Windows Support Forum

X1 Carbon 2016 (20FB) display doesn't work after ...

Q: X1 Carbon 2016 (20FB) display doesn't work after ...

Hi all, I have the X1 Carbon 2016 (20FB) and it is running Windows 10 Enterprise. I have all the lastest Windows and Lenovo updates. It all works pretty well except when it comes to starting back from sleep mode. I have the laptop configured to go to sleep when I close the lid. However when I reopen the lid, the power button and keyboard lights come on but the display stays off. Opening and closing the several times doesn't help. The only way to get the display to turn on is to quickly press the power button. This puts the laptop to sleep. If I press the power button again the laptop comes back to life and the display works again. Anyone else have this issue? Any possible solutions? Thanks,Ian

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-20FB-display-doesn-t-work-after-opening-the-lid/td-p/3454282
Relevancy 100%
Preferred Solution: X1 Carbon 2016 (20FB) display doesn't work after ...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 19.35%

Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened I finish tower Power will not work button My the pc and My tower Power button will not work when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F PANEL cords u know the pwr switch and all that jazz turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading P S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds nbsp

A:My tower Power button will not work

You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
 

http://www.techspot.com/community/topics/my-tower-power-button-will-not-work.203422/
Relevancy 19.35%

I recently bought a Windows DVD to put it on the new PC I'm building for my mom. That PC has troubles with the DVD drive itself (stupid motherboard doesn't have IDE..), so I figured I'd set up a bootable USB to install Windows before the adapter arrives. Problem is, the installation DVD isn't playing on my drive (I tried another DVD with a movie on it before, so I don't think its my drive). I brought it to a PC shop and for them it worked fine, even though its quite scratched on the back (I guess the person selling those DVDs doesn't know how to ship them properly) I didn't wanna pay 20 bucks for them copying the DVD, even though I'll probably end up having to do that.

Any ideas what the problem is, or what I can do? I'm not sure if the DVD will work in my moms drive either..
 

http://www.techspot.com/community/topics/dvd-works-with-other-drives-but-not-mine-while-other-dvds-work.216661/
Relevancy 18.92%

I have an Aspire one NAV50 with Windows 7 starter.

One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.

I've tried the ff on my laptop:

restart
update
scan the laptop with MalwareBytes
Fn+f2
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
 

A:Laptop would work on ethernet cable not on Wireless Connections

I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
 

http://www.techspot.com/community/topics/laptop-would-work-on-ethernet-cable-not-on-wireless-connections.201158/
Relevancy 19.35%

hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp

A:My internet will only work through ethernet cable not wireless

There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.

Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.

Did you install anything on your PC before this happened? Did Windows install any updates?

Try disabling your AntiVirus. That may be the issue. I doubt it though.

Tell me if any of these solutions help.
 

http://www.techspot.com/community/topics/my-internet-will-only-work-through-ethernet-cable-not-wireless.197067/
Relevancy 18.92%

Hey guys,

I have a Sony Vaio VPCEH15EN laptop & the OS is Windows 7 home basic. I have a wifi router which is of TPLINK.

The wifi won't connect to my laptop but it works fine on my mobile..it would only start working when I use the ethernet cable. I never had this problem before. I have tried everything ..I also tried the winsockfix.bat but all my efforts have gone in vain..I just don't know if the wifi router is faulty or the modem of my ISP...Please help me solve this problem.

Best Regards,
Om
 

A:Wifi on my laptop won't work but works when I use the ethernet cable

I have solved the problem by myself. To do this, first you have to disconnect your Ethernet cable from your laptop and follow the steps: Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the Wi-Fi networks. Click on the available network and select connect. After a while, you will be asked to give a password for your Wi-Fi connection. Type the password and click on connect button. And now will be connected to your Wi-Fi network via wireless.

May be it will help you.
Regards
MD. MAHMUDUL HASAN
 

http://www.techspot.com/community/topics/wifi-on-my-laptop-wont-work-but-works-when-i-use-the-ethernet-cable.200754/
Relevancy 18.92%

Hi! I don't know much about this place but there's a problem with my laptop and I don't know how to solve it. My laptop won't connect to the wifi anymore but it works perfectly fine with the ethernet cable. I appreciate it very much if you tech geniuses could help me out. THANK YOU!
 

A:My WiFi on my laptop won't work but works with Ethernet cable

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/my-wifi-on-my-laptop-wont-work-but-works-with-ethernet-cable.206652/
Relevancy 39.99%

Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

http://www.techspot.com/community/topics/internet-only-working-when-connected-using-ethernet-cable-wifi-doesnt-work.197081/
Relevancy 19.78%

Hey guys... I just got a new EVGA GTX650 ti boost superclocked. I just put it in and I was not getting any signal to my monitor. I tried VGA, HDMI and DVI. Nothing worked and when I took it out to try booting with my integrated graphics, I didn't get any signal to my monitor. All of my connections and wires are connected properly, my power supply is the right voltage and has enough power to support my graphics card. My hard drives are spinning but I cant access my BIOS. I have tried everything that is common. I know my graphics card is not defective and im thinking that it might be my motherboard. Any suggestions?
 

A:My integrated graphics won't work

You were using integrated graphics before the discrete card? It's strange that your onboard isn't working if it was before hand. Usually it's just a overlooked cable or something plugged in the wrong place. Did you make any changes to BIOS? Some boards require you to change the primary display adapter to PCIE or onboard. Maybe a BIOS reset will help the situation. I doubt there is any issues with the MOBO itself. I suggest stripping the build down to nothing but the bear essential components for operation. This way you can isolate the issue a lot easier.
 

http://www.techspot.com/community/topics/my-integrated-graphics-wont-work.194322/
Relevancy 21.07%

My Friend has a HP Pavilion DV2000 Laptop. His display isn't work. Suddenly display gone. But I thought it could be Display problem not a VGA. So, i tried to connect an external monitor and used Shortcut keys to change the display. I pressed fu + F1 or Fu + F2 or Fu + F3 or Fu + F4 up-to F12. But no result.
I couldn't check whether it's a Display or VGA card problem. IS there any other way to check it. in addition to these is there any other combination keys to Change the display to an external monitor. I'm unable to check whether i get login or not. if I can login then i can use Windows Key + P. Then i can select mode. But I'm Unable to anything here. Please help me to find the problem and i have to take it to repairing shop.
Thanks in Advanced
 

A:Change display of laptop to external monitor

It should be the Fn + the key that shows a monitor symbol. If it still doesn't display, the motherboard video processor has failed, and not the LCD Panel
 

http://www.techspot.com/community/topics/change-display-of-laptop-to-external-monitor.168817/
Relevancy 22.36%

Hi every one
I need your help gays
I saved some files in my USB but when I explore my USB the files are not appear
it shows that usb is empty
I do not know what to do
thanks
 

A:USB drive doesn't show my files

Have you tried the same USB on a different pc? If not, do so.
 

http://www.techspot.com/community/topics/usb-drive-doesnt-show-my-files.187106/
Relevancy 21.07%

Hello,

I have been using the same set up for just over a year now and yesterday my monitor (which is just a TV with a HDMI port) stopped receiving signal.

I can boot up the pc and get the BIOS, which I can go into and see everything fine, as well as the windows loading icon but when it would normally go to the log in screen I get nothing.

I can however plug in an extra monitor (an actual Samsung monitor) with a VGA cable and it all works fine and on top of that if I connect the TV at the same time it works perfectly fine as a second monitor.

However if I try to turn off the VGA monitor and just use the HDMI TV then I get no video signal again.

No idea how to get my main TV monitor working again. Totally stumped.

OS: Windows 8.1
Processor: Intel Core i5-4570 CPU @ 3.20GHz
RAM: 8.00GB
Video Card: GeForce GT 620
MOBO: Asus Ranger VII
PSU: Corsair 500w
Monitor: Technika 22" HDMI + Samsung SyncMaster 2032 VGA
 

http://www.techspot.com/community/topics/monitor-no-video-found-when-main-display.215571/
Relevancy 20.64%

Infinity displays are all the rage among notebook buyers these days. Dell's XPS 13 (2015) was an excellent example of what's possible when it launched earlier this year and now, they're bringing the gorgeous screen to its bigger brother. ...

Read more
 

A:Dell's revised XPS 15 includes gorgeous Infinity display, Windows 10

What's an Infinity screen?... Short answers please, I'm not interested enough to Google it.
 

http://www.techspot.com/community/topics/dells-revised-xps-15-includes-gorgeous-infinity-display-windows-10.213699/
Relevancy 21.93%

In dxdiag option and in Display option all 3 acceleration options are not available in my pc. But I had installed the drivers and hardware for graphics then too it showing not available. Can anybody tell me how can I enable all those 3 options. I have Standard VGA Graphics Adaper.
Here is screenshot for reference -

 

A:Display Drivers Not Available

And Only Because Of That I am not able to open any game or sofware which requires display graphics. Any suggestions are most welcomed.
 

http://www.techspot.com/community/topics/display-drivers-not-available.214649/
Relevancy 19.78%

I am considering purchasing a MSI ATX DDR3 2133 Motherboard 970 for my new computer build, and heard from somewhere that it is not compatable with windows 7? Is this true?
 

A:Will my mobo work?

Where did you hear that? It will run Windows 7 just fine.
 

http://www.techspot.com/community/topics/will-my-mobo-work.214529/
Relevancy 31.39%

According to the latest reports, AMD will skip the problematic 20nm manufacturing node for their next-generation 'Arctic Islands' GPUs, which the company is expected to launch in 2016. Instead, Arctic Islands will progress directly to 14nm FinFET in the hope...

Read more
 

A:AMD to reportedly skip 20nm entirely for its 2016 GPU family

Sounds like a good strategy.
 

http://www.techspot.com/community/topics/amd-to-reportedly-skip-20nm-entirely-for-its-2016-gpu-family.212286/
Relevancy 21.07%

Up until this point, Asus has been solely focused on producing G-Sync monitors for the gamers out there with Nvidia graphics cards. However this is set to change, with the company preparing to release their first FreeSync monitor, the MG279Q. ...

Read more
 

A:Asus joins the FreeSync market with 1440p, 144 Hz IPS display

Finally a good IPS monitor. I got tired of seeing so many TN ones.
 

http://www.techspot.com/community/topics/asus-joins-the-freesync-market-with-1440p-144-hz-ips-display.211255/
Relevancy 21.5%

I have uploaded a video of my laptop to better show the problem:

I am thinking something is wrong with a connection or some cable just don't know which. Never fixed a laptop. I broke the panel before I figured out the screws were hidden behind tiny black covers. Also broke the metallic part of the screen on the right side but I guess I will crazy glue it somehow. My most important issue is the flickering.

If anyone knows how to fix this issue please let me know I would really appreciate it.

At certain position the screen doesn't flicker, mostly if it's set back at a greater than 90 degree angle.
 

A:Laptop display flickers

It's sensible to check the connectors to the screen but unless you find a video of how to get inside your particular laptop and study it you are highly likely to break other pieces too. I worked out how to take mine apart thanks to Google but although I was careful I still broke a connector. Putting that right took me ages.
 

http://www.techspot.com/community/topics/laptop-display-flickers.213067/
Relevancy 21.93%

Hi all,

My friend's USB flash memory has data (its drive shows that there is data in it) but when I double click on it to open it and see the contents, it doesn't show any folders and files! I did the following works:

1- I scanned it by my updated kaspersky AV. but no threat found
2- Scanned by windows defender tool. same result!
3- scanned by malwarebytes anti-malware. same.
4- cmd (run as administrator) -> go to its drive (e.g., H:, when H is my flash drive) and typing the attarib -s -h *.* /s /d command. It could not to show the data.

All my attempts faced failure till now.

Can anyone help me please?
 

A:USB flash memory has data but doesn't show the contents

Salam
Go to cmd (run as administrator) -> go to its drive (e.g. H: where H is my flash drive) and type the attrib -s -h *.* /s /d
Now flash will show the data.
Your attrib spelling was wrong correct them
Try it.
 

http://www.techspot.com/community/topics/usb-flash-memory-has-data-but-doesnt-show-the-contents.193421/
Relevancy 30.96%

AMD's roadmap for the next two years has leaked, and it's filled with information about what the company is planning for their desktop and mobile CPU and APU lines. While 2015 will see a mix of 32, 28 and 20nm chips,...

Read more
 

A:Leaked AMD roadmap suggests all 2016 APUs will be 14nm

If it beats the Bulldozer family by a solid 5-10% in video games plus media encoding with reasonable prices, I am going to use it for all my builds.
 

http://www.techspot.com/community/topics/leaked-amd-roadmap-suggests-all-2016-apus-will-be-14nm.212540/
Relevancy 19.35%

As I don't go menu and Monitor's won't buttons the work away am writing this I have this blue square on the screen with all the settings for this monitor Whichever button I press on the monitor the menu won t go away Not even the power button works so that means I can Monitor's menu won't go away and the buttons don't work t disable Monitor's menu won't go away and the buttons don't work the monitor Unplugging and plugging it back in doesn t work as soon as the picture appears the menu appears Monitor's menu won't go away and the buttons don't work as well Let me give you a bit of a history as it might help determine the cause About a month ago my old monitor monitor started behaving weird It started turning itself off every now and again Sometimes few times a minute Every time it turns off it turns back on with the splash screen saying quot BENQ quot and everything I had no idea why it does that I tried pressing the buttons on it to go into the menu but every button seemed to shut it off and every button seemed to turn it on So I gave it to a family friend to try and fix it He said that the quot control board quot started dying and that he doesn t have a spare one or something like that He then gave me a spare monitor of his monitor until I can buy a new one or fix monitor So I took monitor from him and sent monitor to the shop so they can try and fix it About a week passes and the shop calls and says that they fixed monitor I go and pick it up and when I came home I unplug monitor and plug in monitor monitor was working perfectly then Monitor worked for about minutes and started shutting down again And when I tried using the buttons they wouldn t work again Same thing as last time So I return it to the shop and tell them that it doesn t work That was about a week and a half ago They still didn t fix it The problem is now the monitor also started having problems It doesn t turn off yet but the menu buttons don t work Power button doesn t work Nothing And on top of that the menu won t disappear from the screen As I am typing this there s a menu on top of everything Every now and again the menu will switch to a different option like quot brightness quot quot auto adjustment quot and such like the buttons are being pressed Now I am wondering could it be that my PC is quot breaking quot these monitors Is there a way for a PC to physically damage a monitor What should I do in that case Also I should say that ever since monitor died and after I installed monitor my PC has been getting blue screens of death It hasn t happened once in years since I got this PC and it started after I got monitor I don t know if that s something that s important but there it is If you need more info please let me know I am trying to figure out what is happening and every bit of help is appreciated Thank you nbsp

A:Monitor's menu won't go away and the buttons don't work

No one has any relevant information?
 

http://www.techspot.com/community/topics/monitors-menu-wont-go-away-and-the-buttons-dont-work.212651/
Relevancy 21.5%

Hello,

I need some professional help.
My computer:
AMD a10
4fb RAM
R9270x BY XFX
....
NOW, without the graphics card the computer runs fine. When I install the ddriver's for the r9 it will work, but eventually the display driver stopped working makes its way back.

I've ran all diagnostics on the memory and checked temperstures which all turned out to be fine.

I sent the card into xfx and they returned it saying it's fine.

WTF DO I DO MATES. I think it's the card....but that's just me.
 

http://www.techspot.com/community/topics/amd-and-display-driver-issue.212301/
Relevancy 21.93%

I could use some advice. My second monitor just died, and I would like to find a replacement with a few specific features.

27 inch
Adjustable White Point
As low as possible wattage

As I understand it, having a white point that is adjustable separately from brightness and temperature controls provides a better way to dim the white without dimming other colors. If I am not understanding this right, please correct me. The reason for looking into this is because of my eyes being sensitive to light. If I could, I would replace all white that comes through my monitor with a light tan. That's how bad it is. So, if there is a way I can better adjust how bright the white is, I'll probably take it.

The low power I want for reduced heat. With two screens this size, heat is obviously a problem. So far, I have only found that reducing wattage will have a noticeable decrease in heat. If there is something else, feel free to clue me in.

Thanks all!
 

http://www.techspot.com/community/topics/choosing-appropriate-display.212194/
Relevancy 18.49%

I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
 

http://www.techspot.com/community/topics/gateway-ne56r-wifi-doesnt-work-at-home-after-windows-8-1-update.212135/
Relevancy 18.92%

Neither my keyboard or mouse are working on any of the 7 USB ports on my computer. My mouse was initially working, but I read somewhere if you delete the keyboard drivers you can reinstall them and it will work again. BUT when I was doing that I stupidly uninstalled my mouse driver so now NOTHING works. I can't try if it works in safe mode because my keyboard doesn't respond when I hit f12 during boot up.

When I plug in the mouse or keyboard, I get a window that pops up asking if I want to install the hardware, but it's impossible for me to do anything because my mouse and keyboard don't work! If anyone has any ideas I would greatly appreciate the help. Thanks!
 

A:My Dell Demension e510's (Window's XP) keyboard and mouse don't work

First I would try to find a different working keyboard because you should at less be able to boot into safe mode because the drivers don't even load until windows start loading.
 

http://www.techspot.com/community/topics/my-dell-demension-e510s-windows-xp-keyboard-and-mouse-dont-work.211116/
Relevancy 21.07%

hello techspot, I keep getting this error when I play games in my computre. what should I do to fix this error?
 

A:Display driver stopped responding and has recovered

I get this error every once and a while. Updating your GPU drivers usually solves the issue. Do you know what GPU you are running? Post your full system specs below and then we can go from there.
 

http://www.techspot.com/community/topics/display-driver-stopped-responding-and-has-recovered.204745/
Relevancy 20.64%

Acer announced two new gaming-grade 27-inch monitors at the Consumer Electronics Show last month. The XB270HU garnered the most media attention thanks to its IPS panel and Nvidia G-Sync technology. What Acer neglected to mention at the time, however, was...

Read more
 

A:Acer's 27-inch XG270HU display will ship with FreeSync support

Those bezels are awesome! I wonder how much it'll go for though...
 

http://www.techspot.com/community/topics/acers-27-inch-xg270hu-display-will-ship-with-freesync-support.208917/
Relevancy 22.79%

I built my desktop in Sept These are the specs Motherboard Intel BOXDH CLB LGA Intel H HDMI SATA Gb s USB ATX Intel recognized doesn't HDD get Motherboard Power Supply RAIDMAX HYBRID RX- SS W ATX V V EPS V SLI Ready CrossFire Ready Modular Power Supply New HDD doesn't get recognized Version with Build-in LED Fan On Off Switch Graphics Card GIGABYTE GV-N - HDD doesn't get recognized GI GeForce GT Fermi GB -Bit DDR PCI Express x HDD doesn't get recognized HDCP Ready Video Card CPU Intel Core i - Sandy Bridge Quad-Core GHz GHz Turbo Boost LGA W Desktop Processor Intel HD Graphics BX I Last night Feb th I was peacefully watching tv on it I shut it down before I slept Next morning I wake up and turn it on And my baby doesn t turn on She won t respond to my fingers Fans aren t spinning like nothing So what did I do -I opened her up I saw the green light on the mobo was on This gave me a hint that PSU is Okay -Checked if everything was connected even though I haven t moved the computer anywhere lately so I don t imagine anything to get loose Seemed all good -Then I wanted to test the PSU I unplugged the PSU from Mobo the pin connector Only top fan was connected to the PSU Then I carefully performed the paper clip test The top fan ran Woo This makes me thing that PSU is still okay -So I connected it to the rear fan component on the mobo I did not connect the pin connector So at this point I still have the paper clip in the PSU plug I did the test again Only the top fan ran Rear fan did not run Top fan is directly connected to the PSU Rear fan is connected through the mobo -Now I am not sure if the rear fan is supposed to run if the connector aren t connected If the rear fan should run regardless if the pin connected as long as PSU is directly supplying to the rear fan component on the mobo then I would say that my mobo is bad If I need the pin connector to run the rear fan along with the direct connection from the PSU to the component then I would say my PSU is not giving enough power -So I went on got a PSU from best buy with same watts to see if it turns on It did Therefore my old PSU wasn t producing enough energy However now my HDD is not being recognized The BIOS says no Hard Disk recognized All my SATA cable is connected to my PSU I feel my SATA cable that connects HDD to mobo is bad -I connected PSU directly to HDD and still not luck I did this to find out if the connector that comes out of HDD had problems which I think it doesn t Less probable -This is why I think my SATA cable from HDD to mobo is bad as it s not giving good connection I hope my HDD didnt go bad I am trying to see if I can find anyone to check if my HDD will work on their desky -Any Suggestions nbsp

A:HDD doesn't get recognized

A SATA cables are cheap, go get one and try that.
 

http://www.techspot.com/community/topics/hdd-doesnt-get-recognized.208757/
Relevancy 18.49%

My PC with windows 7 is the only computer with issues in the house. Ethernet works perfectly but wifi doesn't even when I don't have the ethernet hooked up. The wifi says it is connected but browsers, steam, and Itunes don't work. I have Bitdefender A/V and already tried uninstalling it, no change. I also uninstalled steam and Itunes with still no change. I even uninstalled and reinstalled the drivers for the wireless adapter. I tried looking and I don't recall downloading or installing anything around the time the problem started. Before I try replacing the adapter itself, I was hoping for help here since I saw a very similar problem in another thread.
 

A:Internet connects but doesnt work on wifi, ethernet works fine

Bump
If there is any more info I can give to help you help me, please let me know.
 

http://www.techspot.com/community/topics/internet-connects-but-doesnt-work-on-wifi-ethernet-works-fine.199827/
Relevancy 18.92%

Hey!
I have an Acer that spontaneously decided I no longer needed to play games. Everything else works perfectly fine. It's been doing this for the past few weeks and I've done all that I can. I'm no tech wizard by any means and I need some help. Pretty much it'll open to the load screen for a few moments then disappear back to my home screen. Any ideas on what it could be and what I can do?

These are the specs:
Acer Aspire V5 Touch with Windows 8.1
Aspire V5-V561PG-9683
Model number: Z5WV2

If you need more info let me know, I still have everything for it.
 

A:Acer Aspire issues; Games no longer work

If you are talking about the games that are loaded by a app. You will need to uninstall the app. Then reinstall the app. I have no ideal why this happens . But I have seen it more then once.
 

http://www.techspot.com/community/topics/acer-aspire-issues-games-no-longer-work.208471/
Relevancy 35.69%

When I connect my carbbon mobile sometime it connects to wifi sometimes not
 

http://www.techspot.com/community/topics/carbon-mobile.208143/
Relevancy 19.35%

Can I run 1600mhz ram on a mb which is supported 1333mhz (my config MSI-760gm P21-FX 1gb asus amd radeon 5450 gfx card And 4gb rm of 600mhz.
 

A:Can 1600mhz ddr3 ram will work on mb which is supported at 1333mhz?

1600 MHz RAM should down-clock to 1333MHz just fine, but I will not make guaranties. It usually works perfect, but there is always the possibility of incompatibilities.

The GPU memory and frequency is independent and irrelevant for this topic.
 

http://www.techspot.com/community/topics/can-1600mhz-ddr3-ram-will-work-on-mb-which-is-supported-at-1333mhz.207921/
Relevancy 21.5%

I came home one day to find that my monitor was no longer displaying my PC via HDMI. After a lot of testing, I've found that the monitor works with other PCs via HDMI, and my PC works with other monitors via HDMI, but they don't work together. All I get is a black screen. I know that my PC's resolution is set to one that my monitor can display. I've tried several different cables. I have absolutely no idea what the issue might be, and I'm pretty much at my wit's end here. Any ideas?
 

A:Strangest display problem I've ever had

Have you tried different projection modes? Windows will remember set profiles for specific monitors. It is possible the the projection mode was turned off for the monitor, and will stay that way until the mode is changed.

For Windows 7 press "Windows Key + P" to bring up the projection menu.
 

http://www.techspot.com/community/topics/strangest-display-problem-ive-ever-had.207904/
Relevancy 19.35%

I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.

Any suggestions?
 

http://www.techspot.com/community/topics/i-hear-windows-startup-but-after-that-nothing-headphones-work-though.207890/
Relevancy 19.78%

Hi,

I installed win 7 x86 on a sony vaio vpceb36fg. Everything seems OK but the Fn keys. The combination of Fn+related keys work only for sound volume and screen lock button and not for others!

How to get all Fn keys worked please?
Is it needed to install any tool/utility?
 

A:Fn keys don't work

Your laptop came with Windows 7 Home Premium 64 bit so I'm curious as to why you decided to install a 32 bit version.

Laptops, particularly Vaios, have specific functions assigned to keys. On yours you were previously able to surf the web and play DVDs without booting up into Windows. To regain all that you've lost will take quite a bit of work. The utilities you need will be on a Sony support site. However, sometimes things have to be installed in a particular order before they work. It took me a long time Googling, downloading utilities and experimenting to get everything working when I reinstalled the OS on my Vaio.
 

http://www.techspot.com/community/topics/fn-keys-dont-work.207842/
Relevancy 21.5%

Hello,

I remote into my home PC from work using the Chrome Remote Desktop tool. It works well. The problem is the screen resolution. The monitor I use at work isn't the same as the one on my home PC. This causes the resolution to be a little blurry and images to be slightly small.

When I disabled my monitor completely at home, the resolution was clear and it worked well. I just unplugged the monitor from my PC. Is there a way to completely disable a monitors input without having to physically disconnect it from the PC? I've tried disabling it in the Device Manager and that didn't do the trick. Any suggestions?

Thanks,

Speck
 

A:Disable Display when remoted into a PC

HMM; every hacker would just love such a solution. Don't think this should be pursued.
 

http://www.techspot.com/community/topics/disable-display-when-remoted-into-a-pc.207501/
Relevancy 19.78%

Before I say anything else, I am very new to building a computer. Ive never built one in my life. I am curious if the setup I have to far will work! I am trying to look for pretty cheap but good options for parts. So far I have a case, processor, and GPU in mind. I need ideas for the motherboard especially. I dont know how to tell if everything would work correctly, so if something would be incompatible, could you tell me?

So far I have

GPU: Nvidia GTX 760
CPU: Intel Core i7-3770k
Case: NZXT Phantom 240 Mid Tower
Ram:
Motherboard:
Hard-Drive: Seagate Barracuda 2TB HDD
Power Supply:
DVD Drive:
Operating System: Windows 7 64 Bit
Monitor:

Would there be anything else I need? Also what is thermal compound and Heatsink? Are these required for my setup? Please tell me if there is anything wrong with this so far and what items I should use for the unfilled spaces! Thank you all so much!
 

http://www.techspot.com/community/topics/will-this-setup-work.207722/
Relevancy 22.79%

Over multiple devices on the network wifi works including this laptop I m running on However any time I try to use ethernet including on this laptop there is no internet connection The error when troubleshooting is Wi-Fi Works, Ethernet Doesn't Dns server not responding While on ethernet connection Wi-Fi Works, Ethernet Doesn't I can access the networked printer but cannot access the default gateway so connection is going from room to the modem and through I have tried restarting the wifi lan modem which then connects to another router down stairs which I haven t restarted my dad won t let me I have tried flushing dns uninstalling and re installing the adapter starting in safe mode with networking This is my ipconfig all while on wifi Windows IP Configuration Host Name Rob-Laptop Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List BigPond Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - - - - - B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Connection-specific DNS Suffix BigPond Description Mediatek MT E bgn Wi-Fi Adapter Physical Address B - - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c d f d a Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday December PM Lease Expires Friday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Ethernet Media State Media disconnected Connection-specific DNS Suffix BigPond Description Realtek PCIe GBE Family Controller Physical Address -A - - -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d d e fbb a Preferred Link-local IPv Address fe e fbb a Preferred Default Gateway DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - NetBIOS over Tcpip Disabled Tunnel adapter isatap BigPond Media State Media disconnected Connection-specific DNS Suffix BigPond Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here it is on Ethernet Windows IP Configuration Host Name Rob-Laptop Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List BigPond Wireless LAN adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft Wi-Fi Direct Virtual Adapter Physical Address B - - - - - B DHCP Enabled Yes Autoconfiguration Enabled Yes Wireless LAN adapter Wi-Fi Media State Media disconnected Connection-specific DNS Suffix BigPond Description Mediatek MT E bgn Wi-Fi Adapter Physical Address B - - - - - DHCP Enabled Yes Autoconfiguration Enabled Yes Ethernet adapter Ethernet Connection-specific DNS Suffix BigPond Description Realtek PCIe GBE Family Controller Physical Address -A - - -C - DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe b c dc Preferred IPv Address Preferred Subnet Mask Lease Obtained Thursday December PM Lease Expires Friday December PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - B- - D-A - -A - - -C - DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BigPond Media State Media disconnected Connection-specific DNS Suffix BigPond Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Any help you could give would be mu... Read more

http://www.techspot.com/community/topics/wi-fi-works-ethernet-doesnt.207715/
Relevancy 21.93%

Getting rid of emi on screen when using vga input?
 

http://www.techspot.com/community/topics/vga-display.207510/
Relevancy 19.78%

I have a toshiba laptop right at a year of having it, it will not allow me to get internet connection even though it shows its getting wifi or set up through the router.. Is this a virus or other issue
 

A:Toshiba Internet won't work

Moving this topic to appropriate forum.
 

http://www.techspot.com/community/topics/toshiba-internet-wont-work.207422/
Relevancy 41.28%

Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.

I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.

I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.

Does anyone knows how I get back my wireless connection? Pleasee
 

A:WiFi doesn't work only with cable ethernet

Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
 

http://www.techspot.com/community/topics/wifi-doesnt-work-only-with-cable-ethernet.207136/
Relevancy 19.35%

Hi all I have to the WLAN work as rather Router on from a WiFi LAN a a typical situation in my Internet and LAN setup My ISP provides me with a direct LAN cable that I need to connect either into my PC or into the WiFi Router WLAN port I also have a LAN that I need to connect to so I have installed a separate LAN card for the internal LAN purposes My two setups are below with their issues I hope someone can suggest a middle grounds to have a LAN and a WiFi too Scenario The ISP cable goes into the WLAN port of the Router Cables from the router goes into my PC network card and to other PCs for LAN purposes The PC cards are all configured to automatic IP LAN Internet WiFi is now available This works fine for a few days and then the internet stops working because there is a conflict of IP The ISP expects IPs like xxx and the one on the LAN Router for my PC is Scenario Router to work as a WiFi on the LAN rather from a WLAN The ISP cable goes into network card internet sharing is enabled Router to work as a WiFi on the LAN rather from a WLAN and automatic IP with the ISP s expected IP xxx Another cable goes from my PC s network card fixed IP into the regular LAN port of the same Router Without any issues over the months the Internet works the LAN works other PCs have fixed IPs too etc but no Wifi Can I have best of both the worlds in such a situation I can t install a rd network card for sure as the slot on the mother board is limited Please advise Thanks in advance Bhavbhuti nbsp

A:Router to work as a WiFi on the LAN rather from a WLAN

Code:

Scenario-1
isp==>(wan)router-->PC card-1, et al (conflict 123.237,234.xxx v 192.168.1.100)

Scenario-2
ISP===->pc card-1
pc card-2==>router
scenario-1 is a configuration or firmware condition
scenario-2 is a real security issue and the primary PC is basically acting as a DMZ server and is at risk.
Here's my setup:
Code:

isp==(wan)router-1--- PCs in the same room
|
+---(lan)router-2(with wifi) - - - wifi connections in the den

configuration to make this work with full file/print sharing:
router-2:

disable DHCP in this router
setup all WiFi settings here
notice: router-2 wan slot is left empty to make this work
Router-1:

set LAN address of router one as you please (eg: 192.168.1.1 )

set an address reservation for router-2's MAC -> a fixed, constant IP address on that same subnet (eg 192.168.1.254)
set the DHCP range small (eg 2-32)
router-1 will control all auto-ip assignments for both routers.

Personally, I add another tweak;

reserve ip addresses for all of my devices into the low-end of the dhcp range (say 2-10) and
let 'guests' take addresses above 10
This gives the opportunity to allow file/print sharing to known systems (2-10) and disallow for the guests.

Setup totally within the routers allow my laptop to travel and not be effected by these choices.
 

http://www.techspot.com/community/topics/router-to-work-as-a-wifi-on-the-lan-rather-from-a-wlan.207258/
Relevancy 21.5%

I run two displays. When I got up this morning, one of them is on but black. When trying to adjust my display settings, it comes on briefly (maybe 3 seconds) and goes right back off again.

System specs are as follows:

Operating System
Windows 7 Home Premium 64-bit SP1
CPU
AMD Athlon II X2 255 45 C
Regor 45nm Technology
RAM
4.00GB Dual-Channel DDR3 @ 535MHz (7-7-7-20)
Motherboard
eMachines EL1352 (CPU 1) 49 C
Graphics
VE205 ([email protected])
VE205 ([email protected])
256MB NVIDIA GeForce 6150SE nForce 430 (Acer Incorporated [ALI])
Storage
465GB Western Digital WDC WD50 00AAKS-22V1A SCSI Disk Device (SATA) 48 C
Optical Drives
ATAPI DVD A DH16ABSH SCSI CdRom Device
Audio
USB Audio Device

Using Sabrent USB-DH88 USB Display Adapter also

I have checked all drivers and windows shows they are up to date. Both displays were fine as of about 1 AM this morning, and to my knowledge no updates or downloads were done during this time.

Any help would be appreciated; I work from home and having dual monitors is almost critical.
 

A:2nd display black screen

Try changing cables first, by some chance the cable has gone bad.

Sounds like it could be a lighting issue within the monitor. If it is a backlight issue, the monitor will still be displaying an image. You will not be able to see the image without some kind of lighting. If you can use a flashlight to expose the image, you would at least know it is a backlighting issue. I've been able to use this technique on phones as well as monitors.
 

http://www.techspot.com/community/topics/2nd-display-black-screen.207214/
Relevancy 21.5%

I have been looking around and cant find a cut and dry answer to my problem.

What I'm looking to do I set up 6 monitors on 2 gtx 980's. My question is if its possible to have 3 monitors running in landscape as well as 3d and the other 3 as separate workspaces. Or can you only get 3 total monitors to work with nvidia 3d. And it gets more complicated when SLI comes into the picture since I would like to maximize my cards. But correct me if I'm wrong, SLI essentially turns my 2 cards into 1 not allowing me to utalize all the video ports on the 2nd card. Meaning I won't even be able to accommodate 6 monitors? I may just have to do without SLI.

So again. 3 monitors in surround 3d. 3 monitors not inside the 3d or surround environment. Off of 2 Gtx 980's. Possible? If not is there a way to accomplish this with other hardware.

Thanks for your time. SF
 

http://www.techspot.com/community/topics/6-monitor-display-without-sacrificing-3d.207179/
Relevancy 19.35%

Well I am accessing my remote router via and it works access work via phone, Remote PC doesnt via ok when I am using my Phone s Remote access ok via phone, doesnt work via PC browser chrome or IE on Samsung however when I am at computer at work I cant access my router I ran Tracert and I am getting up to hoops and th says quot Request timed out quot lt ms lt ms ms lt ms lt ms lt ms lt ms lt ms lt ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms Remote access ok via phone, doesnt work via PC ms ms ms border ge - unitedair- chg pnap net ms ms ms core te - -bbnet chg pnap net ms ms ms ae - chi ip gtt net ms ms ms xe- - - chi ip gtt net ms ms ms c-eth- - - -pe ecermak il ibone comcast ms ms ms he- - - - -cr ecermak il ibone comcast ms ms ms ms ms ms te- - - - -sur mortongrove il chicago com net ms ms ms te- - -cdn mortongrove il chicago comcas t Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Trace complete Anyone would know why it works on the phone and doesnt really go through all the way to the end nbsp

A:Remote access ok via phone, doesnt work via PC

Ok I have to ask first when you are using your phone is it always using mobile data or do you connect it at work via wifi? When reason that makes sense to me is at your work they maybe blocking the remote port. I guess it all depends on what you are using also. If you are just using standard RDP then they might be blocking port 3389. If you could give further information on how you are connecting remotely whether using software such as teamviewer or just standard RDP. Also how do you have your router configured. I can better understand witht is information thanks....
 

http://www.techspot.com/community/topics/remote-access-ok-via-phone-doesnt-work-via-pc.206550/
Relevancy 19.78%

Hey guys

I have a problem with my laptop.
Sometimes the space bar, n and enter key stops working. When this happens, I can usually hit the button a few times and the key finally registers. It happens randomly and quite often. But sometimes I can type for hours without it happening.

I have not spilled any liquid on my laptop and I haven't dropped it. The problem started randomly a few months ago.
Does anyone know what could be causing this?

The laptop is an Asus K55V. It is nearly 3 years old

- Fred
 

A:Laptop keys sometimes don't work

Hey Fred,
Not sure if this might work that well, but give it a try! If it doesn't..go to a technician...its probably the best idea.

Shut down the laptop, removed battery and cable for a moment, press and hold the start button for 60 seconds... and replace the battery.. start the lap top.

Hope this helps!
 

http://www.techspot.com/community/topics/laptop-keys-sometimes-dont-work.205954/
Relevancy 41.71%

What the title says. I bought a TP-Link WDR4300 and installed it, and everything works perfectly on every device except for my laptop (Windows 8.1 Lenovo G480, running Windows Defender as AV). When connecting wirelessly, I get access to the router, but it shows "limited", and it doesn't even let me get into the setup page (192.168.0.1) and when I ping it, every packet is lost. Ethernet, meanwhile, works perfectly. I'd appreciate any suggestions on how to fix it.

I'd like to attach the ipconfig outputs but my command prompt is in spanish and some of the characters are missing in the .txt file, too. I don't know how to get the file in english.

@jobeard I saw one thread you solved in which you said to mention you so you could help. I'd really appreciate it. Thanks beforehand for any and all suggestions.
 

A:WiFi doesn't work, Ethernet does

Hi, You will always have to use the ethernet (Cat 5) cable to get into your router's software, at 192.168.0.1, all routers are set up like that for security reasons.
It's done that way so that no one can change your settings, passwords etc using a wireless connection, you must use the Cat 5 cable to make setup & security changes.
Did you get any setup software with the TP Link router?
If you get good internet access using Windows 8.1 using the ethernet cable, it
might point to possible wireless driver issues.
It might be worth downloading the latest driver for your WDR4300 from the TP-link website;
http://www.tp-link.es/support/download/?model=TL-WDR4300&version=V1
 

http://www.techspot.com/community/topics/wifi-doesnt-work-ethernet-does.205530/
Relevancy 22.79%

Hello everyone Been having some crazy stuff going on with this new PC that I just built I cannot get it to startup at first try I just get a black screen and the BIOS welcome try always doesn't first second/third at (but does try) up PC boot at doesn t show up and neither does the windows startup loading of course When I manually restart it Power Button long press it runs just fine I have read that thousands of things could be potentially causing this from Hard Drive to Power Supply to graphics card but my actual bet is on RAM voltages overclock causing it since I recently overclocked it via BIOS setting the default frequency at mhz which is what my RAM offers at maximum and the max that my Motherboard can read The actual voltage is set to auto via BIOS which stays at V so I m not sure if lowering or raising it will solve the problem XMP is disabled not sure if that s relevant My BIOS is up to date My graphics card is old I m planning to change it soon but I didn t have any problem in the past with it Hard drive is also old but runs just fine I m open for any suggestions Specs - Tacens Mars Gaming W power supply - AMD FX- Eight-Core - PC doesn't boot up at first try (but always does at second/third try) MSI Gaming Motherboard http thepcenthusiast com msi- PC doesn't boot up at first try (but always does at second/third try) -gaming-am -motherboa - XFX ATI Radeon HD GB DDR - G Skill Ripjaws X DDR PC - GB CL x modules of GB Dual channel in slots amp - Hard Drive SATA II WD EADS- M B TB - Win - bit Some screenshots CPU-Z confirms I m running at mhz MSI Command Center does not get accurate frequency readings Thanks in advance for all the help If I forgot to mention something please tell me nbsp

A:PC doesn't boot up at first try (but always does at second/third try)

Check and make sure the wire cables are connected properly and not loose. Also, can replace CMOS battery and see you may able to access your computer.

P.S. Also check that the hard drive connection is set to UEFI under BIOS connection settings. Windows 8/8.1 supports only secure booting.

Good luck though!!
 

http://www.techspot.com/community/topics/pc-doesnt-boot-up-at-first-try-but-always-does-at-second-third-try.205119/
Relevancy 19.35%

My internet wont work, ive tried using both crome and IE but both browsers say that I am not connected to the internet despite the fact my computer says that I am connected to the internet. I know its not a network problem because my other devices are connecting fine. Also I tried connecting to the wifi at home and at school and it still does not work. My laptop is a HP ProBook 6390b and I am using windows 7. This problem started occurring after about 4 months disuse of my laptop which I think might be a factor as to why its not working. I have run windows updater and run a scan with my antivirus but still nothing helps. Thank you for any assistance in advance.
 

A:Internet wont work on laptop

Have you kept up and installed all the Windows 7 updates and are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/internet-wont-work-on-laptop.204944/
Relevancy 19.78%

I got a hp 6371it

link --> (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02054227&tmp_track_link=ot_faqs/top_issues/it_i...

I have this problem: I bought a kingston Dimm ValueRam 4GB DDR3 1333MHz Non-ECC CL9 (it is compatible with my mb according to hp website). I installed it on my pc and:
1) if I install just that ram it works fine
2) if I install that ram I bought and one ore both ram I had already installed in my pc it doens't work or it blocks on hp main screen or it appears the classic blue screen of hardware error and it never enter on windows (it asks for a system reinstallation)
what is the problem? should I do something else? I tried mounting rams in different slots, I tried everything

please help!!
 

A:Compatible ram don't work

Sound as though the ram you bought is not compatible with the existing ram. Is the ram you bought the same specs as the old ram?
 

http://www.techspot.com/community/topics/compatible-ram-dont-work.205230/
Relevancy 15.05%

About a week ago, our cable internet connection went out. Before I had a chance to reboot the modem & router, my 11 year old decided to completely reset the router to factory settings! Ugh! This caused several issues: my home network is now gone, only a unsecured factory network is available. When I try to plug my laptop into the router via ethernet cord (in order to login to router and setup secure network) my computer will not recognize the router and won't connect to internet. I tried troubleshooting with my cable provider and they say it's in my computer (IP address will not reset) and he recommended I replace my network card. However, today when I brought my laptop to work, it will instantly recognize the wifi at work. So is it really my network card that is causing issues? Please help, I'm desperate and not tech too tech savvy!

Details:
Linksys wireless router
Charter cable modem
Hp pavillion dv6 laptop with Windows Vista OS
 

A:Laptop won't connect to home wifi but will connect to work wifi

Did you figure this out?
 

http://www.techspot.com/community/topics/laptop-wont-connect-to-home-wifi-but-will-connect-to-work-wifi.204978/
Relevancy 18.92%

Hi can any one help I cant hear any sound on my laptop its all turned up but when I conect it to my tv the volumes fine but soon as I disconnet from the tv the sound ont go.
 

A:Audio wont work on asus x53u laptop

Did you fix this?
 

http://www.techspot.com/community/topics/audio-wont-work-on-asus-x53u-laptop.204577/
Relevancy 22.36%

Bought the following brand new at Best Buy on and trying to get setup Lenovo K e desktop tower keyboard and mouse LG MP HQ monitor MS Office key code Webroot internet security disc After connecting everything according to the instruction of both the Lenovo and LG instructions double amp triple checking all parts accounted for and connected properly here s what happened Lenovo tower up turn Monitor tower, hooked on doesn't to but boots up fine disc drive in tower opens and closes properly Lenovo keyboard and mouse both detected Great so far except LG monitor does not turn on at all In the back of the monitor two things are connected blue HDMI connector with pins on both sides is connected to HDMI connection in back of tower AC DC adapter plugged into electrical outlet and other end directly into monitor Everything works when power booted up except monitor shows no life - no light indicator and black screen Monitor hooked up to tower, but doesn't turn on Monitor just doesn t turn on at all There are driver discs for both lenovo win and the LG monitor and like I said I can insert them into the tower and close but nothing happens on the monitor display Best Buy said it should be no issue using the LG monitor with the Lenovo PC tower They will charge me to come out to my home even though I bought two year Geek Squad plan They also said I would still get charged even if they were unable to get Monitor hooked up to tower, but doesn't turn on me setup Seems like there is one probably really easy fix but I don t want to pay to have them come out if I get charged regardless of the outcome Anyone out there with any idea what could be preventing the monitor from powering up other than Monitor hooked up to tower, but doesn't turn on it s bad which is unlikely as it was brand new sealed in the box Thanks nbsp

A:Monitor hooked up to tower, but doesn't turn on

If no standby LED on monitor, is there a separate on/off switch on the side of the monitor?
With LG there are usually manual buttons for CH+- & vol +- plus On/Off (although I have seen monitors with no on/off at all.)
Also check for 'hidden' buttons on the front lower edge of frame or under the front (right) edge.
I would try a different mains lead/cord that is known to to work, also check for a fuse in the plug, could be missing, or isolated with plastic foil.
Even with no inputs the monitor would show a 'No Signal' sign if it was working.
If no 'standby' LED and you have a separate AC to DC adapter block then that could be the problem. All monitors I've seen have a direct AC connection though.
If it then does work, the on-screen menu will need to be selected, and 'input' changed to HDMI.
 

http://www.techspot.com/community/topics/monitor-hooked-up-to-tower-but-doesnt-turn-on.204715/
Relevancy 21.93%

Here again since I have the most weird problem ever which I have never seen nor heard of before. I recently upgraded the OS on a friends computer, from Vista to 7. However now I can't seem to get the onboard ethernet adapter to work, it can't be seen in device manager nor anywhere else. I have tried to reset the bios (by removing the cmos battery) and I have also checked that the network adapter is set to 'Enabled'. Also, when I connect the cable to the ethernet port no lights go on, it doesn't give any sort of hope what so ever. The cable is ok, the "modem" is ok, and everything else seems to be in order and yet it doesn't work.

Computer in question:
HP Pavilion 6530sc
Non-default GPU and added 1Gb RAM
 

A:Solved: Computer doesn't recognize the network adapter

Whenever you install a new OS, always take note of the model of core system hardware like GPU, chipset, and ethernet/wifi (there are a few others that aren't as important, but nice to have updated) since those are critical to your computers core functionality.

However, a quick google search of your model yielded me with your PC's system specs. Your PC contains a Realtek RTL8201N ethernet adapter. So far I am unable to find a driver from Realtek itself and the HP driver is not Realtek, but instead nVidia nForce.

So after a bit of searching, I came across this: it seems to me that you have an old chipset from nVidia. I am not completely sure, but I think you have an ION chipset. Try installing this ION chipset driver (64 bit) ==OR== this ION chipset driver (32 bit) and tell me if it works. It should include the necessary component drivers and if it works, it means you have an ION chipset like I suspected.

Here are the specifications for your PC BTW.
 

http://www.techspot.com/community/topics/solved-computer-doesnt-recognize-the-network-adapter.204750/
Relevancy 21.5%

I usually connect the vga cable from my monitor to the port on my gpu,but for some reason it doesn't display anything now.

I tried to locate the source of the problem by doing these

1) Connected the vga cable from my laptop to the monitor, and it displays the laptop's content just fine so the monitor/cable isn't the issue.

2)Connected the cable to the vga port on my samsung smart tv and to the slot on my gpu and my desktop boots and functions just fine.

3) I opened up my cpu cabinet and dusted the ram and the video card and put everything back in place but that didn't help either.

I don't have a DVI cable with me so I can't check if that works and I don't have another similar monitor either I can test it on other than my tv.

Video card: AMD HD6770

Monitor Samsung 23'S22B series
 

A:Monitor powers up, but does not display

Is the port you're trying to get video out of active? It might be turned "off." Just a thought....

Mike
 

http://www.techspot.com/community/topics/monitor-powers-up-but-does-not-display.202749/
Relevancy 19.35%

Hi, hope I've put enough specs in profile for you to help. I have a Compaq Presario 6735s I bought around 2008. CPU quite slow but graphics card not bad so made decision to upgrade. Looked up the laptop manual here to find compatible CPUs for motherboard, socket type etc. Went through 3 different (*****ic) buys before I found one that actually fitted.
Now with everything reassembled, screen will flash up once upon powering on, then nothing. All usual lights come on, even my wireless connects, makes usual start up noises, fan, dvd drive etc ....
Proceeded to take everything apart again, re-connected everything I tampered with. Even RAM, which I didn't have to remove before.
Still same reaction starting up.

Really frustrated with myself as thought this would be the right one. Could honestly cry, haha.

I read the tutorial on here called 'No POST' to no avail either. I really hope it can come back from this.
One last thing I can think of (before pulling new CPU out) is upgrading BIOS to support new CPU but with no screen I am stuck.

Can someone please give me a little direction?
 

A:Upgraded CPU on laptop, now screen won't work

Did you re-install the old CPU to see if the laptop booted normally again? Upgrading CPU's on laptop motherboards can be a very difficult thing to do. What is supposed to be compatible in reality is not
 

http://www.techspot.com/community/topics/upgraded-cpu-on-laptop-now-screen-wont-work.204383/
Relevancy 41.28%

Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp

A:The ps/2 port of the motherboard doesn't work properly

No idea!!?
 

http://www.techspot.com/community/topics/the-ps-2-port-of-the-motherboard-doesnt-work-properly.204104/
Relevancy 19.78%

So currently I have a modem in the living room Cisco EPC and then it goes all the way to my room to a Cisco WRTG V router Yesterday out of the blue it stopped working This is because I previously had routers in the network Asus and Cisco anyways I decided to disconnect my asus and use only the cisco but the router just won t work I reseted it to it s fabric settings But when I log into it it says the router s IP adress is And hands out IP adresses to my pc such as I have no idea what to do Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users MiKi gt ipconfig all Windows IP Configuration Host Name MiKi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search Router work won't properly List sbb rs Ethernet adapter Local Area Connection Connection-specific DNS Suffix sbb rs Description Intel R V Gigabit Network Connectio n Physical Address - B- - Router won't work properly -B - E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local Router won't work properly IPv Address fe d d ca Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday June AM Lease Expires Wednesday June AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -B -D -EB- - B- - -B - E DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter isatap sbb rs Media State Media disconnected Connection-specific DNS Suffix sbb rs Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d abd e a Pref erred Link-local IPv Address fe e a Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter TO Adapter Connection-specific DNS Suffix sbb rs Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ebd bbaa ebd bbaa Preferred Default Gateway c c DNS Servers NetBIOS over Tcpip Disabled C Users MiKi gt This is my ipconfig with the modem and this is with my router Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users MiKi gt ipconfig all Windows IP Configuration Host Name MiKi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Intel R V Gigabit Network Connectio n Physical Address - B- - -B - E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d d ca Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday June AM Lease Expires Thursday June AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -B -D -EB- - B- - -B - E DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BE - - BA - E- B A F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes C Users MiKi gt nbsp

A:Router won't work properly

Have you tried pressing the reset button on the router? (long press)
I have seen this 'reset button' on several router brands/models like tp-link (tl-wr941n, tl-wr740n old version, tl-wr740n newer version), buffalo draft-N routers, cdrking routers (made in china router brand sold in the Philippines).

if the reset process I described is the same as what you typed in your first post, try to manually change the router ip address.

my wimax modem ip address = 192.168.1.1
so for the tp-link wr-740 router, I use ip address - 192.168.0.1

login to your router and change it. if there's any save button, click it. my router prompts me to reboot the router. after a few seconds, the preferred ip address I have chosen is good for use.
(I have hidden my MAC address)
 

http://www.techspot.com/community/topics/router-wont-work-properly.203477/
Relevancy 21.07%

The video is 1 min and 14 sec, yet only the couple first seconds is enough to understand the problem. what could be the problem for?

as you can see, half of the screen display colors correctly, the other half, the colors and texts and smudged, they are there but smudged and not applicable to read or view
 

A:LG G2 IPS display weird problem - video for explanation

Can you still RMA it, or did you do something that is not covered by the warranty?
 

http://www.techspot.com/community/topics/lg-g2-ips-display-weird-problem-video-for-explanation.203474/
Relevancy 21.5%

I want to record from a webcam, mounted on a vehicle.

I need to use 2 displays, 1 for the camera fullscreen 7? display (HeadsUp), and the other displaying the software controls.

Any suggestions for the hardware/software?

Mac OS preferred but can go with PC
 

http://www.techspot.com/community/topics/two-display-webcam-recording.203677/
Relevancy 21.07%

Ok I m not the best and building computers and am very new at it My fresh build will boot but display absolutely nothing on the it like except everything Fresh display all powers at should build, no on monitor monitor by nothing I mean it won t even go to bios or turn the power light from standby to on This build will boot up all fans will run with no problems including cpu and video card fans and everything will shut Fresh build, everything powers like it should except no display at all on monitor off by holding down the power button properly Also I have not gotten any light or beep codes Here is what I have asus m a motherboard amd fx -core processor black edition asus gtx ti direct cu video card ddr gb Fresh build, everything powers like it should except no display at all on monitor x gb MHz dual corsair vengeance ram watt xion xio power supply sata tb barracuda hard drive dvd cd - writable drive cm storm scout case I have tried trouble shooting programs for the motherboard and video card with no results I have tried resetting the rtc ram I have double checked the power plugs are plugged in properly and making a proper circuit I have taken everything out except the motherboard cpu cpu fan and power supply and still gotten no beeps I have tried changing how the stupid speaker wire connects connecting incorrectly according to the manual and still no freaking beeps I have tried using hdmi and vga cords connected to my tv that supports pc s and a monitor nothing worked cord wise but my old pc worked like a dream when connected to them when talking to tech support for the motherboard they helped me check that it wasn t a grounding issue I have talked to all my pc buddies called tech support and no one can tell me anything i haven t tried or that has worked I have no idea what is wrong I need help I have spent the last two day all day working on this with no clue what is happening nbsp

A:Fresh build, everything powers like it should except no display at all on monitor

do you have the monitor cable plugged into the GPU or MOBO?
 

http://www.techspot.com/community/topics/fresh-build-everything-powers-like-it-should-except-no-display-at-all-on-monitor.178244/
Relevancy 21.5%

When I power on my Toshiba equium a200-151, the screen lights up but no display at all - even though there is loading activity. I rigged up to my PC monitor and everything is fine - see bios and windows loading etc. Borrowed a spare compatible working screen but same problem. I'm not 100% sure if its the inverter or the ribbon connector - any ideas before I buy a new inverter? Thanks for looking.
 

A:Lcd lights at power on but no display

I would say that the video cable (ribbon cable) is bad based on what you have tried so far. This cable goes from the motherboard to the LCD display. Did you use the old inverter off the suspect Toshiba when you tried the compatible spare LCD panel?
 

http://www.techspot.com/community/topics/lcd-lights-at-power-on-but-no-display.203111/
Relevancy 22.36%

Hello all,
My friend's Windows 7 x64 ultimate machine recognizes some USB flash drives but not some other ones. The types of all are USB2 and also all drivers are installed (device manager). I don't know what is the problem. Is there any idea please?
 

A:My machine doesn't recognize some USB flash drives

USB Device Not Recognized? A Quick Fix For Windows XP/7/8
 

http://www.techspot.com/community/topics/my-machine-doesnt-recognize-some-usb-flash-drives.202702/
Relevancy 21.5%

Whenever I unplug from the router and go upstairs, I can't connect to my wi-fi. The problem also persists downstairs unless I am connected by ethernet. It's been happening for about 2 days. At first the wi-fi would jump in and out randomly and quickly but now it simply wont connect. Is it a virus or how can I fix it?
 

A:Wifi doesn't connect unless directly connected to router by ethernet cable

You might just need to restart your router / WiFI AP to resolve that issue.
 

http://www.techspot.com/community/topics/wifi-doesnt-connect-unless-directly-connected-to-router-by-ethernet-cable.202219/
Relevancy 41.28%

Hi everyone,
I've bought a Sound Blaster Recon 3D a year ago.
It works awsome ! But this morning it was off the light and cannot work while plug in any computers.
I am very bored and nervous, I think it was broken down and cannot work anymore.
Am I right ?
Please say NO and help me
Thank you very much.
 

http://www.techspot.com/community/topics/my-sound-blaster-wirless-doesnt-work.202270/
Relevancy 19.35%

Hello My sound chip on my board was blew for no reason bad thing only being a month old bored and I am not waiting days to rma it and for me to get it back anyway I managed to pick up a old sound card not sure on the model Motherboard? Work. Not Maybe Did Sound Card that worked fine for three days then stopped outputing audio so I bought a sound card intex cmi that did not have the bit wndows dirvers and everytime I turned the computer off the machine would not detect the card I then I have to press the reset button or turn the system a few times to get the card to be recognized again and I could not also find the drivers for the OS Sound Card Did Not Work. Maybe Motherboard? I checked at the back of the cards box and it says bit pci bus master What does the mean could that be that the card was not compatible for the stystem or could it be the motherboard I tried a nvidia video card in the Sound Card Did Not Work. Maybe Motherboard? PCI-E slot and the card works fine with no faults The sound card was using the PCI slot and I tried every PCI slot My Motherboard asrock fm a x extreme Thanks nbsp

A:Sound Card Did Not Work. Maybe Motherboard?

I tested in a very old card from 2001 or 2004 something like that and it appears there's power going through the card so that's the plus.
Maybe it's because I'm using old crap and the sound card model is old?
 

http://www.techspot.com/community/topics/sound-card-did-not-work-maybe-motherboard.202240/
Relevancy 41.71%

My laptop doesn't work with wifi when I first open it. It will show at the bottom of the screen that it is fully connected and has full bars, but when I open the internet the pages will not open. I must restart the computer and then it will work. How can I fix this?
 

A:Laptop doesn't work with wifi

When the WiFi is active, the laptop NIC should be disabled - - easy - - just unplug the the cable to the router.
 

http://www.techspot.com/community/topics/laptop-doesnt-work-with-wifi.201724/
Relevancy 19.35%

I hope this is the right section to ask this question in. I'm a big newbie.
I'm having an issue that I have no clue how to solve. There is a specific webpage that I try to view at home with my laptop, and it never loads on Chrome and Firefox, but does on Explorer. But when I take the same laptop to work or school, it does load that website on all browsers. I also have a desktop that stays home, and has the same problem. Its so strange. I don't know if it's a network thing, or an facebook app thing.

I've tried re-installing Chrome, deleting all cookies and caches, disabling all extensions or plugins, and updating Flash and Java. Any ideas?

Mod Note: Facebook game link removed, you are too new to be trusted fully. Problem m ay be solvable without the exact game anyway.
 

http://www.techspot.com/community/topics/website-works-at-work-not-home.201025/
Relevancy 22.36%

So my deafult gateway dosnt start with 192.168 but for my laptop it does and my brothers pc does for me it starts with 46.109.248.1 Any Help I cant portforward Help me il try anything and my Router is Technicolor
 

A:Deafult gateway doesn't start with 192.168

Can we assume "my laptop it does and my brothers pc does" applies to his pc connected to your router?

login as an admin, get a command prompt and issue these two commands
netsh winsock reset
netsh int ip reset c:\resetlog.txt

reboot
 

http://www.techspot.com/community/topics/deafult-gateway-doesnt-start-with-192-168.200832/
Relevancy 19.35%

Hello! I live in a college apartment (so no access to router). When I hook up my ethernet cable to my computer, all of my messengers work and are connected but I cannot use internet browsers. I recently reformatted my computer and was using a wireless adaptor, but here the internet is so slow that there's really no point and for a decent connection you need to be plugged into the wall. The wall connection worked fine until I reformatted.

This happened before when I moved to my first college and had to use the ethernet cable. I've done everything from messing around with internet explorer proxy settings and whatnot, but what did work was something I found in a thread. It instructed me to go somewhere and delete a file that was blocking the internet part, I guess? I deleted this setting/file and the ethernet connection worked just fine afterwards. I can't find this thread (probably not on this website) anymore. Does anyone here know possibly what the file was?
 

A:Help locating a file to help my ethernet work again

Check for optional Windows Updates, specifically a network driver. The most common name is Realtek.

And/or try installing this driver. - Software: Drivers & Utilities

If still no go, which computer do you have?
 

http://www.techspot.com/community/topics/help-locating-a-file-to-help-my-ethernet-work-again.200022/
Relevancy 19.35%

I am using windows 7 and my webcam is not working,whenever I tried to use to it says "webcam not detected ". even it is absent in device manager and I hope someone will help me to solve the problem.
 

A:Dell integrated webcam won't work

What is the exact brand and model # of your laptop?
 

http://www.techspot.com/community/topics/dell-integrated-webcam-wont-work.199619/
Relevancy 19.35%

Just got the new mouse home, but to enable aim precision and other programmable buttons and need to get the drivers. When I try to download them it says plug in the device, which is already plugged in and I have also tried in different usb ports and safe mode. Anyone with this mouse got it to work?
 

http://www.techspot.com/community/topics/mad-catz-rat-7-mmo-mouse-drivers-wont-work.199725/
Relevancy 19.35%

I have a headset set with a mic. It has 3.5mm plugs for the mic and the speakers. Just recently they stopped working together. What I mean is if I have either one of them plugged in, that one works. If I have both plugged in, the sound manager appears as if neither of them are plugged in. I've tried other headphones with the jacks and get the same result. I've tried reinstalling the driver, doing a system restore and using CCleaner to clean my registry. I've also messed around with just about every setting in the audio manager. Anyone have any ideas? It's odd that they work independently, which leads me to believe that the insertion detection is working just fine.

I have a Toshiba Satellite R845-S95 with Windows 7.
 

A:Headphone and Microphone Jack won't Work Together

Turn off the insertion detection on realtek. Top-right corner somewhere, from memory.
 

http://www.techspot.com/community/topics/headphone-and-microphone-jack-wont-work-together.199662/
Relevancy 21.93%

Hey Guys,

I have Toshiba satellite laptop, but suddenly its screen starting showing like this...Can anybody help me to fix it. Thanks


 

A:Display Problem

This is an indication of a broken LCD panel. Probably caused from dropping or putting something heavy on the closed laptop. The LCD panel will have to be replaced
 

http://www.techspot.com/community/topics/display-problem.199637/
Relevancy 22.36%

Hi I have Toshiba Computer my External doesn't recognize HD. satellite M The original HD that came with the laptop is Toshiba MK GSX with GB storage I bought a new HD Toshiba MQ ABD with GB storage I also upgraded my RAMs - I Computer doesn't recognize my External HD. installed Computer doesn't recognize my External HD. my new HD in my laptop and installed windows XP SP I want to use my old HD as an external HD - I plugged it into the computer via USB cable but the computer wouldn t recognize the external HD - I plugged the old HD back into the computer and formatted it and installed a fresh Win XP SP - I put my new HD back into the laptop and tried to plug the old HD as external HD to see if it would work now but the computer still doesn t recognize it - I opened Computer Management and looked under Disk Management but the external HD didn t show up there - I plugged it into different USP and waited for a minute and a new icon for the external HD in my computer pops up I double clicked it and gives an error quot Please insert a disk in drive E quot Then the icon disappears I unplugged the HD and plugged it back in but the icon would show up again I waited for an hour before I plug it back on The icon appeared for seconds and then disappeared again I know it s not a hardware problem for the following reasons - When I plug in the external HD the light in the HD case turns on Red - I can hear and feel that the HD is running - I plugged the HD back into the laptop as internal HD to check if it works and Win XP shows up so there is nothing wrong with the HD Can someone please Help me how can I use the old HD as external HD and make the icon for it shows up in my computer nbsp

A:Computer doesn't recognize my External HD.

Yeah a lot of the older HDD don't work so well with the newer USB / IDE/PATA/SATA adapter kits. I am using one here with 3.5 HDD Seagate and WD to see which ones are working and not. You can hear them spin-up but that doesn't mean they're 100% okay. In your case you should try a desktop instead of the laptop USB ports might be getting duff. Like I said try a different PC see if they can be seen. External USB just get WD Passport and then transfer any data over to it from the old one. That 100GB I am sure the life on it started to go. MTB on these HDD in the past didn't live up to as promise.
 

http://www.techspot.com/community/topics/computer-doesnt-recognize-my-external-hd.199657/
Relevancy 20.21%

I've been putting together this build as my first gaming PC and I'm wondering will there been any compatibility issues between any of these parts?

My budget is roughly: 500 / $800 / ?600

Case:
http://www.scan.co.uk/products/zalm...-internal-35-x5-external-35-x1-internal-25-x1

PSU:
http://www.scan.co.uk/products/500w-storm-silent-lpj19-25-eps-12v-quiet-fan-atx-v20-psu

RAM:
http://www.scan.co.uk/products/8gb-...1600)-non-ecc-unbuffered-cas-9-9-9-24-xmp-15v

HDD:
http://www.scan.co.uk/products/500gb-toshiba-dt01aca050-35-hdd-sata-iii-6gb-s-7200rpm-32mb-cache

Motherboard:
http://www.scan.co.uk/products/giga...r3-sata-iii-6gb-s-sata-raid-pcie-20-(x16)-atx

GPU:
http://www.scan.co.uk/products/1gb-...pu-1000mhz-640-cores-dp-dl-dvi-I-hdmi-plusmou

CPU:
http://www.scan.co.uk/products/amd-...re-s-am3plus-38ghz-8mb-total-cache-95w-retail

Optical Drive:
http://www.scan.co.uk/products/lite...dvdplusrw-x8-rw-x6-dvd-ram-x12-sata-black-oem

Wireless Card:
http://www.scan.co.uk/products/asus-pce-n15-pcie-300mbps-80211b-g-n-wireless-adaptor-low-profile

Any advice is appreciated
Thanks
~Jack
 

A:Will this PC work?

That's a pretty sketchy power supply, I wouldn't use it.
That is OK, but I think it would be easier for you if you just got a wifi enabled motherboard.
 

http://www.techspot.com/community/topics/will-this-pc-work.199362/
Relevancy 22.79%

Just picked up a Logitech HD Pro C920 and love it. Looks great...but for some reason the audio is...weird.
It sound maybe a little 'muffled'...I don't really want to say 'choppy', but it's close.
System should be more than equipped to handle everything....
i7 processor
6GB Ram
Windows 7 premium 64 bit
I know I have different USBs inside...2.0 and 3.0....but I'm not positive which is which...wondering if this would make a difference?
I'm using onboard sound instead of my old (out of date) soundcard

Really love the HD recording but I have to have better sound!
Thanks for any help
 

A:Audio doesn't sound right

Switched to the (clearly labeled) USB 3.0 didn't notice a difference.
 

http://www.techspot.com/community/topics/audio-doesnt-sound-right.198735/
Relevancy 22.79%

Hi guys I ve spent today building a pc for myself However on pressing the on button there s no reaction at all My machine specs are M B - Gigabyte GA- A-UD Processor - AMD RAM - Corsair Gb DDR Case - Zalman Z Graphics card - Gigabyte HD PSU - Corsair CX M W Wi-fi card also installed but can t remember the name and seem to have temporarily lost the box in a pile of packaging So far I ve checked the CPU and motherboard power sockets the wall plug sockets and the power cord to my PSU I ve also checked the connections between my case and the motherboard and these all appear to be correct on power build PC doesn't As part of this final point I switched the power on LED with the power button they both originate from the same location so thought they may be mixed up Anyhows I got a solid LED which suggests to me that a there s power running through the switch circuit and b the pc isn t booting when told to as a PC build doesn't power on solid LED would indicate PC build doesn't power on circuit completion which would be the equivalent of holding in the on button If anybody could shed any light on where to go next I d be eternally grateful currently searching the house for a paperclip to test the PSU nbsp

A:PC build doesn't power on

Does the CPU and case fans move at all, when pressing the power button?
 

http://www.techspot.com/community/topics/pc-build-doesnt-power-on.198098/
Relevancy 22.36%

Hey,,how are the things,,I have a problem,my dvdrom doesn't read any empty disks.I tried some disks that has things on it..all of them worked.only the empty disk doesn't work.I bought another disk and it still not read,,what to do ? :/
 

A:DVD-Rom Doesn't Read Empty Disks

Question: Do you have a DVD Rom or a DVD burner? If you have a DVD burner then it should be able to read the blank disks so that you can add files to it. But if you insert a blank disk into a DVD Rom drive (that does not have burning capabilities) then it might not read the disk because it contains no information to read.
 

http://www.techspot.com/community/topics/dvd-rom-doesnt-read-empty-disks.198089/
Relevancy 21.5%

Hello! I'm having no luck with previous threads regarding this same question.

For starters, I just bought two new items for my computer so it's not entirely new, but quite the upgrade

Previous Specs:
PSU: 500w
CPU: AMD Phenom II x4 965
GPU: nVidia GeForce 660
MOBO: Biostar A880GZ
RAM: 8GB

New Specs
PSU: 500w
CPU: Intel Core i7-4820K
GPU: nVidia GeForce 660
MOBO: BIOSTAR TPOWER X79
RAM: 8GB

I boot it up and hear no beeping sounds all fans are running well. I believe I have everything in place. I can provide pictures if needed.

Thanks in advance!
-Adrian

Bumping with my PSU: http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Maybe there are some extra plugs I need in the PSU that my current one isn't offering?
 

A:PC turns on; Monitor won't Display

Recheck all your connections. Plus make sure your video card and memory are seated. The PSU should be fine.
 

http://www.techspot.com/community/topics/pc-turns-on-monitor-wont-display.197972/
Relevancy 21.07%

Hi

I have a printer
There is no lighting up
The power supply give
red wire about 7 V
blue wire about 11 V

Holding down the power button en stop/reset won't work

How can I test the logic board is defect?

Image logig board






Cheers
Harrie
 

http://www.techspot.com/community/topics/canon-printer-pixma-mp610-no-power-no-display.197978/
Relevancy 21.93%

I wanted to get more RAM for my older PC (CPU Q8400 on Asus P5P43TD PRO). The motherboards' specs say it works with 1600Mhz RAM so I bought 8GB of Kingston HyperX Blu (Kit 2x4GB), code KHX1600C9D3B1K2/8GX.

I already have the latest version of BIOS but it doesn't POST for the life of me (fans are working, black screen, no beeps). I tried inserting only one stick (tried all 4 slots). I tried both sticks in slots 1 and 3, both sticks in slots 2 and 4, still no luck.

When I put back my old RAM (2x2048 Kingston Value RAM) it works just fine. Everything in BIOS is set to AUTO. I tried increasing the RAM voltage to 1.65v as specified on the new sticks without success.

I'm sure the memory is fine but I just can't get it to work. Any suggestions are greatly appreciated!
 

A:Asus P5P43TD PRO doesn't POST with new HyperX 1600 RAM

You may need a BIOS update. CPU and Memory compatibility updates are common BIOS updates. Before you give up on the RAM modules, try updating your BIOS.

ASUS Support For P5P43TD PRO

Caution though, follow the instruction carefully. The updating can not be interrupted once started. It only takes a few minutes to complete, but any interruption can brick the motherboard if it is not equipped with a backup BIOS.

I just recently bought a motherboard I thought was completely dead (same symptoms as your board, no post). I never suspected the motherboard wouldn't recognize my i7 CPU. The tech guy had me use an i3 to flash the BIOS. Low and behold the BIOS update worked.
 

http://www.techspot.com/community/topics/asus-p5p43td-pro-doesnt-post-with-new-hyperx-1600-ram.197939/
Relevancy 42.57%

The n key had been not working properly and now it stopped all together. I took the key off and tried pressing the white piece of soft plastic but nothing shows up. Is it time to get a new keyboard or is there something else to try? It seems like such a waist to throw out a keyboard when 1/100+ keys stopped working.
 

A:1 key on keyboard doesn't work

Try it on another PC and see.
 

http://www.techspot.com/community/topics/1-key-on-keyboard-doesnt-work.197264/
Relevancy 21.93%

Ok so I have a computer about months old I have always had it hooked up to No Display my tv with an hdmi cable Well I switched that hdmi cable over to my xbox I then switched it back to my computer and now nothing is displaying on my tv I tried restarting and removing power supply and nothing seemed to work I took the computer monitor out of my sisters room and hooked it up to my PC and nothing displayed there either The monitor would just say going to power saving mode I know that the VGA wire is connected correctly because when I remove it the monitor shows a message saying quot no vga detected going into power save mode quot and when I plug in the vga it just simply No Display say going into power save mode I tried pushing keys on keyboard and moving mouse and such and nothing happens anyone know whats happening and how No Display to fix this nbsp

A:No Display

Please list your computer specs. This will help someone assist you better.
 

http://www.techspot.com/community/topics/no-display.197714/
Relevancy 42.57%

I don t get why my touchpad doesn t work when I unplug or turn off my mouse I found all the settings I realize I may get an answer I don t want Download drivers etc I can live with this problem unless I suddenly don t have my other laptop especially after spending the night searching for downloading and installing drivers for doesn't work Touchpad my other laptop I was surprised to find that the windows professional my home machine is windows home didn t provide me with network and Touchpad doesn't work other drivers I wasn t seeing any wireless connections Initially I was using an internet stick and the problem wasn t visible I take that machine out with me I had it home last night and that s when I found the problem And trying to get that touchpad driver had me wondering about this one I don t use my laptop keyboard on my home machine preferring a natural contour full keyboard I plug in so I never deal with the touchpad otherwise I d be hitting it all the time which I used to do I am a mouse guy If I had to to take this machine out the touchpad thing would drive me nuts Any thoughts nbsp

A:Touchpad doesn't work

Hi Aarby,

Some computers have keyboard shortcuts which could be a separate key on the keypad or a combination of the Fn + any other Function key depending on the system model for enabling or disabling the touchpad. Since you have not mentioned the system model of your computer, some steps you may try are:

1.Go to Control Panel > Mouse > Device Settings>Click Enable (if disabled).

2.Check under Mouse Properties in Control Panel>Hardware>Mouse. There may be a check-box for Disable Touchpad/Pointing Stick when external USB mouse is present. If this is checked and you connect an external mouse to your laptop, the touchpad may be disabled.

Additionally, we recommend you check the system manual or try some of the steps mentioned in the link below.

Click on this Microsoft link to troubleshoot Mouse, touchpad, and keyboard problems in Windows: http://dell.to/1arqGvz

Hope this helps resolve the issue. Please reply if you have further queries.

Thanks & regards,
Babita G
#iworkforDell
 

http://www.techspot.com/community/topics/touchpad-doesnt-work.197125/
Relevancy 19.78%

OK, I know it's weird, but I need to run 32-bit XP SP3 on this board. Anyone know for sure if it will? Asus specs don't list XP but drivers seem abundant for it.

Thanks for any help !!!
 

A:Asus P9X79-E WS and 32-bit XP SP3 - Will They Work?

I can't make any promises, but I'd be highly inclined to think it would probably work, just from the fact that ASUS listed drivers on their website for Windows XP; if the board wasn't supported, wouldn't they simply not allow you to choose it as an OS selection when downloading drivers? Maybe when they omit XP from the supported OSs list, it's only because it's not fully supported, in terms of long-term updates, even though the OS works. Again this is just speculation, but I don't see a good reason why it wouldn't work.
 

http://www.techspot.com/community/topics/asus-p9x79-e-ws-and-32-bit-xp-sp3-will-they-work.196790/
Relevancy 22.36%

Hi
I know this topic is very old! but I have the same problem now!
But I don't have any other hard disc on my PC and this SATA 3 supported hard drive is only one! I don't have any OS on my pc. when I connect hard drive to my p4p800-x mother board it doesn't recognize my sata 3 drive! please help me what should I do!
 

A:Motherboard doesn't recognize my SATA 3 drive

Hey Andromec. Is the drive being detected in the BIOS.
 

http://www.techspot.com/community/topics/motherboard-doesnt-recognize-my-sata-3-drive.197021/
Relevancy 22.36%

I had wireless internet with AT&T and everything was fine. Today I switched to Bright House and my laptop will not connect wirelessly to the router. I am able to use the ethernet cord to connect and my mobile devices connect to the wireless network with no problem. Please help ! My computer is an Acer and is operating on Windows 7
 

A:Ethernet works, wireless doesn't

Hey Ashp10. You had AT&T as your ISP, but now you are using Bright House, correct?. Did you have your own router when with AT&T or were you using a combo modem/router provided by them. How about with Bright House, are you using a box provided by them or are you using your own router?.
 

http://www.techspot.com/community/topics/ethernet-works-wireless-doesnt.197034/
Relevancy 18.92%

I built my first custom PC a month or two ago, and this is the first problem I've encountered.
I live in an apartment complex that provides their own ISP, so my PC has been plugged straight into my ethernet port in my wall (no router). It's worked perfectly until just today.

In the bottom right corner, my computer is telling me that I am connected to the internet, but nothing's working...I really hope it's not a problem with my motherboard.

The thing is, every other device, wired or wireless, in my apartment obtains internet, so I feel like it has to be something with my computer. It was working fine last night and I came home today do start homework and it wont connect.

I'll provide whatever information may help with solving this problem. Anything at all would be appreciated.
Thanks!
 

A:Computer says connected, but i get no internet. Other dives in the apartment work fine

Hey mattyg. A few questions.

Are you just using one browser or do you have the same issue when you try a second browser?

If another pc in your apartment connects and gets on the Net via Ethernet cable, is it using the same wall jack?

Is the wireless connection your wireless device connects to coming from your building's Internet connection, or could it be connecting from some other network?

What message do you get when your browser opens and cant make a connection to the Net?
 

http://www.techspot.com/community/topics/computer-says-connected-but-i-get-no-internet-other-dives-in-the-apartment-work-fine.196947/
Relevancy 19.35%

Hi everyone

I have HP dv7 2015tx running windows 7 (64bit) and I have serious problem with wifi connectivity. in last few months the wifi connection started to malfunction and randomly detect and connect to hotspots. and then it stopped working completely after a while. I tried:

-reinstalling, upgrading .... the wireless driver
-using wifi dongle
-replacing the wifi card with a new one
-.....
and I found these can not help me in this issue. the same thing happened to my blutooth connectivity last year and after I reinstalled the windows it was all fixed. but this time im not planning to reinstall the windows again.
So in my point of view this problem might be fixed if I fix the way windows is detecting any wifi access !! is there any file missing in windows related to this ?!!


Please help me in this matter
 

A:WiFi adapter does not work on my laptop

Do you have a wifi router and that's causing you these problems
OR
are you having issues with accessing hotspots?
 

http://www.techspot.com/community/topics/wifi-adapter-does-not-work-on-my-laptop.195037/
Relevancy 21.07%

Hey everyone I idle monitors display Dual PC after anything won't occasionally is ve been having a recent issue with my monitors and it s really been stumping me lately I recently acquired a nd Yamakasi x monitor from South Korea I love these things and while the monitors themselves are working quite well I ve been having an issue since I connected the nd one Occasionally maybe - of the time when the PC has been idle for long enough that Dual monitors occasionally won't display anything after PC is idle the monitors have turned off when I come back to the PC and move the mouse or press a key on the keyboard the monitors turn back on and I am promptly greeted with a black screen on both however it appears that there IS a signal as the monitors turn on and remain on however that signal is just a blank black screen I ve got both monitors beside each other and the one on the left side is plugged directly into the dual link DVI port on the back of my master in my crossfire configuration The right-side monitor is plugged into an active displayport to dual link DVI adapter which also requires a USB port for power When I notice this black screen effect I also notice a small thin blueish bar spanning the height of the right monitor at the far right side of the screen this bar looks about the same thickness as the side edge of an open window in Windows but I ve never been able to tell if that s what it is or not UPDATE Upon closer inspection of the quot blue bar quot I can now tell that it doesn t look quite the same as the Windows side edges of a window It does span the entire vertical length of the screen it s about - pixels wide fairly bright blue and the far left or right seems to be random as to which it is column of pixels is a brighter blue than the rest Also the line isn t QUITE at the far edge of the screen it s offset from the edge by about another - pixels When I get this black screen effect the mouse cursor will never appear and no matter what I do including pressing control-alt-delete nothing else will ever appear on the screen If I press the power button I can see and hear my PC doing the usual process that it does when Windows goes through a normal shut-down which is the current setting for the functionality of the power button and then it turns off like normal Upon restart the issue is gone of the time until the PC is left idle again except that the right-hand displayport adapter monitor is not recognized by Windows upon reboot until I unplug and replug it I m running Windows Professional and I just freshly reinstalled Windows on a blank solid state drive within the last two weeks It appears to me that Windows is still running just fine since it seems to shut down normally and it looks almost as though the black screen is a huge window that is stretched almost fully across my monitors with only the far right edge visible and without any way to interact with this window However I also wonder if it could be an issue with the dual link display port to DVI adapter because every single time upon restart of the PC after this issue occurs it only recognizes the left side monitor and won t recognize the right one until I unplug the adapter from the displayport and reinsert it Obviously I don t want to be unplugging and replugging my monitor on a daily basis so I m wondering if anyone has heard of a similar problem or what I could possibly do about this Thanks in advance everyone nbsp

A:Dual monitors occasionally won't display anything after PC is idle

Update: I've discovered that usually the problem can be solved by unplugging and replugging the displayport adapter while the PC is on, but only if the aforementioned "blue line" is present on the right-hand screen when I move the mouse. Yesterday, I had a similar issue except that instead of turning back on and detecting the PC's video signal which is just a black screen for both of them (with blue bar on the right one), the monitors (both of them) refused to even acknowledge that there was a signal coming to them at all and wouldn't even turn their backlights on or wake from sleep mode. Even when I hooked up 2 different monitors using standard DVI-D single link or dual link cables, I still could not get any video signal to output at all, to ANY monitor.

Turning my speakers on, I found that I could hear the Windows 8 "device connect" and "device disconnect" sounds when I unplugged or replugged either of my 27" monitors, but nothing at all was heard when attempting to switch to other monitors. This tells me that Windows IS detecting and seeing the monitors, but somehow the video signal is just not reinitializing properly after the computer turns the monitors off after idle time.

The only solutions I've got at the moment are to set Windows to NEVER turn my monitors off, or to shut down the PC every single time I'm done with it; neither of these solutions are particularly pleasing to me. Please let me know if anyone has any advice at all, even if it's just an idea that may or may not work out.

BTW my PC specs are:

2500K currently at stock settings
16 GB Patriot DDR3-1333
MSI Z68A-GD55 B3
2x Radeon HD 7950 also currently at stock settings
120 GB Vertex 3 (OS/main apps drive)
1TB WD Blue
1TB WD Black
1000W Cooler Master modular PSU

 

http://www.techspot.com/community/topics/dual-monitors-occasionally-wont-display-anything-after-pc-is-idle.196256/