Windows Support Forum

Re: spectre X360 mouse problems

Q: Re: spectre X360 mouse problems

I am have the same issue on a brand new spectre x360 I just purchased. My bios and drivers are all up to date.Is there another solution to this problem other than a reboot or closing the lid?
Relevancy 100%
Preferred Solution: Re: spectre X360 mouse problems

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 21.5%

After going through lots of programs and cleaning out an infection, I restarted it and it is almost totally unusable. I can confirm that both mouse and keyboard work, mouse light is on, and keyboard lets me open the calculator. Any help please? Thanks.

A:Can't move my mouse, but computer is not frozen

If the mouse is USB (not a PS/2 connection), try disconnecting and then reconnecting. You could also try a different USB port for the mouse.
Relevancy 15.05%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
Relevancy 21.5%

I want to buy a new gaming mouse and these are the three mice that I have for the same price-g9x , g402 and CM Mizar for 40$.please suggest me the better one and please tell why too.does g402 have no acceleration and is it the fastest mouse and is its sensor as good as g502.please reply quickly.please suggest any mouse if you consider some other mouse better for the same price.
thanks in advance
Relevancy 14.19%

AMD has released an updated statement regarding the noise issues experienced by the initial buyers of its Radeon R9 Fury X graphics cards.

Read more

A:AMD issues updated statement regarding Radeon R9 Fury X noise problems

Are they saying "screams like a banshee until we smothered it in glue"? Does anyone have a more engineered approach to the issue - like decibels at a specific distance?
Relevancy 15.05%

It's been a while since I've posted but I've obtained most of the Sims 2 and I TRIED to install Double Deluxe but for some reason my dvd drive isn't recognizing the disc. It spins up and tries to read it, but doesn't do much in the line of effort to read it.
There are no scratches and I took care of the smudges with a cloth. Still unable to read the install disc. It'll read the promo/bonus disc and play it just fine though.
The computer is a Windows 7 with an HL-DT-ST DVD+-RW GT60N Drive.
I have enough RAM, Graphics and other things to run it.
300 Gigs of Space left on the HDD. No idea what's going on here.

A:Sims 2 Double Deluxe problems

You might have a bad optical drive. Does it work with other DVDs (DVDs not CDs)? Do you have access to another DVD drive with which to substitute for testing purposes?
Relevancy 15.05%

I have a linksys router that has stock firmware and I can get into the config by 192.168 etc but I can't get it to see the internet. I have a isp that gives dhcp ip so no login needed. Any ideas?
Relevancy 15.05%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
Relevancy 21.5%

Hi I would appreciate if someone could help me please The problem I have has been going on since about the time I formatted my PC and reinstalled Windows Had issues with BSOD on install because of my graphics card seem to have been slighty dislogded See http www techspot com vb topic html Okey the problem is my mouse keeps freezing up after a while and after moving it or clicking a couple times it works again When this happens I get either a beep or the usb disconnect connect sound depending on which mouse is being used Current using Windows mouse issues freezing 7 Bluetooth Apple Magic Mouse connecting to a generic Windows 7 mouse freezing issues bluetooth dongle this makes a beep when Windows 7 mouse freezing issues it freezes The USB Wireless Logitech Dongle Logitech Mouse I had before this made disconnect connect sound The USB Wired Mouse before the Logitech also made disconnect connect sound I have tried to work around this using several methods but have had no luck Steps taken to try and rectify issue Changed mouse I am on my th mouse now I will not change for another again the mouse is not the problem Tried all the mouses on other computers where they all worked fine I have switched ports on numerous occasions all other device work with no problem keyboard touch screen monitor external hard drive s usb flash I have removed conflicting hardware and ensured only on mouse is plugged in also removed touchscreen cable from monitor I have gone to Device Manager and set USB Root Hub and Power Management tab and unchecked quot Allow the computer to turn off this device to save power quot on all devices I have removed drivers for all other mouse s used previously I have disabled C E as this uses some power saving methods I have check Event Viewer which only has networking errors which all forward to my network drive I have run System File Checker SFC sfc scannow I need to know whether Windows is the issue or whether its the usb ports Can anyone please help me as it is now really bothering me I can t even play Battlefield games Thanks nbsp

A:Windows 7 mouse freezing issues

This is a problem I have not seen before. Try using this guide to find any other mouse drivers that you may not have deleted.
Relevancy 14.62%

Basically I think it s Laptop Samsung Ultrabook Series 5 Problems; been happening for a month now My laptop screen glitches - the images distorting and sometimes green text appearing - Laptop Problems; Samsung Ultrabook Series 5 before Laptop Problems; Samsung Ultrabook Series 5 righting itself and crashing The only way I can get the Laptop Problems; Samsung Ultrabook Series 5 laptop to function again is to turn it off via the power button or take the battery out and put it back it again It has also become slow starting up - taking at least five minutes before you can log in and then a further five before you can actually do anything The cursor sometimes gets stuck in the center of the screen - I can access things using the tab screen but the cursor won t move whether I use the laptop touchpad or my USB mouse The fan has also been sporadically speeding up before calming down again - even though I ve been doing the same thing for the past god knows when I ve done a boot-up scan using avast had a look through all of my files and gotten rid of any old files that I don t need on there in an attempt to create some space but I ve got about - gb free so I can t see why that should be a problem Nothing happens before the glitches crashes so I don t think I m causing it by moving it and so on About a month ago the charger port was fixed at a laptop repair shop and then the laptop itself was sent off to SAMSUNG to have the motherboard replaced because I mistakenly wiped the bios since one driver update shut the laptop off in the middle of the bios update so I don t know if something is loose and so on I m planning on selling it in a month or two so it s not that much of a problem but of course I don t want to sell it to someone if its being a pain in the backside I also switched from integrated graphics to a nvidia geforce graphics card that is in the laptop when I bought it so that might be why Basic Info Samsung Ultrabook Series Intel Core i GB Ram TB Hardrive bit Operating System NVIDIA Geforce GT M nbsp

A:Laptop Problems; Samsung Ultrabook Series 5

This sort of problem is tough to troubleshoot over the internet. It could be quite a few things that could cause the symptoms that you're experiencing. With that said, I'd probably start with updating the discrete GPU drivers. Since you did switch from integrated to discrete, this could be the main cause for the graphic glitches which is probably crashing the system.

Moving forward, I think you should download something like CPU-Z to monitor the CPU load and temperatures during the crashes. It could be that your CPU is overheating and could use some attention.
Relevancy 15.05%

I have a keyboard that has been working fine last night then this morning this happened:

When I type o it types o+ and when I type l it types l and enter (the key)
So this makes it extremely hard to get anything done, please help, thanks

A:Keyboard problems

How old is the keyboard? Sometimes "gunk" gets built up under the keys and can cause the keyboard to start failing. Have you tries to remove the keys (or take the keyboard apart) and properly clean it? There are plenty of tutorials (video and non-video) available if you are unsure of how to clean a keyboard.
Regular cleaning on all computer parts will extend the life of those parts.
Relevancy 21.5%

Anyone that spends a considerable amount of time in front of a monitor can attest that finding the right mouse is a must. While there are plenty of boxes to tick when searching for a suitable pointer, for me, it...

Read more

A:Weekend Open Forum: What kind of mouse do you use?

Roccat Kone XTD (laser). It's the best mouse I've had so far. My Death Adder has been demoted to closet duty.
Relevancy 15.05%

For about the past month or so, my W7 tower on DSL occasionally loses its connection to the internet so I right click the the icon in the notification area & click trouble shoot & it reconnects yet my iPhone & Ipad remain online no problem.

A:Intermittent DSL connection problems

Clearly the router is doing find and the activity on W7 IS THE ISSUE.
Examine carefully what was active when the connection was lost.
Relevancy 21.07%

Neither my keyboard or mouse are working on any of the 7 USB ports on my computer. My mouse was initially working, but I read somewhere if you delete the keyboard drivers you can reinstall them and it will work again. BUT when I was doing that I stupidly uninstalled my mouse driver so now NOTHING works. I can't try if it works in safe mode because my keyboard doesn't respond when I hit f12 during boot up.

When I plug in the mouse or keyboard, I get a window that pops up asking if I want to install the hardware, but it's impossible for me to do anything because my mouse and keyboard don't work! If anyone has any ideas I would greatly appreciate the help. Thanks!

A:My Dell Demension e510's (Window's XP) keyboard and mouse don't work

First I would try to find a different working keyboard because you should at less be able to boot into safe mode because the drivers don't even load until windows start loading.
Relevancy 21.5%

When I say gaming I mean 5-button. I like those forward-backward buttons and I rely on them heavily. I'd prefer something ergonomic, but if my budget is too low then what the heck. I've had a 10 TeckNet mouse for the past 2 years and it's been okay, just not the greatest position for my fingers, which hurt after prolonged use. I am, of course, right-handed.

Right now my best bet is to get the MSI Interceptor DS100.
Relevancy 21.5%

Many manufacturers have developed a touch-first approach to input devices, spurred by the rapidly evolving mobile revolution. Such methods work great on select devices but when it comes time to do some serious work, nothing has yet replaced the trusty...

Read more

A:Logitech's new MX Master Wireless Mouse said to be its best yet

Too bad they don't mention a left handed version.
Relevancy 21.5%

For reference I have a Lenovo Y P IdeaPad laptop I can list additional specs if needed although I m not sure if it s necessary or not Anyways so I ve always been using a wireless USB mouse with my laptop and I ve had no problems with it up until a few days ago I was using a simple Logitech wireless USB mouse the kind that was no more than USD Well about a week ago I found out the battery was dying and I had to replace them but I waited a few days until I noticed a weird quot lag quot in my movements of the mouse Sometimes the mouse would occasionally lag behind my movements - say if I move my mouse in Moving lag mouse noise static causes and rapid movements it Moving mouse causes lag and static noise would show onscreen of much slower movements So I replaced the battery and reset the mouse To no success I still had the same issue except I realized I was unable to Moving mouse causes lag and static noise move the mouse while streaming YouTube videos or playing games or it would cause severe lag on both the slower mouse movements and either the YouTube video would stutter lag or the game would lag also causing this static-y sound to appear whenever it was lagging behind So earlier today I picked up a new wireless mouse this time a Microsoft one for about USD Let me just say that I have never had issues where I had to replace a mouse except maybe once every months to a year for other minor reasons So I installed a new battery installed the new mouse into the laptop and I am still getting the same issues Sorry if this is long but I am not extremely tech savvy in this wireless mouse department lol I have looked all over the Internet and couldn t find anything that fixed the solution for me I have Windows by the way Also if it matters I recently installed Norton Security after my subscription was close to ending and I also installed an older version of Direct X as well as install CCleaner I don t think these problems affected this but still I also scanned my laptop for viruses and I am told by Norton that I do not have any viruses or anything Finally I tried to go into Device Manager and uninstall the USB wireless mouse drivers and reinstalled them to no luck The only temporary solution I have as of now is to take out the USB for five seconds and put it back in but that solution only works for about minutes until it goes back to normal Also if anyone knows any solutions try to make a step by step process or something because I have trouble finding certain things on my computer as it is lol Thanks in advance nbsp

A:Moving mouse causes lag and static noise

My fairly new Acer R14 has the exact same problem and can't find a solution anywhere. I'm using both a USB mouse and keyboard (not wireless), and I also happened to fix it momentarily by unplugging them.

Some guy fixed a similar problem by taking off the microphone boost.
Got to Control Panel > Sound > Recording > Properties > Levels > Microphone Boost.
Maybe you'll have better luck than me.

I'm a noob with computers so I don't know if this matters but I downloaded a game that runs on DirectX 9, to which I understand the computer already comes with DirectX, but I don't know if it downloaded something extra for an older version. Also can't uninstall it.

Sorry for not being so helpful.
Relevancy 15.05%

I have a Dell Optiplex 330 which has a 2.0 dual processor with 4gb of ddr2 ram. I have windows xp installed and I have a video card that has 1024 mb of ram. I am unsure of the brand of video card or further specs. I bought it off of ebay some time ago.

My problem is that when I try to play streaming video it wants to freeze a lot. I have already given more space for the virtual memory on my computer: I think 4 to 8 gb and I have set my hardware acceleration way down but these changes haven't helped.

I can download and play movies fine, I only seem to have problems when playing streaming video like from or which directs you to sites like: putlocker, deditv, sockshare, loomba, etc. I have used other computers and they don't seem to have as much problems with this so I hope that somebody knows what I need to do to solve this problem. Thanks in advance for any help.

A:Freezing problems with streaming video

When you say freezing, do you mean just the video freezes, or the whole system? If its just the video, it could have something to do with your internet connection. Is the computer on wired internet or wireless?
Relevancy 21.07%

Hi all So I got G today from an online webstore today I ve been using a super old button logitech back-up mouse since my G died I ll describe my procces thus far Plugged in G when computer was on No sign of life windows tries to install a driver fails Device manager lists the G under Other devices with a yellow triange telling me no driver is installed Then went to logitech com to download the drivers and support software LGS LGS being the Logitech Gaming Software utillity that is the only downloadable support from logitech com fails to recognize my mouse just the G keyboard I Logitech issues G502 connection/recognition mouse have Tried the troubleshooting option of rebooting and re-installing the LGS no dice However the G does light up during booting up Booted the computer with the backup mouse unplugged and the G plugged in It works cursor movement left right click no advanced buttons for - mins before going back Logitech G502 mouse connection/recognition issues to the Device fail to install and the Device Manager placing it under other devices etc Plugged my backup back in tried manually updating drivers in the Device manager selecting it as a Mice and other pointing devices type of device and choosing the drivers from LGS drivers LGSHidFilter tried all subfolders of drivers but this one was the only one that held any inf files the Device Logitech G502 mouse connection/recognition issues manager recognised as a good drivers Selected the g driver No G driver was listed only a G s It tried to install but gave the error Device could not start code After reading threads in the logitech forum tried the FWUpdate a firmware update for the g option but installer tells me to connect my mouse before proceeding Even though my mouse IS plugged in Plugging it in and out doesnt help As for now im at my wits end I even tried borrowing someones g mouse and encoutered much the same issues All I can think of is to race from booting up with just the G plugged in to either the FWUpdate or the manual install from the device manager and see if the install goes through when it still works Seems rather unlikely and a silly way to go about things I hope anyone with similar issues can help me out any advice is super appreciated P S oh using Win ultimate bit nbsp

A:Logitech G502 mouse connection/recognition issues

I just fixed this exact problem on my Win7 Media Center x64. It's a bit convoluted, but the core of the issue is Windows not recognizing the device type properly. What you have to do is open up Device Manager and assign the drivers for Windows. This should fix the mouse.

Head into Device Manager and click View up top. Choose Devices by Connection. You'll see why in a second.
Expand the top entry until you find a PCI Bus. Expand that, then expand all the USB Host Controllers. One of them should have an entry for G502 Gaming Mouse under it.
Right click it and select Update Driver Software, then Browse My Computer for Driver Software. Now click "Let me pick from a list of device drivers on my computer."
Go down to USB Devices and install it as a USB Composite Device. The mouse should light up. Nice! It still doesn't work, though.
Now there'll be two more entries underneath the USB Composite Device, both of which should be G502 Gaming Mouse. Right click one and go back to the list of device drivers. This time go to Human Interface Devices and select USB Input Device for each of them. A bunch of new devices should populate beneath each USB Input Device, one of which should be HID-Compliant Mouse. Your mouse should now work!
Relevancy 21.93%

Hello everyone!
I'm having issues with my mouse seems to randomly move on its own. It doesn't happen all the time, It's rare for it to occur outside a video game. When I'm playing it will do and move to the exact same place everytime. It press buttons and move the mouse to one corner of the screen
this may happen 2-3 times within a 40 minute game.
Anti malwarebytes can't find it, I tried cc cleaning, my mouse is brand new and has been working beautifully until just this week.

I'd be grateful for any help or advice


A:Mouse moves on it's own

Have you tried any other mice?
Relevancy 21.5%

Hello, lately I've been having the strangest of problems:
My mouse doesn't work as it should - sometimes clicking on something doesn't do anything, sometimes it does something different, as if some altering keys were pressed - eg sometimes clicking on a tab in a browser will close it (with left mouse button).
I have tried to locate and update new drivers for my keyboard and mouse, since these are my guesses for what could be causing this, but couldn't find any driver for the keyboard and the driver for the mouse didn't change anything.

My mouse : Trust MI-6970C Laser Mouse
My keyboard: Genius KB-G265
I'm running Win 7 Professional

I can't think of any changes that I did at the time this started happening, so I'm really at loss.
Thank you for any advice on this.

A:Mouse and Keyboard acting strange

Try them with another computer. If they both work OK suspect either a hardware problem with your computer or a possible malware infection. It could also conceivably be a Windows problem but the other two possibilities are more likely.
Relevancy 21.93%

ALL I did was replace the almost dead batteries & now its a pita to click on something.
Its like the cursor is on ice, I move it up to click on a bookmark & it slides on by & I have to s l o w l y move it into the area.Its a wireless Microsoft mouse.

A:Odd wireless mouse behavior

Open Mouse by clicking the Start button , clicking Control Panel, clicking Hardware, and then clicking Mouse.
Click the Pointer Options tab, and then do any of the following: To change the speed at which the mouse pointer moves, move the Select a pointer speed slider towards Slow or Fast.
Relevancy 15.05%

Hello all...I'm having problems with my Dell PC. I just purchased a sweet new scanner (ScanSnap SV600) and when I scan a lot of pages at once, I get an error message saying I'm out of storage and to restart the computer. The specific code given is 0x8007000E. I've also been noticing when I run a few web tabs at once, sometimes they just go black and I need to restart the browser. It has 8GB of RAM and all the drivers are updated. Anything I'm missing? Thank you kindly!

Dell Optiplex 790
[email protected]
Win 7 Pro

A:Memory Problems?

How much storage space do you have? From what I could research this error is tied to programs demanding a great deal of memory. You say this occurs when trying to scan a lot of pages at once. Does this occur when scanning less material at once? Have you tried updating your drivers for the scanner?
Relevancy 14.62%

See picture below. Any ideas? Ive cleaned the rollers, and the main charger, and pretty much anything else I can find in the copier. Havent replaced the toner cartridge though. Originally there was toner all over the place and the dotted line was a solid black line. Performing the aforementioned maintenance items got rid of the thick black line but now this remains.

Any help is appreciated
Relevancy 21.93%

My usb mouse is connected, it's led is on, but it's not moving the cursor at all.
I tried unplugging and plugging it in every usb port I have but still not working.
Strangely keyboard 100% works and usb drive works too
Help me.....
I tried another mice that's 100% working on my other computers and they all won't work.
What should I do?

A:Mouse problem

I would have a look in 'Device Manager' at the line 'Mice and other pointing devices'
Click the small arrow to the left of that line, to get the next line to show, below it.
Right click on that, and choose either 'update driver' or 'Uninstall' and then reboot your pc, with the mouse connected, and Windows should install the driver for it again.
I'm assuming this is a Microsoft mouse, if another type it might need it's own driver which should have been supplied with it, but it would be very unusual not to work in Windows at all, whatever the maker.
Relevancy 15.05%

I seem to have quite an annoying problem with my new 256gb razerbalde. Whenever I launch a game I get a black screen the sound still works but no response from the screen, I have to put it to sleep and back on again and it works even though sometimes I need to do it 10 times or so. I have updated to all the newest drivers and tried a secondary display through hdmi it gives me the following error message: failed to initialize renderer. Unknow error creating the renderer. I only tried launching skyrim so far. The error seems to happen sometimes but not often when I will start the laptop and the screen will be the same. It's more of a black/greyish color and you notice that it is on.
Any help will be of great use. If the post already exists I am sorry and would be happy to get the link.
Relevancy 15.05%

I'm having trouble staying on line with telstra connection my internet keeps freezing and dropping in and out I have had trouble with my home line phone and have a bullion modem which this isn't the problem, the problem I believe lays with telstra as I've checked with my server and with downloads and updated my PC so what can I do next.

A:Having problems with connection dropping in and out

June Lomas said:

what can I do next.Click to expand...

Call Telestra
Relevancy 15.48%

I have been having quite a few issues with the motherboard I have from ASRock. It is the Z87 Extreme4. My issue is the usb 3.0 No matter what I plug in it says this device can perform faster than this blah blah blah. Anyway, that should not be happening as I am plugging in usb 3.0 devices. What is going on? The other problem is that my front ports that are from the mobod header will no longer recognize any of my external 2.5 hdd. 1 on the back also says this so I am limited to just 3 ports on the back that I can plug into with my external hdd and they are very important to what I do. Is anyone familiar with this? Is this only on this board or a common thing among ASRock? I have other computers and the usb 3.0 works just great.

A:USB 3.0 Problems

Have u Installed the drivers? I do not know any thing about ASRock but lots of USB3 have to have the drivers.
Relevancy 15.05%

I have been experiencing some serious FPS problems with my Laptop recently. I Used to run games at somewhere from 60-120 FPS, but now its dropped down to 5-14 FPS. It happened recently. A couple days ago on Saturday Oct 4rth, I was playing Team Fortress 2 on Steam. I shut off my computer to go to sleep for the night and when I turned on my computer the FPS problem started almost immediately after I turned on the PC. Its not just Team Fortress 2 either, Its happening to all of my other games also. I am not sure on what to do and the only though that comes to my mind when I wonder what the problem could be is a virus. (I have virus protection Webroot but I'm not sure if it works to well.) I might have to Factory Reset my computer, but I want to try different solutions before I Factory Reset. Any Ideas?

My Laptop Info:


A:FPS Gaming Problems

Back up your important data and do the Factory Reset. Apply all the Windows Updates, and then try your games. Webroot is not an antivirus program. Try installing MSE:
Relevancy 21.5%

Hello guys..I have a same a problem..I cant play any of my mouse in my laptop..can u help me to fix it..thank you so much.

Moderator note: Moved from this thread:

A:Can't move my mouse, but computer is not frozen

You can't use any USB mice in your laptop? How many have you tried?
Relevancy 15.05%

Hi all. Well I am having problems with turning on my Toshiba satellite c50-a-19t laptop. The night before there was a smell coming from the fan so I turned it off. I put it on charge in the morning and when it was fully charged I went to use it. The white light on the front goes on for a sec and then goes straight off and the laptop don't power up. Any ideas guys ???

A:Problems with laptop

Sounds as though it may have over heated and something may have shorted out. you will need to have it looked at your local repair shop.
Relevancy 15.05%

Everytime I plug in the Ethernet cord to the router. It lights up and doesn't blink. After a couple of seconds, it just goes dark and I'm unable to use the router.

It works from time to time (I always have to unplug and it replug it back constantly) and I tried plugging in the router without the Ethernet plugged in and it looks like it works fine (Lights blinking). I plug in the Ethernet after that and it continues blinking for a few seconds then it darkens.

It's a Linksys router. WRT5462 V1 (Cisco)

A:Router problems -_-

Have you tried more than one cable? The cable could have gone bad.
Relevancy 14.62%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp
Relevancy 15.48%

Hey so I wasn t really sure where to post this as I am quite new to the forums but here I go So my first problem is with my laptop s adapter charger not really sure what it s called in english it no longer charges as in the tiny green light no longer turns on when I connect it to problems Two an outlet and yes I Two problems have tried more than just one outlet It s dead From what I ve read on the web I suppose the only way out is buying a new charger Or trying to open the charger box and fixing it Is that possible If so any tips on how to do that - My second problem is releated with the internet modem I have cable internet and after this storm a coupel of days ago it started playing tricks on me even though the cable is plugged into the pc and the modem is working for about a whole minute my pc says that the cable is unplugged and only after that does it recognize it and connect me to the internet Any ideea what s wrong I suppose there s fault in my modem because before when it worked just fine about three green lights turned on right after turning it on but now only two do the dsl and power one I don t know fpr sure but I think the third one used to be ethernet And that s about it If anything s unclear please ask english is my third language so I might have made some mistakes here and there thanks for your time nbsp

A:Two problems

DO NOT open that "charger box." It is dangerous to do so because it can hold a charge of electricity for quite some time. Either buy a new charger from the laptop manufacture or, if you can, purchase a new charger from the likes of Targus. I have a Lenovo laptop and bought the Targas brand as a back-up. It works great and Targus supplies several adapters to work on many different brands.

Secondly, was your modem and router plugged into a surge protector or do you have them plugged directly into the outlet?

Your English is quite good.
Relevancy 15.05%

Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help

A:Dvd burner problems...any suggestions

They are so cheap now it is probably worth everyone's time to just get a new one.

If you really want to troubleshoot it, put it in a different computer or OS.
Relevancy 15.05%

Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
Relevancy 21.93%

Hi! I usually post over in the malware/viruses section, but I don't ...think this is virus/malware related? That is, my mouse has recently (within the past week or so) decided that it's going to start double-clicking, which is something of an irritation when dragging/dropping things, or when playing video games of any kind, mostly. I don't think this is malware/virus related, since I've run my malwarebytes/MSE scans and found nothing; I've even run malwarebyte's anti-rootkit to see if it was just something strange going on there, and found nothing, too.

My mouse is a few - about six? - months old, and it doesn't really have any issues aside from this, nor have I had any problems with it before now. It's an E-blue Cobra mouse, and googling doesn't seem to be terribly helpful as far as "Go ___ for new/updated drivers!", so I'm sort of stuck on that front, too.

Anyone have any suggestions/fixes they know of that might help?

A:Double-clicking mouse

Have you check in the control pane. Under folder options? Once you click on this and the window opens. Look for ( Click Items as follows) Here it will give you the option to single click on Items or double click. You should be able to change your settings there.
Relevancy 21.5%

I'm looking for a decent ergonomic mouse to help take stress off my wrists while they heal and I'm wondering if anyone has any recommendations. Ergonomic keyboards are also on my list, but I will be unable to get them at the same time. I'm willing to go near $40 for one if that's necessary for a decent one, but I can't get them both at the same time due to a strict budget. I'd be happy if anyone could help me out. My only exclusions would be something being shipped directly from china Thanks

A:Recommended Ergonomic Mouse and Keyboards?

I like the Logitech Wave keyboard and mouse combo. Together, they go for $50. The MS ergonomic keyboard also seems fine looking at the reviews, but I haven't tried it personally. I would google, "Best Ergonomic mouse and Keyboards" and see what they recommend.
Relevancy 21.93%

I am unable tomove my PS2 mouse. I tried reebooting my pc by plugging and unplugging my mouse but it doesn't work. my device manager is not listing the mouse option.

A:My mouse is frozen

Have you tried using a different mouse to see if the mouse is the problem? How about trying a USB mouse to see if that works? You say you tried re-booting the pc by unplugging and plugging in the mouse, does this mean that you simply unplugged the mouse or did you actually try shutting down the computer and re-starting it (the proper way through your Operating System)?
Relevancy 21.5%

Replaced the mobo (Gigabyte GA-78LMT-USB3), CPU (AMD FX-4300 Vishera), and RAM (G-Skill RipJaws 4MBx2) in an older system running WinXP (planning to upgrade to Win7 ASAP). Everything booted up just fine, but the HP keyboard and the Logitech mouse, both of which which work fine on another computer, aren't being recognized at all by the computer. No error messages, just not working. Not even lighting up. We've tried every USB port on the system, and even used a USB-PS/2 adapter to try it that way, to no avail. I'm out of things to try. My only thoughts:

1. Could USB be disabled in BIOS by default? If so, how do I change that without a keyboard and mouse, when I can't even access the BIOS?

2, Could the USB system on the new motherboard be defective? How do I test that?

3. Is there any possibility at all that it's related to the Antec 500W PSU--perhaps not enough wattage for this system? (Hard drives are all pretty old.)

A:USB keyboard and mouse not working after upgrade

Create and boot from a Knoppix Live CD (just google to find and download the ISO). If USB still doesn't work when you boot from knoppix, you know it must be either hardware or BIOS issue.
Relevancy 21.93%

Hi there,

My mouse cursor freezes once every ~30s for about 1~2s. It doesn't happen all the time, but I suspect it might happen because of the usage of postgreSQL, as I've seen 2 other people with the same problem who also used it.

I have tested another mouse, the problem persists. I've tried updating mouse/USB drivers as well, nothing helped.

My trackpad, however, doesn't stop working at any time.
Any ideas?


A:Mouse cursor freezing

Interesting how when you tested another mouse the issue persisted, but it works with the trackpad. Are both mice you tried (non-trackpad) wired or wireless?
Relevancy 21.93%

I just got a new system that is rather light on the USB ports, so I figured I'd take advantage of the built in bluetooth. That being said are there any bluetooth mice that the users of Techspot either own and like, or find appealing? I tend to like my mice full sized and being contoured for the right hand is a bonus.
Relevancy 21.93%

I was thinking of getting a used death adder off ebay. Are their any new mice for 30$ as good as a death adder? With 2 side buttons?

I was looking on newegg but most mice don't tell you their response time, death adder has 1 ms. idk it seems like if I am not buying razor I am gettting crap.

How about 60$?

A:Gaming mouse for $30?

A lot of razer mice are pretty junkie to be honest.
There are many deathadder and razer fakes in general on ebay, so look into it, it's very common (for new ones). Obviously used ones could just as well be fake, and the seller may not even know it.
The fakes are not bad though I hear.

Most mice can support a polling rate of 1000hz.

Some good mice with good sensors in that price range are Razer Abyssus, Logitech G100s, Roccat Savu, Zowie Mico, and CM Storm Spawn.
Most of those mice use the Avago 3090 with a fairly well implemented ROM AFAIK, but I don't have any myself except the Abyssus.
AFAIK the polling rate on all these mice can be set to 1000hz except the G100s, which is 500hz max.

Sorry there aren't a lot of side buttons available at $30, but the mice I listed above have top performing sensors for a good price.
Relevancy 36.12%

I have a toshiba satellite pro and usually use the touchpad with my right hand rather than a mouse. I attached an external mouse for my daughter to use, and changed the settings to lefthanded. I disconnected and shut down. Since then, each time I restart the computer, the touchpad does not work correctly. Instead of double clicking on the touchpad, I have to rightclick. I have to go into mouse settings on control panel, and move the double click speed, click apply and then the touchpad works correctly then. Why is this? Please help.
Relevancy 15.05%

Hi So my HTC just old Nokia Problems 7360 spare with got stolen so I had to dig up my old spare phone it s a old Nokia and it works somehow I can call and I can txt but I can t save any new contacts it just says something like quot forbidden action quot anyhow I can t copy old contacts from the Problems with old spare Nokia 7360 phone to the sim card I can t delete old contacts so I was going to reset the whole thing but I have changed the security code by default it should be and I can t remember what I have changed it to and yes I have tried all the possibilities that there are So what to do -any ideas P S It also says that the memory is full and it can t save any MMS WAP what nat settings EDIT Have got it connected to the computer now with a data cable and using Nokia PC Suite and I made a backup of everything just in case but Problems with old spare Nokia 7360 it failed to backup the contacts so I tried to just open and view all the saved contacts but it just fails Anyhow I m not really interested in the old contacts so I don t mind but when it fails to read the contacts it also fails when I try to add new contacts via the computer Next step was to download Nokia Software Updater that s also what the PC Suite suggested but it can t quot find quot the phone when it s connected So what next -I could send it to Nokia so that they there would flash it but then if there is some other problems with it it would cost a fortune and it s not worth it nbsp

A:Problems with old spare Nokia 7360

You need to go in the nearest nokia care point at your place. You can also go to unauthorised repair shop for reformatting or reflashing.
Relevancy 15.05%

Hello, yesterday I was using my computer and I shut it off. When I came back a few hours later, the wifi couldn't connect, and, unlike most times life this, it displayed an ethernet symbol with a red 'x' opposed to the normal wireless symbol with an 'x'. My computer stopped connecting to any wireless, though works fine with ethernet.

It is a Lenovo Ideapad with Windows 8

I've tried rebooting (I'm clueless, but not that clueless), updating the OS, uninstalling and reinstalling the computer's drivers along with some more far-fetched stuff (I got desperate) such as removing the battery, waiting a few hours, and plugging it back in, but nothing has worked.

If anyone can help, that would be amazing, thanks!

A:Internet problems on my Lenovo

trekzone said:


Seems your WIFI adapter is being disabled. try enabling the device in your device manager or with the Fn+function key provided in your laptop.Click to expand...

That doesn't seem to be the problem, the adapter is enabled and the computer is not in airplane mode
Relevancy 15.48%

I recently bought a new Motherboard for my PC, it is a GIGABYTE GA-F2A88XM-D3H, it has a USB 3.0 plug in. However even though I plugged my USB 3.0 plug into it I still have no use. These are my front USB 3.0s, although the sound and mic work fine in the front. I currently am using a Windows 8 64-bit computer and have all drivers up to date, I am wondering if there is a way to turn it on in the BIOS.

A:USB 3.0 Problems

It seems to me like you are plugging the USB 3.0 device into the front of your case. If they are not working, it means you probably never connected the USB 3.0 header plug from the motherboard into the case plugs.

This is what I am talking about BTW:

Just to clarify though, you are trying to connect your device using the front case USB plugs? Also, if you plug the USB 3.0 device into the motherboard directly (in the back of the case), does the device work?
Relevancy 21.5%

Hi mouse and responding after Keyboard not bootup Its been a while since I last posted here boy has this site changed I generally know how to fix my pc problems when they arise and if I dont google has been my friend but I have ran into something that has me banging my head on the desk My pc that I built just over a year ago or so has been running smoothly until today I woke up from a nap and booted up my pc and neither my mouse or my keyboard would respond My microphone is also plugged in via USB the light on that is on as with my caps lock key on my keyboard but my mouse light will not turn on after I tried unplugging and replugging it Please note Keyboard and mouse not responding after bootup I am unable to enter bios since I cannot get my keyboard working I also am not able to run in safe mode because that also requires keystrokes Keyboard and mouse are in good working order as I am using them now on my Keyboard and mouse not responding after bootup secondary PC one that got replaced to type out this thread I took these steps unplugging the USB connections and re-plugging them back in - no results - restarted pc - no results unplugging the USB connections and re-plugging them back in in different locations - no results Keyboard and mouse not responding after bootup - restarted pc - no results unplugging USB mouse and used the USB to PS adapter to plug it back in via PS - no results - restarted pc - no results So now that I am unable to get into bios or safe mode what are my options I was thinking of just trying to re-install windows but only as a last resort Thanks in advance I dont think my current system specs are needed to help fix this issue but I will include them just in case to save you guys time Processor Intel core i Motherboard ASRock Extreme X Cooling NZXT Kraken X Memory Geil Enhance Corsa DDR GB Video Card s EVGA SuperClocked GTX Titan Hard Disk s OCZ Vertex GB SSD Toshiba TB HDD Optical Drive ASUS External BR Burner Power Supply CoolerMaster Silent Pro Hybrid w Software Win Keyboard CoolerMaster Storm Mechanical Mouse ROCCAT Kone Pure nbsp

A:Keyboard and mouse not responding after bootup

Nvm for now, it seems to be working now, but not with my mechanical keyboard, I reverted back to an older usb 2.0 keyboard and now it and my mouse both work fine.

though, my mechanical keyboard does work fine on my old pc.

so still a lil confused on that.
Relevancy 21.07%

When I play windows media player or any other mp3 player my pc begins to slow down a lot and mouse stutters and my internet webpage closes :/ any help please?

I've posted my IRQ

A:When I play music my PC starts to slow down and mouse stutters

What are your system specs?

Some possible solutions: Make sure Windows is up to date. Try updating your sound driver (post your system specs and I will show you how to).
Relevancy 15.48%

I recently bought GLADIATOR R7 260X Intel i5-4570 3.6GHz Quad Core Next Day Gaming Pc - Aria PC from Aria,it comes with CORSAIR CX series CX430 430W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply - and every so often the monitor goes off which I think may be due to a lack of enough power. Would it be beneficial to change to a Antec TPQ-850 850W Continuous Power ATX12V / EPS12V 80 PLUS BRONZE Certified Modular Active PFC Power Supply - that I have spare?


A:Possible PSU problems

If you have the PSU as a spare, there is no harm in using it to see if it corrects your problem.
Relevancy 15.05%

I have a laptop with the Realtek high definition audio and Dolby home theater installed. After the latest win8.1 update the Realtek program has stopped forwarding the sound through the Dolby program (which it managed to do perfectly before the upgrade). I tried using Viper4Windows too but that didn't work eighter. Is there an option anywhere that will allow me to fix this?

A:Realtek and third party program problems

Are there any yellow (!) in the device manager?
Relevancy 15.05%

After upgrading my MacBook Pro with Maverick, Audio Hijack Pro pretends not finding the source application for recording. Anyone the same problem?
Relevancy 15.05%

Are you having a problem with your Internet connection or Wi-Fi? Whatever the problem ? from a flaky connection to Wi-Fi troubles or even no access to the Internet at all ? some router troubleshooting could fix things.

Some of this also applies to your modem, although many Internet service providers are handing out combined router-modem units these days. Your wireless router and modem may actually be the same device.

Reboot the Router Read more
Relevancy 15.05%

I have the router of my isp and to have an extended range of the wifi we bought a new router which has a bigger range of its wifi now my brother is connected to this router and the other router is connected into mine which means it is taking the bandwidth of my router now the problem that im having is that when my brother seems to be uploading a photo or School stuff onto the internet my internet keeps disconnecting and lagging which probably means that his uploading is literately draining all mine up and im left with nothing isnt there a way to fix this or to cap the upload speed/download

A:Internet problems

QoS settings on the main router.
Relevancy 21.5%

Just got the new mouse home, but to enable aim precision and other programmable buttons and need to get the drivers. When I try to download them it says plug in the device, which is already plugged in and I have also tried in different usb ports and safe mode. Anyone with this mouse got it to work?
Relevancy 21.93%

Hi so yesterday, after I plugged my mouse back in after a night of it being unplugged.. it stopped working
2 out of 4 usb ports get the red light to come on but the mouse wont move cursor or click.. its not showing in device manager either and nothing shows any problems in device manager

A:Usb optical mouse not working

Uninstall it from device manager, try again after a reboot.
Relevancy 15.05%

Hey, today i just got a new 4gb memory stick to add to my computer, currently i have 2 2GB DDR3 1333 RAM sticks.(These were both Kingston Memory Sticks) I then added a 4gb DDR3 1333 Ram stick (Crosshair) to the motherboard and made sure they were firmly placed in and it was all fine, I then turn on the computer and find that the motherboard starts beeping once then two beeps after and the Screen is blank, and my mouse & keyboard aren't responding. My current OS is Windows 7 64 Bit, so i shouldn't have a problem installing new ram to my system...
I'm not sure if this is a problem with 2 different brands of sticks or what.. but the fans are running for my Graphics card (I don't have onboard graphics available)

AMD 1055t X6
ASUS M5A99XEVO Motherboard
ATI Radeon 5570

Any help anyone? Thanks

A:Problems with RAM installation

The motherboard does not like that 4GB module. Have you tried the 4GB by itself? If the 4GB module won't run the computer you'll have to stick with 2GB modules. How many memory slots are on the motherboard? ASUS motherboards are notorious for being very picky about memory
Relevancy 15.05%

OK where to begin Alright I got this new tower that is a decent custom rig I have been having problems with my HDD tb movies music etc and SSD gb OS Games basic running files randomly dropping out The HDD always goes sata Possible problems first I know it happens because I get a pop up from Utorrent saying the file save directory cant be found or there is an error with it I download movies ebooks etc Thats usually the first clue My Asus quick storage will pop up saying a drive has been disconnected then straight away it is found but it is unknown I can see the files in the HDD through my Computer but cant actually Possible sata problems access them I cant resolve this without a restart Now chance of after the restart wether the SSD goes aswell thus my OS A powerdown for a little while usually fixes this Longest wait time mins for a system go Then its all fine and dandy like nothing happened I have checked Possible sata problems connections and cooling psu and Possible sata problems its new so its clean no dust I power down the system most nights out unless I really wanna d l something for the next day It has stock OS with Minecraft Dayz Halflife and Portal installed and I have DLed about tb of previous torrents that I have already dled from trusted supplies with avast installed the expensive one not the free version Apart from that stock Anything else I can tell you to try to help me troubleshoot this please just ask System specs Case Corsair D Full Tower Cooling Corsair Hydro Series H i Liquid Cooler for CPU CPU Intel Core i - K GHz Quad Core LGA Motherboard Asus Z -Plus ATX Memory RAM Corsair GB Vengeance Pro Mhz Video Card x Nvidia Geforce GTX ti Hard Drive Samsung Series Pro GB Hard Drive Seagate Barracuda TB rpm CD-drive LG Blu-ray rewriter combo Power Supply Corsair HX Modular Watt Plus Gold Operating System Windows Professional edition bit And not on here a couple of additional fans Thanks in advance for any help nbsp

A:Possible sata problems

Hey Zac. Since it comes back after a power down and brief rest, to me it sounds like a heat buildup problem, maybe even with the CPU. Has the builder checked it out?
Relevancy 21.93%

Hello all.
I tried both of Kolavec's fixes. Neither worked.
I've also tried keeping Youtube and Task Manager open to check which process was doing the damage...
It seems that keeping Task Manager open stops the video from lagging (also tested on IE 11.0.2).
This antidote, sadly, doesn't extend to games.
This thread was created by someone with the same problem who seemed to have found a trojan responsible for the slowdown. Any and all advice would be appreciated.
PS. I'm so relieved that there are recent thread on this topic! Thank you (and I share the pain of every sufferer).

Following the advice given in linked thread, I found an executable file "vpecyihvyphx.exe" that started upon leaving the mouse idle and disappeared when I moved the mouse again. I await any guidance/ recommendations you have for me.

I just downloaded and ran MalwareBytes Anti Malware (Free) and it seems to have done the job for now. I'll keep you all posted and I hope this helped some of you.

Moderator note - Post moved from this thread:
Relevancy 21.5%

I got this same problem with videos in youtube and such. One quess was that it was a bitcoin miner. Any one know how to get rid of it? My antivirus can't find it.

A:Videos/games lag when i don't move my mouse

Open Task Manager to the performance tab. Leave mouse idle. Does CPU usage rise?

If yes, hit PRocesses tab, and take a screenshot of which process is taking up CPU time.
Relevancy 21.93%

Hi everyone I m looking for a mouse that has a very nice sensor without acceleration but with a few specific DPI settings I d like a native DPI setting and a DPI setting Mouse Suggestions a little higher up to may be okay but is preferable That s about all the requirements throw at me anything that fits I know a lot of decent laser Mouse Suggestions mice can fit that but AFAIK they all tend to have some sensor flaws Aside from that everything else is pretty flexible but here s what I prefer A couple DPI profile settings Light is preferable Not a large mouse Mouse Suggestions medium small A couple side buttons As for the shape I d have to look at the mouse or Mouse Suggestions try it out to know if I ll like it or not I like the shape of the Roccat Savu and Kone pure In fact I almost picked up a Kone pure for on black friday but the Avago held me back I d also like a pretty slick mousepad to go with it something at least as quick as a Razer Goliathus speed I use about cm so it needs to be a medium sized mat Thanks for reading nbsp

A:Mouse Suggestions

I have a Razer Deathadder 2013, it has DPI settings which can be changed in the software from 100 DPI up to 6400, the lights can be turned on or off and it has 2 custom side buttons which can be changed to do whatever you want. I have a Razer Goliathus speed medium mat which is very good and it feels high quality. It is a good size for my hands but I do have quite large hands but I think once you have used it you won't want to go back to a smaller mouse, I sure don't anyway. That's my personal opinion but it's about how it feels to you and has all the features you need.
Relevancy 15.05%

Last night all of my wireless devices (kids computers, laptop, IPad, and Wii) suddenly stopped working. The only thing I can seem to come up with is to unplug the router and let sit for a few minutes to see if that corrects the problem. It has not.

What else do I need to do to get my wireless connection back up and running?

A:Wireless problems

That was a good try. what was going on for all your devices just before you lost connection?
Relevancy 21.93%

I am using a standard microsoft wireless mouse, that has worked fine for as long as I've had it, but recently I've noticed that when I'm playing a game, I'll get major lag, but then one time I tried using my mouse PAD and I have absolutely no lag. Is there a problem with my mouse? Or just a graphics problem. Help would be appreciated.

A:Mouse lag when moving around in games

Wireless mice have been known to cause input lag while gaming. Try a wired mouse and see if it works; if it does, then the problem was the wireless mouse; if it doesn't, theres some other problem and idk without more info.
Relevancy 21.93% That's my problem. When I move with the mouse, it doesn't move straight; it shakes. I'm using the Feenix Nascita right now. I was using it for about two weeks and it was fine, then all of a sudden I noticed this problem. I tried two different computers, I've tried with and without mousepad. When I use my table it works better than on the mousepad, but if you look closely it's still a problem. I have no idea what's causing this. I even sent this back to the company and they said they didn't get the problem. They returned it and I still have the problem. I've blown on the sensor, tried different DPIs, and different USB ports, nothing helps.

A:Mouse shaking problem

Hi, SadMango. I may be able to assist you with your problem. When I purchased this mouse I noticed that it came with a pair of "stick-able" mouse feet that attach to the bottom of your mouse. When I attached these pads I noticed that my mouse movement became very scratchy. I removed these pads and the mouse was back to normal. Try this out. I hope it helps!
Relevancy 14.62%

Hi I have the same problem message quot An Operation was attempted on something that is not a socket quot etc appeared Also my Node Type is unknown I tried all steps mentioned above and I never made it to have Node Type hybrid It appears to be unknown even after adding node type and value And about this quot You should see a complete set of TCP values and using IP problems connection Limited with release/renew the command Prompt ping nslookup quot I got something completely different it says for nslookup that default server is not available server unknown cant find server for address etc Any idea how can I try to fix Limited connection with IP release/renew problems problem It all started with Limited connection with IP release/renew problems IP address conflict Once it was solved thanx to this cmd netsh int ip reset resetlog txt netsh winsock Limited connection with IP release/renew problems reset catalog But it does not work any more It shows that local area network is connected and there is still message about IP address conflict Many thanks in advance Moderator note Moved from this thread http www techspot com community topics limited-connection-with-ip-release-renew-problems nbsp

A:Limited connection with IP release/renew problems

It's a little difficult to pin down what your problem is without knowledge of your network and router setup, but IP collisions and connection issues that get fixed temporarily with release and renew are usually related to misconfigured DHCP settings. Such as when two routers are distributing IP addresses to the same range of systems, or when some devices list static IP address, or sometimes if a wireless device is also plugged in with a network cable, claiming the same IP address with both connections.

if you ping those google dns addresses (, or and you get errors instead of replies it just means your not connecting to the internet.

Like I said though this is generic stuff and no one will be able to be more specific until you describe a bit about your overall network layout, and types of connections.
Relevancy 21.93%

Basically when I move my mouse (just a generic "optical mouse") I get a static sound though my headphones and speakers and people can hear it when it skype with them, unplugging mouse fixes it and it only occurs when I move the mouse. What could be the problem? Side note: This is my Dad's PC, trying to fix it for him with your help of course.

A:Static when moving usb mouse

Try a different mouse.
Relevancy 15.05%

I have been having problems connecting my laptop to the internet over my home's wifi network. Other wireless devices still connect no problem, but since Thursday I can't connect with my laptop. I have tried numerous solutions culled from google, but nothing has worked. My most recent attempt was from this forum so I decided to try here first for a solution specifically for my situation. I have an Asus i5 Windows 7 computer with a netgear wireless router. My laptop says it connects to the network (wireless router shows this connection), but it shows no internet connection. I have used my cell phone as a wireless hotspot and the laptop is able to connect to the internet that way. I used a LAN connection to assure myself that the laptop could connect to the internet and it did just fine. I am at a loss and frustrated beyond belief. Any help would be greatly appreciated.

A:Problems connecting to internet on laptop

Did you get this issue solved?
Relevancy 15.05%

Hi guys ive got a tricky one here, Ive recently run a cat6 straight through cable to a separate dwelling from the main house to my EVG2000 Router modem. the Cat6 cable is connected to the main house at another EVG2000 router modem. The problem I am facing is My laptop(s) and computers can connect wirelessly with internet access fine but my galaxy S4 phones, iphone, ipads and xbox's connect to the new router in separate dwelling but have no internet access how ever they work perfectly through the main house's router fine. I've tried power cycling both modems, tried different ports. I have not tried to forward any ports as of yet as I have little experience in doing so. Hope you guys can help cheers

A:Netgear EVG2000 Router problems

Hey firz3h. I think I follow you, correct me if I'm wrong. Your internet connection comes into the main house and goes to the EVG2000 wireless modem/router combo. You ran a line from this unit to the separate dwelling and it connects to a second EVG2000 unit, is that so?
Do you need both wired and wireless capability at the separate dwelling or just wireless capability?
If both are needed, a wireless router should be able to have it's DHCP function turned off so that it acts as a switch which will enable you to connect 3 devices by Ethernet. On the fourth LAN jack, I would connect a WAP (Wireless Access Point) which should give you a wireless signal . It might be easier to just get a 4 port switch instead of trying to disable the DHCP function of the second router. DHCP assigns IP addresses to the devices that try to connect, and using 2 on the network will cause issues. I think this would work, correct me if I'm wrong folks.
Relevancy 21.5%

Recently bought a MS mouse.

Have found that when I move the scroll wheel up or down more than really slowly
a little round icon appears with an up arrow and a down arrow. If the cursor is
above the icon, the page automatically scrolls upward without stopping, and the reverse for the cursor being below that icon. It starts without warning and always goes farther than I want and it goes so fast it's difficult, at best, to react to it before I'm way past what I want to see.

When I click, the thing goes away.

Any way to totally delete this annoying feature other than throwing the mouse away and
getting another Logitech?


A:Microsoft mouse scrolling so annoying

Wow I know that feeling. I had a MS mouse that did the same thing. Never could figure out how to stop it from doing that. I search over the internet and never found a answer. Even tried its support site. I ended up getting rid of it and going back to a Logitech.
Relevancy 21.93%

My mouse quit working, keyboard still works when I plug in to USB port it says device malfunction, mouse works on other computers. Can anyone help? Thanks

A:Mouse problem

Go to device manager, find all USB devices (including 'hubs), right-click, uninstall. Unplug everything USB from computer, restart (via power button, since mouse/kb won't work).

You should get the "installing driver" balloon on bottom-right when Windows loads. Plug devices in one by one, making sure they all connect and register successfully.

If that still doesn't work, do the above again, but at the shutdown part do this: pull the power plug, clear CMOS (small battery, google it), press power button to clear residual energy, then boot it up and continue.
Relevancy 36.98%

Has anyone this problem or know how to fix it. When switch on my computer the mouse & keyboard do not work. If I then remove all the USB cables it will then work ok, after a few reboots. I am running Windows 8 64 bit. Would appreciate any advice.

Relevancy 21.5%

Anytime I watch online videos, or play games w/ my xbox 360 controller the video lags after about a minute passes and I have to move the mouse to make it stop. It's really annoying when I'm playing video games and it throws me off.
Relevancy 15.05%

So this is my current situation.

I don't know why my download is so low, sometimes it's skyhigh (~60mbps) and sometimes it doesn't even make the 1 mbps I'm hooked on straight to our main modem I even put off Wi-fi and everything and I still have around 5mbps please help

A:Having problems with my download speed

Contact your ISP and tell them your download rates are fluctuating. They have ways of testing for problems with the lines.
Relevancy 15.05%

I'm not sure why but the sound on my advent laptop seems to be stuck on mute. It plays event sounds, email arriving, closing down etc., but won't allow music or video to play sound.
It's running on Windows Vista and I've tried Function +F5 and F6. The speaker icon, bottom right screen, has the mute symbol'x' by it. When I right-click it denies any audio facility exists.
Please help as I'm stuck in France without a TV.


A:Sound problems on Advent Laptop

There is probably a program conflict that occurs some time after boot up. How old is this laptop?
Relevancy 21.93%


My mouse just died so I need a new one, but I have no clue what mouse to get. I came of a Gigabyte GM-M6800 so every gaming mouse will be an improvement. I have fairly large hands so a big mouse would be a big plus. I did some research and the roccat kone XTD, cyborg R.A.T 7 and the Razer Lachesis are nice sized mice. But I have no clue which one I should get and which is the most durable.
Help is appreciated.

A:Which mouse is the best for gaming?

Well, I personally like Logitech. But I have never had a true gaming mouse, but I am planning on building a new PC and have been researching peripherals for the past few months. No luck with a keyboard, but for the mouse I decided that I wanted to get the Razer Deathadder 2013. I would recommend a Logitech G500s, but reviewers say that it isnt much of an improvement over the original G500. The Deathadder 2013 has a braided chord, which makes it more durable. But it isnt a laser mouse. But that isnt a big deal since its 4G sensor is plenty good. Make sure you get the 2013 version, since the older version hasnt been updated since 2006.
Relevancy 14.62%

I recently bought this board(1 week ago) and noticed after installing windows 8 with all the drivers from the disk, that all my USB ports randomly started having problems recognizing certain USB devices such as a wireless dongle and a few wireless mouse and keyboard combos. There were no problems with any USB-storage devices. There are no yellow marks in device manager. I have updated the drivers, to what was on gigabyte their website, but it didn't workout. Did the same after installing Windows 7 to no avail. Have done some research and it seems there are problems regarding VIA VL800 chipset. I disabled it and it seems to help. Although it might not be the case, cause I've only tested it for 2 hours now without problems. But that means there are 4 USB3.0 ports on the back I can't use. Any suggestions please. Thanks in advance

A:VIA VL800 chipset for USB 3.0 giving problems on my Gigabyte Z77x-D3H

You dont wanna disable a chipset. That is the basically the heart of the PC. The CPU is the brain and the chipset is the heart. Without it, a lot of things can go wrong. I cant seem to find USB3 drivers on the Gigabyte site. Usually when I give poeple drivers from new machines, there is usually a USB 3 driver. Pretty odd. Head on over here and install the chipset driver: On the site it is listed as "Intel INF installation". If this doesnt work, I would recommend sending back the motherboard with a complaint about USB 3 not working. Never install drivers from the disk by the way. Also, the chipset driver I provided may not be 100% up to date, but I am pretty sure it is. I would give you the Intel version that may be more up to date but their download section is down.
Relevancy 21.5%

Hello Thanks for reading and I know this problem has been on here one too many times but im just very curious as to asking these certain questions before progressing onto what I think I should do My problem is that I New signal. Card. nonfunctional No Mouse and Keyboard recently bought a HIS IceQ mainly for the cooling system it comes with Now I had installed it carefully no static shocks nothing like that into my PC Now when I boot it up I get no signal and my keyboard and mouse are New Card. No signal. Keyboard and Mouse nonfunctional getting NO power at all Now the curious part my pc came with a HD Thats it No VGA output on my motherboard Which makes me think do I need to change something in BIOS Does my PC only detect that because it came with it And yes I plugged in the PCIe power connecters too Now to what I think I should do based on reading through the forums Cmos Reset New PSU And thats basically it Here is a detailed Spec list Name HPE Phoenix HD gb DDR AMD FX Ghz x Ram DDR ThermalTake TR w PSU Motherboard is a Gigabyte AC model BIOS is AMI Ang TB hardrive ANY help is very much appreciated Ive been on this problem for a while now Thanks nbsp

A:New Card. No signal. Keyboard and Mouse nonfunctional

Sounds like a bad connection somewhere. Make sure everything is properly fitted and in the right place. When you replaced the GPU - Is that the only component you unplugged and removed? Try putting in the old card to see if it works. If it does, you could have a bad GPU.
Relevancy 21.93%

This may when lag Video not is moving mouse be addressed somewhere else but whenever I searched this problem I came up with a ton of Video lag when mouse is not moving posts about the opposite issue When Video lag when mouse is not moving I watch a video in any player vlc zoom windows media quicktime it starts Video lag when mouse is not moving to lag after a few seconds until I move the mouse If I keep moving the mouse the video will not lag I ve had this problem on many filetypes mkv mp avi but oddly enough it is also present during flash videos As you can see from my system profile my computer should be able to handle most anything just fine I m running this monitor at x This is a dual monitor setup but I don t think that should affect it I change all of the power saving options so they wouldn t slow down when I wasn t active thought the PCI-E setting might do the trick but to no avail If anything this problem seems to be getting worse over time Please let me know if you have an idea of what the problem might be or if you require information to help Please note that my entire system profile is in my techspot account Thanks nbsp

A:Video lag when mouse is not moving

Mouse is USB I'm assuming.. I'm sure you've already tried a different usb port, if it's plugged into a hub - plug directly into the system. if it's plugged into one of the usb3.0 ports, move it to a 2.0 port. See if issue persists. if so, I'm going to blame a chipset driver, or a software driver for the mouse. if you've recently updated either of those drivers, roll them back. See if issue persists. If so try a different mouse - maybe, maybe it's an issue directly with the mouse. Try the mouse in a different system, see if issue is then on other system. Try these things & post back, I'm curious on this one. Hope this helps, take care!
Relevancy 15.05%

My old wireless setup finally crapped out so thought I d try Bluetooth with the longer range One thing I didn t know about Bluetooth at least with this particular keyboard and mouse to a small extent is that after a brief period of inactivity it unconnects or deactivates or whatever and to reactive it I have to type a key and then wait for seconds or more for it to come alive Very irritating especially like when I m trying to sign into something or am Bluetooth problems Keyboard working Bluetooth Keyboard problems on something I ve looked in the app and don t see anything where I can turn that off I don t mind replacing the rechargeable batteries more often if I can avoid that deactivating thing Any suggestions or am I just stuck with that Maybe back to quot old fashioned quot wireless At least those were quot always on quot or Bluetooth Keyboard problems whatever you d call it It s a Microsoft mobile keyboard and mouse There was a small install CD that came with them I don t know if the dongle would make any difference Thanks nbsp

A:Bluetooth Keyboard problems

Well, on the hopes there was something in the Bluetooth app that I missed, I went back and took another look.

Not much there, really. But I enabled Bluetooth Network (even tho I only have the BT keyboard and mouse and no other BT devices) and enabled sharing with other BT devices (I guess between the keyboard and mouse and dongle or ?).

None of those seemed particularly applicable when I looked at them before, but
whichever one of those did something, I did a test on the keyboard and at least
yet it hasn't shut off even waiting several minutes.

Actually, would be nice if everything PC / Windows would be that simple!
Relevancy 15.05%

Hi there I was out of my country for a while and when I returned my family told me that the desktop computer is not working Now when I BIOS Problems try to start the system it works fine until a message appears like quot Unknown CPU detected BIOS update is required to unleash its full power Press F to continue quot This message was always there though and when I pressed F it continued on the starting process However now the F does not seem BIOS Problems to work I had a generic keyboard so maybe I thought it was because of that so I went and bought an USB one and still no progress I wanted to reinstall windows to fix the issue however I cant access bios with the del key for some reason although it is clearly stated that I need to press del to enter bios Computer is like years old and here are the specs Dual Core GHz Intel CPU gb of Ram Asus Commando motherboard W Thermaltake power supply Geforce GT Win I formatted my pc a lot of times and it always worked fine until now bear in mind that this is a computer I put together and also there is no burning smell or shutdowns happening It just stays at that message and none of the keyboard keys seem to work I would really appreciate any help nbsp

A:BIOS Problems

Try borrowing a keyboard that has a PS/2 connection. Your generic keyboard might have had a problem. I had to use a PS/2 keyboard in order to enter into bios on an old desktop that I had. It was annoying, but for some reason the motherboard wouldn't recognize the USB keyboard until it booted into Windows. Give this a try and see if it helps.
Relevancy 15.48%

I have some problems with my frames.
It's not slight, to say the least
Heres the problem: I will be getting 60+ Frames on Max settings, and then it will randomly drop to about 1-10 frames and stay their for 20+ seconds, and go back to normal. Happens consistently. Even when on the lowest settings, the same happens.

Intel 3770k i5 @ 3.2 GHz
8 GB of Ram (But 32 bit OS so 3.2gb is being used) <---Is this the problem?
MSI Motherboard
Corsair 750w Power Supply
Corsair H60 Cooler
6 Fans
All fans on cards/ power supply is working

I custom build this PC from my Local Microcenter, around 20 days ago.
Any Ideas?
Games with games w/ varying distance visibility mostly.
Examples: Minecraft, Arma 2.

A:FPS Problems

Your RAM is the bottleneck. Upgrade to a 64bit OS and you should be fine. Make sure you clean install it (Reformat)! That should cure the issue, but if it still lingers, you may have to wait till nVidia releases the official WHQL version of the GTX 770-supporting driver. You will have to clean install that also by choosing the "Custom Install" option --> check the box that says "Clean Install". You should be good to go.
Relevancy 15.05%

Hey people
I recently bought a set of tritton 720+ headset and it is not working well. Firstly there is a constant static sound(its very soft so I dont mind if it cant be resolved and it is only noticeable when there is no other sound playing). secondly I have connected it through my optical cable port and the sound isnt working when I set the default sound to the optical port.
Any help will be appreciated

A:Problems with new headset

A couple questions to try to help resolve this problem:
What are you trying to use this headset with (computer, stereo, console, etc)?
If computer - what do you have it connected to (motherboard port or a sound card)?
If motherboard connected, what is the make and model of motherboard?
Have you tried to use the headset on another device that has an optical port (ie. Stereo, TV, console, etc) to make sure that the headset it not defective?
Did you buy the headset new or used?
Relevancy 15.05%

Hello there, this is my first post.

I have been having problems with my computer I believe it to be a graphics card problem.
I use the Nvidia GTX 650 and occasionally after about an hours use the screen goes blue (Not blue screen of death) I believe the card loses connection with my TV (doubles as my monitor) and if I restart it I get what looks to be binary flashing across my screen whilst all the colours of my load up/windows logo are blotchy and not the usual colors

Any help appreciated, Thanks.

A:Graphics card problems

Did you do a clean install of the GPU drivers? If you did not, I suggest you uninstall your current graphics driver and do a clean install. I use driver sweeper to clean out the old drivers thoroughly. You don't have to, though. Is your GPU new?

I have to ask, too, have you tried testing your RAM? The symptoms you describe can sometimes occur when you have a bad stick of RAM in your system.

Sorry I couldn't be of more help. But stick around. I'm almost certain the more knowledgeable members can help you out with this.
Relevancy 21.93%

So hello all Just finished putting the finishing touches on my homemade computer intel k gigs corsair speed w modular corsair power supply ASUS p z - deluxe motherboard gb crucial solid state XFX ghz edition graphics card So I have it hooked up to my sharp aquos inch HDTV and I m getting jerky severe mouse movement otherwise graphic acceleration mouse Major Lag seems to be fine tomb raider at ultimate settings was averaged around Major mouse Lag fps I m seeing the jerky mouse movement in games and on the desktop Also tried switching to quot game quot and quot pc quot modes on the tv also tried on my old Panasonic p HDTV that during my last deployment I used to hook up via HDMI to my laptop all the time with no issues that being said I m going to try hooking my in and up to my laptop with the current mouse which I just bought another one of today to no avail and see what happens Any help or ideas nbsp

A:Major mouse Lag

The problem with HD tvs and computers are that they can cause issues like this. Normally it has to do with with the refresh rate of the tv where beyond a certain point (mostly 60hz) the tv signal is delayed slightly causing the mouse movements to be delayed. I see you say you've tried game mode already and now your going to try another tv, but I would recommend trying a monitor if you can find one and seeing if that solves the issue.
Relevancy 21.5%

I tried to update a network controller driver on a homemade XP Computer I got the fatal blue screen after the NVidia slash screen It was an nforce driver Windows would not start I tried to get into safe mode to do a restore But no mouse or keyboard is reading Is there a way to do a system restore at start up with out going to safe mode use Can't Keyboard or mouse safe mode in By the way I don t have a XP CD I do have a product key HELP you XP Gurus Oh and Can't use mouse or Keyboard in safe mode it is really hard to get into even safe mode I saw BIOS once when pressing the Esc button But now it just goes to set up Every F button give me the option of boot menu F or Set up Delete But no matter what I hit it goes into setup The keyboard works fine in that screen But as soon as the safe mode boots up Can t use mouse or keyboard Someone told me could Can't use mouse or Keyboard in safe mode be motherboard did I do thaaaat Again HELP HELP HELP Thanks Ynotbme nbsp

A:Can't use mouse or Keyboard in safe mode

You can download a windows 7 ISO onto a USB flash drive or cd or dvd. Contact where you bought your windows 7 and they will give you a link to download the iso. or maybe you can search the web for a ISO and enter your key later. I don't know if you will be able to navigate without a keyboard and mouse, maybe they will work in the windows 7 setup like your thinking.

Good luck!

p.s. I meant windows XP not 7. Iv done it with 7 I don't see why you cant with XP>
Relevancy 15.05%

Hi My dad has recently taken to working from home but his laptop struggles to connect to the WiFi but it s ludicrously slow He needs to use the wireless printer and so I told him download the drivers for it it s a HP Photosmart C The download speed was sitting at around Kbps which is ridiculous I suggested connecting it with an Ethernet cable directly from the router It says it connected but it wont connect to the internet there aren t any packets of data being received so I ran an ipconfig test I ll put the results below I network - Windows problems. XP ve tried it on two diffrent router each one is the same Not too sure what to do I don t use XP so don t really know my Windows XP - network problems. way around and its not my laptop so I Windows XP - network problems. don t know who s done what to it He s blaming it on me fiddling with the printer Cheers for any help Ipconfig results Windows XP - network problems. with WiFi disabled and connect via Ethernet cable Windows IP configuration Ethernet adapter Local Area Conection Connection-specific DNS Suffix IP Address Subnet Mask Default Gateway nbsp

A:Windows XP - network problems.

So far so good. you should be able to ping these:
ping​ping​then try
please report ipconfig /all results too
Relevancy 15.05%

Hi Everyone Thank you in advanced for your time and help I am experiencing a Problems Printing strange problem and I m at the end of my rope here First of all here are my system specs OS MS Windows -Bit SP CPU Intel Core i GHz Sandy Bridge RAM GB Dual-Channel DDR MHz - - - MOBO Intel DH BL Socket Printing Problems GPU Acer S HL x Hz HDD GB Western Digital WDC WD EALX- BA SATA Optical Optiarc DVDRW AD- S Here are the printers I am using Local Brother MFC- C Printer Default Printer Printer Port USB Print Processor winprint Availability Always Priority Duplex None Print Quality dpi Color Status Unknown Virtual doPDF v Printer Port DOP Print Processor winprint Availability Always Priority Duplex None Print Quality dpi Color Status Unknown Network TOSHIBA e-STUDIO L Printer Port WSD-d c ae - f - cb-b - b b Print Processor winprint Availability Always Priority Duplex None Print Quality dpi Monochrome Status Unknown So I am at work doing my normal tasks when Microsoft Word freezes It becomes unresponsive and is forced to end process After starting it back up again I get a strange error message quot The printer has not yet responded but the Microsoft Office program may be able to proceed without printer information Do you want to wait for the printer quot Clicking yes causes the program to become unresponsive again Clicking no causes it to go back to normal except when I try to print it brings up the default print dialog with no printer selected When I try to select ANY of the printers every single choice will cause the program to freeze and become unresponsive again So I took some steps to try to troubleshoot after looking around online but did not find much help I tried not in order -Uninstalling all printer drivers and reinstalling them -Disabled and re-enabled Printer Spooling service -System Restore -CCleaner - clean-up amp registry repair -ComboFix -Changing default printer to local amp virtual printers -Installed Office instead won t even start-up due to printer issue The weird thing is I can print fine off of programs like notepad mspaint wordpad etc and test pages all print out fine too However certain programs like Thunderbird Chrome NitroPDF any Office program etc all freeze up when I try to print I m hoping someone might have some insight on how to fix this Thank you nbsp

A:Printing Problems

First, quit all programs. Use cmd->notepad to open a new text file, type some gobldee gook on 2-2 lines and <ctl>p to print it - - DOES IT?

If so, the print driver is fine and so is the system - - MS Word needs to see a new default printer.
Relevancy 15.05%

On my Apple IPod, my home button is like stuck down, it will not work no matter what type of pressure I apply. Am I screwed? or can it be fixed(take to apple store maybe)?

A:IPod Home Button Problems

take to apple store maybe?Click to expand...

at least talk to them
Relevancy 36.98%

I am having problems with a delayed keyboard and a mouse that lags and won't click properly. Sometimes it won't click at all, other times it clicks and the computer won't register that it's clicking.

I have run all test to ensure it is not a malware and was directed to this forum for assistance.

A:Keyboard/Mouse Problems

Seems like your computer is slow. Open up Task Manager and show us the Processes tab, ordered by descending CPU usage.
Relevancy 15.05%

Hi guys this is my first post have just finished putting together my first pc - when I turn the pc on the lights are flashing fans are spinning I do not hear a BEEP however keyboard and First Build Problems mouse lights are on as expected The problem is my monitor is not connecting to the pc quot Signal not found quot is the message that appears on the monitor before it goes into sleep mode I cannot see the BIOS and therefore cannot install my Windows OS The following is the list of components in my pc build - Asus P -I H Motherboard - Intel i - LGA CPU Ghz - Corsair GB Vengeance DDR - Gigabyte ATI HD - Western Digital TB SATA - W Corsair CX PSU - Windows -bit I have tried using VGA and HDMI cables I have tried using different First Build Problems monitors which First Build Problems have worked fine when I tried connecting them to my laptop Therefore I determine there must be something wrong with my pc but I cannot pinpoint the problem Any ideas or suggestions will be much appreciated Cheers nbsp

A:First Build Problems

Double check all connections on your board. It's not hard to miss a cable and forget to plug it in. It also isn't hard to plug some cables into the wrong spots on the MOBO. Make sure everything is secure and in the right place.
Relevancy 15.05%

Hi I am having some issues with my PC and would really appreciate any insight First off my setup CPU AMD Phenom II X rd core unlocked with Crossfire Problems 5770 ATI HD Performance CPU-Z says it runs at Ghz under full Problems with ATI 5770 HD Crossfire Performance load Memory Gb DDR Video Two Sapphire Radeon Problems with ATI 5770 HD Crossfire Performance HD GB -bit GDDR cards in Crossfire the nd card was added maybe a months or so after getting the first one this goes to my receiver and Problems with ATI 5770 HD Crossfire Performance my TV running at x Mobo ASUS M A TD EVO AM with PCI-e slots x x HD My main one where my Steam files are is a WD Caviar Black TB rpm OS Windows Catalyst Control Center CCC v hardware info shows both the primary and linked adapter primary running at PCI-e at x the linked card running at x I just updated from CCC or and I have had Crossfire enabled every since installing the second card With CCC and every previous version of CCC I ve had about of the time when I booted up from shutdown I d have to go back into CCC and re-enable Crossfire for some reason it would be disabled on restart more often than not I ve only had for a day now and I have not yet shut down my PC My main issue is basically I have never really noticed any difference from running in Crossfire vs running one card when gaming Crysis BF Portal others I think I am fooling myself into seeing a difference but sometimes I would start up my system start gaming and it seemed normal then remember that I didn t check if Crossfire had been disabled so I would recheck and see it was disabled and so I would renable it and then go back to gaming and not really notice a difference Does that make sense And sometimes it would even seem worse So I bought Hitman Absolution on Steam not pirated and noticed that it had benchmarking which I ve never done These are my in-game settings Resolution x Fullscreen checked Refresh Rate VSync checked MSAA x Exclusive Fullscreen checked Aspect Auto Quality Custom Shadow Medium Texture Quality Normal Texture Filter Anisotropic x Reflections Medium FXAA checked Global Illumination unchecked Tessellation unchecked Level f Detail Medium Depth of Field Medium SSAO Normal Bloom Normal With my previous version of CCC my FPS averaged around but I didn t write the exact numbers down I went to the AMD website and saw a new CCC version and the new CAP with Hitman Absolution I uninstalled all previous CAPs and ran the installer to remove my previous version of CCC Then I rebooted made sure display drivers were all uninstalled and installed I ran benchmarks with Crossfire on and off then installed the new CAP and ran benchmarks with Crossfire on and off each three times quot A quot quot B quot and quot C quot Here s my avg FPS Crossfire Enabled no CAP A fps B fps C fps Crossfire Disabled no CAP fps fps fps Crossfire Disabled CAP installed fps fps fps Crossfire Enabled CAP installed fps fps fps So it almost looks like my best settings were with Crossfire disabled and no CAP So Why I mean if I enable Crossfire and I do what AMD suggests and use the latest CCC version with the lates CAP I get - fps I am not too technically inclined so I was thinking I either have a faulty nd card although CCC says it s linked or my x PCI-e slot is slowing everything down or I really don t know If you have any ideas suggestions please let me know nbsp

A:Problems with ATI 5770 HD Crossfire Performance

Try clean installing the drivers.
1) Uninstall the current drivers with this tool:
2) Then reinstall the 13.4 driver after you have uninstalled previous versions with the tool above.

I never go it, what exactly is CAP? Also, isnt it bundled with the drivers now?