Hi, I've got an X1 Carbon 20FB (4th gen), and noticed it doesn't have Lenovo System Update on it, which I've found useful in the past. So I went to the Lenovo downloads site and found System Update, but it doesn't list the 20FB as one of the X1 Carbons it supports - it only goes up to 20BS, 20BT: http://support.lenovo.com/se/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-... (See the "Note for ThinkPad X1 Carbon users") Should I avoid downloading System Update then? I've not noticed anything that's not functioning, but I figured it makes sense to keep things up to date from a security and features point of view. Why is it not included by default? Thanks for any advice!https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/System-Update-on-X1-Carbon-20FB/td-p/3427436
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
I'm setting up a new X1 Carbon with machine type 20FB. It came with a Samsung MZNTY256HDHP SSD. I noted there was a recent SSD firmware update package for this laptop model, so I downloaded and ran the updater. It reported there were no updates. However, after digging a bit deeper, I discovered that the SSD firmware updater for the X1 Carbon 20A7/20A8/etc. DOES have an update for the SSD in this machine. What is going on here? Does this firmware update somehow only apply when the SSD is installed in a 20A7? Or did this particular model of SSD just get missed when Lenovo was putting together the firmware update package for the 20FB?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Missing-SSD-firmware-update-for-X1-Carbon-20FB/td-p/3485035
Hi, i just bought X1 Carbon (20FB series) running on windows 10. there's a sim card slot, but when i insert the simcard it keep poping out from the port the question is, is this laptop really support sim card? and how do i know if it work when i can properly insert it?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/x1-carbon-20FB-sim-card/td-p/3482102
I recently got a X1 carbon 4th gen (20FB), and I have been super happy with its performance. However, it seems like whenever I have the laptop closed, the keyboard is leaving a mark on the screen. I sent it to repair, and they changed the screen, but that didn't seem to fix it. I noticed that the body and the lid are not perfectly aligned - one of the corners of the lid seems to be jutting out a little bit with respect to the rest of the body. I've attached picture to show this. I'm not sure if this is a part of the general design of the Carbon. Can anyone with a X1 carbon 4th gen confirm that this alignment feature is not present in their machine? Thank you ?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-carbon-4th-gen-20FB-lid-and-body-alignment/td-p/3441108
Hi, does anyone know if there is a list of compatible embedded LTE chips that will work on a X1 Carbon 20FB? The reason why I ask this is bec the current model, EM7455, only operates at some frequencies that some abroad contries do not support and the older models such as the EM7355 support those frequencies. One being GSM. I tired to install a EM7355 into my 20FB laptop but the bios isn't allowing it. Thanks!
EM7455 is versatile enough and supports a lot of 4G/LTE including LTE-A and 3G bands worldwide. It does not support 2G (GPRS/EDGE) access technology.
__________________________________ThinkPad (1992 - 2012): R51, X31, X220, Tablet 8.Do you care about privacy and security ? Leave Google behind
We've purchased about dozen th gen x carbons machine type fb and nbsp have been having some intermittent keyboard issues with multiple laptops nbsp At least different units have had problems where the keyboard doesn't seem to work at all nbsp After power on nbsp we press F F or Enter to try and access different functions but they have no effect nbsp Once windows loads we still can't type anything nbsp nbsp The first time my tech ran into this he nbsp rebooted a few times and was still experiencing the same issue he nbsp set the laptop nbsp aside for me to look at nbsp When I turned it on they keyboard was functioning normally nbsp Later after loading our image on the computer he was preparing to deploy it to a user when the keyboard stopped working again nbsp I fired up a new laptop this morning fresh out of the box and had the same issue a non-functional keyboard nbsp In this case at least the touchpoint touchpad didn't work either nbsp I rebooted tried to get into UEFI config and after a couple of more reboots I tried pxe booting but nothing I pressed on the keyboard seemed to help nbsp I turned the laptop off and put a note on it that it had a bad keyboard iss... 4th intermittent Carbon x1 gen keyboard (20FB) but when my tech came in and turned it on a couple of hours later they keyboard is working fine nbsp nbsp I've got one in front of me right now that was working this morning but now the touchpad point aren't responding nbsp Keyboard is working though nbsp nbsp Lastly we issued one x1 Carbon 4th gen (20FB) intermittent keyboard iss... of this model to a user recently and she has intermittently had the keyboard stop responding while she's in the middle of working on a document nbsp After a few minutes it might start working again nbsp nbsp These issues may or may not be related to each other but it's very x1 Carbon 4th gen (20FB) intermittent keyboard iss... odd behavior and we haven't quite been able to pin down the cause nbsp Anyone else seen something of this sort nbsp Any suggestions
Hello all, We've got the same problem here with our x1 Carbon 4th gen (20FB). Lucky, we just purchased 2 but not 2 dozen. Both of them have the same problem which same as Swhitcher. We've called the Lenovo support hotline and ask for the onsite support. The on-site engineer replaced the mother board for us, but after 1 hour, problem occur again. We're going to deploy those computers to the end user very soon.So please, give us the solution as soon as you can, Lenovo!Many Thanks! Willihttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/x1-Carbon-4th-gen-20FB-intermittent-keyboard-issues/td-p/3375037
Hi, I have x1 carbon 20FB and I have Synoptics WBDI bio scanner. Device is working fine when I try to use scanner to log in to the computer. I'm interested in ability of using the scanner to store other passwords from secured web sites utilizing the scanner. Is it possible? If so - what do I need? Thanks, Jakar55https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-Fingerprint-Scanner/td-p/3457424
Hi, We are having an issue with our X1 Carbon's(20FB). The audio output via an HDMI cable works, we see the Epson speakers in the playback devices. After the user is logged on for a while, the speakers will no longer showup in the playback devices and the auidio will just come through the laptops speakers. After we restart the computer, the audio will again work and play to the speakers. Windows 7 X64 Any help or thoughts on this is greatly appreciated. Thanks,Johnhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-Audio-Issue/td-p/3464159
Carbon X1 connected to OneLink+ with current firmware 2.30 OneLink+ dock is connected to 2 DisplayPort monitors and some USB devices 1. If the X1 display is closed the system hangs on starting Windows2. If I open the lid and re-power the system and start up windows. Once I can get the the Login screen, I can then close the lid and all is good. Both external dispay work fine 3. X1 boots fine when not attached to OneLnk+ Workaround - #2 is not a great option in the long term Any help would be appreciated Stevehttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-won-t-boot-unless-display-is-open-when-connected/td-p/3434429
Hi, trying to get a Windows 7 Install done on a Carbon X1 2016 20FB w/ Samsung950 Pro. Bios 1.14 (latest as of May 2016)Special issue is, I need to get it done in a Legacy mode (BIOS,MFT style). I was able to install Win7 based on a win7 image that got the 950pro drivers and the USB3 drivers infused through NTLITE, and then I build an image with Rufus 2.9 (both UEFI/GPT and UEFI/MFT) worked, with the X1 BIOS was set up to UEFI only with CSM.BUT I need to to run on the BIOS setting 'Legacy' and in MFT style, b'cause the special Win7 installer I need to use does not support anything else. I know, sounds weird, but..... . So- is there a fundamental limitation against booting / installing a Win7 on a Carbon X1 2016 20FB - Samsung950 Pro in Legacy 7 MFT mode?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Carbon-X1-2016-20FB-Samsung950-Pro-Windows-7/td-p/3338627
I am trying to image this laptop from wds and looks like i am getting below error:
"windows could not set a partition active on disk 0. The target disk, partition, or volume does not support the specified operation. The error occurred while applying the unattend asnwer file's <DiskConfiguration> setting. Error code: 0X80300024"
Please see my attached answer file, not sure if that is somthing with this laptop model since even i try to go to it's pre installed windows, it just don't take me to windows.
Moderator note: serial number removed for member's protection.
xml version.docx ?13 KB
We've got about dozen of the th gen x carbons machine type FB and have had a high number of display related issues with them nbsp At the moment we have sitting upstairs waiting for UPS to pick up for shipment to lenovo service and one more on my desk that was Display X1 (20FB) flickering and/... issues -- Carbon just acting up nbsp I'm told that we have previously sent in at least another or laptops for similar issues nbsp I understand that those previous laptops had the displays replaced and that we have yet to see a recurrence of the issues in one that has been repaired nbsp The problems we've seen X1 Carbon (20FB) Display issues -- flickering and/... are intermittent and generally fall into one of two categories FlickeringVideo X1 Carbon (20FB) Display issues -- flickering and/... garbled missing sections or complete garbage nbsp The flickering is sometimes very faint barely noticable but other times it's more pronounced bad enough that users complain of X1 Carbon (20FB) Display issues -- flickering and/... headaches and or it's going to cause seizures nbsp The garbage video issue is what I just saw with the laptop sitting on my desk nbsp It went to sleep and when I woke it up this was what I saw nbsp After a few moments the laptop rebooted on it's own and the display was back to normal but I don't want to send this out with a user now just to get a support call when it nbsp happens again nbsp Is anyone else having this sort of issue nbsp Or did we just nbsp particularly unlucky nbsphttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-Display-issues-flickering-and-or-garbage-video/td-p/3400877
Hi There, I am trying to image this laptop from wds and looks like i am getting below error: "windows could not set a partition active on disk 0. The target disk, partition, or volume does not support the specified operation. The error occurred while applying the unattend asnwer file's <DiskConfiguration> setting. Error code: 0X80300024" Please see my attached answer file, not sure if that is somthing with this laptop model since even i try to go to it's pre installed windows, it just don't take me to windows. Please advise!
xml version.docx ?13 KB
Hello, I have this problem for month now :I close my X1 Carbon lid before going to bed, and in the morning, when I resume it from hibernation, the trackapd and trackpoint are totally unresponsive. Everything else work fine, I just have to wait, sometimes 20/30sec, sometimes a whole minute, to have the trackpad working. This is very frustrating to have a computer resuming so fast from hibernation but being unable to use it. I have the latest BIOS (1.15), latest UltraNav driver (126.96.36.199).Tried several drivers uninstallation/reinstallation, several fresh windows install, problem is still present. Actually on a fresh install of Windows 10 64bit (Anniversary update).https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-20FB-Ultranav-unresponsive-for-30sec-1Min-after/td-p/3386336
I recently reinstalled my windows 10 system and then can not find my wireless card. In the Device Manager, there is two hardware without drivers. 1) Network controller; 2) PCI simple Communications Controller.I went to the Lenovo support page and find out I need to install Huawei Huawei ME906s Wireless WAN Firmware Updater for Windows 10 and 8.1 - ThinkPad. However, I can not install this. It showed "Error code 10: Find port failed" Did I install a correct version. Or what kind of drivers I need to install for my wireless card. My model is :X1 carbon 20FBSystem: Windows 10 Thank you very much!https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-CAN-NOT-install-wireless-drivers/td-p/3479332
Hi all, I have have new X1 Carbon and really like it. However I am getting regular BSOD failures once or twice per week. I am running Win7 Enterprise SP1 and have all the lastest Lenovo urgent updates installed and most of the recommended and optional updates installed too. The BSOD have been of the following types:KMODE_EXCEPTION_NOT_HANDLED (1e) on June 28thMEMORY_MANAGEMENT (1a) on June 30thBAD_POOL_CALLER (c2) on July 6thMEMORY_MANAGEMENT (1a) on July 7thDRIVER_CORRUPTED_EXPOOL (c5) on July 21st At first I thought it was faulty RAM so I ran MemTest (http://hcidesign.com/memtest) for over night for two nights in a row and no issues were detected. Has anyone encouneted this issue and know how to fix it? Any recommnedations from Lenovo? If required I can attached detailed log dmps. Thanks,Ian
Look in the event log to see if a driver is throwing an error before the BSODshttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Frequent-BSOD-with-2016-X1-Carbon-20FB/td-p/3377470
Hi, I updated my X1 Carbon 4th gen to 1.17 BIOS, and since then, opening the lid won't wake the computer from hibernation, except when plugged.Bios changelog states Disabled the power button when the computer is in battery mode and the
computer lid is closedbut when I read "power button", I don't think "this is gonna break the behavior of the lid". And of course, no rollback is possible from 1.17, so I'm stuck with a computer wich won't wake from hibernation correctly. I just can advise you all to not upgrade bios, and see what's inside the next version...
Just got my brand new X1 Carbon (4gen 2016/20FB) with the 512 GB PCIe NVMe SSD (THNSN5512GPU7). Was expecting a blazing fast disk, but it felt sluggish something that AS SSD Benchmark confirms (see attachment). According to the specs this drive should offer up to 2400 Mb/s read and 1500 Mb/s write. But I get 1800 MB/s read and abysmal 113 MB/s write. The machine has all the latest updates from Lenovo (incl BIOS) and all the drivers for Windows 10. Anyone else tested their drives? Found a Dell XPS owner with the same drive that complained about the same issue. Turning off windows write cache buffer flushing does help, but that is not a good answer.
as-ssd-bench NVMe THNSN5512GP 08.08.2016 10.41.20.png ?31 KB
Hello! I have made many driver pachages and image loads of lenovo pc, but i cant figure this one out. I think I have spent 4 hours of researching and I have realised I need to put down my pride. I need help. Using:Sccm 2007.WinPe 3.1 I'm using the Onelink+ pro usb to RJ45 adapter to get ethernet. It says it supports PXE. We use winpe 3.1 and want to deploy Win7.I have added all the drivers from Lenovo sccm pachage. I have turned "only legacy" in the bios. I have added the USB3 Exstension driver to both the image and WinPE. I get to download the Winpe and start it up. It have an IP and shows activity untill it start Winpe and check connectivity. It show error, but simply just reboot. When i f8 and type ipconfig /all it shows nothing. Please help me.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-model-20FB-Deployment-issues-PC-restart-after-loading/td-p/3351416
Hi, the power options sets that the display should turn off in X minutes. But it doesn't do it at all. Instead, the computer is locked and the display dimms. I'm pretty sure that I have installed the latest monitor and graphic card driver. For testing it, I have also unplugged all USB devices. What can still be the reason? Thanks!https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Thinkpad-X1-Carbon-2016-20FB-won-t-turn-off-display/td-p/3479770
Hi all, I have the X1 Carbon 2016 (20FB) and it is running Windows 10 Enterprise. I have all the lastest Windows and Lenovo updates. It all works pretty well except when it comes to starting back from sleep mode. I have the laptop configured to go to sleep when I close the lid. However when I reopen the lid, the power button and keyboard lights come on but the display stays off. Opening and closing the several times doesn't help. The only way to get the display to turn on is to quickly press the power button. This puts the laptop to sleep. If I press the power button again the laptop comes back to life and the display works again. Anyone else have this issue? Any possible solutions? Thanks,Ianhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-20FB-display-doesn-t-work-after-opening-the-lid/td-p/3454282
i recently got a new mainboard for my x1c 2015 and i find that the BIOS just could not get updated through the Lenovo official software.so strangemy current BIOS/EC version is1.03 (N14UJ02W) 1.03 (N14ET25W) 1.02 (N14HT29W)what i've done trying solve this:1 BIOS settings-checked.there is no bios update prevention settings2 BIOS reset-tried but it doesn't work3 System version-changed from Win7 to Win10,nothing happened.anyone could help me figure this problem?.besides,i noticed the info page of BIOS showed that the ME firmware version is blank,could there be any connection with my prob?thanks a lot guys.
Dear all nbsp I have a BS with a very old piece of BIOS installed N ET W dated - - nbsp I have been trying to apply all versions of BIOS listed in nbsp nbsp nbsp nbsp nbsp http support lenovo Carbon X1 failing update to BIOS - com us en products laptops-and-netbooks thinkpad-x-series-laptops thinkpad-x - nbsp in vain as BIOS update software both Windows version and CD-ROM version fails to verify secured flash image nbsp I would appreciate it very much if you kindly suggest any solution nbsp P S nbsp The BIOS installed on my nbsp X Carbon is NOT listed nbsp nbsp nbsp nbsp nbsp X1 Carbon - failing to update BIOS https download lenovo com ibmdl pub pc pccbbs mobiles n uj w txt nbsp Package nbsp nbsp nbsp nbsp nbsp ID nbsp nbsp nbsp nbsp UEFI BIOS BIOS ID nbsp ECP ECP ID nbsp nbsp nbsp nbsp nbsp Rev nbsp Issue Date-------------------- nbsp ------------------- nbsp --------------- nbsp nbsp ---- nbsp ---------- nbsp nbsp nbsp nbsp nbsp N UJ W nbsp N ET W nbsp nbsp nbsp nbsp nbsp N HT W nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp X1 Carbon - failing to update BIOS nbsp N UJ W nbsp N ET W nbsp nbsp nbsp nbsp nbsp N HT W nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp N ET W nbsp nbsp nbsp nbsp nbsp N HT W nbsp nbsp For nbsp factory use nbsp nbsp nbsp nbsp nbsp N UJ W nbsp N ET W nbsp nbsp nbsp nbsp nbsp N HT W nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp N UJ W nbsp N ET W nbsp nbsp nbsp nbsp nbsp N HT W nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp N UJ W nbsp N ET W nbsp nbsp nbsp nbsp nbsp N HT W nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp N UJ W nbsp N ET W nbsp nbsp nbsp nbsp nbsp N HT W nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp N UJ W nbsp N ET W nbsp nbsp nbsp nbsp nbsp N HT W nbsp nbsp nbsp nbsp nbsp
HiPlease, specify, the real lapop model. Machine-Type 20BS belongs the 3rd generation of x1c.Anyway, do you have laptop engineering sample?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-failing-to-update-BIOS/td-p/2151461
i download Need For Speed Carbon Update v as it says cannot create seesssion and stuff so i download update and when isntalling the command prompt comes and goes so i probally think it installed but when igo in game it dont work at all it still says v and same problem this is the regini EXP DEFAULT INSTALL DIR - gt DEFAULT INSTALL DIR EXP quot Software Electronic Arts Need for Speed Carbon quot - gt quot Software Electronic Arts Need for Speed Carbon quot EXP quot Install Dir quot - gt quot Install Dir quot EXP HKLM quot Software Electronic Arts Need for Speed Carbon quot quot Install Dir quot - gt C PROGRA ELECTR NEEDFO DEF DEFAULT INSTALL DIR lt - C PROGRA ELECTR NEEDFO ------------ EXP SPANISH INSTALL DIR - gt SPANISH INSTALL DIR EXP quot Software Electronic Arts Need for Speed Carbon quot - gt quot Software Electronic Arts Need for Speed Carbon quot EXP quot Install Dir quot - gt quot Install Dir quot EXP HKLM quot Software Electronic Arts Need for Speed Carbon quot quot Install Dir quot - gt C PROGRA ELECTR NEEDFO DEF SPANISH INSTALL DIR lt - C PROGRA ELECTR NEEDFO ------------ EXP INSTALL DIR - gt INSTALL DIR EXP DEFAULT INSTALL DIR - gt DEFAULT INSTALL DIR EXP VAR DEFAULT INSTALL DIR - gt C PROGRA ELECTR NEEDFO EXP quot quot - gt quot EXP EQ VAR DEFAULT INSTALL DIR quot quot - gt EXP SPANISH INSTALL DIR - gt SPANISH INSTALL DIR EXP VAR SPANISH INSTALL DIR - gt C PROGRA ELECTR NEEDFO EXP DEFAULT INSTALL DIR - gt DEFAULT INSTALL DIR EXP VAR DEFAULT INSTALL DIR - gt C PROGRA ELECTR NEEDFO NUM - gt EXP IF EQ VAR DEFAULT INSTALL DIR quot quot VAR SPANISH INSTALL DIR VAR DEFAULT INSTALL DIR - gt C PROGRA ELECTR NEEDFO DEF INSTALL DIR lt - C PROGRA ELECTR NEEDFO ------------ EXP nfsc patch ini - gt nfsc patch ini EXP Patch - gt Patch EXP InstallDirectory - gt InstallDirectory EXP INSTALL DIR - gt INSTALL DIR EXP VAR INSTALL DIR - gt C PROGRA ELECTR NEEDFO SET INI nfsc patch ini Patch InstallDirectory Problems) Speed For (Update Carbon : Need lt - C PROGRA ELECTR NEEDFO Need For Speed : Carbon (Update Problems) please help nbsp
i am a big fan of nfs but now i can't play it.
it starts up. no problem but after a few minutes.. it hangs up then crashes. it automatically exits. then it sets my desktop resolution from 1152x864 to 800x600.
what could be the possible problem? help me with this pls. thanks.
I just updated my laptop the bios the ... Carbon - After computer at X1 remains update, update that was recommended by Lenovo and I left it on to update as it told me not to touch anything or turn anything off nbsp After X1 Carbon - After update, computer remains at the ... the update during its automatic restart it went to this screen and just stayed there for about hours Since then I've tried playing around with the BIOS menu and X1 Carbon - After update, computer remains at the ... tried doing the F - Recovery but it returns to the same windows logo screen except it loads for about seconds and says 'Preparing Automatic Repair' and freezes nbsp P S I had Windows factory but updated to Windows free upgrade way back when they were offering the X1 Carbon - After update, computer remains at the ... free upgrade nbsp nbsp nbsp I may just try taking it to a repair shop I would like to be able to recover files before wiping the entire drive but if needed I am willing to lose everything in order to have my computer working again nbsp Thanks in advance
Welcome to Lenovo Community.
Does this appear to be the problem that you are having? If so, a workaround is included on that page: https://support.lenovo.com/us/en/solutions/SF16-T0079
Let us know if that helps.
Hi, I have an X1 Carbon. I did an automated Windows update today, it seemed to work fine initially but then my laptop got into a blue screen loop and kept restarting. The computer worked for a while after that and then gave a blue screen again. This time the keyboards flashed as well for a while, and then the computer turned off. I cannot start the laptop since then. I searched the forum and tried the hard reset, but it did not help. When I try powering on, keyboard lights turn on for just a second and then they go off. The green power button light turns on but the computers does not start. Can anyone help? I am traveling for work and looking forward to getting help. Thanks!
What generation of carbin? What OS?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Carbon-X1-will-not-start-after-Windows-update/td-p/3421675
Hello nbsp I have a ThinkPad X Carbon rd generation Two days ago I have updated the nbsp Carbon... ThinkPad Fan - Problem BIOS Update after X1 BIOS to the latest version nbsp The installation went well and I successfully booted into Windows with no Fan Problem after BIOS Update - ThinkPad X1 Carbon... issues However the fan was not working anymore I did not notice this until the laptop was extremely nbsp hot which is very unusual for this laptop under low medium load In particular nbsp I was just running a disk cleanup using the native Windows tool and after minutes I decided nbsp to kill the process this operation usually takes - minutes My Fan Problem after BIOS Update - ThinkPad X1 Carbon... feeling was that due to the temperature the cpu was in nbsp throttling At that moment I noticed that the fan was not active nbsp After a shutdown the fan was again working However I noticed that the fan nbsp kicks in much more often than it nbsp was used to For this reason I did two things - I have downgraded the BIOS to BIOS updated the CPU microcode I am not sure that the microcode was downgraded as well when I downgraded the BIOS nbsp - I have run the Intel Processor Diagnostic Tool Fan Problem after BIOS Update - ThinkPad X1 Carbon... I was afraid that the high temperatures may have damaged the cpu The tool reported that the maximum temperature of the cpu during the benchmark was always safely within the expected threshold and all the tests were passed nbsp Now I still can see that the fan kicks in much more often than usual I have noticed using sensors nbsp under nbsp Ubuntu that every time there is a very short burst peak of cpu usage e g I start Google Chrome and visit nbsp Gmail the sensors report a very high temperature nbsp but just for lt nbsp second e g from degrees to degrees and then soon goes nbsp back to degrees This is the reason why the fan kicks in it remains active for - minutes starting from a high RPM value and then going down as expected I don't think that the temperature actually reaches degrees I expect an immediate but small increase e g degrees of the temperature due to the burst but nothing like degrees nbsp I think that the sensors are nbsp returning junky values I never saw this temperature behaviour instant jump temperature degrees or more due to short bursts peaks before the BIOS update nbsp In my opinion the sensors are not returning stable values as before but they are very jumpy Few questions - Is there any bug report about BIOS update How can you explain the temporarely non working fan after the update I think this may be a serious concern - How can I debug my issue with the temperature sensors Is there any way to reset them Do you think this is a software or hardware problem - Do you think that the high temperature may have damaged the sensors nbsp nbsp Thank you Emilio nbsp
Laptop has got anti overheat thing so if temp rises over 100c it will automatically power off like if the battery was dead and that you unplugged it that sort of power off so temps you don't have to worry but as long laptop alone isn't idle at 80-90c then laptop needs clean out to fix it and if that won't fix it then it could be something elsehttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Fan-Problem-after-BIOS-Update-ThinkPad-X1-Carbon-3rd-generation/td-p/3307720
Hello All, I?ve received the Windows Downgrade Recovery Media for windows 10 Pro from Lenovo and I?ve followed all steps for the upgrade from windows 7 : -Bios and all driver update with ThinkVantage-changed in bios option ?OS Optimized defaults to enable?-reboot-press f12 and boot from usb key After that, a black screen with win10 Logo appearin 10 seconds it changes to a Lenovo Logo with a lifebeltI would expect a windows form for the selection languages , but my thinkpad x1 reboot and restart with windows 7.I tried also to modify from bios the boot order putting the highest priority to USB, but in this way start a loop.I think that the problem could be in the USB media that they have sent me.My upgrade to win10 pro is stuck, do you have any idea?Thankshttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/System-upgrade-from-win-7-to-win-10-on-X1-Carbon-20FB/td-p/3446460
Hi, guys!Some info:X1 Carbon (type 20FC)Intel HD Graphics 520 (driver 188.8.131.5231)Windows is up-to-date So far, everything works fine. If I update my graphics driver through Lenovo Companion to 184.108.40.20644, backlighting is stuck at 100%.If I update my graphics driver through Lenovo's support website/Windows device managers' automatic update to 220.127.116.1105, it kills my backlight completely. The only way to get things back to normal is to boot in safe mode, uninstall the graphics driver, reboot and prevent Lenovo Companion from installing the new driver automatically. Please tell me what's wrong and/or fix the grahics driver. Thanks.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-graphics-driver-update-kills-backlight/td-p/3451963
Hello, I just recently performed the 26-Jul BIOS update to 1.14, for my Thinkpad Carbon X1 (20BS) with windows 10.The update went ok, but afterwards, Windows is crashing when booting. Using a bootable Windows 10 installation disk also crashes when booting. The recovery environment also crashes when booting. Using detailed logs, it seems to crash when activating the ACPI microcontroller. I would assume that has something to do with the UEFI update, that I have disabled in the BIOS. Enabling it does not recognise the disk, as it is not a GPT partition. I tried to rollback the BIOS, but it does not allow it. Do you have any suggestion on how to proceeed? Thanks,Pedrohttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Thinkpad-Carbon-X1-20BS-Bios-update-windows-locked/td-p/3385126
I have had my Dell for little over 8.1: when partition." or couldn't 10 to reinstall operating update Error reserved message system to to system trying update We the Windows a year and have had problems from the beginning nbsp I am years old and I am at my wits end A hard drive was replaced in the summer of but I have still had problems with the computer shutting down and my having to refresh it to factory setting I thought updating to Windows would solve some problems and I did this in October nbsp Everything was fine until a couple of months ago nbsp The end result was when I tried to refresh the computer to factory defaults it went back to or and I evidently lost something in the process Now I cannot update to Windows and when I tried to resinstall the Dell Operating System I get for both nbsp quot WE COULDN T UPDATE THE SYSTEM RESERVED PARTITION quot I DO HAVE A SYSTEM BACKUP ON CDS MADE WHEN I HAD WINDOWS nbsp Could I reinstall the system with these backupdisks nbsp How do I do that nbsp I also have a Dell Boot USP stick I have a recovery stick too but it semed that when I used this I received a message that not all files were recovered What should I do at this point nbsp
On MBR disk, Windows 10 requires a 500MB system reserved partition, while 100MB in Windows 7, so you can try to extend system reserved partition.
In disk management, you can only extend partition using the unallocated space next to its right side. so even if you shrink D: drive, the option to extend the efi partition is still grayed out. My suggestion is to use a third party software, AOMEI Partition Assistant, both the standard (free) or the Professional(paid) version can extend partition as long as there is unallocated space on that hard drive. to see more information read:
Fix "We Couldn?t Update the System Reserved Partition" Error
I set the trackpoint speed in the mouse pointer options in control panel nbsp to max speed and then I also set the trackpoint to max speed in the synaptics specific driver nbsp nbsp This is great the mouse is really responsive and i can scroll quickly and move the mouse from the left side to the right with very little pressure nbsp nbsp Recently though I have noticed that the trackpoint nbsp has about halved in responsiveness and to move at full speed i have to apply maximum pressure against the trackpoint nbsp nbsp This is making my finger quite sore and is extremely annoying even my old t and trackpoint 4 less Lenovo resp... Gen (20FB) became X1 T have way better trackpoint responsiveness nbsp nbsp I've tried reinstalling the trackpoint driver but no luck nbsp I noticed that there seems to be a fairly recent trackpoint driver update Lenovo X1 Gen 4 (20FB) trackpoint became less resp... and was wondering if that was the problem nbsp nbsp But lenovo do not publish the Lenovo X1 Gen 4 (20FB) trackpoint became less resp... older drivers like they used to nbsp nbsp nbsp How do I fix this I'm not even certain whether it is a software issue or hardware nbsphttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Gen-4-20FB-trackpoint-became-less-responsive/td-p/3380491
trying to install windows x on a thinkpad x type fb and having issues nbsp Already called Lenovo support x1 install 20fb Win7 on SM951aPCIe... type thinkpad & and they were not help nbsp Can someone help with this Win7 install on thinkpad x1 type 20fb & SM951aPCIe... problem when i Win7 install on thinkpad x1 type 20fb & SM951aPCIe... try to boot from a usb drive with a windows i am able to see the PCIe NVMe drive but when i tried to format or click new to install windows i recieve a message of this hardward may not support booting to this drive and i am not able to install windows nbsp The drive is visible through the bios and through the boot menu nbsp But cannot install into the NVMe drive nbsp i read somewhere on the forum that the new skylake and nvme only works if the boot option is set to uefi nbsp tried that too but did not work nbsp Can someone help me with this issue i just need some help trying to install windows x on thinkpad x type fb with SM aPCIe NVMe nbsp Is there a bios option that i need to change to make the laptop see the NVMe drive When i install a M drive i am able to install windows without any issues but having issues with the SM aPCIe NVMe drive nbsp Thank you Solved Go to Solution
What gen is your x1 carbon? Is it 3rd gen? If so that model does not support NVMe ssd due to it has no NVMe technology only 4th and yoga model of x1 Carbon has got NVMe support.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Win7-install-on-thinkpad-x1-type-20fb-amp-SM951aPCIe-NVMe-issue/td-p/3305710
HiI own a X1 Carbon Gen 2 thinkpad and wonder if it is possible to replace the current keyboard with a X1 Carbon gen 3 keyboard (with proper mouse buttons), or if it will not fit?I have tried to check the manuals and the connectors seems similar although some things, such as the fingerprint reader, seems different. I have no problem "loosing" the adaptive keyboard and fingerprint reader if I can have all the functionality of the keyboard and trackpoint on the new "keyboard" (i.e. the gen 3 frontpanel).
I am interested in this exact topic as well. Looks like the Gen 3 keyboards lack the adaptive keyboard - that clear stripe on the top that changes. The FRU for these X1 Carbons seem to be the whole keyboard, adaptive part, trackpad and bezel - they go for 150 USD or so. Problem is we don't know if it will work given the model year differences. A nice alternative would be just to replace the trackpoint. They came close with this one, but it is no macbook in terms of tactile feel of the pad. I really am having a hard time with it and it's been about a month. Lenovo please help!https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Gen-3-Keyboard-on-X1-Carbon-Gen-2/td-p/1939212
Hi. I don't know what has happened but my pc is running strangely recently. For example, I can't install the visual c redistributable (vcredist.exe), or directx 9.0c, and some games don't work which did a while ago - now they crash to the desktop. I haven't got a restore which fixes the problem. It is all a bit strange.
I've got windows 7 64 bit on a Dell vostro - i7 860, 4g ram etc.
I've tried microsoft security essentials, all manner of spyware removers including spyware search & destroy to no avail.
What should be the next step in investigating this?
Thanks for any help!
Microsoft Windows 7 already has DirectX 11, so installing version 9 will always fail and is useless. It also has VC++ redistributable 2005 and 2008. The latest version which is not included on Windows 7 is VC++ 2010 redistributables which you should install (but very few games are designed in VC++ 2010 today). When games fail, they create a crash report or log. You should go through them and try to find the possible cause. What message do games show when crashing?Check Event Viewer to find the possible cause of crashing of a game.http://www.bleepingcomputer.com/forums/t/358151/cant-install-visual-c-redistributable-or-directx-90c-cant-update-security-update-for-visual-c-system-update-readiness-etc/
I have am currently running IE9 and see an error code of 9C59 when installing the update to IE11.
The Windows Update Troubleshooter reported the service registeration is missing or corrupt (not fixed), and the Windows updat error 0x80070490(2014-12-12-T-07_49_01P) (not fixed).
I then downloaded the system update readiness tool, but it would not install, and I received the following error:
Installer encountered an error: 0x8007000d the data is invalid.
Can you tell me what to do next?
Hi and welcome to SevenForums,
You might attempt to download ie10 instead,
Both are offered through the windows update system is that where your attempting to download 11 ?
Right click the ie11 update and click on Hide,
Manually check for update ie10 will now be offered,
I googled the issue and found that this could mean my system reserved partition is full and indeed that is what I found. My C: drive is a 500 GB SSD but the system partition is only 100 MB of which only 3 MB is free.
MS web page has a long convoluted command line "fix" for this (https://support.microsoft.com/en-us/kb/3086249) but I was wondering why I couldn't just "shrink" the main C: drive partition and then "extend" the system partition using diskmgmt.msc.
Or is there a better way?
Hello Ray Lo,
Yes, potentially you can do this... But I would suggest backup of your SSD, before you try to do anything as such... WRT shrinking and moving partitions! Just in case!
One extra step enforcing security does no hurt, does it?
HP Envy 17 3D (M0del: LV045UA#ABA) with Radeon 6850M and Mobile Intel HD Graphics.
On 9/3/11 the Microsoft update site provided a 150+ MB update for the video system. After the update downloaded and began to install, the video system crashed (the screen went blank) and did not recover after more than an hour.
I then performed a system image restore from a backup external hard drive. I tried again to install the update and again the video system crashed.
Anyone else experience similar problems with this update?
LMC, welcome to the Seven Forums.
What happened is your laptop has switchable graphics and will only work properly with the driver from the laptop manufacturer, in your case HP (or any other laptop with switchable graphics). Problem is that WU is essential stupid in that it doesn't know that and only sees one or the other of the video cards in the laptop, and as a result offers and installs one that won't work with it.
In this case stop trying to install it as it will never work. Just hide the update in WU so you don't see it and only ever install a video card driver update from HP.
Tried win 10 anniv update and after 10 hours! it sat on 99%. Finally shut it down. Now when I try to update from setting-update, that locks up & I have to use task manager to exit it. Heard a lot about problems with the anniv update, now I know. Also what do they mean when updating with the ISO? I know little-if anything about programming.http://www.tenforums.com/windows-updates-activation/61162-win-10-anniv-update-stuck-system-update-locks.html
I have on failed a... update Update System ThinkVantage bios or had a laptop purchased months ago therefore under warranty Yesterday the ThinkVantage System Update recommended a BIOS update After the traditional recommendations about what ThinkVantage System Update failed on update bios a... should not shut down the computer the laptop is reset and started with the update During execution displayed on a screen command a message ERROR XXXX Press any key to continue ThinkVantage System Update failed on update bios a... After press the key the laptop was freezedy was completely blocked After an hour without seeing response and no sign of life I decided to turn it off to confirm the disaster The laptop was dead The laptop began to beep and would not start Before the panic generated by the situation I searched the forums where I found several cases that refer to the same ThinkVantage System Update failed on update bios a... problem and the insinuation that makes LENOVO about the customer's responsibility to avoid recognizing the warranty I was not looking for a BIOS update it was recommended by ThinkVantage System Update the software executed it and damage the equipment Besides being a damage caused by the ThinkVantage System Update the situation gets worse when the answer given by support insinuates that the customer turn off the computer so it is a CID Customer Induced Damage and therefore the guarantee does not cover it I do not understand how LENOVO may imply that the responsibility of the customer Really disastrous In conclusion if you are not needing to make a BIOS update it is preferable to omit the BIOS update messages given to ThinkVantage System Update unless it is willing to buy of your own money a new laptophttps://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/ThinkVantage-System-Update-failed-on-update-bios-and-damage-the/td-p/3453945
I just saw the new Client System Update utility for my E6500, downloaded, and installed it on Win7 x64. I've been talking about Dell creating such a util for years and finally Dell did.
However, it does not work. After I press the Check for updates button, after a bit it comes back with "Check for updates failed" and the GUI-U15 error in the logs. I tried many times, including after a reboot. Also, the app just disappears (probably crashes silently) when I go to Advanced->system details.
Any ideas? I was excited to spread the word around about it but can't as it doesn't work at all.
I have the exact same problem on an Optiplex 960 running Windows 7 X64.http://en.community.dell.com/support-forums/laptop/f/3518/t/19311046
I receive an update failed error when trying to imstall the following update:HP Notebook System Bios System Update (Intel Processors) Failed to update Is there a way to succesfully update this? Is this a critical update? ThanksAnthony
Hi @WildFan?, Thanks for getting back to me. Yes, I can give you the links to the downloads. HP Notebook System BIOS Update (Intel Processors)Intel Chipset Installation Utility and Driver Hope the helps.http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/HP-Notebook-System-Bios-System-Update-Intel-Processors/td-p/5481194
What is happening with Lenovo System Update? We are getting an error that the package catalog is being updated? We have several models here and its happening on all of them. I can't find anything relating to this update on any Lenovo site, and the response I got from calling support was "Sorry." They were also not able to tell me when they think this will be fixed. EDIT: Spelling.
LSU.jpg ?19 KB
Referring to this documentation https://download.lenovo.com/pccbbs/mobiles_pdf/tvsu5_mst_en.pdf there are supposed to be registry values added by the installation of Lenovo System Update. However they are not apparent with the given path on any of our enterprise machines. I would like to initiate the deployment of system update with update retriever in order to manage updates from a network location, but run into issues with the documentation. Any help? We use lenovo T450, T460, X1 Carbon.https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/System-Update-w-Update-Retriever-REG-keys-not-visible/td-p/3449070
I am receiving this message when I run sp76205: The system BIOS update file (c:\SWSetup\SP76205\hpqflash\ROM.CAB) is missing or corrupt. The system BIOS will not be updated." SP76205 was just released in June 2016 and I noticed other user are experiencing the same issue with it. Please provide a fix BIOS update or explain how to run this current update...http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/BIOS-Update-sp76205-Error-Message-Can-t-update-system-bios/td-p/5662276
Looking to replace my W530 for something a little lighter ...Any ideas when we'll see X1 Carbon with USB-C?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-USB-C-when/td-p/3313472
I have two gen 2 X1 carbons, one with an i5 4200u (8GB RAM) and the other is i5 4210u (4GB RAM). The 4210u one, when not doing anything very intensive, is completely silent. I can put the vent up against my ear and hear nothing at all - the fan is off. The 4200u is not the same. When it boots off, the fan is off. It will stay off for about 30 seconds and then start up. It's very quiet but I don't see why it's on at all. It should be off, all it's doing is wasting power. Why is it that the 4210u stays off until I'm doing something intensive but the 4200u is always on? The 4210u is 100Mhz faster but they have the same TDP. Is there something I forgot to install after updating to Windows 10 that tells the fan to shut up when not doing much? Thanks for any helphttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-fan-always-on/td-p/3450334
Hi, I have read that all the carbons after the gen 2 use an M2.ssd. Is there anything to stop you from changing or swapping the ssd around. Are there any videos or pictures online that might show me where the drive is located. Is there anything that would stop me from buying the model with the smallest and cheapset M2 ssd and then later putting in something newer? Thanks
Sorry, perhaps I can rephrase this a little clearer. Can I assume that all the thinkpad carbon gen 4s will support any NVMe M2 SSD that I buy?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Gen-4-SSD/td-p/3306872
bought one 1.5 years ago - 20a7 CTO1WW . Integrated Graphics Card died couple weeks ago. No replacement for motherboard on the the lenovo site. any ideas?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon/td-p/3346391
Hi, Did anybody succesfully install 1 TB drive on gen 2 yet? Something like below drives: https://www.amazon.com/Sandisk-Solid-State-Drive-SD8SN8U-1T00-1122/dp/B0194MV300/ref=sr_1_1?ie=UTF8&... https://www.amazon.com/Samsung-850-EVO-Internal-MZ-N5E1T0BW/dp/B01G844PC0/ref=sr_1_7?ie=UTF8&qid=147...https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Gen-2-1TB-ssd/td-p/3430148
First actual "system" update i seen on Windows update!
Update for Windows 7 for x64-based Systems (KB974332)
Download size: 1.7 MB
You may need to restart your computer for this update to take effect.
Update type: Recommended
Install this update to resolve issues with non-compatible applications for Windows 7. For complete details of this update, see Knowledge Base Article KB974332. After you install this item, you may have to restart your computer.
Windows 7 and Windows Server 2008 R2 Application Compatibility Update
Help and Support:
Microsoft Help and Support
Not that i see the need for updates, the OS runs fine for me
Quote: Originally Posted by ussj4brolli
First actual "system" update i seen on Windows update!
Update for Windows 7 for x64-based Systems (KB974332)
Download size: 1.7 MB
You may need to restart your computer for this update to take effect.
Update type: Recommended
Install this update to resolve issues with non-compatible applications for Windows 7. For complete details of this update, see Knowledge Base Article KB974332. After you install this item, you may have to restart your computer.
Windows 7 and Windows Server 2008 R2 Application Compatibility Update
Help and Support:
Microsoft Help and Support
Not that i see the need for updates, the OS runs fine for me
Thanks for the info, anyone notice any problems with this update before I install? Thanks
I have build 7600 Ultimate 64 bit installed.
i hav a carbon game , and when i try to start the game a black screen comes and says , "nfs carbon has encountered a problem and needs to be closed. we are sorry for the inconvenience". please suggest a solution
without more detailed information there is no way we can solve your problem, please tell us about your system, eg. graphics card, processor, RAM and click on "see details" or something of the sort and post a screens shot by presseing the "print screen" button then moving to a program like paint and pasting it there by either holding Ctrl+v or right clicking then paste then attach here
Hello all, Not sure if this has been discussed , but will Lenovo have another generation of the X1 carbon or is this year's 4th the last ?I am dating whether to get the t460s or the x1 carbon thxJRhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/5th-generation-X1-carbon-will-there-be/td-p/3442186
I just bought my NFS Carbon Collectors Edition about a month ago, and the first time I installed it everything worked perfectly...but just recently I did a complete reboot and cleaning of my system (as in everything). When everything on my comp was back to normal, I tried to install NFS again but alas! It failed!
For some reason the only point I can reach during the installation process is the license agreement, which appears blank. If I agree with the license, it then tells me that I need Direct X 0(yes 0) or higher to continue.
I have no idea what that's about... I checked my disk, which is so new it doesn't have time to get any scratches on it, and even scanned it for errors, but nothing showed up.
I really need some help on this matter. Any support will be appreciated.
Install the latest version of DirectX, available here, and see if it works.
My friend is trying to play Need For Speed Carbon, but it doesn't load up. He gets a black screen, but then it quits with the error NFS has encountered an error and must close. He has an Integrated 92mb vid card (should be enough considering the game ran fine on my Laptop's integrated vid card). his drivers are up to date, but still no go. Any suggestions?
Hey Guys nbsp First time posting here I'm trying to find the best configuration for my X Carbon At first I wanted Processor Intel Core i - U Processor MB Cache up to GHz Operating System Windows Pro Display WQHD x IPS Non-TouchMemory GB LPDDR SDRAM MBHard Drive GB Solid State Drive PCIe-NVMe OPAL - CapableThis is basically the top of the line configuration I was pretty confident Carbon Gen) Help Customization (4th X1 about this but then I read a couple of user reviews that said that maybe the i u and the gb of X1 Carbon (4th Gen) Customization Help ram is a little too much for the machine to X1 Carbon (4th Gen) Customization Help handle whic made their machines really slow nbsp So now I'm unsure if I should go for this configuration The alternative for me is to X1 Carbon (4th Gen) Customization Help go for the i u with gb of ram instead nbsp nbsp I need help with deciding what the best configuration is What specs do your th gen carbons come with Any help will be appreciated I really want to get this right since my current laptop is trash and I don't want to regret my purchase nbsp nbsphttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-4th-Gen-Customization-Help/td-p/3382713
My computer was doing some Windows updates yesterday. I thought the process was done, but now I'm thinking maybe I shut it down a little too soon. This morning when I tried to boot up the computer, I couldn't get past the start up screen with the Lenovo logo. Sometimes the screen just stays there, sometimes it moves on and the screen just goes blank. I can't make it past this screen. I've tried doing a hard reset. I poked around some of the settings in safe mode (which I can't always get to), but nothing seemed to work. Anyone have any ideas on recovering rather than having to wipe the whole computer and start over?
I got my ThinkPad X1 Carbon 4th gen directly from Lenovo two days ago. This morning it won't turn on let alone boot. Tried the reset several times. Tried the press power 10 times for 1 sec then 30 sec. Still won't turn on. I spent about two days getting everything set up. Appartently two days wasted. I am working with Lenovo on getting a new machine but this is pretty frustrating. I don't see a way to disconnect the battery whcih is part of the "press power 10 times for 1 sec then 30 sec" solution that I have seen on the web. I think Mark_Lenovo has posted on this (for perhaps older X1s) but I cannot see a way to contact him. I think this must be some sort of static issue. I really hope this is not a common X1 problem. I wonder if I should just get a refund and start with a different computer. I have a ThinkStation which works well which is why I went for a ThinkPad to replace my 2012 Macbook Pro Retina Display.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/x1-Carbon-won-t-start-up/td-p/3419242
I am planning to buy a compaq presario V6102AU laptop with the follwing conf. if any one has a similar configuration plz help me out
AMD Turion 64x2 TL-50 (1.6 Ghz) processor
1Gb RAM DDR2 (667 Mhz)
video adaptor: integrated Nvidia Geforce Go 6150
video memory: Up to 128 MB shared memory
100 GB SATA HDD
Tell me ..... will the integrated Nvidia GPU will be able to run NFSC on it.
X1 Carbon Gen 4 (2016) GPS Is available with optional Wireless WAN Integrated Mobile Broadband 4G LTE (Huawei ME906S) which according to Huawei?s specs has GPS built-in. No mention of GPS capabilities in Lenovo?s specs for X1 Carbon Gen 4 (2016), so can anyone comment about experience? Does GPS work in X1 Carbon Gen 4 (2016)? X220 has Lenovo GPS Enabler ? anything similar in X1 Carbon Gen 4 (2016)?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Gen-4-2016-GPS/td-p/3342538
My new laptop will randomly shut turn itself off. It's happened twice this week and I've only had it a couple weeks. Thoughts?
Did you ever resolve this? My X1 shuts goes to sleep after about 2 minutes and I have to log in to wake it up. It's an annoyance--if i stop to think about anything for more than 2 minutes I have to wake it up each time. About once a day it turns itself off entirely. I know the settings are correct, and all drivers are current This happens whether it is plugged in or not.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-keeps-shutting-down/td-p/2174850
I have a X1 Carbon Model 20FB...... I purchased a USB RJ45 Dongle to PXE boot for imaging and it is failing to boot. It never lights up like it is going to work, model of USB device U2L 100P-Y1 (labeled lenovo).... Does anyone have an answer as to how to solve this issue. I have tried multiple drivers and can't seem to find the correct driver. Thankshttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-PXE-Boot/td-p/3369111
ok maybe a stupid question, but I just saw this lady's Dell laptop and it said windows7 carbon, what is that??? is it some kind of unlicensed OS??? didn't look like just a background or a theme
Was that on the Welcome screen? Mine is Windows 7 Ultimatum. After I'd edited some images in the basebrd.dll file!http://www.sevenforums.com/general-discussion/163655-windows7-carbon.html
I just purchased a new X1 Carbon with a 512Gb PCIe-NVMe SSD. I failed to follow my general rule of getting as much memory and disk as possible. So, I'd like to upgrade this SSD but have three questions: 1) What actual part do I have to order from Lenovo,2) How do I install it, and3) How do I copy the physical 512Gb SSD to the new 1Tb SSD, so I still have the Lenovo O/S and everything else I've installed on it? I have partitioned my SSD so there is: 1 - 260Mb of a simple EFI System partition1 - 1000Mb of a Recovery partition1 - 84Gb of a Windows 10 partition1 - 391Gb of an additional partition (defined as D:\) Any thoughts would be greatly appreciated. Thanks,https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Upgrade-SSD-X1-Carbon-Gen-4/td-p/3449735
Hi It is my first post as a member of this community and I am having some issues with my laptop It is a first generation X Carbon Touch model and the machine type is -CTO Based on the serial number it is no longer under warranty PROBLEM The problem is that the computer is not booting The computer just died on me When I press the power button nothing is showing on the screen No BIOS or anything The screen remains blank and no sound is emitted from the laptop There are lights on top and these are the power LED the mute LED and the hard drive LED which is weird because I removed the hard Issue X1 Carbon drive from the computer Sometimes the hard drive LED stays off The fan comes on after a couple of minutes ATTEMPT I tried resetting X1 Carbon Issue the battery by inserting a paperclip at the bottom and X1 Carbon Issue pressing the tiny button for a couple of seconds X1 Carbon Issue I also used a minidisplay port to VGA adapter and plugging it to an external monitor Nothing shows up on the monitor I removed the battery and used the power cable directly and switched on the machine Nothing changed that is the power led and the mute led are on without any display In a desperate attempt I unplugged all the connections from the motherboard USB on the left piggyback display usb PCB on the left battery BIOS backup cell speaker connector fan connector and power connector nbsp I am thinking that the motherboard is shot and was wondering if there is anything that can be done to ensure that Also in the event that the motherboard is damaged does anyone know how much a replacement would cost The motherboard at is a rd gen Intel Core i with GB of memory nbsp I hope to get an answer Thank youhttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Issue/td-p/3368327
When I connect my carbbon mobile sometime it connects to wifi sometimes not
Hi All Is it possible to get the Hibernate option in window 10 on the X1 Carbon 2nd Gen? I have sleep, reboot and shutdown. I like to sleep the laptop so I can start work where I left it. However, I have found that it keep getting out of sleep spontaneously when its in my laptop bag. which I think is dangerous. So I am desperatly looking for a solution for this. Thankshttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Hibernate/td-p/3313469
this is stupid i got a really high performance pc specially and custom made by me for gaming... now when i try installing NFs carbon an error pops up asking for direct x 9.0c.... but i already have direct x installed anyone know how to solve this...? please respond
Do a clean install of video card your drivers.
why doesnt samson carbon 49 midi usb keyboard work with windows 8https://social.technet.microsoft.com/Forums/en-US/c1f9fee6-8361-4588-a193-2a44053c636a/samson-carbon-49?forum=w8itprohardware
HI everyone, I have a question regarding SIM in x1 carbon. I am not very good with technology, so I don`t know if my x1 carbon has a working SIM slot. It has a slot for SIM card but when I put it on, it doesn`t respond anything, like `detecting` or something like that. My question is: does x1 Carbon (Model 20A8-S00600) has a working SIM card slot. If it does, how can I make it functional. If it doesn`t what do I need to do/buy to make it functional. Thanks,Kushtrim
Go to Solution.
Hi and welcome, kushtrimYour laptop is "WWAN ready" only, i.e.has the SIM card holder, the SIM card reader and WWAN antennas installed. WWAN modem wasn't factory preinstalled, that's a cause you don't see anything once SIM card is installed.So, to use laptop WWAN capabilities, purchase and install WWAN modem - 3G or 3g/LTE.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Thinkpad-x1-carbon-SIM/td-p/2211034
Problem Wireless radio will not power on In the Access Manager Fn F clicking the Power On button has no effect on not will Carbon power wi-fi X1 nbsp Troubleshooting We have reinstalled Window x Enterprise multiple times on our X carbons to try to resolve this issue This issue affects both our batch of i 's and our batch of i 'sWhen another operating system is installed e g Kali Linux on Live USB the wireless radio works We have tried using seven of the or so versions of Intel's driver nbsp nbsp Getting the wireless radio to actually power on is hit or miss So far for all of the i Carbons it's a miss nbsp I X1 Carbon wi-fi will not power on have called Lenovo Technical support They're suggestion is to replace the wireless adapter so they're sending someone out to do that Unfortunately I'm sure he isn't going to bring enough of them to take care of ALL of the laptops that are having this problem nbsp Device manager sees the wireless adapter and I can uninstall install drivers from therehttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-wi-fi-will-not-power-on/td-p/3414620
i have a prob..
when i try 2 run NFS carbon a black screen appears and den da desktop appears....wat shud i do??? i have tried all da widescreen fixes.....and yeah in da dxdiad ti shows AGP Texture Acceleration Not Available.....plz.. help
Has it ever worked before?
Post your DXDiag report here, click Start->Run, type in 'dxdiag' without quotes, and hit OK. When the progress indicator on that program is done, click the 'save information' button, save it somewhere, and then paste it into your thread.
X Carbon -A type nbsp Hi All nbsp I used BitLocker on Win b without any problems for almost years now A month ago when I booted my computer it asked for a recovery key and since that time it was asking every boot I also noticed that the TPM module wasn't discovered any more so that's probably the reason nbsp I reainstalled Windows clean install TPM X1 Carbon issue to Windows b and I was surprised to see that the TPM is still not present Also checked in BIOS - in Security section - there are no TPM settings I've also made an upgarde of BIOS - didn't help nbsp Does this mean that my TPM somehow got broken How can I - Make sure that I had one although I'm sure I had one since it has never been asking for a password while booting the computer - Maybe there's a separate X1 Carbon TPM issue boot menu for TPM nbsp - Can I diagnose it somehow nbsp I'm so lucky with this computer - the guarantee expired months agohttps://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-TPM-issue/td-p/3370159
I have a st generation X carbon that was working just fine for three years Since March every time the processor exceeds - usage the system gets extremely hot - the base is too hot to touch and the left half overheating X1 Carbon of the keyboard also gets very hot I measured the core temperature nbsp At lt usage average core temperature degCAt gt usage average core temperature gt degCAt gt usage X1 Carbon overheating average X1 Carbon overheating core temperature gt degC nbsp I run the system on Win and I don't have any bloatware nbsp I also don't have any malware and I use my system exclusively for work I have been nbsp reporting this issue to the Lenovo Support Service Center since March with nbsp innumerable phone calls to them sending e-mail reminders chats with agents and logging complaints again and again The response I received is abysmal and they have still not solved the issue - it has been six months now The only things the support center has clearly established is that they are incompetent and unwilling to do anything to fix the matter This is despite the fact that my system is under warranty nbsp Is there anything that I can do now to fix the problem I am facing I welcome any-and-all suggestions Thank you Maha
It sounds like you need either a new fan or the old one reseated with fresh thermal paste. If it is under warranty, they should do it.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-overheating/td-p/3452653
All, Please advice an app to manage my SMS on my X1 Carbon (type 20A7) with modem Ericsson N5321 gw.Tried plenty of apps but nothing works well with all SIM cards used by me (UK - t-mobile, DE - vodafone, Italy - wind, Poland - play).Is there anything what just manage the SMS on Windows 8.1 Pro? Kind regardsmc
Dear Alternet, I have the same problem. Have you come across a solution? I have not yet found any way to send sms-text-messages :-( Best PAHS1https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2nd-App-to-manage-SMS/td-p/1740033
I have an X1 Carbon (I think it is 2nd generation, but am not sure). I have a 500 GB SSD but would like to increase this if possible. Are there larger SSDs available that fit the X1 Carbon and if yes, which one can you recommend?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Possible-to-upgrade-SSD-on-X1-carbon-above-500/td-p/3437914
I just bought a new X1 Carbon (Gen 4), and am looking for a sleeve for it. I took the Carbon especially because it's so lightweight and small, but unfortunately the offical size-matching sleeve from Lenovo (X1 Ultra Sleeve) is quite big, and weighs almost half as much as the laptop itself, and twice as much as a regular zip sleeve...I'm looking for a small lightweight neoprene/polyester/whatever sleeve with a zip in which the X1C Gen 4 would fit nicely. Any recommendations from people who already went through searching for one? Or maybe there is a basic reversible sleeve with the X1 Carbon dimensions planned from Lenovo? I'll be carrying in a backpack so I just need basic protection.Thanks!https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Gen-4-sleeve/td-p/3381440
When I disabled Secure Boot, it still showed the "Lenovo" logo, not the "ThinkPad" one (the one it normally boots up in out of the box)What could have caused this?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Why-is-my-3rd-gen-X1-Carbon-not-showing-the-quot-ThinkPad-quot/td-p/3377608
Hi nbsp Does the X Carbon with i processing machine type BS A GE have the ability to AES encrypt the nbsp Gb SSD by setting a BIOS password nbsp I wrote and nbsp called Lenovo Encryption X1 Carbon SSD 512 GB and Samsung Support and they tell me they don't know and do not assist customers with configuration matters The Samsung Magican does not work with the B B HDD like this one Nor the manual helps me further nbsp The manual just says about nbsp Encryption solid-state driveSome models contain the Encryption solid-state drive This feature helps to protect your computer againstsecurity attacks on media NAND flash or device controllers by use of a hardware encryption chip For theefficient use of the encryption feature set a hard disk password for the internal storage device nbsp I have set the BIOS password but I am not sure if the data on the SSD is now AES encrypted or only the access protected by a password nbsp In my X BS A GE there is a Samsung SM HD X1 Carbon 512 GB SSD Encryption SAMSUNG MZHPV HDGL- L Lenovo SRU X nbsp Or do I have to use Bit Locker tp protect my data If so is there a good manual how to set it up best e g use some security features of the X1 Carbon 512 GB SSD Encryption HDD nbsp Anybody out there who knows nbsp Thanks Jogi Solved Go to Solution
I believe that drive in not self-encrypting/ Please note that the BIOS password is not what is used to encrypt self-encrypting. Rather it is the ATA (hard disk) password. In any case, if you set an ATA password, it is considered uncrackable. If you have a self-encrypting drive and no ATA password, the drive can simply be moved to a different machine and read directly.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-512-GB-SSD-Encryption/td-p/3305843
When will the X1 be available with WiGig option?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-and-WiGig/td-p/3305678
Hey guys how you doing today?Here I come...I got a new X1 (207A) with 128sdd, i also have a x1 (3448) with a 256 sdd....... I want interchange the sdd on those X1s... I do have the recovery DVD that came with the new one, but none for the old one... Can you guys tell me how can I do that? Best regards...
Go to Solution.
It's not possible because the two systems use SSDs with different physical sizes. The original X1C uses an mSATA SSD but the X1C2 uses an M.2 SSD.
M.2 - mSATA Comparison
Hi nbsp i am about to buy a Carbon X Gen but since the GB PCIe-NVMe takes weeks to get shipped and it is a little cheaper i was thinking of going for the or gb SATA buying the big drive separately and doing the upgrade by myself nbsp Is this in general possible to upgrade from sata to PCIe-NVMe or do you have to go for PCIe right from the start nbsp if this is possible is one of the following SSD compatible and which one is to recommend http www amazon com Samsung- - GB-PCIe-NVMe dp B M ref sr ie UTF amp qid amp Upgrade Carbon X1 Gen SSD 4 sr http Upgrade SSD X1 Carbon Gen 4 www amazon com Kingston-Digital-Predator-SHPM P H- G dp B V C M ref sr s pc amp ie UT nbsp I know there is a chance that this question has already been answered here in the forum but I now spent quite some time and I only found the question answered for the third gen nbsp Best and thanks a lot S
Hi. I found this post from a Chinese forum, author of which have a Samsung 950PRO 512GB NVMe successfully installed, on a 20FB shipped with 192GB SATA.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Upgrade-SSD-X1-Carbon-Gen-4/td-p/3299601
Here are some Carbon Icons I just made, I will update this post as I make them!!
If you would like a specific icon included in the packs, just ask!!
the IE8 is nice..good job friend..http://www.sevenforums.com/customization/100146-carbon-icons.html
Hi,My X1 with great specs is not as good as it should be (i7, 8GB RAM, 500G SSD).2 -3 times a day it crashes (BSOD). After installing Synaptics general drivers, that's gone. But I end up with many applications not scrolling.The fingerprint is unstable. Often the light is green when logging on, sometimes still working, sometimes not working at all. Searching the internet, I find I am not alone.This is my first post on this forum.I have been using Thinkpads for something like 15 years, and mostly been proud and happy about it. X, T-series, even 770 (?). They were all very stable and usable for business use.My X1 is mediocre however.I would very much like Lenovo to do something about these issues for their flagship system.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-carbon-failures/td-p/3343246
Hi! I have a Lenovo ThinkPad X1 Carbon that is a couple of years old. I wanted more space so I bought what I thought was the right drive, a M.2 SATA III Internal SSD. Unfortunately it doesn't fit! Here's how the old drive fits in:? The new drive doesn't fit, as you can see:? Here's a side by side photo of the two (the 500GB is the one I bought):?and here's a comparison of their pinouts, as you can see the new drive is too wide to fit:?What drive would fit in this laptop, and how do I know I'm buying the right one?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/What-drive-do-I-need-to-buy-for-my-X1-Carbon-I-thought-I-bought/td-p/3456473
OK, more of the same with a few new twists. Since racing games are among my favorites Carbon will do.
I am driving the 68 Camaro. I have played enough to mod it yet but I'll have her hopped to the max before long.
Much better than Most Wanted turned out to be. This one I want to play. Most Wanted was a chore.
Finally got my new X1 Carbon up and rolling with the stock Lenovo image on the drive and have a couple of questions about some recommended updates per the Lenovo app: Recommended Updates Intel Integrated Sensor Solution (Version 18.104.22.16856) - Previous Version - None So......(1) I don't fully understand what this thing does and (2) do I need it? Based on the previous version none indicator it was not installed in the original image. Optional Updates Lenovo Power Management Driver (22.214.171.124) - this shows "no previous version installed" but under Programs and Features in windows I see that version 126.96.36.199 is installed...not sure why the Lenovo Companion app is not picking that up? Thoughts?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Recommended-Updates-Which-Ones/td-p/3326234
HI. 1) Does anybody knows, wich of these screens definitely not use PWM to control brightness? 00HN873 N AUO 14.0 FHD IPS AG00HN874 N AUO 14.0 FHD IPS AG00HN877 N LGD 14.0 WQHD IPS AG00HN878 N Panasonic 14.0 WQHD IPS AG i think the last one use pwm. Especially want to know if 00HN877 N LGD 14.0 WQHD IPS AG hase or not, and the other question, how can i ensure what screen in the notebook when buy it? can i understand it if i know part number? or may be someone knows what model i will get if order through the lenovno site? 2) is the warranty worldwide? and if i extend warranty, it is also worldwide? same rules?https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/x1-carbon-gen-4-screens-and-warranty/td-p/3328131
I bought a Sierra EM7355 card for my 3rd gen Thinkpad x1 - according to http://www.thinkwiki.org/wiki/Category:X1_Carbon_(3rd_Gen) but it doesn't work when I plug it in (won't boot up). Which card do I need? Is it the EM7345?
Go to Solution.
Hello, genealogyxieYou are right, only Sierra em7345 (LTE/3g) and Ericsson n5321 (3g) wwan modems are compatible with x1c gen3. Note, they must have Lenovo FRU p/n, 04X6014 and 04W3842, respectively.em7355 (Gobi 5000) isn't in the compatibility list.https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Which-WWAN-card-do-I-need-in-a-3rd-gen-carbon-x1/td-p/3330119