Windows Support Forum

Stuck on build 14393: cannot update

Q: Stuck on build 14393: cannot update

I am on build 14393 and I am trying to update to 14905 or 14915, but when computer restarts after trying to update I get a message that windows is rolling back to previous version (my version 14393), without making the update. I tried through windows update, i tried also downloading the iso and update windows via iso and i tried updating via windows media creation tool. All efforts had the same result, which was rolling back to version 14393. Any thoughts? Must be a minimum hard drive space available? Cause i have 55 to 60 GB free disk space.

Relevancy 100%
Preferred Solution: Stuck on build 14393: cannot update

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Stuck on build 14393: cannot update

Is your version 14393 an Insider version?? If not you can not update to 14905 or 14915.These versions are exclusively, for now at least, reserved for the Insider. The standard version (official general release) is 14393.105 .

http://www.tenforums.com/windows-updates-activation/62473-stuck-build-14393-cannot-update.html
Relevancy 82.56%

Well that was somewhat expected I suppose but it's out now, build 14393.5 was pushed to both Slow and Release preview rings (it was released to Fast ring earlier this week on Monday). It pretty much is the Anniversary Update from all the reports and since it's been pushed now to all the rings that means it's pretty much done - the only thing now is to see it pushed to the Production ring aka general wide release which is expected on Tuesday August 2nd.

If you really can't wait to get it, it's currently available through Release Preview and I'm sure someone will throw together an ISO here in the next 24 hours or less for a clean install.

Now let the horror stories begin.
 

A:Windows 10 build 14393.5 is available and it's the Anniversary Update

There's a "14393.31" bubbling around at MS but nobody is sure if it will be "the" Anniv. build or not. Since the .5 took TWO cumulative updates after 14393.0 to get to, it's possible they could eek out one more .esd before next Tuesday.

At least this time my deployment scripts at work are 100% flawless with 14393. That November update.. oy veh what a mess.
 

https://hardforum.com/threads/windows-10-build-14393-5-is-available-and-its-the-anniversary-update.1906388/
Relevancy 82.56%

is windows 10 build 10.0.14393.51 a feature update or a just a cumulative update?
 

A:is windows 10 build 10.0.14393.51 a feature update

Just a cumulative update.
 

https://malwaretips.com/threads/is-windows-10-build-10-0-14393-51-a-feature-update.62223/
Relevancy 80.84%

Hello everyone I installed dual boot version of windows pro bit V build as an upgrade and the other as a clean installation In clean install The strange thing I found is that the users I have folders lt My account gt lt default hidden gt lt defaultuser gt it's normal While in the updated version is not present lt defaultuser gt Error in clean install evnt error Search id Gatherer Could not enumerate the user sessions for the generation of the filter pooh Details HRESULT x x and DistributedCOM id Settings specific permissions settings do not grant Local Activation permission for the COM Server application with CLSID D F F - - F - -FC C CAE e APPID F A - C- - D F- A D D to the user NT AUTHORITY SYSTEM SID S- - - address LocalHost via LRPCs running in the CIS of the applications container Not Available Not Available To change the security clearance you can use the Component Services administrative tool Error in the updated version Event ID Source EFS Message The EFS service could not run the provisioning of V.1607 14393.10 update after discovered anniversary build Errors a user for enterprise data protection Error code x I have no one game or app on another drive that is referenced by the C and Errors discovered after anniversary update V.1607 build 14393.10 DistributedCOM id Settings specific permissions settings do not grant Local Activation permission for the COM Server application with CLSID D F F - - F - -FC C CAE e APPID F A - C- - D F- A D D to the user NT AUTHORITY SYSTEM SID S- - - address LocalHost via LRPCs running in the CIS of the applications container Not Available Not Available To change the security clearance you can use the Component Services administrative tool Thank you

http://www.tenforums.com/performance-maintenance/59032-errors-discovered-after-anniversary-update-v-1607-build-14393-10-a.html
Relevancy 79.98%

We have released a Cumulative Update (KB3176925) to Windows 10 Insider Preview Build 14393 on PCs and Mobile devices which will bring the build number to 14393.3. This Cumulative Update includes a handful of fixes:

We have fixed an issue where keyboard input on some Windows tablet devices would not rotate to landscape normally.We have fixed an issue that results in Windows Updates being delayed on systems with Connected Standby.We have fixed a problem with text input with Korean Input Method Editor (IME) in some Store apps.We fixed an issue causing Store apps to stop launching due to a licensing issue.We have fixed an issue with apps that synchronize using DDE for inter-process communication.






Source: Cumulative Update to Windows 10 Insider Preview Build 14393 now available - Feedback Hub

http://www.tenforums.com/windows-10-news/57065-cumulative-update-kb3176925-windows-10-insider-preview-build-14393-a.html
Relevancy 79.98%

Place to build, 10 AU Anniversary Update 14393.10 Discussion (Initial Windows Inactive) post any issues you may have and potential solutions I have tried updating a desktop Windows 10 Anniversary Update 14393.10 Discussion (Initial AU build, Inactive) and a Surface Pro Desktop has updated but I cant install any extensions in Edge I see it says there was a problem try reinstalling the extension did that and still no Windows 10 Anniversary Update 14393.10 Discussion (Initial AU build, Inactive) joy rebooted still no luck Surface Pro is stuck on spinning gear with a blank black background for last minutes any advice EDIT Possible fix for no extensions in Edge Go to Start gt Settings gt System amp Apps and Features then uninstall the extensions will be greyed out and try again through Edge Store - should work Potential fix for no Cortana This is changinging registry value so take neccesary precautions backup etc solution was posted to a response on Microsoft site I found the answer on another thread It's a registry setting Starting RegEdit go to HKEY CURRENT USER SOFTWARE Microsoft Windows CurrentVersion Search and change Cortana and Bing permissions from to

A:Windows 10 Anniversary Update 14393.10 Discussion (Initial AU build, Inactive)

Ah, a solution. MS have handily provided a method to force the update here: http://forums.windowscentral.com/e?l...token=XgjSA_By
Download the updater and you can update straight away.

http://forums.windowscentral.com/windows-10/433950-windows-10-anniversary-update-14393-10-discussion-initial-au-build-inactive.html
Relevancy 79.12%

Next week Microsoft out Fast build ring to Windows in 10 and the 14393.5 Anniversary PCs Update rolls phones will begin rolling out the Windows Anniversary Update and it s now putting the finishing touches to the major update before that rollout begins After pushing out build a few days ago as a cumulative update to - the final RTM build although Microsoft doesn t Windows 10 Anniversary Update build 14393.5 rolls out to PCs and phones in the Fast ring use Windows 10 Anniversary Update build 14393.5 rolls out to PCs and phones in the Fast ring that terminology any Windows 10 Anniversary Update build 14393.5 rolls out to PCs and phones in the Fast ring more - it s followed up today with another bug-fixing rollup Dona Sarkar head of the Windows Insider Program announced today that Windows Anniversary Update build is now available for PCs and phones in the Fast ring According to the announcement on the Windows Feedback Hub the new update includes the following fixes We have improved reliability and performance of Microsoft Edge with AdBlock and LastPass extensions enabled These extensions should continue to work after installing other extension updates from the Store We fixed an issue causing battery to drain due to runaway CPU processes while a device is idle We also fixed a battery life issue due to the proximity sensor always running on some devices We fixed an issue causing Store apps to stop launching due to a licensing issue We have fixed an issue that results in Windows Updates being delayed on systems with Connected Standby We fixed an issue where the Korean IME would not have the correct composition on some custom TSF edit controls on PC We fixed an issue where you might not be able to type in text into Search or some Store apps without having to restart the process We have fixed an issue where keyboard input on some Windows tablet devices would not rotate to landscape normally The update is now available via Windows Update identified as KB Direct download links for Cumulative Update KB -bit x - Download -bit x - Download nbsp

A:Windows 10 Anniversary Update build 14393.5 rolls out to PCs and phones in the Fast ring

 

https://malwaretips.com/threads/windows-10-anniversary-update-build-14393-5-rolls-out-to-pcs-and-phones-in-the-fast-ring.61713/
Relevancy 74.82%

I had already done the cumulative update from 14393.5 to 14393.51 on two of our systems with no problems, but the update failed on the third system when restarting and all I see is the sp;inning wheel. I see some disk flashing to begin with then finally no more disk activity and just the wheel keeps spinning. Have tried switching off and restarting but still the same problem. PC is a Samsung all-in-one desktop. No previous problems so appears to be a software issue.
Anybody have an idea where to start?
Mikeb

http://forums.windowscentral.com/windows-10/435224-problem-win-10-cumulative-update-14393-5-14393-51-a.html
Relevancy 71.81%

If I get an .iso of Windows 10 RTM (14393) , I can install over the Preview Build (14931) I'm using without losing my personal files, Win32 programs and applications?

A:Install RTM Build (14393) over Preview Build (14931)

Yes. Mount the ISO file as virtual DVD by double clicking it and launch the Setup.exe to start upgrade.

http://www.tenforums.com/installation-setup/65102-install-rtm-build-14393-over-preview-build-14931-a.html
Relevancy 68.8%

Hey, I cannot update to the latest build of Windows 10. I'm still stuck at build 10240.

Can anyone help me to update without having to reinstall programs, apps etc.?

A:Stuck on build 10240, can't update to 1151 November update.

 HAM0511
You do not mention what error you get trying to update. Can you provide your Computer model and  message you get when you try updating to the latest Windows 10 version?
Below is a link that may help you get it installed.
How to Upgrade to Windows 10 Version 1511
For me to better assist in troubleshooting, please click my DELL-Jesse L and send me a Private Message with the Dell Service Tag number and your Dell Order number.

http://en.community.dell.com/support-forums/software-os/f/4997/t/19679023
Relevancy 66.65%

If I am not mistaken, this build is to become the anniversary update.
If I install it now, will it turn into a stable build, or will I have to reinstall?
and is it a good idea to do this?

http://www.tenforums.com/windows-insider/58045-can-i-stick-build-14393-a.html
Relevancy 66.65%

Did anyone notice that you no longer see any icon on your notification bar if the action center is closed or if you are not trying to pull the action center down .It's amazing

http://forums.windowscentral.com/ask-question/435117-change-build-14393-67-a.html
Relevancy 65.79%

when trying this upgrade I receive, "C++ runtime error; Program C:\windows... BT\Sources\SetupPlatform.exe".
I reply OK and it reverts back to Windows 10 before the upgrade.

http://www.tenforums.com/windows-updates-activation/65042-windows-10-upgrade-build-14393-a.html
Relevancy 65.79%

I could have sworn screensaver settings were under personalization, I created a text screensaver, and I want to change the text and the look.
Did they move this?

A:Where did screensaver settings go in build 14393.321?

Hi Welcome to Windows Central! They are still under personalization !

http://forums.windowscentral.com/ask-question/442590-where-did-screensaver-settings-go-build-14393-321-a.html
Relevancy 65.79%

With Build 14393, I lost my Extensions.
Had Lastpass and Amazon.
They showed in the Extensions tab, right side, but weren't operable.
I uninstalled them and now when I click on the "Get extensions from store", it open to a blank page.
Were working before I upgraded to the last build.
Pete

http://www.tenforums.com/browsers-email/56863-latest-build-14393-no-extensions.html
Relevancy 65.79%

I installed Windows Pro in May and on Thursday installed Build Everything has been working fine until today Using a new version of DuplicateCleaner versions Pro my desktops and laptops are clean and synced However I decided to update my Google Chrome and Mozilla Firefox to their most current versions using the EDGE browser with BING search In both - 10 language 14393.51 build pro gone Win settings bad cases the browsers downloaded and Win 10 pro build 14393.51 - language settings gone bad installed great that is until I went to use Chrome I received both English and Asian Chinese I believe and others I've not seen The same happened with Firefox I tried to attach PDF files but the download started but I never saw them in the Manage Attachments When I went back and tried to try downloading again the Paperclip Icon it wouldn't work As for trying to get English US only I've not been able to do so as there are no way I see to do so using Control Panel and or Settings Also I've deleted and reinstalled the browsers times with the same results Am I alone with this issue Assistance please DAN

http://www.tenforums.com/general-support/60143-win-10-pro-build-14393-51-language-settings-gone-bad.html
Relevancy 65.79%

Hello, I'd like to ask something.

1. Will I lose those KB small builds after reset PC?
2. If it lose will I able to get those KB again?

I've to ask this to make sure If I'm still on 14383.67 even after reset this PC.
I've been software testing & testing bash around too much & start getting mess.
& sometimes I want to do some spring cleaning once a week or per build.

http://www.tenforums.com/windows-insider/59749-some-questions-about-w10-insider-build-14393-a.html
Relevancy 65.79%

My hdds randomly disappear from os . I have to reboot to gain access. Failing sata ports or build issue?

http://www.tenforums.com/drivers-hardware/56939-disappearing-hdd-drives-build-14393-a.html
Relevancy 65.36%

Hello,

Windows 10 proposed me to update my Windows 10 build 10xxx to 14xxx ( xxx means parts I don't remember ). The update has sucessfuly completed, computer restarted and the login screen was displayed.

I was typing my correct password but windows was sending me at the lock screen all the time without any reason or message. I deleted the password via cmd in Windows Installer. Now it still happens but it just don't ask for the password, reloading the lock screen in loop, like you can see on this video:

Windows10 bug - YouTube

Do someone knows how can I resolve this?

http://www.tenforums.com/windows-updates-activation/63209-stuck-login-interface-after-build-update.html
Relevancy 65.36%

Hi all, I have a dell xps 13 2015 touch screen. It started an insider build update on Windows 10 a week or two back and is still stuck on 80%, howner can i fix this? Please send help.

A:Windows 10 insider build update stuck on 80%

The Insider Previews aren't stable releases they are test builds... you shouldn't use them on a primary machine. If you need to recover files follow this guide:
http://dellwindowsreinstallationguide.com/data-recovery-using-fedora/ 
You can download Windows 10 and clean install:
http://dellwindowsreinstallationguide.com/download-windows-10-oem-and-retail-iso/ 
If you want to remain on the Insider Preview. Use the Insider Preview .iso:
https://www.microsoft.com/en-us/software-download/windowsinsiderpreviewadvanced 

http://en.community.dell.com/support-forums/software-os/f/3524/t/19995927
Relevancy 65.36%

Hello,

Windows 10 proposed me to update my Windows 10 build 10xxx to 14xxx ( xxx means parts I don't remember ). The update has sucessfuly completed, computer restarted and the login screen was displayed.

I was typing my correct password but windows was sending me at the lock screen all the time without any reason or message. I deleted the password via cmd in Windows Installer. Now it still happens but it just don't ask for the password, reloading the lock screen in loop, like you can see on this video:

Windows10 bug - YouTube

Do someone knows how can I resolve this?

A:Stuck in login interface after build update

Originally Posted by Francislaw


Hello,

Windows 10 proposed me to update my Windows 10 build 10xxx to 14xxx ( xxx means parts I don't remember ). The update has sucessfuly completed, computer restarted and the login screen was displayed.

I was typing my correct password but windows was sending me at the lock screen all the time without any reason or message. I deleted the password via cmd in Windows Installer. Now it still happens but it just don't ask for the password, reloading the lock screen in loop, like you can see on this video:

Windows10 bug - YouTube

Do someone knows how can I resolve this?



Hi Francislaw and welcome to the Ten forums!

I found some similar behavior on other forums and it looks like disconnecting USB mouse helps.
So, if you have USB mouse connected, disconnect it and then run diagnostic and updates.

Edit: disconnect anything on USB...

http://www.tenforums.com/user-accounts-family-safety/63209-stuck-login-interface-after-build-update.html
Relevancy 64.93%

Latest update gives poor battery on L640. There is a UI glitch on action centre . Anyone facing these issues?

http://forums.windowscentral.com/ask-question/440180-windows-10-mobile-build-14393-189-issues.html
Relevancy 64.93%

When I tab on the Photos app it opens and immediately close again. Not opening any pics at all. Even when i use File Explorer to open my saved pic folder and try to open a pic it just opens and closes immediately. Any help ?

http://forums.windowscentral.com/ask-question/437227-have-lumia-930-os-build-10-0-14393-67-my-photos-does-not-open-all.html
Relevancy 64.93%

A new cumulative update is available for non-Insiders that are already running the Windows Anniversary Update build Insiders on the Release Preview ring got the update early this morning but it s not available in the Production ring non-Insiders As with all PC updates that show up in the Production ring there is a changelog Insiders are rarely so lucky when it comes to cumulative updates Here s what s new Improved reliability of Internet Explorer Start File Explorer action center graphics and the Windows kernel Addressed issue that was causing System Center Operations Manager SCOM Management Console to crash in State view Addressed connectivity issue from a -bit application to a Remote Desktop Gateway that doesn t have HTTP tunneling enabled Addressed issue of updates not being restored when doing a system reset even if those updates were permanently installed Addressed issue that was causing domain logon attempts to fail on a Windows Pro device after upgrading from Windows Home Addressed issue that was causing failed logon counts of non-admin users without network logon permissions to be counted as cumulative resulting in devices going into BitLocker recovery more frequently Improved support for websites by updating the HTTP Strict Transport Security HSTS preload list Improved support for IT administrators using Group PCs Windows what's 14393.351 releases Microsoft - build 10 here's new to for everyone Policy to block users Microsoft releases Windows 10 for PCs build 14393.351 to everyone - here's what's new updating the operating system from Windows Update Improved reliability and stability of the notification framework for enabling contextual notifications in File Explorer Addressed an issue that prevented System Center Configuration Manager from performing inventory uploads via Background Intelligent Transfer Service BITS when Encrypting File System EFS has been disabled Addressed additional issues with USB Wi-Fi clustering setup Microsoft Edge Internet Explorer licensing PowerShell Component Object Model COM Windows kernel graphics and Bluetooth Interestingly no build for Windows phones was offered today Build for Mobile was released to Insiders in the Release Preview and Slow rings a week Microsoft releases Windows 10 for PCs build 14393.351 to everyone - here's what's new ago so if it s available for PCs one would think that it s coming for phones soon as well We should also see another Fast ring build released this week After announcing the Creators Update yesterday Microsoft said that we d see a Preview soon nbsp

A:Microsoft releases Windows 10 for PCs build 14393.351 to everyone - here's what's new

We used to have patch Tuesday. Now we have patch whatever day.
 

https://malwaretips.com/threads/microsoft-releases-windows-10-for-pcs-build-14393-351-to-everyone-heres-whats-new.64907/
Relevancy 64.93%

From Neowin Microsoft today released new cumulative updates for all versions of PCs releases 14393.321 build phones Microsoft for and Windows including Windows Mobile as opposed to a few weeks ago when the company released to PCs but the corresponding Mobile build - - was still only available to Insiders Today s build is available to PCs Microsoft releases build 14393.321 for PCs and phones and phones on the Anniversary Update however it would seem that all devices in the Release Preview ring and phones in the Slow ring PCs on the Slow ring were updated to Redstone are still on the previous cumulative update Here s what s new Improved reliability of Bluetooth and storage file system Addressed issue causing printer drivers to not install correctly after installing security update KB Addressed issue causing sign-in errors if a password is entered incorrectly or a new password doesn t meet password complexity requirements after installing security update KB Addressed issue that required users to log out and log back in before using the application they installed using the Windows installer MSI Improved support for networks by adding new entries to the Access Point Name APN database Addressed issue that was Microsoft releases build 14393.321 for PCs and phones causing excessive battery drain on Windows Mobile when connected to Wi-Fi Addressed issue in which setting up both fingerprint and iris recognition sometimes causes the sign-in to fail on Windows Mobile Addressed issue that was causing high CPU usage on Windows Mobile Addressed additional issues with multimedia playback revised daylight saving time authentication Internet Explorer and Windows Shell Security updates to Microsoft Edge Internet Explorer Windows registry and diagnostics hub If your PC is still running Windows version also known as build or the November Update you ll see Here s what s included Improved reliability of Internet Explorer kernel mode drivers downloading apps from the Store and Windows graphics device interface GDI Addressed issue causing printer drivers to not install correctly after installing security update KB Addressed issue causing sign-in errors if a password is entered incorrectly or a new password doesn t meet password complexity requirements after installing security update KB Addressed issue that causes Internet Explorer to fail sometimes when using a user-defined style sheet Addressed issue where scrollbar position is reset after display property is set to none in Internet Explorer Addressed issue where a script in a nested frameset may not run correctly in Microsoft Edge Improved support for websites by updating the HTTP Strict Transport Security HSTS preload list Improved the upload of telemetry and download of telemetry settings in an authenticated proxy environment and support for Azure Active Directory AAD Addressed additional issues with revised daylight saving time Microsoft Edge Internet Explorer and WebDAV Security updates to kernel-mode drivers Internet Explorer Microsoft Graphics Component Windows registry and diagnostic hub Finally there aren t many PCs that are still running the original Windows build but some businesses are For those you ll get Improved reliability of Windows graphics device interface GDI Addressed issue causing printer drivers to not install correctly after installing security update KB Addressed issue causing sign-in errors if a password is entered incorrectly or a new password doesn t meet password complexity requirements after installing security update KB Addressed issue that causes Internet Explorer to fail sometimes when using a user-defined style sheet Improved support for networks by adding new entries to the Access Point Name APN database Improved support for websites by updating the HTTP Strict Transport Security HSTS preload list Addressed issue with revised daylight saving time Addressed additional issues with Internet Explorer and licensing Security updates to Microsoft Edge Internet Explorer ke... Read more

https://malwaretips.com/threads/microsoft-releases-build-14393-321-for-pcs-and-phones.64363/
Relevancy 64.93%

A few weeks ago MS Released build As I'm on the fast ring got and installed the build Then it released But installations would always fail It would show me the installation process and then restart as it usually would roll on cannot build update, back stuck 14901: cannot However after logging in I would see that I'm still on build A minute stuck on build 14901: cannot update, cannot roll back later there would be a popup message saying that quot some updates were not installed select this message for more details quot None were given when I did I thought I'd just wait for the next build stuck on build 14901: cannot update, cannot roll back that it was a problem with But now that the next build is out I still keep running into the same problem Unfortunately I cannot uninstall updates update history is empty nor can I roll back to the previous build through advanced startup quot there was a problem rolling back to your previous build try resetting this PC first quot I currently cannot afford to reset this PC is there another way

http://www.tenforums.com/windows-insider/62259-stuck-build-14901-cannot-update-cannot-roll-back.html
Relevancy 64.5%

Hi folks,

As the thread title says, can anyone please tell me where can I download a legitimate, genuine Windows 10 1607 Build 14393.10 .iso file?

Thanks

Art

A:Where can I download Windows 10 1607 Build 14393.10 .iso file?

About as genuine as your going to get. Windows 10 ISO Download

http://www.tenforums.com/installation-setup/61756-where-can-i-download-windows-10-1607-build-14393-10-iso-file.html
Relevancy 64.5%

Microsoft today released a new cumulative update for Windows Insiders on the Release Preview and Slow rings Build comes one day after the company offered Mobile build to Insiders Unlike when the Windows Mobile build was released today s update comes with a changelog which can be found in the Feedback Hub Fortunately the release notes for today s build also applies to the one for phones Improved reliability of the Windows Update Agent shared drives virtual private network VPN clustering HTTP downloads Internet Explorer Hyper-V platform multimedia playback and Microsoft Edge Improved performance of push and local notifications Hyper-V platform and some social media websites using Microsoft Edge Addressed issue where mapping a drive from an elevated command prompt doesn t work with administrator Windows what's - 10 Insiders 14393.222 for Microsoft build PCs here's new releases to credentials Addressed issue causing movies that were ripped using the transport stream ts format to play without sound in Windows Microsoft releases Windows 10 for PCs build 14393.222 to Insiders - here's what's new Media Player and the Xbox One Media Player app Addressed issue causing the Movies amp TV app on the Xbox to stop working when attempting to play content that was just purchased from the Store Improved support for networks by adding new entries to the Access Point Name APN database Addressed issue causing Print all linked documents to not work in Internet Explorer Addressed issue preventing some users from changing the Microsoft releases Windows 10 for PCs build 14393.222 to Insiders - here's what's new default download location in Windows Mobile Addressed issue causing unnecessary notifications about fixing Microsoft account in Windows Mobile Addressed additional issues with multimedia Windows kernel Windows shell enterprise security storage file system Remote Desktop core platform Hyper-V platform Windows Update for Business display kernel near field communication NFC input and composition Bluetooth Microsoft Lync compatibility Windows Storage Microsoft releases Windows 10 for PCs build 14393.222 to Insiders - here's what's new API app registration Trusted Platform Module Group Policy Internet Explorer virtual private network VPN BitLocker wireless networking datacenter networking Cortana PowerShell Active Directory connection manager and data usage Microsoft Edge Windows Recovery Environment file clustering Universal Windows Platform UWP apps audio playback settings DShow Bridge app compatibility licensing cloud infrastructure domain name system DNS server network controller USB barcode reader and Adobe Flash Player This Cumulative Update is the same for both PC and Mobile except that for PC it includes an additional fix to improve the reliability of downloading games like Forza Horizon and game updates from the Windows Store We re actually not seeing the update on our test PC that s on the Release Preview ring so if you don t have it yet you re not alone It will likely show up shortly If you re waiting for it to hit Production it will likely be two weeks until you see it as that s the next Patch Tuesday nbsp

https://malwaretips.com/threads/microsoft-releases-windows-10-for-pcs-build-14393-222-to-insiders-heres-whats-new.63874/
Relevancy 64.5%

I'm currently trying to download Forza Horizon 3, but the only problem is that I only have ~25GB left on my SSD C: drive. When I go into the system settings and try to change the default save location for Apps, it will let me choose my E: drive, but as soon as I hit apply it just reverts to the C: drive. It let's me change the locations for all of the other options, but as soon as I try to change the locations for Apps it just resets all other save changes I've made.
After a bit of searching for a fix to this I discovered that the Store will ask you where you want to download something if the download is large enough. This is perfect except every time I try to download Forza and choose my E: as the download location, the Store just crashes. No error codes or anything.
Any help would be much appreciated.

A:Cannot Change Default App Download Location, Build 14393.187

Hello, have a look through this- it may help.
Apps Save Location - Change in Windows 10 - Windows 10 Forums

You could try resetting the Store:
App - Reset in Windows 10 - Windows 10 Forums

http://www.tenforums.com/software-apps/64831-cannot-change-default-app-download-location-build-14393-187-a.html
Relevancy 64.5%

I cant find FM radio APP for Windows 10 KB3176931 build 14393.67
Was FM radio app removed in this update ??
I am using lumia 640xl lte.

A:Missing FM radio APP for Windows 10 KB3176931 build 14393.67

Originally Posted by Windows Central Question I cant find FM radio APP for Windows 10 KB3176931 build 14393.67
Was FM radio app removed in this update ??
I am using lumia 640xl lte. Radio was removed from o.s., use a free Radio app in Store , there are some very nice

http://forums.windowscentral.com/ask-question/436606-missing-fm-radio-app-windows-10-kb3176931-build-14393-67-a.html
Relevancy 64.5%

Microsoft today released the first cumulative update for the Windows Anniversary Update since its release a week ago KB brings the build number to As with most cumulative updates don t expect to see any new features Instead it focuses on fixes and improvements Here s what s new Improved reliability for Internet Explorer Addressed issue to keep pen click settings after updating to Windows Version Addressed issue that may cause Windows Mobile devices to hang after turning Bluetooth on and off very quickly Security updates to Kernel Mode Drivers Microsoft Graphics Component Microsoft Edge Internet releases build PCs Microsoft 10586.545 10 what's here's Windows - for 14393.51, new Explorer and Windows Authentication Methods Of course not everyone is on the Anniversary Update yet and today is Patch Tuesday so everyone gets a patch Microsoft also released build for the November Update Version and for the original Windows release Here are the improvements in Improved reliability by allowing more time for devices to recover from connected standby mode Addressed issue affecting some devices with Bitlocker enabled that didn t start up to the BitLocker password entry screen Addressed issue with MouseUp and MouseDown events not working correctly when using a scroll bar in an Inline Frame IFrame Addressed issue that delays the display of content when resizing the Internet Explorer browser window Addressed issue with special keys and mouse clicks that don t work on devices when Remote Assistance is in session Addressed issue with rendering Microsoft releases Windows 10 for PCs build 14393.51, 10586.545 - here's what's new multi-pixel points in Web Graphics Library WebGL Addressed additional issues with certain devices that can t transition from connected standby to sleep mode updates not installing and Internet Explorer Security updates to Internet Explorer Microsoft Edge Kernel Mode Microsoft releases Windows 10 for PCs build 14393.51, 10586.545 - here's what's new Drivers Windows Authentication Methods Microsoft Graphics Component and Kernel Mode Blacklist There are very few consumers that are still running the original version of Windows build - but there are a number of businesses using it Here s what s new in Improved reliability for Internet Explorer and WebDAV shares Addressed issue affecting some devices with Bitlocker enabled that didn t start up to the BitLocker password entry screen Addressed issue with MouseUp and MouseDown events not working correctly when using a scroll bar in an Inline Frame IFrame Addressed issue that delays the display of content when resizing the Internet Explorer browser window Addressed issue in DNS Subnet Prioritization that was impacting network connectivity Addressed issue with OLE drag and drop that prevents the download of more than one item per operation Addressed additional issues with revised daylight saving time updates not installing Internet Explorer and the Windows kernel Security updates to Kernel Mode Blacklist Microsoft Edge Internet Explorer Microsoft Graphics Component Windows Authentication Methods the lock screen Kernel Mode Drivers and Secure Boot All of the PC builds mentioned above are available right now for everyone that s using the build that the number corresponds with You can grab them by heading to Settings - gt Update amp security - gt Windows Update - gt Check for updates nbsp

https://malwaretips.com/threads/microsoft-releases-windows-10-for-pcs-build-14393-51-10586-545-heres-whats-new.62166/
Relevancy 64.5%

Insiders on the Slow and Release Preview rings found a cumulative update waiting for them today specifically Windows build for PC and Mobile At the time there wasn t a changelog available PCs fixed got 14393.103 for 10 improved in build and what Windows Here's phones and however one has since been published As you might expect there aren t any new features to be seen in a cumulative update however there are a number of Here's what got fixed and improved in Windows 10 build 14393.103 for PCs and phones fixes and improvements Here s what s new in Windows build Improved reliability of the Windows Here's what got fixed and improved in Windows 10 build 14393.103 for PCs and phones Ink Workspace Microsoft Edge File Server Windows kernel Microsoft Component Object Model COM Cluster Health Service Hyper-V Multi-Factor Authentication MFA NTFS file system PowerShell Internet Explorer facial recognition graphics Microsoft Store and Windows Shell Improved performance for the speed of purchasing Store apps Improved battery life of wearable devices such as the Microsoft Band while Bluetooth is connected and idle Improved compatibility of using Xbox One controllers with various games Addressed issue with incorrect character mapping between Japanese and Unicode for the question mark symbol Addressed issue that prevents the download and initialization of NET objects in Internet Explorer Improved support for new near-field communication NFC chips for Windows Mobile Addressed issue with game or app audio not resuming after ending a call on Windows Mobile Addressed additional issues with compatibility Remote Desktop BitLocker PowerShell Direct D networking policies Dynamic Access Control DAC rules Microsoft Edge Connected Standby mobile device management MDM printing Fingerprint logon and Cortana The notes list quot PowerShell quot in passing although the previous update on PCs broke DSC Microsoft has promised a fix on August and it s unknown whether this is a preview of the upcoming update There are also a number of other issues in the Anniversary Update that the changelog doesn t call out Users are finding that plugging in a Kindle causes Windows to crash and millions of webcams are broken Clearly Microsoft has a lot to fix over the next few updates nbsp

https://malwaretips.com/threads/heres-what-got-fixed-and-improved-in-windows-10-build-14393-103-for-pcs-and-phones.62753/
Relevancy 64.5%

Today known and build for are Windows fixes, Here the 14393 in issues 10 PCs improvements, Microsoft released Windows Insider Preview build for PC and Mobile to the Here are the fixes, improvements, and known issues in Windows 10 for PCs build 14393 Fast ring Unsurprisingly there are Here are the fixes, improvements, and known issues in Windows 10 for PCs build 14393 no new features of note After all the Anniversary Update is only about two weeks away now The new build Here are the fixes, improvements, and known issues in Windows 10 for PCs build 14393 instead focuses on fixes and improvements Here s what got fixed and improved in Windows for PCs build We have improved the reliability of Start Cortana and Action Center You should now be able to mount iPods as USB mass-storage devices Here is the lone known issue We are aware of certain cases in which Surface Books and Surface Pro s may bugcheck bluescreen due to a camera driver issue An updated driver will roll-out via Windows Update soon that will fix this There have been reports by some that say that build is the RTM build meaning that it s the build that non-Insiders will get as the Anniversary Update Since the known issue is clearly labeled as something that will come as a driver update rather than a new build this is entirely possible If you re on the Fast ring you can grab build by heading to Settings - gt Update amp security - gt Windows Update - gt Check for updates If you re not and you want to be go to Windows Update - gt Advanced options turn on Insider builds and when your PC reboots go back and set it to the Fast ring nbsp

A:Here are the fixes, improvements, and known issues in Windows 10 for PCs build 14393

Hi,

I found ESD download links for build 14393

Download
ESD Decrypter

Use decrypt-esddecrypt to decrypt ESD to ISO.

Regards,
Kardo
 

https://malwaretips.com/threads/here-are-the-fixes-improvements-and-known-issues-in-windows-10-for-pcs-build-14393.61480/
Relevancy 64.5%

I have my WP updated to 10.0.14393.67. However VPN seems not working. How? VPN is connected but there is no "lock" sign appeared like previous builds. When I check the ip address: whatismyip dot com, there is still the ip in Hong Kong, my home country. VPN seems not working.

A:[Windows 10 mobile] Updated to 10.0.14393.67 build, VPN not work

[see the attachment]
It is so strange to see VPN is connected but the lock sign does not appear. The previous build shows the lock sign.

http://forums.windowscentral.com/ask-question/437357-%5Bwindows-10-mobile%5D-updated-10-0-14393-67-build-vpn-not-work.html
Relevancy 64.5%

Microsoft today released Windows build for both PC and Mobile to the Fast Slow and Release Preview rings This is actually the second cumulative update that the company released today was released to Insiders and non-Insiders alike earlier in the day KB offers everything that we saw in with a couple of additions In other words if you ve already updated your PC once today this is all that s new Addressed issue that causes significantly reduced battery life on Windows Phone when using Bluetooth with Hey Cortana feature enabled Addressed issue that prevents users from completing the out-of-box experience OOBE with a local account using Korean characters If you re on Windows Mobile you haven t received and Here's Windows what's 14393.67 fixed and in phones PCs for build 10 improved a cumulative update since so you ll get everything above as well as the following Addressed issue that may cause Windows Mobile devices to hang after turning Bluetooth on and off very quickly You can check out the full changelog from here but that was the only part of it that could apply to Windows Mobile Microsoft Here's what's fixed and improved in Windows 10 build 14393.67 for PCs and phones is now gearing up to begin releasing builds from its development branch again which are codenamed Redstone Rs We re expecting to see Rs soon so if you re on the Fast ring don t get too Here's what's fixed and improved in Windows 10 build 14393.67 for PCs and phones comfortable nbsp

A:Here's what's fixed and improved in Windows 10 build 14393.67 for PCs and phones

Downloading now
Will post back with any new issues found, if any
 

https://malwaretips.com/threads/heres-whats-fixed-and-improved-in-windows-10-build-14393-67-for-pcs-and-phones.62175/
Relevancy 64.07%

Hi I have a Packard Bell OneTwo S It 10240 10 build Can't Anniversary on install update, stuck Windows came factory installed with W I upgraded to W last year after difficulty - upgrading to W via Windows update would Can't install Windows 10 Anniversary update, stuck on build 10240 not work kept installing to a certain percentage then would reboot to a blank screen and freeze indefinitely I needed Can't install Windows 10 Anniversary update, stuck on build 10240 to power off Can't install Windows 10 Anniversary update, stuck on build 10240 then on restart it would roll back to W This happened repeatedly despite trying all sorts - clean boots uninstalling antivirus and updating drivers etc I finally installed W using Media creation tool Everything ran fine But when the big update came in Novmember that failed to in the same way as above however all other monthly windows updates install fine Windows update never tried to push the Nov update on me again - I'm still on build now I was prompted to install the anniversary update by Windows update last week but that also failed in the same way as above Download ok and begins installing fine then at some point after complete I get the blank screen indefinitely and have to power off then it reverts back to W build Having checked Packard Bell website my model is not supported by Packard Bell for W and they are not providing any drivers for it This may explain the problems Can anyone suggest how to find out what the problem is and if there is a solution I've tried looking in Update history for error codes but there is none it doesn't even show an attempt to install the anniversary update Like i said every other monthly update since last year installs fine its just the big builds that won't Thanks

A:Can't install Windows 10 Anniversary update, stuck on build 10240

Hi, simplest answer is avoid windows update and create the appropriate bootable medium or iso and use it as you did before.
As you know plenty of people have this sort of problem.

Note that the upgrade can introduce new issues for some (search the net), and some are delaying because of that. Older machines like yours could well exhibit such problems. So before you make this change, I recommend you create a disk image of your existing setup - a procedure you should do routinely anyway- to give another way of restoring your system.
E.g. Macrium Reflect (free) + its boot medium + external storage for images.

It's best to have a physical bootable medium as it covers all of:
a. if you need to repeat the installation
b. as a bootable medium for recovery options
c. in case you need to do an in-place upgrade repair install

without taking up disk space.

http://www.tenforums.com/windows-updates-activation/61022-cant-install-windows-10-anniversary-update-stuck-build-10240-a.html
Relevancy 63.64%

My Creative Sound Blaster PCI Express X-Fi Titanium worked just fine with Win 10 (64-bit) prior to the so-called "Anniversary Update" Any solutions would be appreciated.

http://www.tenforums.com/drivers-hardware/69708-no-audio-sound-blaster-pci-express-x-fi-titanium-build-14393-447-a.html
Relevancy 62.78%

Microsoft has begun to rollout Build 14393.82 for Windows Insiders in the Release Preview ring. On PC, the latest update is KB3176932. This is a cumulative update so, while the release notes haven?t been published yet, it?s safe to say that it contains mostly bug fixes and small improvements instead of launching any major new features.

It?s important to emphasise that this update is for those special Windows 10 andWindows 10 Mobile users who have been enrolled in the Windows Insiders program. This program consists of volunteers who offer to run preview builds of the Windows 10 and Windows 10 Mobile operating systems on their own devices. Microsoft uses these users as a way to test the stability and security of special features and functions before rolling them out to the general population.
 

https://malwaretips.com/threads/microsoft-releases-windows-10-build-14393-82-for-insiders-in-release-preview.62466/
Relevancy 62.35%

I've wanted to download an app called Clamour, but I need a newer version of Windows Phone 10. I am part of the insider preview, and have searched for updates, however, I have no updates waiting yet. I thought the update rolled out to the Lumia 950. Has it not yet or am I missing something?

http://forums.windowscentral.com/ask-question/440677-how-exactly-can-i-update-my-lumia-950-windows-phone-10-anniversary-update-14393-0-a.html
Relevancy 62.35%

I just got this update and restarted my PC. Now Cortana is not there even after I set my region language and speech to united states. Help
Posted via the Windows Central App for Android

A:Cortana disappeared from anniversary update after getting the cumulative update 14393.10

Originally Posted by buddy007 I just got this update and restarted my PC. Now Cortana is not there even after I set my region language and speech to united states. Help
Posted via the Windows Central App for Android try a restart and check again
It does not appear in apps list?

http://forums.windowscentral.com/windows-10/434224-cortana-disappeared-anniversary-update-after-getting-cumulative-update-14393-10-a.html
Relevancy 62.35%

Microsoft today released a late-afternoon cumulative update today for PCs in the Release Preview rings of the Windows Insider Program today KB brings the build number to In case you ve got some type of photographic memory and KB looks familiar to you that s because it Preview PCs to and 14393.105 Microsoft releases Release Slow Windows build for the 10 rings is It s the same KB number as was seen in the last cumulative update that Insiders got which was for PC and Mobile Today s update does not have a counterpart for Windows phones The last update to hit the Production ring non-Insiders for PCs was which broke PowerShell DSC At the time Microsoft promised to have a fix available on August which happens to be today That update wouldn t happen as planned Microsoft releases Windows 10 for PCs build 14393.105 to the Release Preview and Slow rings It was assumed that today s update had it been released would have been Presumably the company found a bug in last week s cumulative update that prevented it from being shipped to non-Insiders forcing today s release There is no changelog available yet for today s update which isn t entirely surprising It s likely however that it s almost the same as was since it has the same KB number nbsp

A:Microsoft releases Windows 10 for PCs build 14393.105 to the Release Preview and Slow rings

Thanks Kardo, I will retry this version and see if I get the same boot loop.
I sure hope not, I hate having updates disabled.
Thanks for the Heads Up
 

https://malwaretips.com/threads/microsoft-releases-windows-10-for-pcs-build-14393-105-to-the-release-preview-and-slow-rings.62911/
Relevancy 61.49%

The change happened after I reset my phone, before the rest, time shows in 12 hours' format. i have set the region and time zone as same as it was, before the reset but now I'm seeing 24 hour format. There should be a way to change this, please help me

A:Hi , my device is running Windows 10 mobile insider preview build 14393.5 I want my phone to show

go to >> SETTINGS >> Time & Language >> Date & Time ... then switch the toggle for 24 hour clock.
Hope this helps, there was another interminable thread w setting on PC.

http://forums.windowscentral.com/ask-question/434665-hi-my-device-running-windows-10-mobile-insider-preview-build-14393-5-i-want-my-phone-show.html
Relevancy 61.49%

The change happened after I reset my phone, before the rest, time shows in 12 hours' format. i have set the region and time zone as same as it was, before the reset but now I'm seeing 24 hour format. There should be a way to change this, please help me

A:Hi , my device is running Windows 10 mobile insider preview build 14393.5 I want my phone to show

go to >> SETTINGS >> Time & Language >> Date & Time ... then switch the toggle for 24 hour clock.
Hope this helps, there was another interminable thread w setting on PC.

http://forums.windowscentral.com/windows-10-mobile-insider-preview/434665-hi-my-device-running-windows-10-mobile-insider-preview-build-14393-5-i-want-my-phone-show.html
Relevancy 58.91%

I'm on the fast ring and my phone updated to 14393.67 last night. I assume this is the 'anniversary' update.

A:Phone update to 14393.67 last night

Production ring got it too.

http://forums.windowscentral.com/ask-question/435102-phone-update-14393-67-last-night.html
Relevancy 58.48%

I have updated my PC TABLET Phone to pc amp tablet phone But last night I tried to update one of my notebooks gt Ran the Windows pre-diagnostics came back saying I needed another GB on my SSD C Drive check with Windows com support page and it recommended among other things which I did also to delete the downloads I just moved them to D Drive gt Hit Try Again the download went fine no hangs gt After download was complete went through the quot Let's get started quot ritual gt Computer made its way to my Sign in Notebook a Need little Major on: issue on help 14393.xxx to a Update Screen Great I signed in Great I noticed that my Bluetooth mouse Need a little help on: Major issue on a Notebook Update to 14393.xxx was working all one its own - this hasn't happen since I installed Widows in July without having to removing the device rediscovering it and re-Pair - every time the computer sat for a period of inactivity MAJOR Great gt ALL seem fantastic started Netflix and watched about mins of a show THEN it began Netflix buffering red circle appeared no big deal Need a little help on: Major issue on a Notebook Update to 14393.xxx stayed there for too long concern for my other devices PC amp Tablet had the same lockup issue earlier that day - and the only way to break the lock was to Hard re-Start power down the PC and Soft restart the Tablet - so I did a Power Down on the notebook mouse moved but could not activate a function gt Had to do this repeatedly for I kept getting the same result now after a couple of mins the computer goes into a state of quot NO response quot gt Any suggestion for a Fix would be quot greatly quot appreciated Thanks

http://forums.windowscentral.com/windows-10/435212-need-little-help-major-issue-notebook-update-14393-xxx.html
Relevancy 58.05%

Version Build is the one I am running I don't know what happened but it is just stuck there at I tried several solutions that I found on this forum and googling around but no success so far The main two that I tried several times were ---- ---- stopping the wuauserv by going into CMD as an administrator and running net stop wuauserv then deleting all the files in C Windows SoftwareDistribution then restarting the service and requesting the update again but still at even after leaving my computer on for a couple of days ----- ------- the second one was using the quot Update troubleshooter quot from windows which is linked both here and in the Microsoft Forums but that didn't do anything I tried to do both by doing slight variations during the process such 14372 update STUCK Build Version 10.0.14372 Windows AT 0% as stopping restarting the bits service after stopping restarting the Windows update STUCK AT 0% Version 10.0.14372 Build 14372 wuauserv first method or restarting the computer before running the commands But no success yet I don't feel reinstalling windows and installing all my programs again since I am crunching hours trying to finish a project and the only reasons why I am desperate to fix this problem is because I am getting a warning saying that my PC will restart every few hours If I don't solve this issue You can see the Windows update STUCK AT 0% Version 10.0.14372 Build 14372 screenshots below first image is the stuck at screenshot - second image is the warning from windows saying that my pc will restart every few hours

http://www.tenforums.com/windows-updates-activation/64527-windows-update-stuck-0-version-10-0-14372-build-14372-a.html
Relevancy 58.05%

Hi

Seems to have recently happened for no reason.
Fast Boot is live in Bios and Power Options,
Hibernate has not been disabled.
Boots normally from cold.
USB lighting options showing on 1st boot from soft restart from desktop, but then goes into limbo.
Press PC reboot button ( not boot up ) and starts normally.

Please advise

http://www.tenforums.com/general-support/62093-windows-10-build-14393-103-requires-restart-button-pressed-twice.html
Relevancy 58.05%

(Dell XPS 8500, 24GB, 1GB mSata system drive, two Toshiba USB3.0 attached hard drives)
I have a storage space set up on my Windows 1607 primary computer. (Storage Spaces is a feature of Windows 8.1 and later and Server 2012 and later.) It is set up with a normal pair of large capacity hard drives and is in two-way mirrored configuration, formatted ReFS. I see the "reduced resiliency warning" but both drives are marked as "OK." What is the meaning of the "reduced resiliency" warning and what is required to remove it"? I get the same warning with a similar storage space configuration on my test box, the only difference being that it is formatted NTFS.

(posted also in Microsoft Communities)

http://www.tenforums.com/drivers-hardware/67745-storage-space-shows-reduced-resiliency-warning-build-14393-a.html
Relevancy 57.62%

After updating to W insider fast ring build on my Lenovo G notebook the Fn Up brightness control key combination has stopped working To check if Fn Down was working I pressed them and the brightness went down to quot quot and now the screen is always black both while plugged-in and unplugged Hence I'm not able to increase the brightness anymore FYI the quot Up quot arrow button works normally but the combination quot control brightness working zero. after Brightness is at W10 not 14393.10. Fn+Up updating build to Fn Up quot doesn't work while quot Fn Down quot does Safe Mode doesn't allow adjustment of brightness since it cannot load the display driver I tried installing a third-party brightness control software while in Safe Mode but then realized it won't work until I log in to my account in normal mode which I cannot do since the brightness is at zero Please help me asap PS - I have managed to increase the brightness for now but still the combination isn't working Fn Left arrow key combination also not working for volume down while Fn Right arrow for volume up is working

A:Fn+Up brightness control not working after updating to W10 build 14393.10. Brightness is at zero.

you can change brightness settings from settings itself instead of using the keys - just to make things easier

http://forums.windowscentral.com/ask-question/434034-fn-up-brightness-control-not-working-after-updating-w10-build-14393-10-brightness-zero.html
Relevancy 57.19%

After updated my surface book to windows 10 redstone, I found my cpu frequence is always on max with no high cpu usage program run backgound.And under battery mode, cpu frequence stay on 2.47gzh(i5-6300u) and can not turbo to 2.9ghz, is anyone has the same issue?
Sorry for my poor English.

http://forums.windowscentral.com/ask-question/434400-surface-book-cpu-frequence-always-max-after-update-windows10-redstone-14393-a.html
Relevancy 56.33%

Place to post any issues you may have and potential solutions I have tried updating a desktop and a Surface Pro Desktop has updated but I cant install any extensions in Edge I see it says there was a problem try reinstalling the extension did that and Windows 14393.10 Update 10 (Production Anniversary Ring/Official) Discussion still no joy rebooted still no luck Surface Pro is stuck on spinning gear with a blank black background for last minutes any advice EDIT Possible fix for no extensions in Edge Go to Start gt Settings gt System amp Apps and Features then uninstall the extensions will be greyed out and try again through Edge Store - should work Potential fix Windows 10 Anniversary Update 14393.10 Discussion (Production Ring/Official) for no Cortana This is changinging registry value so take Windows 10 Anniversary Update 14393.10 Discussion (Production Ring/Official) neccesary precautions backup etc solution was posted to a response on Microsoft site I found the answer on another thread It's a registry setting Starting RegEdit go to HKEY CURRENT USER SOFTWARE Microsoft Windows CurrentVersion Search and change Cortana and Bing permissions from to

A:Windows 10 Anniversary Update 14393.10 Discussion (Production Ring/Official)

Ah, a solution. MS have handily provided a method to force the update here: http://forums.windowscentral.com/e?l...token=XgjSA_By
Download the updater and you can update straight away.

http://forums.windowscentral.com/windows-10/433950-windows-10-anniversary-update-14393-10-discussion-production-ring-official.html
Relevancy 56.33%

Microsoft rolls out cumulative updates to Windows PCs Windows Central Issues Bugs Solutions For all things Build of Windows Discuss it all here Basic tip If you're having any issues with your device try a reset Settings gt Update amp security gt Recovery gt Reset this PC gt This provides you with two options keep my files and remove everything Keep my files Does just as its name describes If you choose the setting you can reinstall Windows without having to back up any of the pictures videos music and documents that you have stored on it You absolutely should back up these 14393.82 Windows Update non-Insider) Cumulative 1, Official/Production: (Redstone 10 things just in case but you shouldn t need to Windows 10 Official/Production: Cumulative Update 14393.82 (Redstone 1, non-Insider) use that back up Keep My Files requires a certain amount of free space on your device As such it may be unavailable to you if your device is stuffed with a lot of files If you get an error message asking for more storage when you choose this option you ll need to back up your files and choose the remove everything option You could also delete any files that you aren t using on your device and try the option again This option will take longer than the other options Remove Everything Deletes every file every setting from your device and gives you a blank Windows 10 Official/Production: Cumulative Update 14393.82 (Redstone 1, non-Insider) copy of Windows to work with You ll need to add Windows 10 Official/Production: Cumulative Update 14393.82 (Redstone 1, non-Insider) any files you have backed up to your device again Microsoft is rolling out two updates to Windows on the PC for non-Insider users while also rolling out one for Insiders in the Release Preview ring One of the two updates is the same cumulative download that was rolled out last week to Insider members in the Release Preview update ring which fixed a number of bugs following the release of the Windows Anniversary Update The other new update for both Release Preview and production versions of Windows has the support number KB and according to Microsoft's change log quot this update makes stability improvements for the Windows Version servicing stack quot There's no word yet on when the update will be released for all non-Insider Windows Mobile users as well

http://forums.windowscentral.com/windows-10/436827-windows-10-official-production-cumulative-update-14393-82-redstone-1-non-insider.html
Relevancy 56.33%

I am creating an Ionic with Angular based hybrid app for Android, iOS & Windows.The app has a functionality select dropdown which was working fine in all three platforms. Once my Windows10 device(950XL) updated to latest version -10.0.14393.189, its crashing the app on tapping on the select box. When I had the old version-10.0.14393.67, the app was working fine. I tested few cordova apps in the same device has the same issue on tapping on dropdown. Kindly help me out to sort this issue

http://forums.windowscentral.com/ask-question/440700-hybrid-app-windows10-device-950xl-after-latest-update-version-10-0-14393-189-a.html
Relevancy 56.33%

Windows PC cumulative build rolls out to all users Windows Central Issues Bugs Solutions For all things Build of Windows Discuss it here Basic tip If you're having any issues with your device try a reset Settings gt Update amp security gt Recovery gt Reset this PC gt This provides you with two options keep my files and remove everything Keep my files Does just as its name describes If you choose Official/Production: (Redstone Inactive) Update Cumulative 1, 10 14393.105 Windows the setting you can reinstall Windows without having to back up any of the pictures videos music and documents that you have stored on it You absolutely should back up these things just in case but you shouldn t need to use that back up Keep My Files requires a certain amount of free space on your device As such it may be unavailable to you if your device is stuffed with a lot of files If you Windows 10 Official/Production: Cumulative Update 14393.105 (Redstone 1, Inactive) get an error message asking for more storage when you choose this option you ll need to back up your files and choose the remove everything option You could also delete any files that you aren t using on your device and try the option again This option will take longer than the other options Remove Everything Deletes every file every setting from your device and gives you a blank copy of Windows to work with You ll need to add any files you have backed up to your device again Here's a Changelog Improved reliability Windows 10 Official/Production: Cumulative Update 14393.105 (Redstone 1, Inactive) of the Windows Ink Workspace Microsoft Edge File Server Windows kernel Microsoft Component Object Model COM Cluster Health Service Hyper-V Multi-Factor Authentication MFA NTFS file system - PowerShell Internet Explorer facial recognition graphics Microsoft Store and Windows Shell Improved performance for the speed of purchasing Store apps Improved battery life of wearable devices such as the Microsoft Band while Bluetooth is connected and idle Improved compatibility of using Xbox One controllers with various games Addressed issue with incorrect character mapping between Japanese and Unicode for the question mark symbol Addressed issue that prevents the download and initialization of NET objects in Internet Explorer Improved support for new near-field communication NFC chips for Windows Mobile Addressed issue with game or app audio not resuming after ending a call on Windows Mobile Addressed additional issues with compatibility Remote Desktop BitLocker PowerShell Direct D networking policies Dynamic Access Control DAC rules Microsoft Edge Connected Standby mobile device management MDM printing Fingerprint logon and Cortana

A:Windows 10 Official/Production: Cumulative Update 14393.105 (Redstone 1, Inactive)

How much size of This CU ?

http://forums.windowscentral.com/windows-10/437893-windows-10-official-production-cumulative-update-14393-105-redstone-1-inactive.html
Relevancy 56.33%

Microsoft pushes out batch 14393.447 1, 10 (Redstone Cumulative non-Insider) Windows Update Official/Production: of cumulative updates for Windows Windows Central Issues Bugs Solutions For all things Build of Windows Discuss it here Basic tip If you're Windows 10 Official/Production: Cumulative Update 14393.447 (Redstone 1, non-Insider) having any issues with your device try a reset Settings gt Update amp security gt Recovery gt Reset this Windows 10 Official/Production: Cumulative Update 14393.447 (Redstone 1, non-Insider) PC gt This provides you with two options keep my files and remove everything Keep my files Does just as its name describes If you choose the setting you can reinstall Windows without having to back up any of the pictures videos music and documents that you have stored on it You absolutely should back up these things just in case but you shouldn t need to use that back up Keep My Files requires a certain amount of free space on your device As such it may be unavailable to you if your device is stuffed with a lot of files If you get an error message asking for more storage when you choose this option you ll need to back up your files and choose the remove everything option You could also delete any files that you aren t using on your device and try the option again This option will take longer than the other options Remove Everything Deletes every file every setting from your device and gives you a blank copy of Windows to work with You ll need to add any files you have backed up to your device again Here's a Changelog Improved reliability of Windows Shell map apps Internet Explorer and Microsoft Edge Addressed issue causing push-button reset to not work correctly and roll back on devices with language set to any of the Unicode languages Addressed issue causing devices to crash after disconnecting an e-reader that was attached to the device Addressed issue causing devices to not recognize a Secure Digital SD card if it is inserted and removed multiple times Addressed issue causing some apps to not respond to the commands in the app bar in Windows Mobile Addressed issue that sometimes blocks alarm notifications in Windows Mobile Improved support for using the camera app in Windows Mobile Enterprise Addressed additional issues with rendering K resolution missing Start menu tiles when running on battery Internet Explorer Microsoft Edge Bluetooth compatibility graphics display rotation app compatibility Wi-Fi Feedback Hub Miracast Windows Shell revised daylight saving time and USB Security updates to Microsoft Edge Internet Explorer Microsoft Graphics Component Windows kernel and Adobe Flash Player

A:Windows 10 Official/Production: Cumulative Update 14393.447 (Redstone 1, non-Insider)

The Anniversary update went ok on my home PC but on my Chuwi HI12 tablet Edge become very unstable, webpages stopped responding very often but this last update seems to have fixed that...anyone felt the same?
Cheers

http://forums.windowscentral.com/windows-10/439308-windows-10-official-production-cumulative-update-14393-447-redstone-1-non-insider.html
Relevancy 56.33%

Windows gets its first post-Anniversary Update cumulative patch with build Windows Central Issues Bugs Solutions For all things Build of Windows Discuss it all here Basic tip If you're having any issues with your device try a reset Settings gt Update amp security gt Recovery gt Reset this PC gt This provides you with two options keep my files and remove everything Keep my files Does just as its name describes If you choose Cumulative Inactive) (Redstone Update 14393.51 Windows Official/Production: 10 1, the setting you can reinstall Windows without having to back up any of the pictures videos music and documents that you have stored on Windows 10 Official/Production: Cumulative Update 14393.51 (Redstone 1, Inactive) it You absolutely should Windows 10 Official/Production: Cumulative Update 14393.51 (Redstone 1, Inactive) back up these things just in case Windows 10 Official/Production: Cumulative Update 14393.51 (Redstone 1, Inactive) but you shouldn t need to use that back up Keep My Files requires a certain amount of free space on your device As such it may be unavailable to you if your device is stuffed with a lot of files If you get an error message asking for more storage when you choose this option you ll need to back up your files and choose the remove everything option You could also delete any files that you aren t using on your device and try the option again This option will take longer than the other options Remove Everything Deletes every file every setting from your device and gives you a blank copy of Windows to work with You ll need to add any files you have backed up to your device again Here is the full change log for the patch Improved reliability for Internet Explorer Addressed issue to keep pen click settings after updating to Windows Version Addressed issue that may cause Windows Mobile devices to hang after turning Bluetooth on and off very quickly Security updates to Kernel Mode Drivers Microsoft Graphics Component Microsoft Edge Internet Explorer and Windows Authentication Methods

A:Windows 10 Official/Production: Cumulative Update 14393.51 (Redstone 1, Inactive)

This broke the camera on my Surface Pro 4. The latest ***. update 14393.67 still hasn't fixed it. Camera just displays black screen. Not good...
Edit - can't believe it censored c u m as in cumulative. Ridiculous!

http://forums.windowscentral.com/windows-10/435133-windows-10-official-production-cumulative-update-14393-51-redstone-1-inactive.html
Relevancy 56.33%

Windows gets its first post-Anniversary Update cumulative patch with build Windows Central Issues Bugs Solutions For all things Build of Windows Discuss it all here Basic tip If you're having any Official/Production: (Redstone Update Windows 1, 14393.51 10 Cumulative non-Insider) issues with your device try a reset Settings gt Update amp security gt Recovery gt Reset this PC gt This provides you with two options keep my files and remove everything Keep my files Does just as its name describes If you choose the setting you can reinstall Windows without having to back up any of the pictures videos music and documents that you have stored on it You absolutely should back up these things just in case but Windows 10 Official/Production: Cumulative Update 14393.51 (Redstone 1, non-Insider) you shouldn t need to use that back up Keep My Files requires a certain amount of free space on your device As such it may be unavailable to you if your device is stuffed with a lot of files If you get an error message asking for more storage when you choose this option you ll need to back up your files and choose the remove everything option You could also delete any files that you aren t using on your device and try the option again This option will take longer than the other options Remove Everything Deletes every file every setting from your device and gives you a blank copy of Windows to work with You ll need to add any files you have backed up to your device again Here is the full change log for the patch Improved reliability for Internet Explorer Addressed issue to keep pen click settings after updating to Windows Version Addressed issue that may cause Windows Mobile devices to hang after turning Bluetooth on and off very quickly Security updates to Kernel Mode Drivers Microsoft Graphics Component Microsoft Edge Internet Explorer and Windows Authentication Methods

http://forums.windowscentral.com/windows-10/435133-windows-10-official-production-cumulative-update-14393-51-redstone-1-non-insider.html
Relevancy 56.33%

Microsoft pushes out batch of cumulative updates for Windows Windows Central Issues Bugs Solutions For all things Build of Windows Discuss it Official/Production: Update (Redstone non-Insider) 10 1, 14393.187 Windows Cumulative here Basic tip If you're having any issues with Windows 10 Official/Production: Cumulative Update 14393.187 (Redstone 1, non-Insider) your device try a reset Settings gt Update amp security gt Recovery gt Reset this PC gt This provides you Windows 10 Official/Production: Cumulative Update 14393.187 (Redstone 1, non-Insider) with two options keep my files and remove everything Keep my files Does just as its name describes If you choose the setting you can reinstall Windows without having to back up any of the pictures videos music and documents that you have stored on it You absolutely should back up these things just in case but you shouldn t need to use that back up Keep My Files requires a certain amount of free space on your device As such it may be unavailable to you if your device is stuffed with a lot of files If you get an error message asking for more storage when you choose this option you ll need to back up your files and choose the remove everything option You could also delete any files that you aren t using on your device and try the option again This option will take longer than the other options Remove Everything Deletes every file every setting from your device and gives you a blank copy of Windows to work with You ll need to add any files you have backed up to your device again Here's a Changelog Improved reliability of Windows Shell map apps Internet Explorer and Microsoft Edge Addressed issue causing push-button reset to not work correctly and roll back on devices with language set to any of the Unicode languages Addressed issue causing devices to crash after disconnecting an e-reader that was attached to the device Addressed issue causing devices to not recognize a Secure Digital SD card if it is inserted and removed multiple times Addressed issue causing some apps to not respond to the commands in the app bar in Windows Mobile Addressed issue that sometimes blocks alarm notifications in Windows Mobile Improved support for using the camera app in Windows Mobile Enterprise Addressed additional issues with rendering K resolution missing Start menu tiles when running on battery Internet Explorer Microsoft Edge Bluetooth compatibility graphics display rotation app compatibility Wi-Fi Feedback Hub Miracast Windows Shell revised daylight saving time and USB Security updates to Microsoft Edge Internet Explorer Microsoft Graphics Component Windows kernel and Adobe Flash Player

http://forums.windowscentral.com/windows-10/439308-windows-10-official-production-cumulative-update-14393-187-redstone-1-non-insider.html
Relevancy 56.33%

Microsoft rolls out cumulative updates to Windows PCs Windows Central Issues Bugs Solutions For all things Build of Windows Discuss it all here Basic tip If you're having any issues with your device try a reset Settings gt Update amp security gt Recovery gt Reset this PC gt This provides you with two options keep my files and remove everything Keep my files Does just as its name describes If you choose the setting you can reinstall Windows without having to back up any of the 1, Inactive) Cumulative Update Official/Production: 10 Windows 14393.82 (Redstone pictures videos music and documents that you have stored on it You absolutely should back up these things just in case but you shouldn t need to use that back up Keep My Files requires a certain amount of free space on your device As such it may be unavailable to you if your device is stuffed with a lot of files If you get an error message asking for more storage when you choose this option you ll need to back up your files and choose the remove everything option You could also delete any files that you aren t using on your device and try the option again This option will take longer Windows 10 Official/Production: Cumulative Update 14393.82 (Redstone 1, Inactive) than the other options Remove Everything Deletes every file every setting from your device and gives you Windows 10 Official/Production: Cumulative Update 14393.82 (Redstone 1, Inactive) a blank copy of Windows to work with You ll need to add any files you have backed up to your device again Microsoft is rolling out two updates to Windows on the PC for non-Insider users while also rolling out one for Insiders in the Release Preview ring One of the two updates is the same cumulative download that was rolled out last week to Insider members in the Release Preview update ring which fixed a number of bugs following the release of the Windows Anniversary Update The other new update for both Release Preview and production versions of Windows has the support number KB and according to Microsoft's change log quot this update makes stability improvements for the Windows Version servicing stack quot There's no word yet on when the update will be released for all non-Insider Windows Mobile users as well

A:Windows 10 Official/Production: Cumulative Update 14393.82 (Redstone 1, Inactive)

After the 23 of August update bookmarks don't show up in the Edge bookmarks toolbar. I import them from IE or chrome and after that they still don't show up. They're in the correct folder, though, I checked.
Is anyone else experiencing this?

http://forums.windowscentral.com/windows-10/436827-windows-10-official-production-cumulative-update-14393-82-redstone-1-inactive.html
Relevancy 56.33%

Windows PC cumulative build rolls out to all users Windows Central Issues Bugs Solutions For all things Build of Windows Discuss it here Basic tip If you're having any issues with your device try a reset Settings gt Update amp security gt Recovery gt Reset this PC gt This provides you with two options keep my files and remove everything Keep my files Does just as its name describes If you choose the setting you can reinstall 1, 14393.105 Cumulative 10 Windows (Redstone Update Official/Production: non-Insider) Windows without having to back up any of the pictures videos music and documents that you have stored on it You absolutely should back up these things just in case but you shouldn t Windows 10 Official/Production: Cumulative Update 14393.105 (Redstone 1, non-Insider) need to use that back up Keep My Files requires a certain amount of free space on your device As such it Windows 10 Official/Production: Cumulative Update 14393.105 (Redstone 1, non-Insider) may be unavailable to you if your device is stuffed with a lot of files If you get an error message asking for more storage when you choose this option you ll need to back up your files and choose the remove everything option You could also delete any files that you aren t using on your device and try the option again This option will take longer than the other options Remove Everything Deletes every file every setting from your device and gives you a blank copy of Windows to work with You ll need to add any files you have backed up to your device again Here's a Changelog Improved reliability of the Windows Ink Workspace Microsoft Edge File Server Windows kernel Microsoft Component Object Model COM Cluster Health Service Hyper-V Multi-Factor Authentication MFA NTFS file system - PowerShell Internet Explorer facial recognition graphics Microsoft Store and Windows Shell Improved performance for the speed of purchasing Store apps Improved battery life of wearable devices such as the Microsoft Band while Bluetooth is connected and idle Improved compatibility of using Xbox One controllers with various games Addressed issue with incorrect character mapping between Japanese and Unicode for the question mark symbol Addressed issue that prevents the download and initialization of NET objects in Internet Explorer Improved support for new near-field communication NFC chips for Windows Mobile Addressed issue with game or app audio not resuming after ending a call on Windows Mobile Addressed additional issues with compatibility Remote Desktop BitLocker PowerShell Direct D networking policies Dynamic Access Control DAC rules Microsoft Edge Connected Standby mobile device management MDM printing Fingerprint logon and Cortana

http://forums.windowscentral.com/windows-10/437893-windows-10-official-production-cumulative-update-14393-105-redstone-1-non-insider.html
Relevancy 52.89%

I seem to be stuck on Windows Insider build 14342 (Version 1511 OS Build 14342.1002). Since this build was installed, I haven't gotten any other insider builds.
Any ideas on how to fix this? I want to avoid having to reinstall if possible.
Is there a way to manually install build 14352, the one that followed the one I'm stuck on?

A:Stuck on Insider build 14342 (Version 1511 OS Build 14342.1002)

Originally Posted by GoghUA I seem to be stuck on Windows Insider build 14342 (Version 1511 OS Build 14342.1002). Since this build was installed, I haven't gotten any other insider builds.
Any ideas on how to fix this? I want to avoid having to reinstall if possible.
Is there a way to manually install build 14352, the one that followed the one I'm stuck on? you can use the ISO files to get the newer version Windows 10 PC Insider preview build 14366 ISO files now available for download | Windows Central

http://forums.windowscentral.com/windows-10/430128-stuck-insider-build-14342-version-1511-os-build-14342-1002-a.html
Relevancy 52.03%

My win pro build hasn't received the November update build while my other win home versions have I know I'm not the only one having this problem but here's my two cents On my xw I upgraded from win pro to win pro as soon as was available some months ago I still receive other windows updates I downloaded 1511 the 10240 November pro build build received 10 win update hasn't the most recent iso from the media creation tool but I don't have an option to mount it from the right click menu Both sfc and dism have no issues I would burn it do a disk but I've read other users say its just reinstalled build instead I was using another random win pro computer at work today and noticed it hasn't received the November update yet either Anyone else with win pro that did get the update Maybe this issue has more to it like when I upgraded to pro I had an issue with onedrive I don't really use it so I only disabled it from win 10 pro build 10240 hasn't received the November update build 1511 startup in the task manager but it as a service disappeared except for registry entries and program files and win 10 pro build 10240 hasn't received the November update build 1511 I haven't found a way to reinstall it yet I know I could do a clean install of windows but that's not my style I move from pc to pc over the years using disk images win 10 pro build 10240 hasn't received the November update build 1511 This onedrive issue is the only problem I've come across that I haven't figured out without a clean install I mean I wiped onedrive from my system completely registry keys and all but attempts to reinstall fall short error corrupted file During the attempted installation it places all its registry items and files including the file it says is corrupt Copy those files that are working on another computer no dice sfc and dism no issues I'm getting off track I was hoping the November update would fix it but now that's an issue too Maybe Microsoft delayed the November update on win pro Thanks in advance

A:win 10 pro build 10240 hasn't received the November update build 1511

RE : I downloaded the most recent iso from the media creation tool but I don't have an option to mount it from the right click menu.

Did you burn the iso to a bootable media, then insert the media to the computer ?
If that was what you did, then you would NOT see the Mount option.
Instead, you would see the Setup option. Use that to start the installation.

http://www.tenforums.com/windows-updates-activation/36509-win-10-pro-build-10240-hasnt-received-november-update-build-1511-a.html
Relevancy 52.03%

Hi everyone After not recieving the AU from Microsoft I took a look at winver I noticed that my PC has never received or installed an update since the original Windows build Version or build I began to investigated and noticed that Cumulative Update KB keeps trying 10 (build 10240) update to original Windows build from Unable to install however Windows Update always fails to install this update giving me this error quot There were problems installing some updates but we'll try again later If you keep seeing this and Unable to update from Windows 10 original build (build 10240) want to search the web or contact support for information this may help quot No error code is provided I took a look at setuperr log within the Windows BT folder and this is the only error present Error SP CSetupPlatform ResurrectNewSystem Cannot resurrect new system Win Exception C Windows BT Sources NewSystem dat The system cannot find the file specified x thiscall UnBCL FileStream FileStream const class UnBCL String enum UnBCL FileMode enum UnBCL FileAccess enum UnBCL FileShare unsigned long gle x I would really appreciate if anyone could help me out with this issue as i'd like to move up to the AU - Please let me know if you need any more info Thanks

http://www.tenforums.com/windows-updates-activation/63725-unable-update-windows-10-original-build-build-10240-a.html
Relevancy 49.02%

I was wondering if someone can walk me through the wiring A tad confusing for me I mean it s not like those - pins things which are impossible to mess up Its those wires that can fit either way I m a bit lost First this is the build What s been done so far Hardware wise everything is in the case Applying the thermal was easy The psu is plug in right video card is set the power supply for the processor is set it s everything else I m trying to go with a dual drive first one being a hdvd and the other a reg dvdrw I have several of the ribbon cables now sure how to connect them I mean it tells you how for one but for two drives The fans I m not sure how to connect same with the HDD What really annoying is the cables from the case they are purple black red not sure which way they go This is way the MSI manual has this is the mobo Now the stuck first Please on build. help. on wiring pc heatsink fan is kind of interesting Where do I plug it in to the motherboard It have three slots routed through a control knob stuck on wiring on first pc build. Please help. I m keeping it on max which part of the mobo should I put the heatsink plug in to thanks nbsp

A:stuck on wiring on first pc build. Please help.

Sounds like the optical drives are IDE, so the one on the end will be master, the one in the middle slave and the other end of the ribbon goes to the mobo.

The case lights/ switches should be labeled with things like HD+, HD- PW-, PW+

It takes a little translating, but HD+ would be the positive lead for the HD activity lights on the case so pins 1 and 3 in figure JFP1. Power switch are pins 6 and 8... just make sure to get the + and - right on each set.
 

https://forums.techguy.org/threads/stuck-on-wiring-on-first-pc-build-please-help.929823/
Relevancy 49.02%

I have not been able to get any updated insider builds since 10565.

Keep checking Check For Update but it says "your device is up to date"

Any suggestions?

A:Stuck at 10565 build

Manually update to 10586 by downloading iso from ms, double clicking on it and running setup.exe. Then make sure you rejoin the Insider Program in update menus, and leave pc on for up to 48 hours

Note - do not clean install if you did not install windows 10 upgrading from a valid 7/8 licence, as it will not activate.

http://www.tenforums.com/windows-insider/38651-stuck-10565-build.html
Relevancy 49.02%

Hello all Stuck build new with problem I Stuck with new build problem am trying to build my st system and seem to have gotten in Stuck with new build problem over my head Here is what I am putting together PCChips P G v Via Socket MicroATX Motherboard Audio AGP x Ethernet LAN USB Serial ATA RAID CNR Intel Celeron D GHz K Cache MHz FSB OEM Socket Processor Masscool W B M G Socket Intel Prescott Aluminum CPU Cooling Fan PNY Verto GeForce FX MB DDR PCI Dual VGA TV Out Video Card Seagate GB MB ATA- Retail Hard Drive Ultra MB PC DDR MHz CL Memory NEC Super-Multi AD- A x DVD R Burn x DVD R Read x DVD RW x DVD-R DL x DVD-RAM x x CD-R RW Black DVD Burner - OEM I had a case and power supply already from a system I had built earlier Anyway I assembled everything and tried to start the system to install Windows XP and couldn t get any power at all After reading through the forums I found that the MoBo was grounding to the case and of the connectors had to have a wire moved because this board only had pins So now I get power to the system but I can t get the system to turn on my monitor or to boot up from the floppy drive or the DVD drive Not sure where to go from here Any help is greatly appreciated Thanks in advance nbsp

Relevancy 48.59%

Hi All
I'm Tired Of Still Formatting My PC When Evered Anew Build Is Released
Can I Update Win 7 From Build To Build Without Formatting ?

Thanks

A:Can I Update Win 7 From Build To Build Without Format

Quick Answer: Yes

You could upgrade from a build to another build but it is recommended to do a clean install.

http://www.sevenforums.com/general-discussion/15285-can-i-update-win-7-build-build-without-format.html
Relevancy 48.59%

Hey everyone, just got a new computer, downloaded the Netflix app but for some reason it's stuck on the old interface and not the new Windows 10 interface, I can't figure out why?
Anyone else having this issue or know how to fix it?

A:Netflix stuck on Windows 8 build?

Originally Posted by Windows Central Question Hey everyone, just got a new computer, downloaded the Netflix app but for some reason it's stuck on the old interface and not the new Windows 10 interface, I can't figure out why?
Anyone else having this issue or know how to fix it? you're on windows 10, right?
Use the store app to get the netflix app
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

http://forums.windowscentral.com/windows-8/431229-netflix-stuck-windows-8-build.html
Relevancy 48.59%

Title says it all, have not had issues with any previous builds; anyone else run into this or have a fix?

A:Build 10162 download stuck at 0%

Restart the WU service...

http://www.tenforums.com/installation-setup/7760-build-10162-download-stuck-0-a.html
Relevancy 48.59%

I have tried just about every method out there!
I have been getting the automatic downloads and restarts since I purchased the computer and never once did I question it.
Then I hear about this "anniversary update" and all the new features and I think "well I want that, lemme get it."
Turns out I'M STILL ON THE SAME VERSION THAT I WAS WHEN I PURCHASED THE FREAKIN THING! Also, when I check update history, THE DAMNED THING HASN'T UPDATED A SINGLE TIME!

A:Why am i stuck on windows build 10240???

Originally Posted by Windows Central Question I have tried just about every method out there!
I have been getting the automatic downloads and restarts since I purchased the computer and never once did I question it.
Then I hear about this "anniversary update" and all the new features and I think "well I want that, lemme get it."
Turns out I'M STILL ON THE SAME VERSION THAT I WAS WHEN I PURCHASED THE FREAKIN THING! Also, when I check update history, THE DAMNED THING HASN'T UPDATED A SINGLE TIME! i dont know whats wrong with your system , but i can show you a way to get Anniversary update . Download Media creation tool, make a bootable disc and when you boot from disc it will give to 2 options > upgrade your computer & >fresh install. choose whichever you prefer .
OR you can use the update utility form the microsoft website to force update your system to AU
Media creation tool will get you the latest AU update build i.e. 14393.10 :)

http://forums.windowscentral.com/ask-question/434685-why-am-i-stuck-windows-build-10240-a.html
Relevancy 48.16%

Hi all I've been using seven bit version for quite a while now 7077 Build login stuck @ screen! on my laptop MSI GX PX - amd turion x ati hd MB GB gigs of ram The first installation did the problem mentioned in the title of the topic after i installed Kerio personal firewall - i didn't know what to do so i just reinstalled windows But now it happened again The comp was running for days i turned it off around am then turned it on at am - for the first time i could login and i even see the taskbar and the background but the icons never showed i couldn't click anything on the taskbar either ctrl alt del did nothing so i had to restart it manually The login screen showed up i entered my password but it never made it to the desktop it just got stuck like that the HDD wasn't spinning or anything Build 7077 stuck @ login screen! - restart - in safe mode it boots up normally so i uninstalled a few recently installed Build 7077 stuck @ login screen! programs mkvtoolnix and alike but after restarting it got stuck at Build 7077 stuck @ login screen! the login screen again Now normally i would just reinstall windows but after two months it has too many programs - lot of time to install them again So i thought i'll ask here for help The notebook has XP as it's main OS seven is installed on a virtual harddrive gigs Thank's for any kind of help in advance

A:Build 7077 stuck @ login screen!

Hi there
I can't give you a reason as to the error but this might work.

Try starting Windows in SAFE MODE as you've done but disable Networking and then shutting down. This should clear out any "Stuck" services. Switch off Firewall and uninstall any AV software whilst in SAFE MODE.

Incidentally while you are logged on in save mode see what starts automatically and stop those you don't need -- there are posts around suggesting what you can stop running automatically.

When you try again in "Normal mode" start DISCONNECTED from any network and switch your wireless card off.

Cheers
jimbo

http://www.sevenforums.com/general-discussion/7559-build-7077-stuck-login-screen.html
Relevancy 48.16%

Although its small and trivial, it bothers me a lot and it ruins the mood any wall paper puts out for me. How do i remove it?
http://i.imgur.com/d6d2kXA.png?1
(its at the bottom right)

A:Windows 8.1 Build XXXX stuck on desktop

That happens when your OS is not activated. You can confirm this by pressing Windows key+S and typing "PC Info". Select it. At the bottom of the information it will tell you something like "Windows is not Activated" or "Windows is Activated"

if it's not activated Microsoft wants you to provide the key to activate your OS.

http://www.eightforums.com/general-support/58560-windows-8-1-build-xxxx-stuck-desktop.html
Relevancy 48.16%

I'm a Insider member since Oct get all the builds till the official launch of Windows last July A few days before the official launch my Windows TP build had a boot problem and gave me a UEFI boot error since the Insider Program was locked and I can't get any Insider Preview build to work I had format my PC and install my Don't stuck 10240 Insider get Builds, build on Windows Pro and follow the upgrade path to Windows Reserve a copy wait for the update and install the Windows Pro and activate with my valid Windows Key no hassles there After success upgrade I went Don't get Insider Builds, stuck on build 10240 to Security and Updates gt Windows Update gt Advanced Options and hit the Get Insider builds gt Get Started button restart my PC and check if Don't get Insider Builds, stuck on build 10240 Fast Ring was selected and it was Last month it came out Build and later on Build and I didn't receive any of those I tried to force the download by hitting constantly the Check update button on Windows Update but the only thing my Windows Update download is Windows Defender definitions So I tried the following in Advanced Option I hit the Stop receive preview builds restart PC and go there again I hit the button Get Preview Builds restart again and wait a few days no luck Since I don't had any luck there I post some questions in Microsoft Answers and report the problem a few days later receive some answers but none of the those answers worked out and one of them seems to me a bit stupid so the suggestions was - Uninstall any anti-virus don't have any so it really doesn't apply to me - Safe Boot with Network did that produce no effect what so ever - Selective Startup with all services stopped except Microsoft services same as above produced no effect still didn't get any update via Windows Update - Create a new Administrator account and run the Windows Update from the new account although might work I found this solution a bit awkward I mean I have to create a new account with Administrator privileges and then subscribe to Insider Preview Program with that account and then make all the process I did it no effects also bit I thought that was the dumbest solution ever - Drivers update - All my drivers are up to date some from the manufactures others from Microsoft no hardware problems so can't anything about that - Reset IP Address - Did that nothing happened - Windows Update as Trusted Sites - Did that nothing happened - Change DNS to and - Did that nothing happened So in total despair I contact Microsoft Answer Desk by Phone and after a few minutes trying to explain what is my problem I'm a portuguese from Portugal and ours Answer Desk is provided by Brazilians which don't quietly understand us - Brazilian Portuguese is quite different from European Portuguese the woman gave me this solution Re-install my Windows Pro and from there wait that Windows Update give me the Insider Preview update and if Windows Update tries to install regular Windows upgrade she said to stop the upgrade and differ that update and wait for the Insider Update I didn't make this yet because I'm hard to believe that will work I mean in Windows I will get the Windows Insider Preview as an update Last I checked I had to install Windows TP with an ISO and boot from that ISO to get started and the new Insider Preview program state that I only have to set Windows Update to Get the Preview Builds which I did from a Windows activated install which I have By the way my Windows is set to USA as location and has the display language set to US English I had also set a Portuguese keyboard setup set my region to Portugal and Proofing tools are setup to US English and Portuguese Portugal I'm stating this since if my display language is not supported by Insider Preview I don't receive any builds Portuguese currently not supported So please help me understand why I'm not getting the Insider builds and I'm still stuck in build Here is a screenshot of my Settings and my Insider Hu... Read more

A:Don't get Insider Builds, stuck on build 10240

Welcome to Ten Forums Ed
When I changed from slow to fast it took 4 days to update for me. Have you waited the four days?

http://www.tenforums.com/windows-insider/22803-dont-get-insider-builds-stuck-build-10240-a.html
Relevancy 48.16%

I downloaded the build 14965. When it download was finoshed then it says that error(in installation) but the downloaded file remains in my mobile in the Temporary File option. What can I do?

http://forums.windowscentral.com/ask-question/445635-build-installation-stuck-downloading-start.html
Relevancy 47.73%

I have windows 8.1 and I started my windows uodate yesterday at 9 pm. It took almost 45 mins fir the uodates to download then I clicked in installing the updates. Since 9:45 pm last night the installation is stuck on 25 out 67 updates and the update that has been installing is the windows malicious software tool. Its almost 12 hrs now. I even tried stopping the installation and restarting the ststem. But before restarting the installation process has started again. Please help to reaolve the issue

http://forums.windowscentral.com/ask-question/443333-why-window-update-stuck-windows-malicious-software-tool-update.html
Relevancy 47.3%

Hey, guys and gals!

I've been stuck with the bugs of this build for some time and it was annoying at first, but still bearable. Now I've been getting the expiration warning and that's a big problem for me. I don't know if there's a newer build for the slow ring or not, and my system can't find any newer build to update to. I can't change to the fast ring because that's one of the bugs of this build.... I don't want to wake up on the 1'st of October not being able use my PC.

Any idea on how I can solve this or any info on the new build for the slow ring?

http://www.tenforums.com/windows-updates-activation/64756-stuck-build-14905-slow-ring-expiration-soon.html
Relevancy 47.3%

Hi All,

I seem to be stuck on fast ring build 14352. Have checked a few things in the Registry and retried several times, but as yet, have seen nothing.

Any ideas?

The latest Insider Preview ISO that you can download seems to the build 14342 (via https://www.microsoft.com/en-us/software-download/windowsinsiderpreviewadvanced), and I don't really want to download the ESD from a russian site, but can't seem to find the correct MS site.

http://www.tenforums.com/windows-insider/54091-stuck-14352-no-offer-new-iast-ring-build.html
Relevancy 47.3%

So I'm having some problems with Windows Update this is my parent's computer and I do scan regularly with Avast and Malwarebytes- no threats I go to update Windows Updates and it just stays on the loading screen with progress however from time to stuck at Windows screen, Update update Java can't loading time I notice when I go to shut Windows Update stuck at loading screen, can't update Java down the computer I get one of those icons on my shut down button Windows Update stuck at loading screen, can't update Java that you sometimes get from updates so I don't know what's going on I get that icon and at shut down it says updates of are installing do not turn off your computer but then after reboot when I go back to Windows Updates it's now less so I had updates now I have but I still never saw the progress bar nothing there was no indication that updates were being installed it was always at I waited over hours- almost all day I'm just confused and now it's saying I have updates and again it's just stuck at the loading screen no progress can anyone help me out with this My dad said he also noticed the computer running a bit slow even boot up is slow Also Java I cannot get it to install I get the pop up window in my taskbar to install updates but when I click it nothing happens this I have problems with even on my personal laptop I can't ever seem to install Java updates because it won't open what is going on with this program Any help would be greatly appreciated Thank you I just wanted to add that I'v also been experiencing some loading problems with webpages I keep getting an error page and some pages I can't load for a while it took me a very long time to be able to post here and took me a while to load google even sometimes they load ok but other times unable to load for some reason took a screenshot to show you maybe that has something to do with updates not being able to load and install

A:Windows Update stuck at loading screen, can't update Java

Computer freezes a lot and loads slowly as well.

http://www.techsupportforum.com/forums/f217/windows-update-stuck-at-loading-screen-cant-update-java-1126201.html
Relevancy 46.87%

Tried win 10 anniv update and after 10 hours! it sat on 99%. Finally shut it down. Now when I try to update from setting-update, that locks up & I have to use task manager to exit it. Heard a lot about problems with the anniv update, now I know. Also what do they mean when updating with the ISO? I know little-if anything about programming.

http://www.tenforums.com/windows-updates-activation/61162-win-10-anniv-update-stuck-system-update-locks.html
Relevancy 46.87%

Windows update is stuck at 0%. I reset it to factory settings because I bought from some store that sold used computers. here are the things that I did. 1. I turn metered connections off as I read some problems came up with that still didn't work. 2. I did various things that did not do anything in command prompt like sfc/scannow but it said I had no problems. I tried troubleshooting windows update it shut off bits and other stuff but got stuck while restarting bits. now it is freezing when I try to activate anything in the control panel please help or should I just reset my computer.

A:Windows update stuck at 0% after trying to update it after i reset it to factory

I've found that the first set of Windows 8 updates takes forever to get past 0% Downloading. Just let it go for a couple hours.
 
Someone on Reddit described it as:

New installations of Windows 8 update certain system files in the background. The foreground "update" app can't get a lock on the update repository, so it just hangs until the background updating is done. It usually takes a couple of hours. Just wait it out.

http://www.bleepingcomputer.com/forums/t/532494/windows-update-stuck-at-0-after-trying-to-update-it-after-i-reset-it-to-factory/
Relevancy 46.87%

I am trying to get my PC to upgrade to insider build 14332. At the moment I am on build 14316.

I have sometimes seen build 14332 available in Settings/Update, but after trying to get this, the PC is now stuck with 'Preparing to install updates 100%' There is no $windows directory, though this may of got deleted when I cleaned up system files. There is about 6GB of free space on the SSD partition.

What can I do to get the upgrade to run?

A:Build 14332 upgrade stuck 'Preparing to install updates 100%'

I believe you are going to need more room.

Kill the current update attempt, reboot and try it again only skip the Updates part. See if that works.

Filling out your System Specs would be a help.

See here: System Specs - Fill in at Ten Forums

Also, how big is the SSD?

http://www.tenforums.com/windows-updates-activation/49191-build-14332-upgrade-stuck-preparing-install-updates-100-a.html
Relevancy 46.87%

I am trying to get my PC to upgrade to insider build 14332. At the moment I am on build 14316.

I have sometimes seen build 14332 available in Settings/Update, but after trying to get this, the PC is now stuck with 'Preparing to install updates 100%' There is no $windows directory, though this may of got deleted when I cleaned up system files. There is about 6GB of free space on the SSD partition.

What can I do to get the upgrade to run?

http://www.tenforums.com/installation-setup/49191-build-14332-upgrade-stuck-preparing-install-updates-100-a.html
Relevancy 46.44%

I'll cut right to the chase; I built my new computer and I'm installing Windows 7 for the first time. Its stuck on "Preparing your computer for first use".

Methods I've tried:
Startup Repair via Disk
Unplugging my disk driver
Resetting BIOS

Specs:
GTX 960
1TB WD HDD
Gigabyte H170M-D3H
16 GB Ram DDR4 Hyperx Fury

This is very frustrating and I really wanna get this up before Spring Break ends ;~;
Thanks in advance!

(P.S - I'm a new scrubbo to these kind of stuffs so sorry for any inconvenience :-( )

http://www.sevenforums.com/installation-setup/393770-new-custom-build-windows-7-stuck-setup-preparing-you-computer.html
Relevancy 46.01%

Hello I was not installing changing or doing any maintenance of any kind on my PC The only recent change was that Firefox updated to a new version There was a notice that updates were so win 12, stuck far. 2 6 update installing hours is of update still ready and I was turning my PC off anyway - went quickly but I saw it stick on That was two hours ago I am unwilling to proceed without advice I have also been struggling with a similair issue with a relatives PC with almost no luck These machines are in the same house and run win but are not shared or networked win update is still stuck installing update 6 of 12, 2 hours so far. and have seperate ISPs Is windows just having a bad week Some kind of attack I have no idea The relative's PC is older and wasn't performing well even before it got stuck in update In fact I ran update on that one in hopes of solving those issues I believe there are several issues in play there At the moment I'm more concerned with how to safely interrupt update on my PC and fix the cause It has been running flawlessly until now Thanks

A:win update is still stuck installing update 6 of 12, 2 hours so far.

What common software is installed? Anti-virus? Registry Destroyers Cleaners?
what users are common to both machines?
What are the KB numbers of the affected updates?


Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

If the file is too large (8MBcompressed), remove the older CBSPersist cab files until the final file isbelow the limit - you can always post them separately after zipping them. (theforum doesn't allow the upload of bare CAB files, for a number of reasons)

http://www.sevenforums.com/windows-updates-activation/352164-win-update-still-stuck-installing-update-6-12-2-hours-so-far.html
Relevancy 46.01%

Hi I can't install any of the update as it is checking forever i did a fresh install of windows Thanks Diagnostic Report ----------------------------------------- Windows Validation Data-- gt Validation Code Cached Online Validation Code N A hr xc f Windows Product Key Hash hTNIwJxpoGVBaL Jbg CBGbQw Windows Product ID Type Windows for update 7 update. Windows stuck checking at License Type Retail Windows OS version ID Windows 7 update stuck at checking for update. AC C -DB - CB- C -E D E Is Windows 7 update stuck at checking for update. Admin Yes TestCab x LegitcheckControl ActiveX N A hr x Signed By N A hr x Product Name Windows Ultimate Architecture x Build lab win sp gdr - TTS Error Validation Diagnostic Resolution Status N A Vista WgaER Data-- gt ThreatID s N A hr x Version N A hr x Windows XP Notifications Data-- gt Cached Result N A hr x File Exists No Version N A hr x WgaTray exe Signed By N A hr x WgaLogon dll Signed By N A hr x OGA Notifications Data-- gt Cached Result N A hr x Version N A hr x OGAExec exe Signed By N A hr x OGAAddin dll Signed By N A hr x OGA Data-- gt Office Status N A OGA Version N A x Signed By Windows 7 update stuck at checking for update. N A hr x Office Diagnostics D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - D FF - - Browser Data-- gt Proxy settings N A User Agent Mozilla compatible MSIE Win Default Browser C Program Files x Google Chrome Application chrome exe Download signed ActiveX controls Prompt Download unsigned ActiveX controls Disabled Run ActiveX controls and plug-ins Allowed Initialize and script ActiveX controls not marked as safe Disabled Allow scripting of Internet Explorer Webbrowser control Disabled Active scripting Allowed Script ActiveX controls marked as safe for scripting Allowed File Scan Data-- gt File Mismatch C Windows system wat watadminsvc exe Hr x File Mismatch C Windows system wat npwatweb dll Hr x File Mismatch C Windows system wat watux exe Hr x File Mismatch C Windows system wat watweb dll Hr x Other data-- gt Office Details lt GenuineResults gt lt MachineData gt lt UGUID gt AC C -DB - CB- C -E D E lt UGUID gt lt Version gt lt Version gt lt OS gt lt OS gt lt Architecture gt x lt Architecture gt lt PKey gt - - - - VQ R lt PKey gt lt PID gt - - - lt PID gt lt PIDType gt lt PIDType gt lt SID gt S- - - - - - lt SID gt lt SYSTEM gt lt Manufacturer gt Hewlett-Packard lt Manufacturer gt lt Model gt HP Pavilion dv Notebook PC lt Model gt lt SYSTEM gt lt BIOS gt lt Manufacturer gt Hewlett-Packard lt Manufacturer gt lt Version gt F C lt Version gt lt SMBIOSVersion major quot quot minor quot quot gt lt Date gt lt Date gt lt BIOS gt lt HWID gt E FF D FC lt HWID gt lt UserLCID gt lt UserLCID gt lt SystemLCID gt lt SystemLCID gt lt TimeZone gt GMT Standard Time GMT lt TimeZone gt lt iJoin gt lt iJoin gt lt SBID gt lt stat gt lt stat gt lt msppid gt lt msppid gt lt name gt lt name gt lt model gt lt model gt lt SBID gt lt OEM gt lt OEMID gt HPQOEM lt OEMID gt lt OEMTableID gt SLIC-MPC lt OEMTableID gt lt OEM gt lt GANotification gt lt MachineData gt lt Software gt lt Office gt lt Result gt lt Result gt lt Products gt lt Applications gt lt Office gt lt Software gt lt GenuineResults gt Spsys log Content x Licensing Data-- gt Software licensing service version Name Windows R Ultimate edition Description Windows Operating System - Windows R RETAIL channel Activation ID ac e a - cc - -a ff- ce fb b Application ID c -d - d - e-d ec f f Extended PID - - - - - - - Installation ID Processor Certificate URL SpcService Web Service Machine Certificate URL RacService Web Service Use License URL UseLicenseService Web Service Product Key Certificate URL PkcService Web Service Partial Product Key VQ R License Status Licensed Remaining Windows rearm count Trusted time AM Windows Activation Technologies-- gt HrOffline x HrOnline N A HealthStatus x Event Time Stamp N A ActiveX Not Registered - x Admin Service Not Registered - x HealthStatus Bitmask Output HWID Data-- gt HWID Hash ... Read more

A:Windows 7 update stuck at checking for update.

Lookin at that report,
There are at least 2 lines of data that i need.
Rerun the report please otherwise cant help you.
That comp did not come with that OS, please confirm if you have a dreamspark licence.

Roy

http://www.sevenforums.com/windows-updates-activation/396588-windows-7-update-stuck-checking-update.html
Relevancy 46.01%

The update in question is .netframework 3.5 I have tried the windows update fix it program and that didnt work. I have tried renaming the sofware folder in windows folder to old. but that does nothing.

I dont know what else to do.

I do not getting any error codes.

Attachment 251123

A:Windows 7 update stuck at preparing update.

Please follow the Windows Update Posting Instructions and post the requested data

http://www.sevenforums.com/windows-updates-activation/274800-windows-7-update-stuck-preparing-update.html
Relevancy 45.15%

A buddy of mine is looking to build a new computer and turned to me for advice I got some help here last year on my build and I never did post a follow up so here s what I ended up with CPU Intel Core Duo E Wolfdale GHz overclocked to Build Update New Help Build and GHz Motherboard Gigabyte GA-EP -UD P LGA Intel P Video Card EVGA GeForce GTX GB overclocked HSF Xigmatek HDT-S mm Rifle CPU Cooler with Xigmatek Retention Bracket HDD Western Digital Caviar Black GB Build Update and New Build Help RPM CD DVD Burner Samsung X DVD -R DVD Burner RAM G Skill Build Update and New Build Help PI Black GB x GB DDR PSU Corsair CMPSU- TX W Thermal Compound Arctic Cooling MX- OS Windows Build Update and New Build Help Vista Ultimate -Bit Case NZXT Tempest ATX Mid Tower Monitor Acer X Wbd Black quot ms Widescreen LCD Speakers Logitech S- Multimedia Speaker System I m happy with the choice I made and never looked back The build went smooth and I m looking forward to doing another one in the future I keep myself up date on everything new that s out The only problem is that my friend is looking at cheaper products that I haven t looked into nor do I have the time Here is what he s looking for Budget No gaming He ll be using the computer for browsing the web hosting web sites and that s about it He does want a fast CPU though TB HDD He already has a monitor keyboard and mouse At least GB of RAM He would like to not have to upgrade for a few years He s majoring in a computer related field and he s a sophomore Any help would be greatly appreciated nbsp

A:Build Update and New Build Help

As you know you'll get some great help here so I'll suggest that he consider an AMD build. For what he wants to do and his budget he can get a very, very nice build especially since he won't be gaming.

Consider the AMD AM3 Propus 620 quad core 2.6 GHz for $99.00 at NewEgg with free shipping and for a few dollars more there is the 630 @ 2.8 Ghz. Both chips are getting great reviews.
 

http://www.techspot.com/community/topics/build-update-and-new-build-help.139032/
Relevancy 44.29%

My windows update does not like to load! It takes a very long time and sometimes causes explorer to crash! When I checked, I had 92 updates to install. When I click download and install, it would freeze and stay there for a long time. I tried to use the Fix it application, however that gets stuck on "Checking Online for Updates" as well! What should I do? I also tried to update in safe mode, but it wouldn't let me. Thanks in advance.

A:Windows Update won't update, stuck at 0%

Hello NoisE and welcome to Seven Forums.

With that many updates to install, I would disable automatic updates and manually install just a few at a time. I personally don't do more than 5 at a time but you could try 10. Keep track of the KB numbers for each update in each group. After installing the first group, restart the computer and make sure everything is working. If it is, install the next group and restart. Continue doing this until all updates are installed.

If a particular group fails to install correctly, uninstall those particular updates by looking for their KB numbers. Then try to install just one at a time and reboot after each one. They'll either all install OK or you'll know which update is causing the problems. Leave it for last and install the next group.

Yes, this is a much slower process but it usually results in a much better update experience.

Windows Update Settings - Change

Windows Update - Uninstall an Update

http://www.sevenforums.com/windows-updates-activation/260639-windows-update-wont-update-stuck-0-a.html
Relevancy 42.57%

Latest reference file : 1R201 16.07.2003
Please Note Build 181 is now available! This download is for use with build 181 and higher only. Support is no longer available for previous builds and reference files.

http://www.lavasoftusa.com/support/download/
 

Relevancy 42.57%

Changelog 14.0.7.342 (Update 7.1)

Fixed a bug where the IPM (In Product Messenger) slider could not be closed / minimized
https://betacenter.avira.com
 

https://malwaretips.com/threads/build-14-0-7-342-update-7-1-beta.35810/