Windows Support Forum

Admin Password or Power on Password problems

Q: Admin Password or Power on Password problems

1) HP Pavilion2) Windows 73) Enter Admin Password or Power on PasswordSystem disable 85098761

Relevancy 100%
Preferred Solution: Admin Password or Power on Password problems

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 41.28%

Please refer to the message below for information on how to remove your Dell laptop BIOS password. The information also applies to other manufacturers and summarizes a wealth of data collected from previous threads and thousand of posts related to this problem.

We no longer support any further discussion on this topic as we believe all the free help that could be given is already out there (the post below sums it up pretty well). You can always go back to your system manufacturer for support, as well as google for the dozens of third party paid support providers that are available online.

Summary of laptop password help thread:
http://www.techspot.com/vb/topic109612.html
 

A:Dell BIOS password removal. Read this first BEFORE posting.

Mobile Password Help

The following support information and downloads, are provided to help members freely remove their laptop password
If all options have been tried and you still require help removing your password, search Google for 3rd party alternatives
TechSpot forums and all support is provided freely at all times, it is against our guidelines to link to external paid services
You are advised to try any or all options, with your first point of contact being the laptop manufacture, being the best option

TechSpot forums are FREE and manufacture support only

Click >Dell Support and System Information for a particular Service Tag

> Click > HP Live Chat, Drivers, Warranty and Support Information thread

> Click > Toshiba BIOS Setup / BIOS settings -- access instructions
Reset password on Satellite A205: http://www.techspot.com/vb/post613153-2.html
Reset password on Satellite A100 / A105: http://www.techspot.com/vb/post572530-1.html

Password types :

Power On Password (pop). this password can be reset by unplugging the cmos battery for a while, and plugging it back in.

Supervisor/bios Password (svp). this requires reading the eeprom chip (8 leg or 14 leg) with an electronic device by using another pc's serial port or by paperclip method if model type available.

Hard Drive Password (hdp). this is usually tied to svp, but not all the time. it requires special software and a library of known manufacturer's password. but can be cracked either recovering the data or wiping the data.
Transfer of Product Ownership
US: http://support.dell.com/support/top...tag_transfer?c=us&cs=19&l=en&s=dhs&redirect=1
International: http://support.dell.com/support/top...ansfer_form1?c=us&cs=19&l=en&s=dhs&redirect=1
International warranty contact phone numbers
http://support.dell.com/support/top...dellcare/international_travel?c=us&l=en&s=gen

Old closed threads, with lots of info:
Dell BIOS password removal (Jun 07 - Sep 07)
http://www.techspot.com/vb/topic79263.html (543 replies)
HP / Dell / etc. Laptop password help thread (Jan-Mar 2008)
http://www.techspot.com/vb/topic97423.html (533 replies)
HP / Dell / etc. Laptop password help (April - July 2008)
http://www.techspot.com/vb/topic59293.html (937 replies)
HP / Dell / etc. laptop password help thread (Aug 08 - Apr 2009)
http://www.techspot.com/vb/topic109612.html (2200+ replies)

Downloads

Dell Manuals :
http://support.dell.com/support/systemsinfo/documentation.aspx?c=us&l=en&s=gen&~cat=12#12

DSTCD.iso : (Release date: 22-November-2005)
http://www.savefile.com/files/2063585

"Paperclip Procedure"
HTML Document: http://web.archive.org/web/20031103020606/http://qasimtoep.tripod.com/dell/dell6.html
PDF Document: http://www.savefile.com/files/2059217

laptops unlocked: http://www.techspot.com/vb/post645683-913.html
Chip 24C02 24C04: http://www.techspot.com/vb/post698486-1134.html
Dell IC Numbers: http://www.techspot.com/vb/post645922-916.html

SvcTag.exe :
ftp://ftp.us.dell.com/utility/svctag.exe

Asset.com :
ftp://ftp.us.dell.com/utility/asset.com
Command line Uses => asset /? (eg Asset /o for owner tag)
CmosPwd :
http://www.cgsecurity.org/wiki/CmosPwd

Attachments
HP OldPass .zip includes:

[*] unlock6.exe (made in 1997)
[*] BIOS_PW.EXE (made in 2003)
[*] HDD_PW.EXE (made in 2003)

HP Oldpass2 .zip:
As above, made as a copy, using another Zip program

Dell Latitude .zip:
D35B password generator (old generator)

Dell MasterPW .zip:
D35B password generator (old generator)
How to use

 

http://www.techspot.com/community/topics/dell-bios-password-removal-read-this-first-before-posting.90285/
Relevancy 20.21%

Power outage due to storm. Came back on without pictures and documents. It's an HP desktop. Would a file recovery program work? I've tried some of the instructions online, but they don't work.
 

A:Lost pictures on Windows 7 from power outage

Oh mary; I feel your pain. Were the pics within one folder and now they're ALL missing?
 

http://www.techspot.com/community/topics/lost-pictures-on-windows-7-from-power-outage.217351/
Relevancy 20.21%

Hello,

My laptop wont power on at all.
No charge light.
No light when power is pressed.

Was working fine yesterday.
Have tried battery and charger from identical working laptop to no avail.

Any ideas? I can usually fix laptops etc but if it wont power on at all I'm lost.
 

A:Dell Latitude E6520 won't power up (no lights at all)

Did you try removing the battery and AC adapter and holding down the power button for 30 seconds. Then re-installing the battery and try booting again?
 

http://www.techspot.com/community/topics/dell-latitude-e6520-wont-power-up-no-lights-at-all.196334/
Relevancy 15.05%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
 

http://www.techspot.com/community/topics/problems-with-wireless-network-adapter.188964/
Relevancy 20.64%

Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened I finish tower Power will not work button My the pc and My tower Power button will not work when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F PANEL cords u know the pwr switch and all that jazz turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading P S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds nbsp

A:My tower Power button will not work

You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
 

http://www.techspot.com/community/topics/my-tower-power-button-will-not-work.203422/
Relevancy 20.64%

I have an older eMachines Desktop PC model EL1360G which has a 200 watt power supply.
I would like to upgrade it to at least a 400 watt power supply.
Does anyone have a suggestion as to where or what I should buy? I watched a few videos on youtube on how to do the replacement but how do I know all the plugs on the new unit are the same and will fit? Because if they don't, I'll be more confused than I already am.
 

A:Emachines power supply upgrade

Check and make sure all the connectors are the same as the ones you have

I'm not certain if the image above is what you have but I'm thinking it is.

Image above looks to have:

1x 20pin+4pin (ATX Power)

1x 4pin (P4)

2x SATA power
Does your power supply have these and only these?
 

http://www.techspot.com/community/topics/emachines-power-supply-upgrade.216503/
Relevancy 14.19%

AMD has released an updated statement regarding the noise issues experienced by the initial buyers of its Radeon R9 Fury X graphics cards.

Read more
 

A:AMD issues updated statement regarding Radeon R9 Fury X noise problems

Are they saying "screams like a banshee until we smothered it in glue"? Does anyone have a more engineered approach to the issue - like decibels at a specific distance?
 

http://www.techspot.com/community/topics/amd-issues-updated-statement-regarding-radeon-r9-fury-x-noise-problems.216306/
Relevancy 15.05%

It's been a while since I've posted but I've obtained most of the Sims 2 and I TRIED to install Double Deluxe but for some reason my dvd drive isn't recognizing the disc. It spins up and tries to read it, but doesn't do much in the line of effort to read it.
There are no scratches and I took care of the smudges with a cloth. Still unable to read the install disc. It'll read the promo/bonus disc and play it just fine though.
The computer is a Windows 7 with an HL-DT-ST DVD+-RW GT60N Drive.
I have enough RAM, Graphics and other things to run it.
300 Gigs of Space left on the HDD. No idea what's going on here.
 

A:Sims 2 Double Deluxe problems

You might have a bad optical drive. Does it work with other DVDs (DVDs not CDs)? Do you have access to another DVD drive with which to substitute for testing purposes?
 

http://www.techspot.com/community/topics/sims-2-double-deluxe-problems.216270/
Relevancy 15.05%

I have a linksys router that has stock firmware and I can get into the config by 192.168 etc but I can't get it to see the internet. I have a isp that gives dhcp ip so no login needed. Any ideas?
 

http://www.techspot.com/community/topics/problems-with-wrt-54g-linksys-router.215894/
Relevancy 15.05%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
 

http://www.techspot.com/community/topics/building-computer-boot-up-problems.215853/
Relevancy 20.64%

Hi guys, new here...I'm setting up a new pc, sooo a few questions here.
I'm planning on getting an Asus A88XM-plus motheboard, Amd X4 860K cpu and Sapphire R9 280 3GB video card...so how much power supply would be enough...450-500W?..would 650 be an overkill? Is all of this fully compatible?
Do I need a sound card, modem or special cooling or something? ( I already have 2*8gb Ram sticks and HDD, don't really need DVD drive).
I'm also thinking in between Antec 902 V3 case and a lot cheaper LC Power Gaming 975b Air wing Midi...how much quality difference is there in between these two?
Also, how much improvement is there in between this card and my current one, sapphire r7 265 2gb?
Are there anything that you would exchange for something else...I'm on a tight budget, but I don't mind spending a few extra bucks if it be worth in the long run.
Thanks in advance.
 

http://www.techspot.com/community/topics/how-much-power-supply-is-needed-here.214794/
Relevancy 20.21%

Microsoft showed off a whole range of new PCs and devices running Windows 10 at Computex 2015, but one that really caught the eye is the Quanta Compute Plug, an entire PC integrated into a power plug the size of...

Read more
 

A:Microsoft shows off PC integrated into power plug

They may be handy to a lot and even have very reasonable prices but I can't imagine myself ever wanting any of these.
 

http://www.techspot.com/community/topics/microsoft-shows-off-pc-integrated-into-power-plug.213681/
Relevancy 14.62%

Basically I think it s Laptop Samsung Ultrabook Series 5 Problems; been happening for a month now My laptop screen glitches - the images distorting and sometimes green text appearing - Laptop Problems; Samsung Ultrabook Series 5 before Laptop Problems; Samsung Ultrabook Series 5 righting itself and crashing The only way I can get the Laptop Problems; Samsung Ultrabook Series 5 laptop to function again is to turn it off via the power button or take the battery out and put it back it again It has also become slow starting up - taking at least five minutes before you can log in and then a further five before you can actually do anything The cursor sometimes gets stuck in the center of the screen - I can access things using the tab screen but the cursor won t move whether I use the laptop touchpad or my USB mouse The fan has also been sporadically speeding up before calming down again - even though I ve been doing the same thing for the past god knows when I ve done a boot-up scan using avast had a look through all of my files and gotten rid of any old files that I don t need on there in an attempt to create some space but I ve got about - gb free so I can t see why that should be a problem Nothing happens before the glitches crashes so I don t think I m causing it by moving it and so on About a month ago the charger port was fixed at a laptop repair shop and then the laptop itself was sent off to SAMSUNG to have the motherboard replaced because I mistakenly wiped the bios since one driver update shut the laptop off in the middle of the bios update so I don t know if something is loose and so on I m planning on selling it in a month or two so it s not that much of a problem but of course I don t want to sell it to someone if its being a pain in the backside I also switched from integrated graphics to a nvidia geforce graphics card that is in the laptop when I bought it so that might be why Basic Info Samsung Ultrabook Series Intel Core i GB Ram TB Hardrive bit Operating System NVIDIA Geforce GT M nbsp

A:Laptop Problems; Samsung Ultrabook Series 5

This sort of problem is tough to troubleshoot over the internet. It could be quite a few things that could cause the symptoms that you're experiencing. With that said, I'd probably start with updating the discrete GPU drivers. Since you did switch from integrated to discrete, this could be the main cause for the graphic glitches which is probably crashing the system.

Moving forward, I think you should download something like CPU-Z to monitor the CPU load and temperatures during the crashes. It could be that your CPU is overheating and could use some attention.
 

http://www.techspot.com/community/topics/laptop-problems-samsung-ultrabook-series-5.213703/
Relevancy 20.64%

Hi, Guys (And Gals) I'm attempting my 1st PC build and HAVE used the various online power supply calculators... however I'd like to hear some feedback from you all. No matter where I look online I always like to come here to be sure. My specs for the build are as follows:

MoBo: GIGABYTE GA-F2A68HM-H FM2+ USB 3.0 MATX
Amd A6 5400K 3600Mhz Blk Edt 1mb 65w Socket FM2


Video Card: XFX RADEON R7 240 2GB DDR3 LOW PROFILE
RAM: ADATA XPG V1 DDR3 1600 4GB

HDD: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G

I would really like to use one of the 350W or 400W power supply I stripped from my previous PC's. I'm thinking of hooking it to an HDMI or VGA projector eventually though (Haven't bought it yet) Can I get away with one of these and play a game like World of Warcraft? or do I need to order something like the
SolidGear 650W PS2 ATX Power Supply on Tiger Direct?

Thanks in advance for any advice & thoughts
 

A:1st Build Power Supply Question

Over engineer the PS;

Calculate the actual needed power,

add a fudge factor and

multiply by 1.5.
Then round up to the next commonly available size
 

http://www.techspot.com/community/topics/1st-build-power-supply-question.213326/
Relevancy 15.05%

I have a keyboard that has been working fine last night then this morning this happened:

When I type o it types o+ and when I type l it types l and enter (the key)
So this makes it extremely hard to get anything done, please help, thanks
 

A:Keyboard problems

How old is the keyboard? Sometimes "gunk" gets built up under the keys and can cause the keyboard to start failing. Have you tries to remove the keys (or take the keyboard apart) and properly clean it? There are plenty of tutorials (video and non-video) available if you are unsure of how to clean a keyboard.
Regular cleaning on all computer parts will extend the life of those parts.
 

http://www.techspot.com/community/topics/keyboard-problems.213578/
Relevancy 20.64%

Here's the situation. I have this old mITX computer I built a few years ago that I'd like to hook up to Dad's big-screen TV so he can Skype from his living-room. Problem is, the computer is VGA only and his TV is HDMI only. The MoBo has just one PCI (not PCIe) slot with a maximum output of 75watts.

I tried a PCI video card with HDMI output, but the slot couldn't drive the card. Didn't even detect it.

I believe DVI uses less power (the cards are definitely cheaper), and I could just use a simple DVI-to-HDMI cable. A native HDMI port would be better. As long as it works, I don't care. But w/o an external power input, the card can't draw more than 75watts from the PCI slot.

Anyone know of a card that fits this very specific bill? Thx.

ADDENDUM: PC only has a tiny 300watt PSU.
 

A:I need a PCI (not PCIe) DVI card (either <75w or w/power input)

Check this one out: Zotac GeForce GT 610
It is a PCI Card (non express) that has DVI / VGA / HDMI. It is also a Low Profile and requires a 300w power supply or higher. It looks like it should work with your situation.
 

http://www.techspot.com/community/topics/i-need-a-pci-not-pcie-dvi-card-either-75w-or-w-power-input.212458/
Relevancy 15.05%

For about the past month or so, my W7 tower on DSL occasionally loses its connection to the internet so I right click the the icon in the notification area & click trouble shoot & it reconnects yet my iPhone & Ipad remain online no problem.
Why?
 

A:Intermittent DSL connection problems

Clearly the router is doing find and the activity on W7 IS THE ISSUE.
Examine carefully what was active when the connection was lost.
 

http://www.techspot.com/community/topics/intermittent-dsl-connection-problems.207951/
Relevancy 20.64%

I recently moved my computer from one side of my desk to the other and somehow it managed to make it so when I press the power button nothing happens. I've disassembled and reassembled the computer numerous times and tested the psu. The psu is working and it seems like the motherboard is the culprit. What is confusing me the most is that when I short the 24 pin connector to the motherboard then plug it in if I also press the power button I can turn on the computer. I dont see that as a permanent fix just in case it sleeps and I assume it is not good for the computer so I am looking for help on how to permanently fix my issue. Thanks in advance.
 

http://www.techspot.com/community/topics/computer-will-not-power-on-after-i-moved-it.212377/
Relevancy 20.21%

Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.

I need help as fast as possible

Thank you
 

http://www.techspot.com/community/topics/dell-optiplex-620-connect-power-reset-buttons.212270/
Relevancy 20.64%

Hi!

I've got FSP Aurum Pro 1200W.
What UPS should I buy for that power supply if we assume that it has 100% workload?
 

A:UPS for 1200W power supply

See watts to KVA calc: http://www.rapidtables.com/calc/electric/watt-to-kva-calculator.htm

issue: what is the power factor?
see http://en.wikipedia.org/wiki/Power_factor#Power_factor_correction_of_linear_loads

hint: PF ~ 0.75
 

http://www.techspot.com/community/topics/ups-for-1200w-power-supply.212134/
Relevancy 20.21%

HI, I was wondering if it is safe to use an atx psu on a motherboard with an eatx power connector. The motherboard has a 24-pin eatx and a 4-pin atx 12v connector. I bought the motherboard and started using an atx psu and everything seems to work ok then realized after it was an eatx power connector on the motherboard. Are there eatx psu's? Thanks
 

A:Safe to use ATX PSU on a motherboard with an EATX power connector?

EATX is a form factor (12"x13") not a power connector. I'm assuming you are talking about using a PSU with a 20 pin (old ATX) connector with a newer motherboard that has a 24 pin (current ATX) connector. If that is the case you will need to consult your motherboard's manual. Some 24 pin boards run fine with only 20 pins some don't. The issue is that each pin in only rated to carry a certain amount of current (Amps). If you overload one of these pins your risk burning or melting the ATX connector on either the PSU, Motherboard, or both.
 

http://www.techspot.com/community/topics/safe-to-use-atx-psu-on-a-motherboard-with-an-eatx-power-connector.181034/
Relevancy 20.64%

Hi,
I want to learn how to manage ARM processor power management with LINUX (for example the Cortex-A53 MP Core).
Can someone recommend literature, a tutorial or web based information?
Thank you in advance
Manfred
 

http://www.techspot.com/community/topics/arm-processor-power-management-with-linux.210897/
Relevancy 43.43%

My laptop keeps asking me for my facetime, icloud and messages password. I've entered the password but it keeps popping up. Even if I enter the wrong password it accepts it and asks me again in about 30 seconds. I have a Macbook Air but I don't know what system it is though. What can I do to stop this?
 

A:Laptop keeps asking for password

*IF* you would register, we might be willing to assist
 

http://www.techspot.com/community/topics/laptop-keeps-asking-for-password.210631/
Relevancy 15.05%

I have a Dell Optiplex 330 which has a 2.0 dual processor with 4gb of ddr2 ram. I have windows xp installed and I have a video card that has 1024 mb of ram. I am unsure of the brand of video card or further specs. I bought it off of ebay some time ago.

My problem is that when I try to play streaming video it wants to freeze a lot. I have already given more space for the virtual memory on my computer: I think 4 to 8 gb and I have set my hardware acceleration way down but these changes haven't helped.

I can download and play movies fine, I only seem to have problems when playing streaming video like from hulu.com or letmewatchthis.com which directs you to sites like: putlocker, deditv, sockshare, loomba, etc. I have used other computers and they don't seem to have as much problems with this so I hope that somebody knows what I need to do to solve this problem. Thanks in advance for any help.
 

A:Freezing problems with streaming video

When you say freezing, do you mean just the video freezes, or the whole system? If its just the video, it could have something to do with your internet connection. Is the computer on wired internet or wireless?
 

http://www.techspot.com/community/topics/freezing-problems-with-streaming-video.164671/
Relevancy 20.64%

I was given a year old Corsair power supply XMPSU- TX-C I wanted to make sure it Questionable Power Corsair Supply s working right before plugging it to a motherboard So I did the paper clip power on trick and all the voltages were ok I proceeded to connect just one harddrive The harddrive spins up and then Corsair Power Supply Questionable makes a revving noise every second as if its powering down and back up repeatedly Also theres a green LED light on the harddrive that blinks normally its a solid on This doesn t happen every time I cycle the power supply however When the harddrive powers up properly the LED light is constantly on and rpm is constant I tried two other harddrive with the same outcome The problem is definitely intermittent I connected all three harddrives with the same results I tried the same setup with two other power supplies with no issues at all I am now sure the issue is specific with the Corsair power supply Is it because there s not enough load on all rails making the power supply unstable The AC current draw was only mA so it wasn t the overcurrent protection kicking in The V line was steady Corsair Power Supply Questionable but the V line fluctuated a few hundredths of a volt in unison Corsair Power Supply Questionable with the harddrive revving The V line was steady when the harddrive powers up normally I m hesitant to connect a full computer to this Anyone have an idea before I try to RMA the power supply Is this just a peculiarity of this model nbsp

http://www.techspot.com/community/topics/corsair-power-supply-questionable.209459/
Relevancy 20.64%

I am looking to get a new graphics card for my computer because atm it has integrated graphics, which as most of you know sucks. The power supply is 250W which I doubt would be enough to have a whole new graphics card implemented. The model is p6166f. The mother board has this for a graphics card slot PCI express 16x GPU. Please give me suggestions, I am looking to spend approximately 150 - 200 $ total.
 

A:Looking for new Graphics card and Power supply

We need to know who made your system. How old is your system?
 

http://www.techspot.com/community/topics/looking-for-new-graphics-card-and-power-supply.209241/
Relevancy 20.64%

So I've been thinking about upgrading my GPU from a GTX 760 2gb to a GTX 980 but I'm not sure if I have to buy a new Power Supply aswell. I'm using a 650W power supply.
My specs are: MSI motherboard(forgot the name), 8GB ram DDR3, SSD 200GB, HDD 1TB, DVD-RW, 2 120mm fans + the CPU fan , a core i5 4670k (3.40 ghz) and the gtx 760 itself.

Thanks
 

A:Should I upgrade my Power Supply?

Try this out; http://www.extreme.outervision.com/psucalculatorlite.jsp
 

http://www.techspot.com/community/topics/should-i-upgrade-my-power-supply.208171/
Relevancy 21.07%

my laptop HP g61 does not power on either with battery or when connected to the mains supply(AC). whenever i press the power botton the battery lit in the front of the system will only blink for about 3 seconds without the system been power on(the fan,the keyboard light nor the power botton lit will not on) i try to remove the battery nd press the power button for 30 secs before putting it back,still their is no respond. but i discovered each time i remove the battery and plug it to the Mains,the indicator power light beside the plug of the system will lit for about 3 seconds before it went off again.i have checked it with another charging adapter all to no avail. pls ,help me out.
 

A:My laptop HP G61 does not power on

Perhaps you have one of those infernal HP laptop motherboard problems? How old is your HP g61, and have you kept the cooling channels free of lint and dust? How old is the hard drive?
Since it doesn't work from a battery or from wall power, you should have an experienced tech take a look.
First thing I would do is remove the hard drive, so you can rescue the data if need be.
Then I would remove the battery, and try again from the Mains. If nothing, then there is some real work ahead. Consider this a major failure in that case, and get expert help to take a look.
I doubt there is a quick fix.
Please keep us informed as to what you learn and what helped get your HP G61 back up and running.
 

http://www.techspot.com/community/topics/my-laptop-hp-g61-does-not-power-on.176272/
Relevancy 15.05%

Hello all...I'm having problems with my Dell PC. I just purchased a sweet new scanner (ScanSnap SV600) and when I scan a lot of pages at once, I get an error message saying I'm out of storage and to restart the computer. The specific code given is 0x8007000E. I've also been noticing when I run a few web tabs at once, sometimes they just go black and I need to restart the browser. It has 8GB of RAM and all the drivers are updated. Anything I'm missing? Thank you kindly!

Dell Optiplex 790
[email protected]
8GB RAM
Win 7 Pro
 

A:Memory Problems?

How much storage space do you have? From what I could research this error is tied to programs demanding a great deal of memory. You say this occurs when trying to scan a lot of pages at once. Does this occur when scanning less material at once? Have you tried updating your drivers for the scanner?
 

http://www.techspot.com/community/topics/memory-problems.208487/
Relevancy 20.64%

I know we had a thread on this in April of last year but what I really want is a poll so I can quickly see the numbers. What I'm trying to see is how many people are running 3 core machines and how many people have 6 core procs. Keep in mind I want to know actually cores, not the number of simultaneous threads you can run. Also, if you're using a multiprocessor machine please add up your cores. Also, if you have a triple core machine but it's not your primary I would appreciate it if you would post so in the thread.
 

A:How many cores power your primary machine?

Work related question or just curiosity?

I run 2 cores now in almost everything I physically use. I have a single core system that runs and does stuff for me nearly 24/7, but I almost never sit in front of it.
 

http://www.techspot.com/community/topics/how-many-cores-power-your-primary-machine.171334/
Relevancy 14.62%

See picture below. Any ideas? Ive cleaned the rollers, and the main charger, and pretty much anything else I can find in the copier. Havent replaced the toner cartridge though. Originally there was toner all over the place and the dotted line was a solid black line. Performing the aforementioned maintenance items got rid of the thick black line but now this remains.

Any help is appreciated
 

http://www.techspot.com/community/topics/kyocera-km3530-copier-copy-problems.207362/
Relevancy 43%

I have a toshiba satellite C870-11H. It used to ask for the password whenever it went to sleep. I checked and the system is still set to do so.

Some time ago I got fed up with the clowns at Microsoft thinking their latest update was more important than whatever I happened to be doing and destroying the work I was doing so they could load their rubbish. I set the system to ask me before doing an update. Well it doesn't bother to do that and now very rarely it does load an update without authority. Could it be that my system is now way out of date?

Is there a customer focused operating system that I could use instead?

Thanks.
 

A:Laptop stopped asking for password

Every OS is customer focused. Microsoft is for non-Mac machines and getting things done. Linux is more powerful but requires more techy-ness to use.

Maybe try Mac OSX.

But there's nothing wrong with Windows. Sounds like you have a decent amount of problems.
Run WIndows update, make sure it's completed every update.
Run CMD.exe in admin mode, run sfc /scannow

 

http://www.techspot.com/community/topics/laptop-stopped-asking-for-password.204405/
Relevancy 41.28%

Hello all,

I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
 

A:How to change the Wifi password of an ADSL modem without a computer

Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
 

http://www.techspot.com/community/topics/how-to-change-the-wifi-password-of-an-adsl-modem-without-a-computer.207093/
Relevancy 21.07%

I m a tech with years of IT experience PSU. power bad Still or motherboard a won't up Not and I ve built my fair share of computers over the years I have a puzzling one I cannot get to Not a bad motherboard or PSU. Still won't power up the bottom of I m afraid I cannot for the life of me Not a bad motherboard or PSU. Still won't power up get this computer to power on Here is a list of things I ve tried and or eliminated The first thing to happen was quite strange The computer would start when I first got it it was a used system but only after a few presses of the power button I don t ever remember it powering up on the first press of the power button It s an Intel DX BT Extreme Series motherboard with a bit Intel CPU in it GB of RAM FYI the motherboard has a aux power on off switch ON the motherboard itself used for testing at the labs - the manual recommends using the front panel switch however obviously Current state the computer will not turn on at all There are two LED s by the CPU that are for indicating a voltage regulator overheating and the CPU overheating When I hit the power switch the VR Regulator LED blinks quickly once and that is all Ok here goes - Tested PSU came back fine Decided to use that PSU in another system to double check would not boot up in the nd system I replaced the PSU with a good one I know that works of even higher wattage Still doesn t boot up - Tried using onboard power switch same result Tried using the reset switch as a power switch same result so the switches are likely OK I even removed all front panel switch connectors and tried to jumper the two power pins using a flathead screwdriver Still doesn t boot up no power only a solid green light on the mobo when power is plugged in - Reseated all RAM sticks although a system should still POST if a stick is bad as well as CPU same result - Replaced RAM with RAM I know works Same clock speed compatible with this motherboard Again if it s RAM it shouldn t prevent the fans from spinning - Replaced CPU with a good one same socket factor Still no powering up - Removed all other hardware USB cables video card speaker connector drives etc same result - Also replaced the fan with a non-OEM intel fan that has a higher RPM and draws more air - Tried replacing thermal paste on the premise that since the VR reg is showing it s overheating hopefully this would do something - Replaced CMOS battery Same result After testing just about everything I came to the conclusion that it must be a bad motherboard What Yeah a faulty Intel motherboard I ve never heard of such a thing So I RMA ed the board and got the new on in the mail How puzzled was I when the same exact thing happened Words can t describe Solid green light when power cord is plugged in VR light flashes BTW the green light is a V Standby Power Indicator Now in the manaul it states that these lights CPU amp VR LED s will flash when they re indicating a fault not blink once So I tried all the steps again nothing I have replaced every piece of hardware I can think of with good hardware and am still getting the same result - a flashing VR regulator LED Intel has no support for this and the people I ve spoken with at tech support at Intel are stumped My only thought left is a grounding issue which would seem strange to me since the problem gradually got worse that is taking more presses of the power button to power on then eventually no response I am going to switch cases and see if that s the problem If that fails I am out of troubleshooting steps - I ve literally replaced EVERYTHING inside and outside the computer Again to reiterate these are the things that have remained constant in both motherboards original and RMA ed Solid green V Standby Power Indicator Flash of the VR LED when applying power I have replaced every component with the exception of the case and the standouts which I believe have grounding rings on the threads Any ideas nbsp

A:Not a bad motherboard or PSU. Still won't power up

Speaking of shorts, try pulling the motherboard out of the case. Place it on a non-static, non-conducting surface and leaving in the CPU, heatsink/fan, only hook up the PSU, RAM and graphics card, see if will post.
 

http://www.techspot.com/community/topics/not-a-bad-motherboard-or-psu-still-wont-power-up.151315/
Relevancy 29.67%

Hello everyone - I have just assembled a new build It will not power up I need a suggestion to figure out if the problem is the case or the motherboard This is a mini-itx build power-up: power New or Build MB? no supply case's The case is New Build no power-up: case's power supply or MB? Linkworld LC - B This case comes with a volt watt external laptop-style power supply that plugs into the rear of the case just like New Build no power-up: case's power supply or MB? a laptop power supply plugs into a laptop - a barrel connector Inside this power connection connects to a power supply component that is not like a regular ATX power supply but is on a printed-circuit board New Build no power-up: case's power supply or MB? mounted on the case This has several capacitors and other stuff From that comes the -pin and -pin power supply lines for the motherboard I assume the -volt power supply for this external power supply unit is right since it came with the case It was watt The processor is an IBM t with TDP of watts Lower-powered CPUs can be put in a small so I assumed the power supply might be under-powered I ordered a -watt volt power supply with the right size barrel - and same polarity pos inside The MB is an ASRock H MV-ITX It is mini-itx form factor Still same problem Everything is connected correctly When I press the power-on button an external CD drive I have plugged-in spins up for a while But no power light comes on in the front of the case there are no POST beeps the fan for the CPU does not spin up No other signs of life So power is getting into the MB - the external CD drive is plugged into a USB socket in the rear panel of the MB After trying a watt and watt power supply I believe the problem cannot be the power supply cord Can it be that I have too little load I don t think so I plugged in another mm fan and an ol-fashion floppy drive just the power connection to add more load - same thing no power-up no POST nothing but the CD drive will spin up when I open-then-close it yet again So here is the help I need what else can I try -assuming the MB and case are fine is it more likely the case power supply is bad or the MB --Thanks nbsp

A:New Build no power-up: case's power supply or MB?

Well, I figured out the problem.
I am planning to re-do the older mini-itx system I have; it has gotten riddled with Trojan software for kids downloading games; it basically has been de-commissioned already.

So, I took the pico-psu power supply from that older computer, and hooked it up to the one I am making. Everything went perfectly.

So, I un-did that, removed the MB from case, disconnected the barrel-power connection from the case, unscrewed and removed the power supply that had been mounted in the case, put the pico-psu power supply back in place (I had to drill the hole for the barrel-connection out to be a little bigger since the pico-psu internal/external connection is threaded and held in place by nut with lock washer), and routed wires to be clear of cpu fan, screwed MB to stand-offs, and closed it all up.

now, everything is great. I like this linkworld case, but the power supply is worthless. I may try to get a few dollars back from the ebay vendor, to make me happy with a case that is less than what I should have gotten, but is working for me; I don't want to wait on returns, etc.
 

http://www.techspot.com/community/topics/new-build-no-power-up-cases-power-supply-or-mb.206259/
Relevancy 15.05%

Hello,
I seem to have quite an annoying problem with my new 256gb razerbalde. Whenever I launch a game I get a black screen the sound still works but no response from the screen, I have to put it to sleep and back on again and it works even though sometimes I need to do it 10 times or so. I have updated to all the newest drivers and tried a secondary display through hdmi it gives me the following error message: failed to initialize renderer. Unknow error creating the renderer. I only tried launching skyrim so far. The error seems to happen sometimes but not often when I will start the laptop and the screen will be the same. It's more of a black/greyish color and you notice that it is on.
Any help will be of great use. If the post already exists I am sorry and would be happy to get the link.
 

http://www.techspot.com/community/topics/razerblade-problems.206284/
Relevancy 15.05%

I'm having trouble staying on line with telstra connection my internet keeps freezing and dropping in and out I have had trouble with my home line phone and have a bullion modem which this isn't the problem, the problem I believe lays with telstra as I've checked with my server and with downloads and updated my PC so what can I do next.
Thanks
June
 

A:Having problems with connection dropping in and out

June Lomas said:





what can I do next.Click to expand...

Call Telestra
 

http://www.techspot.com/community/topics/having-problems-with-connection-dropping-in-and-out.206048/
Relevancy 20.64%

My new build wont power on all I hear is a few high pitch sounds coming from what I think is the psu.
My specs:

SSD 128GB SAMSUNG 850 Pro
1TB HDD (from previous build it was working fine 2 days ago)

2TB HDD(from previous build it was working fine 2 days ago)

GPU = GTX 680 2GB (from previous build it was working fine 2 days ago) MSI GTX 970 GAMING 4G GeForce GTX 970 4GB 256-Bit on it's way in the mail.

Case is pretty old and doesnt have a lid but it was working fine with my pervious buid)

PSU = CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply (from previous build it was working fine 2 days ago)

Heatsink = Scythe Ashura Universal Processor Cooler

CPU = Intel Core i7-4790K Haswell Refresh Quad-Core 4.0GHz

Motherboard = MSI Z97-Gaming 7 Intel Z97 Motherboard

Memory = CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory

Please help me
 

A:New build wont power on

Disconnect everything except the monitor, cpu, ram. In fact, go down to 1 stick of ram. Will it POST now?
 

http://www.techspot.com/community/topics/new-build-wont-power-on.206021/
Relevancy 15.48%

I have been having quite a few issues with the motherboard I have from ASRock. It is the Z87 Extreme4. My issue is the usb 3.0 No matter what I plug in it says this device can perform faster than this blah blah blah. Anyway, that should not be happening as I am plugging in usb 3.0 devices. What is going on? The other problem is that my front ports that are from the mobod header will no longer recognize any of my external 2.5 hdd. 1 on the back also says this so I am limited to just 3 ports on the back that I can plug into with my external hdd and they are very important to what I do. Is anyone familiar with this? Is this only on this board or a common thing among ASRock? I have other computers and the usb 3.0 works just great.
 

A:USB 3.0 Problems

Have u Installed the drivers? I do not know any thing about ASRock but lots of USB3 have to have the drivers.
 

http://www.techspot.com/community/topics/usb-3-0-problems.205957/
Relevancy 15.05%

I have been experiencing some serious FPS problems with my Laptop recently. I Used to run games at somewhere from 60-120 FPS, but now its dropped down to 5-14 FPS. It happened recently. A couple days ago on Saturday Oct 4rth, I was playing Team Fortress 2 on Steam. I shut off my computer to go to sleep for the night and when I turned on my computer the FPS problem started almost immediately after I turned on the PC. Its not just Team Fortress 2 either, Its happening to all of my other games also. I am not sure on what to do and the only though that comes to my mind when I wonder what the problem could be is a virus. (I have virus protection Webroot but I'm not sure if it works to well.) I might have to Factory Reset my computer, but I want to try different solutions before I Factory Reset. Any Ideas?

My Laptop Info: http://gyazo.com/f1acf76e4e8e9febcec1e6e62991b297

/
 

A:FPS Gaming Problems

Back up your important data and do the Factory Reset. Apply all the Windows Updates, and then try your games. Webroot is not an antivirus program. Try installing MSE:
http://windows.microsoft.com/en-us/windows/security-essentials-download
 

http://www.techspot.com/community/topics/fps-gaming-problems.205822/
Relevancy 19.78%

24x7 - Low Power Consumption ? Internet Download Machine

I want to build a System that has LOW POWER Consumption.

Use:

Mostly Downloading Stuffs , Might Host Own Cloud too , Email Clients , IRC Clients , Other Internet Connected Apps

I was thinking of a Kabini System

Athlon 5350 (25 W TDP) & Some AM1 Mother Board

http://products.amd.com/en-us/DesktopAPUDetail.aspx?id=105

Again I was thinking about the Intel G3258 Anniversary edition processor (But it has Much Larger TDP)

It should be A Windows 7 Machine . Not Linux or other what nots !

But I am Here for some Advice. I already told you my requirements.

Advise me - What should I do ?
I only want to buy

Processor + Motherboard + RAM

&

SMPS (PSU) + HDD

I have the rest
 

A:Hardware Suggestions - 24x7 - Low Power Consumption Internet Connected PC

Hmm; Why is power consumption a hi priority issue - - are you running off a solar powered system or portable generator?
 

http://www.techspot.com/community/topics/hardware-suggestions-24x7-low-power-consumption-internet-connected-pc.205627/
Relevancy 20.64%

A good example of why not to buy cheap power supplies.

This power supply was about 6 months old, Used for 2 or 3 days per week, And drew around 450 watts under full load.

Thankfully the rest of my pc components were spared. It was used in my second older pc, I use a corsair TX850 v2 in my main machine.
 

http://www.techspot.com/community/topics/alpine-850w-power-supply.205458/
Relevancy 15.05%

Hi all. Well I am having problems with turning on my Toshiba satellite c50-a-19t laptop. The night before there was a smell coming from the fan so I turned it off. I put it on charge in the morning and when it was fully charged I went to use it. The white light on the front goes on for a sec and then goes straight off and the laptop don't power up. Any ideas guys ???
 

A:Problems with laptop

Sounds as though it may have over heated and something may have shorted out. you will need to have it looked at your local repair shop.
 

http://www.techspot.com/community/topics/problems-with-laptop.204564/
Relevancy 15.05%

Hey.
Everytime I plug in the Ethernet cord to the router. It lights up and doesn't blink. After a couple of seconds, it just goes dark and I'm unable to use the router.

It works from time to time (I always have to unplug and it replug it back constantly) and I tried plugging in the router without the Ethernet plugged in and it looks like it works fine (Lights blinking). I plug in the Ethernet after that and it continues blinking for a few seconds then it darkens.

It's a Linksys router. WRT5462 V1 (Cisco)
 

A:Router problems -_-

Have you tried more than one cable? The cable could have gone bad.
 

http://www.techspot.com/community/topics/router-problems-_.204968/
Relevancy 14.62%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp

http://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Relevancy 20.64%

Sorry I must not have sent the last post correctly I am new to this site So I will try again I was getting ready to upgrade to bigger hard drive or drives Before doing that I needed to take the old hard drives out to obtain some information off the labels I did so and while they where out I cleaned the Mounting slots a little better than using just No drives to SATA Power hard air Having done that I re-installed them both When I turned on the power button the button lit up and the fans were running But No Power to SATA hard drives it No Power to SATA hard drives does not seem that the hard drives are getting any power as I can t hear or feel any thing Plus the computer is not booting No Power to SATA hard drives I don t recall unplugging anything other than the two hard drives But I also notice that I have a short cable bundle with two white plugs with three pins and one empty pin hole on the other end a black connection with with five connector slots with one middle on blank That makes me think that I unplugged the power to the hard drive someplace along the ling As I have a wire bundle that has two SATA power connectors that are plugged in But their are three white female plugs marked P P and P which are not connected to anything in that wire bundle I don t know at this point if the power comes through that bundle from the power source Of if I do not have the power plugged into the lope I hope that somebody can help me figure this out and let me know if I burnt out the hard drives and have to start over with my recover disk reloading windows and going from there nbsp

A:No Power to SATA hard drives

How would I close this post out. Dumb me had the monitor plugged into an unused VGA port. It only took me two and a half days to figure that out. I wanted to let others know to check and see if they have everything plugged in where it should be. Including the VGA or other monitor cables.
 

http://www.techspot.com/community/topics/no-power-to-sata-hard-drives.204843/
Relevancy 42.57%

I got this desktop computer that has a Asrock board in it Model # FM2A75M-DGS and it comes up with the boot screen and I try to get in to boot settings or anything and it wants a password. I have no clue what the password is and I need help to see if it can be reset. I have looked on the internet everywhere and have had no luck. If I pull the battery will that reset it......help me please. Thanx
 

A:Forgot Password On Asrock Motherboard

Removing the motherboard battery and waiting a couple minutes before replacing it should reset it to where you can gain access again. It should help you. If not then reset your jumper to clear the CMOS. You can get the jumper resetting instruction in the motherboard manual.
 

http://www.techspot.com/community/topics/forgot-password-on-asrock-motherboard.204604/
Relevancy 20.64%

I wanted to reset my admin password on my asus ultrabook,
so I took advice from some wanker who told me to remove round battery for 5 min, unplug it from motherboard, plug ac power in without replacing battery yet....... So... THIS WANKER DID!...
Now turning my computer on ive got nothing .... Except a 'battery charging flicker', when releasing power button after holding it a long,long time!!!!! PLEASE HELP ME IM STUMPED, OR SIMPLY THE OWNER OF A PAPER WEIGHT? .... ( I did see a green light briefly when I plugged it in, without the round battery. )
 

A:My Asus Ultrabook won't power up

Sounds like this procedure corrupted the motherboards bios, and you may have a "paperweight" now for good. Did you re-install the "round" Bios button battery?
 

http://www.techspot.com/community/topics/my-asus-ultrabook-wont-power-up.204512/
Relevancy 20.64%

I have a 9 yr old Desktop PC and my power supply is going out. The one I have is a modular style power supply. Is it required that I replace it with another modular power supply or does it matter?
 

A:Buying new Power Supply

No, it doesn't matter which one you use. Use whatever type you wish.
 

http://www.techspot.com/community/topics/buying-new-power-supply.204274/
Relevancy 15.48%

Hey so I wasn t really sure where to post this as I am quite new to the forums but here I go So my first problem is with my laptop s adapter charger not really sure what it s called in english it no longer charges as in the tiny green light no longer turns on when I connect it to problems Two an outlet and yes I Two problems have tried more than just one outlet It s dead From what I ve read on the web I suppose the only way out is buying a new charger Or trying to open the charger box and fixing it Is that possible If so any tips on how to do that - My second problem is releated with the internet modem I have cable internet and after this storm a coupel of days ago it started playing tricks on me even though the cable is plugged into the pc and the modem is working for about a whole minute my pc says that the cable is unplugged and only after that does it recognize it and connect me to the internet Any ideea what s wrong I suppose there s fault in my modem because before when it worked just fine about three green lights turned on right after turning it on but now only two do the dsl and power one I don t know fpr sure but I think the third one used to be ethernet And that s about it If anything s unclear please ask english is my third language so I might have made some mistakes here and there thanks for your time nbsp

A:Two problems

DO NOT open that "charger box." It is dangerous to do so because it can hold a charge of electricity for quite some time. Either buy a new charger from the laptop manufacture or, if you can, purchase a new charger from the likes of Targus. I have a Lenovo laptop and bought the Targas brand as a back-up. It works great and Targus supplies several adapters to work on many different brands.

Secondly, was your modem and router plugged into a surge protector or do you have them plugged directly into the outlet?

Your English is quite good.
 

http://www.techspot.com/community/topics/two-problems.203854/
Relevancy 15.05%

Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
 

A:Dvd burner problems...any suggestions

They are so cheap now it is probably worth everyone's time to just get a new one.

If you really want to troubleshoot it, put it in a different computer or OS.
 

http://www.techspot.com/community/topics/dvd-burner-problems-any-suggestions.204100/
Relevancy 21.07%

I had a completely new experience.

I installed a new R9 280 today.
I have a CORSAIR HX Series HX750 750W 80 PLUS GOLD PSU. ([email protected])
I was running an ATI 6870.

Previously I never heard the PSU. While checking out a game a fan ramped up and I thought it the
R9 280. I thought man that's loud. Through some experimentation I found the R9 280 fan noise was not the problem but the HX 750. I cannot tolerate too much noise from my computer so this PSU has to go.

I know the R9 280 draws more power then the 6870 so the PSU is doing it's job.

My question is: How many watt PSU would I need so it won't ramp up....or are there other considerations I need to focus on as well...besides the +12 rating and wattage.

Thanks for any help
 

A:Power supply has to go. No, I am not asking which one to buy.

Just get the Rosewill Gold 450w, I think it's on sale.
You won't really find any good passive power supplies.
 

http://www.techspot.com/community/topics/power-supply-has-to-go-no-i-am-not-asking-which-one-to-buy.204284/
Relevancy 20.64%

I bought a gaming PC, and I am wondering if my graphics cards and the computer itself are pulling to many watts, Will the lighting inside the box put a demand on the power supply??? I am debating about taking them out, I don't even have the lights on anyways I find them a waste they came with the computer I bought
 

A:Will lights draw too much power?

Josh86 said:





I bought a gaming PC, and I am wondering if my graphics cards and the computer itself are pulling to many watts, Will the lighting inside the box put a demand on the power supply??? I am debating about taking them out, I don't even have the lights on anyways I find them a waste they came with the computer I boughtClick to expand...


Josh*^ - the lights could not possibly be pulling more that 10 watts, at an extreme. Probably they are actually pulling a level that you could not notice before-and-after if you used an actual measurement, such as with the Kill-A-Watt.

Same for fans, and most anything else you plug in or on except video cards.

Everyone: you will spend all kinds of money to have powerful components, and a suitable power supply - so go ahead and get an ACTUAL power draw measurement -

The kill-a-watt is simple to use and read, very simple. it costs $20 or $25.

You can use it on anything you plug into a 120 volt outlet. Vacuum cleaner, hair curler, radio, anything. It tells you exactly how much power is being used. Exactly.

For over a decade, these power calculators have been estimating power needs, and they have been over-estimating by 100% the entire time.
 

http://www.techspot.com/community/topics/will-lights-draw-too-much-power.207856/
Relevancy 20.64%

Greetings I ve moved to another country where electricity is not stable and goes high low or even disconnect power failure many times a day So i brought an old UPS i have discovery and connected it to the outlet and connected the PC and the LCD screen to it Sometimes when the electricity goes high down the UPS seems can t regulate fast enough or when the electricity disconnect the UPS can t change to battery mode fast enough so the PC restarts I though the problem is from the UPS so i bought failure during My despite restarts UPS PC power a new one iXA PRO which also has a built in AVR with wide input range of - Vac wide range of input frequency output short circuit protection overload protection and the transfer time My PC restarts during power failure despite UPS is ms I connected the PC and the LCD screen My PC restarts during power failure despite UPS to the new UPS and connected my modem and an external hard to the old one Surprisingly when the electricity went high low or when it disconnected the modem did not reset but my PC restarted which means that the old UPS is still working and the problem is from the PC itself I use My PC restarts during power failure despite UPS a very god power supply Blue Storm - wat so any idea what the problem could be Note When the electricity goes high low or disconnect the PC doesn t actually restart it just half turned off i mean i can still hear the fans rolling but there is nothing on the screen and i have to turn it off then on Note Sometimes when electricity goes high low or disconnect the PC keeps working normally Thanx in advance nbsp

A:My PC restarts during power failure despite UPS

My guess is your power supply in your PC uses active PFC (Power Factor Control) while your uninterruptible power supply is likely rated for a passive PFC.
 

http://www.techspot.com/community/topics/my-pc-restarts-during-power-failure-despite-ups.159403/
Relevancy 15.05%

Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
 

http://www.techspot.com/community/topics/having-problems-with-my-dvd-burner.204090/
Relevancy 20.64%

My sister's 13" MBP (2011) died a few hours ago. According to what she told me, she was using it, and then, poof, black screen and no power. She doesn't have the cash at the moment to have it properly checked by a tech, so I did a basic troubleshoot in an attempt to narrow things down.

While the internals are a bit dirty, I didn't see any obvious signs of physical damage (it was relevant to check for this). Furthermore, the machine doesn't seem to respond to any power sources. I tried a couple different power cables and, while the little amber light on the magsafe (sp?) tab will come on briefly, the computer with neither power on nor display a charge on the built-in charge indicator. I will also note that the machine failed while disconnected from an outlet source with a full battery indicated.

My initial conclusions are a) the computer fried itself or b) the battery is toast. Any suggestions?
 

A:2011 MBP 13" Won't Power Up

If no one here can offer any insight, I would post this to the Apple discussion forum. There are usually people there that can diagnose this from just a description so that is your best bet.
 

http://www.techspot.com/community/topics/2011-mbp-13-wont-power-up.204013/
Relevancy 20.21%

I turn-on the power on my laptop and all I see is a cycle of Red, Green, Blue, White, & Black of color on my screen. Computer was working the night before. I do not know much about troubleshooting a computer. Can anyone please give me an advice or guide if this is something I would be able to tinker to work or bring the laptop over for service.
I have a Dell XPS1730 (5 years old) with Nvidia IUPGA5D G84. Recently, upgraded to Windows 7
I appreciate your assistance.

Thanks.
Daire
 

A:Laptop screen flashes RGBWB color upon power-up

The internal video has died. To verify this you can attach an external monitor and see if the display is normal
 

http://www.techspot.com/community/topics/laptop-screen-flashes-rgbwb-color-upon-power-up.203382/
Relevancy 20.64%

So I've got a mostly custom built pc, its motherboard has everything built in(Graphics.etc) but im looking to upgrade to this for graphics:
http://www.amazon.co.uk/HIS-iPower-DLDVI-I-Graphics-H280XQMT3G2M/dp/B00FNHVUTA#productDetails
I have two questions:
1. I have a 500w psu currently, will I have to upgrade, and by how much.
2.how will I take of the built in graphics on the motherboard.

And also, are there any reccomendations for a better psu
 

A:Power Supply Vs Graphics Card

Product Description
Technology:GDDR5 SDRAM, Size:3 GB, Bus Width:384-bit, Effective Clock Speed:6.4 GHz, Width:4.2 cm, Depth:31.1 cm, Package Type:Retail, Height:15 cm, Cables Included:1 x DVI-VGA adapter, Peripheral / Interface Devices:Two 8-pin power connectors, Required Power Supply:750 WClick to expand...

your link clearly states that a 750w PSU is required.

you can use any of these online power supply calculators:
newegg(store) calculator(power supply requirement)
outervision calculator
 

http://www.techspot.com/community/topics/power-supply-vs-graphics-card.203398/
Relevancy 20.64%

When I power on my Toshiba equium a200-151, the screen lights up but no display at all - even though there is loading activity. I rigged up to my PC monitor and everything is fine - see bios and windows loading etc. Borrowed a spare compatible working screen but same problem. I'm not 100% sure if its the inverter or the ribbon connector - any ideas before I buy a new inverter? Thanks for looking.
 

A:Lcd lights at power on but no display

I would say that the video cable (ribbon cable) is bad based on what you have tried so far. This cable goes from the motherboard to the LCD display. Did you use the old inverter off the suspect Toshiba when you tried the compatible spare LCD panel?
 

http://www.techspot.com/community/topics/lcd-lights-at-power-on-but-no-display.203111/
Relevancy 20.64%

Hi all. I just bought a graphics card that needs 350 watts and +12v with 20 amps to run. My power supply has to following output:

+5V 22A MAx -12V 1A max
+5V (FP) 2A Max +3.3V 17A max
+12VA 18A max +12VB 18A max

combined power on +12VA and +12VB rails must not exceed 360 watts

Total combined power must not exceed 375 watts

Can it run the card?
Thanks all.
 

A:Can my power supply run my new video card?

Hi, could you please post a little more detail.
Instead of saying graphics card, it would help if you said the actual graphics card.
Instead of power supply, you could say what power supply you have.
 

http://www.techspot.com/community/topics/can-my-power-supply-run-my-new-video-card.202504/
Relevancy 20.64%

Hi there. Since I bought my new mouse and illuminated keyboard, when I use the PC a lot, they have spontaneously been stoping for a period of time and then they work fine. I didn't have this problem before because I had a ps2 keyboard. Now I have USB mouse and keyboard and this happens. I do believe there is a problem with the power management. A friend of mine has the same motherboard and he incurs the same problem. I have a Gigabyte GA-B75M-D3V and here is a printscreen of my bios with the power management tab.
What settings should I change?
 

A:Bios power management

Hi,

I think you'd be able to adjust that power management settings in Windows under

Control Panel>Power Options>Edit Plan Settings>Change Advanced Power Settings>USB Settings
Or in Device Manager>USB Root Hub Properties>Power Management Tab

 

http://www.techspot.com/community/topics/bios-power-management.202067/
Relevancy 20.64%

Is my motherboard compatible with and does it have enough power watts it compatible my Card have power new to & enough with run Is mob Video to run new video card My specs More details about my computer Component Details Processor Intel R Core TM i CPU GHz Memory RAM GB Graphics Intel R HD Graphics Gaming graphics MB Total available graphics memory Primary hard disk GB Free GB Total Windows Home Premium System Manufacturer Gigabyte Technology Co Ltd Model H M-UD H Total amount of system memory GB RAM System type -bit operating system Number Is my mob compatible with new Video Card & have enough power to run it of processor cores Storage Total size of hard disk s GB Disk partition C GB Free GB Total Media drive D CD DVD Graphics Display adapter type NVIDIA GeForce LE Total available graphics memory MB Dedicated graphics memory MB Dedicated system memory MB Shared system memory MB Display adapter driver version Secondary monitor resolution x Primary monitor resolution x DirectX version DirectX Video Card Information Network Realtek RTL D D Family PCI-E Gigabit Ethernet NIC NDIS New Video card info Nvidia G-Force Video Px Video card UPC- Mb PCIExpress X Dual Monitor Support My power supply is watts and on my motherboard now there is only sticks of GB ram Patriot Viper Extreme and nothing else in any of the expansion slots I looked online but cannot get a straight answer Can my motherboard run this card with no issues Thanks I am shine nbsp

A:Is my mob compatible with new Video Card & have enough power to run it

No one can say if it will run with no issues, just because there could be any number of complications that could pop up. If you asking will it work with your current system, then yes it will run on your current system with the PSU. I would advise that you uninstall the video drivers (and software) for the current card, changing out to the new card. This will create less of a head ache for you in the end.
I would also suggest trying to find another 2GB ram stick because your motherboard is a Dual Channel motherboard and the computer will run better if you have 4 sticks of ram instead of 3. Its not going to hurt your computer by having 3 sticks of ram versus 4, but you will get better overall performance.
 

http://www.techspot.com/community/topics/is-my-mob-compatible-with-new-video-card-have-enough-power-to-run-it.202004/
Relevancy 14.62%

I have a toshiba satellite pro and usually use the touchpad with my right hand rather than a mouse. I attached an external mouse for my daughter to use, and changed the settings to lefthanded. I disconnected and shut down. Since then, each time I restart the computer, the touchpad does not work correctly. Instead of double clicking on the touchpad, I have to rightclick. I have to go into mouse settings on control panel, and move the double click speed, click apply and then the touchpad works correctly then. Why is this? Please help.
 

http://www.techspot.com/community/topics/touchpad-problems-after-using-left-handed-mouse.201828/
Relevancy 15.05%

Hi So my HTC just old Nokia Problems 7360 spare with got stolen so I had to dig up my old spare phone it s a old Nokia and it works somehow I can call and I can txt but I can t save any new contacts it just says something like quot forbidden action quot anyhow I can t copy old contacts from the Problems with old spare Nokia 7360 phone to the sim card I can t delete old contacts so I was going to reset the whole thing but I have changed the security code by default it should be and I can t remember what I have changed it to and yes I have tried all the possibilities that there are So what to do -any ideas P S It also says that the memory is full and it can t save any MMS WAP what nat settings EDIT Have got it connected to the computer now with a data cable and using Nokia PC Suite and I made a backup of everything just in case but Problems with old spare Nokia 7360 it failed to backup the contacts so I tried to just open and view all the saved contacts but it just fails Anyhow I m not really interested in the old contacts so I don t mind but when it fails to read the contacts it also fails when I try to add new contacts via the computer Next step was to download Nokia Software Updater that s also what the PC Suite suggested but it can t quot find quot the phone when it s connected So what next -I could send it to Nokia so that they there would flash it but then if there is some other problems with it it would cost a fortune and it s not worth it nbsp

A:Problems with old spare Nokia 7360

You need to go in the nearest nokia care point at your place. You can also go to unauthorised repair shop for reformatting or reflashing.
 

http://www.techspot.com/community/topics/problems-with-old-spare-nokia-7360.171731/
Relevancy 15.05%

Hello, yesterday I was using my computer and I shut it off. When I came back a few hours later, the wifi couldn't connect, and, unlike most times life this, it displayed an ethernet symbol with a red 'x' opposed to the normal wireless symbol with an 'x'. My computer stopped connecting to any wireless, though works fine with ethernet.

It is a Lenovo Ideapad with Windows 8

I've tried rebooting (I'm clueless, but not that clueless), updating the OS, uninstalling and reinstalling the computer's drivers along with some more far-fetched stuff (I got desperate) such as removing the battery, waiting a few hours, and plugging it back in, but nothing has worked.

If anyone can help, that would be amazing, thanks!
 

A:Internet problems on my Lenovo

trekzone said:





Hi,

Seems your WIFI adapter is being disabled. try enabling the device in your device manager or with the Fn+function key provided in your laptop.Click to expand...

That doesn't seem to be the problem, the adapter is enabled and the computer is not in airplane mode
 

http://www.techspot.com/community/topics/internet-problems-on-my-lenovo.201378/
Relevancy 20.21%

I have put together a new build with the Gigabyte Assassin 2 m/board and a Corsair AX 860i PSU. On start up the PSU clicks out and won't run. The PSU Self test is good - green light and the fan is running, however when I connect all the peripherals the PSU just drops out and will not run. I have double checked all connections from the CPU, M/board, memory, graphics cards. This is all in a Thermaltake Level 10 case, my next check will be the hard drive connections - hot swap bays. Any help will be really appreciated.
 

http://www.techspot.com/community/topics/gigabyte-g1assassin-2-motherboard-corsair-ax-860i-wont-power-up.201388/
Relevancy 15.48%

I recently bought a new Motherboard for my PC, it is a GIGABYTE GA-F2A88XM-D3H, it has a USB 3.0 plug in. However even though I plugged my USB 3.0 plug into it I still have no use. These are my front USB 3.0s, although the sound and mic work fine in the front. I currently am using a Windows 8 64-bit computer and have all drivers up to date, I am wondering if there is a way to turn it on in the BIOS.
 

A:USB 3.0 Problems

It seems to me like you are plugging the USB 3.0 device into the front of your case. If they are not working, it means you probably never connected the USB 3.0 header plug from the motherboard into the case plugs.

This is what I am talking about BTW:


Just to clarify though, you are trying to connect your device using the front case USB plugs? Also, if you plug the USB 3.0 device into the motherboard directly (in the back of the case), does the device work?
 

http://www.techspot.com/community/topics/usb-3-0-problems.201213/
Relevancy 20.21%

Hey guys I had some contractors doing some work on my house today and they needed to shut the circuit off to the room my computer was in The computer was on at the time so it shut off when the power was cut Now it won t go back on Power button does nothing at all and I don t know if it s the power supply mobo or switch I ve got a power supply tester which causes my computers fans to start up when it s plugged in so the power supply does respond not Power mobo button working... issue? The results are in the attached file It shows LL which means to low to register voltage for the - V line I honestly don t know if I even have that line so I don t know if that s bad I attached the label on my power supply too Would Power button not working... mobo issue? no voltage cause a computer to completely not respond Because the fans DO start up when the power supply tester is plugged in I don t think the switch is the problem because I tried to short the power switch jumpers with a paper clip and nothing happened I also took the CMOS battery out for a while and then tried it again and that didn t work Any ideas on whether I need a mobo or a power supply I don t have an extra PSU around to test with but I may try to find one before ordering a new mobo thanks in advance -mike nbsp

A:Power button not working... mobo issue?

Not the switch. Could be the motherboard or PSU, but I don't have any good insight.

I would unplug the PSU and flip the 120/240V switch to 240V, then flip it back before plugging it in. To me, this doesn't make any logical sense, but over about 16 years of playing with PCs I have seen it work twice.
 

http://www.techspot.com/community/topics/power-button-not-working-mobo-issue.201009/
Relevancy 19.78%

My brother in law has a got himself a free computer to which I am going to donate my old Sapphire X1950GT graphics card. The problem is, is that I can't easily wire it in to the computer as it has a crappy generic PSU with only one Molex and several Sata power plugs.
What I do have, without slicing and dicing and getting out the soldering iron, is the adaptor cable below. What I don't know is whether this has a sufficient amount of wires I.e. 0V and 12V to provide power to my G/Card.
Any ideas?

Tom.


 

A:Wiring a graphics card to a generic PSU - sufficient power wires on plug?

System power consumption with a Sapphire X1950 GT is less than 250W. I think you will be fine with the splitter mentioned above. You probably don't need much extra power to run the card. I assume there is at least a 300W PSU or greater in the system.
 

http://www.techspot.com/community/topics/wiring-a-graphics-card-to-a-generic-psu-sufficient-power-wires-on-plug.200411/
Relevancy 15.48%

I recently bought GLADIATOR R7 260X Intel i5-4570 3.6GHz Quad Core Next Day Gaming Pc - Aria PC from Aria,it comes with CORSAIR CX series CX430 430W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply - Newegg.com and every so often the monitor goes off which I think may be due to a lack of enough power. Would it be beneficial to change to a Antec TPQ-850 850W Continuous Power ATX12V / EPS12V 80 PLUS BRONZE Certified Modular Active PFC Power Supply - Newegg.com that I have spare?

Thanks
 

A:Possible PSU problems

If you have the PSU as a spare, there is no harm in using it to see if it corrects your problem.
 

http://www.techspot.com/community/topics/possible-psu-problems.200393/
Relevancy 15.05%

I have a laptop with the Realtek high definition audio and Dolby home theater installed. After the latest win8.1 update the Realtek program has stopped forwarding the sound through the Dolby program (which it managed to do perfectly before the upgrade). I tried using Viper4Windows too but that didn't work eighter. Is there an option anywhere that will allow me to fix this?
 

A:Realtek and third party program problems

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/realtek-and-third-party-program-problems.200237/
Relevancy 15.05%

After upgrading my MacBook Pro with Maverick, Audio Hijack Pro pretends not finding the source application for recording. Anyone the same problem?
 

http://www.techspot.com/community/topics/audio-hijack-problems.199984/
Relevancy 15.05%

Are you having a problem with your Internet connection or Wi-Fi? Whatever the problem ? from a flaky connection to Wi-Fi troubles or even no access to the Internet at all ? some router troubleshooting could fix things.

Some of this also applies to your modem, although many Internet service providers are handing out combined router-modem units these days. Your wireless router and modem may actually be the same device.

Reboot the Router Read more
 

http://www.techspot.com/community/topics/how-to-troubleshoot-wireless-router-problems.199886/
Relevancy 15.05%

I have the router of my isp and to have an extended range of the wifi we bought a new router which has a bigger range of its wifi now my brother is connected to this router and the other router is connected into mine which means it is taking the bandwidth of my router now the problem that im having is that when my brother seems to be uploading a photo or School stuff onto the internet my internet keeps disconnecting and lagging which probably means that his uploading is literately draining all mine up and im left with nothing isnt there a way to fix this or to cap the upload speed/download
 

A:Internet problems

QoS settings on the main router.
 

http://www.techspot.com/community/topics/internet-problems.199848/
Relevancy 15.05%

Hey, today i just got a new 4gb memory stick to add to my computer, currently i have 2 2GB DDR3 1333 RAM sticks.(These were both Kingston Memory Sticks) I then added a 4gb DDR3 1333 Ram stick (Crosshair) to the motherboard and made sure they were firmly placed in and it was all fine, I then turn on the computer and find that the motherboard starts beeping once then two beeps after and the Screen is blank, and my mouse & keyboard aren't responding. My current OS is Windows 7 64 Bit, so i shouldn't have a problem installing new ram to my system...
I'm not sure if this is a problem with 2 different brands of sticks or what.. but the fans are running for my Graphics card (I don't have onboard graphics available)

Specs
AMD 1055t X6
ASUS M5A99XEVO Motherboard
ATI Radeon 5570
Kingston

Any help anyone? Thanks
-Joe
 

A:Problems with RAM installation

The motherboard does not like that 4GB module. Have you tried the 4GB by itself? If the 4GB module won't run the computer you'll have to stick with 2GB modules. How many memory slots are on the motherboard? ASUS motherboards are notorious for being very picky about memory
 

http://www.techspot.com/community/topics/problems-with-ram-installation.179890/
Relevancy 20.64%

Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.
 

A:No power after motherboard install

Ratchetz said:





Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.Click to expand...

By any chance could you post a picture of your computer as it is hooked up right now so we can see if your missing anything. Try to check if the 4pin/8pin connector on the motherboard is hooked up and check for tightness of all the Motherboard connectors to start with.
 

http://www.techspot.com/community/topics/no-power-after-motherboard-install.199528/
Relevancy 15.05%

OK where to begin Alright I got this new tower that is a decent custom rig I have been having problems with my HDD tb movies music etc and SSD gb OS Games basic running files randomly dropping out The HDD always goes sata Possible problems first I know it happens because I get a pop up from Utorrent saying the file save directory cant be found or there is an error with it I download movies ebooks etc Thats usually the first clue My Asus quick storage will pop up saying a drive has been disconnected then straight away it is found but it is unknown I can see the files in the HDD through my Computer but cant actually Possible sata problems access them I cant resolve this without a restart Now chance of after the restart wether the SSD goes aswell thus my OS A powerdown for a little while usually fixes this Longest wait time mins for a system go Then its all fine and dandy like nothing happened I have checked Possible sata problems connections and cooling psu and Possible sata problems its new so its clean no dust I power down the system most nights out unless I really wanna d l something for the next day It has stock OS with Minecraft Dayz Halflife and Portal installed and I have DLed about tb of previous torrents that I have already dled from trusted supplies with avast installed the expensive one not the free version Apart from that stock Anything else I can tell you to try to help me troubleshoot this please just ask System specs Case Corsair D Full Tower Cooling Corsair Hydro Series H i Liquid Cooler for CPU CPU Intel Core i - K GHz Quad Core LGA Motherboard Asus Z -Plus ATX Memory RAM Corsair GB Vengeance Pro Mhz Video Card x Nvidia Geforce GTX ti Hard Drive Samsung Series Pro GB Hard Drive Seagate Barracuda TB rpm CD-drive LG Blu-ray rewriter combo Power Supply Corsair HX Modular Watt Plus Gold Operating System Windows Professional edition bit And not on here a couple of additional fans Thanks in advance for any help nbsp

A:Possible sata problems

Hey Zac. Since it comes back after a power down and brief rest, to me it sounds like a heat buildup problem, maybe even with the CPU. Has the builder checked it out?
 

http://www.techspot.com/community/topics/possible-sata-problems.199642/
Relevancy 21.07%

Hi im planning to maximuize my fans in my case Phantom But im not sure if My power Supply could Handle it Right now It Running on Phanton Case top MM fans rear mm fans and front mm fans Raidmax RX- K W ATX Power Supply ASRock GM-VGS FX AM w Radeon AMD FX- GHz Quad-Core Processor AMD Stock AM AM w Case Fan GB Supply Power x GB DDR MHz GB SATA Hard Drive DVDROM DVD Reader Power Supply Drive External USB Wireless N Adapter SAPPHIRE R GB DDR WITH BOOST Required watt My system is running fine now even if I put the fans controler into max speed but now im planning to maximize my fans in my case here is the fans status for my case Side x x mm included rpm Front x x mm included rpm Top x x mm included rpm Rear x x mm included rpm Bottom x mm HDD Pivot x mm Question Can my PSU handle everything for my system im also planning to upgrade my ram to gb or What is the Power Supply recommended for my system Or when im planning to upgrade my motherboard what would fit well with my system looking for slot ram or if my watt power supply strong enough to power thermaltake dual frio heatsink Thx you very much for trying to help nbsp

http://www.techspot.com/community/topics/power-supply.199652/
Relevancy 19.78%

Hello all I made a post regarding the performance failing of one of my supply power affect hard performance? drive/computer Faulty hard drives The conclusion we came to has unfortunately not resolved my problem and I am beginning to think my Power Supply may be the culprit Faulty power supply affect hard drive/computer performance? ------------------------------------------------------------------------------------------------------ Before I go into details here is my current Hardware Q GHZ GIGABYTE EP -DS R GB PC mhz x gb x gb Nvidia GTX mb requires x pin power adapters Asus Xonar soundcard requires floppy power adapters Windows x Jeantech W PSU modular PSU PCI-E nodes and nodes for other devices gb HDD operating system tb HDD data tb HDD data tb HDD data - added recently ------------------------------------------------------------------------------------------------------ My original problem in brief Upon accessing certain files in one of my TB drives I hear a distictive quot click lockup halt quot sound and then the entire system crashes first the drive will become inaccessible then windows explorer will crash followed by the mouse and eventually a BSOD after a minute ------------------------------------------------------------------------------------------------------ I bought a new TB a month ago to replace what then I thought was a failing TB drive Since the problems have become quot random quot and happen across all four drives tb tb gb tb I am now considering my PSU the culprit Jeantech Absolute w It seems logical to me Sometimes while performing tasks which put stress on several HDD s at the same time my computer is quot choking quot running as fast smooth as it should but with sudden freezes with those HDD quot click - stop - restart quot sounds Booting into windows is failing from time to time freezes on the quot starting windows quot screen or DISK BOOT FAILURE Insert system disk The PSU is modular - could certain quot plugs quot in my PSU are faulty I haven t tested this extensively but in some cases when the computer is not starting up at all using different power ribbon cable combinations seems to help Also I had to remove my DVD drive completely when I first installed the new TB I bought and I don t think my computer will start at all with it plugged in anymore so my PSU MUST be having a hard time coping with all the components If it is of any relevance I use an Nvidia GTX which requires x PCI-E pin power connections hard drives power is supplied via THREE modular ribbon power cables - two HDD s share power from the same ribbon cable lastly worth noting I use an asus Xonar sound card requires floppy power connector several symptoms suggest the PSU any thoughts nbsp

A:Faulty power supply affect hard drive/computer performance?

a 1000Watt shouldn't have any problem coping with the components that you have, i would recommend that u borrow a power supply from a friend and try it out on your computer, maybe the power supply is old and is not supplying proper voltages on all the rails....
 

http://www.techspot.com/community/topics/faulty-power-supply-affect-hard-drive-computer-performance.160966/
Relevancy 21.07%

Hi can anyone help please, I just received my new Plait GTX Nvidia 770 Jetstream card and noticed it came with an 8pin and 6pin power requirement. They provided a 6pin to 8 pin adapter and I have a Corsair 650 TX PSU with 2 6pin power lines problem is the 6 to 8 pin adapter looks like it need both 6pin lines from the PSU to provide the necessary voltage/amps and that still seems to leave me short the other 6 pin port on the GFX card. Do I need to plug both 6 pin attachments in to the adapter or will one suffice?
 

A:GTX 770 Power Requirments

My bad, silly fool that I am I failed to realize both 6pin PSU power lines also have additionally the other 2pin lines required to make up the 8pin connection right along side. Thought I may need a newer PSU there! LoL
 

http://www.techspot.com/community/topics/gtx-770-power-requirments.199159/
Relevancy 20.21%

Hi,
I gave my external hard drive to a friend but his laptop didn't recognize it. after getting it back, I connected it to my laptop but it didn't show up in disk management at all. the drive is receiving power since the light is on. I felt the drive upon connecting to laptop and noticed it tries multiple times to rotate the magnetic disk but in the end it come to a stop and nothing after that. I think my friend's laptop somehow damaged my drive since I'm sure it's a hardware problem.
So, I was wondering maybe any of you guys have an idea how to fix it if possible otherwise, I'd like to know if I can recover the data without spending for the experts?
Thanks
 

A:WD external drive receiving power but not working

Hey armmzd. Sure sounds like a drive gone bad, and assuming you know it was good when you gave it to him,maybe it was dropped,etc. All I can suggest is going to the drive manufacturer's site and see if they have a drive diagnostic tool you can try.
 

http://www.techspot.com/community/topics/wd-external-drive-receiving-power-but-not-working.198974/
Relevancy 15.05%

Last night all of my wireless devices (kids computers, laptop, IPad, and Wii) suddenly stopped working. The only thing I can seem to come up with is to unplug the router and let sit for a few minutes to see if that corrects the problem. It has not.

What else do I need to do to get my wireless connection back up and running?
 

A:Wireless problems

That was a good try. what was going on for all your devices just before you lost connection?
 

http://www.techspot.com/community/topics/wireless-problems.198430/
Relevancy 20.64%

Hi guys I ve spent today building a pc for myself However on pressing the on button there s no reaction at all My machine specs are M B - Gigabyte GA- A-UD Processor - AMD RAM - Corsair Gb DDR Case - Zalman Z Graphics card - Gigabyte HD PSU - Corsair CX M W Wi-fi card also installed but can t remember the name and seem to have temporarily lost the box in a pile of packaging So far I ve checked the CPU and motherboard power sockets the wall plug sockets and the power cord to my PSU I ve also checked the connections between my case and the motherboard and these all appear to be correct on power build PC doesn't As part of this final point I switched the power on LED with the power button they both originate from the same location so thought they may be mixed up Anyhows I got a solid LED which suggests to me that a there s power running through the switch circuit and b the pc isn t booting when told to as a PC build doesn't power on solid LED would indicate PC build doesn't power on circuit completion which would be the equivalent of holding in the on button If anybody could shed any light on where to go next I d be eternally grateful currently searching the house for a paperclip to test the PSU nbsp

A:PC build doesn't power on

Does the CPU and case fans move at all, when pressing the power button?
 

http://www.techspot.com/community/topics/pc-build-doesnt-power-on.198098/
Relevancy 14.62%

Hi I have the same problem message quot An Operation was attempted on something that is not a socket quot etc appeared Also my Node Type is unknown I tried all steps mentioned above and I never made it to have Node Type hybrid It appears to be unknown even after adding node type and value And about this quot You should see a complete set of TCP values and using IP problems connection Limited with release/renew the command Prompt ping nslookup quot I got something completely different it says for nslookup that default server is not available server unknown cant find server for address etc Any idea how can I try to fix Limited connection with IP release/renew problems problem It all started with Limited connection with IP release/renew problems IP address conflict Once it was solved thanx to this cmd netsh int ip reset resetlog txt netsh winsock Limited connection with IP release/renew problems reset catalog But it does not work any more It shows that local area network is connected and there is still message about IP address conflict Many thanks in advance Moderator note Moved from this thread http www techspot com community topics limited-connection-with-ip-release-renew-problems nbsp

A:Limited connection with IP release/renew problems

It's a little difficult to pin down what your problem is without knowledge of your network and router setup, but IP collisions and connection issues that get fixed temporarily with release and renew are usually related to misconfigured DHCP settings. Such as when two routers are distributing IP addresses to the same range of systems, or when some devices list static IP address, or sometimes if a wireless device is also plugged in with a network cable, claiming the same IP address with both connections.

if you ping those google dns addresses (8.8.8.8, or 8.8.6.6) and you get errors instead of replies it just means your not connecting to the internet.

Like I said though this is generic stuff and no one will be able to be more specific until you describe a bit about your overall network layout, and types of connections.
 

http://www.techspot.com/community/topics/limited-connection-with-ip-release-renew-problems.197582/
Relevancy 20.21%

Hi

I have a printer
There is no lighting up
The power supply give
red wire about 7 V
blue wire about 11 V

Holding down the power button en stop/reset won't work

How can I test the logic board is defect?

Image logig board






Cheers
Harrie
 

http://www.techspot.com/community/topics/canon-printer-pixma-mp610-no-power-no-display.197978/
Relevancy 15.05%

I have been having problems connecting my laptop to the internet over my home's wifi network. Other wireless devices still connect no problem, but since Thursday I can't connect with my laptop. I have tried numerous solutions culled from google, but nothing has worked. My most recent attempt was from this forum so I decided to try here first for a solution specifically for my situation. I have an Asus i5 Windows 7 computer with a netgear wireless router. My laptop says it connects to the network (wireless router shows this connection), but it shows no internet connection. I have used my cell phone as a wireless hotspot and the laptop is able to connect to the internet that way. I used a LAN connection to assure myself that the laptop could connect to the internet and it did just fine. I am at a loss and frustrated beyond belief. Any help would be greatly appreciated.
Mark
 

A:Problems connecting to internet on laptop

Did you get this issue solved?
 

http://www.techspot.com/community/topics/problems-connecting-to-internet-on-laptop.196946/
Relevancy 15.05%

Hi guys ive got a tricky one here, Ive recently run a cat6 straight through cable to a separate dwelling from the main house to my EVG2000 Router modem. the Cat6 cable is connected to the main house at another EVG2000 router modem. The problem I am facing is My laptop(s) and computers can connect wirelessly with internet access fine but my galaxy S4 phones, iphone, ipads and xbox's connect to the new router in separate dwelling but have no internet access how ever they work perfectly through the main house's router fine. I've tried power cycling both modems, tried different ports. I have not tried to forward any ports as of yet as I have little experience in doing so. Hope you guys can help cheers
 

A:Netgear EVG2000 Router problems

Hey firz3h. I think I follow you, correct me if I'm wrong. Your internet connection comes into the main house and goes to the EVG2000 wireless modem/router combo. You ran a line from this unit to the separate dwelling and it connects to a second EVG2000 unit, is that so?
Do you need both wired and wireless capability at the separate dwelling or just wireless capability?
If both are needed, a wireless router should be able to have it's DHCP function turned off so that it acts as a switch which will enable you to connect 3 devices by Ethernet. On the fourth LAN jack, I would connect a WAP (Wireless Access Point) which should give you a wireless signal . It might be easier to just get a 4 port switch instead of trying to disable the DHCP function of the second router. DHCP assigns IP addresses to the devices that try to connect, and using 2 on the network will cause issues. I think this would work, correct me if I'm wrong folks.
 

http://www.techspot.com/community/topics/netgear-evg2000-router-problems.197595/
Relevancy 20.21%

Its my first turned power Supply Flashback when LED is flashing on build and I think my motherboard isnt working but more specifically I want to know why the flashback led is flashing when I turn on the power supply Power is going into the motherboard the standby light comes on as well as the Flashback LED but when I attempt to turn the computer on with the power button Flashback LED is flashing when power Supply turned on on the case nothing happens I ensured both the ATX power connectors were fully in everything is connected RAM is in but the computer will not boot Also I might have have connected the power to the case in at the opposite ends ground to power and power to ground but it has been reversed and if that is the problem would I have to replace the case or the motherboard Here are the specs -ASUS M A motherboard -Fractal R ATX Tower Case -AMD FX- core AM GHz -Kingston GB in SSD -Corsair TX -Kingston gb HyperX DDR Ram nbsp

A:Flashback LED is flashing when power Supply turned on

No idea but slight suggestion Power supply???
Ronan
 

http://www.techspot.com/community/topics/flashback-led-is-flashing-when-power-supply-turned-on.194872/
Relevancy 15.05%

Hi,
Has anyone this problem or know how to fix it. When switch on my computer the mouse & keyboard do not work. If I then remove all the USB cables it will then work ok, after a few reboots. I am running Windows 8 64 bit. Would appreciate any advice.

thanks,
Verity25
 

http://www.techspot.com/community/topics/usb-mouse-keyboard-problems.196779/
Relevancy 21.07%

I got this laptop, neo, 1 1/2 year in my possession, it so happened that I accidentally hybernate I for a couple of hours, when I tried to open it, the there is no booting taking place., no fan,just the led light for charging/power , I have tried the hard reset as suggested in other forum, but the charging light just blinking as I press the power button( connected with the adaptor and w/o the the battery)
is there any one know my case?
 

A:Laptop won't power on

Remove the battery altogether; then hit the POWER key, which will drain any power left onboard.

Now reinstall the battery and connect to the A/C charger - - does it show as charging?

Wait a few minutes and then hit power on again - - it should resume from hibernation.
 

http://www.techspot.com/community/topics/laptop-wont-power-on.196040/