So in February I ordered my kid an inspiron as first computer Later slot, card 11- per supposed have memory tag it it doesnt service is to inspiron but I decided to upgrade inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt the memory and I called Dell and provided my service Tag Dell told me it had a GB memory card and I could upgrade to a GB card I ordered the card and disassembled my computer to find there is no slot to upgrade After an hour on the phone inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt I find out inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt that what I am looking at is one with a fixed memory module I told them that per my service tag it is supposed to have a slot and be upgradeable They told me there is nothing they can do So I say how bout you exchange this for one that has what I ordered They say since its over the days there is no way to return or exchange I said even though its your fault Am I being unreasonable All I want is what I ordered After a few more calls to India One person finally tells me there is a first and second generation of this laptop Ist gen has the fixed and the second has the replaceable So I tell them that per nbsp Dell tag nbsp this is supposed to be nd generation and therefor it was built wrong They again say quot we have a day no Hassel return quot and your over that Any suggestions folks I m sick of beating my head against the wall with these peoplehttp://en.community.dell.com/support-forums/laptop/f/3518/t/19992563
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Here s a VERY strange problem Inspiron s w two G DDR DIMMs installed nbsp was up and running when it suddenly turned off with flashing amber SLOT Inspiron Failure? 660s Memory power light and two-beep code indicating memory problem Inspiron 660s Memory SLOT Failure? When power cycled the same symptom occurred flashing amber amp two-beeps Troubleshooting showed DIMM slot was bad Item on p Inspiron 660s Memory SLOT Failure? of User s Manual If either G DIMM card was installed in the DIMM slot Item on p the system would boot OK Both slots populated Flash beep DIMM slot populated with either G DIMM Flash beep DIMM slot populated with either G DIMM Boots OK After quot fixing quot the system by de-populating the DIMM slot full Dell Diagnostics online version were run with all PASS results Memtest passed as well QUESTIONS How could a memory SLOT not memory card suddenly fail in the middle of operation The system was up amp running but nothing was being done on it at the time of failure Did a part of the chipset fail Is there any way to fix this problem short of replacing the MoBo Thankshttp://en.community.dell.com/support-forums/desktop/f/3514/t/19977521
I've seen this problem reported for other Dell machines for a year now, since Windows 10 came out, but not for my model.
Since installing Windows 10, I can't use my SD card slot to write to, format, etc. a microSD card with adaptor. I can see the drive, read the card, and transfer files from it, but when I try to write I get an error message that the disk is write protected. It isn't. The exact same cards and adaptors work fine in my son's computer, and the cards work fine in my phone.
I just updated all my drivers and it still isn't working. When will Dell finally provide a fix for this? I can't even find any indication that they're working on it.
Okay I did something really stupid It was late I was Memory on laptop A215-S7416 MicroSD the Express stuck Satellite slot Card Card my in in the dark and I wasn t paying attention obviously so here s what happened I had a SanDisk GB Micro SD Memory Card that I was using in my cell phone I wanted to transfer some pics amp photos from my computer to the phone so I decided to stick it in the Express Card slot of my laptop Simple enough right Well being the incredibly smart person that I am I put the micro memory card in the adapter but it was the wrong one So my computer pretty much swallowed it whole I can t MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop get it back out Now I can t use the Express Card slot in my computer AT ALL because the old one MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop is still stuck in there You can t really see it but if you try to put another adapter in there it won t quot click quot It won t go all the way because the old one I lost is still in there waiting to be rescued haha So my question is How do I get the memory card out of my computer I tried taking it apart but I couldn t get the part of where the express card slot is so that was no good There s a way to do this I know I m just not smart enough to figure it out on my own Which is probably a good thing because I might mess it up again lol I have a Toshiba Satellite A -S laptop Any help is appreciated Thanks -Ashley nbsp
I have Dell 1100 laptop that is running Windows Xp Home.
I use a D-Link G650 card to connect to the Internet. Everything was fine until yesterday.
It appears that my card is not responding--the lights on it don't come on when the PC boots up and even when the boot process is done.
My system tray shows the remark "D-link card not found" and I have no connectivity. I rebotted the machine with the same problem. I haven't reset the D-Link 624 router that I use to connect.
I tried another card in the laptop and I got the same results--no lights on the PC card and no connectivity.
Please advise. I hope it's not the actual PC slot on the laptop sice I don't have a clue about how to repair/replace it??? Is it part of the mobo on the Dell 1100??
Anybody have an idea or clue..
d-link isn't exactly bad, but thier products aren;t that good either. my first suspect would be the card itself. can you swap it with a known good model or return it?
I had the spring and plastic door that covers the media card / USB I/O slot on the front bezel pop off. Nothing is broken in my examination the door and posts. I suspect my child was a bit agressive in plugging in their iPOD USB.
What I need is how does that wire spring hook up between the plastic flap and the bezel cover? Not locating any diagram that shows how the spring is tensioned and secured? If someone could point me to a photo or diagram that would be helpful. I may have to hit Sams Club and tear into their display model?
It will be easier to look at this if you remove the side cover, then, remove the front bezel.http://en.community.dell.com/support-forums/desktop/f/3514/t/19301472
I have a Dell Inspiron 6000 laptop and run Windows XP. my memory card slot recently stopped working. I used to be able to insert my memory card from my digital camera and download my pictures and now it no longer works. It doesn't even show up under My Computer under removable storage. Please help!
Put a card in it and:
Look in Control Panel - System - Hardware - Device manager
Expand the "Universal Serial Bus controllers" and see if a USB mass storage device is listed.
Also look to see no yellow ? or ! are shown, indicating missing drivers.
Where is the memory card slot on the Pavilion 550-126? The slot on the front does not look like the right size. Is there a way to get a diagram of the front and rear functions?
Hi, Very interesting. The following link shows its specs: http://support.hp.com/ca-en/document/c04875975 It has 7-in-1 multimedia card readerFigure : View of memory card readerSupports the following cards:Secure Digital? (SD)Secure Digital High Capacity (SDHC)SDXCMemory StickMemory Stick SelectMemory Stick PROMemory Stick MagicGateWith Front I/O portsUSB 3.0: 2Headphone: 1Microphone: 1and Back I/O portsFigure : Odense back I/O panelUSB 2.0: 2LAN (Ethernet)HDMI: 2USB 3.0: 2Audio: Line inAudio: Line outAudio: MicrophoneI believe it is at the front but where. What is your card ? Is it on the list above ? Regards.http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/550-126-where-is-memory-card-slot/td-p/5690390
just received my new stream 11. have barely unpacked it yet! quesition: I know that there's a slot for a memory card - I almost never use a camera, so I'm not totally familiar with that technology. Can anyone tell me what kind of card goes with that slot? What's the maximum capacity? thanks! w
Yes, that will work. -weshttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/which-card-should-I-buy-for-the-memory-card-slot-on-HP/td-p/4834450
I removed my memory card before ejecting it. Now my memory card slot doesn't work at all. I have done it before and got help on fixing but I can't remember how I did it. It is a readable card and I have tried several different ones so it's not a issue with card itself. The computer doesn't even see I am putting it in. Please help I do a lot of photo's and it's annoying to have find the computer plug everytime I need to get the pictures off.http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Memory-card-slot-not-reading/td-p/5789311
My Compaq nx7400 has a pop-out tray on the left side, with 4 slots for memory cards - I think ?! I've tried loading an SD card into the tray & pushing the tray in - but without success..... Anyone know the correct way to use this weird plastic tray thingy ?? Thanks
Hi, I have a new G72-25OUS laptop, I'm wondering how to use the slot on the left side, that says SD-MS/Pro-MMC-XD? I assume its to put a SD card in from my camera to upload photos, do I just stick it in and if so, how do I get it out? I don't have a manual, didn't come with one and can't find info in the help section. Hope someone knows how to do this. Thanks.http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/How-do-I-use-the-memory-card-slot-on-my-laptop/td-p/49651
I have installed the new windows 10 in my PC, before this i had windows 7 home premium. i have a memory card adapter in which i used to slid my micro SD card and was able to access it when i had windows 7, but when i upgraded to windows 10 and inserted the memory card reader in the slot it stopped detecting, their is no action and i am not able to access it.
System: Dell Studio 1558 2010-11 Model.
Dell Studio 1558 has not been tested by Dell for Windows 10 operating system you will not find drivers for it. However, please use the card reader Windows 7 driver and install it in compatibility mode.
Please let me know if this works.
My printer's memory card slot isn't recognized by my computer. I am running Vista. Can anyone help with this. I contacted the printer's tech support and they tried but said it was a Microsoft problem.
Sounds like a tech support answer. What is the Brand and Model of the printer?
In Device Manager under your Printer is there a notification sign?
(NEWBIE/FIRST POST)I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016). Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards. All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer. I currently have all the latest Windows 10 software drives installed. Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?
I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved. The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it. Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you. But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Memory-Card-Slot-Not-Functioning-Brand-New-Computer/td-p/3447370
I have a Toshiba A S running Windows Vista Home Basic the max memory upgrade is X GB which I purchased via no card 2nd memory recongnition Toshiba A135 slot, newegg com and installed When I turned it on black screen and no boot up Basically it will only reconize one GB of memory doesn t Toshiba A135 2nd card slot, no memory recongnition matter what slot as long as it is only one I tested both memory chips both work in the computer and in either card slot just not both chips in both card slots What Toshiba A135 2nd card slot, no memory recongnition the heck Even stumped the Geek Squad guy at Best Buy he seemed to think it the mother board issue It runs much better on the GB then it did with the MB cha Computer Toshiba A135 2nd card slot, no memory recongnition should be able to run both GB card in each slot and reconize about to of the memory if it would run both cards at the same time I did upgrade the BIOS from to as most of the blogs suggested-still won t recognize the nd GB card nbsp
cant find your lappy on toshiba site , same thing happened with me and was the bios update i needed so re check its the correct update
have you tried 1x2gb and 1x what you took out??
ok memory reader card is duo slot? need it help even pro in i laptop possible? stick SD i was bored and got some homebrew for my ds but i needed some files off my psp memory stick and couldnt be bothered to charge memory stick pro duo in laptop SD card reader slot? it is even possible? i need help it as its dead and i cant find the charger so i thauhgt quot ill try it in my laptop sd card slot reader quot and after a some moments later bang autorun pops up with the memory stick icon on it all the files are accessable aswell now my question is HOW DID THIS WORK i looked in the slot and the pins are much to big spaces to fit all the pins on the card everyone know theres a size difference between sd and memorystick how did it work i didnt think there were duel sd and memory stick readers all the usb ones if seen have seperate slots this is memory stick pro duo in laptop SD card reader slot? it is even possible? i need help bugging me as it shouldnt that and i have to get it in just the right place to get it to work it doesnt seem to fit snug in the slot any idea on how the hell this is working thanks nbsp memory stick pro duo in laptop SD card reader slot? it is even possible? i need help
I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016). Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards. All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer. I currently have all the latest Windows 10 software drives installed. Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
Go to Solution.
I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved. The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it. Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you. But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
My video card (ATI Radeon 9800 Pro) no longer works after service pack three, not only does it not work but my computer cannot find it. I cannot find any driver or anything to help me on the internet and my quality is only at 32 bit. If someone could help me out that would be awesome.
yah just a question, and if so give me a price range please for a pci
You can't add a slot to a motherboard.
How old is this computer that it doesn't have a PCI slot? Those have been around for quite a while. Are you sure it doesn't have one? Even AGP is not new technology.
EDIT: After seeing your other thread, are you asking if you can purchase an AGP or PCI video card? That's a totally different question, and the answer would be yes depending on which slot your motherboard has. How much it costs depends on what you plan to use the computer for. A simple one is cheap, and high-end gaming cards can get expensive.
I was wondering as I've got spare slot Mini PCI-Express free on my laptop if such Intel Card ITM could fit inside This technology is quite not expensive actually The mini PCI-E Memory slot on Intel? PCI-Express Mini Turbo Card is very ease to access under Intel? Turbo Memory Card on Mini PCI-Express slot my keyboard and it just have to be inserted and at system reboot Intel? Turbo Memory Card on Mini PCI-Express slot Windows will recognize straight that card and the proper Intel Turbo drivers It does act like quot Windows ReadyBoost quot amp quot Windows ReadyDrive quot under and Vista so the system will load faster boost the disk cache load faster Apps amp perform battery improvement Work on quot Mobile Intel Express Chipset familly quot amp quot Mobile Intel Express Chip Familly quot - gb RD RB no software pinning - gb RD RB no software pinning - gb RD no RB software pinning Any experience in return or it is just like inserting a SD Card in the Card Reader to Ready Boost See also this Post http www sevenforums com general-d robson-pe html EDIT Looks some of you threads seems telling not bothering about gimmick stuff for geek guy That's just annoy me having spare mini Pci-e slot as i won't install an expensive G card I don't need it either
Quote: Originally Posted by NoN
I was wondering as I've got 2 spare slot Mini PCI-Express free on my laptop, if such Intel Card (ITM) could fit inside...This technology is quite not expensive actually.
The mini PCI-E is very ease to access under my keyboard and it just have to be inserted, and at system reboot, Windows7 will recognize straight that card and the proper Intel Turbo drivers.
It does act like "Windows ReadyBoost" & "Windows ReadyDrive" under 7 and Vista...so the system will load faster....boost the disk cache, load faster Apps & perform battery improvement.
Work on "Mobile Intel 965 Express Chipset familly" & "Mobile Intel 4 Express Chip Familly".
-1 gb (RD, RB, no software pinning),
-2gb (RD, RB, no software pinning),
-4gb (RD, no RB, software pinning).
Any experience in return? or it is just like inserting a SD Card in the Card Reader to Ready Boost?
See also this Post:
Looks some of you (threads) seems telling not bothering about...gimmick stuff for geek guy!?!
That's just annoy me having spare mini Pci-e slot, as i won't install an expensive 3G card (I don't need it either!)
With 4 gigs of ram any sort of boost program isnt going to help much since it wont often be used.
Hey i got this laptop about 6 or 7 months ago and it has always had the problem where it wouldnt recognise the micro SD card that I put into the slot.
I have the Acer travelmate 5710 and am using two memory adaptors one is a 'DSE' and a sandisk microSD/transflash adaptor (I have a microSD 2GB card.)
when i insert it, a little remove safely comes up in the bottom tool bar and in 'My computer' there is a little picture of a memory card and i double click it, then it says "Please insert a disk into drive F" and im like, err there is a disk in there (my memory card) Do I have the memory card drive ( F: ) configured as a CD drive instead of memory card drive? Help me please someone.
unfortunately not all laptop use all different brands of memory.
make sure you know the max amount of memory the system takes if you exceed that it will not reconize it and also find out what the brnd was originally and go with that brand but to answer the sd question see if there is a bios upgrae as well as removeable drive drivers on there website. if not you are out of luck. sorry if i got carrie away in the beginning lol. good luck!
I am Using Dell Inspiron N5010. Can I Use Only Single Module 8GB RAM in Single Slot (With One Empty Slot)http://en.community.dell.com/support-forums/laptop/f/3518/t/19983715
I have a AMD Dual slot video card on my Asus M A X-Evo Motherboard It is installed in the first x slot and I also have a PCI-e x XF-I Titanium Sound card The problem I am having is that one of the x slots is covered by the video card and the nd one is open but right smack below the Video card My Video card is the Sapphire slot Question PCI-e dual below slot card video about GHz Edition non OC Attached is a picture of what I am trying to explain My other question is Will this cause issues since one of the GPU fans is semi covered Its it recommended Last question If I move this to one of the x slots below on my motherboard will it cause my x PCI-E slot to slow down Thanks ahead of time for any help you can provide Computer Specs - Asus M A x-Evo Motherboard AM AMD FX Core Ghz Sapphire AMD Radeon GHz Edition GB GB DDR Kingston HyperX memory x GB GB WD Black Edtion SATA HD TB WD Black Edtion SATA HD Sound Blaster XF-I Titanium PCI-E x Sound Card Thremaltake Bronze PS Smart Series DVDRW SATA DVD-ROM SATA nbsp
My opinion ...
Yes, setting up like that will have an impact. The air flow to your GPU will be restricted so it will more than likely run hotter than it did. It may still stay withing recommended specs, but it will run hotter.
The motherboard has onboard sound (Realtek® ALC892 8-Channel High Definition Audio CODEC ), any particular reason why you don't use that? Onboard sound is perfectly good for gaming and the like now, its not like older machines where you needed a dedicated card for decent quality. In my opinion, you only need a dedicated card if you are doing a lot of detailed audio work (mixing, remastering and other specific audio work). This would totally remove the issue.
What was the point of installing it if it messes up your sound? It was working fine before I installed service pack 2 and now I have no sound and your stupid fix program did nothing but waste more of my time. Why did it mess my sound up, and is there anyway to fix this now?
Try updating the sound drivers for your sound card. Realtek is here:
Assuming you have realtek, you'll have a red speaker icon in your systray. Opening the sound tab from dxdiag should also show what sound card/type you have.
Install the drivers, reboot, let Vista install its own driver, then re-run the installation, reboot again and see if sound has come back.
i need to know which know which graphic card will fit for my computer. Ie i want to know which type: DDR ,DDR1 or ddr2 i bought my computer in 2007, but thats not enough to tell.
so please let me know how do i know which pci slot i have?
The type of memory doesn't matter, its the type of interface the computer supports among a few other things to watch for.
You likely have a PCI-Express slot, as long as it a x16 slot it doesn't really matter if its a version 1.1 or 2.0 slot.
Is this for your Dell or another computer? Whats you budget and what needs do you have for the video card?
I have a couple of questions about adding memory to my Dell laptop. Will a standard
"256 MB DDR SDRAM, PC2100 / 266 MHz" card work (bought locally at Walmart or RadioShack) along with the factory installed 256MB?
Secondly, where can I get step by step instructions (with pictures) on how to add the memory?
And where can I get a teeny-tiny phillips screwdriver to open the memory compartment?
got a while ago this mb and cpu.
runs all fine now.
but i got a 128 MB vid card.
Ati Radion 9200 or something similar.
how ever i got
K8NGM2-L (GeForce 6100 + nForce 410)
[Onboard 10/100 LAN]
is it that it has Nvidia chips on it. that is wont let me use my AGP ?
atleast there is some AGP slot.
and the card fits in.
also i checked Bios and did find something. that sounded like "Disable onBoard IF Video card is found."
or must i really drop one of those pci express vid cards in it to make it work ?
I bought 2 of1gb ram for my PC, it looks like this, it's from Crucial with small bits of stuff in packet looks like paper.
That is memory, but what is the problem?
I can't tell from the picture?
Was it wet? Damaged?
Or are you trying to figure out if it goes to your particular machine?
Then we need details about your machine to know?
I had installed windows xp professional as new and all the hp/compaq nc6000 drivers from the HP website. Everything works except the feature provided with the laptop the sd slot to copy data from doesn't. Before the new winxp installation, the laptop had winxp professional and by just inserting the SD chip the computer detected it. Then, it provided a letter for the drive to access files in the chip. Now, it does not see it at all. No indication of the chip when inserted in the computer. The chip is fine as I tested it with an external reader. There are no drivers if any listed that I could see on the HP support website for the SD chip. I have installed the usb, touch mouse/keyboard drivers. The SD slot does not read the SD chip. Please help
hello, does the new inspiron 13 5000 (the one with infrared camera and without pen slot) have extra m2 slot for adding ssd ? or is there only one slot which is taken by wifi card?
It doesn't -- you can have only one internal drive.http://en.community.dell.com/support-forums/laptop/f/3518/t/19987699
I just bought a 32mb pci video card to replace my onboard one. I formatted my comp so that I could get maximum performance, but it isn't making any difference. I might as well go back to my 8mb onboard card! I thought getting a new card would boost the performance with games by a thousand times (not literally of course, but I thought it would make a huge difference).
A PCI video card is little (if any) improvement on the on-board one in many cases.
You need AGP (if you have a slot for one) or the newer PCI Express (sockets are only on newish motherboards) to get an improvement.
The PCI bus (like your PCI card) runs at the same speed as the on-board video. AGP runs up to 8 x faster.
yes or no ?? will this have a bad effect on the computer ?/ any info is appreciated
hello i recentely brought a dell inspiron nd hand did a CPU upgrade cpu Q now i wanted to use my tv tuner in the dell for mediacenter purposes the only problem is windows does not nbsp really detect it the model i have has support for PCI-E X tv tuners ------------------------------------------------------------------------- the bios does detect A card and says that i have to change the video-settings i changed them to onboard so i can boot up the system --------------------------------------------------------------------------- the problem is that i cannot install any drivers for the card using the official DVD s since no drivers are detected nor is the card detected under device manager ---------------------------------------------------------------------- specification list SSD GB kingston CPU intel Q ram GB official in 330 tv Dell inspiron slot tuner PCI-E stock ram tv tuner http www hauppauge de site products data hvr Dell inspiron 330 tv tuner in PCI-E slot html nbsp EU version bios A latest version ---------------------------------------------------------------------- what kind of steps do i have to take to make the TV tuner functional in my dell inspiron best regards darknessbladehttp://en.community.dell.com/support-forums/desktop/f/3514/t/19973694
I purchased an Inspiron 11 3147 with what appears to have a non K-Slot security slot. However I have been unable to find out what kind of slot it is. Along with the laptop I bought a Kensington security cable (Dell part number A5883764). The bar on the cable is too wide to fit into the slot on the notebook. The cable fits fine into my other devices with a k-slot. The only explanation I can come up with is that Dell just didn't make the slot big enough, which I also find hard to believe.
I opened a case with Dell, but the support tech was not able to find a compatible security cable and advised that I contact Kensington.
Attached is a picture showing the slot and cable.
Has anyone else had similar problems?
I recently received my Dell Inspiron 13 7000 and I had the same problem with my Kensington combination lock.
Researching information in the web, it looks like Dell changed the security slot to a shorter one (Noble security Wedge) for some Tablets, Ultrabooks (including Dell XPS 12) and Inspiron 14 (7437) - 7000. There is not information for Dell Inspiron 11 3000 or 13 7000 series but as I can see in some pictures the size of the slot is the same that the Inspiron 14 7000.
The new slot is using Noble security Wedge (Manufacturer Part# : TZ08 | Dell Part# : A6451164) and the link to buy it in Dell store this special security cable is:
I will buy this cable hoping it fits my Dell 13 7000.
Hello Got the Dell Inspiron - Standard with gb inch HDD Inserted a Kingston inch HDD works fine Now days later I also inserted a M Sata SSD nbsp Both Disks work But when selectign legacy boot and first selecting the second HDD it does not boot up the nd HDD nbsp It gives an error Will 2nd Slot Inspiron first 15-7559, M.2 over only HDD boot Dell message saying boot Dell Inspiron 15-7559, Will only first boot M.2 Slot over 2nd HDD msgr is missing Tried - Legacy mode Secure mode on and off- Turning back to Uefi mode with secure mode on and off- Legacy mode and all kidns or boot orders When I press F at startup and go to boot selection and select nd HDD there is no problem it boots up my inch ssd no problem Now I installed windows also on my M Sata SSD and this one boots up fine in legacy mode No issues at all nbsp But also now when setting nd HDD first it still boots up the m And once again manually selecting the nd HDD at startup works fine I would like to use the inch ssd as boot device and the M sata as storage I have my reasons for this lol nbsp Can anybody supply me with some advice help Thanks in advancehttp://en.community.dell.com/support-forums/laptop/f/3518/t/19980882
I have an dell inspiron 15 (3521) pc with i3 processor.
What is the maximum RAM in can install per slot and in total on this laptop?
In the technical specification manual under the Memory heading it is mentioned "Configurations supported - 2 GB, 4 GB, 6 GB, 8 GB, and 16 GB". What does this means? Is it per slot or on the whole?
Should I always install same capacity RAM on the two slots (like 2x 4GB) or am I allowed to mix up like one 4GB and one 8GB?
Two 8 G DDR3L soDIMMs, 16 total. Yes, the modules should be matched.http://en.community.dell.com/support-forums/laptop/f/3518/t/19994428
I Purchased this Laptop few years back. Now it stopped working suddenly. Am in India right now but when i consulted the Dell Exclusive store here they say its not repairable. Kindly suggest. I never fell down nor got damaged by any external source. I wanted to get it repaired or may be send it back to recycling if possible.
We cannot assist without knowing why the shop said it's not repairable.
How old is "a few years"? Any system more than three years old likely isn't worth a major repair such as a replacement system board -- even if a board is available.
This is a low-end system -- if it requires a mainboard change, it's likely not worth the repair, as the shop has told you.
I am trying to buy some RAM for a Dell Inspiron 1100 Laptop. On the crucial website it says that each slot shouldn't exceed 512 MB of RAM. It says there is only a maximum of 1 GB of RAM for this system. I wanted to get 1 GB of Crucial RAM for $32. The only issue is that the RAM comes in a 1GB Module. If I was to buy two 512 MB Modules the price wold be around $15-20 more expensive. Does it really matter if I put in a larger RAM module than what Crucial says the system should use. Any Thoughts would be appreciated.
If you bought that 1gb stick, your laptop would only recognize 512mb.
You'll have to do what crucial says.
Lately, My laptop is very slow in recognizing my usb stick, or my Hard drive (usb 3.0) or my sxs cards through my express card slot. It 's also slow in recognizing my sd-cards through my card reader. I have a very fast laptop. A lenovo W530.
I just started a while ago, and I can't get it to recognize faster . Everything else works just fine and fast.... but it takes up to 4 minutes to recognize these things.
Can somebody help?
Hey tidri. 2 things come to mind if it previously worked. One is a reinstall of all the drivers for the mobo, and the other is a full AV/Malware/Rootkit scan. If everything checks out, a full format and an OS reinstall would be my third move.
i have done a lot of googling and i still don't understand what are they good for but i have a feeling they r some sort of old data storing devices like the floppy disks. anyway here is the picture of the smart card reader http://www.mega.pk/items_images/4962Dell_Latitude_E6420_496a.jpg its the long horizontal slot . i read a lot of confusing topics of people talking about smart cards of phones and cameras , im interested in knowing what the laptop smart card reader is good for , or the other thing the pcmcia ,
I hope this can help someone with the same problem http email protected This pattern is over everything it s not like the problem many others have had with horizontal up pattern:faulty Inspiron screen agp Messed the slot? 8200: connection to lines etc marking broken graphic cards I have narrowed down Inspiron 8200: Messed up screen pattern:faulty connection to the agp slot? the cause for this to the pin under my ATI Radeon Mobility or the AGP slot on the motherboard I opened the computer took of the keyboard and applied pressure to different parts with a rubber tool The one place having Inspiron 8200: Messed up screen pattern:faulty connection to the agp slot? an effect on the overlay pattern was when i pressed on the screw holes on the right side of the graphics card closest to the agp connection It even dissapeared when i pressed hard for a while It is very sensitive so it came back from pressure on the keyboard later There s a glitch here There is no heat problem as i thougth before the heatsink under the keyboard is touching the thermal gap filler on GPU And the temperature is fine Functionally the card passed all tests No broken graphics I remember another tech support guy mentioning how many graphic glitches he s fixed by cleaning the agp slot and pins on graphic cards If noone else comes up with an idea this is my last hope Any recommendations on what to use for cleaning nbsphttps://forums.techguy.org/threads/inspiron-8200-messed-up-screen-pattern-faulty-connection-to-the-agp-slot.654994/
i finally got pass the password screen....i can access and all....but after checking the laptop, it boots but it says it cant find any boot devices....it doesnt detect cd hdd or floppy....it boots from network though, but i dont know it i have to configure something else here....y press the cd button and it doesnt come out....hdd doesnt start if i put me ear close to it theres no spinning sound...
i checked the bios for boot devices config, a marked everything (it got an arrow before it after pressing the spacebar, is it well done?) but it only goes to network if i connect a cable
what could be happening here? any secret switch or maybe bios misconfiguration?
thanks in advance.
by the way, is a dell inspiron 8000
if you connect firmly HDD,CDROM and floppy and still the laptop doesn't want to boot - then this is southbridge faulty. only chip replacing will helps.
AFAIK, inspiron 8000 is Pentium4 based laptop.... so, 82801CAM(or 82801DBM) is your problem.
other day my computer made loud long Beeps at Post Google listings said dram problem I normally run gb of ram in a - configuration I removed the card from B and then my system started fine with just one card in A wondered if it was just the card its-self so I placed the removed card into slot A still started up fine with just one card original B card installed in A then I placed other card which was originally in slot A into slot B to be memory bad slot B1??? back to - again back to long Beep at Post again as long as i leave B empty then my system starts fine motherboard manual says i have to have a card in A and B for duel channel to work--- right now i only got gb showing on start up page looked at System Device Manager and found a funny thing no yellow markers shown but -----all my Nvidia nForce bad memory slot B1??? Ware slots bad memory slot B1??? show quot no driver installed for this device quot but under the quot driver tab quot each shows the driver name and version listed driver update wizard for each said quot the correct driver software program was installed quot ran quot scan for hardware changes quot --- found nothing here is list ---Direct Memory Access Controller bad memory slot B1??? High Precision Event Timer nForce Memory Controller listed twice Numeric data Processor Nvidia nForce PCI System Management PCI Standard RAM Controller listed times Programmable Interrupt Controller System Timer all with no driver installed but driver name and version listed under driver tab did go to Nvidia and run their motherboard driver tool downloaded recommend program and after install and reboot no changes is my B ram slot problem a side effect of hinky windows os over time or is it just my motherboard dying of old age power supply old age should i do a complete clean reinstall of Vista ran Repair from my OEM disk which says no repairs needed build data---- P N-D ASUS motherboard GB Western Digital blue SATA HD No-Raid Intel socket Core Duo CPU Nvidia DDR GT GPU OCZ DDR mhz RAM running at GB at present time OCZ watt Power Supply Vista OS i built system in with no major problems until now replaced DVD drive and Viewsonic monitor---both quit working over last few years sorry about the edit have new DVD drive and monitor for awhile nbsp
When inserting memory module on the memory slot it was not aligned properly. When i turn on the power i noticed smoke and i immediatly turned off the power. Removed memory module and half of it was burnt, now my question is the memory slot damaged? Because its slightly burned in the inside slot, could i install a new memory module in that particular slot? or do i have to change the memory slot thats on the mother board?
You are probably lucky if you didn't kill the whole board. The slot is most likely toast. If you were brave enough to try another stick in the same slot, it may not work, or it may burn-up something else. I don't think changing the slot is really an option. Motherboards are not exactly repairable items.
Hi I have a problem where my microphone do
doesnt actually work what it does when i try to talk anywhere ,such as a game or skype, is that it will playback all of my computer audio(Ex if im talking to someone on skype they will hear themselves instead of me) ive tried many things such as getting a sound card and messing around in the audio device setting in windows 10 but nothing seems to fix it. I am slowly losing hope. I am pretty sure this is a software problem but i cant seem to put my finger on what it is.
My computer specs:
MSI Gaming 5 z97
16 Gigs of Kingston HyperX Fury Ram
240 Gig Sandisk SSD
Generic 2 TB Toshiba 7200 RPM HDD
Generic (Rarely Use It)
guys i have a inspiron e laptop with windows vista ultimate original from nearly months sometimes a new desktop screen with windows classic theme appears n some times net connection is also disabled n when i try to refresh the page it shows the location is unavailable i have a bit defender original antivirus n it never showed any virus but i had a small doubt that this is because of virus so i tried to reinstall vista whenever i tried to boot the system with the dvd nothin happened and the system booted in the normal way i checked the boot options everything was alright so i tried to install after loading windows even then most of the time the dvd drive wasn t reading the dvd n showed no disc the dvd is in perfect condition with not even a single scratch n its working fine in all other laptops on top of that all other dvds are working fine n the prob is only with the windows dvd this made me think that the virus is preventing me from installing windows sometimes the vista dvd worked but once i try to select the location where to install windows it shows nothing to doesnt laptop Inspiron start e1505 select n something like no location is available so finally i removed the hard disk n formatted it by connecting to the usb port of another laptop using some connector n again placed in my laptop n tried to install vista again this time it showed boot manager missing n the dvd never loaded earlier once in a while it worked now everything is gone this is my mom s laptop n she s very angry now i need to get it to working condition soon i m feeling very bad what exactly is the prob with my laptop Inspiron e1505 laptop doesnt start and how can i rectify it can some one help Inspiron e1505 laptop doesnt start me plzzzzzzzzz much thanks nitin nbsphttp://www.techspot.com/community/topics/inspiron-e1505-laptop-doesnt-start.151812/
i have a dell inspirion 1100 and the battery broke and wouldnt retain charge for longer than 20 mins and then the charger broke so, i dieced to buy a new charger and battery from ebay. The charger works because the old battery worked on a/c power. however when i put in the new battery the computer says that it doesnt recongise the battery and will not charge at all.
please can someone help me i am stuck
thanks very much
P.S the battery is an espow battery if that helps
Did you make sure that the new battery was designed to be used with your model laptop?
Can anyone tell me where the RAM expansion slot is on a MITAC 7521 laptop, I can't find it. DOH!
look at the manual or call the manufacturer.
I have an IBM T30 laptop which has 2 slots for memory. Which is the primary? I am adding a 512 mb memory module and I want to know which slot should contain the 512 and which
one the remaining 256. BTW, even though I have a 256 in each slot most of the time it only
recognizes a single 256 module. Thanks for your info.
I have a Tecra Laptop running Windows XP Professional The latptop has two slots A amp B in which you can add MB of memory each When starting Problem Slot Memory up the PC with both modules installed I get the error message quot Windows could not start because the following file is missing or corrupt system drivers pci sys You can attempt to repair this file by starting windows setup using the original setup CD-ROM Select R at the first screen to repair quot I have done as indicated and done a full repair on Windows XP but still get same message I then went to Microsoft Memory Slot Problem com to search the knowledge base According to Microsoft the above message indicates quot This issue may occur if your computer contains a hardware component that is either damaged or is incompatible with Windows XP quot I followed their instructions and it turns out that if I put just MB in memory Slot A the Memory Slot Problem computer starts up fine If I add it in MB in slot B I get the above problem At first I Memory Slot Problem thought it was a bad memory module but if I switch them they will both start up the computer in Slot A when used by themselves So it appears to me that Slot B is the problem somehow Any thoughts or assistance greatly appreciated nbsp
I have been building computers for years and never found a reason for the placement of the memory slots on a motherboard. If you look at a board that uses an Intel CPU, the slots used are1-3 and/or 2-4. If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4. Does anybody know why this is? No, I'm not trying to make a better motherboard, I'm just curious enough to finally ask.
Thanks for any info anyone can give.
'If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4.'
refer to the MSI K9N - which see;
Dual channel with slots 1/3 or 2/4.
Assuming that you installed 2 Gb in 4 modules of dual channel ram and it is used from byte 0 to 2047 linearly, then assuming that the average 2 Gb ram install running XP uses about 50% of the Ram running avg8 (as example), you would get heating in ram modules 1 and 3 and none to speak of in 2 and 4.
Thus, heat separated components and better cooling.
HEY GUYS GREETINGS i just joined earlier today im seriously in need of help my friend ask me to fix his pc i tried to replace the memory with mb ddr with his original memory mb and a mb of ram just then when replacing it and turning it on i heard a huge quot beep quot then i immediately shut the pc down then when i check it up i saw i slot, help Fried memory quot black spot quot on one Fried memory slot, help of the memory slot i figured it out its fried up luckily the mobo has two memory slot only one of the slot had been fried i replaced the two mb with the original ones the problems now is that the pc is kinda slow in starting up showing the bios and showing a quot blue error screen quot after and sometimes restarting over and over again i really need your help guys really really need it im counting on this site for any help you can give thanks raj philippines nbsp
You not only fried the memory slot, you have damaged the motherboard
So recently my colleague tried to upgrade the RAM in his laptop, but he ended up messing up really bad he actually broke the only memory slot on the motherboard (yikes!). He asked me to take a look at it for him, and I was pretty surprised how badly he had messed it up (as in there's no way it could be fixed). I told him he might have to replace the entire motherboard, but he really can't afford that right now. I let him know that might be his only option, but I decided to ask here before giving up. The rest of the motherboard is fine; only the memory slot is broken. So is it possible to replace just the memory slot without replacing the entire motherboard? And if so, can anyone help me out with doing this? He does really need his laptop, so any help would be awesome.
How long can he go without a laptop?
That is a big project. You will need to be a master with a solder gun. Just getting the old part off without melting the motherboard will be an adventure. There are a LOT of pins.
First you will need to find the Brand and model # of the motherboard. You can use CPU-Z for that - it will list the info on the third tab.
Then, armed with that info you will search for the RAM SOCKET replacement. This is where it will get interesting, as the available sources will be in Asia. Shipping will kill you (for a $3 part). And you will probably need some translation skills too.
Your colleague really couldn't afford to mess his RAM Socket up. Now his best bet is to buy a new laptop.
I just purchased my computer yesterday. I removed my Sony Memory Stick PRO Duo from my digital camera and was going to download them to my computer. The slot came with a Dell piece. My memory stick is too small. It did not come with an adapter and I have no idea how to get it installed. Any ideas???
It is likely that the two aren't compatible.
What model Dell do you have? The type of adapter that you need depends on what slots your Dell has.
Also - most cameras come with a USB cable. Could you use that instead?
actually, i was used to a pc with 160mb-ram - which is 32 + 128. now i own a faster one with one single 512mb-slot. but unfortunately, some problems occur: gta3 is collapsing all the time, i cannot copy a normal 1024x768 .tga-image to clipboard via corel (»low memory«) and after watching some freshly downloaded quake3-bots i got the message »low memory«, too. sometimes, even some multitasking surfing can bring me up to fully busy memory - is this a technical problem or am i asking for too much power!? i heard something like this memory-damage would lead to the problems i have.
speaking against it is a rather stable quake3 while in game and a fascinating stable 1nsane played also in 1280x1024 - without any stinky problem.
thanks and regards,
The memory module might be faulty or motherboard might not support 512M modules
I have a dell dimension 9200 and the motherboard can handle a maximum of 4gb of ram, but is there a limit per slot?
In other words does it have to be 4 x 1gb sticks of ram or can I use 2 x 2gb sticks?
The reason I ask is that I've had lots of bsod and crashes recently and after performing lots of tests using memtest it seems that 2 of the ram slots on my motherboard are bad meaning I only have 2 good ones to use.
RAM Memory Upgrade: Dell, Mac, Apple, HP, Compaq. USB drives, flash cards, SSD at Crucial.com will provide that answer for you.
According to crucial
Each memory slot can hold DDR2 PC2-5300, DDR2 PC2-6400 with a maximum of 1GB per slot.
My motherboard just went out on my pc and I was wondering if there is something that I can hook up to my laptop that will let me read whats on my pc memory, kind of a external memory slot or something. I've been searching google for a few hours and I can't find anything and I know you guys always know what your talking about and answer very quickly. Any help would be appreciated.
Your actual data is not stored in the memory, its stored on the hard drive. And it's very easy to connect a hard drive to any other PC, there are many adapters for this.
Here's a version that simply connects a drive, either SATA or PATA(IDE) to a USB port without any enclosure: http://www.newegg.com/Product/Product.aspx?Item=N82E16812232002
Here's a version that basically converts the drive into an external drive that you can safely use that way: http://www.newegg.com/Product/Product.aspx?Item=N82E16817388017
This one only supports SATA hard drive with a connector like this: http://www.google.ca/imgres?hl=en&s...dsp=35&ved=1t:429,r:0,s:28,i:160&tx=102&ty=76
More enclosures to choose from: http://www.newegg.com/Store/SubCategory.aspx?SubCategory=92&name=External-Enclosures
it seems that the memory stick slot doesnt work anymore. in the device manager there is a yellow question mark and it says that it it not working. i would try installing the drivers but i kinda lost the recovery cd or what not. well before when i bought this, VAIO PCV-RX580, it was using Windows XP Home and now i use Professional. not sure if that makes a difference. im just wondering is there anyway i can get the memory stick slot to work again?
Try updating the drivers from here, search for your memory device.
This is a hardware question for anyone that can help me out. I have tried to upgrade the ram in a dell dimension 5150, after seating the additional ram one of the existing slots containing ram started smoking with an obvious plastic burning smell. I have removed all ram and the burning is still occurring when powering on accompanied by a loud beeping noise. It's clear that one of the slots is melting. Need to know what my options are now. New board, or can this be rectified. Obviously the slot is now damaged and can't be used but there are three remaining. Never experienced this and unsure what has caused it to happen ? Any help would be greatly appreciated.
Please place your system specs, that way we could help you easier.:
System Info - See Your System Specs
The beeping noise, is it a one long beep? Or is it accompanied by another long or short beep?
I was told by Lenovo that one slot will accomodate 1 gig of memory, instead of using 2 half gig sticks. I was also told about something called "memory boost" as an external memory source to increase memory. has anyone heard of this? I want to run PhotoshopCS and need 1 GIG of memory and don't want to get new motherboard(the machine is long out of warantee). can anyone help on this issue?
"readyboost" is a feature only available for Vista, where it can use a USB memory stick as an alternative to paging back to the hard drive, it's not really in place of RAM.
Hi,my name is fajar from indonesiai want to add new memory to my laptop HP 1000-1b09auin CPU-Z, my laptop have 2 memory slot,but, i can't find other memory slot where is the other slot ? Thanks for help Best Regards,
Hi: If you look at the illustration in chapter 4, page 52 of the service manual, it appears that the memory slots are stacked on top of each other. http://h10032.www1.hp.com/ctg/Manual/c03762978http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/I-Can-t-Find-Other-Memory-Slot/td-p/5655384
My Hp Pavilion g tx did not pose any problems for years But a week ago I upgraded my RAM from to gb The shopkeeper inserted hynix gb nbsp ddr ram So Can Other... one I ram 8gb 4g in to my slot. upgrade memory ram that makes two rams in my loptop nbsp - Samsung Came when I purchased laptop years ago - gb ddr Hynix b ddr nbsp After a week my laptop stoped working Showing it two service center they said one of my nbsp memory slot is damaged and can't be used nbsp So now I had only one memory slot active with gb ram inside it My Question nbsp is - CAN I INSERT GB RAM IN ONE MEMORY SLOT SINCE OTHER ONE IS DAMAGED nbsp OF MY PAVILION G TX MOTHERBOARD nbsp If yes then please tell me - Of what type of ram should I be looking for Sepecification From where should I buy Crucial got gb ram which I can't usePlease reply ASAP nbsp Thanks amp RegardsPrince Sonihttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Can-I-upgrade-my-4g-ram-to-8gb-ram-in-one-memory-slot-Other/td-p/5714534
Hi. I have recently aquired a very old computer (8-9 years old). I am looking at replacing the old agp graphics card because it is not working properly and then sell the computer for quite a low price. Any way.
I have looked in the case and took the card out and I belive that the graphics card slot is agp 2x. The card has two slots in it leading me to belive that it is a universal 1.5v 3.3v card. I am just wondering what cards my computer would accept and whether a 4x card would work ok in a 2x card slot.
Any help apreciated.
ive been trying to figure out this problem for weeks, pretty much tried everything, i need some help. please. i tryed clicking The Dell wireless WLAN card utility and it reads, "there are currently no wireless adaptors availabe and enabled, i also wento to device manager and next to all my network adaptors there is an exclamation mark, can somebody help please..
moved to network
device manager and next to all my network adaptors there is an exclamation mark,
sounds like a driver issue
goto this site and choose the OS and network and download and install the drivers
Drivers & Downloads
Ive seen 1 post about a similar problem but noticed you guys never really paid attention to his post.
tired adjusting the settings under the touchpad application, no success
tried uninstalling from device manager, no success (software doesn't want to uninstall)
tried looking for software in programs and features, found nothing
tried to overwrite existing software by downloading the drivers again, install fails
Ran diagnostics on mouse and keyboard, just keeps running for over 30 mins and i cut it off maybe im not doing it properly
please help guys
Please help guys
I had same issue, and solved with this: downloads.dell.com/.../Input_Driver_FGG85_WN_8.1200.101.214_A02.EXE
Hi , just wondering , I have a 4GB laptop (dell inspiron n5010) with i3 350 processor and 500 GB HD ... lately I wanted to play the most recent GTA and what happened ? well the game booted but barely have i gone out of the first corner the whole background disappeared ... I went to my graphics settings and it says Generic PnP Monitor and Intel(R) HD Graphics
-Chip type Intel HD
-Dac type Internal
-Bios info : Intel Video BIOS
-Total Available graphics memory 1696 MB
-Dedicated Video Memory 64MB
-System Video memory 0MB
-shared system memory 1632MB
Is there any way to increase the Video memory on my laptop ?
I will add to it that in the Bios itself there are no options available for me to even lower it they are all kind of @locked@
I have been trying everything even updates from intel etc but not helping...
All you can do is max out your system memory, if it isn't maxed already. There might be an option in the laptops bios to increase the shared video memory
Alrighty I m running an MSI K N Neo I ve had it for a while help. coded memory slot Color so far I ve just been running a stick in Color coded memory slot help. the first green slot Someone got me two sticks of to fill out my system I installed them but only recognized g of ram I checked the manufacturer s site to find http www msicomputer com product p spec asp model k n neo platinum a nice diagram about dual and single channel memory that makes no sense to me I believe all the sticks are dual channel they have memory modules on both sides of the ram if that is how you tell I m not sure All three sticks are kingston value ram they are pc all three work as I discovered after some musical chairs with memory I m currently running the two new sticks recognizing g of memory while I have my original stick in a box Can anyone help me out with the diagram or point me in the direction of something more helpful The manufacturer s website has an online tech support page that is under construction I just downloaded the manual but I was hoping for some easy insight Anything would be greatly appreciated at this point Thanks nbsp
Did you scroll down to the "DIMM Module Combination" and "MSI Reminds You..." and read what is posted there?
How can I upgrade my laptop memory? There isn't a memory slot at the bottom of the laptop.
Memory slots on this notebook model are placed under the bottom cover so when RAM modules must be exchanged or upgraded bottom cover must be removed.
Please note: on some notebook models RAM upgrade is supported by notebook owners and RAM upgrade steps are described in user?s manuals document.
I your case such upgrade is not supported and RAM upgrade should be done by authorized service provider.
Generally speaking bottom cover removal is not complicated but you should not do it alone. This will cancel valid warranty.
In my opinion, before you do anything contact nearest Toshiba service provider in your country and ask for help. Simply pick up some info about price and compatible RAM modules.
1. Expansion SlotWhat is the expansion slot specification for this model as we would like to add a dedicated graphics card with DisplayPort ? 2. MemoryHow many memory slots does it have on the motherboard ?What type of memory is required ?What is the maximum memory supported on the motherboard ?
Go to Solution.
Ok, Sorry looking up the model at Kingston and a couple other sites didn't show your computer and seeing I hadn't seen any I was confused. Based on what I have found maybe a Model from other country. With that said it looks like it comes with 2gig DDR3L Ram and is Upgradable to 8Gig Also looks like yours comes With 1 PCI Express x16 Slot. I am not sure with the PSU and with that slot if you would be able to upgrade to a different Graphics Card. GPU and size of case would put a huge limit on what could be able to fit... Jameshttp://community.acer.com/t5/Aspire-Desktops/XC-704-Expansion-Slot-amp-Memory-Upgrade/td-p/392919
i have a N1996 motherboard with two slots for 184pin memory. i have purchased a new module to slot into the second slot but i just get a long beep then the beep stops, then a long beep again etc.
i have just tried the original one in the second slot(on its own) twice, but still the beep. i have put the memory back into the first slot and it works fine.
any help would be grateful
would i need to change the bios setting, or do you think that the second memory bank is down.
Can i upgrade my 4gb ram to 8gb? How many slot does hp 15 g005ax have?
Hi, It has: 1 customer-accessible/upgradable memory module slotSupports single-channel memoryDDR3L-1600-MHz Single Channel SupportDDR3L-1333-MHz Single Channel Support (DDR3-1600 downgrade to DDR3-1333)Supports up to 8 GB of system RAM in the following configurations:? 8192-MB total system memory (8192×1) or (4096×2)? 6144-MB total system memory (4096×1) + (2048×1)? 4096-MB total system memory (4096×1) or (2048×2)? 2048-MB total system memory (2048×1) Source: 3rd manual on the following link, page 2 http://support.hp.com/my-en/product/HP-15-Notebook-PC-series/6545564/model/7169754/manuals and the answers: (a) Yes (b) only one. Page 65 of the manual shows you part number and how to install RAM Regards.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/hp-15-g005ax-maximum-memory-and-slot/td-p/5818321
I'm working on a windows vista computer that would restart randomly and get a window exception bsod. I took out a memory module and ran memtest86 with memory in slot 1. Failed. Swapped it out with another memory stick but on the SAME slot on the motherboard. Failed.
Took that stick, put it in another slot on mobo. Passed. Took the other stick put in in that next slot, got the restarts again. Could it be that the memory slot that went bad on the mobo also caused the memory stick to go down with it?
Yes, that could be possible.
Hi I have Inspirion laptop currently And it has got rt wireless card which has got very bad reputation The card does not work on Ubuntu based OS even if the laptop was ubuntu approved I also have another and Swap Card Wifi N5010 Inspiron Inspiron 3537 laptop Inspirion N which has damaged motherboard but its wifi was working pefectly when last Swap Wifi Card Inspiron N5010 and Inspiron 3537 time I used it on both windows and Ubuntu OS So here is my question Can I swap internal wifi card from above two laptops to make wifi working again in Inspirion laptop nbsp Current laptop is use Inspirion Old laptop with damaged motherboard Inspirion N N was damaged years ago My current laptop is not under warrenty Will the Wifi card of old laptop fit into new one and will it work on new laptop nbsp Here is system information of new laptop if needed OS Name Microsoft Windows ProVersion Build Other OS Description Not AvailableOS Manufacturer Microsoft CorporationSystem Name xxxxxxSystem Manufacturer Dell Inc System Model Inspiron System Type x -based PCSystem SKU Inspiron Processor Intel R Core TM i - U CPU GHz Mhz Core s Logical Processor s BIOS Version Date Dell Inc A SMBIOS Version Embedded Controller Version BIOS Mode LegacyBaseBoard Manufacturer Dell Inc BaseBoard Model Not AvailableBaseBoard Name Base BoardPlatform Role MobileSecure Boot State UnsupportedPCR Configuration Binding Not PossibleWindows Directory C WindowsSystem Directory C Windows system Boot Device Device HarddiskVolume Locale United StatesHardware Abstraction Layer Version quot quot User Name xxxxxx xxxxxxTime Zone India Standard TimeInstalled Physical Memory RAM GBTotal Physical Memory GBAvailable Physical Memory GBTotal Virtual Memory GBAvailable Virtual Memory GBPage File Space GBPage File C pagefile sysHyper-V - VM Monitor Mode Extensions YesHyper-V - Second Level Address Translation Extensions YesHyper-V - Virtualization Enabled in Firmware YesHyper-V - Data Execution Protection Yes Here is WiFi card information of current laptop nbsp Name Ralink RT bgn Wi-Fi AdapterAdapter Type Ethernet Product Type Ralink RT bgn Wi-Fi AdapterInstalled YesPNP Device ID PCI VEN amp DEV amp SUBSYS EC C amp REV D CD B Last Reset PMIndex Service Name netr xIP Address fe d a ad d IP Subnet Default IP Gateway DHCP Enabled YesDHCP Server DHCP Lease Expires AMDHCP Lease Obtained AMMAC Address B D C D Memory Address xC - xC FFFFIRQ Channel IRQ Driver c windows system drivers netr x sys MB bytes PMhttp://en.community.dell.com/support-forums/laptop/f/3518/t/19976661
Recently this has been happening: http://i.imgur.com/1Mc7v1B.png
So I ran a search and found this: http://www.bleepingcomputer.com/forums/t/494636/service-host-local-system-cpumemory-hog/
Is this still the best way to go about fixing it? If so, would anyone mind looking at the results for me?
I'm on Windows 8.
I have an intel i72700k and 16 gigs of RAM.
Bonus problem: My CPU is going up to the high 50% range usage and I'm not running anything big or much of anything period, going into task manager reveals that a large majority of the CPU is being used by nothing.
Welcome aboard Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click mbam-setup-220.127.116.110.exe and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to the following:
Launch Malwarebytes Anti-MalwareA 14 day trial of the Premium features is pre-selected. You may deselect this if you wish, and it will not diminish the scanning and removal capabilities of the program.
Click Finish.On the Dashboard, click the 'Update Now >>' linkAfter the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.If an update is available, click the Update Now button.
A Threat Scan will begin.When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.In most cases, a restart will be required.Wait for the prompt to restart the computer to appear, then click on Yes.If you already have MBAM 2.0 installed:On the Dashboard, click the 'Update Now >>' linkAfter the update completes, click the 'Scan Now >>' button.
Or, on the Dashboard, click the Scan Now >> button.If an update is available, click the Update Now button.
A Threat Scan will begin.When the scan is complete, if there have been detections, click Apply Actions to allow MBAM to clean what was detected.In most cases, a restart will be required.Wait for the prompt to restart the computer to appear, then click on Yes.How to get logs:(Export log to save as txt)After the restart once you are back at your desktop, open MBAM once more.Click on the History tab > Application Logs.Double click on the Scan Log which shows the Date and time of the scan just performed.Click 'Export'.Click 'Text file (*.txt)'In the Save File dialog box which appears, click on Desktop.In the File name: box type a name for your scan log.A message box named 'File Saved' should appear stating "Your file has been successfully exported".Click OkAttach that saved log to your next reply.(Copy to clipboard for pasting into forum replies or tickets)After the restart once you are back at your desktop, open MBAM once more.Click on the History tab > Application Logs.Double click on the scan log which shows the Date and time of the scan just performed.Click 'Copy to Clipboard'Paste the contents of the clipboard into your reply.Download Malwarebytes Anti-Rootkit from HERE to your Desktop.Unzip downloaded file.Open the folder where the contents were unzipped and run mbar.exeFollow the instructions in the wizard to update and allow the program to scan your computer for threats.DO NOT click on the Cleanup button. Simply exit the program.When done, please po... Read more
It also slows down my computer it appears - The driver that was installed automatically says 2006 IC USB Storage-CFC USB Device
this is the hardware ID
under USB MASS STORAGE DEVICE
And under one of the Tabs:
Any help would be appreciated ! Thanks all
my windows might be FAKE
*** is this
is there any way out of it ?
how can i install service pack 2
Contact Microsoft and get them to check the authenticity of your XP installation. If it is fake then you need to let MS know and tell them where you got it from - they may then provide you with a legit key.http://www.techsupportforum.com/forums/f10/service-pack-2-doesnt-allow-me-to-install-saying-316076.html
So I'm getting 4 beeps from my N5010.
I remove both RAM sticks & I get 2 beeps (no RAM detected) so I think my motherboard is good.
I've done every combination of RAM sticks in the slots to try to isolate a bad one, & I'm still getting 4 beeps no matter what.
4 beeps are bad memory and 2 beeps are no memory as you are already aware.
Now, have you tried each memory module in each slot and it fails with 4 beeps on every case? If yes, then I would suspect the motherboard to be faulty. The chances of 2 memory modules going faulty at the same time is very rare. You could however, test this memory module on another machine to confirm if it is functional or not.
If there is no warranty, then you could contact our team to get a quote for a paid service call - http://dell.to/1vnT6CQ
Write me a private conversation with the service tag and your contact details(Name and Email) for case records.
Let us know if you have any other queries.
Hi, can anyone tell me how to access the second slot in my e-system 1511. I was told it was under the keyboard. I can unclip the clips but there seems to be something else holiding it down. I ve looked at the back and can see no screw with kb next to it to indicate that, that is the screw for the keypad.
Appreciate any advice. I have upgraded the first memory. I ordered 2gb and this came in two of 1gb so I am assuming there is a second slot.
When I populate slot2 with 512mb noname ddr1 I cannot boot into windows, BIOS comes up ok and memory tests ok. This is intermittent but now almost 90% of the time it won't boot. slot1 contains a 1GB kingston pc3200.
With no ddr in slot2 it boots ok and with a 1GB stick (corsair) it boots ok. I guess it was the noname 512MB stick but seems strange it passed all the memory tests (from ubuntu grub loader)
MB is an Asus K8S-MX
hi what happens when you put the 512MB stick in slot 1 and the 1gb stick in slot 2? kinda surprised your running win7 64bit on just 1.5 gb of ram.http://www.sevenforums.com/hardware-devices/361167-wont-boot-into-windows-2nd-memory-slot-filled.html
Hi all I am having a strange problem with my PC I have a year old motherboard Leadtek Winfast K nCR D Pro and a new Athlon XP and new x GB corsair value memory - PC slot issue weird Resets sticks My PC is randomly resetting itself even sitting at the bios screen just as though the reset button had been pressed I disconnected all the drives and it still happens I have installed a new PSU and it still happens This is the bit that confuses me I PC Resets - weird memory slot issue have three dimm slots one black two blue for dual channel If I put either of the chips only in the black slot I get NO problems at all If I put either of the chips only in either of the blue slots it randomly resets this happens whether I have a single chip in one of the blue slots or both chips in both blue slots Obviously when there is only one chip in one blue slot the bios does not show dual channel enabled Is there any difference in the way a motherboard deals with the memory in the blue slots which could indicate a problem with the memory or is it likely the motherboard is dying Thanks for your help nbsp
Assuming the RAM is correct for your PC go into BIOS and set DRAM or RAM or whatever your RAM is listed under to Auto, reboot and see if that helps. ALso, make sure that you have the RAM in the correct slots for DDR (probably the two blue as you stated).
Hi nbsp I recently bought a notebook from HP the HP G with A - processor Inside there was a GB DDR L- Kingston memory module slot with HP u... speed G2 - 355 only Memory on 1600MHz K7H44ES shipped and there are two slots available nbsp I checked with CPU-Z and other tools and it showed a DRAM Frequency of MHz nbsp I added a GB DDR HP 355 G2 K7H44ES - Memory speed 1600MHz only with on slot u... L- Cruical memory module to the second slot and checked again with CPU-Z The DRAM Frequency was just MHz the memory size of GB was recognized correctly nbsp I thought it must be because of two different modules got for testing two other identical GB DDR L- Kingston memory modules and DRAM Frequency was again just MHz nbsp And if only one slot is used with any DDR L- I had available DRAM Frequency was MHz But whenever both slots are used it dropped to MHz nbsp What's wrong Do I need some specific memory modules for this notebook respectively CPU and memory controller nbsp HP Support suggested just that but I believe it's not because of this Perhaps the memory controller is working that way that it drops down to MHz if both slots are used But why should that be With none of my previous notebooks or pc this happened always the memory speed as specified nbsp And Google says that A - has a single-channel memory contoller for DDR L- which would be even faster but instead it runs with nbsp I currently use Windows Pro -bit if this of matter nbsp Cheershttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-355-G2-K7H44ES-Memory-speed-1600MHz-only-with-on-slot/td-p/5801100
I am using a HP Z400 Workstation Xeon Quad-Core W3565 3.2GHz, 12GB (3x4GB), 1TB, DVDRW, Windows 7 Pro.This the the model with 6 memory slots, so there was a possiblity for 24GB of RAM. When I populate the remaining slots 4, 5 & 6 with 4GB DIMM, I get errors on boot up for the newly populated slots. I am unable to configure for 24GB.I did discovered that the DDR3's that I am using are non-ECC. The system has been running fine with the (3x4GB) setup. Is the non-ECC preventing the 24GB configuration from working?Thanks for any help you can offer.
Yes it is. It is not possible to install standard PC and server memory, I've never seen a system of any brand which supports such a configuration. Officially, the Z400 supports only ECC unbuffered memory modules.However, it will also run with standard DDR3 RAMs, unsupported only means that HP Customer Service won't help you.There are some reports that even 8 GB Modules work, but that's another story, 24 GB runs fine. Mixing different types of memory is generally a bad idea.Use either ECC unbuffered (which is recommended) or non-ECC, preferably six identical modules.DDR3 are relatively cheap, even those with error checking and correction. Good luckhttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z400-6-slot-memory-configut-ration/td-p/5571112
I just recently purchased a 1gb stick of Kingston ddr400 Ram for my pc.
Currently i have 2 x 512mb sticks in my 1st and 3rd slot of my MB. I currently use the Asus A7N8X-D Board. 3 Memory slots total. What would you suggest me to do for the order of my memory or does it even matter ?
Slot 1 : 512mb
Slot 2 : Empty
Slot 3 : 512mb
Eventually going to be 3gb Memory but Im not the best in these types of configurations.
Thanks ahead of time guys.
I m sorry this is so long but please take the time to read it all because I have already taken a LOT of steps to solve this myself I am an IT Professional and have been Memory locks Stick up unless in is Vaio slot since the s The computer I m having the problem with is mine it has always had up-to-date AV and has Automatic Updates on I check it every so often with SpyBotS amp d or MalwareBytes and it has NEVER had anything besides tracking cookies It has been on a secured wireless network out in the middle of nowhere doubt anyone would hack it with both a hardware firewall at the DSL entry point and Windows Firewall on It has never had a Memory Stick in its slot before now The only removable media I ve ever used with it is a big USB disk for backups which unfortunately has not been done Vaio locks up unless Memory Stick is in slot in about months Vaio locks up unless Memory Stick is in slot I ve never had Limewire or any other risky stuff installed on this computer I don t use FaceBook or any of the social networking I don t surf any type of risky sites Vaio locks up unless Memory Stick is in slot and I don t download anything onto this computer Its the safest computer on the planet The computer is a Sony Vaio K-series laptop probably - years old running XP Home SP and IE Here s the sequence of events as best I recall them - everything is fine I m looking up something boring like outboard motor parts Its supposed to storm tomorrow so I am going to unplug it Automatic Updates are downloaded and ready to install so I choose quot Install Updates and Shutdown quot It does its thing in a normal amount of time no indication of problems and shuts down I unplug the charger and put it away - I get the computer out plug it up push the power button It gets to the WinXP logo with the progress bar underneath The bar rotates around a couple times then sticks I wait probably minutes and nothing ever happens I notice the orange light is on beside the quot Memory Stick quot slot I boot it up in Safe Mode That works I check the logs for the Windows Updates everything appears to have went fine Check Event Viewer for some clue as to what happened nothing Check Device Manager no splats Everything looks fine Hmmm maybe a fluke try a normal reboot again Exact same result hangs at same place with orange light on beside quot Memory Stick quot slot So I boot into Safe Mode and uninstall all of the Windows Updates that have the date on them I made sure I did them in the correct order so all dependencies were resolved Tried another normal boot Nope hangs at same place with orange light on beside quot Memory Stick quot slot OK now I m scared So I go to my other PC the desktop and do some Googling of the symptoms I find one in particular a malware-infested Sony VAIO locking up with Memory Stick light on So its probably malware Since I already have the latest version of Norton AV I run a full scan on the Vaio with that Comes up clean Then MalwareBytes latest version comes up clean Then I reboot into Safe mode with Networking Then run Housecall online with Trend Micro comes up clean Just for S s amp G s I even try their New Beta scan clean Then Kaspersky s online scanner also comes up clean Then BitDefender again clean Then as a last resort I disable NOrton s real-time protection and run Combofix Combofix did not find anything I looked through its logs but have to admit I m not that good at fixing something manually I don t know how to interpret Hijack This logs I always give up before then and reformat But I have a bunch of old software that I don t know the registration keys for so I do not want to reformat At this point I kinda panicked and tried Restoring Windows to a Restore Point on That hosed my IE Windows was unable to restore back to the Restore Point that Combofix had just created - So I dinked around with it reinstalling IE and Java Finally got that working again I had read in the post about the malware-laden Vaio that his booted normally if he pu... Read more
I am happy to report that I have solved the identical problem you describe involving system hang on the Windows XP splash screen and the yellow memory stick light turning on at that point. Similar to your experience I could boot in safe mode but no way to get into a normal boot. As this was a client machine on a limited budget I could not waste a lot of time and contacted the client and got authorization to do a full system restore figuring it would eliminate any software issues (conclusion based on ability to boot in safe mode it seemed reasonable?). Much to my surprise after a full factory restore from the OEM restore DVD the symptom was still there, in fact the restore could not complete because it required a full normal boot to finish the restore. So now I was really perplexed, no way it was software (given that the drive had been fully erased and reformatted), so that only leaves hardware and the memory stick module seemed the likely culprit and on a hunch I tore the bloody thing apart (keyboard, rear hinge cover, and all screws from bottom of the case) which allowed be just enough clearance to get inside and remove the ribbon cable from the memory stick module and presto the problem is resolved and unit now boots normally and I am in the process of bringing the system back up to current standards with all the updates, etc, and have already done multiple reboots with no problems. So I suspect you will find similar results once you go through the difficult task of tearing it apart as our symptoms were identical.
Trust me it has nothing to do with virus or malware activity, it is an actual hardware failure!!
sorry i like to seek your adivce on the following matter
i am using asus P7H55-M motherboard..i was actually using kingston 2x 2GB 1333MHz ram..recently i added 1 nex kingston 1x4GB 1333MHz ram..it was working fine until today when the com could not boot up..when i check, i found burnt mark on the 4GB ram and the memory slot..
my question are:
1) could i replace my motherboard if it is still under warrenty
2) could the burnt mark cause by the mismatching of the ram..
1) could i replace my motherboard if it is still under warrentyClick to expand...
I guess so, have you ever tried to establish the communication with the motherboard maker yet? Many of them has it own support lines that can provides the RMA informations.
2) could the burnt mark cause by the mismatching of the ram..Click to expand...
How? Did you actually force it to be seated in backward position? Look closely at the notch of RAM, they can only go one way, and you can feel the pressure of installing the ram if it goes in wrong way.
what VGA coolers do you reccomend? (that do not attatch to the card)
My Gainward 6800Gt 2400\2ns, is a nice card and has quite chunky cooling, it does run quite hot and would like to cool it down for o/c purposes.
Incase you havnt seen the Gainward cards they are coverd in a chassis with 2 60mm fans which makes putting any other cooling on it hard, (however one side is exposed apart from the baseplate).
I was wondering if anyone new of anything to aid my graphics card.
P.S= here are some pics
That looks like it should cool the card really well. I have a VGA Silencer on mine. It replaces the stock HSF.
As stated above I have a Dell Inspiron I tried to power up last night and it froze that Dell Boot 1501 Inspiron Flashes Doesnt Caps Lock the BIOS loading screen I left it alone to see if anything would happen minutes later i held down the power button and it Caps Lock Flashes Dell Inspiron 1501 Doesnt Boot didn t shut down like it s supposed to i held it down for more than - seconds I tried to start it up I heard the fan start up as it usually does but nothing comes up on the Display and the Caps Lock LED flashes continuously I began searching online for possible problems did some troubleshooting because i refuse to call Dell Always get problems and came up with it being a possible RAM problem I unscrewed the back and removed both sticks and tried starting up with each stick in a different slot then with just one stick on each slot no luck Then i tried to see if i could get the two LEDs to show up for the POST by removing both sticks and now the caps lock doesnt even flash nor does anything come up on the screen Please Help nbsp
Did it give you any beeps when both sticks of memory where out following your turning it on?
If it doesn't beep while having no memory then it is likely that your motherboard needs to be replaced.
THE ISSUE Hardware issue A broken memory stick slot on the HP Pavilion n DETAILED EXPLANATION I don t know how this happened anyway but the catch on the second slot tray is broken causing one side of the installed memory stick to hang loose and not snap in or fit securely resulting in Windows not registering or recognizing that there is in fact a RAM memory stick actually in the second slot CONSEQUENCE I now have only one good RAM memory slot ACTIONS TAKEN SO FAR Purchased and installed nd RAM memory stick in the problem slot PRODUCT SPECS Memory Type DDR PC slot Pavilion broken A stick the on 753n HP memory DDR PC DDR non-ECC RESULTS Problem still exists Crucial s online scanner and the System Specs under My Computer still reads like below Memory DDR PC DDR PC Memory Type DDR PC DDR PC DDR non-ECC Maximum Memory GB Currently Installed Memory MB Total Memory Slots Available Memory Slots MB EMPTY SUGGESTED ACIONS FROM TECH SITES A Replace the mother board OR B Replace the MB stick that s in the good slot with A broken memory stick slot on the HP Pavilion 753n a GB stick THE PROBLEM A broken memory stick slot on the HP Pavilion 753n WITH B According to Crucial s com s Expert Online Tech where I bought the extra RAM this pc HP Pavilion n is too old and cannot handle a GB stick because it s basically an obsolete pc the OS operating system will be severely affected causing crashes and other instabiity if you put a GB stick of RAM in a slot therefore it is not recommended to put a GB stick in a slot MY QUESTIONS Is he right I ve received both yes and no responses so far but no definitive answer What other solutions are there What s involved in remanufacturing or replacing the board Should I contact HP to get a price quote to fix the issue THANK YOU All suggestions reviewed nbsp
is the system memory slot basically provided for au003tx is samsung 's 2133 mhz or not? i actually brought this laptop one month ago and am shocked to see the specification tht the memory slot belongs to samsung i can't get to know about that i tried very hardly till now please answer me so that i can do something if i'd been cheatedplease do reply
@sree_parimi? The slot may have a Samsung memory stick in it but you could install any name brand in it. DDR4-2133 Dual Channel Support (DDR4-2400 bridge to DDR4?2133) Your manual here. http://h10032.www1.hp.com/ctg/Manual/c05228250 REOhttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/is-the-system-memory-slot-basically-provided-for-au003tx-is/td-p/5743677
I purchased what was described as a 'Dell 3588D Motherboard Slot 1 Dimension
XPS-B' motherboard from eBay. It uses Rambus memory sticks, but has 3
memory slots to fill, while every motherboard of that type I have researched only
has 2 memory slots. In addition, most of the Series B desktops I looked into
seem to be limited to 512MB of memory.
Because my motherboard has 3 memory slots, would I be allowed to insert three 256MB memory sticks, giving me a total memory of 768MB? I'm told that you should
not exceed the required limit of memory. Would someone care to comment on my
Just try it, it'll either work or it won't work.
i installed win7 days ago but the service of WWAN doesnt work. The computer says: Error2: the system cannot find the file specified... i need to start this service to connect with the data card, please some help!
Question do you have the solution of this problem? Because I have the similar problem and no solution.http://www.sevenforums.com/network-sharing/76328-service-wwan-auto-config-doesnt-start.html