Windows Support Forum

Recovery Loop issue on Satellite C series

Q: Recovery Loop issue on Satellite C series

Good morning people I do have an issue with my Satellite I am currently not home and do issue on Recovery C Satellite Loop series not know the exact version i have but its a C-Series Laptop I watched NFL on Sunday as usual shut down the Laptop went to bed Monday morning i started the Laptop and it was already Recovery Loop issue on Satellite C series taking ages I could then log in and saw my wallpaper the battery status on the bottom right and the windows logo Start in the left bottom corner Every now and then other logos would show up but disappear shortly after After a few minutes i got the Windows Blue screen saying there was an issue and data is being collected Reboot Toshiba Logo and its saying quot data beeing analyzed quot - quot repair being prepared quot - quot repair started may take up to two hours quot Recovery Loop issue on Satellite C series - blackscreen reboot quot data being analyzed quot and so on Now i had my laptop running for a solid hours and it kept going through this loop It will not start from a CD it will not let me get to BIOS I have taken out the RAM one after another same issue What other steps could i take to save my data or the laptop Thanks all O

https://forum.toshiba.eu/showthread.php?94988-Recovery-Loop-issue-on-Satellite-C-series
Relevancy 100%
Preferred Solution: Recovery Loop issue on Satellite C series

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 76.11%

Hi, im just wondering if there was any way of getting recovery disks if you have already wiped the hdd? I only formatted the c drive, not the recovery partitions.
I didn't make a recovery disk because I have made a image using a 3rd party image backup program. But when I put the disk in, it doesn't work.
I tried doing a system reset by pushing f12, but not even that works, I get an error message.

https://forum.toshiba.eu/showthread.php?86716-Recovery-disk-for-Satellite-S-series
Relevancy 73.53%

Hello, prompt RV microphone microphone records the noise only changed the microphone. The device with support for high definition audio is not available at the moment

https://forum.toshiba.eu/showthread.php?91317-Microphone-issue-on-Satellite-A-series
Relevancy 71.81%

I installed Flux when the issue firt started, since then I've uninstalled flux and performed a system recovery to be double certain the laptop software was restored to its pre-problem state.

No luck,so I wanted a diagnosis from you guys, so I can figure out if its something I can fix myself, or if I should hire somebody to do it.

The laptop is only 3 months old, so still under warranty but as I don't have the receipt I don't know if I can claim against the warranty.

http://i.imgur.com/quQxSHk.jpg - tried uploading through the forum but it didn't work

A:Discoloured screen on Satellite C series - GPU cable issue?

can you reset the colors in the Intel graphics utility? (Or AMD utility depending on which model notebook you have)

https://forum.toshiba.eu/showthread.php?91108-Discoloured-screen-on-Satellite-C-series-GPU-cable-issue
Relevancy 71.81%

Hello Toshiba System Satellite Recovery Loop Boot I am a new user and found this website to ask for help Here is my problem My brother's Toshiba Satellite A caught a Toshiba Satellite System Recovery Boot Loop virus He uses Windows XP SP The system starts up fine but when I get to the desktop it loads horribly slow due to the virus CPU usage remains at So I turn it off and back on while pressing F I have the option of booting from cd hdd fdd and I forgot the other one I do have a recovery disk I put in So I Toshiba Satellite System Recovery Boot Loop highlight the cd option so it boots from the CD It begins saying quot Loading RAMDISK image quot then loads another thing then just starts back up as normal into the desktop once Toshiba Satellite System Recovery Boot Loop again Second try I go into BIOS and change it so it boots only from the CD when it starts up And again I get quot Loading Ramdisk image quot and the other thing that loads I forgot what it said when it's both done loading it starts back up all over with quot loading ramdisk image quot It just endlessly loops Getting no where I also tried going into safe mode for a system restore to a certain point Mind you the system restore window took about hour to pop up The laptop is I that I slow I left it for about hours to do its system restore to a previous date and it didn't fix anything at all Another try I waited for the whole system to load I put in the CD and waited for the Toshiba System Recovery to pop Took about another hour for it to pop up With patience it popped up and I pressed quot Preform a system recovery quot It leads me to another window asking me to confirm if it is alright that everything will be deleted I press CONFIRM It shuts down and goes back to quot Loading ramdisk image quot and loops all over again I am stuck I don't know what to do anymore I have used this CD in the past to do a system recovery and it worked flawlessly But now it just doesn't want to work anymore I have tried pressing every F button I tried pressing quot quot on power up and tapping once toshiba logo appeared I tried pressing quot C quot none of them did anything for me if this helps the CD says TOSHIBA Recovery and Applications Drivers DVD Satellite A A Series

A:Toshiba Satellite System Recovery Boot Loop

Hi troubled.user,

Try going to safe mode again and see if you are able to get internet access while in safe mode. Assuming you do, try downloading two programs called "HitmanPRO" and "Malwarebytes". Install them both and then first run HitmanPRO then Malwarebytes. Let both programs run and detect any viruses/spywares on your computer and delete them. Hopefully this helps you out.

http://www.techsupportforum.com/forums/f10/toshiba-satellite-system-recovery-boot-loop-561280.html
Relevancy 70.95%

hello dears ...
i just bought a new laptop which is toshiba L series with embaded AMD R7 M260 Graphis card 2 GB
and i dawnload the driver from AMD site and install ...but cant even open AMD redion settings
i also tried to clean all drivers and install again and again still not working
so please anyone who can help me ....

https://forum.toshiba.eu/showthread.php?92655-Toshiba-Satellite-L-series-AMD-R7-M260-graphic-driver-issue
Relevancy 64.93%

Still Having problem with a satellite C - KN I have the recovery discs but thought I would try and recover from the hard drive This is what happens Start up with F pressed until See Toshiba display Get to boot menu go to HDD recovery choose language go to Troubleshoot Choose option quot refresh PC press next choose to start Satellite Recovery HDD issue - C850-1KN in Win and get message quot drive where windows is stored i s locked Unlock drive and try again quot Any ideas how to unlock the drive as the Satellite C850-1KN - HDD Recovery issue computer will not start up unless I use F If I use option quot toshiba maintenance utility quot and win as target operating system I get an invitation to choose either delete all dat and partitions from the hard disc or delete all partitions and overwrite all sectors on hard disc What will these do to my computer would I end up with a useless piece of junk or will the operating systems still be there There are other options such as quot reset your PC quot when all personal files and applications will be removed and PC settings will be reset to their defaults What will be left on the computer I have not tried from revery discs yet and wonder if this is the best option Can anyone help please I repeat I am certainly no expert or anywhere near

https://forum.toshiba.eu/showthread.php?88473-Satellite-C850-1KN-HDD-Recovery-issue
Relevancy 64.93%

Hey guys!!

I really need your help. I wanna get my laptop back as new. Done it a few times before thru HDD RECOVERY, but I cant anymore as the HDD RECOVERY entry is missing. However, I found in here a thread where it says to use a USB stick with toshiba HDD RECOVERY folder (which is on my laptop in a separate drive), but then when I boot the laptop thru USB it says BOOTMGR IS MISSING press CRT ALT DEL.
Any ideas please?!

https://forum.toshiba.eu/showthread.php?92205-Satellite-P300-recovery-issue
Relevancy 63.64%

Hi I'm having trouble fixing a Satellite C -A Laptop which was running Windows The main issue is a 'no bootable disk' bootable issue Toshiba C50-A 'no - disk'. USB Recovery Satellite error message The secondary issue which is Toshiba USB Recovery issue - Satellite C50-A 'no bootable disk'. stopping me solving the first issue is difficulty using the Toshiba USB recovery disk Any suggestions or advice on either of these problems would be much appreciated Troubleshooting this PC so far The laptop has only had months of light use I have no idea what caused the initial issue but it's now giving a 'no bootable disk' error message I'm not at all clear on how these recovery partitions are supposed to work And I'm not familiar with UEFI Secure Boot etc Does this error message mean that the boot partition and the recovery partition both became corrupted simultaneously Or are there some main boot files which might have become corrupt I used a Linux live CD to access the drive read-only and managed to recover data This would suggest to me that CD CPU and RAM are all working okay and the disk is still accessible I'm not sure if this is a correct assumption It looks as if Windows has got itself mangled during some quick hibernate process but I'm not competent enough to troubleshot a Toshiba partition Windows corruption issue from Linux So I reset the BIOS after using the Linux CD and purchased a Toshiba USB Recovery stick Ideally I'd like to just repair Windows if that is all that is broken and leave everything else as it was As a second choice a complete fresh install back to factory settings would be fine However I am having severe problems using the USB stick I have tried all USB ports and I am having the same problem on all of them It is taking hours and hours to load this recovery system It does appear to be working but in geological time I have to leave the PC for about hours after every mouse click before the next action is possible By this I mean it is hours of the little circle before anything happens Then hours again before a mouse cursor appears And hours again before a menu appears then hours again before I click which keyboard language and so on I have recovered netbooks from USB and laptops from CD before but this is a far slower response than I have ever seen before At this rate a normal install would take several weeks I'm not at all clear as to what is going on here I'm not sure if there is simply a fault with the USB stick from Toshiba or if this is indicating that there is a major underlying hardware fault with this PC I would have much preferred to get the recovery files on CD but this was not an option Is it possible to transfer the install files from USB stick to CD using another PC Apologies for asking multiple questions in the same post but I am not clear which question is most relevant to getting the machine functioning again Thanks

https://forum.toshiba.eu/showthread.php?85404-Toshiba-USB-Recovery-issue-Satellite-C50-A-no-bootable-disk
Relevancy 55.47%

After some intense computer usage for example L Fan Satellite - series problem gaming laptop gets hot Of course it'snot a problem Problem is that fan starts spinning faster and then suddenly stops after a while fan gets again and again CPU gets throttled at the same time laptop cleaned thermal paste replaced Tested on different BIOS versions unlocked unlocked Tested on Windows With installed toshiba programs sometimes message telling me that the cooling system had been damaged appears and fan lock on and the problem is gone then I can provide any additional information This problem doesnt occur - years ago while playing same games or running same programs I think BIOS since is broken Could somebody provide older versions of BIOS Same problem in other threads https forum toshiba eu showthread php -Satellite-L - H-Fan-issue-notification https forum toshiba eu showthread PU-temperature https forum toshiba eu showthread s-while-gaming https forum toshiba eu showthread emp- -on-idle https forum toshiba eu showthread hen-CPU-at- C https forum toshiba eu showthread -start-to-work https forum toshiba eu showthread php

https://forum.toshiba.eu/showthread.php?93725-Satellite-L-series-Fan-problem
Relevancy 55.47%

Hi there,

My Function Key seems to be on all the time. I have had some problems with it in the past,
but I could easily fix it by going to System setting > Keyboard > turn the standard F1-F12 mode back on.
Only the last few weeks, that solution doesn't work anymore. I recently updated to Windows 10 and I was hoping that the update would fix the problem, but it didn't. I tried all the other options like pressing the Fn key for 10seconds and stuff like that, but all my efforts were in vain.
So are there other solutions to this problem? Did you experience the same and how did you fix it?

I really appreciate any help you can provide,
Yenian.

P.s.
English is not my mother tongue; please excuse any errors on my part.

https://forum.toshiba.eu/showthread.php?91945-Satellite-P-series-Fn-key-problems
Relevancy 55.47%

Can I upgrade the original SSD (128GB) to 256 GB??
Can i screw open the back cover??
Who has experienced this?
Thx,
erik O,

A:Can I Upgrade the SSD on my Satellite Z series ?

Since the SSD is not user accessible you may void the warranty if you open the notebook.

The SSD can be upgraded but you need a 1.8" mSATA SSD. A standard 2.5" SATA SSD won't fit.

https://forum.toshiba.eu/showthread.php?68231-Can-I-Upgrade-the-SSD-on-my-Satellite-Z-series
Relevancy 55.47%

When I press F2 on start up my laptop boots up as normal. I can not get into settings, I need to boot up on Hirens usb ?

https://forum.toshiba.eu/showthread.php?92889-Satellite-C-series-can-not-get-into-set-up-(boot)
Relevancy 54.61%

I cannot believe this is not searchable on this site given it has plenty of mentions on the net.... I certainly cannot find an answer here already so sorry for asking again.

Old Pro M-series had to put new hard drive in, however whilst I can start the Toshiba disks (odd that its XP capable but disks are for 98?) or I can run installation of XP and format the disk when it reboots after first files installed or boots not with an installation disk I get

0201: Failure IDE #0

What do I need to do to the disk to get the laptop to boot from it, odd how it can be seen by the setup program and files written to it.

Thanks.

A:0201: Failure IDE #0 - Satellite Pro M Series

Hi

There are two IDE controllers:
IDE 0 -> HDD
IDE 1 -> ODD (optical disk drive)

It looks like something is wrong with the device connected to IDE 0?means HDD.

If possible try to boot the unit using an Ultimate Boot CD to test the HDD, or run Chkdsk c: /r from the recovery console to attempt to recover any bad sectors.
You can also try to boot once again from Win XP disk which contains the Repair option (while setup have to press R to get repair console)

https://forum.toshiba.eu/showthread.php?69247-0201-Failure-IDE-0-Satellite-Pro-M-Series
Relevancy 54.61%

Can anyone please tell me why the touchpad has suddenly stopped working. I have done FN F5, it is enabled. Thanks in advance.

https://forum.toshiba.eu/showthread.php?94929-Touchpad-not-working-on-Satellite-L-series
Relevancy 54.61%

This evening I bumped my computer screen as I rested it down (not too hard, but it slightly slipped from my grip).

The laptop appears to be functioning okay other than an issue with the screen. About 3 quarters of the screen is not working, it is just white background, with colourful streaks, and a large diagonal black line.

Is this likely to be simply a broken screen, that could be solved by replacing the screen itself? I am waiting to order a new screen but I don't want to spend the money if the problem is likely to be something else..

Also I've been told it's relatively easy to replace the screen yourself. I've done minor repairs on laptops/pc's in the past (new keyboard/track pad). I don't have warranty/insurance and can't afford a pro. Is it something I should be able to do myself?

https://forum.toshiba.eu/showthread.php?93020-Satellite-C-series-screen-broken
Relevancy 54.61%

the fan always run even in IDLE when lan power is on
thanks for all help, who can stop fan.....

A:Satellite Pro L series: Fan always run even in IDLE when LAN power is on

Just view questions:
What notebook model do you have exactly?
What system are you using?
What do you mean by LAN power exactly?

I can just tell you that the cooling modules are controlled by fan table stored in the BIOS.
Usually the cooling fan starts to rotate if the CPU would be loaded by some single applications/processes. It could be also possible that your fan rotates continuously with low performance in order to keep the temperature low. This isn?t a real notebook problem.

https://forum.toshiba.eu/showthread.php?72314-Satellite-Pro-L-series-Fan-always-run-even-in-IDLE-when-LAN-power-is-on
Relevancy 54.61%

Hello

is it possible to upgrade/mount a m2 SSD 2280 Modul in the new Skylake Generation Notebooks
Satellite L70-C-14N or Satellite L70-C-14M?

https://forum.toshiba.eu/showthread.php?91026-Usage-of-M2-SSD-module-in-Satellite-L70-C-series
Relevancy 54.61%

Hello Everybody:
We are trying to download the OS Version on Satellite C (W8 to W7).
How can we Access the BIOS?
We are pulsing the F3 key during loading process but this way dont run.
Thanks a lot

https://forum.toshiba.eu/showthread.php?91791-How-to-access-the-BIOS-on-Satellite-C-series
Relevancy 54.61%

My satellite M series laptop will turn on but then won't startup. The screen won't turn on not even the cd drive will open. Can somebody please help me out?
 

A:Satellite M Series will turn on but won't startup!!!

Are there any power lights at all? If so, can you hear the hard drive spinning?
If the CD drive will not open, open it by inserting a fine probe into the little hole on the fascia: insert your system recovery CD and reboot. If it boots you maybe have a hard drive failure, if nothing then the most likely problem is the power controller.
 

http://www.techspot.com/community/topics/satellite-m-series-will-turn-on-but-wont-startup.84436/
Relevancy 54.61%

Which Model or series if the S70t-a or b models is the CPU soldered to the motherboard? Or is the CPU soldered to the motherboard on the touhscren models only?

https://forum.toshiba.eu/showthread.php?93156-Which-Satellite-S70-series-got-CPU-soldered-to-motherboard
Relevancy 54.61%

After having reinstalled Windows 10, nothing happens when I press the Num Lock key and a number key. It should be a simple solution to this problem, but I do not get any help from Microsoft or Toshiba. Does anyone have an idea?

https://forum.toshiba.eu/showthread.php?94981-Num-Lock-key-is-not-working-of-Satellite-L-series
Relevancy 54.61%

Hi there,

Im not sure what series satellite I have but my cursor just basically does what it wants when it wants & it's doing my head in seriously.

Thank you in advance, appreciate any help with this issue

Regards,

Blesd01

https://forum.toshiba.eu/showthread.php?91968-Cursor-keeps-jumping-using-Satellite-A-series
Relevancy 54.61%

This morning i was going to sell my laptop as I am buying a new one but there is no rush.

However, I have been told that I need to remove the initial password. Which I had been told is "BIOS password". To confuse everything, I have also been told it is not a BIOS password. #confused

However, regardless of trying to contact Toshiba non of the U.K. Numbers are working and the email no reply. I had followed the guidance from that website on Toshiba and tried numerous of time all day.

I want this first password removed that comes up, when I switch on my laptop.

I did not put this on my computer it happened with the upgrade. I know the password but I did not install this or remember setting this password.

Can someone contact me please and help solve this matter.

Thank you

https://forum.toshiba.eu/showthread.php?93744-Need-to-get-BIOS-password-for-Satellite-Pro-A-series
Relevancy 54.61%
Relevancy 54.61%

Hello Suddenly without any update or a new program installation my laptop start BSOD BSOD iaStor sys amp iaStorA sys and restart Both on safe mode and normal mode I try the last known good configuration but nothing I tryed also system restore to an other restore point some days before the problem but nothing I searched with a lot of programs for virus malware rootkit but nothing It is clean I tryed to unistall install rapid storage technology driver intel but nothing I uncheck it from msconfig - gt services menu but nothing I unistall antivirus I went to bios and i load the default settings I uncheck everything from msconfig - gt startup Finally i made iaStor.sys my BSOD series new Satellite on U system restore to factory default settings but when i go to the last menu i had the same BSOD Please help I don't know what else to try Any idea The laptop is new I have it only two months It too young to go to toshiba service http imagizer imageshack us v xq xijw jpg http imagizer imageshack us v xq ec jpg

A:iaStor.sys BSOD on my new Satellite U series

As I can see you have tried all to check what is wrong and tried to fix it. all but last step is definitely recovery image installation but if even this doesn?t help there is nothing you can do about it.

I know it is very frustrating that only two months old notebook must be send to repair but I?m afraid that is your only option at the moment.
Visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/ and there you will find addresses and phone numbers for ASP in your country.

Contact ASP as soon as possible and ask for help.

https://forum.toshiba.eu/showthread.php?76227-iaStor-sys-BSOD-on-my-new-Satellite-U-series
Relevancy 54.61%

I turn on my laptop, it boots completely up to icon screen last 20 seconds on then laptop turns off, what can it be ?

A:toshiba satellite 300 series on/off problem

You may have an application or service running at startup that is causing this issue. Try troubleshooting by running a clean startup (aka clean boot.)

Troubleshoot Application Conflicts by Performing a Clean Startup

http://www.sevenforums.com/general-discussion/229627-toshiba-satellite-300-series-off-problem.html
Relevancy 54.61%

I recently bought a toshiba satellite s-series and the usb ports are not working - usb xhci compliant host controller code 39
things I have tried:

- searching the internet for any related issues
- searching the support site for drivers but they don't provide usb drivers for my laptop.
- updating and uninstalling the driver.
- "add legacy hardware" via device manager

any help is greatly appreciated

Message was edited by: raafen

A:Re: USB ports on my Satellite S series are not working

If you need some help you must post exact notebook model name and OS you use.

https://forum.toshiba.eu/showthread.php?80671-Re-USB-ports-on-my-Satellite-S-series-are-not-working
Relevancy 54.18%

Does anyone know which battery the P300 comes with as standard as it only has a 2.6 hour battery life?
The battery offered in the accessories list is a 9 cell 6000mAH one, and I need to know if this is higher capacity or the same.

A:Re: What battery was delievered with Satellite P300 series

What P300-xxx do you have exactly?

>... it only has a 2.6 hour battery life
Please apologize this comment but 2.6hours are to short for you?
My small u400 runs only 2hours on battery power using just only IE for internet browsing.

However, the battery working time depends on the notebook usage.
You can extend the battery working time decreasing the display brightness and disabling some other devices like HDD or cooling modules.

These settings can be done in Vista Power settings.
Check this Toshiba article
http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm

Cheers

https://forum.toshiba.eu/showthread.php?43472-Re-What-battery-was-delievered-with-Satellite-P300-series
Relevancy 54.18%

Hi All

New to this forum I purchased an old Toshiba Satellite Pro 4300 series laptop recently as a starter machine for my son. The machine is currently connecting to the internet using 3Com Megahertz 10/100 LAN PC Card PCMCIA 3CCFE574BT with dongle connected via speedtouch hub.

Can anyone tell me if there is a wireless PC card that I can use with this machine without having to plug any wires into the hub.

Cheers

A:Satellite Pro 4300 series - Is there a wireless card available

Hi

As far as I know the machine does not support Wlan and has not been equipped with any Wlan cards.
If you want to connect the machine to the WLan router then I would recommend using an USB Wlan stick which would be the easiest solution.

There are different USB Wlan sticks which supports different Wlan standards; 802.11 A B or G? you should choose one which is compatible with your WLan router.

Cheers

https://forum.toshiba.eu/showthread.php?44630-Satellite-Pro-4300-series-Is-there-a-wireless-card-available
Relevancy 54.18%

Hello,

I just would like to know if Toshiba doesn't made the Satellite T110 any more? Because here in spain I don't find it anywhere to buy it.
If it's true that Toshiba don't made it anymore, is there an other toshiba notebook with a size screen between 11" and 12" ? Is just the size that I want.

Thanyou,

Kind regards.

A:Satellite T110 Series offer in Spain

Hello Nicolas

T series is pretty old and I can imagine this model will not be offered anymore. If you check Toshiba Europa page or Toshiba Spain page you will see that Toshiba offers second generation of T series. This new model looks much better as old T notebook.

T series notebooks were reworked and now Toshiba offers them in new look, modern design and, I believe, with Win7 as operating system.

Visit Toshiba pages and check these new models.

https://forum.toshiba.eu/showthread.php?59493-Satellite-T110-Series-offer-in-Spain
Relevancy 54.18%

I have been looking for manual for the Toshiba Satellite Pro 4200 Series for long time, spent many hours looking for it, I need the one which tells how to disassemble the laptop. If anyone came across it somewhere, please, please, let me know.

Thanks in advance. Cheersss~~~~!
 

https://forums.techguy.org/threads/toshiba-satellite-pro-4200-series-problem.253132/
Relevancy 54.18%

I've had my Toshiba Sat 1900 laptop for about 1 years now and I'm starting to get a few problems with it. I find that the computer is running slow, the monitor is acting weird when I scroll up and down I'm getting a wigly/wavy look from the screen (pixel problem?) and it just doesn't work as good as it did.

I've been told laptops don't last as long as a desktop pc. Is this true?

What should I do about my laptop with these problems? thanks.
 

A:Toshiba Satellite 1900 series Notebook

Have you ever used any utilities to clean out garbage from:

Registry

Temp Files

Internet files/Cookies

Viruses

Spyware

Defrags

etc, etc, etc

How much free space is available on your HD?
 

https://forums.techguy.org/threads/toshiba-satellite-1900-series-notebook.318854/
Relevancy 54.18%

Hello,
i want to disable the iGPU (NVidia) completly and just use the AMD GPU only. Because i have problems with some games and things like that.
But i dont found the option in the Tohsiba BIOS or UEFI.

Please help me.

best regards
Matthias

https://forum.toshiba.eu/showthread.php?93460-How-can-i-disable-the-iGPU-(Nvidia)-on-Satellite-P-series
Relevancy 54.18%

Hi and Hello to all,

I am tring to reinstall Windows 7 but mouse pointer
just keeps "flashing around in top left hand corner"

As its a new instalation can`t go into setings etc

Tried connecting a external monitor but cannot get
laptop to show on i (dont now if there is any other
thing to press other thn just the top key ie FN key
or CNTL key first)

The screen in cracked and dont know if this might
have something to do with it thats why I`m trying to
use external monitor

Any help would be most appreciated

neil

A:Dancing touchpad / mouse of Satellite C series

hi, power down the laptop, remove the power cabel, remove the battery, press the power button for 1 minute, plug in the power cabel, push the power button and the FN+F5 key combination. If don't work try the FN+ FX FX =F key with laptop/monitor key. Wait 10-15 seconds after you press the keycombination.

https://forum.toshiba.eu/showthread.php?93356-Dancing-touchpad-mouse-of-Satellite-C-series
Relevancy 54.18%

I have a feeling that my bios has been wiped. While on-line performing a download my screen began flickering and the laptop shutdown. I now have power in the laptop but absolutely nothing on the screen. I have tried holding 'o' at powering up and and also f2 to get to bios aswell as FN f5 to try another monitor all to no avail, which has drawn me to the conclusion of an infected bios. Is there any way I can replace bios without going to a store. Bear in mind I have absolutely no visuals on the laptop. Any suggestions greatly appreciated...

A:BIOS update / installation for Satellite C series

Sounds like the LCD has detached from the mainboard. If you connect an external monitor can you see the image?

if not, send the notebook to a Toshiba Service Center for repair.

https://forum.toshiba.eu/showthread.php?91010-BIOS-update-installation-for-Satellite-C-series
Relevancy 54.18%

I can't find my last post regarding this, so apologies if this is a double up...
 
Other than disliking the OS 8.1 with its  OVERLY ANNOYING start screen/"charms" appearing whenever THEY wish, this appears to be a great little Laptop!
 
Reasonable specs for my needs, not unlike my 'Vista girl', but with a 750Gb hdd....
 
but.......... other than the A/C and WiFi lights at the front right, I don't see any others?
 
CPU activity in particular... so how do I know when it's running/struggling/etc???

A:CPU activity light on Toshiba Satellite C50-B series....?????

Hi OliviaITlover Depending on the laptop/computer brand and model you have, you won't have the same lights as others. Some offers light for the A/C, network (WiFi), network (Ethernet), disk usage, etc. while others only offers light for the A/C. Personally, I've never seen a light for the CPU usage. If you want to know your CPU usage (and if it's struggling), right-click on the taskbar and select Open Task Manager. From there, you'll see your CPU usage and if it's struggling or not.

http://www.bleepingcomputer.com/forums/t/581254/cpu-activity-light-on-toshiba-satellite-c50-b-series/
Relevancy 54.18%

Hello everyone My little more than one year old Satellite notebook won t turn on when I press the power button The lights next to the button work but the computer itself doesn t turn on no HDD no CPU I took it to a service and today I called them - they re telling me that the video card overheated and I didn t A Satellite Doesn't Turn Series On Toshiba really understand what I got out of it was that the soldered pins got detached and that s what s causing the problem They said they can solder it back for I Toshiba Satellite A Series Doesn't Turn On m a little skeptical because I know that I can boot a desktop computer without a video card at least to hear the HDD and the CPU Can it be possible that my computer doesn t boot because my video card is detached from the motherboard I m also a little skeptical because I think what they re trying to do is rip me off that s why I m asking if this is reasonable They charge me bucks either way now that they opened my computer and quot checked quot what was wrong and they walk away with even more money if they get me to agree to repair it My fear is that possibly they even fiddled with my video card now let s say that the problem was a simple wire and they ruin the soldering on my video card just to get me to pay bucks for the computer back If I choose to not repair this computer they ll probably offer to buy it off of me for about the same price if not lower and it s still a very good laptop Thank you for any help in advance nbsp

Relevancy 54.18%

Hi everyone,

I have a p50-a01d that has the standard multi drive so i cant play blu ray discs.

Wanting to know what new toshiba laptops have a blu ray drive from factory.

Thanks

Mick

https://forum.toshiba.eu/showthread.php?90014-What-Toshiba-Satellite-P-or-another-series-support-BD-drive
Relevancy 54.18%

I've been looking for some information about my computer (which is Toshiba Satellite T135D-S1328RD) but I can't find it anywhere. I've been at the help panel, trying to type it in, but an error occurs.

Tracking my computer series doesn't work neither. T135D- there is no such option in choosing your computer from the list.
So I ask: where can I find it?

Some parameters are on the Internet, of course (for example here: [http://www.cnet.com/laptops/toshiba-satellite-t135d-s1328rd/4505-3121_7-34025428.html]), but I wish I could get some professional help acording my computer on Toshiba's page.

I may add that my computer is from Japan, but the same - no info about it can be found on Japanese page.
What is wrong with that series?

A:Satellite T135D-S1328RD - do such series exist?

>I've been looking for some information about my computer?
What kind of information do you search?
>What is wrong with that series?
I?m a bit confused now. How to understand this question?
Obviously this notebook model is designed for Japanese market only so you will not find it on any other Toshiba support page.


Other way, install Windows on your native language, configure it and have fun with it. Where is the problem?

https://forum.toshiba.eu/showthread.php?69726-Satellite-T135D-S1328RD-do-such-series-exist
Relevancy 54.18%

Hi there.

Only the 2nd function keys work on my keyboard. As in 'P' when typed produces an '*' does anyone know how to turn the fn off?

Thanks in advance!

https://forum.toshiba.eu/showthread.php?88843-Only-2nd-function-keys-work-on-my-Satellite-Z-series
Relevancy 54.18%

I bought a Toshiba Europe GMBH in Aug 14 approx 6mts ago a message came up stating problems with hard disk and a sort of clicking noise .However it only occurred now and again .Due to pressures of life I didnt sort, It has started to show the message daily now and the noise is recurred . I took back to Argos yesterday and as not in warranty they advise I contact Toshiba . I am new to this can someone give me an email address or phone number and if possible advice .Many thanks

https://forum.toshiba.eu/showthread.php?88559-Satellite-A-series-Windows-detected-HDD-problem
Relevancy 54.18%

Hi out there!

Just wanted to inform you about an enoying but reproduceable BUG:

Toshiba Satellite Pro R50-B Series:

You have to disable the Intel-Management-Interface in Device-Manager otherwise the Notebook won't shutdown completely / Standbymode wont work.

Issue (Bios V1.4 - Intel ME 11.00.1166):

Work longer than 30min. Then try to shut-down. Screen goes blank - but LEDs on the front stay on, fan stays on until battery is completely empty. Or try to go to standby-mode. Same as shutdown.

Just disable Intel ME in Windows Device-Manager an you fine.

Waiting for any news from Toshiba - i m a reseller, so the same problem exists on >10 notebooks here.

Regards, Bernhard

A:Satellite Pro R50-B Series Windows 10 Shutdown Problems

Hi, I have the exact same problem with my Satellite Pro R50 and Windows 10.
Just installed updated Win10 drivers from Toshiba, but no solution.
Please help!
Regards, Oliver

EDIT: SOLUTION

https://forum.toshiba.eu/showthread.php?81944

https://forum.toshiba.eu/showthread.php?86329-Satellite-Pro-R50-B-Series-Windows-10-Shutdown-Problems
Relevancy 54.18%

i installed win 10 in a 2nd partition
want to activate
searched for key in registry
found key
not working
looked under laptop
unreadable

any ideas ?
i mn greece so i dont think that service is authorized . They told me to contact HQ

https://forum.toshiba.eu/showthread.php?92217-Unreadable-Windows-product-key-on-my-Satellite-L-series
Relevancy 53.75%

Hello, I've used the recovery media creator to create a USB flash drive recovery media.

If i then use that to restore the Windows 7 installation onto a new hard drive (as SSD) will that drive itself have the recovery media partition on it?

So if I then lose the USB stick could I restore again by holding down zero when powering on?

Or does it recover the Windows partition and nothing more?

Thank you

https://forum.toshiba.eu/showthread.php?91105-Satellite-C650-14U-Does-recovery-media-create-recovery-partition
Relevancy 53.75%

My laptop started having trouble with the letter h, it does not work.
Is this easy to fix or do I have to take it in somewhere to be repaired.

I have tried dusting it out.
 

https://forums.techguy.org/threads/solved-toshiba-laptop-satellite-1415-series.486652/
Relevancy 53.75%

Hello,
This 10% alert battery level is no longer working since 2 days.
I am using W10 versus 1511. Last update KB 3133431.
Any idea to restore this useful alert?
Thanks.

https://forum.toshiba.eu/showthread.php?89388-Satellite-A-series-battery-10-alert-level-since-2-days
Relevancy 53.75%

I've just switched on my computer and it has came up with a black screen with a series of code

A:Satellite C50D - black screen with series of code

series of code ?
what is the text you see?
If you google the code you can find the solution.

https://forum.toshiba.eu/showthread.php?91032-Satellite-C50D-black-screen-with-series-of-code
Relevancy 53.75%

Hello everybody,

I have two profiles in my laptop. One usual and one professional. In my professional (which is the one I used the most) every time I log in and I try to access program clicking on the start button (or press the key with the windows symbol) I get a CRITICAL ERROR message and tells me it will be repaired the next time I log in. Which hasn't happened. Also my usual PDF has changed and i can't read any f my documents!
Can somebody please help?
Thank you

https://forum.toshiba.eu/showthread.php?90742-Start-button-CRITICAL-ERROR-on-Satellite-A-series
Relevancy 53.75%

My laptop started having trouble with the letter h, it does not work.
Is this easy to fix or do I have to take it in somewhere to be repaired.

I have tried dusting it out.
 

https://forums.techguy.org/threads/toshiba-laptop-satellite-1415-series-key-stuck.486657/
Relevancy 53.75%

Following instructions I opened and cleaned the interior electronics after it developed overheating problems that would result in it powering down. Following reassembly the computer will eventually restart but only after failing bootup at leastg two times. At initial startup or boot from hibernation the computer does not appear to reach boot source but emits a series of beeps, first 1 beep, then 3 beeps, another three beeps, and finally 1 beep. These are all about 1 second long and seperated by 1 second. Pressing and holding the start button again sometimes resuls in a full repeat of the above or the computer emits the series of 1single beats, 4 beats, one second long and one second seperation. Eventually pressing and holding he power button will evenually result in hearing the computer attempt to boot from the CD ROM (which is second on the list after the Internal HDD). Any help would be appreciated.
 

A:Satellite M105 bootup problem -- series of 1 second beeps

There is a very good explanation of "Beep Codes" here:-
http://www.techspot.com/vb/topic95391.html
Hope it helps.
 

http://www.techspot.com/community/topics/satellite-m105-bootup-problem-series-of-1-second-beeps.179467/
Relevancy 53.32%

I would greatly appreciate advice on the following My Sat Pro M - PSM E- D G laptop has partitions created by Acronis Disk Director Suit v C OS-Win XP Pro SP D Programs E Data amp Downloads F Backups After booting the laptop Mode Pro Recovery Product CD M70-220 Recovery for Expert in Using Satellite Re: into Win Re: Using Expert Recovery Mode in Product Recovery CD for Satellite Pro M70-220 XP I inserted the Toshiba Product Recovery CD into the DVD-RAM drive and navigated Re: Using Expert Recovery Mode in Product Recovery CD for Satellite Pro M70-220 to BMP folder R G INST BMP where I found the file quot menu bmp quot which gives Recovery options Recover entire Hard disk Warning All stored data o your computer will be lost Factory pre-installed software will be installed Expert Recovery Mode Warning This is for PC experts only Factory pre-installed Software can be installed onto an existing partition My questions are with respect to using the quot Expert Recovery Mode quot - will I be able to use the quot Expert Recovery Mode quot of the Recovery CD to reinstall the Win XP Pro factory pre-installed software onto my C partition whilst not affecting the D E amp F partitions - will I be able to format the C partition using the quot Expert Recovery Mode quot without formatting the other partitions - what is the exact quot Expert Recovery Mode quot procedure - where can I find further info on the quot Expert Recovery Mode quot procedure Thank you AlanCB

A:Re: Using Expert Recovery Mode in Product Recovery CD for Satellite Pro M70-220

>will I be able to use the "Expert Recovery Mode" of the Recovery CD to reinstall the Win XP Pro (factory pre-installed software) onto my C: partition, whilst not affecting the D, E & F partitions

Yes, this should be possible. Using the Expert Recovery Mode you should get the Ghost window in which you could select the partition where the OS should be installed. In such case only this partition would be formatted.

> will I be able to format the C: partition, using the "Expert Recovery Mode", without formatting the other partitions?

Yes, theoretically this should be possible.

> what is the exact "Expert Recovery Mode" procedure ?
As I mentioned above, this mode allows you to restore the OS on a certain partition and only this partition will be formatted.

> where can I find further info on the "Expert Recovery Mode" procedure ?
How about searching here in the forum?
I found this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=7302&#7302

https://forum.toshiba.eu/showthread.php?46361-Re-Using-Expert-Recovery-Mode-in-Product-Recovery-CD-for-Satellite-Pro-M70-220
Relevancy 53.32%

My two-year old Satellite C -A- X suffered a major hard drive crash a few weeks ago My data has been backed up but I've been unable to repair my PC and as I hadn't created any recovery media I bought a system recovery USB C75-A-14X: failed - Satellite error; recovery recovery USB System stick from Toshiba I received the USB stick today and attempted to restore my laptop to its Satellite C75-A-14X: System recovery USB - error; recovery failed factory default settings I left my laptop to perform the recovery for about an hour or so When I Satellite C75-A-14X: System recovery USB - error; recovery failed returned the screen said that there was an error I didn't make a note of the error code and the recovery had failed Now when I restart my laptop I get a blue screen with the following text quot Recovery Your PC needs to be repaired A required device isn't connected or can't be accessed Error code xc f You'll need to use the recovery tools on your installation media If you don't have any installation media like a disc or USB device contact your system administrator or PC manufacturer Press Enter to try again Press F for Startup Settings Press Esc for UEFI Firmware Settings quot When I press Enter or F my laptop remains on the blue screen with the above text Pressing Esc is the only option at this screen that works How can I re-attempt restoring factory settings from the recovery USB stick

https://forum.toshiba.eu/showthread.php?93068-Satellite-C75-A-14X-System-recovery-USB-error-recovery-failed
Relevancy 52.89%

I want to update my graphic accelerator driver which is Mobile Intel 4 Series Express Chipset Family.
On the Intel's website I've found for this accelerator and Win XP OS new driver which has been released 31.3.2009, its version is 14.38.3.5047.

Though I can't install it because this driver isn't verified by Toshiba and on Toshiba's website is driver which is one year old (of course I've got this one). So, is some way to install new driver from Intel or can you please this driver verified?

BTW If latest drivers are more than one year old, it doesn't look like good support.

Zdenek Konecny

A:Intel graphic accelerator driver update on Satellite Pro U series

Hmm I install the Intel-sourced drivers on my laptop successfully, maybe things have changed.

Anyway have you tried the drivers from a newer Toshiba model?

Is there a reason you want to update the driver? i.e. Do the new drivers fix a problem you are seeing?

https://forum.toshiba.eu/showthread.php?44489-Intel-graphic-accelerator-driver-update-on-Satellite-Pro-U-series
Relevancy 52.89%

Hi,

I install all drivers for Toshiba Satellite L50-B-1K4 /windows 7/
but
Intel(R) 8 Series xHCI HC - 9C31
this one is missing... Any help please?

A:Satellite L50-B-1K4 - Intel 8 Series xHCI HC - 9C31 - missing device

What 9C31 is you can check on http://www.pcidatabase.com/
I presume it could be USB 3.0 driver. I found download link on Intel download page.

You can test it.

Have you installed Intel chipset utility?

https://forum.toshiba.eu/showthread.php?80665-Satellite-L50-B-1K4-Intel-8-Series-xHCI-HC-9C31-missing-device
Relevancy 52.89%

I have always used my keyboard for volume on/off and up/down. All of a sudden, a few days ago, this stopped working and i have to control the volume via the task bar instead. Can anyone tell me what happened, and can i change it back? I hope everyone can understand that - i'm not very good with computer speak lol

https://forum.toshiba.eu/showthread.php?94143-Satellite-L-series-keyboard-volume-control-stopped-working
Relevancy 52.46%

Hello,

I have a Windows7(Home Premium) pre-installed Sony Vaio Nw20SF/S laptop in which i tried to create Recovery disks(2 DVD's)... using Vaio Recovery disk Software(Inbuit). It stopped(or hanged donno) in the middle while creating the 2nd DVD then that was cancelled, but a new partition with no FileSystem is created for about 9.3 GB when i look in the Computer Management tool present.

Now, i have two questions to ask...

1) Does Sony Vaio models with Windows 7 comes with Hidden Recovery Disk Partition(D:... something like that or not)???
2) What to do or how to make use of the 9.3GB partition present???

Please Help.
Thanks a lot in Advance...

A:Regarding Recovery disk and Recovery disk partitions in Sony Vaio NW series...

Help please.....

http://www.techsupportforum.com/forums/f217/regarding-recovery-disk-and-recovery-disk-partitions-in-sony-vaio-nw-series-442565.html
Relevancy 52.46%

I think I posted this on the wrong forum at first- hope this one is ok Hello everybody first let me say hi as I m new to this site I have a Toshiba Satellite U -S with an Intel Pentium Duel-Core processor T MB DDR SDRAM MB X MB uses PC - GB HD I m looking to upgrade the RAM because it runs a U305 series Core making a RAM Toshiba for Need Satellite please purchase help Duel little slow for my tastes with Windows Vista My question is would it be beneficial to invest in another Duel Channel Duel Core RAM Stick or would it be just the same just to purchase a regular old memory stick non duel core BTW the RAM s that I m looking at in particular are CORSAIR Need help please making a Duel Core RAM purchase for Toshiba Satellite U305 series ValueSelect GB x MB -Pin DDR SO-DIMM DDR PC Dual Channel Kit Notebook Memory http www newegg com Product Product aspx Item N E -or- Kingston GB DDR PC SO-DIMM NOTEBOOK MEMORY http shop outpost com product I don t know much about duel core duel channel but when I went on to Crucial s memory uprgrade site it said the following Q Does my computer support Need help please making a Duel Core RAM purchase for Toshiba Satellite U305 series dual-channel memory A Yes To benefit from the performance advantages offered Need help please making a Duel Core RAM purchase for Toshiba Satellite U305 series by dual-channel systems you should install memory in identical pairs Installing a kitted pair is the best way to ensure that your modules are identical right down to the chip count Click to expand So it seems to me like it would be better to buy the duel core Oh and one last question does maximizing increasing RAM decrease the battery life on a notebook computer Sorry for all the questions I am somewhat of a noob Thanks in advance nbsp

A:Need help please making a Duel Core RAM purchase for Toshiba Satellite U305 series

Thanks again

Thanks Again.

Found a replacement for my motherboard.

Unfortunately the support personnel there was unsure if some chipset could still be usable. Is it possible that any of them would be damaged or already have been damaged? How can I check without a second pc to check them?

I desperately need to fix my pc. My brother's projects are all inside the hard drives (I have two) which is a little difficult to extract in pc rental shops without the software (their school issued it for uniformity).
 

http://www.techspot.com/community/topics/need-help-please-making-a-duel-core-ram-purchase-for-toshiba-satellite-u305-series.82776/
Relevancy 51.17%

Hi

Toshiba L series laptop - L50-B1-1NL
Toshiba Original Recovery media on usb stick
Do I use a usb2 port or usb3 port to install/recover from

Do I reset BIOS settings to dwfault before recovery
Where would I find a copy of BIOS settings for the L50-B1-1NL

regards

https://forum.toshiba.eu/showthread.php?91920-Toshiba-L-series-laptop-L50-B1-1NL-Recovery
Relevancy 51.17%

Windows Recovery Series is a rogue security software which will report that malware has been detected on your computer in an attempt to scare you into buying this malicious software In reality none of the reported issues are real and are only used to scare you into buying Windows Recovery Series and stealing your personal financial information As part of its self-defense mechanism Windows Recovery Series Remove Windows Series Recovery has installed a rootkit on your computer which will disable the Windows Task Manager and will block Remove Windows Recovery Series you from running any program that could lead to its removal Windows Recovery Series is a scam and you should ignore any alerts that this malicious software might generate Under no circumstance should you buy this rogue security software as this could lead to identity theft and if you have you should contact your credit card company and dispute the charge stating that the program is a scam and a computer virus Removal instructions for Windows Recovery Series virus This is a self-help guide use at your own risk If you experience problems completing this guide or the problem persists after following the instructions below or would like to have one of our staff members guide you through the process please start a new thread in our Malware Removal Assistance forum STEP Start your computer in Safe Mode with Networking Remove all floppy disks CDs and DVDs from your computer and then restart your computer Press and hold the F key as your computer restarts Please keep in mind that you need to press the F key before the Windows start-up logo appears Note With some computers if you press and hold a key as the computer is booting you will get a stuck key message If this occurs instead of pressing and holding the quot F key quot tap the quot F key quot continuously until you get the Advanced Boot Options screen On the Advanced Boot Options screen use the arrow keys to highlight Safe Mode with Networking and then press ENTER STEP Run RKill to terminate known malware processes associated with Windows Recovery Series RKill is a program that will attempt to terminate all malicious processes associated with Windows Recovery Series so that we will be able to perform the next step without being interrupted by this malicious software Because this utility will only stop Windows Recovery Series running process and does not delete any files after running it you should not reboot your computer as any malware processes that are configured to start automatically will just be started again While your computer is in lt em gt Safe Mode with Networking lt em gt please download the latest official version of RKill Please note that we will use a renamed version of RKILL so that Windows Recovery Series won t block this utility from running RKILL DOWNLOAD LINK This link will automatically download RKILL renamed as iExplore exe Double-click on the iExplore exe icon in order to automatically attempt to stop any processes associated with Windows Recovery Series RKill will now start working in the background please be patient while the program looks for various malware programs and tries to terminate them When Rkill has completed its task it will generate a log You can then proceed with the rest of the guide WARNING Do not reboot your computer after running RKill as the malware process will start again preventing you from properly performing the next step STEP Remove Windows Recovery Series malicious files with Malwarebytes Anti-Malware FREE Download the latest official version of Malwarebytes Anti-Malware FREE MALWAREBYTES ANTI-MALWARE DOWNLOAD LINK This link will open a download page in a new window from where you can download Malwarebytes Anti-Malware Free Start the Malwarebytes Anti-Malware installation process by double clicking on mbam-setup file When the installation begins keep following the prompts in order to continue with the setup process Do not make any changes to default settings and when the... Read more

https://malwaretips.com/threads/remove-windows-recovery-series.7545/
Relevancy 51.17%

Hi there,

I'm having problems starting up my laptop. I hit the power button and it goes straight to Windows Error Recovery. I then hit "Launch up Recovery (recommended). It then just moves to a blue screen and never actually gets to a recovery page or where I can enter login. If I press start windows normally the same thing happens.

Is there a way I can reset to factory without starting laptop?

Thanks for any help.

Jamie.

Ps sorry for any typo's/poor grammar, writing on phone isn't easy.
 

Relevancy 51.17%

Hello,

i need some help... I have a new Z830-10J. During the first
setup the Notebook crashed and rebooted. I always get
the error

"The computer restarted unexpectedly or encountered
an unexpected error. Windows installation cannot proceed. To install
Windows, click "OK" to restart the computer, and then restart the installation."

After the restart i get the same error again and again... Pushing F8 does not bring
the repair options. Every option (Safe Mode, Debugging and so on) only leads to the
same error.

What can i do?

Best regards,
Markus

A:Satellite Z830-10J stucks in a installation loop

meanwhile i have an bootable USB stick with win7, but the
repairoptions does not find a backup to repair... but i see
3 partiions, besides the normal system theres a backup and
a boot partition.

Edit:
Im going to download the Win 7 Home Prem. trial version and
will install that one. Do you think i am able to "restore" the system
after the installation? Otherwise the whole software from tohsiba
is lost :(

Message was edited by: ltkrogoth

https://forum.toshiba.eu/showthread.php?68597-Satellite-Z830-10J-stucks-in-a-installation-loop
Relevancy 51.17%

Hey guys
I have a Satellite A55-S3061. It will not boot to up correctly.
So I install a FRESH copy of XP pro. But now during the XP setup first state when it restart the laptop automatically. Then when it starts it loop at Windows Advance Option Menu. Does not matter I DO, even tried installing windows with another copy that I borrow from a friend. Same issue.
BTW tried all option including Last known good configuration.
I did say I install a fresh copy with now file on the hard driver. ( Don't I )
I even remove the HDD from the laptop and place it into a desktop to make sure it was completely formatted correctly.
Even had the ram replace.
oh.......hmmmmmm the laptop keep beeping
Any ideas? :suspiciou
 

A:Satellite A55-S3061 loop into safe mode

The beep codes can tell you a lot. Look elsewhere on this site for Beep Codes

How old is the hard drive?
Could it be over-heating caused by air channels plugged with dust and lint?
How much memory do you have installed?
Did this happen after you upgraded something, or installed new software or a new device?
 

http://www.techspot.com/community/topics/satellite-a55-s3061-loop-into-safe-mode.147799/
Relevancy 51.17%

Hello i have a big problem with my toshiba it is stuck in a reboot loop. Cant go to recovery mode. Need help for a other way to recover or factory reset my pc.

If you need more info just ask

https://forum.toshiba.eu/showthread.php?92838-Toshiba-Satellite-C660-1F5-boots-in-loop
Relevancy 50.74%

Hey folks Sorry for not starting out in the intro forum I am up against it and need some help My wife works from home as a medical transcriptionist Her laptop is an Acer with a version on Windows I got somewhere and to be honest can t remember She got swarmed with this Windows Recovery crashed my laptop Windows Recovery Series Series virus malware thing yesterday I Windows Recovery Series crashed my laptop got the thing in safe mode and ran a quick scan of Malwarebytes It looked great no more virus I decided to run the full scan Windows Recovery Series crashed my laptop and thats when it happened I got some kind of error from Malwarebytes and it froze up I tried to start it and here we are It wont boot in safe mode networking command nothing I copied a recovery disk and tried to run it but it will not read the disk My wife needs this laptop for work Any advice I am a master plumber and would gladly swap trade secrets with any it folks out there I can usually find my way out of these tech issues but this has me baffled I sure would appreciate any input Many thanks Jeff Legg Billings Montana

A:Windows Recovery Series crashed my laptop

Hello, and sorry for the delay.

Please start the computer and tap F8 until the Advanced Boot Options menu opens. Select Repair Windows and let me know if that loads the Recovery environment and if you can enter it.

http://www.bleepingcomputer.com/forums/t/454892/windows-recovery-series-crashed-my-laptop/
Relevancy 50.74%

Toshiba Satellite 15.6-Inch Touch Screen Laptop (S55T-B5282)
Found laptop in Advanced Startup options with the CAPS LOCK and NUM LOCK buttons lit but unresponsive and touchpad dead as well. Plugged in USB keyboard and mouse, backed up data in safe mode, factory reset, but still CAPS LOCK and NUM LOCK buttons lit but unresponsive and touchpad dead. Naturally the warranty expired in Jan. 2016. Trolling the Toshiba community forum, lots of chatter about this but no real resolution. I don't see anything in the BIOS either. Suggestions? Thanks!

A:Satellite Boot Loop w/ dead Keyboard & Touchpad

If you can access safe mode using a USB keyboard and mouse can you do a System Restore to a date before the problem? If you have not backed up data on the desktop after the restore date move it to My Documents before doing the System Restore.

http://www.bleepingcomputer.com/forums/t/611711/satellite-boot-loop-w-dead-keyboard-touchpad/
Relevancy 50.74%

So today I was using my laptop/computer when for some reason it just froze. At the time I had a USB plugged in (because I was using it for some work) so I pulled the USB out to use it on another computer. I finished my work eventually on my desktop, but when I tried to turn on my laptop, it would display the screen with toshiba, then the Microsoft Corp page and then it just stops, and restarts at the toshiba page. Help please
 

https://forums.techguy.org/threads/restarting-loop-on-toshiba-satellite-a135-s4666.1155616/
Relevancy 50.31%

Alt-f10 is not working to start e-recovery software and also my backup acer software not read into DVD drive and eject immediately.. Yes I have original HD included windows vista. due to some problem one of IT people format all C and D drive and install windows 7. error showing when pressing alt-f10 same as like Path:\windows\system32\winload.exe Partion:2 Hard Disk:8fa61239 [ /NO EXECUTE = OPTIN ]

A:Recovery Acer Software aspire product 45.. series

"Usually" the Acer recovery partition was a hidden partition; inaccessible by the usual means; at least it was some time back. Sometimes called a PQ partition if I remember correctly (at least for Acer laptops a wee while back). It was usually first item on the hard drive too.You seem to suggest that the system was initially Vista; then you took it up to win-7... Possibly in the process of going to win-7 the (Vista) recovery partition was destroyed; or at least overwritten by a win-7 version?This rather olde post has a very helpful response from Johnw - it's the best answer entry too.http://tinyurl.com/hl8nugxFollow John's routine and see if you can "see" any evidence of a recovery partition?This is another approach too:http://tinyurl.com/l7u3q5zand this may also explain "your" particular drive partitioning as was and possibly is now:http://tinyurl.com/hr4jceoIt would appear that in some more recent systems the PQ/Recovery partition is now flagged as D: ; and thus if per chance your IT chums got at that D partition on your laptop.. then they erased its contents when they reformatted it...?

http://www.computing.net/answers/windows-vista/recovery-acer-software-aspire-product-45-series/14078.html
Relevancy 50.31%

I had to convert my HP6000 series desktop to its factory settings ,including Windows 7. Prior to having to do that, I had upgraded to Windows 10. I had made recovery discs. When I put in the discovery discs, it does not read them. How can I recover my files?

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/HP-pavilion-P6000-series-does-not-read-recovery-discs/td-p/5845603
Relevancy 50.31%

i have no recovery disk nor my password for my T-series W350I gateway laptop. this was passed down from an old friend to help me during my first stages in my college journey.

A:gateway T-series reboot with no password or recovery disk..

gateway t series w350i restore cdhttp://is.gd/BBwNxj

http://www.computing.net/answers/windows-vista/gateway-tseries-reboot-with-no-password-or-recovery-disk/13420.html
Relevancy 50.31%

Hello AllI would first like to say that I am grateful for all the folks at Bleeping Computer I have Recovery Windows everywhere Series notepads Removed and desktop been assisted by them more than once and remember they do accept donations to keep the site going I recently had the virus windows recovery tool and it hid all of my documents Very scary moment for me I went through the process Windows Recovery Series Removed and desktop notepads everywhere to remove it with malware bytes and secunia psi and went into the command prompt to unhide everything Now in all of my documents pictures videos desktop I have a notepad log file with ShellClassInfo LocalizedResourceName SystemRoot system shell dll - This also pops up every time the laptop starts up Should I be concerned How do I stop it from popping up on every boot up This one is in my documents ShellClassInfo LocalizedResourceName SystemRoot system shell dll - IconResource SystemRoot system imageres dll - IconFile SystemRoot system shell dllIconIndex - This one is in my pictures ShellClassInfo LocalizedResourceName SystemRoot system shell dll - InfoTip SystemRoot system shell dll - IconResource SystemRoot system imageres dll - IconFile SystemRoot system shell dllIconIndex - LocalizedFileNames Sample Pictures lnk SystemRoot system shell dll - Thanks for your help Mark

A:Windows Recovery Series Removed and desktop notepads everywhere

Open your C driveOn top click on Organize-Folder & search optionsClick on view tabIn advanced settingsMake sure to check mark DON'T show hidden filescheck mark HIDE protected operating system filesClick okNow,press Windows+R key and typeshell:common startup and click okDelete the desktop.ini file from the startup foldergood luck

http://www.bleepingcomputer.com/forums/t/453056/windows-recovery-series-removed-and-desktop-notepads-everywhere/
Relevancy 50.31%

Hi
Toshiba L series laptop - L50-B1-1NL
Toshiba Original Recovery media on usb stick
Do I use a usb port2 or usb port3 to install/recover from
regards

https://forum.toshiba.eu/showthread.php?91919-Toshiba-L-series-laptop-L50-B1-1NL-Recovery-media-flashdrive
Relevancy 49.88%

Wow what a catastrophe this is a windows - bit machine Satellite C PSC GA- stuck an Win C660 loop BSOD 10 endless after Satellite upgrade in E M stuck in an Satellite C660 stuck in an endless BSOD loop after Win 10 upgrade endless BSOD loop The lappy said it was ok to upgrade to windows so I did Now its stuck Satellite C660 stuck in an endless BSOD loop after Win 10 upgrade in a never ending BSOD loop So I decided to use the recover option and reinstall windows and then upgrade from there After mega downloads of updates and Satellite C660 stuck in an endless BSOD loop after Win 10 upgrade finally got to the stage where there was no updates left to get I then decided to upgrade to windows again Now stuck in a never ending BSOD loop again Can someone point me to the driver that's failing I can get to safe mode ok device manager has issues is under OTHER DEVICES is a Unknown device is Generic pnp monitor I have tried Toshiba website for updates to windows bit drivers thinking this might be the best step but the links are bad and the webpage says sorry no one home Also no network if I try logging to the safemode with networking it returns to BSOD screens HELP PLEASE

A:Satellite C660 stuck in an endless BSOD loop after Win 10 upgrade

Toshiba released an list with all Toshiba models supported for upgrade to Windows 10
http://win10upgrade.toshiba.com/swup...spx?region=TEG

Satellite C660 PSC1GA is not listed there and this means that this model isn’t supported for Win 10 and will not get Win 10 drivers.

Nevertheless the Win 10 should run on this unit because it meets the essential hardware requirements.

I guess that the BSOD loop appear due to some drivers which are not fully Win 10 compatible and probably these drivers must be removed before performing the Win 10 update.

To check the compatibility follow this steps:
Right-click the “Get Windows 10 icon” (on the right side of the taskbar) and then click "Check your upgrade status." In the Get Windows 10 app, click the h menu (3 lines) and then click "Check your PC".Now you should see the list of compatibility issues

Also this kind of issue could be fixed by Microsoft update as mentioned in this article:
http://www.forbes.com/sites/amitchow...s-reboot-loop/

https://forum.toshiba.eu/showthread.php?84341-Satellite-C660-stuck-in-an-endless-BSOD-loop-after-Win-10-upgrade
Relevancy 49.88%

I really hope someone can help stuck Boot in U840 PSU4SA Satellite Loop infinite me My wife's laptop is stuck in a boot loop that is continuous When the power button is pressed the Toshiba logo appears then it moves to the BIOS screen with the following info displayed quot The operating system did not shutdown cleanly Reconstructiong Cache Metadata Please do not interrupt this process Reading Packed Metadata into memory Done Processing Delta Log Record quot and then it dies returns to the Toshiba logo and repeats Ad Satellite U840 PSU4SA stuck in infinite Boot Loop nauseum I have tried to boot into safe Satellite U840 PSU4SA stuck in infinite Boot Loop mode by pressing Fn F to no avail I took the base off the laptop to try and remove the battery but I'm no PC hardware expert and I didn't want to mess it up The full specs are Toshiba Satellite U Part no PSU SA - Windows Bit Home Premium I have Linux Mint installed on a USB Drive I would like to boot from the USB no CD DVDRW in this ultrabook to recover data if possible Should I remove the HDD and SSD I have read some forums that say that often having Windows on the SSD can cause this problem

A:Satellite U840 PSU4SA stuck in infinite Boot Loop

Hi

Try this workaround:
Power up the unit and press F8 button
Now the Advanced boot menu should appear where you could choose between different options.
I would recommend you to try the option ?Last known good configuration?.
If this will not work, try the option: ?Repair my Computer?.
Here choose the first option above.

Of course booting from the Linux live USB flash memory stick would allow you to get the access to the data and to backup the important files.

https://forum.toshiba.eu/showthread.php?76616-Satellite-U840-PSU4SA-stuck-in-infinite-Boot-Loop
Relevancy 49.02%

Mod Edit Moved to Malware Removal Logs forum boopmeSo obviously I don't need to explain the recovery loop to you guys My computer has never really had any problems before and I'm extremely particular about running my antivirus programs I use Malware-Bytes and Spybot S amp D A few days ago my Dell Inspiron n laptop with Windows -bit not sure which make or version I'm running took a crap on me and went into an infinite recovery options reboot loop I have a Please using loop Farbar recovery Need help Help!! with copy of the most current version of Farbar and my most recent FRST txt file is posted below so I've gotten as far as running the program scanning the drive and saving the txt file I'm hoping someone here can direct me as to what to do next I REALLY need my computer back as there's extremely important work saved that I hadn't had a Need help with recovery loop using Farbar Please Help!! chance to move to my external yet Hope someone can Need help with recovery loop using Farbar Please Help!! help me I'll gladly follow instructions on whatever is suggested Also I should add at this point I cannot boot my computer at all Not even in safe mode -SmallChange- Scan result of Farbar Recovery Scan Tool FRST x Version - - Ran by SYSTEM on MININT- IMCLRQ - - Running from G Platform Windows Home Premium Service Pack X Language English United States Internet Explorer Version Boot Mode RecoveryDefault ControlSet ATTENTION gt If the system is bootable FRST must be run from normal or Safe mode to create a complete log Tutorial for Farbar Recovery Scan Tool http www geekstogo com forum topic -frst-tutorial-how-to-use-farbar-recovery-scan-tool Registry Whitelisted If an entry is included in the fixlist the registry item will be restored to default or removed The file will not be moved HKLM Run MSC gt c Program Files Microsoft Security Client msseces exe - - Microsoft Corporation HKLM Run Apoint gt C Program Files DellTPad Apoint exe - - Alps Electric Co Ltd HKLM Run BTMTrayAgent gt rundll exe C Program Files x Intel Bluetooth btmshell dll TrayAppHKLM-x Run SDTray gt C Program Files x Spybot - Search amp Destroy SDTray exe - - Safer-Networking Ltd HKLM-x Run DelaypluginInstall gt C ProgramData Wondershare Video Converter Ultimate DelayPluginI exeHKLM-x Run SunJavaUpdateSched gt C Program Files x Common Files Java Java Update jusched exe - - Oracle Corporation HKLM-x Run QuickTime Task gt C Program Files x QuickTime QTTask exe - - Apple Inc HKLM-x Run Adobe ARM gt C Program Files x Common Files Adobe ARM AdobeARM exe - - Adobe Systems Incorporated Winlogon Notify igfxcui C Windows system igfxdev dll Intel Corporation Winlogon Notify SDWinLogon-x SDWinLogon dll X BootExecute autocheck autochk sdnclean exe Services Whitelisted If an entry is included in the fixlist it will be removed from the registry The file will not be moved unless listed separately S dbupdate C Program Files x Dropbox Update DropboxUpdate exe - - Dropbox Inc S dbupdatem C Program Files x Dropbox Update DropboxUpdate exe - - Dropbox Inc S MBAMScheduler C Program Files x Malwarebytes Anti-Malware mbamscheduler exe - - Malwarebytes S MBAMService C Program Files x Malwarebytes Anti-Malware mbamservice exe - - Malwarebytes S MsMpSvc c Program Files Microsoft Security Client MsMpEng exe - - Microsoft Corporation S NisSrv c Program Files Microsoft Security Client NisSrv exe - - Microsoft Corporation S SDScannerService C Program Files x Spybot - Search amp Destroy SDFSSvc exe - - Safer-Networking Ltd S SDUpdateService C Program Files x Spybot - Search amp Destroy SDUpdSvc exe - - Safer-Networking Ltd S SDWSCService C Program Files x Spybot - Search amp Destroy SDWSCSvc exe - - Safer-Networking Ltd S WinDefend C Program Files Windows Defender mpsvc dll - - Microsoft Corporation S ZAtheros Bt amp Wlan Coex Agent C Program Files x Dell Wireless Bluetooth Suite Ath CoexAgent exe - - Atheros S ZAtheros Wlan Agent C Program Files x Dell Wireless Ath WlanAgent exe... Read more

A:Need help with recovery loop using Farbar Please Help!!

Greetings smallchange38 and to BleepingComputer's Virus/Trojan/Spyware/Malware Removal forum.My name is Oh My! and I am here to help you! Now that we are "friends" please call me Gary.If you would allow me to call you by your first name I would prefer to do that.===================================================Ground Rules:First, I would like to inform you that most of us here at Bleeping Computer offer our expert assistance out of the goodness of our hearts. Please try to match our commitment to you with your patience toward us. If this was easy we would never have met. Please do not run any tools or take any steps other than those I will provide for you while we work on your computer together. I need to be certain about the state of your computer in order to provide appropriate and effective steps for you to take. Most often "well intentioned" (and usually panic driven!) independent efforts can make things much worse for both of us. If at any point you would prefer to take your own steps please let me know, I will not be offended. I would be happy to focus on the many others who are waiting in line for assistance.Please perform all steps in the order they are listed in each set of instructions. Some steps may be a bit complicated. If things are not clear, be sure to stop and let me know. We need to work on this together with confidence.Please copy and paste all logs into your post unless directed otherwise. Please do not re-run any programs I suggest. If you encounter problems simply stop and tell me.When you post your reply, use the button instead.In the upper right hand corner of the topic you will see the button. Click on this then choose Immediate E-Mail notification and then Proceed and you will be sent an email once I have posted a response.If you do not reply to your topic after 5 days we assume it has been abandoned and I will close it.When your computer is clean I will alert you of such. I will also provide for you detailed information about how you can combat future infections.I would like to remind you to make no further changes to your computer unless I direct you to do so.===================================================Now that I am assisting you, you can expect that I will be very responsive to your situation. If you are able, I would request you check this thread at least once per day so that we can try to resolve your issues effectively and efficiently. If you are going to be delayed please be considerate and post that information so that I know you are still with me. Unfortunately, there are many people waiting to be assisted and not enough of us at BleepingComputer to go around. I appreciate your understanding and diligence.Thank you for your patience thus far.Please run this program for me.===================================================Farbar's Recovery Scan Tool - Run Fix--------------------From a clean computer press the windows key + r on your keyboard at the same time. Type in notepad and press EnterClick Format then check Word WrapPlease copy and paste the contents of the below code box into the open notepad and save it on the flashdrive as fixlist.txtWinlogon\Notify\SDWinLogon-x32: SDWinLogon.dll [X]
S3 ALSysIO; \??\C:\Users\Owner\AppData\Local\Temp\ALSysIO64.sys [X]
2016-01-22 13:44 - 2016-01-22 13:44 - 00003318 _____ C:\Windows\System32\Tasks\{2D816804-4D19-46FA-B284-2F6C0F0085DE}
C:\Users\Owner\AppData\Local\Temp\AskSLib.dll
C:\Users\Owner\AppData\Local\Temp\cres.dll
C:\Users\Owner\AppData\Local\Temp\cshell.dll
C:\Users\Owner\AppData\Local\Temp\dropbox_sqlite_ext.{5f3e3153-5bce-5766-8f84-3e3e7ecf0d81}.tmpatguzx.dll
C:\Users\Owner\AppData\Local\Temp\guninst.exe
C:\Users\Owner\AppData\Local\Temp\KMPAddedCode_KMP_adpageopen_Step1.exe
C:\Users\Owner\AppData\Local\Temp\SIntf16.dll
C:\Users\Owner\AppData\Local\Temp\SIntf32.dll
C:\Users\Owner\AppData\Local\Temp\SIntfNT.dll
C:\Users\Owner\AppData\Local\Temp\SpotifyUninstall.exe
C:\Users\Owner\AppData\Local\Temp\sres.dll
C:\Users\Owner... Read more

http://www.bleepingcomputer.com/forums/t/605243/need-help-with-recovery-loop-using-farbar-please-help/
Relevancy 49.02%

Hello!So ive had an hp 15-g029wm (generic af, I know) for over three years now, and I'm finally getting hit with an issue. I can turn the device on, but after doing so, it says "Preparing Automatic Repair" and then after a five minute long black screen "Diagnosing your PC" and then "Repairing disk errors. This might take over an hour to complete." And then it kind of chills there forever. Also, I originally had windows 8 when I bought it, and then I was given a free upgrade to Windows 10. I don't know how to enter the bios menu or whatever, and I feel like I've mashed every button to get some sort of reaction out of this beast.Let me know your thoughts

http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Auto-Recovery-Loop/td-p/5685140
Relevancy 49.02%

Windows 7 RC 64-bit

Tried to load a 64-bit IPSec vpn client and received a bsd.
Rebooted into safe mode and perform system recovery.
All went well until reboot.
Now system continually returns to System Recovery Options even when I boot to safe mode.

Please help, really don't want to have to do a complete reinstall.

A:Windows 7 Recovery Loop

  
Quote: Originally Posted by steiner


Windows 7 RC 64-bit

Tried to load a 64-bit IPSec vpn client and received a bsd.
Rebooted into safe mode and perform system recovery.
All went well until reboot.
Now system continually returns to System Recovery Options even when I boot to safe mode.

Please help, really don't want to have to do a complete reinstall.


Hi steiner and welcome to sevenforums.

Do you have a backup to restore from? have you tried booting from the win 7 dvd? we could also porbably use some sys specs.

Ken

http://www.sevenforums.com/backup-restore/18657-windows-7-recovery-loop.html
Relevancy 49.02%

i had a virus, so i was advised to do a system recovery since it was to hard to remove it. i did system recovery by pressing f10 when the computers started. i don't have a cd. the system recovery progress went well when it ended it ask me to restart the computer or turn off. i chose turn off, but when i tried to turn it on it created a restart loop. windows doesn't load the computers restarts itself after a little while after i turn it on. any help would be good. thank you.

A:system recovery loop

System manufacturer and model?

Louis

http://www.bleepingcomputer.com/forums/t/206859/system-recovery-loop/
Relevancy 49.02%

Hello Having a major issue with Windows x startup recovery Last week my laptop came up with a corrupt file error when I went to open programs iTunes Word Google It would have a window that would pop up with the error and then a small yellow triangle with an exclamation point would display in bottom right corner saying quot iTunes exe - Corrupt File The file or directory C Windows winsxs x microsoft vc crt fc b b a e e b none f ebcb eb is corrupt and unreadable Please run Loop Recovery System the Chkdsk utility System Recovery Loop quot Upon seeing this I ran Malwarebytes but came up with nothing I decided to restart my computer Upon restart Windows did not start properly instead going to a windows recovery option I ran the Startup Repair looked like was going to take a while so I eventually just left it running overnight to find it finally completed in the morning The repair had failed and the only thing that showed up as an error was the following Diagnosis and repair details Root Cause found ----------------------------- Boot manager failed to find OS loader Repair action Fire repair Result Failed Error code X Time taken ms Repair action Boot configuration data store repair Result Failed Error code x Time taken ms Yesterday my husband and I attempted to use the Windows disk in hopes of fixing the OS loader problem However we are never given any of the options that most people mention showing up either starting with loading from the hard drive OR loading from the CD DVD We have also tried to run all the options listed when we run the Bootrec in the command prompt screen But all attempts to use any of those options have led to failure This morning I ran the Farbar scan recovery tool The follow is the result of the scan If anyone has any insight on how to proceed in getting my laptop back up and running please help THANK YOU -Lath Scan result of Farbar Recovery Scan Tool FRST txt x Version - - Ran by SYSTEM on MININT-M QJLF on - - Running from e Platform Windows Home Premium X OS Language English United States Internet Explorer Version Boot Mode Recovery The current controlset is ControlSet ATTENTION gt If the system is bootable FRST must be run from normal or Safe mode to create a complete log Tutorial for Farbar Recovery Scan Tool http www geekstogo com forum topic -frst-tutorial-how-to-use-farbar-recovery-scan-tool Registry Whitelisted If an entry is included in the fixlist the registry item will be restored to default or removed The file will not be moved HKLM Run SynTPEnh gt C Program Files Synaptics SynTP SynTPEnh exe - - Synaptics Incorporated HKLM Run SysTrayApp gt C Program Files IDT WDM sttray exe - - IDT Inc HKLM Run AlienFX Controller gt C Program Files Alienware Command Center AlienwareAlienFXController exe - - Alienware Corporation HKLM Run gt X HKLM Run XboxStat gt C Program Files Microsoft Xbox Accessories XboxStat exe - - Microsoft Corporation HKLM-x Run FAStartup gt X HKLM-x Run OSD gt c Program Files OSD Launch exe - - HH HKLM-x Run Adobe ARM gt quot C Program Files x Common Files Adobe ARM AdobeARM exe quot HKLM-x Run APSDaemon gt C Program Files x Common Files Apple Apple Application Support APSDaemon exe - - Apple Inc HKLM-x Run iTunesHelper gt C Program Files x iTunes iTunesHelper exe - - Apple Inc HKLM-x Run SunJavaUpdateSched gt C Program Files x Common Files Java Java Update jusched exe - - Oracle Corporation HKLM Winlogon Userinit C Windows system userinit exe HKLM-x Winlogon Userinit userinit exe X Winlogon Notify FastAccess-x C Program Files Alienware Command Center AlienSense FALogNot dll HKU Alien RunOnce FlashPlayerUpdate gt C Windows SysWOW Macromed Flash FlashUtil Plugin exe - - Adobe Systems Incorporated HKU Alien Policies system LogonHoursAction HKU Alien Policies system DontDisplayLogonHoursWarnings HKU Default Run Sidebar gt ProgramFiles Windows Sidebar Sidebar exe autoRun HKU Default User Run Sidebar gt ProgramFiles Windows Sidebar Sidebar exe autoRun HKU Home Alien Run Google Update gt C ... Read more

https://forums.techguy.org/threads/system-recovery-loop.1134054/
Relevancy 49.02%

Everytime i try to boot up my pc, it automatically goes to the system recovery options menu. No matter what i do, if i restart it comes straight back to this screen. ive tried sytstem restoring numerous times, tried booting in safe mode. But no matter what its the same outcome. Please help.
 

Relevancy 49.02%

HP laptop would boot to "blue screen" - could not read error quick enough - finally decided to restore to original setup through HP Recover Manager. Made a backup of files and proceeded with reinstall. Everything looked fine - HP software installing, desktop was there, installed video card driver... Installed the video driver, laptop shut down and now stuck in a loop with Recovery Manager. Keeps asking if I want to recreate a factory image. Already done that...stuck in a loop. Help!
 

https://forums.techguy.org/threads/hp-recovery-manager-loop.881244/
Relevancy 49.02%

So I custom built my computer for gaming. I used Windows7 Pro as an OS. It worked great for 2 weeks but when I was playing Minecraft it froze and I had to reset my computer and now I'm stuck on the Repair Loop. I've tried a lot of things. I really don't wish to reinstall Windows. Helppp! I've also tried chkdsk/r and /f. R worked the first time but when I rebooted again it returned to the loop.

A:System Recovery Loop.

What other things have you tried as you stated? I would recommend test your HDD by using diagnostics tools. From another pc if possible.

Downloading UBCD which is in my signature.Burn the ISO Image to a blank CD using Imgburn (How to burn a ISO Image using Imgburn) burn at lowest speed. With the newly burned cd boot with the cd go to HDD>Diagnostics>The make and model of your hard drive, Seagate, Maxtor, Drive Fitness which is Hitachi, Or Western Digital. Perform a short and long test. Could also be called "Standard" and "Extended" test or also "Comprehensive" test. Seagate HDD diagnostics tools will work on most Hard drives.

If you can not find the right test for your hard drive your OEM computer may have it's own hard drive diagnostics testing tool. Refer to your OEM computer documentation to find out how to access these test. Also try going to the manufacture of your machine to find documentation about it. Also consider going to the manufacture of your hard drive to look to see if they have hard drive diagnostics test. The ideal test or method would include an ISO that could be burned via an image to a cd which would be made bootable.

http://www.techsupportforum.com/forums/f217/system-recovery-loop-660262.html
Relevancy 48.59%

I bought my new laptop 2 days ago when I connected it to wifi from my mobile it will get stuck then i have to restart it by long pressing power button

http://en.community.dell.com/support-forums/laptop/f/3518/t/19996382
Relevancy 48.59%

So recently this problem started to happen and i have no idea why
While playing games, ANY games! the game with stuck with an error sound, more that of a crashing and be stuck there for a while and then comes back normal as if nothing happened
The frequency of these so called crashes increases with time, meaningly the longer i play the longer it starts to occur and wont go away.
I desperately need help as it is ruining my gaming experience
BTW i bought this 3-4 years from now
Currently on Windows 10 x64 with 4 gigs of RAM and with a AMD Phenom II X6 1090T processor if this info is needed
Please HELP!!!!
 

https://forums.techguy.org/threads/ati-amd-radeon-hd-6800-series-issue.1166729/
Relevancy 48.59%

Hello i have an issue reguarding my sound card X-Fi Platinum Champion Series issue thats is bothering me much I updated my hardware this weekend i ASUS P Platinum Series issue X-Fi Champion T SE Corsair Vengeance gb RevoDrive gb and ASUS GTX was using retail Win ultimate on the previous machine too with the same sound card and never had any issues like this Right after the fresh Win and drivers X-Fi Platinum Champion Series issue install i discovered that my headphones which i always use were not working when plugged in the front part of the SC system where you have SPDFI and line-in etc which i always used till that day One strange thing is that usualy when you install the drivers from CREATIVE site it downloads an automated update system to detect you SC and find newer updates and addons it gave the answer quot no Creative SC was found X-Fi Platinum Champion Series issue in your system quot ehm Right after i went in system properties and discovered that the device was installed X-Fi Platinum Champion Series issue correctly In the device manager it shows X-Fi HD audio mobo SC and or nVidia HD drivers dunno what are they for maybe they belong to the gtx i own I tryed many times to delete all the drivers and reinstall them newer and previous version from Creative site with no success i havent tryed any driver removal program yet sorry After that i plugged the headphones in the rear jack and i discovered that the sound quot works quot The problem is that the sound works almost fine in games in Black Ops the only things i discovered were some incomplete sounds or echos Music works fine but in windows when you double click to open the documents usualy there is a soft sound now what i hear is sometimes nothing sometimes cracks If i plug the headphones to the SC of my mobo then everything works fine I tryed to swap PCI slots st time I tryed to swap the bios date and time got reset dunno why nd time it was fine but still no help I updated the bios downloaded latest Intel Chipset drivers too tryed to disable the ASUS SC in the bios played with the properties of Sound in windows nothing Still cant get to fix the card and not even the front part of the card - Anyone of you experienced similar things - Is there maybe a conflict with the sound card X-Fi Realtek - Possibly that the new nVidia cards that have HD audio too come in conflict Thank you for your answer hope to resolve this issue

A:X-Fi Platinum Champion Series issue

I take it you installed a new motherboard. Most motherboards have integrated (on the motherboard) audio. If you are using a separate sound card you need to disable the Integrated audio in the BIOS. It can conflict with the separate sound card and cause many problems.

In regards to a video card with HDMI audio, go to the Control Panel, Hardware and Sound and finally the Sound Panel Playback section and set your sound card as the default playback device.

http://www.sevenforums.com/sound-audio/144727-x-fi-platinum-champion-series-issue.html
Relevancy 48.59%

So recently for the last few months my PC has been running oddly slow and about 4 days ago the PC would not boot up BIOS. The HD seems fine, I took a look at the caps on the Mother board and they look ok, but who really knows since I cant test  for leakage and etc. has anyone else had this issue with the 500 Series. I did roll back win 10 to an early version of win 10 but I think this is more of some part on the main board going bad.  

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/HP-500-010-xt-series-Mother-Board-issue/td-p/5650857
Relevancy 48.59%

Last week we purchased two different Lenovo Yoga 710 series laptops. Under the "Enter" key, the "page up" key and the "shift" key are reversed from normal keyboard position. Both function properly but are unlike any other keyboard I have seen. As a result, typing is interrupted  as I have to lift my fingers/wrist from the keyboard to reach the right shift key. This appears to be a major quality control defect in this series. Besides interrupting typing speed and causing typing errors, this can lead to potential carpal tunnel issues. I have been told that this is the "remodeled keyboard, " however, this is actually an incorrect placement of these keys. How will this issue be rectified?

https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Lenovo-710-series-keyboard-issue/td-p/3379379
Relevancy 48.59%

Hello I am not certain what happened with my laptop but upon a restart after downloading Kaspersky series 4 express chipset issue? the screen showed multiple vertical colored lines it looks similar to what a defragmenting screen looks like Since then I have updated the series express chipset family and have also attempted to adjust the color resolution etc but it is difficult considering the colors I am seeing 4 series express chipset issue? distort the test screens I had also put Kaspersky in my main laptop and my netbook that same day and did not have a problem I don t know if the chipset is shot or what or what is causing this This laptop is about years old and is used infrequently I don t know what 4 series express chipset issue? my next step should be and am uncertain if a clean install would repair the problem Any suggestions that I might try Thanks Tech Support Guy System Info Utility version 4 series express chipset issue? OS Version Microsoft Windows Home Premium Service Pack bit Processor Pentium R Dual-Core CPU T GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card Mobile Intel R Series Express Chipset Family Mb Hard Drives C Total - MB Free - MB Motherboard Dell Inc G F Antivirus Kaspersky PURE Updated and Enabled nbsp

A:4 series express chipset issue?

System Restore?
 

https://forums.techguy.org/threads/4-series-express-chipset-issue.1054835/