Windows Support Forum

Touch Screen of HP Envy m7-n101dx (touch)

Q: Touch Screen of HP Envy m7-n101dx (touch)

Hi, I've recently formatted my Laptop HP Envy m7-n101dx (touch) and installed Win7 Ultimate (64 bit). I have downloaded all drivers available on HP website and installed on my laptop. There is only one unknown device left (acpi\msft010), and I'm unable to to find the correct driver. My problem is I'm unable to use the touch screen of the laptop, I've googling and found that is there must be a problem with with the Human Interface Device, but when I've checked the Device Manager no Human Interface Device is on the list. Please could anyone help me out. Thanks in advance

Relevancy 100%
Preferred Solution: Touch Screen of HP Envy m7-n101dx (touch)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Touch Screen of HP Envy m7-n101dx (touch)

Hello @JeffJadoo, Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your issues, with help from the community! I understand that you are having an issue with the Touch Screen, and wanted to assist you! Did the notebook originally ship with Windows 10? How did you go about formatting the notebook, and installing Windows 7? You may be able to use the Recovery Manager to restore the drivers, however, based on how you installed Windows, the Recovery Partition may already be removed. You can also try reviewing the following document, to see if the information helps: HP Notebook PCs - Touch Screen Issues (Windows 8) Please post back with the results. It is possible that the Touch Screen may not be supported for Windows 7 on that particular notebook. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for. Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Touch-Screen-of-HP-Envy-m7-n101dx-touch/td-p/5562972
Relevancy 108.5%

Several weeks ago I started to have a problem with my cursor suddenly disappearing nbsp It can be brought back with the track pad but disappears immediately touch HP screen envy cursor with m7-n101dx Disappearing again if I touch the screen If I plug in a mouse and only use that the cursor stays nbsp The only fix generally is a reboot although following one occurrence it spontaneously reappeared as a functional touch screen cursor sometime after disappearing nbsp This question was posted on a Windows forum and per the recommendations there nbsp I have updated several drivers from within windows device manager or found them to be the latest and by downloads from HP site chipset nbsp There was a previous similar question for Windows in which the solutions included updating the system event utility from HP which I do not believe I have done if that is still a potential solution The problem persists nbsp I also had an occasion yesterday just the second such where the cursor was moving on its own and I was unable to use or control it or make any selections and had to do a hard shutdown restart Hardware failing Disappearing cursor with touch screen HP envy m7-n101dx nbsp

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Disappearing-cursor-with-touch-screen-HP-envy-m7-n101dx/td-p/5703235
Relevancy 101.48%

If anyone is thinking of buying an HP Envy all in one touch screen computer then DON'T do it I bought one less than months ago The touchscreen failed and rendered the whole computer inoperable It took several hours on the phone to get them to agree to take it in for repair After three weeks they claimed to have repaired it and sent it back They changed all the settings and locked them so I could not put the settings back to how they were I don't like one all Envy touch HP screen in working on a black screen with white writing It took another couple of hours on the phone to get them to fix it Now less than two months later the exact same problem with the touchscreen has arisen again It has taken two days to get them to agree to take it back in for repair They cannot collect it until next Thursday It will take another two weeks after that before it's repaired and returned to me I am really really disappointed with this machine and warranty service especially so as it was very expensive

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Envy-all-in-one-touch-screen/td-p/5795643
Relevancy 100.62%

How can I turn the touchscreen on, on my computer, I just notice it after 2 months of having it, the mouse stop working

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/Touch-screen-envy-curse/td-p/5742772
Relevancy 100.62%

After a windows auto update my touchscreen no longer responds. I think it is a driver issue. My windows is INSISTING that the best driver is this generic driver from 2006. The display also shows up in the wrong place in the device manager. It's not in the HID list. I'm also having issues with the wireless since an update. It, for lack of a better term, stutters. Other devices will connect just fine and stay connected. But this laptop will drop the connection or simply not 'see' the network. Any help is appreciated.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Envy-touch-Screen-Issue/td-p/5821188
Relevancy 100.62%

I was watching a youtube video when nbsp i decided to do some browsing when suddenly my touch screen stopped responding i have tried restarting factory reset updating drivers everything my screen will only work on one half or it doesnt work at all HP refusing to help as its out of warranty i bought it brand new sealed last month but for some reason warranty is out i called HP who told me to call Currys as that is where it was originally bought by the nbsp hp 13 not screen envy x2 responding touch person who sold it to me nbsp nbsp I called nbsp Currys and they told me to call hp envy x2 13 touch screen not responding HP Parts to see how much the parts would cost on top of a labour charge I called HP parts who told hp envy x2 13 touch screen not responding me they cant find any parts for my laptop on there system and they are unable to help I would of thought that HP would have all parts for all laptops consdering ITS A HP LAPTOP I paid for this laptop less than a month ago and i have no easy way to fix my hp envy x2 13 touch screen not responding problem can anyone help

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/hp-envy-x2-13-touch-screen-not-responding/td-p/5647254
Relevancy 100.62%

I dont recall when the issue has occured, but it has been a while since my touch screen has worked. It weird because under pen and touch it states that there is no inout for pen or touch when clearly my computer's touch screen once worked. What should I do to bring the once beloved feature back? Thank you for your help!

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/HP-Envy-Touch-Screen-Not-working/td-p/5791014
Relevancy 99.33%

In the last two weeks my HP Envy 27 Recline All in One Touchscreen computer has powered down and won't power back on properly.  Tried the power button, no response.  Disconnected all sources of power to the computer and still no response after reconnecting power source and pressing the power button.  Attempted the same process a second time and after a few minutes the computer finally powered up.  Please advise. Thank you.

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Envy-27-Recline-All-in-one-touch-screen-shuts-down-and/td-p/5709944
Relevancy 99.33%

My touch screen has stopped working and I can see in the device manager that the HID-Compliant Touch Screen controller is greyed out. When I click on it is say: Currently, this hardware device is not connected to the computer. (Code 45)To fix this problem, reconnect this hardware device to the computer.Can anyone help me fix this please?Thank you 

A:Touch Screen on Envy TS 4 stopped working

Hi @Monty007, Welcome to the HP Forum! It is a terrific place to find answers and tips! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide: First Time Here? Learn How to Post and More What is your exact model of Envy 4 Sleekbook? HP Notebook PCs - How Do I Find My Model Number, Serial Number or Product Number? I understand that  your touchscreen is not responding.  It is listed in Device Manager under HID but it is grayed out with code 45,(Currently, this hardware device is not connected to the computer) . Here is a link that I believe may help with this issue: HP Notebook PCs - Touch Screen Issues (Windows 8) Please let me know the outcome. Thanks for being a part of the HP community. Please let me know if this helps resolve the issue by marking this post as "Accept as Solution". If you require further assistance, let me know and I will gladly do all I can to help. If you wish to say "thanks" for my efforts, click the "Thumbs Up" to give me a Kudos.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Touch-Screen-on-Envy-TS-4-stopped-working/td-p/5662532
Relevancy 99.33%

My touch screen has stopped working and I can see in the device manager that the HID-Compliant Touch Screen controller is greyed out. When I click on it is say: Currently, this hardware device is not connected to the computer. (Code 45)To fix this problem, reconnect this hardware device to the computer.Can anyone help me fix this please?Thank you 

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/Touch-Screen-on-Envy-TS-4-stopped-working/td-p/5662532
Relevancy 99.33%

Hello, I bought an HP Envy 15-J170us laptop which now has a cracked touch screen. I don't know how it got cracked, I put it in my padded PC backpack and set it in the back of my car, with nothing on top of it, and when I opened it up it had several cracks in the display radiating from one of the microphone holes (at least I assume it those are microphone holes) in the top of the glass. If this could be covered by my warranty it would be great, but if not, I need to know how I can get the touch screen replaced. Thanks, Mathew Pierce 




I am an HP employee.








Solved!
View Solution.

A:Envy 15-J170us cracked touch screen

If you purchased accidental damage protection plan, then this would be covered as a part of this plan. This is not covered as a part of standard warranty. You can go to Manuals section and download the Maintenance and Service Guide which has the part number and the procedure to replace the screen: http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?prodTypeId=321957&prodSeriesId=5354982

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Envy-15-J170us-cracked-touch-screen/td-p/4410766
Relevancy 99.33%

I had disabled the HID-compliant touch screen driver some time ago It was working fine then now that I have re-enabled it touch screen is not responding at all nbsp I have tried reinstalling the driver perfomed the system updates callibaration of the touch input from table pc settings perfomed a touch screen diagnostic test in HP nbsp Hardware Diagnostic UEFI but the problem is not resolved I have tried all of the steps except step and which asked for system restore and recovery from the following link -http support hp com us-en document c nbsp I want to know if there is any way that I can get my Touch is HP screen envy not m6-K015dx working touch screen working without performing system reset as I have some important softwares running and dont have an external drive to backup my data in case of factory reset nbsp Note Also I am unable to install a fresh copy of windows as I have forgotten BIOS password halt code show in

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Touch-screen-is-not-working-HP-envy-m6-K015dx/td-p/5635527
Relevancy 99.33%

Bought a brand new Envy last Thursday, touchscreen did not work.  Called support and they remotely worked on it for a few hours ultimately having to restore to factory settings, still did not work.  Exchanged laptop at store yesterday and the touchscreen on this one does not work either.   Per the sales person at the store the touchscreen should work with computer in laptop or tablet mode, is this correct? Is there a known issue with these that I should choose another model?   Is there something that has to be enabled?  I have checked the drivers and all is newest version and enabled. Thanks for any help.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/hp-envy-x360-touch-screen-not-working/td-p/5763122
Relevancy 99.33%

Please help! The touch screen on my Envy laptop no longer works. I've tried restarting and shutting off, but to no avail. When I go to PC Info, it tells me that: "No pen or touch input is available for this display." This is obviously incorrect, because my laptop is, in fact, a touch screen. I haven't installed any programs that would have affected the feature. Thanks,Jerry

A:HP Envy TouchSmart 15 - touch screen not working

Hi Jerry, Welcome to the HP Forums!I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your touchscreen is not functioning.  When you looked in PC info, you see "No pen or touch input is available for this display" I suggest you uninstall and delete the display driver. I would reinstall with the original driver and then run The HP Support Assistant to do updates.   Here is a link to assist you with reinstalling the original driver.  Using Recovery Manager to Restore Software and Drivers (Windows 8). If you would like further assistance, would you provide your exact model of Envy 15 Touchsmart you have and the Operating System you are running and if it is 32 or 64 bit.How Do I Find My Model Number or Product Number

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/HP-Envy-TouchSmart-15-touch-screen-not-working/td-p/3948594
Relevancy 98.47%

My Ideapad S415 touch screen has suddenly stopped working.  I've had a tech connect to my PC and try a BIOS reload of default settings, plus unistalling all "HID" devices in Device Manager with no resolution.  I've also tried a system restore with no luck. The system properties does see the touch capability. Suggestions? Thanks.










Solved!
Go to Solution.

A:Ideapad S415 Touch - touch screen stopped working

hi Hersh,
 
Welcome to Lenovo Community Forums!
 
First do a Power Drain 
     (If the battery is removable)
            Remove AC and Battery and hold the power button down for 15 sec.
               Turn the computer back on and see if the Touch capability is now detected under System Properties,
                  If not
         I suggest you contact Lenovo Technical Team about the Issue as this may be a device detection issue.
       Lenovo Technical Team
 
Regards
Solid Cruver



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

https://forums.lenovo.com/t5/Lenovo-U-and-S-Series-Notebooks/Ideapad-S415-Touch-touch-screen-stopped-working/td-p/1542316
Relevancy 98.47%

Tonight I upgraded from Windows 8 whereby my touchscreen worked perfectly to Windows 10 whereby my touchscreen on my HP Envy laptop is totally non-responsive. Is there a fix for this problem? Does HP have a new driver or software that will fix this problem? Is this a Microsoft problem that we have to wait until and update? I have read where others have experienced the same. I cannot imagine Microsoft not supporting touch screens since it is required in tablets, phones and many cross over laptops and computer monitors these days. Please help

A:HP Envy Touch Screen / Touchscreen dead after Windows 10 ins...

My HP Envy touchscreen is not working after the Window 10 install. Looking for direction also!

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/HP-Envy-Touch-Screen-Touchscreen-dead-after-Windows-10/td-p/5180174
Relevancy 98.47%

The touchscreen stopped working suddenly. At first i though it was like a normal failure and that will get fixed by turning the pc of or restarting so I did not pay attention to it until now that I had restart my pc multiple times. Currently running win10. I started to believe it was because of an update a few days ago since it was when the problem started. I have checked for the HID-compliant Touch Screen driver. 

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HID-compliant-touch-screen-not-working-HP-ENVY-TouchSmart/td-p/5747190
Relevancy 98.47%

It seems from the forum posts that there are many many people with the same issue, and no solution to the problem!  When will HP take responsibility for this issue and provide a solution? The issue is the "Touchsmart" screen is no longer responding to touch!!!  What's the point of a touch screen laptop if it does not respond to touch!!!! I have been through all the proposed solutions ... device manager... etc. etc... but still nothing... Under System: Pen and Touch it says: It says no pen or touch input is available for this display Please can HP help its customers resolve this issue?

A:HP Envy - Touchsmart Touch Screen Not Working - Windows 10

Hello @HP-Envy, Welcome back to the HP Forums! I came across your post and want to help you restore the functionality of the touchscreen on your HP ENVY TouchSmart m7-j120dx. This seems to be a driver related issue, but could be related to something else as well. To being, please perform a hard reset. Next, I recommend restoring the BIOS so the notebook will research the hardware that it has installed. HP Notebook PCs - Restoring the BIOS Once the BIOS restoration is complete follow the steps in this touchscreen troubleshooting document, I know you have completed most of the steps from it but doing it after the BIOS restoration is key. HP Notebook PCs - Touch Screen Issues (Windows 10)(If component tests is not an option in step four of that document, use the testing for hardware failures document) HP Notebook PCs - Testing for Hardware Failures (Windows 10, 8) I look forward to your reply with the results!

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/HP-Envy-Touchsmart-Touch-Screen-Not-Working-Windows-10/td-p/5564982
Relevancy 98.47%

I'm having the same problem as others with my HP envy 17. The left hindge has broken without any drops or setting it down to hard.

A:HP Envy Touch Screen left hinge broken

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details). If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-Envy-Touch-Screen-left-hinge-broken/td-p/5612979
Relevancy 98.47%

Hi My Envy start 23 not does envy screen touch blank smart - Smart Touch recently refused to start nbsp I search and did the recomended items to try and get it going again such as envy 23 smart touch does not start - blank screen Diconnect all devices disconnect power hold power button for sec power on with F key etc nbsp have performed this numerous times No luck nbsp I don't see the BIOS nbsp There is power as the hard drive light does do a short light and the DVD drive does make an initial sound nbsp Even tried a USN keyboard to see envy 23 smart touch does not start - blank screen if that would help nbsp I have even reset my CMOS with the jumper pins checked the battery unplug plug hard drive and other cords that attach to the motherboard nbsp Have reseated the RAM - tried to also boot with just one chip in nbsp Hard drive appears to be ok as I was able to browse its contects when I removed it and attached it to my smart TV Partitions and folders nbsp Still no response to the PC other than the quick LED HD light coming on and the quick LED light on the DVD drive nbsp -screen remains blank nbsp This PC is just now years old nbsp Anything else to try Thanks in advance Jim nbsp

A:envy 23 smart touch does not start - blank screen

My ENVY 23 Touch screen dioeds not start. I tried all the suggested steps that I could find... As we have two power cords exactly the same wattage, that has been tried as well... Ther light at the back comes on when the power cord is plugged in, but the start button coes not work. Unplugging and holding the start button down for 10 seconds and re starting does not work.Restartting with F10 key down does not work. Nothing seems to do the trick. It happenerd once before and I was able to restart it with a hard start (holding the power button down for 5-10 seconds with power cord off) and restarting. It did work about three weeks ago. Now it does not. Any suggestions?

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/envy-23-smart-touch-does-not-start-blank-screen/td-p/5573947
Relevancy 98.47%

the lcd backlight on my envy k204na appears to have failed......4 months out of warrenty! im not confident seperating the digitiser from the lcd panel and the cost of the complete unit is ridiculous, can i use a standard lcd screen, a third of the cost, to replace the existing screen? if so what is the part number i need. any advice greatly appreciated footnote: dont buy a touch unless you are absolutley sure you are going to use it.......or your loaded and can afford repairs/replacement!

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/replace-touch-screen-with-standard-lcd-envy-k204na/td-p/5847037
Relevancy 98.47%

HP ENVY TS Notebook PCProduct number E A UA ABAWindows -bitIntel R HD Graphics ENVY HP (ghost TS malfunction Screen clicks) 17 Touch System board KBC Version System bios F nbsp Good HP ENVY TS 17 Touch Screen malfunction (ghost clicks) day nbsp nbsp My screen was replaced very soon after purchasing my laptop dead pixels and I would like some confirmation that the HP ENVY TS 17 Touch Screen malfunction (ghost clicks) problem I am now experiencing is nbsp related to the hardware reinstallation nbsp before taking it back to the service center nbsp I did not experience this issue prior to the replacement nbsp During the boot into Windows or some times after a day of use the screen malfunctions with several visible nbsp ghost touches on screen I have the Show visual feedback when I touch the screen enabled nbsp The nbsp touch nbsp functionality is then disabled with the Windows nbsp Event Viewer System warning A multi-touch device reported inconsistent contact information nbsp nbsp Some times it is possible to reactivate the touch screen functionality by nbsp uninstalling nbsp the HID-compliant Touch Screen device driver and then scanning for new hardware nbsp Restarting usually nbsp resolves the issue but occasionally the system does not recognise the above driver and lists it as an unrecognised device in the USB controllers section of the Device Manager nbsp I ran the UEFI touch screen test a few times - it usually passes but there was one time when the touch screen was disabled and you couldn't run the test nbsp I have refreshed my PC but this did not help nbsp nbsp Any feedback would be appreciated nbsp Thanks

A:HP ENVY TS 17 Touch Screen malfunction (ghost clicks)

Hi Indy_za,  Welcome to the HP Forums!I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that after replacing the Touchsmart screen, you are getting ghost touches.  You did a refresh on your notebook, but it did not help. Here is  a link to assist you. Troubleshooting Touch Screen Issues in Windows 8/  I  hope this helps.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/HP-ENVY-TS-17-Touch-Screen-malfunction-ghost-clicks/td-p/4097426
Relevancy 97.18%

Hey everybody nbsp I just received my P last week as a replacement for another Lenovo device So far everything seems to work fine with one exception nbsp Pen... Touch P40 Yoga: ThinkPad / Touch Lenovo Screen When I turn the screen over to the tablet position the touch screen and the touch pen show erroneous behaviour a As soon as I make the first input with the touch pen I cannot make any further input with my finger so the touch input is simply turned off The Windows setting to ignore touch input when the stylus is used is not active b When I try to tap buttons at certain areas of the screen especially at the upper edge the cursor of the stylus starts jumping around and shows up at the lower edge of the screen That means that when I for example tap on the X symbol in the upper right corner to close a window I actually click on some of the symbols in the system tray in the lower right corner nbsp This problem stops occuring as soon as the angle between the two case parts screen and keyboard reaches exceeds approx It does not matter if Windows is in Tablet or Desktop Mode I already Lenovo ThinkPad P40 Yoga: Touch Screen / Touch Pen... tried to manually install another Wacom driver mentioned at https forums lenovo com t ThinkPad-S-Series-ThinkPad-Yoga Wacom-Tablet-Service-for-ISD-Driver-Win and https forums lenovo com t ThinkPad-P-and-W-Series-Mobile P -Yoga-issues td-p I had no luck trying driver versions and nbsp I would really appreciate your help since this issue makes working in the tablet position virtually impossible nbsp

https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/Lenovo-ThinkPad-P40-Yoga-Touch-Screen-Touch-Pen-Issue-in-Tablet/td-p/3480881
Relevancy 97.18%

I want to buy this mouse to better work with my laptop.
Can somebody give me some feedback on how this glas pane works instead of a scrollwheel? Handling, etc.

A:Logitech Touch Mouse 400 for a Laptop with no touch screen

Sorry I can't answer your question, but this post piqued my interest. I use the Logitech 620 touch mouse on a Windows 7 box at work. I find a little touchy and has to tweaked. But I haven't tried the 620 on Windows 8. Because I'm always looking for the perfect mouse, I think I might just pick up the 400 tonight and let you know.

http://www.eightforums.com/drivers-hardware/23647-logitech-touch-mouse-400-laptop-no-touch-screen.html
Relevancy 97.18%

The touchscreen stopped working suddenly on my Envy TouchSmart Sleekbook - dx At first i though it was like a normal failure and that will get fixed by turning the pc off or restarting so I did not pay attention to it until now that I screen- not touch touch... HID-compliant to working, use unable had restart my pc multiple times Currently running win I started to believe it was because of an update a few days ago since it was when the problem started but all drivers and everything is up to date I have checked for the HID-compliant Touch Screen driver and had to nbsp show hidden divices in order to find it I cannot enable it and when i check in the properties HID-compliant touch screen- not working, unable to use touch... the following message displays nbsp Currently this hardware device is not connected to the computer Code To fix this problem reconnect this hardware device to the computer nbsp I have no idea on how to connect or how it got disconnected I come from a similar thread but did not solve my problem I have been researching this for hours and have not found and answer Help please nbsp

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HID-compliant-touch-screen-not-working-unable-to-use/td-p/5747198
Relevancy 97.18%

Hello everyone, my touch screen on my lenovo ideapad z400 touch is not working anymore.  The only weird thing I remember is some ghost touchpoint on my screen. I've been looking for the answer to this issue, but it seems that Lenovo does not address this problem.  If someone has found the solution to this problem and wants to share it with me, I will be forever grateful.  

A:IdeaPad z400 Touch - Touch screen not working

I facing the same situation right now. any solution please. left side of monitor is being "touched"?

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/IdeaPad-z400-Touch-Touch-screen-not-working/td-p/2225587
Relevancy 97.18%

Hello,I am desperate for help. My laptop will turn on. And I can type in my password. But then when the computer loads it takes a very long time and when it gets to the desktop the keyboard, the mouse, the touchpad, and the touch screen won't work. I can see everything on my desktop. But I cannot open anything or do anything at all. How can I fix this?Thank you!!!

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Keyboard-mouse-touch-pad-and-touch-screen-won-t-work/td-p/5824972
Relevancy 97.18%

I bought new, but somehow do not want to workVideo is compared, apparently just enough to buy a new cable https://www.youtube.com/watch?v=cj5L-1l4qzI&feature=youtu.beI bought it herehttp://www.ebay.com/itm/Lenovo-Ideapad-S210-New-11-6-LED-LCD-laptop-screen-with-touch-glass-/1912932...
 
This is a new LCD
This is a broken LCD
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

A:Lenovo S210 Touch broken LCD and Touch screen

Hi Magnutus, welcome to the forums.
 
Please check if you Lenovo S210 is on warranty under with this tool.
After that you can open a ticket with Lenovo for the screen to be fixed, if it is not under warranty it will have a cost.
 
If you are the guys that like to fix it yourself (and it is not under warranty) I can recommend you to check the support site for your model, read the Hardware Maintenance Manual (on the documents area) and check how the machine is organized on the inside. On the parts lookup page you can find the parts number so you can find a replacements for the component that is giving you issues.
 
I hope this links helps you.
Regards
 
 
 
 

https://forums.lenovo.com/t5/Lenovo-U-and-S-Series-Notebooks/Lenovo-S210-Touch-broken-LCD-and-Touch-screen/td-p/1851801
Relevancy 97.18%

Hello nbsp My Thinkpad Yoga is connected to a large display through ThenkPad docking station nbsp screen generates touch while random touch lid... Yoga Its lid is closed nbsp During my work from time to time I see random touch clicks on my screen and random opening of menus nbsp It is clear that the touch screen is active Yoga touch screen generates random touch while lid... although the lid is closed nbsp When I open the lid and still connected just to the nd display large screen display the phenomena stops nbsp Worth noting is that although only the nd display shows an image the laptop touch screen is still sensetive to touch nbsp This is I guess why the random touches show up on the screen -- it feels the keyboard not fingers nbsp I expect the touch screen to be disabled while the lid is closed or when projecting only to the nd screen nbsp The solution of opening the lid while connected to the docking station is not acceptable nbsp Lenovo's local support suggestion to disable touch for the Yoga is also not acceptable -- people purchase Yoga to get Touch nbsp nbsp A solution please nbsp Yaron

A:Yoga touch screen generates random touch while lid...

I am experiencing the very same thing.A driver/BIOS update would be very much appreciated, dear Lenovo.

https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Yoga-touch-screen-generates-random-touch-while-lid-is-closed/td-p/1442843
Relevancy 97.18%

hello, my computer had a Windows update today, and now the touchscreen (which was fully functional before the update) is not working.  it is not the screen, as this happened once before to me and I did a system restore to fix it.  I tried a system restor this time, didn't work.  I looked in the Device Manager, and there IS NO DRIVER for my touchscreen.  how do I reinstall, it is NOT listed in the driver list on the HP website for my product.  help! Ivan

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/HP-ENVY-m6-n010dx-touch-screen-stopped-working-after-Windows/td-p/5748134
Relevancy 97.18%

My ENVY m6-AQ003 x360 touch screen function clicks itself. It clicks really fast in a straight vertical line. I havn't used it in a couple days so when I turned it on and it started clicking my first thought was the mouse was acting up or the touch pad. so I unplugged the mouse and restarted the computer. It continued to do it after the restart so I tried to turn off the touchpad. But the screen kept clicking before I could. Although it has stopped after i played around with it. It seems to keep doing it from time to time a few clicks. I know it is the touch screen function after I realized that the touch screen makes circles where you click and the mouse and touch pad don't. I hope there is a quick fix so I dont' have this problem when I travel in a few days.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/My-ENVY-m6-AQ003-x360-touch-screen-function-clicks-itself/td-p/5716545
Relevancy 97.18%

The laptop: HP Envy TouchSmart 15 Notebook PC (15-j173cl)Windows 8.1 Pro The problem: I use an external monitor, so my laptop is usually shut.  Randomly, my touch screen THINKS something is touching it, which disrupts whatever I'm doing.  I would like to disable the touch screen completely, as I do not use it at all. I thought maybe the latch wasn't closing properly, but the screen resolution changes when I shut the laptop, so it KNOWS it's closed and switches to the proper resolution for my external monitor, but it DOES NOT disactivate the touch screen, and some dirt or something is touching it, changing where my mouse is pointed, where I am typing, etc. I have tried cleaning the screen and keyboard with compressed air. The problem happens randomly; sometimes when I CAD for the day, sometimes after hours of working.










Solved!
View Solution.

A:Disable touch screen for HP ENVY TouchSmart 15-j173cl Notebo...

Hello, @rockspeak Welcome to the HP Forums.I see that you're looking to disable the touch feature in your notebooks display. I will help you with this. You can do this by going into Device Manager > click the + or > by Human Interface Devices > right click on HID-compliant touch screen > choose disable. This will have disabled the touch ability. Let me know if this works for you.Thank you for posting on the HP Forums.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Disable-touch-screen-for-HP-ENVY-TouchSmart-15-j173cl/td-p/4555674
Relevancy 95.46%

Hi, Just a quick question, we have one hp touch laptop model # 13-a200nx Pavilion series, and it touch has broken. I wanted to know can we replace its touch with non touch screen ? is there any availability?  Thanks

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Replacement-of-Touch-Screen-With-Non-Touch-HP-Pavilion-13/td-p/5817454
Relevancy 95.46%

I have a kiosk on which I've just installed 8.1 pro. It has an oem touch screen manufactured by General touch (p/n st6001u). I've installed the driver and it seems to work but Windows still says "no pen or touch available". My customers using the
kiosk will need to type on screen in addition to just clicking. Is there any way to for the OS into touch mode? I believe under 7 there was an option in Windows features but I can't seem to find anything on 8. Google has been no help.
Any ideas?

https://social.technet.microsoft.com/Forums/en-US/5292daf1-37a7-46c6-a940-9acb7b16d2c0/touch-screen-not-detected-as-a-touch-device?forum=w8itprohardware
Relevancy 95.46%

window 8.1 check pc info Pen and touch : No pen or touch input is available for this display No pen and touch in control panel I'm ready install drivers completed  how do I?

A:My desktop B50-30 Multi touch touch screen not wo...

Hi keerati,
 
Welcome to Lenovo Community Forums!
 
Check the Touch funtionality in OKR environment.
    Turn off the computer and Turn it back on and right away start tapping F2.
    Select Recovery. Once in the Recovery screen Test the touchscreen by touching any of the option if it will respond.

If the touchscreen works in OKR Environment, I suggest you perform a One key recovery (expect dataloss).
 
If the touchscreen still did not work in OKR Environment, I suggest you call Lenovo Technical Team for assistance.
 
Regards
Solid Cruver
 



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

https://forums.lenovo.com/t5/Lenovo-A-B-C-N-S-Flex-Horizon/My-desktop-B50-30-Multi-touch-touch-screen-not-working/td-p/2102387
Relevancy 95.46%

The touch-screen monitors are probably more expensive than your regular LCD Monitor...

A:Will anyone buy a touch-screen monitor just to use the touch feature?

http://www.newegg.com/Product/Product.aspx...N82E16824205010Just a little more expensive. I think I would get one?

http://www.bleepingcomputer.com/forums/t/187655/will-anyone-buy-a-touch-screen-monitor-just-to-use-the-touch-feature/
Relevancy 95.46%

I'm on the Driver Download page for the S400 Touch, but I have no idea which driver is for my touch screen.  There are display drivers and mouse/touchpad drivers, but neither of them say anything (at least I don't see it) about the HID touch screen.  Running Windows 7 64bit.  Any ideas?

A:S400 Touch - Driver for Touch Screen

Hi DJwhiteSquall,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are looking for the display drivers for your Lenovo S400 touch laptop.
 
As per the specification of this laptop  has AMD Radeon 7450M Graphics card, however please share the serial number of the laptop through private message as this help us to assist you in better way.
 
Click here to send the private message.   
    
Hope this helps. Do post back if issue persists!
 
Best regards,       
                                     
Ashwin.S




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

https://forums.lenovo.com/t5/Lenovo-U-and-S-Series-Notebooks/S400-Touch-Driver-for-Touch-Screen/td-p/2033027
Relevancy 95.46%

My client told me this was a touch screen, so that is what I ordered.  HP 749970-001 touch screen display assembly.It is installed, but not recognized.  In order to use it as a touch screen, would I have to replace the motherboard too?Is there a driver available?  The display works, it is just not working as a touch screen.




Sparky

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Can-I-upgrade-my-notebook-from-non-touch-screen-to-touch/td-p/5664763
Relevancy 95.46%

Touch screen on our HP Pavilion 23ST Touch All in One PC P2N42AVstopped working after about 6 months. I reimaged and restored it back to original system. To make sure nothing waschanged by any updates that may have been done.I cannot see any options in device manager for the touch screen.Everything else is working just fine but no touch screen functionality. doing F2 and trying component test. Touch screen isn't there.It is like it disappeared.   This id used in a business and it was working 18:00and the next morning nothing.

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/touch-screen-on-our-HP-Pavilion-test-Touch-All-in-One-PC/td-p/5732174
Relevancy 95.03%

Can we replace the capacitive touch controller or is it fixed?

A:Can one capacitive touch screen be replaced by a resistive touch screen?

Can you please provide more details?
What device do you mean?

https://forum.toshiba.eu/showthread.php?62803-Can-one-capacitive-touch-screen-be-replaced-by-a-resistive-touch-screen
Relevancy 92.02%

I bought a Lenovo G50-80 Touch Laptop, but for some reason the touchscreen is disabled and it also says that it doesn't have touchscreen on it.

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/G50-80-Touch-Touch-Screen-isn-t-working/td-p/3324184
Relevancy 92.02%

Hi All, some one pls help me.
1.  On my touch screen - left top corner the volume screen shown 0. This is reduced automatically.
2. The touch pad is not working - I am not able to move the cursor but can click where ever it is placed.
3. The keyboard on tablet mode is also not working.
 
this happened all of the sudden. Is there any virus or some issues with software. Pls help i am really need of a solution here.
 
Mod's Edit: Additional information added to Subject line for clarity of issue and moved posting to it own thread.
 

https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Touch-screen-and-Touch-pad-problems/td-p/3439796
Relevancy 92.02%

So I have got a Lenovo Y50-70 with 15.6" 3840x2160 UHD Touch Display for about two years now. I've accidentaly dropped my backpack, while the laptop was in it and cracked it's screen so I need to replace it. The screen in the cracked part is working as it was working before the accident, the crack is on the glass. So I was wondering if I can replace my 15.6" 3840x2160 UHD Touch Display with a 15.6" 1920x1080 FHD Non-touch Display? Is it possible?I've read that whether screen you are changing, its working depends on the quantity of pins on the Video signal connector. 

























14805592_1377320382293084_1940252874_n.jpg ?54 KB

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Replace-Y50-70-UHD-touch-screen-with-FHD-non-touch/td-p/3462229
Relevancy 91.16%

Yesterday I was on my laptop and before I shut it down it went into what looked like a different mode. I booted it up this morning and it is still in this mode. It looks like touch screen mode but I do not have a touch screen.  The icons on the task bar are spaced out and there is a back button on the task bar too which is not normally there. When i right click against the task bar, one of the buttons says "Show touch keyboard button".  All of my files are spead out as if to have room for touching if I had a touch screen but I do not. I am finding this very annoying because I cannot get onto my desktop properly and is not in the right mode. Please help! 

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/My-Laptop-isn-t-touch-screen-but-it-is-in-touch-screen-mode/td-p/5686333
Relevancy 86%

 So these are two pictures of my laptop and Im not sure what the problem is. Up until two days ago my laptop was fine and now it looks like this anytime I open it and then close it. I'm scared to even move it from my desk but I kind of need to seeing as I'm in college full time. Is there a way that this can be fixed or does anyone know why this is happening. I take great care of my laptop seeing as my entire life is on them for college and work. I need a remedy if there is one and fast because I have classes to get to and need my laptop. Any advise would be appreciated or if HP would like to fix it I would be happy about that too.

A:HP Envy 17' Touch Smart

@brj5454

 

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).

If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.

Thank you for visiting the HP Support Forum.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-Envy-17-Touch-Smart/td-p/5842545
Relevancy 86%

Please let me know if the Touchpad flaws on HP Envy 17t laptops mentioned in Forums (stopped working e.t.c.) are being fixed with the newly shipped laptops. I am avaiting the delivery of my new customized HP Envy 17t and hope that the touchpad will work properly. Appareently the updated touch pad driver and FIOS is required. Will my laptop be updated prior to the shipment?Many thanks for your help.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Touch-Pad-Issues-HP-Envy/td-p/5806599
Relevancy 86%

Hello Community nbsp Recently I've been having an issue with my notebook's wireless I'll try to summarize so please let me know if more information is required nbsp I've had my HP Envy for almost one year so far no issues I got the windows update last year and mostly everything is usually fine nbsp A few months ago I bought a Smart TV a LED TCL inch nothing fancy Reading the Notebook ENVY PC touch) 15 (not HP specs I saw that it supports miracast so I tried it with my HP Envy At first it worked perfectly then a few hours later it suddenly stopped working It HP ENVY 15 Notebook PC (not touch) seems like both the notebook and the TV can see each other but are unable to sync so it fails to connect every time nbsp But that is not the main issue although it may be related to it Ever since the miracast stopped working whenever I turn on the TV even if HP ENVY 15 Notebook PC (not touch) not on discovery mode or smart mode I just lose the wireless connection on my notebook the TV remains online and so does everything else in the room that requires wireless connection it just doesn't work for me until I turn off the TV nbsp It's driving me crazy and it is quite annoying having to ask to turn off the TV every time I need to use my notebook nbsp I have all the latest drivers installed and I've even ran a Windows reset to defaults still the issue remains nbsp Any suggestion Thanks

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/HP-ENVY-15-Notebook-PC-not-touch/td-p/5714114
Relevancy 86%

 So these are two pictures of my laptop and Im not sure what the problem is. Up until two days ago my laptop was fine and now it looks like this anytime I open it and then close it. I'm scared to even move it from my desk but I kind of need to seeing as I'm in college full time. Is there a way that this can be fixed or does anyone know why this is happening. I take great care of my laptop seeing as my entire life is on them for college and work. I need a remedy if there is one and fast because I have classes to get to and need my laptop. Any advise would be appreciated or if HP would like to fix it I would be happy about that too.

A:HP Envy 17' Touch Smart

@brj5454

  I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details). If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-Envy-17-Touch-Smart/td-p/5842543
Relevancy 85.14%

This has a built in CPU (i5) with Win7 32bit installed. The IDS touch screen was working fine, the it stopped
working. The thing is, the Touch screen calibrates fine using Elo calibration software for spotting the corners of the screen but when you do the mouse check, it does not recognize moving the cursor or selecting anything. I suspect a Win7 problem so where would a good start point be?

A:Elo 55" Interactive Digital Signage Touch Computer touch problem

Without knowing much about your system, I would say the first thing to look at is maybe update or reinstall your drivers.

http://www.sevenforums.com/hardware-devices/354469-elo-55-interactive-digital-signage-touch-computer-touch-problem.html
Relevancy 85.14%

I have an acer aspire M3 581T-6405 series ultrabook, but my screen is broken. Can I replace it with a touch screen from an Acer Aspire M5-583P-6428? Whether the touch screen works as a touch screen or not is irrelevant I just want to be able to use my laptop.

http://community.acer.com/t5/E-and-M-Series-Laptops/Replacing-a-non-touch-screen-with-a-touch-screen/td-p/456065
Relevancy 84.71%
Relevancy 84.71%

I have an envy m touchscreen that is giving me problems that i can't solve It has been great up until recently i was using my laptop last nite when suddenly it turned off but i turn m6 won't ultrabook on touch envy didn't think that the battery shoukd have been dead yet its acting as if the bat is empty and plugging it in just turn on the orange led by the power plug when i press the power button it flashes for a second but the screen does nothing and it doesn't actually turn on I'm using my phone to attempt to find a solution atm which is very frustrating adding to the stress envy m6 ultrabook touch won't turn on is the fact that i have school work projects and a midterm project on it that I need to finish Almost forgot to mention it started doing a few other odd things over the last week such as the touchscreen going nuts registering phantom touches endlessly until i close hibernate shutdown it Solved View Solution

A:envy m6 ultrabook touch won't turn on

Ok thank you. i was hoping that there might be some little trick i had not encpuntered yet but was afraid that it really is just a hardware issue and requires calling in. i will try to do that today if possible

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/envy-m6-ultrabook-touch-won-t-turn-on/td-p/4673338
Relevancy 84.71%

The hinges are detaching from my laptop and the screen cover is cracked by the hinges from wear from the broken hinges. I need to get this repaired and cannot contact anyone fro HP for the life of me. This has been the most difficult support system iI have ever come across. I need to send my laptop somewhere to get the screen cover and hinges replaced.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Broken-Hinge-On-Envy-15-touch/td-p/5661166
Relevancy 84.71%

nbsp nbsp nbsp I purchased my HP Envy in early July of this year at Best Buy In hours the touchpad began to give me grief It would open the side panel that shows you how many programs are open at the momnt cause the mouse to jump around when I used it would not respond to clicking nd just generally not work I did everything under the sun that I could think about to the pc I uninstalled the drivers uninstalled the entire touchpad reset my pc to factory settings Issues Touch m6 n010dx HP Pad Envy to no avail Within five minutes of turning on the pc the mouse acted up nbsp nbsp nbsp I nbsp returned the laptop to Best Buy in two days and received the same model A few days later I faced the same exact issues This is the laptop that I currently have I thought I could live with it but I am at my wits end nbsp nbsp nbsp I will note that when I have an external mouse plugged into the laptop the mouse gives me no trouble whatsoever nbsp I have an HP Envy M -n dxI'm running Windows x bit Solved View Solution

A:HP Envy m6 n010dx Touch Pad Issues

Hello @Leah_anais  and @sirdoom34 , Welcome to the HP Forums! I understand you're having issues using the touchpad on your ENVY notebooks. Please take the time to go through the following document for touchpad issues: Using and Troubleshooting the TouchPad or ClickPad (Windows 8). Make sure the touchpad is up to date with the following drivers: Synaptics TouchPad Driver. If neither of those work please contact HP Phone Support for service options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.Thanks!

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-Envy-m6-n010dx-Touch-Pad-Issues/td-p/4460334
Relevancy 84.71%

Hi, I have bought HP Envy Notebook 17T recently in US. But from start Touch was not working and I thought that this laptop doesnt support Touch. But after reading several post I found that this laptop supports Touch, but somehow the drivers are missing and I am not able to find the drivers for this Touch screen. In Device Manager, under "Human Interface Devices", I could only find "HID-complaint wireless radio controls" and "HP Wireless Button Driver". I didn't find any other options to enable touch in my Laptop. Please find the below screenshot for reference.  Please assist me in making the touch screen working at the earliest. I have spoke to HP Customer care and they registered a case reference number as well. Please see the reference number "3027751069" for more details on the conversations. Please do the needful. Thanks,Vinoth Karunanithy

A:HP Envy Notebook 17T touch is not working

Hi there @VinothK,  Welcome to the HP Support Community! I read your post and wanted to reach out to help you! Could you please provide me with your Model Number (How Do I Find My Model Number or Product Number?) so that I can assist you better?Here is a link to the HP Support Assistant. Please download and run the application and it will help with the software and drivers on your system that need updating. Have you done all of your Windows Updates?Have you tried to find new hardware in the device manager?Have you downloaded or installed any new tool or programs?  Have you tried to run the Windows Troubleshooter?Have you tried to Perform a hard reset?Have you tried to Update the BIOS and graphics driver?Have you tried to Perform a touch screen diagnostic test in HP Hardware Diagnostics?Have you tried to Configure the touch display? Did this reply resolve your issue or answer your question? If yes, then please share the good news! Let others know this reply was helpful by clicking the Accept as Solution button. You can also show your appreciation by clicking the Thumbs Up. If you require further assistance, I would be more than happy to continue to help you. Please re-post with the results of the troubleshooting. Thanks!Have a great day! 

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/HP-Envy-Notebook-17T-touch-is-not-working/td-p/5595295
Relevancy 84.71%

How to quickly disable touchpad on HP ENVY 15t-j000?   I just got one of the newest Haswell notebook.  With older HP laptop touch pads there is a spot at the upper left corner to disable the touchpad.  With the latest Synaptic touchpad on the new ENVY 15t there is no keyboard or touchpad button to disable the touchpad when you are using a mouse. Please advice.











Solved!
View Solution.

A:disable touch pad HP ENVY 15t-j000

Hi Unfortunately there is no keyboard shortcut for turning the touchpad for this model.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/disable-touch-pad-HP-ENVY-15t-j000/td-p/2997369
Relevancy 84.71%

I purchased a HP Envy 13 laptop in January 2016 with a Windows 10 operating system. It has always been hot to touch at the top part of the keyboard by the on/off button but today has started with a whirring sound that I am assuming is the cooling fan.  Please can you let me know what I need to do about this. Many thanks

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-Envy-13-hot-to-touch-and-noise-from-cooling-fan/td-p/5619941
Relevancy 84.71%

Hi, Sorry if this is't the right section to post this question. I am thinking about buying a new computer and I am interested in the following computer: HP ENVY All-in-One Desktop - 27- b025se touch This is already on sale in the US; does any one know when this product goes on sale in the UK? Thanks in advance,Aidan 

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/HP-ENVY-All-in-One-Desktop-27-b025se-touch/td-p/5850252
Relevancy 84.71%

Looking to upgrade the DVD player to a blu ray player or maybe even a blu ray burner. Have seen other Service manuals for other laptops on here that include this information but not one for the  HP Envy 17t  T8B50AV_1 Any help would be appriciated.

A:Add a Blu Ray player to a HP Envy 17t Touch T8B50AV_1

@2006Jackpot? To better help you we would need the exact model number or product number of your laptop/desktop??? http://support.hp.com/us-en/document/c00033108 REO

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Add-a-Blu-Ray-player-to-a-HP-Envy-17t-Touch-T8B50AV-1/td-p/5704659
Relevancy 84.71%

Haven't updated your laptop's trackpad driver lately? Then you may well want to consider doing so, at least if your laptop is equipped with a Synaptics trackpad. As a user on the Hardware Zone forums discovered, the latest Synaptics driver seems to enable multitouch gestures on older laptops that didn't previously support them, including two-finger scrolling, and three-finger click. What's more, while the drivers themselves come from HP, they should work just fine on other laptops with a Synaptics trackpad. Hit up the link below to try it out for yourself.
Source: Synaptics driver enables multitouch gestures on older trackpads -- Engadget

p.s. working on my P7805u perfectly.

Download directly from HP:ftp://ftp.hp.com/pub/softpaq/sp47501-48000/sp47815.exe

A:Touchpad Driver that Unlocks Multi-Touch on older Touch

Thanks for posting this Martee I'm sure it will be of use to other members. Just one question am I the only one that can't get the download link to work? Fabe

http://www.sevenforums.com/drivers/73567-touchpad-driver-unlocks-multi-touch-older-touch.html
Relevancy 84.71%

I have a friends laptop that the synaptic touchpad gets extremely hot and PC doesn't reconize it. Vista 32 home basic, have downloaded drivers and to no avail. doesn't even recognize a mouse plugged into a USB.
 

Relevancy 84.28%

I ve had this machine about stuck Inspiron or 11 pad--warranty parts on touch button (touch) week old 3558 3000 broken replacement? New about a week so far I really like it nbsp Can t say yet that I love it yet but it does what I need it to and the price is better than a tablet with the same functions and already has a keyboard nbsp This New week old Inspiron 11 3000 3558 (touch) stuck or broken button on touch pad--warranty parts replacement? machine is kept in a padded case when not used in my desk drawer it does not bounce around in my briefcase etc nbsp This morning the New week old Inspiron 11 3000 3558 (touch) stuck or broken button on touch pad--warranty parts replacement? left button on the touch pad does not work nbsp At first glance it sort of looks like it is caught on something or stuck the right button New week old Inspiron 11 3000 3558 (touch) stuck or broken button on touch pad--warranty parts replacement? works great a broken switch under the button is also possible but this thing doesn t move at all I d think a switch would still move just not contact properly inside nbsp I need my machine and I ve made a couple of upgrades like a SSD for the stock hard drive and a gig ram chip I am not thrilled about pulling those components in order to return for warranty replacement etc as I m pretty sure you won t be returning the same machine I sent in nbsp I m considering pulling it apart to see if it is indeed stuck so it can be pushed back out from the inside but if this is a common issue with this machine I d like to know that nbsp Can I be sent a new touch pad component I believe I saw this is a separate board that attaches to the motherboard with a ribbon cable nbsp I m not afraid of this procedure myself as I ve been building desktops since the s and this is a really simple hardware to work on from the looks of it nbsp Only thing I fervently wish this motherboard had is a second wireless socket for a cellular internet card it s currently wifi only nbsp Sigh I guess you can t have everything for the price level of this machine nbsp Looks like I have to settle for a stick or one of those wifi router things that connect to the cell data network and your computer accesses that router with wifi If dell can please send me a replacement touchpad board please do I am afraid to try to pry the button loose from the outside because there is such a tiny amount of space there and I d probably damage the plastic around the touchpad trying to pry it free nbsp I don t think anything got into the touch panel again because there s such a tiny amount of clearance here nbsp Thank heavens this is a touch screen don t need the touch pad for a lot of things and I can add a mouse but that just makes for more stuff to carry around would like this fixed nbsp I guess your chat is never open I ve tried a few times and it s always closed nbsp I imagine you d want the service tag on the machine I d prefer to supply that in a private communication as there is no telling what someone may try with that information nbsp

A:New week old Inspiron 11 3000 3558 (touch) stuck or broken button on touch pad--warranty parts replacement?

This is an fyi about the final resolution of this issue.  After a lot of arguing dell sent me what was supposed to be the touchpad but what I got was only the plastic palmrest no touchpad. Then because it's a "daughter card" I got more argument about the touchpad.  I got hot enough that I opened up the back, lifted out the battery, took out the two funky looking screws and the whole pad just fell right out of the machine.  The buttons seemed fine so I screwed it back down, put the battery back in and closed it up.  It's now great, the button was indeed hung up on the edge of the plastic palmrest.  This is a very well designed inside machine, it all screws down and all connections are with plugs or ribbon cables.  I wrote back to dell and told them they need to fire their tech manual writers because they're idiots, a monkey could have done this.  Apparently it is not easy to find only the mouse pad it's generally sold with the palmrest from what I can tell.  This whole machine is so well designed I scratch my head why the cpu isn't socketed unless they decided there was no room for a socket etc, which I can see that argument.  So if your mouse pad quits try popping it out first it may just be hung up.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19682498
Relevancy 83.85%

Hello all, I have HP ENVY 15T AE000 CTO (Touch) laptop. Mine is working just fine but since its now out of warranty period I was thinking of upgrading the display on the laptop. Currently I have 1366x768 resolution display. I want to upgrade it to the 1920x1080 (FHD) display. I have referred the manual for my laptop and found that the part number for the display 812690-001 for the FHD screen.I checked on the hp parts website but this one costs almost $500. Is there any alternative for this? and most importantly can I do it? I have replaced parts on the laptop before so getting this done with the instructions won't be an issue. The issue is the price of the parts. Is there any other cheaper option for 1920x1080p matte display?I would really appreciate some help.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Can-I-replace-my-HP-ENVY-15T-AE000-CTO-Touch-display-with/td-p/5765941
Relevancy 83.85%

I Buy the HP Envy 15t Touch (model 15t-ae009tx) with the i7 processor and 4 GB discrete graphics memory. The Maintenance and Service Guide states that there is an M.2 slot available for a SSD.If I Find M.2 SSd They Have Diffent Size Can Anyone Please Tell Me Which Size SSd My Laptop SportSmall M.2 Or Mediam M.2 Or Larg M.2 Secound Qustion Is How Much Ram Sport My Laptop Just 16Gb Or More Then 16 GbAnd Last Qustion Is How Much HDD Hard **bleep** Sport My Laptop Just 2tb Or More Then 2 Tb Please Help Me Any One   

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/M-2-SSD-question-for-HP-Envy-15t-Touch-model-15t-ae009tx/td-p/5664037
Relevancy 83.85%

I recently on 8/2014  purchased a HP envy for my son who just started college, He has been using the laptop gently and has had no falls or intentiontally caused physical damage to it.  A few months ago , the hinge and the part of the case attached t the left hinge broke and he is very disappointed.  I have used HP products for a long time and thought this will be a good tiime to introduce them to him, but he is very disappointed and so am I.  After research, I realize this is a know problem and many other users have had issues.  The laptop is still functional as long as it is left open. Please helpThank you.   

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Hinge-and-case-broken-Hp-envy-touch/td-p/5733212
Relevancy 83.85%

I have the HP Envy x360 m6-aq003dx. and the touch keyboard will not open in tablet mode.  Clicking the touch keyboard button on the bottom right doesnt open it either.  What do I do?

A:HP envy x360 Touch Keyboard won't open

Hi Hi @Chess1170, Thank you for posting your question in the HP community, a great place to get support and resolutions to your questions. I read your post about the computer touch keyboard not working in tablet mode. I am more than happy to be at your service. First off, I am glad that I have the privilege to work with a tech-savvy customer. I found a great response on HP forums authored by Photoray002 a certified HP Forum specialist. This is an accepted solution too. I will share that link with you. Link: http://hp.care/2cIa28JPlease check this link also from HP forums to try and resolve the issue: http://hp.care/2cIbh7RThere is an associated youtube video link for it in the second link.  Do let me know how this goes. To simply say thanks, please click the "Thumbs Up" up button to appreciate my efforts. If this helps, please mark this as ?Accepted Solution?. If you require further assistance let me know and I will gladly do all I can to help.Take care now and do have a pleasant week ahead.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-envy-x360-Touch-Keyboard-won-t-open/td-p/5761837
Relevancy 83.85%

How do I upload videos off my sd card to the envy touch desktop so I can upload them to  YouTube? Is there a easier faster way to create videos for YouTube using the envy touch desktop? Any help is appreciated 

A:How to upload videos from sd to hp envy touch desktop

1. Insert the SD card into the SD slot on the device you are using.2. If auto run fails to open the card, then open My computer and double click on the drive for the SD card3. Open the folder containing the pictures4. Select the pictures you want to copy, and then right click the mouse and chose copy5. Open your Picture library, and then right click the mouse and chose paste to copy them into the library.  




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/How-to-upload-videos-from-sd-to-hp-envy-touch-desktop/td-p/5629480
Relevancy 83.85%

I'm just wondering why my new Envy x is still in Processing after days When I know it doesn't take that long to test I also know that by PM EST it is - AM the next day in most of China Touch - Processing ENVY Still x360 Order HP 15t The only change to the standard build is the UHD display Since the display is the only real possible change to the standard config then there should be some already built like that Also since I didn't have any software services added it should be Order Still Processing HP ENVY x360 - 15t Touch just off the shelf F Y I IT support and services is what I do for a living and am employed by a HP Partner nbsp HP ENVY x Convertible Laptop HP ENVY x - t Touch nbsp Laptop TB rpm SATA Order Still Processing HP ENVY x360 - 15t Touch GB M SSDFull-size island-style backlit keyboardSecurity Software Trial GB DDR - SDRAM x GB Intel ac x Wi-Fi and Bluetooth ComboOffice Software TrialWindows Order Still Processing HP ENVY x360 - 15t Touch Home diagonal UHD IPS UWVA edge-to-edge glass x Touchscreen for HD Camera HP Wide Vision HD Webcam with Dual Digital Microphone -cell WHr Lithium-ion BatteryIntel Core i - U GHz up to GHz MB cache cores Intel Iris Graphics

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Order-Still-Processing-HP-ENVY-x360-15t-Touch/td-p/5680291
Relevancy 83.85%

My X tablet comes with pen and limited touch support with touch points I have no issues on windows but on windows it has changed to be working with on ... X220 tablet one working Only touch touch point only touch point since nbsp some time nbsp that I don't remember exactly when So that I Only one touch point working on X220 tablet touch ... can work with one finger only and -finger functions Only one touch point working on X220 tablet touch ... such as pinch to zoom are unavailable nbsp My drivers are all uptodate I think I should completely uninstall the related driver before reinstalling but don't know how to procede and couldn't find the solution nbsp I tried uninstalling all HIDs through nbsp Device manager and one-by-one specifically wacom device when I uninstall it I lose touch option completely but reinstalling through Device Manager sounds like recovering exactly the previous faulty condition Maybe there is a conflict with windows like Microsoft Input nbsp Configuration Device which might be unlikely nbsp nbsp So is there any other way to have full wipe and clean reinstall of those touch screen drivers I appreciate it if you put links to the drivers for me if they are not available on Lenovo Support nbsp Tell me if you had the same touch issue in Windows nbsp and how you solved it nbsp Thanks nbsp Device manager JPG KB

https://forums.lenovo.com/t5/ThinkPad-X-Series-Tablet-and/Only-one-touch-point-working-on-X220-tablet-touch-screen/td-p/3359672
Relevancy 82.99%

I own a HP Envy 15t Touch (model 15t-ae100) with the i7 processor and 4 GB discrete graphics memory. The Maintenance and Service Guide states that there is an M.2 slot available for a SSD. When I opened up the laptop, I found what appears to be the ssd port (labeled jssd1) but no ssd connector. Why is there no connector? See attached picture of motherboard. ThanksSam  

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Missing-SSD-connector-for-HP-Envy-15t-Touch-model-15t-ae100/td-p/5655655
Relevancy 82.99%

I am having the exact same problem as everyone else previously post here from 2014. Both hinges on my laptop broken which causing the top and bottom case to seperate. Repalce screw and super glue is not help. I can't really snap back in place. Please advice for replacement. Otherwise, very happy with the performance. 

A:HP Envy Touch Smart 15 laptop hinges broken

@ThinhBui

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).

If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.

Thank you for visiting the HP Support Forum.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-Envy-Touch-Smart-15-laptop-hinges-broken/td-p/5602326
Relevancy 82.99%

I'm just wondering why my new Envy x is still in Processing after days When I know it doesn't take that long to test I also know that by PM EST it is - AM the next day in most of China The only change to the standard build is the UHD display Since the display is the only real possible change to the standard config then there should be some already built like that Also since I didn't have any software services added it should be just off the shelf F Y I IT support and services is Laptop x360 Touch Processing ENVY - 15t Slow HP what I do for a living and am employed by a HP Partner nbsp HP ENVY x Convertible Laptop HP ENVY x - t Touch nbsp Laptop TB rpm SATA GB M SSDFull-size island-style backlit keyboardSecurity Software Trial GB DDR - SDRAM x GB Intel ac x Wi-Fi and Bluetooth ComboOffice Software TrialWindows Home diagonal UHD IPS UWVA edge-to-edge glass x Touchscreen for HD Camera HP Wide Vision HD Webcam with Dual Digital Microphone -cell WHr Lithium-ion BatteryIntel Core i - U GHz up to GHz MB cache cores Intel Iris Graphics

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/HP-ENVY-x360-15t-Touch-Laptop-Slow-Processing/td-p/5680291
Relevancy 82.99%

HP ENVY 15t Touch laptop. Upgraded from Windows 8 to Windows 10 64 bit.  Laptop can be used when plugged in to outlet. Battery charge always shows at 10% charge and shows plugged in, not charging.  Is this issue with power adapter or battery ? Please help troubleshoot the issue.  Any help is much apreciated. Thanks NP

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-ENVY-15t-Touch-Laptop-battery-plugged-in-not-charging/td-p/5702889
Relevancy 82.99%

I'm just wondering why my new Envy x - Laptop 15t HP x360 Touch Processing ENVY Slow is still in Processing after days When I know it doesn't take that long to test I also know that by PM EST it is - AM the next day in most of China The only change to the standard build is the UHD display Since the display is the only real possible change to the standard config then there should be some already built like that HP ENVY x360 - 15t Touch Laptop Slow Processing Also since I didn't have any software services added it should be just off the shelf F Y I IT support and services is what I do for a living and am employed by a HP Partner nbsp HP ENVY x Convertible Laptop HP ENVY x - t Touch nbsp Laptop TB rpm SATA GB M SSDFull-size island-style backlit keyboardSecurity Software Trial GB DDR - SDRAM x GB Intel ac x Wi-Fi and Bluetooth ComboOffice Software TrialWindows Home diagonal UHD IPS UWVA edge-to-edge glass x Touchscreen for HD Camera HP Wide Vision HD Webcam with Dual Digital Microphone -cell WHr Lithium-ion BatteryIntel Core i - U GHz up to GHz MB cache cores Intel Iris Graphics

http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/HP-ENVY-x360-15t-Touch-Laptop-Slow-Processing/td-p/5680291
Relevancy 82.99%

I have the exact same problem described on many discussion boards.   Envy 17  - the corner of the case is spreading apart. Closed, I can press it back together, but when opened the corner pops open again.  It seems to get worse every time it's opened. Note also, the hinge on that side (left) looks like it is sitting lower than the right when open.I've read TONS of this complaint on the Internet. Is it true that these hinges are GLUED in place? Has this been officially recognized as a design flaw by HP yet? Has there been a warranty extension issued? This seems to be a very widespread problem. Thanks!

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-Envy-Touch-17-casing-separating-at-left-hinge/td-p/5611984
Relevancy 82.13%

Hi all

I have at present 4No monitors all working ok except for the touch aspect.
I can get the touch working on one of the touch screens but not the other.
monitor confifuration are
[touchscreen][ordinary screen][ordinary screen][touchscreen]

basically a touch screen has a mouse enabled via the usb connection.
I can flip the touch from either side by changing the primary monitor status.

I the tablet mode the "make windows more touch-friendly when using your device as a tablet" this is disabled.
also if i go into control panel and search for tablet there should be a function "tablet that will let me select which monitor is a tablet.

Any help would be greatly appreciated.

http://www.tenforums.com/drivers-hardware/60706-4-monitor-rig-includes-2-touchscreens-second-touch-no-touch.html
Relevancy 82.13%

Hi! Kindly please help me troubleshoot my Hp envy notebook. I am having a hard imenusing since I bought it 4 months ago.1. wifi keeps turning off and it takes time to turn on.Only airplane mode appears in the network connection.2.the battery will easily to consume eventhough I always shut it down properly.3. there was an instance the touch pad function didn't worked(zoom in and zoom out)I am hoping for your immediate response of the above issues.Thank you.

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Hi-my-laptop-is-HP-envy-notebook-s-wifi-battery-touch-mode/td-p/5621079
Relevancy 82.13%

I'm just wondering why my new Envy x is still in Processing after Order Laptop HP Touch x360 15t Processing ENVY Slow - days When I know it doesn't take that long to test I also know that by PM EST it is - AM the next day in most of China The only change to the standard build is the UHD display Since the display is the only real possible change to the HP ENVY x360 - 15t Touch Laptop Slow Order Processing standard config then there should be some already HP ENVY x360 - 15t Touch Laptop Slow Order Processing built like that Also since I didn't have any software services added it should be just off the shelf F Y I IT support and services is what I do for a living and am employed by a HP Partner nbsp HP ENVY x Convertible Laptop HP ENVY x - t Touch nbsp Laptop TB rpm SATA GB M SSDFull-size island-style backlit keyboardSecurity Software Trial GB DDR - SDRAM x GB Intel ac x Wi-Fi and Bluetooth ComboOffice Software TrialWindows Home diagonal UHD IPS UWVA edge-to-edge glass x Touchscreen for HD Camera HP Wide Vision HD Webcam with Dual Digital Microphone -cell WHr Lithium-ion BatteryIntel Core i - U GHz up to GHz MB cache cores Intel Iris Graphics

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/HP-ENVY-x360-15t-Touch-Laptop-Slow-Order-Processing/td-p/5680291
Relevancy 82.13%

Malygris I have a Envy AIO desktop pc updating after hp envy Boot touch drivers smart problem nbsp Model No d la product No H X AA AC nbsp It was recently upgrade to Windows nbsp It powers on but has a black screen nbsp Can't even get the bios screen to appear nbsp Tried various online support articles for resetting bios without being able to see the screen nbsp Nothing seems to Boot problem hp touch smart envy after updating drivers work nbsp PC powers on HDD drive light comes on briefly processor fan stays on white power light next to power port green light on power supply nbsp Lights on keyboard never flash when powered on nbsp i have reseated the ram card and I have replaced the bios battery nbsp I have tried hp diagnostics on a flash drive nbsp Nothing will appear on the screen nbsp I don't want to get recovery disks only to find out that I still can't get anything on the screen nbsp Any help would be greatly appreciated nbsp I did what are you suggesting nbsp HP Desktop PCs - Computer Does Not Start Windows nbsp but ist not working nbsp I have the same problem

A:Boot problem hp touch smart envy after updating drivers

Hi there @Leo89, Welcome back to the HP Support Forums! I understand that you have already tried the computer does not start process and the screen is still blank.  I am happy to assist you with this. In following the Computer Does Not Start document, did you end up at this one: HP and Compaq All-in-One and HP TouchSmart Desktop PCs - Screen is Blank after Starting the Computer, specific to All-in-One computers?  If not then give it a try. If at the end you are still getting no display then you will need to contact Hp Phone Support, as it seems there is a hardware issue somewhere. Please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html I look forward to seeing your response, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Boot-problem-hp-touch-smart-envy-after-updating-drivers/td-p/5590477
Relevancy 82.13%

Does anyone know what the part number is for the DC Jack? I can't find a useful manual on HP's website. 

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-envy-m7-n101dx-DC-Jack/td-p/5703012
Relevancy 80.41%

Hello all, The battery that came with the machine states its a MC04 model or part number 807231-001. I can't find a replacement anywhere, not even in the HP Store. I would like to know which are the options available to replace this battery, capacities, etc. Thank you for your time.

A:envy m7-n101dx - battery replacement options

Hi, You can order from the following store:      http://partsurfer.hp.com/Search.aspx?SearchText=M1W07UA or      http://www.compareelectronicsprices.uk/product/hewlett-packard-807231-001-battery-41wh-original/b01i...      https://www.ipc-computer.eu/notebook-ersatzteile/akkus/akku-807231-001 Regards.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/envy-m7-n101dx-battery-replacement-options/td-p/5789559
Relevancy 79.12%

I can move the pointer, but I can't click anything. If I right click, it's like the left-click button is being held down and I can't click anything on the menu. A USB mouse works.

Thanks in advance, SawronZXZ~
 

Relevancy 79.12%

Touch mat wont let me use the touch only the mouse and the light stays on even when not in sprout workspace

A:touch mat not woring with touch only can use mouse

Hi @frostygirl13, and thank you for your post.Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. My understanding of your post is that you are dealing with two issues, one, the projector lamp is on, when you expect it to be off, and two, the touch mat is not working for you. I am happy to give you a hand with this. For the first issue with the projector, I found the following post, with suggestions from forum experts @DavidPK and @WyreNut:  Sprout Projector.  This may be difficult to do based on your second issue. For the second issue with the touch mat, I would first make sure that you have all of your drivers up to date, and make sure you have the latest update for Sprout Workspace installed. You can use the HP Support Assistant, to check for updates. Please let me know how that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.

http://h30434.www3.hp.com/t5/Sprout-by-HP/touch-mat-not-woring-with-touch-only-can-use-mouse/td-p/5550112
Relevancy 77.83%

Hello all. 
I have a non touch E5450 base, I want to put a touch screen top assembly onto it. I have sourced the whole top assembly including hinges. But I was wondering if the Hinge covers are different on this particular model depending on the screen used? I know some of the 7000 series have different hinge covers, but not sure about the 5000 series. 
Comparing photos on Google has been inconclusive and I am unable to find a part number. 

Anyone able to help me?

Cheers!

http://en.community.dell.com/support-forums/laptop/f/3518/t/19985079
Relevancy 73.96%

Hi all,

I have recently aquired two touchscreen machines. They are the control unit for cash registers. They are both fairly low spec:

Celeron 1.2Ghz
256 ram
30gb HDD

Just like to hear some ideas on what I could do with this with focus on the touch screen.

-THX
 

A:Touch screen pc, what to do??

It would be great to upgrade them and then use them as photo editing computers for cutting and painting on images.
 

https://forums.techguy.org/threads/touch-screen-pc-what-to-do.815263/
Relevancy 73.96%

R14 touchscreen works at starting and stops after some time. Still works in other windows. Problem resolves after restart and toichscreen stops after sometime.

http://community.acer.com/t5/S-and-R-Series-Laptops/R14-touch-screen/td-p/463230
Relevancy 73.96%

I have a netbook and a desktop. When Windows 8 comes out, if I install it on my desktop, would I have to get a different monitor to use the touch screen or will it work with any of the newer monitors?

A:touch screen

If you want touchscreen capability, you will need a touchscreen. But I am sure Win8 will also work with the traditional gear.

http://www.eightforums.com/drivers-hardware/1916-touch-screen.html
Relevancy 73.96%

Hi every body….any body know what is the best Touch screen software (Kiosk Development Software) please let me know ….thank you.
 

A:Touch screen

Hiya

don't have that much expereince with these, but have a look at this site:

http://www.touchscreens.com/products.shtml

Regards

eddie
 

https://forums.techguy.org/threads/touch-screen.76450/
Relevancy 73.96%

Looking into using a touch screen monitor. I use Windows 7 Home Premium and I understand that Windows Touch is available on the version.

If I would get the monitor, do I need to find drivers or are they include with Win 7?

Is anyone using a touch screen monitor now?

Looking at Windows 8, I have been playing with the Consumer Preview copy and it looks like a touch screen would be useful with Win 8 if a person would decide to upgrade to that.

Thanks

A:Touch screen anyone using

Hello Jack, welcome to Sevenforums!

Touchscreen is useful, and fun. It is by no means neccessary, however. Windows has a standard driver, but for a touchscreen, you will want to look up the driver on the monitor's manufacturer's website. There are 2 different drivers - 64 and 32 bit. Make sure you get the right one according to your system.

If I were to use touchscreen, it would be because of application(s) that require it, or are easier to use because of it.

http://www.sevenforums.com/hardware-devices/217625-touch-screen-anyone-using.html