Enter administrator password or power on password the system disabled number 53352373
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
@wagidogg? Enter 42030975 Regards, DP-Khttp://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Enter-administrator-password-or-power-on-password-the-system/td-p/5809889
Please refer to the message below for information on how to remove your Dell laptop BIOS password. The information also applies to other manufacturers and summarizes a wealth of data collected from previous threads and thousand of posts related to this problem.
We no longer support any further discussion on this topic as we believe all the free help that could be given is already out there (the post below sums it up pretty well). You can always go back to your system manufacturer for support, as well as google for the dozens of third party paid support providers that are available online.
Summary of laptop password help thread:
Mobile Password Help
The following support information and downloads, are provided to help members freely remove their laptop password
If all options have been tried and you still require help removing your password, search Google for 3rd party alternatives
TechSpot forums and all support is provided freely at all times, it is against our guidelines to link to external paid services
You are advised to try any or all options, with your first point of contact being the laptop manufacture, being the best option
TechSpot forums are FREE and manufacture support only
Click >Dell Support and System Information for a particular Service Tag
> Click > HP Live Chat, Drivers, Warranty and Support Information thread
> Click > Toshiba BIOS Setup / BIOS settings -- access instructions
Reset password on Satellite A205: http://www.techspot.com/vb/post613153-2.html
Reset password on Satellite A100 / A105: http://www.techspot.com/vb/post572530-1.html
Password types :
Power On Password (pop). this password can be reset by unplugging the cmos battery for a while, and plugging it back in.
Supervisor/bios Password (svp). this requires reading the eeprom chip (8 leg or 14 leg) with an electronic device by using another pc's serial port or by paperclip method if model type available.
Hard Drive Password (hdp). this is usually tied to svp, but not all the time. it requires special software and a library of known manufacturer's password. but can be cracked either recovering the data or wiping the data.
Transfer of Product Ownership
International warranty contact phone numbers
Old closed threads, with lots of info:
Dell BIOS password removal (Jun 07 - Sep 07)
http://www.techspot.com/vb/topic79263.html (543 replies)
HP / Dell / etc. Laptop password help thread (Jan-Mar 2008)
http://www.techspot.com/vb/topic97423.html (533 replies)
HP / Dell / etc. Laptop password help (April - July 2008)
http://www.techspot.com/vb/topic59293.html (937 replies)
HP / Dell / etc. laptop password help thread (Aug 08 - Apr 2009)
http://www.techspot.com/vb/topic109612.html (2200+ replies)
Dell Manuals :
DSTCD.iso : (Release date: 22-November-2005)
HTML Document: http://web.archive.org/web/20031103020606/http://qasimtoep.tripod.com/dell/dell6.html
PDF Document: http://www.savefile.com/files/2059217
laptops unlocked: http://www.techspot.com/vb/post645683-913.html
Chip 24C02 24C04: http://www.techspot.com/vb/post698486-1134.html
Dell IC Numbers: http://www.techspot.com/vb/post645922-916.html
Command line Uses => asset /? (eg Asset /o for owner tag)
HP OldPass .zip includes:
[*] unlock6.exe (made in 1997)
[*] BIOS_PW.EXE (made in 2003)
[*] HDD_PW.EXE (made in 2003)
HP Oldpass2 .zip:
As above, made as a copy, using another Zip program
Dell Latitude .zip:
D35B password generator (old generator)
Dell MasterPW .zip:
D35B password generator (old generator)
How to use
Power outage due to storm. Came back on without pictures and documents. It's an HP desktop. Would a file recovery program work? I've tried some of the instructions online, but they don't work.
Oh mary; I feel your pain. Were the pics within one folder and now they're ALL missing?
I've done no overclocking, no advanced work whatsoever. Every time I try to google my issue, all of the solutions seem to be based around the person with the issue overclocking their system thus causing high tempuratures. This is not that issue.
On to the actual problem, my motherboard reports temperatures of 69c when running any program that takes any worthwhile amount of system resources (and some that don't), in particular, most games. CPU and GPU tempuratures seem far lower, around 30-40c. Assuming the sensor isn't to blame (and it isn't, if the feel of the case is any indication), are there any reliable ways to lower MB tempurature with simple BIOS and power settings?
Running an old F1a55-M (FM1) on Win 7 Home Premium, SP1.
EDIT: The motherboard idles at 47, which also seems high. I've changed locations for better airflow several times and wonder if I just flat-out need a larger case.
Fans running, dust?
My laptop wont power on at all.
No charge light.
No light when power is pressed.
Was working fine yesterday.
Have tried battery and charger from identical working laptop to no avail.
Any ideas? I can usually fix laptops etc but if it wont power on at all I'm lost.
Did you try removing the battery and AC adapter and holding down the power button for 30 seconds. Then re-installing the battery and try booting again?
Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened I finish tower Power will not work button My the pc and My tower Power button will not work when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F PANEL cords u know the pwr switch and all that jazz turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading P S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds nbsp
You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
I have an older eMachines Desktop PC model EL1360G which has a 200 watt power supply.
I would like to upgrade it to at least a 400 watt power supply.
Does anyone have a suggestion as to where or what I should buy? I watched a few videos on youtube on how to do the replacement but how do I know all the plugs on the new unit are the same and will fit? Because if they don't, I'll be more confused than I already am.
Check and make sure all the connectors are the same as the ones you have
I'm not certain if the image above is what you have but I'm thinking it is.
Image above looks to have:
1x 20pin+4pin (ATX Power)
1x 4pin (P4)
2x SATA power
Does your power supply have these and only these?
FIXED The backplate of the video card looked exactly like my old one but it was somehow making my video card not slide down far enough took it off and now its running HUH ZA If there is a big danger in running it so lofty without a backplate message me and let me know If you have a msi g check the damn backplate I bought a nividia off ebay and my mobo does not detect it It lights up but that is it I can send it back but I wanted to know what I can try first I get this message system card My video does my detect not with the install cd when I use the auto driver updater on nvidia and when I manually download the driver from the nvidia site My old radeon worked fine Old card MSI R GAMING G -Bit GDDR This graphics driver could not find compatible hardware GV-N G GAMING- GD nvidia requires and pin connector Mobo z pro asrock CPU k PSU watt ocz sxs What I have done so far Connected the Power Connectors x My system does not detect my video card -Pin x -Pin From my old card to the new card Im using my old power converters could that matter Id use the one that came with the card but a damn wire is hanging out of its area Checked device manager no device Checked bios made sure pci-e x is the primary video card source Checked my bios mobo overview and it says there is nothing in that slot Uninstalled all amd and nvidia driver in the control panel Uninstalled all drivers with gurus free amd and nvidia Display Driver Uninstaller in safemode Reseated the card Googled a lot Im now going to reset the bios I heard I can also update the bios would that even matter am I just trying to hard to make this possibly DOA card work nbsphttp://www.techspot.com/community/topics/my-system-does-not-detect-my-video-card.216578/
I've got a S1150 system, which - as we all know - has a very limited amount of PCI-Express lanes. I recently invested in a couple NZXT S340 cases, and I find them extremely cramped for cable management. I'm considering dumping my dual SATA3 SSD raids in these computers in favor of M2 SSD's to eliminate some of the cable mess, but I'm wondering how this will affect my graphics card performance, as I believe this would cut my graphics card's PCI-Express lanes down to x8 (3.0), just as if I was using a PCI-Express SSD.
Does anyone have first hand experience with this type of setup?
Hi guys, new here...I'm setting up a new pc, sooo a few questions here.
I'm planning on getting an Asus A88XM-plus motheboard, Amd X4 860K cpu and Sapphire R9 280 3GB video card...so how much power supply would be enough...450-500W?..would 650 be an overkill? Is all of this fully compatible?
Do I need a sound card, modem or special cooling or something? ( I already have 2*8gb Ram sticks and HDD, don't really need DVD drive).
I'm also thinking in between Antec 902 V3 case and a lot cheaper LC Power Gaming 975b Air wing Midi...how much quality difference is there in between these two?
Also, how much improvement is there in between this card and my current one, sapphire r7 265 2gb?
Are there anything that you would exchange for something else...I'm on a tight budget, but I don't mind spending a few extra bucks if it be worth in the long run.
Thanks in advance.
Microsoft showed off a whole range of new PCs and devices running Windows 10 at Computex 2015, but one that really caught the eye is the Quanta Compute Plug, an entire PC integrated into a power plug the size of...
They may be handy to a lot and even have very reasonable prices but I can't imagine myself ever wanting any of these.
Hi, Guys (And Gals) I'm attempting my 1st PC build and HAVE used the various online power supply calculators... however I'd like to hear some feedback from you all. No matter where I look online I always like to come here to be sure. My specs for the build are as follows:
MoBo: GIGABYTE GA-F2A68HM-H FM2+ USB 3.0 MATX
Amd A6 5400K 3600Mhz Blk Edt 1mb 65w Socket FM2
Video Card: XFX RADEON R7 240 2GB DDR3 LOW PROFILE
RAM: ADATA XPG V1 DDR3 1600 4GB
HDD: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G
I would really like to use one of the 350W or 400W power supply I stripped from my previous PC's. I'm thinking of hooking it to an HDMI or VGA projector eventually though (Haven't bought it yet) Can I get away with one of these and play a game like World of Warcraft? or do I need to order something like the
SolidGear 650W PS2 ATX Power Supply on Tiger Direct?
Thanks in advance for any advice & thoughts
Over engineer the PS;
Calculate the actual needed power,
add a fudge factor and
multiply by 1.5.
Then round up to the next commonly available size
Here ya go T, the final product...well probably not
2.2Kw Holodeck 7
Gigabyte GA-990-FXA-UD7 (rev 1.1)
16GB Corsair Dominator Platinum 2133 MHz
4 X HD 7970 Quadfire
1x Corsiar AX1200W
2x FSP Group X5 500W =1000W
1XNexXxos XT45mm x 360mm Rads
2 x NexXxos XT45mm x 240mm Rads
1x NexXxos XT45mm x 120mm Rads
3X VPP-655 Pumps
1X Phobya DC-12-400 Pump
Koolance 370 CPU Block
4 x Heatkiller GPU X-3 Waterblocks
Rad Fans: Coolermaster Excalibur
Bitspower & Monsoon Fittings
Primochill Advanced LRT Tubing
Case CoolerMaster Cosmos 2
Heatkiller X-3 Multilink Quad Bridge
BitsPower Z-Multi 250mML Reservoir
Eyefinity 3+1 Extended 5760 x 1080-25" Monitors
I did end up going full parallel on the GPU's They go from idle @ 28c to 36c under load (Heaven 4.0)
I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp
During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.
Here's the situation. I have this old mITX computer I built a few years ago that I'd like to hook up to Dad's big-screen TV so he can Skype from his living-room. Problem is, the computer is VGA only and his TV is HDMI only. The MoBo has just one PCI (not PCIe) slot with a maximum output of 75watts.
I tried a PCI video card with HDMI output, but the slot couldn't drive the card. Didn't even detect it.
I believe DVI uses less power (the cards are definitely cheaper), and I could just use a simple DVI-to-HDMI cable. A native HDMI port would be better. As long as it works, I don't care. But w/o an external power input, the card can't draw more than 75watts from the PCI slot.
Anyone know of a card that fits this very specific bill? Thx.
ADDENDUM: PC only has a tiny 300watt PSU.
Check this one out: Zotac GeForce GT 610
It is a PCI Card (non express) that has DVI / VGA / HDMI. It is also a Low Profile and requires a 300w power supply or higher. It looks like it should work with your situation.
I recently moved my computer from one side of my desk to the other and somehow it managed to make it so when I press the power button nothing happens. I've disassembled and reassembled the computer numerous times and tested the psu. The psu is working and it seems like the motherboard is the culprit. What is confusing me the most is that when I short the 24 pin connector to the motherboard then plug it in if I also press the power button I can turn on the computer. I dont see that as a permanent fix just in case it sleeps and I assume it is not good for the computer so I am looking for help on how to permanently fix my issue. Thanks in advance.
Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.
I need help as fast as possible
I've got FSP Aurum Pro 1200W.
What UPS should I buy for that power supply if we assume that it has 100% workload?
See watts to KVA calc: http://www.rapidtables.com/calc/electric/watt-to-kva-calculator.htm
issue: what is the power factor?
hint: PF ~ 0.75
HI, I was wondering if it is safe to use an atx psu on a motherboard with an eatx power connector. The motherboard has a 24-pin eatx and a 4-pin atx 12v connector. I bought the motherboard and started using an atx psu and everything seems to work ok then realized after it was an eatx power connector on the motherboard. Are there eatx psu's? Thanks
EATX is a form factor (12"x13") not a power connector. I'm assuming you are talking about using a PSU with a 20 pin (old ATX) connector with a newer motherboard that has a 24 pin (current ATX) connector. If that is the case you will need to consult your motherboard's manual. Some 24 pin boards run fine with only 20 pins some don't. The issue is that each pin in only rated to carry a certain amount of current (Amps). If you overload one of these pins your risk burning or melting the ATX connector on either the PSU, Motherboard, or both.
I want to learn how to manage ARM processor power management with LINUX (for example the Cortex-A53 MP Core).
Can someone recommend literature, a tutorial or web based information?
Thank you in advance
My laptop keeps asking me for my facetime, icloud and messages password. I've entered the password but it keeps popping up. Even if I enter the wrong password it accepts it and asks me again in about 30 seconds. I have a Macbook Air but I don't know what system it is though. What can I do to stop this?
*IF* you would register, we might be willing to assist
I was given a year old Corsair power supply XMPSU- TX-C I wanted to make sure it Questionable Power Corsair Supply s working right before plugging it to a motherboard So I did the paper clip power on trick and all the voltages were ok I proceeded to connect just one harddrive The harddrive spins up and then Corsair Power Supply Questionable makes a revving noise every second as if its powering down and back up repeatedly Also theres a green LED light on the harddrive that blinks normally its a solid on This doesn t happen every time I cycle the power supply however When the harddrive powers up properly the LED light is constantly on and rpm is constant I tried two other harddrive with the same outcome The problem is definitely intermittent I connected all three harddrives with the same results I tried the same setup with two other power supplies with no issues at all I am now sure the issue is specific with the Corsair power supply Is it because there s not enough load on all rails making the power supply unstable The AC current draw was only mA so it wasn t the overcurrent protection kicking in The V line was steady Corsair Power Supply Questionable but the V line fluctuated a few hundredths of a volt in unison Corsair Power Supply Questionable with the harddrive revving The V line was steady when the harddrive powers up normally I m hesitant to connect a full computer to this Anyone have an idea before I try to RMA the power supply Is this just a peculiarity of this model nbsphttp://www.techspot.com/community/topics/corsair-power-supply-questionable.209459/
I am looking to get a new graphics card for my computer because atm it has integrated graphics, which as most of you know sucks. The power supply is 250W which I doubt would be enough to have a whole new graphics card implemented. The model is p6166f. The mother board has this for a graphics card slot PCI express 16x GPU. Please give me suggestions, I am looking to spend approximately 150 - 200 $ total.
We need to know who made your system. How old is your system?
So I've been thinking about upgrading my GPU from a GTX 760 2gb to a GTX 980 but I'm not sure if I have to buy a new Power Supply aswell. I'm using a 650W power supply.
My specs are: MSI motherboard(forgot the name), 8GB ram DDR3, SSD 200GB, HDD 1TB, DVD-RW, 2 120mm fans + the CPU fan , a core i5 4670k (3.40 ghz) and the gtx 760 itself.
Try this out; http://www.extreme.outervision.com/psucalculatorlite.jsp
my laptop HP g61 does not power on either with battery or when connected to the mains supply(AC). whenever i press the power botton the battery lit in the front of the system will only blink for about 3 seconds without the system been power on(the fan,the keyboard light nor the power botton lit will not on) i try to remove the battery nd press the power button for 30 secs before putting it back,still their is no respond. but i discovered each time i remove the battery and plug it to the Mains,the indicator power light beside the plug of the system will lit for about 3 seconds before it went off again.i have checked it with another charging adapter all to no avail. pls ,help me out.
Perhaps you have one of those infernal HP laptop motherboard problems? How old is your HP g61, and have you kept the cooling channels free of lint and dust? How old is the hard drive?
Since it doesn't work from a battery or from wall power, you should have an experienced tech take a look.
First thing I would do is remove the hard drive, so you can rescue the data if need be.
Then I would remove the battery, and try again from the Mains. If nothing, then there is some real work ahead. Consider this a major failure in that case, and get expert help to take a look.
I doubt there is a quick fix.
Please keep us informed as to what you learn and what helped get your HP G61 back up and running.
You can't buy these any more, and there's nothing on ebay.
Anyone have any ideas or one to sell. please let me know!
My graphics card previously got wet and frankly I don t know enough about computers in order to know what part to order for this How can I find the best graphics card for this system Or more simply can someone tell me what is the best card this system can support Information below Field Value Computer Operating System Windows Home Premium Home Edition OS Service Pack - DirectX DirectX c Computer Name STARFISH User Name Patrick Motherboard CPU Type DualCore system? for Best graphics card this Intel Pentium Best graphics card for this system? D MHz Motherboard Name Unknown Motherboard Chipset Unknown System Memory MB BIOS Type Unknown Communication Port Communications Port COM Multimedia Audio Adapter High Definition Audio Controller NoDB Storage IDE Controller Intel R G ICH Family Ultra ATA Storage Controllers - DF SCSI RAID Controller Intel R ICH R DH SATA RAID Controller Disk Drive ST AS Disk Drive WDC WD AAKX- ERMA Disk Drive Generic USB SD Reader USB Device Disk Drive Generic USB SM Reader USB Device Disk Drive Generic USB CF Reader USB Device Disk Drive Generic USB MS Reader USB Device Optical Drive TSSTcorp CDDVDW SH-S A ATA Device SMART Hard Disks Status Unknown Partitions C NTFS MB MB free Input Keyboard Standard PS Keyboard Mouse HID-compliant mouse Network Network Adapter Belkin Wireless Adapter Network Adapter Intel R PRO PL Network Connection Peripherals Printer Fax Printer Microsoft XPS Document Writer USB Controller Intel R G ICH Family USB Universal Host Controller - C NoDB USB Controller Intel R G ICH Family USB Universal Host Controller - C NoDB nbsp
Look for a model number printed on your motherboard, usually printed around the CPU area.
The info you provided only tells us you are using a Pentium D. Most likely an 820 (could also be either 915 or 920) but not positive. In any case this would be an LGA775 platform, which usually has a PCIe x16 slot. But without knowing the model number of the motherboard so we can check, I'm not going to swear on PCIe x16 support. I am leaning toward PCIe x16 support, since you stated having a graphics card.
I know we had a thread on this in April of last year but what I really want is a poll so I can quickly see the numbers. What I'm trying to see is how many people are running 3 core machines and how many people have 6 core procs. Keep in mind I want to know actually cores, not the number of simultaneous threads you can run. Also, if you're using a multiprocessor machine please add up your cores. Also, if you have a triple core machine but it's not your primary I would appreciate it if you would post so in the thread.
Work related question or just curiosity?
I run 2 cores now in almost everything I physically use. I have a single core system that runs and does stuff for me nearly 24/7, but I almost never sit in front of it.
I have a toshiba satellite C870-11H. It used to ask for the password whenever it went to sleep. I checked and the system is still set to do so.
Some time ago I got fed up with the clowns at Microsoft thinking their latest update was more important than whatever I happened to be doing and destroying the work I was doing so they could load their rubbish. I set the system to ask me before doing an update. Well it doesn't bother to do that and now very rarely it does load an update without authority. Could it be that my system is now way out of date?
Is there a customer focused operating system that I could use instead?
Every OS is customer focused. Microsoft is for non-Mac machines and getting things done. Linux is more powerful but requires more techy-ness to use.
Maybe try Mac OSX.
But there's nothing wrong with Windows. Sounds like you have a decent amount of problems.
Run WIndows update, make sure it's completed every update.
Run CMD.exe in admin mode, run sfc /scannow
Error 0x4001100200001012 attempting to boot from the System Repair CD created on a Dell.
Apparently, this is specific to Dell and their Hack with DataSafe. You can use any System Repair CD generated on some other platform and it will give you access to restore your System Image. Google using that error code and you'll find lots of info. A Windows Install disk will work too.
I have a SR cd from another system and it works just fine :whew:
Don't get caught up a creek w/o a paddle - - if you plan on using a System Image to recover a system,
make sure you have the tools which will allow that image to be restored - - DON'T ASSUME!
background: I'm seeing SMART data that corroborates my laptop HD is degrading and I wanted to prove I could restore when the replacement arrives. As this Dell laptop is a pain to open up, I didn't want to go down in flames due to procedural errors or lack of familiarity. ( I'll never by another Dell )
I use an ADSL modem for accessing Internet in my home. I think my wifi password is stolen. I wanna change it but I have a computer only in my office and use the Internet in my home by my iPhone. Is there a way to change that password with my iPhone or should I surely use a computer to do that work, please?
Hello abbasi ,
You can use your iPhone to log in the router and change the wireless settings, however this isn't usually recommended. If something goes wrong when configuring the wireless settings and you are not able to connect to the router you'll need a device that can be connected via Ethernet cable to restore the access.
If this router is supplied by your ISP you can ask them if they have remote access to it to change the password.
Hope that helps.
I m a tech with years of IT experience PSU. power bad Still or motherboard a won't up Not and I ve built my fair share of computers over the years I have a puzzling one I cannot get to Not a bad motherboard or PSU. Still won't power up the bottom of I m afraid I cannot for the life of me Not a bad motherboard or PSU. Still won't power up get this computer to power on Here is a list of things I ve tried and or eliminated The first thing to happen was quite strange The computer would start when I first got it it was a used system but only after a few presses of the power button I don t ever remember it powering up on the first press of the power button It s an Intel DX BT Extreme Series motherboard with a bit Intel CPU in it GB of RAM FYI the motherboard has a aux power on off switch ON the motherboard itself used for testing at the labs - the manual recommends using the front panel switch however obviously Current state the computer will not turn on at all There are two LED s by the CPU that are for indicating a voltage regulator overheating and the CPU overheating When I hit the power switch the VR Regulator LED blinks quickly once and that is all Ok here goes - Tested PSU came back fine Decided to use that PSU in another system to double check would not boot up in the nd system I replaced the PSU with a good one I know that works of even higher wattage Still doesn t boot up - Tried using onboard power switch same result Tried using the reset switch as a power switch same result so the switches are likely OK I even removed all front panel switch connectors and tried to jumper the two power pins using a flathead screwdriver Still doesn t boot up no power only a solid green light on the mobo when power is plugged in - Reseated all RAM sticks although a system should still POST if a stick is bad as well as CPU same result - Replaced RAM with RAM I know works Same clock speed compatible with this motherboard Again if it s RAM it shouldn t prevent the fans from spinning - Replaced CPU with a good one same socket factor Still no powering up - Removed all other hardware USB cables video card speaker connector drives etc same result - Also replaced the fan with a non-OEM intel fan that has a higher RPM and draws more air - Tried replacing thermal paste on the premise that since the VR reg is showing it s overheating hopefully this would do something - Replaced CMOS battery Same result After testing just about everything I came to the conclusion that it must be a bad motherboard What Yeah a faulty Intel motherboard I ve never heard of such a thing So I RMA ed the board and got the new on in the mail How puzzled was I when the same exact thing happened Words can t describe Solid green light when power cord is plugged in VR light flashes BTW the green light is a V Standby Power Indicator Now in the manaul it states that these lights CPU amp VR LED s will flash when they re indicating a fault not blink once So I tried all the steps again nothing I have replaced every piece of hardware I can think of with good hardware and am still getting the same result - a flashing VR regulator LED Intel has no support for this and the people I ve spoken with at tech support at Intel are stumped My only thought left is a grounding issue which would seem strange to me since the problem gradually got worse that is taking more presses of the power button to power on then eventually no response I am going to switch cases and see if that s the problem If that fails I am out of troubleshooting steps - I ve literally replaced EVERYTHING inside and outside the computer Again to reiterate these are the things that have remained constant in both motherboards original and RMA ed Solid green V Standby Power Indicator Flash of the VR LED when applying power I have replaced every component with the exception of the case and the standouts which I believe have grounding rings on the threads Any ideas nbsp
Speaking of shorts, try pulling the motherboard out of the case. Place it on a non-static, non-conducting surface and leaving in the CPU, heatsink/fan, only hook up the PSU, RAM and graphics card, see if will post.
Hello everyone - I have just assembled a new build It will not power up I need a suggestion to figure out if the problem is the case or the motherboard This is a mini-itx build power-up: power New or Build MB? no supply case's The case is New Build no power-up: case's power supply or MB? Linkworld LC - B This case comes with a volt watt external laptop-style power supply that plugs into the rear of the case just like New Build no power-up: case's power supply or MB? a laptop power supply plugs into a laptop - a barrel connector Inside this power connection connects to a power supply component that is not like a regular ATX power supply but is on a printed-circuit board New Build no power-up: case's power supply or MB? mounted on the case This has several capacitors and other stuff From that comes the -pin and -pin power supply lines for the motherboard I assume the -volt power supply for this external power supply unit is right since it came with the case It was watt The processor is an IBM t with TDP of watts Lower-powered CPUs can be put in a small so I assumed the power supply might be under-powered I ordered a -watt volt power supply with the right size barrel - and same polarity pos inside The MB is an ASRock H MV-ITX It is mini-itx form factor Still same problem Everything is connected correctly When I press the power-on button an external CD drive I have plugged-in spins up for a while But no power light comes on in the front of the case there are no POST beeps the fan for the CPU does not spin up No other signs of life So power is getting into the MB - the external CD drive is plugged into a USB socket in the rear panel of the MB After trying a watt and watt power supply I believe the problem cannot be the power supply cord Can it be that I have too little load I don t think so I plugged in another mm fan and an ol-fashion floppy drive just the power connection to add more load - same thing no power-up no POST nothing but the CD drive will spin up when I open-then-close it yet again So here is the help I need what else can I try -assuming the MB and case are fine is it more likely the case power supply is bad or the MB --Thanks nbsp
Well, I figured out the problem.
I am planning to re-do the older mini-itx system I have; it has gotten riddled with Trojan software for kids downloading games; it basically has been de-commissioned already.
So, I took the pico-psu power supply from that older computer, and hooked it up to the one I am making. Everything went perfectly.
So, I un-did that, removed the MB from case, disconnected the barrel-power connection from the case, unscrewed and removed the power supply that had been mounted in the case, put the pico-psu power supply back in place (I had to drill the hole for the barrel-connection out to be a little bigger since the pico-psu internal/external connection is threaded and held in place by nut with lock washer), and routed wires to be clear of cpu fan, screwed MB to stand-offs, and closed it all up.
now, everything is great. I like this linkworld case, but the power supply is worthless. I may try to get a few dollars back from the ebay vendor, to make me happy with a case that is less than what I should have gotten, but is working for me; I don't want to wait on returns, etc.
I replaced the mobo on my Dell 5510. Purchased from Dell. Sticker on mobo says BIOS ver A05. About every other day I get blue screen and physical dump of memory. My system info says my BIOS ver is A07. How do I go about changing BIOS? Is it as simple as pulling battery for 15 seconds? Some have offered this suggestion but I get a little worried at "friends" advice.
Removing the battery won't change the BIOS version. You need to download the version you require from the Dell site. From Windows you "flash" the BIOS. Take your time preparing for this. If anything goes wrong you will wreck your motherboard.
My new build wont power on all I hear is a few high pitch sounds coming from what I think is the psu.
SSD 128GB SAMSUNG 850 Pro
1TB HDD (from previous build it was working fine 2 days ago)
2TB HDD(from previous build it was working fine 2 days ago)
GPU = GTX 680 2GB (from previous build it was working fine 2 days ago) MSI GTX 970 GAMING 4G GeForce GTX 970 4GB 256-Bit on it's way in the mail.
Case is pretty old and doesnt have a lid but it was working fine with my pervious buid)
PSU = CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply (from previous build it was working fine 2 days ago)
Heatsink = Scythe Ashura Universal Processor Cooler
CPU = Intel Core i7-4790K Haswell Refresh Quad-Core 4.0GHz
Motherboard = MSI Z97-Gaming 7 Intel Z97 Motherboard
Memory = CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory
Please help me
Disconnect everything except the monitor, cpu, ram. In fact, go down to 1 stick of ram. Will it POST now?
24x7 - Low Power Consumption ? Internet Download Machine
I want to build a System that has LOW POWER Consumption.
Mostly Downloading Stuffs , Might Host Own Cloud too , Email Clients , IRC Clients , Other Internet Connected Apps
I was thinking of a Kabini System
Athlon 5350 (25 W TDP) & Some AM1 Mother Board
Again I was thinking about the Intel G3258 Anniversary edition processor (But it has Much Larger TDP)
It should be A Windows 7 Machine . Not Linux or other what nots !
But I am Here for some Advice. I already told you my requirements.
Advise me - What should I do ?
I only want to buy
Processor + Motherboard + RAM
SMPS (PSU) + HDD
I have the rest
Hmm; Why is power consumption a hi priority issue - - are you running off a solar powered system or portable generator?
Hello, and thank you in advance.
I'm building a computer for my Dad, and need help choosing the CPU/motherboard. He will only use it for internet browsing, email, youtube, office etc. No gaming whatsoever.
I'm assuming a CPU with built in graphics is best. I've only built higher end gaming machines, and know very little about integrated graphics.
So my question is, what is the best cpu/motherboard combo that isn't overkill for a simple system like this?
I will assume there are no CPU intensive application. And with the assumption make a statement that there are no PC configurations today that will not suffice for these needs.
Anything with dual cores or more should be fine for these needs. If this wasn't the case, people wouldn't be buying tablets for the same purposes.
A good example of why not to buy cheap power supplies.
This power supply was about 6 months old, Used for 2 or 3 days per week, And drew around 450 watts under full load.
Thankfully the rest of my pc components were spared. It was used in my second older pc, I use a corsair TX850 v2 in my main machine.
Sorry I must not have sent the last post correctly I am new to this site So I will try again I was getting ready to upgrade to bigger hard drive or drives Before doing that I needed to take the old hard drives out to obtain some information off the labels I did so and while they where out I cleaned the Mounting slots a little better than using just No drives to SATA Power hard air Having done that I re-installed them both When I turned on the power button the button lit up and the fans were running But No Power to SATA hard drives it No Power to SATA hard drives does not seem that the hard drives are getting any power as I can t hear or feel any thing Plus the computer is not booting No Power to SATA hard drives I don t recall unplugging anything other than the two hard drives But I also notice that I have a short cable bundle with two white plugs with three pins and one empty pin hole on the other end a black connection with with five connector slots with one middle on blank That makes me think that I unplugged the power to the hard drive someplace along the ling As I have a wire bundle that has two SATA power connectors that are plugged in But their are three white female plugs marked P P and P which are not connected to anything in that wire bundle I don t know at this point if the power comes through that bundle from the power source Of if I do not have the power plugged into the lope I hope that somebody can help me figure this out and let me know if I burnt out the hard drives and have to start over with my recover disk reloading windows and going from there nbsp
How would I close this post out. Dumb me had the monitor plugged into an unused VGA port. It only took me two and a half days to figure that out. I wanted to let others know to check and see if they have everything plugged in where it should be. Including the VGA or other monitor cables.
Hi, I just installed a gigabyte ga-z77x-d3h into my system (i5 3570), and even after reinstalling windows the computer is very glitchy, it takes ages to come on, freezes, and usb devices don't work half the time.
I'm thinking it's a dodgy motherboard. Any ideas?
Actually my first post was wrong, (this is someone else's computer) reinstalling windows fixed the glitches it just pauses on the windows logo for about five minutes before booting up.
I got this desktop computer that has a Asrock board in it Model # FM2A75M-DGS and it comes up with the boot screen and I try to get in to boot settings or anything and it wants a password. I have no clue what the password is and I need help to see if it can be reset. I have looked on the internet everywhere and have had no luck. If I pull the battery will that reset it......help me please. Thanx
Removing the motherboard battery and waiting a couple minutes before replacing it should reset it to where you can gain access again. It should help you. If not then reset your jumper to clear the CMOS. You can get the jumper resetting instruction in the motherboard manual.
I wanted to reset my admin password on my asus ultrabook,
so I took advice from some wanker who told me to remove round battery for 5 min, unplug it from motherboard, plug ac power in without replacing battery yet....... So... THIS WANKER DID!...
Now turning my computer on ive got nothing .... Except a 'battery charging flicker', when releasing power button after holding it a long,long time!!!!! PLEASE HELP ME IM STUMPED, OR SIMPLY THE OWNER OF A PAPER WEIGHT? .... ( I did see a green light briefly when I plugged it in, without the round battery. )
Sounds like this procedure corrupted the motherboards bios, and you may have a "paperweight" now for good. Did you re-install the "round" Bios button battery?
My System Specs
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Manufacturer MSI
System Model MS-7641
System Type x64-based PC
Processor AMD FX(tm)-4170 Quad-Core Processor, 4200 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. V17.10, 10/08/2012
SMBIOS Version 2.6
Hardware Abstraction Layer Version = "6.1.7601.17514"
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 7.98 GB
Available Physical Memory 4.32 GB
Total Virtual Memory 16.0 GB
Available Virtual Memory 11.4 GB
Page File Space 7.98 GB
I would like to get this graphics card http://www.dabs.com/products/asus-g...rage - Graphics, TV Tuners and I/O - Graphics will my system be able to handle this?
While it can handle it, it will be greatly bottlenecked by the CPU. Also, we need to make sure your PSU can handle it, so if you can post your full system specs including the PSU, HDD, motherboard,etc., that would great.
You can probably upgrade the CPU to an 8350 since it uses the same socket. But you may need to apply a BIOS update. BUT, before we get ahead of ourselves, please post full system specs like said above. Thanks.
I have a 9 yr old Desktop PC and my power supply is going out. The one I have is a modular style power supply. Is it required that I replace it with another modular power supply or does it matter?
No, it doesn't matter which one you use. Use whatever type you wish.
I had a completely new experience.
I installed a new R9 280 today.
I have a CORSAIR HX Series HX750 750W 80 PLUS GOLD PSU. ([email protected])
I was running an ATI 6870.
Previously I never heard the PSU. While checking out a game a fan ramped up and I thought it the
R9 280. I thought man that's loud. Through some experimentation I found the R9 280 fan noise was not the problem but the HX 750. I cannot tolerate too much noise from my computer so this PSU has to go.
I know the R9 280 draws more power then the 6870 so the PSU is doing it's job.
My question is: How many watt PSU would I need so it won't ramp up....or are there other considerations I need to focus on as well...besides the +12 rating and wattage.
Thanks for any help
Just get the Rosewill Gold 450w, I think it's on sale.
You won't really find any good passive power supplies.
I bought a gaming PC, and I am wondering if my graphics cards and the computer itself are pulling to many watts, Will the lighting inside the box put a demand on the power supply??? I am debating about taking them out, I don't even have the lights on anyways I find them a waste they came with the computer I bought
I bought a gaming PC, and I am wondering if my graphics cards and the computer itself are pulling to many watts, Will the lighting inside the box put a demand on the power supply??? I am debating about taking them out, I don't even have the lights on anyways I find them a waste they came with the computer I boughtClick to expand...
Josh*^ - the lights could not possibly be pulling more that 10 watts, at an extreme. Probably they are actually pulling a level that you could not notice before-and-after if you used an actual measurement, such as with the Kill-A-Watt.
Same for fans, and most anything else you plug in or on except video cards.
Everyone: you will spend all kinds of money to have powerful components, and a suitable power supply - so go ahead and get an ACTUAL power draw measurement -
The kill-a-watt is simple to use and read, very simple. it costs $20 or $25.
You can use it on anything you plug into a 120 volt outlet. Vacuum cleaner, hair curler, radio, anything. It tells you exactly how much power is being used. Exactly.
For over a decade, these power calculators have been estimating power needs, and they have been over-estimating by 100% the entire time.
Greetings I ve moved to another country where electricity is not stable and goes high low or even disconnect power failure many times a day So i brought an old UPS i have discovery and connected it to the outlet and connected the PC and the LCD screen to it Sometimes when the electricity goes high down the UPS seems can t regulate fast enough or when the electricity disconnect the UPS can t change to battery mode fast enough so the PC restarts I though the problem is from the UPS so i bought failure during My despite restarts UPS PC power a new one iXA PRO which also has a built in AVR with wide input range of - Vac wide range of input frequency output short circuit protection overload protection and the transfer time My PC restarts during power failure despite UPS is ms I connected the PC and the LCD screen My PC restarts during power failure despite UPS to the new UPS and connected my modem and an external hard to the old one Surprisingly when the electricity went high low or when it disconnected the modem did not reset but my PC restarted which means that the old UPS is still working and the problem is from the PC itself I use My PC restarts during power failure despite UPS a very god power supply Blue Storm - wat so any idea what the problem could be Note When the electricity goes high low or disconnect the PC doesn t actually restart it just half turned off i mean i can still hear the fans rolling but there is nothing on the screen and i have to turn it off then on Note Sometimes when electricity goes high low or disconnect the PC keeps working normally Thanx in advance nbsp
My guess is your power supply in your PC uses active PFC (Power Factor Control) while your uninterruptible power supply is likely rated for a passive PFC.
I ve got this legendary socket motherboard DFI LP UT SLI-DR Expert chipset nForce SLI almost new only LanParty - UT using BIOS DFI Del motherboard enter Cannot key Expert SLI-DR NF4 one SATA port is somewhat messed up missing those plastic parts from both sides bought this baby really cheap from well known Romanian e-bay like site okazii ro and I put it on my FX- dual core yeah THAT one and some KINGSTON value memory and tried to boot my rig Here is my problem now this board is Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard working those red diagnostic LEDS start next only one left so no quot LEDs of death quot syndrome for me and the onboard speaker beeps ONCE which I know is always a good thing but I cannot enter BIOS to setup as I need Del key on my PS keyboard is NOT working as it should I press the key and the result is nada nothing first I see the boot logo from Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard DFI after that Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard I see this error message quot CMOS checksum error - defaults loaded press F to continue or Del to enter setup quot and when I press Del I get nothig and when I press F key sometimes I see this message quot Verifying Pool Data and Backup CMOS OK quot and other times I see quot Sil SATA RAID Press Ctrl-S or F to enter RAID utility quot One more thing to add is that I can actually use boot menu selection using Esc key to selct HDD CD-ROM or some other option and this board actually can boot using CD DVD I already tried UBCD rescue CD and some Linux live distros to see if it s not a problem with my FX- processor and I m happy that it is working well is all good no problem here actually I ve seen it s name and working frequency Mhz at POST please help me to solve this problem with my mobo nbsphttp://www.techspot.com/community/topics/cannot-enter-bios-using-del-key-dfi-lanparty-ut-nf4-sli-dr-expert-motherboard.204105/
My sister's 13" MBP (2011) died a few hours ago. According to what she told me, she was using it, and then, poof, black screen and no power. She doesn't have the cash at the moment to have it properly checked by a tech, so I did a basic troubleshoot in an attempt to narrow things down.
While the internals are a bit dirty, I didn't see any obvious signs of physical damage (it was relevant to check for this). Furthermore, the machine doesn't seem to respond to any power sources. I tried a couple different power cables and, while the little amber light on the magsafe (sp?) tab will come on briefly, the computer with neither power on nor display a charge on the built-in charge indicator. I will also note that the machine failed while disconnected from an outlet source with a full battery indicated.
My initial conclusions are a) the computer fried itself or b) the battery is toast. Any suggestions?
If no one here can offer any insight, I would post this to the Apple discussion forum. There are usually people there that can diagnose this from just a description so that is your best bet.
Hi, I have a custom pc, and I am trying to turn of the automatic fan control (so I can use speedfan to control the fan speeds). to do this, I need to enter the BIOS, but I cant.
when I boot, my pc tells me to press DEL to enter bios, and I do, and... nothing
cue 10 , minutes restarting and mashing the hell out of my keyboard. still nothing.
I dont have a fn key to press, its a standard keyboard, no special bios, just the standard asus bootscreen.
What kind of bios you have is it AMI BIOS, AWARD BIOS, PHOENIX BIOS ETC, try pressing f2 button..
I turn-on the power on my laptop and all I see is a cycle of Red, Green, Blue, White, & Black of color on my screen. Computer was working the night before. I do not know much about troubleshooting a computer. Can anyone please give me an advice or guide if this is something I would be able to tinker to work or bring the laptop over for service.
I have a Dell XPS1730 (5 years old) with Nvidia IUPGA5D G84. Recently, upgraded to Windows 7
I appreciate your assistance.
The internal video has died. To verify this you can attach an external monitor and see if the display is normal
So I've got a mostly custom built pc, its motherboard has everything built in(Graphics.etc) but im looking to upgrade to this for graphics:
I have two questions:
1. I have a 500w psu currently, will I have to upgrade, and by how much.
2.how will I take of the built in graphics on the motherboard.
And also, are there any reccomendations for a better psu
Technology:GDDR5 SDRAM, Size:3 GB, Bus Width:384-bit, Effective Clock Speed:6.4 GHz, Width:4.2 cm, Depth:31.1 cm, Package Type:Retail, Height:15 cm, Cables Included:1 x DVI-VGA adapter, Peripheral / Interface Devices:Two 8-pin power connectors, Required Power Supply:750 WClick to expand...
your link clearly states that a 750w PSU is required.
you can use any of these online power supply calculators:
newegg(store) calculator(power supply requirement)
When I power on my Toshiba equium a200-151, the screen lights up but no display at all - even though there is loading activity. I rigged up to my PC monitor and everything is fine - see bios and windows loading etc. Borrowed a spare compatible working screen but same problem. I'm not 100% sure if its the inverter or the ribbon connector - any ideas before I buy a new inverter? Thanks for looking.
I would say that the video cable (ribbon cable) is bad based on what you have tried so far. This cable goes from the motherboard to the LCD display. Did you use the old inverter off the suspect Toshiba when you tried the compatible spare LCD panel?
Hi all. I just bought a graphics card that needs 350 watts and +12v with 20 amps to run. My power supply has to following output:
+5V 22A MAx -12V 1A max
+5V (FP) 2A Max +3.3V 17A max
+12VA 18A max +12VB 18A max
combined power on +12VA and +12VB rails must not exceed 360 watts
Total combined power must not exceed 375 watts
Can it run the card?
Hi, could you please post a little more detail.
Instead of saying graphics card, it would help if you said the actual graphics card.
Instead of power supply, you could say what power supply you have.
Hi there. Since I bought my new mouse and illuminated keyboard, when I use the PC a lot, they have spontaneously been stoping for a period of time and then they work fine. I didn't have this problem before because I had a ps2 keyboard. Now I have USB mouse and keyboard and this happens. I do believe there is a problem with the power management. A friend of mine has the same motherboard and he incurs the same problem. I have a Gigabyte GA-B75M-D3V and here is a printscreen of my bios with the power management tab.
What settings should I change?
I think you'd be able to adjust that power management settings in Windows under
Control Panel>Power Options>Edit Plan Settings>Change Advanced Power Settings>USB Settings
Or in Device Manager>USB Root Hub Properties>Power Management Tab
Is my motherboard compatible with and does it have enough power watts it compatible my Card have power new to & enough with run Is mob Video to run new video card My specs More details about my computer Component Details Processor Intel R Core TM i CPU GHz Memory RAM GB Graphics Intel R HD Graphics Gaming graphics MB Total available graphics memory Primary hard disk GB Free GB Total Windows Home Premium System Manufacturer Gigabyte Technology Co Ltd Model H M-UD H Total amount of system memory GB RAM System type -bit operating system Number Is my mob compatible with new Video Card & have enough power to run it of processor cores Storage Total size of hard disk s GB Disk partition C GB Free GB Total Media drive D CD DVD Graphics Display adapter type NVIDIA GeForce LE Total available graphics memory MB Dedicated graphics memory MB Dedicated system memory MB Shared system memory MB Display adapter driver version Secondary monitor resolution x Primary monitor resolution x DirectX version DirectX Video Card Information Network Realtek RTL D D Family PCI-E Gigabit Ethernet NIC NDIS New Video card info Nvidia G-Force Video Px Video card UPC- Mb PCIExpress X Dual Monitor Support My power supply is watts and on my motherboard now there is only sticks of GB ram Patriot Viper Extreme and nothing else in any of the expansion slots I looked online but cannot get a straight answer Can my motherboard run this card with no issues Thanks I am shine nbsp
No one can say if it will run with no issues, just because there could be any number of complications that could pop up. If you asking will it work with your current system, then yes it will run on your current system with the PSU. I would advise that you uninstall the video drivers (and software) for the current card, changing out to the new card. This will create less of a head ache for you in the end.
I would also suggest trying to find another 2GB ram stick because your motherboard is a Dual Channel motherboard and the computer will run better if you have 4 sticks of ram instead of 3. Its not going to hurt your computer by having 3 sticks of ram versus 4, but you will get better overall performance.
I m officially out of ideas and I m hoping you kind way of operating notebook system No on installing folk here could help me out I have a Hp notebook whose hard disc I formatted while transfering data from it to my computer so I could do a fresh OS When I returned the hard disc into the notebook I found No way of installing operating system on notebook that I could not install Windows by any medium I tried plugging in an external DVD reader and installing windows like I did the first time on this notebook but No way of installing operating system on notebook it would not read from the device BIOS recognises it only as USB LEGACY SUPPORT When I tried installing windows from an USB like I did many times on my computer the screen would freeze when I pressed any key to No way of installing operating system on notebook boot from USB I tried changing USB ports for the devices I used it did not help and I tried changing USB memory sticks from which I booted but alas no success I don t know if there is a way of transfering the files from the dvd onto the hard disc make it bootable somehow and then install the OS on the hard drive the same one I also tried installing other OS using the same methods Windows and XP but have had the same problems P S I haven t tried preinstalling a system on the hard drive on another computer and then inserting the HD into the notebook hoping it would boot I tried that once on a comuter and have had no success Please do help cheers nbsp
Does this help ?
or this ?
Ok guys. I am planning to build a system(of course a PC)and I really wanth to know is it worth it, I want to hear your oppinions.
CPU-AMD Athlon X4 760K
MB-MSI A88XM E35
GPU-MSI R7 260X
RAM-Corsair Vengeance 8GB DDR3 1600Mhz
HDD-500GB WD Caviar Blue
Case-I am still thinking about it, maybe Cooler Master K280
I am curious are these parts all compatible and can I run Battlefield 3 on ultra with this?
Ok guys. I am planning to build a system(of course a PC)and I really wanth to know is it worth it, I want to hear your oppinions.
CPU-AMD Athlon X4 760K
MB-MSI A88XM E35
GPU-MSI R7 260X
RAM-Corsair Vengeance 8GB DDR3 1600Mhz
HDD-500GB WD Caviar Blue
Case-I am still thinking about it, maybe Cooler Master K280
I am curious are these parts all compatible and can I run Battlefield 3 on ultra with this?
Thanks guys. Click to expand...
Well you will not get a smooth 60 FPS on Ultra in BF3 with this system. So I would say no you cannot run it on ultra since at the 1080p realm the card averages above 30FPS on ultra.
If you want a system to run BF3/4 on ultra, might we here your budget so we could help you pick out a better parts list?
I have put together a new build with the Gigabyte Assassin 2 m/board and a Corsair AX 860i PSU. On start up the PSU clicks out and won't run. The PSU Self test is good - green light and the fan is running, however when I connect all the peripherals the PSU just drops out and will not run. I have double checked all connections from the CPU, M/board, memory, graphics cards. This is all in a Thermaltake Level 10 case, my next check will be the hard drive connections - hot swap bays. Any help will be really appreciated.
Hey guys I had some contractors doing some work on my house today and they needed to shut the circuit off to the room my computer was in The computer was on at the time so it shut off when the power was cut Now it won t go back on Power button does nothing at all and I don t know if it s the power supply mobo or switch I ve got a power supply tester which causes my computers fans to start up when it s plugged in so the power supply does respond not Power mobo button working... issue? The results are in the attached file It shows LL which means to low to register voltage for the - V line I honestly don t know if I even have that line so I don t know if that s bad I attached the label on my power supply too Would Power button not working... mobo issue? no voltage cause a computer to completely not respond Because the fans DO start up when the power supply tester is plugged in I don t think the switch is the problem because I tried to short the power switch jumpers with a paper clip and nothing happened I also took the CMOS battery out for a while and then tried it again and that didn t work Any ideas on whether I need a mobo or a power supply I don t have an extra PSU around to test with but I may try to find one before ordering a new mobo thanks in advance -mike nbsp
Not the switch. Could be the motherboard or PSU, but I don't have any good insight.
I would unplug the PSU and flip the 120/240V switch to 240V, then flip it back before plugging it in. To me, this doesn't make any logical sense, but over about 16 years of playing with PCs I have seen it work twice.
I bought a Samsung 840 SSD (120GB) for my gigabyte GA-770T-USB3 motherboard. I am unable to install win 7 64bit on it. It is a SATA SSD.
I have tried ACHD mode in the BIOS, I have tried IDE mode. The drive works as I have tested it as an external drive on other computers.
I bought the drive specifically to be used as a primary drive.
My regular hard drives work fine on the motherboard.
Well, first of all, your motherboard only supports 3GB/s and the 840 is a 6GB/s drive. Just by that you won't really get your moneys worth. And how so are you unable to install? Also can you please list your system specs?
My brother in law has a got himself a free computer to which I am going to donate my old Sapphire X1950GT graphics card. The problem is, is that I can't easily wire it in to the computer as it has a crappy generic PSU with only one Molex and several Sata power plugs.
What I do have, without slicing and dicing and getting out the soldering iron, is the adaptor cable below. What I don't know is whether this has a sufficient amount of wires I.e. 0V and 12V to provide power to my G/Card.
System power consumption with a Sapphire X1950 GT is less than 250W. I think you will be fine with the splitter mentioned above. You probably don't need much extra power to run the card. I assume there is at least a 300W PSU or greater in the system.
Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.
I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.
Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.
I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.Click to expand...
By any chance could you post a picture of your computer as it is hooked up right now so we can see if your missing anything. Try to check if the 4pin/8pin connector on the motherboard is hooked up and check for tightness of all the Motherboard connectors to start with.
Hi im planning to maximuize my fans in my case Phantom But im not sure if My power Supply could Handle it Right now It Running on Phanton Case top MM fans rear mm fans and front mm fans Raidmax RX- K W ATX Power Supply ASRock GM-VGS FX AM w Radeon AMD FX- GHz Quad-Core Processor AMD Stock AM AM w Case Fan GB Supply Power x GB DDR MHz GB SATA Hard Drive DVDROM DVD Reader Power Supply Drive External USB Wireless N Adapter SAPPHIRE R GB DDR WITH BOOST Required watt My system is running fine now even if I put the fans controler into max speed but now im planning to maximize my fans in my case here is the fans status for my case Side x x mm included rpm Front x x mm included rpm Top x x mm included rpm Rear x x mm included rpm Bottom x mm HDD Pivot x mm Question Can my PSU handle everything for my system im also planning to upgrade my ram to gb or What is the Power Supply recommended for my system Or when im planning to upgrade my motherboard what would fit well with my system looking for slot ram or if my watt power supply strong enough to power thermaltake dual frio heatsink Thx you very much for trying to help nbsphttp://www.techspot.com/community/topics/power-supply.199652/
Hello all I made a post regarding the performance failing of one of my supply power affect hard performance? drive/computer Faulty hard drives The conclusion we came to has unfortunately not resolved my problem and I am beginning to think my Power Supply may be the culprit Faulty power supply affect hard drive/computer performance? ------------------------------------------------------------------------------------------------------ Before I go into details here is my current Hardware Q GHZ GIGABYTE EP -DS R GB PC mhz x gb x gb Nvidia GTX mb requires x pin power adapters Asus Xonar soundcard requires floppy power adapters Windows x Jeantech W PSU modular PSU PCI-E nodes and nodes for other devices gb HDD operating system tb HDD data tb HDD data tb HDD data - added recently ------------------------------------------------------------------------------------------------------ My original problem in brief Upon accessing certain files in one of my TB drives I hear a distictive quot click lockup halt quot sound and then the entire system crashes first the drive will become inaccessible then windows explorer will crash followed by the mouse and eventually a BSOD after a minute ------------------------------------------------------------------------------------------------------ I bought a new TB a month ago to replace what then I thought was a failing TB drive Since the problems have become quot random quot and happen across all four drives tb tb gb tb I am now considering my PSU the culprit Jeantech Absolute w It seems logical to me Sometimes while performing tasks which put stress on several HDD s at the same time my computer is quot choking quot running as fast smooth as it should but with sudden freezes with those HDD quot click - stop - restart quot sounds Booting into windows is failing from time to time freezes on the quot starting windows quot screen or DISK BOOT FAILURE Insert system disk The PSU is modular - could certain quot plugs quot in my PSU are faulty I haven t tested this extensively but in some cases when the computer is not starting up at all using different power ribbon cable combinations seems to help Also I had to remove my DVD drive completely when I first installed the new TB I bought and I don t think my computer will start at all with it plugged in anymore so my PSU MUST be having a hard time coping with all the components If it is of any relevance I use an Nvidia GTX which requires x PCI-E pin power connections hard drives power is supplied via THREE modular ribbon power cables - two HDD s share power from the same ribbon cable lastly worth noting I use an asus Xonar sound card requires floppy power connector several symptoms suggest the PSU any thoughts nbsp
a 1000Watt shouldn't have any problem coping with the components that you have, i would recommend that u borrow a power supply from a friend and try it out on your computer, maybe the power supply is old and is not supplying proper voltages on all the rails....
Hey I just bought a new
video card http://www.newegg.com/Product/Product.aspx?Item=N82E16814130680
I did not replace my HDD and the are 3GB not 6 GB as this board supports but are SATA and I have nothing special starting up beside the basic items and AVG 2013 and magic ISO which I had all this on my old system. I am running windows 7 and it takes this machine almost 5 min to boot up it just sits at the windows display screen. I never overclocked anything but I thought this upgrade would be faster than my 4 year old system that this replaced, not slower! OK so any ideas? Would the 6GB SATA HDD drive make that much of a difference?
6GB HDD? Dude what, that's ancient.
Get a new HDD, or a cheap SSD - you'll really see it fly.
Hi can anyone help please, I just received my new Plait GTX Nvidia 770 Jetstream card and noticed it came with an 8pin and 6pin power requirement. They provided a 6pin to 8 pin adapter and I have a Corsair 650 TX PSU with 2 6pin power lines problem is the 6 to 8 pin adapter looks like it need both 6pin lines from the PSU to provide the necessary voltage/amps and that still seems to leave me short the other 6 pin port on the GFX card. Do I need to plug both 6 pin attachments in to the adapter or will one suffice?
My bad, silly fool that I am I failed to realize both 6pin PSU power lines also have additionally the other 2pin lines required to make up the 8pin connection right along side. Thought I may need a newer PSU there! LoL
I gave my external hard drive to a friend but his laptop didn't recognize it. after getting it back, I connected it to my laptop but it didn't show up in disk management at all. the drive is receiving power since the light is on. I felt the drive upon connecting to laptop and noticed it tries multiple times to rotate the magnetic disk but in the end it come to a stop and nothing after that. I think my friend's laptop somehow damaged my drive since I'm sure it's a hardware problem.
So, I was wondering maybe any of you guys have an idea how to fix it if possible otherwise, I'd like to know if I can recover the data without spending for the experts?
Hey armmzd. Sure sounds like a drive gone bad, and assuming you know it was good when you gave it to him,maybe it was dropped,etc. All I can suggest is going to the drive manufacturer's site and see if they have a drive diagnostic tool you can try.
Hi guys I ve spent today building a pc for myself However on pressing the on button there s no reaction at all My machine specs are M B - Gigabyte GA- A-UD Processor - AMD RAM - Corsair Gb DDR Case - Zalman Z Graphics card - Gigabyte HD PSU - Corsair CX M W Wi-fi card also installed but can t remember the name and seem to have temporarily lost the box in a pile of packaging So far I ve checked the CPU and motherboard power sockets the wall plug sockets and the power cord to my PSU I ve also checked the connections between my case and the motherboard and these all appear to be correct on power build PC doesn't As part of this final point I switched the power on LED with the power button they both originate from the same location so thought they may be mixed up Anyhows I got a solid LED which suggests to me that a there s power running through the switch circuit and b the pc isn t booting when told to as a PC build doesn't power on solid LED would indicate PC build doesn't power on circuit completion which would be the equivalent of holding in the on button If anybody could shed any light on where to go next I d be eternally grateful currently searching the house for a paperclip to test the PSU nbsp
Does the CPU and case fans move at all, when pressing the power button?
I have a printer
There is no lighting up
The power supply give
red wire about 7 V
blue wire about 11 V
Holding down the power button en stop/reset won't work
How can I test the logic board is defect?
Image logig board
Its my first turned power Supply Flashback when LED is flashing on build and I think my motherboard isnt working but more specifically I want to know why the flashback led is flashing when I turn on the power supply Power is going into the motherboard the standby light comes on as well as the Flashback LED but when I attempt to turn the computer on with the power button Flashback LED is flashing when power Supply turned on on the case nothing happens I ensured both the ATX power connectors were fully in everything is connected RAM is in but the computer will not boot Also I might have have connected the power to the case in at the opposite ends ground to power and power to ground but it has been reversed and if that is the problem would I have to replace the case or the motherboard Here are the specs -ASUS M A motherboard -Fractal R ATX Tower Case -AMD FX- core AM GHz -Kingston GB in SSD -Corsair TX -Kingston gb HyperX DDR Ram nbsp
No idea but slight suggestion Power supply???
Hye. I juz wnt to ask some short question.
Does my Amd Athlon X2 5600+ 2.9Ghz overclock bottleneck wif my HD4850 IceQ 4 gpu??
How much the performance increase if I upgrade my current cpu to Amd Athlon II X2 270??
If you are going to upgrade and your system supports it, you might as well try to get a 4 core. Especially on an AMD rig, where CPU performance is weaker than Intel core for core. The "AMD Athlon II X4 650" is about the weakest performance I would recommend to anyone. It is comparable to the Core i3-2100 which is as low as I recommend for Intel CPU's.
For generalized performance you can take a look at these benchmarks. - http://www.cpubenchmark.net/
Athlon 64 X2 Dual Core 5600+ - 1463
Athlon II X2 270 - 1988
Athlon II X4 650 - 3663
Core i3-2100 - 3603
I got this laptop, neo, 1 1/2 year in my possession, it so happened that I accidentally hybernate I for a couple of hours, when I tried to open it, the there is no booting taking place., no fan,just the led light for charging/power , I have tried the hard reset as suggested in other forum, but the charging light just blinking as I press the power button( connected with the adaptor and w/o the the battery)
is there any one know my case?
Remove the battery altogether; then hit the POWER key, which will drain any power left onboard.
Now reinstall the battery and connect to the A/C charger - - does it show as charging?
Wait a few minutes and then hit power on again - - it should resume from hibernation.
My mom gave me a Dell Dimension 4700 computer that was acting up. She said it would turn it's self off randomly and she thought it was a virus. When I brought the computer to my place, it powered on once, then I went to turn it on again and nothing. No lights, no power what so ever. So after doing some research I bought a new power supply for it. I just replaced the power supply and plugged the computer in and now there is a blinking amber light in the front and a solid green light on the motherboard but it won't turn on. I have checked all of the connections and they are properly seated. Any ideas what is causing the problem?
My iphone 4S can not support whole day use as the battery nearly drain .
So I searched iphone 4S external battery in amazon and find Plush cartoon toys power banks AD below. The price is 29.99$ a little expensive as its 5200mAh. T
http://amazon.com/Constellations-Thunderbolt-Incredible-Blackberry-Fashionable/dp/B00DJ3DZK2 (avoild link, delet url space when past in IE)
Also I found a external battery case here :
The battery capacity is only 1700mAh but can be used as a case protector for iphone 4s
Which one I should bought or
do anyone find the similar high capacity like 10000mAh but cheaper one in ebay buy.com or amazon and other place?
Before you invest in more equipment, try to reduce power consumption (see this)
I have 2 gb kingston SD memory card, which is password locked, now I forgot the password, how to unlock it? Plz help me in this regards.
Go for Unistal port locker
My father is having issues with his computer and shut down The computer turns on and runs fine It shut downs successfully as far as I can tell Fans stop spinning power LED turns off but then starts itself about or seconds later POST beeps are one short then about a second later a somewhat longer beep at a different tone deeper if I remember correctly I then get a quot Power Surge Detected possible faulty PSU quot warning The computer continues to boot to windows properly if I allow it I haven t tried holding the power button when windows is running I don t want to either but all other attempts to shut down from windows lead to the same end result I can shut down from BIOS Shut Down and Power Supply by pressing the power button and the system does not restart itself I m not sure where to look There have been no problems with the computer during usual use It runs fine I don t see any signs of a PSU issue although I m not terribly experienced there Temps are between and degrees C OS and drivers are fully updated I m not entirely certain if BIOS is fully updated or not Any ideas on what the issue could be Do I need to look into a new power supply I m going to try replacing the CX M with the Silencer MkII W from my gaming computer Power Supply and Shut Down this weekend to see if that resolves the issues Specs Intel i - Stock cooler Asus P Z -V LK Rosewill Line Glow Only of the blue LED fans are installed WD Caviar Blue GB Crucial Ballistix GB Asus Blu-Ray CDD Corsair watt CX M Running Windows nbsp
A faulty PSU can cause serious damage to other components. My first advice is do not start this PC up again especially in light of the warnings you are receiving. If you know of anyone who has a multimeter to test this psu it please have them do so.
Corsair is known for their quality power supplies but even they can ship out faulty ones. Let us know how the switching of the psu works.
I have a Windows 7 computer wired into my home network. It has a printer attached to it that I have set to share. I have a windows 7 laptop and an XP laptop. Both 7 machines can see open the shared drives on the XP machine but when I try to access the shared drives of either 7 machine from any of the other machines I am asked to give a User ID and a password. This is a private Home network. I have no passwords set up on any of the machines. I'm trying to set up the printer on the two laptops and I can't access it without the User ID Password window popping up. Does anyone know what the problem is?
This is all normal operation for print/file sharing. If you really want sharing without using passwords (imo a security risk), then you need to google for "anonymous sharing"
My apologies if this in the wrong area, it seemed right at the time.. My problem is, brand ned build roughly a week old.. When I hit the power switch nothing happens, I have to reach around and flip the PSU switch on and on again, then hit the power button and it starts up just fine. A friend mentioned it could be a short, or a grounding pen somewhere interfering. But as I've never seen a problem like this, I can't diagnosis it on my own.
Case: Cooler Master 932 HAF
Mobo: Sabertooth Z77
PSU: Corsair HX850
Hey Mogymog. Does this happen every time you turn on the pc or is it an intermittent but frequent problem?. I assume you already checked the power switch wiring to the mobo for a secure connection.
Hello, im looking to build my own home surveillance system to act as a DVR with cameras. im looking to build it inside a normal midtower computer case. but I want all the cameras to be hooked directly to the computer and have a few terabytes of storage. some lists of ideas and/or builds you would like to share would be ideal.
Have you contacted NSA?
Ignore my stu-pid attempt at humor, I couldn't resist with all the NSA news going around. I'm sure someone with actual experience will join in.
Hi guys my name is karan . I just build my pc a couple of months back and while I'm playing a heavy game on it always restarts and show this error I dont know what to do pls guys help me my pc specs are -
amd fx 4100 3.6 ghz
asus m5a78l-m-lx v2 motherboard
amd radeon hd 6670 2 gb ddr3
iball 400 watt psu (got free with my iball cabinet) , pls guys help me
SURGE is normally associated with an increase in line voltage and that can be deadly to the PS and other components.
A DROP-OUT is when A/C voltage goes below minimum and this can effect the system too.
If power is poorly regulated (ie it fluctuates periodically), I would get a UPS to condition the power better. I have two: one for the computer equipment and another for my large LED tv.
You can get a cheap multi-meter to measure and monitor the voltage visually and then when you get the error, glance to confirm - - is it hi or low?
Personally, with only 400w PSU and your gaming environment, I would suspect you are stressing the PSU to its limit when gaming.
Hello. I want to find out why Windows does this cheking to my Memory Card. It happened while booting. After "Checking file system on D:
The type of the file system is FAT32." and other stuffs like: "Unrecoverable error in folder \System Volume Information\catalog.wci.", or "\Sounds\FosterThePeople-PumpedUpKicks(ButchClancyRMX).mp3 first allocation unit is not valid. The entry will be truncated." and "Cross link resolved by copying.
\Images\IMG00502-20121218-1525.jpg is cross-linked on allocation unit 6984." After this proces Windows started normaly. I've cheked my documents on the card and found out that some images were damaged and some old music appeared, but only samples, from about 18 seconds to 56. I foud, also, a "BOOTEX.LOG" file, written in Notepad. Could you explain what happened, please? &sorry if there are some bad spelled words.
It perhaps got removed incorrectly while some programs still had the file data open/in memory. I'd pull everything off the card, format it, and put the data back.
What is the card in? Does it have to be FAT32? Could you use ExFAT instead?
I have a Gateway, model ID49C. I bought it new about 3 years ago but replaced its battery less than a year ago.
This phenomenon has been happening for more than a year: When I plug in my computer to charge, sometimes the front power light (orange when charging) and the light for the power button start flashing in unison and the computer stops receiving charge. It immediately stops when I unplug the computer. This only seems to happen when the computer is open -- I can still fully charge it overnight. Lately it's started to happen so often that my computer can barely charge at all from the number of times I have to unplug it.
Does anyone know what's going on, or where I could look to find more info? Thanks for your help!
Try another AC adapter...
I have a Dell Dimension 5100 Desktop computer that the power supply recently went on so I replaced it and now the computer is not recognizing the CD/DVD drives?
When I first installed it and powered the computer on it said I had a Floppy Diskette Seek Failure . I don't have any floppy drives installed so I disabled it through the BIOS and now I noticed the drives aren't working . I have two drives installed one to play dvds and burn cds and the other is a dvd burner . Both of the drives power up and you can hear the disk spinning but nothing happens and the computer doest show I have them?
The old PSU may have taken out the motherboard when it fried - fairly common, especially with the cheap O.E.M. units used by Dell. Also, some Dell boards are proprietary, which means the connectors may not be standard ATX - Check the pinout on the 24 pin ATX connector to make sure it matches on both PSUs.
Has anybody got a serviceable Power Lead which connects mains adaptor model ac-v315 to base of Sony CCD-TR3300E Hi8 Camcorder and which is no longer required. No longer available from Sony.
I m looking to buy computers to be used for Adobe Premiere Pro Budget needs to be kept in mind as we don t have limitless money Currently have two specs suggested by our supplier what are peoples thoughts Spec CPU Intel Pentium Premiere Spec Pro For Adobe System G Cores Threads GHz RAM X GB DDR SSD GB Kingston System Spec For Adobe Premiere Pro SSD GPU Sapphire AMD Radeon HD GB Spec CPU Intel Core i - Cores Threads Ghz RAM X GB DDR SSD GB Kingston SSD GPU Sapphire AMD Radeon HD GB The main thing I m interested in is the CPU and GPU is the i worth it over the Pentium about a price difference per computer Is the Graphics Card good enough It is not on the recommended list by Adobe for Premiere Pro will that be an issue Should we pick another that is recommend Intel Pentium G http ark intel com products Intel-Pentium-Processor-G - M-Cache- -GHz Intel Core i - http ark intel System Spec For Adobe Premiere Pro com products Intel-Core-i - -Processor- M-Cache-up-to- -GHz nbsp
What is your budget for each computer? Because both PCs will struggle greatly in Premier Pro.
Hi, I'm thinking about upgrading from 2 Crossfired 7970's to Quad 7970s, I'm currently running a XFX 1050w Power supply so I know I will have to upgrade to a bigger one, So I'm just wondering what size to go on the psu to safety run them all and the rest of my rig. Thanks alot!
this is an average power consumption of a radeon 7970
u have to take count not only the graphics cards here though all ur system specs should be listed down if possible and if ur running an overclock it would help better
but judgeing by the cards it would add up already to a 1300w alone
+ might I ask what u need quad 7970s for I feel like 2 is enough overkill already
Hi I don't know if this is the right place to post this, but I couldn't find another place to right about my issue, I have the same laptop, and I have the weirdest problem!
My screen turns on but I can't install any OS, I have tried Ubuntu, windows 8, windows xp.... for example for windows 8 it shows a logo and then a blank screen, for Ubuntu I can't even boot from CD!
I have tried CD, usb drive
I have ran PC-CHECK, and it says no problem!
I have taken out the hd, and dvd drive to just boot from CD, and still nothing!
I have also updated the bios to the latest version from acer's website, this is so frustrating please help me
your help is appreciated in advance
What is the make and model of your laptop? Have you changed anything in your Bios other then updating to the latest version? Did you update to the latest version of the bios before or after you started having problems?
Some how my Enter Key has started to mute and unmute the master volume.
Doesn't mater when I press the button. While playing a game or even using excel, every time I press enter volume mutes and the when I press enter again it unmutes.
I use Windows 7 ultimate bit64
The Enter key normally does not regulate volume control on most computers. What is the system model of your computer?
Thanks and regards,
For easy access to drivers, manuals and product updates, please visit our Support Site
Okay to start things off my laptop is an ASUS N61J series model and it's been with me for about 3-4 years now.
The problem is that one day when I plugged my laptop to the charger the power just won't go in to my laptop. The charger is working fine and I was able to use my laptop via battery life.
I got it repaired at a local laptop repair center and they said that the BIOS IC (what they particularly said at the work performed is "Reseal/Reset BIOS IC").
So my question is what excatly happened to my laptop? Like:
1) What caused this problem
2) How did the shop excatly fix the problem just in case it happens again I would know what to do
Thanks in advance!
I think they're referring to the BIOS integrated controller. This controls basic functions of your laptop, outside of Windows.
From the description, it sounds like they opened up your laptop and 'reset the BIOS' - that is, remove the small button battery out of it, to force it to reset.
I don't know how that would help you charger problems.
Hi Friends ... I have this laptop that has been given to me by my company and the USB ports have been blocked in manner such that I can copy stuff from my USB drive on to the machine but cannot copy in the reverse direction, ie. from the hard drive to the USB. Obviously it is to safeguard against theft of data. However, I do not deal with any confidential data and like to back up things every few days. Please tell me a shortcut to unlock my USB entirely even though I do not have administrator rights on the machine.
Sorry, we will not assist in circumventing such security features, especially when the machine belongs to someone else.