Windows Support Forum

Touch screen issues

Q: Touch screen issues

My laptops touch screen keeps acting buggy. It shows I'm touching the screen even though I'm not. Little bubbles appear as if I'm touching the screen on those spots even though I am not and sometimes they flicker. Would it be a windows 10 bug or the laptop itself? Thanks
Relevancy 100%
Preferred Solution: Touch screen issues

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 63.64%

After replacing my previous Lenovo Laptop because of my screen going black, my wife purchased this y50-y70 touch as a gift. I only had this since January 2016 and I'm already having problems with this too. I use this as a work computer so it is usually on at least 8 hours a day. The screen has a discoloration at the bottom left corner. It looks like when someone put a magnet next to an old TV causing the display to discolor. Also, the screen flickers a lot. And just today the display turned green.  I've updated all the drivers which didn't have any effect on the flickering. After reading some other posts with similar issues, I went ahead and changed some display settings in the graphics properties. I hope someone can help with these issues. I've had this computer for less than a year.  I currently have Windows 10 Pro installed.
Relevancy 63.64%

Hi -

Do you know that like a mouse, the touch screen does not process until you release? Check it out. Put your mouse over a link, hold down the left button, move the mouse and release the button. Nothing happens. It's the same for the touch screen.

How can I change this? I want the touch screen to activate when touched rather than removed. I believe this is in the mouse setting since it is acting like a mouse and performing the same job. I have looked all over the Internet and cannot find the answer. By the way, we have a HP Touch Smart computer running XP Home Premium.

Any help is greatly appreciated. I need this to help my daughter who has developmental delays. You can get more information about her at The Grub Club® - About Us.

Relevancy 62.78%

My left hinge malfunctrioned and cracked the screen on the V5-571P-6657 notebook. I took it to a shop to be repaired. They replaced the screen digitizer. The touch screen is now jumping all around and there are bubbles on the screen. The shop told me there is nothing that can be done and I have to disable the touch screen. They said the problem is with a driver that can't be updated because the company was sold. This doesn't seem right. The touch screen was working perfectly well until the hinge malfunction cracked the screen. I have spent a fortune to get it repaired and now they tell me I can't have a touch screen. Can anyone give me some advice? I don't know if the problem is with the digitizer board, but know one sells these anymore
Relevancy 62.35%

I love this notebook when I have a monitor plugged in, but internal display is horrible as I cant see anything in many applications because of the 4k resaloution.  Is there a way to have it set so I can read the applications when I unplug my exxternal monitor?  Having to constantly scale every time I unplug is not fun, and I cannot get it quite right. Thanks in advance  

A:Yoga 3 14 inch Touch Screen Issues

Hi scottbroker , 
Welcome to the Community Forums. 
Herewith are some options depending on each scenario you may need it .
How to Change your DPI Scaling Level for Displays in Windows 10
How to Make the Windows Desktop Work Well on High-DPI Displays and Fix Blurry Fonts
Take your time to review and apply it as necessary to your situation.
Update us how it goes.
Relevancy 62.35%

Hi I seem to be having a few rcent issues with the touchscreen response on my Yoga S nbsp Seemed to make through the Windows update last year without many issues nbsp nbsp Touchscreen only works when it's folded less than deg from the keyboard If I fold it back or in to Tent or Tablet mode the touchscreen is not responsive at all Seems like this is a sensor transition issue of some sort If I touch the Yoga 11s issues touch (when screen folding) screen while folding the screen back and forth I can see the transition when it stops responding to touch nbsp nbsp When folded any touch to the screen results in a single touch input in the center-right of screen I see the circular touch input on the screen at that point Yoga 11s touch screen issues (when folding) EDIT - this seems to have gone away for now would appreciate some help with nbsp though this doesn't necessarily bode well nbsp Are there Yoga touchscreen drivers or a test utility I can use to try to fix this nbsp WIndows Intel i - Y CPU any other info I can provide nbsp nbsp Thanks in advance John

A:Yoga 11s touch screen issues (when folding)

Follow-up for #1If I fold the screen in (<90 degrees) and view the computer properties, it say "Full Windows Touch Support with 10 Touch Points"If I fold the screen back to regular laptop mode, it says "No pen or touch input available" If I fold/unfold the screen while viewing the Device Manager, I see the # of Human Interface Devices change from 3 (at folded out) to 7 (while folded in)
Relevancy 62.35%

Hi i'm having problems similar to however this is said to be specific to the LG 14" whereas i have a generic 13".sometimes it works fine, other times is ignore touch clickssometimes when i do a touch scroll it zooms as if i had pinchedall the while there are these circles like what you get if you hold your touch on the screen - it seems to be persisting the touch.the mousepad works intermittently, i guess confused by the simultaneous false signals from the touchscreen any help greatly appreciated
Relevancy 62.35%

Hello everyone So I been sending my All in One desktop to Samsung to find out whats wrong with the touch screen And this is the second time its been sent in in the past weeks Today they called after it being there for about a day and they told me that the touch screen issue is something wrong with Windows 8 of Touch Screen issues any Windows have type and told me to wait until is released They said when the screen is calibrated with the tablet PC settings that is when the Windows 8 have any type of Touch Screen issues issue happens But sadly its the issue still happens But they say it doesn't The issue is when your not using the touch screen it acts like you are and on the right edge of the screen every - mins How I can tell is I have Rapr installed and it takes screen shots of my desktop Also I know there is a issue when you have a screensaver and it turns off every - mins So does anyone know of any major touch screen issues in Windows or is Samsung trying to lie to me about trying to fix my computer
Relevancy 62.35%

I'm having trouble with my touch screen
It worked great at first...then I tried to make it better by...

1) playing around in the gesture options...(task pane)
2) installing synaptic drivers
3) playing around in the touch calibration settings
Now the touch indicator is always 5cm to the "Left" of where I "tap".
ONLY with fingers...

1) the trackpad on the keyboard works.
2) the external (USB) mouse works.
3) the stylus pen works


At this point I think it would be very difficult to "re-trace" my steps...
Especially since the windows 8 "settings" are scattered all over the Metro and Desktop interface...

How can I restore the default Touch settings to my device?
Where can I download windows 8 drivers... for "Surface pro"
All I seem to find are HP, Acer, Samsung etc...
Does Mircosoft have any drivers for their self made "surface"?


A:Windows 8 (Surface Pro) Touch Screen Issues..

K I fixed it...5min after posting

In (desktop mode) control panel...
"Calibrate screen for pen and touch input"
Select "reset"
and it works again
Relevancy 62.35%

Hey guys first off im new to the community cause I just got my first Lenovo about days ago after using HP's for most of my life So 14 Touch 3 Issues inch Yoga Screen far I love it everything Yoga 3 14 inch Touch Screen Issues about it is amazing its got the i processor and the Intel graphics which is plenty for anything I can bring to the Yoga 3 14 inch Touch Screen Issues table But I have had two issues with it so far I havent been able to resolve nbsp Somehow or another after the second day I set my computer in what im assuming is FN key lock or something like that F -F normally would require you to hold FN in order to click while the functions such as mute volume up down brightness adjust etc would be free to click But then after the second day it switched and I prefer it the way it was at first nbsp This one is a little more serious about out of every times I start my computer the touch screen will begin to freak out and act as if something is touching it in like different places at the same time I can see the little touch circles appear all over the screen when my hands arent even touching the computer Obviously when this is happening it renders the computer useless cause everything gets clicked and all I can do to stop it is force shut it down nbsp Any help or solutions would be MUCH appreciated thanks guys Solved Go to Solution

A:Yoga 3 14 inch Touch Screen Issues

bump (I hope thats allowed here D
Relevancy 61.49%

I have recently purchased lenovo thinkpad x1 yoga from Germany. I have tried to install different versions of linux ubuntu in dual boot, but none of them seems to work. It boots from the bootable usb and gives the live ubuntu and install ubuntu options but when you enter then it displays a blank screen and nothing happens afterwards. I am facing another issue pretty consistently that the touch screen becomes unresponsive most of the times. When i use the pen it works fine but it does not works with my fingers. Looking forward to some solution as its pretty annoying experiencing such bugs in such an expensive machine. Thanks
Relevancy 57.62%

Can we replace the capacitive touch controller or is it fixed?

A:Can one capacitive touch screen be replaced by a resistive touch screen?

Can you please provide more details?
What device do you mean?
Relevancy 55.9%

My Ideapad S415 touch screen has suddenly stopped working.  I've had a tech connect to my PC and try a BIOS reload of default settings, plus unistalling all "HID" devices in Device Manager with no resolution.  I've also tried a system restore with no luck. The system properties does see the touch capability. Suggestions? Thanks.

Go to Solution.

A:Ideapad S415 Touch - touch screen stopped working

hi Hersh,
Welcome to Lenovo Community Forums!
First do a Power Drain 
     (If the battery is removable)
            Remove AC and Battery and hold the power button down for 15 sec.
               Turn the computer back on and see if the Touch capability is now detected under System Properties,
                  If not
         I suggest you contact Lenovo Technical Team about the Issue as this may be a device detection issue.
       Lenovo Technical Team
Solid Cruver

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
Relevancy 55.47%

The touchscreen stopped working suddenly on my Envy TouchSmart Sleekbook - dx At first i though it was like a normal failure and that will get fixed by turning the pc off or restarting so I did not pay attention to it until now that I screen- not touch touch... HID-compliant to working, use unable had restart my pc multiple times Currently running win I started to believe it was because of an update a few days ago since it was when the problem started but all drivers and everything is up to date I have checked for the HID-compliant Touch Screen driver and had to nbsp show hidden divices in order to find it I cannot enable it and when i check in the properties HID-compliant touch screen- not working, unable to use touch... the following message displays nbsp Currently this hardware device is not connected to the computer Code To fix this problem reconnect this hardware device to the computer nbsp I have no idea on how to connect or how it got disconnected I come from a similar thread but did not solve my problem I have been researching this for hours and have not found and answer Help please nbsp
Relevancy 55.47%

I bought new, but somehow do not want to workVideo is compared, apparently just enough to buy a new cable bought it here
This is a new LCD
This is a broken LCD
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

A:Lenovo S210 Touch broken LCD and Touch screen

Hi Magnutus, welcome to the forums.
Please check if you Lenovo S210 is on warranty under with this tool.
After that you can open a ticket with Lenovo for the screen to be fixed, if it is not under warranty it will have a cost.
If you are the guys that like to fix it yourself (and it is not under warranty) I can recommend you to check the support site for your model, read the Hardware Maintenance Manual (on the documents area) and check how the machine is organized on the inside. On the parts lookup page you can find the parts number so you can find a replacements for the component that is giving you issues.
I hope this links helps you.
Relevancy 55.47%

Hello nbsp My Thinkpad Yoga is connected to a large display through ThenkPad docking station nbsp screen generates touch while random touch lid... Yoga Its lid is closed nbsp During my work from time to time I see random touch clicks on my screen and random opening of menus nbsp It is clear that the touch screen is active Yoga touch screen generates random touch while lid... although the lid is closed nbsp When I open the lid and still connected just to the nd display large screen display the phenomena stops nbsp Worth noting is that although only the nd display shows an image the laptop touch screen is still sensetive to touch nbsp This is I guess why the random touches show up on the screen -- it feels the keyboard not fingers nbsp I expect the touch screen to be disabled while the lid is closed or when projecting only to the nd screen nbsp The solution of opening the lid while connected to the docking station is not acceptable nbsp Lenovo's local support suggestion to disable touch for the Yoga is also not acceptable -- people purchase Yoga to get Touch nbsp nbsp A solution please nbsp Yaron

A:Yoga touch screen generates random touch while lid...

I am experiencing the very same thing.A driver/BIOS update would be very much appreciated, dear Lenovo.
Relevancy 55.47%

Hello,I am desperate for help. My laptop will turn on. And I can type in my password. But then when the computer loads it takes a very long time and when it gets to the desktop the keyboard, the mouse, the touchpad, and the touch screen won't work. I can see everything on my desktop. But I cannot open anything or do anything at all. How can I fix this?Thank you!!!
Relevancy 55.47%

Hello everyone, my touch screen on my lenovo ideapad z400 touch is not working anymore.  The only weird thing I remember is some ghost touchpoint on my screen. I've been looking for the answer to this issue, but it seems that Lenovo does not address this problem.  If someone has found the solution to this problem and wants to share it with me, I will be forever grateful.  

A:IdeaPad z400 Touch - Touch screen not working

I facing the same situation right now. any solution please. left side of monitor is being "touched"?
Relevancy 55.47%

I want to buy this mouse to better work with my laptop.
Can somebody give me some feedback on how this glas pane works instead of a scrollwheel? Handling, etc.

A:Logitech Touch Mouse 400 for a Laptop with no touch screen

Sorry I can't answer your question, but this post piqued my interest. I use the Logitech 620 touch mouse on a Windows 7 box at work. I find a little touchy and has to tweaked. But I haven't tried the 620 on Windows 8. Because I'm always looking for the perfect mouse, I think I might just pick up the 400 tonight and let you know.
Relevancy 55.47%

Hey everybody nbsp I just received my P last week as a replacement for another Lenovo device So far everything seems to work fine with one exception nbsp Pen... Touch P40 Yoga: ThinkPad / Touch Lenovo Screen When I turn the screen over to the tablet position the touch screen and the touch pen show erroneous behaviour a As soon as I make the first input with the touch pen I cannot make any further input with my finger so the touch input is simply turned off The Windows setting to ignore touch input when the stylus is used is not active b When I try to tap buttons at certain areas of the screen especially at the upper edge the cursor of the stylus starts jumping around and shows up at the lower edge of the screen That means that when I for example tap on the X symbol in the upper right corner to close a window I actually click on some of the symbols in the system tray in the lower right corner nbsp This problem stops occuring as soon as the angle between the two case parts screen and keyboard reaches exceeds approx It does not matter if Windows is in Tablet or Desktop Mode I already Lenovo ThinkPad P40 Yoga: Touch Screen / Touch Pen... tried to manually install another Wacom driver mentioned at https forums lenovo com t ThinkPad-S-Series-ThinkPad-Yoga Wacom-Tablet-Service-for-ISD-Driver-Win and https forums lenovo com t ThinkPad-P-and-W-Series-Mobile P -Yoga-issues td-p I had no luck trying driver versions and nbsp I would really appreciate your help since this issue makes working in the tablet position virtually impossible nbsp
Relevancy 55.47%

Yesterday I was on my laptop and before I shut it down it went into what looked like a different mode. I booted it up this morning and it is still in this mode. It looks like touch screen mode but I do not have a touch screen.  The icons on the task bar are spaced out and there is a back button on the task bar too which is not normally there. When i right click against the task bar, one of the buttons says "Show touch keyboard button".  All of my files are spead out as if to have room for touching if I had a touch screen but I do not. I am finding this very annoying because I cannot get onto my desktop properly and is not in the right mode. Please help!
Relevancy 54.18%

window 8.1 check pc info Pen and touch : No pen or touch input is available for this display No pen and touch in control panel I'm ready install drivers completed  how do I?

A:My desktop B50-30 Multi touch touch screen not wo...

Hi keerati,
Welcome to Lenovo Community Forums!
Check the Touch funtionality in OKR environment.
    Turn off the computer and Turn it back on and right away start tapping F2.
    Select Recovery. Once in the Recovery screen Test the touchscreen by touching any of the option if it will respond.

If the touchscreen works in OKR Environment, I suggest you perform a One key recovery (expect dataloss).
If the touchscreen still did not work in OKR Environment, I suggest you call Lenovo Technical Team for assistance.
Solid Cruver

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
Relevancy 54.18%

My client told me this was a touch screen, so that is what I ordered.  HP 749970-001 touch screen display assembly.It is installed, but not recognized.  In order to use it as a touch screen, would I have to replace the motherboard too?Is there a driver available?  The display works, it is just not working as a touch screen.

Relevancy 54.18%

The touch-screen monitors are probably more expensive than your regular LCD Monitor...

A:Will anyone buy a touch-screen monitor just to use the touch feature? a little more expensive. I think I would get one?
Relevancy 54.18%

Touch screen on our HP Pavilion 23ST Touch All in One PC P2N42AVstopped working after about 6 months. I reimaged and restored it back to original system. To make sure nothing waschanged by any updates that may have been done.I cannot see any options in device manager for the touch screen.Everything else is working just fine but no touch screen functionality. doing F2 and trying component test. Touch screen isn't there.It is like it disappeared.   This id used in a business and it was working 18:00and the next morning nothing.
Relevancy 54.18%

Hi, I've recently formatted my Laptop HP Envy m7-n101dx (touch) and installed Win7  Ultimate (64 bit).  I have downloaded all drivers available on HP website and installed on my laptop.  There is only one unknown device left (acpi\msft010), and I'm unable to to find the correct driver.  My problem is I'm unable to use the touch screen of the laptop, I've googling and found that is there must be a problem with with the Human Interface Device, but when I've checked the Device Manager no Human Interface Device is on the list.  Please could anyone help me out.  Thanks in advance

A:Touch Screen of HP Envy m7-n101dx (touch)

Hello @JeffJadoo, Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your issues, with help from the community! I understand that you are having an issue with the Touch Screen, and wanted to assist you! Did the notebook originally ship with Windows 10?  How did you go about formatting the notebook, and installing Windows 7?  You may be able to use the Recovery Manager to restore the drivers, however, based on how you installed Windows, the Recovery Partition may already be removed.  You can also try reviewing the following document, to see if the information helps: HP Notebook PCs - Touch Screen Issues (Windows 8) Please post back with the results.  It is possible that the Touch Screen may not be supported for Windows 7 on that particular notebook. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!
Relevancy 54.18%

Hi, Just a quick question, we have one hp touch laptop model # 13-a200nx Pavilion series, and it touch has broken. I wanted to know can we replace its touch with non touch screen ? is there any availability?  Thanks
Relevancy 54.18%

I have a kiosk on which I've just installed 8.1 pro. It has an oem touch screen manufactured by General touch (p/n st6001u). I've installed the driver and it seems to work but Windows still says "no pen or touch available". My customers using the
kiosk will need to type on screen in addition to just clicking. Is there any way to for the OS into touch mode? I believe under 7 there was an option in Windows features but I can't seem to find anything on 8. Google has been no help.
Any ideas?
Relevancy 54.18%

I'm on the Driver Download page for the S400 Touch, but I have no idea which driver is for my touch screen.  There are display drivers and mouse/touchpad drivers, but neither of them say anything (at least I don't see it) about the HID touch screen.  Running Windows 7 64bit.  Any ideas?

A:S400 Touch - Driver for Touch Screen

Hi DJwhiteSquall,
Welcome to Lenovo Community!
As per the query we understood that you are looking for the display drivers for your Lenovo S400 touch laptop.
As per the specification of this laptop  has AMD Radeon 7450M Graphics card, however please share the serial number of the laptop through private message as this help us to assist you in better way.
Click here to send the private message.   
Hope this helps. Do post back if issue persists!
Best regards,       

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
Relevancy 52.46%

I bought a Lenovo G50-80 Touch Laptop, but for some reason the touchscreen is disabled and it also says that it doesn't have touchscreen on it.
Relevancy 52.46%

Hi All, some one pls help me.
1.  On my touch screen - left top corner the volume screen shown 0. This is reduced automatically.
2. The touch pad is not working - I am not able to move the cursor but can click where ever it is placed.
3. The keyboard on tablet mode is also not working.
this happened all of the sudden. Is there any virus or some issues with software. Pls help i am really need of a solution here.
Mod's Edit: Additional information added to Subject line for clarity of issue and moved posting to it own thread.
Relevancy 52.46%

So I have got a Lenovo Y50-70 with 15.6" 3840x2160 UHD Touch Display for about two years now. I've accidentaly dropped my backpack, while the laptop was in it and cracked it's screen so I need to replace it. The screen in the cracked part is working as it was working before the accident, the crack is on the glass. So I was wondering if I can replace my 15.6" 3840x2160 UHD Touch Display with a 15.6" 1920x1080 FHD Non-touch Display? Is it possible?I've read that whether screen you are changing, its working depends on the quantity of pins on the Video signal connector. 

14805592_1377320382293084_1940252874_n.jpg ?54 KB
Relevancy 51.6%

I have an acer aspire M3 581T-6405 series ultrabook, but my screen is broken. Can I replace it with a touch screen from an Acer Aspire M5-583P-6428? Whether the touch screen works as a touch screen or not is irrelevant I just want to be able to use my laptop.
Relevancy 48.59%

Asus n56vz laptop

After updating to win8.1 from win7 there is a slight delay from when I attempt to use the touchpad to move the mouse there seems to be a slight delay. I have changed the pointer settings already regarding an inherent delay of mouse movement when the keyboard is accessed. I have restarted my PC just incase the change need a fresh start.

I have also check the drivers for any needed updates using WinKey + x and then right clicking on the options and checking for any updates. No luck. Though I could have just missed something.

It can be from a .05 delay of action to a 4 or 5 second delay of action. It acts as if the touch input was never there, not like it is a tracer of any kind, if that makes sense.

Any help would be appreciated.


A:Touch pad issues.

Hi and welcome to TSF. You could try reinstalling the driver and see if it helps ASUSTeK Computer Inc. -Support- Drivers and Download N56VZ
As you can see last drivers are dated 2012.
Relevancy 48.59%

Hey guys I m having some wacky touch pad issues and I was wondering if any one knows what might be wrong I am by no means a technology expert but I do expect it to be some sort of hardware issue About a week ago regular use of my touch pad was starting to act up I couldn t scroll or make use of tapping left clicking or right clicking When on the desktop tapping or left clicking would bring up the actions panel where I clicked as if I tried right clicking but I still couldn t right click Regardless I would still be able to move the mouse icon around When I plugged in my wireless mouse I could use the touchpad somewhat normally - Touch pad issues I Touch pad issues could move it and tap left click but still couldn t scroll or right click And just Touch pad issues this morning I find out that I can t use the mouse pad - at all None of it will work I can t even move the icon around on my screen Touch pad issues I am relying entirely on my wireless mouse and the portability of my laptop is essentially gone entirely which is a high inconvenience given my reliability on it to take notes in class Would any one know what s going on Or should I have it checked out by a professional If the latter does any one have any suggestions on whom to call for support Thank you for any help you might be able to provide ETA Also I am using an Acer Aspire on Windows If you need any more information just let me know and I will provide it nbsp

Relevancy 48.59%

Hi everyone,

I have a HP G60 100-EM and the touch pad has stopped working for the last week. Does anyone have any suggestions about how to fix this?

thanks in advance!

Relevancy 48.16%

Hello I have a Sony Vaio T-series laptop model SVT CXS running windows As of yesterday the touch TV + OK, SCREEN BLACK to (power OK, fan LAPTOP HDMI OK) screen screen is black it doesn't display anything Laptop powers on lights are on fan makes noise etc I was able to plug an HDMI cable from my laptop to my TV and I am able to use the laptop using my TV screen laptop screen is still black but displays on TV works And the odd twist this is a touch screen laptop so I am able to touch my laptop screen and it makes clicks and moves cursor on my TV for some reason the track pad doesn't work while its on TV LAPTOP BLACK SCREEN (power + fan OK, HDMI to TV OK, touch screen OK) display though Any help would be greatly appreciated If you can give me steps into diagnosing the problem that'd be great I live in a small college town and there is only one computer repair shop and since it's a monopoly he rips people off Charges for a diagnostic if you get it fixed it goes towards the repair if not it's Charged my friend for macbook charger and it wasn't even an genuine Apple product
Relevancy 48.16%


I have a windows 7 touch screen laptop which I am using along with an extended desktop on a secondary monitor. Is there any way I can lock the mouse/pointer onto the secondary monitor but still use the touch screen facility on the laptop itself?

thanks in advance for any help provided.

Relevancy 48.16%

1 have HP 2000 Note Book . It carries regular  Screen . I want to replace it with touch screen.Please let me know it will work or not? thankyou.

A:can you change normal screen to touch screen on hp2000 note...

Hi, What is your HP 2000 ? Please use the following instructions to find out the model/product of your machine:
Relevancy 48.16%

Hey all, I woke up this morning and started using my computer to find that there were white spots on my computer screen that I had not previously noticed. I have had the computer for two years and haven't had any similar issues. There does not appear to be anything wrong with the pixels, as the color changes appropriately - it's just brighter. Furthermore, the bright spots on the screen heat up much more than the rest of the screen, which remains cool. I also noticed that, though this may be a separate issue, the touch screen isn't responding. Here is an image (it's much more noticeable on a white background):   Any help is much appreciated!
Relevancy 47.73%

Please let me know if the Touchpad flaws on HP Envy 17t laptops mentioned in Forums (stopped working e.t.c.) are being fixed with the newly shipped laptops. I am avaiting the delivery of my new customized HP Envy 17t and hope that the touchpad will work properly. Appareently the updated touch pad driver and FIOS is required. Will my laptop be updated prior to the shipment?Many thanks for your help.
Relevancy 47.73%

I bought a E -bit with Windows Pro two months ago nbsp I m having problems trying to get the fingerprint software and tpm module to work nbsp I also have a side problem with the touchpad nbsp It seems that the touchpad has some conflict with the fingerprint software nbsp Once nbsp I install the fingerprint software and get E6230 TPM and Touch Pad issues the pre-boot login to work the touchpad freezes up nbsp The only work around is to uninstall the Dell touchpad software nbsp E6230 TPM and Touch Pad issues The touchpad still works as a mouse but not with all the fancy options nbsp Now the windows logon and pre-boot logon work but the tpm module is still unavailable even though the bios is E6230 TPM and Touch Pad issues set to activated and the tpm v device driver is installed and working and the tpm msc snapin says the tpm is on and ownership has been taken nbsp The Data Protection Access app reports the that TPM is unavailable nbsp Also the NTRU service refuses to start nbsp It keeps complaining about either a different service not available or marked for deletion nbsp On the Dell E support page there under Dell Data Protection there are two application packages but no firmware updates nbsp How do I get the right firmware update for the application on the support page
Relevancy 47.73%

I have bought HP -ac TU only a month ago and 15-ac125TU pad touch HP issues i'm currently having certain problems with the touchpad and blutooth like - The zoom in zoom out feature of the touchpad isn't working at all though it worked initially nbsp If a section of text is selected its selection is fluctuating randomly another thing like If i need to change the size of the text after selecting am trying to go HP 15-ac125TU touch pad issues to the size and drop down box appears and just the time im going to select my choice of the size the size box dissapears The same thing happens when im trying to refresh a page by right clicking and a box appears but the box vanishes before letting me select any option its also giving this message when I'm trying to select and copy a text--- nbsp Window Title Synaptics TouchPad -bit Enhancements Main Instruction Synaptics TouchPad -bit Enhancements has stopped working Content Windows is checking for a solution to the problem Cancel The bluetooth facility is not working as well My laptop is unable HP 15-ac125TU touch pad issues to detect any device Please HELP ME to RESOLVE these problems Thank you
Relevancy 47.73%

Hi nbsp Hopefully this is in the right place Issues Touch Y70 Bluetooth Having some issus with bluetooth on new y - touch Successfully connected a bluetooth keyboard but on reboot this no longer worked Upon investigation discovered in device manager the following Y70 Touch Bluetooth Issues in relation to my bluetooth device nbsp Currently this hardware device is not connected to the computer Code To fix this problem reconnect this hardware device to the computer nbsp Bluetooth is internal to the device so the option to reconnect it is obviously not on the table In the process of troubleshooting I'd already discovered the following an Unknown USB Device displaying the following error nbsp Windows has stopped this device because it has reported problems Code A request for the USB device descriptor failed nbsp The location of this device is Port Hub I haven't been able to ascertain if this is anything to do with the onboard bluetooth but it occurred simultaneously with the fault so feel like it could be relevant I've removed the bluetooth keyboard can't readd it I've attempted to uninstall and reinstall the USB device but the error persists and I've likewise uninstalled and reinstalled all my bluetooth drivers In addition I've tried to connect other bluetooth devices without success nbsp Can't seem to find any additional advice online would greatly appreciate any help nbsp J

A:Y70 Touch Bluetooth Issues

hi J,
Welcome to the Lenovo Forums.
Can you please try the following:
1. Create a system restore point (for backup purposes).
2. Uninstall the Bluetooth Driver.and reboot the system.. After the reboot, the bluetooth device should now look like this in the Device Manager

3. Download and run the Bluetooth Driver installer
     - this will identify the type of Bluetooth Device installed on the system (eg. Qualcom Atheros, Intel, etc.) and it will install a generic Bluetooth driver. If successful, try pairing the bluetooth keyboard and observe.
If everything goes well, try installing the official bluetooth drivers by navigating to the D:\Drivers\Bluetooth folder and check if you can connect the other bluetooth devices.
4. Run Windows Update to get the latest patch and bug fixes for Windows.
Let me know how it goes.
Relevancy 47.73%

I have bought this product 3 months ago "HP x360 Convertible 13.3" Touch Screen 2 in 1 Laptop 6th Gen i5-6200U 8GB 1TB" 2 days ago I found its screen was broken, I think it was dropped on the floor inside its contaning bag. It is still function well, but I want to know can I change the screen or not.    Thank you in adavnce 

A:Broken Screen of HP x360 Convertible 13.3" Touch Screen 2 in...

Hi @Mostafashalaby, Welcome to HP Forums! I have read your post and wanted to help. I understand that the screen is broken, and you want to change it. Option 1: You can contact HP phone support to arrange a repair. To contact HP phone support: please use the following link to create a case for your issue, and contact HP. If you live outside the US/Canada, please click the link to get the contact information for your region. Option 2: If you want to replace the screen by yourself: Please let me know if this resolves the issue by marking this post as "Accept as Solution".  To simply say thanks, click the Thumbs up below!    If you require further assistance let me know and I will gladly do all I can to help. Thanks. Regards,
Relevancy 47.73%

I've had this Chromebook for under a week, and today out of no where it the screen flickers nonstop.
If im doing something like watching a video, then the entire screen does it. What should i do? I have a warranty.

A:Chromebook 13 with touch screen - flickering/shifting screen

I charged the battery, and once it was 100% it stopped happening. Now my touch screen is on, and i can't turn it off no matter if i use the command or change it in the settings. Im assuming this is a touch screen problem.
Relevancy 47.73%

Dear Sir MyHP Pavilion x360 is now broke the screen but i can still use is as nomal but it can not touch screen . what should I do ,  If our smart phone it break the screen it still can use why my Pavilion X360 can not touch screen ? Please help
Relevancy 47.3%

I updated to windows 10 anniversary edition about two months ago and since then, I have not been able to turn off the touch pad with F6 like before when it was running on the original Windows 8 OS. Can anyone suggest what to do to fix this, or is there a driver update that I need to use that I have not updated?
Relevancy 47.3%

So one recently my Lenovo Solution Center is giving me this error telling me something isn't working Here's the error code nbsp Result Code WVC -UL VON Is this affecting my gaming Because I haven't been able to run newer games all too well And this computer has a m That's somewhat new nbsp Secondly the computer has been running really slow recently and not being very responsive It'll freeze from time to time or it won't work Like I tried to open my windows search on windows but it just wouldn't let me Same with the Lenovo Center I had have my a Touch-15ISK... issues Y700 with few I to completely shut it down and relaunch it for it I have a few issues with my Y700 Touch-15ISK... to open it up nbsp Thirdly a question How do I turn off the little pop-up thing when I turn on caps lock or num lock I don't need a notification to tell me I pressed it I know I pressed it nbsp Thanks And sorry for so much in one thread This laptop is somewhat bother-some

A:I have a few issues with my Y700 Touch-15ISK...

Hi KeatonBeutlich , 
Welcome to the Community Forums. 
The best guys that can decipher Result Code: WVC003002-UL7VON would be calling in technical support .
Otherwise you can simply proceed in manually installing display drivers from the device manager (  Intel then 970m) either from the support website or directly from manufacturer.
Related discussions here and here for review. 
For the freezing issue , updating the BIOS can help. Check on this discussion for the steps including the readme files from the support driver site. 
Disabling the caps/num lock indicator you may follow this steps from this article Similar also here or this  this post. 
Let's try it a step at a time .
Update us how things go.
Relevancy 47.3%

I've had my y50-70 for about three weeks now and in the past week or so, I've had issues with the touch/mousepad. I'll be using it and suddenly it just stops. The mouse won't move and won't click, despite trying. Sometimes it takes a few minutes before the mouse finally starts working and usually continues for a while. Usually it stutters before stopping altogether. I've downloaded the updated driver, changed the mouse setting, etc and nothing has worked. It continues to stop working.  model: lenovo y50-70 touchOS: windows 8.1  

A:Lenovo y50-70 Touch issues with mousepad

Adding to this issue (me too function) the mouse is not working at all while typing...
Relevancy 47.3%

nbsp nbsp nbsp I purchased my HP Envy in early July of this year at Best Buy In hours the touchpad began to give me grief It would open the side panel that shows you how many programs are open at the momnt cause the mouse to jump around when I used it would not respond to clicking nd just generally not work I did everything under the sun that I could think about to the pc I uninstalled the drivers uninstalled the entire touchpad reset my pc to factory settings Issues Touch m6 n010dx HP Pad Envy to no avail Within five minutes of turning on the pc the mouse acted up nbsp nbsp nbsp I nbsp returned the laptop to Best Buy in two days and received the same model A few days later I faced the same exact issues This is the laptop that I currently have I thought I could live with it but I am at my wits end nbsp nbsp nbsp I will note that when I have an external mouse plugged into the laptop the mouse gives me no trouble whatsoever nbsp I have an HP Envy M -n dxI'm running Windows x bit Solved View Solution

A:HP Envy m6 n010dx Touch Pad Issues

Hello @Leah_anais  and @sirdoom34 , Welcome to the HP Forums! I understand you're having issues using the touchpad on your ENVY notebooks. Please take the time to go through the following document for touchpad issues: Using and Troubleshooting the TouchPad or ClickPad (Windows 8). Make sure the touchpad is up to date with the following drivers: Synaptics TouchPad Driver. If neither of those work please contact HP Phone Support for service options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.Thanks!
Relevancy 47.3%

I have an Aspire E 15 laptop, not even 5 months old. Tonight rhe pointer vanished and the touch pad appears to be not working, BUT when I tourn the mouse on, the pointer appeears and it works. What do I need to do to get the pointer back to use the touch pad. YES , I hit Fn and F7
Relevancy 47.3%

In the beginning of the year bought laptop in Poland, where i lived at that time. Then i gifted it to my family at Ukraine and moved to Singapore. laptop is still under warranty, but Ukraine support refused repair because it's only Poland warranty. They are right?
Relevancy 47.3%

I don't mean to SPAM this board with the same issue that othyers have previously reported and discussed but this iPod sync issue doesn't seem to ever get solved in any of the threads that I have read I've seen this problem reported hundreds of times and almost always the symptoms are reported slightly differently I think the with Sync iPod Touch... issues reason is that the storage device that the sync software is trying to access is not actually the iPod and the error the user gets is based on what kind of device they have installed that is quot in the way quot I have this problem when I connect to an external WD My Book e-Sata and it has Sync issues with iPod Touch... an assigned drive letter D I disconnect the external drive and the iPod instantly syncs successfully I aslo have the issue since installing my USB-connected HP All-in-One and it used drive letter D for it's internal card reader In either case I can get the iPod to connect and successfully sync just by disconnecting the conflicting device If I have either one of them on then the sync process just hangs or sometimes gives me a device-related error The iTunes log file specifically says that it is attempting to access an invalid un-recognized device I tried changing the drive letter assignment of the external drive and that worked When I connected the iPod Touch it immediately brought up iTunes and synced However if I change the drive letter assignment of the printer's card reader -- the only DLA associated with the printer that I can find -- it does not solve the whole problem The printer then begins to give me a printer scanner error There is no issue between the external drive and the all-in-one printer if the Apple software is not installed It's pretty clear to me that the iPod iTunes installation will assign a device id that is already being used It's also clear that when other devices are installed after the iPod they do not detect the drive assignment already in use by the iPod I just don't know how to get that last little bit of absolute confirmation The iPod Touch by design does not show up on the drive list when connected like the older iPods did and when I look in Device Manager Sync issues with iPod Touch... it just shows it as a portable device without a DLA What I need to be able to do is to confirm the device access assignments for all of the installed devices Does anyone know how I can do that

A:Sync issues with iPod Touch...

Is there anyone here who has an iPod Touch and an All-in-One, preferrably an HP All-in-One, printer working successfully together on a desktop machine of any type and Windows OS?

I would love to hear from you if you do.

I keep plugging away. Yesterday I started with a Windows 7 Ultimate 64 bit build with just the HP 6500 All-in-One and the printer and all of its functions were working perfectly. I plugged in a Sony Video Cam via a 1394 connection and it found and loaded the driver and popped up the dialog to capture the video. The popup occurred just before another popup informed me that the HP 6500 had gone offline. I then turned the camera off and the printer came back on line. I removed the vid cam driver and left the camera off.

Then I plugged in the iPod, after having installed the newest 64 bit version of iTunes, and it detected the device but wouldn't complete the driver installation. I powered down the HP 6500 and the iPod installation completed.

I then turned the printer on and it appeared to work but the iPod wouldn't complete the sync process unless I turned the printer off.

Then I changed the drive letter of the HP all-in-one from "E:" to "G:" and rebooted and it appeared that everything was working. I brought the scanner up but didn't actually scan anything but, still, no disconnect messages. Finally, success I thought.

Today my daughter tried to send a fax from the computer. It started the scan, stopped after only partially scanning and said that the printer was disconnected.

She then rebooted and tried to scan a photo and it did essentailly the same thing -- a partial scan, froze, and then reported the printer offline.


Redmond, WA
Relevancy 47.3%

I just upgraded to Display Touch/Pen 7 Windows Issues Windows Home Premium x I have two monitors a quot Dell WFP-HC which is just a standard non-touch monitor and a Wacom Cintiq UX which is a pen-enabled display I've got two issues which may be related The Wacom is pressure-sensitive but in Photoshop the pressure-sensitivity isn't registering The lightest press creates a line with the Windows 7 Touch/Pen Display Issues same thickness as the heaviest press Also every press results in the little swirling circle Tablet PC thing which wasn't the case back when I was using Vista In Windows 7 Touch/Pen Display Issues Vista I would get that only the first time I pressed the pen to the screen The problem seems specific to Photoshop as I do get pressure-sensitivity in Corel Painter I'm not sure if this is the cause of the issue but when I go into the Tablet PC Settings in the Control Panel on the Display tab under Display Options there's a drop-down menu listing both monitors When the Dell monitor is selected it says quot Pen Input Available quot and gives me a Calibrate button If I choose the Wacom it says quot No Pen or Touch input is available for this display quot and the Calibrate button is greyed out If I click the Setup button under Configure still on the Display tab both screens turn a light grey and the Dell screen shows a message saying quot Tap this screen with your tablet pen to set it as the Tablet PC screen quot with the option to hit enter to move the message to the other display I do that then tap the Wacom but it doesn't change anything I'm not sure if the two problems are related or not I've installed the most recent driver from Wacom and gone through all Windows 7 Touch/Pen Display Issues the steps for calibrating it but it doesn't seem to make a difference I don't know if the fact that Windows things the plain old Dell monitor is the Tablet PC screen is what's causing my Photoshop issues but any help would be appreciated

A:Windows 7 Touch/Pen Display Issues

In case anyone is interested...
Which monitor is listed as being Pen and Touch enabled depends on which one is set as primary. Changing it didn't resolve my Photoshop problem.
However, I took a shot in the dark and disabled "Pen Flicks." That solved the Photoshop issue.
Relevancy 47.3%

As is the default on most laptops. my touch pad freezes when I am typing on the keyboard. If I want to use both of them at the same time (for playing video games, etc), what am I supposed to do to disable the freezing feature? In the past I have turned off "palmstick" in the mouse settings, but with the 5510 I can't seem to find anything like that.

A:Touch Pad Issues Dell 5510

I'd suggest you update the System Setup(BIOS).

After you updated the BIOS then I suggest you update the drivers as well. Please enter your service tag number( or use Detect Product) onto the link below:
Relevancy 46.87%

I've searched for days to find a fix for this problem but i can't seem to find one. My laptop is running window 8.1 and has the include Intel 3.0 Usb Extensible host controller for my usb ports. I have no issues connecting devices, except for my Ipod - which when connected, rapidly connects and disconnects without ever being able to be seen or selected on device manager. I'm assuming the issue is a clash between the USB controller and the Apple media device manager? I know there are no cable issues, as i could use the cable on my Wifes laptop (which is running woefully slow otherwise id use that instead). How can i fix this problem?
Relevancy 46.87%

My computer touch pad doesn't seem to work properly since Ive had it, when i try to use it the pointer moves around erratically if at all.  The strange thing is that when i connect my computer with the Ethernet cable the touch pad scrolls and works perfectly fine, Ive tried uninstalling drivers and reinstalling but still have issues, has anyone seen this before? Im also have issues with the battery not charging, says this is not the recommended battery.... please help
Relevancy 46.87%

Just installed 8.1 preview on the new Acer W3. Runs smooth but there is a huge problem with Internet Explorer 11 Touch (the modern UI version of the browser). Since the tablet is small (8"), I set the page zoom at 125% to fill the screen. Every time I open a web page zoomed to 125% (like for example), the page loads with 1/4 of it pushed to the right and out of view. I can of course touch and drag the screen to center it, but that's a pain to do every time I open a new page. What's strange is when I click "refresh", the page reloads and centers correctly. The issue does not occur using the desktop version of IE11 and it did not occurs at all using IE10 (both modern version and desktop version). Here is a quick video clip that shows the problem:

Help please.

A:IE11 Touch Alignment issues (zoom set to 125%)

I have the same issue with my EXOPC, worked fine with version 8.0.

We'll have to wait for an update....
Relevancy 46.87%

TECRA R940: I have been having problems with my the laptop's touch pad and keyboard.

The touch pad disables and enables itself erratically (usually when typing) and several keys on the keyboard either don't work or work incorrectly (e.g. pushing the T key enables the ALT keys and a T cannot be typed and pushing the 5 key results in 05 being typed).

The catalyst for these issues seems to be related to automatic Windows Updates. I noticed these issues began after an Automatic Windows Update on 19/12/2014 entitled "Critical update".

Now, when I uninstall the most recent Windows Security Update from Microsoft, the keyboard problems are fixed (except for the hyphen key, which doesn't work for some reason).

However, the touch pad problem remains, so using a wireless mouse is now a must.

Should I unistall and reinstall a new driver for the keyboard and touch pad?

A:Tecra R940 - Touch pad and keyboard issues


The keyboard driver cannot be updated or installed because it?s already part of the Windows system.
But from my point of few you should test the keyboard functionality using the external USB keyboard.

In case the external USB keyboard would work properly, the issue isn?t related to the system update but to the internal keyboard malfunction? this would require keyboard replacement.

The touchpad driver should be available on the Toshiba EU driver page. There you can find the Alps Electric as well as the Synaptics touchpad driver.
Relevancy 46.87%

I'm not computer savvy and I am not entirely sure this is the proper place to ask a question for help but I've noticed and dealt with over time that my USB mouse seems to click multiple times I would tap my touchpad from time to time to get exact clicks when needed but ever since I started reorganizing files which includes clicking and dragging I've come across issues nbsp So my USB mouse and my touch Touchpad Laptop and Touch on Y70-70 mouse issues pad seem to have issues with being consistent with Touchpad and mouse issues on Y70-70 Touch Laptop clicking If I hold down the click on the touchpad it might spitter to clicking letting go then clicking again Or it might click multiple times and rarely will it not click I believe I Touchpad and mouse issues on Y70-70 Touch Laptop noticed a difference after I updated to windows and I thought the issue was just my USB mouse with perhaps dropping it on the floor and it developing an issue Could anyone please help me resolve this I believe this is the laptop I'm using nbsp Y - Touch Laptop Lenovo
Relevancy 46.44%

Hi all Not sure if this is the right forum to put this in considering it seems like both a software and hardware issue so let file touchpad PDF Multi-touch after opening issues s just see I just figured out that whenever I open a PDF file whether it be within a browser window I use the newest version of FireFox as a downloaded file or even just opening Adobe Reader on my computer the program PDF file window freezes for at least seconds to a minute or so then unfreezes and lets me continue with my work Everything goes back to normal except for the features my multi-touch Multi-touch touchpad issues after opening PDF file touch pad has such as scrolling and zooming in and out I checked for updates using Adobe Reader s Help Menu link but it said there Multi-touch touchpad issues after opening PDF file were none This issue is pretty annoying because the only thing that seems to solve it is if I restart my computer and it happens at least a few times a week if not more Any idea why this is happening and what I can do to fix it or prevent it Thanks Ceal Laptop - Gateway NV Series - Windows Home Premium nbsp

A:Multi-touch touchpad issues after opening PDF file

Update: Restarting Firefox allows me to use my multi-touch pad again, however the issue is still persisting otherwise.
Relevancy 46.44%

Hi all,

I just figured out that whenever I open a PDF file, whether it be within a browser window (I use the newest version of FireFox, 4.0), as a downloaded file, or even just opening Adobe Reader 9.4.3 on my computer, the program/PDF file window freezes for at least 20 seconds to a minute or so, then unfreezes and lets me continue with my work. Everything goes back to normal, except for the features my multi-touch touch pad has, such as scrolling and zooming in and out.
I checked for updates using Adobe Reader's Help Menu link, but it said there were none. This issue is pretty annoying because the only thing that seems to solve it is if I restart my computer, and it happens at least a few times a week if not more. Any idea why this is happening and what I can do to fix it or prevent it?



A:Multi-touch touchpad issues after opening PDF file

Check your system manufacturer's support site for updated touchpad drivers.
Relevancy 46.01%

Hello nbsp My laptop is HP Pavillion DV se with Windows OS It was working great before a month but all of a sudden the following issues came up The power button of the laptop doesn't turn on off the laptop I have to use a detachable remote to turn the laptop on I don't see blue light on the power key once the remote turns the laptop on The quick play 2. 1. Power work no... Multiple issues switch doesn't Pad Touch touch sensative keys above the laptop key board have blue light in most of them But its flickering red for volume and no indicator on the volume increase decrease touch region Though some have blue indicator red lights none of the touch sensative keys function at present The laptop touch pad is unresponsive It has Multiple issues 1. Power switch doesn't work 2. Touch Pad no... its blue light which doesn't turn red even if the touch pad is locked I use a USB mouse as of now Laptop has audio jacks One for microphone and for headphone The external speaker doesnt have any sound so i have to plug in earphone everytime to listen anything In control panel -- gt under sound -- gt playback --- gt i see speakers and realtek digital output --- gt both show green oscillating bars when an audio is played But the volume key in quick play tab is flickering red all the time nbsp The laptop is fully functional But it would be great if the problems mentioned above gets fixed nbsp Sincerely nbsp
Relevancy 45.15%

Hi every body….any body know what is the best Touch screen software (Kiosk Development Software) please let me know ….thank you.

A:Touch screen


don't have that much expereince with these, but have a look at this site:


Relevancy 45.15%

I'm thinking of connecting a 19 inch touch screen to my system to use Media Center and security camera's in my kitchen.

Has anyone got this setup and if so what screen are you using?

A:Which Touch Screen

it all depends on if you want to be able to use the new "multi-touch" features, if you do you will be very limited to the screens you can buy.
Relevancy 45.15%

Looking into using a touch screen monitor. I use Windows 7 Home Premium and I understand that Windows Touch is available on the version.

If I would get the monitor, do I need to find drivers or are they include with Win 7?

Is anyone using a touch screen monitor now?

Looking at Windows 8, I have been playing with the Consumer Preview copy and it looks like a touch screen would be useful with Win 8 if a person would decide to upgrade to that.


A:Touch screen anyone using

Hello Jack, welcome to Sevenforums!

Touchscreen is useful, and fun. It is by no means neccessary, however. Windows has a standard driver, but for a touchscreen, you will want to look up the driver on the monitor's manufacturer's website. There are 2 different drivers - 64 and 32 bit. Make sure you get the right one according to your system.

If I were to use touchscreen, it would be because of application(s) that require it, or are easier to use because of it.
Relevancy 45.15%

My touch screen stopped working under Windows 8. I tried every step I could find on these forums - disabling the touch screen driver, restarting, updating the driver - with one exception; under Component Tests in my HP Diagnostics UEFI, there is no Touch Screen component listed. It is there under Device Manager etc., but cannot be found in the UEFI. I updated the computer to Windows 10 and the problem remained. I restored the computer to its factory settings and the problem has remained. There is no damage to the computer, which is still quite new, and which works perfectly in every other respect. Previously, the touch screen might stop working and a restart would solve the problem, but it has not worked at all for some time now. Any suggestions?

A:touch screen

Hi there @jtlhughes?,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand you are having an issue with the touch screen. I will be glad to help you. Please post the full product number. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Here is a document for Touch Screen Issues (Windows 8). Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below! Thanks.
Relevancy 45.15%

Beginning with a new OS like 8 seems nice and the product wouldnt be the same without touch tech. I havent got ANY touch equip so maybe one of those fold on screens that usb links the existing screen INTO a touch screen can do the trick? Is there any likely hood of some greatness lost?

A:8 screen touch


I have converted my non touch monitor Phillips 220EW8 21.6 Inch monitor into a touch screen using a 3M touch sensor USB. I have another secondary computer at my workplace which is a HP touchsmart, All I can say It's the same experience you get from the both monitors...If you really interested here is a link..chk it out
Relevancy 45.15%

I have the Inspiron two-in-one and for some reason my touchscreen is no longer working. Does anyone have any suggestions?
Relevancy 45.15%

after windows 10 aniversity update on my acer aspire switch 10, my touch screen is no long working.  Please help.
Relevancy 45.15%

On my Inspiron 15R 5521 the touch screen stop working
Relevancy 45.15%

My touch screen failed to start every time I closed the laptop cover,The only way to get it back was a restart. I fixed it buy going to the intel graphics setup and shut off all the 3D selections. It worked for me its worth a try.
Relevancy 45.15%

My touch screen failed to start every time I closed the laptop cover,The only way to get it back was a restart. I fixed it buy going to the intel graphics setup and shut off all the 3D selections. It worked for me its worth a try.
Relevancy 45.15%

Altough Im disabling my touch screen friver in the human interface driver, it keep returning over and over again and I can't get rid of it. How can I disable it for ever ?  Thanks
Relevancy 45.15%

Although I?m not using Windows 7 OS yet, what it has to offer & all that I?ve seen, it's pretty impressive. I'm in the process of deciding whether to go with the upgrade W7 or purchase a new Laptop/Notebook? One concern or complain I must state. I understand that Windows 7 comes with touch screen capabilities, but ONLY works with a human touch? Being physically disabled & cannot use my hands at all I type by using a head-pointer with an eraser for a tip. Yes, I?m not going to be dishonest here, I?m using an aftermarket touch screen with Vista, but I?m leery on how (or if) I can still use it with W7? I don?t know how, but I would just love to get in contact with a MS Developer to express my views. Am I correct in assuming that the touch screen option requires a human finger touch?

A:Touch screen in W7?

W7 isn't limited to touchscreens that only respond to finger operation but to touchscreens whose controllers identify them as HID touch devices, a relatively new category. W7, like its predecessors, recognizes HID mouse devices, which most touchscreens have been until recently. Treating a touchscreen as a mouse has never delivered the best user experience, as it precludes right-click-on-hold, calibration, edge acceleration, and many other valuable facilities. Consequently, vendor-specific drivers, which do provide these facilities, have been used. W7 accepts most of these drivers. In the WDM driver stack, these are lower-level drivers. To the OS, the device still appears to be mouse. Therefore, none of the new touchscreen-specific features of W7 will be available.

The reason that you might have heard that only finger operation is supported is that W7 recognizes as touch devices only those that identify themselves as HID-touch. Of these, only the ones that generate touch-specific events allow you to use gestures and multi-touch. The two technologies most likely to support these are capacitive, which requires finger activation, and wire-matrix digitizer, which requires an electronic pen. W7 can still use other touchscreens, including old ones, but the new capabilities will not be available.
Relevancy 45.15%

Altough Im disabling my touch screen friver in the human interface driver, it keep returning over and over again and I can't get rid of it. How can I disable it for ever ?
Relevancy 45.15%

Touchscreen isn't working properly. Can't scroll,swipe,enlarge or make smaller. It kinda goes crazy. Open/closes without me touching anything.
Relevancy 45.15%

I'm planning to buy a new laptop but will never be using the touch screen. Will I lose any functionality in Win10 by just using a mouse and keyboard with a touch-screen laptop? Do touch screen models use a different version of Win10?

BTW, I know I can buy a non-touch screen model and may do that, but we're looking for a large screen and non-touch choices are limited.

A:Not using touch screen

There's no problem with that, any icons or tiles are clickable with mouse, just like everywhere else. For touch screen devices there is "Tablet mode" and can be turned off to behave same as any other desktop/laptop. If device doesn't have touch screen, Tablet mode is disabled by default.

Tablet Mode - Turn On or Off in Windows 10

There's no special version of Windows for such cases except for Windows phones.
Relevancy 45.15%

My touch screen on my HP Pavilion 23 all-in-one has stopped working.  I have tried to calibrate it, but can not find the stting
Relevancy 45.15%

I am using a Lenovo IdeaPad S510p Touch laptop (Running Windows 8, x64 bit), and have recently installed updates after not having updated it for three months.
Now I am having issues with the touch screen. It was working fine before, but now it is not responding to any of my input. The drivers seem to be all up to date, and I've installed all the available updates for my PC.
Does anyone have a solution for my problem? I don't want to have reinstall Windows or anything like that, so please don't suggest it unless I really have to.
Thank you!

A:Touch screen help!

Check if is enabled in control pane, you should have option "Pen and Touch"
Relevancy 45.15%

R14 touchscreen works at starting and stops after some time. Still works in other windows. Problem resolves after restart and toichscreen stops after sometime.
Relevancy 45.15%

I have a netbook and a desktop. When Windows 8 comes out, if I install it on my desktop, would I have to get a different monitor to use the touch screen or will it work with any of the newer monitors?

A:touch screen

If you want touchscreen capability, you will need a touchscreen. But I am sure Win8 will also work with the traditional gear.
Relevancy 45.15%

Hi guys, does the hp 250 g5 CND625210W MacBook have touch Screen?

A:Touch screen

Hi, HP 250 g5 is not a MacBook. It is a series of many HP machines.The following one does not have:!tab=specs And I can't work out what is CND625210W from your question . Regards.
Relevancy 45.15%

Hi all,

I have recently aquired two touchscreen machines. They are the control unit for cash registers. They are both fairly low spec:

Celeron 1.2Ghz
256 ram
30gb HDD

Just like to hear some ideas on what I could do with this with focus on the touch screen.


A:Touch screen pc, what to do??

It would be great to upgrade them and then use them as photo editing computers for cutting and painting on images.
Relevancy 45.15%

Hey   People        I  have  touch screen model 15-g019wm with windows 8.1 cant figure out how to use it  i went to my hardware  i went to my drivers i went on hp manual says i have one cant figure out where can somebody help me
Relevancy 44.72%

my touch screen was already in my laptop after i bought it, but i just realized i lost it a few days ago when it was not found at the toolbar. Do you know the reason of that?
now i got it back by following your instructions, but after shutting down and turning on my laptop, it is also not found at the toolbar.
how to solve it? thank you
Relevancy 44.72%

Anyone know if it is possible to use touch-screen technology on a laptop like you can on the pen tablets?? If so, can someone point me in the right direction for the software?? I am currently using a Dell Inspiron 4000 with Windows ME. Any help at all will be appreciated.

Please e-mail me with info
[email protected]
Relevancy 44.72%

My Ideapad Flex 15 had a Windows 10 update a couple of weeks ago. A week to 10 days later, I discovered that my touch screen was no longer working. I've checked the Device Manager control panels and drivers and everything is up to date. I did the uninstall of the HID-Compliant Touch Screen Device & Reboot that is noted elsewhere on the Lenovo Search Results and that simply re-installed the device which still didn't work. At one point I was able to access an update log, which said that the Windows update was done, but below this showed that the update had deleted 2 Lenovo Systems Driver Packages.  Should Windows remove stuff that the MFR included to run the computer?? Has anyone else had a similar issue or have a solution??Any ideas would be appreciated.ThanksJim
Relevancy 44.72%

We're buying an inexpensive Acer Aspire for the office. The new lower end machines now are preloaded with Win8 vs Win7 (unfortunately).

To upgrade the machine to a touch screen would require an additional $150.

We only use the machine for Word, Excel and Outlook--a touch screen is totally unnecessary.

Is there a way to setup a Win8 machine with a non touch screen to use with a mouse (or similar pointing mechanism) and not negatively affect one's use and performance? Also, is there a way to setup a Win8 desktop so it sort of looks like a Win7 desktop?



A:New machine touch screen?

Classic Start Menu is what I use for gaining a start button/menu. It works quite well, google will find it for you, there are also several others available online.

The computer should function just fine with a mouse as it comes out of the box. I have an All in one unit with touch screen and I seldom use the touch. I go to the metro side now and then and use the touch but it is not something I value very much at all. I can use touch to scroll around and move the cursor but the mouse does fine as well in the desktop.