Windows Support Forum

What would replace a trigen imperial GLVE motherboard?

Q: What would replace a trigen imperial GLVE motherboard?

I need help finding what would replace a imperial GLVE motherboard for a emachines T2385 Please help

Relevancy 100%
Preferred Solution: What would replace a trigen imperial GLVE motherboard?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: What would replace a trigen imperial GLVE motherboard?

you have an OEM system and there is no guarantee that its case conforms to industry standards and will fit a standard motherboard. but you can still try... what is the current configuration of your system?

http://www.techspot.com/community/topics/what-would-replace-a-trigen-imperial-glve-motherboard.55155/
Relevancy 73.53%

hi all
i need to find a trigem imperial motherboard ver 1.03 manual
imperial gl ve2002629
cant seem to find one any where
whant to see what i can do to it to make it perform better
can u help me
thanks
 

A:Trigem imperial motherboard ver 1.03 manual

Contact Trigem -

http://www.trigem.com/
 

http://www.techspot.com/community/topics/trigem-imperial-motherboard-ver-1-03-manual.119561/
Relevancy 58.05%

The motherboard on my envy 17t-k200 needs to be replaced.  The part number installed on the refurbished machine is 793272-501.  I have found a motherboard, part number 794984-001.  Is 794984-001 compatible with my envy 17t-k200? 

A:can i replace motherboard 793272-501 with motherboard 794984...

Hi, Yes as you can see on the list:      http://partsurfer.hp.com/Search.aspx?SearchText=794984-001 Regards.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/can-i-replace-motherboard-793272-501-with-motherboard-794984/td-p/5681529
Relevancy 55.47%

Hi , 

With recent upgrade of Windows 10 upgrade, my computer XPS 2710 totally black out.  I have been told that mother board is gone and have to replace. With the replacement Mother Board , I think I am required to re-install the Windows 8  and I think it will ask for a Product key , since it is a replacement mother board. Please advise, with the faulty motherboard, forced to replace the Motherboard. how will be go with the reinstallation of Windows 8.   With so many details in the forum about the faulty motherboard of XPS 2710 just because of the Windows 10 upgrade. I am planning to fall back to Window 8 with the replacement mother board, pleaser advise.

Regards,
Sathish.

http://en.community.dell.com/support-forums/software-os/f/3524/t/19679535
Relevancy 53.32%

If replaced original Foxconn N15235 motherboard (2007):
chipset P4M890
Southbridge VT8237A
CPU quadcore Q6600 2.4 GHz (socket LGA 775)
with this one:
Asus P5KPL-AM rev. 1.02g
Chipset ? Intel? G31 Intel ICH7
FSB ? 1600*/1333/1066/800 MHz (*1600 is overclock speed)
With the same ram and CPU, Windows 10 is able to start?
Of course afterwards It will necessary to reinstall driver.

http://www.tenforums.com/drivers-hardware/52248-replace-motherboard-what-happens.html
Relevancy 53.32%

Hi

My system is 4 years old.

The motherboard is a MSI - MS 6585
Chipset SiS 648
ATX Form Factor.
CPU - Socket 478 for P4 processors (Willimate 478 and Northwood 478)
with 400/533 MHz (100/133Mhz QDIR)

Mine is a 2.8 GHz

I have 1GB of RAM - PC2700

I cannot seem to find a replacement mobo.

MY QUESTION

This is my first time changing a mobo.

Because my CPU and chipset are as above - am I restricted to what
replacement board I buy?

In other words, do I have to locate a motherboard with the
exact specs as my old board has?

Or can I upgrade to a more modern one.

I'm really in the dark here - any help would be appriciated.

Thanks, Stephen
 

Relevancy 53.32%

Running XP Pro, If I replace the motherboard, will I have to reinstall XP? I am tyring to do this as painless as possible. If there is a way, Please help.
 

A:Need To Replace Motherboard

It's always best to do a clean install of your OS when changing the motherboard in order to prevent any sort of driver / hardware conflict.

However, there are ways to avoid a full install of the OS. Read through the following links:

http://www.theeldergeek.com/replace_motherboard.htm

http://arstechnica.com/hardware/new...-motherboard-without-reinstalling-windows.ars
 

http://www.techspot.com/community/topics/need-to-replace-motherboard.145869/
Relevancy 53.32%

I REPLACE MY MOTHERBOARD WITH A NEW ONE.BUT
AFTER I DID THE INSTALLATION AND BOOTED THE SYSTEM UP I HAVE NO VIDEO. WHAT DID I DO WRONG?
 

Relevancy 53.32%

Hello nbsp I have emptied a full glass of water into my laptop motherboard Replace in Y50-70 I've send it to repair and they concluded that the motherboard is dead and the price for a new motherboard is more than the price I payed for the laptop from the beginning nbsp My last option is to replace the motherboard with a used one myself and so I will nbsp Now to the question Can I use an other motherbord than EXACTLY the model in my laptop I have done a lot of research and it looks like Replace motherboard in Y50-70 most Y - motherboards are identical nbsp My y - Model Name S N CB CPU nbsp INTEL CORE I Replace motherboard in Y50-70 H GHZGFX NVIDIA GeForce GTX m nbsp The motherboard in my dead laptop is nbsp B F nbsp SHOULD it then nbsp be the nbsp EXACT nbsp same model B F i replace it with orCan I replace it with any y - motherboard for example with i and GTX m or nbsp Can I replace with an other motherboard with the same Model Name but better specs nbsp I hope you guys can help me out here IMG jpg KB

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Replace-motherboard-in-Y50-70/td-p/3445894
Relevancy 53.32%

I just ordered a new Asus A7V333 motherboard and would like to replace my old ECS motherboard myself.

I know how to physically remove the old one and put in the new one but what I'd really like to know is if I need to delete any or all drivers that pertain to the old motherboard (audio driver and such).

Any other advice to make the transition any smoother would also be greatly appreciated.

Thanks.
 

Relevancy 52.89%

Hi all - I tried to find this in the forum first - it may be I just don't know what to look for and if so, I apologize. My T61 (6459-CTO) has a bad motherboard.  It's still a great machine and I'd like to replace the motherboard.  Can someone point to: (a) somewhere where I can figure out which motherboard to replace it with (and if possible, a source) and(b) instructions/video on how to do the replacement? Thanks Mark










Solved!
Go to Solution.

A:Replace motherboard for T61 (6459-CTO)

Instructions on how to disassemble the computer and replace the motherboard should be in the Hardware Maintenance Manual (HMM).  Sorry, I don't have the link but you should be able to search for it on this forum.  



KeithFormerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891Currently T420 4177-CTO, T430 2347-A54, T430 2349-L64, T430 2347-UN9, T430 2342-CTR, Ideapad K1, H520S 2561-1LU

https://forums.lenovo.com/t5/ThinkPad-T61-and-prior-T-series/Replace-motherboard-for-T61-6459-CTO/td-p/646883
Relevancy 52.89%

Hi,

So I didn't look on google before I put in a new motherboard and CPU, and now my computer won't boot at all. Even when I try to do a repair installation it always fails when it comes to the reboot bit.

Are there any solutions for this, I don't fancy losing all of my files.

Luke.

A:Motherboard and CPU replace - will not boot

Hi,

If you didn't prepare the drive before the move and also Repair install fails, your options are getting limited. What I would do is install another drive and put your OS on it with a clean install. Then, take the drive with your data on and put it in there as a slave so you could get your data off.

http://www.techsupportforum.com/forums/f10/motherboard-and-cpu-replace-will-not-boot-85376.html
Relevancy 52.89%

I am try to test a Intel Celron 733 (66Mertz) on a Compaq DeskPro EN Small Form Factor with 370 socket (FSB is 100Mertz for Pentium III 500). Bacause Celron is running under 66 Mertz. Will it fry the Processor? Will the motherboard is smart enough to downspeed it to run 66Mertz? I read the Compaq manual that the motherboard it will support both 66/100Mertz. That is another SW to set the Processor Multiper. What multiplier should I use ?

Thanks for the help inadvance.
 

Relevancy 52.89%

I recently replaced my motherboard in my Solo 9300 which has windows XP. Since I've change it when I first turned the computer on it automatically opened the wizard for installing new hardware. Then I tried the internet and I get the IE screen put the page says the internet cannot be found. Since I purchased this computer used I don't have any of the cd's which I most likely need.
Please Help! I need the Windows based computer on the internet for my work.
 

Relevancy 52.89%

Processor a Main Circuit Board b
2.60 gigahertz Intel Celeron
8 kilobyte primary memory cache
128 kilobyte secondary memory cache Board: TriGem Computer, Inc. Imperial 1.01
BIOS: Phoenix 6.00 09/16/2003

Is it possible to put a new/better processor on thes motherboard? Any suggestions?
Thanx, xroads
 

A:Can I replace Processor on motherboard?

Sure its possible.

What processor are you looking to upgrade to? If you are upgrading to a p4, you should make sure your mobo supports that processor. Give me a little more info on what you are trying to upgrade to. Do you have the mobo book. It should say what processors it supports.
 

http://www.techspot.com/community/topics/can-i-replace-processor-on-motherboard.29260/
Relevancy 52.89%

Hi, I want to update my system. Im hoping to get a new motherboard, processor, and ram. im hoping for the ram to be 2048mb and the processor to be around 2.4ghz. also if the videocard could be agp on the motherboard that would be great, because i have an atx x800 xt and just got it a while back and it was very expensive, but if i need to replace that i could just sell it on ebay. i posted some screen shots at the bottem (from cpuz) so you can see evry detail about my pc. thanks so much -Nick
 

A:Want to replace my motherboard, processor, and ram need help.

you have another post stating that you want to get another socket-754 processor for you existing motherboard.

now this post states that you want to get a new mobo too?

honestly I would not suggest getting another processor for a socket-754 system because it will still be bottlenecked by the slower hypertransport bus and single channel ram.

if you still want to use your AGP card and still have the ability to uprade to PCI-E in the future, consider this mobo I used it myself until a month ago and it worked great. and it has gotten very good reviews. it also lets you upgrade to AM2 when it eventually is worth it to do so (i.e. K8L)
 

http://www.techspot.com/community/topics/want-to-replace-my-motherboard-processor-and-ram-need-help.53685/
Relevancy 52.89%

Long story short I spilled some liquids onto my PC The problem at first seemed to be my PSU which at the time was a RM So I replaced it with the RM when i i replace my point?? CPU and this Should at motherboard tried booting it up i had a black screen but everything else turned on No motherboard or any type of screen appeared everything else seemed to be running fans liquid cooler gpu however my mouse and keyboard wouldn't but my microphone did have a lit light on which mean it was being powered After that i decided to replace a cable on my psu and it had a short circuit which I'm guessing fried my psu once again because a burning smell appeared but Should i replace my motherboard and CPU at this point?? it smelled brand new similar to the psu hopefully you understand what i mean xD So now my psu my a clicking sound everytime i try to start it but i wont stay turned on anymore I want to know if i should replace my motherboard and cpu or should i try changing my PSU only And maybe recommend a build with GTX Ti Any help would be appreciated thanks My build CPU i k GPU PNY GTX Ti Motherboard MSI z -g RAM gb Corsair Vengeance PSU Corsair RM w

A:Should i replace my motherboard and CPU at this point??

What do you mean when you say "you spilled some liquid onto your PC"? Where did the liquid actually get spilled...on to what?

http://www.pchelpforum.com/pc-hardware/127446-should-i-replace-my-motherboard-cpu-point.html
Relevancy 52.89%

Hi, Today i replaced my motherboard of my hp g62 A18-ed. it's my second mb I installed. First one didn'tpower on at all. This motherboard will power on. Wifi led will blink. Fan spins for 5 sec, then stops and after10-15 sec it wil spin again. Screen stays black. Seller guaranteed that this mb is 100% ok and tested before. Tried this MB in a other G62 case, still same problem. Tested with minimum hardware. Only ram, display andpower switch. Seller advised me to use single-sided ram. I think this is not the problem. The ram I use worked on previous MB. Tried other CPU allready. Anybody a solution? Regards, Roy.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/597674-001-motherboard-replace/td-p/5638523
Relevancy 52.89%

I think I have damaged my motherboard - I was trying to clone a quot hard disk as an upgrade for my laptop and managed to connect the to Think replace? motherboard - damaged I've how drive incorrectly to the IDE asaptor I was using Net result is that system setup is now unable to recognize any hard disk I connect to the IDE cables though CD DVD drives are OK I ve tried both IDE sockets different cables different Think I've damaged motherboard - how to replace? drives etc etc So pretty sure the motherboard is damaged in some way Luckily my normal drives are SATA so ok for now But my question is unless someone has a magic fix for the above - how do I work out what motherboard to purchase as a replacement The system is a Dell Dimension with a GHz P cpu The motherboard has the following number on it - DS N CN- Y - - S and AA C - Is there anything else I should bear in mind Will I have difficulty getting the XP license to transfer OK nbsp

A:Think I've damaged motherboard - how to replace?

You'll have to get the exact same motherboard, which means going back to Dell or buying one on eBay. Putting non-Dell boards into a Dell can be tricky and you are not allowed to use the Dell Windows XP license with anything except the mainboard that comes or is an approved replacement for the system.

But have you tried to clear the CMOS? There should be either a button, switch, or jumper to do this. Check the Dell site. And make sure the IDE just isn't disabled in the BIOS or set to None as that can happen.

You can also add a PCI IDE controller card to replace the IDE on the mainboard.
 

https://forums.techguy.org/threads/think-ive-damaged-motherboard-how-to-replace.758788/
Relevancy 52.89%

Hello guys, I assembled my desktop three years back with I5 650 processor - Socket LGA1156 | 4 GB DDR3 RAM | Intel DH55TC Motherboard. Recently I started having issues with my motherboard and system does not start. When i gave it for service, I was told that I need to change the motherboard which would cost around 8-10K. I was also suggested that Motherboard plus Fourth Gen Intel processor costs around 15K and its better to get a new one as the I5 650 is relatively old which might stop working soon.

Appreciate any suggestion.

Thanks in advance.
 

Relevancy 52.89%

I have been conscripted to replace a motherboard on an IBM Thinkpad A21e model 2628. IBMs support site has nothing on the procedure. I replaced a motherboard on a Dell laptop about a year ago and their website was quite helpful. If anyone could point me to some resources, it would be greatly appreciated.
Regards
Sean
 

https://forums.techguy.org/threads/replace-motherboard-ibm-thinkpad.152280/
Relevancy 52.89%

It is a Compaq Presario SR5210NX with a 945gct-hm rev-1.0 b motherboard that is no longer functional. I need to know what motherboard to get and where best to look for it.Also, since I'm replacing it, I was thinking on getting a different processor too. It currently has a Intel Celeron 420.

A:I need to replace the motherboard on my computer.

What makes you so sure the motherboard is bad?

http://www.computing.net/answers/windows-vista/i-need-to-replace-the-motherboard-on-my-computer/13564.html
Relevancy 52.03%

Hello.... I need to replace the motherboard on my yoga 1 13 inch.  Is it possiable to replace the motherboard with a yoga 2 or 3?  Thanks in advance 

https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Can-I-replace-Yoga-1-with-Yoga2-or-3-motherboard/td-p/3414769
Relevancy 52.03%

I have an Emachine #2792 and I think the mother board went out.
I replaced the power supplied with 350w and still can't get it to boot up.
All it does is the light on the front pannel goes on and off really fast, but the
CPU fan runs. I had heard that these machines only last about two years and that is how long I have had it. I would like to know if it would be worth putting in a new mother board. I heard that they do not make the same mother board.
The sep. are: CPU,CELERON 2.7GHZ 478P 128k F400, FDD Model:FDD, SFD-321B/LTGNQ
Old mother board is a IMPERIAL GV-MBEM100979IM
If anyone could help that would be great.
 

A:Emachine #2792 Replace Motherboard with what?

that is a socket 478 mobo. you can get a good Asus P4P800SE if your case takes a standard sized ATX board.
 

http://www.techspot.com/community/topics/emachine-2792-replace-motherboard-with-what.52683/
Relevancy 52.03%

I have an Optiplex GX280 Minitower. The motherboard seems to ailing, I suspect as the result of running the BIOS update. Has anyone replaced the Dell board with an ATX board? I realize this is not a drop in but there seems to be plenty of room. Boards are available at around the same price as a refurbished Dell board and don't have the limitations of the Dell board. O/S is not an issue. After the change the only remaining original components would be the case, front I/O assembly and possibly the heatsink. I have a pentium E5400 without a home and would like to use a board that will run it. Thanks. Mike
 

Relevancy 52.03%

I have a lenovo Y470 laptop and it's beyond warranty. I've done fan cleaning many times and reassemble it back perfectly every time. Now that the laptop is beyond warranty and with a dead motherboards. Since I can't afford a new laptop, is there any chance that I can replace it by myself?
I've surfed online and have found lots of disassembly guides and videos on youtube. So disassembly seems easy for me.
And I've searched a compatible motherboard. Should I order it and replace by myself?
https://www.empowerlaptop.com/p/lenovo-y470-motherboard/ 
I hope there's someone gives me some advice. Thanks in advance.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity and moved to the proper forum
 

A:Y470 - Any chance to replace motherboard by myself...

If you are comfortable working inside your laptop then there really isn't any reason not to replace the motherboard.  Just take your time and keep track of all the little screws and where they go.  Personally, I use a muffin tin to keep all the various screws separate.  I mark each bin on the tin with a brief description of where the screws go, example: back cover, keyboard, palm rest, etc.  Also take care when unplugging the various cables.  Some of the connectors on the ribbon cables have different types of release latches. Some slide in while others may flip up.   Your videos will be of assistance with those.
 
I sure you have it already, but if not here is a link to your model's Hardware Maintenance Manual.  The manual not only offers dis-assembly instructions, but has additional tips and pre-cautions to follow.
 
https://download.lenovo.com/UserFiles/UserGuide/en/User's%20guides%20and%20manuals/Y470Y570/Lenovo%2...

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y470-Any-chance-to-replace-motherboard-by-myself/td-p/3383816
Relevancy 52.03%

Hi, I have question about replacing motherboard.. I have motherboard from HP Pavilion 15-N072SG fully working. My friend have Pavilion 15-N207SA which is not working /when he insert the charger, the charger port light illuminates but when he press the power button it does not switch on/ So my question is can I replace motherboard in Pavilion 15-N207SA with a motherboard from  Pavilion 15-N072SG?  Thanks

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Replace-motherboard-HP-Pavilion-15-N-series/td-p/5613296
Relevancy 52.03%

Ok so first let me say thank you for any and all help I may receive here THANK YOU In I built my own computer and it worked fine In a three or four years I added ram and no longer had a working computer It got really hot and I put the old back in but damaged motherboard replace new to with older help already damaged help to replace older damaged motherboard with new I tried to buy a new motherboard like the one I had but it was discontinued then So I set my homebuild aside and got a hp at walmart which I help to replace older damaged motherboard with new still use by the way Fast forward to today and I want to get my homebuild working again only better than ever Which is why I am here seeking a good solution to my problem motherboard mb gigabyte ga-ep -ds l p rt cpu intel c q q g m r graphics card vga evga -p -n -ar gs m power supply psu ocz sxs w rt ram mem gx g sk f - cl d- gbnq r hard drive hd g st k m sata st as card reader rosewill rcr- rtl dvd burn asus drw- s t x rt cpu cooler arctic p acfz -pro r windows xp Is there a modern quality motherboard I can just plug in or perhaps this whole setup is so dated that it would be best to just basically start over with modern stuff and maybe reuse some components or maybe not Opinions and advice appreciated Thanks nbsp

A:help to replace older damaged motherboard with new

I don't mean this in a bad way....but that system is about 7 generations old.

The only possible thing that be worth saving might be PSU, but if it was me I'd sell it as is and get what you can outta it and put it towards a new build.
 

https://forums.techguy.org/threads/help-to-replace-older-damaged-motherboard-with-new.1165107/
Relevancy 52.03%

Please advise me what is the proper part number of complete motherboard needed for T61P (6457-5KU) S/N L3Z9650 /08/06 PID 64575KU

https://forums.lenovo.com/t5/ThinkPad-T61-and-prior-T-series/Replace-motherboard-for-T61P-6457-5KU/td-p/3395207
Relevancy 52.03%

My motherboard is dead (680569-501). I buy a wrong motherboard (680570-001). The new motherboard don't have UEFI and not see my HDD. What can do? Jorge

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Is-possible-replace-a-hp-680569-501-motherboard-with-hp/td-p/5665488
Relevancy 52.03%

Wish I d motherboard toast. it is What Emachines with? replace to read the post about the power supply It destroyed my son s motherboard It s a T Emachines told me to replace it with their FIC VG Emachines motherboard is toast. What to replace it with? which is a socket Pentium based on chipset Intel GE FSB MHz Since my son has not backed up his music files he could Emachines motherboard is toast. What to replace it with? just replace it with the VG and everything should work My question is do I have to do that There are some Intel boards that look like they might be better but I m a real novice This is an old machine and I don t want to spend a fortune Do I get a new motherboard CPU or can I just buy a new motherboard and use the old CPU There s an Intel D GEBV S FSB DDR ATX A V WB Intel Pentium processor in a PGA socket with a MHz system bus It s only from Hyper Microsystems Is it okay or should I go for a better model My son is a musician and his girlfriend does lots of graphics Any recommendations would be appreciated Eventually we ll just have to upgrade to a better machine but for now I just want the thing to work nbsp

A:Emachines motherboard is toast. What to replace it with?

I would just get a new system that is upgradable at a later time. I don't want to be biased since I own a Dell but you could go to Walmart and buy a whole new system that can be upgraded a component at a time at a later date. I bought mine from Dell before they were available retail. Just a suggestion:

http://www.walmart.com/search/searc...query=dell&ic=24_0&Continue.x=27&Continue.y=5
 

http://www.techspot.com/community/topics/emachines-motherboard-is-toast-what-to-replace-it-with.81550/
Relevancy 52.03%

Hi,

I have a Soltek SL-75LIV motherboard running Win98 (P3 900) & latelty the graphics have been going on it. So I want to replace the video card on it but its one of those fully intergrated motherboards (No agp slot). This particular mother board has 3 PCI master bus slot, 1 ISA slot, & 3 DIMM slots. Can I place a new graphics card in this type of motherboard or does this mean that the whole stytem is no good & I need to buy a new computer. Unfortunately Im not a techie so any info you can give is apprectiated.

Thank you
 

Relevancy 52.03%

 I need to replace my motherboard hp pavilion . These are the data that I have . Motherboard: DA0LX8MB6D0 REV D
HP SPARE 595131-001
What other devices would serve me ?
Thank you

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Replace-Motherboard-HP-Pavilion-dv6-3000/td-p/5650949
Relevancy 52.03%

So my lenovo suddenly shutdown after i upgrade my nvidia driver and it wont start at all even when i charge it no led light appear so i send it to technician and said the motherboard is busted but it cost like 600dollar so im asking if anyone know a trusted site to buy a motherbboard from it or trusted sellar i live in iraq so in my country there is no one sell those here i saw in site that they cost 140-200 but the one that cost 200 is used so im confused about how much does the motherboard cost  thanks
http://www.ebay.com/itm/Lenovo-Y50-70-Laptop-Motherboard-Intel-i7-4700HQ-2-4GHz-CPU-LA-B11P-5B20F788...
http://www.ebay.com/itm/Motherboard-Lenovo-Y50-70-w-Intel-i7-4700HQ-2-4GHz-CPU-5B20F78873/1118695760...
 
 
Moderator comment: Bumping more frequently than 3 days unfairly pushes other members' threads downwards. Bumping post(s) removed.

Relevancy 52.03%

I need to puchase a new motherboard for my desktop computer.  I think I can install it and hook everything up, I just not sure what to purchase.

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/What-motherboard-would-i-purchase-to-replace-HP-slimline-S5/td-p/5668597
Relevancy 52.03%

I bought a motherboard for C55B (price was good, good), motherboards C50B found were too expensive. I installed it without problem. This card has no outlet to the fan (I saw it when I bought). This is the first time I see it. I started to test this C55B running but the fan does not start because not connected.
Two questions:
1-Have you seen already motherboards without taking fan on laptops? If so, which then connects to the fan?
2-I took the decision C50B (what I had expected when I bought) and I welded in the space provided on the C55B. I started. Everything is good but the fan does not turn on (the fan is good and my welds too). Opinions?

https://forum.toshiba.eu/showthread.php?93875-Motherboard-failed-to-replace-on-Satellite-C50-B-14E
Relevancy 52.03%

Hi I have a Imperial GL VE that I want to install my Radeon 9600 XT on but I can't find the company's website so I can download the driver. Any help you can give would be greatly appreciated.
 

A:Where to get AGP Driver for Imperial GL VE

Welome to TSG.(Not that I represent TSG or anything, I'm just some guy that would like to welcome you to TSG )

You can't find ATI's website?

The type of motherboard you have should have no bearing on video drivers, just download the Radeon driver package from ATI and you should be golden.

I'd start here.
 

https://forums.techguy.org/threads/where-to-get-agp-driver-for-imperial-gl-ve.412226/
Relevancy 51.6%

Hey to all the people seeing this! First of all thanks for viewing this thread ^^

Right, You may have seen my posts about a faulty motherboard not giving video, If not then it doesn't matter to much because this is the story:
I needed to replace a motherboard as the old one was bad.
The New motherboard came, Still no Video, Dead motherboard
Sending the faulty one back for a refund

NOW heres the dilemma:
I can't find the motherboard again so I'm going to replace it with another ones (make/model not yet decided) But how do I go about installing the drivers for the new one? I've searched Google yet the only thing I could find is being able to boot up the computer to un=install the old ones? Is there anyway to do this without booting it up prior to installing the new MOBO? Many thanks, Mark ^^
 

Relevancy 51.6%

title says it.

the motherboard is a pci express ht2000. I want to upgrade to a 500w power supply, but I've read that certain motherboards will only have room for 20 power connectors and certain power supplies may not work because of that.

In short, I've searched a lot to no avail trying to find out if I can upgrade my power supply. Any help here would be greatly appreciated.
 

A:I want to replace power supply, not sure if motherboard is compatible

Is it an AMD board? AMD SW300?

In any case, replacement power supplies often come with both types. But you could always count them, too.
 

https://forums.techguy.org/threads/i-want-to-replace-power-supply-not-sure-if-motherboard-is-compatible.1031996/
Relevancy 51.6%

Hello,        Just wondering if it's possible to replace the motherboard of my laptop with a higher one? Or just the video card with a GTX and not a GT. Thanks in advance. Acer Aspire V15 Nitro (VN7-571G-73ZJ) Intel Core i7-5500UNvidia GeForce GT 940M8GB DDR3L 

A:Replace/Upgrade motherboard and video card?

video card is possible but more is not feasible, however checks your video card it is not welded, if welded is not possible to change the video card and if not welded still have more of a problem, you should check your motherboard supports other type of plate to be installed and also if the driver will be compatible with your motherboard. Already the motherboard if the same model that its possible ée yes replace the motherboard to get a good upgrade, Best Buy and even better that is more viable. I have helped (Used Translator)




Se eu fosse útil, um Kudos é apreciar e lembre-se de marcar Aceitar como Solução se o seu problema foi resolvido . Conhecimento adquirido deve ser compartilhado pois assim podemos fazer este mundo Melhor.Acer Aspire 5733 - 6668 Core I3 4GB 1066 2X2,HD 500 , Windows 10 Pro Insider 19393.5

http://community.acer.com/t5/V-and-VN-Series-Laptops/Replace-Upgrade-motherboard-and-video-card/td-p/444828
Relevancy 51.6%

Hi Guys thanks in advance for reading my post I have an Old Gateway Pentium D GHz GB ram DDR GB HD model number that It’s a to Gateway replace Motherboard? possible? native How GT5012 even Gateway GT with a pair of LG Blu Ray Optical Drives How to replace a Gateway GT5012 native Motherboard? It’s that even possible? I am into the blu-ray wagon so I ve been backing up my HD How to replace a Gateway GT5012 native Motherboard? It’s that even possible? documentaries and most important movies and files into Blanks BD media however I ve been having issues with big files and blu ray movies It s How to replace a Gateway GT5012 native Motherboard? It’s that even possible? taking between - hour to burn files of GB Movies like King Kong and Kingdom of Heaven Director s cut will take more than hours I am using DVD Fab and my OS it s the crappy Windows XP Anyway I am trying to do a make over and I know my limitations The specs of my motherboard says clearly that it will not support CPUs other than Pentium Ds or lower No support for Quad cores or core duo Building a new computer it s not an option right now A friend of mine said that upgrading to Windows will fix part of the issue he saids that Windows XP wasn t build for those tasks Here is the question How can I find a compatible mother board that can replace the one I have right now and supports Core duo or Quad cores CPU I want to be able to use the Gateway s PC case and recycle some other components they are in good condition I called Gateway and they said they would not support any upgrade and won t give me any info Thanks in advance for any help that you may provide These are my motherboard specs This is the Intel Cortez G Motherboard Features include Intel G chipset Supports Intel Pentium and Celeron D processors and Pentium D dual core processors LGA socket or MHz system bus Memory support for DDR DDR or DDR MHz DIMMs expandable up to GB Integrated Intel Graphics Media Accelerator Integrated Intel High Definition audio using Sigmatel Intel Integrated LAN Two PCI conventional one PCI Express and one PCI Express add-in card slot nbsp

A:How to replace a Gateway GT5012 native Motherboard? ItÂ’s that even possible?

https://forums.techguy.org/threads/how-to-replace-a-gateway-gt5012-native-motherboard-it%C2%92s-that-even-possible.996620/
Relevancy 51.6%

I have a seven year old presario 2511EA laptop. She works but she is slow. Norton 2010 running on it does not help. Is there any to speed her up such software, changing cpu speeds ( currently 2.4Ghz P4) or replacng either memory, cpu or whole motherboard ?
 

A:Should/can I replace motherboard/memory/CPU Presario 2511EA

Motherboard replacements that fit that case are also slow. You are limited by the maximum of 1 GB of pc2700 memory in two 512 MB modules... and it is the memory that makes the biggest difference... Not the CPU speed.
You cannot find a motherboard that will be faster and still fit all the ports and plugs on the case... There are some mighty decent laptops that will be much faster and run at least 2 GB of memory that would be a better choice... Dell, some Acer, Lenovo, Asus... as well as newer Compaqs or HP's.
Prices will be low for the rest of the summer after high school and college graduations are over... and some sellers will give you a significant discount to reduce inventory. The prices will go back up, but with new models that are faster and run 4 GB of memory or more.
Treat yourself to a Windows 7 machine with the potential to run 4 or 8 G B of memory... a quality build will last you anlother seven years.
 

http://www.techspot.com/community/topics/should-can-i-replace-motherboard-memory-cpu-presario-2511ea.147404/
Relevancy 51.6%

Hi there, i have a failed dell 1558 motherboard and i want to replace with a motherboard witch has the same geometry but slightly different serial number . There would be any compatibility issues?

The failed one has serial number : <ADMIN NOTE: serial number removed per privacy policy>
The other mobo has serial number: <ADMIN NOTE: serial number removed per privacy policy>

Thank you in advance!

http://en.community.dell.com/support-forums/laptop/f/3518/t/19682818
Relevancy 51.6%

Hello,        Just wondering if it's possible to replace the motherboard of my laptop with a higher one? Or just the video card with a GTX and not a GT. Thanks in advance. Acer Aspire V15 Nitro (VN7-571G-73ZJ) Intel Core i7-5500UNvidia GeForce GT 940M8GB DDR3L 

A:Replace/Upgrade motherboard and video card?

video card is possible but more is not feasible, however checks your video card it is not welded, if welded is not possible to change the video card and if not welded still have more of a problem, you should check your motherboard supports other type of plate to be installed and also if the driver will be compatible with your motherboard. Already the motherboard if the same model that its possible ée yes replace the motherboard to get a good upgrade, Best Buy and even better that is more viable. I have helped (Used Translator)




Se eu fosse útil, um Kudos é apreciar e lembre-se de marcar Aceitar como Solução se o seu problema foi resolvido . Conhecimento adquirido deve ser compartilhado pois assim podemos fazer este mundo Melhor

http://community.acer.com/t5/V-and-VN-Series-Laptops/Replace-Upgrade-motherboard-and-video-card/td-p/444828/jump-to/first-unread-message
Relevancy 51.6%

HI.I'M FROM RUSSIA . I have HP 255 G3 LOCKED master PASSWORD BIOS . TECH SUPPORT SENT ME THE CODE HE WAS NOT EFFECTIVE THEN THEY CONSULTED WITH SENIOR MANAGEMENT AND GIVEN THE ANSWER ... JUST HAVE TO CHANGE THE MOTHERBOARD AND IT WILL NOT BE FREE EVEN IF THE LAPTOP IS OUT OF WARRANTY . HE'S ONLY SIX MONTHS , IT HAPPENED A SECOND TIME , IT COULD BE A FACTORY DEFECT , THE FIRST TIME I TRIED THE PASSWORD SEVERAL TIMES AND IT WAS SUCCESSFUL . IN THEIR VIDEO TRAINING ANOTHER COUNTRY, I GET REDIRECTED TO RUSSIA.CAN THAT WILL ADVISE?

http://h30434.www3.hp.com/t5/Business-Notebooks/to-replace-the-motherboard-because-of-the-BIOS-lock-password/td-p/5828920
Relevancy 51.17%

My Laptop is out of warranty and does not power on. No response to any attempt to start it.
I approached Dell Technical Support which guided me to go to local technician. He could not repair the laptop.
Then I went to Authorized Dell Service Centre in Gurgaon, India. There after initial diagnostics I was informed that the PPID tag on the motherboard was missing and so they can not replace the motherboard. I approached them again and verified with the Technical support yet no help.
The only solution offered was to sell the laptop when a simple replacement can easily solve the issuee. All this is being prevented by a small piece of PPID tag gone missing!

http://en.community.dell.com/support-forums/laptop/f/3518/t/19995483
Relevancy 51.17%

What if I replace the motherboard with the exact same model BUT change processors? Will I have any issues?
Was in the process of updating the bios. Not sure what I did wrong but it's dead. Have to send it back to super micro. I ordered an identical motherboard. But was updating the bios so I could switch from a quad core westmere chip to a hex.
Everything I have read states the OS is married to the motherboard (Win7 64 OEM). So if I get away with no issues from the motherboard swap, will the processor swap give me issues.
My system is a dual boot ubuntu 64/Win7 setup. I don't want to reinstall if I can help it. Advice would be appreciated.

(thanks admins for correcting this. Didn't mean to hijack that other thread)

A:Replace motherboard with exact same model BUT change processor?

you should not have any problems with Win7 even if its an OEM version. MS can reset if you have to call don't worry, just call them and explain what happened they are not going to crawl through the phone line and tear your head off or anything.

http://www.sevenforums.com/installation-setup/172510-replace-motherboard-exact-same-model-but-change-processor.html
Relevancy 51.17%

Looks like I'm gonna need to replace the mobo and I need some guidance on how to remove the liquid-cooling apparatus. The heatsink has some copper tubing that carries the coolant to and from the "radiator" which is located in the higher compartment. There must be a trick to it. I have searched but cannot seem to find a manual.

Can anyone here help me with this?

TIA,

MisterMike
 

https://forums.techguy.org/threads/sony-vaio-vgc-ra825-replace-motherboard-question.1049557/
Relevancy 51.17%

I was experimenting with my brothers desktop It seemed need find corrupted motherboard? new chip or do replace to BIOS a I like it was running well Still one of his drives an SATA Samsung wasn t displaying it s icon on the my computer screen that shows you which devices are attached Either he accidently shorted the drive cause he refused to use a surge suppressor Still the main drive worked o k Sadly his desktop was purchased used So the seller had no recovery disks or an original Vista Pro operating system disk in the event the files became corrupt I recall his system started having problems after I installed HandBrake to convert video to mp I also installed DVD to decrypt movie discs I m not sure if those warez were compatible with Vista My brother had installed an EVGA gtx PCI-e graphics which BIOS corrupted do I need to replace chip or find a new motherboard? I updated the drivers for it He mainly wanted it for gaming and editing video I BIOS corrupted do I need to replace chip or find a new motherboard? had read that updating the bios chipset drivers could increase performance and eliminate hardware incompatibilities I think his OS was an OEM version which sucks Finally using my neighbors Wi-Fi I went to the chipset maker to update his motherboard chipset drivers and or bios update or firmware i m confused The site had an BIOS corrupted do I need to replace chip or find a new motherboard? online updater to assist with the install The motherboard developer was MSI so I went directly to their site I knew there was risk updating the firmware but I decided to take the risk It started updating it automatically backed up the current bios firmware Then cautioned to proceed with the install It then went into a very awkward GUI screen the program initiated After that happened all functionality was lost no way to exit Some status bar was filling up So I let it run it s course for several hours I noticed on-screen some cheap colored bars some program text and the status bar seemed like it froze up I wasn t sure if it was still connected to the wifi network If my neighbor turned off his router or the adapter was still communicating Reason why I tried this method of updating Was because my brothers PC lacked a fully functional floppy drive There was no floppy drive installed I somehow felt that if I shutdown the PC it would be bricked I was right in bricked no video or post messages or DOS like screens I could turn it on but not shut it down I had to switch the power supply main switch to off So then I thought would replacing the mother board with the exact same model and connecting the hard drive and other components allow the PC to boot into Windows Vista or can the bios chip be reprogrammed The board no longer is sold by MSI it s a P Neo MS v Is it any easy task replacing the seated bios chip And if I managed to replaced or have installed by a skilled technician would the OS recognize the motherboard and bootup Since it s an OEM it could detect the chip and unauthorize access unless someone hacked the system That I could never do myself nbsp

A:BIOS corrupted do I need to replace chip or find a new motherboard?

Sounds pretty bad...You would need to swap out the bios chip with a working one temporarily.

Read this and this.....
 

http://www.techspot.com/community/topics/bios-corrupted-do-i-need-to-replace-chip-or-find-a-new-motherboard.149866/
Relevancy 51.17%

Hi,

Anybody knows or have tried changing your motherboard model DV2000 series DV2022TX part number 417035-001 with 417036-001? My motherboard has a GPU problem nvidia, so i'm thinking if i can replace with motherboard 417036-001. Since 417036-001 is using intel chipset rather than 417035-001 is using nvidia GPU which has a lot of problems with blank screen etc.
 

https://forums.techguy.org/threads/dv2022tx-motherboard-original-417035-001-replace-with-417036-001.994050/
Relevancy 50.74%

Okay, this is random, but I try to install the game but it just closes the menu and nothing happens after I click on the "install" button, I have had this game installed before, but, it was so long ago I don't remember how I got it on there. I even have an image file and when you run that it does the same thing and there is nothing wrong with the disk, no scratches. I'd really appreciate help with this.

If you know anything about this problem and how to fix it can you please post a resolution or statement in this thread. I didn't post this in the Imperial Glory forum because it won't let me post for no reason.
 

A:Imperial Glory? Can't Install Game....

This menu comes up and wen I click "install Imperial Glory" nothing happens... it just closes.
 

https://forums.techguy.org/threads/imperial-glory-cant-install-game.498239/
Relevancy 50.74%

Hi,
I own a Vostro 3550 with i5-2410M, however the mainboard is apparently defective - the notebook is not starting anymore. Now I have the opportunity to buy a second Vostro 3550 and I intend to use the parts for repairing my own Vostro, however this one has only an i3-2310M CPU. Question: is the motherboard the same and I can use this for exchanging or have both version different montherboards?
Thanks and regards,Joachim

http://en.community.dell.com/support-forums/laptop/f/3518/t/19996512
Relevancy 50.74%

I am thinking about upgrading my computer by purchasing higher RAM, a higher capacity Hard Drive, Etc, but I wanted to ask should I upgrade my computer with the Motherboard that I currently have or should I purchase a new motherboard and then upgrade that one? I am worried that if I purchase RAM now, It wont be compatible with another motherboard if I need another type.

Please help!
 

A:Solved: Should I continue to upgrade or should I replace my Gigabyte GA-8IK1100 Motherboard?

https://forums.techguy.org/threads/solved-should-i-continue-to-upgrade-or-should-i-replace-my-gigabyte-ga-8ik1100-motherboard.563813/
Relevancy 50.74%

Your authorized repair center at Bestbuy just notified me that I need the motherboard and DC Jack replaced on my HP ENVY. Model # provided above. They are returning since they were unable to get parts for this model. and stated I would need HP to repair  Envy will not power on and has power issues. I would like to know approximate costs of this repair before moving forward.  Since it has been diagnosed and repairs needed outlined by your authorized repair center can you let me know what cost would be to have HP make repair.  Also provide address to send device to for repair. It is not under warranty.  Thank you. 

A:repair cost to replace motherboard and dc jack on Envy Noteb...

Hi, I think they could not find it due to no available part any where even at HP part store:        http://partsurfer.hp.com/Search.aspx?SearchText=782619-501 And no part list available:       http://partsurfer.hp.com/Search.aspx?SearchText=J9K65UA It is mentioned on page 64 of the Maintenance and Service Guide once. I did try eBay, Amazon and blank. This forum is for you and me. Please contact HP in your country for help. Regards.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/repair-cost-to-replace-motherboard-and-dc-jack-on-Envy/td-p/5754553
Relevancy 50.31%

Hi,
I have both Windows XP and Office XP. Currently, I'm working on a Word document in which I need to set the margins all around to 1.5". My software, however, is only giving me measurements in cm.
I tried, following some advice, to go into my computer's control panel to regional settings, and then to the numbers tab. Unfortunately, my computer has no numbers tab. It only had a general, languages and advanced tab.

Any help would be appreciated.
Thank you.
 

A:converting from metric to us imperial measurement system

Is there a customize button. Under that, there should be measurement system setting.
 

https://forums.techguy.org/threads/converting-from-metric-to-us-imperial-measurement-system.241909/
Relevancy 50.31%

After many months of fine help from people radeon ATI x300? rometotalwar/imperial with glory on tsg forums i have realised that this computer is clunking towards rometotalwar/imperial glory with ATI radeon x300? a halt and have ordered a new one from dell The realisation that the average ipod has x the hard drive of my pc helped but the local company offering broadband for less than my dial up means i am switching rometotalwar/imperial glory with ATI radeon x300? at the end of the month and want a fresh start The new machine will rometotalwar/imperial glory with ATI radeon x300? be a dell dimension P GHz fsb MB cache MB Dual Channel DDR MHz GB rpm Serial ATA Hard Drive with MB DataBurst cache MB PCI Express x ATI Radeon X SE x x x x CDRW DVD-ROM combo drive I mainly use the desktop for work and pootling my current word of the month http www answers com pootle about on the internet I do have a modest interest in games when i have the time though I realise this machine is not for high end gaming however i do not want to run the very latest games with all the graphics maxed out The only thing i am concerned about is the graphics card I couldnt find many reviews googling the model although those i did find were not all together complimentary Adding to the price for a mb nvidia card seemed VERY pricey To get to the point would i be able to play rome total war or imperial glory at a reasonable level with this system or would i need a new gfx card If these are beynd its capabilities would something like battlefield run ok I understand these are relatively new and system draining games I updated my current machine with a mb geforce fx which i believe is in the same sort of budget category Would this give better performance than the radeon x if i slapped it in the new machine i can feel myself breaking out in a cold sweat at the thought of taking a screwdriver to my soon to be arriving spanking new pc My current hodgepodge my word of the month feb http www answers com hodgepodge of components which manages mb ram mhz duron processor and nvidia geforce fx can just about run games like mafia or vietcong with all the gfx throttled back Will the increased ram and better processor compensate for the poor video card sorry this was so rambling but will the x be ok or will it cripple the system as a mid range gaming comp all feedback gratefully received nbsp

https://forums.techguy.org/threads/rometotalwar-imperial-glory-with-ati-radeon-x300.364360/
Relevancy 49.02%

Bonjour,,je me suis récemment acheter l'édition limité du Notebook Star wars et dans les documents de la boîte j'y retrouve le feuillet: About the content included with your HP special edition. Sur celui-ci il est indiqué que je suis sensé retrouvé un icone impérial sur mon bureau hors il n'y en a pas. L'appareil était le dernier en magasin et était donc en présentoir les vendeurs l'ont ''préparer'' avant de me le laisser ensuite. Je voudrais savoir comment retrouver cet icone car après tout j'ai choisi cet appareil pour ses fonctions spéciale. La corbeil n'est pas non plus en forme de Death Star comme elle devrait l'être... Merci beaucoup.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Star-Wars-Command-Center-missing-Imperial-Icon/td-p/5668792
Relevancy 42.57%

Hi all The laptop in question is a Toshiba Satellite A -S A few weeks ago it got dropped right on its adapter? Replace the replace the or jack power corner Replace the power jack or replace the adapter? with the power plug still in it the little metal plug of the AC adapter is now slightly crooked and the power jack has a little chip off the plastic part of it Anyway after this mishap it worked fine for another weeks and then suddenly this week it s refusing to power up Its battery has been shot for a while can t hold a charge and I ve been using it with the battery out Why the sudden refusal to boot I took the whole thing apart---minus the little chip the power jack looks totally fine and cosmetically sound Put the whole thing back together taking care to check that plugs were snug---still no power Stuck in the crappy battery booted just fine and then shut itself down after like minutes How likely is it that it s the power jack which is broken And why did it take this long to crap out if it IS broken A new one of those silly jacks costs over on eBay so I want to make sure that it s the jack before I just up and buy one Of course if it s the AC adapter that s broken that would cost even more Bah Input nbsp

A:Replace the power jack or replace the adapter?

AND/OR inside the case the the jack is soldered directly to the motherboard. Is also possible that
1) It's already cracked
2) If not yet, it's gonna crack

So look to see what connection looks like between power jack and motherboard, If you feel u wanna/can re-solder yourself or the typically price to redo the whole power thing seems to run $125 parts/labor/warranty if you take it somewhere. So how much is it all worth to you?
 

http://www.techspot.com/community/topics/replace-the-power-jack-or-replace-the-adapter.121170/
Relevancy 40.85%

Hello I need Replace in Find Column) different (but Replace & a to Find & Replace (but Replace in a different Column) know if there is a function perhaps a Macro or Query or a more complex Find amp Replace that can accomplish the following cause my database is huge amp I m hoping not to do this manually I keep an Access database for my homeowners association on the condition amp conformity of different exterior attributes for about townhomes The Board of Directors wants to move away from using the term quot Grandfathered quot which is distinguished by the acronym quot GF quot in the database column that shows conformity labeled IAW We use this database to generate annual architectural reports for our residents Our board wants the entry quot GF quot replaced with a quot Y quot they want the GF entry removed from the report completely amp they re serious about it Now I have already created a Query that has located all the GF entries in their various columns of various records which our Board wants me to use in an internal quot in-office quot database in order to keep track of what attributes actually were grandfathered originally as a reference for our field inspector when he inspects the townhomes But we also want to create an unassuming symbol on the report perhaps an or a something that will alert the inspector to an attribute that once was grandfathered on his field report This is to be done so that he will not be flying blind when he comes across a non-conforming attribute i e he will see the symbol amp know that that symbol means there used to be a quot GF quot in it s place BUT we want to move that symbol to a different column a column labeled quot Comments quot I could run the Find amp Replace function find all the GF s amp replace them with a Y but that symbol would go right back in the very same column that the GF came out of So is there a way to find all the GF s in one column amp replace them w a Y in that same column but have a symbol quot quot appear in another column of the same record I know it sounds complicated but can it be done Thanks mark man Access nbsp

A:Find & Replace (but Replace in a different Column)

see attached. But actually getting that data back to the table, if that is what you want, is a bit trickier.
 

https://forums.techguy.org/threads/find-replace-but-replace-in-a-different-column.709333/
Relevancy 40.85%

For some reason W7 has decided to change 'Copy and Replace' with 'Move and Replace' when picking a file up with the left mouse and dragging it to another folder where an old version of the file exists.

My Excel SS is in two places: My desktop and USB which I use for backup. I would simply open the folder on the USB pick up the file on the desktop with the left mouse and drag it to the USB folder. Then I would get the message 'Copy and Replace'.. But not anymore it's become 'Move and Replace'.

I know I can 'Copy and Replace' by holding down the Ctrl key but I dont want to.

It looks like there should be a simple answer

Can anyone help? I swear I didnt change anything.

A:How can I 'Copy and Replace' not 'Move and Replace'.

Hi,
Have you ever tried right click drag and drop ?
There will be a list option after you drop,
Cheers.

http://www.sevenforums.com/general-discussion/334529-how-can-i-copy-replace-not-move-replace.html
Relevancy 39.56%

We have Ecobyte find not replace Need utility and robust Replace - a 2.2 text but Text Like a TON of text based INI files for our companies software deployment scripts We also have a TON of people who use different ways to deploy the same software On one server alone we can have a bunch of different ways people install E G msiexec exe quiet norestart i dfs dfsshare SAV Symant msi msiexec exe quiet norestart i lt qt gt server Need a robust text find and replace utility - Like Ecobyte Replace Text 2.2 but not share WIN Symantec Client Security msi lt qt gt msiexec exe quiet norestart i server share SAV WIN Symantec Client Security msi msiexec exe quiet norestart i lt qt gt dfs dfsshare SAV Symantec Client Security msi lt qt gt and so on down the line I LIKE the abilities of Ecobyte Replace Text but the problem is I have to type in the whole line as it is in the file to then replace it with the new one for the new deployment What I want to do is have a search based on PART of the line so I can then put in Symant msi and Symantec Client Security msi and replace the ENTIRE line with a new line Is there any multi file utility that allows you to search for part of a text line but replace the entire text line nbsp

A:Need a robust text find and replace utility - Like Ecobyte Replace Text 2.2 but not

https://forums.techguy.org/threads/need-a-robust-text-find-and-replace-utility-like-ecobyte-replace-text-2-2-but-not.837870/
Relevancy 37.84%

Ok now its been a while since my pc has not been working Ive had it for just over a year now One day i turned it on and it would get to the Bios splash page but it would not go any further There were no beeps nothing All fans run and from what i remember hard drives would start spinning too I thought maybe it was a replace that replace.. is the To to or question. not PSU problem as the PSU would have very subtle flickering sounds almost like sparking cables However after taking the PSU to a technician they said it was working fine This cost me AUD What he then told me was that it may be the mobo But before i go and send it to a proper technician and fork out X amount of money id like to get your opinion As i mentioned above The pc turns on doesnt boot past the BIOS splash screen and just stays there There are odd noises from the PSU Here is my setup ASUS A N -SLI Deluxe AMD Athlon PC- x gb CAS To replace or not to replace.. that is the question. Corsair DDR mem Radeon X GTO Iceturbo Thermaltake w power supply Maxtor gb Maxline III WD Raptor GB Creative Audigy ZS I have not had the guts to take anything out and test them individually But has anyone had or heard of this problem before What could it be about the motherboard that would also make the PSU make that noise Is it just a safety mechanism of the PSU SOS nbsp

A:To replace or not to replace.. that is the question.

Hi and welcome to Techspot!!

Test the RAM sticks individually. One of them might be bad. You can use Memtest86 to try them out.

Also, try them in different memory slots. That sometimes helps.

Regards :wave:

BTW, Great thread title
 

http://www.techspot.com/community/topics/to-replace-or-not-to-replace-that-is-the-question.75301/
Relevancy 33.97%

I've been looking for the front panel pin layout on the Dell Dual Xeon Motherboard with Dell P/N: 0WN7Y6 (it is a # zero, W, N, #7, Y, #6). 
The front panel connector is 27-pin...28 spots with one pin left blank. The pin layout isn't included in the manual and I'm trying to boot two of these motherboards without the 27-pin connector. I just need to know which pins need to be jumpered in order to test for boot to BIOS.
Any assistance would be greatly appreciated.
 

A:Dell Motherboard- P/N 0WN7Y6 Dual Xeon Motherboard Front Panel Pin Layout

Dell doesn't make the front panel connector pin-outs public. So unless you map them yourself or somebody else has done it...

http://en.community.dell.com/support-forums/desktop/f/3514/t/19996055
Relevancy 33.97%

I am trying to reinstall xp sp Home edition on my older desk top computer as I wanted to upgrade the capacity of hard disk to GB and to eliminate various PC problems My old disk was only GB capacity Here are the specifications for my desk top Desktop is Mesh for which there is no support in the UK it ceased existing a long time ago in UK Mother Board Asus P R -VM Processor unit Intel Pentium chip IXP My old HD which I am replacing is PM - Maxtor Y PO GB capacity My new HD is Quickview Maxtor L PO GB capacity The installation reaches to the stage when it has to write the system files on to the hard disk and it fails The system BIOS recognises P4R800-VM Controller for Driver XP Re-installation Storage motherboard Mass Asus for motherboard the new disk as it is showing it as L PO in the BIOS I have gone through lots of forums and realise that mass storage device driver is not compatible with the new drive or is missing I have even tried to reinstall the system on to the old hard disk to see what happens but it still fails at the same place I do not have manufacturers disk of drivers for my desk top as it came only with recovery disk and no drivers disk I have found all the drivers chip set vga etc from Asus site but do Mass Storage Controller Driver for Asus motherboard P4R800-VM motherboard for XP Re-installation not know which driver is for mass storage Device there Or should it be from Intel site If so what the name would be Please help to get correct mass storage device driver on a floppy disk as I can only insert the driver in the installation process at RAID drivers insertion point I cannot clon old HD either as the drive is already formatted I was trying to reinstall the system first onto the old drive to correct the errors When that did not work I bought Quickview maxtor drive with higher capacity But still I cannot reinstall on the new drive I have an original XP SP Cd from another PC and I downloaded the installation programme on floppy disks from Microsoft site But even this combination does not install the system In this way the system tells me in the middle of the installation that the system cannot copy the file plugin ocx obviously this particular file is not available on the xp sp CD I have I don t know how to obtain it and from where In the end the system cann not copy the files on the hard drive and fails Sorry for the long post as I wanted to explain where I am at the moment in ths process Would be grateful for any advice in this matter nbsp

A:Mass Storage Controller Driver for Asus motherboard P4R800-VM motherboard for XP Re-installation

Almost a word for word copy & paste from THIS forum post made in 2014
@muckshifter the bus inspector should be along soon
 

http://www.pcreview.co.uk/threads/mass-storage-controller-driver-for-asus-motherboard-p4r800-vm-motherboard-for-xp-re-installation.4069314/
Relevancy 33.97%

Hi (a post after a long time)
I've a F90M motherboard (with intel 915G chipset - i gues chipset doesn't have to do anything with front panel connections, but ... ). It came out of Acer 3700GX PC (i think its a bit old ).
Ok, now i'm trying to put it in a standard larger ATX casing. I've fitted it in and everything works fine except the front panel connections. I cannot identify the front panel connections and could only manage to identify the power switch pins on the motherboard.

I've searched over internet and couldn't find a manual of the motherboard (found manual for the PC on www.nodevice.com but it doesn't tell how to connect front panel)

so can you guys please suggest me the connections for front panel LEDs, Audio and USB.

and i really believe that you TSG guys are up to it

Thanks in advance
 

A:Identify motherboard's front panel connections | PC Acer 3700GX | Motherboard F90M

no replies????

is it such a hard/stupid question??
 

https://forums.techguy.org/threads/identify-motherboards-front-panel-connections-pc-acer-3700gx-motherboard-f90m.840211/
Relevancy 33.97%

I could use some creative customer service here. My M3800 shipped with the known power-on motherboard defect. It was replaced at no charge, which was very nice. However, the replacement (2nd motherboard!) is now having the same intermittent dead / no power problem.
To get the computer running, I have to remove the case (12 screws) and un-plug the internal battery to 're-set' the electrical fault. After I put it back together, the computer starts normally. This is not very convenient, especially when meeting with new clients.
The problem is that I am being told I am outside the 3-month repair warranty. I think this stinks! It's a known issue and I would like someone at Dell to step up make my expensive computer work normally all of he time.
Yes, I have run every diagnostic known to man and the internet.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19986464
Relevancy 33.54%

Okay, so as the topic title implies, for the life of me, I cannot figure out which motherboard model I'm supposed to get for this Dell Inspiron 1300 here. Only info I have is that it has the Centrino sticker on the palm rest of the case, and I also have the service tag, but that doesn't seem to give me much information from what I've found.

I've taken the motherboard out of the thing and looked it over, but no luck, as I don't see the model number on it.

Will someone please tell me how I'm supposed to figure out the motherboard model number so I can get a new one?
 

A:Dell Inspiron 1300: Bad motherboard, but which motherboard do I order?

You can search by the service tag number
 

http://www.techspot.com/community/topics/dell-inspiron-1300-bad-motherboard-but-which-motherboard-do-i-order.135108/
Relevancy 33.54%

hey guys, does anyone if there are any other drivers for this board? i'm looking at this page after selecting 'driver' and 'win7 64 bit'. http://gigabyte.com/products/product-page.aspx?pid=3166&dl=1#dl i only see 'audio', 'chipset' 'LAN' and 'RAID'. on the other boards i've seen, the driver software was much more comprehensive and contained several different pieces of software.

what's the main driver i need to install after installing win7 for the motherboard? just wondering if i'm missing something and need to install something else for the 'main features'? or are there main features found in the BIOS before win7 boots up? how does win7 recognise the board btw? does the board have drivers built in already? how can winxp recognise mboards that have been made very recently?

thanks guys
 

A:Gigabyte motherboard: P55M-UD4 some questions on motherboard software

Those are all the drivers you need, and really all any motherboard needs to work. You also have some Utilities under the drop down menu of "Download Type" but these are optional tweaking and similar utilities not required for proper operation of the system. Any version of Windows will have limited driver support, enough to install and run until the correct drivers are installed, or for a SATA or RAID controller under Windows XP drivers are loaded via the F6 prompt during the initial stages of the XP install to allow it to detect the hard drive. There are no drivers built into the hardware itself.
 

https://forums.techguy.org/threads/gigabyte-motherboard-p55m-ud4-some-questions-on-motherboard-software.937530/
Relevancy 33.54%

Well I Just Bought A Broken Emachines I Thought The Capacitors Where Blown But They Look Fine The Problem Is It Wont Post It Has A Via Chipset Thats Probly The Problem I Dont Want To Get The Emachines Replacement Because It Costs 2 Much The Emachine Is A T2200 If Any Body Could Help Me Find A Great Fit Motherboard That You Can Hook Up The Front Usb Port To The Motherboard That Would Be Great It Has A Amd Processor And I Would Like It To Have Onboard Video It Dosent Matter What Ram It Takes
 

A:Emachines Bad Motherboard Whats A Good Replacement Motherboard

Need a motherboard here too

for the same model that is
 

http://www.techspot.com/community/topics/emachines-bad-motherboard-whats-a-good-replacement-motherboard.29980/
Relevancy 33.11%

I'm trying to be a bit cost effective for college by replacing parts of an old computer in order to get it to run CAD (specifically making it possible to run Solidworks 2016) better, but I am new to modifying computers. I currently have a Dell 15r 5520 with no modifications. I have found a 15R 7520 motherboard on eBay to replace it but it says with no video. Does this mean I would have to buy a separate graphics card? If so, any recommendations? Would I be correct in assuming that it comes with the i7 processor? Also any input on upgrading to a SSD?

http://en.community.dell.com/support-forums/laptop/f/3518/t/19985609
Relevancy 33.11%

I just started running Replacing Solved: motherboard with motherboard? identical a Solved: Replacing motherboard with identical motherboard? home business for PC Repair and Tutoring My first customer has a malfunctioning motherboard I believe She has an old Gateway with Win ME I believe that it is the mother board because nothing works on bootup during the gateway splash screen It says that it has detected the keyboard and mouse but also to consult the user manual if a further problem exists The keyboard and mouse won t work with it anyway It goes on to say that there is no hard drive detected and there is no CD-ROM drive detected I am left with a blank black screen with a flashing cursor at the top left hand corner The whole time that it is booting there is a continuous ticking noise I thought that it might be the hard drive for that but it is fine I suspect a bad capasitor My question is this If I find an identical motherboard will a swap go seemlessly or not I am also inviting any other advice on this The only drive that does work is the A drive but when I put a disk in it I get a message saying to take it out and strike any key Well you can t strike any key if the keyboard doesn t work Plus I can t find the any key Just kidding I m not that dumb I knew it was going to be an adventure getting into this business but didn t know how hard it would be to troubleshoot something that was originally a simple issue When I first looked at her PC the Goback utility wouldn t let her onto her desktop because that clock was set for a time that hadn t yet come to pass The ticking noise was present at that time and her original usb keyboard and mouse wouldn t work with the computer either I opened the computer just to see what she had inside it and I changed out the clock battery thinking that this may have had something to do with it I closed it again and the next thing I knew it wouldn t even boot far enough to get to the GoBack screen that was poping up just before the windows startup I doubt that changing out the clock battery would have caused the motherboard to crash That is why I m hear I guess Anyone want to take a stab at it Many Thanks nbsp

Relevancy 31.82%

Hey guys I just joined this forum because I need a little help with my motherboard I am not that technology savvy so I m sorry for any errors A few days ago my monitor stopped working At first I thought it was my video card so I kept fiddling around with it to see if I could fix it It worked a little so Wondering I if fix fried my motherboard motherboard) fan my how to (and I thought I fixed it Then every once in a while it would freeze I opened it up and switched out the video card but still it had the same problem of freezing That s when I noticed one of Wondering how to fix my motherboard fan (and if I fried my motherboard) the fans on my motherboard wasn t turning on It would rotate once or twice and not start but now it doesn t even rotate I m wondering if I can fix the fan its plugged in correctly and if I have to buy a new motherboard I can t tell what motherboard I have Wondering how to fix my motherboard fan (and if I fried my motherboard) so sorry So in short my motherboard fan is not working Any way Wondering how to fix my motherboard fan (and if I fried my motherboard) to fix or do I need a new motherboard nbsp

A:Wondering how to fix my motherboard fan (and if I fried my motherboard)

I would start by checking your power supply with a good tester tool and multimeter.
 

http://www.techspot.com/community/topics/wondering-how-to-fix-my-motherboard-fan-and-if-i-fried-my-motherboard.170326/
Relevancy 31.82%

I am installing Motherboard Monitor. Wizard wants to know what motherboard I have. Don't know where to find it. Related question, MBM list of supported models does not list mine (Dell Inspiron 6000), however, last MBM update was late 2004, (before i6000) and i 5100 is on the list, so I am assuming i6000 is supported. Where do I find motherboard ID? Thanks for prompt response --> wizard is waiting.

A:Need Motherboard Id To Install Motherboard Monitor

In the BIOS.

http://www.bleepingcomputer.com/forums/t/46160/need-motherboard-id-to-install-motherboard-monitor/
Relevancy 30.53%

Periodically I'll get a "C++ runtime error" message and an App will have to close. The it drops to the desktop. Under administrative tools > Event viewer the message seems to point to ntdll.dll version 5.1.2600.2180 . That file seems to be a protected file. Does anyone know the procedure to repair or replace this file?

A:Replace Dll?

Quote:





Originally Posted by feddup


Periodically I'll get a "C++ runtime error" message and an App will have to close. The it drops to the desktop. Under administrative tools > Event viewer the message seems to point to ntdll.dll version 5.1.2600.2180 . That file seems to be a protected file. Does anyone know the procedure to repair or replace this file?




Hello, take a look at this http://www.dll-files.com/dllindex/dll-files.shtml?ntdll

http://www.techsupportforum.com/forums/f10/replace-dll-41171.html
Relevancy 30.53%

Friends computer Windows XP Home She s been having trouble with it restarting on her a bunch lately but she was always able to at least get to the Desktop before it rebooted without any error message or countdown like the blaster countdown When I was finally able to take a look at the computer it won t even get to the windows loading screen I m thinking the HDD is dead or not able to boot from some reason The drive will not boot Gives a blue error message after the bios POST Bios can check the drive and it fails I tried putting a disc in which I thought was a bootable PartitionMagic disc but it s not booting to it So I ll try using a bootable copy of Partition Magic and see what HDD? I just this replace Should it is before we buy a new drive Any ideas If the drive is not bootable now is it worth trying the PartitionMagic disc I m sure the disc I put in before was just a backupdisc that wasn t bootable and had the program s setupfiles on it Thanks in advance nbsp

Relevancy 30.53%

Hi, I have a question with E-mail.
I was wondering if after the 2 years I've had this computer if I should change from my Yahoo! & Gmail accounts to Windows Mail, if that's possible.
What are the pro's and con's of switching to Windows Mail?

A:Should I Replace...

Hi Rance, I am unsure about Yahoo but you can access Gmail via Windows Mail. To use Windows mail you still need a provider whether it be your internet provider or the likes of Gmail so i dont see any reason to change anything except enabling your provider from within Windows mail. Here is a tutorial on enabling pop gmail within windows mail
Windows Mail - Gmail Help

http://www.vistax64.com/browsers-mail/258536-should-i-replace.html
Relevancy 30.53%

Lately, I have been getting computer crashes where my monitor loses a signal from the computer, the gpu fan goes to 100%, and my computer becomes unresponsive (shutdown keyboard command doesn't work). This happens more and more often, to the point where it crashes before the computer can even post. However, when I open up the computer and jiggle around the connections, sometimes pulling out cords and re-plugging them in, this seems to completely fix the problem, until a couple days pass and the process repeats. I am certain I have a loose connection somewhere, but I'm not sure where. Should I replace the power supply or the motherboard? Or could something else be causing the issue? Thank you for any help!
 

A:What to replace?

I would start with swapping in a known good pw supply. While the case is open, get a bright light and give the mb a VERY close inspection. Look for any capacitors that look like the pics below.
 

https://forums.techguy.org/threads/what-to-replace.1066475/
Relevancy 30.53%

So my GPU has been buzzing a lot lately My graphics card is a MSI Radeon series The cause is the fan and I know because it s happened to me before with an GPU my Help me fan replace older card I need to replace this fan but I don t know what to purchase what would be compatible and what would fit The original fan is the same model as this one I found on ebay except mine doesn t have the yellow cable Mine has the same model number Help me replace my GPU fan and the sticker was exactly identical to that one the only difference being Help me replace my GPU fan it has one red and one black cable minus the yellow one So what size of fan do I need and how can I make sure the holes for the screws are going to be the right distance apart What kind of fan will not begin buzzing after long term use This one says it s a quot sleeve bearing quot and I d like to try and stay away from that if I can Thank you Also I could not for the life of me remove the fan s power cable from the card When the time comes any tips for that nbsp

A:Help me replace my GPU fan

I would remove the fan then see if you can match the size with this or similar from Ebay :- http://www.ebay.com/itm/65mm-DC-12V...491634?hash=item3aafbcd672:g:-rYAAOxyzfNRyFhK

You will have to match the electrical connector as well so check how many pins are in the board socket.
You may have to use some force to disconnect the present fan's power cable from the GPU board.
It is a plug/socket connection isn't it ?
 

https://forums.techguy.org/threads/help-me-replace-my-gpu-fan.1162680/
Relevancy 30.53%

HI iv noticed recently my psu fan does'nt spin on start up, despite the pc starting up normally and working fine.

Sometime i turn off and on then the fan will work also.

Do you think i need to replace my PSU or could it be something else?
 

A:Should I replace my PSU?

What is the make and model? This is not sounding good what you describe. A good working PSU is the backbone of any system.

Give us the rest of your system hardware including make and model of your motherboard, amount of RAM installed, harddrive and video card. This will help us help you if you feel you need it.
 

http://www.techspot.com/community/topics/should-i-replace-my-psu.135404/
Relevancy 30.53%

Have a friend with a 9-month-old Dell Inspiron laptop who's had nothing but problems with Win XP. We've deleted the main partition and reinstalled XP, but problem (inability to maintain a modem connection) persists. It may be just a bad modem, and Dell is sending a new one, but he just doesn't like XP, and asked if it's possible to put Win 98 on the computer. I use Win 98, so am not familiar with XP, but know that XP uses NTFS instead of a FAT, and can't find anything that says whether or not it's possible to reformat the drive for a FAT-based Win 98 system. Is it, and if so, how (i.e., can I just boot to the command prompt, type "format c:", and hit enter)?
 

Relevancy 30.53%

Hi my dad recently acquired a computer from his office and gave it too me to use HP Compaq dx I would love to play games at any What replace? I should graphics level on it but there seems to be some problems I m not What should I replace? sure where the What should I replace? problems arise from as I am a beginner with computers so I m not sure what I ll need to replace here is the dxdiag info so please recommend any changes I need to make in order to play games at a decent level eg mb req with low settings territory ------------------ System Information ------------------ Time of this report Machine name PC Operating System Windows XP Professional Build Service Pack xpsp sp gdr - Language English Regional Setting English System Manufacturer Hewlett-Packard System Model HP Compaq dx Microtower BIOS Phoenix - AwardBIOS v PG Processor Genuine Intel R CPU GHz CPUs Memory MB RAM Page File MB used MB available Windows Dir C WINDOWS DirectX Version DirectX c DX Setup Parameters Not found DxDiag Version bit Unicode ------------ DxDiag Notes ------------ DirectX Files Tab No problems found Display Tab No problems found Sound Tab No problems found Music Tab No problems found Input Tab No problems found Network Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D n a DirectDraw retail DirectInput n a DirectMusic n a DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name Intel R GZ Express Chipset Family Manufacturer Intel Corporation Chip type Intel R GMA DAC type Internal Device Key Enum PCI VEN amp DEV amp SUBSYS amp REV Display Memory MB Current Mode x bit Hz Monitor Plug and Play Monitor Monitor Max Res Driver Name igxprd dll Driver Version English DDI Version or higher Driver Attributes Final Retail Driver Date Size bytes WHQL Logo d Yes WHQL Date Stamp n a VDD n a Mini VDD igxpmp sys Mini VDD Date bytes Device Identifier D B E - A - CF-EC - C A C CB Vendor ID x Device ID x SubSys ID x Revision ID x Revision ID x Video Accel Deinterlace Caps n a Registry OK DDraw Status Enabled D D Status Enabled AGP Status Not Available DDraw Test Result Not run D D Test Result Not run D D Test Result Not run D D Test Result Not run ------------- Sound Devices ------------- Description Realtek HD Audio output Default Sound Playback Yes Default Voice Playback Yes Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS amp REV Manufacturer ID Product ID Type WDM Driver Name RtkHDAud sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Realtek Semiconductor Corp HW Accel Level Full Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src Yes Yes I DL tm Listen Src Yes Yes Sensaura tm ZoomFX tm No Registry OK Sound Test Result Not run --------------------- Sound Capture Devices --------------------- Description Realtek HD Audio Input Default Sound Capture Yes Default Voice Capture Yes Driver Name RtkHDAud sys Driver Version English Driver Attributes Final Retail Date and Size bytes Cap Flags x Format Flags xFFF ----------- DirectMusic ----------- DLS Path C WINDOWS SYSTEM drivers GM DLS DLS Version Acceleration n a Ports Microsoft Synthesizer Software Not Kernel Mode Output DLS Internal Default Port Microsoft MIDI Mapper Emulated Hardware Not Kernel Mode Output No DLS Internal Microsoft GS Wavetable SW Synth Emulated Hardware Not Kernel Mode Output No DLS Internal Registry OK Test Result Not run ------------------- DirectInput Devices ------------------- Device Name Mouse Attached Controller ID n a Vendor Product ID n a FF Driver n a Device Name Keyboard Attached Controller ID n a Vendor Product ID n a FF Driver n a Poll w Interrupt No Registry OK ----------- USB Devices ----------- USB Root Hub Vendor Product ID x x CB Matching Device ID usb root hub Service usbhub Driver usbhub sys bytes Driver usbd sys bytes - Mic... Read more

A:What should I replace?

For what it will cost you to upgrade it to play games, I would just suggest saving for a new computer.

First, you'll need to install a video card. If the model you have is in a micro-tower, it's not likely you'll be able to find a video card to fit.

Second, you would want to upgrade the processor. Even though it's apparently dual-core, it's still extremely slow.

Third, you would want to upgrade to 4GB of RAM.

And then to support it all, you'd likely need a new power supply.

So like I said...your best option would be to clean that up, sell it, and buy a new computer when you get the money.
 

https://forums.techguy.org/threads/what-should-i-replace.1028022/
Relevancy 30.53%

At random, XP will restart on its own. The computer was built less than 2 years ago and I'm not quite sure if it's a software or hardware issue. AMD 2600+, 1.9 ghz, 512mb RAM, windows XP, radeon 9600 graphics card.

I find the computer crashes when it's put under a heavy workload. For instance, I opened Spy Bot S&D to rule out any infections and within 30 seconds of running the application the computer restarted. This occured back to back just moments ago. Other times I am using WORD or browsing. This has been occuring for more than 4 months now.

I've ran a CPU application to max it out and again the computer restarts. It occurs everytime I run the program.

I also monitored my RAM while it performed and only 50% was being utilized.

How do I know it's the CPU and not the Motherboard or HD?

Thanks!
 

A:Do I need to replace my CPU?

Spobot Killed the Computer in the Den with the Fireplace Poker

This isn't "Clue" we're paying, you say?

Spybot uses 100% of the CPU. Your box could be entering thermal cutoff.
Use canned air to clean out the CPU/ heatsink, and just for good measure the rest of the insides as well.
Find out if your board has hardware monitoring and find what the critical zone temperatures are. You may have to install either the board manufacturers monitoring software or a utility like "Speedfan', available here at Techspot.
 

http://www.techspot.com/community/topics/do-i-need-to-replace-my-cpu.96586/
Relevancy 30.53%

I recently had to take Os...... Hdd And Had The To Replace my new computer into the manufactures service office And they had to replace the HDD and install all the OS etc I am as before using Windows XP Pro Media Edition in the past before having the HDD problem I use to be able to Had To Replace The Hdd And Os...... access my on line bank account web page with no problem The web site was in my internet options trusted sites and it would access the banks SSL bit Encryption with no problems Now I come to use my computer after putting the banks web site address into the Trusted sites option when I try to access the bank web site it accesses it Ok but will Not open the web page all it say s in the bottom left hand of the screen is Done I have not as yet made any alterations to the new settings in the internet options As I did in the past could this not being able to access the bank web site be any Thing to do with all the internet options being set at default if so any ideas what needs to be altered with the internet options settings to enable me to access my bank account again I have followed the instructions at the Microsoft web site http Had To Replace The Hdd And Os...... support microsoft com kb but still no luck any one got an Idea what to do next please Thanks Mypenry

A:Had To Replace The Hdd And Os......

What is the URL? Does the bank's webpage require Java?

http://www.bleepingcomputer.com/forums/t/74462/had-to-replace-the-hdd-and-os/
Relevancy 30.53%

Hi I have a Sleekbook and I wanted to change the hard drive to an SSD(128Gb)HP Pavilion Sleekbook 15-b005elProduct Number:C5R40EA#ABZREV:1900-100What is best kit for upgrade ?Thanks











Solved!
View Solution.

A:Replace hdd with SDD

See the following video list for removal and replacement of the hard disk. ( hard drive assembly)http://h20574.www2.hp.com/results.htm?SID=10862166&MEID=9E11075D-744F-4986-ACA1-547A14CA1B03 What you will need is a SATA mobile 2.5" SSD to replace the legacy spinner hard wisk with. I highly recommend that you replace it by cloning the current disk to the new one.  That is the simplest method. See the sticky I created  in this section  of the forum for details on how that is done.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/How-to-upgrade-your-notebook-to-a-SATA-2-5-quot-SSD/td-p/4563352/jump-to/first-unread-message An SSD of 256 GB or higher capacity is recommended as a replacement for the legacy hard disk currently installed. An SSD of 256 GB or higher capacity will allow for use of the Recovery media that you created with the HP Recovery Media Creator utility. See the following links at NewEgg.com to see what will work. You can only use SATA, SATAII and SATAIII interface SSD disks. None of the other interface types are compatible with your notebook's systemboard and BIOS !!! http://www.newegg.com/Internal-SSDs/SubCategory/ID-636?Tid=11693  

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Replace-hdd-with-SDD/td-p/5640368
Relevancy 30.53%

HI , system specs...
40 gig hard drive running XP pro in NTFS
2.4 ghz P4 processor
768 megs of DDR 333 ram
cd R and RW drive
dvd drive.
I am seriously thinking of buying a DVD burner today and am wondering if I should replace one of my optical drives or add it to this . If I add I will have three optical drives and one hard drive .. If I should replace one of the optical drives which one would you suggest and which would you place then as master /slave? Thank you for your suggestions ..
 

Relevancy 30.53%

the fan is very noisy specially when i run graphic rich applications like games or flash files.
can i replace it with a new one that is more quite and more powerful.
 

Relevancy 30.53%

Replace faulty HDD with a new 1TB replacement (same size - same brand).  Always get "Reboot and Select proper boot device or Insert Boot media..." all to no avail.  Doesn't matter if CD/DVD, external or HDD selected, same message.

http://community.acer.com/t5/Aspire-Desktops/Cannot-replace-HDD-on-TC-605/td-p/441321/jump-to/first-unread-message
Relevancy 30.53%

HELLO,I WANT TO REPLACE THE LEFT COOLING FAN FOR PAVILLION G6-1230SJBOUGHT IN ISRAEL.I NEED THE PART DETAILS AND NUMBER.THANK YOU,MOSHE

A:Replace a FAN

Dear Customer,  FAN Part number: Fan (available separately) - 639460-001 Please contact HP worldwide using the below link:http://www8.hp.com/us/en/contact-hp/ww-contact-us.html   Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Replace-a-FAN/td-p/5813557
Relevancy 30.53%

My P died The repair center failed to fix it so they SSD? with P50: old How to new HDD replace are sending me a new machine To avoid weeks delay I am getting a standard model they have in stock This model has GB spinner HDD it comes with Windows Pro preinstalled I need to remove it and replace with M PCIe NVMe TB SSD from my old machine it runs Windows pro and P50: How to replace new HDD with old SSD? has all my documents I have nbsp found manuals and guides how to do it from the mechanical standpoint but I am still not sure about the right sequence and changes to BIOS nbsp What should I do Options nbsp nbsp nbsp nbsp nbsp nbsp A Don't turn on the computer Instead just unscrew HDD insert M PCIe SSD only then turn the computer on nbsp nbsp nbsp nbsp nbsp nbsp B Turn the computer on with HDD first enter BIOS change from which kind of a disk and which slot it boots only then unscrew HDD insert nbsp M PCIe SSD and after that turn it on again nbsp nbsp nbsp nbsp nbsp nbsp C Something else nbsp My guess is that if the machine would come with nbsp M PCIe SSD I could easily replace new with the old one without any hassle but because nbsp it is a different kind of a disk in a different slot I am concerned nbsp I might run into problems

https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P50-How-to-replace-new-HDD-with-old-SSD/td-p/3432665
Relevancy 30.53%

Hi......simple question i have a hp pav 8984 with a cd burner......sometimes when i use the burner the computer turns of for no apparent reason..the i have to wait a few hours before i can switch it back on.....but i've been thinking i dont hear the fan anymore and at the back it gets a bit hot....should i replace the fan???? probably a stupid question....but could be something totally different...
 

A:Do i need to replace the fan????

Which fan?

If its the power supply fan, its essential. If you cook the power supply, the HP only replacements are very expensive, and standard ones usually do not fit.
 

https://forums.techguy.org/threads/do-i-need-to-replace-the-fan.287167/