I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
I am trying to image this laptop from wds and looks like i am getting below error:
"windows could not set a partition active on disk 0. The target disk, partition, or volume does not support the specified operation. The error occurred while applying the unattend asnwer file's <DiskConfiguration> setting. Error code: 0X80300024"
Please see my attached answer file, not sure if that is somthing with this laptop model since even i try to go to it's pre installed windows, it just don't take me to windows.
Moderator note: serial number removed for member's protection.
xml version.docx ?13 KB
Hi There, I am trying to image this laptop from wds and looks like i am getting below error: "windows could not set a partition active on disk 0. The target disk, partition, or volume does not support the specified operation. The error occurred while applying the unattend asnwer file's <DiskConfiguration> setting. Error code: 0X80300024" Please see my attached answer file, not sure if that is somthing with this laptop model since even i try to go to it's pre installed windows, it just don't take me to windows. Please advise!
xml version.docx ?13 KB
Hello! I have made many driver pachages and image loads of lenovo pc, but i cant figure this one out. I think I have spent 4 hours of researching and I have realised I need to put down my pride. I need help. Using:Sccm 2007.WinPe 3.1 I'm using the Onelink+ pro usb to RJ45 adapter to get ethernet. It says it supports PXE. We use winpe 3.1 and want to deploy Win7.I have added all the drivers from Lenovo sccm pachage. I have turned "only legacy" in the bios. I have added the USB3 Exstension driver to both the image and WinPE. I get to download the Winpe and start it up. It have an IP and shows activity untill it start Winpe and check connectivity. It show error, but simply just reboot. When i f8 and type ipconfig /all it shows nothing. Please help me.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-model-20FB-Deployment-issues-PC-restart-after-loading/td-p/3351416
Hi, i just bought X1 Carbon (20FB series) running on windows 10. there's a sim card slot, but when i insert the simcard it keep poping out from the port the question is, is this laptop really support sim card? and how do i know if it work when i can properly insert it?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/x1-carbon-20FB-sim-card/td-p/3482102
I recently got a X1 carbon 4th gen (20FB), and I have been super happy with its performance. However, it seems like whenever I have the laptop closed, the keyboard is leaving a mark on the screen. I sent it to repair, and they changed the screen, but that didn't seem to fix it. I noticed that the body and the lid are not perfectly aligned - one of the corners of the lid seems to be jutting out a little bit with respect to the rest of the body. I've attached picture to show this. I'm not sure if this is a part of the general design of the Carbon. Can anyone with a X1 carbon 4th gen confirm that this alignment feature is not present in their machine? Thank you ?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-carbon-4th-gen-20FB-lid-and-body-alignment/td-p/3441108
Hi, We are having an issue with our X1 Carbon's(20FB). The audio output via an HDMI cable works, we see the Epson speakers in the playback devices. After the user is logged on for a while, the speakers will no longer showup in the playback devices and the auidio will just come through the laptops speakers. After we restart the computer, the audio will again work and play to the speakers. Windows 7 X64 Any help or thoughts on this is greatly appreciated. Thanks,Johnhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-Audio-Issue/td-p/3464159
Hi, does anyone know if there is a list of compatible embedded LTE chips that will work on a X1 Carbon 20FB? The reason why I ask this is bec the current model, EM7455, only operates at some frequencies that some abroad contries do not support and the older models such as the EM7355 support those frequencies. One being GSM. I tired to install a EM7355 into my 20FB laptop but the bios isn't allowing it. Thanks!
EM7455 is versatile enough and supports a lot of 4G/LTE including LTE-A and 3G bands worldwide. It does not support 2G (GPRS/EDGE) access technology.
__________________________________ThinkPad (1992 - 2012): R51, X31, X220, Tablet 8.Do you care about privacy and security ? Leave Google behind
Hi, I've got an X1 Carbon 20FB (4th gen), and noticed it doesn't have Lenovo System Update on it, which I've found useful in the past. So I went to the Lenovo downloads site and found System Update, but it doesn't list the 20FB as one of the X1 Carbons it supports - it only goes up to 20BS, 20BT: http://support.lenovo.com/se/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-... (See the "Note for ThinkPad X1 Carbon users") Should I avoid downloading System Update then? I've not noticed anything that's not functioning, but I figured it makes sense to keep things up to date from a security and features point of view. Why is it not included by default? Thanks for any advice!https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/System-Update-on-X1-Carbon-20FB/td-p/3427436
Hi, I have x1 carbon 20FB and I have Synoptics WBDI bio scanner. Device is working fine when I try to use scanner to log in to the computer. I'm interested in ability of using the scanner to store other passwords from secured web sites utilizing the scanner. Is it possible? If so - what do I need? Thanks, Jakar55https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-Fingerprint-Scanner/td-p/3457424
We've purchased about dozen th gen x carbons machine type fb and nbsp have been having some intermittent keyboard issues with multiple laptops nbsp At least different units have had problems where the keyboard doesn't seem to work at all nbsp After power on nbsp we press F F or Enter to try and access different functions but they have no effect nbsp Once windows loads we still can't type anything nbsp nbsp The first time my tech ran into this he nbsp rebooted a few times and was still experiencing the same issue he nbsp set the laptop nbsp aside for me to look at nbsp When I turned it on they keyboard was functioning normally nbsp Later after loading our image on the computer he was preparing to deploy it to a user when the keyboard stopped working again nbsp I fired up a new laptop this morning fresh out of the box and had the same issue a non-functional keyboard nbsp In this case at least the touchpoint touchpad didn't work either nbsp I rebooted tried to get into UEFI config and after a couple of more reboots I tried pxe booting but nothing I pressed on the keyboard seemed to help nbsp I turned the laptop off and put a note on it that it had a bad keyboard iss... 4th intermittent Carbon x1 gen keyboard (20FB) but when my tech came in and turned it on a couple of hours later they keyboard is working fine nbsp nbsp I've got one in front of me right now that was working this morning but now the touchpad point aren't responding nbsp Keyboard is working though nbsp nbsp Lastly we issued one x1 Carbon 4th gen (20FB) intermittent keyboard iss... of this model to a user recently and she has intermittently had the keyboard stop responding while she's in the middle of working on a document nbsp After a few minutes it might start working again nbsp nbsp These issues may or may not be related to each other but it's very x1 Carbon 4th gen (20FB) intermittent keyboard iss... odd behavior and we haven't quite been able to pin down the cause nbsp Anyone else seen something of this sort nbsp Any suggestions
Hello all, We've got the same problem here with our x1 Carbon 4th gen (20FB). Lucky, we just purchased 2 but not 2 dozen. Both of them have the same problem which same as Swhitcher. We've called the Lenovo support hotline and ask for the onsite support. The on-site engineer replaced the mother board for us, but after 1 hour, problem occur again. We're going to deploy those computers to the end user very soon.So please, give us the solution as soon as you can, Lenovo!Many Thanks! Willihttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/x1-Carbon-4th-gen-20FB-intermittent-keyboard-issues/td-p/3375037
Hi all, I have have new X1 Carbon and really like it. However I am getting regular BSOD failures once or twice per week. I am running Win7 Enterprise SP1 and have all the lastest Lenovo urgent updates installed and most of the recommended and optional updates installed too. The BSOD have been of the following types:KMODE_EXCEPTION_NOT_HANDLED (1e) on June 28thMEMORY_MANAGEMENT (1a) on June 30thBAD_POOL_CALLER (c2) on July 6thMEMORY_MANAGEMENT (1a) on July 7thDRIVER_CORRUPTED_EXPOOL (c5) on July 21st At first I thought it was faulty RAM so I ran MemTest (http://hcidesign.com/memtest) for over night for two nights in a row and no issues were detected. Has anyone encouneted this issue and know how to fix it? Any recommnedations from Lenovo? If required I can attached detailed log dmps. Thanks,Ian
Look in the event log to see if a driver is throwing an error before the BSODshttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Frequent-BSOD-with-2016-X1-Carbon-20FB/td-p/3377470
Carbon X1 connected to OneLink+ with current firmware 2.30 OneLink+ dock is connected to 2 DisplayPort monitors and some USB devices 1. If the X1 display is closed the system hangs on starting Windows2. If I open the lid and re-power the system and start up windows. Once I can get the the Login screen, I can then close the lid and all is good. Both external dispay work fine 3. X1 boots fine when not attached to OneLnk+ Workaround - #2 is not a great option in the long term Any help would be appreciated Stevehttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-won-t-boot-unless-display-is-open-when-connected/td-p/3434429
I'm setting up a new X1 Carbon with machine type 20FB. It came with a Samsung MZNTY256HDHP SSD. I noted there was a recent SSD firmware update package for this laptop model, so I downloaded and ran the updater. It reported there were no updates. However, after digging a bit deeper, I discovered that the SSD firmware updater for the X1 Carbon 20A7/20A8/etc. DOES have an update for the SSD in this machine. What is going on here? Does this firmware update somehow only apply when the SSD is installed in a 20A7? Or did this particular model of SSD just get missed when Lenovo was putting together the firmware update package for the 20FB?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Missing-SSD-firmware-update-for-X1-Carbon-20FB/td-p/3485035
We've got about dozen of the th gen x carbons machine type FB and have had a high number of display related issues with them nbsp At the moment we have sitting upstairs waiting for UPS to pick up for shipment to lenovo service and one more on my desk that was Display X1 (20FB) flickering and/... issues -- Carbon just acting up nbsp I'm told that we have previously sent in at least another or laptops for similar issues nbsp I understand that those previous laptops had the displays replaced and that we have yet to see a recurrence of the issues in one that has been repaired nbsp The problems we've seen X1 Carbon (20FB) Display issues -- flickering and/... are intermittent and generally fall into one of two categories FlickeringVideo X1 Carbon (20FB) Display issues -- flickering and/... garbled missing sections or complete garbage nbsp The flickering is sometimes very faint barely noticable but other times it's more pronounced bad enough that users complain of X1 Carbon (20FB) Display issues -- flickering and/... headaches and or it's going to cause seizures nbsp The garbage video issue is what I just saw with the laptop sitting on my desk nbsp It went to sleep and when I woke it up this was what I saw nbsp After a few moments the laptop rebooted on it's own and the display was back to normal but I don't want to send this out with a user now just to get a support call when it nbsp happens again nbsp Is anyone else having this sort of issue nbsp Or did we just nbsp particularly unlucky nbsphttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-Display-issues-flickering-and-or-garbage-video/td-p/3400877
I recently reinstalled my windows 10 system and then can not find my wireless card. In the Device Manager, there is two hardware without drivers. 1) Network controller; 2) PCI simple Communications Controller.I went to the Lenovo support page and find out I need to install Huawei Huawei ME906s Wireless WAN Firmware Updater for Windows 10 and 8.1 - ThinkPad. However, I can not install this. It showed "Error code 10: Find port failed" Did I install a correct version. Or what kind of drivers I need to install for my wireless card. My model is :X1 carbon 20FBSystem: Windows 10 Thank you very much!https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-CAN-NOT-install-wireless-drivers/td-p/3479332
Hello, I have this problem for month now :I close my X1 Carbon lid before going to bed, and in the morning, when I resume it from hibernation, the trackapd and trackpoint are totally unresponsive. Everything else work fine, I just have to wait, sometimes 20/30sec, sometimes a whole minute, to have the trackpad working. This is very frustrating to have a computer resuming so fast from hibernation but being unable to use it. I have the latest BIOS (1.15), latest UltraNav driver (220.127.116.11).Tried several drivers uninstallation/reinstallation, several fresh windows install, problem is still present. Actually on a fresh install of Windows 10 64bit (Anniversary update).https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-20FB-Ultranav-unresponsive-for-30sec-1Min-after/td-p/3386336
Hi, trying to get a Windows 7 Install done on a Carbon X1 2016 20FB w/ Samsung950 Pro. Bios 1.14 (latest as of May 2016)Special issue is, I need to get it done in a Legacy mode (BIOS,MFT style). I was able to install Win7 based on a win7 image that got the 950pro drivers and the USB3 drivers infused through NTLITE, and then I build an image with Rufus 2.9 (both UEFI/GPT and UEFI/MFT) worked, with the X1 BIOS was set up to UEFI only with CSM.BUT I need to to run on the BIOS setting 'Legacy' and in MFT style, b'cause the special Win7 installer I need to use does not support anything else. I know, sounds weird, but..... . So- is there a fundamental limitation against booting / installing a Win7 on a Carbon X1 2016 20FB - Samsung950 Pro in Legacy 7 MFT mode?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Carbon-X1-2016-20FB-Samsung950-Pro-Windows-7/td-p/3338627
Hi, the power options sets that the display should turn off in X minutes. But it doesn't do it at all. Instead, the computer is locked and the display dimms. I'm pretty sure that I have installed the latest monitor and graphic card driver. For testing it, I have also unplugged all USB devices. What can still be the reason? Thanks!https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Thinkpad-X1-Carbon-2016-20FB-won-t-turn-off-display/td-p/3479770
Hi all, I have the X1 Carbon 2016 (20FB) and it is running Windows 10 Enterprise. I have all the lastest Windows and Lenovo updates. It all works pretty well except when it comes to starting back from sleep mode. I have the laptop configured to go to sleep when I close the lid. However when I reopen the lid, the power button and keyboard lights come on but the display stays off. Opening and closing the several times doesn't help. The only way to get the display to turn on is to quickly press the power button. This puts the laptop to sleep. If I press the power button again the laptop comes back to life and the display works again. Anyone else have this issue? Any possible solutions? Thanks,Ianhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-20FB-display-doesn-t-work-after-opening-the-lid/td-p/3454282
Just got my brand new X1 Carbon (4gen 2016/20FB) with the 512 GB PCIe NVMe SSD (THNSN5512GPU7). Was expecting a blazing fast disk, but it felt sluggish something that AS SSD Benchmark confirms (see attachment). According to the specs this drive should offer up to 2400 Mb/s read and 1500 Mb/s write. But I get 1800 MB/s read and abysmal 113 MB/s write. The machine has all the latest updates from Lenovo (incl BIOS) and all the drivers for Windows 10. Anyone else tested their drives? Found a Dell XPS owner with the same drive that complained about the same issue. Turning off windows write cache buffer flushing does help, but that is not a good answer.
as-ssd-bench NVMe THNSN5512GP 08.08.2016 10.41.20.png ?31 KB
Hi, I updated my X1 Carbon 4th gen to 1.17 BIOS, and since then, opening the lid won't wake the computer from hibernation, except when plugged.Bios changelog states Disabled the power button when the computer is in battery mode and the
computer lid is closedbut when I read "power button", I don't think "this is gonna break the behavior of the lid". And of course, no rollback is possible from 1.17, so I'm stuck with a computer wich won't wake from hibernation correctly. I just can advise you all to not upgrade bios, and see what's inside the next version...
I set the trackpoint speed in the mouse pointer options in control panel nbsp to max speed and then I also set the trackpoint to max speed in the synaptics specific driver nbsp nbsp This is great the mouse is really responsive and i can scroll quickly and move the mouse from the left side to the right with very little pressure nbsp nbsp Recently though I have noticed that the trackpoint nbsp has about halved in responsiveness and to move at full speed i have to apply maximum pressure against the trackpoint nbsp nbsp This is making my finger quite sore and is extremely annoying even my old t and trackpoint 4 less Lenovo resp... Gen (20FB) became X1 T have way better trackpoint responsiveness nbsp nbsp I've tried reinstalling the trackpoint driver but no luck nbsp I noticed that there seems to be a fairly recent trackpoint driver update Lenovo X1 Gen 4 (20FB) trackpoint became less resp... and was wondering if that was the problem nbsp nbsp But lenovo do not publish the Lenovo X1 Gen 4 (20FB) trackpoint became less resp... older drivers like they used to nbsp nbsp nbsp How do I fix this I'm not even certain whether it is a software issue or hardware nbsphttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Gen-4-20FB-trackpoint-became-less-responsive/td-p/3380491
Lenovo Gen 4(20FC) Carbon loses audio after Lenovo System Update We have several of the Gen 4 X1 Carbons here at work and they work fine until Lenovo system updates gets run. We have had 4 people run the system updates and now the system has no audio. If you click the audio icon in the try, windows begins diagnosing the system. If you try to install a different driver, it fails with code 1. No matter if you uninstall, reinstall, different versions of the driver....nothing seems to restore the audio. I finally did a system restore to before lenovo system update was run and the audio returned to working. It seems to be a software problem but I would really like to know if there is some way to get it working without having to restore every time someone runs lenovo system update.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-Gen-4-20FC-Carbon-loses-audio-after-Lenovo-System-Update/td-p/3372423
Hello nbsp I've got my Carbon X Model) endless Carbon X1 bootloop (2014 yesterday but today when I woke up and wanted to switch it on again the Carbon X won't boot The lights of the keyboard and adaptive keys plus the powerbutton are flashing in white and green for one second After that the laptop turns off an tries to boot again after - seconds Also the fans X1 Carbon (2014 Model) endless bootloop are working and the AC-Cable is X1 Carbon (2014 Model) endless bootloop connected nbsp I've tried following Reset the Laptop with a paperclip -- gt boot again with AC plugged inReset the Laptop --- gt without AC plugged inHold reset-knob for sec sec sec and even longer -- gt hold down the powerbutton for sec sec sec or longerIt didnt't fix the Problem yet I've read in the forums that there is a BIOS update which solves the Problem but when the laptop doensn't boot I can't install the update nbsp Do you know how I could fix X1 Carbon (2014 Model) endless bootloop this problem nbsp Nice regards nbsp F Martin
I bought my X1 Carbon Touch 2014 brand new about 2 months ago.Today was a normal day, I set it to sleep before leaving work and came home. A few hours later, I pulled my laptop out and connected AC and pressed the power button. It woke up normally into the login screen so I swiped my finger to login and 1~2 seconds after, the screen suddenly turns funny and then shows black screen (I think it powred off or something at this point). And then it turns on (but not the screen) briefly for about 1 second and then turns off, turns on for 1 second and turns off, and repeat... I tried the reset button and it made it stop the loop. But then whenever I try to power it on it starts that loop again and I have to use the reset button to power it off (holding the power button will not stop the loop). Also, pressing the reset button does not stop the loop when the laptop is plugged into AC.. I have work tomorrow and this is my work laptop.... Any ideas of what's wrong??This is so disappointing. It will be a huge headache if I have to send this in to Depot as our company policy requires the SDD to be wiped before sending it in for repair. UPDATE:Seems like I'm doomed now. After leaving it for a while I powered it on and it powered up normally and went to boot screen. I chose to normally boot up window but then screen turned blank again... After that, trying to power it up will again enter that power on/off loop. So I reset it again and left it for a while. Then powered it on again and it shows the boot screen normally. I chose Safe Mode this time and it asked for the bit locker key because the system was not turned off normally. While I was looking for the key in my other computer, the screen suddenly turned funny again (lots of red dots and stuff). Keyboard was unresponsive and soon after it went into the power on/off loop again..https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2014-Model-endless-bootloop/td-p/1554308
Hi All I have just updated the Bios on my 2016 Lenovo X1 Carbon and now the splash screen which normally shows Lenovo in all black with white text has now got a RED box around the Lenovo text. Anyone else have this? Type: 20FB-003TUK (6th Gen) Regards Stu
Yeah, it change with a new logo.u can check the change log (New) Updated the logo screen at start up.support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-X-Series-laptops/ThinkPad-X1-Carbon-... I'm a ThinkPad fans, and a Chinese Lenovo employee. My English is not good. That's all.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-2016/td-p/3323665
I have been buying X1 carbons since gen 1 and I just recieved 5 Gen 4 carbons. We image all our X1's prior to deployment and I am disapointed that they are no longer including the eithernet dongle with the laptop and they changed the port to the a new onelink plus so none of my old dongles will work. I have a couple of lenovo USB dongles that I use to use to image the gen 1 X1 carbons. I am tying to use the usb dongle but it doesn't get regconized by the bios. Any ideas? I have orderned the a new onelink plus adapter but they are back ordered everywhere and I have 5 X1's I need to get imaged. Thanks,https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Gen-4-X1-carbon-does-t-reconize-the-lenovo-USB-eithernet-dongle/td-p/3323878
Hello everybody, is there anybody that has upgraded his 3rd Gen X1 Carbon to a 1TB ssd? I'm running out of place and would like to have a bigger ssd and do not know which one I could use. I tried reading in the forums, but was not able to find out which SSD would work. Somehow NVMe is not supported, it has to be a PCIe SSD (I think), but I'm not too familiar with these things. I looked at the new Samsung SM961 1TB that is just coming out, would that be able to work?The specs are here: https://gzhls.at/blob/ldb/c/4/4/9/618ff48c1c0dc799c9442fd598fa06935527.pdf Any help would be deeply appreciated.Regards,Jochenhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-Thinkpad-Carbon-X1-3rd-Gen-1TB-possible/td-p/3457444
Hey, I saw that intel has made a m.2 ssd with size of 1TB name of it is Intel 540 M.2 SSD 1TB so i wanna know will this ssd even work on the x1 carbon 3rd gen 20BS??? /Thankshttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/lenovo-x1-carbon-3rd-gen-20BS-1TB-M-2-SSD/td-p/3319959
Hi, I bought my laptop with windows 7 pro , later i requested for windows 10 pro recovery and lenovo sent to me a 16GB USB recovery drive containing windows 10 pro version. Problem i am facing it i can not boot my laptop from this USB. As i checked there are window 10 pro files in USB but i can not see an iso image in the USB , and when i go to my system bios option make usb as first bootable device then boot the system it do not recognize that a bootable usb exits or boots from it. Kindly supportSnapshot of files in USB is attached
snapshot.JPG ?80 KB
Boot into the BIOS. Hit F9 to reset defaults. Then, under startup, change to UEFI only. Reboot. Hit enter when you see tha splash screen, then F12. Boot foom USB.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-3rd-gen-not-booting-from-the-Windows10-16GB-USB/td-p/3470149
My laptop is Lenovo Thinkpad x1 Carbon. Almost everyday my laptop falls to bluescreen and reset itself. I have attached my dump files and my bluescreen image.
Before i tried to update my ssd firmware but i couldn't be success.
CPU : Intel Core i5 - 3427U
8 GB Memory
I am looking forward your answer and comments
Your logs are not complete. Please download and run the attached file. Once finished attach the new files.http://www.eightforums.com/bsod-crashes-debugging/40397-lenovo-thnikpad-x1-carbon-dpc_watchdog_violation.html
my Lenovo X1 Carbon lost Wifi connection and no wireless adapter is showing up in deviec manager or under network adapters. running windows 10. How do it get back to wifi?
Download and Reinstall the drivers from here: WLAN Windows 10 64 Bit DriverWLAN Windows 10 32 Bit Driver: To determine which version of Windows 10 you have:Click "Start" > type in "Machine Name" a dialog box will pop up and under System Type will tell you whether you have 32 bit or 64 bit edition of Windows installed. Good luck.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-carbon-Wifi-connection-gone/td-p/3301557
my fan is always slowly spinning when i am doing nothing (cpu usage is around 5%, cpu and system temperature around 50 degrees) it is TOO NOISY !!, is there a way to lower my fan speed so it makes no audible noise or move the optimal cpu temperature from 50 up to 60 or 70 degrees so my fan speed is lowered (and eventually stops) when i am idling ?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/lenovo-x1-carbon-fan-always-spinning-even-at-idle/td-p/3460915
Need help to escalate the issue to Lenovo. I am really unhappy with the product and service. I have a new laptop which i purchased with all my savings and as soon as it arrived it is making noise. I have raised 4 tickets and 2 fan repairs happened by Lenovo support but nothing has helped to solve the issue. The fan noise is so huge at times that i feel like i am sitting in an AIRPLANE. I dont know how can i receive the right help to sort this issue for me. I will be travelling soon and if it is not resolved i will be really unhappy.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-FAN-noise-Unbearable/td-p/3484574
Dear Forum Support nbsp Recently I have had issue with my Function key at the bottom left of not Lenovo Function X1 Key 3rd Carbon toggling... Gen my keyboard The Function Keys do work correctly its just this bottom left corner key Fn which cannot allow me to toggle between special function and regular function key nbsp In order to use the regular function key i have to go to Keyboard Function Key switch to regular and restart the computer nbsp I recently did some change to my computer to improve gaming experience update all drivers update to windows remove all windows things system- gt Performance- gt Settings- gt for best performance I also use my battery for best performance and my video card intel Lenovo X1 Carbon 3rd Gen Function Key not toggling... hd nbsp Nothing that should impact the Fn key except maybe the driver update for the keyboard Lenovo X1 Carbon 3rd Gen Function Key not toggling... I actually do not know if I had to do a driver update specifically for the keyboard after the windows update nbsp I do have to use the Fn key regularly for Excel and for gaming But still Lenovo X1 Carbon 3rd Gen Function Key not toggling... less than many other keys WASD or or shift ctrl tab nbsp My question is nbsp I cannot do a hardware scan so how can i confirm that this specific key is not working properly or that something is blocking its use instead nbsp Is there any way to block this key activate or deactivate that I might have done by mistake for example pressing it for more than seconds or pressing it times in a row etc nbsp Looking forward to your help and attention nbsp Best Tedhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-3rd-Gen-Function-Key-not-toggling-nor-Locking/td-p/3439887
Hello! I have bought lenovo x1 carbon (first generation).Suddenly I found out, that its keyboard does not support detection of even TWO keys pressed simulanteneously. For example, key combinations: s+x, d+c, f+v, j+n cause "beep" sound. It seems really strange for me.. Usually keyboards support at least 3 keys pressed at the same time...Is it normal for x1 carbon, or the problem is with my notebook? Thanks!https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/lenovo-x1-carbon-keyboard-does-it-support-only-2-key-rollover/td-p/3399092
I have a Lenovo X1 Carbon and I was considering either purchasing the Thinkpad Onelink Pro Dock or the Thinkpad One Link Dock. I need to be able to connect a monitor and keyboard to my new computer. I have a some questions that I was hoping someone can help with. 1. What is the difference between the Pro Dock and the Regular Dock? 2. If my monitor does not have HDMI will these two docking stations still allow me to connect a monitor? 3. Can you connect two monitors with both the pro dock and regular dock stations? 4. Are there other docking station options that are better? 5. Do these docking stations work with all versions of the x1 carbon? Your help is greatly appreciated. Thank you.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Best-Lenovo-Thinkpad-X1-Carbon-Docking-Station-Options/td-p/3318100
Hi there Last week, my laptop (Windows 10 x64) crashed into a bluescreen ("SYSTEM THREAD EXCEPTION NOT HANDLED"). I googled the error and tried several fixes. The bluescreen does not occur anymore but the computer always freezes after several minutes and gets stuck in a boot loop. The strange thing is that when I unplug the battery, the laptop runs without any problems, but only with the one link (and not with the regular charging cable). Do you have any idea what the problem might be? Thanks in advance!Best,groovihttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-freezes-Type-20A8/td-p/3431577
Hi, I've had my x1 carbon for a while nowand my adaptive keyboard just stopped responding out of the blue. I'm running 64 bit Windows 8.1 Pro.I've downloaded all the necessary drivers but still hadn't fixed anything.I'd really appreciate it someone had a solution to this. It's really inconvenient for me because this laptop is my dailer driver. Thanks in advancedhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-x1-Carbon-Adaptive-Keyboard-not-responding/td-p/3341616
i'm trying to turn on TPM via a task sequence set whilst building the machine via SCCM 2012
I have included the following cmd as a step in the task sequence:
cscript.exe SetConfig.vbs SecurityChip Active
then use a 2nd step in the task sequence to enable bit locker encryption and use TPM.
Now step 2 works fine as we have used this on our previous HP laptops, but it will not work on the lenovo's Am i missing something in the first step of the task sequence?
Moderator comment: Detail added to subject for clarity. Model clarified per previous posts.
Hi everyone, I have a problem with my Lenovo Companion App, all the windows still blank (like this: https://drive.google.com/file/d/0B5E-i-EaT4w6MFZSUmRyN3JhS1E/view ) I don't know if I uninstalled someting wrong (Thinkpad Settings Dependency and Hotkeys installed). I uninstalled Companion and installed back from the Windows Store but it still blank. All drivers and software up to date with the Lenovo System Update tools. Thank's in advance Flavienhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-Companion-is-empty-Carbon-G4-20FC/td-p/3310564
Display issue in Lenovo X1 CarbonDisplay non touch. Native resolution 2560x1440 on ci7 8GB 256GB SSD.When I wake the laptop from sleep/power on/restart it keeps happening for around 5 -10 mins then screen goes to normal.Sometimes screen stays dark but when I move the screen to and fro at different angles at some point display starts working.Though on external display it works fine.Now I would like to ask if any one who has the Idea that? 1. Is it a BAD/loose connection between display cable & mother board or between cable and back side of LCD panel?2. Is it a bad cable itself?3. Is it an issue of faulty LCD panel? or 4. Is it a bad motherboard? Please watch the video for exact issue.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Display-issue-in-Lenovo-X1-Carbon-Though-working-on-external/td-p/3367883
Hi, I have a Lenovo X1 Carbon running Windows 10. I would like to connect an external monitor and my only option seems to be using the HDMI port and using a HDMI to VGA cable. I plug this into a Philips 24" ext monitor and nothing I try can get me to
duplicate or extend my display. I just get a message on the ext monitor of "Check Cable Connection". New cable, and new laptop.
How can I even check, if the HDMI port is enabled or is there some other hidden switch / setting / feature I need to turn on first. I have tried the display settings and 'Detect' but nothing.
Any thoughts please.
Display issue in Lenovo X1 CarbonDisplay non touch. Native resolution 2560x1440 on ci7 8GB 256GB SSD.When I wake the laptop from sleep/power on/restart it keeps happening for around 5 -10 mins then screen goes to normal.Sometimes screen stays dark but when I move the screen to and fro at different angles at some point display starts working.Though on external display it works fine.Now I would like to ask if any one who has the Idea that? 1. Is it a BAD/loose connection between display cable & mother board or between cable and back side of LCD panel?2. Is it a bad cable itself?3. Is it an issue of faulty LCD panel? or 4. Is it a bad motherboard? Please watch the video for exact issue.
Lenovo-X1.jpg ?35 KB
Dear community nbsp I have this rather special issue that I would like to ask for your assistance with nbsp The case I have a Lenovo X Carbon nd generation A running Windows x One day the touchpad touchpad not Carbon responding 20A7 2nd X1 Lenovo stopped working but initially by making the cursor jump around the screen when I used the touchpad and later with no response Lenovo X1 Carbon 2nd 20A7 touchpad not responding at all Currently neither the touchpad or the trackpoint nbsp work and nbsp only when combining all of my effort and luck nbsp emphasis on the latter I can get a response For instance I recently had luck nbsp reinstalling the UltraNav driver nbsp which made the touchpad respond though rather nbsp patchy but only until nbsp I restarted the computer nbsp The background I bought the nbsp laptop while living the United States but have since moved to Denmark where I cannot use what remains of my warranty I tried calling the Lenovo callcenter and an employee suggested that I enabled the nbsp touchpad in the nbsp BIOS and reinstalled the driver but nbsp when that did not work he fell short on advice It seems that those guys are primarily there to help old people create a password and what not nbsp The twist I am aware that one excellent possible solution to my issue is that I can do a clean install of Windows on my device However I currently have a limited use version of some very expensive software installed and I need that in my daily work and cannot get a new version right away so doing that would set me back quite a lot nbsp I would really appreciate if somebody knows anything about what I could possible do in my situation I will try to respond as quickly as possible and am willing to engage in quite complex trouble shooting nbsp Faithfully CThyssen
Hello and welcome,
It seems that you're leaning toward a software rather than a hardware problem. You might try booting a live Linux USB flash drive to verify that the hardware works.
It's typical for ThinkPads to have international warrantees. Have you verified your specific coverage? SUPPORT above, then International Services in the Warranty and Repair drop-down.
If your machine is eligible for local warranty service they will probably reinstall the OS as a diagnostic - and possible repair - effort. If you can isolate to a hardware issue as suggested above you might avoid that step.
troubles started only after the upgrade to Windows 10 and I frankly tried to ignore the 1-2 BSOD's per day as I'm working 10h+ and still with deadlines in tow.
Lately the BSOD's hit more often and from different reasons: Kernel Security Check Failure, IRQL not less or equal, Memory Management...
I already ran all kinds of hardware tests, everything seems to be fine.
Please note that the SysnativeFileCollection is a .rar inside a .zip as the file was too big.
Hello, Firstly, i am sorry but i don't speak english very well. Secondly, i just bought an external bluray reader which reads bluray thanks to the Cyberlink PowerDVD Application. Nevertheless, when i try to read a bluray, it doesn't work. So, i launched the Cyberlink bd advisor and it is written there is a problem with my laptop graphic card. The laptop is a thinkpad x carbon 4th gen and the graphic card is an intel hd graphic 520. So, i tried to reinstall the drivers after having retrieved them from the intel website. Nevertheless, i get an error message : "you should contact the computer constructor in order to update your drivers". Then, i went to the lonovo x carbon 4th gen driver's page in order to get the good drivers. However, it doesn't change something... So, i come here to ask you some help.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Cannot-read-bluray-on-lenovo-thinkpad-x-carbon-4th-gen/td-p/3448927
I have Lenovo X1 Carbon.Few days ago I've updated it till Windows 10. And after that my cellular became not work. Mobile Network - empty Cannot setup mobile hot-spot In network connection - Cellular not connectedIn diagnostics it cannot connect to my providerBut I check SIM card on phone - it works well. Also I've try to update driver (Ericsson N5321gw Mobile Broadband Firmware for Windows 10 (32-bit, 64-bit), 8.1 (32-bit, 64-bit), 7 ...), but it not help Please, can any one tall what to do?
HiCheck out modem fw version and perform its upgrade:http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-...https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-Windows-10-Cellular-not-working/td-p/2140427
Hello. This Lenovo X1 Carbon (2014) screen starts randomly flickering when traveling in trains and running on battery. We already ran all system updates and it happens less often, know but it happens. Here is a video of how it looks like:http://youtu.be/STq8qnjKYk0 Is there any solution available? Cheers,Marcel
Go to Solution.
Welcome to Lenovo Community!
As per your query we understood that you are facing issue with LCD flickering on ThinkPad X1 Carbon.
Please let us know have you checked it with booting the system into safe mode.
Check with connecting the system to External Monitor if the flicker occurs in that also.
Check with updating graphic driver and chipset application.
Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
Hope this helps!
Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
Hi All So im looking to build my new X1 carbon with Windows 10 Enterprise 64bit, i have the iso on a bootable USB pen, but i cannot get the system to boot from the usb with secure boot on. I would like to take advantage of the UEFI boot, i can turn off the secure boot and it will build as normal, but after installing all the drivers, i put UEFI secure back on and it wont do anything. Am i missing something here? Regards Stuhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-2016-Windows-10-Build/td-p/3323674
Hi all lenovo users,I am using lenovo x1 carbon for last one month. So far i am very satisfied with my device. I am not finding mobile networks (3g/4g) though it supports it. Does anyone have any idea about it.
Not all X1 Carbons have WWAN; many were WWAN ready, with the antennas and SIM card slot fitted but no WWAN card. You need a machine with a WWAN card and a suitable SIM for WWAN to work.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-Thinkpad-X1-carbon-3rd-gen-cellular-network-3g-4g-issue/td-p/3395983
Hi all lenovo users,I am using lenovo x1 carbon for last one month. So far i am very satisfied with my device. I am not finding mobile networks (3g/4g) though it supports it. Does anyone have any idea about it.https://forums.lenovo.com/t5/ThinkPad-Chromebooks-11e-X-and/Lenovo-Thinkpad-X1-carbon-3rd-gen-cellular-network-3g-4g-issue/td-p/3395983
Hi, My setup is a Carbon X1 4th gen and a LENOVO ThinkPad OneLink + Dock. I want to buy two monitors to connect to my dock's Display Ports, what is the maximum resolution that I can get out of them? Regards,https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/LENOVO-ThinkPad-OneLink-Dock-and-Carbon-x1-4th-gen/td-p/3441349
The problem is with the first line of keyboard. Functions such as "Alt + F4" do not work. The microphone LED does not light, nor can disable the Wifi from the keyboard or open the multitasking or busquedad from the function keys.I updated the keyboard driver to the most recent but nothing, still does not work. Somebody could help me?sorry for my English, I'm not from USA. ?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Problem-with-keyboard-lenovo-x1-carbon-20BS/td-p/3355908
Hello nbsp I'm facing a problem with my lenovo pro m display and carbon x R FWLB on windows bit The specifications of both devices are saying that they are capable of showing a resolution of x Lenovo & (2015) (4K) Carbon Display X1 Pro2840m at hz Nevertheless its not working Here the steps I tried nbsp - Using the mDP Port directly from the laptop - not the DP port of the dock- Buying a new mDP - gt DP cable which is able to display K at hz tested in another environment - Enabled DP in monitor settings- Installed last version of intel chipset driver- Installed last version of intel graphic chip driver- Restarted monitor and laptop several times- Factory reset the monitor- Downloaded and installed drivers for the display- There is no other display connected and the laptop is shut The m is the only device which is in use nbsp After all these steps I'm still only getting hz nbsp nbsp This are the urls to the device-support pages X Carbon Support PageThinkVision Support Page nbsp I have no ideas what to try next but working - hrs a day with hz hurts my eyes Any ideas nbsp nbsp nbsphttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Carbon-X1-2015-amp-Lenovo-Pro2840m-Display-4K/td-p/3375505
I tried to power cycle it, and reset battery by using a paper clip on small button under the laptop but does not power on. It just keeps blinking, and the ac port on the laptop blinks orange as well.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-not-powering-on-and-power-button-blinks/td-p/3475475
Hello, I have a Lenovo thinkpad x1 Carbon 4Gen with Windows 10. When I connect to internet with my sim card to the mobile broadband network, my screen is blinking (screen getting on and black several time). The connection is good but it blinks time to time. It happens even when I am already connected and while doing stuff online. Thanks for your help. Joelhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-carbon-x1-Gen4-Windows-10-Mobile-Broadband-issue-Screen/td-p/3319645
I've been using a Macbook Pro 15" for years, with Win7 Ultimate installed. Naturally I have everything just so.. It died a few days ago. I figured it was the SSD, but it was the mainboard or something.
I now have a new Lenovo X1 Carbon, and the SSD from the MacBook Pro is in an ext. USB enclosure. How would the experts recommend that I image the old installation onto the new laptop?
I found this article (Restore Windows 7 to different computer ) but it requires the old computer to be working.
(Please keep in mind the X1 doesn't have an optical drive -- I will have to create a bootable USB key for this process.. Or perhaps it's possible to boot off of the external HD -- I'll check the BIOS)
Thanks in advance..
Do you have a system image for the original MacBook Windows 7 installation?
Hi, Lenovo Solution Center reports the following hardware problem on my new X1 Carbon (4th Gen).I've also tried the Lenovo Diagnostics tool for PCI express, as indicated in the forums, which reports the same error. Anybody an idea how serious this is? Resource type:
Samsung Electronics Co Ltd
Mass storage controller
Non-Volatile memory controller
1/04/2016 18:57:13 - Status Test
1/04/2016 18:57:13 - Warning Fatal Error Detected in PCI device present on Bus: 0x5 Device: 0x0 Function: 0x0.
Go to Solution.
This is my machine type: 20FBCTO1WWAll software is up to date using the Lenovo System Update tool.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/PCI-Express-hardware-test-fails-Lenovo-X1-Carbon/td-p/3298363
I have a two week old Lenovo 6. X1 Random Manager Lenovo Sleep... and Power Carbon X Carbon A and from the beginning after simply got Windows initial setup with nothing else on I noted that if I left it to go in sleep or Hibernate when the lid was closed upon opening it again the notebook screen was X1 Carbon and Lenovo Power Manager 6. Random Sleep... black although the adaptive keyboard was active and the machine was pingable from the network nbsp No matter what I did I could not get the unit to come back to life so I always had to press the power button until it power cycled to get X1 Carbon and Lenovo Power Manager 6. Random Sleep... it back nbsp I noted that I was not alone out there and some reported the issue on earlier X 's nbsp Support suggested to send it back and were not helping much They decided it is either hardware or configuration issue and in both cases it required a nbsp return nbsp nbsp Because the issue was reported in the forums on earlier X 's I decided that it was probably software and I started by disabling all sleep modes only to find out it would still go to sleep This is how I found out that if the sleep mode was disabled in Power Manager it would automatically enable in Windows version of the power manager Disable it in Windows and it would enable in Power manager yeah - exactly I had the same reaction nbsp Same thing with other power functions nbsp So I de-installed Power Manager and bingo no more issues But now I get non critical nbsp warnings nbsp in Lenovo tools that I have no power manager software installed Plus I don't get the extra features that are useful in PM nbsp Did anyone experience the same if so can you also try uninstalling Power Manager and see if the issue goes away in which case we should pursue Lenovo to rectify it nbsp Thanks nbsp
Can you please tell me exactly the steps to reproduce this?
1. Leave system idle with lid open (is AC attached or not?)
2. System automatically enters sleep mode after XXX minutes
3. Close the lid
4. Open the lid
5. Screen stays black?
Or is it something else?
Hello nbsp I have deployed laptops with the model of BT X carbon laptops nbsp in corporate enviroment The Lenovo X Carbon is randomly causing BSOD when using the wireless connection after undock The wireless driver that I have installed on the laptop is the version from Lenovo WCCM driver package I noticed the BSOD is a bug in which is resolved in the version However nbsp i am unable to upgrade to the nbsp latest version nbsp I can download the update from both Lenovo website or system update or even Intel driver support site but none of it upgrade the driver Any idea nbsp nbsp From release note - fix nbsp lt gt nz w w - New Added support for Wireless Lenovo - BSOD Random Carbon 20BT X1 - Dri... the following systems ThinkPad L Thinkpad P P s Machine types FK FL P ThinkPad S Thinkpad T ThinkPad T Machine types FH FJ ThinkPad X Carbon Machine types FB FC ThinkPad X Tablet Machine types Lenovo X1 20BT Carbon - Random BSOD - Wireless Dri... GG GH ThinkPad X Yoga Machine types FQ FR Thinkpad X ThinkPad Yoga - New Improved driver stability - Fix Fixed an issue where WiFi might not function correctly after connectedstandby - Fix Fixed an issue where blue screen might happen at the certain Lenovo X1 20BT Carbon - Random BSOD - Wireless Dri... case nbsp nbsp WhoCrashed Minidump diagnostic System Information local Computer name X -T- -LOANER Windows version Windows Service Pack build Windows dir C WindowsHardware BTS YJ LENOVOCPU GenuineIntel Intel R Core TM i - U CPU GHz Intel level logical processors active mask RAM bytes totalCrash Dump AnalysisCrash dump directory C Windows MinidumpCrash dumps are enabled on your computer On Wed GMT your computer crashedcrash dump file C Windows Minidump - - dmpThis was probably caused by the following module netwsw sys Netwsw x Bugcheck code x E xFFFFFFFFC xFFFFF D xFFFFF A xFFFFF CE Error SYSTEM THREAD EXCEPTION NOT HANDLED Mfile path C Windows system drivers netwsw sysproduct Intel Wireless WiFi Link Adaptercompany Intel Corporationdescription Intel Wireless WiFi Link DriverBug check description This indicates that a system thread generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem A third party driver was identified as the probable root cause of this system error It is suggested you look for an update for the following driver netwsw sys Intel Wireless WiFi Link Driver Intel Corporation Google query Intel Corporation SYSTEM THREAD EXCEPTION NOT HANDLED MOn Wed GMT your computer crashedcrash dump file C Windows Minidump - - dmpThis was probably caused by the following module ndis sys ndis x D Bugcheck code xD x CFD x x xFFFFF AB D Error DRIVER IRQL NOT LESS OR EQUALfile path C Windows system drivers ndis sysproduct Microsoft Windows Operating Systemcompany Microsoft Corporationdescription NDIS driverBug check description This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system that cannot be identified at this time On Wed GMT your computer crashedcrash dump file C Windows Minidump - - dmpThis was probably caused by the following module ndis sys ndis x FB Bugcheck code x E xFFFFFFFFC xFFFFF A D FB xFFFFF A B xFFFFF A Error SYSTEM THREAD EXCEPTION NOT HANDLED Mfile path C Windows system drivers ndis sysproduct Microsoft Windows Operating Systemcompany Microsoft Corporationdescription NDIS driverBug check description This indicates that a system thread generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system con... Read more
same problem reported else where for Wireless-AC 7265 BSOD Error Win7 x64 https://communities.intel.com/thread/97407?tstart=0https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-20BT-Carbon-Random-BSOD-Wireless-Driver-18-2-Unable-to/td-p/3311883
Hello, I want to know whether Huawei ME906C LTE module work with Lenovo X1 Carbon Gen 2, i'm currently using Sierra Airprime EM7345 module. Please kindly help. Thanks in advance.
I am a new member of this forum. I have a Lenovo 1200-CTO. I cant find any reference to this model no. Ideas?
Hello and welcome,
Both The Google and Lenovo Support's search by MT-M feature think that is a ThinkPad Edge E525. Does that seem reasonable?
Here's the support page: http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5...
You should be able to confirm the model - and perhaps the specs - by using the parts lookup page. Enter your serial number there - BUT DON'T POST IT HERE IN THE FORUM. https://support.lenovo.com/us/en/partslookup?linkTrack=MastubNavupportroduct%20Supportarts|Parts%20L...
BTW, the "CTO" part of the MT-M indicates it was a "configure to order" machine so some of the specs may vary within the "1200" model range.
 Once you've confirmed your model, we'll move this thread to the proper forum.
Is TPM Supported on Lenovo g50-45 model?
i believe the answer is no. It is not an option.
hello everybody i am having another problem with my windows updates! it says that i never updated windows, i have had the Lenovo pc for a little bit more than a year. so the problem is when i try manually updating windows, one or a couple of programs download, and the others are stuck!! i used lenovo solution center program from my desktop and i always thought that the computer updated automatically!
also, from lenovo updates program on my desktop, i get an error message! it says network problem and it does not do anything. theres another message though saying that updates were made on the 2015-06-26
Hello,Could you tell me how to resolve this issue on a lenovo Model: L540when the touch pad is activated, the mouse trembleI tested off the touch pad and leaving the mouse with file and no problemthank you. sorry for the mistakes I speak Frenchhttps://forums.lenovo.com/t5/Lenovo-A-B-C-N-S-Flex-Horizon/lenovo-Model-L540/td-p/3384717
I am new to this Tech Support but heard lot about it. We have a lot of IBM Lenovo M55 model PC's which restarts while working on it. In the event log the error message i see is ...
The following boot-start or system-start driver(s) failed to load:
any help is highly appreciated
Hi and Welcome to TSF!
On your IBM computers are they running Norton Internet Security?
Hello For a Lenovo B590, Model number 59410449, which has the i5 processor, what is the maximum amount of memory that is supported? Mine shipped with 6 GB. I'm worried that if the max is 8GB, I will have to buy two 4GB memory sticks. Does anyone know what the maximum for this model number is? Am hoping it is 16 GB! Thanks.https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Memory-for-Lenovo-Model-59410449/td-p/3330016
Does Lenovo IdeaPad 700 15.6" black model have JBL speakers?Why IdeaPad 700 15.6" black model doesn't show JBL band but white model does it?pictures : - JBL label on white model - JBL label on white model 2 - No JBL label on black model - No JBL label on black model 2Thank you.
Go to Solution.
Hi wicharit ,
Welcome to the Community Forums.
Checking on shop.lenovo.com ( noticed the photo seems not showing the JBL logo)
Better way ( view models tab ) getting a machine number to verify parts listed on that model (ex. 80RU00APUS )
Based on parts lookup page: JBL speakers available , upper case JBL cover mark
Part number : 5SB0K85910 Speaker W 80RU R+L NJBL SPEAKERS INTERNAL
Part number : 5CB0L03571 UpperCaseW80RU BK BLNJBL W/KB USA COVERS
Pulled up a different page for a black and red topcover and it showed red JBL logo just above the keyboard (price a little different from the first)
It may be a top cover design that may show of a different part number but basically checking on the parts lookup page using the machine number is technically preferred for verification.
Hope this helps.
i bought a new ram for this notebook (because is really slow with 4gb RAM) and for my surprise is not compatible. bought a CRUCIAL memory 8gb RAM DDR3L 1600 (should be compatible) but the notebook doesn´t boot up. can anyone give me a list of rams that work on this really bad notebook? p.d: i have only 1 bay for ramhttps://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-G40-30-Model-name-80FY-ram-problem/td-p/3396400
I have a G 50-70 , Model - 20351 laptop.It has an Intel Core i3 4010u 1.7Ghz processor runs on a Lancer 5A2 motherboard. Can i upgrade the cpu with more clock speed of same specification , like i5 4210u?https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/CPU-Upgrade-Lenovo-G-50-70-Model-20351/td-p/3382501
Hello everyone,does soemone know, if I am able to install the following RAM (2x16GB) http://www.crucial.com/usa/en/ct2kit204864bf160binside my Lenovo Y50-70 Model 20378? best regardsIngohttps://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Lenovo-Y50-70-Model-20378-32GB-RAM/td-p/3382995
Anyone knows where I can purchase a battery replacemnet for Lenovo Y40-80 Model:80FA0018US Battery :4-cell (48 Wh) Power Adapter 90WI tried looking on lenovos website based on lenovo's reps suggestions on this fourm. I only found batteries for Y40-70 and not Y40-80 ? is there a difference when it comes to batteries for these two laptops? Thanks.https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Battery-replacemnet-for-Lenovo-Y40-80-model-80FA0018US/td-p/3461022
For a Lenovo B590, Model number 59410449, which has the i5 processor, what is the maximum amount of memory that is supported?
Mine shipped with 6 GB. I'm worried that if the max is 8GB, I will have to buy two 4GB memory sticks.
Does anyone know what the maximum for this model number is? Am hoping it is 16 GB!
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
Hi AC2000 ,
Welcome to the Community Forums.
Based on the product specification for this model , memory :
8GB max7 / PC3-12800 1600MHz DDR3, non-parity, two 204-pin SO-DIMM sockets; * System automatically clocks down for processors with 1333MHz memory controller
This is the recommended Max memory supported for your model eventhou some processors can handle more (example : 15- 4310U handling 16 GB) since certain consideration are maintained by the systemboard and BIOS for full functionality and avoid non essential upgrades for users.
Your 6 GB ram probably have 2GB and 4 GB (PC3-12800 1600MHz DDR3) at the moment so you can simply match the a similar 4GB to max it to 8GB and be able to use dual channel synch for faster communication and transfer.
Hope this helped answer your query.
Update us what works best for you.
I am having issues with my new month old nbsp laptop running win nbsp I have tried to lodge a support call but the support form mail doesnt work submit button just goes grey nbsp I asked for a return call days ago noone from support called back nbsp nbsp nbsp Now posting here hoping someone from support can help nbsp Going to sleep I almost always find when I have put the computer to sleep that the screen is off the laptop is sle... Lenovo up T460s crashes and Model wakes from super-hot and the fan is running This happens even if I manually select sleep Waking up I ll open the lid screen and nothing Model Lenovo T460s wakes up and crashes from sle... will happen I press the button the right and nothing happens of the time So I depress it Model Lenovo T460s wakes up and crashes from sle... for minutes and the fan stops the keyboard lights up and it boots up asking to boot in safe mode Other times when it does wake it can take some time for applications to start responding Talking minutes not seconds I have docking stations one at home one at office nbsp Sometime the screen will not display nbsp the one connected to the docking station Sometimes it does but the keyboard won t respond I ll type on the laptop keyboard and suddenly the screen will work or the other keyboard will work There is no pattern except that times in the thing does not work as it should I am very careful putting the computer in the station I prefer to do so when the laptop is off While it lights up on both docking stations pressing it has no effect at all on the laptop It is as if the laptop does not know that the docking station is there Can support please helphttps://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Model-Lenovo-T460s-wakes-up-and-crashes-from-sleep-fan-noise/td-p/3364390
Hi - I am having issues updating to Windows 10. Once I get through the download and start the install I am taken to screen that ask for keyboard layout.
I select US and then hit a screen that wants me to choose between Troubleshoot PC or Shut down PC.
Not sure what is happening here but the update is failing at least 6 times a day on its own.
Any information is greatly appreciated.
For the longest time I couldn't install Windows 10 on my Lenovo S30. The problem was that Windows 10 could not deal with the SCU hard drive port, apparently. Many forums will tell you to open your case and move your hard drive from the blue connector to the red connector. But now there are drivers that will fix the problem. I installed them on Win7 with no problem, and then the upgrade to Win10 proceeded flawlessly.
Intel RSTe SCU/SATA Management Utility for Windows 10 (32-bit 64-bit) - ThinkStation C30, D30, S30 - Lenovo Support (US)
I am trying to deploy an image onto a newer model Lenovo M900 PC. I use a bootable USB to get to diskpart then imagex to deploy the image.
The USB stick containing the .wim image file will not display in diskpart. Its recognized during BIOS boot, however once within the windows command prompt section where you use the diskpart and imagex commands, it won't display or be recognized.
I have a feeling its something to do with this newer model Lenovo having only USB 3.0.. I had to enable USB Virtual KBC Support to get the USB keyboard working in BIOS initially as well, however still no USB memory sticks displaying
You are right about the USB 3 issue. Windows 7 does not have native USB 3 drivers.
Maybe this page will help. Good Luck.
I and trying to find a Service or Repair manual for the Lenovo 15 Model 80K9 so I can replace a broken screen. I have not been able to find a video or a PDF file that shows how to tear down this model so I can replace the screen. Thanks Matthttps://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Service-manual-for-Lenovo-Edge-15-Model-80K9-to-replace-screen/td-p/3384159
Hello everybody, I have acquired as mentioned in the title the Lenovo Yoga 300-11IBR Model 80M1 notebook for taking notes in class.It comes with a pre-installed 500 Gb SSHD. Because of the heat generated by the SSHD inside a no-fan laptop and the always on the move nature of classes I would preffer a more shock-resistant solution like an SSD. I tried changing it with an OCZ Vertex450 128Gb SSD I had in my desktop pc but it was not detected by the system. I have "used google" the last past days but no concrete answer was found. Not really the most popular laptop I guess, or still too new...Can you more tech-savy guys please help me to understand what I am doing wrong and if it is possible to install an SSD in my notebook? Thankshttps://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Lenovo-Yoga-300-11IBR-Model-80M1-SSD-upgrade-not-detected/td-p/3431967
what need setting bioshow can Flash BIOS iso usb pendrive for ThinkCentre M58 M58phttps://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/i-have-lenovo-m58p-7360-model-when-want-ASUS-Radeon-HD-5450-1g/td-p/3379591
Hello model 710-15ISK Lenovo Yoga electrical hiss/b... 710, all nbsp I bought a Lenovo Yoga model - ISK brand new from best Lenovo Yoga 710, model 710-15ISK electrical hiss/b... buy a week ago and I started noticing something super annoying This laptop has the I processor gb SSD gb ram HD and GeForce mx nbsp Outside of the constant hum from the fan my laptop makes a sporadic and intermittent electrical scratching noise or whining sound every time i scroll screen redraws or if I load a program like chrome or word I've heard terms such as coil whine or piezoelectric effect I am not sure but it is quite noticeable and quite annoying nbsp It sounds like this https www youtube com watch v jOgFPlS b s the sound is loudest right in the center of the keyboard at least for me the buzz in the video was provoked by loading software and or scrolling up and down on a page or document nbsp From what i was reading it sounds like it has to do with the CPU and the ACPI driver another possibility is the Intel HD graphics nbsp nbsp Anyone know what is going on or how to fix it Thank you in advancedhttps://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Lenovo-Yoga-710-model-710-15ISK-electrical-hiss-buzz-during-CPU/td-p/3395018
Hello,Could you tell me how to resolve this issue on a lenovo Model: L540when the touch pad is activated, the mouse trembleI tested off the touch pad and leaving the mouse with file and no problemthank you.
sorry for the mistakes I speak French
Mod's Edit: Additional information added to Subject line for clarity of issue.
Hi Lenovo Community, My question is on the subject, I want to install an SSD Disk on my Lenovo B590 model 6274. Is it possible ? Can somebody help me? Thanks for your help Regards.
Welcome to the Forums.
The B590 (6274) does support an SSD and you can opt to get a 2.5" or an mSATA form factor.
- Sample items
- Sample items
Since you already have a HDD, you can try to get an mSATA SSD and make it as your boot drive and just make the HDD a storage drive (i.e., For picture, movies, etc.).
- Sample image
Alternatively, you can just replace the HDD with a 2.5" SSD and optionally get an caddy or a SATA enclosure to convert the HDD as an external drive.
You can refer to this video as a reference:
what need setting bioshow can Flash BIOS iso usb pendrive for ThinkCentre M58 M58phttps://forums.lenovo.com/t5/ThinkPad-11e-Windows-E-and-Edge/i-have-lenovo-m58p-7360-model-when-want-ASUS-Radeon-HD-5450-1g/td-p/3379591
Battery Issue - Lenovo V570 (Laptop) - Battery Model L09S6Y02
First off I for the most part do not use the battery. It is normally detached from the laptop. I only attach it to periodically charge it and test prior existing charges' performance.
O.K. here is the problem. I attach battery attachment, computer does not make it to the window screen more often than not. When it does, it freezes at the please wait loading screen.
I rarely use the battery at all, but I want all my equipment up and functional. It's life should still be good for I periodically recharge it. I think since I've had the laptop I've only recharged it a total of 6 or 7 times and that's been a year or so.
Battery Issue - Lenovo V570 (Laptop) - Battery Model L09S6Y02
O.K. here is the problem. I attach battery attachment, computer does not make it to the window screen more often than not. When it does, it freezes at the please wait loading screen.
I rarely use the battery at all, but I want all my equipment up and functional. It's life should still be good for I periodically recharge it. I think since I've had the laptop I've only recharged it a total of 6 or 7 times and that's been a year or so.Click to expand...
I, for the moment at least have the battery working power adapter attached. What did I do? I uninstalled Avast (freeware version) ?
I learned from prior experience that running two of any system utility software can cause problems, but it normally restricts itself to what it is protecting. Then I remembered: "If you remove the possible whatever is left however in probable must be the truth."
Next phase of testing is test the battery on it's own.