Windows Support Forum

Unable to open the lumia camera & lumia selfie

Q: Unable to open the lumia camera & lumia selfie

We do all the process such resets the phone. Uninstall & install the app again ,too many activities done which is provided at your site .
But still problem not resolved ( lumia 535)

http://forums.windowscentral.com/ask-question/442796-unable-open-lumia-camera-lumia-selfie.html
Relevancy 100%
Preferred Solution: Unable to open the lumia camera & lumia selfie

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 19.35%

After months of build-up, AMD has finally unveiled its true next generation graphics card. The Radeon R9 Fury X broke cover at E3 last week and the review embargo lifted just days ago. While it's not the Titan killer some...

Read more
 

A:Weekend Open Forum: AMD or Nvidia?

And it starts!
Started with amd 7970
Then went nvidia 770sli now 980ti.
I just really like the physx and 3d nvision
 

http://www.techspot.com/community/topics/weekend-open-forum-amd-or-nvidia.215859/
Relevancy 19.35%

Hi all,
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
 

A:Unable to install Nvidia driver and also to play games on Windows 8.1

I'd recommend to do the following:

Perform a clean install of Windows

Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.

Let me know how it goes after you've tried what I've mentioned.
 

http://www.techspot.com/community/topics/unable-to-install-nvidia-driver-and-also-to-play-games-on-windows-8-1.213781/
Relevancy 19.78%

So about a few weeks ago (not exactly sure when it started) my computer stopped allowing me to access certain websites. It started out with only a few, but now it is almost 50-80% not connecting. I do not think it is a problem with my browser. I typically use Firefox, but IE will connect to the same ones Firefox allows, and will also not connect to the same websites Firefox will not allow.

I have searched these forums for a couple of hours now and nothing seems to fit my exact problem, and I am hesitant to use the solutions from other forums because it might further hurt my system. I am not tech-savvy/computer literate to say the least, and I would need a thorough walk-through on how to diagnose the problem, as well as how to fix it.

Any help would be greatly appreciated.
Thanks
 

A:Unable to connect to most websites -- not a browser problem

How are you not allowed to view the website? Does the page show "The page cannot be displayed"? or you are not authorized or something else?

Try running cmd.exe, type "ipconfig /flushdns" without quotes.
 

http://www.techspot.com/community/topics/unable-to-connect-to-most-websites-not-a-browser-problem.177710/
Relevancy 27.52%

Hi
I have an asus x555ld-x0549h, it has a built in camera that does not work. I have been searching for a driver all day and didnt find a thing...
then I tought that the camera was being blocked and I enabled it and... still noting...
can anyone help me please?
I'm using windows 8 and the camera app says that I need to plug in a camera... so.... wtf?! :S
 

A:Asus x555ld built in camera not working

How old is this laptop?
 

http://www.techspot.com/community/topics/asus-x555ld-built-in-camera-not-working.212530/
Relevancy 18.92%

Anyone that spends a considerable amount of time in front of a monitor can attest that finding the right mouse is a must. While there are plenty of boxes to tick when searching for a suitable pointer, for me, it...

Read more
 

A:Weekend Open Forum: What kind of mouse do you use?

Roccat Kone XTD (laser). It's the best mouse I've had so far. My Death Adder has been demoted to closet duty.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-kind-of-mouse-do-you-use.212356/
Relevancy 17.2%

Hello friends
i am unable to get sound from the external speakers , when the speaker jack is connected to the cpu i hear sound from the internal speakers, how do i get my external speakers working

regards
Shiv
 

A:Unable to hear from the hear external speakers

shiv said:





Hello friends
i am unable to get sound from the external speakers , when the speaker jack is connected to the cpu i hear sound from the internal speakers, how do i get my external speakers working

regards
ShivClick to expand...

How about some more info about your system man?

http://www.techspot.com/vb/topic33297.html
 

http://www.techspot.com/community/topics/unable-to-hear-from-the-hear-external-speakers.174073/
Relevancy 19.78%

A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.

However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.

What can I do to fix this issue?

For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 6.30.95.14, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 2.1.0.7.
 

A:Unable to connect to WiFi after failed Windows 8.1 update

Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
 

http://www.techspot.com/community/topics/unable-to-connect-to-wifi-after-failed-windows-8-1-update.210268/
Relevancy 18.92%

With Broadwell and Skylake desktop CPUs expected to launch next quarter, the urge to upgrade my computer has never been stronger.

Read more
 

A:Weekend Open Forum: What CPU powers your computer?

Got an i5-2500k in my gaming computer, and a C2Q Q8200 in my home server. Because of the small enclosures they are in I have not overclocked them, with the watercooled 2500k being in a Prodigy case stuffed to the gills, and the Q8200 is in a 2U rack case.

Not sure about the server, but I know with Star Citizen in the distant horizon, I'm very compelled to upgrade around the end of the year. This is driven less by my CPU and more by my graphics card (watercooled GTX 570) and memory, which I only have 8GB.

edit: oh yeah, and my XPS 12 has an i5-4210.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-cpu-powers-your-computer.208477/
Relevancy 18.49%

A factory AMD or Intel heatsink is something I simply won't consider when building a computer. I acquired my first aftermarket cooler 15 years ago to assist in overclocking an AMD Athlon 500 (it reached 800MHz with help from a...

Read more
 

A:Weekend Open Forum: What heatsink / water kit cools your computer?

Mine is water cooled. Except instead of liquid its solid. And instead of water its aluminum. And instead of a pump its got a fan. Its actually a laptop.
 

http://www.techspot.com/community/topics/weekend-open-forum-what-heatsink-water-kit-cools-your-computer.209240/
Relevancy 26.66%

The $35 Raspberry Pi 2 launched earlier this month sporting a wealth of upgrades and apparently, one of the most peculiar hardware bugs in recent memory.

Read more
 

A:Weird bug alert: A simple xenon camera flash can crash a Raspberry Pi 2

Wow.
Reminds me of what a big solar flare could do.
 

http://www.techspot.com/community/topics/weird-bug-alert-a-simple-xenon-camera-flash-can-crash-a-raspberry-pi-2.208723/
Relevancy 20.21%

This all started after I reset the router putting in new pass code I m using same name of the old SSID When you click to Windows SSID was to unable connect on the wireless network connection on the name of my SSID on connect it saying Getting information from SSID this sounds like Windows was unable to connect to SSID good thing that windows can see the router and talk to it Type in the network key same thing looks like windows can see the router and talk Windows was unable to connect to SSID to it I type in the network key and OK Than it is saying windows was unable to connect to SSID name I have set up other computers and it can connect but this one computer running windows cannot I have the pass code down on paper and other computers can connect So wrong pass code is not the case The only thing I can think of is is computers using the old profile or my network card may need to be reset When I open networking sharing center and click on manage wireless networks I removed the old profiles in the list But I m not sure if there is still some kind of conflict or the old setting still there some where Well because I m using the same SSID despite the router reset and new pass code I m not sure why I cannot connect unless Windows was unable to connect to SSID the windows thinks I m connecting to the old SSID I tried to restart the computer and no change nbsp

A:Windows was unable to connect to SSID

Force the system to forget that SSD and then reboot.
Now look for it again and enter the passphrase.
 

http://www.techspot.com/community/topics/windows-was-unable-to-connect-to-ssid.207365/
Relevancy 19.35%

My Asus DRW 24B1ST CD/DVD-Rom device works in Dos (bootCD works no problems), and is recognized by my WinXP Device Manager and listed as working properly. But when I try to run or view a disk from My Computer, all I get is a blank window. The window has the correct partition/drive identity, so I know it's pointing to the device, but it just won't interact with the disk.

The same device was working fine in a previous WinXP installation on the same computer, but when I installed another WinXP sp2 (I had lost access to the original installation) I had a few glitches and this is the remaining one that needs to be fixed.

BTW, I can bootup from a bootCD and run a miniXP and have no problem with the CD/DVD-ROM device, so the issue must be with the current WinXP installation.

Any suggestions for repairing this problem?
 

A:CD-ROM device won't open or run disk

Wow very interesting. Yo had mentioned it will boot to disc, have you tried while in safe mode. So if you restart computer and utilize the function f8 button go to safe mode with networking check to see if it works in there. If it does then I assume it is driver related issue. Of course in safe mode it loads minimum drivers to have a functioning safe environment. Even though windows recognizes it in device manager does not mean it has a working driver. I would even go as far as uninstalling the driver and reinstalling one from the manufactures website. You could first try uninstalling the driver then rebooting the computer then letting windows reinstalling the driver upon boot up to see if that fixes it first. Hope this helps let me know what you find.
 

http://www.techspot.com/community/topics/cd-rom-device-wont-open-or-run-disk.206972/
Relevancy 20.21%

So I have a very strange issue with my laptop.
It's a Toshiba a665-06f
I7 [email protected]
8gb ram
500gb Samsung ssd
Running Windows 8.1 pro

I can't get into the bios it boots in less than 10 secs, I've even tryed removing the hdd to get it to boot to the bios but it just sits at a blank screen when I do that. I've tryed tapping the all the f keys the del and esc on start cant get into the bios or even the boot options. Other than not booting into the bois it works great.
Any ideas please?
 

A:Unable to access bios

"Other than not booting into the bios, it works great"... So this means you can boot into Windows normally, and use the laptop?
 

http://www.techspot.com/community/topics/unable-to-access-bios.206928/
Relevancy 19.78%

The (Tp internet connect to 740n) router link via Unable to router worked fine in the past until recently my ISP had a break in the cable line and repaired it Now I am unable to connect to the internet If Unable to connect to internet via router (Tp link 740n) I connect the ISP s LAN cable directly to PC windows and do the following steps Control panel gt View network stats and tasks Setup a new connection or network gt Connect to the internet gt Next Broadband PPPOE gt Next Type in username password gt Connect Internet works fine This means there is no problem with the internet connection However if I connect the ISP s LAN cable to the quot blue quot port of the router and the short LAN cable to my PC then do the following steps Open http tplinklogin net It shows me router config page Click Quick setup gt Next Select PPPoE gt Next Type in username password gt Next Leave the Wireless Page untouched gt Next Click Reboot Wait till router reboots It does not work the router page shows quot Connecting quot but does not connect at all Here s the router log TL-WR N System Log Time - - s H-Ver WR N v S-Ver Build Rel n L M W PPPoE W M G st day OTHER INFO User clear system log st day PPP NOTICE PPPoE start connecting st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x de st day PPP INFO sent PADI Host-Uniq x de st day PPP INFO sent PADI Host-Uniq x de st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x d st day PPP INFO sent PADI Host-Uniq x d st day PPP INFO sent PADI Host-Uniq x d st day PPP ERROR Timeout waiting for PADO packets st day PPP NOTICE Standard authentication st day PPP INFO pppd start st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x st day PPP INFO sent PADI Host-Uniq x nbsp

A:Unable to connect to internet via router (Tp link 740n)

Please help me
 

http://www.techspot.com/community/topics/unable-to-connect-to-internet-via-router-tp-link-740n.206843/
Relevancy 20.64%

I'm attempting to connect my laptop to my Wi-Fi but I'm having problems. I'm able to connect other devices with no problems, but when I try connection my laptop I get a "limited connection" message with a yellow triangle. Someone please help!! Tell me what info about my laptop you need from me.
 

A:Unable to connect to Wi-Fi

"Other devices"? Do you mean other WiFi networks? If so, then reboot your router. Also make sure your laptop's wireless can handle what your router is outputting (ac, n? 2.4vs5.8Ghz).
 

http://www.techspot.com/community/topics/unable-to-connect-to-wi-fi.205919/
Relevancy 20.21%

I've never come across this and need a few more heads on this. All of a sudden this evening I am unable to upload to the internet. I've tried uploading to Facebook, gmail, and drop box all with a laptop, galaxy tab, HTC one phone, ( these three on wireless internet) and our hp desktop (hard wired). I can download from each program with all devices as well as browse internet and play YouTube videos. I've rebooted each device. Rebooted modem, router, as well as removed the router from the equation. I had my local isp (Wow! Internet) reboot their end twice. They say they have no problems in our area and it's not on their end.... Anyone ran across this or have any ideas?
 

http://www.techspot.com/community/topics/unable-to-upload-can-download.205781/
Relevancy 19.78%

As the title says I'm trying to connect my HP3050 printer to my computer wirelessly. Problem is I get this:


The story goes that in the past week or so we swapped to a different internet provider and have swapped out the old modem/router for one that the new company has provided.
Prior to this no problems at all.

How do I counter this, I.e. remove the problem of what appears to be the availability of two routers, the new and the old?

Thanks,
Tom.
 

http://www.techspot.com/community/topics/unable-to-connect-my-hp3050-printer-wirelessly.202822/
Relevancy 19.35%

Hi,

I'm hoping someone will be kind enough to help with a problem. I am connected to my internet network on my PC through an Ethernet cable, but cannot access the internet through a browser or anything else. This is the second time this week this has happened. I had a separate PC issue early this week which caused me to reinstall windows. I have had the issue with connecting to the internet occur twice now since reinstalling windows, both times after installing windows updates. I resolved the first occur acne by having my ISP come out. I do not know what they did to fix the problem, only that the router was not the source, and he changed something while logged into the modem settings. Any help would be appreciated.
 

A:Cannot open web page, connected to router

First get a command prompt and then issue these to commands
ping 8.8.8.8
nslookup www.google.com

both should give some answers, neither should timeout or show errors
 

http://www.techspot.com/community/topics/cannot-open-web-page-connected-to-router.202181/
Relevancy 20.21%

I bought a Samsung 840 SSD (120GB) for my gigabyte GA-770T-USB3 motherboard. I am unable to install win 7 64bit on it. It is a SATA SSD.

I have tried ACHD mode in the BIOS, I have tried IDE mode. The drive works as I have tested it as an external drive on other computers.

I bought the drive specifically to be used as a primary drive.

My regular hard drives work fine on the motherboard.
 

A:Unable to install SSD on Win7 x64 system

Well, first of all, your motherboard only supports 3GB/s and the 840 is a 6GB/s drive. Just by that you won't really get your moneys worth. And how so are you unable to install? Also can you please list your system specs?
 

http://www.techspot.com/community/topics/unable-to-install-ssd-on-win7-x64-system.190141/
Relevancy 18.92%

We have a new Dell Precision laptop but cannot get two of our USB flash drives (both Lexar Jumpdrive SecureII Plus) to work. They work on our other computers. We can connect other USB devices to the new laptop, including an older flash drive. Strangely, if the problem drives are plugged in before the computer starts they will open properly - but I cannot remove them and plug them in again later.

They do beep every so often. USB Mass Storage shows up in Device Manager, with the warning exclamation. Disk Management will briefly show a disk (1 or 2) with "no media"; sometimes it will disappear then reappear for a second or so.

I have checked for USB driver updates, uninstalled and reinstalled USB hubs shown in Device Manager (though I'm plugging directly into the side of the laptop). I do not understand what would cause these drives only to not work with this computer only.
 

A:Some usbs drive fail to open on newest computer only

I forgot to mention: the laptop is running Windows 7 Pro.
 

http://www.techspot.com/community/topics/some-usbs-drive-fail-to-open-on-newest-computer-only.199812/
Relevancy 19.78%

Hello everyone,

I'm using windows 7 on my pc and try to connect to my home wireless connection .
every time I try to connect and enter the password, it won't be connected.
However, I'm using my laptop and phone to connect and it worked properly.

Please help my problem
Thanks in advance
 

A:Windows 7 unable to connect to wireless connection

How is your wireless Configured. I have seen many issues when using mixed mode in certain Linksys or Cisco Products. What kind of adapter are you using on y our PC for wireless Connection? Has it ever worked?
 

http://www.techspot.com/community/topics/windows-7-unable-to-connect-to-wireless-connection.199928/
Relevancy 20.21%

Hello
guys please I need your help, my laptop keep saying
Unable to connect to the proxy server what can I do to fit it please
 

A:Unable to connect to the proxy server

You are getting this message because the laptop can't find a wireless network to connect to...
 

http://www.techspot.com/community/topics/unable-to-connect-to-the-proxy-server.199618/
Relevancy 63.64%

Previously used this phone with Zune on my now-deceased PC with Windows XP (although even that took a while to establish). Now have an HP laptop with Windows 7 but Zune consistently refuses to recognize it and just comes up with the usual 'disconnect, turn off and reconnect'. I have downloaded both Microsoft Fixes and neither of them find anything wrong; I have uninstalled/reinstalled countless times; I have been into my certificates and made changes and/or deletions - and I m now simply running out of options ...and patience if I'm honest.

Almost all the internet advice suggests the fix is easy. Would the fact I've worked on this for over a month now suggest I am a one-off?!!!

A Google search revealed that there are many people who have had the same problem still unresolved after two years or so - just as often with other Windows Phones rather than Nokia. Can anyone help please?
 

A:Microsoft Zune will not recognize my Nokia Lumia 800...

Any luck with this?
 

http://www.techspot.com/community/topics/microsoft-zune-will-not-recognize-my-nokia-lumia-800.186486/
Relevancy 18.92%

I am currently trying to open my laptop so I can clean the processor/graphic card due to over heating. Though I took off all the screws off and no part seems to open... I tried looking on youtube but the models are different. Can someone please help me out?
 

A:How to open an asus laptop - a75v model?

Similar Asus models might help you even though they are slightly different. You probably have missed a screw hidden in the hard drive or memory/wifi bays...
 

http://www.techspot.com/community/topics/how-to-open-an-asus-laptop-a75v-model.198868/
Relevancy 20.21%

I am finding this problem to be a bit of a puzzler I have pc s networked together and connected to the internet through a switch and Unable the browse internet 7 to Windows then to a BTrouter all connected via Ethernet cabling None will connect to any page using IE one Unable to browse the internet Windows 7 has google chrome that will open google do a search if Unable to browse the internet Windows 7 I type in a subject but if I try to open one of the found pages it won t open them if I type in a website address same problem If I go into windows Live mail it will send and receive mails suggesting to me that internet is connected I have ran scans with Combofix and Malwarebytes which found next to nothing and booted into safe mode but still no success I can access the software on the routers so that connection is fine Have rebooted router and also changed the router for a different make and still no success both routers seem to tell me that broadband is connected This was all working OK some days ago and then all stopped working Any suggestions would be gratefully received nbsp

A:Unable to browse the internet Windows 7

Let's try this; using an Admin user login, get the command prompt and then enter:

ipconfig /flushdns
net stop "dns client"
Quit any existing browser, restart a browser and try Google again.
If you can run like this (btw: it will be slower to resolve the url), then we need to investigate youretc\hosts file. If you still can't surf the net correctly, we need to dig deeper.
 

http://www.techspot.com/community/topics/unable-to-browse-the-internet-windows-7.198415/
Relevancy 19.78%

Well my cpu usage goes up to anything CPU whenever 100% open I usage or run whenever I open anything explorer or fire fox or when I try to install a program that s my pc Processor Inter R Pentium R CPU GHz GHz Installed memory GB Display adapter Nvidia Geforce GS I 100% CPU usage whenever I open or run anything tried the next but didn t succeed 100% CPU usage whenever I open or run anything to solve the problem - performed an virus scan using kaspersky and Avira - performed spyware scan using spyware doctor - performed malware scan using Malwarebytes Anti-Malware - reinstalled the OS several times tried windows seven ultimate and bit and windows xp sp bit - formatted my hard disk then installed a fresh copy of windows - checked the CPU temperature and made sure it s fine - tried removing one of my rams - tried working with the build-in VGA card instead of the nvidia one - tried restoring the BIOS default setting - even tried changing the processor itself but with an older one - and of course tried to see which progress sucks up the cpu usage and the result is that every program I open gets to of the cpu usage and yet I couldn t solve this problem wonder if any of u can help me thanks in advance nbsp

A:100% CPU usage whenever I open or run anything

Rick said:





In the Task Manager, if you were to click "Performance" and then enable "Show Kernel Times" under the "View" menu, what do you see? There should be a red line which indicates kernel times. If the line is abnormally high, then that's a good clue this could be driver related or hardware related.Click to expand...

Thanks for your reply!

I don't know if that's abnormal or not, but you can check that photo and see

sorry I couldn't post it as an image.
 

http://www.techspot.com/community/topics/100-cpu-usage-whenever-i-open-or-run-anything.163635/
Relevancy 16.34%

Hi I m trying to play warcraft with my friend and we just got a problem which can be solved through portforwading And so I did it But still my PFPortChecker keeps telling me the messege quot Your port is not open or not reachable quot So I don t know what I did wrong I have only one router I checked it with some program which can tell me if there is a router covering my router I ve opened the settings of my router got into Virtual Servers created new chosen ports in range - applied to all tcp and udp confirmed It looks like its working but its not I ve got my firewall turned off and even so I added rules there for those ports I even turned off my antivirus Still its not working - just saying that its not open or not reachable Any ideas I ll appreciate any help and sorry for my grammar I m not from english speaking country so there might be a lot of mistakes nbsp

A:"Your port is not open or not reachable."

Okay what are we working with here?

OS?
Router?
System Specs?
System OC?
System Tweaked to the Max?
System Ports Changed or on defaults? Meaning you haven't changed anything only on the Router.
Under Services.msc did you set the UPnP to auto/start/enable

In the Router make sure you have the system set to the Port you want open and IP address should be Reserved by mac address of the NIC.

Are we using any other layered firewall software?
Are you using a Proxy?
Are you using Private Browsing?

What firewall are you using on PC?
 

http://www.techspot.com/community/topics/your-port-is-not-open-or-not-reachable.195947/
Relevancy 19.35%

When I connect my external hard drive to my computer it is recognized and shows up and everything but for some reason it can't be opened. This problem started after my brother put some wii games in there and connected it to the Wii...

I clicked on properties and it reads 0 bytes so nothing is detected when I scan it for viruses. (finishes after 5 seconds)

Even though it shows 0 bytes it still has all the data cause after this, I connected it on my wii and it has the games and on blu ray and it shows every video and photo I put in there, it's just a problem with windows...

I don't want to format it because I have like 5000 photos from trips with my family and also some pretty important documents from my dad's work.
 

A:Maxell HDD shows up but won't open

I found the answer! The Boot sector was damaged and Windows before looking for the information on the hard drive it looks for this sector. So all I had to do was to get a Linux computer and it was able to open it, it would have also worked with a Mac. Didn't lose any file I had in there.
 

http://www.techspot.com/community/topics/maxell-hdd-shows-up-but-wont-open.195674/
Relevancy 19.78%

Problem:
I have a PC that has to connect to a server through a modem for security reasons.
While it is connected to the modem, a screen needs to be printed.
The printer that is being used is connected to the local network.
While connected to the modem, attempting to print gives the error "The RPC server is unavailable."

System:
Windows XP Professional SP3
Printer server is Windows Server 2008
Modem is old 56k modem connected by serial port (don't think that matters)

What I've tried:
I have tried modifying the routing table to force connections to the subnet that the computer and printer are hosted on.
route -p add 10.1.0.0 MASK 255.255.255.0 10.1.61.0 METRIC 40 IF 0x2
ip for the PC is 10.1.61.53, ip for the printer is 10.1.61.22, IF 0x2 is the integrated NIC
The RPC service is running, and I have also started the RPC locator

Any suggestions what I should do next?
 

A:Unable to print to network printer while connected to modem

These are correct

ip for the PC is 10.1.61.53,
ip for the printer is 10.1.61.22, IF 0x2
but this is not

route -p add 10.1.0.0 MASK 255.255.255.0 10.1.61.0
and should not be necessary at all, if the PC gateway is on 10.1.61.x

Instead, get the output of ROUTE PRINT and post that
 

http://www.techspot.com/community/topics/unable-to-print-to-network-printer-while-connected-to-modem.195362/
Relevancy 19.78%

Hi. I use a 1tb external hard drive to store music, photos and movies. I use it on my Imac, also on my Asus e-book. I see that the external hard drive is partitioned into two. How or why I don't know. What I do know is that the first part is now full, and I cant see the second part when plugged into the USB on either computer. Could anyone help me by suggesting how I can access the second 500gig? Id appreciate answers in plain English, I really dont understand more than the basics, and the clearer ans simpler the answers the more I will learn, and thanks to all those about to read this !
 

A:Unable to access both partitions on external hard drive

Back-up all your data on the first partition.​
Right click on "My computer" and click "manage".This should take you to the computer management screen.​
Look at the left, you should see an option that says "Disk Management"; Click on it.​
You should be able to see all the disc partitions, find your External HDD partitions.​
Right-Click on the 2nd partition and delete it.​
After that right click on your first partition and select the option to "Extend Partition"​
​If you are confused, or need confirmation for anything please don't hesitate to ask.​
 

http://www.techspot.com/community/topics/unable-to-access-both-partitions-on-external-hard-drive.195074/
Relevancy 19.78%

Alright, so I've had this devilish little netbook for like two years, and so far the OS and the charging port have been shot. Replacing the OS is easy, it's just I cannot, for the life of me, open the casing up. I've tried for like 1 year, taking out every single screw I see that's in the frame, but nooooo it still doesn't want to come off. I've jammed screwdrivers inside and tryed prying open which was probably a bad idea but I know I didn't break anything from doing that, just scuff marks on the outside. Gateway calls this son of a b**** the LT2016u netbook. I've tried looking for a disassembly guide but gave up like 6 months ago. If you help me, I will love you forever.
 

A:How to open up my netbook

After reading the title I couldn't help but think of a smart_ss comment for a reply. I will spare you the pathetic attempt at humor. I know you wouldn't be amused. lol

This video should answer your question, allot easier than any words I could type.
How To Replace The Screen In A Netbook Laptop - Gateway LT2016U
 

http://www.techspot.com/community/topics/how-to-open-up-my-netbook.194098/
Relevancy 16.34%

Hi guys
I have a 500G WD usb3 hard drive, I unmount it without safely remove, when I mounted it again can't open it and windwos need to be format it for useable, but I do some fix on it & now windows can search in files & find all data, I can see drive properties used/free space, anti virus can scan it with all data too.... but I cant open or explore it & don't open file/folders when I use windows search!!
Error :
N:\ is not accessible​Access is denied​ ​what I must do!!!?​
 

A:"WD hard" can't be open and explore

Which OS are you on for Windows XP, 7, 8? Also make sure there isn't any USB connections other than the mouse and keyboard. Also you might want to look for a program called USBDVIEW run that as the admin. What that does is searches your PC for multi-USB connections that are dead (disconnected) Those disconnections need to be removed off your PC. So you would select the red X to fix your issue.

Another way is to go into the System Device Manager then under USB Controllers and remove all of them. DO NOT DELETE driver. Then reboot the system. Windows will re-build the Controllers drivers.

If the WD 500GB passport gives you errors or you hear a clunk noise, then you need to place that drive into a ziplock freezer bag and stick a folded paper towel inside there (for moisture) Zip it up and place the drive into the freezer for 8 to 10 hrs. Take it out let it thaw then try using it again. Only do this if you have issues with the unit.
 

http://www.techspot.com/community/topics/wd-hard-cant-be-open-and-explore.193162/
Relevancy 20.21%

First post and here is the story I have an old broken XP laptop A friend loaned me his IDE SATA to USB cable so I could get some files off the hard drive I proceeded from computer another one Unable data to get to to connect and download what I wanted o my Acer windows computer I put everything into a folder I can open that folder and read the Docs and Unable to get data from one computer to another look at the pictures no problem I copied the info to an external HDD I tried to download it to my wife s laptop but it is not there I tried to load the same info on to a Cruzer Flash drive and transfer it the same way The folder is empty is what I get when I click on the flash drive letter If I put it back into my computer I can read it If I click properties of the drive it shows the space being used I also tried to put the info onto a laptop at work same thing If I add an unrelated file onto the flash drive it works normally These files are possessed Help I guess you can t edit the title nbsp

A:Unable to get data from one computer to another

It could be because you could have "hide hidden files/folders" checked. Just a guess, good luck.
 

http://www.techspot.com/community/topics/unable-to-get-data-from-one-computer-to-another.190609/
Relevancy 27.52%

Hi, I have an old dell inspiron laptop screen from a broken laptop and I have heard that you can purchase converters on ebay to turn the screen into a monitor, but I was also wondering if there is anyway to recycle the web camera to use it as some sort of a security camera, I know it would probably be easier to buy a security camera but im bored have alot of spare time and an old laptop screen with a web camera

Thanks,
Nathan
 

A:Recycle laptop screen and camera

If you're bored and have a lot of spare time, Google is your friend. Technically, yes, you can make it work as a monitor and stand-alone camera. I can't help you though.

Good luck and have fun!
 

http://www.techspot.com/community/topics/recycle-laptop-screen-and-camera.190132/
Relevancy 19.35%

We have a Seagate 9SEAN3-500E that connects to the computer but wont open when we click on the drive. We can see it connects but nothing opens. Also when we plug it in, the computer freezes. How can we fix this please?
 

A:Seagate external HDD does not open

Is it a new drive? Also if it is a older drive have you tried another computer?
 

http://www.techspot.com/community/topics/seagate-external-hdd-does-not-open.189298/
Relevancy 19.35%

My problem is I cant open the drive. But in My Computer window, it did display the drive but I cant do anything. Windows prompt me to format the disk which I already did but I got this popup "cannot open volume for direct access".

These are the solutions that I tried but failed:-

Use TestDisk but it doesnt even detect the drive.
Disk Management also didnt detect the drive.
Already used Command Prompt to repair the disk. It display this "Cannot open volume for direct access" which I run it as admin.

Here I provide a screenshot for reference.

 

A:Cannot open volume for direct access

Hmm; that's the primary partition with Windows on it - - can never format or partition the C:\ while booted from it

WHY are you attempting this?
 

http://www.techspot.com/community/topics/cannot-open-volume-for-direct-access.189735/
Relevancy 18.92%

I'm trying to open the right speaker because I think there's something wrong with the power/volume switch. Does anyone know how to open it?
 

A:I can't open my Altec Lansing ATP3 speaker

If you can't find any screws (they may be hidden), you might have to gently pry the enclosure apart. Sometimes the enclosures are glued
 

http://www.techspot.com/community/topics/i-cant-open-my-altec-lansing-atp3-speaker.154678/
Relevancy 16.77%

Hello I m having issues with my latency and I think I know the cause Today while trying things to fix the problem I stumbled upon this page in my router telling how many open sessions each connected device currently has On my network there are connected devices both are pc s One mine has a wired connection while the other roommate has a wireless connection My amount of open sessions ranges from to with peaks to while my roommate has to with peaks to I read up on the internet and came to the conclusion that this is not good I also read that these issues are often spyware virus related There is only one problem in fully determining roof through the Sessions" latency, High "Open the cause I don t have any access to my roommates computer If I m sure of the cause I can alert him about it but otherwise there s nothing I can do about his end One last thing I read about it was that the router may High latency, "Open Sessions" through the roof also be doing something wrong with the sessions but I don t quite understand what that was Something about keeping old sessions or something maybe someone else knows more about this Any help would be massively appreciated Marty P S I ran quot CurrPorts quot on my computer when about sessions were running and it came up with a list of around unkown processes system processes and chrome processes nbsp

A:High latency, "Open Sessions" through the roof

The unknown processes are sockets which have been closed and awaiting to be cleared - - not to worry, BUT
which CurrPorts column heading are you seeing this in?

btw: Your OS and the version of CurrPorts?
 

http://www.techspot.com/community/topics/high-latency-open-sessions-through-the-roof.186940/
Relevancy 65.79%

Before I get to the poll a little history is in order I got my first droid retiring my GS moved to iOS from WinMO few years ago But I think it is the most 920 or ATIV Lumia S regrettable of decisions I made Because despite the fact that I always went for the higher end droid at least of its time e g Desire SGS SGSII Sensation SGSIII to name few I never found a stable solidly performing android phone They all suffered from random crashes reboots sluggishness hang ups and I only install apps - I need nothing more They all have various annoying quirks as well e g SGS ATIV S or Lumia 920 III doesn t want to find any WiFi network at times folders on home screen will randomly open at ATIV S or Lumia 920 their own my older Sensation s screen would stop responding quot in some places quot etc IMHO almost all droids I owned had great hardware but a crappy OS Few months ago I got my hands on Lumia and used it along side my Sensation SGS III for months and my views about WP totally changed It easily outperforms all those multi-core droids with its dated single core SoC being absolutely rock solid and very easy to use UI unlike androids copycat of iOS It is time again to jump ship only thing to decide is should I get ATIV S or Lumia though I m tilting toward the later due to better support upgrade cycle of Nokia compared to Samsung However SuperAMOLED display of ATIV S will be more battery friendly and it also have expansion slot ATIV S comparison Lumia specs Specs of HTC X amp Accord rumored Lumia along side Samsung ATIV S So what you guys would pick nbsp

A:ATIV S or Lumia 920

I'm firmly set on the Lumia 920 right now. I've always had a thing for Nokia handsets, and until Android hit the scene I only ever owned them. Plus, I don't think I'll miss the lack of storage expansion (my SGS3 has 16GB now and I'm only using 1GB of it!), and I think Nokia will be quicker and more supportive with its own apps than Samsung will be.
 

http://www.techspot.com/community/topics/ativ-s-or-lumia-920.185141/
Relevancy 17.2%

Hi All I am having a weird issue with my Cisco router From the router I am able to ping and reach out to the internet but from the client I am able to reach out to the internet but unable to ping I am not sure where is the issue but when I traceroute to it my packets are dropped at my routers interface All my pings from the client time out I checked the Access list to make sure ICMP is not blocked Following is my running conf ip audit notify log ip audit po max-events ip ssh break-string ipv unicast-routing no ftp-server write-enable no scripting tcl init no scripting tcl encdir no voice hpi capture buffer no voice hpi capture destination interface Loopback description abc ip address interface FastEthernet description Connection to officeswitch ip address duplex full speed ipv rip abc enable no ipv mfib fast interface FastEthernet description ISP ip address ip access-group ISP -IN in ip access-group ISP -OUT out ip route-cache flow duplex full speed auto interface Serial description ISP ip address ip access-group Verio-IN in ip access-group Verio-OUT out ip route-cache flow serial restart-delay interface Serial no unable ping Can from router ping from client to but machines ip address shutdown serial restart-delay interface Serial no ip address shutdown serial restart-delay interface Serial no ip address shutdown serial restart-delay router ospf log-adjacency-changes network area default-information originate router bgp no synchronization bgp Can ping from router but unable to ping from client machines log-neighbor-changes network mask aggregate-address summary-only no auto-summary ip classless ip flow-export source Loopback ip flow-export version ip flow-aggregation cache protocol-port enabled ip flow-aggregation cache prefix enabled no ip http server no ip http secure-server ip as-path access-list permit ip as-path access-list deny ip as-path access-list permit ip as-path access-list permit ip as-path access-list permit ip as-path access-list permit ip as-path access-list permit ip as-path access-list permit ip access-list standard Access permit deny any log ip access-list extended ISP -IN permit tcp host any eq www log permit icmp any any log deny ip any log deny tcp any any eq ftp log deny tcp any any eq smtp log deny tcp any any eq log deny ip any log permit ip any any ip access-list extended ISP -OUT permit icmp any any log permit ip any any ip access-list extended ISP -IN permit icmp any any log deny ip any log deny tcp any any eq ftp log deny tcp any any eq smtp log deny tcp any any eq deny ip any log permit ip any any ip access-list extended ISP -OUT permit ip any any permit icmp any any logging trap debugging logging source-interface Loopback snmp-server community apricot RO snmp-server trap-source Loopback snmp-server location S Ellsworth Ave Suite snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart snmp-server enable traps tty snmp-server enable traps config snmp-server enable traps envmon fan shutdown supply temperature snmp-server enable traps bgp redistribute static route-map ISP PATH permit match as-path route-map ISP PATH permit match as-path set as-path prepend route-map SETPATH permit match as-path set as-path prepend I will appreciate any input to help me solve this problem nbsp

A:Can ping from router but unable to ping from client machines

I am able to reach out to the internet but unable to ping Click to expand...

ping is not required to have connectivity - - it is only a test & traceroute tool.

From the client, get a command prompt (or in Linux a Terminal) use nslookup google.com
If it returns the IP address of google, then you can ignore the ping problem
 

http://www.techspot.com/community/topics/can-ping-from-router-but-unable-to-ping-from-client-machines.185071/
Relevancy 20.21%

I?ve never had to set the BIOS password, but the kids are growing up and I need to lock access to my PC.

My Bios has two Password Options: Supervisor and User.

The Supervisor password was accepted, and before I attempt to change the BIOS settings, the Supervisor password is asked for.

Then I set the user password.

However, when I boot up the PC, I am not asked for any password and windows loads as usual.

What am I missing?

The BIOS is Award Software International, Inc. F4 HI 07/03/2007
 

A:Unable to set BIOS user password

Do you have the option mentioned below?

Setting a BIOS Password




...
Now you'll want to set your system to ask for that password every time it boots, so select the BIOS FEATURES SETUP option, to see a menu something like this:

Fairly obviously, it's the Password Check option we're interested in, so select it and change the setting to ALWAYS.

etc....Click to expand...


 

http://www.techspot.com/community/topics/unable-to-set-bios-user-password.183774/
Relevancy 19.35%
A:GTX 670, Radeon HD 7950 (open to suggestions)

MOBO: Your Motherboard has 1x PCIE 2.0 slot. So you are good for upgrading.
PSU: A quality PSU of about 550W or greater will power a single GTX 670 or HD 7950.

Is your new PSU included in the budget of $500?





Can anyone explain the difference between the same GPU but different manufacturer (Asus card costing more than the MSI one)?Click to expand...

Usually the difference between cards are small. Some will have better cooling or one may be OC'd while the other isn't. Or some may have dual bios capabilities. I remember my old HD 6950's from sapphire had the ability to be unlocked to 6970's. All in all, it really just depends on what you want. The cards are all going to perform generally the same. If it was me, id go for the cheaper one.

Here is a article about the diffirent HD 7950's available. Maybe it will add a little more clarity to what I was explaining.
http://www.tomshardware.com/reviews/radeon-hd-7950-review-benchmark,3207-14.html

If I remember correctly, the GTX 670 out performed the 7950 in most cases. But, then again. The 7950 can OC quite a deal to make it perform much like a 7970. See what others have to say, I hope I was able to help a bit.
 

http://www.techspot.com/community/topics/gtx-670-radeon-hd-7950-open-to-suggestions.182053/
Relevancy 19.35%

hey can anyone help me out here?

I tried portforward.com's guide and editing the registry game data port, still cant host games

running windows vista 7
 

A:Unable to host games in StarCraft with Comcast modem on Linksys e1000

Make sure the game is not blocked by any firewall.
 

http://www.techspot.com/community/topics/unable-to-host-games-in-starcraft-with-comcast-modem-on-linksys-e1000.181314/
Relevancy 18.92%

My I drive is reading: not accessible incorrect function. Please help
 

A:SD memory card not reading, usually open I drive to view

See if this might help How to Cleanup and Remove old USB Storage Drivers
 

http://www.techspot.com/community/topics/sd-memory-card-not-reading-usually-open-i-drive-to-view.180903/
Relevancy 19.78%

Hi Everyone


I have a laptop with Windows 7 installed, using USB 3G device connect though the Internet. The problem is I have 3 machines and a spare router that I want to share the Internet.

Can you please advise how to share the internet from a laptop through a router ?
 

A:Unable to share the Internet from a laptop through a router

Hello! Sadly, for all intents and purposes, it just doesn't work like that. I'm not saying it's impossible, because I have read how techies have made this happen - but it requires an insane amount of configuration, 3rd party software, a little programming, and a good grasp of linux. The router has to have the internet connection to share out to other computers. Go and get a wifi hotspot instead of a 3G USB device. The wifi hotspot, depending on the provider, should support up to 5+ connections. Another option is the see what ISPs are in your area, get service at your residence, then you could use the router. Hope this helps!
 

http://www.techspot.com/community/topics/unable-to-share-the-internet-from-a-laptop-through-a-router.179668/
Relevancy 19.35%

Hey guys, I'm new here
I'm having a problem. My hard drive has like 6 folders. Each one containing different stuff like Word documents for school and such and movies and music. Non of the folders are opening except for the music folder. When I click on the folder for movies it says---> "Windows cannot find 'F:RECYCLER\e621ca05.exe'. Make sure you typed the name correctly, and then try again."
-_______________- Seriously? What name? I didn't type anything.
My hard drive's name is "My Passport (F)". This is so frustrating!!! Please help.
Thanks a million <3
Buttercupsx
xXx

P.S: Those random questions at the end are annoying. I failed a bunch of em. Hehehe don't judge.
 

A:Hard drive won't open folders help!

Sounds like the folder you are trying to open is referencing a path that does not exist. Try the drive in another computer, try the drive in a different Operating system - see if the issue is still there. The drive might be failing or the data on it is corrupt. try downloading the WD diag utility for windows & test the drive. http://support.wdc.com/product/download.asp?groupid=218&sid=171&lang=en Post back!
 

http://www.techspot.com/community/topics/hard-drive-wont-open-folders-help.179647/
Relevancy 20.21%

I have a Dell Latitude D with Windows XP installed on it My Wireless adapter is an Intel R Wireless Wifi Link AGN My current issue is that after my router Belkin F D v crashed and had to be reset I have not been able to access my router It says it is unable to renew the IP address However I am able to access a different unsecured wireless network and my other computer has no trouble accessing the router When I try to run ipconfig to renew address Unable IP it opens the cmd prompt and quickly closes it I can run ipconfig by opening cmd prompt and entering the command from there The only thing that I can think of is that something got messed up after the router crash or its a result of installing Ad-Aware Antivirus which I have since uninstalled and am still having issues Any help would be greatly appreciated thanks Only shows settings for LAN which are IP Address Subnet Mask Default Gateway Under Wireless Network Connection Media State Media disconnected When I try to put a manual IP address into the wireless TCP IP settings it connects to my router for about seconds and then disconnects nbsp

A:Unable to renew IP address

I'm an *****

Leaving this post up for anyone wanting a good laugh... and for anyone else who is also dumb.

I solved my issue by retyping the password.

Nothing like wasting 2 hours over just needing to refresh the password... Ugh...
 

http://www.techspot.com/community/topics/unable-to-renew-ip-address.179909/
Relevancy 19.78%

i am unable to reset my router back to default username/password setting.ive been able to reset it in the past, but i cant remember what i did.

i have held the reset button down for 90 secs. then i unplugged the router while still holding down the reset button for an additional 90 secs. and finally plugged the power back in again still holding the reset button for an additional 90 secs.

ive tried switching between different web browser. default gateway is 198.162.1.1

tried using cmd prompt. used ipconfig /release. ipconfig /renew. just for the heck of it.

ive also read that this same model and version is giving alot of people trouble as far as resetting it goes.

honestly, im not sure what firmware i have installed. im not sure how to check it... if that may be the issue.

while trying to login to router via firefox, i get the security level 15 message

cant remember my username/password
 

A:Unable to reset linksys BEFW11S4 ver 4 router

Sounds like your router needs a hard reset, the following has helped me in some cases, but be aware, if these procedures don't work, than your router has gone bye bye, it's junk.

To reset your router to factory defaults, use the following procedure:

1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.

If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.

If you cannot get "Reply from ..." in step 9 above, your router is dead.

If there's some time left on any type or warrenty for this device, I would recommend using it, that is if in fact your router is dead.

Good luck.............hope this helps!
 

http://www.techspot.com/community/topics/unable-to-reset-linksys-befw11s4-ver-4-router.178724/
Relevancy 19.35%

I previously could open my flash drive; it appeared when I went to my computer.
Now I can't open my flash drive; it doesn't appear when I go to my computer. I went to disk management and the flash drive does not appear so I can't rename the drive.
I went to device manager and uninstalled the 3 usb root hubs and rebooted. The disk drive still did not appear when I went to my computer.
Does anybody have any additional suggestions?
Thanks
 

A:Can't open flash drive

This is a common problem with some brands and models when they have been dropped 18 inches or more, and there are great histories of defective ones. You acn pay to get the data off a defective drive... but the technicians and companies who do it are extremely expensive.

We see as many as 12 to 15 failed flash drives brought in to our shop every week.
 

http://www.techspot.com/community/topics/cant-open-flash-drive.178293/
Relevancy 20.21%

I want to use virtualbox software it says in settings that you need to enable the virtualization option in host system to add more than one cpu.But in the bios i was unable to find the option.Please help me.
 

A:Unable to see virtualization option in BIOS

may not support it. make sure you look up the processor you have and check if it supports it.
 

http://www.techspot.com/community/topics/unable-to-see-virtualization-option-in-bios.177946/
Relevancy 20.21%

I get "windows was unable to complete the format" error when I try to format my micro sd card on my computer. So I check everywhere in the drive and I find a folder that gives me "the file or directory is corrupted and unreadable" error when I try to delete or access it. I can delete everything else but it reappears after I reinserted the drive. I tried to format with command prompt and I get "invalid media or track 0 bad - disk unusable." I also treid Panasonic SDFormatter but I get "the memory card is write protected please release the write protect switch" which I did.This all happen after I tried to format it on my phone and connected it to my PC. I'm using windows xp pro build 2600 sp 3 and my micro sd card is a sandisk.
 

A:Unable to format my 2GB microSD

It could just be a bad sd card. They won't last forever.

What I would do (aside from what you've already done) is put the micro sd card in its full sd adapter (that came with it I'm sure) and then put that in a camera and format it there.
 

http://www.techspot.com/community/topics/unable-to-format-my-2gb-microsd.177968/
Relevancy 19.35%

On my usb, there is no problem with the slots themselves but the usbs keep talking about opening as an administrator, i tried that and still nothing.
 

A:USBs won't let me open files

Are you using Win 7?
 

http://www.techspot.com/community/topics/usbs-wont-let-me-open-files.176841/
Relevancy 19.78%

Hey there,

I am trying to pull old files from my hard drive that was in my old computer running Windows XP. I have it plugged in via extenal housing/Reader if you will and when I try to copy or drag the files a windows shows up saying access is denied. Is this because of user logins or something with XP or something crazy like this and is there a way to copy these files over to my other computer that is running XP as well.

Thanks
 

A:Unable to copy files from old hard drive even with carriage

You need to take ownership. Here is a thread with instructions: http://www.techspot.com/vb/topic8914.html
 

http://www.techspot.com/community/topics/unable-to-copy-files-from-old-hard-drive-even-with-carriage.176761/
Relevancy 20.21%

Using laptop Toshiba Satellite A -S with Vista installed originally I later had Vista removed amp XP installed and all XP updates are installed Device Manager shows Network Adapters Net Adapter and Intel PRO Wireless ABG The info on the Net Adapter is Realtek RTL x Family Fast Ethernet NIC The Properties for Bus Driver indicates version When using Windows Repair function for Connection I get this msg quot TCP IP is not enabled for Web to Unable via connect to telnet connection this connection quot I have researched other posts for this message and have tried just about every solution offered but nothing has worked Attempts to update the driver resulted Unable to connect to Web via telnet connection in msg indicating the current driver is the best available I went online to see if an update is available and on pcpitstop com found Windows XP -bit driver Should I download amp install this driver to see if it helps I have worked on Unable to connect to Web via telnet connection this for days and am at my wits end The reason I need the wired connection is that it must be used by Carbonite to perform a complete online backup of my computer nbsp

A:Unable to connect to Web via telnet connection

1394 is NOT ethernet, it is firewire (an apple standard) and is not (usually ) used to access the internet. You information is conflicting. The Intel PRO connection would be the one used for internet (WAN) or LAN. The firewire port looks completely different than an ethernet port and more resembles a USB connection.
 

http://www.techspot.com/community/topics/unable-to-connect-to-web-via-telnet-connection.176520/
Relevancy 20.21%

Yesterday I posted this Ethernet connect to Web via to connection Unable same info under the title quot Unable to connect to web via Telnet connection quot I have gotten no responses and realized I should have said Ethernet instead of Telnet My Ethernet connection is what my problem really is I have copied the content of the earlier post to this new post in hopes that someone will look at my problem and offer some advice Here goes Using laptop Toshiba Satellite A -S with Vista installed originally I later had Unable to connect to Web via Ethernet connection Vista removed amp XP installed and all XP updates are installed Device Manager shows Network Adapters Net Adapter and Intel PRO Wireless ABG The info on the Net Adapter is Realtek RTL x Family Fast Ethernet NIC The Properties for Bus Driver indicates version When using Windows Repair function for Connection I get this msg quot TCP IP is not enabled for this connection quot I have researched other posts for this message and have tried just about every solution offered but nothing has worked Attempts to update the driver resulted in msg indicating the current driver is the best available I went online to see if an update is available and on pcpitstop com found Windows XP -bit driver Should I download amp install this driver to see if it helps I have worked on this for days and am at my wits end The reason I need the wired connection is that it must be used by Carbonite to perform a complete online backup of my computer nbsp

A:Unable to connect to Web via Ethernet connection

KarenLB said:





I have gotten no responses, and realized I should have said Ethernet instead of Telnet.Click to expand...

BIG DIFF



Here goes .......

Using laptop Toshiba Satellite A135-S4427 with Vista installed originally.
I later had Vista removed & XP installed, and all XP updates are installed.
Device Manager shows 2 Network Adapters:

1394 Net Adapter and <IGNORE THIS ONE
Intel PRO Wireless 3945ABG.
The info on the 1394 Net Adapter is: Realtek RTL8139/810x Family Fast Ethernet NIC. The Properties for 1394 Bus Driver indicates version 5.1.2600.5512. When using Windows Repair function for1394 Connection,Click to expand...

1394 is the Fireware adapter that competes against USB. If you know how, just disable for now in the Device Manager - - else just ignore it.





I get this msg. "TCP/IP is not enabled for this connection". I have researched other posts for this message and have tried just about every solution offered, but nothing has worked. Attempts to update the driver resulted in msg. indicating the current driver is the best available. I went online to see if an update is available, and on pcpitstop.com found Windows XP 32-bit driver 5.719.0325.2009. Should I download & install this driver to see if it helps? I have worked on this for 2 days and am at my wits end. The reason I need the wired connection is that it must be used by Carbonite to perform a complete online backup of my computer.Click to expand...

First; disable IPv6 (if any) with this link

Reboot and wire the connection to your router (be sure your WiFi is disabled or at least has the switch in the off position).

get a command Prompt
(start->run->cmd) and enter ipconfig /all >myTCP.txt
follow-up by attaching the file myTCP.txt or copy/paste its contents . .
 

http://www.techspot.com/community/topics/unable-to-connect-to-web-via-ethernet-connection.176555/
Relevancy 19.35%

Hello fellow nerds of the internet I built myself a nice 6970 or unable to computer rate New HD play games system new computer yesterday I ghz windows bit gb ram New computer HD 6970 unable to rate system or play games etc but the video card is the ASUS AMD knock off aka HD Direct CU I have had absolutely no problems watching videos or any of the normal day to day running of the machine and am able to use the higher resolutions for my monitor except the moment I attempt to play a game the game crashes anti climatically revealing my desktop Whilst I am grateful for the lack of full system crashes I built my gaming computer for get this GAMING so I am a tad bit annoyed I also attempted to do a windows machine rating however that failed coming up with an error report The windows experience index for your computer could not be computed Could not measure video playback performance When I attempted to launch Star Wars The Old Republic I received the error report Error code incompatible system Please verify your system is compatible with this game When I attempted to launch Crysis I received the error report Unsupported Video Card ASUS EAH Series vender x x device x Continuing to run may lead to unexpected results of crashes DX Diagnosis ------------------ System Information ------------------ Time of this report Machine name NYX-PC Operating System New computer HD 6970 unable to rate system or play games Windows Home Premium -bit Build Service Pack win sp rtm - Language English Regional Setting English System Manufacturer Gigabyte Technology Co Ltd System Model Z XP-UD R BIOS Award Modular BIOS v PG Processor Intel R Core TM i - CPU GHz CPUs GHz Memory MB RAM Available OS Memory MB RAM Page File MB used MB available Windows Dir C Windows DirectX Version DirectX DX Setup Parameters Not found User DPI Setting Using System DPI System DPI Setting DPI percent DWM DPI Scaling Disabled DxDiag Version bit Unicode ------------ DxDiag Notes ------------ Display Tab No problems found Sound Tab No problems found Sound Tab No problems found Sound Tab No problems found Input Tab No problems found -------------------- DirectX Debug Levels -------------------- Direct D retail DirectDraw retail DirectInput retail DirectMusic retail DirectPlay retail DirectSound retail DirectShow retail --------------- Display Devices --------------- Card name ASUS EAH Series Manufacturer ATI Technologies Inc Chip type ATI display adapter x DAC type Internal DAC MHz Device Key Enum PCI VEN amp DEV amp SUBSYS BC amp REV Display Memory MB Dedicated Memory MB Shared Memory MB Current Mode x bit Hz Monitor Name Generic PnP Monitor Monitor Model W Monitor Id GSM B Native Mode x p Hz Output Type DVI Driver Name aticfx dll aticfx dll aticfx dll aticfx aticfx aticfx atiumd dll atidxx dll atidxx dll atiumdag atidxx atidxx atiumdva atiumd a cap atitmm dll Driver File Version English Driver Version DDI Version unknown Driver Model WDDM Driver Attributes Final Retail Driver Date Size bytes WHQL Logo d Yes WHQL Date Stamp Device Identifier D B EE - - CF-C -B A C CA Vendor ID x Device ID x SubSys ID x BC Revision ID x Driver Strong Name oem inf ATI Mfg NTamd ati mtag NICayman ci ven amp dev Rank Of Driver E Video Accel Deinterlace Caps n a D D Overlay n a DXVA-HD n a DDraw Status Not Available D D Status Not Available AGP Status Not Available ------------- Sound Devices ------------- Description Speakers Realtek High Definition Audio Default Sound Playback Yes Default Voice Playback Yes Hardware ID HDAUDIO FUNC amp VEN EC amp DEV amp SUBSYS A amp REV Manufacturer ID Product ID Type WDM Driver Name RTKVHD sys Driver Version English Driver Attributes Final Retail WHQL Logo d Yes Date and Size bytes Other Files Driver Provider Realtek Semiconductor Corp HW Accel Level Basic Cap Flags xF F Min Max Sample Rate Static Strm HW Mix Bufs Static Strm HW D Bufs HW Memory Voice Management No EAX tm Listen Src No No I DL tm Listen Src No No Sensaura tm ZoomFX tm No Description Realtek Digital ... Read more

A:New computer HD 6970 unable to rate system or play games

I suspect it's a power supply issue.
 

http://www.techspot.com/community/topics/new-computer-hd-6970-unable-to-rate-system-or-play-games.176490/
Relevancy 19.78%

Heya i ve downloaded and tried to play the following online games Allods Shaiya Runes of Magic Lotro Everytime I downloaded each game and tried to connect to any of their servers it would always come up with a connection or client timeout error of some sort I m not sure if it has anything to do with my internet connection because recently I downloaded and played the beta for SWTOR online on my old crap vista laptop which is about years old Apart from very very low fps due to a terrible video card my swtor online servers unable game to connect Laptop to connection was perfect I also Laptop unable to connect to online game servers downloaded the swtor beta on my new laptop and after finishing the massive game download it came up with a data error though I can t remember what it was perhaps it is also related to my current problem My current IP is WIC New Zealand and doesn t have ethernet ports on modem Laptop specs WIndows -bit Home premium Service pack Toshiba Processor Intel Core i - CPU GHz GHz Ram GB Thats the basic information If you need anything else please let me know Thanks nbsp

A:Laptop unable to connect to online game servers

hi bunny 15405 welcome to TS
just quick idea here yhu dont have a firewall blocking the connections to their servers to yhu?

James
 

http://www.techspot.com/community/topics/laptop-unable-to-connect-to-online-game-servers.174944/
Relevancy 19.35%

I just started getting this error today. I thought it was due to some malware I had gotten but the malware forum tech support said everything looks fine. I get this message right as my VPN is about to authenticate. Can anyone help? This is driving me up the wall!
 

A:Cisco VPN AnyConnect issue: The VPN client was unable to setup IP filtering

What PC hardware are you working with?
 

http://www.techspot.com/community/topics/cisco-vpn-anyconnect-issue-the-vpn-client-was-unable-to-setup-ip-filtering.174986/
Relevancy 19.35%

Hi all I have installed the HP photosmart B a wireless printer onto my Asus laptop I run windows professional After installing the printer it seems to have saved to a z drive This is what it says when I try to open it from my computer z refers to a location that is unavailable It could be on a hard drive on this computer or on a network Check to make sure the disc is properly inserted or that you are connected to laptop Asus b110a to wireless from Photosmart to scan Unable the internet or your network connection and then try again If it still cannot Unable to scan from wireless Photosmart b110a to Asus laptop be located the information might have been moved to a different location I did Unable to scan from wireless Photosmart b110a to Asus laptop not load the printer using a disc this was done online It is wireless and I have a belkin router I can print document and pictures to the printer but unable to scan from printer to laptop The message I get on the printer screen is Try scan from computer or see documentation I am very confused so thanks for any help nbsp

http://www.techspot.com/community/topics/unable-to-scan-from-wireless-photosmart-b110a-to-asus-laptop.174987/
Relevancy 18.92%

Hi,

Not sure if this the right forum, but here goes. This has just started happening. Whichever window I have open, once I close the window I have the imprint of the window on the next window I open or on the desktop if no window is open. There are also vertical lines down the screen like you get on a TV set that are very pronounced. I have an ATI Radeon 4800HD series card running the lates drivers on a WINXP Pro system. I've tried going through all the setting but still can't get this to disappear. Any help would be appreciated.

Thanks,

Verity25
 

A:Background shadows from previous open window

its either the graphics card or monitor that is slowly dieing, but from the windows staying open issue i would put my money on the GPU being the issue, do you have onboard graphics on your motherboard? if so take out the graphics card and plug the monitor into the motherboard one
 

http://www.techspot.com/community/topics/background-shadows-from-previous-open-window.172107/
Relevancy 19.78%

HI
Two Linysy cisco router of same network 192.168.128.1 and 100 are given and the sever 08 has 128 network .the problem is if one router is off the another router is pinging..like tat it was pinging simultaneously.
the router is Not communicating at the same time to the two routers.Its communicating simultaneously
pleas help regarding this issue tat the server must be communicate to the both router at the same time
thank you
 

A:Two Linksys Cisco routers unable to communicate with server

this issue tat the server must be communicate to the both router at the same timeClick to expand...

hmm; as you express it, this is literally impossible.
There should only be one DHCP server on this lan. With the addresses you've provided, the server has only one connection to the router and thus it can literally read/write to one device at a time.

Code:

==== router#1
(128.1)
|
+ (128.08) Server
|
+ (128.100) router ===
I fear you are attempting to connect each router to an ISP and get twice the bandwidth;
usually it is wired like this

Code:

===router#1 ------ server ---- router#2 ===
the server would need two NIC cards, but this never works due to the routing tables.
 

http://www.techspot.com/community/topics/two-linksys-cisco-routers-unable-to-communicate-with-server.172024/
Relevancy 19.78%

Hello everyone. I know there's probably been posts similar to mine, but I have not learned all I wanted from previous posts. Recently, my hard drive gave out on my XP computer. The issue seems to be that it will not be read as a master drive, but will run fine as a slave on my other XP computer. That being said, I can view the general program files, ect. on the drive when viewed with Explorer in my Computer, but cannot access my pictures and music and such. As mentioned in similar post, the same amount of usage is being reported, but not all of that data is viewable or present. How can I access my pictures and music? (I understand from other posts that it might have something to do with it being password protected if my previous computer installation of XP was password protected?)
 

A:Unable to view administrator files on slave drive

User Permissions

Its more down to user permissions, you dont have permission to access it, Personally i would take the hard drive and slip it in a computer with windows 7, then reset the permissions to whicherever user i want ( this is done by right clicking the drive/folder and changeing under the permissions tab)

God luck
 

http://www.techspot.com/community/topics/unable-to-view-administrator-files-on-slave-drive.171696/
Relevancy 19.35%

i recently plunged in my flash drive, no auto play comes up, in my computer it gice the drive name but the name of the flash drive itself isn't there, it's just saying removable drive yet it is named.

It works fine in other pc's but not this one....any help?
 

A:My flash drive won't open

See if this might help How to Cleanup and Remove old USB Storage Drivers
 

http://www.techspot.com/community/topics/my-flash-drive-wont-open.171146/
Relevancy 19.35%

I have a 2009 windows vista, I am having a problem getting my cd-rom to work, my light does not come on at start up
 

A:CD-ROM door does not light up and will not open

Desktop computer I presume? Take the side off and make sure the power cable is seated properly.
 

http://www.techspot.com/community/topics/cd-rom-door-does-not-light-up-and-will-not-open.170370/
Relevancy 18.06%

Alright I have a whole bunch of my music and videos on my external hard drive and I got a new Dell XPS yesterday I had been using my external hard drive just fine for the past - yeas now with different laptops working fine I plugged it yesterday to transfer all my music to my new computer and it seemed to be working fine There was an error as the copy rate External Local -- won't open Disk as only working, shows drive hard stopped up slowwed so I decided to delete and try again I did that about times and then decided to just copy the music album by album Eventually I don External hard drive stopped working, only shows up as Local Disk -- won't open t know how it ended up happening instead of the Hard Drive coming up as Seagate on the My Computer Tab it started showing up as Local Disk J on my Dell and Local Disk E on my laptop now It doesn t matter where I plug it in Not only that it won t open when I try to open it It will get loaded and then just pause and stop responding I m completely lost My hard drive is Seagate GB nbsp

A:External hard drive stopped working, only shows up as Local Disk -- won't open

Hi, first I would run the Seagate diagnostics to check the hard drive is still healthy following this guide.



Identify the make of your hard drive and then use one of the links below to get the manufacturers diagnostic for ISO CD. Burn the image file to a CD, boot the PC with the disc in the drive and run the diagnostics. You first need to set the CD drive to 1st in the boot order in the Bios setup.

If you do not have an image burner use this free software to make the CD.

http://www.isoimageburner.com/



ExcelStor: http://www.excelstor.com/eng/support.php?sub_id=3

Hitachi/IBM: http://www.hitachigst.com/support/downloads/

Samsung: http://www.samsung.com/global/business/hdd/support/downloads/support_in_es.html

Seagate, Maxtor & Quantum:http://www.seagate.com/www/en-us/support/downloads

Western Digital:http://support.wdc.com/product/download.asp?lang=en

------------------------------------------------------------------------------------------------------

Toshiba Fujitsu: http://sdd.toshiba.com/main.aspx?Path=SoftwareUtilities#diagnostic

If you have a Toshiba hard drive I would suggest the use of the diagnostics from the Seagate link as this will work on all makes of drive and on any OS.Click to expand...

It sounds likely that the circuitry in the drive enclosure is failing (or the drive), if the test won't run then remove the drive from the enclosure and purchase a USB Hard Drive adapter, or use the internal connections in a desktop PC to connect the drive. This should allow you to run the test and/or extract all the files.

If the test runs ok with the drive connected to another PC internally, or with a USB adapter then you will know for sure that it is the enclosure that has failed.
 

http://www.techspot.com/community/topics/external-hard-drive-stopped-working-only-shows-up-as-local-disk-wont-open.169973/
Relevancy 20.21%

Hi all Thanks changing HDD Unable to after start in advance for everyone s help My computer have been plague with various problems in the last week No suddenly my main HDD was fried when computer starts POST can detect all my other HDDs Unable to start after changing HDD but not my main one I got this replaced with a new one both SATAs Unable to start after changing HDD After replacing the HDD i powered on my computer only to see that all of my HDDs are detected but the POST msg shows that my BIOS Clock is resetted and i need to either re configure or reset to default i chose to reconfigure went in BIOS before i can change anything computer hang i power off and on and then is unable to get the computer started Now when i press on my power switch the fans moves for a second and stops if i hold on to the power button the fans moves in intervals just like you are rev-ing a car vroom pause vroom pause vroom pause Things i tired removing all of my cards including Gfx card sound card and on same problem removing all ram and reseat them same problem removing CPU and on same problem reseat all cables and remove all sata cables same problem starting the computer using jumping the system using the pins instead of power button same problem Green light is still on when the PSU is plugged in to the board My guess is that not only my HDD was fried maybe the PSU or the Motherboard also died Anyone have any suggestions on what other steps i can take before taking it to a repair shop for diagnostic test Specs AMD Gigabyte board PSU watt true power x gb kingston ram nbsp

A:Unable to start after changing HDD

Nothing shows on the monitor at all? If so, try replacing the power supply first
 

http://www.techspot.com/community/topics/unable-to-start-after-changing-hdd.169768/
Relevancy 19.35%

I have a Klipsch CS-700 and the DVD/cd door won't open. There is a DVD in it. I have tried opening it with the the remote control and on the console. I have looked for a small manual override button hole, like on some computer cd-rom drives, but I can't find one. Any thoughts?
 

A:My DVD/CD door doesn't open

There is a hole in front of the DVD drive. insert a pin and push.

Here is a sample image
 

http://www.techspot.com/community/topics/my-dvd-cd-door-doesnt-open.169679/
Relevancy 18.92%

A few years back I got an external hard drive (Nomad) as I was working on a book and studying photography and wanted to be able to back up all my work in case of a computer crash. Well, it turned out that I did have a crash, and everything was fine until I went to open up a file that contained a bunch of Microsoft Word files for my book.

When I click on the file in attempts to open it, after a long period of not responding, an error comes up that says exactly this:

"Location is not available
H:\Scotia\Writing\Stories & Novels is not accessible.
Incorrect functon."

Is there any way that I can fix this so that I can have the files back? I'm desperate, and without these files I lose a year of work toward a novel. Any help is deeply appreciated.
 

http://www.techspot.com/community/topics/file-on-nomad-external-hard-drive-will-not-open.167092/
Relevancy 19.78%

I tried to change my network settings from WPA to to network find was certificate log you unable on to Windows to the a WEP last night and like an I screwed it up I only wanted to change it over temporarily so I could access the wireless network with another device that isn t compatible with WPA I ended up having to restore the Linksys router to Windows was unable to find a certificate to log you on to the network its default settings I then tried to recreate the settings it had before with WPA before I messed it up It was on WPA -Personal AES and I changed the network SSID and passwords back from default Very basic I didn t set the Windows was unable to find a certificate to log you on to the network router up myself originally though so there must be something I m missing I am able to connect via Ethernet cable but when I try going wireless on both Windows laptops one XP and one Vista I get a message saying quot Windows was unable to find a certificate to log you on to the network my SSID quot Most of the searches I ran on Google had people suggesting that I uncheck quot Enable IEEE x authentication quot in the laptop s wireless Authentication settings but that is already unchecked Besides shouldn t the fix have to do with something in the router settings since the wireless was working before I mucked around with the router The laptop settings remain unchanged from the when wireless used to work so they should be okay right I also tried setting the router up using Wi-Fi Protected Setup but after the bar loads to the end it says it was unable to connect Anyone have any suggestions Or need more info that might help solve my wireless problems nbsp

http://www.techspot.com/community/topics/windows-was-unable-to-find-a-certificate-to-log-you-on-to-the-network.166793/
Relevancy 17.2%

I need real help I had cable internet mbs installed last September in my one bedroom apartment Before that I was connecting to a spotty mbs network that was open next door with home network any to but Unable to can connect to other network their permission I was able to obtain fast and efficient internet access for about or months and then it became intermittent For the past months I have been unable to connect through my home cable modem router at all I have been to the cable company and they have tested the cable modem router and Unable to connect to home network but can to any other network the Unable to connect to home network but can to any other network signal which comes into the router and out at fast speeds I have been to the place where I bought my laptop purchased at Staples last summer Others can connect though my wifi but I cannot It connects but gives me a DNS error It doesn t matter whether I am hard wired or on wifi I am running Win Home Premium bit on a compaq CQ - NR Notebook with a Vision AMD Athlon II P Dual-Core processor ghz with GB ram GB usable It contains an Atheros AR b g n WiFi adapter Realtek PCIe FE Family Controller Realtek High Definition Audio Built in pointing device mouse pad with a wireless mouse connected through USB port hard drive Hitachi HTS A A SATA Disk Device Apparently for some unknown reason my computer networking modules can connect to but won t or can t talk to the cable modem router supplied by my ISP Charter Communications but can access the internet though any other wifi service or hot spot without a problem - INCLUDING the very same ISP through other wifi spots in town They have tested and retested the cable modem router and have told me that without a doubt there is nothing wrong with the device even though normally I thought anyway a DNS error like this would be a server side error Please someone help me I am paying for this internet service and would love to use it If you require anymore information please ask and I will provide it for you I am sorry if this was covered in another post I searched and searched and was unable to find a post that adequately came close to the problem that I described above Sorry if I am so wordy HELP Regards to All William nbsp

A:Unable to connect to home network but can to any other network

Connect the system to your network and then
please get a command prompt (Start->RUN->CMD) and enter ipconfig /all >myTcp.txt
follow-up with the attachment myTcp.txt which will be in the directory shown in the CMD prompt window.
 

http://www.techspot.com/community/topics/unable-to-connect-to-home-network-but-can-to-any-other-network.164932/
Relevancy 19.35%

I'm upgrading a packard bell easy note s4's memory. It has one easy access ram port (empty) and the ram its using is internal. I want to upgrade both slots. The easy access is, well easy.

However opening the laptop turned out to be problematic. I removed every screw I could find (carefully placing same on a paper diagram of the rear.) However the back still will not open, its comes away slightly from the front (opposite side to the screens connection to the laptop.) But something is definitely still holding it in place.

All help will be greatly appreciated. Please and thank you.

Packard Bell EasyNote S4
MS-Model: ASD30 IN0009
 

A:How do you open a Packard Bell Easynote s4?

Have you removed the keyboard, there is probably a screw or two under it. I don't know this model but the RAM may be there as well.
 

http://www.techspot.com/community/topics/how-do-you-open-a-packard-bell-easynote-s4.164587/
Relevancy 20.21%

I am unable to write any words to my computers browsers in fact I cannot enter my password to enter windows xp professional. What do I do to enter my writing into my browsers and have my computer accept my password?

Thanks.
 

A:Unable to write to my browsers

I apoligize

The reason I could not write is because my keyboard was unplugged.

Sorry.
 

http://www.techspot.com/community/topics/unable-to-write-to-my-browsers.163741/
Relevancy 20.21%

I have a Dell Inspiron 530 with vista and every time i try to play a song from my external hdd i get an error message that says "This file does not have a program associated with it for performing this action. Create an association in the Set associations control panel.
 

A:Unable to play music from external HDD

This is the normal instruction for setting up a file association.

1. Open Default Programs by clicking the Start button, typing "default programs" and then clicking Default Programs in the pop up list.
2. Click on Associate a file type or protocol with a program.
This opens a list of extensions.
3. Choose the extension of the files that you wish to open then click on change program button.
4. Select the program you wish to associate the file with and click Ok.

If you have already done this try right clicking on the file and selecting open with then choose the player.
 

http://www.techspot.com/community/topics/unable-to-play-music-from-external-hdd.162582/
Relevancy 19.35%

The old hard drive completely failed to the point that I am unable to recover any data on it. So I put in a new hard drive and went to reinstall Vista and got the lovely error about needing to load a driver for the hard drive. I've tried every Vista driver listed and it won't load the driver for the hard drive. I flashed the BIOS, still no luck. The BIOS does not offer any options to change the settings on how to read the hard drive.

Any suggestions on what else I could try?
 

A:HP Pavilion dv6911om - unable to install Vista on new hard drive

Somewhere in your bios there will be a setting to select which mode the hard drive is running in. You may well have a SATA drive which Vista should have drivers for but in this case you need to set the hard drive to run in IDE mode then it should install. After installation load all the mobo drivers which should then allow you to set the HD back to sata/raid operation which is much faster.
 

http://www.techspot.com/community/topics/hp-pavilion-dv6911om-unable-to-install-vista-on-new-hard-drive.161850/
Relevancy 20.21%

Hi there,

HELP! I did read the Flash drive recovery post and it's not looking good for me but would like some input if anyone can help....

The issue: Using a 8gb USB flash drive and I'm unable to access the files. I am able to see it as a removable device - however the name is now "removable device" as opposed to the actual name - I can see in the properties the storage capacity and what is left - but it says "this folder is empty"?

Did I somehow screw this thing up? Is there a way to get my files back?

I get the same result when I plug it into any computer.

Any suggestions would be greatly appreciated!

Regards,
z
 

A:Can see flash drive, but unable to access

u can try using this utuility to format the drive.

HP USB Disk Storage Format Tool - v2.1.8
 

http://www.techspot.com/community/topics/can-see-flash-drive-but-unable-to-access.160477/
Relevancy 18.92%

i have dell studio 1558(with 1 GB graphic card) and i am using windows 7 just installed some days before and the problem is whenever i try to open any high graphic game then an windows pop up saying your something 36.dll file is missing.so, i downloaded .dll file from internet and copied it to the program file but no-ting's changes.please help me guys
 

A:Can’t open high graphic games

What is the make of your graphics card?
 

http://www.techspot.com/community/topics/can%E2%80%99t-open-high-graphic-games.160171/
Relevancy 20.21%

Hi

I am having issues with accessing my Harddrive .Its giving error Unable to access Eue to incorrect parameter
I have already run chkdsk but it did not solve the problem..same error

I have windows xp.Need data from the drive urgently(pdfs and docs)

Please help and guide

Thanks in advance
Sushree
 

A:Unable to access hard drive

Check the HDD operation mode from BIOS setup
 

http://www.techspot.com/community/topics/unable-to-access-hard-drive.158202/
Relevancy 19.35%

The computer specs Packard Bell iMedia P GHz Stock Cooler Asus P S -VM GB DDR RAM one stick is DDR the other is DDR the stick was added recently but the problem was occuring before that BFG GS MB GB IDE HDD IDE DVD-RW XP Home SP The for won't used XP Programs not if open hours on computer problem This is a family machine Programs won't open on XP if computer not used for hours its turned on first thing and turned off at night If we turn it on in the morning and go to use it in the late afternoon after not being used for a few hours if we click on a desktop shortcut to load a program it won t load The computer is responsive Programs won't open on XP if computer not used for hours it just won t load any programs If we restart the machine it works fine As far as we can remember this just Programs won't open on XP if computer not used for hours happened all of a sudden a couple of months back with no change we ve done causing it I ve had a look and I can t see any restore points for the or weeks when this problem started Things we ve done Virus scan with Virgin Media Security and Stinger no viruses Attempted System Restore no points to go back to around the time this started happening Any ideas I can t think of much without reinstalling which realistically isn t feasible at the moment nbsp

A:Programs won't open on XP if computer not used for hours

turn off hibernate.
 

http://www.techspot.com/community/topics/programs-wont-open-on-xp-if-computer-not-used-for-hours.157813/
Relevancy 19.78%

Hello everyone I am looking for some help disabling the onboard video on my emachines T so that I may install a PCI-E video card I have seen several similar posts to mine on here already and I have already tried many of the suggestions that I found unfortunately none of them worked I am hoping the impressive knowledge base on here can help me out Here s what I have The new card ATI sapphire HD PCI-express card I also bought a new watt power supply to ensure that wasn t the problem Simply installing the card did not work no video from the PCIE card and no video from onboard video while the new card was in place Disabled the ATI display in hardware manager -- still did not work Uninstalled ATI drivers in Add Remove Programs -- still did not work Went into BIOS and there is no specific setting to disable onboard video The best I could find was setting the video signal preference which I then changed to quot PCI-E quot -- still did not work Those were all of the possible solutions that I was able to find online I cannot install the card and then reinstall windows because I cannot get any video output from PCIE or onboard while the PCIE card is installed I m a bit Unable to disable 200 ATI Xpress onboard video eMachines/ frustrated that I spent money on the card and also on a new power supply Any ideas Thanks in advance nbsp

A:Unable to disable onboard video eMachines/ ATI Xpress 200

We will need to know the model of the e machine so we can find the motherboard make and model so we then find a manual.
 

http://www.techspot.com/community/topics/unable-to-disable-onboard-video-emachines-ati-xpress-200.157966/
Relevancy 18.92%

ok... well... this is a weird issue... my boss had this computer that had a bad power supply and wouldent put out video... before he asked for my help he removed the cmos battery... so... being his case is worthless... i had to remove the motherboard to replace it... after i got the new PSU installed and booted it up i had video but it sais i need to set the system time and date... but when i hit delete it wont go into setup... the keyboards good... CTRL+ALT+DEL works to reboot the machine... but after 15 seconds it sais it will shut off and it does... idk what it is... and i cant get into the bios.... i've tried clearing the cmos with the jumper but other than that i'm at a loss... btw this pc is a 6 month old custom build with an ASUS M4A78 PRO mainboard
 

A:Asus M4A78 Pro BIOS won't open... shuts off after 15 seconds

well... just because i think the bios needs to be reset... i'm just takeing the cmos battery out for 15 minutes... the jumper i cleared said CLRTC and it said jumpers 2+3 to clear and 1+2 normal... and i just figured since it was the only 3 pin configuration on the board that was it... that and its relatively close to the cmos battery... but idk... this is turning out to be a nightmare...
 

http://www.techspot.com/community/topics/asus-m4a78-pro-bios-wont-open-shuts-off-after-15-seconds.158002/
Relevancy 19.35%

I was wondering on how to open ports so i can run a server and be a host.
Can u please give me a simple guide on how to open ports on your router.
OR:
Is there any programs that can actually open ports on ur router for you?
cause im too lazy to do all that command promt stuff. but if using command prompt is the only wy ill do it.

Can u also teach me how to forward those ports to your router so that outside sources can access them.
 

A:How to open ports on your router

ragne2 said:





I was wondering on how to open ports so i can run a server and be a host.

Is there any programs that can actually open ports on ur router for you?
cause im too lazy to do all that command promt stuff. but if using command prompt is the only wy ill do it.Click to expand...

Opening a port is a goofy term - - let's start with just using a port.
For a port to exist, some program creates a socket and then uses it to LISTEN for connections. You can see this with (command prompt tool) netstat -oan
Programs which are awaiting connections show up like

Code:
TCP 0.0.0.0:[B]135 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]445 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]1030 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]3389 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]4186 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]8019 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]44334 [/B]0.0.0.0:0 LISTENING
TCP 0.0.0.0:[B]44501 [/B]0.0.0.0:0 LISTENING
the nnn are the 'port numbers' created by the program.

Q? Which ports are open? A: only those that exist, eg: port 135 is open, and port 136 is closed (ie doesn't exist).
Regardless of your other setups for the router and firewall, the port is not open unless a program is LISTENING.

HOWEVER, that's only one-third of the story; two other conditions must be met

the firewall on that system must be configured to ALLOW traffic to the specific port(s) desired
and, if a system not on your LAN needs access to a program on that system, then
the router must port forward
Consider this network
Code:

ISP==modem/router
|
+ ------- System A
|
+-------- System B

if System A has the program (and the port is listening and the firewall allows)
then System B can get to it without concern for the router at all.[*]

Now if your friend in New York wants to connect to System A located in Los Angeles,
then the router must port foward.

Port Forwarding requires that the server address never change,
so first you need to arrange to have System A use a static IP address on your router.
Once that's correct, then, using the documentation for the program on system A, you add a port forward like
forward port xxx to IPaddress-for-systemA​
SO; get [*] to work first and then deal with the router
 

http://www.techspot.com/community/topics/how-to-open-ports-on-your-router.157457/
Relevancy 19.35%

I just got a used laptop from a computer company and everything works fine but the DVD drive. If I push the eject button it will try to open and the light will flash, but it doesn't. It will read and burn DVD's and CD's great, but you have to open it manually with a pin, help would be greatly appreciated!
 

A:DVD drive won't electronically open

Can you navigate to the drive using 'My Computer' on W XP or 'Computer' on Vista and 7?

If so right click on the drive and try to eject it. Beats using a pin.
 

http://www.techspot.com/community/topics/dvd-drive-wont-electronically-open.157093/
Relevancy 19.78%

okay I hope im posting this in the right place sorry if I didn't. okay I have an hp presario desktop 2004 and i a unable to use the internet because my ipadress has disappeared i have tried turning off everything restarting new cables and everything ipconfig/release renew restore and nothing it won't show up and when i tried the releas it says that it has been released but theres nothing there with the renew it says unable to connect to the RPC driver. I have a cable connection so it's just a modem no router and i just use and ethernet cable to connect to the internet they are all working fine called cable company and they were unable to help either sais it must have something to do with the compter. so if there is anyone who can help please do i am desperate here....
 

A:Limited no connectivity unable to renew IP address

You have a computer that appears to be sic years old... after six years, several components are often damaged... especially the hard drive.
Do you have the software to format and install a new hard drive?
What is your configuration...
And HP Presario should be a Compaq Presario... I would borrow a computer to download all the drivers, or get somebody to download them for you. If you don't have install disks, you can buy them from HP via a phone call... if they have any left.
When is the last time your computer worked properly and what happened to apparently make it stop working properly.
Do you have a friend who is tech smart to help you take a look at the computer and its components?
 

http://www.techspot.com/community/topics/limited-no-connectivity-unable-to-renew-ip-address.156056/
Relevancy 20.21%

I just had to format my hardrive and reinstall Windows XP.

Now I am trying to connect to the internet via my already establisched Cable -> Router -> PC network but no matter what I try the 'Wizard' doesn't seem to do what I need.

I obviously have a connection at the cable modem and router since I was able to use the other PC in my house to post this.

The PC I just formatted IS connected exactly the same way it was before I reinstalled XP (with a hard line directly to the router).

I am frustrated that this is so non-intuitive.

Can someone PLEASE walk me through getting the PC to be able to connect to the internet again.
 

A:Unable to connect to internet/network

Is the network driver installed for your network card?
 

http://www.techspot.com/community/topics/unable-to-connect-to-internet-network.155831/
Relevancy 19.35%

I have been using my WD External drive mybook as they call it with Ubuntu until now recently connected it External Ubuntu 1TB Windows / drive mount to location - WD and Unable to my laptop running windows vista I know it sucks but I Unable to mount location - 1TB WD External drive / Windows and Ubuntu just got this laptop and using it instead of my tower to save power and just run the laptop x pretty much and the tower when I need it and during the day I keep it on but anyway s I copied a lot of files over to the external drive disconnected it and pluged it back over to my laptop running windows and none of the files were shown the files I just copied but the other stuff is still on it I get this message when reconnecting it to Ubuntu when trying to use it Error mounting mount exited with exit code MFTMirr does not match MFT record Failed to mount dev sdb Input output error NTFS is either inconsistent or there is a hardware fault or it s a SoftRAID FakeRAID hardware In the first case run chkdsk f on Windows then reboot into Windows twice The usage of the f parameter is very important If the device is a SoftRAID FakeRAID then first activate it and mount a different device under the dev mapper directory e g dev mapper nvidia eahaabcc Please see the dmraid documentation for more details Click to expand Have I damaged the drive I hope not and hope to fix this problem to run on both OS nbsp

A:Unable to mount location - 1TB WD External drive / Windows and Ubuntu

you need to run CHKDSK /f from a windows command prompt
 

http://www.techspot.com/community/topics/unable-to-mount-location-1tb-wd-external-drive-windows-and-ubuntu.146693/
Relevancy 19.35%

when I put any flash drive in my usb port, I'm getting a pop up showing the message- sdfsdf. My flash drives were working two days ago. No matter what flash drive I put in, i'm not able to open up my documents. It also happens on my other computer here at home. what could be the problem?
 

A:Can't open documents on my flash drives

It's potentially a virus or some remnants of a virus. I would suggest scanning your PC and the drives and disable the auto-play/auto-run feature so Windows doesn't try to auto start anything from removable drives.
 

http://www.techspot.com/community/topics/cant-open-documents-on-my-flash-drives.155729/
Relevancy 19.78%

Hopefully IT on campus here will get around to answering my questions eventually, but in the mean time i thought i'd try to figure this out myself.

About two weeks ago i started having problems connecting to the homepage of my school. I live on campus, and use the school's network. This is the only page that i cannot access. I can get to any other site with no problems, but this one times out every time. I cannot successfuly ping the site from my computer or from online ping sites, but i can access the site on other computers, and no one else is having any problems with it.

The page is my.ccuniversity.edu
 

A:Unable to access homepage of my campus network

Also, if i ping the site or use tracert, i either get a message that it has timed out, or that 10.10.41.1 reports that the destination net is unreachable. I think this is something weird with the campus network. I cannot ping anything successfully, or run a successful trace to any site.

I can access the page through ninjaproxy.

I cannot access by using a different DNS like open DNS

My IVP6 connectivity says No Internet access in the network and sharing center - I don't know if this is relevant or not.

and this is what i get with ipconfig

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : BrianCarrigg-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : cincybible.priv

Ethernet adapter Bluetooth Network Connection 4:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
#4
Physical Address. . . . . . . . . : 00-1F-81-00-02-50
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : cincybible.priv
Description . . . . . . . . . . . : Marvell Yukon 88E8071 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 00-22-68-66-44-BB
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5d07:f025:6c28:8664%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.10.41.61(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, October 25, 2010 10:52:41 PM
Lease Expires . . . . . . . . . . : Tuesday, October 26, 2010 10:53:36 PM
Default Gateway . . . . . . . . . : 10.10.41.1
DHCP Server . . . . . . . . . . . : 10.10.20.6
DHCPv6 IAID . . . . . . . . . . . : 268444264
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-4B-BB-2E-00-22-68-66-44-BB

DNS Servers . . . . . . . . . . . : 10.10.20.125
10.10.20.6
Primary WINS Server . . . . . . . : 10.10.20.6
NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek 8185 Extensible 802.11b/g Wireles
s Device
Physical Address. . . . . . . . . : 00-06-4F-7E-A6-CD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{5B07933A-BBD3-4DF0-A417-B2C791BD0867}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.cincybible.priv:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
 

http://www.techspot.com/community/topics/unable-to-access-homepage-of-my-campus-network.155505/
Relevancy 20.21%

My daughter's laptop has previously been able to connect to the internet via our Belkin router. For the past few days she has tried to accesss the internet and has been unable to connect. We tried to reinstall the router on her laptop but still no luck. Do you know what could be the problem?
 

A:Laptop unable to connect to Internet

Check in Device Manager under Network Adapters for any yellow or red marks.
 

http://www.techspot.com/community/topics/laptop-unable-to-connect-to-internet.155154/
Relevancy 20.21%

i was connected to a hotel network which functioned perfectly well until yesterday afternoon I could only get quot local only quot access using both the ethernet connection and the wireless connection and the network was unidentified after much googling i tried reseting the tcp ip flushdns reset winsock removed all saved networks and wireless networks using the ethernet cable i am unable to connect to the router at all getting the x x x ip i tested the connection using a live linux cd and the connection was stuck at quot obtaining ip address quot when i try to ping the router i get the message quot ping transmit failed error code quot internet connect to the Unable to using wireless lan i managed to connect to the router but the connection is hgihly unstable dropping back to quot local access only quot intermittently Unable to connect to the internet when i ping the router i get extremely high packet loss of upwards of with the message quot destination host unreachable quot most of the time i m running windows vista home basic and the linux system i tested with was backtrack is this a problem with the hotel s router or my computer s connectivity this problem is only present on my computer which is a dell inspiron all other computers and even my cellphone can connect to the hotel s network without any problems nbsp

A:Unable to connect to the internet

Even though this might not be of any help in solving the problem itself, but obviously there seems to be a problem with your computer, and not the hotel's network. If all the other computers and even your celluar phone could connect to the Internet, then the problem can be pretty much isolated to your computer alone.
 

http://www.techspot.com/community/topics/unable-to-connect-to-the-internet.151599/
Relevancy 18.92%

There is a great problem with my computer, i've got 5 partitions on my computer.but i can only open 2 of them using double click . Even if i explore them it wont open. that gives error message, "hsyo.exe has encountered a problem and need to close". i reinstall windows xp but it diidnt work. i cant give full format to the hard disk since it has some important data.


Can anybody give me a solution.
 

A:I can't open my partitons using double click or explore

you need your Install CD, login as Admin and get a command prompt;
enter SFC /SCANNOW {a space after the C & before the /}
 

http://www.techspot.com/community/topics/i-cant-open-my-partitons-using-double-click-or-explore.153770/