need unlock code fo administrotor password r: ABA17BF8http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/15-p184ca-bios-password-reset/td-p/5817087
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Please refer to the message below for information on how to remove your Dell laptop BIOS password. The information also applies to other manufacturers and summarizes a wealth of data collected from previous threads and thousand of posts related to this problem.
We no longer support any further discussion on this topic as we believe all the free help that could be given is already out there (the post below sums it up pretty well). You can always go back to your system manufacturer for support, as well as google for the dozens of third party paid support providers that are available online.
Summary of laptop password help thread:
Mobile Password Help
The following support information and downloads, are provided to help members freely remove their laptop password
If all options have been tried and you still require help removing your password, search Google for 3rd party alternatives
TechSpot forums and all support is provided freely at all times, it is against our guidelines to link to external paid services
You are advised to try any or all options, with your first point of contact being the laptop manufacture, being the best option
TechSpot forums are FREE and manufacture support only
Click >Dell Support and System Information for a particular Service Tag
> Click > HP Live Chat, Drivers, Warranty and Support Information thread
> Click > Toshiba BIOS Setup / BIOS settings -- access instructions
Reset password on Satellite A205: http://www.techspot.com/vb/post613153-2.html
Reset password on Satellite A100 / A105: http://www.techspot.com/vb/post572530-1.html
Password types :
Power On Password (pop). this password can be reset by unplugging the cmos battery for a while, and plugging it back in.
Supervisor/bios Password (svp). this requires reading the eeprom chip (8 leg or 14 leg) with an electronic device by using another pc's serial port or by paperclip method if model type available.
Hard Drive Password (hdp). this is usually tied to svp, but not all the time. it requires special software and a library of known manufacturer's password. but can be cracked either recovering the data or wiping the data.
Transfer of Product Ownership
International warranty contact phone numbers
Old closed threads, with lots of info:
Dell BIOS password removal (Jun 07 - Sep 07)
http://www.techspot.com/vb/topic79263.html (543 replies)
HP / Dell / etc. Laptop password help thread (Jan-Mar 2008)
http://www.techspot.com/vb/topic97423.html (533 replies)
HP / Dell / etc. Laptop password help (April - July 2008)
http://www.techspot.com/vb/topic59293.html (937 replies)
HP / Dell / etc. laptop password help thread (Aug 08 - Apr 2009)
http://www.techspot.com/vb/topic109612.html (2200+ replies)
Dell Manuals :
DSTCD.iso : (Release date: 22-November-2005)
HTML Document: http://web.archive.org/web/20031103020606/http://qasimtoep.tripod.com/dell/dell6.html
PDF Document: http://www.savefile.com/files/2059217
laptops unlocked: http://www.techspot.com/vb/post645683-913.html
Chip 24C02 24C04: http://www.techspot.com/vb/post698486-1134.html
Dell IC Numbers: http://www.techspot.com/vb/post645922-916.html
Command line Uses => asset /? (eg Asset /o for owner tag)
HP OldPass .zip includes:
[*] unlock6.exe (made in 1997)
[*] BIOS_PW.EXE (made in 2003)
[*] HDD_PW.EXE (made in 2003)
HP Oldpass2 .zip:
As above, made as a copy, using another Zip program
Dell Latitude .zip:
D35B password generator (old generator)
Dell MasterPW .zip:
D35B password generator (old generator)
How to use
I am working on a Toshiba Satellite with Insyde H2O bios. It says to use F2 for setup and F12 for boot manager.
I've tried all the function keys, as well as esc and del and they only get me to Windows Boot Manager. (This includes F2.)
The machine has Vista that stops loading when it gets to the network drivers. Could a corrupt BIOS be the cause? If I download a new BIOS can I install it from the command prompt?
If the BIOS is still OK are there other ways to get into setup?
(Meanwhile F2 works just fine on my Dell Lattitude)
Try using a USB keyboard...
"Could a corrupt BIOS be the cause?"
I don't think you would get that far in the boot process if the bios were corrupt
I have an old Toshiba laptop and it is unusable and I was wondering if there was a way to factory reset it without a disk.
Model # - psk2cu-s5150
I believe there's a partition that contains the OEM setup, but you need a CD (any) and to recover from the Restore partition
Okay so my computer is manly for playing games but I ve been having a problem for quite some time that I & self it Bios GPU Usage Drops Changing & CPU can t seem to be able to fix During gameplay at some points totally randomly I start to have huge freezes both CPU and GPU usage drop insanely and following same do the fans this usually GPU & CPU Usage Drops & Bios Changing it self happens for or minutes sometimes even longer a simple relog from the game fixes it This also happens if let s say I go AFK from my game about minutes or so when I come back it s freezing ALOT I looked further into trying to fix this problem I tried almost everything until I had the idea to check my bios since I had previously overclocked my CPU not overclocked atm and surprise for me when I did a bios reset for default settings this is what I saw http postimg org image eoejxdyv That is changed by itself every boot And that is what is causing my GPU and CPU usage drops I have no idea why that is changing by itself at first I though it was AI Suite software from Asus that I had used before to overclock my CPU but even with that uninstalled it is happening I also thought about reinstalling my windows but I would rather wait GPU & CPU Usage Drops & Bios Changing it self for Windows to go public My Specs - Windows Pro - Bit - Evga Supernova Nex G Gold - Asus Z -Pro Socket - Intel Core i k ghz Ghz Turbo - Corsair Hydro H - Gigabyte Windforce R X GB GDDR - GB G Skill Ripjaw-X Mhz DDR Dual PS All drivers and software are always updated nbsp
Have you tried changing the cmos battery? The bios will not hold settings if the battery is bad.
as the topic states I think of making a move from my old t1100 to FX8350.
Tricky part is that I need to flash my BIOS to make the old AM3 plank support AM3+.
MB, m4atd89gt. And current BIOS is the stock BIOS 1006. The BIOS that I'm updating to is a 3029.
Has someone of you fellow techspotters tried this already? Were the results satisfying, or just infinite amount of crashing? Which I'm just a little afraid of when making the change.
Any advice for such activity?
And yes, I know they are AMD proceccors
Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.
I need help as fast as possible
I have just added a new SSD drive does recognize 1720 Inspiron in modular boot bay not BIOS sequence HDD in the modular bay of my Inspiron The SSD drive in modular bay is accessible if I boot using my normal harddrive or USB DVD-ROM drive for OS installation which I managed to install on the SSD drive Once boot using my regular HDD I can see the drive is set to Disk in Windows Disk Management And my other HDDs Inspiron 1720 BIOS does not recognize modular bay HDD in boot sequence as Disk and Disk I can boot thru HDD or HDD by selecting them in boot sequence However the SSD drive is not available as part of the boot sequence in the BIOS setup or F boot sequence The BIOS though recognize that there is an SSD drive attached Inspiron 1720 BIOS does not recognize modular bay HDD in boot sequence in modular drive bay My Inspiron is using the latest A BIOS and I could not find a way to include the SSD as part of the boot sequence The boot sequence works when I put back the DVD-ROM drive which boots without any problem with any bootable CD DVD Is there any way I can make the modular bay SSD bootable other than of course putting the SSD in the HDD or HDD caddy which some thing I do not wish to do Please help nbsphttp://www.techspot.com/community/topics/inspiron-1720-bios-does-not-recognize-modular-bay-hdd-in-boot-sequence.210955/
My laptop keeps asking me for my facetime, icloud and messages password. I've entered the password but it keeps popping up. Even if I enter the wrong password it accepts it and asks me again in about 30 seconds. I have a Macbook Air but I don't know what system it is though. What can I do to stop this?
*IF* you would register, we might be willing to assist
Hello I have an old HP Pavilion n that has - GB DDR PC ram modules but they are being reported in BIOS as only being at PC and I am just wondering if this is the best that this system can do with this speed of ram or is there anything that I can do to get it to run at PC Here are the specs from CPU-Z Mainboard Model - ASUS P B -LA rev Chipset - Intel i D rev Southbridge - Intel BA ICH rev Processor Intel Pentium - GHz - Northwood Clocks Core Core Speed - MHz Multiplier - x Bus Speed - MHz Rated FSB - MHz CPU-Z is reporting that both modules are PC DDR but the BIOS is indicating PC The BIOS does not have the ability to change anything regarding clock settings and the board itself has no jumpers to change so any input would be welcome regarding any suggestions if this system can actually get full usage of the PC DDR GB modules or if it can only run at PC because of the Bus Speed I thought that if Speed Ram reporting BIOS not correct in the board had a MHz FSB it would run DDR PC ram Any advice would be appreciated Thanks Brian nbsphttp://www.techspot.com/community/topics/ram-not-reporting-correct-speed-in-bios.207737/
Hi there! I am new here and I need some help regarding a new desktop I just bought.
MOBO is Gigabyte GA-970A-DS3P and GPU ASUS R7 260X connected with HDMI on TV.
I set up the desktop with win7x64 ultimate.
Problem is when the pc boots and I repeatedly press DEL button to get on the BIOS settings and I see nothing but BLACK on the screen and the mouse cursor which it can controlled through the mouse, though it boots up normally on windows. Any help?
note: I installed all drivers after I installed win on both MOBO and GPU
Are you using a USB keyboard? See if you can find a PS/2 keyboard and try that.
I have a toshiba satellite C870-11H. It used to ask for the password whenever it went to sleep. I checked and the system is still set to do so.
Some time ago I got fed up with the clowns at Microsoft thinking their latest update was more important than whatever I happened to be doing and destroying the work I was doing so they could load their rubbish. I set the system to ask me before doing an update. Well it doesn't bother to do that and now very rarely it does load an update without authority. Could it be that my system is now way out of date?
Is there a customer focused operating system that I could use instead?
Every OS is customer focused. Microsoft is for non-Mac machines and getting things done. Linux is more powerful but requires more techy-ness to use.
Maybe try Mac OSX.
But there's nothing wrong with Windows. Sounds like you have a decent amount of problems.
Run WIndows update, make sure it's completed every update.
Run CMD.exe in admin mode, run sfc /scannow
I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
Recently something strange happened with my pc and every keyboard I tried to use doesn't work.So I thought by formatting it the issue might be fixed,but since keyboards don't work I can't enter boot menu.Is there any other way to format it?
You will have to remove the hard drive and format it in another pc.
But you can't install Windows O/S on the second pc as it won't run on your original pc.
After you have formatted the hard drive and fitted it back in the original pc, you might find the keyboard works properly again.
This assumes that you have the original Windows DVD and product key, or you have a saved image of your 'C' drive complete to copy back again.
( I would be more worried about why none of your keyboards work, but if you can reinstall Windows again that would solve any keyboard driver issues anyway.)
Hope that makes sense.
My brother's laptop is a Packard Bell EasyNote TK87, Like mine, it runs w/ 7 32-bit.
More Detail of problem:
When I click the power button it has the logo and option 'Click F2 for startup menu' I don't click the key and it says 'loading...' and I'll just rebooting the laptop. How to resolve this problem
Go here and make sure u don't have a key stuck. http://www.keyboardtester.com/
So I have a very strange issue with my laptop.
It's a Toshiba a665-06f
I7 [email protected]
500gb Samsung ssd
Running Windows 8.1 pro
I can't get into the bios it boots in less than 10 secs, I've even tryed removing the hdd to get it to boot to the bios but it just sits at a blank screen when I do that. I've tryed tapping the all the f keys the del and esc on start cant get into the bios or even the boot options. Other than not booting into the bois it works great.
Any ideas please?
"Other than not booting into the bios, it works great"... So this means you can boot into Windows normally, and use the laptop?
EEPROM is a hardware piece that the BIOS (which is a code) is inside it. What about some piece named firmware? Is there any independent device named firmware in PC? If so, what does it do?
A firmware is a structure code, embedded and instructed written languages that is designed by programmer to communicate with devices attached to the particular device. Most especially of our input devices has firmware inside talk of mouse, keyboard, flash drive e.t.c
I replaced the mobo on my Dell 5510. Purchased from Dell. Sticker on mobo says BIOS ver A05. About every other day I get blue screen and physical dump of memory. My system info says my BIOS ver is A07. How do I go about changing BIOS? Is it as simple as pulling battery for 15 seconds? Some have offered this suggestion but I get a little worried at "friends" advice.
Removing the battery won't change the BIOS version. You need to download the version you require from the Dell site. From Windows you "flash" the BIOS. Take your time preparing for this. If anything goes wrong you will wreck your motherboard.
I have a Dell Latitude D630 and the motherboard died, It's out of warrenty so I bought a Motherboard on ebay. The Bios Service Tag does not match the number on the bottom so I would like to chage it to the correct one. How can I do this?
I read about a DST CD = Dell Service Technician CD that has this option but I can't find one.
It's not a real important thing but when I use the Dell System ID application it reads the Bios Service tag and not the real system tag that Is registered to me.
Laptop wont load bios or OS Interesting wont load Laptop bios OS or issue here When I press the power button the HD activity led light comes on for just a second I feel the HD spinning up and running the fan kicks in and runs then nothing No Laptop wont load bios or OS leds flahing just power led no beeps no screen and no bios I v discharged static build up battery out power button held down quot and tried both mains amp battery to no effect There were no precursors to this issue So I can deduce the laptop is unable to complete POST in pre bios despite the lack of beeps yet can supply power to fan amp HD Now the GPU is Laptop wont load bios or OS GForce m GS aware of the issues with the xxx series I v kept the air flow clean and use a laptop cooler Possible suspect though it never ran hot and all worked fine till I turned on a couple of Laptop wont load bios or OS days ago Now I understood that a failure of the xxx series usually presented a degraded screen lines etc rather than failing post I m backed up and use my second laptop so nothing urgent just a oportunity to learn I am interested in hearing from hardware geeks and their thoughts nbsp
Seem to have been redirected here for some unknown reason !!
I got this desktop computer that has a Asrock board in it Model # FM2A75M-DGS and it comes up with the boot screen and I try to get in to boot settings or anything and it wants a password. I have no clue what the password is and I need help to see if it can be reset. I have looked on the internet everywhere and have had no luck. If I pull the battery will that reset it......help me please. Thanx
Removing the motherboard battery and waiting a couple minutes before replacing it should reset it to where you can gain access again. It should help you. If not then reset your jumper to clear the CMOS. You can get the jumper resetting instruction in the motherboard manual.
I ve got this legendary socket motherboard DFI LP UT SLI-DR Expert chipset nForce SLI almost new only LanParty - UT using BIOS DFI Del motherboard enter Cannot key Expert SLI-DR NF4 one SATA port is somewhat messed up missing those plastic parts from both sides bought this baby really cheap from well known Romanian e-bay like site okazii ro and I put it on my FX- dual core yeah THAT one and some KINGSTON value memory and tried to boot my rig Here is my problem now this board is Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard working those red diagnostic LEDS start next only one left so no quot LEDs of death quot syndrome for me and the onboard speaker beeps ONCE which I know is always a good thing but I cannot enter BIOS to setup as I need Del key on my PS keyboard is NOT working as it should I press the key and the result is nada nothing first I see the boot logo from Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard DFI after that Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard I see this error message quot CMOS checksum error - defaults loaded press F to continue or Del to enter setup quot and when I press Del I get nothig and when I press F key sometimes I see this message quot Verifying Pool Data and Backup CMOS OK quot and other times I see quot Sil SATA RAID Press Ctrl-S or F to enter RAID utility quot One more thing to add is that I can actually use boot menu selection using Esc key to selct HDD CD-ROM or some other option and this board actually can boot using CD DVD I already tried UBCD rescue CD and some Linux live distros to see if it s not a problem with my FX- processor and I m happy that it is working well is all good no problem here actually I ve seen it s name and working frequency Mhz at POST please help me to solve this problem with my mobo nbsphttp://www.techspot.com/community/topics/cannot-enter-bios-using-del-key-dfi-lanparty-ut-nf4-sli-dr-expert-motherboard.204105/
Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.
Is there a way to tell which bios I need or what model I now have?
Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.
HP Support, Drivers, Contact and Help Forums | HP ® Support
I have a Rosewill RC-215 PCI SATA card with an Asus SATA DVD/CD Rom drive hooked up to one of the SATA ports. When I boot up, the motherboard (Asus P4PE) bios doesn't recognize my DVD drive(Asus DRW-24B1ST) so I can't boot up from a repair CD/DVD disk. But once I'm in Win2000, the DVD drive (Asus DRW-24B1ST) is recognized and usable. And it shows up in My Computer, and Device Manager.
I need some advice so I can figure out how to be able to boot up from a DVD/CD when I need to.
You may have to spend a few bucks and get a PATA/IDE DVD drive. You have drivers for the SATA card loaded after 2000 boots, so that is why it works.
Have a look through your BIOS and see if there is any option that supports your SATA card. I remember this back on the A7V boards with the Promise ATA 100 controller vs the 33/66 that was 'included' with the motherboard.
I assume you have looked for that option in the BIOS. If you have, and it doesn't exist, I think you will have to pick up a non SATA drive.
Also, I think its pretty cool that someone is still running 2k.
I'm wondering if anyone can help me to set up my bios. I've 'tweaked' this, and ticked that, and now the pc just starts up, runs for a few seconds, and shuts down. I really don't know what to do.
For starters, your OS ME,XP,7.8 ?
Motherboard:ASUS M5A97 R2.0
OS:Windows 8.1 64-bit
I hardly know anything about the BIOS so I am asking you this:
Will I need to update my BIOS and if so how to do that?
Am I going to update it to the latest version(2103) or the version when the processor was first compatible(1006)?
Please help, I do not want to make a mistake when updating so please provide a detailed explanation ! ! !
Some might say updating the BIOS is not worth the risk unless you have a reason to chance it. On the other hand I've never had a BIOS update go badly. BIOS updates are not that difficult to do. But there is always a risk of the update failing. In the off chance of failure, the motherboard will be bricked. There are motherboards that come with a second BIOS for failsafe. I don't know if the failsafe can be used under a bricked board, I will assume it can until I hear otherwise.
There are three ways to update that I am aware of. All of which may not be available depending on motherboard model and age of system.
Within the Operating System (I've used this method but for awhile it was advised against)
You will need to download BIOS Update application. The application will download and install the new BIOS.
Within the BIOS
Within the BIOS there is an update facility. You will only need the new BIOS. (My BIOS will only update from a USB stick.)
From DOS utility
Not only will you need to download the new BIOS, you will need to download the flash utility that is designed for the update.
I recommend updating from within the BIOS (assuming you have this option). Download the new BIOS to a USB stick and then boot into the BIOS. Browse around to find the update facility and the rest is self explanatory.
Hi, I have a custom pc, and I am trying to turn of the automatic fan control (so I can use speedfan to control the fan speeds). to do this, I need to enter the BIOS, but I cant.
when I boot, my pc tells me to press DEL to enter bios, and I do, and... nothing
cue 10 , minutes restarting and mashing the hell out of my keyboard. still nothing.
I dont have a fn key to press, its a standard keyboard, no special bios, just the standard asus bootscreen.
What kind of bios you have is it AMI BIOS, AWARD BIOS, PHOENIX BIOS ETC, try pressing f2 button..
Hi there. Since I bought my new mouse and illuminated keyboard, when I use the PC a lot, they have spontaneously been stoping for a period of time and then they work fine. I didn't have this problem before because I had a ps2 keyboard. Now I have USB mouse and keyboard and this happens. I do believe there is a problem with the power management. A friend of mine has the same motherboard and he incurs the same problem. I have a Gigabyte GA-B75M-D3V and here is a printscreen of my bios with the power management tab.
What settings should I change?
I think you'd be able to adjust that power management settings in Windows under
Control Panel>Power Options>Edit Plan Settings>Change Advanced Power Settings>USB Settings
Or in Device Manager>USB Root Hub Properties>Power Management Tab
I'm going to find the following info about new/recent computers. Is there anyone who likes to help?
1-Where the BIOS is stored on the motherboard? Inside the ROM, EPROM or something like USB storage on the motherboard?
2- I have also heard that this (BIOS) is stored into CMOS and a battery supplies the power for the settings of the BIOS, correct?
3- Also I have read that in the new motherboards there is a jumper that can delete the settings of the BIOS. What's your thoughts?
Thanks in advance.
1. See #2
2. CMOS is correct, sometimes these are removable chips.
3. Yes, many motherboards have a jumper to reset to defaults, this is pretty important for overclockers, because you can set the BIOS to settings that are so unstable the computer can't get to the BIOS.
4. Your definition of recent/new is not in alignment with what most people would say is new. Motherboards for a few years now have been shipping with UEFI rather than a traditional BIOS.
I have an ASUS MeMO Pad 7 inch non HD keep that in mind total different situation. But I cannot Factory Hard Reset it by using any normal button combinations or reset button. I have done a lot of research but have come up empty. The reasoning behind the need to perform factory reset is the number pin to log in was forgotten. Yea, yea I know I should not use it but it happened so non the less any ideas?
So you can't get to the factory reset menu? Holding the power button will turn the tablet off right?
This might help:
Hi, I can't find the settings for the CPU voltage in my BIOS. I know it's a H board, but can I lower my CPU voltage? If so how?
The H77 chipset does not allow you to alter CPU voltages. That can only be done on a Z77 motherboard/chipset.
Hi A couple of months ago the system drive on one of my old PCs suddenly stopped working - not particularly Operating by Systems by BIOS Recognised Drive not IDE surprising given that it s about years old I swapped it out and left it until I had IDE Drive Recognised by BIOS not by Operating Systems time to try to pull the data off it It s a GB Western IDE Drive Recognised by BIOS not by Operating Systems Digital Caviar WD AB- CDB EIDE drive Now when I connect it to the secondary IDE bus on my PC it does seem to spin up and the BIOS recognises it no problem but neither Windows XP Disk Manager nor Slackware Linux cfdisk do This is not a situation I ve come across before disk recognised by BIOS but not the O S Does anybody know what the problem might be and what I can do to try to resolve it I have been pretty careful with its usage over the years eg not having a paging file which I guess is why it has lasted so long but I don t really need to use it any more - I would just like to pull the data off it if possible without incurring significant expense Edit I forgot to say on bootup SMART reports no problems Thanks very much g nbsp
Hey 3g. I've never been in that situation myself, I do believe the BIOS only reads parameters about the drive that it gets from the preprogrammed circuits in the drive, whereas Windows is trying to actually read data off the drive and can't. Is the drive configured correctly for where it's placed with it's jumper pins?. You may want to run a diagnostic test on the drive from the link below
Hi there Been Bios and problem Beep keyboard looking around the internet for answers to my problem but didn t find any My computer beeps continuously Bios Beep and keyboard problem at startup When windows loads it stops There is no pattern in the beeping My Bios in Insyde H can t get in advanced mode by the way After startup the quot sign is appearing in the logon textbox a few times And the letter d is not working Bios Beep and keyboard problem A week ago I had a lot more letters not working and also a beep at startup Used an external keyboard and disconnected the laptop keyboard from the motherboard Problems were gone So I ordered Bios Beep and keyboard problem a new laptop keyboard replaced the old one and the beeping started all over again and I m still pasting the letter d The on screen keyboard works fine Sometimes when I use a few programs simultaniously the CPU temperature gets pretty high but that has happened before did a ram test and no problems found Malwarebytes Can t find anything What else can it be I have a Packard Bell easynote tk laptop and use Windows ultimate bit Thanks in advance Tom nbsp
Anyone an idea?
I recently purchased an Asus N VJDH laptop The laptop came preinstalled with the abomination known as Windows I am trying to change the boot order so the laptop will boot from BIOS Asus an on Laptop Accessing my Windows disk To do this I need to access BIOS I have tried most of the standard key combinations F F F F Insert Delete but I cannot seem to access BIOS I even contact Asus Tech support by phone but their representatives are a special kind of useless They would not provide me a straight answer to this question Does anyone else have Asus laptops Do they know how to Accessing BIOS on an Asus Laptop access BIOS Update I have half solved this problem There is a rather convoluted procedure listed here http forum notebookreview com asus -need-help-asus-n vz-rh -cant-enter-bios html that enables me to access BIOS Still this is something I should be able to access upon booting I should not be going through the operating system just to access BIOS If something ever went seriously wrong with my computer I may never be able to fix it if the only way to access BIOS is listed above nbsphttp://www.techspot.com/community/topics/accessing-bios-on-an-asus-laptop.197791/
Good evening fellas The Problem This is an issue I have never run into before on numerous builds My computer wont reset from pressing the reset button or through software reset I was able Computer wont reset (Hard or Software) to get through windows installation by pressing the power button and powering back up This is when I noticed a second issue My computer wont boot to windows with the USB mouse and key board plugged Computer wont reset (Hard or Software) in Front panel or back panel its just a black screen It will post with the USB mouse and keyboard plugged in as I am able to press F to get into bios I tried rearranging the front panel connectors on the mobo running with only the power button hooked up running with the front pannel usb hooked up and looking around bios for any relevant settings cant find anything there related to boot Once in windows I test my hardware by playing about hours straight of AC and doing burn in tests with no errors I am at a loss The Background I recently bought Computer wont reset (Hard or Software) a replacement mobo and power supply to replace a pair that fried due to moisture I bought a new case because I fell out of favor with my old case that had a window pane and led lights and I upgraded my ram to gb x gb modules Essentially I only kept my TB HD DVD-RW Video Card and CPU I tested all of the hard ware I kept in a friends system he let me use for the purpose and those components all burned in well after about hours of benching and burn in testing with no errors The Hardware Mobo Asrock N C-GS http www asrock com mb NVIDIA N C-GS FX CPU Phenom X BE GPU Pallet GT Sonic Edition http www newegg com Product Product aspx Item N E RAM GB PC http www newegg com Product Product aspx Item N E PSU Raidmax Hybrid W Modular http www newegg com Product Product aspx Item N E nbsp
A strange problem indeed.
Triple check your wiring is correct using your motherboard manual. Be sure the motherboard is mounted correctly on the standoffs and no grounds are occurring.
Faulty buttons on the case itself?
Reset bios to optimal defaults, clear cmos.
After that I would return the mobo.
Sorry I cant be more specific, Hope this helps.
I have 2 gb kingston SD memory card, which is password locked, now I forgot the password, how to unlock it? Plz help me in this regards.
Go for Unistal port locker
So I use a hard drive tray which usually works fine drive/OS with files 'interact' BIOS hard but every couple of months I ll get no boot no Bios just a black screen and various led s You can see a previous post at http www techspot com community topics stumper-no-bios-or-video but Saturday I had my mouse BIOS 'interact' with hard drive/OS files freeze and couldn t get any control Re-boot attempt gave a DMI pool data error Surfing yields a dozen possible reasons for that error Ended up re-setting the Bios solved I use b XP and rarely Linux Mint all on different drives The guy who helped me says Bios interacts with data in the MBR on the different drives I BIOS 'interact' with hard drive/OS files have never read anything stating Bios can get mixed up due to which hard drive or OS as Bios passes control off to MBR and then OS regardless of which sata cable being used I agree the drive tray must be confusing the Bios but don t understand how Recently I haven t even had Mint installed so I don t think the grub is a culprit Anyone know how using a tray and different drives could change settings in Bios Goes against what I learned nbsp
The Boot sequence of a PC has this (legacy) sequence of events
Power On Self Test (POST) occurs
The video card is found
Secondary rom' are found and executed (eg IDE/ATA,...)
Bios vga display
System inventory of the devices occurs
PnP devices are found
Using the Boot sequence map in the BIOS, a device that is ready and bootable is found
the MBR is read if found
and the BOOT.ini processed to locate the kernel
So the list of ready devices are sampled to find a MBR.
For UEFI support, the BIOS looks for the /boot partition.
Can som1 help me?
I have a asus p5n-d mobo, that keeps giving the same error at start up " Cmoc checksum error - Defaults loaded". Ive updated the bios file from 0601 to 0801 and also changed the battery but I keep getting the same message.
Ive tried to reset the bios with the mobo cd but that aren't no help either.
If their arent anything else I can do, im thinking of getting a budget socket 1155 mobo with sli, could som1 recommended a mobo.
Clear CMOS And Update Bios
Hi I have a HP Laptop it?s but with newish software running vista. Its all been working fine form about a year or so. The other day some of the keys stopped working, I have not dropped it or spilled anything on it. I turned it and when I tried to go back in to it, it came up with the black BIOS screen. However as the keys were not working it would not let me select anything (i.e safe mode) it times down to open in the already highlighted section which was rum window as normal (or something like that) it then gave a blue screen and said it was doing a crash dump. After this it went back to the black BIOS screen and repeated the whole thing. Its stuck in some sort of loop. I don?t have any disks to reinstall what can I do???
I'm going to have your thread moved to a more appropriate hardware forum. Consider the possibility tat the keyboard may be defective and you may have to replace it. That is no problem- I just replaced mine.
Stay subscribed so you'll know when you get reply.
I have a Windows 7 computer wired into my home network. It has a printer attached to it that I have set to share. I have a windows 7 laptop and an XP laptop. Both 7 machines can see open the shared drives on the XP machine but when I try to access the shared drives of either 7 machine from any of the other machines I am asked to give a User ID and a password. This is a private Home network. I have no passwords set up on any of the machines. I'm trying to set up the printer on the two laptops and I can't access it without the User ID Password window popping up. Does anyone know what the problem is?
This is all normal operation for print/file sharing. If you really want sharing without using passwords (imo a security risk), then you need to google for "anonymous sharing"
My pc had BIOS breakdown due to unstable electricity.. I took it to a shop, they installed BIOS but it was a wrong version.. The mainboard is D945GCNL but they installed BIOS for D945GCCR.. Everything is working good, except LAN card driver is not installing.. I tried alot to recover it to its own version, but all in vein..
Please help me..
Have you told the shop that they installed the wrong BIOS?
Hi there I was out of my country for a while and when I returned my family told me that the desktop computer is not working Now when I BIOS Problems try to start the system it works fine until a message appears like quot Unknown CPU detected BIOS update is required to unleash its full power Press F to continue quot This message was always there though and when I pressed F it continued on the starting process However now the F does not seem BIOS Problems to work I had a generic keyboard so maybe I thought it was because of that so I went and bought an USB one and still no progress I wanted to reinstall windows to fix the issue however I cant access bios with the del key for some reason although it is clearly stated that I need to press del to enter bios Computer is like years old and here are the specs Dual Core GHz Intel CPU gb of Ram Asus Commando motherboard W Thermaltake power supply Geforce GT Win I formatted my pc a lot of times and it always worked fine until now bear in mind that this is a computer I put together and also there is no burning smell or shutdowns happening It just stays at that message and none of the keyboard keys seem to work I would really appreciate any help nbsp
Try borrowing a keyboard that has a PS/2 connection. Your generic keyboard might have had a problem. I had to use a PS/2 keyboard in order to enter into bios on an old desktop that I had. It was annoying, but for some reason the motherboard wouldn't recognize the USB keyboard until it booted into Windows. Give this a try and see if it helps.
I have a faulty win xp program that I am about to upgrade to win 7 and this bios deal is something I have never learned about. Is there a link that you know about that I can read and find out about how bios works and what it does? Thanks! Tammie
I'll answer the question in your other thread HERE
You can close this one.
We have a model HP z820, very powerful machine, with the basic hp image we have on there, win7 32, windows recognizes the DVD in windows but in the Bios it does not recognize it.
Note, this is SATA and the bios was already updated.
Hey there So I have this board Asrock Twins-HDTV I found out that with my processor I cannot use this board BIOS Upgrade question unless I upgrade the BIOS Thing is the most recent version is P I have P The question is there is a newer version of the board called the R supporting Core Duo using the same chipset Should I upgrade to BIOS Upgrade question P or will that brick my board And will I gain Core Duo support with that Remember my board is the quot R quot not the I have this question really because I m a bit of a suck for quot latest versions quot and in the description there are things like quot Modify USB code quot Can I trust ASRock s website in giving different bios files to the and the Regards The website of my board http www asrock com mb overview asp Model Twins-HDTV and the newer one http www asrock com mb overview asp Model Twins-HDTV R nbsp
BIOS updates are always considered risky and recommended only when necessary. With that said I have never had issues while updating, but that doesn't mean I never will. What I'm trying to say is no one can guarantee 100% success.
After studying the links you provided, I'm thinking you have a Core2 processor that your motherboard will not support.
BIOS updates are software updates. Board revisions are hardware updates.
The P2.10 BIOS update seems to require the V2.0 board revision in order to support the CPU in question.
In other words it looks as if the BIOS update supports your CPU but also requires the V2.0 board revision. Without the needed hardware, the software update is useless (unless you need the update for another reason).
I have a dell dimension 2400 running vista, pentium 4 pross. purchesed a dua core pross. I cant find a bios to work with my computer help.
gary szabo said:
I have a dell dimension 2400 running vista, pentium 4 pross. purchesed a dua core pross. I cant find a bios to work with my computer help.Click to expand...
Any files for your machine will be found here. - http://www.dell.com/support/drivers/us/en/19/Product/dimension-2400
If you need further assistance please feel free to start a new thread. This thread belongs to someone else. By the way, welcome to TechSpot!
Hi Friends ... I have this laptop that has been given to me by my company and the USB ports have been blocked in manner such that I can copy stuff from my USB drive on to the machine but cannot copy in the reverse direction, ie. from the hard drive to the USB. Obviously it is to safeguard against theft of data. However, I do not deal with any confidential data and like to back up things every few days. Please tell me a shortcut to unlock my USB entirely even though I do not have administrator rights on the machine.
Sorry, we will not assist in circumventing such security features, especially when the machine belongs to someone else.
I cannot know how the bios update so I need some help for the how the bios update.I want to install the newest driver but I can't figure out how the driver is in a .02 file and I can't make heads or tails of it can anyone help me?
astar master said:
I cannot know how the bios update so I need some help for the how the bios update.I want to install the newest driver but I can't figure out how the driver is in a .02 file and I can't make heads or tails of it can anyone help me?Click to expand...
please post the brand/model of your motherboard... I.e.: ecsg41-tm; intel dh55tc; asrock z77 extreme4
Hey guys, I've attempted a bios update through this website and I've been left with this sitting on my desktop for two days and the loading bar has not moved an inch.
I tried to update the BIOS because for the last few weeks when my computer is booting the screen would go blank and just stay blank and I would have to keep resetting until it would finally boot. I was hoping a bios update would do the trick otherwise I would not have bothered.
Im worried if I exit out or shut-down my computer I could corrupt my BIOS. Any ideas?..
I would exit and maybe try again. Thats the download phase which has nothing to do with the actual update process. The download will complete, before any attempts to update will begin. Updating the BIOS can be very risky, updating would never be handicapped by possible problems of downloading.
So recently my machine has been in my backpack travelling with me due few reasons. When I came home today and mounted it all up again, one of my HDDs became RAW system and I am unable to access it. Now Windows keeps insisting that I should format the drive but I really need to preserve most of the saved data.
Iv downloaded TestDisk but have no idea how to use it.
Is there a way to at least recover my files? I really need to get another backup drive to have my important work saved on.
Using Windows 7 x64 Pro.
Shall I let Windows format the drive? Would this make me loose all my data?
I have a asus a8n delexe sli which gaves the above error when I do alt f2 on post to enter the flash utility. I was driven to reinstall bios or upgrade it because I am getting freezing; reboot issues; missing drivers; unrecognised hardware issues etc. I have swapped out drives, video cards, reinstalled OS and even swapped PSU to no avail. So has my motherboard just had it?
I folllowed asus instructions and copied the bios to a floppy disk and tried to flash from that. Although I copied all three files in the downloaded zip so I presume it would select the exe file automatically. I will download again. Should it work if I copied to a blank CD? I presume the bios would automatically pull the exe from any device besides the hard drive? I get this error with or without the floppy inserted?
Did you finally get this solved?
Thanks,..this laptop acer Aspire 4551 start but the display stay black (no video) I'd like to flash the bios,... I've seen some videos but I don't understand very well ,...could you to teach how to do ? step by step please......GOD BLESS YOU
Well, can you even boot up into the machine? Or is it all black?
I have read many posts attempting to solve my own issue all the while failing Some proper assitance will be needed so I needed to create my own post I have a Seagate TB HDD I have been using shows up not BIOS but Windows in HDD for a couple years My girlfriend is a photographer and she filled up HDD shows up in BIOS but not Windows the drive Prior to being able to afford a new one she crashed windows and it would no longer start up Bought a new drive thought my task would be simple however upon booting windows to my new drive the old drive had not shown up I checked the bios and it is visible there The Data on that drive is irreplaceble So by attempting to solve my own issue here is what I have tried -Checking bios for other drive boot options -switching the cables on the drive multiple times -using a different computer -checking disk management -using seagate drive tools -using windows boot disk -using Memory Diagnostic Tools only other method I have read but havent tried is using an external casing in an attempt to get it to apper however I have my doubts on whether that would work If I am wrong please correct me So to be Clear -HDD with essential data on it Seagate TB -Shows up in Bios -Does not show up in Window Disk management or in Seatools Also will not appear for a Windows install disk I appreciate The Help nbsp
Is the 1.5 TB drive the one that had Windows installed to it? If so, it is pretty likely you are screwed.. I mean, there are some options you have, but none have a real high success rate on a drive that has failed.
Check out the tools on Hirens boot CD. Boot from that, and have a go with a few of those tools, that is your best chance now outside of professional recovery. Professional recovery costs will strongly test how "irreplaceable" those pictures are.
Hey I have a gb micro SD card It was Micro SD forgot card... Encrypted password as still is in my Motorola Droid Razr I set it to be encrypted so I made Encrypted Micro SD card... forgot password a decently normal password for it possibly containing letters and numbers I had to restore my phone because of a issue So when I tried to access my microsd card the password saved in cache on the phone was lost since I restored it So Then the forums said that if I installed something called Fexplorer It will then let you access the password through cache aka mmcstore The problem is I dont have that stored in my phone anymore since I restored my phone So all I want to do is be able to retrieve my content on my sd card considering I dont know the password and also remember I cannot access the microsd card via my computer or anything on my phone or computer since the microsd card wont pop up on the phone or laptop unless I input the password So it wont show it exists Please let me no what I can do without losing my content and it wont show up on my computer or phone because it doesnt have my password in it nbsp
I don't know for sure that it does, but if it uses any remotely decent form of encryption then you're going to need to remember that password... it's kind of the point of encrypting it in the first place. If anyone knows differently please chime in.
A few months ago I updated my MSI Z A-GD to the latest BIOS quot vP quot which is still the latest settings Z68A-GD55 update won't MSI overclocking changes allow to BIOS after version on MSI s website as of today Since updating to this version the UEFI BIOS screen is totally different the layout has been changed entirely I was able to find the overclocking settings quickly but since the update the board will not allow me to change many settings All CPU Memory chipset voltage adjustments CPU ratio adjustments bclock adjustments etc are all either greyed MSI Z68A-GD55 won't allow changes to overclocking settings after BIOS update out and cannot be selected at all or they are set to quot Auto quot and that is the only available option for them This is a solid overclocking motherboard from what I ve heard online and I m running a K series CPU k so I m really perplexed as to why I can t even adjust the supposedly unlocked CPU ratio on my k I USED to be able to use these settings before the BIOS flash Also I can t seem to find anyone online who s having a similar problem as me As it stands now the only overclocking I can do is with MSI s quot OC Genie II quot which basically automatically overclocks for me I think this is totally ridiculous why is MSI s automated tool allowed to touch these settings when I can t modify them manually Anyone have any idea what s going on My first thought was that maybe there is a setting somewhere in the BIOS that must be enabled first in order to open up the overclocking settings but I searched far and wide and couldn t find one Any help would be greatly appreciated nbsp
Yeah, I think there is a setting somewhere that is checked to auto. Try exploring all the tabs of the BIOS screen and report back if you find anything.
Hello! I'm new here at Tech Spot. This is a great website.
Where can I get a copy of the newest BIOS update for my motherboard?
Model: Asus P5GD1-VM Motherboard
Onboard Sound: Azalia (swa)
Onboard LAN: Exist (wl)
BIOS Size: 512 K
BIOS Type: AMI
I downloaded all BIOS .ROM files in the official website of Asus. But it weren't compatible with the BIOS to be flashed.
Please help me! Thank you very much in advanced!
The latest BIOS for your board is version 1015. It's not necessary to load each BIOS in order, just load the latest. To load the BIOS you must copy it to a floppy disc and rename it P5GD1-VM.ROM If you didn't rename it, that's why it won't load. On the same Asus download page, you can get the user manual for your board, which goes into detail how to reflash the BIOS. It can render your motherboard un-bootable if you do it wrong, so I would read the manual before attempting it again, and follow instructions carefully.
I upgraded my cpu to a 3GHz cor2duo E6850 from a E4500 2.2GHz
now my pc is stuck on bios logo screen.
When it powers with the new CPU I get one beep then it just sticks on bios logo screen, I left it for 20 minutes.
So I put my old CPU back in and updated bios then it stuck on logo screen witch ever CPU I used.
So then I tried to reset cmos, that's when it really crapped out, no beeps no display.
so then I took my cmos battery out and drained the board put my old processor back in and (thank god) it booted into windows.
Please any help would be greatly appreciated.
Motherboard is a foxconn 45cmx (Bios has been updated)
Anyone have any thoughts
I have a previously functional hard drive that is no longer recognized by the BIOS Other drives are working fine Just not this one It has no scary not up drive in showing Hard BIOS clicking or grinding noises It sounds lovely in fact Normal health read and spinning sounds It even has the gyroscope Hard drive not showing up in BIOS feel if I pick it up Stuff I have tried unsuccessfully Restart the computer Restart the computer again just in case Swap out cabling Use an external power source Use a SATA-to-USB adapter Use a different motherboard Hard drive not showing up in BIOS with a different BIOS and a different power supply Use a different motherboard with the USB adapter Swap out the controller board for a new one--same model and revision but stole the flash memory chip off the old board so it had its calibration information right I m thinking that the platters and read head and all are good I seem to have ruled out the controller board as the culprit Anybody have any ideas what might be the issue nbsp
You've pulled out all the stops. If the BIOS doesn't see the drive, there's not really anything more you can do. Drive has failed somehow. Send back to mfg. if still under warranty. Hope this helps!
My computer is not recognizing my typed command to enter the BIOUS menu during startup. I've tried both wired and wireless keyboards but it doesn't recognize any commands given. Any ideas?
It'll recognise the right one but the problem is this varies between different computer makes and motherboards. There are a lot of possibilities. Try Googling for example - key for bios (Acer). If no joy post back details of the computer model and no doubt someone will be able to suggest the correct key or combination of keys.
Hello guys I have a acer aspire one d250 (kav60) , and I think I downloaded the wrong flash bios file and since then my laptop won't turn on ((( if anyone have an idea what to do please REPLY
Why were you changing your BIOS on a laptop in the first place?
I powered down the machine yesterday (Shut Down) and now this morning the computer will not boot.
When I try to boot the machine the BIOS screen does not appear, the HD light flickers on but then stays off. All other lights on the machine are on as normal. The fan kicks in within 30 seconds and sounds like it's running at maximum revs.
I did a hard reset and reseated the HD and the RAM and replaced the RTC battery without fixing the issue.
I will disassemble the unit and make sure the fan is not clogged, in the meantime does anyone have any thoughts ?
The motherboard has probably failed do to consistent overheating over time...
Anyone have a best practice for user who wants to change there password on there Windows machine (on a domain) and phone at the same time without locking there account?. Most of the time the user change his password on Windows then by the time it change it on his phone his account is lock due to the fact that the phone is trying to login with old password.
Log out on one machine before you change your password on the other.
Log back in with new password.
This post made my brain hurt quite a lot! its like chicken Vs egg ..
Hi I m a new member I recently decided to build my first PC Parts were Asrock Z Extreme MoBo Intel i K - LGA DDR Single stick GB G-Skill GeForce GTX GD OC Seagate Barracuder SATA TB w PSU Now for the problem - BIOS error Extreme update Z77 4 Asrock I installed everything correctly and got to POST so I decided to follow most Internet forum instructions to update my BIOS so I did so over the Internet flash update from the AsRock BIOS setup The problems arose after trying to update it via the Internet Now the motherboard won t even get to POST or show any signs or working Asrock Extreme 4 Z77 - BIOS update error on a monitor the fans for ten graphics card CPU and chassis all work the PSU is working fine But the Dr Debug is showing the status code which states in the description is that it is quot not used quot I don t know what to do iv taken out the graphics card and tried still the same disconnected everything except the socket and all pins are fine on the PCIe slots and RAM Any help would be appreciated ps I have a spare Gigabyte gt GB hanging round and was wondering if I can get the MoBo to work will it be worth sticking the in with the for any improvements however slight until I can afford another for SLI nbsp
"Now the motherboard won't even get to POST or show any signs or working on a monitor" You might be able to get the motherboard to respond by removing the battery for a few minutes. If not, the motherboard may need to be replaced
Hi again I ve been having some problems with my computer lately beginning May which began when I finally got tied of fixing XP I defaulted and asked a local computer store to install Gigabyte 8KNXPUltra, Modular *Award FJ settings with BIOS* Win Home Premium onto my WD Gb IDE drive which I Gigabyte 8KNXPUltra, FJ with *Award Modular BIOS* settings had purchased from them months prior About two or three weeks later my MoBo suspiciously started to fail Not one to cast aspersions I took it back and paid them another AUD to tell me that it was the MoBo then paid another Gigabyte 8KNXPUltra, FJ with *Award Modular BIOS* settings Gigabyte reseller to confirm the same who was Gigabyte 8KNXPUltra, FJ with *Award Modular BIOS* settings intrigued that if you flicked the board on the bench it would re- boot as though someone had been a little over zealous in tending to it So three GA- KNXP with DPS and two GA- KNXPUltra FJ MoBo s LATER I finally attached my WD Gb HDD Win to a new configuration thats the configuration not the MoBo they re all nd hand from my mates in China AND WOW Microsoft Critical Updates Conflicts and my Nvidia GeForce AGP card still not updating correctly Call to Microsoft was within the three day window for validation of install who suggested clean install which is fine as in the three weeks Win was in use I was mostly just finding my way around the newest OS offering from Microsoft The Win boot disc would not load The support staff sugested I download a new Win iso incase the Genuine DVD was corrupted Still not working was suggested the Drive might be the issue just happened that I had a new SSD in the draw Was able to atleast format that using the broken Win I actually believe that if I knew how to change the BIOS settings to reflect what I am trying to get the OS to run installed in the bays of my machine I would atleast have a platform to begin to get a stable boot- to-OS Which the gentle folk at Microsoft would at least have a greater opportunity at a successful transition of OS The board I m using is just too OLD for the young- guns of today I have updated my BIOS using the Gigabyte bios program here I need to know the settings needed to configure the board GA- KNXPUltra FJ here with the Award Modular BIOS v PG copyrighted - to see just the HDD SSD just as conected drives NOT as SICI RAID devices A manual to assist with the CMOS Setup quot Award quot Utility perhaps it might be useful Sorry if this seems to be a RANT Does anyone have any recollection of these times gone by please Edit I had a copy of Ubuntu-KK- and when I ran it as a live CD I found that the SSD that I had set as the Boot from device was prefaced with name sici- ID number of drive size of drive in Kb nbsphttp://www.techspot.com/community/topics/gigabyte-8knxpultra-fj-with-award-modular-bios-settings.188678/
I recently bought 2x4GB sticks of DDR3 ram for my computer only to find out that my motherboard only supports 4BG of DDR3 total. So I started looking around to find out and see if there was an update for my mobo's bios and how to flash it. There is an update for it but I also know if you do not absolutely need to flash the bios you are better off not doing it. The basic situation is if the updated Bios will allow support for more ram, then I can save money by not having to get a new mobo and CPU to upgrade my systems ram. If I am completely off base here let me know but the bios was the only thing I could think of that could effect the capabilities of the mobo.
Flashing the bios will not let your mother board support 8 gigs of ram. If was only design to run 4 gigs
Hello techspot, Basically I think ineed to update my BIOS in order to run call of duty black ops 2, but I Don't know.
Basically when I try to run the game, my pc freeze's then shuts down and says no signal detected, I've been looking all over the inet to try find a solution and came across a forum where people were having the same problem. (They're all using AMD) Alot of the people there said they contacted there motherboard supplier's and asked for a flash drive update or something? to update their BIOS. After doing this they said the game started to work.
my motherboard is a N68-VS3 FX, If someone could link me to the correct update for it that would be grand. im on windows 7 if that helps
P.S , Sorry I think I posted this in the wrong section
Im only asking this because I have a computer that should be able to take 3 gigs of ram. But for some reason all the ram ive tried in it only read as 128 *which could be possible cuz the ram was from old systems* but I just got a 512 stick of ram for it but when it came it reads 128mb as well. They could have sent me the wrong thing but now im wondering if for some reason there was a limit set on it somehow. So im just wondering if thats possible.
Do not just buy RAM randomly, you must know the exact model. Try running this utility: http://www.crucial.com/systemscanner/
The utility will tell you what ram to purchase and the maximum it can hold. What is the model of the PC because there may be a BIOS issue if it is a newer more than old PC.
I recently installed a gigabyte B75M-D3H 1155 mobo, i5 cpu, my pc boots fine but there is no BIOS splash screen at all and it is worrying me. I can boot into win 7 fine, but when I turn the computer on it goes from blank screen very quick (1 second) cursor flash, then windows splash screen. Is something wrong? It has done this since the 1st time I booted it. Going into the Bios there is an option named "full screen logo show" but it makes not difference whether that is enabled or not. My monitor is on the whole time, not waking from sleep or anything like that.
The new MBoards are really fast going through the BIOS Post. I looked at thier site, and there is a utility that lets you access the BIOS through Windows. Install the app, then you can set a post delay.
Really looks like a great board, lots of cool features.
I?ve never had to set the BIOS password, but the kids are growing up and I need to lock access to my PC.
My Bios has two Password Options: Supervisor and User.
The Supervisor password was accepted, and before I attempt to change the BIOS settings, the Supervisor password is asked for.
Then I set the user password.
However, when I boot up the PC, I am not asked for any password and windows loads as usual.
What am I missing?
The BIOS is Award Software International, Inc. F4 HI 07/03/2007
Do you have the option mentioned below?
Setting a BIOS Password
Now you'll want to set your system to ask for that password every time it boots, so select the BIOS FEATURES SETUP option, to see a menu something like this:
Fairly obviously, it's the Password Check option we're interested in, so select it and change the setting to ALWAYS.
etc....Click to expand...
I need help I have a dell dimension e520 and I cant get pass the bios pass word. can someone please help me
Hi Jessie :wave:
Welcome to :grinthumb
You can read how to post a new thread in this Guide.
Before posting you should read all the Posting Guidelines.
To access technical support you may go to the Forums.
Many users like to post system specs in their Profile.
System Specs are always helpful when you seek support, (see the first two suggestions).
And helpers may ask that you post some of your specs in your thread.
You can access many other online TechSpot guides Here.
Enjoy your Stay
My detected and CD-ROM BIOS not HDD in desktop had windows xp installed in it Yesterday I tried to installed XP- sp in it I inserted the bootable cd and repartitioned the whole hard drive Then selected C drive for installing the windows XP- SP then the option came formatting the drive with NTFS CD-ROM and HDD not detected in BIOS format I selected it and C drive was formatted But after formatting the system shows an error The message was quot The drive cannot be formatted due to an error please use another partition for installing windows Then I selected D drive and the same message was displayed again Then it showed that there is an error in installtion and CD-ROM and HDD not detected in BIOS press F to quit setup Then I restarted the windows and tried to changes booting device priority Now in BIOS only floppy drive is being displayed No HDD and CD-ROM is displayed in booting devices But initially before installing XP- SP cd I entered BIOS and changed the priority to CD drive At that time both HDD and CDROM was displayed in booting devices priority I dont know what to do now Every time I open windows now it shows that quot Reboot and select proper boot device or insert boot media in selected boot device quot And when I am entering BIOS and trying to change the boot devices priority neither HDD nor CD-ROM is being displayed there Hows that possible that both HDD and CD- ROM is not detected in BIOS Please help guys Ur advice might be very helpful for me Thanks in advance Regards Vishal nbsp
Hi Vishal, One simple thing you could try, is to remove the BIOS battery, leave it out of the pc for 5 minutes.
Fit it back in the pc, and try again.
Also if that battery is more than 5 years old it may be at a low voltage, so if you have a voltmeter you should get 2.5 to 3V dc, across the battery.
I switched some switches in my BIOS to try to increase performance, and all that ended up happening was that my computer won't boot up AT ALL. Is there some way on a motherboard to perform a hard-reset off all features?
Un-plug the PC from the wall.
If it's a portable PC, take out the Battery.
Last but not least, remove the motherboard battery (usually the size of a small coin) for about 10 Minutes.
All customized BIOS settings are stored in memory powered by a battery and removing the motherboard's battery will default all settings to factory.
Specs AMD FX- GHz stock CoolerMaster Hyper TX EVO in push-pull configuration ASRock Extreme Gigabyte GTX Ti Temps In CELSIUS Ambient room temperature degrees -------------------------------- CPU idle - degrees CPU load - Messing avail in no BIOS... around to degrees ---------------------------------- MoBo idle - degrees MoBo load - degrees ---------------------------------- GPU idle - degrees GPU load - degrees so I built myself this PC a few weeks ago and recently I decided to experiment with overclocking Now I have OC ed my GPU before but have had no experience with CPU BIOS overclocking So in all my clueless glory I tampered around in my BIOS and to my surprise my system booted and worked fine with MHz OC However once I tried pushing it a bit further to GHz It didn t want to boot and I had to reset CMOS Anyway just wanted to ask a few questions Has anyone got any experience overclocking in ASRock UEFI BIOS with an AMD CPU Does the FX- overclock Messing around in BIOS... to no avail well is there anything I should know Should I bother Overclocking at all Thanks in advance for any answers nbsp
You have an unlocked multiplier, are you pushing the front side bus up or are you changing the multiplier to something higher than default?
My windows xp 64 bit runs super slow after windows loading sign and it takes me 2 hrs to open up the desktop and transfer 6 images. I use 2 RAM's of 2gb (kingston DDR2). When I opened up BIOS, it showed 640k as base memory and 126m as extended memory.
There are no details under the computer title if I try to check the properties of computer or maybe it is just taking too much time to display. the desktop is fine, my computer still works but takes hours to do a simple task. it all started all of a sudden. Also I would like to know if 'unganged mode' is fine as it is displayed when the system boots. I tried to check another different RAM on the computer, but still no change, so I am confused regarding the problem.
Hello I was given an hp pavilion media center m x computer and installed windows xp pro Everything works wonderfully except every power on The BIOS always reports the following New CPU installed Please enter setup to configure your system Press F to enter setup Press F to load default values and continue I have Motherboard m n -am se BIOS Version CPU AMD Athlon X I have changed the bios battery BIOS f2 errors f1 flashed the bios cleared the bios and went back in and reset everything and tried loding the defaults from the bios and loaded optimized settings and the cpu is the one that came with the computer I have no idea as to what to do HELP If anyone knows any thing about tattooing a motherboard you know one BIOS errors f1 f2 of the items you have to put in is the featurebyte The featurebyte is normally blocks of characters plus however this motherboard has blocks of characters plus and when I try to update it every thing is written to the dmi file BIOS errors f1 f2 except the featurebyte which gives an error message that featurebyte has too many characters Please if you know how to take care of the bios error message please help me or if you can help me with the tattooing Thank you nbsphttp://www.techspot.com/community/topics/bios-errors-f1-f2.182826/
My son tried to install drivers and a new USB mouse.
Immediately a message "something about a conflict" popped up and the keyboard became unresponsive.
He tried rebooting, still keystrokes have no effect--so he can't log in to remove or reset the driver.
F2 during startup doesn't take you to a BIOS screen, instead, it brings up "Windows Boot Manager"
(We own 2 of the same model computer and F2 is the proper key for BIOS)
F10 works normally
Keyboard uses serial port.
Would removing and reinstalling the CMOS battery be of any use?
Believing that people who post questions on the internet should be courteous enough to post solutions or workarounds, when found, here it is:
I bought a USB keyboard and both it and F2 now work.
Problem is apparently either the serial port itself or the serial keyboard driver--probably the latter.
I had tried 2 different keyboards earlier but both of those had been serial.
Hi Guys Here is my story my friend brought me a laptop that is completely shut down and he told me to fix it I asked boot get computer even I can't the see BIOS cannot -- what is the problem and he said I don t some one gave it to me and I don t know what caused the problem when Looked the laptop I tried turning on but nothing showed up on the screen I plugged the power charger waiting for few minutes I turn on still nothing show up but this time the screen become white for like seconds and then goes back to black I thought I cannot boot the computer -- can't even get see BIOS the system is not getting enought electricity my question here is what are things do you think might cause the system not to boot please list a whole punch problem that might cause the system not to boot and I will go one by one and see if I can figure out here is the laptop information Toshiba Satellite-L -S there is windows on it I believe because I see win sticker on the laptop nbsp
I would suggest testing the mains charger first, if you have access to a multimeter, set it to the 20 volt range and see if the voltage is what it should be.
If that's okay, then it might be time to open up and check connections.
hp x181 continuous restart after bios. ran primary and secondary harddrive test and tested memory. (all passed) i can load bios and run diagnostic test but when i leave bios it just restarts. have anyone heard of this?
Can you perform a "Factory Restore"?
Hello I am new with HP BIOS dv9500 screen come not up will laptop to Tech Spot and this forum and need some help My HP dv Laptop will not come up with bios screeen and therefore will also not boot When I turn it on he indicator lights all come on but the sceeen remains unlit for a few seconds then has a faint blueish haze The disk activity ligh blinks a few times and the CD sounds like it is active Nothing else happens - I can wait for as much time as HP dv9500 laptop will not come up with BIOS screen I HP dv9500 laptop will not come up with BIOS screen want If I CRTL ALT amp DEL it shuts down and comes up again by itself a HP dv9500 laptop will not come up with BIOS screen few seconds later which from my DOS days appears normal and I can repaet this process I have a bootable CD that has a DR dos for a DOS type operating system and the computer will not boot from this CD If I hold the power button down for sec the thing turns off I have removed the drive and tested on another computer via USB interface including using CKHDSK in the DOS mode and then using WEB Root to scan the disks for virsues etc Everything checks out OK I have removed all power DC and AC including batteries Large DC power battery and CMOS backup battery with no Help I have also tried all Fn buttons to see if I could force the Bios Screen to appear in the process of trying to power up described above The memory modules are firmly seated Has anyone heard of a similar situation The ooperating system is Vista nbsp
I would say that the motherboard is the cause of this. The CPU cooling heatsink could be in need of new thermal paste or pads. The fan could be bad
Hi, when I push the power button on my Asus k50ab all I can see
is a black screen and the power light on.
1. Windows doesn't start at all.
2. Even when I tried to start with my RAM removed it's the same, only black screen,
no sound, nothing.
3. I tried to shuffle my RAM around in any possible combination is the same.
4. I also tried to start with my HDD removed, its the same.
5. I tried (quite a lot) to remove the battery, unplug the cable then
press the power button for 60 seconds and then start without the battery,
but sadly no result. Even tried it with my lid in the lowest angle possible.
6. I also tried to plug a monitor to my laptop (I did also press Fn+F8 to change
displays), but still nothing.
If anyone has any idea whats going on I'll be very thankful.
hi dont quote me on most as not qualified and sure someone will get to u soon but can u see anything faintly in the back ground as i had that prob and notice at certain angles if i looked close enough i could see .. it turned out to be my lcd cable if screen is totally black could be number of things like cable inverter backlight or actual screen .. sure a tech will see this soon
i am unable to reset my router back to default username/password setting.ive been able to reset it in the past, but i cant remember what i did.
i have held the reset button down for 90 secs. then i unplugged the router while still holding down the reset button for an additional 90 secs. and finally plugged the power back in again still holding the reset button for an additional 90 secs.
ive tried switching between different web browser. default gateway is 220.127.116.11
tried using cmd prompt. used ipconfig /release. ipconfig /renew. just for the heck of it.
ive also read that this same model and version is giving alot of people trouble as far as resetting it goes.
honestly, im not sure what firmware i have installed. im not sure how to check it... if that may be the issue.
while trying to login to router via firefox, i get the security level 15 message
cant remember my username/password
Sounds like your router needs a hard reset, the following has helped me in some cases, but be aware, if these procedures don't work, than your router has gone bye bye, it's junk.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If there's some time left on any type or warrenty for this device, I would recommend using it, that is if in fact your router is dead.
Good luck.............hope this helps!
Hello brothers .iam using p4 ibm system i have a problem when iam starting my computer when i start my system it shows a problem . Security kyboard is locked and when iam pressing f1 or f2 its not working and computer is hanging what to do plz help me iam very worry
At what point is the computer stopping? During BIOS, after BIOS whilst loading Windows, or once Windows is loaded?
Please walk us through what happens after you press the power button.
Was the PC previously running fine, or is this a new computer you have just purchased? Also, can you recall anything you might have done immediately prior to this happening, if it was working previously?
I have been stuck to a peculiar problem. Let me discuss the situation. I Have got the following configuration: Asus motherboard with Intel Dual Core processor, 2 GB of DDR2 RAM and one 80GB P-ATA and one 500 GB S-ATA HDD. I have installed Windows in the S-ATA HDD and decided to use the P-ATA HDD as additional storage drive. Now the problem is, sometimes the system cannot detect the P-ATA HDD, and sometimes when it detects it appears as Primary IDE Slave and in that case the SATA drive disappears from the boot priority drive list in bios setting. So the system cannot boot. Presently I am using my PC without connecting the P-ATA drive. But I want to use both of them. In this situation can u masters help me out of this problem? Thanks in advance........ Kabiraj.
Is the BIOS updated to it's latest firmware?
Alternative solution would be that you buy an pata HDD USB box and put the pata HDD in there.
My dad's Dell Studio 1537 laptop hanged during a bios update, so the bios chip is fried. I want to desolder the chip and replace it with a preprogrammed new bios chip, but I'm not able to indentify or locate which EEPROM is the bios chip.
Anyone with tips how to identify the right chip?
I got a reply from the website that sells the chips and they identified the right chip for me based on a picture I've send them. In case someone else has the some issue: it's the chip on the back of the mainboard next to the large chip with the label ITE.
The id of the chip is:
MX - 15G
I want to use virtualbox software it says in settings that you need to enable the virtualization option in host system to add more than one cpu.But in the bios i was unable to find the option.Please help me.
may not support it. make sure you look up the processor you have and check if it supports it.
Windows 7 64-bit
Motherboard: F1A75-M Asus
Hard Drive: Seagate Barracude 7200 Sata 3.0 320GB
Processor: Llano AMD A8-3850 2.9GHz Quad Core
Memory: 12gigs DDR3 1600MHz Corsair Vengeance RAM
Video Card: EVGA GeForce GTX560Ti - 2gb GDDR5 - 256bit
(Dual Monitor - DVI)
Power Supply: 600w Corsair
When I boot or reboot my screen remains black for about 3-5 minutes and then Windows will boot.
I do not see my boot screen (where it says "Press DEL to enter BIOS" ), nor am I able to boot into Safe Mode holding down the F8 key.
Any ideas on what could possibly be causing this?
The system is brand new, and windows was just installed for the first time about 4 days ago. I have never been able to enter BIOS or start in Safe Mode.
Take out the 560 and boot.
I have a dell vostro 1500 needing a fresh install of xpi got from a friend who had for some reason taken it all the way apart and when he put it back together the screen stayed black when you turned it on. i fixed that, but the keyboard will not work at all so i can't access the bios to change boot order. I have taken back apart and everything seems intact. I am assuming a usb keyboard will not kick on in time to let me access it either. . . so i am stuck
"I am assuming a usb keyboard will not kick on in time to let me access it either"...
Try this before you say you are stuck... Keyboards are cheap. Check them out on EBay
Issue resolved ^^ Moderator may remove, thank you!
It would have been better to have left your question and then posted the solution that you found. That way others might benefit from your experience.
Hi Recently I added additional internal HDD WD TB SATA MB Green as a secondary storage The original SATA cable connector is SATA - WD TB SATA - Samsung DVD-RW SATA - Empty SATA - Empty SATA - eSATA connector cable from computer s casing - Empty SATA - eSATA connector Cable from Computer s Casing - Empty I rearranged the cables to SATA - WD TB SATA - WD TB SATA - Empty SATA - Samsung DVD-RW SATA - eSATA connector from computer casing - Empty SATA - eSATA not BIOS Internal SATA detecting optical drive DVD/CD connector from Computer Casing - Empty Once done the motherboard BIOS only detects both the HHD It doesn t detect the DVD-RW anymore BIOS not detecting Internal SATA DVD/CD optical drive Before this both the HDD and DVD-RW was working fine I tried changing the DVD-RW s SATA cable to a new one tried connecting the DVD-RW in other SATA port but still same Note I didn t change any setting in BIOS BIOS Setting In quot Standard CMOS Features quot all IDE Channel - is set to quot AUTO quot hardware detection In quot Integrated Peripherals quot - PCH SATA control mode is always been AHCI - SATA Port - Native Mode is always been Enabled Please help me to solve this problem I want the BIOS and Win to detect the Samsung DVD-RW as well My system CPU Intel i - Ghz MB GA-P A-UD P rev - BIOS Ver F VGA Sapphire Toxic HD G RAM Corsair DDR GB MHz OS Win -bit SP Power Supply W Hard Disk WD TB SATA MB Black WD TB SATA MB Green Optical Drive Samsung X SATA DVD-RW Drive Model SH-S C nbsp
Apart from the detection on the screen, does the drive seem to work normally? If so, I would leave it alone.
If not, the drive has likely failed... it doesn't take much for an optical drive to go bad.
Final test? Does it work in another computer?
I ve recently upgrade my graphics card on my Compaq and I think my watt power supply may be struggling I haven t upgraded it yet and I was trying to refrain from doing that which is why I purchased the ATI hd gb Gddr It seems to be the best bang for your buck as far as cards that really don t need a upgraded power supply at least from what I ve been reading I was trying to adjust my power settings but I just can t seem to find the option to get into the bios F is for system restore F is boot menu and ESC is settings I went to ESC to check the settings but there isn t anywhere to adjust bios in there I tried all the other F keys with no luck I know I could probably go to a HP compaq support forum but I figured since I m up here a lot of HP/Compaq? BIOS how know a enter the to Anyone and there are a lot of PC gamers up here also I could ask I have upgraded the computer to the max RAM that it supports which is gb spd and it does have a AThlon dual core processor so while it isn t a monster gaming PC by no means I think it would be a decent mid-range one Any thoughts on how to adjust power settings in Anyone know how to enter the BIOS of a HP/Compaq? bios I have the Ati Catalyst Control Center but there isn t anything in there to adjust power settings or devert voltage for the card I tried MSI after burner but the voltage set up is locked I ve read that ATI cards lock their voltage settings is this true Thanks for any input I m usually a console gamer but I m trying to enter the PC gaming market Yeah I know I could buy a better PC it s just that I ve already had this one so I figured what the h ll nbsp
I haven't looked up the power requirements for a 6670 but I think I can safely say you'll need a new power supply, preferably a reliable brand. If you still wanna get into the bios you could try the "delete" key.
I just try to install KOMPUTERBAY 1GB DDR DIMM (184 PIN) 400Mhz PC3200 DDR400 DESKTOP MEMORY on a EMachine T3120. With 2 sticks of mem, it started beeping and it would not boot. With one stick it will boot but after a few seconds it will go to the Blue Screen of Death.
When I replaced the 512mb ram original it all went back to normal. I thought I had the wrong RAM since it look different from the old (see attached picture) but I was told I might had to do something to the BIOS. Any ideas?
Your're gonna have to look for a long time... It is time to change out of that eMachine into something you can learn on, and enjoy. The life expectancy of eMachines among our clients has been very short.
There isn't anybody at eMachines that can help you on this issue either.