Windows Support Forum

Update Windows 10 Anniversary update-Will not install-error 0xC1900101 - 0x40017 second boot

Q: Update Windows 10 Anniversary update-Will not install-error 0xC1900101 - 0x40017 second boot

We couldn't install Windows 10
0xC1900101 - 0x40017
We've set you PC back to where it was right before you started installing Windows 10
The installation failed in the SECOND_BOOT phase with an error during BOOT operation
What was tried: Connected straight to ethernet, Turned off wireless and Defender A/V, Removing the D/L files, D/L fresh from ISO file, launched install file, went through approx 50% and PC rebooted - nor stuck on black screen with swirling dots for OVER 4 hours with a brief HD access every couple of seconds.
Rebooted again -- still swirling dots on black screen. Tried again, same results.
Rebooted with F8 to get original Win 10 back.
Turned on "metered connection" option for WLAN to stop this update from happening. But now I cannot get and security updates for this machine.
Please suspend this D/L until fixed. Cannot afford to have no protection!

http://forums.windowscentral.com/ask-question/438835-update-windows-10-anniversary-update-will-not-install-error-0xc1900101-0x40017-second-boot.html
Relevancy 100%
Preferred Solution: Update Windows 10 Anniversary update-Will not install-error 0xC1900101 - 0x40017 second boot

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 110.98%

I have a Dell XPS 18 portable all-in-one machine that came with Windows 8, then I updated it to Windows 8.1 without any problems. It caught a nasty virus and I had to restore it to factory settings, which leaves me back at Windows 8.

I have tried multiple times to install the Windows 8.1 update through the Microsoft Store but keep getting Error Code 0xC1900101-0x40017. I have tried the following but get the same result;

Ran all of Windows Updates that would come upVerified that all drivers were up to date. Note: my video driver is NOT a Nvidia but an Intel. I've seen posts stating that this driver needs to be updated in order to fix the problem.Ran Selective Start Up

I don't know what else to do at this point because I have not been able to find anything online related to my problem. Please advise if you have any suggestions. Thanks!

FYI: Antivirus running is Avast!

A:Windows 8.1 Update Error 0xC1900101-0x40017 on Dell XPS 18

Hi, many people with your problem blame Avast for preventing Windows 8.1 installation - "Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017" - Microsoft Community. You can try to uninstall Avast and run the Windows 8.1 upgrade.

Good luck, werty

http://www.eightforums.com/installation-setup/52665-windows-8-1-update-error-0xc1900101-0x40017-dell-xps-18-a.html
Relevancy 90.83%

I have a Sony Vaio 32 bit machine 4gb RAM.

It gets stuck at about 80-84% when updating then it says "Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017"

I haven't ever been able to find decent info on the actual microsoft site. I have no devices plugged in, no partitions, etc. Why is this happening! Any work arounds? Would it be better to just burn the ISO and try it that way? But isn't that supposed to be the beauty of the "store" so I don't have to do that?

A:"Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017"

Windows 8.1 upgrade reboots to black screen of 'nothingness'. - OUC1TOO - Site Home - TechNet Blogs

Error 0xC1900101 ? 0x40017 when installing Windows 8.1 - Microsoft Community








Originally Posted by Microsoft Forum Moderator


Error 0xC1900101 – 0x40017 when installing Windows 8.1


Hello,

We understand that many customers are receiving error 0xC1900101 – 0x40017 when installing Windows 8.1. This error is typically caused by an incompatible driver.



If you are receiving this error:
1.
First, please double-check the error code. There are many variations of error 0xC1900101, each with a different location code -- the error extension, located after the dash. The information in this thread is intended only for location code 0x40017. If you are receiving a different location code, these steps are unlikely to resolve your issue.

2.
Check that you’ve already updated all of your drivers. In particular, if you have an NVIDIA GeForce graphics card, make sure you’ve installed the latest Drivers - Download NVIDIA Drivers


3.
Check that you do not have any Frequently Asked Questions - What devices are supported by the SteelSeries Engine? that support the SteelSeries Engine installed on your PC. The SteelSeries Engine software is currently not supported on Windows 8.1. Please uninstall the software before attempting to update to Windows 8.1

http://www.eightforums.com/installation-setup/35312-couldnt-update-windows-8-1-0xc1900101-0x40017.html
Relevancy 89.9%

I tried installing the Anniversary update using the Media Creation tool and I get this error when I log back in after the setup reverted my installation:

0xC1900101-0x3000D
The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation

Any help would be greatly appreciated!

http://www.tenforums.com/installation-setup/59571-anniversary-update-error-0xc1900101-0x3000d.html
Relevancy 88.97%

Windows will not update to by any method Updates always complete to then revert Computer is a Dell Vostro Background The computer never appeared to update automatically but there was never any error code I tried Anniversary 0x20017 - with error fails update 0xC1900101 to use the Windows upgrade assistant The upgrade would go through download and install to but then restart back to Anniversary update fails with error 0xC1900101 - 0x20017 version with no error message Finally I downloaded the iso extracted it to my hard disk and installed from there Again the update went to and then reverted back to but this time it gave the error message xC - x quot The installation failed in the SAFE OS phase with an error during BOOT operation quot I have found several threads about this error and it seems most likely that there is a driver conflict of some kind I have looked at the setuperr log from WINDOWS BT Sources Panther directory but I do not see what is causing the error Can anyone help with guidance on this setuperr log text - - Error CONX Windows Compat Appraiser Utilities SendRequest Failed to connect to the internet or send request gle x ee - - Error CONX Windows Compat Appraiser Utilities ResolveForwardLink Failed to send request using default proxy gle x ee - - Error CONX Windows Compat Appraiser Utilities SendRequest Failed to connect to the internet or send request gle x ee - - Error CONX Windows Compat Appraiser Utilities ResolveForwardLink Failed to send request using auto proxy gle x ee - - Error CONX Windows Compat Appraiser Utilities ExtractCosConnectionString Failed to resolve forward link x ee gle x ee - - Error CONX Windows Compat Appraiser CosDeviceDataSource refetchData Could not resolve COS FwLink x ee gle x ee - - Error x b MIG Can't retrieve group information for user IIS APPPOOL DefaultAppPool NetUserGetLocalGroups failed x AD - - Error SP pSPRemoveUpgradeRegTree failed to delete reg tree HKLM SYSTEM Setup Upgrade gle x - - Error x b MIG Can't retrieve group information for user IIS APPPOOL DefaultAppPool NetUserGetLocalGroups failed x AD - - Error x MIG CSIAgent Invalid xml format FormatException quot id quot attribute is mandatory void cdecl Mig CMXEMigrationXml LoadSupportedComponent class UnBCL XmlNode int class Mig CMXEMigrationXml class Mig CMXEXmlComponent - - Error CSI F Error Facility FACILITY STATE MANAGEMENT Code from CWcmScalarInstanceCore GetCurrentValue options x status quot null quot value type x a c bytes x c e d gle x - - Error CSI F Error Facility FACILITY STATE MANAGEMENT Code from CWcmScalarInstanceCore GetCurrentValue options x status quot null quot value type x a c bytes x c e d gle x - - Error x b MIG Can't retrieve group information for user IIS APPPOOL DefaultAppPool NetUserGetLocalGroups failed x AD - - Error x MIG CSIAgent Invalid xml format FormatException Component with display name Plugin C EC F- F - CE -AF - A FA already loaded cdecl Mig CMXEMigrationXml CMXEMigrationXml class Mig CPlatform class UnBCL String class UnBCL XmlDocument class UnBCL String class UnBCL String - - Error x fe MIG Plugin D C- A- b -AD -DCE D CD C shmig Failed to get preferred homegroup with hr x - - Error CSetupAutomation Resurrect File not found C WINDOWS BT Sources Panther automation dat gle x - - Error SP CSetupPlatform ResurrectAutomation Failed to resurrect automation x gle x - - Error x b MIG Can't retrieve group information for user IIS APPPOOL DefaultAppPool NetUserGetLocalGroups failed x AD

http://www.tenforums.com/windows-updates-activation/64663-anniversary-update-fails-error-0xc1900101-0x20017.html
Relevancy 86.18%

Hi this is my first post so I apologize in advance for any naivete Right so I've been using Windows home without much issue for months Anniversary More! 0xC1900101-0x4000D Windows Update 10 and BSOD now and I decided to do the anniversary upgrade All is well until it gets to at which point I blue screen with error xC - x D Windows 10 Anniversary Update BSOD 0xC1900101-0x4000D and More! - The installation failed in the SECOND BOOT phase with an error during MIGRATE DATA operation This started me off on a long and frustrating journey over the last three days desperately trying everything I could find online to fix the issue but I'm at the point of giving up so I figured maybe some kind soul would aid me online Thing's I've tried thus far that I can remember - it's been a lot Doing the anniversary upgrade from windows updateDoing the anniversary upgrade via the windows upgrade assistantDoing the anniversary upgrade via ISODoing the anniversary upgrade via ISO from bootable USBReinstalling not fresh Windows which yields bsod xC - x C - The installation failed in the SAFE OS phase with an error during APPLY IMAGE operation Ran chkdsk which fixed a couple corrupt files but didn't solve the problemRan sfc which reported no errorsUpdating every driver I could using DriverMax to identify out of date drivers but not to install them Ran driver verifier with all options but low resources simulation on all non-microsoft drivers which causes a bsod before it gets to login DRIVER VERIFIER DETECTION VIOLATION I have the minidumps of this attached the latest but have been unable to identify the culpritall these things multiple times plus probably a whole load of other stuff i'm too fried to remember atm Other information that may be useful Desktop I built years agoWindows Home ASUS P P -M Pro MotherboardIntel i KZotac Nvidia GeForce ti x GB DDR mhz RAM GB SSD which holds primarily the OS has GB free atm GB HDD which holds everything else notably my user folder This computer has had stability issues for years now which has caused me boundless frustration both application crashes and BSODs however they happen infrequently enough to live with and seem to be utterly and completely unpredictable This is a whole other can of worms that I don't think is related to the issue at hand Although I've been trying tons of things these past few days as far as I know I've not quot cluttered quot my OS in the process I think it's in a relatively stable clean state as it stands If anyone's willing to take a crack at this headache of mine I'd be infinitely appreciative

A:Windows 10 Anniversary Update BSOD 0xC1900101-0x4000D and More!

Ran the DM Log Collector - attached is the result.

http://www.tenforums.com/bsod-crashes-debugging/64677-windows-10-anniversary-update-bsod-0xc1900101-0x4000d-more.html
Relevancy 81.22%

I tried to install the Anniversary update using the Media Creation tool and it reverts back and displays this error when I login:
0xC1900101-0x3000D
The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation
Any help would be greatly appreciated!

http://forums.windowscentral.com/windows-10/434988-anniversary-update-0xc1900101-0x3000d.html
Relevancy 102.77%

I am downloading the update manually. Have others had the same issue with windows update not showing the update?

I'm not sure my WU is working because of this.

A:Windows Update does not download and install the anniversary update.

Originally Posted by Alicia J


I am downloading the update manually. Have others had the same issue with windows update not showing the update?

I'm not sure my WU is working because of this.



Have you tried this - https://support.microsoft.com/en-gb/...setting_client

Recommended today by another forum member - may just work

http://www.tenforums.com/windows-updates-activation/58588-windows-update-does-not-download-install-anniversary-update.html
Relevancy 98.47%

Can anyone help me with this error? I get it every time when trying to get version 1607. I have checked many times; this is not related to any drivers but to something I do not understand. Here are included my Panther and Rollback folders.
Sources.zip - Google Drive

http://www.tenforums.com/installation-setup/61724-windows-10-anniversary-upgrade-error-0xc1900101-0x20017.html
Relevancy 96.75%

I've downloaded the update for my laptop through windows update 3 times now. Each time it completes download, then restarts, configures updates, then gives me the notification: "We couldn't finish installing updates" Following that, a check of my update history shows no failed attempt or any reference to the update being downloaded. There is not at any stage an error code.
I have run the Windows Update Trouble Shooter with no result.
Any ideas will be welcome.

(I have a monthly isp download limit of 10 gb and with the speed i get it takes 4 hours to download the update so it has to be done after midnight so it doesn't count against the download limit )

A:Anniversary update won't install - no error code

Hi, download the ISO manually and create a bootable medium (which is useful in various circumstances).
(How - where- see the Tutorial section or search the net- not difficult).

That way you download once and can retry and have it available for other purposes. Also you avoid issues with Windows update.

From an admin command prompt
[Windows key + X, click command prompt (admin)]
chkdsk C: /F
Your PC will need to restart.
Make sure the result is clear or fixed.
Post back the result, which you can get after a restart as follows:
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!

Disable any AV. Disconnect any devices you don't need. Uninstall any program that affects or modifies your GUI.

Do a clean boot then try the upgrade using the Win 10 DVD/USB.

If it fails again, you can have a look at the log:
Windows Update logs are now generated using ETW (Event Tracing for Windows).
Please run the Get-WindowsUpdateLog PowerShell command to convert ETW traces into a readable WindowsUpdate.log.

For more information, please visit http://go.microsoft.com/fwlink/?LinkId=518345

Good luck!

http://www.tenforums.com/windows-updates-activation/61582-anniversary-update-wont-install-no-error-code.html
Relevancy 96.32%

Error with windows update, trying to install the November update of windows 10

0xC1900101-0x40017
The Installation failed in the SECOND_BOOT phase with an error during BOOT operation.

I have done the DISM stuff the SFC stuff and even did a full CLEAN install of windows 10 losing all my programs and that's how i got the error i listed above. I downloaded the patch using the Windows Media tool as the windows update wont seem to download it and say it will try again later. It always seems to fail on one of the restarts.

Any Idea how to get the November update installed? Oh and now some of my programs are saying im missing MSVCP100.dll and trying to go to the download page at Microsoft just says try again later.

http://www.tenforums.com/installation-setup/44814-0xc1900101-0x40017-installation-failed-second_boot-phase.html
Relevancy 95.89%

Hello all.
Running windows 10 pro 64 bit.
I've updated from Version 1511 to the anniversary update, 1607.
Or at least, I thought I did.
The update went well, no hiccups, no errors. Used windows update, let it downloaded and install and rebooted. Alas, system still shows OS Version 1511.
Used update again, same thing, rebooted, 1511.
Went to the windows site, downloaded the windows10upgrade9252.exe, ran it, same exact issue, rebooted, still showing version 1511.
Error logs show no issues. Disabled all external drives, turned off anti-virus, etc, repeated, rinsed, rebooted, still version 1511.
Only think I've not done is burned an ISO to DVD and updated from that.
Any clues as to what's going on?
Thanks!
Nelson Davis

A:windows 10 update from version 1511 to 1607 anniversary update - does not update

Can you check to see what OS version you have? Check in settings > system > OS build. It should show something like 14393.5 or 14393.10

http://forums.windowscentral.com/windows-10/434091-windows-10-update-version-1511-1607-anniversary-update-does-not-update.html
Relevancy 95.89%

After the second boot on the updating screen, the one with the spinning thing. When it gets to 83%, my screen just freezes out of nowhere. I tried switching off and back on again but it reverts back to my previous version of Win10. I tried getting Microsoft Support to help but their service wasn't all that great and I wasn't too happy with them. So I'm calling on you guys to help me out.

A:Tried to install Anniversary Update but it fails by error 0xC1990. Please help me?

Welcome!
Please consider joining us here at Windows Central as a valued member.
Here's a recent WC article that may help you: Windows 10 Anniversary Update common problems and how to fix them | Windows Central

http://forums.windowscentral.com/ask-question/434591-tried-install-anniversary-update-but-fails-error-0xc1990-please-help-me.html
Relevancy 93.74%

Product Name: HP Envy 15-j122txPre-installed OS: Windows 8.1 New clean OS installation : Windows 10 pro  I have bought Samsung 850 pro 1 TB SSd  for my hp envy notebook.I am going to replace an old 1TB HHD by a new 1TB SSD Samsung 850 EVO on my HP Envy Touchsmart 15 j122TX. how to installing the SSD on my HP plus clean installation of Windows 10 pro, setting up the OS to ensure a smooth performance? Please give me step by step instructions as I am un-experienced. Thank you for your support.  MY notebook has 24 msata SSD install can I use msata with my new SSD after the clean installation of Windows 10 pro?    

A:install windows 10 anniversary update on SSD

Here is the Service Manual: Manual Pages 41-47 show removal of the service bay door and replacement of the hard drive. Just install the SSD in place of the hard drive. You can remove the mSSD drive. It is not useful with a main SSD drive. It was designed only to speed up a regular mechanical drive.  Do you have a Windows 10 installation disk? You can download an image file and create a Windows 10 DVD or thumb drive installation media from the Media Creation Tool Microsoft webpage.  Post back so I can see if you are with us here. We can take this a bit at a time rather than my writing War and Peace and you not understanding something. 

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/install-windows-10-anniversary-update-on-SSD/td-p/5797741
Relevancy 93.74%

When trying to do the update I am told that my version is 10586 and that I need to be at 14393. I tell it to go ahead and do the update and it gets to 2% and then it tells me something went wrong and gives me error code 0x80070005.

A:Windows 10 anniversary update won't install

I know this is odd, but I saw this on another site and it has worked for me on 2 computers so far. Click on the anniversary update, let it check your system and then let it download the update. As soon as it starts to update, disconnect the wireless or LAN. It was able to update after this. Once it got past this section, I connected to the wireless again. About to do this with my 3rd computer. None were able to update before.

http://forums.windowscentral.com/windows-10/434145-windows-10-anniversary-update-wont-install.html
Relevancy 93.74%

Hello all,

Need some help... I had Windows 7 Ultimate on my pc then, I got the free copy of Windows 10 per Microsoft.
My system now is Windows 10 Pro version 1511 OS build (10586.633)
The anniversary update fails every time..... things that I have tried:
completely pause (stop) Norton Anti-virus
completely pause (stop) Malwarebytes
Clean boot

I build this pc about 5 yrs ago, never had a problem; here are the specs:

Intel i7 CPU 930 @ 3.0 ghz
12gb DDR3
Windows 64 bit
256 gb SSD drive for OS
2 tb drive for data

Any help will be appreciated;

Thanks

http://www.tenforums.com/windows-updates-activation/68575-cannot-install-windows-10-anniversary-update.html
Relevancy 92.88%

First of all, I'm coming from Windows 7. I'm one that was able to upgrade to Windows 10 for free.

Am I able to perform a clean install of Windows 10 using the same license I currently have on Windows 10? How would I obtain my current key, then? Is it s imply the Product ID listed under Control Panel>System ?

Can I download a copy of the installation media which already contains the AU update?

How would I install Windows 10 onto a M.2 drive? Is it as easy as picking the hard drive to install Windows on during setup?

A:How do I clean install Windows 10 Anniversary Update?

You could just use "reset my pc".

Alternatively, create bootable usb stick or dvd

Windows 10

Boot from it, choose custom install, delete all partitions on drive you want to use (backup data first of course), and skip key entry as not needed as you have already upgraded.

http://www.tenforums.com/installation-setup/63301-how-do-i-clean-install-windows-10-anniversary-update.html
Relevancy 92.88%

JOHN_COMPUTER-07_08_2016_191929_84.zipI'm having trouble installing the Windows 10 Anniversary Update.

The installation of the update seems to get to about 75% complete, then I get a BSOD.

Then the update system automatically rolls back my Windows installation to the pre-Anniversary Update version.

Not sure what is causing the problem.

Using dm_log_collector produces an empty zip file which is attached.

Thanks for any help.

If any other files needed please state and will attach.

http://www.tenforums.com/bsod-crashes-debugging/59240-bsod-during-install-windows-10-anniversary-update.html
Relevancy 92.88%

I've having trouble installing the Windows 10 Anniversary Update.

The installation of the update seems to get to about 70% complete, then I get a BSOD saying "kernel security check failure".

Then the update system automatically rolls back my Windows installation to the pre-Anniversary Update version.

Not sure which driver is causing the problem. Hopefully, the attached logs will help to narrow down the problem.

Thanks for any help.

http://www.tenforums.com/bsod-crashes-debugging/58437-bsod-during-install-windows-10-anniversary-update.html
Relevancy 92.88%

I have an xps desktop Will windows find most of the drivers If I enter my service tag and go to drivers Anniversary Windows have to If 10 do to a I install update... clean will all the drivers that I need be there I had an old Dell with Windows XP I did a clean install on it once I think there was one device that was listed as unknown I put in the dell driver disk and it install most of the missing drivers I needed If I have to do a clean install to Windows 10 Anniversary update... as I recall But you no longer get disks with Dell computers Is there a place to download a drivers disk If I open Macrium Reflex it shows If I have to do a clean install to Windows 10 Anniversary update... that there are partitions One is the c drive one is PBR Image one is wintools I think What are the other They must be Dell partitions as I never created any partitions I looked up the model number of my harddrive and it appears to be a standard hard drive Somebody said that there could be a small SSD that is used to help the other drive boot faster If there was such a drive wouldn t I see if I opened Optimizer Or in Macrium Reflect The model number of my harddrive is WD EZEX

A:If I have to do a clean install to Windows 10 Anniversary update...

Macrium just finished the backup, so I just checked and there are 7 partions
1. ESP
2.DIAGS
3. None - unformatted 128/128 (must be a windows thing as my second drive that I added has this too)
4. Winretools
5. OS (C)
6. None- primary 334.2/450
7. PBR Image

http://en.community.dell.com/support-forums/desktop/f/3514/t/19990137
Relevancy 92.45%

Hey I've tried to install the Win Update via the Windows Store and got Error 0xc1900101 Win8 during 0x30018 - -> restore update the xc - x several times after the PC restarted at the ending of the update I know that several users solved this with disabling drivers so I did some suggestions I've found Disabling AV Kaspersky Disabling LAN Controllers Uninstalling DAEMON Tools TuneUp -- gt DISM exe Online Cleanup-image Restorehealth -- 0xc1900101 - 0x30018 Error during update -> restore Win8 gt sfc scannow nbsp -- gt wsreset exe Trying to repair Windows Update itself via quot WindowsUpdateDiagnostic diagcab quot Disabling AIDA Disabling all components from my ASUS motherboard some other things 0xc1900101 - 0x30018 Error during update -> restore Win8 I can't remember For your information I don't want to install Windows from scratch as I have too many programs and I never had problems with installing an OS for this system Win Win Thanks for the help UpdateLog - - f Handler Deleting setup file ' winblue refresh - x fre client Professionalwmc gdr de-de-IR CPWMCA X FRER DE-DE ESD esd' - - f Handler Installer completed Process return code x result x callback pending true - - f Handler - - f Handler END Handler Windows Setup Install - - f Handler - - AU Preventing expiration of polled reporting events until next restart - - Agent - - Agent END Agent Installing updates CallerId WSAcquisition - - Agent - - Report REPORT EVENT FFACF E-F - F-A - F D - - AGENT INSTALLING PENDING C EC - BED- - E -D BE F D WSAcquisition Success Content Install Installation pending - - Report WARNING CSerializationHelper InitSerialize failed x - - Report WARNING CSerializationHelper InitSerialize failed x - - Report CWERReporter finishing event handling - - Report WARNING CSerializationHelper InitSerialize failed x - - EP Got CAB D- B - B A-A C- D DBEE redir Client Server URL quot consoreds fe ws microsoftconsored v ClientWebService client asmx quot - - PT WARNING Cached cookie has expired or new PID is available - - EP Got CAB D- B - B A-A C- D DBEE redir Reporting URL quot consored statsfe ws microsoftconsored ReportingWebService ReportingWebService asmx quot - - Report Uploading events using cached cookie reporting URL consored statsfe ws microsoftconsored ReportingWebService ReportingWebService asmx - - Report Reporter successfully uploaded events - - Shutdwn Checking to see whether install at shutdown is appropriate - - Shutdwn user declined update at shutdown - - AU AU initiates service shutdown - - AU AU Uninitializing Automatic Updates - - WuTask Uninit WU Task Manager - - WuTask ScheduledInstallTaskHandler setting scheduled install attempt time to - - - - Agent Sending shutdown notification to client - - Agent Sending shutdown notification to client - - Agent Sending shutdown notification to client - - Agent Sending shutdown notification to client - - Agent Sending shutdown notification to client - - Agent Sending shutdown notification to client - - Agent Sending shutdown notification to client - - Agent Sending shutdown notification to client - - Report CWERReporter finishing event handling - - Service - - Service END Service Service exit Exit code x - - Service - - c Misc Logging initialized build tz - - c Misc Process C WINDOWS system svchost exe - - c Misc Module c windows system wuaueng dll - - c Service - - c Service START Service Service startup - - c Service - - c Agent WU client version - - c Agent Base directory C WINDOWS SoftwareDistribution - - c Agent Access type No proxy - - c Service UpdateNetworkState Ipv cNetworkInterfaces - - c Service UpdateNetworkState Ipv cNetworkInterfaces - - c Agent Network state Connected - - c Service UpdateNetworkState Ipv cNetworkInterfaces - - c Service UpdateNetworkState Ipv cNetworkInterfaces - - c Agent Agent Initializing global settings cache - - c Agent Endpoint Provider - - - - - - c Agent WSUS server lt NULL gt - - c Agent WSUS status server lt NULL gt - - c Agent Target group Unassigned ... Read more

A:0xc1900101 - 0x30018 Error during update -> restore Win8

I fixed it with these things:

1. Uninstalling DAEMON Tools, TuneUp
2. via CMD (as admin) -> DISM.exe /Online /Cleanup-image /Restorehealth
3. Disabling Intel LAN, Azalia Audio, USB 3.0 via BIOS

https://social.technet.microsoft.com/Forums/en-US/1e1adbc5-b78e-4b2a-9661-4139d13cc7d3/0xc1900101-0x30018-error-during-update-gt-restore-win8?forum=w8itproinstall
Relevancy 92.02%

I have a problem after installing the Anniversary Update of Windows This post concerns the process which involves a clean re-install of Windows by the method which includes downloading and running Microsoft's Media Creation Tool choosing quot Create Media for another PC quot This downloads an ISO of Windows which when put on a USB stick can be used to boot the computer and clean-install Windows of Install 10 Anniversary Clean including Update Windows no license key required because Windows was already running although I have my license key I am told that this produces Clean Install of Windows 10 including Anniversary Update a quot very clean quot install which would clear any glitches in the previous Clean Install of Windows 10 including Anniversary Update install Programs would need to be re-installed My question please assuming that the Media Creation Tool will be downloaded after the Anniversary Update was installed will it produce a Windows Anniversary Update version Thanks for any help PS I wasn't able to create a Macrium System Image which would include the Anniversary Upgrade because my problem occurred immediately after the Update If you are interested in what that problem is go to http www tenforums com installation-setup -anniversary-update-search-not-working-properly Clean Install of Windows 10 including Anniversary Update html

A:Clean Install of Windows 10 including Anniversary Update

I used the MCT tool this morning and i can assure you its the 14393 build. You will find some windows updates waiting at the end of it.

http://www.tenforums.com/installation-setup/58608-clean-install-windows-10-including-anniversary-update.html
Relevancy 92.02%

Windows Anniversary Update Might Hide Partitions After Install One of the issues experienced by Partitions 10 Windows Install Might After Update Hide Anniversary users after installing the Windows Anniversary Update concerns partitions as many of those who upgraded their computers reported that a number of partitions Windows 10 Anniversary Update Might Hide Partitions After Install disappeared from File Explorer Furthermore all partitions show up as RAW in Disk Management which makes most Windows 10 Anniversary Update Might Hide Partitions After Install people believe that all their data has been removed and nothing can be recovered Microsoft however claims that this is just a bug discovered in the Windows Anniversary Update install system and while no files are lost it s critical for users not to try to recover anything with third-party apps because this could lead to completely breaking down the partitions and removal of data Microsoft is aware of this issue and is working on a solution to be released through Windows Update Any data you have stored on the affected partition is still there We recommend that you not try to recover or otherwise write data to the affected partition nor should you format the partition the company says You can also downgrade in the meantime Microsoft s Sharath Srinivasa Windows 10 Anniversary Update Might Hide Partitions After Install goes on to explain that a patch will be released to users when it s available and states that users who do not want to wait for it can always downgrade to their previous Windows version Partitions should be then just as you created them with all files once again accessible For the moments there s still no timing on when exactly the new patch could land but since the company is already aware of the bug and working on a fix it should take too long before it gets the green light The Anniversary Update is currently available to Windows users free via Windows Update and the release takes places in stages so more people could experience the bug as they complete the upgrade For the moment Microsoft says that it has received only a small number of reports pointing to this bug so not too many people might be losing their partitions after installing the Anniversary UpdateClick to expand nbsp

https://malwaretips.com/threads/windows-10-anniversary-update-might-hide-partitions-after-install.62294/
Relevancy 92.02%

I have windows 10 installed on Lumia 1020 with no problems very happy with it just wanted to know if anniversary update could be installed thank you.

A:can windows 10 anniversary update install on lumia 1020

Originally Posted by Windows Central Question I have windows 10 installed on Lumia 1020 with no problems very happy with it just wanted to know if anniversary update could be installed thank you. It can: [Guide] Installing Redstone on Unsupported devices (X2X Series)
Your phone already got Windows 10 last Threshold, so it could do that in the shortest way (see forum: )
" Windows 10 Mobile 1) Any Nokia Lumia X2X Series (with and without SD card) running the below OS versions 10586.10710586.545
Users who're on these versions can get Redstone in a much simpler way. You can stop here. 2) Files needed a) InteropTools v 1.8 - Here b) DHTUpgrade Advisor - Here 3) Go to developer options and enable developer mode. After that, a) Copy the appx files from "Dependencies" and "InteropTools_Beta_1.8_0.0.160.0_arm.appxbundle" to your phone and install them. b) Now open InteropTools (beta) >> goto "INTEROP UNLOCK" section >> toggle on the Restore NDTKSvc. 4) Now similarly install the files from "DHTUpgrade Advisor" and "Dependecies" via file explorer. a) After installing, Open DHTUpgrade Advisor, select backup and then choose "Allow Update 512MB devices" or "Allow Update" b) Crosscheck if your device info details are changed or not in the "About" tab. If not, reboot your phone. 4) Go to windows update and check for updates. a) If the update isn't offered, then install "Upgrade Advisor" via Windows Store. After installing it, open the app and follow the required steps. b) Once again, go to windows update and check for updates. 5) Enjoy Redstone on your device.
"

http://forums.windowscentral.com/ask-question/437605-can-windows-10-anniversary-update-install-lumia-1020-a.html
Relevancy 91.59%

Hello out there,

since seven days i try to update my system to WIN8.1. from the first try i get the errorcod 0xc1900101 - 0x30018.
I have already made a reinstallation of WIN8 and deinstalled everything exept the networkdriver. Allways get the same message. The installation seems to work fine till deviceconfiguration 64%. Then it restarts and sets back to WIN8.
My system is Satellite Pro C870 -1EJ
Need some help, or better an solution.

THX

verzweiflix

A:Satellite Pro C870 - Win8.1 update - Error 0xC1900101 - 0x30018

Just solved it myself,

and for anyone else with the same Problem.
It has been the Catalyst suite. Just deinstalled it and voila
It now works.

https://forum.toshiba.eu/showthread.php?74738-Satellite-Pro-C870-Win8-1-update-Error-0xC1900101-0x30018
Relevancy 91.16%

Search Results

I am trying to update from Windows 10 OS Build 10586.589 to the Anniversary Update but my computer freezes at 1% progress. I have tried everything I can think of including: Unplugging all extra SATA drives except my main SSD, unplugging my wireless network adapter, unplugging all USB devices (even mouse and keyboard), removing old drivers and updating outdated ones, and installing the update through a USB flash drive. It always gets to the same part and freezes until I shutdown my computer and lose no data.

You can see pictures of the frozen screen here: http://imgur.com/a/PseoH.
Reddit thread (Took the guys advice on there): Windows 10 Anniversary Update Freeze : Windows10
Hopefully someone can give me some guidance on how to fix this as I've tried everything I can think of. Thanks!

Motherboard: Asus M5A97 R2.0
CPU: AMD FX-8320 (OC)
GPU: EVGA GTX 750 SC OS
SSD: Samsung 840 EVO 120 GB SSD

http://www.tenforums.com/windows-updates-activation/63726-cannot-update-windows-10-anniversary-update-freeze-during-update.html
Relevancy 90.73%

Hi I have a Packard Bell OneTwo S It 10240 10 build Can't Anniversary on install update, stuck Windows came factory installed with W I upgraded to W last year after difficulty - upgrading to W via Windows update would Can't install Windows 10 Anniversary update, stuck on build 10240 not work kept installing to a certain percentage then would reboot to a blank screen and freeze indefinitely I needed Can't install Windows 10 Anniversary update, stuck on build 10240 to power off Can't install Windows 10 Anniversary update, stuck on build 10240 then on restart it would roll back to W This happened repeatedly despite trying all sorts - clean boots uninstalling antivirus and updating drivers etc I finally installed W using Media creation tool Everything ran fine But when the big update came in Novmember that failed to in the same way as above however all other monthly windows updates install fine Windows update never tried to push the Nov update on me again - I'm still on build now I was prompted to install the anniversary update by Windows update last week but that also failed in the same way as above Download ok and begins installing fine then at some point after complete I get the blank screen indefinitely and have to power off then it reverts back to W build Having checked Packard Bell website my model is not supported by Packard Bell for W and they are not providing any drivers for it This may explain the problems Can anyone suggest how to find out what the problem is and if there is a solution I've tried looking in Update history for error codes but there is none it doesn't even show an attempt to install the anniversary update Like i said every other monthly update since last year installs fine its just the big builds that won't Thanks

A:Can't install Windows 10 Anniversary update, stuck on build 10240

Hi, simplest answer is avoid windows update and create the appropriate bootable medium or iso and use it as you did before.
As you know plenty of people have this sort of problem.

Note that the upgrade can introduce new issues for some (search the net), and some are delaying because of that. Older machines like yours could well exhibit such problems. So before you make this change, I recommend you create a disk image of your existing setup - a procedure you should do routinely anyway- to give another way of restoring your system.
E.g. Macrium Reflect (free) + its boot medium + external storage for images.

It's best to have a physical bootable medium as it covers all of:
a. if you need to repeat the installation
b. as a bootable medium for recovery options
c. in case you need to do an in-place upgrade repair install

without taking up disk space.

http://www.tenforums.com/windows-updates-activation/61022-cant-install-windows-10-anniversary-update-stuck-build-10240-a.html
Relevancy 90.73%

Hello,I recently purchased a new 2016 model Spectre x360 (PN X7V20UA). It came running Windows 10 1511, and I would like it to be running 1607 (Anniversary Update). However, the update to 1607 is not being offered inside of Windows Update. I've installed everything that was available, include today's November patch releases, to no avail. Windows Update shows "Your device is up to date." This link http://arstechnica.com/gadgets/2016/10/hps-new-spectre-x360-is-probably-the-best-pc-laptop-around/ says that the 1607 update is being blocked on this model temporarily due to driver compatability issues. I tried to get confirmation from HP twitter support about if this was true or not, but wasn't able to get much help. Can someone please confim this?

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/2016-Spectre-x360-Won-t-Install-Anniversary-Update-Windows/td-p/5841038
Relevancy 90.73%

I have tried multiple times times to install the Windows 10 Pro, Anniversary Update to my desktop computer, a Dell Inspiron 560. Every time, the result has been a computer that will not start-up, ie. Windows does not appear to load/run. I have tried the WURepair tool and tried to repair the System Registry HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Windows NT>ProfileList, all to no avail. I have had to restore my system with an previous Image to get it operational again. Has anybody else had this problem and been able to come up with an answer?

A:Trouble trying to install Windows 10 Anniversary Update, version 1607

Hello JRAllen72653 Welcome to the Ten Forums!

One advice I can provide here would be to try a different method for either update by upgrade or planned clean install which doesn't seem to be what you have been looking for. When the Redstone 1 update didn't even arrive here for 3 separate desktops as well as a recently new laptop where 10 came already on not seeing the update still lead to fail of the MC Tool to see the immediate online upgrade take place or create the usb media needed.

Twin solutions were then sought! The first in order to see all machines updated was to download the "windows.iso" by way of the MC Tool which equals both the 32bit and 64bit flavors for both the Home and Pro editions. We call that a "4 in 1" type of download that covers everyone.

The second item on the agenda did opt to use a 3rd party program not the Windows option to mount the iso downloaded onto each machine or run from a flash drive where the setup.exe main executable would be manually started to watch each upgrade install take place. Once all systems were set which included one desktop only lately being upgraded from 7 Home Premium to 10 Home and then still waiting for the update to go on before return to owner was to visit a MS download iso type page to grab both the 32bit and 64bit smaller Dual Edition iso downloads to keep onhand.

For a final fix to all older already made up flash drives for the Threshold 2 update last November as well as for Windows Insider Preview builds were wiped almost but not all by overwrite of the older files and folders with the newer by extraction from the RS1 update's own iso file to update the usb media.

Now after download of the RS1 that might have been the first move in order to boot live from usb media for either upgrade or clean install depending on preference. The iso mounting however did work out here as another alternative option to the WU.

http://www.tenforums.com/installation-setup/60277-trouble-trying-install-windows-10-anniversary-update-version-1607-a.html
Relevancy 90.73%

I just installed the Windows 10 anniversary upgrade.Wneh I tried to Scan a document, selected document scan, it tried  for a while and came up with the following error: Request to capture Moment failed with new HPPC_RESULT value as [1.829.88a.0] (GET_FRAME_TIME_OUT) I installed the Sprout Workstation update to no avail, I still get this error, cannot scan documents.Any idea Guys??? Thanks,

http://h30434.www3.hp.com/t5/Sprout-by-HP/Error-after-Windows-10-Anniversary-update/td-p/5726242
Relevancy 89.01%

I've wanted to download an app called Clamour, but I need a newer version of Windows Phone 10. I am part of the insider preview, and have searched for updates, however, I have no updates waiting yet. I thought the update rolled out to the Lumia 950. Has it not yet or am I missing something?

http://forums.windowscentral.com/ask-question/440677-how-exactly-can-i-update-my-lumia-950-windows-phone-10-anniversary-update-14393-0-a.html
Relevancy 89.01%

Since I updated my Dell Inspiron to the Windows Anniversary edition boot Windows close unless I open and Inspiron 5559 Anniversary Update won't lid 10 after I ve come up with two problems The first was that it the laptop would automatically restart if Shut Down was selected with no possibility of really shutting down This was solved by Inspiron 5559 won't boot unless I close and open lid after Windows 10 Anniversary Update turning off the nbsp Fast Startup nbsp in power options Now it takes too much time considering I m using a SSDThe second one is still unresolved and it is that nbsp the laptop freezes every time I turn it on at the Dell logo and the only way of making it boot is by closing and opening the lid again nbsp After that it boots normaly nbsp I ve tried different power options with no success Power troubleshooter doesn t detect anything It also happens with no usb devices attached I don t know if it is sofware or hardware related Any ideas UPDATE I ve formatted and installed windows again and the problem persists so It s definetly hardware or BIOS

A:Inspiron 5559 won't boot unless I close and open lid after Windows 10 Anniversary Update

small_eee,When you installed Windows 10 did you install the Windows 10 Drivers for the computer? If not, click the link below to download. If the drivers were loaded you may want to run the diagnostics on the computer to check the hardware. Below is information to run the diagnostics.Unplug all devices from the computer.The Dell Inspiron 5559 is shipped with the Dell™ Enhanced Pre-boot System Assessment (ePSA) diagnostics. ePSA has been significantly improved with a view to streamline the entire diagnostic process. Enhancements include simultaneous testing on multiple devices, automatic execution that can be interrupted to allow interactive test selection, and an intuitive graphical user interface (GUI).Launching the Dell ePSA DiagnosticsDuring the boot process, ePSA is accessed from a cold boot by pressing the power button on and repeatedly tapping <F12> until the BIOS Boot Menu appears on the screen. Use the Up and Down Arrow keys to select Diagnostics on the menu, and then press <Enter>.Testing Devices using ePSAePSA begins by checking an area in the system memory to ensure it is safe, and then loads itself into the verified memory area. Then, ePSA automatically begins high-level algorithms on all system memory to ensure integrity.ePSA starts running the quick test without waiting for user input. To select a specific device to test, users can tap the Esc key to abort testing. Then click on the right-arrow on the bottom right of the screen. A NOTE indicates important information that helps you make better use of your computer. NOTE: The Touchpad/Mouse will not function when the test is in progress. This is as per design.Make sure there is a cd/dvd in the optical drive when running the diags on the device.List of Specific DevicesThe following list shows the devices that can be tested using ePSA. Click on a specific device, press the play button to run the test.Cables PCIe Bus LCD/Display Panel Test Speaker Hard Drive CDROM Drive OS Boot Path USB Devices Integrated Webcam Video Card CPU Fan Processor Memory System Management

http://en.community.dell.com/support-forums/software-os/f/4997/t/19993867
Relevancy 89.01%

Hello,

My DU meter stopped reporting and collecting data after the 10 Anniversary Update. As you can see from the first screen shot my taskbar used to display the upload/download speeds but now it's just black

I tried reinstalling DU meter but no luck.

Win10 Anniversary update x64
Intel Graphics
4 GB Ram

A:Windows 10 Anniversary Update and DU meter Reporting Error

Hi, installed v7.15 on my 64 bit anniversary upgrade Win 10 Pro.. DU meter works, which suggests no intrinsic incompatibility. Which version have you got installed?

http://www.tenforums.com/software-apps/59288-windows-10-anniversary-update-du-meter-reporting-error.html
Relevancy 89.01%

I have HP ENVY x360 - 15-u483cl which worked perfectly for 7 months, till i got a windows 10 anniversary update. It caused my computer to give BSOD with "system service exception igdkmd64.sys" error after every 2 days. I have latest version of the driver (Intel High-Definition Graphics Driver, 20.19.15.4360 Rev.B). I tried every possible solution available on internet to solve the problem but in vain. Finally i had to disable the intel driver and put the notebook on Microsoft?s generic driver which ended the BSOD. Now i have to live with poor graphics. Probably the only solution is if HP launches a newer version of driver that doesn?t conflict with windows 10 anniversary update. Or is there any other solution?

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/BSOD-error-igdkmd64-sys-after-windows-10-anniversary-update/td-p/5784358
Relevancy 89.01%

Hi all I cannot update to Windows anniversary error - 0x8007001f code 10 update anniversary Windows update I get the x f error code Here is the log from C WINDOWS BT Windows 10 anniversary update - error code 0x8007001f Sources Panther setuperr log Code - - Error MOUPG CDlpActionImpl lt class CDlpErrorImpl lt class CDlpObjectInternalImpl lt class CUnknownImpl lt class IMoSetupDlpAction gt gt gt gt Suspend Result xC - - Error MOUPG CSetupManager ExecuteInstallMode Result x BB - - Error MOUPG CSetupManager ExecuteDownlevelMode Result x BB - - Error MOUPG CSetupManager Execute Result x BB - - Error MOUPG CSetupHost Execute Windows 10 anniversary update - error code 0x8007001f Result x BB - - Error CONX Failed hashing for c program files x norton internet security nortondata definitions sdsdefs eng sys x - - Error CONX Failed hashing for c program files x norton internet security nortondata definitions sdsdefs eng sys x - - Error CONX Failed hashing for c program files x norton internet security nortondata definitions sdsdefs ex sys x - - Error CONX Failed hashing for c program files x norton internet security nortondata definitions sdsdefs ex sys x - - Error SP pSPRemoveUpgradeRegTree failed to delete reg tree HKLM SYSTEM Setup Upgrade gle x - - Error x MIG CSIAgent Invalid xml format FormatException quot id quot attribute is mandatory void cdecl Mig CMXEMigrationXml LoadSupportedComponent class UnBCL XmlNode int class Mig CMXEMigrationXml class Mig CMXEXmlComponent - - Error CSI F Error Facility FACILITY STATE MANAGEMENT Code from CWcmScalarInstanceCore GetCurrentValue options x status quot null quot value type x a c bytes x c e d gle x - - Error CSI F Error Facility FACILITY STATE MANAGEMENT Code from CWcmScalarInstanceCore GetCurrentValue options x status quot null quot value type x a c bytes x c e d gle x - - Error CSI F Error Facility FACILITY STATE MANAGEMENT Code from CWcmScalarInstanceCore GetCurrentValue options x status quot null quot value type x a c bytes x c e d gle x - - Error x MIG CSIAgent Invalid xml format FormatException Component with display name Plugin C EC F- F - CE -AF - A FA already loaded cdecl Mig CMXEMigrationXml CMXEMigrationXml class Mig CPlatform class UnBCL String class UnBCL XmlDocument class UnBCL String class UnBCL String - - Error x fe MIG Plugin D C- A- b -AD -DCE D CD C shmig Failed to get preferred homegroup with hr x - - Error CSetupAutomation Resurrect File not found C WINDOWS BT Sources Panther automation dat gle x - - Error SP CSetupPlatform ResurrectAutomation Failed to resurrect automation x gle x - - Error SP CSaveConfigData DoExecute Failed to write the OS pieces to the C WINDOWS BT Sources SetupPlatform ini config file Error x F gle x f - - Error SP Operation failed Save config data Error x F gle x b - - Error MOUPG MoSetupPlatform Finalize reported failure gle x b - - Error MOUPG MoSetupPlatform Using action error code x F gle x b - - Error MOUPG CDlpActionFinalize ExecuteSetupPlatformFinalize Result x F gle x b - - Error MOUPG CDlpActionFinalize ExecuteRoutine Result x F - - Error MOUPG CDlpActionImpl lt class CDlpErrorImpl lt class CDlpObjectInternalImpl lt class CUnknownImpl lt class IMoSetupDlpAction gt gt gt gt Execute Result x F - - Error MOUPG CDlpTask ExecuteAction Result x F - - Error MOUPG CDlpTask ExecuteActions Result x F - - Error MOUPG CDlpTask Execute Result x F - - Error MOUPG CSetupManager ExecuteTask Result x F - - Error MOUPG CSetupManager ExecuteTask Result x F - - Error MOUPG CSetupManager ExecuteInstallMode Result x F - - Error MOUPG CSetupManager ExecuteDownlevelMode Result x F - - Error SP CSetupPlatform ResurrectNewSystem Cannot resurrect new system Win Exception C Windows BT Sources NewSystem dat The system cannot find the file specified x cdecl UnBCL FileStream FileStream const class UnBCL String enum UnBCL FileMode enum UnBCL FileAccess enum UnBCL FileShare unsigned long gle x - - Error MOUPG CSetupManager Execute Result x F - - Error MOUPG CSetupHost Ex... Read more

http://www.tenforums.com/windows-updates-activation/63075-windows-10-anniversary-update-error-code-0x8007001f.html
Relevancy 88.58%

Hey all,

So I am currently reinstalling Windows on my dad's old laptop after the hard drive decided up die on us, and I stumbled on a problem that's a bit too hard for me to fix.

Namely, I am completely unable to install any Windows Update. Not even MSE will install.

I tried running SURT, but got error code 0x8000247
I also tried running SFC /SCANNOW, it ran the verification fase until 98% and then stated that there where unfixable problems.

The displayed error codes are:
In WU: "8024A000"
In SURT: "0x8000247"
Whilst installing MSE: "0x80070643".

Attached you will find CBS.log and MSINFO with my system specs.
Cheers and many thanks in advance,
Nommy

CBS.log MSINFO32.nfo

A:Windows Update error code 8024A000; unable to install any update.

That's very reminiscent of similar errors in Win7 - and I wouldn't be surprised to see it being non-genuine.
Please post an MGADiag report BEFORE doing the below potential fixes.

This may simply be caused by a bad set of Intel Storage Matrix Technology drivers -

Installing the Intel Drivers
try downloading and installing them from here -
https://downloadcenter.intel.com/Det...&DwnldID=17882

(IATA89ENU.exe)

Once complete, please reboot twice, then post another MGADiag report.


If nothing has changed, try this...

Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report and post the results.

If neither of them work, we'll re-evaluate.

http://www.vistax64.com/windows-updates/302946-windows-update-error-code-8024a000-unable-install-any-update.html
Relevancy 88.15%

windows 10 after update to  anniversary update I have cycle reboot (only dell logo)
I think it's problem with driver INTEL RAPID ON (Intel Rapid Storage)
I'm have lates update driver and bios

http://en.community.dell.com/support-forums/laptop/f/3518/t/19994887
Relevancy 88.15%

I've tried to do with Windows 10 Anniversary update on my Inspiron 2350, but each time I try, it tells me it can't proceed because of a video error.  I've gone to the 2350 page and I've done all the driver updates there were to install but that didn't fix the problem.  Does anyone have any idea what the problem is? 

http://en.community.dell.com/support-forums/desktop/f/3515/t/19988065
Relevancy 85.14%

I tried to update using the usual method, as the new update was present. I tried twice, and it failed twice. 2nd time it became clear that the Razer Synapse software (recent purchase of a discount keyboard) was causing the issue. So, I've uninstalled that. Fine, so now I go to hit the update button again, but Windows tells me it's up to date? I know for a fact it isn't, because it just told me it could not install the update and reverted to the previous version. What gives?
So, I can see it has downloaded the update to the '$WINDOWS.~BT' folder, but it will not trigger by running the 'setup.exe' file. My question is, how do I proceed now? How do I trigger the update I've downloaded to install, when Windows seems to have decided it's already installed it?
Ruddy Windows 10...

A:Anniversary Update Install - Help!

Originally Posted by AndyCalling I tried to update using the usual method, as the new update was present. I tried twice, and it failed twice. 2nd time it became clear that the Razer Synapse software (recent purchase of a discount keyboard) was causing the issue. So, I've uninstalled that. Fine, so now I go to hit the update button again, but Windows tells me it's up to date? I know for a fact it isn't, because it just told me it could not install the update and reverted to the previous version. What gives?
So, I can see it has downloaded the update to the '$WINDOWS.~BT' folder, but it will not trigger by running the 'setup.exe' file. My question is, how do I proceed now? How do I trigger the update I've downloaded to install, when Windows seems to have decided it's already installed it?
Ruddy Windows 10... try this tool: https://support.microsoft.com/en-us/...troubleshooter

http://forums.windowscentral.com/windows-10/433946-anniversary-update-install-help.html
Relevancy 85.14%

The Win 10 AU fails to install with error:0x80070002-0x20009.I have a cloned SSD and use the old HDD for data as Drive D:I've tried the standard update and also the MediaCreationTool.exe, I have also triedto install with the HDD disabled. Any help ?




P50 20ENCTO1WW | 6700HQ | 32 GB RAM |M1000M |512 SSD

https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P50-Win-10-Anniversary-Update-Won-t-Install/td-p/3415672
Relevancy 84.71%

I have spent several hours trying to get my HP Envy upgraded from Windows 8.1 to Windows 10. I have updated all my drivers, removed all USB items, tried disabling my wifi, and tried installing via USB - all to no avail. Can someone please help me!

https://social.technet.microsoft.com/Forums/en-US/1c07e4de-158a-4b89-a057-d3aea4920d43/windows-10-will-not-install-error-0xc19001010x20017?forum=MTCWin8
Relevancy 84.28%

GDRDU: Cumulative Update for Windows 10 Version 1607 for x64-based Systems (KB3176938)
Failed to install.
Installation went up to 95% and then stuck on that for some time and then the computer restarted and said reverting to previous version.

http://forums.windowscentral.com/ask-question/438821-anniversary-update-failed-install.html
Relevancy 83.42%

I had no problems with Windows 10 start times but since the Anniversary update, boot time is just under 3 minutes. Any ideas to what to look into for the cause?

A:Very slow boot after Anniversary update

Yep....same thing happened to me. I have a pretty stout custom build. I ended up doing a clean install. I downloaded the media creation tool, used the USB method....my system is way better now.

Windows 10

http://www.tenforums.com/windows-updates-activation/59112-very-slow-boot-after-anniversary-update.html
Relevancy 83.42%

I had no problems with Windows 10 start times but since the Anniversary update, boot time is just under 3 minutes. Any ideas to what to look into for the cause?

A:Very slow boot after Anniversary update

Yep....same thing happened to me. I have a pretty stout custom build. I ended up doing a clean install. I downloaded the media creation tool, used the USB method....my system is way better now.

Windows 10

http://www.tenforums.com/performance-maintenance/59112-very-slow-boot-after-anniversary-update.html
Relevancy 83.42%

Running Windows 10 1511 on a 500gb SSD - all works 100% Have installed 1607 twice now works OK and seems Ok for a few hours and then I find all sorts of problem occouring - programs will not run, even Ctrl/Alt/Delete does not work and so on and I end up going back to 1511 wg#hich I have kept a copy of.
At present I have decided to abandon 1607 and continue with1511 - will this still be supported with security updates?
Martin

http://forums.windowscentral.com/ask-question/440081-why-after-i-install-anniversary-update-does-start-go-wrong.html
Relevancy 83.42%

I am unable to install the Windows Anniversary Update keeps failing after second restart at around Machine is a relatively recent custom build a failing Update Install Unable Anniversary to - Keeps little over months old Gigabyte B M-HD rev mobo i - CPU Geforce GT GB GPU GB RAM Samsung EVO GB SSD Been running Windows Pro -bit with no problems sfc scannow gives a clean bill of Unable to Install Anniversary Update - Keeps failing health No apparent issues with drivers Device Manager shows all good Tried installing via Windows Update and also via the downloaded Windows Upgrade executable same result Everything goes well up until the second restart and then the start screen just hangs with the little circle of dots twiddling Unable to Install Anniversary Update - Keeps failing around indefinitely - up to hours - and no hard drive activity whatsoever The only USB devices connected are my keyboard and mouse I've tried installing in Clean Boot mode with all startup items and non-Microsoft services disabled no difference Tried increasing the size of the System Reserved partition from MB to MB no difference Tried installing while disconnected from the internet no difference Downloaded the Windows ISO which includes the Anniversary Update and tried an upgrade install in Clean Boot mode both with and without internet connection - installation froze at exactly the same place after the second restart Received the following error message upon recovering to previous version No idea where to go from here Clean install is definitely a last resort I have or paid for programs installed that I don't want to lose and which may or may not re-activate Any assistance would be most welcome

http://www.tenforums.com/windows-updates-activation/65627-unable-install-anniversary-update-keeps-failing.html
Relevancy 83.42%

My first impressions:

Pros:
Seems a bit faster overall - I did a complete system image backup in 00:02:09 (previously took 00:02:35)
OS install uses less space (at least for my installation)
Event viewer shows no new instances (I had two known issues before and they are still there)
Reapplied many of Brinks tutorial suggestions and most of them worked... except this one:

gpedit management notice is missing (second screen shot) so I can't say for sure if it will work (or not).

Cons:
Win10BGChanger1.2.1 still doesn't work (as expected)
Sound removed from notifications by default (not a con for me though)
Installed default audio playback to my headset - changed to speakers
All in all, working well so far (for me).

A:Anniversary Update - Clean Install - First Impressions

I like everything except the removal of being able to skip the lock screen on wake from resume

http://www.tenforums.com/general-support/58382-anniversary-update-clean-install-first-impressions.html
Relevancy 83.42%

Trying to install the KB3185614 (anniversary 1607) update, but getting the 'couldn't complete the updates undoing changes' messages after 100%.  System log shows a 0x8024200D error code. Tried.... 1. uninstalling all anti-virus apps, inc luding cleanup tools afterwards.2. deleting the SoftwareDistribution folder contents.3. downloading the update manually from the MS catalog site and installing from that4. doing an upgrade install using the latest 1607 iso on a dvd from within Windows Anyhting else I could try before I go for the last resort of a clean install using said dvd?. thanksjoe

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Failing-to-install-the-anniversary-1607-update-on-a-15/td-p/5780927
Relevancy 83.42%

My first impressions:

Pros:
Seems a bit faster overall - I did a complete system image backup in 00:02:09 (previously took 00:02:35)
OS install uses less space (at least for my installation)
Event viewer shows no new instances (I had two known issues before and they are still there)
Reapplied many of Brinks tutorial suggestions and most of them worked... except this one:

gpedit management notice is missing (second screen shot) so I can't say for sure if it will work (or not).

Cons:
Win10BGChanger1.2.1 still doesn't work (as expected)
Sound removed from notifications by default (not a con for me though)

All in all, working well so far (for me).

http://www.tenforums.com/installation-setup/58382-anniversary-update-clean-install-first-impressions.html
Relevancy 82.99%

This x64 system was upgraded from Windows 7 Ultimate in August 2015. All the patches and updates have been applied successfully. I have eliminated all but one error. I have been working on this for days. I would appreciate any help resolving this error:

2016-08-24 15:35:51, Error MOUPG CInstallUI::GetDefaultLanguage(1715): Result = 0x80070002[gle=0x00000002]
2016-08-24 15:43:43, Error MOUPG CSetupManager::GetDUSetupResults(5249): Result = 0x80070490

http://www.tenforums.com/installation-setup/61407-windows-1511-10586-545-anniversary-udate-fails-0xc1900101-0x20017.html
Relevancy 82.56%

Windows Anniversary Update will not get past the splash screen with a Asus AMD Radeon R fitted I spent days trying to install the Anniversary Update so not Radeon 10 installed R9 (Anniversary boot Win with Update) will that I can play Forza Horizon as it will not even install without it In the end I took all the cards out of my system and disconnected all peripherals and used the on-board intel graphics I did a fresh installation of Windows Anniversary and it finally installed okay I added the Win 10 (Anniversary Update) will not boot with Radeon R9 installed hardware back by and in the end Windows gets stuck at the splash screen when I have the Radeon R installed I installed the drivers but it still just gets stuck at the splash screen with no revolving circle and will not boot with the Radeon R installed When I take out the Radeon and use the on-board intel card it will boot ok I can boot from my other SSD which is pre Anniversary Update and everything works fine with the Radeon R installed I have no idea what to do next Any help is appreciated

http://www.tenforums.com/graphic-cards/69151-win-10-anniversary-update-will-not-boot-radeon-r9-installed.html
Relevancy 82.56%

Windows Anniversary Update will not get past the splash screen with a Asus AMD Radeon R fitted I spent days trying to install the Anniversary Update so that I can play Forza Horizon as it will not even install without it In the end I took all the cards out of my system and disconnected all peripherals and used the on-board intel graphics I did a fresh installation of Windows Anniversary and it finally installed okay I added the hardware back by and in the end Windows gets stuck at the splash screen when I have the Radeon R installed I installed the drivers but it still just gets stuck at will R9 not Radeon with 10 installed Win boot (Anniversary Update) the splash screen with no revolving circle and will Win 10 (Anniversary Update) will not boot with Radeon R9 installed not boot with the Radeon R installed When Win 10 (Anniversary Update) will not boot with Radeon R9 installed I take out the Radeon and use the on-board intel card it will boot ok I can boot from my other SSD which is pre Anniversary Update and everything works fine with the Radeon R installed I have no idea what to do next Any help is appreciated

http://forums.windowscentral.com/windows-10/444601-win-10-anniversary-update-will-not-boot-radeon-r9-installed.html
Relevancy 82.56%

Windows Anniversary Update will not get past the splash screen with a Asus AMD Radeon R fitted I spent days trying to install the Anniversary Update R9 with Radeon Win installed will not (Anniversary boot 10 Update) so that I can play Forza Horizon as it will not even install without it In the Win 10 (Anniversary Update) will not boot with Radeon R9 installed end I took all the cards out of my system and disconnected all peripherals and used the on-board intel graphics I did a fresh installation of Windows Anniversary and it finally installed okay I added the hardware back by and in the end Windows gets stuck at the splash screen Win 10 (Anniversary Update) will not boot with Radeon R9 installed when I have the Radeon R installed I installed the drivers but it still just gets stuck at the splash screen with no revolving circle and will not boot with the Radeon R installed When I take out the Radeon and use the on-board intel card it will boot ok I can boot from my other SSD which is pre Anniversary Update and everything works fine with the Radeon R installed I have no idea what to do next Any help is appreciated

http://www.tenforums.com/windows-updates-activation/69151-win-10-anniversary-update-will-not-boot-radeon-r9-installed.html
Relevancy 82.56%

So this is very frustrating... I'm trying to install the anniversary update, and used the upgrade assistant. But when it restarts, it flashes for just a second the update screen, then shuts off and restarts again and loads without the update...

Any idea what I did wrong? I even reset the PC and it's still causing issues...

Any help would be appreciated.

http://www.tenforums.com/performance-maintenance/58822-weird-flash-skip-when-trying-install-anniversary-update.html
Relevancy 82.56%

This box came with windows 7 64 bit Home OS.  I recently upgraded to the windows 10 OS in order to take advantage of the latest OS.  Around August the windows 10 anniverary update became available but upon attempting multiple times it have failed.  I receive a 0xc1900200 error and a reference to the system reserved partition not being big enough.  I don't seem to see a partition called System Reserved partition but have tried to expande what looks like a 100 MB SRP, using Partition Magic.  It doesn't let me change this 100 MB partition.  The PC runs fine but because of MS auto updates, which I need to keep other MS software up to date, I get regular failures of the Anniversary update release.

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Unable-to-install-win-10-anniversary-update-on-Envy-700/td-p/5811332
Relevancy 82.56%

Hello to everyone i storage update install to in 16GB of tablets anniversary how have sucessfully installed the update Anniversary of windows x to my tablet what i have is an nextbook of inches which has GB of storage and just if try to update will get the message of not enough space to do the update in this how to install anniversary update in tablets of 16GB storage poost will detail how to do the install without die on the attempt the time that takes in do the update is about - hours due the low specs of this tablet can also be for any tablet that has GB storage Materials to use list an empty micro SD card of - GB of capacity i used an micro sd card of GB for this procedure i say empty because i have tried use an card with files inside and the tool media creator erased all my files so i do emphasis in this preparation of the SD card memory in an card reader in another computer download from the Media tool creator the version of windows that your computer use and use the SD card to store the version of windows from media tool i know many tablets has OTG capabilities but have to keep in mind the following if your tablet gets the battery charged via an micro USB connector then you must use the method of do the upgrade by Micro SD card since the installation will take - hours so need keep the tablet powered and plugged to the wall socket all the time if ran the set up by battery will get no power in no time and will brick your tablet forever or in the best of the chances will get back automatically to the windows version that had previosuly iunstalled in any case i do not get responsible by the eventual problems and damages that might suffer your tablet by not follow closely this guide another option if your tablet for charge the battery via an adaptor and not use an micro usb port to charge the battery and your tablet has OTG capability can use an USB flash drive connected via OTG adapter also will be slower the process too but is an option will not cover this since havce not tried this option st Step should erase all software everything UWP apps too and all apps that installed from store or that came installed with windows MSN suite everything just i know is obviosuly say that only windows OS must be kept nd Step should eliminate all the features and characteristics on control panel programm and features go to turn windows features on or off and uncheck everything will ask to restart so do the reboot windows will run just fine try to do backup if you have things stored in the tablet since we need to erase everything to get the most space to allow that can install windows version without troubles also run an cleaner for erase temporal files and everything that be using precious space on your tiny storage rd step now have to put the card on your micro SD slot try to do it when your tablet be turned off for avoid damages to the file structure or the same card once you did this turn on your tablet and log into windows go to my PC and open the sd card and execute the executable file that is on there follow the steps in one screen will complain that lacks space already and should sellect an external unit with at least GB of space free select the same SD card i know this sound a bit weird since from there will be also the files of media tool but believe me will work since we can not use the micro USB connection because we need keep powered the tablet in all the process since on micro sd card does the copy also of your previous windows version in case of fail the update by any reason will not erase the micro sd card this operation th step wait the time that will takes the upgrade and will get installed the new version in this case as will not be any of your favorite UWP apps there need to download them and install from the store i have tried this and in my tablet could update my windows version without problems just patience is the key best regards Francisco

http://forums.windowscentral.com/general-tablet-laptop-discussion/434519-how-install-anniversary-update-tablets-16gb-storage.html
Relevancy 82.13%

Trying to run the update, everything seems to run fine, and then I get a message about uninstalling an app that isn't compatible, but it isn't listed? I'm currently on Windows 10...
I've attached a screenshot.
I've tried doing a clean boot and still got the same results.

A:Anniversary Update Error

Originally Posted by maevinj Trying to run the update, everything seems to run fine, and then I get a message about uninstalling an app that isn't compatible, but it isn't listed? I'm currently on Windows 10...
I've attached a screenshot.
I've tried doing a clean boot and still got the same results. Do a antymalware cleanin and check old progrs forgotten in you pc

http://forums.windowscentral.com/windows-10/434085-anniversary-update-error.html
Relevancy 81.7%

Please help!
After yesterdays update (I used the media creation tool), I now have 3 partitions on my C drive.
The top drive, before the update, didn't have the partition on the right (NTFS 450MB used).
My boot file were in my "E" drive, but now where are they?
Can I get rid of that 450MB???

Here's a different view of the partition:
If I open the 450MB partition and here's what is in it:

Here's what's in the "E" patition:

http://www.tenforums.com/installation-setup/58457-after-anniversary-update-where-my-hard-drive-boot-files.html
Relevancy 81.7%

Hi all Wondering if anyone else has experienced an icon display issue on their start menu with the update I have just clean installed and fully updated the Anniversary Update on PC's and both are experiencing an identical issue with their start menu The problem whilst seemingly minor is especially annoying given that I have performed the updates for some friends and it is a matter of pride to me that I hand over any such systems in a perfect state The Start Menu program list A - Z list as well as the quot most used quot and quot recently added quot lists contain icon tiles for the installed programs On both systems around of these tiles display a generic quot blank page quot image rather than the icon image associated with that program That said the tile in question opens it's associated program and it's text label also Update menu Clean anomaly Start - Anniversary Install. displays correctly as I said earlier an annoying niggle By now you are all thinking ah its a icon cache failure just rebuild the icon cache I have of course rebuilt the icon cache following the instructions contained in option of the tutorial here www tenforums com tutorials -icon-cache-rebuild-windows- -a html as well as deleting the C Users lt Username gt AppData Local IconCache db file neither of which corrects the issue Additionally I have manually refreshed several of the icons right click button tile gt more gt open file location by changing and then reverting the ico file through properties This makes the image display correctly but only until the pc is restarted There is a seemingly random Anniversary Update - Clean Install. Start menu anomaly pattern to the shortcut locations concerned with many of those shortcuts which reflect the icon image in the tile button appearing in the C ProgramData Microsoft Windows Start Menu Programs folder whilst others reflect the user profile C Users lt Username gt AppData Roaming Microsoft Windows Start Menu Programs or one of the sub folders associated with the program s in question The affected icon tiles include several of the Office suite e g Word Access PowerPoint etc the Adobe Suite e g Photoshop LightRoom Dreamweaver etc as well as various standalone programs such as LogMeIn and some of the Windows Accessories Has anyone any suggestions on how to remedy the issue PC Pilot

http://www.tenforums.com/installation-setup/63866-anniversary-update-clean-install-start-menu-anomaly.html
Relevancy 81.7%

Hi all Wondering if anyone Install. Anniversary Clean Start menu Update - anomaly else has experienced an icon display issue on their start menu with the update I have just clean installed and fully updated the Anniversary Update on PC's and both are experiencing an Anniversary Update - Clean Install. Start menu anomaly identical issue with their start menu The problem whilst seemingly minor is especially annoying given that Anniversary Update - Clean Install. Start menu anomaly I have performed the updates for some friends and it is a matter of pride to me that I hand over any such systems in a perfect state The Start Anniversary Update - Clean Install. Start menu anomaly Menu program list A - Z list as well as the quot most used quot and quot recently added quot lists contain icon tiles for the installed programs On both systems around of these tiles display a generic quot blank page quot image rather than the icon image associated with that program That said the tile in question opens it's associated program and it's text label also displays correctly as I said earlier an annoying niggle By now you are all thinking ah its a icon cache failure just rebuild the icon cache I have of course rebuilt the icon cache following the instructions contained in option of the tutorial here www tenforums com tutorials -icon-cache-rebuild-windows- -a html as well as deleting the C Users lt Username gt AppData Local IconCache db file neither of which corrects the issue Additionally I have manually refreshed several of the icons right click button tile gt more gt open file location by changing and then reverting the ico file through properties This makes the image display correctly but only until the pc is restarted There is a seemingly random pattern to the shortcut locations concerned with many of those shortcuts which reflect the icon image in the tile button appearing in the C ProgramData Microsoft Windows Start Menu Programs folder whilst others reflect the user profile C Users lt Username gt AppData Roaming Microsoft Windows Start Menu Programs or one of the sub folders associated with the program s in question The affected icon tiles include several of the Office suite e g Word Access PowerPoint etc the Adobe Suite e g Photoshop LightRoom Dreamweaver etc as well as various standalone programs such as LogMeIn and some of the Windows Accessories Has anyone any suggestions on how to remedy the issue PC Pilot

A:Anniversary Update - Clean Install. Start menu anomaly

Hi, some ideas - you may have come across these already... fortunately this hasn't happened to me
(Yes, it says tiles, but appears to be talking about the icons)
Windows 10: How to fix blank tiles on Start Menu

Stardock products:
Windows 10 - Blank start menu icons - Super User

How does it look if you create a new user for test purposes?

P.S. I don't use Win 10's start menu - I use Classic Shell (free) to avoid all the issues and actually have a properly expressed start menu that I don't have to fight with. Eg. in Win 10's version of my Start Menu I see
Help
Help
Help
Help
...

- all shortcuts from individual subfolders for different programs, extracted and listed alphabetically. Some help that is.

http://www.tenforums.com/general-support/63866-anniversary-update-clean-install-start-menu-anomaly.html
Relevancy 81.27%

I have a Dell XPS that failed Windows anniversary update until UEFI secure boot was turned off It apparently then completed but I cannot re-enable Windows update secure 10 disabled 8700 XPS needed enable now secure anniversary UEFI can't boot boot to UEFI complete secure boot without the same boot problem advising Recoveryyour pc device needs to be repaired during Windows anniversary updateAn unexpected error has occurredError Code xc you ll need to use recovery tools nbsp nbsp Is there a solution to enable UEFI secure boot nbsp I am using a Dell XPS pc with XPS 8700 needed UEFI secure boot disabled to complete Windows 10 anniversary update can't enable UEFI secure boot now an SSD drive The Windows update was installingthen after one of the reboots the error above nbsp The pc was running prior to the update and had UEFI OS secure boot enabled nbsp no prior problems I attempted to do any of the safe mode boots but none would proceed Disabling the UEFI safe secure boot mode apparently let the install continue and the das it did before with I believe completion of the installation of Windows anniversary update PC now shows Windows home Ver The problem returns if I enable UEFI secure boot and the PC stops I would like to determine a wayto locate the problem or issue related to the secure boot nbsp Using the media creation tool may justrepeat the problem once secure boot is re-enabled nbsp Dell lists that they have tested XPS with this update and have not indicated problems no mention of secure boot issue

http://en.community.dell.com/support-forums/desktop/f/3514/t/19993741
Relevancy 81.27%

I have a Dell XPS that failed Windows anniversary update until UEFI secure boot was turned off It apparently then completed but I cannot re-enable secure boot without the same boot problem advising Recoveryyour pc device needs to be repaired during Windows anniversary updateAn unexpected error has occurredError boot update to Windows can't needed XPS boot enable anniversary now UEFI secure complete 8700 disabled secure 10 UEFI Code xc you ll need to use recovery tools nbsp nbsp Is there a solution to enable UEFI secure boot nbsp I am using a Dell XPS pc with an SSD drive The Windows update was installingthen after one of the reboots the error above nbsp XPS 8700 needed UEFI secure boot disabled to complete Windows 10 anniversary update can't enable UEFI secure boot now The pc was running prior to the update and had UEFI OS secure boot XPS 8700 needed UEFI secure boot disabled to complete Windows 10 anniversary update can't enable UEFI secure boot now enabled nbsp no prior problems I attempted to do any of the safe mode boots but none would proceed Disabling the UEFI safe secure boot mode apparently let the install continue and the das it did before with I believe completion of the installation of Windows anniversary update PC now shows Windows home Ver The problem returns if I enable UEFI secure boot and the PC stops I would like to determine a wayto locate the problem or issue related to the secure boot nbsp Using the media creation tool may justrepeat the problem once secure boot is re-enabled nbsp Dell lists that they have tested XPS with this update and have not indicated problems no mention of secure boot issue

A:XPS 8700 needed UEFI secure boot disabled to complete Windows 10 anniversary update can't enable UEFI secure boot now

rdubayah,
If your computer was running WIndows 10 without any issues prior to downloading the Anniversary update, then you would not have had to change any settings in the bios to install the update.The UEFI and Secure Boot settings are to enable booting with a USB or DVD to install Windows.
Disable Legacy Boot Mode and Enable UEFI
Start the computer and TAP the F2 key to enter the bios. Once in the bios Press F9 to Restore the bios to the Default Settings. F10 to save changes and exit. You could have a hardware problem. To run a hardare diagnostics on the computer you would start the computer and TAP the F5 key. Insert a cd/dvd in the optical drive for running the diags.

http://en.community.dell.com/support-forums/software-os/f/4997/t/19993741
Relevancy 81.27%

Hi and greetings from Sweden!

New on the forum, long time lurker.

So my problem. Windows 10 wont update. Error code "0x800703ee". Things i have tried so far:
Cleaned and restarted Windows UpdateSFC /ScannowFollowed this guide: http://answers.microsoft.com/en-us/w...d-8928bd7831beTried updating via ISO

A while ago i had to recreate my EFI parition, perhaps it has something to do with it?
The last thing is to do a clean install, but such a hassel with all my hours of customization down the drain.

Thank you in advance.

http://www.tenforums.com/windows-updates-activation/58693-anniversary-update-error-0x800703ee.html
Relevancy 81.27%

Trying to update using Windows 10 Update assistant as automatic update not showing yet. It checks my system then downloads ok but once it starts it stops at 1 or 2 % and says "Something waent wrong " and gives error code 0x80070057.

All previous updates have been fine.

A:Anniversary Update error 0x80070057

Did that for me so i went the media creation tool way to install it

http://www.tenforums.com/installation-setup/58682-anniversary-update-error-0x80070057.html
Relevancy 81.27%

Trying to update to the Anniversary Win 10 and after about an hour of "thinking" it said that it couldn't finish because of Error 0xc190012f. Currently the PC is running Win 10 with no outstanding updates, as far as I know.

Anyone else get this error or have a suggestion as to how to proceed?

Gerry

http://www.tenforums.com/installation-setup/64795-anniversary-update-error-0xc190012f.html
Relevancy 80.84%

I just got this update and restarted my PC. Now Cortana is not there even after I set my region language and speech to united states. Help
Posted via the Windows Central App for Android

A:Cortana disappeared from anniversary update after getting the cumulative update 14393.10

Originally Posted by buddy007 I just got this update and restarted my PC. Now Cortana is not there even after I set my region language and speech to united states. Help
Posted via the Windows Central App for Android try a restart and check again
It does not appear in apps list?

http://forums.windowscentral.com/windows-10/434224-cortana-disappeared-anniversary-update-after-getting-cumulative-update-14393-10-a.html
Relevancy 80.84%

I have an existing Windows 10 Pro installation. My partitions are:
system reserved: 500 mb
C: boot, page file, primary partition
E: logical drive
F: logical drive
I would like to do a clean install with WIN 10 Anniversary Update (1607), and convert my disk from BIOS to UEFI.
What modifications would i need to do to GPTgen while upgrading and maintaining my programs and data?

Thanks

A:clean install with anniversary update & disk conversion BIOS to UEFI

Modifications....none.

Windows 10 already utilizes GPT partitioning....on a clean install. The only thing you would need to do is change your BIOS firmware from Legacy BIOS to UEFI BIOS. You will need to confirm that in your BIOS. Or to check with in windows.....in the search bar of cortana, type system information and when the window pops up, scroll down to BIOS mode......here's mine.

http://www.tenforums.com/installation-setup/63968-clean-install-anniversary-update-disk-conversion-bios-uefi.html
Relevancy 80.41%

On my Son,s computer . Before the update I made a image with macrium reflect , updated and the computer will not run , I keep getting a attempted switch from dcp error after anniversary update .. Ideas , thanks .

http://www.tenforums.com/installation-setup/59717-attempted-switch-dcp-error-after-anniversary-update.html
Relevancy 79.98%

Running Windows Home Premium x Cannot update attempting to upgrade to Win professional Discovered automatic updates were fried for some time and the system did not install home 8007370B error cannot update, fails, Win7 update SP1. - have SP which is apparently required for the upgrade I see similar threads each seems to require advanced individual registry repair Win7 home update fails, error 8007370B - cannot update, install SP1. so starting my own - if there is a generic fix please reply with it and I can give it a shot I have tried the normal tools to fix without change- see below Symptoms Windows updates fails with an error code B - Windows Update encountered an unknown error I have run SURT several times successfully I have run Fixit MicrosoftFixit wu LB Run Each returns 'Repair Windows Update components' Win7 home update fails, error 8007370B - cannot update, install SP1. and 'Windows Update components must be repaired' All claim to have fixed the problem no change naturally Attempted Win7 home update fails, error 8007370B - cannot update, install SP1. to run SFC scannow from an elevated prompt and it fails with 'Windows Resource Protection could not perform the requested operation' Same behavior when attempted from Safe Boot Downloaded and attempted to install SP locally both the all platforms version and the Win x version Both fail with errors Ran the Norton remover tool and Macafee remover tool - think Norton came with the system but was never activated ran the Macafee remover tool just to be sure Have renamed the Softwareupdate folder without any change Uploaded CBS logs Download CBS zip from Sendspace com - send big files the easy way

A:Win7 home update fails, error 8007370B - cannot update, install SP1.

See most of the repairs require the components file as well

Download COMPONENTS.zip from Sendspace.com - send big files the easy way

http://www.sevenforums.com/windows-updates-activation/281843-win7-home-update-fails-error-8007370b-cannot-update-install-sp1.html
Relevancy 79.98%

Hi,

I just downloaded and installed the Windows 10 Anniversary Update yesterday and so far I have noticed some changes in my computer that I was not aware of before the update.

(1) Somehow my System Restore was set to Disabled and all of my restore points are now gone and

(2) All of my Microsoft Update History is also missing.

Could the update be the cause of both?

Thanks and regards,

2harts4ever

A:Update History missing after Win10 Anniversary Update

Yes, the update is the cause of both.

Major version upgrades like this change so much functionality, they often have to reset various settings to default so that they are in a known good state. Unfortunately, many have complained about the System Restore option being reset to Disabled (this is the Windows default).

As for your previous restore points, that's to be expected. You can't restore to a previous restore point on a previous OS version. All the baseline files are different, and you would be restoring settings for the old OS if you were to somehow be able to restore it.

Think of it like a Bookmark or favorite, but they've moved the location to a different URL. Restoring the old favorite only points you to somewhere that doesn't exist anymore.

As for #2, your update history is gone because again, it's a fresh OS, and previous updates are all integrated into the OS now, not patches. Those old updates don't apply to the new OS anymore.

http://www.tenforums.com/installation-setup/59127-update-history-missing-after-win10-anniversary-update.html
Relevancy 79.98%

Hi,

I just downloaded and installed the Windows 10 Anniversary Update yesterday and so far I have noticed some changes in my computer that I was not aware of before the update.

(1) Somehow my System Restore was set to Disabled and all of my restore points are now gone and

(2) All of my Microsoft Update History is also missing.

Could the update be the cause of both?

Thanks and regards,

2harts4ever

A:Update History missing after Win10 Anniversary Update

Yes, the update is the cause of both.

Major version upgrades like this change so much functionality, they often have to reset various settings to default so that they are in a known good state. Unfortunately, many have complained about the System Restore option being reset to Disabled (this is the Windows default).

As for your previous restore points, that's to be expected. You can't restore to a previous restore point on a previous OS version. All the baseline files are different, and you would be restoring settings for the old OS if you were to somehow be able to restore it.

Think of it like a Bookmark or favorite, but they've moved the location to a different URL. Restoring the old favorite only points you to somewhere that doesn't exist anymore.

As for #2, your update history is gone because again, it's a fresh OS, and previous updates are all integrated into the OS now, not patches. Those old updates don't apply to the new OS anymore.

http://www.tenforums.com/windows-updates-activation/59127-update-history-missing-after-win10-anniversary-update.html
Relevancy 79.98%

Hello,
I've been trying and failing to update Anniversary Update on Surface Pro 3.
Downloads, prepares, reboots and then, at about 14% of first step, it shows the thermometer gauge and shuts down.
When I power it on, it reverts to previous version of windows
I've tried it plugged in, plugged out, waiting a few minutes shutdown before starting in updating mode...
I don't know what to do

A:Failing to update Anniversary Update on Surface PRO 3 - overheating?

Originally Posted by Windows Central Question Hello,
I've been trying and failing to update Anniversary Update on Surface Pro 3.
Downloads, prepares, reboots and then, at about 14% of first step, it shows the thermometer gauge and shuts down.
When I power it on, it reverts to previous version of windows
I've tried it plugged in, plugged out, waiting a few minutes shutdown before starting in updating mode...
I don't know what to do the thermometer gauge represents your surface pro is getting overheated and in order to prevent heat damage to the core hardware the device/bios shuts down your device. so first we need to fix the overheating issue and then can you continue with the update.

http://forums.windowscentral.com/ask-question/439932-failing-update-anniversary-update-surface-pro-3-overheating.html
Relevancy 79.98%

Prior to the update my computer never froze, suddenly one day after the update it happens non-stop.I Google and found out a lot of people are affected.Is there anyone that can help me so I do not need to wipe my computer...

http://www.computerhope.com/forum/index.php/topic,158277.0.html
Relevancy 79.98%

Prior to the update my computer never froze, suddenly one day after the update it happens non-stop.
I Google and found out a lot of people are affected.

http://www.bleepingcomputer.com/forums/t/627705/win10-anniversary-updateversion-1607-has-my-pc-freezing-in-normal-boot-help/
Relevancy 79.55%

This update failure has occurred 5 times in the past three days on 32 bit system. My Win 8 update was purchased from MS in Nov. 2013 and installed then. During this recent update process I have updated Nividia card w/latest 32bit drivers and updated motherboard Intel chipset. This morning I ran SFC and found no integrity violations. DISM /restorehealth and /componentcleanup repaired and all OK. Still failed. Have read Barnacle's post and find 5 updates he mentions are missing. Need help getting them, if needed, and having problems doing so. Other guidance and suggestions appreciated.

A:Win 8.1 update fails repeatedly at 83% 0xC1900101-0x2000A

I suggest before running update:
Delete everything under: C:\Windows\SoftwareDistribution\DownloadDisable completely any anti virus softwareTask Manager -> Startup and disable everything in this tab.Win+X->Run and type: msconfig. On services tab, tick on: Hide all all Microsoft services then tap on Disable allPerform step 2 from this link: AUTOCHK Initiation Countdown Time - Change - Windows 7 Help Forums (the default in Windows 8 set to 1) then run: chkdsk C: /r <===== This may take a while to complete.Run Update.

http://www.eightforums.com/windows-updates-activation/47731-win-8-1-update-fails-repeatedly-83-0xc1900101-0x2000a.html
Relevancy 79.55%

Hi guys I am seeing this error twice on every boot since upgrading even a clean install doesn't clear it Code Log Name System Source Microsoft-Windows-DistributedCOM Date Event ID Task Category None Level Error Keywords Classic User LOCAL SERVICE Computer Chris Description The application-specific permission settings do not grant Local Activation Update Permissions (CLSID/APPID) since error Anniversary permission for the COM Server application with CLSID Permissions error (CLSID/APPID) since Anniversary Update B B D -FA D- B - DBD-B E C and APPID DDB - C - F - -E D D D D to the user NT AUTHORITY LOCAL SERVICE SID S- - - from address LocalHost Using LRPC running in the application container Unavailable SID Unavailable This security permission can be modified using the Component Services administrative tool Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-DistributedCOM quot Guid quot Permissions error (CLSID/APPID) since Anniversary Update B E -B AA- -BADC-B F A E quot EventSourceName quot DCOM quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level Permissions error (CLSID/APPID) since Anniversary Update gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Chris lt Computer gt lt Security UserID quot S- - - quot gt lt System gt lt EventData gt lt Data Name quot param quot gt application-specific lt Data gt lt Data Name quot param quot gt Local lt Data gt lt Data Name quot param quot gt Activation lt Data gt lt Data Name quot param quot gt B B D -FA D- B - DBD-B E C lt Data gt lt Data Name quot param quot gt DDB - C - F - -E D D D D lt Data gt lt Data Name quot param quot gt NT AUTHORITY lt Data gt lt Data Name quot param quot gt LOCAL SERVICE lt Data gt lt Data Name quot param quot gt S- - - lt Data gt lt Data Name quot param quot gt LocalHost Using LRPC lt Data gt lt Data Name quot param quot gt Unavailable lt Data gt lt Data Name quot param quot gt Unavailable lt Data gt lt EventData gt lt Event gt Now I have had permission errors before and I know you go into the registry and gain full access to the CLSID APPID and go to Component Services and DCOM config to customise Now the data it is refering to is quot ShellServiceHost quot but what do I customise in there All Local Activation boxes etc are ticked but the error still remains Do I have to add anything System etc while customising then tick those boxes Any assistance would be greatly appreciated - thanks

A:Permissions error (CLSID/APPID) since Anniversary Update

Same here. Upgraded from Win 7 Ultimate to Anniversary Edition using the Media Creation Tool.

http://www.tenforums.com/user-accounts-family-safety/58759-permissions-error-clsid-appid-since-anniversary-update.html
Relevancy 79.55%

I have been attempting to upgrade windows 10 pro, from version 10240 to version 1607 (anniversary update). I have tried both the Windows 10 Upgrade Assistant and the media creation tool (ISO). I get to 96% and, boom, every time it resets and restores my system to where it was before the upgrade started. The error I get is as follows:

0x8007042B - 0x4001E
The installation failed in the SECOND_BOOT phase with an error during PRE_OOBE operation.

I have searched for an answer and haven't found one. I have tried to trouble shoot it as best I can by unplugging everything but my keyboard/mouse, updated chipset, etc.. MS techs haven't been much help. Any thoughts? The iso is not on the OS drive, not sure if that matter. I would rather not have to nuke the system. I hate having to reinstall programs (adobe is the worst). Any help is appreciated.

Thanks.

http://www.tenforums.com/windows-updates-activation/65526-anniversary-update-fail-error-0x8007042b-0x4001e.html
Relevancy 79.55%

I have been attempting to upgrade windows 10 pro, from version 10240 to version 1607 (anniversary update). It looks like I have been stuck on 10240 so some time. I have tried both the Windows 10 Upgrade Assistant and the media creation tool (ISO - both from the HDD and bootable USB). I get to 96% and, boom, every time it resets and restores my system to where it was before the upgrade started. The error I get is as follows:
0x8007042B - 0x4001E
The installation failed in the SECOND_BOOT phase with an error during PRE_OOBE operation.
I have searched for an answer and haven't found one. I have tried to trouble shoot it as best I can by unplugging everything but my keyboard/mouse, updated chipset, etc.. MS techs haven't been much help. Any thoughts? I would rather not have to nuke the system. I hate having to reinstall programs (adobe is the worst). Any help is appreciated.
Thanks.

http://forums.windowscentral.com/windows-10/443076-anniversary-update-fail-error-0x8007042b-0x4001e.html
Relevancy 79.55%

Hi
Checking update history shows no errors, just the update waiting to be installed.
Here's what happens: update goes all the way through to the end, then it hangs with a black screen with the little dots going round and will sit like that for as long as I'll let it. There's no hard drive activity during this period.
When I eventually get bored of waiting, I do a hard reboot and the previous version is reinstated.
Any ideas how to move on from this?

A:Win10 Anniversary Update fails, but no error code.

To update to anniversary update and face minimum bugs or none use media creation tool by Microsoft. By personal experience it is the best way to upgrade to anniversary update.
you could download the media creation tool here: http://forums.windowscentral.com/e?l...token=3lPiByUm
Here is a knowledge article on How to by Windows Central: Use the Microsoft media creation tool to force the Windows 10 Anniversary Update today | Windows Central
At present you could try disabling any Antivirus. Disconnect any external devices you don't need and retry installing.
If you need additional help or want to reply to this thread , learn how to join windows central.

http://forums.windowscentral.com/ask-question/444193-win10-anniversary-update-fails-but-no-error-code.html
Relevancy 79.55%

I am trying to update to Anniversary edition of Windows 10 on 32GB ASUS Tablet. The update to 1511 went just fine. Now I am getting error when trying to upgrade to 1607 using Windows10Upgrade.28084. It checks compatibility and CPU, Memory and disc capacity all show good. Then get the page which shows error code 0x80070070 and states not enough space to install and suggests disc cleanup. Did that and have 18.0GB free space. But it will not let me download and install the upgrade. I do not have any apps running which I can remove. Surely 18GB is enough space. Please respond with a fix for me. Tablet is running 32bit OS

http://www.tenforums.com/windows-updates-activation/58624-error-code-0x80070070-when-trying-update-anniversary-edition.html
Relevancy 79.55%

original update went fine. 1511 update went fine. plenty of space on drive. plenty of available memory. windows defender security installed. ?

http://forums.windowscentral.com/ask-question/434712-error-code-downloading-anniversary-update-80072f78.html
Relevancy 79.12%

I have the Dell Inspiron non-touch and was able to install the Windows Anniversary Update today after a long session of sitting though Windows Updates Everything seemed to work fine except that I had to uninstall my antivirus Symantec Endpoint Protection No biggie I ll just reinstall it after the update I think it also said that the Intel WiDi Re-Installation Antivirus Win10 After Anniversary + 7559 Update Boot Not Does Dell Inspiron drivers had to be uninstalled as well which it did automatically Dell Inspiron 7559 Does Not Boot After Win10 Anniversary Update + Antivirus Re-Installation but that was all that Dell Inspiron 7559 Does Not Boot After Win10 Anniversary Update + Antivirus Re-Installation happened during that process So I attempt to do so and I was able to install it via the Dell Inspiron 7559 Does Not Boot After Win10 Anniversary Update + Antivirus Re-Installation msi file the exe file wouldn t work for some reason and the computer begins to reboot Constantly The laptop would freeze somewhere from when the login screen appears to a couple minutes after that It would hang for a couple minutes then reboot It rebooted enough times for it to go to the Windows recovery options I just told it to restart so that I could tell it to boot into safe mode on the next bootup shift-click restart when I got inside Windows It works and I then tell it to boot into safe mode Now my laptop won t boot at all It won t go past the Dell logo I can enter the BIOS and the boot options menu as well as load the ePSA diagnostics tool and have the tests pass no errors But it won t get past the Dell logo after this It doesn t restart flash lights or anything like that Just hangs on the Dell logo How can I resolve this issue

http://en.community.dell.com/support-forums/laptop/f/3518/t/19990334
Relevancy 78.26%

Strange things are happening here on my W x Pro system and I am worried After being shut down for some time I turned on this computer yesterday Monday and it finished configuring some updates that it had apparently installed last time I shut it down When shutting it down on Monday evening it again goes into installing updates but looking like it was stuck on After an hour I just let it sit over night and this morning it had shut down Then today when I turn it on in the afternoon it goes into configuring a big update before booting up taking close to minutes and restarting three or four times showing me this screen http blogs-images forbes com anton w -update jpg that I have never seen before After the half hour it tells me that it has updated my W and there are lots of new exciting things Naturally I thought that this was the Anniversary Update so I looked into the Update History and to my surprise this was entirely empty quot No updates installed yet quot it told me Then I manually clicked quot Check for new update the Long what it? Anniversary was Update... wasn't updates quot and then it finds lots of updates like quot Cumulative Update for Windows Version KB quot and a whole bunch Long update wasn't the Anniversary Update... what was it? of other Long update wasn't the Anniversary Update... what was it? updates all numbered with I am baffled here what goes on

A:Long update wasn't the Anniversary Update... what was it?

What does "winver" show?

http://www.tenforums.com/windows-updates-activation/59560-long-update-wasnt-anniversary-update-what.html
Relevancy 77.83%

I just installed the Anniversary update in Windows 10 and now my Sprout boots extremely slow. Does anybody else have this problem and any idea how to fix this?

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Windows-10-Anniversary-update/td-p/5726322
Relevancy 77.83%

Hi All.I recently got windows anniversary update and after doing it i have been getting lots of problems.I need to restart my laptop twice and then only i can stream videos online.It is happening same for media stored on my Dell laptop as well.Kindly help me so that i can fix this issue and it can be resolved also.

http://en.community.dell.com/support-forums/software-os/f/4997/t/19988936
Relevancy 77.83%

My system shows Ver 1511 10586.545, Anniversary update never comes up when I update daily? Running Windows10 64 bit Pro,should I just keeping checking for update.

http://www.tenforums.com/windows-updates-activation/62357-windows-10-anniversary-update.html
Relevancy 77.83%

Please bear with me.. I'm on my phone.. the Anniversary update must have taken over my computer. But.. is 5 hours normal? It did restart like it said a couple of times and the last percentage I saw was 59%, then the reboot again. It is "still" working on something. The circle keeps going around.
Thanks.. you're helping a "Senior" that is getting frustrated that something is wrong and doesn't know what to do.

A:Windows 10 Anniversary update

No. Not normal.

Something has gone wrong. Perhaps it will right itself, but it seems doubtful.

Have you some means of rebooting the Laptop either to a recovery disk or backup?

http://www.tenforums.com/windows-updates-activation/64913-windows-10-anniversary-update.html
Relevancy 77.83%

I'm trying to install Windows 10 anniversary update, but it says I have to unintall HP Client Security Manager first. Is there a way around this? I'm using HP Client Security Manager 8.3.18.2044. Thanks.

http://h30434.www3.hp.com/t5/Business-Notebooks/Windows-10-anniversary-update/td-p/5713565