Windows Support Forum

hp pavilion g6 cant enable usb ports

Q: hp pavilion g6 cant enable usb ports

Hai, my product is hp pavilion g6 2320tx and im using windows 7 os in, the problem is that am not able to enable 2 usb ports out of 3(one port woking normally but remaining two are not detecting any usb devices..) pls guide me so that i can solve this problem thank u in advance

View Solution.

Relevancy 100%
Preferred Solution: hp pavilion g6 cant enable usb ports

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 25.8%

Hello everyone,

This happened couple days ago when my laptop started to act like crazy.. It used to freeze but two days ago it shuts down when I'm in the middle of doing something like Photoshop.. It even shut down while posting this thread once..
I thought it'd be a problem with the windows so I installed a fresh one but yet the problem is not solved..
And after some search on internet I came up with some apps like HDD and CPUID Monitor and here's a snapshot of the scan, and I wish someone of TECHSPOT family would help, that'll be so much appreciated..

Thank you.
Relevancy 27.09%

I have an lap top toshiba satellite c660 with both usb ports phisicaly damaged and after replacement they didnt worked , I mentioned betwen externel pins existe power 0,5 mA but middle pins I m not sure if they work,what should I do?
Relevancy 25.37%

Hello everyone,

I have an Hp Pavilion that I got about 2 years ago and I do play games on it. One game in general which is League of Legends. My concern is that if anyone knows about this game during teamfights when the computer is operating extensively because of all the action going on I always frame lag. My frames drop only during fights. When nothing is happening my frames are okay. As well other programs on my computer run slowly now as well like windows media player and just when I'm starting programs up on my comp. This happened now so long ago and it was a sudden change. I don't know what to try anymore. I have reformatted my comp and still the same issue. Help would be much appreciated thank you.

A:Hp Pavilion Dv7 FPS drop during games

The HP Pavilion could be over-heating. After years of use, the CPU's thermal pads and paste become hardened and this causes the CPU to run hotter and hotter causing game play to suffer
Relevancy 24.94%

Hello all,

I've recently bought a HP Pavilion 15-n252sq laptop, with Free Dos - unfortunately I can't install Windows 7 over it, due to the following error I keep receiveing in the Installation screen:

"Select the driver to be installed" - and regardless of the paths I have and the available folders, I can not seem to proceed wtih the W7 installation.

Please notice that, I've tried to use both a W7 DVD and also a bootable USB drive (and yes, connected in the USB 2.0 port and not USB 3.0 ) - but I always get to the same point where I have to select drivers.

Please also notice that the BIOS doesn't allow me to make any modifications except for some minor ones (like select boot priority, or enable USB 3.0), as the rest of the MAIN features are greyed out .

Can anyone please help me with this issue?


A:HP Pavilion 15-n252sq - Can not install Windows over Free Dos

You may have to use a program Like KillDisk to reformat the drive. Then try installing your Win 7 DVD.
Relevancy 27.52%

My HP Pavilion G has been into geek squad twice now and each time it has come home and worked seemingly okay for about a week and I have problems with it again In the beginning of it all whatever has infected my computer corrupted USB drives I ended up USB ports trouble me giving putting the files back on the computer as it had some important school documents If USB ports giving me trouble it helps the USB drives were lexars I have also been experiencing problems with a portable mouse Logitech where it will simply not USB ports giving me trouble work When I try and shut it down in the start menu It will fail and give me a blue screen with quot USB BUGCODE DRIVER quot scrawled near the top in all caps It will also when on have lines move up and down it Like I said before geek squad has looked at this twice and hasn t solved the problem to a full extent Since it happened during the time that it quit working for the last time I downloaded quot Monaco quot on the steam store on a whim because it looked fun and it was free When I gave it access to my hard drive and launched it it froze up and I had to use Ctrl Alt Delete to get the screen to go back to being normal This is when the mouse quit working and no buttons on the keyboard worked I shut it off using the power button and when I started it the mouse didn t work This confused me because I thought the Steam store was secure I have also tried to reset it to the day before it went foobar using the system reset but it gives me the same USB BUGCODE blue screen each time I try because it has to shut down without the power button even in safe mode the same thing happens I really need my mouse to work for the games that I play having to use the touch pad for games like Skyrim is the most irritating thing I ve ever experienced I also need the USB drives to work for school projects and papers I haven t seen anything helpful on the internet so far and I really don t want to pay for another useless visit to geek squad Thank you for your time nbsp

A:USB ports giving me trouble

Your drivers are corrupt. You can uninstall them and let windows reinstall them. This may fix the problem . But if the usb ports are bad. You will get the same problem back. You can also try a restore point to when the computer or laptop usb ports were working fine. I hope this helps.
Relevancy 27.09%

My current system was built in May of 2012 and has been rock solid until like now.

I have had 4 out of 6 USB ports fail on me at once. I can't scan, can't print and the only two that are working I have both my mouse and keyboard in them because I had to transfer them yesterday the ones I had them connected to for almost 2 years. My printer was working fine yesterday and then that port failed today. I have tried booting and rebooting to no avail.

The motherboard is a Gigabyte Z77X-UD3H. If anyone can recommend to me a good solid Z77 board I'd appreciate it because if the last two ports go I won't be able to use my keyboard or mouse and then I'll have some real grief to deal with.

Any ideas would be most appreciated.


Relevancy 28.38%

Was just thinking, how many USB ports do you guys use? I would imagine more than the average user as I suspect that members of a technology forum wouldn't use the same as the average user. If possible I would like to know what you use the ports for in the comments, personally I use 6, one for my mouse, one for my webcam, one for my speakers, one for keyboard's USB hub (which I never use), one for my wireless xbox controller receiver for PC and one for my iPod cable. My keyboard is PS/2 for the actual keyboard part, if you were wondering. Thanks!

A:How many USB ports do you use?

Mouse, keyboard, webcam, XBox 360 controller, Logitech G27, WooAudio WA7, sometimes I swap out portable hard drives and thumb drives and occasionally plug in a custom joystick for playing SSF4AE... and that's just for my gaming rig.
Relevancy 27.09%

I have no idea why this happened, after the update none of the ports on my computer work after booting into windows. bios was updated before this and all was fine. checked in bios if ports were enabled. still no joy. help!!!
Relevancy 25.8%

Hello Guys

I recently changed my motherborad , and I have a new Graphics card and new processeur ,
Graphics Card :
-AMD M880G with ATI Mobility Radeon HD 4250
-AMD Radeon HD 6470M
I used every way to update the graphics card , sometimes it appears the blue screen , and then the drivers never up to date , help me as soon please

Computer : HP pavilion g6 Notebook PC
System : Windows 7 64 bits

this is an image from my computer

A:HP pavilion g6 Notebook PC

Have you worked on or repaired many laptops? English is not your first language?
Relevancy 27.52%

I recently change my motherboard. since then front usb ports are not working. I searched them in device manager but there are only 4 usb root hub are desplaying which are of backside. front side ports are not showing in device manager. I open cabinate and desconnect and reconnect cable into front usb ports. but its still not working. is there wrong connection on motherboard ? plz help.

A:Front usb ports not appearing

Check the manual again against how you have plugged the front panel ports into the header, the old motherboard and the new one are most likely not the same as how the front panel ports on the old one are.
Relevancy 25.37%

Hi I was wondering what form factor type this Pc has BTX or ATX, if im wrong in saying this please point me in the right direction, I require at least a 500W PSU and I am only purchasing in australia, Maybe from china if on ebay

Current specs:
8gb RAM
1gb VRAM (Nvidia Geforce 520)
Intel i7 2600 - Quad core
1.06TB Storage

A:HP Pavilion P6-2055a PSU Upgrade

According the the Manufacturer details, you have a standard ATX PSU so as long as you stick with that, you can fit pretty much any inside your machine. It does look like the 300Watt version inside the machine is a bit short compared to normal PSU's, but as long as you still have space, it should fit just fine.
Relevancy 27.09%

I was setting up a DVR to be accessed from outside a restaurants network They purchased a static IP address I ve set these up a half dozen times before usually with no-ip org this was my first time that a client ports All connection IP Static refuse connections - actually bought a static line so I thought it would be easier So I setup Static IP connection - All ports refuse connections my router an old wrt Linksys with all the correct static IP and DNS Static IP connection - All ports refuse connections info Setup port forwarding and tried to connect from my phone s internet connection using a laptop No luck So I set the laptop as the port forward address and ran a portscan from a website and checked the port individually from canyouseeme org Both said quot Refused connection Static IP connection - All ports refuse connections quot or a derivation there-of The scan showed this for all ports I disabled the firewall and set the laptop as DMZ and still got this message on every port I checked I then plugged the laptop directly to the modem SURFBOARD SBG and entered the static IP info into the network adapter settings Internet connection worked fine but still kept getting quot refused connection quot I then spent an hour on the phone with Brighthouse Networks as they tested everything on their end and inside the modem which is actually a modem router but they wouldn t give me the login and pass to check it myself They said the problem must be on my end and that they do not block ports except and or something like that Connected directly to the modem and still getting this problem even after several reset attempts on the modem I can t think of what to do next I even set it to pickup the network automatically as the modem router has a dhcp server in it While it could still connect to the internet all ports still refused connections I m stumped Any help would be appreciated Thanks nbsp

A:Static IP connection - All ports refuse connections

Figured it out. As always when it doesn't make sense it's because theres' more than one thing wrong. The router's port forwarding wasn't working, and I had forgotten to disable to laptops firewall and I guess windows 8 has a more sensitive firewall than 7. So plugged in the DVR directly with the static IP info typed in and worked like a charm.
Relevancy 27.09%

I recently got new Intel SSD series 330 60gb in addition to my standard 1tb Samsung HDD. So I set RAID mode from IDE to AHCI in BIOS (mobo MSI X85 pro-e). Now some of SATA ports (port 3 and 5) don't recognize my HDD or CD/DVD being connected but I still can use them in windows while other ports display them normally in BIOS. Also when I switch back to IDE mode, ports 3 and 5 display hardware in BIOS.
Relevancy 28.81%

I got my new Asus board yesterday, but there is a switch on it called GPU Boost, should I enable or disable it?

It was enabled by default but I turned it off.


A:Asus GPU Boost - Enable or Disable?

Enable it if you play games and dont have a dedicated GPU.
Relevancy 27.09%

Hi,I when I connect the usb nano receiver of my mouse in one of the front ports of my cabinet it works fine,but when I put the nano receiver in one of the back ports ,the mouse lags!
Any solution?
Thanks in advance
Relevancy 27.09%

Hi Friends ... I have this laptop that has been given to me by my company and the USB ports have been blocked in manner such that I can copy stuff from my USB drive on to the machine but cannot copy in the reverse direction, ie. from the hard drive to the USB. Obviously it is to safeguard against theft of data. However, I do not deal with any confidential data and like to back up things every few days. Please tell me a shortcut to unlock my USB entirely even though I do not have administrator rights on the machine.

A:How to unlock USB ports without admin password?

Sorry, we will not assist in circumventing such security features, especially when the machine belongs to someone else.
Relevancy 25.37%

Hi all My parents have an HP Pavilion entertainment laptop that frankly didn t run well when it was new but is really struggling to open programs now I am thinking of putting in an SSD as a boot drive and moving the HDD into the optical bay and upgrading the RAM to the max of Also possibly Pavilion 1100? HP dv6 Should upgrade I upgrading to Windows I think would confuse them My dad does a lot of photo editing using Lightroom Other than that it s basic word excel amp Internet browsing only Is it worth it for me to put a few hundred dollars I figure about into the laptop or should they look for a new desktop instead It would be worth it to me to extend the life of the laptop with a view to buying new down the road Here are the current specs HP Pavilion dv t- GB RAM Intel Core Duo T Should I upgrade HP Pavilion dv6 1100? Ghz bit Vista ATI Mobility Radeon HD Thank you nbsp

A:Should I upgrade HP Pavilion dv6 1100?

I would keep the HDD, clean install Windows 7 (check out this article for help:, it is for Windows 8, but the same applies to Win 7), and upgrade the RAM. I wouldnt add an SSD because your CPU is pretty old and the SSD will be bottlenecked by it and therefore it would not help. I recommend Clean installing Windows over the SSD because clean installing gives the "New" PC feel to old hardware like an SSD does to semi-new PCs. The RAM will also make a huge difference. After you clean install Windows, report back and ill tell you what drivers you need (you only really need a display driver).

I think it is a good choice to wait for a new laptop down the road. This upgrade will gain you a few years, but dont expect to game on it. Keep in mind, clean installing Windows will delete all of your data! So use these sites to help assist you in your back up adventure: (For Windows 7, but Vista is basically the same I think).
I recommend this less since it transfers old settings (which can be causing the performance hit you are experiencing) to the new install:

Windows 7 will set you back a hundred bucks: 7
But it is worth the upgrade. If you are a student you can sometimes get discounts thru Microsoft but since they want to separate themselves from Win7, they may not offer this anymore. But they still do for Win8, but it is hard to find an institutions other than universities.

Use this tool to find out what RAM supports your system: (tell me if the link doesnt work since I am running OS X now and it automatically sends me to the download for OS X, so I cut off some of the URL)

Finally, install the Catalyst Software Suite after you have clean installed Windows 7 and added the RAM:

Keep in Mind: You should install the newest BIOS revision for your laptop before upgrading to Win 7 to avoid errors:

Don't be afraid to ask questions . Sorry if this essay is intimidating .
Relevancy 29.24%

Dear All!
I want to enable and disable internet without using enable or disable network in lan network, I want program on and off? have any program?
thank with best regards

A:Enable and disable Internet

What? Is disabling the adaptor too hard? I'm sure there's something for this, but uh... really..?

Or do you want to disable Internet access and still have LAN access?
Relevancy 27.52%

I have a problem with my desktop PC The USB ports are not working so I can t use my keyboard or mouse I m not sure if it has any connection with this but today I tried installing a SSD to my system with no luck While doing that I set the BIOS to AHCI as I read that would be the most optimal Well I kept getting errors trying to install Win to the SSD so I decided to save it for a later time Then I turned off my PC unplugged the SSD and plugged my HDD back in On boot up I entered BIOS and set settings to default After this my USB ports stopped working I have tried turning off my system unplugging the powercord and the CMOS battery for at least minutes with no luck I have also tried plugging my keyboard into every single USB port my PC has I can t even enter BIOS or press F to enter safe mode now Any suggestions stopped USB ports working I m using WinXP and my motherboard is a Gigabyte GA- A-UD nbsp USB ports stopped working

A:USB ports stopped working

Borrow or purchase a ps2 kb. Enter BIOS and enable USB KB/Mouse. I'm not sure it is called exactly that, but it is something similar that you will be able to find. I too have a Gigabyte motherboard (older than yours even) and have had problems with it liking USB kb inputs until I explicitly set that in the BIOS. What is weird is sometimes USB will work if that isn't set, or sometimes it will half-*** work, as in I could get into the BIOS or force the boot selection menu, but then the kb wouldn't work.

So bottom line is, I know what you are describing, but I don't know of a good fix, outside of just acquiring a ps2 kb which will get you out of this situation 100% of the time.
Relevancy 27.95%

I don't think there is an easy answer to this problem, its a Dell desktop and after a power cut non of the usb ports are working therefore my keyboard and mouse aren't working either, There are no ps/2 ports to use instead, it was booting into windows but with all the repeated turning off it now boots to a screen giving me a choice of boot up modes neither of which I can choose therefore it just sits there and goes no further. I fitted a PCI card with 4 x usb ports on it but of course it can't load the software for that therefore it won't recognise the keyboard/mouse. its a bit of a catch 22 situation.
Has anyone any suggestions, other than changing the mobo as that's not going to be cheap as its a Dell?

A:USB ports not working

Can you try infrared or bluetooth devices?
Relevancy 27.52%

Lately I have been having some New issues modem ports with / problems with people connecting to some listen servers that I try to host I tried an open port check tool and these ports are coming back as closed although I have opened them in my router and all settings are correct I then got to thinking that not too long ago New modem / issues with ports my ISP replaced my old modem basic single WAN port modem with a large Arris TG modem which has a WAN port along with LAN ports I found out this thing had an IP address for it so I logged into it couldn t do this with my old modem and discovered this modem has all the settings that my Linksys WRT GL router has DHCP Wireless New modem / issues with ports capabilities WAN LAN setup Firewall etc My question is could this new modem be the cause of my problems I noticed that it New modem / issues with ports has DHCP enabled along with the firewall which are both also enabled on my Linksys router Any insight on this would be great as I ve been trying to figure this out the past couple days and have come up dry Edit After finding an online manual for this Arris residential gateway it turns out that port forwarding is referred to as quot Virtual server quot for this device I tried to forward the port I m having issues with but when I go to apply the settings it says invalid IP address even though I am typing in the correct local IP address Edit While tinkering around with this thing it dawned on me that I should be setting the Arris gateway to bridge mode but after setting it to bridge mode and restarting the gateway like it suggests I do my internet connection goes out RT GLWRT GL WRT GL nbsp

A:New modem / issues with ports

Set your Arris TG862 modem/router to previous mode (routing), keep DHCP server enabled. Disable DHCP server and firewall on your router WRT54GL. Connect the modem(Arris TG862) and router(WRT54GL) with their LAN ports.

In the DHCP settings of your modem/router you should see what LAN IP address range it is using, forward ports accordingly(Virtual server).
Relevancy 27.09%

There is some problem with my font USB ports. All was fine until yesterday when they stopped working. I havent made any hardware change. Installed windows 8 but that was last week.

I connect my Logitech Gamepad, the LED switches on but it doesnt show up in the control panel, works when connected to the rear USB port.

Please help..

A:Front USB ports suddenly stopped working

You might have to open up your case, trace back the cable, and re-plug it. It could be detached, or the USB controller on the front ports could be fried somehow too.
Relevancy 27.52%

Hope someone can answer this: I have a XFX Radeon HD 6670 1GB, DDR graphics card with 2 ports (as noted in the subject.) I am able to get one monitor to display from the DVI-D port, but have tried 3 different monitors on the DVI-I port and none would identify or work. I bought an AVG to DVI-I cable and tried that, to no avail. I am really believing that the left port (DVI-I) is bad and I should get a new card. I do not know of any other way to 'test' it. I wanted a simple dual monitor set-up. I appreciate any help you can offer.

A:SL-DVI-I and DL-DVI-D ports graphics card

Might be an obvious question but have you enabled the second monitor in Catalyst Control Centre? Also what resolutions are the monitors?
Relevancy 27.95%

Someone told me that the front USB ports on Windows 7 are wired differently than the rear USB ports. Is this true? Because I have my doubts.

A:Windows USB ports

The front ports can be different to the rear ports (e.g. 2.0 at the rear, 3.0 at the front), it's a hardware/BIOS thing, independent of the OS.
Relevancy 24.94%

Hello Community My name is Andrew Fratello and I work for a computer repair shop in Florida I m new in the field at a professional level but I ve been tinkering with computers since I was a little kid I m new to this site as well and I hope it to bring me some good help with some of my future work if I cant trouble shoot it myself The HP Pavilion Dv - dx Laptop came into the shop today The problem with the PC is that it doesn t have any display HP laptop Dv6-3025dx issue Pavilion display at all You can turn it on and it will stay on just fine but even when I plug in a VGA cord connected to one of our shop HP Pavilion Dv6-3025dx laptop display issue monitors the screen still isn t displaying If it was a LCD screen issue I m sure I would have been getting video feed from the external monitor which leads me to believe that the motherboard is malfunctioning I want to double check here with you guys and get a couple opinions before I let the guy know what the problem is and what needs replacing The last thing I want to do is have the gentleman buy a new part that is worth a couple hundred and then it turning out to not have been the problem at all Please get back to me ASAP Thanks and looking forward to your responses nbsp

A:HP Pavilion Dv6-3025dx laptop display issue

My guess would be the video chip. If you are not getting it on either screen.
Relevancy 27.52%

I just bought a Corsair M gaming mouse I installed both the updated firmware and the drivers for the ports? USB dead Corsair = M60 mouse and played a few rounds of Medal of Honor Warfigher on multiplayer The mouse performed pretty good I played for a good three hours without a problem I then shut Corsair M60 = dead USB ports? down to attend to something away from my PC When I rebooted my PC two hours later the USB ports in the rear hub of my setup -- where the M was plugged -- were no longer working The mouse was unresponsive I did a hard shut Corsair M60 = dead USB ports? down plugged the mouse into a USB port in the front panel then boot my PC into Windows The mouse worked but the ports in rear USB hub remained unresponsive So I did the quot unplug the power cord wait five minutes then reboot quot band aid solution which -- as expected -- worked Windows installed its generic mouse drivers I m using those now I ve uninstalled the M driver for now but have kept the firmware update intact I would really like to be able to use the driver s features But I m worried that I might run into the same issue again and be forced into another hard reset What could have caused the problem I know it s a lot to ask but I d like to first hear your advice and inputs and perhaps learn more about this issue before I try re-installing the Corsair drivers I ve got an Asus P X Pro motherboard As mentioned the M is plugged into a rear USB port Here are the specs for the mouse As always your help and advice will be greatly appreciated nbsp

A:Corsair M60 = dead USB ports?

Try rolling back that driver update
Relevancy 25.37%

I have a hp pavillion d4000 and I want to upgrade the processor. It has a 3.2 ghz amd but when I go to hp's website to see what the max processor I can put in it it hasl only a 2.4 ghz processor listed in the replacement parts list.

A:Processor upgrade in HP Pavilion D4000

Whats the exact model number?
Relevancy 25.37%

Hey guys so its been like a week now of me trying to get audio on my computer, Iv download, uninstall my audio drivers to my computer nothing has worked.
I had 1 Logitech headset that would only work for my computer, Any new headsets or speakers I bought wouldn't work.
When I go to my control panel> hardware and sound> device manager it says I have,Real teck higher definition installed.
The Small volume icon in the bottom right corner has an x in it, And when I open volume mixer,
It says no audio devices installed.
I already checked Bios.
Please someone help me before I go mad!
Appreciate it.
As well when I go into Dxdiag, It says error problem getting extra sound info

This is my dxdiag Shot

Also in my Msinfo32, When I clicked problem devices, Nothing showed up

A:Going crazy. HP Pavilion a6345f PC with no audio

Have you tried uninstalling all audio drivers and rebooting, then let windows install it's generic audio driver and see if there's sound? Sometimes another program or driver will corrupt the audio driver and requires un-installing the hardware (in Device Manager) and re-booting, then see if Windows finds a driver for it. I looked on Asus website for the latest audio drivers, but for the 4 versions of this motherboard, none have driver support for Vista or newer, only up to XP. Why are you using Vista, anyway? That's arguably the worst OS in existence, mostly because of driver problems. Still, Vista should have generic drivers for on board audio in it's driver database or you could try using the XP drivers from Asus . If that doesn't work you may have a fried sound card. I've seen this problem a few times on older systems, either all drivers and everything looks good but still no sound, or drivers won't install because this hardware has a problem. In these cases I was forced to assume the output side was fried (after hours of troubleshooting and trying 3rd party drivers) and just install a cheap ($20) audio card (which probably sounds better than the on board audio anyway). I see you have PCI and PCIe slots so any card will fit. Here's a decent card for cheap;
Good luck!
Relevancy 25.8%


So I'm going to upgrade the default HDD on my laptop HP Pavilion DV6 2153.eo. There are two things that I'm not so sure of tho.

1. Can I get a SATA/III SSD HDD and throw it in the laptop <- are the SATA/III SSD HDDs backward compatible with/to SATA/II

2. What HDD should I get, it should at least be something like 180Gb but then also the price shouldn't be sky high...and then ofc I should also be able to get it here in north Europe

P.S. I'm also going to get more there anything else that can be upgraded..?

A:Upgrading HDD on a HP Pavilion DV6

...a bump here maybe...gonna need to order the parts soon so O_o
Relevancy 27.09%

Okay so I have the Corsair Force GT Series 120GB SSD. Its port's are Sata 3 and well my motherboard is a MSI Pro-E long story short it does not have a sata 3 port. So my question is there anything out there I can buy that does have a sata 3 port like something that will hook on the PCI slot's or something. I basically dont wanna have to buy a new mother board but I still wanna get the amazing speeds because right now im getting half its peformance anyways please write back soon. If you give me a link to a product I prefer and my max budget is $50.​

A:Expansion card with SATA III ports for SSD?

You will need a free PCI-E slot. But this should get the job done.

I do not know much about the brand. But it does have 5 Eggs on Newegg.
Relevancy 27.52%


Our family rents apartments here where I live. And there's a router in my room which guests use too. Since we don't have awesome internet connection, it really annoys me when guests download something via Wi-Fi. So my question is, Is it possible to block ports only for Wi-Fi users, but leave all ports open for cable users?

I googled but did not find anything related.. hope to get an answer here.

Big thanks !

A:Router: Blocking ports only on Wi-Fi?

This might help:
Relevancy 29.24%

My situation is i have a 15.6 inch laptop with a screen resolution of 1366x768. Earlier i hooked up my old HP vf15 (its a 4:3 aspect ratio) which has a resolution of 1024x768. I tried setting up eyefinity, but it streched out my laptop display and it looked normal on the other monitor (this is on the desktop screen only, where you can see windows and stuff). I wanted to know if there was a way to enable eyefinity during games only. Or if theres anyway to prevent my laptops screen from stretching. Thanks in advance!
Relevancy 28.81%

My girl just got herself a A - M notebook It comes with AMD Radeon HD g AMD Radeon HD m Dual Graphics I m having a hard time understanding how they work Do I have to enable the crossfire somewhere or they re already crossfired out of enable to how dual - graphics Crossfire? APU's the box Is there any kind APU's dual graphics - how to enable Crossfire? of setting where I would decide which gpu is primary secondary or that s just not up to me to decide According to msi afterburner during a game session Trine the only gpu being used is the g while the m just sits there doing nothing Last question and perhaps the most important when downloading drivers on AMD s website http www amd com us products technologies amd-catalyst pages catalyst aspx Under quot find a driver quot tab after choosing quot notebook graphics quot on the first field should I select quot A-series APU quot or quot HD Radeon Series quot on the second field Guys I m completely lost here Any light on the subject would be most welcome In the meanwhile I ll try to get her more demanding games and see if we can wake up the m Thanks in advance nbsp

A:APU's dual graphics - how to enable Crossfire?

did you install the newest Catalyst driver or you just downloaded it? Do the "automatically detect and install"
Relevancy 25.37%

I am sorry to bother you with something simple but I can't seem to find the right info. I have an HP Pavilion 533W that is running a 1.79GHZ processor, I have not removed it, only looked for the specs..

I have an Intel Celeron D 2.53 GHZ /256/533 that I bought new for a similar model but the motherboard ended up bad. I would like to upgrade with this extra processor I have but I can't find enough info on these to find out if it will work. I am almost down to just having to uninstall it and compare the cpu's.

I was hoping that someone would know the answer since this is not my strong point in the computer business. Thanks in advance for any help.

A:Want to upgrade CPU on a Pavilion 533W

If the Celeron fits in the CPU socket, try it...
Relevancy 27.95%

i want to disable some of the usb ports on each computer on my network,

since they(users) use flash drive and such on them i keep on have to clean them or even format over.....

so i want to disable the ports but the keyboard and mouse of each are usb so how can i........

A:Disable USB ports

Go to "Device Manager" and disable the usb hubs you don't want being used. You might have to switch to PS/2 Keyboards and Mice. If you are comfortable with changing your system registry you can try this.
Read about halfway down.
Relevancy 24.94%

Hi Guys Got given a HP Pavilion DV from a friend who said it was busted i ve replaced the harddrive and ram and have got it working Last night i installed a lite version of XP with sp built in It installed perfectly in under minutes However i cannot get the wireless to work I downloaded and dv4000 on XPLite (wireless issues) Pavilion SP3 installed the drivers from the HP website and this allowed me to turn the wireless on and i get the little bubble in the bottom left corner saying there are wireless networks in range however if i click the balloon and it searches for wireless it cannot find any even though the router is right next to it After about a hour of playing around trying to get it working i downloaded another driver pack from the HP XPLite SP3 on Pavilion dv4000 (wireless issues) website and this included a wireless application i think it was HP Wireless assistant but i can confirm that later today With the application running i can find wireless connections but the actual wiress adapter still cannot find any When using the software to connect to the wireless it allows me to enter the wpa key and the windows connection says its a bridge network but it never makes it passed authencation Obviously the drivers are still wrong Can anyone point me in the right direction Cheers Nick nbsp

A:XPLite SP3 on Pavilion dv4000 (wireless issues)

nickt1988 said:

When using the software to connect to the wireless it allows me to enter the wpa key and the windows connection says its a bridge network but it never makes it passed authencation.Click to expand...

Some wireless configuration application disables the windows built-in wireless configuration manager so as not to cause any conflicts. Using the HP wireless assistant you can successfully connect to the network? Windows built-in cant?
Relevancy 24.94%

I am hoping one of you fine people can help me to find a replacement motherboard for my HP Pavilion p p I have gone through the Pavilion Replacement HP p6226p for motherboard needed whole troubleshooting routine -- all peripherals RAM replaced with known-good power supply amp CPU and still can not get into the BIOS setup or boot Replacement motherboard needed for HP Pavilion p6226p past the HP splash screen I m down to replacing the motherboard now This computer currently has Motherboard -- M N -LA Viola CPU -- AMD Athlon II x Quad Core Graphics -- NVIDIA GeForce Integrated I m fine with a replacement motherboard with at least equivalent graphics as I do occasionally game with my boyfriend League of Legends Magicka running on lowest settings is fine with me I Replacement motherboard needed for HP Pavilion p6226p m in the market for a new computer but would like to keep this one limping along for another months or so if all it will cost me is a motherboard I have a Frys amp Microcenter nearby located in Houston and would like to go pick up a shiny new motherboard ASAP so if you could point me to one on their site it would be greatly appreciated Thank you for your time nbsp

A:Replacement motherboard needed for HP Pavilion p6226p

Check here and make sure that you have a PayPal account:
Relevancy 26.66%

I have a satellite pro l300 - only 1 usb port is working the others have been physically damaged. I was wondering I could put a card into the express card slot ..I was thinking one of these

but I am confused, with pcima, express slot converters......would the above work ? - laptop is running vista.

A:Adding USB ports to ExpressCard slot on Toshiba Satellite Pro

Yes this adapter should work fine
Relevancy 25.37%

I have a HP Pavilion DV7 - 4285dx which comes with a Multi DVD +/- DL blah blah whatever drive in it. (no bluray)

I would like to know if I could find a replacement bluray drive for this laptop.

Does anyone know where I could find this or if this is even possible?

I would assume its possible since that I had bought a bluray drive for my PC, and it works.

A:Pavilion DV7 Blu-ray drive replacement

After some more research I found a replacement part that should work.

For anyone looking for similar answers, the part number is 605417-001 CT21L

Just do a google search with part of that number or all to help find the correct parts.

Thanks everyone....
Relevancy 27.52%

I need help getting my cd dvd drives to work I can burn a cd but neither drive will read a cd dvd Ive ports not drives CD/DVD working and USB tried the following with no luck Uninstall the drive through Device CD/DVD drives and USB ports not working Manager Restart computer The drive will be automatically reinstalled or http support microsoft com kb Restart computer or Download and run Restore Missing CD Drive patch Double click on cdgone zip to unzip it Right click on cdgone reg click Merge Accept registry merge Restart computer or Go to Device Manager click a quot quot sign CD/DVD drives and USB ports not working next to IDE ATA ATAPI Controllers You ll see two items - ATA Channel or Primary Channel - ATA Channel or Secondary Channel Right click on each of them and click Uninstall Confirm Restart Windows They ll be automatically reinstalled When I try uninstalling the drives through device manager my computer freezes up completely and I have to force shutdown any ideas all help would me much appreciated oh and by the way Im running xp home and I have SP installed thanks nbsp

A:CD/DVD drives and USB ports not working

no? ok. thought I would get a response. I THOUGHT WRONG! lol
Relevancy 25.37%

I hav a computer that has its intergrated video card which stopped working because of the video card which is attached to the mother board .It is one of the newer post 2007 compact desktop computer with a flat screen monitor but the challenge is that the good friend of the family got an extension video card but it is too big to fit in that machine.How can I get a video card that will fit the above machine abovein which is a newer late 2000's -today.The operating system is vista.

A:HP Pavilion Slimline PC s7727-cb

This slimline computer probably has a PCI express 2 video slot on the motherboard. You will have to buy a small form factor or low-profile video card for the computer. They are available. Here is an example:

Notice the small adapter plate in the pictures. You may have to install it on the video card before you can install it into the computer. It is not difficult to do
Relevancy 24.94%

recently purchased the above base unit and TV. i can play Xbox on it and use portable speakers which work fine. However when i switch to PC mode there is no sound and the speakers are not recognised. Is this a manufacturers fault or something else? Please reply asap.

A:No sound from HP Pavilion G5460uk/ Samsung B2230H

What type of cable are you using to connect the PC to the TV?
Relevancy 27.95%

Hello everybody.i have a serious problem here.when i start my Laptop(hp pavillion g6 1055ex) i plug in the usb device(external HDD or usb controllers or Flash memories), it really works good and i hear a sound of plugin or plugout sound in my windows 7 but after an hour when i plug in my any of usb devices,they are not appear anywere.and even i cant here the plug in and plug out sound but the light of the device is working!!!!!!!
Laptop model:Hp pavillion G6 1055ex
i purchase this laptop 2 months ago and it is brand new. plz help!

A:USB ports problem

Isn't this still under warranty? Can you take it in for warranty work?
Relevancy 24.94%

Im not very good with computers, I only really know how to turn it on and type.

I got a HP Pavilion dv4 1465dx notebook last year. The RAM is 4.00 GB, and the Harddrive is 194GB free of 286 GB. It uses Windows Vista.

My sister has all of Sims2 games and expansions.

I always try and diskcleanup and get rid of unneccessary things when I can, but ive always wanted to play games with my friends but couldnt since I got it and BEFORE my sis put sims on it. Often I feel like my older desktop is faster than this.

I was wondering if there was anything I can do? When i googled many people said 4.00 GB RAM was enough to play games so im not really sure why its so slow.


A:Making HP Pavilion dv4 1465dx notebook faster?

Download and run free Surperantispyware and tell us what it finds. What antivirus program is installed?
Relevancy 25.37%

Hey guys,
I need a cheap laptop that shouldn't be used for much more than MS Office and casual gaming, for games like Dawn of War S1, Dawn of War S2, World of Warcraft and other such games and RTSs, could anyone check it out for me? I've had a look but i'd like more opinions.

Link ---> PC World ---> HP Pavilion G6-1009ea - Red

Dual Core Processer 2.3GHz
ATI Mobility Radeon HD 4250

A:Can you review this HP Pavilion G6-1009ea

We could help you out more effectively if you posted a link to the machine.
Relevancy 25.37%

I have an old HP Pavilion 513W Desktop - System # P9857A, Serial # MX234A4770, with a 845GL Chipset and a 478 Socket I think ?Where can I get a replacement Motherboard NEW or Used?

A:Where can I find a new or used HP Pavilion 513W motherboard?
Relevancy 24.94%

Hi i am hard capacity drive for Pavilion Max zd7000? trying to mend a friends laptop the HD has packed in and i need to replace it The laptop is a HP Max hard drive capacity for Pavilion zd7000? Pavilion zd the hd is a toshiba gig lol and i am just wondering what the max hd is i Max hard drive capacity for Pavilion zd7000? can put in it I have seen these below but am unsure if it would be ok to install i have no knowledge of laptop requirements like PSU demands etc so i need your help in getting the biggest HD affordable for this unit Here s the one s i have looked at based on dimentions http www ebuyer com product http www ebuyer com product The original one is a Toshiba MK GAX and i think looking on the net its an IDE its mm depth the first one above is mm and the other mm so unsure if the first would fit being mm thinner Hope you can point me in the right direction Kindest regards Lee nbsp

A:Max hard drive capacity for Pavilion zd7000?

Ayup Lee....again

Looks like you can go with any 60GB, 80GB, 100GB, or 120GB (Non SATA) Hard drive. That HD in your first link is a 9.5mm....The 9.4 is probably a typo.

Here's the website i looked up
Relevancy 26.23%

Hello all First post so bear with me Thanks Here s the situation I m replacing the internals on a brand new Toshiba Satellite Pro L after it was doused in sweet tea I was able to procure a new mobo and USB ports No power after replacing USB L630 to Satellite and Toshiba mobo Card reader board for about half the price of the laptop and the cleaning replacement went smoothly Here s the rub though -Brand new Mobo -Brand new card reader USB board -Brand new connectors Computer accepts power and shows powered on Even boots However as soon as the USB board is plugged in the entire rig looses power until it is unplugged and reset with the power button Odder still even though the old board acts a bit odd keeps trying to turn the computer on as soon as it s plugged in it behaves the same way Old and new USB boards both cause the board to lose power I ve done full electrical testing and even though the power circuits show full power at the DC in jack the board drops to half power and then loses it completely as soon as either USB board is plugged Both boards behave the same even when nothing else is connected except for the USB board Completely lost at this point Any help would be greatly appreciated nbsp

A:No power to Toshiba Satellite L630 after replacing mobo and USB ports

The replacement motherboard is probably bad. Have I ever bought bad motherboards? YES! Both for laptops and desktops...
Relevancy 24.94%

My HP Pavilion dv - dx Entertainment Notebook PC goes to blank display frequently during working on the same It is having Vista with dv4-1465dx entertainment Problems HP notebook Pavilion Home Premium Edition installed The only indication at that time is the blinking of the POWER ON button When we press space bar Problems with HP Pavilion dv4-1465dx entertainment notebook or Enter key it tries to load to the original condition and after getting the previous screen loaded for Problems with HP Pavilion dv4-1465dx entertainment notebook few seconds it Problems with HP Pavilion dv4-1465dx entertainment notebook goes back to the blank state with POWER ON button blinking If I put some light from torch or something on the display sometimes I can see the screen loaded In such cases of sleep activity the CTRL ALT DEL won t work pressing continuously on the POWER ON button won t work in order to shutdown and I had to remove the battery to start the Notebook again So after searching the internet for the same kind of issues I re-installed my OS from Vista to Windows bit and I installed some of the drivers from the HP Site corresponding to my Note Book HP Pavilion dv - dx Entertainment Notebook PC and Windows Bit OS After that also it is going to the blank state but returns immediately by showing a message as quot Display driver igfx stopped responding and has successfully recovered quot So when I checked this in HP site as as per that I updated the Intel Graphics driver for the chip set corresponding to my Note Book and Windows Bit OS In that case also the volume control display on the screen was not showing anything while increasing decreasing the volume but it is working as normal without any display Again based on the search in HP Site I reinstalled my BIOS from HP F to Insyde Flash F After that when I press quot F quot while booting the machine I m not getting the options such as Safe Mode Safe Mode with Command Prompt Restore Last known Good configuration etc I m getting a red screen with some other options containing some different technical terms Is it because of the wrong BIOS updating or something else If it is related to BIOS can I downgrade from F to F Or is there any other way to get the above mentioned options such as quot Safe Mode Safe Mode with Command Prompt Restore Last known Good configuration etc quot same as pressing the F button Expecting the support in this matter nbsp

A:Problems with HP Pavilion dv4-1465dx entertainment notebook

How old is this computer? The power supply may be on it's way out...
Relevancy 24.94%

i have an hp notebook (see title) running w7 sp1, that is only 13 days old. just yesterday it started making a very annoying sound. it just makes the same 2 tone sound really fast. when you click on the sound icon in the task bar the meter reads 100%. nothing has been installed recently before this started. the sound dialog box under recording shows the mic meter steady around 50% and the stereo mix meter at 100%. it's almost like constant feed back but i don't think that's it. i talked to hp and they said to upgrade my bios but the ftp link they sent me to doesn't exist. anxious to provide any other information needed. thx

A:HP Pavilion g7 1070us sounds like motor boat

It was the driver...uninstalled and reinstalled. Fixed.
Relevancy 27.09%

Toshiba A -s Vista Home Premium SP Bit I have USB ports available on the left and on the right I can t seem to get any of them to work any longer When I plug anything in on the two on the left nothing not a thing happens When I plug things in on the right it recognizes it and it installs but tells me the device is unknown No matter the device it s always unknown devices All Unknown install ports USB as in in either port Until yesterday when I removed some upper filters and lower filters associated the GearA it constantly was giving me that quot plunking quot sound like something had been plugged into a USB port and it was quot not recognized quot That was driving me nuts as I could not get it to stop I have been reading on here for a couple of days and gone through all the troubleshooting Cleaned drivers with Driveclean exe in folder system Uninstalled the All devices in USB ports install as Unknown devices in device manager as instructed Ran SIV All devices in USB ports install as Unknown - Service Information Viewer Updated chipsets and drivers Gone thru instructions to remove upper and lower filters with Regjump however there are All devices in USB ports install as Unknown other upper filters and lower filters associated with other stuff in the Registry Read thru instructions and ran serviwin I ve even been inside the computer to make sure no wires were loose When checking USBSTOR with serviwin here is what I get USBSTOR USB Mass Storage Driver Stopped Manual Normal USB Mass Storage Class Driver lh sp rtm - Microsoft Corporation Microsoft Windows Operating System C Windows system DRIVERS USBSTOR SYS Error The service cannot be started either because it is disabled or because it has no enabled devices associated with it AM system DRIVERS USBSTOR SYS I ve tried to quot start quot USBSTOR but it won t let me At this point I m here with laptops and USB ports and can t get one port to work I have an HP where the ports have stopped working too but I can t only deal with one at a time lol I m in need of some serious get down to business help and unafraid Thanks so much nbsp

A:All devices in USB ports install as Unknown

It's another long shot but again, is easy to do, so give it a try. You have the same symptoms so try the same trick as in this thread Driver failure, unknown devices in USB controller. It worked there. Maybe for you too> <fingers crossed>

LookinAround said:

I've seen this trick work on only just a couple occasions but is easy so is also worth a try for your symptoms

Shut down computer. Unplug from the wall. Remove battery if its a laptop. Let it sit for an hour or two to discharge power. Then plug back in and try again.

Hope it may help <fingers crossed>Click to expand...
Relevancy 27.09%

Hello guys this is my first post in this forum.

I work in IT support, and I came across a problem with someone I work with.

Guy called Tony, had a USB stick in one of his front USB ports on his computer, he accidently kicked it and broke some of the USB off in the port.

He has 2 ports on the front, and now when he plugs something into the one that isnt broken, a cooling fan at the top of the computer goes crazy, and it cant be stopped until the computer is shut down, and the USB doesnt register on the computer.

Is this a problem with wires? Or is it just a problem where the ports at the front need replaing all together?


A:USB ports makes cooling fan run full speed?

Powah said:

Is this a problem with wires? Or is it just a problem where the ports at the front need replaing all together?Click to expand...

Hard to say at this state.

By "a piece broken off", do you mean Mr. Tony broke the flashstick so that the USB-male is still plugged in, but the drive itself has been detached? Have you removed the piece which is still inside? (It helps ) - also, which OS is the computer running? This is sort of important, as different OS's works (a little) differently regarding the USB-ports.

Currently, it looks like you simply need to remove that piece stuck inside. Although if that doesn't fix the problem (or if there is no piece stuck inside), then probably a connection or two inside the port broke when the flashstick was kicked - resulting in a need for changing the entire port .
Relevancy 25.8%

the hp pavilion dv4 2012la have problems win heat because no have suficien enough grids for cool faser and wen is get hover head the tous pad works bad the solution is upgrade the bios of the note book and usa a coler and make some holes close too the gpu and cpu. if you have more problems win soud and video send a letter win the problem maibe i can help you

A:HP Pavilion dv4 cooling

Spelling a problem for you? ...or is your keyboard messed up?
Relevancy 27.95%

Hi I m not sure if this is the right forum but since I m having trouble with external HDD and removable devices through my USB ports I decided to post it here I recentry bought an external enclosure USB powered which after installing a HDD on it it was not recognized I thought I got a DOA enclosure but after trying it on my friends computer it works just fine so the enclosure this? are do underpowered, I fix My how ports USB is fine but does not work on my computer it has the option to use a power cable for USB and when I plug that cable it works fine but it My USB ports are underpowered, how do I fix this? is not supposed to work like that USB cable only is supposed to power up that device Another problem related to same issue everytime I plug my iPad on my computer it says quot not charging quot and even though it charges veeery slow sometimes does not charge at all USB drives mouse KB and printer work just fine and they are all USB very randomly I receive a message quot your device could perform faster if you plug it to a USB port quot but my ports are USB I tried changing some settings from the BIOS but nothing helps so far could you please let me know how can I check for this problem I never seen anything like this except on defective motherboards hopefully this is not the case but I don t know Thanks nbsp

A:My USB ports are underpowered, how do I fix this?

Both USB 1.1 & 2.0 supply power to the attached device(s) - - but ONLY 500ma per slot. You were right to get an enclosure for the HDD, but it needs to be externally powered to drive the higher current needs of an HDD.

It does seem strange that

everytime I plug my iPad on my computer it says "not charging"Click to expand...

, but that's different than the HDD issue.
Relevancy 24.94%

hi guys. i'm basically a noob in computer hardwares,hence help me in upgrading my pc
i want to upgrade graphics to ati or nvidia 1gb card so that i would be able to play recent games like assassins creed brotherhood, stalker, crysis2.
so what budget range graphic card would you suggest in the price range of 100 - 150$(3000-5000 indian rupee)
my psu is 250 it possible to upgrade graphics without changing psu?
present pc spec


Base processor
PentiumD 915 (P) DC 2.8 GHz
? 800 MHz front side bus
? Socket 775
ATI Radeon Xpress 200 for Intel Processors
? Manufacturer: ECS
? Motherboard Name: RC410M
? HP/Compaq motherboard name: Asterope3GL8E
Hard drive
? 200 GB SATA
? 7200 rpm
memory 2 GB (2 x 1 GB)

Expansion slots
Slot type Quantity
PCI Three (One available)
PCI Express x16 One (One available)

A:Upgrading graphic card in HP Pavilion a1522in

I would recommend a gtx 460 or an amd 6790. Both run right around $150. For only 150 you aren't going to get anything near max settings. Also you have to upgrade your psu. The recommended amount is at the very minimum 300w for a low end graphics card. You ideally need a mid-high end gpu, but you can't get all that much better performance in your price range. You should be looking for a decent 450-550w PSU. Corsair is a good brand.
Relevancy 24.51%

The old hard drive completely failed to the point that I am unable to recover any data on it. So I put in a new hard drive and went to reinstall Vista and got the lovely error about needing to load a driver for the hard drive. I've tried every Vista driver listed and it won't load the driver for the hard drive. I flashed the BIOS, still no luck. The BIOS does not offer any options to change the settings on how to read the hard drive.

Any suggestions on what else I could try?

A:HP Pavilion dv6911om - unable to install Vista on new hard drive

Somewhere in your bios there will be a setting to select which mode the hard drive is running in. You may well have a SATA drive which Vista should have drivers for but in this case you need to set the hard drive to run in IDE mode then it should install. After installation load all the mobo drivers which should then allow you to set the HD back to sata/raid operation which is much faster.
Relevancy 25.8%

Hi i have a hp pavilion in to look at it was not booting windows i got it going had it sitting on my desk when shutdown and displayed a hardware error message something to do with the memory.
so what i want to know is do the pavilians suffer with heat problems or any other problems that might cause this .........

A:HP Pavilion dv2000

All laptops suffer from heating more than desktops do. HP laptops are no better or worse than other laptops concerning heat. If you are concerned, go out and buy one of those cooling platforms for laptops. If you continue to get memory errors, check your memory using Memtest86. Let it run for 7 or more passes
Relevancy 24.94%

I m not sure exactly how old my computer is but it runs pretty decent and i can t afford anything else right now i installed the sims and i got an error message saying i need to upgrade my video card to something that supports Pixel Shading I ve been looking on tiger direct for awhile and can t figure out how to know which cards support that or which cards would be compatible with my computer Also while i have the computer open i figure it d upgrade to card on a420n video Pavilion a HP Trying be a good idea to put more ram in there which i hear is pretty simple I ve never upgraded a computer i ve only been inside a computer to remove hard drives im just wondering if its going to be too difficult for me to install the video card myself the sims system requierments GHz P processor or equivalent GB RAM A MB Video Card with support for Pixel Shader The latest version of DirectX c Microsoft Windows XP Service Pack At least GB of Trying to upgrade video card on a HP Pavilion a420n hard drive space with at least GB of additional space for custom content and saved games my computer specs hp pavilion a n ghz AMD Anthlon xp processor mb PC DDR SDRAM memory VIA S G UniChrome IGP video card in PCI bus XP service pack GB hard drive with GB free space Thanks for reading hope u can help nbsp

A:Trying to upgrade video card on a HP Pavilion a420n

if you have the version with the Asus motherboard A7V5X-LA, you are working with an AGP 4x/8x interface. They are getting scarce, but this is about as good as it gets unless you find one of the 3850's or the Geforce 9600 AGP. this one is SM3.0
Relevancy 24.51%

Okay so I'm not technologically savvy but I'm guessing to make most of the games that I download to actually run, I need a better graphics card?

Whenever I play games with decent to good graphics, my system just won't function right. They lag until my computer freezes and stuff. So I just wanna know what I can do to actually play games.

Manufacturer: Hewlett-Packard
Model: HP Pavilion dv6700 Notebook PC
Rating: 3.5
Processor: Intel (R) Core(TM)2 Duo CPU T5450 @ 1.66GHz 1.67GHz
Memory RAM: 2.00 GB
System Type: 32-bit operating system
Windows Vista Home Premium

I'm not sure what other info I would need to show you guys
I'm willing to spend around 150 or less dollars on stuff I would need to make this computer run better for games

oh my power supply:
Its a replacement AC adapter
Input: AC100-240V 1.2A 50/60Hz
Output: 18.5V 3.5A

Thanks in advance

A:HP - Compaq Pavilion dv6700t Series Laptop/Notebook what i need for better gaming?

Up the system memory to 4GB and upgrade Vista 32-bit to Windows 7 64-bit
Relevancy 25.37%

HP Notebook Pavilion Entertainment I am having issues with my keyboard. When I am in a web browser no matter what key I hit it refreshes the page.I can use the key board just fine typeing in my password and such. and use it just fine typing on the sticky note app on the computer but in a web browser it just refreshes the page.
Relevancy 27.52%


My pc has four usb ports on it, two on the back and two on the front. I plugged my memory stick in one of the front ports last night and the little red light on the stick on the stick came on but the computer wouldn't read anything on the stick. When I plugged it into a rear socket it read everything. What I find odd is that if I plug my stick into an extention usb and plug that into a front socket the computer will read the stick. Not only that but if I plug my printer, modem, stick, or anything else that needs to be plugged into a usb socket into my usb extention it all works when I plug the extention into a front port.

Can somebody explain this please?

A:USB ports not working properly?

Possibly you aren't inserting the flash drive all the way in?
Relevancy 27.09%

So my USB ports decided to stop working. I'm using Windows 7 and they were working fine this morning until I unplugged my USB devices and packed my computer, then when I came home, the ports stopped working. I have two ports and I've tried placing three different items (two mice and 1 webcam) in all the ports, no avail. Even the light under my mouse isn't lighting up. I restarted twice and when I go to device manager there are no exclamation marks or anything wrong under USB tab.

I even uninstalled all my USb serial controllers and restarted and they got installed back but still nothing. Then I disabled selective suspend and nothing too. =[
Any help guys? thanks!

A:USB ports randomly stopped working on Windows 7

I've noticed that nobody's replied to your post, so I figured I'd try to say at least a little something. I'm not too sure that it'd be of any help to you, but have you checked any settings in your BIOS that might be responsible for the control of it? It's probably a bit of a long shot but it can't hurt to check it out.
Relevancy 27.09%

Originally this thread was in the mobile computing section but I m starting to think this could be a mobo issue My USB ports decided to stop working I m using Windows and they were working fine this morning until I unplugged ports no working, longer from stemming mobo? USB my USB devices and packed my computer then when I came home the ports stopped working I USB ports no longer working, stemming from mobo? have two ports and I ve tried placing three different items two mice and webcam in all the ports no avail Even the light under my mouse isn t lighting up I restarted twice and when I go to device manager there are no exclamation marks or anything wrong under USB tab I even uninstalled all my USb serial controllers and restarted and they got installed back but still nothing Then I disabled selective suspend and nothing too I also tried going to each USB Root Hub and right click on it left click properties left click power management Uncheck the box allow computer to turn off this device to save power This didn t work as after I restarted it became checked again I also upgraded to the newest BIOs but still nothing Any ideas is this a mobo issue nbsp

A:USB ports no longer working, stemming from mobo?

Very odd symptoms... I'd suggest you try booting into an alternate non-Windows OS, if your USB ports still don't work then you've ruled out Windows and would say it must be mobo/hardware/BIOS related i'd think.

See step #2 in link below to download and try booting into Knoppix then see if your USB ports still don't work. See How to recover your folders/files when Windows won?t boot
Relevancy 27.52%

I was wondering on how to open ports so i can run a server and be a host.
Can u please give me a simple guide on how to open ports on your router.
Is there any programs that can actually open ports on ur router for you?
cause im too lazy to do all that command promt stuff. but if using command prompt is the only wy ill do it.

Can u also teach me how to forward those ports to your router so that outside sources can access them.

A:How to open ports on your router

ragne2 said:

I was wondering on how to open ports so i can run a server and be a host.

Is there any programs that can actually open ports on ur router for you?
cause im too lazy to do all that command promt stuff. but if using command prompt is the only wy ill do it.Click to expand...

Opening a port is a goofy term - - let's start with just using a port.
For a port to exist, some program creates a socket and then uses it to LISTEN for connections. You can see this with (command prompt tool) netstat -oan
Programs which are awaiting connections show up like

the nnn are the 'port numbers' created by the program.

Q? Which ports are open? A: only those that exist, eg: port 135 is open, and port 136 is closed (ie doesn't exist).
Regardless of your other setups for the router and firewall, the port is not open unless a program is LISTENING.

HOWEVER, that's only one-third of the story; two other conditions must be met

the firewall on that system must be configured to ALLOW traffic to the specific port(s) desired
and, if a system not on your LAN needs access to a program on that system, then
the router must port forward
Consider this network

+ ------- System A
+-------- System B

if System A has the program (and the port is listening and the firewall allows)
then System B can get to it without concern for the router at all.[*]

Now if your friend in New York wants to connect to System A located in Los Angeles,
then the router must port foward.

Port Forwarding requires that the server address never change,
so first you need to arrange to have System A use a static IP address on your router.
Once that's correct, then, using the documentation for the program on system A, you add a port forward like
forward port xxx to IPaddress-for-systemA​
SO; get [*] to work first and then deal with the router
Relevancy 27.09%

I've just finished installing a new motherboard (Asus P5P43TD) into a friend's computer about 2 hours ago and have been unable to get the USB ports working. I installed the chipset drivers, Ethernet controller drivers, and Asus EPU-4 drivers, but the USB ports simply do not function. Which means I have to do everything with a friggin keyboard. That has made things interesting to say the least. I grabbed the most recent chipset drivers off of Asus's website and it installed the SMBus drivers (which I beleive are responsible for USB) and everything else. Any help is greatly appreciated.

Motherboard: Asus P5P43TD
Video Card: XFX 8800 GTX
Sound Card: Creative Extreme Gamer
OS: Vista 32 bit
Hard drive, Optical drive, and PSU are unknown.

A:USB ports not working after drivers installed

Give this a shot. See How to Reinstall Your USB Controllers and Motherboard Chipset Drivers
Relevancy 28.38%

Good afternoon I am unable to restore my Creative Audigy sound blaster to my computer after i have disabled it The sound had stopped and I I after disabled sound How do I Vista device it? on enable determined it to be in the volume control of speaker system So thinking i could somehow return to the original sound my HP Pavilion I went to sounds and clicked on Playback and saw there was two Audigy devices Thinking I needed to disable them to restore original sound I did Now I have nothing I dont How do I enable sound device on Vista after I disabled it? know how to restore to original and can t seem to get the Audigy back on When I go to the box now it says no sound devices installed and when I go to my Audigy program an error box comes up and says How do I enable sound device on Vista after I disabled it? quot devise for this application is not detetected quot When I search through other areas it says the device is functioning properly and drivers are up to date One other thing I have the installation cd and when i insert it it says the OS doesn t support it So I need to get the device enabled again or I need to figure out how to get the original sound back on the pc Thanks for any help nbsp

A:How do I enable sound device on Vista after I disabled it?

#1 Click on Start and then Control Panel.

#2 Click on the System and Maintenance link.

Note: If you're viewing the Classic View of Control Panel, you won't see this link. Simply double-click on the Device Manager icon and then proceed to Step 4.

#3 In the System and Maintenance window, click on the Device Manager link near the bottom of the window.

#4 look under "Sounds, video and game controllers" you should see Creative Audigy with a red X, right click it and enabled it.
Relevancy 24.51%

Last night I powered off my laptop, I got into work and powered it on, and to my disliking I discovered that it would turn on, the lit wifi buttons and volume controls would turn on, but the pc would not boot up. To add to the mystery of this the num lock and caps lock lights keep flashing. Anyone have any ideas as to what is wrong with my laptop?



A:HP Pavilion dv4 - 1428dx series laptop, powers on but won't boot

problem resolved, my CPU went bad.
Relevancy 29.24%


So I have this little question (out of curiosity) what UTF "version" uses and how (if it's possible) can it be enabled on a telnet server?


A:What UTF is and how to use/enable it on telnet server?

UTF are character encodings, eg: utf-8 character set

just google UTF for it
Relevancy 24.51%

Before going to work this morning I put my computer on hibernate, when I came back my wifi networking was down. It is not that I am connected to a network but cannot open internet, my wifi network does not start up. The little red light does not turn blue! I have no idea why it is not working, any suggestions appreciated.

A:HP Pavilion dv9700 Notebook PC WiFi network not working

Hey, reasons for the light not to turn blue could be a problem with the physical hardware itself, being that it somehow shorted or something along those lines.

Another reason could be that it is not being supplied power, once a computer goes into hibernation mode it is given the right to stop power to that device, and possibly once starting back up, there was no power given to the Wireless? Have you tried to shutdown the computer normally and try it again? Another reason would be that the wireless settings and everything are all controlled by a service, and maybe the service failed to start. Rather then get you to go to the exact spot and try and turn on the service, just restart the computer. If that doesn't work and you want to try and manually start the service, reply back that you would like to do so and I will try and step you through it.

Other things to try - Reinstall the drivers for the wireless adapter, you will need to go to HP's website, type in your DV9500 as well as the other numbers on the bottom of the laptop on a white sticker, located near your prodocut key usually...

if you are comfortable with opening the laptop up, on the bottom side of the laptop, one of the covers will likely have the wireless card in side, it is connected by 2 wires, a black and a white, if you go to take the card out remember where each cord goes. You can take the card out, boot up the computer, shut it down, reseat the card, and boot up the computer, see if anything comes up..

WARNING: If attempting to remove the wireless adapter card, please be aware that if the card is not damaged, you could damage the card, make sure you are grounded when working inside of the laptop, as well make sure that there is NO POWER to the laptop, this means Remove both the battery and the power cord..

Nothing else comes to mind of what it could be...

If you can't get it to work, try safe mode with networking, if still nothing, I would suggest to bring it to a shop to see if they have a way to test the physical card in a similar laptop or possibly have a new card to test in yours..

EDIT: This is something I found on the Mobile section of this forum where a fix was found on other HP Dv**** Models,

WARNING:Please read the full post that suggests the fix, as it does warn that this CAN cause further damage. This test raises the computers core temperature as well as other components to try and warm them up if there are any cold joints on it, But may damage components due to high temperatures. WARNING
Relevancy 24.94%

Hello After having this HP Pavilion a n for many years now and always having to hear the HP motherboard Pavilion A8N-LA a1410n solution fan Asus or screaming fans whirling away at I have found a solution I did not discover this I found it in little post in one of the many many forums with complaints about this Motherboard s BIOS update problem So I am here only to post another one so that others may find it easier When booting up your computer hit F times and it will enter Setup just the same as if you had pressed F BUT ITS NOT THE SAME Go to the BIOS menu in setup What was once inaccessible in the HP Pavilion a1410n or A8N-LA Asus motherboard fan solution original F setup is now available in the F Setup You can have full control over the fans speed and start up voltage I just discovered this about minutes ago and did it and my computer is quiet as a mouse FINALLY I HOPE THIS WAS EASY TO FIND I spent all day scanning forums for solutions SpeedFan Sucks F dance nbsp

A:HP Pavilion a1410n or A8N-LA Asus motherboard fan solution

If your temps are still in a good place, gratz and thanks for the heads up!
Relevancy 29.24%

Hi, if I go to Network Sharing Center, then advanced settings there are two options: Turn on Network Discovery, and Turn on File and Printer sharing."

The first one is enabled, the second one (file sharing) will not enable.

I had this problem with network discovery as well, but I did some reading and found it was a problem of not having some services started.

So I assume file sharing will not enable for the same reason.

Does anyone have any ideas on what services need to be enabled?


A:File sharing won't enable

what are your specs? go to the properties of your network adapter and see if it has file and printer sharing for microsoft networks enabled.
Relevancy 24.51%

Help! Now my standard VGA Graphic Adapter only works on my HP Pavilion dv9000? I have a Nvidia GeForce 8600M GS on this Laptop but now its not loading up right, on start-up? I had to, chip Rev for the Nvidia to get my laptop to work... or see anything on the screen? but now I can not play any game or watch movies correctly. HP are no help ether as my warranty has run out now, can anyone help me? I have attached some images of my display settings.

A:My standard VGA graphic adapter only works on my HP Pavilion dv9000?

If you are using Vista 32 bit go here an get the Video Card Drivers
If you are using Vista 64 bit go here an get the Video Card Drivers
Relevancy 28.38%

Hi, I'm using windows 7 x64.

Network discovery and file sharing will not enable. My brother cannot access my shared folder from his computer (we're on a lan).

I read to enable these services:

Computer Browser
DHCP Client
DNS Client
Network Connections
Network Location Awareness
Remote Procedure Call (RPC)
TCP/IP Netbios helper

One or two were disabled so I started them. However Server will not start, it says: "The dependancy service or group failed to start."

Any help appreciated.
Relevancy 27.09%

when i insert any usb device including a usb flash drive, my laptop doesnt detect it.
Relevancy 25.37%

I have been given an HP laptop to look at originally the sound was not working so updated drivers and rebooted laptop on reboot it would not boot up I have tried booting up from recovery partition F but it just black screens I have tried booting Pavilion not dv9500 HP booting up from Vista disc but it just comes up with the first screen with copying files along the bottom and then it black screens Sometimes it willl restart I will press a key to boot from cd it goes through copying files with the white progress bar along the bottom and the stops with a blank screen or restarts I have tried the same with a Win disc which does the same but stops on the next screen with quot starting windows quot displayed I have run memory checks and disc checks and both were fine This has me puzzled so I am hoping you guys have a clue whats going on here nbsp

A:HP Pavilion dv9500 not booting

Defective hard drive is my guess.
Have you tried removing and reinstalling the partition? If you cannot do that, you should try another hard drive as a test.
Relevancy 25.8%

I recently bought an HP Pavilion used. Here's the problem. The battery was getting ready to expire and then the computer went into "hibernation" mode. After plugging in the charger to recharge the battery and turning the computer on manually I encountered the following: The screen does not come on at all, but the computer "acts" like it's trying to start? The keyboard lights come on and I can hear the the fan start. After a few seconds it "restarts" itself and repeats this over and over. The screen never comes on through all this? Any suggestions? HELP!!! Thanks for all your replies
Relevancy 27.95%


I want to turn on my PC automatically during late hours so that I can do some downloads and maintenance works on my PC automatically!!
But I cant find an option for RTC alarm enabling in this BIOS!!
Whats wrong with this Mobo?

Will any one help me?
Relevancy 27.09%

Hello all I am new to the Forum but after a with out in Mic AC'97 and Line Problem and Audio ports Realtek week Problem with Mic in and Line out ports and Realtek AC'97 Audio of searching for answers I figured mine must be a unique problem I ve had a no sound problem with my PC at work for sometime programs and browsers have always run perfectly but with no sound I suspected a disabled sound card but the PC has a sound card built in on the MB and it has always been enabled My second solution was out of date drivers and after seeing a yellow explanation mark next to my sound device I downloaded the appropriate driver as well as the latest DirectX for my OS WindowsXP I then proceded to download all available codecs for my built-in sound card the Realtek AC Audio model Complete specs will follow So far no good but with these was installed the Multi-Channel Audio Configuration program by Realtek which enabled me to see that upon inserting my speakers into the line-out it was being detected as mic-in Bizarre I tried fiddling about trying line-out in and mic ports on the front and rear of the pc but in every case all that was recognized was a Powered Speaker in Mic-In connector Anyway I downloaded a few media players with visualisation to make sure that the PC was indeed generating sound and it wasn t just failing to comprehend audio files completely admittedly this should have been an earlier move But everything was Ready Ok and installed status wise So then I m fiddling about again and I try running the Realtek Audio Configuration s connection check whilst playing some mp files in wmp my speakers currently in line-in And for seconds whilst the test is commencing I hear the first sound this computer has ever produced but upon this tests completion and the result that the powered speakers are apparently connected to Mic In the sound fails once more This has got me once again royally stumped and I ve filtered through many threads regarding the failure of the Realtek AC codecs drivers etc but I ve reinstalled all the necessary software countless times and feel this could possibly be a hardware malfunction Nevertheless I decided to put it in the audio thread sorry if I ve done the wrong thing Thanks to any helpers in advance Please help Spud Sound device Realtek AC Audio Manufac Realtek Status OK PNP Dev PCI VEN DEV amp SUBSYS A C amp REV amp AAA amp amp A IRQ Driver c alcxwdm sys nbsp

A:Problem with Mic in and Line out ports and Realtek AC'97 Audio

During your-

Spudrifle said:

fiddling aboutClick to expand...

did you try downloading and running OpenAL from here?
Relevancy 27.95%

I just bought a new acer aspire 5517 and it only came with 2 USB. One of the usb ports where broke when i got it so i contacted acer and the would not do anything about it. and my front Usb lookes fine but does not work. i tried
- Power Reset
- Device manager
- and i do not want to pay money for it

Someone Please help

A:USB ports broken

See How to Reinstall Your USB Controllers and Motherboard Chipset Drivers.

Don't know if will help or not (depends on exact cause of your problem) but is worth a shot
Relevancy 27.09%

Laptop is a 4 year old Alienware M5500 with the Intel Centrino 2.0. Let me know if anything else is relevant and needed.

My computer decided to perform some kind of fatal error while I was converting some music in Itune and then entered my Jump Drive into the computer. It shut itself off and wouldn't boot. I reformatted and reload my OS and it still wouldn't load. So I reset the bios by removing the battery and the back-up battery (little round one). And then the computer booted as usual.

Is there away to get them working again without having to re-format and reload the OS?

Any help would be greatly appreciated!

Everything is fine so far, just that my USB ports aren't functioning as USB 2.0 ports anymore. I tried resetting the bios once more (thought I did this in the past but can't really remember...)

A:My USB ports aren't recognized as USB 2.0 after reboot

Try this update..
Relevancy 24.51%

hi everyone first off i just want to say that i am terrible with computers - and unfortunately have a huge problem my keyboard doesn t work as far as i can tell i am HP working Premium, not Home keyboard laptop Vista Pavilion usng an hp pavilion entertainment laptop running on vista my keyboard says that it s a hid keyboard device when i go to my control panel and click on keyboard it says that it is working properly but in reality it isn t working at all what happened was this i was working on microsoft word last night typing out a document very fast when all of a sudden asi typed out a word correctly -it would appear on the document with three consecutive letters for exampl if i typed the word after it woul come out on the screen as aaafter i ignored the problm and kpt on working however as i was working i noticed that the light on my caps lock key was on it didn t matter how many times i presed it the caps lock key remained on i continued working on ms word all night without any other roblems i went to bed really late and didn t bother turnig my Vista Home Premium, HP Pavilion laptop keyboard not working computer off instead i just closed the screen this morning when i tried to log on my mouse on the laptop didn t work so i just plugged in a physical mouse into the computer next when i tried to type in my log-in password the keyboard would not work at all i also noticed that the caps lock light is still on i clicked on the little blue option box in the left-hand corner and selected the on-sceen keyboard i ued this to type in my password now that i m on my desktop-i still can t use my keyboard at all and the caps lock key still appears to be on i ran the systems-restore but it didn t fix anything help please nbsp

A:Vista Home Premium, HP Pavilion laptop keyboard not working

kimsland said:

Cleaning Laptop KeyboardClick to expand...

Other than cleaning
You may need to physically remove the keyboard (usually via removing screws underneath laptop)
And disconnect it then reconnect it

You could also test with a USB keyboard, to confirm it's the laptop keyboard only
Relevancy 27.52%

On my HP Windows XP desktop, audio and the USB ports stop working while the rest of the PC is working fine. The only way to recover is by rebooting the system. After reboot the audio and the ports work fine for a couple of days and the problem repeats. I have tried downloading the latest RealTek audio drivers and cleaning the Registry etc. Nothing has helped.

Any suggestions?

A:Problem with Audio and USB ports

What type of audio card do you have? Is it an add-on card? Is it a USB card?
Relevancy 25.37%

The hard disk crashed and I have been unable to reinstall Vista Home Premium with org. and recovery disks on new Hard Disk. Would like to reformat and install Win XP on it. Can't seem to figure out how to do it.

I get the "no operating system found" error. The HD is unformatted as it is new.

I've been all over the HP site and followed the endless loops for information, to no avail.

Any help will be greatly appreciated (sp).

Earl Cravens

A:Replaced HD and want to install different OS on HP Pavilion dv6000

You have to have a valid Windws XP install disk... HP install disks detect the hard drive, and if they are not designed specifically for that drive, they wimply will not work. You may have to buy a copy of Windows XP, then boot to it...
You will need drivers, so check to see if the HP website offers drivers for that system configuration. If not, you have to be experienced enough to locate and download them yourself.

But what you propose is very possible... just go to the HP site for your HP model, and look for what operating systems are supported.
Relevancy 25.37%

Need suggestions for system temp / fan speed monitoring software. Doesn't need to be fancy - just basics - & work.

Special ordered this Pavilion d5200t ATX - didn't come w/ any monitoring util. Was told by HP they didn't have one & AFATK, Intel didn't. If ASUS has one, couldn't find it. Seems odd.

HP support gave this link , which they said "should work." Haven't tried it. Bit leery. Comments?

MB - Asus IPIBL-TX (HP: Burbank-GL8E)
Intel Quad 9400
Intel G33 chipset

If need other specs, let me know. Thanks.

A:Need Temp/fan monitor for my Pavilion

This is my preferred software for temp/voltage/fan readings and monitoring

Hope it helps
Relevancy 28.38%

System = Dell Inspiron 531

Had issue with boot drive, so replaced and re-loaded Windows Vista OS.

Decided to add original drive to grab some data; so installed the old drive in Sata Port 2. The drive did not work -- I thot is might be a bad SATA cable, so started switching things around.

Net is -- drive works fine if new boot drive is in SATA port 0; and prior hard drive is plugged in SATA port 1 (where CD had been plugged). Copied data, etc.

So -- knew I needed to ENABLE SATA Port 2 in BIOS -- but when I go there -- those items are 'Greyed out' and not selectable.

KEY QUESTION - Is there some other change that has to be made to enable SATA ports in BIOS? I went in Device Manager -- found the 'controller' entry -- but nothing seemed out of place there.

Thanks in advance for any suggestions.

Regards, HisRocker

A:Adding 2nd SATA Drive -- Can't Enable in BIOS?

Under Integrated Peripherals in the BIOS are the SATA ports greyed out even if there is a device plugged into one of them? I wish your manual would show illustrations of the BIOS pages but they don't.
Relevancy 25.8%

I have an EVGA 750i SLI FTW motherboard and recently (after moving the motherboard to a different case) there is no sound coming from the rear ports. When I connect headphones to the front, the sound works. Is it a sound card problem (I'm using the integrated card)? It's not a big deal, I can just pick up one for 20-30 bucks but I just want to know the problem beforehand. Thanks in advance.

A:Sound issues: back ports not working, front (headphone) port works

the front ports are most-likely canceling out the rear ports, unless you've dealt with a similar setup that worked fine.
Relevancy 26.66%

HDD health was 88%
Reset BIOS, didnt work.
after the xp loading screen, a black screen comes up for about 1-2 min.
Desktop is rly slow, then after a short black screen 1-2 sec. speed is normal(ish)
Computer usage 100%.
Most things run very slowly.
mobo done?
someone said i should change the ram sticks, and that they are causing the slowness and usb problems after an outage?

Its happened three times, first time, downloading xp service pack 3 helped.
second i just left it to sit for a week, then my laptop HDD gave up and i tried to hook up the PC again, no go. waited a day, tried again, works.
Then another power outage yesterday and im clueless.

A:Slow start up, usb ports not working after power outage

What caused the power outage, because it can explain a lot. Make sure it wasn't like a surge or anything.
Relevancy 27.52%

hey electricity working, ps2 My ports no not there sory for my bad english my freind have a computer need to be formated becuse his windows has crashed there is a system file has been deleted so i tryed to format the pc but i enterd the cd then i pressed the del button so i can enter the bios screen but no such one button is worked the num caps scroll locks no one is on i tryed to light them but they didnt work so itryed an ibm keyboard but the all the lights keep lighting and disconnect i tryd the mouse lasr mouse with ps port but the laser light dosent work and the weel light dosent worked too finaly itrayd a usb keyboard but the usb doesnt work until windows start but i need to start bios and usb doesnt work and the ps so how i will boot from xp cd please heeeeeeeeeeelp sory for my bad english lt lt and for this story haaha nbsp

A:My ps2 ports not working, no electricity

Basically in bios setting mouse are not work.
you only use with keyboard.
without keyboard you unable to reinstall the XP. you check the mobo is it any damage occur in ps/2 connector.
Relevancy 25.37%

Hi all,

I have a HP Pavilion DV1000.Every time I power the laptop the power light and few other light on the top comes on and it goes off again.
I have tried different power adaptors and still no luck.

Any sugestion please.


A:HP Pavilion DV1000 power lights comes on and then it goes off again

I had a Mobile phone that did that replaced battery and it became fully functioning again. Is there any way to run without battery attached? power source only or could you borrow a battery from someone to check results?
Relevancy 27.95%

How do i fix or enable my system board Dell Latitude C640 on my laptop ?? Question US Marine in Iraq needs help azap!!!!!!!Sempre Fi USMC

A:How do I fix or enable my system board on my Dell Latitude C640?

You'll have to explain what is "system board" and what exact problems you're having.