Windows Support Forum

110-151BR - Memory Card Slot Not Functioning (Bran...

Q: 110-151BR - Memory Card Slot Not Functioning (Bran...

(NEWBIE/FIRST POST)
I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016). Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards. All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer. I currently have all the latest Windows 10 software drives installed. Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?

Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.












Solved!
Go to Solution.

Relevancy 100%
Preferred Solution: 110-151BR - Memory Card Slot Not Functioning (Bran...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: 110-151BR - Memory Card Slot Not Functioning (Bran...

I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved. The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it. Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you. But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)

Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.

https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/110-151BR-Memory-Card-Slot-Not-Functioning-Brand-New-Computer/td-p/3447370
Relevancy 101.48%

(NEWBIE/FIRST POST)I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016).  Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards.  All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer.  I currently have all the latest Windows 10 software drives installed.  Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?

A:Memory Card Slot Not Functioning (Brand New Comput...

I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved.  The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it.  Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you.   But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)

https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Memory-Card-Slot-Not-Functioning-Brand-New-Computer/td-p/3447370
Relevancy 72.67%

Okay I did something really stupid It was late I was Memory on laptop A215-S7416 MicroSD the Express stuck Satellite slot Card Card my in in the dark and I wasn t paying attention obviously so here s what happened I had a SanDisk GB Micro SD Memory Card that I was using in my cell phone I wanted to transfer some pics amp photos from my computer to the phone so I decided to stick it in the Express Card slot of my laptop Simple enough right Well being the incredibly smart person that I am I put the micro memory card in the adapter but it was the wrong one So my computer pretty much swallowed it whole I can t MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop get it back out Now I can t use the Express Card slot in my computer AT ALL because the old one MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop is still stuck in there You can t really see it but if you try to put another adapter in there it won t quot click quot It won t go all the way because the old one I lost is still in there waiting to be rescued haha So my question is How do I get the memory card out of my computer I tried taking it apart but I couldn t get the part of where the express card slot is so that was no good There s a way to do this I know I m just not smart enough to figure it out on my own Which is probably a good thing because I might mess it up again lol I have a Toshiba Satellite A -S laptop Any help is appreciated Thanks -Ashley nbsp

A:MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop

https://forums.techguy.org/threads/microsd-memory-card-stuck-in-the-express-card-slot-on-my-satellite-a215-s7416-laptop.795517/
Relevancy 70.95%

Where is the memory card slot on the Pavilion 550-126?  The slot on the front does not look like the right size.  Is there a way to get a diagram of the front and rear functions?

A:550-126 where is memory card slot

Hi, Very interesting. The following link shows its specs:     http://support.hp.com/ca-en/document/c04875975 It has 7-in-1 multimedia card readerFigure : View of memory card readerSupports the following cards:Secure Digital? (SD)Secure Digital High Capacity (SDHC)SDXCMemory StickMemory Stick SelectMemory Stick PROMemory Stick MagicGateWith Front I/O portsUSB 3.0: 2Headphone: 1Microphone: 1and Back I/O portsFigure : Odense back I/O panelUSB 2.0: 2LAN (Ethernet)HDMI: 2USB 3.0: 2Audio: Line inAudio: Line outAudio: MicrophoneI believe it is at the front but where. What is your card ? Is it on the list above ? Regards. 

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/550-126-where-is-memory-card-slot/td-p/5690390
Relevancy 70.95%

I have a Dell Inspiron 6000 laptop and run Windows XP. my memory card slot recently stopped working. I used to be able to insert my memory card from my digital camera and download my pictures and now it no longer works. It doesn't even show up under My Computer under removable storage. Please help!
 

A:memory card slot

Put a card in it and:

Look in Control Panel - System - Hardware - Device manager

Expand the "Universal Serial Bus controllers" and see if a USB mass storage device is listed.

Also look to see no yellow ? or ! are shown, indicating missing drivers.
 

https://forums.techguy.org/threads/memory-card-slot.533573/
Relevancy 70.52%

just received my new stream 11.  have barely unpacked it yet! quesition: I know that there's a slot for a memory card - I almost never use a camera, so I'm not totally familiar with that technology.   Can anyone tell me what kind of card goes with that slot?  What's the maximum capacity? thanks! w











Solved!
View Solution.

A:which card should I buy for the memory card slot on HP strea...

Yes, that will work. -wes

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/which-card-should-I-buy-for-the-memory-card-slot-on-HP/td-p/4834450
Relevancy 70.52%

My Compaq nx7400 has a pop-out tray on the left side, with 4 slots for memory cards - I think ?! I've tried loading an SD card into the tray & pushing the tray in - but without success..... Anyone know the correct way to use this weird plastic tray thingy ?? Thanks

A:How do I use the memory card slot on my laptop ??

Hi, I have a new G72-25OUS laptop, I'm wondering how to use the slot on the left side, that says SD-MS/Pro-MMC-XD? I assume its to put a SD card in from my camera to upload photos, do I just stick it in and if so, how do I get it out? I don't have a manual, didn't come with one and can't find info in the help section. Hope someone knows how to do this. Thanks.  

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/How-do-I-use-the-memory-card-slot-on-my-laptop/td-p/49651
Relevancy 70.52%

I removed my memory card before ejecting it. Now my memory card slot doesn't work at all. I have done it before and got help on fixing but I can't remember how I did it. It is a readable card and I have tried several different ones so it's not a issue with card itself. The computer doesn't even see I am putting it in. Please help I do a lot of photo's and it's annoying to have find the computer plug everytime I need to get the pictures off.

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Memory-card-slot-not-reading/td-p/5789311
Relevancy 69.66%

I have installed the new windows 10 in my PC, before this i had windows 7 home premium. i have a memory card adapter in which i used to slid my micro SD card and was able to access it when i had windows 7, but when i upgraded to windows 10 and inserted the memory card reader in the slot it stopped detecting, their is no action and i am not able to access it.
Please help
System: Dell Studio 1558 2010-11 Model.

A:SD memory card/ Slot not working in Windows 10

Hi Anandani,
Dell Studio 1558 has not been tested by Dell for Windows 10 operating system you will not find drivers for it. However, please use the card reader Windows 7 driver and install it in compatibility mode.
http://dell.to/1IlNMpd
Please let me know if this works.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19646017
Relevancy 69.66%

My printer's memory card slot isn't recognized by my computer. I am running Vista. Can anyone help with this. I contacted the printer's tech support and they tried but said it was a Microsoft problem.

A:Memory card slot not recognized on printer

Welcome sannallett,
Sounds like a tech support answer. What is the Brand and Model of the printer?
In Device Manager under your Printer is there a notification sign?

http://www.vistax64.com/network-sharing/268942-memory-card-slot-not-recognized-printer.html
Relevancy 68.8%

ok memory reader card is duo slot? need it help even pro in i laptop possible? stick SD i was bored and got some homebrew for my ds but i needed some files off my psp memory stick and couldnt be bothered to charge memory stick pro duo in laptop SD card reader slot? it is even possible? i need help it as its dead and i cant find the charger so i thauhgt quot ill try it in my laptop sd card slot reader quot and after a some moments later bang autorun pops up with the memory stick icon on it all the files are accessable aswell now my question is HOW DID THIS WORK i looked in the slot and the pins are much to big spaces to fit all the pins on the card everyone know theres a size difference between sd and memorystick how did it work i didnt think there were duel sd and memory stick readers all the usb ones if seen have seperate slots this is memory stick pro duo in laptop SD card reader slot? it is even possible? i need help bugging me as it shouldnt that and i have to get it in just the right place to get it to work it doesnt seem to fit snug in the slot any idea on how the hell this is working thanks nbsp memory stick pro duo in laptop SD card reader slot? it is even possible? i need help

A:memory stick pro duo in laptop SD card reader slot? it is even possible? i need help

https://forums.techguy.org/threads/memory-stick-pro-duo-in-laptop-sd-card-reader-slot-it-is-even-possible-i-need-help.662784/
Relevancy 68.8%

I have a Toshiba A S running Windows Vista Home Basic the max memory upgrade is X GB which I purchased via no card 2nd memory recongnition Toshiba A135 slot, newegg com and installed When I turned it on black screen and no boot up Basically it will only reconize one GB of memory doesn t Toshiba A135 2nd card slot, no memory recongnition matter what slot as long as it is only one I tested both memory chips both work in the computer and in either card slot just not both chips in both card slots What Toshiba A135 2nd card slot, no memory recongnition the heck Even stumped the Geek Squad guy at Best Buy he seemed to think it the mother board issue It runs much better on the GB then it did with the MB cha Computer Toshiba A135 2nd card slot, no memory recongnition should be able to run both GB card in each slot and reconize about to of the memory if it would run both cards at the same time I did upgrade the BIOS from to as most of the blogs suggested-still won t recognize the nd GB card nbsp

A:Toshiba A135 2nd card slot, no memory recongnition

cant find your lappy on toshiba site , same thing happened with me and was the bios update i needed so re check its the correct update
have you tried 1x2gb and 1x what you took out??
 

https://forums.techguy.org/threads/toshiba-a135-2nd-card-slot-no-memory-recongnition.939718/
Relevancy 67.94%

I was wondering as I've got spare slot Mini PCI-Express free on my laptop if such Intel Card ITM could fit inside This technology is quite not expensive actually The mini PCI-E Memory slot on Intel? PCI-Express Mini Turbo Card is very ease to access under Intel? Turbo Memory Card on Mini PCI-Express slot my keyboard and it just have to be inserted and at system reboot Intel? Turbo Memory Card on Mini PCI-Express slot Windows will recognize straight that card and the proper Intel Turbo drivers It does act like quot Windows ReadyBoost quot amp quot Windows ReadyDrive quot under and Vista so the system will load faster boost the disk cache load faster Apps amp perform battery improvement Work on quot Mobile Intel Express Chipset familly quot amp quot Mobile Intel Express Chip Familly quot - gb RD RB no software pinning - gb RD RB no software pinning - gb RD no RB software pinning Any experience in return or it is just like inserting a SD Card in the Card Reader to Ready Boost See also this Post http www sevenforums com general-d robson-pe html EDIT Looks some of you threads seems telling not bothering about gimmick stuff for geek guy That's just annoy me having spare mini Pci-e slot as i won't install an expensive G card I don't need it either

A:Intel® Turbo Memory Card on Mini PCI-Express slot

  
Quote: Originally Posted by NoN


I was wondering as I've got 2 spare slot Mini PCI-Express free on my laptop, if such Intel Card (ITM) could fit inside...This technology is quite not expensive actually.

The mini PCI-E is very ease to access under my keyboard and it just have to be inserted, and at system reboot, Windows7 will recognize straight that card and the proper Intel Turbo drivers.

It does act like "Windows ReadyBoost" & "Windows ReadyDrive" under 7 and Vista...so the system will load faster....boost the disk cache, load faster Apps & perform battery improvement.

Work on "Mobile Intel 965 Express Chipset familly" & "Mobile Intel 4 Express Chip Familly".

-1 gb (RD, RB, no software pinning),
-2gb (RD, RB, no software pinning),
-4gb (RD, no RB, software pinning).

Any experience in return? or it is just like inserting a SD Card in the Card Reader to Ready Boost?

See also this Post:
http://www.sevenforums.com/general-d...robson-pe.html

EDIT:
Looks some of you (threads) seems telling not bothering about...gimmick stuff for geek guy!?!

That's just annoy me having spare mini Pci-e slot, as i won't install an expensive 3G card (I don't need it either!)


With 4 gigs of ram any sort of boost program isnt going to help much since it wont often be used.

ken

http://www.sevenforums.com/hardware-devices/86716-intel-turbo-memory-card-mini-pci-express-slot.html
Relevancy 67.94%

So in February I ordered my kid an inspiron as first computer Later slot, card 11- per supposed have memory tag it it doesnt service is to inspiron but I decided to upgrade inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt the memory and I called Dell and provided my service Tag Dell told me it had a GB memory card and I could upgrade to a GB card I ordered the card and disassembled my computer to find there is no slot to upgrade After an hour on the phone inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt I find out inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt that what I am looking at is one with a fixed memory module I told them that per my service tag it is supposed to have a slot and be upgradeable They told me there is nothing they can do So I say how bout you exchange this for one that has what I ordered They say since its over the days there is no way to return or exchange I said even though its your fault Am I being unreasonable All I want is what I ordered After a few more calls to India One person finally tells me there is a first and second generation of this laptop Ist gen has the fixed and the second has the replaceable So I tell them that per nbsp Dell tag nbsp this is supposed to be nd generation and therefor it was built wrong They again say quot we have a day no Hassel return quot and your over that Any suggestions folks I m sick of beating my head against the wall with these people

http://en.community.dell.com/support-forums/laptop/f/3518/t/19992563
Relevancy 62.35%

I have a AMD Dual slot video card on my Asus M A X-Evo Motherboard It is installed in the first x slot and I also have a PCI-e x XF-I Titanium Sound card The problem I am having is that one of the x slots is covered by the video card and the nd one is open but right smack below the Video card My Video card is the Sapphire slot Question PCI-e dual below slot card video about GHz Edition non OC Attached is a picture of what I am trying to explain My other question is Will this cause issues since one of the GPU fans is semi covered Its it recommended Last question If I move this to one of the x slots below on my motherboard will it cause my x PCI-E slot to slow down Thanks ahead of time for any help you can provide Computer Specs - Asus M A x-Evo Motherboard AM AMD FX Core Ghz Sapphire AMD Radeon GHz Edition GB GB DDR Kingston HyperX memory x GB GB WD Black Edtion SATA HD TB WD Black Edtion SATA HD Sound Blaster XF-I Titanium PCI-E x Sound Card Thremaltake Bronze PS Smart Series DVDRW SATA DVD-ROM SATA nbsp

A:Question about PCI-e slot below dual slot video card

My opinion ...

Yes, setting up like that will have an impact. The air flow to your GPU will be restricted so it will more than likely run hotter than it did. It may still stay withing recommended specs, but it will run hotter.

The motherboard has onboard sound (Realtek® ALC892 8-Channel High Definition Audio CODEC ), any particular reason why you don't use that? Onboard sound is perfectly good for gaming and the like now, its not like older machines where you needed a dedicated card for decent quality. In my opinion, you only need a dedicated card if you are doing a lot of detailed audio work (mixing, remastering and other specific audio work). This would totally remove the issue.
 

https://forums.techguy.org/threads/question-about-pci-e-slot-below-dual-slot-video-card.1092148/
Relevancy 61.06%

hi there,
i need to know which know which graphic card will fit for my computer. Ie i want to know which type: DDR ,DDR1 or ddr2 i bought my computer in 2007, but thats not enough to tell.
so please let me know how do i know which pci slot i have?
 

A:which graphic card slot do i require for my PCI slot

The type of memory doesn't matter, its the type of interface the computer supports among a few other things to watch for.

You likely have a PCI-Express slot, as long as it a x16 slot it doesn't really matter if its a version 1.1 or 2.0 slot.

Is this for your Dell or another computer? Whats you budget and what needs do you have for the video card?
 

https://forums.techguy.org/threads/which-graphic-card-slot-do-i-require-for-my-pci-slot.921803/
Relevancy 56.76%

yes or no ?? will this have a bad effect on the computer ?/ any info is appreciated
 

Relevancy 54.61%

Lately, My laptop is very slow in recognizing my usb stick, or my Hard drive (usb 3.0) or my sxs cards through my express card slot. It 's also slow in recognizing my sd-cards through my card reader. I have a very fast laptop. A lenovo W530.

I just started a while ago, and I can't get it to recognize faster . Everything else works just fine and fast.... but it takes up to 4 minutes to recognize these things.

Can somebody help?

Tx
 

A:Laptop slowly recognizes usb stick/sd card/xpress card slot

Hey tidri. 2 things come to mind if it previously worked. One is a reinstall of all the drivers for the mobo, and the other is a full AV/Malware/Rootkit scan. If everything checks out, a full format and an OS reinstall would be my third move.
 

http://www.techspot.com/community/topics/laptop-slowly-recognizes-usb-stick-sd-card-xpress-card-slot.199010/
Relevancy 54.61%

i have done a lot of googling and i still don't understand what are they good for but i have a feeling they r some sort of old data storing devices like the floppy disks. anyway here is the picture of the smart card reader http://www.mega.pk/items_images/4962Dell_Latitude_E6420_496a.jpg its the long horizontal slot . i read a lot of confusing topics of people talking about smart cards of phones and cameras , im interested in knowing what the laptop smart card reader is good for , or the other thing the pcmcia ,
 

Relevancy 54.18%

I ve experimented installing Windows from an installation DVD on several bran name computers which makes a nice clean install without all the junk that comes with these computers But it doesn t always work Sometimes it will recognize the product key embedded on the from Installing on 8 Windows disc name PC's bran a motherboard and sometimes it won t then ask for one which you can t provide as it s hidden And as far as I can tell I can t use a Windows installation DVD when the PC came pre-installed with Windows What I would love to do is create an Installing Windows 8 from a disc on bran name PC's install disc with winreducer with all the updates I hate Windows Updates beyond words and be able to just make clean installs on new bran name PC s for customers willing to pay extra for a clean system As far as I know this should be legal as it still uses the original product key provided with the system Does anyone have any experience or comments on this subject nbsp

A:Installing Windows 8 from a disc on bran name PC's

Let me just make sure I understand you situation. Are you looking for a way to download a copy of Windows 8 so that you can install and then upgrade to Windows 8.1? That could possibly solve your issues if you can burn a copy of Windows 8 to a disk, install it, and then upgrade to 8.1. You can download the Windows ISOs here.

You can probably contact MS telling them that you wanted to reinstall Windows but the product key embedded on the motherboard didn't work. They are usually lenient with that.
 

http://www.techspot.com/community/topics/installing-windows-8-from-a-disc-on-bran-name-pcs.204878/
Relevancy 53.75%

When inserting memory module on the memory slot it was not aligned properly. When i turn on the power i noticed smoke and i immediatly turned off the power. Removed memory module and half of it was burnt, now my question is the memory slot damaged? Because its slightly burned in the inside slot, could i install a new memory module in that particular slot? or do i have to change the memory slot thats on the mother board?
 

A:Memory Slot

You are probably lucky if you didn't kill the whole board. The slot is most likely toast. If you were brave enough to try another stick in the same slot, it may not work, or it may burn-up something else. I don't think changing the slot is really an option. Motherboards are not exactly repairable items.
 

https://forums.techguy.org/threads/memory-slot.201712/
Relevancy 53.75%

other day my computer made loud long Beeps at Post Google listings said dram problem I normally run gb of ram in a - configuration I removed the card from B and then my system started fine with just one card in A wondered if it was just the card its-self so I placed the removed card into slot A still started up fine with just one card original B card installed in A then I placed other card which was originally in slot A into slot B to be memory bad slot B1??? back to - again back to long Beep at Post again as long as i leave B empty then my system starts fine motherboard manual says i have to have a card in A and B for duel channel to work--- right now i only got gb showing on start up page looked at System Device Manager and found a funny thing no yellow markers shown but -----all my Nvidia nForce bad memory slot B1??? Ware slots bad memory slot B1??? show quot no driver installed for this device quot but under the quot driver tab quot each shows the driver name and version listed driver update wizard for each said quot the correct driver software program was installed quot ran quot scan for hardware changes quot --- found nothing here is list ---Direct Memory Access Controller bad memory slot B1??? High Precision Event Timer nForce Memory Controller listed twice Numeric data Processor Nvidia nForce PCI System Management PCI Standard RAM Controller listed times Programmable Interrupt Controller System Timer all with no driver installed but driver name and version listed under driver tab did go to Nvidia and run their motherboard driver tool downloaded recommend program and after install and reboot no changes is my B ram slot problem a side effect of hinky windows os over time or is it just my motherboard dying of old age power supply old age should i do a complete clean reinstall of Vista ran Repair from my OEM disk which says no repairs needed build data---- P N-D ASUS motherboard GB Western Digital blue SATA HD No-Raid Intel socket Core Duo CPU Nvidia DDR GT GPU OCZ DDR mhz RAM running at GB at present time OCZ watt Power Supply Vista OS i built system in with no major problems until now replaced DVD drive and Viewsonic monitor---both quit working over last few years sorry about the edit have new DVD drive and monitor for awhile nbsp

Relevancy 53.75%

Hi ive just got [SOLVED] startup PC problem bran new Wierd with my new PC and everything seemed to be just great but ive encountered a wierd problem thankfully nto a fatal problem as i can use the PC in any way without anythign stopping working my problem is when the pc starts up it goes the the first screen which i think is the BIOS screen [SOLVED] Wierd startup problem with bran new PC i dunno but it just shows the motherboard makers screen than after that it goes to a blank screen with some really wierd characters see pic in the link below CLICK HERE When this shows i cant do anything press any key and it just copies those same characters right nect to it and it never loads windows so when trying to get around this i press F at the BIOS screen again ill re-iterate i know this is not neccesarily what its called so correct me if im wrong and it goes to a screen to choose which device to boots from so i choose my HDD and press enter and everything works like i said this does not appear to be a fatal problem but its hella annoing to have to go through this process every boot anyone know whats going on with this System specs incase this is needed OS Windows XP Meadia Center Eddition mobo Asus P N-E SLI NVIDIA nForce i RAM GB CPU Core Duo GHz Video nVidia GTX MB integrated everything else ive been using my iPod to transfer most files from my old PC to this one and had it plugged in when starting up so i unplugged it to see if the same thing happend and it did so at that time all i had was a monitor mouse keyboard and power plugged in Thanks for any help

A:[SOLVED] Wierd startup problem with bran new PC

try a cmos reset

http://www.techsupportforum.com/forums/f10/solved-wierd-startup-problem-with-bran-new-pc-173649.html
Relevancy 53.32%

I keep trying to install my intel turbo memory to my latop but it keeps saying its not present or not functioning any ideas?

A:Intel Turb memory NOT functioning or present

i fixed it thanks to Intel Turbo Memory will not function nvm

http://www.vistax64.com/software/247996-intel-turb-memory-not-functioning-present.html
Relevancy 52.89%

Hi,

I have a dell dimension 9200 and the motherboard can handle a maximum of 4gb of ram, but is there a limit per slot?

In other words does it have to be 4 x 1gb sticks of ram or can I use 2 x 2gb sticks?

The reason I ask is that I've had lots of bsod and crashes recently and after performing lots of tests using memtest it seems that 2 of the ram slots on my motherboard are bad meaning I only have 2 good ones to use.

Andy

A:Maximum memory per slot?

RAM Memory Upgrade: Dell, Mac, Apple, HP, Compaq. USB drives, flash cards, SSD at Crucial.com will provide that answer for you.

According to crucial





Quote:
Each memory slot can hold DDR2 PC2-5300, DDR2 PC2-6400 with a maximum of 1GB per slot.

http://www.sevenforums.com/hardware-devices/142569-maximum-memory-per-slot.html
Relevancy 52.89%

I have an IBM T30 laptop which has 2 slots for memory. Which is the primary? I am adding a 512 mb memory module and I want to know which slot should contain the 512 and which
one the remaining 256. BTW, even though I have a 256 in each slot most of the time it only
recognizes a single 256 module. Thanks for your info.
 

Relevancy 52.89%

I have been building computers for years and never found a reason for the placement of the memory slots on a motherboard. If you look at a board that uses an Intel CPU, the slots used are1-3 and/or 2-4. If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4. Does anybody know why this is? No, I'm not trying to make a better motherboard, I'm just curious enough to finally ask.

Thanks for any info anyone can give.
 

A:Memory slot placement

'If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4.'

refer to the MSI K9N - which see;

http://www.bosamar.com/K9N/review.html

Dual channel with slots 1/3 or 2/4.

Assuming that you installed 2 Gb in 4 modules of dual channel ram and it is used from byte 0 to 2047 linearly, then assuming that the average 2 Gb ram install running XP uses about 50% of the Ram running avg8 (as example), you would get heating in ram modules 1 and 3 and none to speak of in 2 and 4.

Thus, heat separated components and better cooling.

My opinion.
 

http://www.techspot.com/community/topics/memory-slot-placement.114983/
Relevancy 52.89%

it seems that the memory stick slot doesnt work anymore. in the device manager there is a yellow question mark and it says that it it not working. i would try installing the drivers but i kinda lost the recovery cd or what not. well before when i bought this, VAIO PCV-RX580, it was using Windows XP Home and now i use Professional. not sure if that makes a difference. im just wondering is there anyway i can get the memory stick slot to work again?

A:MEMORY Stick SLot???

Try updating the drivers from here, search for your memory device.
http://www.sonydigital-link.com/mems...n#ms_downloads

http://www.techsupportforum.com/forums/f10/memory-stick-slot-35672.html
Relevancy 52.89%

HEY GUYS GREETINGS i just joined earlier today im seriously in need of help my friend ask me to fix his pc i tried to replace the memory with mb ddr with his original memory mb and a mb of ram just then when replacing it and turning it on i heard a huge quot beep quot then i immediately shut the pc down then when i check it up i saw i slot, help Fried memory quot black spot quot on one Fried memory slot, help of the memory slot i figured it out its fried up luckily the mobo has two memory slot only one of the slot had been fried i replaced the two mb with the original ones the problems now is that the pc is kinda slow in starting up showing the bios and showing a quot blue error screen quot after and sometimes restarting over and over again i really need your help guys really really need it im counting on this site for any help you can give thanks raj philippines nbsp

A:Fried memory slot, help

You not only fried the memory slot, you have damaged the motherboard
 

http://www.techspot.com/community/topics/fried-memory-slot-help.128594/
Relevancy 52.89%

I just purchased my computer yesterday. I removed my Sony Memory Stick PRO Duo from my digital camera and was going to download them to my computer. The slot came with a Dell piece. My memory stick is too small. It did not come with an adapter and I have no idea how to get it installed. Any ideas???

A:need help with memory stick slot

It is likely that the two aren't compatible.

What model Dell do you have? The type of adapter that you need depends on what slots your Dell has.

Also - most cameras come with a USB cable. Could you use that instead?

http://www.techsupportforum.com/forums/f217/need-help-with-memory-stick-slot-531472.html
Relevancy 52.89%

actually, i was used to a pc with 160mb-ram - which is 32 + 128. now i own a faster one with one single 512mb-slot. but unfortunately, some problems occur: gta3 is collapsing all the time, i cannot copy a normal 1024x768 .tga-image to clipboard via corel (»low memory«) and after watching some freshly downloaded quake3-bots i got the message »low memory«, too. sometimes, even some multitasking surfing can bring me up to fully busy memory - is this a technical problem or am i asking for too much power!? i heard something like this memory-damage would lead to the problems i have.
speaking against it is a rather stable quake3 while in game and a fascinating stable 1nsane played also in 1280x1024 - without any stinky problem.

thanks and regards,
ungua
 

A:¿maybe my memory-slot damaged?

The memory module might be faulty or motherboard might not support 512M modules
 

http://www.techspot.com/community/topics/%C2%BFmaybe-my-memory-slot-damaged.4775/
Relevancy 52.89%

My Hp Pavilion g tx did not pose any problems for years But a week ago I upgraded my RAM from to gb The shopkeeper inserted hynix gb nbsp ddr ram So Can Other... one I ram 8gb 4g in to my slot. upgrade memory ram that makes two rams in my loptop nbsp - Samsung Came when I purchased laptop years ago - gb ddr Hynix b ddr nbsp After a week my laptop stoped working Showing it two service center they said one of my nbsp memory slot is damaged and can't be used nbsp So now I had only one memory slot active with gb ram inside it My Question nbsp is - CAN I INSERT GB RAM IN ONE MEMORY SLOT SINCE OTHER ONE IS DAMAGED nbsp OF MY PAVILION G TX MOTHERBOARD nbsp If yes then please tell me - Of what type of ram should I be looking for Sepecification From where should I buy Crucial got gb ram which I can't usePlease reply ASAP nbsp Thanks amp RegardsPrince Soni

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Can-I-upgrade-my-4g-ram-to-8gb-ram-in-one-memory-slot-Other/td-p/5714534
Relevancy 52.89%

Can anyone tell me where the RAM expansion slot is on a MITAC 7521 laptop, I can't find it. DOH!

Thankyou
Darlopie
 

A:Can't find my memory slot !!!

look at the manual or call the manufacturer.
 

https://forums.techguy.org/threads/cant-find-my-memory-slot.335960/
Relevancy 52.89%

So recently my colleague tried to upgrade the RAM in his laptop, but he ended up messing up really bad he actually broke the only memory slot on the motherboard (yikes!). He asked me to take a look at it for him, and I was pretty surprised how badly he had messed it up (as in there's no way it could be fixed). I told him he might have to replace the entire motherboard, but he really can't afford that right now. I let him know that might be his only option, but I decided to ask here before giving up. The rest of the motherboard is fine; only the memory slot is broken. So is it possible to replace just the memory slot without replacing the entire motherboard? And if so, can anyone help me out with doing this? He does really need his laptop, so any help would be awesome.

A:Broken memory slot

How long can he go without a laptop?
That is a big project. You will need to be a master with a solder gun. Just getting the old part off without melting the motherboard will be an adventure. There are a LOT of pins.

First you will need to find the Brand and model # of the motherboard. You can use CPU-Z for that - it will list the info on the third tab.

Then, armed with that info you will search for the RAM SOCKET replacement. This is where it will get interesting, as the available sources will be in Asia. Shipping will kill you (for a $3 part). And you will probably need some translation skills too.

Your colleague really couldn't afford to mess his RAM Socket up. Now his best bet is to buy a new laptop.

http://www.sevenforums.com/hardware-devices/334046-broken-memory-slot.html
Relevancy 52.89%

I have a Tecra Laptop running Windows XP Professional The latptop has two slots A amp B in which you can add MB of memory each When starting Problem Slot Memory up the PC with both modules installed I get the error message quot Windows could not start because the following file is missing or corrupt system drivers pci sys You can attempt to repair this file by starting windows setup using the original setup CD-ROM Select R at the first screen to repair quot I have done as indicated and done a full repair on Windows XP but still get same message I then went to Microsoft Memory Slot Problem com to search the knowledge base According to Microsoft the above message indicates quot This issue may occur if your computer contains a hardware component that is either damaged or is incompatible with Windows XP quot I followed their instructions and it turns out that if I put just MB in memory Slot A the Memory Slot Problem computer starts up fine If I add it in MB in slot B I get the above problem At first I Memory Slot Problem thought it was a bad memory module but if I switch them they will both start up the computer in Slot A when used by themselves So it appears to me that Slot B is the problem somehow Any thoughts or assistance greatly appreciated nbsp

Relevancy 52.89%

I was told by Lenovo that one slot will accomodate 1 gig of memory, instead of using 2 half gig sticks. I was also told about something called "memory boost" as an external memory source to increase memory. has anyone heard of this? I want to run PhotoshopCS and need 1 GIG of memory and don't want to get new motherboard(the machine is long out of warantee). can anyone help on this issue?
thanks, JeffB
 

A:Bad Memory Slot in IBM T30 Laptop

"readyboost" is a feature only available for Vista, where it can use a USB memory stick as an alternative to paging back to the hard drive, it's not really in place of RAM.
 

https://forums.techguy.org/threads/bad-memory-slot-in-ibm-t30-laptop.635364/
Relevancy 52.89%

My motherboard just went out on my pc and I was wondering if there is something that I can hook up to my laptop that will let me read whats on my pc memory, kind of a external memory slot or something. I've been searching google for a few hours and I can't find anything and I know you guys always know what your talking about and answer very quickly. Any help would be appreciated.
 

A:External Pc Memory Slot

Your actual data is not stored in the memory, its stored on the hard drive. And it's very easy to connect a hard drive to any other PC, there are many adapters for this.

Here's a version that simply connects a drive, either SATA or PATA(IDE) to a USB port without any enclosure: http://www.newegg.com/Product/Product.aspx?Item=N82E16812232002

Here's a version that basically converts the drive into an external drive that you can safely use that way: http://www.newegg.com/Product/Product.aspx?Item=N82E16817388017
This one only supports SATA hard drive with a connector like this: http://www.google.ca/imgres?hl=en&s...dsp=35&ved=1t:429,r:0,s:28,i:160&tx=102&ty=76

More enclosures to choose from: http://www.newegg.com/Store/SubCategory.aspx?SubCategory=92&name=External-Enclosures
 

https://forums.techguy.org/threads/external-pc-memory-slot.1064760/
Relevancy 52.89%

This is a hardware question for anyone that can help me out. I have tried to upgrade the ram in a dell dimension 5150, after seating the additional ram one of the existing slots containing ram started smoking with an obvious plastic burning smell. I have removed all ram and the burning is still occurring when powering on accompanied by a loud beeping noise. It's clear that one of the slots is melting. Need to know what my options are now. New board, or can this be rectified. Obviously the slot is now damaged and can't be used but there are three remaining. Never experienced this and unsure what has caused it to happen ? Any help would be greatly appreciated.

A:Memory slot smoking

Please place your system specs, that way we could help you easier.:
System Info - See Your System Specs

The beeping noise, is it a one long beep? Or is it accompanied by another long or short beep?

http://www.sevenforums.com/hardware-devices/288897-memory-slot-smoking.html
Relevancy 52.89%

Hi,my name is fajar from indonesiai want to add new memory to my laptop HP 1000-1b09auin CPU-Z, my laptop have 2 memory slot,but, i can't find other memory slot where is the other slot ?  Thanks for help  Best Regards,

A:I Can't Find Other Memory Slot

Hi: If you look at the illustration in chapter 4, page 52 of the service manual, it appears that the memory slots are stacked on top of each other. http://h10032.www1.hp.com/ctg/Manual/c03762978

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/I-Can-t-Find-Other-Memory-Slot/td-p/5655384
Relevancy 52.89%

Hi. I have recently aquired a very old computer (8-9 years old). I am looking at replacing the old agp graphics card because it is not working properly and then sell the computer for quite a low price. Any way.

I have looked in the case and took the card out and I belive that the graphics card slot is agp 2x. The card has two slots in it leading me to belive that it is a universal 1.5v 3.3v card. I am just wondering what cards my computer would accept and whether a 4x card would work ok in a 2x card slot.

Any help apreciated.

Thanks.

 

Relevancy 52.46%

1. Expansion SlotWhat is the expansion slot specification for this model as we would like to add a dedicated graphics card with DisplayPort ? 2. MemoryHow many memory slots does it have on the motherboard ?What type of memory is required ?What is the maximum memory supported on the motherboard ? 












Solved!

Go to Solution.

A:XC-704 Expansion Slot & Memory Upgrade

Ok, Sorry looking up the model at Kingston and a couple other sites didn't show your computer and seeing I hadn't seen any I was confused. Based on what I have found maybe a Model from other country.  With that said it looks like it comes with 2gig DDR3L Ram and is Upgradable to 8Gig Also looks like yours comes With 1 PCI Express x16 Slot. I am not sure with the PSU and with that slot if you would be able to upgrade to a different Graphics Card. GPU and size of case would put a huge limit on what could be able to fit...  James

http://community.acer.com/t5/Aspire-Desktops/XC-704-Expansion-Slot-amp-Memory-Upgrade/td-p/392919
Relevancy 52.46%

How can I upgrade my laptop memory? There isn't a memory slot at the bottom of the laptop.

A:I can't find the memory slot to Satellite S70-B-10V

Memory slots on this notebook model are placed under the bottom cover so when RAM modules must be exchanged or upgraded bottom cover must be removed.
Please note: on some notebook models RAM upgrade is supported by notebook owners and RAM upgrade steps are described in user?s manuals document.

I your case such upgrade is not supported and RAM upgrade should be done by authorized service provider.
Generally speaking bottom cover removal is not complicated but you should not do it alone. This will cancel valid warranty.

In my opinion, before you do anything contact nearest Toshiba service provider in your country and ask for help. Simply pick up some info about price and compatible RAM modules.

https://forum.toshiba.eu/showthread.php?79831-I-can-t-find-the-memory-slot-to-Satellite-S70-B-10V
Relevancy 52.46%

Hi guys,

I'm working on a windows vista computer that would restart randomly and get a window exception bsod. I took out a memory module and ran memtest86 with memory in slot 1. Failed. Swapped it out with another memory stick but on the SAME slot on the motherboard. Failed.

Took that stick, put it in another slot on mobo. Passed. Took the other stick put in in that next slot, got the restarts again. Could it be that the memory slot that went bad on the mobo also caused the memory stick to go down with it?
 

A:Solved: bad memory stick AND slot?

Yes, that could be possible.
 

https://forums.techguy.org/threads/solved-bad-memory-stick-and-slot.1011709/
Relevancy 52.46%

Alrighty I m running an MSI K N Neo I ve had it for a while help. coded memory slot Color so far I ve just been running a stick in Color coded memory slot help. the first green slot Someone got me two sticks of to fill out my system I installed them but only recognized g of ram I checked the manufacturer s site to find http www msicomputer com product p spec asp model k n neo platinum a nice diagram about dual and single channel memory that makes no sense to me I believe all the sticks are dual channel they have memory modules on both sides of the ram if that is how you tell I m not sure All three sticks are kingston value ram they are pc all three work as I discovered after some musical chairs with memory I m currently running the two new sticks recognizing g of memory while I have my original stick in a box Can anyone help me out with the diagram or point me in the direction of something more helpful The manufacturer s website has an online tech support page that is under construction I just downloaded the manual but I was hoping for some easy insight Anything would be greatly appreciated at this point Thanks nbsp

A:Color coded memory slot help.

http://www.msicomputer.com/product/p_spec.asp?model=k8n_neo4_platinum

Did you scroll down to the "DIMM Module Combination" and "MSI Reminds You..." and read what is posted there?
 

https://forums.techguy.org/threads/color-coded-memory-slot-help.663643/
Relevancy 52.46%

Can i upgrade my 4gb ram to 8gb? How many slot does hp 15 g005ax have?

A:hp 15-g005ax maximum memory and slot

Hi, It has: 1 customer-accessible/upgradable memory module slotSupports single-channel memoryDDR3L-1600-MHz Single Channel SupportDDR3L-1333-MHz Single Channel Support (DDR3-1600 downgrade to DDR3-1333)Supports up to 8 GB of system RAM in the following configurations:? 8192-MB total system memory (8192×1) or (4096×2)? 6144-MB total system memory (4096×1) + (2048×1)? 4096-MB total system memory (4096×1) or (2048×2)? 2048-MB total system memory (2048×1) Source: 3rd manual on the following link, page 2        http://support.hp.com/my-en/product/HP-15-Notebook-PC-series/6545564/model/7169754/manuals and the answers: (a) Yes (b) only one. Page 65 of the manual shows you part number and how to install RAM Regards.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/hp-15-g005ax-maximum-memory-and-slot/td-p/5818321
Relevancy 52.46%

i have a N1996 motherboard with two slots for 184pin memory. i have purchased a new module to slot into the second slot but i just get a long beep then the beep stops, then a long beep again etc.
i have just tried the original one in the second slot(on its own) twice, but still the beep. i have put the memory back into the first slot and it works fine.

any help would be grateful

would i need to change the bios setting, or do you think that the second memory bank is down.
 

Relevancy 52.03%

sorry i like to seek your adivce on the following matter

i am using asus P7H55-M motherboard..i was actually using kingston 2x 2GB 1333MHz ram..recently i added 1 nex kingston 1x4GB 1333MHz ram..it was working fine until today when the com could not boot up..when i check, i found burnt mark on the 4GB ram and the memory slot..

my question are:
1) could i replace my motherboard if it is still under warrenty
2) could the burnt mark cause by the mismatching of the ram..
 

A:Burned memory slot on Asus P7H55-M

7ryota said:





1) could i replace my motherboard if it is still under warrentyClick to expand...

I guess so, have you ever tried to establish the communication with the motherboard maker yet? Many of them has it own support lines that can provides the RMA informations.






7ryota said:





2) could the burnt mark cause by the mismatching of the ram..Click to expand...

How? Did you actually force it to be seated in backward position? Look closely at the notch of RAM, they can only go one way, and you can feel the pressure of installing the ram if it goes in wrong way.
 

http://www.techspot.com/community/topics/burned-memory-slot-on-asus-p7h55-m.166579/
Relevancy 52.03%

When I populate slot2 with 512mb noname ddr1 I cannot boot into windows, BIOS comes up ok and memory tests ok. This is intermittent but now almost 90% of the time it won't boot. slot1 contains a 1GB kingston pc3200.

With no ddr in slot2 it boots ok and with a 1GB stick (corsair) it boots ok. I guess it was the noname 512MB stick but seems strange it passed all the memory tests (from ubuntu grub loader)

MB is an Asus K8S-MX

A:Won't boot into windows with 2nd memory slot filled

hi what happens when you put the 512MB stick in slot 1 and the 1gb stick in slot 2? kinda surprised your running win7 64bit on just 1.5 gb of ram.

http://www.sevenforums.com/hardware-devices/361167-wont-boot-into-windows-2nd-memory-slot-filled.html
Relevancy 52.03%

Hi all I am having a strange problem with my PC I have a year old motherboard Leadtek Winfast K nCR D Pro and a new Athlon XP and new x GB corsair value memory - PC slot issue weird Resets sticks My PC is randomly resetting itself even sitting at the bios screen just as though the reset button had been pressed I disconnected all the drives and it still happens I have installed a new PSU and it still happens This is the bit that confuses me I PC Resets - weird memory slot issue have three dimm slots one black two blue for dual channel If I put either of the chips only in the black slot I get NO problems at all If I put either of the chips only in either of the blue slots it randomly resets this happens whether I have a single chip in one of the blue slots or both chips in both blue slots Obviously when there is only one chip in one blue slot the bios does not show dual channel enabled Is there any difference in the way a motherboard deals with the memory in the blue slots which could indicate a problem with the memory or is it likely the motherboard is dying Thanks for your help nbsp

A:PC Resets - weird memory slot issue

Assuming the RAM is correct for your PC go into BIOS and set DRAM or RAM or whatever your RAM is listed under to Auto, reboot and see if that helps. ALso, make sure that you have the RAM in the correct slots for DDR (probably the two blue as you stated).
 

http://www.techspot.com/community/topics/pc-resets-weird-memory-slot-issue.27567/
Relevancy 52.03%

I m sorry this is so long but please take the time to read it all because I have already taken a LOT of steps to solve this myself I am an IT Professional and have been Memory locks Stick up unless in is Vaio slot since the s The computer I m having the problem with is mine it has always had up-to-date AV and has Automatic Updates on I check it every so often with SpyBotS amp d or MalwareBytes and it has NEVER had anything besides tracking cookies It has been on a secured wireless network out in the middle of nowhere doubt anyone would hack it with both a hardware firewall at the DSL entry point and Windows Firewall on It has never had a Memory Stick in its slot before now The only removable media I ve ever used with it is a big USB disk for backups which unfortunately has not been done Vaio locks up unless Memory Stick is in slot in about months Vaio locks up unless Memory Stick is in slot I ve never had Limewire or any other risky stuff installed on this computer I don t use FaceBook or any of the social networking I don t surf any type of risky sites Vaio locks up unless Memory Stick is in slot and I don t download anything onto this computer Its the safest computer on the planet The computer is a Sony Vaio K-series laptop probably - years old running XP Home SP and IE Here s the sequence of events as best I recall them - everything is fine I m looking up something boring like outboard motor parts Its supposed to storm tomorrow so I am going to unplug it Automatic Updates are downloaded and ready to install so I choose quot Install Updates and Shutdown quot It does its thing in a normal amount of time no indication of problems and shuts down I unplug the charger and put it away - I get the computer out plug it up push the power button It gets to the WinXP logo with the progress bar underneath The bar rotates around a couple times then sticks I wait probably minutes and nothing ever happens I notice the orange light is on beside the quot Memory Stick quot slot I boot it up in Safe Mode That works I check the logs for the Windows Updates everything appears to have went fine Check Event Viewer for some clue as to what happened nothing Check Device Manager no splats Everything looks fine Hmmm maybe a fluke try a normal reboot again Exact same result hangs at same place with orange light on beside quot Memory Stick quot slot So I boot into Safe Mode and uninstall all of the Windows Updates that have the date on them I made sure I did them in the correct order so all dependencies were resolved Tried another normal boot Nope hangs at same place with orange light on beside quot Memory Stick quot slot OK now I m scared So I go to my other PC the desktop and do some Googling of the symptoms I find one in particular a malware-infested Sony VAIO locking up with Memory Stick light on So its probably malware Since I already have the latest version of Norton AV I run a full scan on the Vaio with that Comes up clean Then MalwareBytes latest version comes up clean Then I reboot into Safe mode with Networking Then run Housecall online with Trend Micro comes up clean Just for S s amp G s I even try their New Beta scan clean Then Kaspersky s online scanner also comes up clean Then BitDefender again clean Then as a last resort I disable NOrton s real-time protection and run Combofix Combofix did not find anything I looked through its logs but have to admit I m not that good at fixing something manually I don t know how to interpret Hijack This logs I always give up before then and reformat But I have a bunch of old software that I don t know the registration keys for so I do not want to reformat At this point I kinda panicked and tried Restoring Windows to a Restore Point on That hosed my IE Windows was unable to restore back to the Restore Point that Combofix had just created - So I dinked around with it reinstalling IE and Java Finally got that working again I had read in the post about the malware-laden Vaio that his booted normally if he pu... Read more

A:Vaio locks up unless Memory Stick is in slot

Hello SunBoss

I am happy to report that I have solved the identical problem you describe involving system hang on the Windows XP splash screen and the yellow memory stick light turning on at that point. Similar to your experience I could boot in safe mode but no way to get into a normal boot. As this was a client machine on a limited budget I could not waste a lot of time and contacted the client and got authorization to do a full system restore figuring it would eliminate any software issues (conclusion based on ability to boot in safe mode it seemed reasonable?). Much to my surprise after a full factory restore from the OEM restore DVD the symptom was still there, in fact the restore could not complete because it required a full normal boot to finish the restore. So now I was really perplexed, no way it was software (given that the drive had been fully erased and reformatted), so that only leaves hardware and the memory stick module seemed the likely culprit and on a hunch I tore the bloody thing apart (keyboard, rear hinge cover, and all screws from bottom of the case) which allowed be just enough clearance to get inside and remove the ribbon cable from the memory stick module and presto the problem is resolved and unit now boots normally and I am in the process of bringing the system back up to current standards with all the updates, etc, and have already done multiple reboots with no problems. So I suspect you will find similar results once you go through the difficult task of tearing it apart as our symptoms were identical.

Trust me it has nothing to do with virus or malware activity, it is an actual hardware failure!!

Good Luck

http://www.bleepingcomputer.com/forums/t/235912/vaio-locks-up-unless-memory-stick-is-in-slot/
Relevancy 52.03%

I just recently purchased a 1gb stick of Kingston ddr400 Ram for my pc.

Currently i have 2 x 512mb sticks in my 1st and 3rd slot of my MB. I currently use the Asus A7N8X-D Board. 3 Memory slots total. What would you suggest me to do for the order of my memory or does it even matter ?

Slot 1 : 512mb
Slot 2 : Empty
Slot 3 : 512mb

Eventually going to be 3gb Memory but Im not the best in these types of configurations.

Thanks ahead of time guys.
 

Relevancy 52.03%

Hi, can anyone tell me how to access the second slot in my e-system 1511. I was told it was under the keyboard. I can unclip the clips but there seems to be something else holiding it down. I ve looked at the back and can see no screw with kb next to it to indicate that, that is the screw for the keypad.
Appreciate any advice. I have upgraded the first memory. I ordered 2gb and this came in two of 1gb so I am assuming there is a second slot.
Thanks
 

Relevancy 52.03%

Here s a VERY strange problem Inspiron s w two G DDR DIMMs installed nbsp was up and running when it suddenly turned off with flashing amber SLOT Inspiron Failure? 660s Memory power light and two-beep code indicating memory problem Inspiron 660s Memory SLOT Failure? When power cycled the same symptom occurred flashing amber amp two-beeps Troubleshooting showed DIMM slot was bad Item on p Inspiron 660s Memory SLOT Failure? of User s Manual If either G DIMM card was installed in the DIMM slot Item on p the system would boot OK Both slots populated Flash beep DIMM slot populated with either G DIMM Flash beep DIMM slot populated with either G DIMM Boots OK After quot fixing quot the system by de-populating the DIMM slot full Dell Diagnostics online version were run with all PASS results Memtest passed as well QUESTIONS How could a memory SLOT not memory card suddenly fail in the middle of operation The system was up amp running but nothing was being done on it at the time of failure Did a part of the chipset fail Is there any way to fix this problem short of replacing the MoBo Thanks

http://en.community.dell.com/support-forums/desktop/f/3514/t/19977521
Relevancy 52.03%

Hi nbsp I recently bought a notebook from HP the HP G with A - processor Inside there was a GB DDR L- Kingston memory module slot with HP u... speed G2 - 355 only Memory on 1600MHz K7H44ES shipped and there are two slots available nbsp I checked with CPU-Z and other tools and it showed a DRAM Frequency of MHz nbsp I added a GB DDR HP 355 G2 K7H44ES - Memory speed 1600MHz only with on slot u... L- Cruical memory module to the second slot and checked again with CPU-Z The DRAM Frequency was just MHz the memory size of GB was recognized correctly nbsp I thought it must be because of two different modules got for testing two other identical GB DDR L- Kingston memory modules and DRAM Frequency was again just MHz nbsp And if only one slot is used with any DDR L- I had available DRAM Frequency was MHz But whenever both slots are used it dropped to MHz nbsp What's wrong Do I need some specific memory modules for this notebook respectively CPU and memory controller nbsp HP Support suggested just that but I believe it's not because of this Perhaps the memory controller is working that way that it drops down to MHz if both slots are used But why should that be With none of my previous notebooks or pc this happened always the memory speed as specified nbsp And Google says that A - has a single-channel memory contoller for DDR L- which would be even faster but instead it runs with nbsp I currently use Windows Pro -bit if this of matter nbsp Cheers

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-355-G2-K7H44ES-Memory-speed-1600MHz-only-with-on-slot/td-p/5801100
Relevancy 52.03%

I am using a HP Z400 Workstation Xeon Quad-Core W3565 3.2GHz, 12GB (3x4GB), 1TB, DVDRW, Windows 7 Pro.This the the model with 6 memory slots, so there was a possiblity for 24GB of RAM.  When I populate the remaining slots 4, 5 & 6 with 4GB DIMM, I get errors on boot up for the newly populated slots.  I am unable to configure for 24GB.I did discovered that the DDR3's that I am using are non-ECC.  The system has been running fine with the (3x4GB) setup.  Is the non-ECC preventing the 24GB configuration from working?Thanks for any help you can offer. 

A:z400 - 6 slot memory configut=ration

Yes it is. It is not possible to install standard PC and server memory, I've never seen a system of any brand which supports such a configuration. Officially, the Z400 supports only ECC unbuffered memory modules.However, it will also run with standard DDR3 RAMs, unsupported only means that HP Customer Service won't help you.There are some reports that even 8 GB Modules work, but that's another story, 24 GB runs fine. Mixing different types of memory is generally a bad idea.Use either ECC unbuffered (which is recommended) or non-ECC, preferably six identical modules.DDR3 are relatively cheap, even those with error checking and correction. Good luck  

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z400-6-slot-memory-configut-ration/td-p/5571112
Relevancy 51.17%

I can t seem to get my card reader to work in vista -bit It doesn t show up in the device manager or in My Computer It doesn t even show any unknown devices in device manager in Reader Card Vista Functioning not 64-bit I have a card in Card Reader not Functioning in Vista 64-bit the slot but it just doesn t seem to recognize it Unfortunately this device seems to Card Reader not Functioning in Vista 64-bit be quite generic and I can t seem to find who it was made by it was bought on ebay It looks like this one on geeks com http www geeks com details asp InvtId CX-ICR- amp cpc RECOM Is there a generic driver I could use Somehow I was under the impression that card readers had generic drivers anyway but it looks like I may have been wrong Strangely though the usb port works just fine that is on the front of the card reader Just when I put a card in it does not seem to be recognized If anyone could help I would really appreciate at nbsp

https://forums.techguy.org/threads/card-reader-not-functioning-in-vista-64-bit.676172/
Relevancy 51.17%

This post is probably for the more advanced techs I have a GeForce FX LE MB AGP graphics card that my brother gave me along with an unstable AMD PC system with some bad capacitors I performed my first motherboard surgery by replacing the bad uf - volt capacitors on the board and it was a success So now onto the graphics card The GeForce card Non-Functioning GeForce Card Graphics has D-Sub DVI and s-Video connections and no supplemental power connector I have installed the AGP card in three different working systems and with the same no-go results The power supply unit in the Non-Functioning GeForce Graphics Card systems were w - w which is more than adequate for meeting the minimum criteria for the card On startup the card would display the BIOS information on the screen Version plus the info above for a Non-Functioning GeForce Graphics Card couple of seconds and then the monitor would go blank The hard drive LED would stay continuously lit There were no POST code beeps with any of the three systems Try both connections and occasionally a single flashing underscore cursor would appear on the Non-Functioning GeForce Graphics Card screen - that s all In no test did it appear that the card was allowing a boot into Windows XP Of course I would like to think the card has one or more bad capacitors and with my recently acquired soldering skills that I could replace them however they all appear to be good no dome tops - no leaks - uf - v ones and - uf - v ones I assume that obtaining manufacturer s detail specifications on graphics cards is not possible but would be helpful to know what the impedance should be across the capacitor terminals and at other points Note Based on the advice of a geek I proceeded to quot bake the card quot in the oven at F for minutes Aside from the temporary aroma created and after allowing the card to cool for a couple of hours the result was - no change in the card s behavior I suspect there is an element of voodoo science involved in baking electronic components But some have stated they had success with this method to revive dead graphics cards Apparently the micro solder in the circuits becomes soft and reflows to connect any broken areas This is allegedly due to constant expansion and contraction from use of the card I would add that solder does not flow until the temperature applied is double the oven temp above So it remains a mystery to me how this process could effectively work Any insightful comments or suggestions will be much appreciated Thanks nbsp

A:Non-Functioning GeForce Graphics Card

You tried the card in other systems. Its quite old (7 years) and its a bottom end class card - always was.

Here is a cheap, but powerful GF 6600 card for $35 : http://www.newegg.com/Product/Product.aspx?Item=N82E16814143056 its about 3-4x faster than the 5700.
 

https://forums.techguy.org/threads/non-functioning-geforce-graphics-card.902007/
Relevancy 51.17%

my specs XP Pro SP ASUS P S X BIOS Award Software - version ASUS P S X ACPI BIOS Revision SiS North Bridge SiS South Bridge P GHz GB RAM x GB card correctly Radeon not functioning HD ATI Raeon HD XT AGP MB Catalyst Version RC Aug M-Audio Delta w PS I recently upgraded to a Radeon HD XT - AGP visiontek I used Driver Cleaner to remove all previous drivers then acquired the latest Catalyst drivers from visiontek they appear to be identical to what ATI offered I also installed the latest SIS AGP drivers for my board Perviously I attempted to use both the ATI site s drivers and then quot Omega quot drivers with the same results - bad During Oblivion things are most notable The graphics are sporadically chunky discolored etc The temps seem ok it happens right at start up anyway so prob not the issue In fact even the Windows Radeon card not functioning correctly Welcome screen sort of scrolls down it s blue screen so slowly that it Radeon card not functioning correctly s visible Any ideas This is lousy If I did this right here are a few examples of how it looks Thanks in advance for any suggestions nbsp

https://forums.techguy.org/threads/radeon-card-not-functioning-correctly.649642/
Relevancy 51.17%

Hello there So I have been having problems with my desktop for around months now Initially it began as restarting and screen flickering Now it'll often begin flickering then turn purpleish-with-flickering and eventually crash and show the nv mini sys error The weird thing is that I can seem to boot my desktop without my graphics card Right now I'm on it but my graphics card is not functioning and cannot be detected Yet I can use the computer and watch videos However I can't load any games much to my frustration I can't exactly remember my graphics card model I think it's a nvidia but I'm far from certain My computer is Medion PC MT which I purchased back in I have never had problems like this before Also I have tried solving the problem functioning not properly Graphics card myself by using another power supply cable cleaning the interior removing old drivers and installing new ones Installing new drivers seems like a temporary solution it can keep it running for minutes but then it usually crashes Any suggestions on what I should do I have consider buying a new graphics card or a new PSU But it'd be a big annoyance if I purchased a PSU to find out it's the graphics card Also I've considered buying a new computer if it wouldn't be affordable to just exchange the card or PSU Best regards IndieDane

A:Graphics card not functioning properly

Does the motherboard have on board graphics? Have you tried using that and see if the problem persists?

If you could open your computer and get the exact model # of the Nvidia card, it would be really helpful.

http://www.techsupportforum.com/forums/f10/graphics-card-not-functioning-properly-569553.html
Relevancy 51.17%

THE ISSUE Hardware issue A broken memory stick slot on the HP Pavilion n DETAILED EXPLANATION I don t know how this happened anyway but the catch on the second slot tray is broken causing one side of the installed memory stick to hang loose and not snap in or fit securely resulting in Windows not registering or recognizing that there is in fact a RAM memory stick actually in the second slot CONSEQUENCE I now have only one good RAM memory slot ACTIONS TAKEN SO FAR Purchased and installed nd RAM memory stick in the problem slot PRODUCT SPECS Memory Type DDR PC slot Pavilion broken A stick the on 753n HP memory DDR PC DDR non-ECC RESULTS Problem still exists Crucial s online scanner and the System Specs under My Computer still reads like below Memory DDR PC DDR PC Memory Type DDR PC DDR PC DDR non-ECC Maximum Memory GB Currently Installed Memory MB Total Memory Slots Available Memory Slots MB EMPTY SUGGESTED ACIONS FROM TECH SITES A Replace the mother board OR B Replace the MB stick that s in the good slot with A broken memory stick slot on the HP Pavilion 753n a GB stick THE PROBLEM A broken memory stick slot on the HP Pavilion 753n WITH B According to Crucial s com s Expert Online Tech where I bought the extra RAM this pc HP Pavilion n is too old and cannot handle a GB stick because it s basically an obsolete pc the OS operating system will be severely affected causing crashes and other instabiity if you put a GB stick of RAM in a slot therefore it is not recommended to put a GB stick in a slot MY QUESTIONS Is he right I ve received both yes and no responses so far but no definitive answer What other solutions are there What s involved in remanufacturing or replacing the board Should I contact HP to get a price quote to fix the issue THANK YOU All suggestions reviewed nbsp

Relevancy 51.17%

is the system memory slot basically provided for au003tx is samsung 's 2133 mhz or not? i actually brought this laptop one month ago and am shocked to see the specification tht the memory slot belongs to samsung i can't get to know about that i tried very hardly till now please answer me so that i can do something if i'd been cheatedplease do reply

A:is the system memory slot basically provided for au003tx is ...

@sree_parimi? The slot may have a Samsung memory stick in it but you could install any name brand in it. DDR4-2133 Dual Channel Support (DDR4-2400 bridge to DDR4?2133) Your manual here. http://h10032.www1.hp.com/ctg/Manual/c05228250 REO

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/is-the-system-memory-slot-basically-provided-for-au003tx-is/td-p/5743677
Relevancy 51.17%

I purchased what was described as a 'Dell 3588D Motherboard Slot 1 Dimension
XPS-B' motherboard from eBay. It uses Rambus memory sticks, but has 3
memory slots to fill, while every motherboard of that type I have researched only
has 2 memory slots. In addition, most of the Series B desktops I looked into
seem to be limited to 512MB of memory.
Because my motherboard has 3 memory slots, would I be allowed to insert three 256MB memory sticks, giving me a total memory of 768MB? I'm told that you should
not exceed the required limit of memory. Would someone care to comment on my
predicament?

hextek
 

A:Filling a 3rd memory slot of a Dell B Series desktop

Just try it, it'll either work or it won't work.
 

http://www.techspot.com/community/topics/filling-a-3rd-memory-slot-of-a-dell-b-series-desktop.146470/
Relevancy 50.74%

Hey guys,
I seem to be a bit confused on something. Will a 4x AGP Ti4600 work in an 8x slot on a new mobo I'm considering? I'm just wondering cause I thought the voltage was different...The mobo I'm looking at is cheap, but I have to go cheap... http://www.pcchipsusa.com/prod-m848aluv21.asp
 

A:4x card in 8x Slot

the 8X AGP slots are backward comapitable with 4X. but I would think twice before buying anything from PC chips.
 

http://www.techspot.com/community/topics/4x-card-in-8x-slot.10568/
Relevancy 50.74%

I need a new graphics card.My Mobo is an Asus P4S8x.While browsing through my BIOS settings(with a deep look of Puzzlement)I noticed I can set my Primary VGA BIOS to AGP or PCI.
Does that mean I could use a PCI-Express card? And if so would there be any advantage over using the AGPslot which is8X??
 

A:Use AGP or PCI slot for card?

No. You can use AGP or PCI (not PCI express).
 

http://www.techspot.com/community/topics/use-agp-or-pci-slot-for-card.43873/
Relevancy 50.74%

Hello I have read several posts about this so I will explain my problem in detail I put the correct SD Card in the slot of my new Toshiba Satellite Lap Top I have used it several times before without incident I know the card works it is the right size and out get slot Card SD Cannot of I have removed it before without incident So I Cannot get SD Card out of slot clicked safely remove hardware It said the device can now be removed But when I try pressing it in it doesn t release There is no release button or little hole like on DVD drives etc I beleive the Windows operating system may have some way to keep this from releasing while it is Cannot get SD Card out of slot in use I can not access the drive right now as Windows Explorer does not show it as being there This is most likely because I requested to safely romove it Any ideas I don t feel like going to Best Buy and waiting on line for Geek Squad Thank You nbsp Cannot get SD Card out of slot

A:Cannot get SD Card out of slot

There are no ways to lock a card in the slot by the operating system, it's just stuck. Have you tried using something like tweezers to pull it out?
 

https://forums.techguy.org/threads/cannot-get-sd-card-out-of-slot.1134148/
Relevancy 50.74%

i am looking at this sound card for my laptop
http://www.newegg.com/Product/Product.asp?Item=N82E16829102185

it syas that it is a PCMCIA Sound Card
Interface 32-bit CardBus Type II
is a dell e1505 able to support this card. i think the dell e1505 has an express card slot.

would the sound card be compatible with the dell e1505?
 

https://forums.techguy.org/threads/card-slot.499348/
Relevancy 50.74%

My sd card slot has worked fine on my 4 different sd cards since 8 came out, but suddenly all cards are read only (and work fine on other computer). So I believe it is a card reader hard/soft problem.... Any thoughts? Thanks

A:sd card slot

Open up Device Manager and see if there are any Yellow ! marks on any devices.

http://www.eightforums.com/drivers-hardware/54782-sd-card-slot.html
Relevancy 50.74%

have an old xp2000,512 pc 2100, epox ep8kha board, pny ti4200 vid. my daughter uses it for online games. runs fine 99% of the time. randomly screen goes black. monitor light goes yellow computer doesn't shut down. reboot and will run for a while and do it again. tried an old agp ati 7000 card ran a couple of days then did it again. pretty much convinced it's the agp slot. is there any way to make it live again?
 

A:agp slot or card?

Check the capacitors on the motherboard. Around that era of ePox motherboards, there was a big capacitor scandal overseas, and many motherboard manufacturers mistakenly used inferior capacitors, which were prone to failure. I had to replace the caps on my 8rda+ and a few others as well. They're the little 'towers' on the motherboard, and if the tops of them are bulging, then they're no good. Here's a good picture to show the difference. Check all the capacitors on the board, they're probably scattered about in different places.

Other than that, if you really think it's the slot, then there's no real way to fix it, unless you can see a faulty connection somewhere. Socket A motherboards should be pretty cheap by now, or you might want to consider upgrading the whole thing.
 

https://forums.techguy.org/threads/agp-slot-or-card.680322/
Relevancy 50.74%

I have an EMachine mn 2824 with a SD card slot on the front of the case. Today I bought a Canon PowerShot A400 camera. When I plug the card into the slot nothing happens. It works fine through the camera with a USB connection. What am I overlooking?
 

A:SD card slot

Is a light coming on when you put the card in? If not, the reader may not be connected, or it may have failed. Make sure you are inserting the card into the correct slot and make sure it is facing the correct direction. Usually the label is up. If the light does not come on you may open the case and see if the reader is connected to the motherboard.

Nothing is neccessarily going to happen when you insert the card - you have to go to My Computer, then find the SD drive (it's going to be E:\ or F:\ or something similar) and view its contents.
 

https://forums.techguy.org/threads/sd-card-slot.399348/
Relevancy 50.74%

Im not very tech savvy and it may seem a bit of a silly question. Can someone tell me if theres a secret to opening the SD card slot on my new HP Spectre X2... I tried to open it with  a clip etc but with no success. THank you in adv ance.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/SD-card-slot/td-p/5660791
Relevancy 50.74%

The PCI slot on the prodesk HP pc are not suitable for the lan card that I have

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/PCI-Slot-for-LAN-card/td-p/5686298
Relevancy 50.74%

I have Vista Ultimate x installed on an SD Card Slot Acer Aspire laptop and it has a -in- card reader When I installed Vista I did a clean install and before doing so I wrote a list of the drivers I might need to get later like my graphics card wireless network card etc I failed to write down the -in- card reader so I don't know what model or anything it is but it doesn't work On my SD Card Slot device manager I have a section called quot SD Host Adapters quot with quot SDA Standard Compliant SD Host Controller quot underneath it I use an SD card so I would assume this is related However under quot Other Devices quot SD Card Slot I have three devices called quot PCI FLASH Memory quot and they all have a problem I would assume this is the card slot Any ideas what I could do Also does anyone know where I can get x drivers for a Synaptics PS Touchpad It works but the scrolling features don't work

A:SD Card Slot

I found the card was an ENE Technologies 5-in-1 card reader, and found a set of 9x, NT, 2000, XP and Vista drivers, and they work perfectly fine.

My only other problem now is the Vista x64 Synaptics touchpad drivers..

http://www.vistax64.com/drivers/40939-sd-card-slot.html
Relevancy 50.74%

Hello all,

I know this maybe a stupid question, but there might be a way that someone might just be able to help me, I hope :/

Anyways, I jsut recently bought a scsi cd burner with cable and scsi from a friend and went to install the card on my new computer only to realise that my motherboard does not have an ISA slot, which is what the scsi card requires

My motherboard is an Asus Socket A A7V-E board with 3 PCI slots free. Im just wondering if there is some way around this problem other than buying a pci card.

Maybe is there a ISA to PCI slot convertor or something out there?

Any help is greatly Aprreciated!

Thanks in advance, Lee.
 

A:No ISA card slot help

Nope!....ISA is ISA and PCI is PCI.....there is no converter for these cards. Where did you ever find an ISA SCSI card....must be an antique.
 

https://forums.techguy.org/threads/no-isa-card-slot-help.76470/
Relevancy 50.74%

ordered a new GB PQI SD Card last week and got it today I put it in my laptop drive and booted up my computer I Slot! Sd Card clicked My Computer and saw it labeled as E Drive I clicked it and it wanted me to Format the card I formatted it as FAT because it kept failing when writing to Fat which I later discovered the card cant handle Fat So Afterwards I rebooted then reclicked My Computer and reclicked drive E When I did so Sd Card Slot! my computer instantly froze I could only move the mouse and minimize and close that screen THats I CTRL Alt Del and closed My Computer and My documents mysteriously opened without me knowing So I continued this same process times and if I let it keep going without control alt deleting then it says quot The file is corrupt or Unreadable Now I am guessing that my generic SD drive needs updates But am afraid of screwing something up so I wont try I figured that the card was locked or something but I tried it in different positions and the same result I actually dont own a digital Camera yes I know quot Im in the Dark ages quot but the card doesnt have a thing on it It is totally new and bare Is there a computer utility that I can use to reformat the card or something

http://www.bleepingcomputer.com/forums/t/64058/sd-card-slot/
Relevancy 50.74%

I put a stick in...(256) and macine only counts it as 128...what gives. I was told PC133...would work in PC100 boards. Was I lied to?
 

Relevancy 50.74%

Hello I have this odd problem in my Dell Latitude D core duo where one of work D520 memory slot Dell doesn't Latitude the memory slots isn t working anymore Just yesterday the Laptop would not startup but lights on the front panel came on Dell Latitude D520 memory slot doesn't work so I suspected a memory issue The D has a slot underneath the keyboard for memory as well as underneath the laptop When ever I put memory in the slot under the keyboard it won t startup I tried various memory known to work I even took the memory from underneath the laptop and placed it under the keyboard because it worked underneath But once I placed the memory in the slots under the keyboard it would not startup I would just get three green lights next to the power key Dell Latitude D520 memory slot doesn't work One stayed the other blinked they all eventually stopped entirely Once I removed the memory it would start up I Dell Latitude D520 memory slot doesn't work tried cleaning the memory slot with an air can I ve never encountered this before For now I just run with gig memory stick underneath the laptop It works fine I am assuming a motherboard issue Any suggestion greatly appreciated nbsp

A:Dell Latitude D520 memory slot doesn't work

Sure sounds like the socket is bad, or the memory controller. You may have to live with a single DIMM in the bottom slot.
 

https://forums.techguy.org/threads/dell-latitude-d520-memory-slot-doesnt-work.1103329/
Relevancy 50.74%

I recently upgraded my processor amp motherboard from AMD Phenom II X Asus M N T-M Now it s AMD FX- amp Asus M A L-M LX I ran two modules of RAM GB GB on that previous motherboard These are my modules Corsair CMZ GX M A C Vengeance GB Single Module DDR Memory Kingston Value RAM GB don t know the exact model but it was a Mhz always 2nd DIMM Solved: on Memory slot on is hardware new reserved motherboard module Both modules have the same latency I just had to downclock the corsair module to Mhz amp then they both ran in dual channel mode Now on this new motherboard when I check sys info in BIOS it shows just GB RAM or GB basically it Solved: Memory on 2nd DIMM slot is always hardware reserved on new motherboard just detects what s in the first slot When Solved: Memory on 2nd DIMM slot is always hardware reserved on new motherboard I boot into Windows it says that GB or GB the other slot is always hardware reserved Also task manager shows wrong RAM speed Instead of Mhz it shows Mhz And when I really run it at Mhz or even below Mhz it s always wrong in task manager There s another interesting thing happening when I try to change the memory speed in BIOS When I change it amp as soon as I hit enter after F system just powers down for a few seconds amp boots right up This is just my second motherboard amp idk if it s normal but it sure doesn t feel right I m posting this after going through a lot of posts on similar topics amp the solutions are not working for me I even checked for bent pins on my CPU but it looks good As it looks either the RAM modules are incompatible on this motherboard but then why is the speed in task manager always wrong or something is wrong with the motherboard This is what I think but I need your help to make it work I m mentally exhausted now nbsp

A:Solved: Memory on 2nd DIMM slot is always hardware reserved on new motherboard

https://forums.techguy.org/threads/solved-memory-on-2nd-dimm-slot-is-always-hardware-reserved-on-new-motherboard.1153100/
Relevancy 50.74%

"The card supplied was not recognized. Please check that the card is inserted correctly, and tightly."

I ran some updates on an employee's computer and now when I start it up, I receive this error if the aircard is in the PC Card slot. I understand it's misinterpreting it as being a security card or whatever the case may be but I don't understand why or how to remedy it.

Anyone with a similar experience or that can shine a guiding light?
 

A:"The card supplied was not recognized..." Login issue w/ Aircard in PC-Card slot

What are some other good tech support sites? I work in IT myself and don't use forums for them nearly as much as I should.

Thanks.
 

https://forums.techguy.org/threads/the-card-supplied-was-not-recognized-login-issue-w-aircard-in-pc-card-slot.659596/
Relevancy 50.74%

So, recently i downloaded the latest Catalyst Driver (14.12) from the AMD website Desktop But after installing it and rebooted my PC, my monitor's resolution became smaller (like 800x600 something) and an error showed up "No AMD graphics driver installed or the AMD driver is not functioning properly. Please install the AMD driver appropriate for your AMD hardware" . So what i did is completely removed my AMD drivers and it went back to the original resolution (1920x1080) but now i don't have any AMD drivers installed, what should i do? if i reinstall the driver again it will go back and show the error again. Thanks in advance

A:AMD Graphics Card is not functioning properly error

Click the link below then follow the instructions:

Drivers - Clean Left over Files after Uninstalling

Then re-install the driver again.

http://www.sevenforums.com/graphic-cards/354906-amd-graphics-card-not-functioning-properly-error.html
Relevancy 50.74%

I just installed Win 7 on my custom built PC and everything went great until I tried to access the internet through my wireless card. Windows says that the drivers are all up to date but when I try to open the Ralink Network Utility nothing happens, also windows says that no wireless networks are available. My router is fine because I am accessing wireless internet with my laptop.

Does anyone have any thoughts?

A:Wireless card installed and updated but not functioning

  
Quote: Originally Posted by cgm79630


I just installed Win 7 on my custom built PC and everything went great until I tried to access the internet through my wireless card. Windows says that the drivers are all up to date but when I try to open the Ralink Network Utility nothing happens, also windows says that no wireless networks are available. My router is fine because I am accessing wireless internet with my laptop.

Does anyone have any thoughts?


Do have that rig hooked up by cable network now?

If so I can help you.

greetz

http://www.sevenforums.com/network-sharing/19774-wireless-card-installed-updated-but-not-functioning.html
Relevancy 50.74%

I am not really good with computers I know something properly? Graphics Card not Laptop functioning is wrong but not really sure how to fix it I use Windows Ultimate with a dedicated graphics card GB GDDR AMD Radeon Laptop Graphics Card not functioning properly? HD M and a intergrated graphics card Intel HD Graphics installed in my laptop I used to be able to play Total War Shogun and other games with my AMD Radeon Graphics Card but for some reason my laptop decides to run on my Intel HD Graphics instead now With my little knowledge that I have when I go to device manager - gt display adaptors I can see both AMD Radeon M and Intel HD Graphics there and my laptop shows that both graphics card are functioning properly and up to date But when I go to DxDiag it only shows the Intel HD Graphics and when I disable my Intel HD Graphics Laptop Graphics Card not functioning properly? my laptop cannot detect any graphics card Not really sure what to do anymore any help would be appreciated thanks I am really bad with Laptop Graphics Card not functioning properly? computers I'll need step by step solution edit I am so desperate that I reinstalled windows still no help

A:Laptop Graphics Card not functioning properly?

I don't have much experience with ATI/AMD, but is there an option in the AMD software to select default display adapter?

http://www.sevenforums.com/graphic-cards/273937-laptop-graphics-card-not-functioning-properly.html
Relevancy 50.74%

Hello all first and foremost thanks in advance for any replies here is my dillemma I have a dell card network on-board Solved: functioning not optiplex gx dell specs show a com c -tx on board network card I have recently done a clean install of windows se from dell restore disk which i assumed would give me all appropriate drivers I then downloaded the c x family drivers from com and installed all of them following directions to the letter still nothing Any suggestions a few quick questions does anyone know of Solved: on-board network card not functioning a program i can use to verify what card I have Little com cardid program says I have none on the machine I try the preinstall program that came with the drivers and It says I have no available irq s I disabled pnp mouse and several others keep getting same thing from preinstall Should I disable auto irq steering Also in device manager I have two objects both listed as unsupported devices How do I identify them Are they showing as unsupported due to lack of free irq s I just got an older dell dimension running xp and would really like to network the two comp s for gaming purposes and file transfer of course just not sure how to get the bleeping network card to work thanks again for your help nbsp

Relevancy 50.74%

Hi guys,
I am running ASUS M2N68-AM PLUS motherboard. SOCKET 940 ON xp
Ive installed a Gigabyte HD 7770 Graphics card. I installed it according to instructions. The card is getting power but after installing it with the CD that came with it, it keeps saying cant detect drivers for this device.This is obvious because of the display Im getting.
Wouldnt be a compatability problem could it.?

Any ideas guys
Rob777
 

A:Functioning error after installing video card

Hey Rob, pardon me but I'm a little confused of what you've said. It says here that you have the ASUS M2N68-AM Plus Motherboard and yet, it still on the classified Socket 940? Not to mention that mobo is running both Socket AM2/AM2+ already. That's a long road for that architecture.

Therefore, you shouldn't be having problems with that Radeon HD 7770 of yours, because it's totally compatible with that motherboard; Unless you have checked inside the system unit if it has been connected properly.

Give me a full spec of your system so that I might help you further. Thanks!
 

http://www.techspot.com/community/topics/functioning-error-after-installing-video-card.179902/
Relevancy 50.31%

I have a D-Link DWA-556 card, says it fits into any PCIe slot. My question...is there any advantage to plugging it in a PCIe x16 slot? Faster speed? Better connection?
I have the following:

Asus P6X58D-E

PCIe x1 - open

PCIe x16 - open

PCI - open

PCIe x16 - video card

PCI -sound (Soundblaster card, not working right...have sound, no EQ, etc)

PCIe x16 - USB 3.0 card.

Does it matter where I stick the wifi card? It'll fit nicely into the top slot.

I haven't been shopping for sound cards yet...any help there? I'm on Win7 (64bit), have a great set of Logitech speakers and want some incredible sound.

Thanks.
 

A:WiFi card into a pci-e x1 or x16 slot

I have a D-Link DWA-556 card, says it fits into any PCIe slot. My question...is there any advantage to plugging it in a PCIe x16 slot? Faster speed? Better connection?Click to expand...

It won't really fit.
No won't make a difference.
Just stick it in the x1 like a normal person.
 

http://www.techspot.com/community/topics/wifi-card-into-a-pci-e-x1-or-x16-slot.154130/
Relevancy 50.31%

Hello to everybody.
I have a intel board s5000vsa and this has an integrated graphic card ati es1000 .
i want to add an external graphic card for for pci e x16 slot.
Can you suggest me anything with good performance with the range 100-200 dollar`s.
nvidia or ati is better?

Thank you jksynapse

A:graphic card for for pci e x16 slot.

well since you have ati onboard ati would be better
first what is the watts on your PSU?
and here are a few good ones
Sapphire Radeon HD 4870 Video Card - 512MB GDDR5, PCI Express 2.0 x16, CrossFireX Ready, (Dual Link) Dual DVI, HDTV, HDMI Support, VGA Support 100247L at TigerDirect.com

Sapphire Radeon HD 4850 Video Card - 512MB GDDR3. PCI Express 2.0 x16, CrossFireX Ready, (Dual Link) Dual DVI, HDTV, HDMI Support, VGA Support 100245L at TigerDirect.com

http://www.vistax64.com/graphic-cards/206819-graphic-card-pci-e-x16-slot.html
Relevancy 50.31%

The SD Card slot on my Gateway computer running Windows Vista does not read my SD Card. I need help, if anyone knows what the problem is thnks!
 

A:Solved: SD Card Slot

We can't tell what the problem is without any info.

Are you sure the card works?
Is it new? Does it have data on it?
Are you sure the card reader works? You've used it successfully before?
What exactly are the symptoms? Error message? Doesn't appear in Computer as a drive letter? Access denied error?
 

https://forums.techguy.org/threads/solved-sd-card-slot.655036/
Relevancy 50.31%

want to buy a new video card but not sure what type of slot my pc has. Have a DELL PIV 3.0 ghz with a green video card slot (other slots are white)

Can someone help me out?
 

Relevancy 50.31%

Not a compatibility question, I'm fairly certain that wouldn't be an issue. The question is about overall performance gain. Looking at a Radeon R9 270, currently have a 5670. Here's a benchmark comparison from hwcompare.com - now I'm not a heavy gamer but I am running a mod on a particular favorite that could use a boost. Thing is, the m/b (being 2.0) can't take full advantage of the card otherwise it might be something of a no brainer. Card has excellent reviews and happens to be on sale.
So there's got to be some people here that have been in a similar situation, wondering spend the coin or not. Lets say the $ isn't an issue, just wondering about what to expect in actual gain.
Thanx.

A:PCI Express 3.0 card in 2.0 slot

Using a PCI-e 3.0 card in a PCI-e 2.0 slot will give less performance but not as much as one would think—maybe no more than 10% less—over what it would have done in a PCI-e slot. However, the newer PCI-e 3.0 card very well may give far better performance than an older PCI-e 2.0 card, even when running on only PCI-2.0.

http://www.sevenforums.com/graphic-cards/335712-pci-express-3-0-card-2-0-slot.html
Relevancy 50.31%

Okay so I have been looking around for a while and found 2 graphics cards I like and I was wondering what slot my motherboard has. Here are the CPU-Z details. I really need to know if it is a PCI-E x16
Graphics Cards:
-http://www.nvidia.com/page/geforce_7800.html (NVIDIA GeForce 7800 PCIE x16)
-http://www.nvidia.com/page/geforce_6600.html (NVIDIA GeForce 6600 PCIE x16)
CPU-Z:
-http://valid.canardpc.com/show_oc.php?id=2400457
Thank you so much in advance! If you have any answers, questions, comments, or concerns leave me a comment and I will try to get back to you ASAP.
 

A:PCI slot and graphics card

It appears the motherboard has the following expansion slots:
One PCI Express x16
Two PCI Express x1
One PC
See here for details: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01357175#N278
 

http://www.techspot.com/community/topics/pci-slot-and-graphics-card.181601/
Relevancy 50.31%

Can anyone help me? I dont want to just yank it out as hard as I can. I'm using the A8N32-SLI Deluxe mb. Thanks in advance.