internet service via WiFi? If your now they power cycle the internet modem and your wireless laptop. Power cycle means reboot them or power them down then power them up. Internet modem can be reset but you would need to call your ISP and let them send a signal to hit the box (reset it) or walk you through the steps to do it on your end.
 

http://www.techspot.com/community/topics/lost-my-internet-signal.194378/
Relevancy 27.09%

Hello Thanks for reading and I know this problem has been on here one too many times but im just very curious as to asking these certain questions before progressing onto what I think I should do My problem is that I New signal. Card. nonfunctional No Mouse and Keyboard recently bought a HIS IceQ mainly for the cooling system it comes with Now I had installed it carefully no static shocks nothing like that into my PC Now when I boot it up I get no signal and my keyboard and mouse are New Card. No signal. Keyboard and Mouse nonfunctional getting NO power at all Now the curious part my pc came with a HD Thats it No VGA output on my motherboard Which makes me think do I need to change something in BIOS Does my PC only detect that because it came with it And yes I plugged in the PCIe power connecters too Now to what I think I should do based on reading through the forums Cmos Reset New PSU And thats basically it Here is a detailed Spec list Name HPE Phoenix HD gb DDR AMD FX Ghz x Ram DDR ThermalTake TR w PSU Motherboard is a Gigabyte AC model BIOS is AMI Ang TB hardrive ANY help is very much appreciated Ive been on this problem for a while now Thanks nbsp

A:New Card. No signal. Keyboard and Mouse nonfunctional

Sounds like a bad connection somewhere. Make sure everything is properly fitted and in the right place. When you replaced the GPU - Is that the only component you unplugged and removed? Try putting in the old card to see if it works. If it does, you could have a bad GPU.
 

http://www.techspot.com/community/topics/new-card-no-signal-keyboard-and-mouse-nonfunctional.194212/
Relevancy 27.95%

I can play all my games fine with no issues except Word of Warplanes and APB Reloaded When I do try to play those games I get all the way to the lobby then the monitor goes black and says no signal PC Specs OS Win Ultimate bit Motherboard ASUS M A R Processor AMD Zambezi GHz Quad core RAM Patriot Intel Extreme Masters GB x GB DDR Graphics Card XFX Radeon R PSU Ultra X W modular Monitor HP m I have updated everything I could find cleaned everything I could hardware virus malware spyware etc As far as I know these are the only games it fails with and im pretty sure its not the PSU because I hooked a W I had to just the video card and it still happens I out signal Blacks Monitor Saying No have attached my Dxdiag I have ran memtest with no errors just did a clean install of win PLEASE HELP it seems as if I am out of options nbsp

A:Monitor Blacks out Saying No signal

I have recently did a stress test on my GPU using FurMark no issues. GPU didn't get over 73c and no black outs.
 

http://www.techspot.com/community/topics/monitor-blacks-out-saying-no-signal.193189/
Relevancy 22.36%

I have lost my important and personal data on my SD card. As I tried to connect it to my Mac, it was asked to format, and I pressed it. So, now, all the data is lost. But, I know the lost data after formatting is not actually erased. It is still there and becomes inaccessible. Therefore, could you help me get it back? Any idea could be appreciated. Thank you!
 

A:How to get back data from a formatted SD card on Mac?

Hmm as far as my knowledge goes, you cannot, I think mostly every website that offers to 'recover' any type of format is a virus in waiting, as for software goes you may wish for someone with more knowledge, the only safe way I can think of is expensive.

Data recovery is not always 100% so take into account you may pay and not get anything in return,
http://stellardatarecovery.co.uk/ Unsure they do SD or not, but it's more likely best to find one yourself so I cannot be held liable!

Hope this helped!
 

http://www.techspot.com/community/topics/how-to-get-back-data-from-a-formatted-sd-card-on-mac.193375/
Relevancy 21.93%

Objects available : Laptop with windows vista(32 Bit Home Basic SP 2)
: iPAD
: Tata Docomo internet data card

PROBLEM : I connect to internet via data card on my laptop. I want to share this internet connection on my iPAD which I am not able to do.


After connection to internet via data card on laptop, I created a wireless ad hoc connection. Which creating ad hoc connection I do not get the option of " SHARE INTERNET".
On iPAD this network is detected and the iPAD connects to this network.
On Laptop it is then shown this way :-

MY LAPTOP -------------------- MULTIPLE NETWORKS ----------------- INTERNET

But still the internet on iPAD doesnt get activated.


Plz help. ...
 

A:Access data card internet on laptop through wifi

GOT THE SOLUTION.!!!
After extensive search on the internet, I got 1 solution. Unchecking the option "ALLOW SHARE OF CONNECTION" in properties of the data card internet. Then setting up of an ad hoc connection, will get the option "SHARE INTERNET CONNECTION".

Thank You
 

http://www.techspot.com/community/topics/access-data-card-internet-on-laptop-through-wifi.193231/
Relevancy 27.52%

I m going to include as much information as possible because I really don t know what s wrong here So a few days ago I updated a program which resulted in it crashing on startup I searched for a solution and some people said to try reverting my video drivers and or using quot AMD Cleanup Utility quot to uninstall my current drivers and then reinstall a different version I used the program to uninstall the Beta drivers and other AMD utilities and restarted the computer once it was finished to complete the process However once I tried turning the computer back on the monitor said that there was no signal This was fixed by taking out the video card and plugging the monitor into the Monitor to Video from No Signal Card VGA slot on my motherboard to use the integrated video as for some reason it wouldn t work if my video card was still inserted in the motherboard I tried restoring Windows to an earlier date but this made it so that neither the video card nor the integrated video could successfully send a signal to my monitor After a few more restores I tried plugging in a different HDD with a working copy of Windows on it as well and No Signal to Monitor from Video Card this let me successfully boot up with the integrated video Switching back to my original HDD I could now also successfully boot with the integrated video even with the video card inserted I m not sure why this helped but it did I had been using a VGA to DVI converter to be able to plug the monitor into my No Signal to Monitor from Video Card video card since the monitor came with a VGA cable so I assumed that maybe using an HDMI cable would fix the problem It made no difference The doesn t show up in the Device Manager either It s not connected to the monitor but it is plugged into the motherboard so I don t know if this should be the case I also tried dusting out my computer and pulling out the CMOS battery for minutes but neither helped Related Specs XFX Radeon GB ASUS VS Windows Home Premium BIOSTAR TZ A nbsp

A:No Signal to Monitor from Video Card

Plug the GPU into the PCIe slot, boot up your machine using the VGA graphics, then install the latest 13.4 stable driver. If that doesnt help, try another PCIe slot.
 

http://www.techspot.com/community/topics/no-signal-to-monitor-from-video-card.193096/
Relevancy 19.35%

I have a WD External SATA 1TB Hard Drive that has ~700 GB of family memories/movies/documents/etc and it is now connected to Windows 8.

The original housing it came in was unsurprisingly cheap and the connection piece broke. I re soldered it on and the connection was made but the drive threw nothing but errors. I figured I messed it up so bought an external case and assembled it. Now however, the drive does not show up under my computer but does in Disk Management.

Disk Management claims that the HD has the full TB unallocated and not initialized. I don't want to initialize it because I don't want to lose the information I have on it. Any idea on how to get this working?

I have downloaded and used the Data Lifeguard available at WD and the External has passed the Quick Test so drivers are all there and working.

Thanks
 

A:WD External Drive "not initialized" but has data on it?

Umm, I would try first connecting it back to whatever PC version you were using before (Assuming Windows 7) and seeing whats up.

If that does not work, try messing with the connection that you re-soldered and making sure its all done fully correctly, something may have gotten crossed.
 

http://www.techspot.com/community/topics/wd-external-drive-not-initialized-but-has-data-on-it.193090/
Relevancy 27.95%

Hi guys, I have a Cisco dual band wireless router that I previously bought to cater for my house network to support older device that runs on wireless G and new devices that runs wireless N.
One set to N only on 5Ghz
Another set to Mix mode on 2.4Ghz

Now that all my older devices has all being replaced with devices that supports wireless N.
If I disable one band, and enable only one, the N-only mode on 5Ghz. Will it help boost the signal or network in any way? If not, is there anything that I can do to fully utilize the dual band capability of the router since that now I do not need to run dual band.

Thanks. (Sorry if my questions sounds stupid, I'm not so good in this tech stuff)
 

A:Boosting wifi signal

No, your question is valid 100%, it isnt stupid. The only downside about 5GHz, is its range. The 2.4GHz band has been around longer and the 5GHz one is still an emerging technology. I had a dual band router in the past before I switched to an ISP that forces their own router on your, and I noticed no noticeable difference in performance. The 2.4GHz is fine for any average user. I would distribute the more heavily used to devices to the 2.4GHz band since it is more consistant. the 5GHz band can be used for any device that is connection heavy (Skype calling, etc.). Keep in mind though, a lot of computers and devices still dont support the 5GHz band, you will notice this when you search for routers/connections on your devices.
 

http://www.techspot.com/community/topics/boosting-wifi-signal.192756/
Relevancy 26.23%

I am working with Trouble Ethernet with Controller a Dell laptop N Win this problem just started recently and is driving me nuts It will hook up to my WiFi just fine but not the internet other computers on the same network can access the internet I did try downloading an updated driver from Dell off another computer via thumb drive with no luck It worked fine a week before never any trouble Did all the normal steps Clean and Defrag ran a Virus Scan tried to restore to an earlier date but would Trouble with Ethernet Controller not restore If I go into Device Manager it shows Network Connections just fine Below that is Other Devices with Ethernet Controller under that with a yellow eclamation point If I click on it it says device is not installed I tried doing a ping test in command prompt no luck tried resetting the TCP IP but tells me I need to switch to administrator there is only one user I went into Internet Options and it is set for Broadband connections but will not allow me to make any changes Any help would be appreciated nbsp

A:Trouble with Ethernet Controller

By sound of it your ethernet controller driver is missing go to dell website I think www.dell.co.uk/support and download latest ethernet controller driver straight from there
 

http://www.techspot.com/community/topics/trouble-with-ethernet-controller.192760/
Relevancy 24.08%

Hiya,

trying to resolve an issue with my homebuilt computer crashing while playing games. I had an HIS Radeon 5770 installed. I removed it and put in a Radeon 6670. When I powered the computer up, I got "no signal" on my display. I removed the new card and put in the old card again. "no signal"

I tried both in another PCIe slot. "no signal"

For the record, I have a Rampage III Formula mobo. There's no onboard video, so I can't try the computer without a video card.

Help?
 

A:Installed new Graphics card, now neither new nor old card sends signal to display

Have you tried clearing the mobo's CMOS (including battery removal) ?
Did you test the HD 5770 in another machine to see if it was indeed failing ?
 

http://www.techspot.com/community/topics/installed-new-graphics-card-now-neither-new-nor-old-card-sends-signal-to-display.192721/
Relevancy 27.95%

My monitor gets no signal sometimes for example I will leave the pc off for like hrs then turns on the monitor says no signal but each time I reseat the gpu it goes back to normal and does not experience lost signal not unless if turning it off for like hrs this is a new pc build came from dubai and shipped to philippines for like months and this problem was like weeks already pc specs No signal monitor mobo asus p b -v gpu xfx r double dissipation ram patriot x No monitor signal gb psu delco w No monitor signal not known ps tried monitor and other cables but none work and thing I noticed is that when I set the bios primary video to pcie then if it will not turn on then reseated gpu bios goes back to auto also note that I have post beeps and I can hear windows tune hope you guys can help me been searching for the solution but none seem to work nbsp

A:No monitor signal

Make sure the cables are securely fastened and pushed in. What CPU do you have? Because the CPU may not have integrated graphics, so only the GPU can transfer a signal. Just keep the GPU in all the time, it allows for better performance even when surfing the web (hardware acceleration.)
 

http://www.techspot.com/community/topics/no-monitor-signal.191113/
Relevancy 22.79%

Up until days ago my laptop was working fine Then all of a sudden while transferring files to external hard drive it just froze and that was pretty much the end of it It got to the point where this would keep happening and I know help recovery Need data with it s not good but I ended up just forcing the computer to shut down by pressing the power Need help with data recovery button then the computer wouldn t even boot up I ended up just buying a new laptop btw the external hard drive from my old laptop works fine I bought a hard drive enclosure for the old hard drive from my old laptop to recover some data the hard drive shows up as LOCAL DISK on the new computer but it freezes up when I try to access it everything else on the new computer working fine and can t even eject it Whenever I try to do something with the old hard drive it just takes a long time or there s no response or it freezes It even prevents my new computer from booting up or shutting down Is it hopeless to retrieve some data from this drive or is it a lost cause Really appreciate any help Thanks nbsp

A:Need help with data recovery

The drive may have some sort of malware on it. Download Malwarebytes Anti-Malware, and run a custom scan on the drive. If it comes up clear, it may have errors. We will proceed from there after you have completed the scan. Best of luck.
 

http://www.techspot.com/community/topics/need-help-with-data-recovery.191310/
Relevancy 22.36%

Hello Today my WD Raptor decided to die all of a sudden while using my computer it just froze up blue screen on me and reboot then keeps looping I do regular backups so I have quot most quot of my data on my external drives but this happened so suddenly that I have some recent excel files and pictures that are not on my last backup and I would really like to recover those files I run DFT and result was some sector logical failure I remove the drive installed on another computer and I can see the drive but every time I double click on it I got the message quot You need to format the disk in drive D before you can use died, data Raptor need recovery WD it quot and sometimes when I click on the drive I got quot D is not accessible Data error cyclic redundancy check quot Disk management sees the drive as quot Active Primary Partition quot but still can t open it from there I haven t format it yet but I wonder if there is a way to access it somehow to retrieve the data or the only way is WD Raptor died, need data recovery to format it to access it and then use some software to recover the files Suggestions opinions what do you guys think what options do I have Thanks in advance for all the input nbsp

http://www.techspot.com/community/topics/wd-raptor-died-need-data-recovery.191410/
Relevancy 22.36%

Hi I have a TOSHIBA GB I had much important project data on it and I did the most terrible mistake of my life not to back it up when all my other HDD datas are double if not triple backedup stick data recovery Memory It was working fine till late night till in the morning when I plugged it on my computer it told me it Memory stick data recovery sholud be formatted first The drive letter doesn t show up on My computer nor in My devices I tried using the EaseUS Data Recovery sample version but it too cant detect the drive I went through the flash drive data recovery procedure in this forum but I do not understand that if I format the drive the data will be gone Again I do not have a backup to copy it again I dont want to recover using the drive but just the data Please please please help someone if such a thing is possible Its almost months of my hard work An update Now its appearing as Removable disk on my computer and if I click on it its saying insert disk into drive F If I try exploring it the format option is appearing Please please help I need the data nbsp

Relevancy 27.52%

Ive seen this a lot on the net but none of the solutions have helped so far.
I just took the plunge to build my first pc. I have put it all together, following the manual and when I turn it on, the 3 fans (cpu, gpu, case) turn on, I hear a couple clicks but I get no signal on my monitor.

I have a Gigabyte 780T-USB3
AMD FX6300
Radeon HD 6670
8gb kingston DDR3 ram.

The mobo is dual channel, so could it be an issue that im only using 1x8gb. Should I get another 8gb?

I really hope if havent damaged anything in the building process. Ive been so excited about this and now im super gutted.

Any help or advice would be brilliant.

Thanks
 

A:Monitor says no signal on my new custom built PC

Full model number for the mobo is GA-780T-USB3? Doesn't look like it supports the FX-6300.

http://www.gigabyte.com/support-dow...4DE70BB3E832BEDD48D&s=Socket AM3+&cs=AMD 760G
 

http://www.techspot.com/community/topics/monitor-says-no-signal-on-my-new-custom-built-pc.191123/
Relevancy 27.52%

Hi folks, I'm having problems with my wireless connection on my desktop computer and I'm really stuck! The signal regularly drops to 1 bar and the speed will fluctuate anywhere between <1Mbps up to 11Mbps (although it's usually at the lower end), and sometimes it will lose connection with the router all together.
I've used a Belkin USB dongle and more recently a TP-Link PCI Express card, both N150. My router is a D-Link N150. Both the dongle and the adapter have had the same issues. In comparison, my Lenovo Z570 laptop and before it got destroyed my housemate's HP laptop had no issues, which basically leaves me with just my PC as a possible cause or some sort of setting somewhere.

PC spec:
Motherboard: Asus P7H55-M LE
Processor: i3
OS: Windows 8

If anyone has any ideas I would be really grateful!
 

A:Wireless speed/signal problems

Does your router have a password? Someone could be stealing bandwidth.
 

http://www.techspot.com/community/topics/wireless-speed-signal-problems.190958/
Relevancy 22.36%

Greetings guys, hope you are doing fine.

I'm using ExpatShield to play SCII ( long story ). Anyway, I tried today to download an arcade map from within SC ( 3 MB ) but it was extremly slow. I alt-tab and opened Resource Monitor and here is what I found >> http://imageshack.us/photo/my-images/33/expatbug.jpg/
As you can see ExpatShield is downloading at near 70 KB/sec but is not passing data to the original application ( SC in this case ). It actually downloaded more than 70 MB and the map was still at 2%. Moreover, when I exited SCII, Expat kept downloading.
It usually works fine except for this case.

Thanks in advance.
 

http://www.techspot.com/community/topics/expatshield-not-passing-data-to-application.190865/
Relevancy 23.22%

Hi;
I've got a home network with two wireless access points (routers with WiFi). One router is the main unit for Verizon FIOS. this is the DHCP server. The other router is upstairs, and performs only to allow an iPod or Kindle to be connected upstairs (have trouble getting a good signal from the main router downstairs). This router has no WAN connection, so is really just a switch with WiFi.

So, I'm starting to get security conscious, and wondering exactly what data on the network is getting out on the WiFi.
Does everything going through the router with the WiFi go out on the radio, or is only data being sent to/from connected WiFi devices available over the air?

Thanks for your help

FW
 

A:What data goes out on Wi-Fi?

Without any devices connected, the only thing "going out" is a base signal (ie the rf channel) and the SSID.

When a connection is made, the data traversing the WiFi is dependent upon what specific services are being used by the connected device; eg for a device with a browser, that would include the HTTP request and the subsequent reply.

For security, we activate one of the encryption protocols so that someone nearby with RF tools may see the signals but not be able to 'read' them - - just like SSL protects a browser session.
 

http://www.techspot.com/community/topics/what-data-goes-out-on-wi-fi.190636/
Relevancy 22.79%

First post and here is the story I have an old broken XP laptop A friend loaned me his IDE SATA to USB cable so I could get some files off the hard drive I proceeded from computer another one Unable data to get to to connect and download what I wanted o my Acer windows computer I put everything into a folder I can open that folder and read the Docs and Unable to get data from one computer to another look at the pictures no problem I copied the info to an external HDD I tried to download it to my wife s laptop but it is not there I tried to load the same info on to a Cruzer Flash drive and transfer it the same way The folder is empty is what I get when I click on the flash drive letter If I put it back into my computer I can read it If I click properties of the drive it shows the space being used I also tried to put the info onto a laptop at work same thing If I add an unrelated file onto the flash drive it works normally These files are possessed Help I guess you can t edit the title nbsp

A:Unable to get data from one computer to another

It could be because you could have "hide hidden files/folders" checked. Just a guess, good luck.
 

http://www.techspot.com/community/topics/unable-to-get-data-from-one-computer-to-another.190609/
Relevancy 21.93%

I have two Western Digital Tb HD making data Problem copy connection to adhoc HD s which I use for archiving and are carbon copies of Problem making adhoc HD connection to copy data each other and my third installed OS HD They are both external to my computer in fact one came as part of a WD My Book Previously I had my Asus P Q Deluxe fitted and I could just plug the two HD s into the PSU with a spare power cable and connect them to the mobo with a couple of Sata cables and copy any data from the main installed HD or replicate data between them No problem However due to RAM issues I have swapped the mobo out for my Asus P W DH Deluxe I just assumed I could go ahead with my adhoc method of plug and play HD connectivity but after shutting down my desktop wiring in just one archive HD and powering up the computer went a Problem making adhoc HD connection to copy data bit funny All the icons had shifted over to my TV display next to my desktop while my monitor s desktop pic got squashed vertically with vertical letterbox lines left and right pretty much as though I had been messing with the AMD Problem making adhoc HD connection to copy data Catalyst Control Centre Any ideas why plugging in an HD or two into the spare Sata EZ Raid sockets would cause this Why didn t it behave like P Q e g plug amp play style or as if I had simply plugged in the HD via the USB One thing I forgot to check was if the HD showed up in My Computer while the icons and what not were on the TV screen Tom nbsp

A:Problem making adhoc HD connection to copy data

Nevermind. I plugged the two archive HD's into the mobo today and all is fine and copying perfectly.

Tom.
 

http://www.techspot.com/community/topics/problem-making-adhoc-hd-connection-to-copy-data.190199/
Relevancy 27.52%

So I just spent over $600 to get a decent gaming computer, no monitor included of course because I already have one. It just got here today and I hooked it up and it looks like it's running fine, beeped once on start up and the LED lights lit up and the fan was spinning. However, when I hooked up the monitor it says "No signal" for the DVI and VGA. I've tried two different monitors to see if that was the case but still said "No signal". This is frustrating and since the computer is new and expensive I'm scared to open it up and start messing with things because I have no idea what is what. (I'm only 15 btw, my parents don't know about computers at all so I'm by myself with this) Please help!
 

A:New computer, monitor recieves no signal

Profile says female, 22 yrs old?

Does the motherboard have a VGA plug? Try connecting to this until you get the graphics drivers installed.

Also, post your system specs so we can see if there are no other problems..
 

http://www.techspot.com/community/topics/new-computer-monitor-recieves-no-signal.189444/
Relevancy 25.8%

I just updated my Asus Eee PC 1015PN from Windows starter to Windows ultimate. Everything seems fine except for my Network controller. It says there are no connections available and it doesn't look like it recognizes my network controller.

In Computer Management, under device manager, in Other Devices - the only thing listed is Network Controller with a yellow exclamation mark. When I double click on it, it says the manufacturer is unknown and the drivers for this device are not installed (Code 28). I tried to update the driver through the system but it doesn't find anything.

In Everest, Network, PCI/PnP Network, it lists Atheros AR8132 PCI-E Fast Ethernet Controller and Broadcom 802.11n Wireless Network Adapter. That is the only mention of my wireless adapter I could find.

Any help would be much appreciated. I can provide more info if need be. Thanks
 

A:Netbook not recognizing network controller - code 28

it lists Atheros AR8132 PCI-E Fast Ethernet Controller and Broadcom 802.11n Wireless Network Adapter.Click to expand...

It sounds like you should have 2 network controllers - one wired, the other wireless.

Are you saying it's just the wired Ethernet connector? or both not working? Did you try the ASUS web site? If one of the connectors is working, i think the ASUS site offers the option to detect your model and tell you drivers needed. Or look up your model manually on their site
 

http://www.techspot.com/community/topics/netbook-not-recognizing-network-controller-code-28.164478/
Relevancy 25.37%

I play minecraft and I would like to record, is this a good enough graphics card to do this?
 

A:Is intel 82865g graphics controller good for gaming?

Woooooohhhh, that's some old tech lol.

Can't imagine you would be getting awfully good frame rates with something like that. However, it should be alright to record using fraps, just give it a go (fraps is free) and see if it works.
 

http://www.techspot.com/community/topics/is-intel-82865g-graphics-controller-good-for-gaming.189099/
Relevancy 21.93%

My computer running Windows Ultimate -bit can no longer access my Western Digital Caviar quot Black quot TB hard drive that s connected but I suspect my data to still be in there so I wonder what data recorvery tools people have used and recommend This is one of the additional drives to my operating system C drive It has been formatted as NTFS and been working fine for several months until with recommendations Data format, from drive please lost recovery software a week ago Now it appears as the E drive on Data recovery from drive with lost format, software recommendations please My Computer as originally configured but the volume label is now blank I used to have that named as quot Media quot When I double-click on it to Data recovery from drive with lost format, software recommendations please enter the drive I get the Data recovery from drive with lost format, software recommendations please error message quot E is not accessible The parameter is incorrect quot In Computer Management -- gt Storage -- gt Disk Management the drive appears but it s File System is now indicated as RAW rather than NTFS I have tried using Active Partition Recovery and that successfully lists my drive with the original label name quot Media quot and as NTFS and also lists the folders located at the root of the drive which is why I suspect my data to still be in there and recoverable However when I use this tool to do a full scan of my disk it freezes after scanning MB There are tools out there with varying reliability so whch ones do people here recommend another tool I trired I forget its name was scanning my disk but prediced days to go over the entire TB so that s out of the question I have been told to use a tool that can recover files onto a separate disk rather then try to repair the original disk and risk losing more of the original data Any advice would be greatly appreciated Thanks nbsp

A:Data recovery from drive with lost format, software recommendations please

Oh crap. Something like this happened recently to me when I had backed up some data to an USB thumb drive. It worked fine for awhile, then some weeks later, my PC just couldn't read it anymore (kept saying "disk in drive needs to be reformatted/etc"...and the properties for the drive also showed it as RAW format instead of FAT32 like it would have been usually).

I think the issue is drive corruption, which seems to be fairly common with external devices like USB drives, but odd in the case of an internal drive. The remedy for me was to try to access it from a different system, which was easy since being a USB stick I could try it elsewhere easily. If you can use another system to access the drive, preferably a Linux/Ubuntu based one; it is likely your best bet to recoup the data before its lost permanently. An external HDD kit would be ideal, and they are quite cheap also.


Hope this helps!
 

http://www.techspot.com/community/topics/data-recovery-from-drive-with-lost-format-software-recommendations-please.187901/
Relevancy 25.37%

So we have a server at one of the places I work that is a domain controller and DNS server website domain server controller pointing DNS to of instead address as well as an smtp server The domain is named companyname com The website is you guessed it companyname com Now why they set this up like this I don t know but because they have every now DNS server pointing to domain controller instead of website address and then the DNS server decides to point companyname com to the domain controller and ignore the fact that I have a www Host A record pointing to the web server s external IP address and a record saying DNS server pointing to domain controller instead of website address that DNS server pointing to domain controller instead of website address companyname com should also point to the web server s address The problem seems to stem from that when the server reboots for updates it of course forces the DNS server records to update and it puts an entry in there that contradicts my static records with the domain controller s local address in for companyname com Can I force it NOT to put a certain entry in there or rather not update a certain entry that it has in there Or can I force it to treat my static records as primary I m fairly new to this as I ve not dealt with this issue before and I m out of ideas nbsp

A:DNS server pointing to domain controller instead of website address

Hmm; for the External DNS accessible to the web

create a CNAME for www.company.name
create another for dns.company.name.
each pointing to unique IP addresses
this dns ONLY supports publicly available services; NOTHING internal

the Domain Controller should have a SEPARATE DNS, internal to the LAN, not accessible to the Web.
Internal users configured to -> internal DNS which performs recursive lookup to your ISP's DNS.
 

http://www.techspot.com/community/topics/dns-server-pointing-to-domain-controller-instead-of-website-address.187372/
Relevancy 26.23%

Hi I rebbot my PC recently and my audio is not working Im don't find audio SOS controller looking for the right driver for several days and nothing I tried several times and I don t know what to do more I have a TOSHIBA SATELLITE with Windows XP sp I pass Everest in my PC I copy the most important parameters down If I look the problems in my PC I can see that - Controladora de sonido multimedia AUDIO PCI VEN amp DEV C amp SUBSYS amp REV amp AAA amp amp FD Los controladores de este dispositivo no est n instalados - Controladora de v deo PCI VEN amp DEV amp SUBSYS amp REV amp AAA amp amp Los controladores de SOS don't find audio controller este dispositivo no est n instalados - Controladora de v deo compatible VGA PCI VEN amp DEV amp SUBSYS amp REV amp AAA amp amp Los SOS don't find audio controller controladores de este dispositivo no est n instalados - M dem PCI PCI VEN amp DEV C amp SUBSYS amp REV amp AAA amp amp FE Los controladores de este dispositivo no est n instalados No disponible ACPI TOS amp DABA FF amp Los controladores de este dispositivo no est n instalados Please can anyone help me thanks a lot Irene PS everest report Computer Operating System Microsoft Windows XP Professional OS Service Pack Service Pack DirectX DirectX c Computer Name IRENE-PORTATIL User Name Irene Motherboard CPU Type Mobile Intel Celeron M MHz x Motherboard Name TOSHIBA Portable PC Motherboard Chipset Intel Montara-GM i GME System Memory MB PC DDR SDRAM BIOS Type Toshiba Display Video Adapter Intel Extreme Graphics D Accelerator Intel Extreme Graphics Multimedia Audio Adapter Intel DBM ICH -M - AC Audio Controller B- Storage IDE Controller Intel R DBM UltraATA Storage Controller - CA Disk Drive SAMSUNG HM HC GB IDE Disk Drive Kingston DataTraveler USB Device MB USB Disk Drive Ut USB FlashStorage USB Device MB USB Optical Drive MATSHITA DVD-RAM UJ- S DVD RW x x DVD-RW x x DVD-RAM x DVD-ROM x CD x x x DVD RW DVD-RW DVD-RAM SMART Hard Disks Status OK nbsp

A:SOS don't find audio controller

I tried also to check with this tool of Intel and it doesn't found the drivers...
http://www.intel.com/p/en_US/support/detect

Audio Driver for Intel Desktop Board
Product Detected Controladora de sonido multimedia
Current Driver Installed
This device is unknown or unsupported. Please contact the manufacturer for possible updates. More information>>
 

http://www.techspot.com/community/topics/sos-dont-find-audio-controller.187189/
Relevancy 27.52%

I have a PC running Windows bit on an ASUS p e delux mobo My video card was a nice NVIDIA GeForce GT ASUS which died a week ago and had to be replaced I decided to go for an ASUS NVIDIA GeForce GTX Ti after some rather vague technical advice Please note that the mobo has a pci-e slot and the card runs on pci-e The No video during signal boot sequence advice I received was that the card will run but on pci-e speed which was OK No video signal during boot sequence I installed the card and booted the PC My monitor came up with a quot NO SIGNAL quot indication After a considerable amount of time the monitor turned on and Windows booted normally with one exception the dvd drive No video signal during boot sequence had suddenly become quot invisible quot Note that the driver for this drive is loaded during the boot sequence Other indications like num lock on which I had set to off showed that something was changed in the boot sequence From then on I boot and teh same happens Windows runs nicely on the new video card everything is great but no boot sequence and no dvd drive Unfortunately I cannot see the boot sequence to try and fix this I cannot use the dvd drive to load anything I cannot see my way out of this Please help I have no idea how to fix this nbsp

A:No video signal during boot sequence

The video card may not be recognized/accessed until the computer boots up fully. Do you know if you have an Onboard video port on the motherboard?? If so, try connecting to that and booting the computer to see if it shows anything on first boot and then goes away as soon as it goes to boot windows..

Could check the BIOS settings for anything to do with how video is treated, if it is set to try and use both Onboard or an extra video card, try switching it to only an extra card. However, if the card dies and you're forced to use onboard you will have to reset the BIOS before you can use it again.
 

http://www.techspot.com/community/topics/no-video-signal-during-boot-sequence.186759/
Relevancy 22.79%

Okay A data? Can I my recover few months ago I had a major shut down on my previous Laptop it turned to mush it slowly got worse Can I recover my data? and worse and the monitor went blue screened about times an hour and was just overused in fairness I got it second hand and it was already years old but they had it fixed up before giving it to me new pieces inside the computer extra ram and settings etc etc Anyway I ve given up on getting it fixed at this point in time I Can I recover my data? do have a couple things on there saved to the Desktop and other Folders such as Pictures n Such and other things I needed for work I managed to remake most of it and then silly me only had them on a USB I d been using about a month and it stopped working plug it into the computer and Nada the Charger Port is even gone and I can t get it turned on for a minute if I move the laptop even an inch the screen shows sections of rectangles all along it in funky colors until it just comes up black dark black as if the computer s off So here s my question finally is there a way for me to get my files from that computer and hook it up to my new one as like a storage device so I can get my stuff off of it and hopefully not any viruses lt lt quot Oh and as a side question Is there any way to get my files off my USB that just stopped working as I lost about of my work Again I don t need it urgently or anything it would just be nice to have it all back nbsp

A:Can I recover my data?

If a USB stick stops working, it's pretty much bye-bye. There are of course some things you can do, but I'm not going to bother explaining them as I don't believe it will help you.


As for your laptop hard drive: the question is, is it SATA? This is the power/data connectors on the harddrive.

It could be as simple as pulling out the HDD, and plugging it into another desktop computer. Or, into a USB HDD dock.
 

http://www.techspot.com/community/topics/can-i-recover-my-data.186663/
Relevancy 26.23%

Hi guys I have a problem that seems to be slowing down my already-crap of a PC A message keeps popping up with New Hardware Found Video Controller VGA compatible and telling me to install some drivers after I somehow unplugged and re-plugged my monitor cable Backround information So I did some homework went on the PCI database site and searched for the vendor and device numbers VEN and DEV Link to site http www pcidatabase com vendor details php id It gave me a link to it http downloads viaarena com WinXPE May xpesp km xp wishld logod v zip I downloaded it but I m too incompetent to take the next step required I extracted it with winrar and spent minutes searching for the setup or install button but the only application seems to be VTTimer I then downloaded DeviceDoctor and it told me should download a VIA Fast Ethernet Video (VGA controller compatible) Compatable Adapter I don t even know if the two are related and so I did Nothing happened SO I Video controller (VGA compatible) guess I m asking is the part about PCI database what I m suppose to be doing Am I doing it right If so how do I install the bastard Did I f ck up by using Device Doctor and Video controller (VGA compatible) downloading some random driver It was telling me to download a bunch of other things that didn t match the brand of my products How do I keep my drivers updated What do Really appreciate your time guys and thanks in advance If it helps I have an AOC monitor nbsp

A:Video controller (VGA compatible)

CIifford said:





<snip>
It gave me a link to it (http://downloads.viaarena.com/WinXPE/May05/xpesp2_km400_16944216_xp_wishld_logod_v20.zip), I downloaded it, but I'm too incompetent to take the next step required. I extracted it with winrar and spent 5 minutes searching for the setup or install button, but the only application seems to be VTTimer...
<snip>Click to expand...

No worries. The solution for that case is not at all obvious. See How to Install a Driver when there's no Installation .EXE file to run




SO. I guess I'm asking is the part about PCI database what I'm suppose to be doing? Am I doing it right? If so, how do I install the bastard?
Did I f*ck up by using Device Doctor and downloading some random driver? (It was telling me to download a bunch of other things that didn't match the brand of my products...)
How do I keep my drivers updated?Click to expand...

1. PCI database is a useful tool to help identify the device vendor and the device actually is. (e.g. a video chip vs. an Ethernet/network adapter). PCI database doesn't usually include the driver for a device tho in your case I see it did).

Example of how PCI database might help: you have a Dell computer so go to the Dell website and look up your computer model for drivers. And you find Dell lists 4 different drivers for 4 different video cards they have used in that machine!! PCI database would help identify which one is actually in your computer so you know which one to select

2. Those driver update tools can be helpful but also problematic. They will identify every driver matching a hardware ID but all drivers it finds isn't necessarily a fit for your OS or your hardware. Best advice is "If it ain't broke don't try to fix it" meaning only look for missing drivers. Trying to find the "correct" driver update can be a crap shoot

3. Number 2) above also means always create a system restore point before trying a driver you aren't sure of. At least it helps you back it out if the driver isn't right and causes problems

Hope that helps
 

http://www.techspot.com/community/topics/video-controller-vga-compatible.186192/
Relevancy 24.08%

Every now and then my monitor looses it's signal "no signal" is only thing on screen however when shut computer down and restart it the monitor is fine.

Would this be my video card going? or just the drivers?

I have Geforce 8800 GT (512 mb)

also I have a
geforce GT 220 is this one better than the 8800?
 

A:Monitor "no signal" and video cards?

DLambie said:





geforce GT 220 is this one better than the 8800?Click to expand...

No
The 220 is less than half the performance value of an 8800. Of the 200 series, you would need a 260 to better a 8800.

Personally, I'd go for GTX 550Ti or better as they are the newest GPU's and use less power for their performance level.
 

http://www.techspot.com/community/topics/monitor-no-signal-and-video-cards.183921/
Relevancy 27.95%

I just moved into an L shaped house with one side office and the other side apartment The Wi-Fi signal dropping office owner is the landlord so we get free wifi The problem is that periodically the wireless signal stalls out when loading a webpage or video Their setup is a Motorola Surfboard Maybe SB that goes to a Linksys port switch - of those ports are taken up by ethernet cables going to computers while one goes to the upstairs netgear wireless router The wireless signal is not all the time where we are in the house ranging from - So I went out Wi-Fi signal dropping and bought a Western Digital N router to replace their older netgear Wi-Fi signal dropping router I figured this would solve the problem but it didn t we are still getting the same range and the signal is still dropping I checked the software of the linksys switch through my browser and it says its running firmware I think this may be a choke point but I am thinking it might also have something to do with the router Either way my landlord is willing to cooperate with me since I replaced the router and didn t see any improvements Any ideas on what I should do Here are the traceroute results traceroute to hops max byte packets ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms nbsp

A:Wi-Fi signal dropping

How many walls/floors are between you & the wi fi?
I ask because I'm in a two story building & my wi fi has to go thru a floor & several walls, lotsa interference. I'm considering a cantennae http://en.wikipedia.org/wiki/Cantenna
"A cantenna is a directional waveguide antenna for long-range Wi-Fi used to increase the range of (or discover) a wireless network, made out of an open ended metal can. The cylinder portion of the can may consist of metal-coated paperboard."
Oddly enough, I have no problem using a laptop, just tower get low signals .
 

http://www.techspot.com/community/topics/wi-fi-signal-dropping.185915/
Relevancy 22.79%

I have a Crucial 128GB SSD as my OS/Program drive, and a 750GB WD Black drive which contains all my music/movies/photos etc. My issue is that it goes offline or into like a stand-by mode after a certain period of time. So lets say I go to open itunes, it will take 8-10 seconds for it to access the drive and load up the program with my music. It's definitely going into some stand-by type mode, because I can hear when it goes into it, and when it comes out of it when I open a program or file that happens to be on the HDD. So I wanted to know if there is a way to disable that so my access is instant. Any info appreciated, thank you.
 

A:Data drive question

Could it be the "Turn off hard disk after" setting in the Power Options?


 

http://www.techspot.com/community/topics/data-drive-question.185262/
Relevancy 22.36%

I have two Seagate 7200 hard drives than are no longer recognized by the desktop or by my laptop via a usb/EDI/SATA adapter. These were my backup drives and have all my photos, itunes, and doc files. Rather than speed $1,000 to have the files extracted by a recovery firm I wondered if its possible to remove the storage media from one drive and install it in a new drive box. Say buy a $60 internal drive open it up and remove the disks, take the disks out of the non-working drive and install it in the new internal drive. Is that even possible? Would the circuitry on the new drive even recognize the replacement disks? Would the drives need to be the same GB? Inquiring minds want to know!
 

A:Can I rebuild a hard drive to recover data

I've heard of people buying the exact same drive (needs to be exact so the PCB is the same) and then swapping those out. I've never heard of people removing the platters and putting in a new drive - I think that would be highly risky if not impossible. Try to find a working drive with the same PCB on ebay, then swap the boards.
 

http://www.techspot.com/community/topics/can-i-rebuild-a-hard-drive-to-recover-data.184927/
Relevancy 27.52%

Hello I am experiencing some problems setting up my system Here are the specs LITE-ON X DVD Writer Internal Model IHAS Western Digital Caviar Black WD FAEX TB MSI XA-GD Kingston HyperX GB x GB -Pin DDR SAPPHIRE Radeon HD GB OCZ ModXStream Pro W Modular High Performance Power Supply ASUS VS H-P Black quot HDMI LED Backlight Widescreen LCD Monitor AMD HDZ FBK DGM Phenom II X Processor When the system is setup and plugged in the tower and all the fans turns on the lights on the motherboard turn monitor computer to signal New no build, the on to the quot phase power but I don t get a signal on my monitor The monitor works and the cords work I swapped New computer build, no signal to the monitor out the graphics card with the one on my work computer and it works as well When the system turns on there is no New computer build, no signal to the monitor beeping noise and it does not post I have tried unplugging everything except stick of RAM the PSU and the video card and there is still no signal on the monitor and it does not post I have also tried unplugging everything and plugging it back in to no avail Is this a motherboard issue Thanks nbsp

A:New computer build, no signal to the monitor

It's probably the memory palcement. The MSI motherboard RAM slots are configured slightly different from other boards. Ensure that you've put your RAM sticks in the first RAM slot (second from the CPU) and the second similar colored slot.
 

http://www.techspot.com/community/topics/new-computer-build-no-signal-to-the-monitor.184635/
Relevancy 27.95%

My computer specs are as follows gb DDR corsair RAM Intel i ghz gb HD watt modular PSU nVidia GTX s running in SLI The issue I m having is my monitor is signal no SLI 260 in GTX monitor getting to not receiving a signal from the graphics card which leads me to think that the gpu is damaged However the power to the gpu itself is working fine I have also tried taking the cards out of SLI and just using them separately including swapping the cards places Nothing I then GTX 260 in SLI getting no signal to monitor tried removing components that may directly effect the gpu such as the ram and other peripherals I cleaned and inspected each and replaced them into their slots still no luck The only thing I have not done is remove the CPU or use compressed air to clean out the pci-e slot I will be trying the compressed air however I don t see it as a likely solution so I am posting for some help The reason I believe that it may be an issue other that my graphics is because I would think it likely that both my graphics cards would fail at the same time especially when the computer was running just fine minuets before the monitor lost signal and powered off I ve tried various other small things such as remove the battery from the mobo switch dvi cables all connections tight on my modular PSU I have had similar issues in the past however they seemed to fix themselves faster than I was able to troubleshoot the problem So it may still work on its own however unlikely Or I have a faulty component either my mobo or gpu I believe are the most likely If anyone has any insight into my problem please post I m not here asking for the solution rather to brainstorm ideas that may lead to one Thanks for the help nbsp

A:GTX 260 in SLI getting no signal to monitor

Have you tried switching out the monitor? Maybe its the monitor and not the computer it self. Can not hurt to try.
 

http://www.techspot.com/community/topics/gtx-260-in-sli-getting-no-signal-to-monitor.183511/
Relevancy 22.36%

I have Windows XP SP that would not boot to the desktop on a Normal boot The system has SATA HDD amp SATA DVD-RW partition HDD XP -- Windows lost data problem on Red SATA ports on the Motherboard amp Black SATA port on the mother board I apologize but sadly I do NOT remember if the DVD drive or one of the HDD was in the Black SATA port I m not REALLY sure I Windows XP HDD partition problem -- data lost understand the difference but The system would boot up almost to the desktop so I was able to boot up in Safe Mode Once I could get to the desktop I looked at the System log in Event Viewer amp it showed that the controller was reporting drive errors on Hard Drive NOT the boot drive It was happening so much that it was virtually filling the Event Viewer amp making it Windows XP HDD partition problem -- data lost hard to see anything else in there amp kept the system from being able to boot to the desktop It never made it to where it said Windows was loading my personal settings I have never seen a NON-boot drive keep an XP system from being able to boot up Once I made it to where I could see the Event Viewer messages I shut the system down amp disconnected the quot bad quot drive amp restarted the system It then booted up fine but when I looked at the event Viewer is STILL showed Hard Drive errors I thought that it might be a bad cable so I shut the system down again amp connected the SATA cable that was connect to Hard Drive amp moved exchanged it with the one on Hard Drive amp booted the system I looked in the Event Viewer amp it was STILL showing Hard Drive errors so I opened quot Disk Management quot amp it thought the hard drive that I took out was still in the system At this point it was actually in another room Disk Management showed hard drive errors so I right clicked on the drive that wasn t even IN the system amp chose quot Delete Partition quot amp that made the drive errors stop Remember THAT hard drive was NOT in the system at the time I rebooted the system amp looked in Drive Management amp it reported quot Drive Missing quot When I looked in Event Viewer it STILL had Hard Drive errors NOW I suspect that this is REALLY a power issue amp NOT a hard drive or controller problem My power supply has leads Has SATA type amp IDE type type power connector Has SATA type Connectors Has IDE type amp Floppy type power connector I shut the system down again put the quot bad quot drive in the system disconnected all of the SATA cables amp power cables Plugged the HDD in the Red SATA ports left the DVD uplugged moved the power cables Of course I figured that since there where SATA power connectors on one lead it would be OK to plug in hard drives Keep in mind that this system has been running this way for years with showing this problem although now that I think about it the boot drive has failed times BUT they were all Seagate GB drives amp I have had those fail in several other systems FAR more often than the Hitatchi or Samsung However the WD drives have failed just as often as the Seagate Since I now suspected that this was a power problem I decided to plug in only of the HDD in the SATA power lead amp plugged the remaining HDD in the SATA power lead that the DVD was using amp I left the DVD disconnected I booted the system NOW my question Problem The drive that I took out of the system thinking it was bad now has NO partition When I deleted the partition on the HDD even though it was NOT in the system at the time that partitions are gone I have not done anything else to the drive since I found this problem so does ANYONE have ANY idea what I might be able to do to bring the partitions amp my TB of data back In UNIX there are format commands commands that can bring back files because they re not REALLY gone the allocation table is just not looking in the right place or something I realize this was a L-O-N-G amp Boring story but I had to go through the whole thing to explain the problem amp hopefully get a solution Thank you ... Read more

http://www.techspot.com/community/topics/windows-xp-hdd-partition-problem-data-lost.183526/
Relevancy 22.79%

Does anyone have an opinion on a free, good, and easy to use web site for storage and back up of all my home PC files online?
 

A:Online data storage?

http://mozy.com/
or
http://www.carbonite.com/en/

Carbonite is better in my opinion, especially for small business backup. Hope this helps, take care!
 

http://www.techspot.com/community/topics/online-data-storage.179378/
Relevancy 27.52%

So earlier last week I picked up a new w power supply and a new graphics card My old setup had a w PSU and an integrated geforce piece of garbage The new stuff is Thermaltake TR W RUC W ATX V V Intel Core i Compliant Dual mm Fans Full Cable Sleevings Power Supply EVGA G-P - -KR GeForce GTX Ti Fermi FPB GB -bit GDDR PCI Express x HDCP Ready SLI Support Video Card Basically what happened is I was a little over zealous when I was putting in the supply and the card I tossed them both in at the same time without uninstalling the old card signal from new graphics Problem getting integrated graphics drivers or going in and changing settings in the control panel When I powered on the power supply worked fine I didn t have a long enough SATA cable to reach the disk drive so I just plugged in the hard drive and figuered if it worked I could run out and get an extension cable No noise from the MOBO no beeps nothing that sounded like I forgot to plug anything in however the new card failed to initialize the moniter quot No Signal Found quot kept popping up I realized that I haden t set the new card up to display and powered everything back down plugged the VGA cable back into the integrated card and the same display message popped up on the moniter quot No Signal Found quot I tried various versions of plugs including using an Problem getting signal from new graphics card AVI adapter for the VGA cord taking the new PSU out and putting the old one back in trying the old PSU with the new card running the card without the extra pin power adapter required by the card and running all of these configurations with Problem getting signal from new graphics card another moniter and my TV Nothing - Now what I think is going on because the computer was running fine before any changes is that for some reason the plug and play changed the display settings to the new PCIE setup that the new card is without being configured thus disabling the integrated card that came with the machine in effect the old setup doesn t work and neither does the new one a friend of mine reccomended trying to reset the CMOS Any suggestions nbsp

A:Problem getting signal from new graphics card

The +12V rail on that PSU is only 18 Amps, you need a bigger amperage on it to run that graphics card. That's just my 2-cents. ;D
 

http://www.techspot.com/community/topics/problem-getting-signal-from-new-graphics-card.179097/
Relevancy 26.23%

I posted about this previously and thought it was fixed I got a laptop from a client thought it was dead It boots fine shows hp screen memory scan bios but cannot find any boot devices No cd s or dvds no hard drives tried several different ones no bootable usb sticks Just messing around I threw in two hard drives from other laptops and it booted right up Put the old drive back in and it boots fine no issues but there is occasionally a error in out in controller and drive DV7-1245DX cuts HP the logs quot Event Disk The driver HP DV7-1245DX drive controller cuts in and out detected a controller error on DR quot This would seem miraculously except at random intervals sometimes a few days sometimes a week or two the problem occurs again It is not always easy to fix either as it seems the trick is to have two bootable drives with operating system in them pull the bios battery unplug everything and unplug the ram After this I reassemble and it usually works but other times I have to try a few times or switch out the drives I used This would seem to indicate to me a failing drive controller It is just odd that it starts working again for a time This puts me in a tough spot because I cannot sell it like this and it is HP DV7-1245DX drive controller cuts in and out not extremely useful to me as if I m traveling I don t want to have to carry a bunch of extra hard drives and screw drivers This time I think I will try setting up another drive as its permanent drive and see if that makes a difference Note that I have already HP DV7-1245DX drive controller cuts in and out reinstalled the OS first vista then windows ultimate checked error logs switched out memory modules Any tips or ideas are appreciated thanks nbsp

A:HP DV7-1245DX drive controller cuts in and out

Have you talked, on the telephone, with the relevant techs at HP?
 

http://www.techspot.com/community/topics/hp-dv7-1245dx-drive-controller-cuts-in-and-out.178569/
Relevancy 25.8%

I've been playing games for more than 12 years with KB+Mouse and have never used a controller before. Games are becoming more and more controller optimized and I have an Eyefinity setup that would give a better experience with a gamepad, so I decided to get one

I've narrowed my options to Razer Onza TE BF3 Edition (Wired):

http://store.razerzone.com/store/razerusa/en_US/pd/productID.235034100/categoryId.54297600

And Microsoft Xbox 360 Wireless Controller for Windows :

http://www.amazon.com/Microsoft-Xbo...d-20&ref=sr_1_3?ie=UTF8&qid=1322381006&sr=8-3

They both seem pretty good, but have heard very mixed views on razer products...

Which one is better ?
 

A:Razer Onza or Microsoft controller for Windows?

Do you already own a wireless 360 controller? You can use a 360 controller on your PC if you add one of these. I use it and it works fine.
http://www.amazon.com/Xbox-360-Wire...FCT2/ref=sr_1_1?ie=UTF8&qid=1331256805&sr=8-1
 

http://www.techspot.com/community/topics/razer-onza-or-microsoft-controller-for-windows.178459/
Relevancy 25.37%

I have a Toshiba satellite a d-s The specs for this can be found here reviews cnet com laptops toshiba-satellite-a d-s - - html Sorry for no link but I am apparently not allowed to do that yet I bought it new and it came with windows vista A couple (Toshiba speed High host issue Satellite) controller years later I upgraded to windows Upgrading to the new OS was fine but then later I needed to upgrage yet again to bit This unfortunately was not as easy and I need to wipe the drive clean and start fresh Now there are a couple issues with the host controllers the main being that I keep getting warnings saying that the devices I plug in can run faster if I were to use a high speed High speed host controller issue (Toshiba Satellite) port This confuses me because the USB ports are but they are acting like they are I have done everything I can think of to get these to function correctly but nothing I do seems to work The second issue which isn t as annoying is that when I move the screen the sound for High speed host controller issue (Toshiba Satellite) connect disconnect a USB device is played and the little popup for quot new device connected quot is shown I am unsure why the screen is acting like it s a USB device I have disabled the notifications and sounds for all ports now but I would kind of like to know why this is happening Do anyone know how I can solve these problems I have checked multiple forums and have been searching for an answer for about months now with no luck I think I have provided enough information but if anyone needs more just let me know and I will be happy to provide it Thanks nbsp

A:High speed host controller issue (Toshiba Satellite)

Are there any yellow exclamation points in the device manager?
 

http://www.techspot.com/community/topics/high-speed-host-controller-issue-toshiba-satellite.178296/
Relevancy 27.52%

ok before i tried installing it i went to device manager disabled and uninstalled my onboard vedio card. then i installed the new graphic card but i get no signal VGA trough DVI... then i went back to my onboard graphics card with the new Graphics card still in VGA TO VGA and still get no signal.. But when i removed the New Graphics card. and plug in VGA to VGA to my onboards graphics i get a signal?
 

A:Installed graphic card no signal?

Do you have more than one port on the graphics card?
If so have you checked all ports for a signal?
 

http://www.techspot.com/community/topics/installed-graphic-card-no-signal.177691/
Relevancy 26.23%

Hey all,

I recently purchased an M-audio Axiom 49 MIDI keyboard and the M-audio fast track pro external sound card. While attempting to install the external soundcard, I was met with an error message reading: "USB Controller Bandwidth exceeded". I googled some solutions and was unsuccessful in finding an answer. I tried plugging each USB into a different USB port with no avail. Is there a way I can fix this without having to add additional USB card to my computer? Would an external USB Hub fix this problem?

Thanks in advance!

EDIT: Here's a screenshot of what i'm dealing with.
 

A:USB controller bandwidth exceeded

what are the specs of your computer? Are you using USB 1.0 ports?
 

http://www.techspot.com/community/topics/usb-controller-bandwidth-exceeded.177559/
Relevancy 26.66%

Is there anyway of using my wireless xbox 360 controller with my ASUS TF101 tablet?
 

A:Tablet controller

How do you want to use it as a remote control?
 

http://www.techspot.com/community/topics/tablet-controller.177491/
Relevancy 26.23%

My server is a domain controller thus i cannot add users with admin rights and so i cannot use lusrmgr.msc to add or change... i've added the user i want =active directory>users> and added the user and set it to admin..but when loged onto does not have the admin rights... learned that this was becuiase it was a domain controller
 

A:Add users to domain controller server

Correct, the DC admin has the keys to the kingdom and can create a user-id with/without admin privs.

Unless the admin is your very best friend, I would expect exactly what you are reporting.
 

http://www.techspot.com/community/topics/add-users-to-domain-controller-server.177336/
Relevancy 27.09%

im thinking of getting a lcd fan controller with temp sensors, tbh i mainly want it cos they look cool and would be nice to see the temp time etc on the comp but dont really care for the fan controlling part since mainly because the comp does it automatically anyway so really, is there a point in getting one?
also the case has a door so after a flat one
 

A:Fan controller

I think that'll be a question best answered by yourself. They do look cool (at least to most people) so that would be the point of getting one. People slap lights and decals and what not on their computers all the time. Not so they're faster or cool better but because they look good. So...sound like a reason to get one. Also, there are good reasons to know what temp the inside of your case is. So go for it, I've got a blue one to match the blue in my case and it looks ggooooddd
 

http://www.techspot.com/community/topics/fan-controller.176561/
Relevancy 21.93%

Having dredged the internet, I came across this forum amongst the many with questions relating to cd drives working but dvd not etc, but my issue is slightly different, i think.

CDs seem to play ok, and so do DVDs, but I seem to have a problem with my laptop reading a disc with DS games on it that it used to read no problem. The discs can be used in my other half's laptop, so it is clearly a problem with my laptop.

I'd appreciate if anyone could advise where I can start to solve this problem
 

A:Music and video play on laptop CD/DVD drive but not data files

You need to have the CD/DVD drive replaced. Internal lasers fail in strange ways. The drives are not too expensive and they are easy to replace
 

http://www.techspot.com/community/topics/music-and-video-play-on-laptop-cd-dvd-drive-but-not-data-files.175583/
Relevancy 27.09%

Hi guys, bought a new PC recently and got everything set up fine, except the GPU.

Its all installed correctly but when I go to install the drivers from either Windows Update or the given CD and restart to save changes, I lose video signal.

I see the boot screen and Windows 7 loading bar, afterwards my screen says "Mode not supported".

I'm using the Nvidia 560 Ti and my screen is a Samsung LE19R86BD.

Is the installation possibly switching to 1080 while my monitor isn't supporting it?
 

A:No video signal after installing GPU software/drivers

I've read that there are times when the driver can't properly read the EDID data from the TV, and causes display problem. Can you boot into safe mode, change the display setting to 1440x900, then reboot into normal mode? Looks like your nVidia card has both HDMI & DVI connection, maybe try changing connection from one type to the other?

The driver I found on nVidia's site is version 285.62. Is that what you have?
 

http://www.techspot.com/community/topics/no-video-signal-after-installing-gpu-software-drivers.173192/
Relevancy 27.95%

This is my first time posting on any forum so please excuse me if I miss some things out I recently got a second hand EVGA GTX gb OC from an online auction site I have a Dell XPS which 460 signal! GTX EVGA no Secondhand -- had a w psu in it I installed the card and attached both pin power cables and I got a single beep no signal and my computer wouldn t boot into the operating system I figured this might Secondhand EVGA GTX 460 -- no signal! be due to my power supply being under the recommended wattage so I bought a Zippy w psu and I m still having the same Secondhand EVGA GTX 460 -- no signal! problem My old card still works fine so no problem with the motherboard I ve tried uninstalling the old gpu drivers and still nothing The error code that my computers lights display translates to quot Other failure quot which Secondhand EVGA GTX 460 -- no signal! according to dell means there is most likely a hardware failure Is this a common problem and is there a solution or am I now the proud owner of a paperweight Thanks in advance Nesh nbsp

A:Secondhand EVGA GTX 460 -- no signal!

Maybe Dell don't allow you to change the graphics card? Maybe you can try the card in a friend's PC.

Btw $230 is very expensive for that card, about twice the market value.
 

http://www.techspot.com/community/topics/secondhand-evga-gtx-460-no-signal.176297/
Relevancy 22.79%

Hello Everyone,
A few month's ago my old laptop gave up the ghost and so I asked the local computer geek to take out the hard drive and memory sticks. I thought that was how to save all my "stuff", and he tech did not say otherwise, so I hope I did the right thing?
Anyway, while I wait until I can afford to get a new laptop.......here is my question:...Can I go to a computer store and have all that data put on a CD? Then when I get my laptop I can just transfer the data?
Thank you.t
 

A:How do I save data from old laptop?

Yes. But it will be cheaper to do it yourself with one of these.
http://www.amazon.com/Vantec-CB-ISATAU2-Supports-2-5-Inch-5-25-Inch/dp/B000J01I1G/ref=pd_cp_e_1
http://www.amazon.com/IDE-SATA-USB-Cable-Adapter/dp/B000YJBL78
 

http://www.techspot.com/community/topics/how-do-i-save-data-from-old-laptop.175873/
Relevancy 27.09%

EDIT Heh minutes after posting this i decided to reset my bios and what do ya know it decides to recognize my graphics card I should ve done that first Merry Christmas feel free to close thread Hey everyone first off Merry Christmas to you all Here s No inserting signal when monitor better card graphics my issue I have an NVIDIA gt graphics No monitor signal when inserting better graphics card card I ve never had any problem with it before I ve been trying to play the new Star Wars MMORPG on an Nvidia and that s just not working out The computer i had the graphics card in got a nasty virus a couple months back and i never got around to reformatting it so i exchanged the with the This is on a different computer than the one i usually have the in Got no signal to monitor Then i remember that the motherboard of my current computer can t support a gig graphics card thought that might be the issue Today i reformat my upgraded computer got it up and running again Still no signal to monitor Could i have fried the graphics card by inserting it in a computer with an incompatible motherboard Or is there another issue When i No monitor signal when inserting better graphics card used both computers together i had them on a kb switch to the same monitor if that makes a difference I appreciate any help and i apologize if my thoughts are scattered nbsp

http://www.techspot.com/community/topics/no-monitor-signal-when-inserting-better-graphics-card.175193/
Relevancy 27.09%

Hey Guys!

I just finished putting together my computer today, it seemed to go smoothly, took me longer than expected, but when I turned it on and plugged in my monitor, there was no signal detected by my monitor...

What steps should I take to figure out what is wrong or what should I double check before worrying that the MB is busted?
 

A:After building and checking for fan operation, no signal to monitor

I double-checked a lot of things... is it possible that the motherboard I'm using doesn't support monitors through the VGA cable? I don't have a DVI cable atm...

Also could the SATA cables from the SSD HDD or DVD drives interfere with this if they are in the wrong SATA port?

I am not sure what else I should try at this point... and its frustrating to say the least
 

http://www.techspot.com/community/topics/after-building-and-checking-for-fan-operation-no-signal-to-monitor.174975/
Relevancy 25.37%

Hey guys My internet provider has just recently been switched to Time Warner Cable They came by and hooked everything up to my desktop and my internet worked for that day The next day I had to call technical support and road runner services because my computer says I m connected but I m not sending nor receiving area Missing network connection and local controller any packets Road Runner took me through Device Manager where I noticed a big yellow question mark near Other Devices Network Controller Also after going through my Network Connections there s no Local Area Connection listed The techs responded that they couldn t help me unless I fixed my computer software I have already tried going through Computer Management and checking Plug And Play Services amp RPC Missing network controller and local area connection Services Any other suggestions are much appreciated I m currently working off of my laptop because I can t get online with my desktop Any requested information would just Missing network controller and local area connection be done by my usb flash Missing network controller and local area connection drive Thank you so much for your time nbsp

A:Missing network controller and local area connection

Open device manager. Uninstall those device with ? on them. Reinstall drivers for your network adapter.

What devices are listed under network adapter?
 

http://www.techspot.com/community/topics/missing-network-controller-and-local-area-connection.174762/
Relevancy 27.95%

Hi,

I have a Gigabyte GA-MA785G-US2H mobo with radeon HD 4200 graphics. It has HDMI 1.3 and I have an old TV lying around which happens to have HDMI input. I just built a new PC so, I decided to hook up these 2 and make a Boxee box.

I have Ubuntu installed on the to-be boxee and on the new machine I have Windows 7 Home Premium.

When I plug in the HMDI cable, nothing happens, that is, no display on the TV. I even doubled checked everything-input, cable!

Am I doing something wrong here? The TV is a Hitachi L32S02A.

The cable is HDMI 1.3 one.

I even tried the new PC which has my Radeon HD 6770 on it-still nothing!

What should I try now?
 

A:No signal through HDMI

Change your resolution to 1366x768 or lower and make sure the refresh rate is 60 before connecting to the tv..? Set tv to hdmi1 or hdmi2 input.
 

http://www.techspot.com/community/topics/no-signal-through-hdmi.174347/
Relevancy 27.95%

I've recently bought an ATI Radeon HD5450 however when everything is plugged in can't get a signal on DVI only on Analog. I am sure there is no problem with the cable, not only have I tried another DVI cable but my old video card does get a signal (DVI) with everything plugged in the exact same way.

If computer specs are needed:

MS Windows XP Home 32-bit SP3
Processor
Intel Core 2 Duo E7300 @ 2.66GHz 38 C
Wolfdale 45nm Technologie
RAM
2,00 GB Single-Kanaal DDR2 @ 400MHz (6-6-6-18)
Moederbord
Foxconn G31MV/G31MV-K (Socket 775) 40 C
Graphics
PLE2607WS ([email protected])
1024MBGeForce 9500 GT (Point of View) 91 C
Harde schijven
244GB Hitachi Hitachi HDP725025GLA380 (SATA) 32 C
Optische schijven
TSSTcorp CDDVDW SH-S223F
JGDW XIBS1Q38DI SCSI CdRom Device
 

A:ATI Radeon HD 5450, no signal (DVI)

I had a similar problem, card wasn't brand new when the problem occured but happened after owning it for a few years. Found out the card was dead. Not sure if an rma would fix your issue.
 

http://www.techspot.com/community/topics/ati-radeon-hd-5450-no-signal-dvi.174316/
Relevancy 22.36%

Hi all,

I've got a friend whose wife is ready to kill. The CD of wedding photo's is currently in three pieces and not backed up. Any leads where he can get at least some of the data recovered? At this point in time he's almost "money no object"...

...any leads would be appreciated,
Many thanks,

 

A:Broken CD - data recovery - any chance?

I've never looked into this before. I'd imagine there isn't much that can be done. CDs and DVDs have a short life in data storage terms and really should not be relied on as a permanent storage media for important data. There seem to be a few companies out there that offer data recovery from damaged CDs, but this is usually from scratched rather than broken into pieces disks.
 

http://www.techspot.com/community/topics/broken-cd-data-recovery-any-chance.172952/
Relevancy 25.8%

Currently my windows 7 doesnt seem to be able to detect my USB Controller.. it did before, but I still couldn't run the Chill ControlV.exe that's supposed to control my cooler so I uninstalled the program and started over. Now it could not detect the USB controller from any internal USB port in my mobo

EDIT:
My mobo is Asus P6T Deluxe V2 if it helps
 

A:Problem in Antec Kuhler 920 USB controller and Windows 7 (64-bit)

Do you see any yellow exclamation points in the device manager?
 

http://www.techspot.com/community/topics/problem-in-antec-kuhler-920-usb-controller-and-windows-7-64-bit.173374/
Relevancy 25.8%

Hi - I have a yellow warning indicator in my Devices and Printers folder next to my PC. The error message is:

Name - Texas Instruments 1394 OHCI Compliant Host Controller
Device Type - IEEE 1394 Bu host controllers
Device Status - This device cannot start (Code 10)

I am not exactly sure what this is affecting but I am unable to print for one, despite uninstalling and reinstalling the print drivers.

Anyone seen this type of issue before?
 

A:TI compliance host controller error message

What is the make and model of your printer. What type connection does it have? USB, Firewire or wireless?
 

http://www.techspot.com/community/topics/ti-compliance-host-controller-error-message.172675/
Relevancy 27.09%

Alright so Ive gotten all my PC parts today from Newegg It took me about a hour to assemble everything I m pretty sleeping/no signal Monitor - new build stays sure i have everything fitted where it needs to be and as neat as possible I m positive i haven t fried anything because i kept making sure i Monitor stays sleeping/no signal - new build was grounded and because Monitor stays sleeping/no signal - new build the computer boots up fine lol it just doesn t show up on my monitor i bought or my old one So my first assumptions is somehow i have a bad GPU but idk it could be something else thats why i am here I would like to see what you all have to say about what could be the issue I tried fitting the Card in my other PCIE express slots also trying different VGA cables aswell as HDMI cables I tested it on two different monitors With all those things tried still no signal I also thought it could be my board but everything else seems to be working fine all fans and LEDs work My Optical drive comes out and my board has the green on light shinning Also connected my phone via usb and was able to charge so im assuming those all work too But anyways Anyone have any ideas all responses would be appreciated The computer specs are listed below Computer Specifications Monitor Acer AT Black quot ms HDMI LCD Monitor Optical Drive Lite-On X iHAS - DVD MOBO ASUS M A XTD EVO AM AMD X ATX Case Rosewill ARMOR Gaming ATX mid Tower PSU CORSAIR Builder Series CX V W ATX V RAM G SKILL Ripjaws Series GB x GB -Pin DDR SDRAM DDR CPU AMD Phenom II X Black Edition Deneb GHz GPU SAPPHIRE - GSR Radeon HD GB -bit Hard Drive SAMSUNG Spinpoint F HD SJ TB Heres links to parts http www newegg com Product Product aspx Item N E Optical Drive http www newegg com Product Product aspx Item N E Hard Drive http www newegg com Product Product aspx Item N E PSU http www newegg com Product Product aspx Item N E MOBO http www newegg com Product Product aspx Item N E Case http www newegg com Product Product aspx Item N E RAM http www newegg com Product Product aspx Item N E CPU http www newegg com Product Produ e amp IsFeedbackTab true amp rdm scrollHelpful GPU http www newegg com Product Product aspx Item N E Monitor BTW- I have no Onboard graphics nbsp

A:Monitor stays sleeping/no signal - new build

Well I haven't gotten any replies yet but, i think i may have figured out my problem, Im thinking my GPU is incompatible with my MOBO somehow. Not sure why because in theory they should work, but who knows. Going to try a different card tomorrow.

I'm still open to suggestions from you all : )

Thanks in advance.
*EDIT* Thread Now solved
 

http://www.techspot.com/community/topics/monitor-stays-sleeping-no-signal-new-build.165624/