Windows Support Forum

Not booting-already tried hard reset and going to BIOS (Wind...

Q: Not booting-already tried hard reset and going to BIOS (Wind...

Problem: When I press "ON" I hear a jolt vibration, and an orange LED light turns on, the screen stays black. Nothing after that. Stays black for two minutes; then the screen lights in "night blue" on the background. (Please see picture at bottom) I HAVE TRIED: hard reset, tried going into the BIOS (by holding windows+B). No luck. Please help with steps to fix. Will appreciate it. Thank you.

Relevancy 100%
Preferred Solution: Not booting-already tried hard reset and going to BIOS (Wind...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: Not booting-already tried hard reset and going to BIOS (Wind...

Please try the structural troubleshooting from the following weblink which might resolve the issue:
Relevancy 20.64%

Please refer to the message below for information on how to remove your Dell laptop BIOS password. The information also applies to other manufacturers and summarizes a wealth of data collected from previous threads and thousand of posts related to this problem.

We no longer support any further discussion on this topic as we believe all the free help that could be given is already out there (the post below sums it up pretty well). You can always go back to your system manufacturer for support, as well as google for the dozens of third party paid support providers that are available online.

Summary of laptop password help thread:

A:Dell BIOS password removal. Read this first BEFORE posting.

Mobile Password Help

The following support information and downloads, are provided to help members freely remove their laptop password
If all options have been tried and you still require help removing your password, search Google for 3rd party alternatives
TechSpot forums and all support is provided freely at all times, it is against our guidelines to link to external paid services
You are advised to try any or all options, with your first point of contact being the laptop manufacture, being the best option

TechSpot forums are FREE and manufacture support only

Click >Dell Support and System Information for a particular Service Tag

> Click > HP Live Chat, Drivers, Warranty and Support Information thread

> Click > Toshiba BIOS Setup / BIOS settings -- access instructions
Reset password on Satellite A205:
Reset password on Satellite A100 / A105:

Password types :

Power On Password (pop). this password can be reset by unplugging the cmos battery for a while, and plugging it back in.

Supervisor/bios Password (svp). this requires reading the eeprom chip (8 leg or 14 leg) with an electronic device by using another pc's serial port or by paperclip method if model type available.

Hard Drive Password (hdp). this is usually tied to svp, but not all the time. it requires special software and a library of known manufacturer's password. but can be cracked either recovering the data or wiping the data.
Transfer of Product Ownership
International warranty contact phone numbers

Old closed threads, with lots of info:
Dell BIOS password removal (Jun 07 - Sep 07) (543 replies)
HP / Dell / etc. Laptop password help thread (Jan-Mar 2008) (533 replies)
HP / Dell / etc. Laptop password help (April - July 2008) (937 replies)
HP / Dell / etc. laptop password help thread (Aug 08 - Apr 2009) (2200+ replies)


Dell Manuals :

DSTCD.iso : (Release date: 22-November-2005)

"Paperclip Procedure"
HTML Document:
PDF Document:

laptops unlocked:
Chip 24C02 24C04:
Dell IC Numbers:

SvcTag.exe : :
Command line Uses => asset /? (eg Asset /o for owner tag)
CmosPwd :

HP OldPass .zip includes:

[*] unlock6.exe (made in 1997)
[*] BIOS_PW.EXE (made in 2003)
[*] HDD_PW.EXE (made in 2003)

HP Oldpass2 .zip:
As above, made as a copy, using another Zip program

Dell Latitude .zip:
D35B password generator (old generator)

Dell MasterPW .zip:
D35B password generator (old generator)
How to use
Relevancy 17.2%

I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).

Thank you

A:Do you need more than Windows default tools to check/repair a hard drive?

IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
Relevancy 21.5%

I am working on a Toshiba Satellite with Insyde H2O bios. It says to use F2 for setup and F12 for boot manager.

I've tried all the function keys, as well as esc and del and they only get me to Windows Boot Manager. (This includes F2.)

The machine has Vista that stops loading when it gets to the network drivers. Could a corrupt BIOS be the cause? If I download a new BIOS can I install it from the command prompt?

If the BIOS is still OK are there other ways to get into setup?

(Meanwhile F2 works just fine on my Dell Lattitude)

A:Can't get into BIOS setup utility

Try using a USB keyboard...

"Could a corrupt BIOS be the cause?"

I don't think you would get that far in the boot process if the bios were corrupt
Relevancy 16.77%

I've said time and time again that solid state drives are the future but the truth of the matter is, traditional spinning disks still have a place inside a modern PC as a storage / backup drive. The question then becomes,...

Read more

A:Latest hard drive reliability data reveals it may be best to avoid 3TB drives

Well I'm glad I have never bought a Seagate HD. I usually buy Western Digital, except my SSD is Samsung.
Relevancy 26.23%

I have an old Toshiba laptop and it is unusable and I was wondering if there was a way to factory reset it without a disk.

Model # - psk2cu-s5150

A:Reset My Laptop

I believe there's a partition that contains the OEM setup, but you need a CD (any) and to recover from the Restore partition
Relevancy 15.48%

Hello I have a Dell Inspiron laptop I have an image of the entire hard drive that I created when I first got the computer using Acronis TrueImage and I d like to restore that image returning the laptop back to that fresh clean original state I ve done this two or three times before and it worked great each time But now there s a problem Normally I would in boots as when drive external but laptop hard Primary recognized isn't drive used connect to the laptop a USB storage backup drive that has the disk image boot the laptop from a Rescue Media CD created by Acronis then restore that disk image from the back-up drive onto the laptop s HDD When I tried it this time round the laptop s HDD was not listed in TrueImage at all I created a new rescue media disk tried it again and got the same result I then took the HDD out of the laptop connected it to Primary hard drive boots in laptop but isn't recognized when used as external drive an adapter kit that let s you power up and plug in the drive via a USB port and external power supply and tried the same procedure using my desktop to run the operation Same result The drive was not detected by Acronis The drive does not seem to spin up at all Primary hard drive boots in laptop but isn't recognized when used as external drive when it is connected Keep in mind the drive still works when installed in the laptop -- it boots into Windows XP etc When I plug the drive into my desktop the drive does not show up in Disk Management Start Right-click My Computer Manage Disk Management It doesn t show up in either of the two right-side windows so there s no way I know of to format it or do any work on it in Windows When I go to Device Manager Disk Drives I see quot USB Device quot for that drive and under Properties it is listed as quot Disk Drives quot for quot Device Type quot and its status says it is working properly So what I don t get is it works fine when it is in the laptop boots into XP etc but when connected as an external drive or when the laptop is being run off of CD the drive can t be detected and not on just one computer but multiple Is it junk Any ideas nbsp

A:Primary hard drive boots in laptop but isn't recognized when used as external drive

It's a power issue. Had the same issue taking a 2.5" laptop hdd and attempting to hook up w/ a passive usb sata hdd cable. my recommendation is to use a powered usb sata cable. like this one: having proper power will allow the USB bus to detect and power the hdd correctly. Hope this helps, take care!
Relevancy 21.07%

Okay so my computer is manly for playing games but I ve been having a problem for quite some time that I & self it Bios GPU Usage Drops Changing & CPU can t seem to be able to fix During gameplay at some points totally randomly I start to have huge freezes both CPU and GPU usage drop insanely and following same do the fans this usually GPU & CPU Usage Drops & Bios Changing it self happens for or minutes sometimes even longer a simple relog from the game fixes it This also happens if let s say I go AFK from my game about minutes or so when I come back it s freezing ALOT I looked further into trying to fix this problem I tried almost everything until I had the idea to check my bios since I had previously overclocked my CPU not overclocked atm and surprise for me when I did a bios reset for default settings this is what I saw http postimg org image eoejxdyv That is changed by itself every boot And that is what is causing my GPU and CPU usage drops I have no idea why that is changing by itself at first I though it was AI Suite software from Asus that I had used before to overclock my CPU but even with that uninstalled it is happening I also thought about reinstalling my windows but I would rather wait GPU & CPU Usage Drops & Bios Changing it self for Windows to go public My Specs - Windows Pro - Bit - Evga Supernova Nex G Gold - Asus Z -Pro Socket - Intel Core i k ghz Ghz Turbo - Corsair Hydro H - Gigabyte Windforce R X GB GDDR - GB G Skill Ripjaw-X Mhz DDR Dual PS All drivers and software are always updated nbsp

A:GPU & CPU Usage Drops & Bios Changing it self

Have you tried changing the cmos battery? The bios will not hold settings if the battery is bad.
Relevancy 17.63%

Today, my external hard drive has not appeared on my PC. It did work before I went to sleep yet when I began my PC in the next morning, it didn't show. Can you please help me how to fix this?

A:External hard drive not showing up on my PC

Hello there,

There are a lot of different reasons for an HDD to stop showing. A few things you can try are:

Try using a different USB cable, make sure it is as short as the original one, or even shorter. This is important it terms of providing enough power for the drive to function properly.

Try connecting it to different USB ports.

Try connecting it to a different PC.

Sometimes the drive can misbehave due to insufficient power even if it appears to be spinning make sure you connect the HDD directly to the USB port and not through a USB hub.

Check if you can see the HDD in Windows Device Manager and in Disk Management. Good luck.
Relevancy 17.63%

Dear frnds,

I have been using my external hard disk(WD My Passport Essential SE) 1 Tb, since last 6 months, but after a recent virus scan, my laptop is not showing the external hard disk, i have tried using My computer, Manage and Disk management.

I am unable to find external hard disk even in Disk management i.e. it is not showing.
So please can anyone help me in this concern......
I would really appreciate and thanks in advance

A:Problem with my external WD 1TB My Passport hard disk

First, try accessing it from another computer to be sure it can be accessed elsewhere. The Western Digital Passport Essential has had a pretty high failure rate as seen in our shop... so the unavailable external hard disk may not have anything to do with the virus scan may have nothing to do with the problem.

In other cases, I would attempt to reinstall the Passport drive. You do not usually cause any damage to the data on the drive when you do this.
Relevancy 17.2%


Thanks for any help in advance..

I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..

I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.


A:External USB hard drive not recognised on Windows after plugging it into a Mac

Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.

Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)​
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
Relevancy 17.63%

Hi I have a few questions about my external hard drive. I play games and I noticed that my internal hard drive was getting full so I bought a new external hard drive. I was wondering if I backed up my internal hard drive to my external one and then formatted my internal hard drive, would I have to re install everything or would I be able to access my games and such. Thanks for your time its much appreciated.

A:External Hard Drive

You would have to e-install all of your games, and applications, and windows updates
Relevancy 21.07%


as the topic states I think of making a move from my old t1100 to FX8350.
Tricky part is that I need to flash my BIOS to make the old AM3 plank support AM3+.

MB, m4atd89gt. And current BIOS is the stock BIOS 1006. The BIOS that I'm updating to is a 3029.
Has someone of you fellow techspotters tried this already? Were the results satisfying, or just infinite amount of crashing? Which I'm just a little afraid of when making the change.

Any advice for such activity?
And yes, I know they are AMD proceccors

Relevancy 16.77%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.
Relevancy 17.2%

Guys I need all the expert help I can get I ve got a Western Digital quot My Book quot i think it was called that that has had every picture that me and my girlfriend have ever corrupt drive hard photos All on newborn external taken including when we first met holidays pets and most importantly pictures of All newborn photos corrupt on external hard drive my girlfriends pregnancy and s of photo s of our month old son that have all gone missing and even some other photo s that still show the thumbnail image don t open because I get an error saying that photo s are corrupt or damaged my girlfriend is already going mad and I don t know what software to get them back At present i ve tried opening with different picture veiwers like photoshop no luck I ve tried EASEUS Photo recovery software but then cancelled because I read that Recova could do a better job turns out recova doesn t work on external drives NOW NOTHING WILL OPEN ON THE EXTERNAL HDD I need some expert advise on what program WORKS to try and recovery these files A S A P because otherwise we will be devistated I don t wanna buy loads diferent software only to find that i m doing more damage nbsp

A:All newborn photos corrupt on external hard drive

try pc inspector file recovery.

ALWAYS back up photos to more than one device.
Relevancy 25.37%

Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.

I need help as fast as possible

Thank you
Relevancy 17.2%

Hello I need urgent help with resolving this as I am trying to get the harddrive showing up or at least recover files by Hard Portable Drive External Slim detected Seagate PC not I was using it at school first and my computer froze so I shut down the Seagate Portable External Hard Drive Slim not detected by PC computer and restarted without safely removing Seagate Portable External Hard Drive Slim not detected by PC the hard drive at first the PC wouldnt reboot because I had it still plugged in after unplugging it and the PC loaded up it did not recognize the hard drive anymore I have tried it on several PCs including the one at home all using Windows and none of them recognize it I tried all USB ports on my PC and none of them work the light on the hard drive is ON so I know there is no connectivity issue I tried several free trial softwares even the ones by Seagate and none of them recognized the drive so I cannot use their tools for recovering files or detecting the hard drive When I check the Disk Management it does not show there When I check the Device Manager it does not show under USB controllers but it DOES show under Disk Drives I also checked and the drive is up to date The Model is BUP Slim BK In my quick launch the drive is recognized there and gives me the option to Eject it but it doesn t actually Eject it when I click on it it either stop responding or does nothing unless I manually unplug it EDIT After a really long time the Eject message says the device is already in use which is probably why it doesnt Safely eject nbsp

A:Seagate Portable External Hard Drive Slim not detected by PC

I am also having the same problem, as I need to get some stuff off my hard drive but it does not show up on any of it, was just wondering if you had found a way to fix this yet?
Kind Regards
Relevancy 20.21%

I have just added a new SSD drive does recognize 1720 Inspiron in modular boot bay not BIOS sequence HDD in the modular bay of my Inspiron The SSD drive in modular bay is accessible if I boot using my normal harddrive or USB DVD-ROM drive for OS installation which I managed to install on the SSD drive Once boot using my regular HDD I can see the drive is set to Disk in Windows Disk Management And my other HDDs Inspiron 1720 BIOS does not recognize modular bay HDD in boot sequence as Disk and Disk I can boot thru HDD or HDD by selecting them in boot sequence However the SSD drive is not available as part of the boot sequence in the BIOS setup or F boot sequence The BIOS though recognize that there is an SSD drive attached Inspiron 1720 BIOS does not recognize modular bay HDD in boot sequence in modular drive bay My Inspiron is using the latest A BIOS and I could not find a way to include the SSD as part of the boot sequence The boot sequence works when I put back the DVD-ROM drive which boots without any problem with any bootable CD DVD Is there any way I can make the modular bay SSD bootable other than of course putting the SSD in the HDD or HDD caddy which some thing I do not wish to do Please help nbsp
Relevancy 17.2%

Look no further than a solid state drive for breakneck speed. If a large-capacity drive for storage is what you're after, however, traditional spinning hard drives are still the best bet in terms of price per GB. And if you...

Read more

A:Western Digital 'Green' hard drives now available in capacities up to 6TB

On a more interesting note, Seagate is already shipping 8TB HDD-s to its select customers, with 10TB ones to follow.

Besides, nothing beats the current 6TB Enterprise offer from Seagate anyway, in terms of price+performance+capacity. Let Western Digital lag behind as it does
Relevancy 17.2%


Yesterday, I was working with my PC while my 1TB Seagate external hard ( was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:

After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.

I searched and read lots of threads and tested some other stuff:

(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
Relevancy 17.2%

When booting up my computer, directly after auto-detecting SATA devices, my computer regularly gives me an error that alternately reads "Primary Hard Disk Failure, Press F1 to Resume..." or "Secondary Hard Disk Failure, Press F1 to Resume..." Sometimes the word "Slave" or "Master" are there after the words "Primary" or "Secondary" in there as well. While the content of the message varies, the result is usually the same: The startup process lags after auto-detecting the drives, then gives me this error.

I have three SATA hard drives and a DVD drive plugged in to my mb via SATA. When no HDD are detached, but I have boot media in the DVD drive, the computer starts up quickly and normally, with no errors. When any or all of the HDDs are plugged in, I receive the above error. I borrowed a HDD from my roommate, plugged it in, attempted to boot up and still received the error. None of the HDD are bad, and it would be a pretty big coincidence for all four I've tested to fail at once.

What could the problem be?

A:Primary Hard Disk Failure, Press F1 to Resume


When I plug in just one or two of the HDD + the DVD drive, the computer boots fine. When I plug in three HDD + DVD drive, failure! Do I perhaps need to upgrade my power supply?
Relevancy 17.2%

Hey guys weird problem here The TB internal drive in my PC started slowly dying in December and my brother got me an SSD additional and connecting when laggy hard drives PC sluggish for Christmas I installed it and it works amazing flawlessly and I love it When I attempted to make my old dying drive a secondary hard drive Windows PC laggy and sluggish when connecting additional hard drives recognized it fine despite the SATA connection broken off and I was able to salvage what I wanted from it The speed of the transfer was blazing and I was pretty happy but I noticed Windows getting insanely laggy and sluggish The mouse would stop moving every few inches and the keyboard would stop responding Instead of normal lag such as me typing this sentence nothing happening and then it appearing in full a few seconds later when the lag would catch up it would be a jumble of letters For example if I typed quot wow my computer is going slow right now quot it would come out quot wom mpui gin sright n quot That s a new type of lag for me as my PC has never had issues I assumed this was due to the death of the drive and Windows having problems recognizing it or reading it Sure enough when I disconnected it everything ran smoothly I have an iOmega TB external drive LDHD-UP - don t judge it was on sale that I m not too fond of but I use regularly for storage and backup I usually have it plugged into the back of my PC and this presents a whole other issue which I need another thread for but I ve dealt with it fine and it normally works all right However I found out it s USB compatible and my PC has outlets on the top so I wanted to keep it plugged into there But when I do that I experience that exact same type of lag as before when the internal hard drive was plugged in It s persistent and near-constant but it stops the second I turn off the hard drive I ve disabled antivirus I ve ran disckchecks I ve formatted none of it makes a difference Does anyone know what would be causing this with separate hard drives connected in completely different ways Any help would be greatly appreciated nbsp

A:PC laggy and sluggish when connecting additional hard drives

I don't know the answer but will comment about the issue of lag in typing. I have a wireless keyboard and mouse and I know when the batteries need replacing because the keyboard behaves exactly like yours and the mouse stops moving the cursor properly. Maybe your issue's connected with the power being drawn when you have the two drives connected. Don't rush out and upgrade your psu though. I only switch on my usb external hard drive for the occasions I need it.
Relevancy 17.63%

I am building a new system, only part used is the power supply. My motherboard can't detect my hard drive. I tried switching cables but it only detects my dvd drive. Any assistance will be greatly appreciated.

A:Can't detect hard drive

First make shure the data & power cables are plugged in securely, on both the MB and hard drive. and no there is not a power cable for the hard drive on the MB.
Relevancy 21.07%

Hello I have an old HP Pavilion n that has - GB DDR PC ram modules but they are being reported in BIOS as only being at PC and I am just wondering if this is the best that this system can do with this speed of ram or is there anything that I can do to get it to run at PC Here are the specs from CPU-Z Mainboard Model - ASUS P B -LA rev Chipset - Intel i D rev Southbridge - Intel BA ICH rev Processor Intel Pentium - GHz - Northwood Clocks Core Core Speed - MHz Multiplier - x Bus Speed - MHz Rated FSB - MHz CPU-Z is reporting that both modules are PC DDR but the BIOS is indicating PC The BIOS does not have the ability to change anything regarding clock settings and the board itself has no jumpers to change so any input would be welcome regarding any suggestions if this system can actually get full usage of the PC DDR GB modules or if it can only run at PC because of the Bus Speed I thought that if Speed Ram reporting BIOS not correct in the board had a MHz FSB it would run DDR PC ram Any advice would be appreciated Thanks Brian nbsp
Relevancy 21.93%

Hi there! I am new here and I need some help regarding a new desktop I just bought.
MOBO is Gigabyte GA-970A-DS3P and GPU ASUS R7 260X connected with HDMI on TV.
I set up the desktop with win7x64 ultimate.
Problem is when the pc boots and I repeatedly press DEL button to get on the BIOS settings and I see nothing but BLACK on the screen and the mouse cursor which it can controlled through the mouse, though it boots up normally on windows. Any help?

note: I installed all drivers after I installed win on both MOBO and GPU

A:Can't get to BIOS

Are you using a USB keyboard? See if you can find a PS/2 keyboard and try that.
Relevancy 17.2%

Is there any way of sharing hard drives/folder over the internet with the client side need to install anything.
I.e use add network location option in my computer
Or a client programme that is user friendly

The server side will need to run on my computer,
looked at FreeNas thats not an option,
Filezilla looks like it the best option server side of things but uses a client programe.

Im happy to run any programmes/OS's in a VM if that were needed.

Thanks in Advance
Relevancy 23.65%

Hello Yesterday I got a virus on an Acer Extensa laptop Said virus was turning on a fake antivirus whenever I opened a file which wanted me to pay a price for a quot cleanup quot I wasn t able to Acer Extensa 5235 booting problem turn anything on Luckily I managed to turn it off through msconfig and delete the virus files Right now however the laptop won t even turn on The Acer Extensa 5235 problem booting quot Acer quot screen goes on the flickers a few times in the upper left corner and the laptop resets I won t even get to a safe mode The notebook had minimal differences from the factory preset had Win Acer Extensa 5235 problem booting and worked until yesterday I have a OEM Win XP home CD at my disposal at the moment I have already tried Booting through BartPe and an iso image of Windows XP on an USB flashdisk To no avail I get to the BartPe layout but the BartPe file explorer shows no disks available Boot through the disk itself At first it didn t load with the error quot STOP X B xf d Xc X X quot which I was able to circumvent by transferring from a SCSI mode to IDE mode in BIOS When I installed Win XP however I had an error concerning a few uncopiable files described for example here - http forums penny-arcade com discussion cant-install-xp-from-any-disk-to-any-disk I skipped everything and the PC now resides in a quot minimal quot Win Xp preset With the former Win configuration of course absent I think I d be able to fix this if I found the MSCONFIG settings for the Windows I used before and which I mistakenly modified I probably turned off something that now blocks the system from starting Is it possible to do so through the new Windows Xp installation The former Win folder is untouched Win Xp runs from another folder Thank you very much for all help nbsp

A:Acer Extensa 5235 problem booting

I had to look up BartPE to see what it was but I think it's unlikely to save the day in your situation.

Assuming that your priority is to get Windows 7 back I'd first check that you have the Microsoft authorisation code for your copy. If it was pre-installed on the laptop there will be a hidden restore partition and you could try holding down the Alt key while tapping F10 to access it. Failing that option I'd download a Windows 7 SP1 ISO, burn it to disc, reinstall the OS and hope that there are no serious driver problems. Both options mean that everything you have installed and saved will be lost unless you have already made backups.
Relevancy 16.77%

I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.

A:Recovering Lifelong Memories from Windows Recovery-Wiped External Hard Drive

There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
Obviously it's worthwhile trying both of them.
Relevancy 21.5%

Recently something strange happened with my pc and every keyboard I tried to use doesn't work.So I thought by formatting it the issue might be fixed,but since keyboards don't work I can't enter boot menu.Is there any other way to format it?

A:How to format my pc without entering bios?

You will have to remove the hard drive and format it in another pc.
But you can't install Windows O/S on the second pc as it won't run on your original pc.
After you have formatted the hard drive and fitted it back in the original pc, you might find the keyboard works properly again.
This assumes that you have the original Windows DVD and product key, or you have a saved image of your 'C' drive complete to copy back again.
( I would be more worried about why none of your keyboards work, but if you can reinstall Windows again that would solve any keyboard driver issues anyway.)
Hope that makes sense.
Relevancy 19.78%

My brother's laptop is a Packard Bell EasyNote TK87, Like mine, it runs w/ 7 32-bit.

More Detail of problem:
When I click the power button it has the logo and option 'Click F2 for startup menu' I don't click the key and it says 'loading...' and I'll just rebooting the laptop. How to resolve this problem

A:Everytime My Brother Starts His Laptop The Shortcut Key For The BIOS Menu Automatically is pressed.

Go here and make sure u don't have a key stuck.
Relevancy 21.5%

So I have a very strange issue with my laptop.
It's a Toshiba a665-06f
I7 [email protected]
8gb ram
500gb Samsung ssd
Running Windows 8.1 pro

I can't get into the bios it boots in less than 10 secs, I've even tryed removing the hdd to get it to boot to the bios but it just sits at a blank screen when I do that. I've tryed tapping the all the f keys the del and esc on start cant get into the bios or even the boot options. Other than not booting into the bois it works great.
Any ideas please?

A:Unable to access bios

"Other than not booting into the bios, it works great"... So this means you can boot into Windows normally, and use the laptop?
Relevancy 17.63%

I cloned my failing hard drive (a 160gb) to a new one (500gb). The installation seemed to go smoothly enough (it was my first time though) as it just required me to stay grounded and remove about 4-5 screws. When I loaded the PC up it wouldnt start the first time so I had to a Windows repair, which didn't seem to do anything except now it worked (it said it failed or something). I then had an issue with Windows 7 claiming to not be genuine although for one reason or another that stopped. Now my issue is that I am unable to access the additional memory of my new hard drive, I am able to access the cloned portion but not the rest (about 316gb). Any help would be appreciated, my PC is a Dell Latitude E6400 if that helps.

A:Inaccessible Memory on Cloned Hard Drive

Hello there,

It is absolutely normal not to see the rest of the free space in the moment. When you clone a drive you create the exact same image of old drive on the new one. This includes the size of the original HDD. However if you go to Disk Management ( type diskmgmt.msc in the search in the start menu and hit enter) you will see that you have one partition of 160GB and the rest of the space will be listed as unallocated. To use it you have two options ? you can create a second partition or you can extend the original one to take all the available space.

To create a new second partition just right-click on the unallocated space and select ?New Simple Volume?. This will starts a wizard to guide you through the rest of the process. First it will ask about the size of the partition. To use all the remaining space just type in the same value you have for Maximum disk space. Click Next.

Then you will get to choose and available drive letter to assign to this partition. Choose one and click Next.

Then you get to the Format partition window. You should choose ?Format volume with the following settings: ?. For the file system is best to leave NTFS. Allocation unit size as default. You can also put a label for the volume here. Then tick the box for ?Perform a Quick Format. ? Click Next. Then Click Finish. And you're done.

If at any point Windows pops up with the following message ?The operation selected will convert the disk to dynamic... are you sure you want to continue? ? click NO as this will most probably make your Windows unbootable and you will have to reinstall it.

If you want to extend the existing partition right-click on 160GB partition and select ?Extend Volume?. It will start the wizard and will only ask about how much space to add. Just select the maximum available space here and click Next, then click Finish. Once done your existing partition will be bigger and you'll be able to use all the space on your new HDD.

Hope that helps.
Relevancy 21.5%

Hi all,

EEPROM is a hardware piece that the BIOS (which is a code) is inside it. What about some piece named firmware? Is there any independent device named firmware in PC? If so, what does it do?

A:EEPROM, BIOS & firmware

A firmware is a structure code, embedded and instructed written languages that is designed by programmer to communicate with devices attached to the particular device. Most especially of our input devices has firmware inside talk of mouse, keyboard, flash drive e.t.c
Relevancy 17.2%

My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?

In cmd> diskpart> list volume it does not show up. (screenshot attached)

In Device Manager it gets detected. (screenshot attached)

In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)

In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.

What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?

I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.

A:Seagate external hard drive not showing up in my computer. It is detected.

Yes, if you initialize it you will 'lose' everything. You will want to try something like [email protected] Recovery or maybe Easeus Partition Recovery.
Relevancy 28.81%

I replaced the mobo on my Dell 5510. Purchased from Dell. Sticker on mobo says BIOS ver A05. About every other day I get blue screen and physical dump of memory. My system info says my BIOS ver is A07. How do I go about changing BIOS? Is it as simple as pulling battery for 15 seconds? Some have offered this suggestion but I get a little worried at "friends" advice.

A:Replaced MOBO on Dell 5510 BIOS sticker on MOBO says A05, system in still has BIOS of A07

Removing the battery won't change the BIOS version. You need to download the version you require from the Dell site. From Windows you "flash" the BIOS. Take your time preparing for this. If anything goes wrong you will wreck your motherboard.
Relevancy 17.63%

My Buffalo HD which is actually a WD 500GB Hard drive. I opend it up and connected via SATA adapter but still the problem persists. I checked the drivers. Looked for clicking noise as in dead hard drive but none of those problems seems to be there. Also I tried formatting it but was unable to do so. Can anyone tell me whats the cause? It still may be the head problem but its not clicking as a dead hard drive does. It also seems to be spinning just fine but can't get to the root of the problem. Does anyone knows whats the problem?

A:Hard Drive Not Responding

Could be some issue on the PCB. Suppose if you were really dedicated to getting your data back you could buy the same drive off eBay or wherever and swap the boards. That may be more difficult to do since Buffalo may not have stuck to WD the whole time OR WD supplied a special series of drives to Buffalo. Check the model numbers to be sure before going that route.
Relevancy 20.64%

I have a Dell Latitude D630 and the motherboard died, It's out of warrenty so I bought a Motherboard on ebay. The Bios Service Tag does not match the number on the bottom so I would like to chage it to the correct one. How can I do this?

I read about a DST CD = Dell Service Technician CD that has this option but I can't find one.

It's not a real important thing but when I use the Dell System ID application it reads the Bios Service tag and not the real system tag that Is registered to me.

A:How to change the Service Tag in a Dell Latitude D630 BIOS
Relevancy 17.63%

My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .

A:Windows installation can't detect my ide hard drive?

Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
Relevancy 17.63%

I have 2 new external hard discs do show on my computer .They are running but not showing in PC.What to do ? Thank you

A:External hard drives not showing up


I'm not completely certain that I understood your situation. I wonder if it's possible to clarify the question? Otherwise Disk Management is a good place to start looking for a missing HDD.
If the HDD is brand new you might need to initialize it. This is needed if below the disk it says ?Not Initialized?. Right-click on the Disk that says ?Not Initialized? and click ?Initialize Disk?. Then you will have the option to choose between MBR and GPT. If the drive is more than 2 TB you should use GPT, if not you could use MBR as well. Once the Disk is listed as Basic and online right click the unallocated space and click create a ?New Simple Volume?. For the file system choose ?NTFS? if you want to use the HDD on Windows.

Hope that helps.
Relevancy 21.07%

Laptop wont load bios or OS Interesting wont load Laptop bios OS or issue here When I press the power button the HD activity led light comes on for just a second I feel the HD spinning up and running the fan kicks in and runs then nothing No Laptop wont load bios or OS leds flahing just power led no beeps no screen and no bios I v discharged static build up battery out power button held down quot and tried both mains amp battery to no effect There were no precursors to this issue So I can deduce the laptop is unable to complete POST in pre bios despite the lack of beeps yet can supply power to fan amp HD Now the GPU is Laptop wont load bios or OS GForce m GS aware of the issues with the xxx series I v kept the air flow clean and use a laptop cooler Possible suspect though it never ran hot and all worked fine till I turned on a couple of Laptop wont load bios or OS days ago Now I understood that a failure of the xxx series usually presented a degraded screen lines etc rather than failing post I m backed up and use my second laptop so nothing urgent just a oportunity to learn I am interested in hearing from hardware geeks and their thoughts nbsp

A:Laptop wont load bios or OS

Seem to have been redirected here for some unknown reason !!
Relevancy 23.65%

Hello...I will start from the begining .

I bought the Acer V5 and tried booting it came with boot-up Linux which means nothing to me so I made a Windows 8 bootable USB and the problems started. First I could'n find the USB and after enabling the Legacy mode it finally found it and booted from it. Turned out the partitions are GPT and as I made the USB MBR it couldn't install so I canceled which I guess was my mistake but there was no other option. After that I created the bootable USB with GPT partition scheme and tried again. Unfortunately this time I got something called GNU GRUB....wth? I googled around and found the commands required for booting - root (hd1,0), then chainloader +1 and finally boot. Then I get the famous The Boot Configuration Data for your PC is missing or contains errors with Status: 0xc000000e. Of course tried that couple of more times but still to no avail. I cannot recover or repair as Windows was never really installed, so I don't know what to do....Hopefully someone here would be able to help. Thanks in advance guys.

Relevancy 17.63%

So, when I built my PC I installed the OS on a HDD drive with the thoughts that I could later transfer it to SSD,

(did it before using hard drive cloning software to copy the OS drive to a new drive and then once working formatting the old drive.)

however when I started doing some reserch on cloneing software I noticed that windows 7 might not be cloneable (my past experiances are with XP) since there are mixed reviews on each bit of software out there both on Amazon and on the web. sevral report that windows 7 sees the clone as an unlicenced copy and refuses to boot. others say the clone drive misses it's boot file.

can some people advise me on if any of these facts are true or not?

A:Hard drive migration to SSD questions

Cloning should work fine if you do it properly with windows 7. It's possible that windows can throw up a licensing issue, but very unlikely. In the event that it does, call Microsoft and they should be able to get it sorted out for you.

As for the bootability of the drive, cloning the drive's data does not necessarily make it bootable, but if you look online you'll see some cloning tutorials that include a section for rewriting the MBR on your SSD to make it the primary bootable drive in case it ends up not booting properly. This isn't hard to do and usually isn't a necessary step.

Also just keep in mind that simply cloning the SSD will probably result in an unaligned drive, so make sure that you get it properly aligned. Some cloning software has an aligning option built into the cloning process that you'll want to select.

So go for it and come back if you're having any issues.
Relevancy 17.63%

Sorry I must not have sent the last post correctly I am new to this site So I will try again I was getting ready to upgrade to bigger hard drive or drives Before doing that I needed to take the old hard drives out to obtain some information off the labels I did so and while they where out I cleaned the Mounting slots a little better than using just No drives to SATA Power hard air Having done that I re-installed them both When I turned on the power button the button lit up and the fans were running But No Power to SATA hard drives it No Power to SATA hard drives does not seem that the hard drives are getting any power as I can t hear or feel any thing Plus the computer is not booting No Power to SATA hard drives I don t recall unplugging anything other than the two hard drives But I also notice that I have a short cable bundle with two white plugs with three pins and one empty pin hole on the other end a black connection with with five connector slots with one middle on blank That makes me think that I unplugged the power to the hard drive someplace along the ling As I have a wire bundle that has two SATA power connectors that are plugged in But their are three white female plugs marked P P and P which are not connected to anything in that wire bundle I don t know at this point if the power comes through that bundle from the power source Of if I do not have the power plugged into the lope I hope that somebody can help me figure this out and let me know if I burnt out the hard drives and have to start over with my recover disk reloading windows and going from there nbsp

A:No Power to SATA hard drives

How would I close this post out. Dumb me had the monitor plugged into an unused VGA port. It only took me two and a half days to figure that out. I wanted to let others know to check and see if they have everything plugged in where it should be. Including the VGA or other monitor cables.
Relevancy 17.63%

Hi, I have a Verbatim Store n' go ex hard drive which used to work perfectly with usb 3.0 and 2.0. A few weeks ago it stopped working with 2.0 and now not even with 3.0. When I plug it in the hard disk starts to rotate and lights up normally, but is never shown on the drive list. The computer doesn't even do the beep sound when a usb device is connected. I tried on 2 different pc's but they show no result.

Any kind of help is greatly appreciated
Relevancy 17.2%

Hi Frnds

I hav a Toshiba 1 TB external HDD. It was working fyn till today. Now it is not showing in My Computer or Disk Management. It does make the sound when I connect or disconnect it from the laptop. and the HDD light remains on.

Please advise how to fix this


A:Toshiba external USB hard drive not detected in any laptop

Go under the Device Manager and uninstall all the USB Controllers then reboot your PC don't connect the 1 TB just yet. Make sure nothing is connect to those ports like a keyboard or mouse otherwise they'll lockup. Once rebooted Windows will rebuild the table for USB Controllers. Now you should be all set. Unless you have some sort of conflict with IRQ or Registry setting. There is a free app called USBDVIEW what you would do is disconnect from all non-disconnected USB devices that are stored on the PC these settings can cause all sort of issues.
Relevancy 17.63%

My bother had deleted my laptop partition files and folders when attempting to extend my C partition. All my stored partition movies were lost and could not be found in Recycle Bin. Do you know where these partition videos are? I really want to view these videos again. What can I do to rescue them? Thank you for any advice!

A:Delete hard drive partition data

Hey, Luminaton03!

Sorry to hear you are experiencing such an issue.
Your data is stilll there somewhere as long as you don't overwrite it. If you save new data, it would rewrite your previous files.
I did some research for you and I found a threat that you might find helpful:

I really hope this works for you!
Good luck!

Relevancy 17.2%

I recently bought a external hard disk of WD (My Passport Ultra) 1TB. It was working fine untill now. Now there is a problem going on. I have used only 656GB of space but it now show that I have only 4GB of storage left. Earlier it was showing 257 GB of space left from 913GB but now it shows the above. I can't understand what is the problem. If anybody could guide me it would an immense help. Thank you.

Bodhiswattwa Tewari
[email address removed]

A:Problem With My Passport Ultra external hard disk by WD

Maybe @jobeard could help here. What OS are you running? OS X or Windows?
Relevancy 18.06%

Hi I have bought a laptop for my daughter its harddrive is 750gb but when I found it it is two hard initialled OS and the other data how is this supposed to work.regards Martin

A:Two hard drives

I know some manufactures have different ways they produce their setups, but most of the time its a partition and not another hard drive. What it does is store the System Backup / Restore on one partition so that you can reset the laptop to factory settings and the main "hard drive" (usually C prompt) is the partition you use on a daily basis. Unless you physically looked inside the laptop and saw 2 different hard drives, it should be just one hard drive that is split partitions. What is the make and model of this laptop? We can determine what setup you have with that information.
Relevancy 21.07%

I ve got this legendary socket motherboard DFI LP UT SLI-DR Expert chipset nForce SLI almost new only LanParty - UT using BIOS DFI Del motherboard enter Cannot key Expert SLI-DR NF4 one SATA port is somewhat messed up missing those plastic parts from both sides bought this baby really cheap from well known Romanian e-bay like site okazii ro and I put it on my FX- dual core yeah THAT one and some KINGSTON value memory and tried to boot my rig Here is my problem now this board is Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard working those red diagnostic LEDS start next only one left so no quot LEDs of death quot syndrome for me and the onboard speaker beeps ONCE which I know is always a good thing but I cannot enter BIOS to setup as I need Del key on my PS keyboard is NOT working as it should I press the key and the result is nada nothing first I see the boot logo from Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard DFI after that Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard I see this error message quot CMOS checksum error - defaults loaded press F to continue or Del to enter setup quot and when I press Del I get nothig and when I press F key sometimes I see this message quot Verifying Pool Data and Backup CMOS OK quot and other times I see quot Sil SATA RAID Press Ctrl-S or F to enter RAID utility quot One more thing to add is that I can actually use boot menu selection using Esc key to selct HDD CD-ROM or some other option and this board actually can boot using CD DVD I already tried UBCD rescue CD and some Linux live distros to see if it s not a problem with my FX- processor and I m happy that it is working well is all good no problem here actually I ve seen it s name and working frequency Mhz at POST please help me to solve this problem with my mobo nbsp
Relevancy 17.63%

I'm trying to partition my hard drive, when I click shrink, it takes me to the shrinking window and it says:

Total size before shrink: 704749 MB
Size available to shrink: 7185 MB
Enter the amount of space to shrink: 7185 MB
Total size after shrink: 697564 MB

I don't understand how I have so much space, but I can only shrink it 7185. It is an NTFS.
Here's some screenshots

A:Why can't I partition my hard drive more?

Some files that are read only are preventing you from shrinking beyond a certain point while those files are open.

My suggestion would be to use partitioning software that is bootable. Boot to the disk and shrink your partition without windows running.

There are several freeware apps available to select from. The one I use is Partition Wizard Boot CD.
Relevancy 20.21%

Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.

Is there a way to tell which bios I need or what model I now have?

Thank you,


A:Replaced Failed Motherboard.. now how do I determine model number and which BIOS to download?

Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.

HP Support, Drivers, Contact and Help Forums | HP Support
Relevancy 21.07%

I have a Rosewill RC-215 PCI SATA card with an Asus SATA DVD/CD Rom drive hooked up to one of the SATA ports. When I boot up, the motherboard (Asus P4PE) bios doesn't recognize my DVD drive(Asus DRW-24B1ST) so I can't boot up from a repair CD/DVD disk. But once I'm in Win2000, the DVD drive (Asus DRW-24B1ST) is recognized and usable. And it shows up in My Computer, and Device Manager.

I need some advice so I can figure out how to be able to boot up from a DVD/CD when I need to.

A:DVD/CD ROM not recognized by bios, but works after Win2000 starts

You may have to spend a few bucks and get a PATA/IDE DVD drive. You have drivers for the SATA card loaded after 2000 boots, so that is why it works.

Have a look through your BIOS and see if there is any option that supports your SATA card. I remember this back on the A7V boards with the Promise ATA 100 controller vs the 33/66 that was 'included' with the motherboard.

I assume you have looked for that option in the BIOS. If you have, and it doesn't exist, I think you will have to pick up a non SATA drive.

Also, I think its pretty cool that someone is still running 2k.
Relevancy 17.63%

My hard doesn't show up anymore.when I plug it in I hear 2 beep sounds coming from it and then nothing.any one now what the problem might be.

A:WD external Hard drive

Probably an internal hardware failure on the drive. Hope you had your data backed up from that drive.
Relevancy 17.2%

Tried just about everything but I still can't seem to get my external hard drive to show up in my disk management or computer. It say it's installed and ready to use but I don't see it.. only in the device manager and in devices and printers I can see it.. but nowhere else.. I'm working with windows 7 upgraded from windows xp but has be downgraded which was originally windows vista I think.. A friend gave me a computer and I had it upgraded.. can any one help me get my computer and external hard drive straight. Thanks.

A:Don't see my external hard drive in disk management or on computer

Check this thread out:
Relevancy 17.2%

The Seagate Momentus 5400.6 hard drive I'm using is from my old laptop it has 4 disks.
After I put it in the (IT-CEO IT-700) enclosure, and connect it to my new laptop it does not show up in 'My Cumputer' and 'Disk Management', but displays in the 'device and printer' section of control pannel.
I also can't eject the hard drive, even when I'm not doing anything to it, the (IT-CEO IT-700) enclusre's blue signal light just keeps flashing for a while then goes off for a sec, then resume flashing again.
My laptop also keeps trying to install the hard drive.

I tried reinstall the hard drive's driver, but that did not solve the problem.

Please Help.

A:External Hard drive not showing up in 'My Computer', and 'Disk Management'

Have you tried using different drive enclosure other than the IT-CEO IT-700?
Relevancy 21.5%

Hi everyone,

I'm wondering if anyone can help me to set up my bios. I've 'tweaked' this, and ticked that, and now the pc just starts up, runs for a few seconds, and shuts down. I really don't know what to do.


A:Messed up Bios

For starters, your OS ME,XP,7.8 ?
Relevancy 17.63%

I have a Dell Precision T which I just purchased off of Ebay Recognized Possible Hard Formation, Second Not Drive Raid It came with gb of ram and gb hard drives installed In quot my computer quot it shows drive quot c quot but not the second drive This computer supports raid configurations but when I received it it had no operating system installed I installed windows ultimate bit This computer has quad core processors and I have been noticing a Possible Raid Formation, Second Hard Drive Not Recognized slower response time lately which leads me to believe it may be in one of the raid modes even though they are supposed to be faster most of the time Possible Raid Formation, Second Hard Drive Not Recognized I went into the bios and the setting it is on is to automatically detect raid configuration in the drives and if not detected the regular mode I read some information about raid setup and cannot find the software quot Intel Matrix Storage Console quot on the computer to help verify or change settings Could this be an extra program like drivers that are downloaded from the Dell website because they don t normally come with a regular windows install If someone is familiar with configuring raid formations could you please help me determine what my system is set on and how to set it properly I would be satisfied to not have raid active as I don t need that kind of constant backup My work is not that important I can back up important files in other ways nbsp

A:Possible Raid Formation, Second Hard Drive Not Recognized

What shows up in the Disk Manager vs the Device manager?
Relevancy 17.63%

My External hard drive wont open without format I try doing format it gets stuck I try opening computer > mange > disk management it wont open unless I take it out and gets stuck and gives me connecting to virtual disk service
please please help me! im freaking out I need this hard drive to work I need help

A:External hard drive

If you need this drive because there is data on it, formatting is the last thing you want to do.
Relevancy 21.5%

Motherboard:ASUS M5A97 R2.0
OS:Windows 8.1 64-bit

I hardly know anything about the BIOS so I am asking you this:
Will I need to update my BIOS and if so how to do that?
Am I going to update it to the latest version(2103) or the version when the processor was first compatible(1006)?

Please help, I do not want to make a mistake when updating so please provide a detailed explanation ! ! !

A:BIOS update

Some might say updating the BIOS is not worth the risk unless you have a reason to chance it. On the other hand I've never had a BIOS update go badly. BIOS updates are not that difficult to do. But there is always a risk of the update failing. In the off chance of failure, the motherboard will be bricked. There are motherboards that come with a second BIOS for failsafe. I don't know if the failsafe can be used under a bricked board, I will assume it can until I hear otherwise.

There are three ways to update that I am aware of. All of which may not be available depending on motherboard model and age of system.

Within the Operating System (I've used this method but for awhile it was advised against)
You will need to download BIOS Update application. The application will download and install the new BIOS.

Within the BIOS
Within the BIOS there is an update facility. You will only need the new BIOS. (My BIOS will only update from a USB stick.)

From DOS utility
Not only will you need to download the new BIOS, you will need to download the flash utility that is designed for the update.

I recommend updating from within the BIOS (assuming you have this option). Download the new BIOS to a USB stick and then boot into the BIOS. Browse around to find the update facility and the rest is self explanatory.
Relevancy 17.63%

Recently a hard drive named OS (X: ) (space inserted so it isn't posted as a smiley face) appeared in my computer. It seems to be identical in memory to my actual hard drive, but is actually empty. What exactly should be done about this?


A:Empty extra hard drive?

Not sure off hand but I'd open up Disk Management to see what it says there.
Relevancy 21.5%

Hi, I have a custom pc, and I am trying to turn of the automatic fan control (so I can use speedfan to control the fan speeds). to do this, I need to enter the BIOS, but I cant.

when I boot, my pc tells me to press DEL to enter bios, and I do, and... nothing

cue 10 , minutes restarting and mashing the hell out of my keyboard. still nothing.

I dont have a fn key to press, its a standard keyboard, no special bios, just the standard asus bootscreen.

any help?!?

A:Can't enter BIOS

What kind of bios you have is it AMI BIOS, AWARD BIOS, PHOENIX BIOS ETC, try pressing f2 button..
Relevancy 17.63%


Old Dell computer running Windows XP that was never backed up and I am trying to recover files and photos. I get NTLDR is missing when I boot. I've used Testdisk/Photorec to try to recover my data but when going through the recovered data it seems to be all system files that I know nothing about. I used Ubuntu on the Dell to run Testdisk. I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.I also ran a NTLDR boot disk but ended up with the same NTLDR is missing message. I dont have a XP recovery disk. Anybody that has had this issue please help!

A:NTLDR is missing. Hard Drive Failure.

Trobles86 said:

I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.Click to expand...

If you have access to another PC or laptop then you can connect the hard drive in to that machine and get the files you wanted to recover from your hard drive in there.
Relevancy 17.63%

Please help my segate external hard disk 500 gb not working all of the solutions are not working please any solution but not that solution of computer manage please help and replay fast

windows 7 (64)

A:Seagate external hard disk

Man... that sucks. If ALL solutions are not working you are screwed.

Please read the link in my signature and try again.
Relevancy 17.2%

I am a beginner of hardware. I find two series of SSD to compare, 840 EVO and M500, because the specifications and the prices of them are approximate.

Both of them use SATA 3, so you need to compare with the read speed and the write speed, if you prefer faster one. The sequential read speed of 840 is 540MB/s, and the sequential write speed is 410MB/s. M500 is slower, but the performance of M500 is great as well, its Shock-resistant design makes it more durable than 840. The most important thing of SSD is the controller, 840 uses 3-core Samsung MDX controller, M500 uses Marvell?s latest controller, maybe the second one is better.

This is my poor review, how to compare them with more details, give me your advice.

A:The comparison of hard-state-drive, Samsung VS Micron

Read in-depth reviews such as this:
Relevancy 17.63%

I have a Western Death Disk Hard After Click of Digital Gig Drive which experienced the Click Of Death Hard Disk After Click of Death while accessing the drive It took out the last gig of the drive The first half on Check Disk works perfectly But when check disk attempted to go through the section where the COD hit it jammed the program and stopped saying it wasn t able to repair the area The drive was used for music storage in an automation system I partitioned the damaged area off so it cannot be used or accessed When the drive was connected to the last system I had it in the system s SMART said to quot back up all data that failure was eminent quot After partitioning off the ripped up area of the platters is it possible to use this drive as a slave only I may be coming off sounding like a mad scientist with this thought But if it s possible at all to continue using this drive I d love to use it for storage only No OS and keep the partitioned area marked off so it s no longer accessed what so ever I m I barking up the wrong tree with this thing or is it still able to work All data which was on it before the damaged area was saved easily The good section still works and saves data without issue Just curious about this If it works I ll use it if not I ll replace it and use it for a paperweight nbsp

A:Hard Disk After Click of Death

Ray G said:

I partitioned the damaged area off so it cannot be used or accessed. When the drive was connected to the last system I had it in, the system's SMART said to "back up all data that failure was eminent".Click to expand...

My experience with drives has been exactly as the Smart warning. Once the drive starts to fail, it will not stop deteriorating. I would say the drive is history and should not be trusted further, not even as a slave.
Relevancy 17.63%

Hello all!!!! My name is John. I am trying to find some help with an issue that arose after I installed a new hard drive in my computer. I started getting a message that stated:

C:\Users\Owner\App Data\Local\Conduit\API Support\API Support.dll

Anyone know how I can repair this? I saved an image of my system before installing the new hard drive and then just downloaded the image to the new hard drive. HELP!!! please!!

A:Installed new hard drive

You might just need to run some registry cleaners to fix and remove those corrupt registry keys.
Relevancy 17.63%

My computer recognizes that the hard drive is there as local disk E but wont actually load. I can get it to load on my tv but it wont play my movies. Please help it has a lot of important things on there,

A:External Hard drive not loading

You could try running chkdsk /f in command prompt to check and fix errors on your drive.
Relevancy 21.5%

Hi there. Since I bought my new mouse and illuminated keyboard, when I use the PC a lot, they have spontaneously been stoping for a period of time and then they work fine. I didn't have this problem before because I had a ps2 keyboard. Now I have USB mouse and keyboard and this happens. I do believe there is a problem with the power management. A friend of mine has the same motherboard and he incurs the same problem. I have a Gigabyte GA-B75M-D3V and here is a printscreen of my bios with the power management tab.
What settings should I change?

A:Bios power management


I think you'd be able to adjust that power management settings in Windows under

Control Panel>Power Options>Edit Plan Settings>Change Advanced Power Settings>USB Settings
Or in Device Manager>USB Root Hub Properties>Power Management Tab
Relevancy 17.2%

I have had a look round the posts but nothing I try stops the internal drive getting accessed.
I have unchecked the CD autorun using TweakUI (this worked for someone else)
I have temp disabled AVG along with BoostSpeed and Team Viewer
The only process running apart from sys idle is svchost.exe (1%)

I hope someone out there manages to work their magic as they did the last time I posted here!

A:Hard drive light flashing with nearly no processes running

Sounds like the System Index service is running.

When you find that happening, disconnect from the Internet to be sure MS Update is not running or something on your system is phoning home to be sure.

To see all Internet connections from your PC, grab a copy of CurrPorts - - runas admin and you will see everything. Click on the column heading Remote Host Name to get active connections at the top if the list. The menu Options is used to customize the display; here's my list

display Listen, Established, TCP, UDP, IPv6,

display port in The Address,

sort on refresh,
Ask Before Any Action
That last one is interesting; running as admin, you can Close a port or Kill the application with that port.

CurrPorts identifies all ports on the pc (mine number 112 as I write) and if I select all ports with a Remote Address, I see I have 20 connections.

btw: Remote Addresses shown as are local services (like a proxy or AV service), so out of the 20, only two are actually remote - - both HTTP browser connections.
Relevancy 17.63%

I have to say I am a little worried about my hard drive. Often I bought it for the purpose to protect my game videos, and some program files. For a long time, it behaved rightly with my HP windows 7 desktop when directly used. Sometimes ago I decided to let this old PC alone and bought a Macbook pro. The latter has no such a SATA interface for me to input the data from this drive. For the convenience, I borrowed this SATA dock from my brother . ( I have to admit previously I once use another dock to exchange the data . )

My mac just could not recognize my drive as a normal one. I am not sure where the problem lies in. The key is that other drives have no similar issue with this dock. I wonder if anything happen before in the process I handle the data with another dock.

Grateful for any advice.

A:Previous WD hard drive 500GB could not be recognized as it always

Yeah. At present I have no such another one to have a try. I will turn to my friend see if any gadget he has to test my drive.
Relevancy 17.63%

Okay not really very good at this but my laptop stopped working so I took hd out and connected it to anotherlaptop through usb lead it appears in my disk management (although it shows up grey instead of black or blue if that makes sense to anyone) but it wont show in my computer I have a load od family photos on this drive and would really love some help and will send out good karma to all who try to help me many thanks in advance

A:Trying to recover data from crashed hard drive

Hi techmichellenot. When you say it stopped working,is there anything on the screen when you power up, or any indication that the system passed it's POST procedure (Power On Self Test), usually indicated by a beep before Windows itself tries to boot up?. Any error messages seen?. Sounds like you put the drive in an external case that can connect via USB. If there is indeed a problem with the disk drive and it's not a physical problem with the drive (maybe a corrupted Windows boot file,etc),your system may have a Recovery procedure that will reinstall your OS without erasing your data files (called a non destructive OS reinstall) as opposed to a destructive which erases everything and reinstalls the OS. I would check your documentation to see if your laptop has such a procedure.
Relevancy 21.5%

Hi guys,

I'm going to find the following info about new/recent computers. Is there anyone who likes to help?

1-Where the BIOS is stored on the motherboard? Inside the ROM, EPROM or something like USB storage on the motherboard?

2- I have also heard that this (BIOS) is stored into CMOS and a battery supplies the power for the settings of the BIOS, correct?

3- Also I have read that in the new motherboards there is a jumper that can delete the settings of the BIOS. What's your thoughts?

Thanks in advance.

A:BIOS & ROM on the Motherboard

1. See #2
2. CMOS is correct, sometimes these are removable chips.
3. Yes, many motherboards have a jumper to reset to defaults, this is pretty important for overclockers, because you can set the BIOS to settings that are so unstable the computer can't get to the BIOS.

4. Your definition of recent/new is not in alignment with what most people would say is new. Motherboards for a few years now have been shipping with UEFI rather than a traditional BIOS.
Relevancy 17.63%

Hi All,

I have WD 1 TB passport, and all its operations are very very slow.
I cant use it at all. I have all the important documents in it.
Please someone help me out here.


A:WD hard disk all operations very slow

The only thing I can really recommend is to defragment the external HDD using a program such as Defraggler.

If that doesnt help, you may have a virus on the HDD, in that case, I would recommend posting in the malware forums.
Relevancy 18.06%

Hey Guys. I would like to upgrade my computer. I've got a 40 GB HDD right now. Is it possible to add another 80 GB HDD to my computer? If so, how? Could I use both the HDDs?

Another question. I've got 512 MB RAM right now. And they are of PC2700 type. Is it possible to remove them and add PC3200 type RAM? And while inserting RAM, is it true that we should put it in sets of two? I mean if I want 1 GB RAM, could I put 2x 256 MB and one 512MB or should I put only 4x 256 MB?


A:How to add new hard disk and RAM?

A general rule of thumb but not an absolute is, you can put in better RAM. RAM will simply down-clock to the highest settings the motherboard supports. But like I said though, it is not an absolute, as you can still find incompatible RAM.

amalsk said:

Hey Guys. I would like to upgrade my computer. I've got a 40 GB HDD right now. Is it possible to add another 80 GB HDD to my computer? If so, how? Could I use both the HDDs?Click to expand...

Before we can answer with a direct answer, we need to know if you are working with IDE and/or SATA ports. I'm certain your machine is IDE, but I'm not certain it has free IDE and/or SATA ports. Short answer is yes you can, it all depends on the availability of port and finding a drive that will connect.

amalsk said:

Another question. I've got 512 MB RAM right now. And they are of PC2700 type. Is it possible to remove them and add PC3200 type RAM? And while inserting RAM, is it true that we should put it in sets of two? I mean if I want 1 GB RAM, could I put 2x 256 MB and one 512MB or should I put only 4x 256 MB?Click to expand...

Your machine likely doesn't support Dual Channel Mode. I'm almost positive DDR memory doesn't support Dual Channel, but I'm not going to swear to it. If that is the case then it wouldn't really matter as long as the RAM is compatible with your system. The best way is to stay with RAM you know is compatible or is recommended for your board. Dual Channel though is the main reason, you would want matched RAM modules. With all that said, I personally always like keeping the same speed modules regardless of whether they needed to be matched.
Relevancy 25.37%

I have an ASUS MeMO Pad 7 inch non HD keep that in mind total different situation. But I cannot Factory Hard Reset it by using any normal button combinations or reset button. I have done a lot of research but have come up empty. The reasoning behind the need to perform factory reset is the number pin to log in was forgotten. Yea, yea I know I should not use it but it happened so non the less any ideas?


A:Asus MeMo Pad 7 Inch non-HD will not factory reset

So you can't get to the factory reset menu? Holding the power button will turn the tablet off right?
This might help:
Relevancy 17.63%

Hi all I have custom built pc and in last month now and then it switches off I believed it to be a faulty psu but now ive notice blue screen couple of times I looked it up and it points to faulty hard drive .also on restart I get few chkdsk .so I thought ok I got spare harddrive ill clone main one on to that and use that but when I plug it in it shows up but making a weird noise, also secured by bit lock,, I put password in and then it dissapears with error something like cannot be specified ...does this mean both hard drives have failed or could it still be psu maybe not giving enough power..thanks in advance.. any more info please ask

A:Hard drive fail

A noise coming from the hard drive you replace is faulty,,, it's indicates mechanical better buy new one...
Relevancy 17.63%


I have a 500gb external hard drive which, up until a few days ago, was working absolutely fine.

When I would plug it in to my laptop the device was found under 'my computer'.but would not open. Instead when I tried to open it my computer froze and the 'not responding' message was shown, resulting in a forced close of my computer. Now when I attach the hard drive and open 'my computer' the hard drive does not show at all, but 'my computer' still shows the message 'not responding', resulting in a forced close.

I've been on to a couple of forums already and tried the route of right clicking 'my computer', 'manage' and 'disk management'; but the hard drive does not appear there.

I'm at a total loss what to do and would massively appreciate your help as I have backed up company data on to this hard drive.

Thank you in advance!

A:External hard drive not showing in My Computer

Hey pcrquals. I would try the drive in another pc to narrow down where the problem is, a problem with the drive itself, or a problem with the pc recognizing the drive, which might be a problem with the USB port(s) or with the USB drivers. Does another USB device like a flashdrive work when plugged into the same port?
Relevancy 17.63%

I have an external WD hard drive, I accidently removed the network file and folder sharing componet. Now when I go to access my hard drive it tells me that access is denied. I dont want to lose the data. Is there a way to restore this opion and gain access? PLease help. I oringially was trying to limit access to this hard drive.

A:WD external hard drive

Google How to Take Ownership for the instructions your version of Windows. Try taking ownership of files/folders on the drive
Relevancy 17.63%

You saved an old hard drive (or three) from previous computers and now you?d like to get at the data on them. Is there an easy way to access the data without cracking open your current computer and mounting the hard drives inside?

Read more

A:How to Get Data Off an Old Hard Drive (Without Putting It in a PC)

very good. I was trying to explain this to someone. Now I think I will just send then the Web Page.
Relevancy 17.2%

I've been having this problem for a few months now. I recently built my own computer, having been on a lap top for a couple of years, and found my old external hard drive. I plugged it in to the new computer, and it said something about needing to be formatted, which I promptly did due to nothing of importance being on it. I went to sleep, and woke up to see that it couldn't be formatted.

This is where my issue begins. It no longer appears in Computer, or Disk Management. Disk Management won't even load if I have the drive plugged in. There seems to be no way at all to format the drive, since Computer, and Disk Management both don't load when the drive is plugged in. Any help?

A:External Hard Drive is Not Recognized in Computer or Disk Management

I have a similar problem. I have an old external hard drive and it wont showed up or open under my computer or disk management. I tried to open it under disk management but there is no way to be found. The files F, G, H, etc are empty. I really appreciate an extra help here since I am not a computer expert. Thank you!!!!
Relevancy 17.2%

How serious is this? I'm running on a Dell laptop with a Intel(R) ICH9M-E/M SATA AHCI Controller.

It is saying that I should back up all of my important files because of possible hard drive failure.

PLEASE HELP? I don't know how to fix this because I don't know what it means.

A:Hard drive is reporting a Smart Event error message

It telling you your hard drive is on its way out. You can try running a check disk and see if that helps. But to be on the safe side you should back up your personal files.
Relevancy 15.48%

I have an external hard disk of Samsung 650GB which got damaged when I was transferring some files to my pc through it. Now when I connect to any PC or Laptop it shows the safely remove icon but there is no letter assigned to it and also doesn't show up in My Computer though it can be seen in Disk Management.

I tried Mini Tool Partition Wizard but when I create a new partition it stops at 90%. I tried wiping out the partition but to no avail.

Is there any solution for it??? Please help.

A:Creating A New Partition Or Wiping A Partition On External Hard Disk Stuck

I would check the manufacturers site for a windows utility to low level format it. If you cannot find a utility to do that on manufacturer's site, then try this: to wipe the drive. WARNING!! this will destroy all data on the selected hard drive!! be very careful when selecting a drive to wipe that you don't inadvertently select the wrong disk. After a low level format, unplug the drive, plug back in, windows should detect as a new, virgin, drive and it'll prompt you to format it. Format it and hopefully everything will be fine from here on out for you.

Post back, Hope this helps!!
Relevancy 16.77%

Hello all I made a post regarding the performance failing of one of my supply power affect hard performance? drive/computer Faulty hard drives The conclusion we came to has unfortunately not resolved my problem and I am beginning to think my Power Supply may be the culprit Faulty power supply affect hard drive/computer performance? ------------------------------------------------------------------------------------------------------ Before I go into details here is my current Hardware Q GHZ GIGABYTE EP -DS R GB PC mhz x gb x gb Nvidia GTX mb requires x pin power adapters Asus Xonar soundcard requires floppy power adapters Windows x Jeantech W PSU modular PSU PCI-E nodes and nodes for other devices gb HDD operating system tb HDD data tb HDD data tb HDD data - added recently ------------------------------------------------------------------------------------------------------ My original problem in brief Upon accessing certain files in one of my TB drives I hear a distictive quot click lockup halt quot sound and then the entire system crashes first the drive will become inaccessible then windows explorer will crash followed by the mouse and eventually a BSOD after a minute ------------------------------------------------------------------------------------------------------ I bought a new TB a month ago to replace what then I thought was a failing TB drive Since the problems have become quot random quot and happen across all four drives tb tb gb tb I am now considering my PSU the culprit Jeantech Absolute w It seems logical to me Sometimes while performing tasks which put stress on several HDD s at the same time my computer is quot choking quot running as fast smooth as it should but with sudden freezes with those HDD quot click - stop - restart quot sounds Booting into windows is failing from time to time freezes on the quot starting windows quot screen or DISK BOOT FAILURE Insert system disk The PSU is modular - could certain quot plugs quot in my PSU are faulty I haven t tested this extensively but in some cases when the computer is not starting up at all using different power ribbon cable combinations seems to help Also I had to remove my DVD drive completely when I first installed the new TB I bought and I don t think my computer will start at all with it plugged in anymore so my PSU MUST be having a hard time coping with all the components If it is of any relevance I use an Nvidia GTX which requires x PCI-E pin power connections hard drives power is supplied via THREE modular ribbon power cables - two HDD s share power from the same ribbon cable lastly worth noting I use an asus Xonar sound card requires floppy power connector several symptoms suggest the PSU any thoughts nbsp

A:Faulty power supply affect hard drive/computer performance?

a 1000Watt shouldn't have any problem coping with the components that you have, i would recommend that u borrow a power supply from a friend and try it out on your computer, maybe the power supply is old and is not supplying proper voltages on all the rails....
Relevancy 17.63%

Sir, my 500 GB Portable Seagate Hard drive is not being detected anymore in My Computer but it shows up id Disk Management. When I start disk management, it tries to initialize my portable drive but reports an I/O error. Also it shows my hard drive as an unallocated and unknown device. Is there any way I can get my disk back to use without losing my datas in it?

A:Hard drive not detected

Not very likely, at least not easily. Try it with another computer before you do anything further. Also try a different USB cable.

If those both fail, you might have some luck breaking open the case and getting at the drive itself and then placing that in an external dock..
Relevancy 21.07%

Hi, I can't find the settings for the CPU voltage in my BIOS. I know it's a H board, but can I lower my CPU voltage? If so how?


A:Asus P8H77-V BIOS - how to change CPU voltage?

The H77 chipset does not allow you to alter CPU voltages. That can only be done on a Z77 motherboard/chipset.
Relevancy 17.63%

Is this the right Forum I have an older Compaq nc with a failing Fujitsu G HD that I decided to replace with a SSD PATA IDE drive Transcend TS GSD GB IDE Hardware Agere Systems AC Modem Broadcom NetXtreme Gigabit Ethernet Intel R Ultra ATA Storage Controler - CA HL-DT-ST RW DVD GCC- N DVD Drive ATI MOBILITY RADEON Series Display Adapter Intel R PRO Wireless BG Network Connection O Micro OZ M MemoryCardBus Controller Intel R Pentium R M processor GHz Started machine with OS recovery disk to load windows XP Loaded SP and all drivers Computer seemed SSD Hard Drive installed OK at first Then every time it is started up Windows loads up SSD Hard Drive installed to the background and stalls It takes another minutes or so to get the task bar and systray Also after a minute or so a window opens to tell me that a driver for some hardware has successfully loaded but the list of the hardware is blank Then the CPU maxes out the fan starts and the machine slows way down When I look at processes in Task Manager there is a svchost that is using of the CPU cycles When I kill this svchost process the machine runs much more in line with what I expected What do I do to fix it I need for this computer to run with the SSD drive nbsp

A:SSD Hard Drive installed

Is the SSD seen by the bios? The OS recovery disk is in a CD drive?
Relevancy 17.63%

Hi all,

My laptop's hard drive has been getting worse and worse in the past 2 months, eg. freezing for up to an hour at a time, heating up to painful temperatures until it overheats and crashes. But today she finally died and is completely unable to start.

A systems diagnostic gave error 2000-146, which apparently means hard drive failure. But everything's already backed up and safe, so I'm quite happy to just replace it.

But... I don't know how on earth I would go about doing that, or what I should be looking for when buying a new laptop hard drive, ie. what the difference is between a desktop HD and a laptop one.

So... Any advice?

A:Replacing a laptop hard drive

Hey Partian Shot. A desktop drive is bigger and will generally have greater capacity. What is the make and model number of your laptop?. Do you have the Windows OS on a disk?
Relevancy 17.63%

I have 500GB hard drive, down to 220 atm. Anyways, I notice sometimes it will read 190GB, but when I go to download something or whatever, or if a day or two pass, it goes back to 220GB. Do my computer needs to take hard drive space to do something? anyway to fix this?

I am picking up a second hard drive soon 1tb , but was curious about this issue .
Relevancy 21.07%

Hi A couple of months ago the system drive on one of my old PCs suddenly stopped working - not particularly Operating by Systems by BIOS Recognised Drive not IDE surprising given that it s about years old I swapped it out and left it until I had IDE Drive Recognised by BIOS not by Operating Systems time to try to pull the data off it It s a GB Western IDE Drive Recognised by BIOS not by Operating Systems Digital Caviar WD AB- CDB EIDE drive Now when I connect it to the secondary IDE bus on my PC it does seem to spin up and the BIOS recognises it no problem but neither Windows XP Disk Manager nor Slackware Linux cfdisk do This is not a situation I ve come across before disk recognised by BIOS but not the O S Does anybody know what the problem might be and what I can do to try to resolve it I have been pretty careful with its usage over the years eg not having a paging file which I guess is why it has lasted so long but I don t really need to use it any more - I would just like to pull the data off it if possible without incurring significant expense Edit I forgot to say on bootup SMART reports no problems Thanks very much g nbsp

A:IDE Drive Recognised by BIOS not by Operating Systems

Hey 3g. I've never been in that situation myself, I do believe the BIOS only reads parameters about the drive that it gets from the preprogrammed circuits in the drive, whereas Windows is trying to actually read data off the drive and can't. Is the drive configured correctly for where it's placed with it's jumper pins?. You may want to run a diagnostic test on the drive from the link below
Relevancy 21.07%

Hi there Been Bios and problem Beep keyboard looking around the internet for answers to my problem but didn t find any My computer beeps continuously Bios Beep and keyboard problem at startup When windows loads it stops There is no pattern in the beeping My Bios in Insyde H can t get in advanced mode by the way After startup the quot sign is appearing in the logon textbox a few times And the letter d is not working Bios Beep and keyboard problem A week ago I had a lot more letters not working and also a beep at startup Used an external keyboard and disconnected the laptop keyboard from the motherboard Problems were gone So I ordered Bios Beep and keyboard problem a new laptop keyboard replaced the old one and the beeping started all over again and I m still pasting the letter d The on screen keyboard works fine Sometimes when I use a few programs simultaniously the CPU temperature gets pretty high but that has happened before did a ram test and no problems found Malwarebytes Can t find anything What else can it be I have a Packard Bell easynote tk laptop and use Windows ultimate bit Thanks in advance Tom nbsp

A:Bios Beep and keyboard problem

Anyone an idea?
Relevancy 17.63%

I bought a hard disk around 3 months ago. While watching a video today, it stopped working. It is not neing shown in My Computer or in Disk Management. But it appears in Devices and Printers.
Please help as there was some important stuff in it.