Windows Support Forum

z240 sff USB driver missing

Q: z240 sff USB driver missing

Hello, I am working on installing windows 7 enterprise 64, on a z240 SFF. I am missing the USB drivers for it. I have the driver disk that came with it and I have installed every driver that is on there, along with going to HP support software and drivers web link and downloading everyone from there. There has not been one driver that has solved this problem, so I was looking for some sort of help on finidning one.l I tried a few other drivers for different model of towers but no luck. please help

Relevancy 100%
Preferred Solution: z240 sff USB driver missing

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: z240 sff USB driver missing

Hi: Please post the hardware ID for the USB controller that needs the driver. To find the hardware ID, go to the device manager and click on the device needing the driver. Then click on the Details tab at the top of the device window. Now you will see a Property drop down list, and it will be set to Device Description. Drop down on that list, and select the 2nd item (Hardware ID's). Post the top string of characters that you see in the window.
Relevancy 79.98%

When running an SCCM 2012 R2 task sequence to install Windows 10 on a Z240, the network driver is working in Windows PE during the download and apply Windows image. I'm using Auto Apply Drivers step and after it's completed, the computer restarts into the Windows 10 OS, tries to set up the devices and then the task sequence fails because there is no network driver detected that it can use. I've tried to import multiple types of network drivers from both HP and Intel with no success. I've tried to specifically apply the Z240 driver package instead of using Auto Apply Drivers with no success. I've also tried to install a Windows 8.1 image instead and it still fails at the same point. I'm confused because it works fine in PE, but not after restarting and booting into the Windows OS. Any help or suggestions would be appreciated.
Relevancy 62.78%

When I download graphics card driver 15.20.1045 (sp73511.exe) from the HP site and install this, the properties display 15.200.1045.So I'm now not sure if the corect driver is installed, because I'm still getting graphics card errors. Our software supplier PTC recommends the certified 15.20.1045-version so how do I get this right?
Relevancy 61.49%

This should be easy but I can't find the PCI Serial Port Driver for HP Z240 VEN_8086 DEV_A13D. I think that's the AMT driver  for this puppy.... I think its called sunrisepoint or skylake chipset? Things that make you go hmmmmm  

A:PCI Serial Port Driver for HP Z240 VEN_8086 DEV_A13D

Hi: You need this driver...the AMT SOL driver is included. This package contains the latest Intel Management Engine Software for the supported Workstation models and operating systems, as well as utilities for updating and checking status.
Relevancy 45.58%

I have a brand new HP Z240. I have installed the SSD in the M2 slot on the board and updated the BIOS 1.27. The board or the BIOS will still not see the SSD. it is a Crucial 500GB SSD. Any help would be appreciated. Thanks.
Relevancy 45.58%
Q: Z240

Hi Team, We are trying to install win7 on Z240 but due to some issue the SSD does not gets detected we have also tried installing Win7 via CD/USB but still no luck can someone help me regarding this issue.


If secure boot is enabled in BIOS, try disabling it and enable legacy boot.Also in case you are using NVME SSD, then you may need to inject the corresponding driver
Relevancy 45.15%

Hello, i just bought an hp z240 workstation (tower format).I'm trying to configure a transcend m.2 30GB drive. After installing it on the dedicate m.2 slot on the motherboard i can't see it in the bios and even in windows 7.the first drive is connected on sata0 (original 1tb hdd with win 7 installed on it)On bios settings the m.2 slot is enabled. any suggestion? Thank you
Relevancy 45.15%

I need to upgrade from a Z220 to a Z240 using the same drives and o/s and software.  Will those drives run on the 240 without crashing?  If not, what drivers would I have to supply to use a program like Acronis Snap Deploy (set to restore to different hardware)?
Relevancy 45.15%

Dear Support Team,I want to procure HP Z240 workstation for  one of my project. The online datasheet shows that it comes up with only Windows 7 or Windows 10. But my system requirement is with Windows 8.1. Can HP Z240 haedware allows me to use it with Windows 8.1, if I purchase windows seperatley.RegardsWaqas Khalid
Relevancy 45.15%

Hi,I would like to know the MTBF of Z240 workstations.In one site I found MTBF as 2 million hours with SSD. Is it correct?
Relevancy 45.15%

Hello We are going to be purchasing a lot of HP Z Tower Workstations from our supplier in the future and I have been given one to QA in our environment nbsp We currently use HP BCU to make available and enable the TPM on our current HP systems We are using version of HPBCU Today Workstation HP TPM PPI Z240 I have downloaded version of the HPBCU to begin creating a configuration file for the new Z workstations nbsp The problem I have is that the TPM PPI physical presence settings are nowhere to be found in the UEFI BIOS firmware user interface What we want to do is suppress the prompt that would allow users to deny HP Z240 Workstation TPM PPI modifications This is was possible in previous incarnations of HPBCU on different models of workstation in the form of the following setting nbsp Embedded Security Activation Policy nbsp nbsp F to Boot nbsp nbsp Allow user to reject nbsp nbsp No prompts nbsp Unfortunately this is not in the file created using on the Z and as I said nothing appears in the user interface I have checked under Security gt TPM Embedded Security but the only options I see there are TPM Device and TPM State nbsp Is it possible to configure the physical presence settings on this model of workstation using HPBCU If not then I will need to reccommend an appropriate alternative make HP Z240 Workstation TPM PPI model where it is possible nbsp We deploy scripts that run HPBCU through configmgr SCCM and can't have this prompt annoying our users and potentially allowing them to deny the change nbsp We also can't have technicians HP Z240 Workstation TPM PPI visit every Z to configure this manually Our I T estate is fairly large at computers so automatic management is crucial to us nbsp Any help would be massively appreciated nbsp Many ThanksC Solved View Solution

A:HP Z240 Workstation TPM PPI

Updating the System BIOS/Firmware seemed to solve this issue
Relevancy 45.15%

Bios ver. N51 1.27 Does anyone know where the option is to turn on Num Lock for the HP Z240? I have looked throguh the service manual and there was no listing for turning on num lock like other models.Example: the  z210 Bios does offer this.  z240  Note: I am not interested in setting the forInitialKeyboardIndicators option in the Windows registy.    I'm looking for an option  similar to was is shown here.
Relevancy 45.15%

First problem:
For a couple of day my computer has been running a little hotter than usual, with the cpu being used at 25% when I am doing barely nothing. Lately now it also has been bluescreening me with the driver power state failure label
and some more but my picture cut the rest off.

I don't know what driver is the issue and what to do

Second problem:
I was looking through my drivers and trying to update them with device manger, but oddly whenever I try to update a driver my computer tries to update my bluetooth driver. When that happens the driver isn't found on my computer and gives me an error msg.

Thank you.

A:Driver power state failure & Bluetooth driver is missing

New update: I figured out how to update drivers separately, and I updated Realtek PCIE CardReader, synaptics ps/2 port touchpad, Mirosoft virtual WiFi miniport adapter #1 & 2, virtualbox host-only ethernet adapter,
Relevancy 44.72%

I have a z with a i - CPU on my desk that refuses to recognize the attached monitor properly nbsp In the Xorg log file there is no mention of EDID data nbsp The result is that the HD display connected is set to x rather than x nbsp I'm running Debian and have updated the system BIOS to the latest N EDID Linux and z240, Ver nbsp I've also built the latest driver available from Intel for linux nbsp nbsp nbsp nbsp nbsp nbsp z240, Linux and EDID nbsp nbsp LoadModule intel nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Loading usr lib xorg modules drivers intel drv so nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Module intel vendor X Org Foundation nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp compiled for module version nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Module class X Org Video Driver nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp ABI class X Org Video Driver version nbsp Using an old PCIe x video card I have let me connect all of the ports on the monitors HDMI DVI and VGA and Debian correctly set the resolution each time and Xorg log showed all of the expected EDID data nbsp A different z system here is working fine using the onboard video nbsp Since I need to have up to RAID adapters in the system at once I can't just add a different video card nbsp I have not tried Windows to see if it works there though I am going to try to do that on Friday nbsp Is there a video BIOS update that might fix this problem nbsp or is the hardware broken nbsp thanksedc

A:z240, Linux and EDID

I would guess you would have better driver support through windows vs linux for drivers.
Relevancy 44.72%

Hi, I'm wanting to install 2 x 3.5" HDDs in my new Z240 SFF Workstation. There is a bay that already came with an insert and one of the new drives slots into that just fine. However it looks like some sort of insert/caddy is needed for the "External/internal shared 3.5" bay", as it is too big for the drive itselt to slot in. It looks like this bay is sized for some sort of optical disk. I've called HP and their spare parts people here in Australia, but no one can find the part needed. Can some one please help?
Relevancy 44.72%

Hello, I have some problem to open a ticket in warranty for an HP Z240. I'm registered on HP Support and also HP Enterprise Support, but when I try to open a ticket after the serial number check the site platform give me an error: this is not the right site for this serial number. I get this error on HP Support and also HP Enterprise support. What is the procedure to open a warranty ticket for this workstation?????If I call the telephone support number is always is crazy  Thanks,Alessandro
Relevancy 44.72%
Relevancy 44.72%

HP sent a 16gb 2Rx4 PC$-2133P-Ra0-10 seperately with the new PC (HP Z240 SZh3). It came with 8gb RAM. I replaced the 8gb RAM with 16gb RAM but it wont boot. Blinking RED power light which turns to white blinking light. HELP!
Relevancy 44.72%

My system came with a Nvidia PCIe card. I would like to remove this card and use the integrated graphics. Whenever I remove the PCIe the system will just beep, and the integrated wouldn't work. I went in the bios but cannot find anything to enable the integrated. Thanks
Relevancy 44.72%

I am trying to setup my new HP Z240 workstation, but cannot get the graphics card to operate at any resolution above 1024 X 768. The graphics card is an NVIDIA QUADRO K620. It is connected to the monitor with a DVI-D Dual link cable. The monitor is an HP w2408. The monitor has two inputs (DVI and VGA). I have the VGA input connected to another HP computer with a NVIDIA GeForce GT 610 card (this computer/card/monitor displays at 1920 x1200). When I checked the adapter modes (using the list modes option), the best mode listed is 1024 x 768. The NVIDIA spec sheet lists the max resolution with DVI-I as 2560 x 1600 or 1920 x 1200. What can I do to get the max resolution from my monitor (1920 x 1200)?

View Solution.

A:Graphics resolution on Z240

Update.  Problem solved. When I realized that the monitor in DVI mode was not being recognized as PNP, it pointed to the monitor as the problem. Installed new monitor, everythng works as it should. Evidently the VGA input to the old monitor functioned properly while the DVI portion was defective (card or cable connection). Dave6666
Relevancy 44.72%

Have a new Z240 Workstation with a Samsung 950 Pro 256GB M.2 nVMe SSD.Windows 10 will install to the SSD from USB no problem but the machine fails to find the OS post install.The Samsung 950 Pro SSD does not show up in the UEFI section of the BIOS, but it does show up under Legacy devices.Secure Boot is not enabled. If I add a SATA HDD,  Windows Boot Manager gets installed on the SATA device and the machine will then boot Windows 10 from SSD. How do I get the machine to boot from SSD without having to have a SATA HDD installed? I've updated the BIOS from 01.11 to 01.21 with no change in the above.
Relevancy 44.72%

HP sent a 16gb 2Rx4 PC$-2133P-Ra0-10 seperately with the new PC (HP Z240 SZh3). It came with 8gb RAM. I replaced the 8gb RAM with 16gb RAM but it wont boot. Blinking RED power light which turns to white blinking light. HELP!
Relevancy 44.72%

nbsp HP Z Tower WorkstationProduct number L T AVTo update the Firmware I was provided this link by customer support http h www hp com hpsc swd public detail sp ts oid amp swItemId wk amp swEnvOid Using the link I was able Updating Firmware for Z240 to download and run sp exe nbsp Then Updating Firmware for Z240 a set of instructions appear as follows nbsp Another FWUpdLcl exe utility in the ME Flash Local-Win directory is designed to update the ME firmware within a -bit or -bit Windows environment from the Run box or a command prompt The ME can be updated by executing the following command FWUpdLcl exe -f BIN -generic Alternatively when running a -bit Windows environment use the command FWUpdLcl exe -f BIN nbsp nbsp -generic The ME Flash folder contains the binary update image to be used with the utility nbsp The update binary image and the Local-Win folder contents can be copied to any storage volume available within the Windows operating system nbsp nbsp Since I am using -bit Windows I assume I need to run the command nbsp FWUpdLcl exe -f BIN nbsp nbsp -generic nbsp My question is how do I complete this command i e how do I tell it which folder to look in to find the files nbsp Much thanks for any guidance nbsp nbsp

A:Updating Firmware for Z240

When you run HP service packs, they will expand and place their contents under an own directory within C:\swsetup.Specifically in your case, if you run sp74202.exe, you should see a new directory C:\swsetup\SP74202 has been created with the contents of the service pack within. Alternatively you can use 7-zip to peek inside the service pack exe without running it since the exe is a self extracting zip file that runs the installer once decompressed  In any case, a newer ME update exists here but i'd first apply the latest system firmware update available here. When looking at the HP service pack links above, it's good practice to selectively click each "Description", "Enhancements", "Installation Instructions" "Release Notes" "Fixes" and "Revision History" tabs and read the information (some of it is repetative but you'll soon learn where to focus your attension). The contents of these tabs contain important and relevant information on what has been improved, fixed, which system it's for, how to install the update, etc. And if a previously installed SP is not listed in the "revision history" tab, that release may have been pulled by HP due to some fauly behaviour or other issue! Pay particular attension to the prerequisits as in some instances firmware updates have to be stepped (that is you can't always simply apply the latest). And if you read such boaring stuff, the system firmware (BIOS) Installation Instructions tab would have given you a clue where the sp files are expanded to  Have you tried simply enter the command (as specified) via a command prompt window but changing directories to where the FWUpdLcl.exe file is located? Just keep in mind that sp74202 is the initial ME firmware release so nothing sould update  So best to apply the latest system firmware (BIOS), then the ME firmware, then maybe the latest ME software (under chipset drivers). Best to bookmark this page which lists all the downloads for your z240 Windows 10 64bit tower system so check it out periodically.
Relevancy 44.29%

HiI have bought a z240 tower which runs really well with win 7 pro. Recently, I wanted to add an SATA extension card, but without any success. I am looking for a simple SATA controller without RAID functionality (which unnecessary slows down the boot procedure). Unfortunately, HP does not offer any SATA boards as accessories - Is there any recommendation for such a card from your side? I've bought a LogiLink PC0059A card, unfortunately, the system does no longer startup when connecting drives to it. The hp BIOS  screen appears as usual, then the card shows the attached drives, after that the hp bios screen appears again and reamains without any reaction (reboot required). Thanks for any hints Tom
Relevancy 44.29%

Greetings nbsp We've purchased Dells for years but recently started (Graphics) 3.3 Beep Z240 SFF Code giving HP a look The first unit I received just stopped working during deployment testing and gives me long beeps red LED with short beeps white LED According to the manual this translates to The embedded controller has timed out waiting for BIOS to return from nbsp graphics initialization I couldn't Z240 SFF Beep Code 3.3 (Graphics) find any specific troubleshooting steps for this error so I did the following based on the testing I was doing nbsp - Cleared CMOSThe system wouldn't boot after applying BIOS settings using the HP BIOS Configuration Utility so maybe something went wrong there That said I applied settings with this tool multiple times before on the same system without issue nbsp but thought it was worth a start Here's my config file nbsp BIOSConfig Legacy Boot Options Disable Enable Legacy Boot Order HDD USB CDROM SATA HDD SATA NETWORK EMBEDDED UEFI Boot Options Disable Enable Configure Legacy Support and Secure Boot Legacy Support Enable and Secure Boot Disable Legacy Support Disable and Secure Boot Enable Legacy Support Disable and Secure Boot Disable- Swapped video cards Nvidia Quado K with a known good card We bought two units for testing so I had an identical system to swap from - Swapped memory - Reseated all cables nbsp Any ideas on what else I should try before sending it back
Relevancy 44.29%

Hello, My company recently purchased some Z240 SFF workstations and put in aftermarket multi-media card readers in the 3.5" slot. The card reader uses the internal USB 3.0 header, so I had to unplug the USB 3.0 cable for the for the front usb ports in order to get it to work. The media card reader works just fine in Windows, however, I get a POST error message on startup: "Cable detection Error 41A- Front USB2 Not Connected. Front USB cable has been detached or unseatted from the motherboard. Press Enter to continue." Is there anyway to disable POST messages? I can't seem to find anything in the UEFI/BIOS to do this.

A:Z240 POST Message disable?

One of the HP engineers who has been very helpful to us here has recently posted on a related question, and he has access to the schematics and the internal design details of these workstations.  His post is on this thread,  HERE : Dan tells how to jumper the header to make it believe the cable is still connected, and it would not matter whether you jumpered at the motherboard end or the far plug end, as long as you got the correct pins/plug holes jumpered. Note his caution.... that seems to suggest that the pins on the motherboard are not as stout as the ones we are used to seeing.  A proper sized insulated wire jumper with a short segment of wire exposed at each end can be used as a jumper at the far plug end of a cable, rather than the little plastic jumpers we use at the motherboard pin end of thins.  If you carefully figure out the wire colors this should work. The wiring of such headers/cables within a HP workstation family are usually the same, and things can stay the same from one generation to another, in my experience.
Relevancy 43.86%

Hello  Does anyone know how to enable legacy support on Z240 Workstation? Under "secure boot configuration" in BIOS I choose "Legacy Support enable and Secure boot disable" but I save and reboot, it reverses back to "Legacy Support disable and Secure Boot Enable" Any suggestion please? Many thanks
Relevancy 43.86%

Hi, I had a look inside and the Z Turbo drive appears to be connected to the motherboard (location 23 on the motherboard map in the manual) and not using a SATA port or any of the four main PCIe3 slots. Only one of the PCIe3 slots is being used and that is for the NVIDIA graphics card, and only one of the SATA ports is being used and that is for the Slim BluRay drive (connected to SATA3). That means there are 3 x SATA ports available, and 2 x 3.5" and 1 x 2.5" bays available, by the looks of it. My question is, is it possible to put 3 x HDD/SSD drives in it, i.e. 2 x 3.5" and 1 x 2.5"?

A:Adding drives to HP Z240 SFF with a Z Turbo drive

@jeffparker? Yes I believe you can add them. Check the quickspecs below: The following are supported.500GB SATA 7200 rpm 6Gb/s 3.5" HDD LQ036AA1TB SATA 7200 rpm 6Gb/s 3.5" HDD - LQ037AA2TB SATA 7200 rpm 6Gb/s 3.5" HDD - QB576AA3TB SATA 7200 rpm 6Gb/s 3.5" HDD - QF298AA500GB SATA 7.2K SED SFF HDD1TB SATA 7200 rpm 8GB 3.5" SSHD (hybrid) - M7S54AA And the following SSD'sA3D25AA 128 Gb sata 3A3D26AA 256 GB sata3D8F30AA 512Gb Sata3F3C96AA 1Tb Sata3G7U67AA 256 Gb Sata3 SED OPALT3U07AA 240 Gb Ent class 2T3U08AA 480 Gb Ent class 2
Relevancy 43.86%

Hi. I am trying to run the intel onboard graphics and an nvidia quaddro on the same machine simultaneously. HP says it is possible to do so but I cannot find the option in the BIOS to enable the onboard graphics as a primary driver. Right now, the onboard graphics cards becomes automatically disabled as soon as I plug the Nvidia in.  Thanks for your help
Relevancy 43.86%
Relevancy 43.86%

Dear all, I am going to buy a HP Z240 tower workstation. Do anyone know that the decibel of this computer? Is it louder? Do you know which HP workstation works quietly? Many thanks! Celia
Relevancy 43.86%

I am trying to install Windows 7 on a HP Z240 SFF workstation but when I boot from the Windows 7 USB media, it does not show the HDD even though it is connected.  it would be great if someone could help me out with this issue. Thanks in advance.

A:Unable to Install windows 7 on HP Z240 SFF Workstation

Hello matt_william,  If you are using a retail version of Windows 7 Operating System. You may have to install the Intel Rapid Storage Technology driver while installing the OS. On the HDD partition windows, you will get LOAD DRIVER option, you have to install Intel Rapid Storage Technology driver.   Please find below link to download Intel Rapid Storage Technology driver. NOTE: THIS ACTIVITY NEED TO BE PERFORMED ON ANOTHER UNIT.   TO USE THE INTEL RAPID STORAGE TECHNOLOGY DRIVER DURING A NEW OPERATING SYSTEM INSTALLATION: 1. Download the file by clicking the "Download" or "Obtain Software" button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved). 2. Double-click the downloaded file and follow the on-screen instructions. 3. Navigate to C:\SWSETUP\SP73487 and unzip "" to a USB key for a 64-bit installation. 4. Use the newly created driver installation media during operating system setup to install the drivers.  Once you copy the driver on another USB media, connect it with unit on which you are trying to install OS.  Click on Load Driver and navigate to USB and install the driver. Once the installation is complete, You will be able to access HDD and will be able to install OS.  I hope that answers your question.  I am an HP employee, the opinions expressed here are my personal opinions, not of HP. Make it easier for other people to find solutions, by marking my answer ?Accept as Solution? if it solves your problem. ***Click on "Thumbs up" button to the left side of my post to acknowledge the post ***
Relevancy 43.86%

Hello  Does anyone know how to enable legacy support on Z240 Workstation? Under "secure boot configuration" in BIOS I choose "Legacy Support enable and Secure boot disable" but I save and reboot, it reverses back to "Legacy Support disable and Secure Boot Enable" Any suggestion please? Many thanks
Relevancy 43.86%

I just got a HP Z240 Tower with a 400W power supply, 32 GB of RAM and 512 GB M.2 SSD.  Is the GeForce GTX 970 Graphics card compatible?  My PCIe v3 x16 slot is available.

A:HP Z240 Tower Compatible with GeForce GTX970

Greetings, The 400 power supply could be an issue. A stock GTX 970 lists a recommended 500 watt power supply. You have to verify the 10.1 inch to 10.5 inch card will fit in your chassis. You should have the required UEFI BIOS if the system is brand new and you have a PCIe x16 3.0 slot available on the system board. Cheers!
Relevancy 43.86%

Brand New HP Z240 Tower Workstation with HP Solid State Drive will not BOOTHP diagnosticsHard Drive SMART Check: WARNING (1: NOT AVAILABLE)Hard Drive Short DST Check: NOT AVAILABLE (1: NOT AVAILABLE)
Relevancy 43.86%

I have an ASUS P X pro with Win ultimate that was upgraded from Win I have a multi boot system with old versions like Win Win etc I have been noticing that my Giga network will sometime reset from to so decided to upgrade the drive to the Win bit driver The installation failed and I don t recall what the issue was Sorry I didn t expect to be in this much trouble so I just went ahead to fix the problem The status Win all driver NIC update to are missing Tried driver 10 now NICs to now is that all NICs that I have or ad to the system shows up nicely in the device manager under network adapters but when I look at the Network and Sharing Center Tried to update NIC driver to Win 10 driver now all NICs are missing there are no networks I have deleted all the network adapters rebooted and the devices are repopulated in device manager but no networks are available in the Network and Sharing Center I have tried adding various other network adapters like USB Giga Ethernet adapters and different WiFi USB devices of them are new Win compatible devices They all show up in device manager and nothing in Network and Sharing Center Basically it sees the network adapters in device manager but the Network and Sharing Center says I don t have any devices I tried to restore to Tried to update NIC driver to Win 10 driver now all NICs are missing before the diver update but I don t have a restoration point I also don t have a backup to restore It looks like I need to remove all network software from Win and reinstall it Any ideas how to fix this
Relevancy 43.43%

Hi all, I got a Z240 SFF workstation with a 512G HP Z Turbo Drive G2 intalled on M.2 slot as a boot drive. I recently add a 1.2T Intel 750 PCIe SSD on PCIe slot 4 for additional storage. However after the Intel 750 SSD was intalled, the computer began to shutdown automaticly after couple of minutes running. The issue will be fixed after remove the Intel 750 SSD. The system is running 64bit Win10, with Samsung NVMe Driver. The Intel 750 SSD can also be read and write when installed and Intel Data Center Tool shows that the SSD is healthy. I think the auto shutdown issue is related to overheating on 750 SSD. I am wondering if the motherboard of Z240 SFF is compatible with Intel 750 SSD. Does anyone have Intel 750 PCIe SSD installed on their Z240 SFF or any other Z Workstation? Thanks! NOS_ATX
Relevancy 43.43%

Hello. I am currently working on getting a fresh installation of Windows 7 on our HP Z240's in order to create our standard business image. I was able to install Windows 7 Enterprise but am having one issue. Whenever the workstation goes into sleep mode it will do a hard shutdown. I've installed the latest drivers found here for the chipset, graphics, NIC and sound. The issue still occurs. I've done the same on three different workstations and have experienced the same issue between all three. The OEM Windows 7 installation has no issues on the same exact workstation. Can anyone assist me with this? Thank you!
Relevancy 43.43%

Hi, I?d like to install a media card reader (e.g. HP 468494-005) into the shared internal/external 3.5" drive bay of my HP Z240 SFF workstation but it doesn't fit. It probably needs a carrier of some kind, because the casing is just a bit too wide and there are no holes for the standard screws. I couldn't find any instructions on the HP website. Any help would be greatly appreciated!
Relevancy 43.43%

It appears that newly shipping Z240 Tower workstations DO NOT have an internal USB header anymore?  The System Board Overview graphic in the Maintenance & Service Guide (Oct 2015) shows #7 as a USB 2.0 internal header.  However, the location where the header should be on the system board is actually a 1x6 pin header (P150) listed as "MEDIA".  The other USB 2.0 Header, #5, is taken up as the front USB cable. So is there an updated manual that shows what is actually on the system board?  The Z240 Tower QuickSpec is dated March 2016, so I'm hoping there is a newer manual out there somewhere.   Any idea what the P150 MEDIA header is for?  Is this for the old media card readers?  I have the optional SD card reader, but that is attached to #8 which is the internal USB 3.0 header. Any way to attach deveices that need an internal USB 2.0 header?
Relevancy 43.43%

Guys, I just erceived a new z240 workstation and cannot find where to disable DEP in the BIOS.  we have 3 z230's and I found it in that bios.  Can anyone help.  Have legacy software that will not install correctly with DEP enabled. Thanks
Relevancy 43.43%

Hi there nbsp My work machine is a HP Z SFF PC Last month the machine began randomly hanging and displaying blue screen errors There isn't much in the way of discernible patterns but it tends Z240 SFF blue crashes and HP screens random hangs, to happen when the machine is in use rather than idling and I can consistently reproduce it when using the Prime stress testing utility When I set it to maximise CPU heat as soon HP Z240 SFF random hangs, blue screens and crashes as I stop the test the machine blue screens indicating a cooling issue The machine's fan is very quiet although on occasion it gets very loud after a restart and then quietens down I would expect the fan to get louder as the CPU gets hotter during the HP Z240 SFF random hangs, blue screens and crashes stress test but this doesn't happen so I wonder if the fan is malfunctioning and if this is a known issue with these machines or if there is any possible resolution nbsp Please see below for the output of BlueScreeView which displays the error codes produced by recent blue screen errors nbsp nbsp
Relevancy 43.43%

Issue: Whever the system is booted/rebooted after POST, while transfering control to OS, the system goes into a pause/halt (keyboard and mouse doesn't responds)Workaround: As soon as one of the monitors is turned off, seems control passes to Windows 7 ("Loading windows" on black screen shows up) and boots normally, now the monitor can be turned on and dual display works as usualAdditional info: While the system is paused, if the NUM/CAPS/SCROLL lock is pressed in a particular sequence (even though the lights actually don't respond), it looks like the key-press sequence gets stored in buffer. This is verfied once one of the monitor is turned off, the same keypress pattern lights up on the keyboardSetup: z240 with 2x23" monitor connected to Display-ports, HP smartcard keyboard and mouse connected to rear USB. BIOS version 1.11 (SP74759)Has anyone experianced similar issue or anyone has a fix for this?

A:z240 boot issue with dual monitor setup

Same here.New Z240 workstation with Xeon E3-1245 v5 and two monitors HP Z24n, both attached on the motherboard's DisplayPorts.OS: Windows 7 Enterprise x64 Sp1 with latest patches and drivers (including monitors' one), BIOS (01.27 Rev.A)  I found two workarounds: power down and restart, or briefly attach another DVI monitor. I will try your trick to power off a monitor.  P.S. Initially I had the same problem using two Samsung DVI monitors and HP DisplayPort->DVI adapters. I thought it was a problem with the signal conversion and changed monitors. Probably this post is an instance of the same problem:
Relevancy 43%

I can't get new Z workstation to boot into WinPE on Windows x Windows x and Windows x with only and NVMe drive installed to the M slot on the MB I've tried plain OEM Media and WDS with WinPE with different drivers added to the boot wim file all no luck nbsp It seems there must be some sort of bug relating to the Samsung nbsp pro nbsp M nbsp NVMe GB drive I'm using When I leave this as the only drive CDRW the computer always hangs as soon as WinPE starts If I leave the Samsung NVMe drive installed and add another SATA drive such as a Samsung Pro SSD it behaves fine- WinPE then loads and I can see both drives nbsp I was able to install Windows nbsp on the NVMe drive and booted into Win as long as the SATA drive was present As soon as I removed the nbsp SATA drive nbsp and it starts loading windows it immediately hangs again nbsp It shouldn't be NVMe driver support as Windows WinPE has native windows when or booting Samsung... hangs Workstation WinPE Z240 NVMe support and has the same problem so it must be something else I suspect it's either something I have to turn off in the BIOS or some other BIOS UEFI bug nbsp Has anyone seen this before nbsp Thanks nbsp Edit Z has latest BIOS
Relevancy 43%

I have upgraded from Win 7 to Win 10 and tried everything mentioned in this thread, but cannot remove the yellow flag.  Code 10 error in the device manager. registry entries are: any other suggestions? Chris

A:High Definition Audio Device has Yellow Flag on HP z240

Hi: Do you have the same issue with the same hardware ID? If not, please post the hardware ID for the HDA device that needs the driver. I only see W10 graphics driver for the nvidia graphics adapter.
Relevancy 39.13%

Help help help!

I am a near Luddite when it comes to computers and my teenager has managed to pretty much "kill" her laptop and I am trying to fix it as I don't have the money to take it to a repair shop.

I get the following message when I switch it on..

\windows\system32\missing32.dl is corrupt/missing

it also advises me to put the Windows Vista disk in and re-install Vista.

However, the teenager has also managed to lose the Vista disk so I really don't know what to do.

Any help at all appreciated.

A:Missing driver

What make and model is it?
Relevancy 39.13%

Recently did a repair on a customers Dell Dimension 2100...

I have all the drivers from the website but cant seem to find the network adapter..

He has 2 of these machines (identical) and one has a network adapter called "Westell Wirespeed Dual Connect Modem 2" in device manager...

Of course the one that I did a clean format of xp on is missing this driver.. But its not even listed on dells site!

If someone could please direct me in the right direction for this driver download it would be greatly appreciated...

The date of the driver is 8/23/2001
heres a link to it, but of course it no longer available...

Relevancy 39.13%

The device manager found a missing driver a few days after I though I found all the drivers. When I open or close the lid the USB connect/disconnect sound plays and windows tries to automatically find the driver to no avail.  I just found this..usb.inf:Generic.Section.NTamd64:BADDEVICE.Dev:6.1.7601.18328:usb\unknown Everything else in the drop down tree is Intel, since I have an Intel should I uninstall it? 

DV4 1430US

A:Another missing driver

Scratch that.... I just installed the web cam software, I found out that the built in cam wasnt plugged in securely. So far everything seems OK.

DV4 1430US
Relevancy 39.13%

Several weeks ago I had a "power glitch" of some sort - and yes I am using a quality surge protector.

The computer restarted OK but I have errors showing in Control Panel for the PS2 port (mouse is working correctly), and under "Other Devices" errors for my 3com Etherlink, PCI comm device, and PCI audio device (Turtle Beach).

I also have an Ultra66 card with dual HD and CDs and all are working OK.

I have tried reloading the ethernet and sound card drivers but I get reports that the system cannot find either device.

Device Manager says that there is no PCI driver installed. I cannot find any source for PCI drivers. Any ideas?

Relevancy 39.13%

Hi, I have a problem with nissing driver for multimedia audio controller, where can I get the require driver

A:missing driver

What is the make and model number of your computer?
Relevancy 39.13%

my driver gone from my computer and its nowhere to be found!!...please let me know if there is a way to download or install it again!!..plz!!

Relevancy 39.13%

I had to have my computer reformatted due to a virus. However, when I got it back it now doesn't show any pictures in menus such as My Pictures. Instead of the picture it shows a general sky over a mountain and lake picture. They all open fine and none are missing so maybe it's a driver missing. Anyone have any ideas?

A:Missing Driver?

Hi simonshigs

What pictures are you looking for?
Relevancy 39.13%

I had problems with a recent graphics card installation and so got in contact with power-color (tul corporation).

Thay told me to uninstall my radeon, on-board vga(uninstall only), and agp drivers and update them. i did all of this. Except for the AGP driver.

When i install it the following messgae appears...

"Failed to install windows XP Agp driver.
Setup will exit".

I need to re-install the agp driver so that my graphics card works correctly, but without wiping my computer i have no idea how to do this. Can anyone help?
Im using the sis 741 chipset.

Relevancy 39.13%

i have a G50-80 lenovo laptop with windows 8.1 preinstalled.installed windows 7 32bit because of work related old missing drivers and i cant find them.-SM-Buscontroller-Universal Serial Bus (USB) -controller i read i have to change usb settings in bios, but i cant find any usb settings. i have the latest bios.i can choose "os optimized" "windows 8.1" or "other" i choose other. cant find oler bios either. is this a bios problem or usb driver problem? 

A:G50-80 missing usb driver

hi thomasb84,
Can you install these drivers:
For the SM Bus Controller:
Intel Chipset Driver for Windows 7 (64-bit)
For the Universerial Serial Bus (USB) Controller:
USB 3.0 Driver for Windows 7 (64-bit)
When finished, reboot the machine and observe.
Sorry I overlooked that you installed a Windows 7 32bit so the 64bit drivers above won't obviously work.  You will need a 32bit driver for Broadwell system (i'm not sure if the Win7 32bit drivers from the G50-70 (Haswell) system would work but you can try it out).
Other drivers that you can try:
Intel USB3.0 Driver
If the drivers above doesn't work then I'm afraid you will need to move to Win7 64bit.
Relevancy 39.13%

Need help cant find a driver for the wireless card in my HP 14-af113au Note book just did a clean install with windows 7 Ultimate and the automatic updates wont work as well they constantly stay on checking for updates its been going to over 24hrs 

A:Missing Driver

Hi you can find all the drivers requried for your PC in the link below or  Wifi driver only :
Relevancy 39.13%

dosmenu.bat is missing how do you fix please

A:missing driver

Hi and welcome to TSF if you have a install or recovery disc you Could try a start up repair
Relevancy 39.13%

All of a sudden my sound went scratchy. When I checked it out I got a message my mmdriver.inf was bad. How do I reinstall it.

Relevancy 39.13%
Relevancy 39.13%

I ran my AVG PC Tune-Up and it showed me I had 1 issue it couldn't fix. I have a Device Driver "lsnfd" missing. I ran Driver Up-Date, though, and it says I have all my drivers. I tried going to the Device Manager and right clicking the driver to see if I would get a choice to update it myself but it doesn't give me that option.

Is this a video driver and can I download a new one from the internet?

A:Missing Driver

lsnfd is related to something called " Linksicle" . . which may be an infection

It sounds like you need help with cleaning out malware, Please follow our pre-posting process outlined here:

NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

After running through all the steps, please post the requested logs in the Virus/Trojan/Spyware Help forum, not here.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.
Relevancy 39.13%

Hi, I wanted to disable my in-built keyboard because 'windows help and support' kept popping up everytime I had to work. I followed the steps: Device Manager -> Keyboards -> HID PS2 Keyboard and, Uninstalled it instead of disabling it. Consequences : 1. My in-built wasnt responding(which was fine for me)2. My touch pad isn't working( this was obvious)3. I have an external keyboard and mouse to support me but, now, my ports aren't ready to respond because of the missing drivers. So, I have no way out. I have Windows 7 Ultimate, which isn't being displayed in the drop down menu of hp's driver support(tried downloading the drivers from this site, too). Please help !!
Relevancy 39.13%

The sound driver on a new computer my friend has just gotten wasn't installed when we made a clean format of Windows. Is there a way to find out what driver he needs in order to get the sound to work (besides dxdiag, because that doesn't register it either). He's running XP Home.

A:Missing Driver...

You can go to the manufacturers support website and download the driver.
Relevancy 39.13%

Hi Again,

Don't know what I would do without this site.

I'm running XP and IE 7.

I've been running fine then all of a sudden when I go to start my antivirus program Freedom came with Sympatico I get the following error

Security Manager was unable to load a required security driver (PKT). The diagnotic tool may be able to fix this problem.

But when I run the test it says its fine. Anyone know for startes if this driver is part of my freedom package or something else.

All of a sudden all of my "Cookie" folders are gone to

Deserate for help


A:Missing Driver

Looks like Santa came early, he ate your cookies.........(just kidding). If your missing a driver your system should look for it if not, it will search the net for one. Good luck.
Relevancy 39.13%

I have a computer with a Mitsumi fx 4010 CD drive. The driver was apparently accidentally deleted when I tried to clear the hard drive and instead zapped the operating system, Windows 95. When I reinstalled it, the driver was missing. Can anyone help, please? Thank you.

Relevancy 39.13%

Hallo! I've just installed Windows 10 on Elitebook 2540p. Everything is fine, but one device is not recognized. ACPI\HPQ0004\3&21436425&0 Hardware-IDs: ACPI\VEN_HPQ&DEV_0004ACPI\HPQ0004*HPQ0004 BIOS Name\_SB.PCI0.ACEL Please, suggest me what is it and if possible provide me a link to the driver.
Relevancy 39.13%

Ok. I have a Toshiba Satellite A215-S4697 Laptop computer with Windows Vista, I'm not sure what service pack. When a DVD or CD is inserted into the drive and is played it says that is does not recognize the disk. I've tried to update the driver but it says I have the best driver. I look and it says i have a currupted or missing driver (39). I've tried cdgone and it will not work and i've tried to download a new driver but it still didnt work. Please help i need it to be fixed today by 11.00 please help!!!

A:Missing DVD Driver

See the Advanced troubleshooting section of this article for the solution:
The solution actually applies to not only Windows XP but Vista as well.
Relevancy 39.13%

My Desktop computer has Win7 home edition on it.

For some reason, after doing a clean up, the computer will no longer connect to the network.
I found a place that says REALTEK PCI FE Family Controller Driver is missing.

I can't seem to find anyway to get it loaded again. Since they say the windows 7 operating system was not included when I bought the computer!

It was put on there when I was around, but I don't have CD. But it wasn't an OEM.

I've tried anything they say to try, sonce this seems to be a prolem, but nothing works.

I am using my laptop to ask you thiese things, because Nothing can be downloaded on the desk top sonce it won't connect!

A:Driver missing

What is the make and model of the computer or if a custom build the make and model of the motherboard, once you have that you can go to the makers support page for your model and download the drivers you need.
Relevancy 39.13%

Here's Missing? Driver CD/DVD the story I'm building a multimedia server that is going to be running Windows Ultimate as the OS I have a full version of Windows Ultimate and I created a bootable CD/DVD Driver Missing? flash drive and loaded the ISO files on it This new system doesn't even have a CD DVD drive installed on it which is why I'm using a flash drive to install it Everything boots up fine from the beginning asks me for the language and all the other stuff When CD/DVD Driver Missing? I click on INSTALL it then gives me a screen that says Quote quot A required CD DVD drive device driver is missing If CD/DVD Driver Missing? you have a driver floppy disk CD DVD or USB flash drive please insert it now Note If the Windows installation media is in the CD DVD drive you can safely remove it for his step quot I have done a little bit of research and people suggest using the SATA drivers for the motherboard I've tried that and still doesn't work I have all the minimal stuff on the motherboard Only one SATA HDD GB WD Green GB of RAM USB keyboard and mouse and that's it The only thing I can think of is that Windows doesn't realize it's being installed from a flash drive I tried hooking up a DVD ROM drive to see if that would help but still got the same error You guys are my last hope to get this working Please help

A:CD/DVD Driver Missing?

Nevermind, figured out the issue. After doing some additional research online, most people had experienced this issue when burning the ISO onto a DVD and 99% of the time it turned out to be a bad burn or a corrupted download.

In my case what happened was that while preparing the flash drive, a friend of mine recommended opening up and extracting the ISO using WinRAR (which I have never used with an ISO), and for some weird reason WinRAR was only extracting 358MB's instead of the 3.13GB's of data.

So after realizing what happened, I wiped the flash drive, mounted the ISO using Daemon tools and extracted the contents (the whole 3.13GB's) and put them on the flash drive.

The install seems to be going smoothly now so this thread can be locked and considered resolved.
Relevancy 39.13%

Hi, all. I just did a reinstall, but the drivers for my 9-in-1 Media Reader are missing, and I can't find them. Please help me.

Computer model:

Mobo model:


A:Missing Driver

Did you install the chipset drivers? I'd point you to them, but Gateway wants a serial number to look at any of their pages.
Relevancy 39.13%

I am using a HP Pavilion S5148HK desktop PC running on Windows Vista.  The OS informs me that I am missing a driver for the ?multimedia controller? located at PCI bus 3, device 0, Function 0 and the following hardware IDs: PCI\VEN_1131&DEV_7160&SUBSYS_30021B0A&REV_03PCI\VEN_1131&DEV_7160&SUBSYS_30021B0APCI\VEN_1131&DEV_7160&CC_048000PCI\VEN_1131&DEV_7160&CC_0480 Please direct me to a solution.

View Solution.

A:Missing driver

Hi: I believe that is the TV tuner that needs a driver.
Relevancy 39.13%
Relevancy 39.13%

I have recently formated my computer and i have an exclmation mark by one of the devices in the device manager. I have had this happen before where i get an exclamation mark but it doesnt tell me what the driver I am missing so I dont know where to go to get a dirver. Can any tell my what driver i am missing by the file i have attached.


A:missing driver

try this.

Relevancy 39.13%

hi all i am in middle of pulling my hair out all help with my problem appreciated i recently formatted my pc only to find no driver driver missing i have looked at various sitews but cannot find it Field Value Computer Computer Type ACPI Uniprocessor PC Operating System Microsoft Windows XP Home Edition OS Service Pack TRIAL VERSION missing driver Internet Explorer DirectX DirectX c Computer Name HOME-A missing driver D missing driver A A User Name Owner Logon Domain TRIAL VERSION Date Time - - Motherboard CPU Type Intel Celeron D MHz x Motherboard Name Foxconn P M P MB Series PCI AGP DDR DIMM Audio Video LAN Motherboard Chipset VIA P M Pro System Memory TRIAL VERSION BIOS Type Award Communication Port Communications Port COM Communication Port Communications Port COM Communication Port Printer Port LPT Display Video Adapter VIA S G UniChrome Pro D Accelerator VIA S G UniChrome Pro Multimedia Audio Adapter Realtek ALC VIA AC Enhanced Audio Controller Storage IDE Controller Standard Dual Channel PCI IDE Controller IDE Controller VIA Bus Master IDE Controller Disk Drive Generic USB CF Reader USB Device Disk Drive Generic USB MS Reader USB Device Disk Drive Generic USB SD Reader USB Device Disk Drive Generic USB SM Reader USB Device Disk Drive WDC WD BB- JHC GB IDE Optical Drive PHILIPS SPD L SMART Hard Disks Status OK Partitions C NTFS TRIAL VERSION Total Size TRIAL VERSION Input Keyboard Standard -Key or Microsoft Natural PS Keyboard Mouse PS Compatible Mouse Network Primary IP Address TRIAL VERSION Primary MAC Address - - - - -CF Network Adapter Realtek RTL Family PCI Fast Ethernet NIC TRIAL VERSION Modem Motorola SM Speakerphone Modem Peripherals Printer Microsoft XPS Document Writer USB Controller VIA VT USB Universal Host Controller USB Controller VIA VT USB Universal Host Controller USB Controller VIA VT USB Universal Host Controller USB Controller VIA VT USB Universal Host Controller USB Controller VIA VT USB Enhanced Host Controller USB Device PC Camera a VGA USB Device USB Mass Storage Device DMI DMI BIOS Vendor Phoenix Technologies LTD DMI BIOS Version PG DMI System Manufacturer iQon ie DMI System Product P M P MB DMI System Version rev DMI System Serial Number TRIAL VERSION DMI Motherboard Manufacturer Foxconn DMI Motherboard Product P M P MB DMI Motherboard Version DMI Motherboard Serial Number TRIAL VERSION DMI Chassis Manufacturer DMI Chassis Version DMI Chassis Serial Number TRIAL VERSION DMI Chassis Asset Tag TRIAL VERSION DMI Chassis Type Desktop Case DMI Total Free Memory Sockets this is my system anyone any ideas

A:missing driver

Hello,Please try Post Back if you have issues!
Relevancy 39.13%

So I recently uninstalled Sonic DLA and now my DVD and CD drivers aren't being recognized.

I have a Dell XPS 400 running Windows XP.
these are the devices:

I've already followed the directions here for editing the registry for the DVD-ROM, I just need to know which registry I need to edit for the CD-RW drive. Thanks.

A:CD-rw driver missing.

Nevermind! That solved both problems, you can close this.
Relevancy 39.13%

Hi, i have installed windows 7(64 bit) 0n my notebook pavilion 15-p238tx and all the drivers are there except for lan driver, the wireless is working but when i plug in the cable of ethernet that shows nothing and when i looked into that it says that the ethernet/LAN driver is missing.kindly help me out as soon as possible

A:LAN driver missing

Hi: You need this ethernet driver... This package provides the Realtek Local Area Network (LAN) Driver that enables the Realtek Network Interface Card (NIC) Chip in supported notebook models that are running a supported operating system. File name: sp68947.exe
Relevancy 39.13%

I've just re installed windows 7 onto my lap top worked fine before but this time it has removed the wireless driver. The lap top is a Packard bell easynote and about three years old. I have contacted Packard Bell who have said they ony have the drivers from upto two years so no chance getting the driver form them also tried PC World with no help therr. Can anyone suggest any other way of getting the driver.


A:Missing driver

We need the excat make and model number of your laptop please.
Relevancy 39.13%

ran a performance check on my pc Windows 7 and this came up !   (   The device, MpKsld43d323f, is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ROOT\LEGACY_MPKSLD43D323F\0000. ) can anybody help thank you nikki

A:missing driver ?

Goto device manager, view,show hidden files, uninstall device.
Relevancy 39.13%

I have a sony vgn-nw240f I reinstall the OS to Win7 64 but the Fn keys no longer work, and I unable to find the proper driver, could somebody help me?

A:Fn Driver missing!!

You likely need to install the Sony Shared Library and Sony Notebook Utilities. Note that per the Sony Support site you should install the Sony Shared Library first, and then the Sony Notebook Utilities.

Sony Shared Library:
Sony Notebook Utilities:
Relevancy 39.13%


A:Missing Pci Driver

Please don't type in all caps, it's hard to read

That would be the usb ports, do you have any usb devices attached to the computer??????

Probably just going into the bios and setting the assign irq to usb to enabled will get rid of the error.
Relevancy 39.13%

just formated hard drive. Reinstalled XP. Now it tells me I am missing The Microsoft System Management BIOS Driver. What is it,What does it do, and where can I find it? I tried to find it on the XP CD but couldn't. Some days it doesn't pay to get out of bed. THANKS.

A:Missing Driver
Might be it.
Relevancy 39.13%

When i use Videoimpression,i get vfw driver not found or missing when i try to capture video from my webcam.It use to work before the pc crashed.I have reloaded videoimpressions and cam drivers including software but i still cant get it to work.Does anyone know where i can download a vfw driver?I am useing xp pro.

A:Vfw Driver Missing?

bushbasher said:

When i use Videoimpression,i get vfw driver not found or missing when i try to capture video from my webcam.It use to work before the pc crashed.I have reloaded videoimpressions and cam drivers including software but i still cant get it to work.Does anyone know where i can download a vfw driver?I am useing xp pro. Click to expand...
Relevancy 39.13%

I'm missing the driver for the "Wave device for voice modem",and for some reason I can't seem to locate it at all.On the disk for the 56K/V.90 on the bottom it does say Voice modem,but I tried every folder on the disk,and Windows can't find it.I even tried all the driver disks that I have and looked through all the folders with no luck.
Anyone have any ideas?Thanks...

Relevancy 39.13%

I use windows 7 ultimate x86. I can not install usb driver. Plz, help me.

A:[Help] Missing USB driver

Go to and follow the links to the support page. Enter your specific product ID number, and go to the "drivers & downloads" section. It should display a list of drivers available for your system, starting with the most recent. USB is supported by your motherboard, which requires its own driver.

Download and run the .exe file - it will ask you to specify a location to extract the files to. Remember where you saved them. Finish doing whatever the installation program tells you to. Then, restart.

Go to the Windows Control Panel, and double click the item titled "system". Click the "Device Manager" button under the tab labeled "Hardware". This should give you a list of all of the devices running on your computer. The ones with driver problems will have a yellow question mark (or something like that).

Right-click one of the USB controllers that is giving you problems and select the option to install or update the driver. Select "install from a specific location". In the next window, select "Search for the best driver in these locations". Uncheck "Search removable media", and check "Include this location in the search". In the box below, type in the address of the folder where you extracted the drivers from the installation software. (There should be a .ini file in that folder).

Follow the rest of the prompts, and your problem should be solved. Good luck.
Relevancy 39.13%

Have a small video/stills camera, which worked fine on my old laptop (running Vista), now on Windows7 it cannot find drivers.
Vista found and installed drivers automatically but no such luck now.

The camera is a DVK808, but cannot find the manufacturer anywhere (Korean or Japanese?)
Windows says it cannot find 3 imaging drivers, and I cannot find anything on the net to help me.
Any idea which to use?


Relevancy 39.13%

Hi there guys,

I just got my new computer and installed Vista 64 Bit on it and after installing all the discs that came with it, I come down to one last driver.

An Unknown Device located at Intel(R) ICH10R LPC Interface Controller - 3A16, its Hardware ID is PNP0700.

I running an i7 build:

Core i7 920
Gigabyte GA-EX58-UD4P Motherboard
Seagate SATA 1TB 7200.11
Kingston 6GB 1333mhz RAM
Gigabyte GTX 275 896mb
TP-Link Wireless Card - WN851N
Pioneer DVB-217 DVD Driver
Pioneer Blu-ray Combo Drive
Antec TruePower Quattro 850W
Antec Nine Hundred Two

I have tried updating to the latest drivers of everything but nothing helped. Anyone can tell me what driver I am missing and perhaps provide me with a link to it?

Thanks a lot if you can help me out.

Relevancy 39.13%

I have purchased two 2.5" IDE hard drive enclosures (thought first one was broken). Whenever i plug in the USB cable, windows 7 tries to install the driver, but does not install the correct driver. I can see in device manager that a mass storage device is plugged in, but I can't access the device (i'm assuming its the wrong driver).

I know the IDE drive works, because if i put it back into my old laptop it boots up just fine (i have win 7 installed on it). Also, I tried installing the drivers on the disk it came with, and checking the manufacturers website without any luck. The enclosure is a Sabrent sbt-eku25.

Does anyone have the driver for USB to IDE on windows 7??? Or any other solution, if this is not it.

A:USB to IDE win 7 missing driver-please help!!???

Try the solution on this page.

USB to IDE drivers - Vista Forums
Relevancy 39.13%

Hi Everyone

I have a Dell inspiron 5160 with 512MB of RAM and Pentium 4 CPU 2.80GHz, It was running XP and was very slow so i installed windows 7 32 bit on it,I know your suppose to have better hardware for win 7 but i tried it anyway, Its runs really well but my PCI modem driver is missing, I downloaded it and tried install it in compatibility mode but it did not work, Any help would be appreciated.

Thanks in advance

A:Missing Driver

Got this problem sorted, Eventually got a driver to install in compatibility mode.
Relevancy 39.13%

Hi i had a virus and i ended up wiping out my operating system, then i bought windows 7 and installed it. But when i did, the display adapter for my laptop screen disappeared. I have been dual screening for awhile because i had an accident and my screen cracked so i've been using an external monitor. I try to play online games but i cant because my graphics card is kind of innactive and i cant find a way to get another driver to get the laptop screen to come back on. can anyone help me?

A:Driver missing

Hi and welcome,

Are you sure this is a driver issue? I'm not sure if it is. If you cannot see the screen how do u install drivers?
Relevancy 39.13%

Tech Support Guy System Info Utility version
OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 1
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7150M / nForce 630M, 64 Mb
Hard Drives: C: Total - 143996 MB, Free - 21682 MB; D: Total - 8628 MB, Free - 1400 MB; F: Total - 953198 MB, Free - 145905 MB; H: Total - 1907726 MB, Free - 1584261 MB; I: Total - 381458 MB, Free - 10370 MB;
Motherboard: Quanta, 30CF, 85.17, None1
Antivirus: Norton Internet Security, Updated: No, On-Demand Scanner: Disabled

Missing cd dvd drivers for this computer not showing up in my device manager or in my computer list

A:missing cd dvd driver

just a question, how long have you not had the dvd/cd drive?, can you use system restore?...(i guess thats
edit, what are you using for anti virus? says you disabled norton, do you plan on uninstalling completely?
Relevancy 39.13%

I downloaded a Malwarebytes trial because my computer was slower than it should be. After running a scan, 93 problems were detected and deleted them. Then the problem started happening. My computer will not detect a wireless connection of any kind and when it tries to a window pops up that says that windows explorer stopped working. Then windows explorer restarts. and the process repeats. all of this started after I deleted the Malwarebytes detections. Please help!

A:Possible missing driver

Apart from this problem is your PC running normally?

Do you have an OS disc or did this system come preinstalled with a Recovery partition?

What OS are you using?