Windows Support Forum

How can I get windows 7 sp1 to load a print driver that's compatible with the HP printer that's on my home network wirelessly. My laptop see's it, but won't load a driver?

Q: How can I get windows 7 sp1 to load a print driver that's compatible with the HP printer that's on my home network wirelessly. My laptop see's it, but won't load a driver?

I can't seem to get Windows 7 SP1 to load a driver for an HP printer that is on my home network. My laptop sees it but won't let me make it the default printer or load a driver so that I can link to it wirelessly. I restored my laptop back to windows 7
because Windows 10 was moving too slow. I only have 4gigs of memory, and windows 10 probably runs better with 8gigs of memory.

https://social.technet.microsoft.com/Forums/en-US/f52ee902-9022-4792-a1df-5a658bebc843/how-can-i-get-windows-7-sp1-to-load-a-print-driver-thatamp39s-compatible-with-the-hp-printer?forum=w7itprohardware
Relevancy 100%
Preferred Solution: How can I get windows 7 sp1 to load a print driver that's compatible with the HP printer that's on my home network wirelessly. My laptop see's it, but won't load a driver?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 81.53%

I'm working with a Dell Dimension C521 PC. It came with a PCI-Express video card which apparently has failed, yet the motherboard itself has on-board video. The system will boot using this video output (as opposed to the card which produced nothing) but when it finally gets to windows the auto-detect driver routine kicks in and begins to detect the video card, prompting the user to "Continue Anyway" to finish installing unsigned drivers. Unfortunately this event takes place in front of the installation of the USB keyboard and mouse (times like these I wish it had PS/2 ). Anyway, whether I boot up into Safe Mode or normal a prompt comes up about installing drivers for the on-board chipset. I can't interact with it because the driver install routine for the keyboard/mouse becomes interrupted.
 

A:Dell Dimension C521; USB key/mouse driver load interrupted by video card driver load

Bump. I've been thinking... the only way I think this can be fixed is if I boot from a Linux CD or something similar and delete a particular set of drivers for this video card. It can't prompt you to install any drivers if they don't exist, right? But I don't know where to go to delete such files and prevent them from automatically trying to install themselves. Any ideas?
 

https://forums.techguy.org/threads/dell-dimension-c521-usb-key-mouse-driver-load-interrupted-by-video-card-driver-load.1029666/
Relevancy 110.94%

I have a basic hp deskjet d1660. The file downloads fine, extracts and nothing. Ran Combofix, it found infections and resolved but I still can not load my printer. I have tried manually also with no results. I am running Windows 7 64-bit on a gateway laptop. Plenty of memory on this computer. I have an espon scanner installed no prob and the printer is loaded on 2 other laptops no problem.
Thank for any help.
 
Kim

A:Windows doesn't load printer driver

Combofix should be used as part of a malware removal process, not as a standalone tool. The probability that you are still infected with malware is extremely high.
 
I suggest you follow this guide to create a malware removal thread.
 
TsVk!

http://www.bleepingcomputer.com/forums/t/560226/windows-doesnt-load-printer-driver/
Relevancy 106.21%

hi,
Windows can`t load my network adapter (Atheros AR8121, integrated on motherboard ) driver after last thunderstorm.
The router went dead, and was replaced with a new one.
I`ve tried reinstalling the driver, resetting BIOS , and still no change;

can anybody help me, please?
thanks!

A:windows can`t load network adapter driver after a thunder

Uninstall the card in Devices, reboot and see if Windows finds the adapter. If not you could pick up a USB wifi dongle on the cheap...

http://www.eightforums.com/drivers-hardware/67696-windows-can-t-load-network-adapter-driver-after-thunder.html
Relevancy 103.63%

I am having problems getting a printer driver to load.

I started having problems printing. The pages filled with garbage figured it was the driver so I uninstalled the driver now I can't get driver to reload. The install program runs and acts ok but never adds printer to printer folder.
I have tried to run add printer but it just can't find a driver even when I tell it I have a disk.

The printer is a HP DeskJet 1120C
I am running windows 2000

Thanks

 

A:Printer driver won't load

Are you sure you go through add printer with that particular model. If it's a part of the c series you usually just remove all the old software through control panel - add/remove, Reboot and use your CD software or disks??, and install the software. You don't have to add printer and run software.
Go back into add printer and remove everything but add printer icon, make sure you delete all your software for the printer and reinstall the software. It should acknowledge the printer on Reboot all by itself. We hope...Let us know...Jazz
 

https://forums.techguy.org/threads/printer-driver-wont-load.645740/
Relevancy 103.63%

I'm using XP-SP3 on a e-machine desk-top with 3.2Ghz processor and 1405mb ram. I had to delete the lexmark printer driver because it disappeared from this computer. I put in the original disc and started to re-load it, when a message came up that said the processor speed does not meet minimum requirements. It said it needed 800 mhz and I only have 4294967295 mhz(no decimals), and cannot load.
Anyone know what's going on?
 

https://forums.techguy.org/threads/cannot-re-load-printer-driver.1083882/
Relevancy 103.63%

I bought my mom a printer for her quot new quot computer It was given to her by another family member so it is not fresh from the factory Her computer is printer driver get to load Can't a Dell mini-tower with a P ghz ram and XP SP It has four USB ports I Can't get printer driver to load purchased the Canon iP printer Followed the installation directions to run the CD and then connect the USB cable and turn on the printer It would not recognize the printer was Can't get printer driver to load connected I tried all of the USB ports and had no luck I bought a new USB mouse and it readily worked in the USB ports I downloaded the latest drivers from the Canon site When I ran it it recognized the printer was connected but stated that it could not install the driver due to a data error Restarts did not change the results I don t know if it means anything but when I tried to manually select the correct port the printer was attached to it only offered the parallel and serial ports not the USB ports Is there something simple I am missing nbsp

A:Can't get printer driver to load

Run msconfig and select "launch system restore"

Select "create restore point"; name it anything you like. Then do a test restore to it. If the restore completes successfully, follow the rest of these instructions.

You want to remove and reinstall all present and "non present" USB devices. To do that follow the insturctions in this post:

http://forums.techguy.org/3435808-post2.html

Windows will normally reinstall these devices on reboot without any interaction from you.

However I've seen a few cases where this doesn't happen, and it may be at the root of your problems.

If you get prompted for a location to reinstall drivers from, point it to the location:

c:\windows\INF

(this is a hidden folder)

Reboot a couple of times after this completes; then remove and reinstall your Printer Software. If you get any prompts for locations to reinstall drivers from that are not satisfied by the Canon CD or other Canon driver locations, also point it to c:\windows\INF
 

https://forums.techguy.org/threads/cant-get-printer-driver-to-load.459665/
Relevancy 103.63%

I make signs on a Roland plotter. I bought a new computer and it has home ver of XP. I try to load drivers for my plotter and it cannot find the file. I have successfully loaded the printer driver several times without difficulty on Win 95, 98, ME.

Any help would be appreciated.

Thanks

David Sangster

[email protected]

A:printer driver will not load in XP

Welcome to the board,

Check their website to see if they have released drivers specifically for XP. Like Win2k and NT, allot of the times drives must be custom made for XP, unlike the Win95,98,Me drivers where one size fits all. :D

http://www.techsupportforum.com/forums/f10/printer-driver-will-not-load-in-xp-2179.html
Relevancy 103.63%

I was given an old hp deskjet c printer I went to hp website and d l the driver on my newer computer and burned it on a disk I m trying to install it on an old IBM computer running Win Can t get driver load not Printer will on the net with it It does not recognise and try to install it when I Printer driver will not load boot Normally all I do is put the CD in the drive click on the icon for the driver I want to install and it installs When I do that for this driver a box pops up that says it cannot Printer driver will not load create directory When I click OK it comes right back again I keep clicking OK and I can see on the install box behind this error box that it is extracting the files A blue line is moving across the install box Every time I click OK it moves a little Printer driver will not load farther When it reaches both boxes disappear I got the printer to work by installing the highest number deskjet listed in the Add New Hardware box c but I would like to have the right driver installed The driver that Windows is installing is prob and the one I d l is I went back to HP website but couldn t find anything specific I thought I might be able to update the driver after installing what Windows had but I still had the same prob Would appreciate any help nbsp

Relevancy 102.77%

Hello all I'm at a loss I am unable to get driver printer to Unable load my Epson WF printer drive to load It appears to be able to load the fax and scanner but not the printer It was working a month ago and I've tried to delete it and reload I've even wanted to reset my computer to new to see if this works Unable to load printer driver but have now found that I can't even access a lot of my 'settings' such as the firewall backup and restore just to name a few I saw a post here of the same problem getting an error of x eb and changed the file to old Maybe I just don't understand how to stop and start the spooler I also get errors that my file couldn't be located but when I go to the address it 'couldn't find' it's right there Any ideas nbsp I hate to think I'll have to buy another computer with this problem nbsp Thank you

https://social.technet.microsoft.com/Forums/en-US/943cb7ae-d93c-48f3-8194-24571cbd657f/unable-to-load-printer-driver?forum=w7itprogeneral
Relevancy 102.77%

I need to download a Postscript Printer Driver to enable me to create PDF files from Pagemaker 7 files. Downloads from the Adobe website do not load - I get a message box: Severe X. Have wasted a lot of time on this - any suggestions?

A:Postscript Printer Driver will not load

I need to download a Postscript Printer Driver to enable me to create PDF files from Pagemaker 7 files. Downloads from the Adobe website will not load. Have wasted a lot of time on this - any suggestions?

http://www.tenforums.com/drivers-hardware/43611-postscript-printer-driver-will-not-load.html
Relevancy 102.77%

Got an HP 970cxi printer and running Windows 2000.

We have had this printer running just fine for over a year until we had to have it (the printer) serviced. We used the computer every day for the week while the printer was gone and when we reconnected it just a few days ago, the "New Hardware Found" wizard popped up after turning the computer on. Mind you, we didn't unload or reload the driver. We just disconnected the printer for a week and reconnected it again.

We have gone through the HP Uninstall process and removed the printer and all other printers and reinstalled the driver in an effort to remedy this annoying start-up of the "New Hardware Found" wizard popping up every time the computer starts; but, nothing helps.

It prints just fine; we just want to stop the annoyance.
 

Relevancy 102.34%

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this???
Any help is greatly appreciated
 

https://forums.techguy.org/threads/windows-cannot-load-the-device-driver-for-this-hardware-the-driver-may-be-corrupted.847642/
Relevancy 102.34%

Please help me. For both of my cd/dvd rom drives I get the following error: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Click Troubleshoot to start the troubleshooter for this device. How can I fix this?

Any help is greatly appreciated,

thisismyuser
 

A:Solved: Windows cannot load the device driver for this hardware. The driver may be co

https://forums.techguy.org/threads/solved-windows-cannot-load-the-device-driver-for-this-hardware-the-driver-may-be-co.177987/
Relevancy 102.34%

Hello everyone, I'm new here and after searching without finding i am asking for your help.
I have just updated from Me to Xp update install,all is working fine except the sound card drivers won't load and in the device manager it says
'Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.next to my 'Creative Audigy Audio Processor(WDM)
My system is:

a7v8x-x asus MB
amd sempron 2500+ socket A processor
audigy platinum ex
512 MB RAM
I have updated the MB and the Processer Bios,I have installed sp2for XP,
I have tried to follow 'instructions' from Creative Support etc.
I really need some advice.
Thanks
Kurt
 

A:Windows cannot load the device driver for this hardware. The driver may be corrupted

Go to the sound card makers web site and DN the latest XP drivers.
 

https://forums.techguy.org/threads/windows-cannot-load-the-device-driver-for-this-hardware-the-driver-may-be-corrupted.320273/
Relevancy 102.34%

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this??? I really need help to fix this
Any help is greatly appreciated
 

A:Windows cannot load the device driver for this hardware. The driver may be corrupted

https://forums.techguy.org/threads/windows-cannot-load-the-device-driver-for-this-hardware-the-driver-may-be-corrupted.847646/
Relevancy 102.34%

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) <-- This god for shaken message is stopping me from enjoying my computer.

The driver is MAT****A DVD-RAM UJ-861H ATA Device

And that up there is the error message, i havnt downloaded anything i just pressed the button on the cd/dvd drive and my computer shut down and when i turned it back on nothing it it worked.

Does anyone know how to fix this? Im practilly computer illiterate so please be easy on the big words and stuff =]

A:Windows cannot load the device driver for this hardware. The driver may be corrupted

Please try the steps below:

1. Uninstall all third-party burning software, such as Nero and Roxio.

2. Perform a Clean Boot to test the result.

Clean Boot

========
a. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.


Note: Please click Continue if the "User Account Control" window pops up.


b. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
c. Click the "Startup" tab, click "Disable All" and click "OK".
d. Restart the computer and test the issue.


Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".

Please test this issue in the Clean Boot environment. If the issue disappears, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.

If the issue persists, please contact your computer manufacturer to check if the DVD drive is damaged.

If not, you may need to restore the system to its factory settings.

Hope it helps.

http://www.vistax64.com/drivers/203723-windows-cannot-load-device-driver-hardware-driver-may-corrupted.html
Relevancy 100.62%

I have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.

https://social.technet.microsoft.com/Forums/en-US/6070b9bf-bb9a-4579-80aa-b64b1241a77c/windows-cannot-load-the-device-driver-for-this-hardware-because-a-previous-instance-of-the-device?forum=w8itprohardware
Relevancy 99.33%

Hi If anyone could please shed some light on this please it would be really helpful I am not getting too far in my attempts to resolve this so far I purchased a cable which converts USB to parallel and it claims that not SP3 USB home automatically Driver does in > Parallel cable. load XP on XP the installation is automatic as it used a built-in driver USB > Parallel cable. Driver does not automatically load in XP home SP3 Only problem is that it doesn t want to do that for me Instead when I plug in the cable the PC makes the usual quot dong-ding quot and it then tells me a new USB device has been detected and it opens up the wizard It does not seem to find what it is after The cable does work on a friends PC without any problem so the fault would seem to be with my hardware of software Hardware Advent GB ram Software Windows XP Home SP installed and auto updates are on More info at the bottom of the post from the TSGinfo program USB ports on the Advent can handle mA and other devices including webcam broadband dongle etc all work ok It is only the usb gt PP cable that fails I have found the file it apparently should be using - usbprint sys - and tried manually pointing the wizard at it - but I think it is wanting an inf instead Any guidance would be really helpful please Many thanks Guy PS I thought quot XP quot was a sensible tag but it is rejected as only two letters I put quot win xp quot instead but doubt too many folks would search for that Tech Support Guy System Info Utility version OS Version Microsoft Windows XP Home Edition Service Pack bit Processor Intel R Atom TM CPU N GHz x Family Model Stepping Processor Count RAM Mb Graphics Card Mobile Intel R Express Chipset Family Mb Hard Drives C Total - MB Free - MB Motherboard DIXONSXP Advent Antivirus AntiVir Desktop Updated Yes On-Demand Scanner Enabled nbsp

https://forums.techguy.org/threads/usb-parallel-cable-driver-does-not-automatically-load-in-xp-home-sp3.1040552/
Relevancy 98.04%

I reinstalled Windows XP home SP2 and now I can't load any printer driver unless it came on a disk. I'm trying to install an HP Deskjet 812c through USB. Part way through driver installation I get the message "Printer driver was not installed. Operation could not be completed." I've tried various other print drivers and get the same message. My Canon i560 installed without issue from the disk.

Any suggestions? It's making me CRAZY!

A:Windows XP Home won't load ANY print drivers

I need to reformat my sony vaio pc. I have the cd's - does anyone know where I need to begin? I put the 1st CD in and nothing is prompting me???????? Please help

http://www.techsupportforum.com/forums/f10/windows-xp-home-wont-load-any-print-drivers-186457.html
Relevancy 97.61%

Cleaned some malware (lots) of a laptop, Windows XP sp3, Dell Inspiron 6000, and things were finally looking good. Then, after last reboot, all network connections depending on tcp\ip dissappeared from network connections. IPSec Service had an event in the system log about not finding the specified file.

I've searched, and can't find a fix. ipsec.sys exists and is same attributes as another functioning PC, and the registry key for the ipsec service points to the right file. But the driver just won't load, with error message "cannot locate the specified file"

Tried to roll back to sp2, thinking maybe something would get reset, but that just caused BSOD in any configuration that loaded with networking enabled (all but plain safe-mode). Got sp3 restored back.

I don't require IPSec, but the TCPIP driver has it as a dependency to start.

Any help appreciated.
 

https://forums.techguy.org/threads/ipsec-driver-wont-load-killing-network.834523/
Relevancy 97.61%

.I reprogrammed my laptop Samsung with the model code NP-N102S-B02NG. so when I'm connecting my laptop to the wi-fi i cannot connect because it has no driver for Ethernet and Network Controller driver. so I waana ask how can I have those driver?
I need your help so that I can already use my laptop. thankyou

https://social.technet.microsoft.com/Forums/en-US/1325e3dc-3dcd-46ad-a467-fa734eb53aed/i-reprogrammed-my-laptop-samsung-with-the-model-code-npn102sb02ng-so-when-im-connecting-my?forum=w7itproinstall
Relevancy 96.75%

Hello nbsp I was deleting some old outlook files on my G to clear up some space I also deleted Ad-Aware so I could download the McAfee software I purchased After I downloaded McAfee the computer restarted and everything seemed fine until I tried to connect to my wireless network I made sure that my wireless was turned on F- but for some reason I can't connect to the internet I showed my computer to a friend who works as tech support for his company He believes I must have inadvertently deleted a network driver nbsp nbsp Network recovery and manager/de... not driver load missing does I've been doing research on how to download Network driver missing and does not load recovery manager/de... the driver I'm missing but now I Network driver missing and does not load recovery manager/de... can't even open up the Device Manager or Recovery Manager It could be due to the fact that my laptop is old and slow Either way I'm trying to figure out which problem needs to be fixed first or at all I'm debating whether or not I should even bother with this thing anymore nbsp nbsp Thanks in advance

http://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/Network-driver-missing-and-does-not-load-recovery-manager/td-p/5722406
Relevancy 96.32%

XP won t load driver for WLAN cardbus on laptop -May- PM - XP won t load driver for WLAN cardbus on laptop stacyanne Junior Member Posts Join Correga laptop won't WLAN load XP for driver on Date Jul Location UK Hello all I have been trying for many weeks now to get the Corega WCLB- card bus which XP won't load driver for Correga WLAN on laptop came with my laptop IBM ThinkPad A m It was imported for the USA to the UK When I first received the XP won't load driver for Correga WLAN on laptop laptop it had Win pro but this was not a fully legal copy so since I had a copy of Win XP Home Edition lying around I stuck it on it also with a dual boot with Mandrake Linux However I use the XP partition more for my learning needs so I have also installed Mb of RAM and everything is working fine The Corega WCLB worked great with Win pro however I did need to use another programme to bridge the connection which was a Motive based programme which was part of ASDL kit Since the major upgrade I have failed at every attempt to install the card I have tried all of the following Disabling the current Intel network driver whilst trying to install a new Realtek universal driver I have downloaded all the drivers and firmware off the Corega Home page but can not get the Add Hardware wizard to recognise the drivers or software Tried to change the IRQ of all the devices manually through the bios which worked but I could still not load the driver Apparently the cause of this is because the Card Bus is not recognised by XP because its driver does not support a shared PCI interrupt as it should in XP This probably explains why it worked so easily with Win There is a fix for this problem which involves adapting the HKR registry setting so that the specified INF file of the target device prevents Pcmcia sys from routing that device to a shared IRQ The instructions follow HKR PcmciaExclusiveIrq x To be honest I find this all a bit too much to understand and I am not completely sure it would be the correct solution to my problem I would be most grateful if anyone could help me find a solution to this problem without making changes to the current PCMCIA card or HD which I am thinking of at the moment and then making a clean installation Quote Quick Reply stacyanne View Public Profile Send a private message to stacyanne Send email to stacyanne Find all posts by stacyanne Add stacyanne to Your Buddy List -May- PM ozrom e Distinguished Member Posts Join Date May Experience Advanced Welcome to TSG When you installed the Windows XP Home was this an upgrade from Windows or a clean install Also some other system Specs would be great including any service pack levels I was always taught to respect my elders but it keeps getting harder to find one Heaven goes by favorites If it didn t then your dog would get in first Amen Quote Quick Reply ozrom e View Public Profile Send a private message to ozrom e Visit ozrom e s homepage Find all posts by ozrom e Add ozrom e to Your Buddy List Computer Specifications Compaq Presario Athlon Gb Ram - Gb Hard drives Windows XP Professional Service Pack DSL DVD CD-R Burners -May- PM stacyanne Junior Member Posts Join Date Jul Location UK Quote Originally Posted by ozrom e Welcome to TSG When you installed the Windows XP Home was this an upgrade from Windows or a clean install Also some other system Specs would be great including any service pack levels Sorry about that I got carried away but please let me know what else you need if you don t find enough here It s an IBM A m laptop with mbRAM and P Mhz gb HD Win XP Home Edition but it was a fresh install of the CD and I have downloaded the sp updates and all the latest service packs The PCMCIA uses Texas Instruments PCI- Card Bus controller with the XP driver And the Wireless LAN card is Corega WCLB- M pc card The drivers I have tried for the adapters are the Corega CO PCX driver in the PCC-TXD download also the Realtek RtWLan UI v The firmware for the device was wclb- v download The ca... Read more

A:XP won't load driver for Correga WLAN on laptop

Closing duplicate, please reply here:

http://forums.techguy.org/windows-nt-2000-xp/575459-xp-wont-load-driver-wlan.html

eddie
 

https://forums.techguy.org/threads/xp-wont-load-driver-for-correga-wlan-on-laptop.576156/
Relevancy 96.32%

Hello all I have been trying for many weeks now to get the Corega WCLB- card bus which came with my laptop IBM ThinkPad A m It was imported for the USA to the UK When I first received the laptop it had Win pro but this was not a fully legal copy so since I had a copy of Win XP Home Edition lying around I stuck it won't driver cardbus laptop XP load WLAN for on on it also with a dual boot with Mandrake Linux However I use the XP partition more for my learning needs so I have also installed Mb of RAM and everything is XP won't load driver for WLAN cardbus on laptop working fine The Corega WCLB worked great with Win pro however I did need to use another programme to bridge the connection which was a Motive based programme which was part of ASDL kit Since the major upgrade I have failed at every attempt to install the card I have tried all of the following Disabling the current Intel network driver whilst trying to install a new Realtek universal driver I have downloaded all the drivers and firmware off the Corega Home page but can not get the Add Hardware wizard to recognise the drivers or software Tried to change the IRQ of all the devices manually through the bios which worked but I could still not load the driver Apparently the cause of this is because the Card Bus is not recognised by XP because its driver does not support a shared PCI interrupt as it should in XP This probably explains why it worked so easily with Win There is a fix for this problem which involves adapting the HKR registry setting so that the specified INF file of the target device prevents Pcmcia sys from routing that device to a shared IRQ The instructions follow HKR PcmciaExclusiveIrq x To be honest I find this all a bit too much to understand and I am not completely sure it would be the correct solution to my problem I would be most grateful if anyone could help me find a solution to this problem without making changes to the current PCMCIA card or HD which I am thinking of at the moment and then making a clean installation nbsp

Relevancy 95.89%

My partner has bought a new Acer Aspire laptop with Windows 7 o/s. When I try to load the Belkin Wireless driver for the Print Server I get the message AddMonitor() failed: Error = 1805.
The driver works OK with XP and Vista.....................is there (or will there be) an updated version that is compatible with Windows 7?

Thanks,
tictoc
 

A:Where can I get Windows 7 Compatible Driver for Belkin Wireless Print Server F1UP0001

https://forums.techguy.org/threads/where-can-i-get-windows-7-compatible-driver-for-belkin-wireless-print-server-f1up0001.906673/
Relevancy 95.89%

Hya all i have upgraded windows 8pro and Rt to 8.1pro and 8.1RT everything went smoothly and is running very well however there does seem to be a problem with the Hyper V-networking miniport Default adapter driver Which states it cannot load and
gives me an error 39 Now from what ive read this is a very sensitive drive that could have been corrupted when i upgraded from the previous os but as yet i havnt found any solutions to the problem, can someone please help me to resolve this issue and or has
microsoft updated the driver for this device, any thoughts would be gratefully recieved.

A:Hyper V -Network miniport adapter driver cannot load error 39

Hi,
Generally speaking, the error code 39 means Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. You can try to reinstall it for test.
To add a network adapter in Hyper-v, I would like to refer to the link below for more details.
Configure Networking :
http://technet.microsoft.com/en-us/library/cc770380.aspxRoger Lu
TechNet Community Support

https://social.technet.microsoft.com/Forums/en-US/81dfb82a-3dce-4bd5-8d90-74cc44b1b79d/hyper-v-network-miniport-adapter-driver-cannot-load-error-39?forum=w8itprogeneral
Relevancy 95.03%

I've had a few problems with this laptop and I've just about had it The laptop restarts on its own gives a few dll errors and when I try to get a RootRepeal scan to post it gave me an error that it couldn't load my driver I'm also having a problem installing Windows Updates I troubleshooted it according to Cannot Own. Restarts Driver? Root Repeal On Laptop Load Windows Help and it still didn't help DDS Laptop Restarts On Own. Root Repeal Cannot Load Driver? Ver - - - NTFSx Run Laptop Restarts On Own. Root Repeal Cannot Load Driver? by repoman at on Sun Internet Explorer Microsoft Windows Vista Home Premium GMT - AV AVG Anti-Virus Free On-access scanning enabled Updated DDD - FF- F- E B- D D BF SP AVG Anti-Virus Free enabled Updated DDD - FF- F- E B- D D BF SP Spybot - Search and Destroy disabled Updated ED FAF- B F- B -ACA - E C DADBE SP Windows Defender enabled Updated D DDC A- F- FAE- E -DA C ACF Running Processes C Windows system wininit exeC Windows system lsm exeC Windows system svchost exe -k DcomLaunchC Windows system svchost exe -k rpcssC Windows System svchost Laptop Restarts On Own. Root Repeal Cannot Load Driver? exe -k LocalServiceNetworkRestrictedC Windows System svchost exe -k LocalSystemNetworkRestrictedC Windows system svchost exe -k netsvcsC Windows system SLsvc exeC Windows system svchost exe -k LocalServiceC Windows system svchost exe -k NetworkServiceC Windows System spoolsv exeC Windows system svchost exe -k LocalServiceNoNetworkC Program Files Intel Intel Matrix Storage Manager Iaantmon exeC Program Files Common Files LightScribe LSSrvc exeC Acer Mobility Center MobilityService exeC Windows System svchost exe -k HPZ C Windows system svchost exe -k NetworkServiceNetworkRestrictedC Program Files CyberLink Shared Files RichVideo exeC Windows system svchost exe -k imgsvcC Windows System svchost exe -k WerSvcGroupC Windows system DRIVERS xaudio exeC Windows system taskeng exeC Windows system taskeng exeC Windows system Dwm exeC Windows RtHDVCpl exeC Program Files Synaptics SynTP SynTPEnh exeC Program Files Intel Intel Matrix Storage Manager IAAnotif exeC Program Files CyberLink PowerDVD PDVDServ exeC Program Files Launch Manager LManager exeC Users repoman AppData Local Temp RtkBtMnt exeC Program Files Common Files InstallShield UpdateService issch exeC Windows System igfxtray exeC Windows System igfxpers exeC Program Files MyWebSearch bar bin MWSOEMON EXEC Windows system igfxsrvc exeC Program Files GamingSquared Gaming G exeC Program Files Windows Sidebar sidebar exeC Program Files Google GoogleToolbarNotifier GoogleToolbarNotifier exeC Windows system igfxext exeC Program Files Windows Media Player wmpnscfg exeC Program Files Windows Media Player wmpnetwk exeC Windows system wuauclt exeC Windows system igfxsrvc exeC Program Files Yahoo Messenger ymsgr tray exeC Windows WindowsMobile wmdcBase exeC Windows system svchost exe -k WindowsMobileC Program Files Windows Defender MSASCui exeC Windows System svchost exe -k secsvcsC Program Files Java jre bin jusched exeC Program Files Common Files Microsoft Shared Windows Live WLIDSVC EXEC Program Files Common Files Microsoft Shared Windows Live WLIDSvcM exeC Windows explorer exeC Program Files Microsoft Search Enhancement Pack SeaPort SeaPort exeC Windows system SearchIndexer exeC Program Files Windows Live Messenger msnmsgr exeC Program Files Common Files Intel WirelessCommon RegSrvc exeC Windows system WLANExt exeC Program Files Intel WiFi bin EvtEng exeC Windows system wbem wmiprvse exeC PROGRA AVG AVG avgwdsvc exeC PROGRA AVG AVG avgrsx exeC Program Files AVG AVG avgcsrvx exeC Program Files AVG AVG avgtray exeC PROGRA AVG AVG avgnsx exeC Program Files Spybot - Search amp Destroy SpybotSD exeC Windows system SearchProtocolHost exeC Windows system SearchFilterHost exeC Users repoman Desktop dds scrC Windows system wbem wmiprvse exe Pseudo HJT Report uSearch Page uStart Page hxxp www yahoo com uSearch Bar mStart Page hxxp www yahoo com mDefault Page URL hxxp www yaho... Read more

A:Laptop Restarts On Own. Root Repeal Cannot Load Driver?

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructions that pop up for posting the results.Close the program window, and delete the program from your desktop.Please note: You may have to disable any script protection running if the scan fails to run. After downloading the tool, disconnect from the internet and disable all antivirus protection. Run the scan, enable your A/V and reconnect to the internet. Information on A/V control HERE

http://www.bleepingcomputer.com/forums/t/255579/laptop-restarts-on-own-root-repeal-cannot-load-driver/
Relevancy 94.6%

Greetings amp a happy new year My issue as per thread heading The strange thing is when I'm on other networks i e at the in-laws house etc youtube loads and plays just fine so I'm assuming it's not my laptop software network on connected when won't home my laptop Youtube site load to browser etc To my untrained eye Youtube site won't load on laptop when connected to my home network brain not a tech geek it seems as there is a problem between my home network and my lappy laptop connected via wifi or ethernet cable As stated if I'm at the in-laws it youtube works just fine Also my desktop on my home network can access youtube w o any problems I'm really flumixed as to why this is happening Other sites that play cough cough movies work just fine it's just youtube for some reason amp only on my lappy when connected to my home network According to my AV Kapersky the lappy is free from virus Please advise PS - It hasn't always been this way but I've put up with it for so long - I can't actually remember when it first started happening

A:Youtube site won't load on laptop when connected to my home network

Hi there,

You may try changing the DNS settings from your LAN or/and WLAN settings and use the Google DNS'es.
https://developers.google.com/speed/...dns/docs/using

http://www.sevenforums.com/browsers-mail/318905-youtube-site-wont-load-laptop-when-connected-my-home-network.html
Relevancy 94.6%

Okay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS listed in the bios normally but windows does not recognize it, I tried using Kaspersky Rescue disk(the only CD I had along with the recovery disk)and when I used the File Manager, the hard disk still didn't show, are there any drivers I have to install?I have burned both fujitsu
9that's my laptop) and Seagate's websites and can't find anything, I have searched forums but the only answers were
"check if your hd is listen in bios".So, it IS listed in bios but I can't reinstall windows nor access it, any suggestions?

A:No drivers found. click load driver to provide a mass storage driver f

Nevermind, I sent my laptop to a technician and he told me I burnt the hard drive by destroying some cables while cleaning with compressed air.

http://www.sevenforums.com/hardware-devices/272700-no-drivers-found-click-load-driver-provide-mass-storage-driver-f.html
Relevancy 94.6%

Hi there I'm in a desperate need of help This is the situation sorry for my bad English as always Yesterday I left my PC running with a download in progress through MiPony I told the program MiPony for the first time to shut down the PC at the end of the download Until then the PC had no problem Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan the only letter I saw was I but I could not stop it The PC failed driver to device \Driver\WUDFRd ROOT\PARAGONBL load for the The is The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL turned on regularly Only half an hour later I found out that an entire TB HDD in partitions had disappearedI did some search and found this error The driver Driver WUDFRd failed to load for the device ROOT PARAGONBLOCKDEVICE I tried to reboot but same situation no scan and normal situation but NO drive I checked the event log attached and I see the problem started after different event regarding The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL my network connection It's a week that I have to reset the modem router several times a day Event Log Name System Source e iexpress Date - - T Event ID Task N A Level Warning Opcode N A Keyword Classic User N A User Name N A Computer Lio-BigBear Description Intel R V Gigabit Network Connection Network link is disconnected Event Log Name System Source e iexpress Date - - T Event ID Task N A Level Information Opcode N A Keyword Classic User N A User Name N A Computer Lio-BigBear Description Intel R V Gigabit Network Connection Network link has been established at Gbps full duplex Event Log Name System Source Microsoft-Windows-DNS-Client Date - - T Event ID Task N A Level Warning Opcode Info Keyword N A User S- - - User Name NT AUTHORITY NETWORK SERVICE Computer Lio-BigBear Description Name resolution for the name by storage live com timed out after none of the configured DNS servers responded Event Log Name System Source Service Control Manager Date - - T Event ID Task N A Level Information Opcode N A Keyword Classic User S- - - User Name NT AUTHORITY SYSTEM Computer Lio-BigBear Description The start type of the Background Intelligent Transfer Service service was changed from demand start to auto start Event Log Name System Source Service Control Manager Date - - T Event ID Task N A Level Information Opcode N A Keyword Classic User S- - - User Name NT AUTHORITY SYSTEM Computer Lio-BigBear Description The start type of the Background Intelligent Transfer Service service was changed from auto start to demand start Event Log Name System Source Service Control Manager Date - - T Event ID Task N A Level Information Opcode N A Keyword Classic User S- - - User Name NT AUTHORITY SYSTEM Computer Lio-BigBear Description The start type of the Background Intelligent Transfer Service service was changed from demand start to auto start And here you go with the disk error Event Log Name System Source disk Date - - T Event ID Task N A Level Error Opcode N A Keyword Classic User N A User Name N A Computer Lio-BigBear Description The device Device Harddisk DR has a bad block Event Log Name System Source disk Date - - T Event ID Task N A Level Error Opcode N A Keyword Classic User N A User Name N A Computer Lio-BigBear Description The device Device Harddisk DR has a bad block Event Log Name System Source disk Date - - T Event ID Task N A Level Error Opcode N A Keyword Classic User N A User Name N A Computer Lio-BigBear Description The device Device Harddisk DR has a bad block Event Log Name System Source disk Date - - T Event ID Task N A Level Error Opcode N A Keyword Classic User N A User Name N A Computer Lio-BigBear Description The device Device Harddisk DR has a bad block Event Log Name System Source storahci Date - - T Event ID Task N A Level Warning Opcode N A Keyword Classic User N A User Name N A Computer Lio-BigBear Description Reset to device D... Read more

A:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

http://www.tenforums.com/bsod-crashes-debugging/35422-driver-driver-wudfrd-failed-load-device-root-paragonbl.html
Relevancy 94.17%

emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found. click load driver to provide a mass storage driver for installation. any healp well be highly appreciated. many thanks!!!
 

A:no drives were found. click load driver to provide a mass storage driver for installa

Is your drive listed in BIOS? It could be a hard drive failure. No drivers should be needed for Windows 7.
 

https://forums.techguy.org/threads/no-drives-were-found-click-load-driver-to-provide-a-mass-storage-driver-for-installa.1029906/
Relevancy 94.17%

Hi all I have a Dell M XPS and what a drives load provide to Click driver mass a driver o found. storage installation were nightmare I am having installing Windows on it o drives were found. Click load driver to provide a mass storage driver installation I go to install and get hit by this message quot No Drives were o drives were found. Click load driver to provide a mass storage driver installation found Click Load Driver to provide a mass storage driver for installation quot When I click next nothing happens I have the to cancel the installation I have tried pressing F to bring up the setup menu but do not know what to do from there I have had a brand new motherboard fitted from dell and now unsure what model I have now Using Belerc Advisor this is what it says about my system any help would be great Processor a gigahertz Intel Core Duo kilobyte primary memory cache kilobyte secondary memory cache -bit ready Multi-core total Not hyper-threaded Drives Gigabytes Usable Hard o drives were found. Click load driver to provide a mass storage driver installation Drive Capacity Gigabytes Hard Drive Free Space TEAC DVD -RW DVW SLC ATA Device CD-ROM drive Ricoh MMC Disk Device GB -- drive s n nbsp

A:o drives were found. Click load driver to provide a mass storage driver installation

Hi there

Some problems I had and that also BSOD alot was that the hard disc compability mode was set wrongly, if so you would not see the discs.

Check in bios for somwthing like "AHCI" mode and "Compability" mode.

Put it to compability as otherwise special drivers are neededm ones added you can swap this back to get more speed.
Regards

Ambrose...
 

https://forums.techguy.org/threads/o-drives-were-found-click-load-driver-to-provide-a-mass-storage-driver-installation.908867/
Relevancy 94.17%

Hey, I'm trying to install a new copy of Windows Vista on my desktop. I get this message "NO drives were found.Click load driver to provide a mass storage driver for installai" right after the installation step of "which type of installation do you want?" I select Custom because Upgrade isnt bold so i'm not allowed to click it.

I have a HP Pavilion Slimline s3713w
Sn:3CR847138P
64bit

A:NO drives were found.Click load driver to provide a mass storage driver for installai

Hi -

Is this your system? --> http://h10025.www1.hp.com/ewfrf/wc/s...=3870526#N1740

If link does not work, paste this into web browser address bar -

Code:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3870526#N1740

I don't see XP listed as an OS for it. What OS came pre-installed?

Is the copy of Vista a full retail copy? If so, back up any files you need and wipe the HDD with KillDisk. Then try Vista installation again.

KillDisk --> http://jcgriff2.com/killdisk_imgburn.html

Regards. . .

jcgriff2

.

http://www.techsupportforum.com/forums/f217/no-drives-were-found-click-load-driver-to-provide-a-mass-storage-driver-for-installai-493343.html
Relevancy 94.17%

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

A:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

http://www.sevenforums.com/bsod-help-support/344379-driver-driver-wudfrd-failed-load-device-error.html
Relevancy 94.17%

Hi Since the event viewer Event ID Task Category has been posting a warning The driver Driver WUDFRd failed to load for the device WpdBusEnumRoot UMB amp driver load \Driver\WUDFRd for The failed error the device... to c b amp amp STORAGE VOLUME USBSTOR DISK amp VEN followed by name of USB device It only occurs on start up if I have a USB memory device plugged into a USB port The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up The driver \Driver\WUDFRd failed to load for the device... error The error only occurs for memory devices like memory sticks external USB hard drive does not cause this error Checking back to around the I see nothing that I have changed installed that might indicate something that has caused this No other Windows failures or issues Booting a second hard drive with windows on the same system I have this second installation for testing faults etc the issue does NOT occur From checking forums and searching I have found a few others with this issue and a few articles on its cause WUDFRd failed to load for the device Event ID is logged after you install Windows or Windows Server R I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date Also I wondered if there was a fix to stop this other than removing a memory stick before boot up Any thoughts

A:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

http://www.sevenforums.com/drivers/268212-driver-driver-wudfrd-failed-load-device-error.html
Relevancy 94.17%

I was looking at my system logs today and found an error that is being repeated quite a lot and I would like to get rid of the darned error.

The error in the applications event loge is TrueVector Service, event 5003. The message in the event says:

TrueVector driver: Driver install or load failure: LoadNTDeviceDriver. Win32 error: The system cannot find the file specified.

I checked on the Internet and have found numerous resources indicating that TrueVector is a part of zone alarm. The weird part is that I have never had zone alarm or any other firewall installed -- Note even Microsft's within XP SP2. I have no references to Zone Alarm in my registry. My references to TrueVetor are in My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application\TrueVector Service

Can someone suggest any soluton to getting rid of this event?
 

Relevancy 94.17%

This has been a problem for over a year now identical PCs running identical images with identical keyboards Some have the problem some do not and it's incredibly unpredictable PCs are HP Compaq Elite SFF running Windows x driver The ideas Out \Driver\kbdhid for failed the load device of to - Professional People will be working at their PC hear the USB disconnect sound and their keyboard will become unusable for seconds An Event with ID is created in the Event Log Log Name System Source Microsoft-Windows-Kernel-PnP Date - - T Out of ideas - The driver \Driver\kbdhid failed to load for the device Event ID Task N A Level Warning Opcode Info Out of ideas - The driver \Driver\kbdhid failed to load for the device Keyword N A User xxxxx User Name NT AUTHORITY SYSTEM Computer xxxxx Description The driver Driver kbdhid failed to load for the device HID VID F amp PID amp c d amp amp For those affected the frequency of the error runs anywhere from times a day to once every few weeks Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem The system I use has not experienced the problem once in over a year I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error It seemed to resolve it for a few months and then the errors inexplicably came back I've tried replacing the keyboards with completely different models Again it seemed to resolve it for a while and then it came back Moving the keyboard to different physical ports has no effect Turning off USB power saving has no effect The mouse never has a similar issue I have not been able to recreate the issue with the default factory image from HP but aside from all the pre-installed garbage that image cannot be used with our license to image through WDS It is also not practical to determine if the problem actually does not exist in their image or if it is one of the many cases where the problem is just not occurring Many times I've thought I've had a resolution to the problem only to have it come back weeks later HP support has been no help since we can't point to the issue happening with their image The keyboard shows in Device Manager as quot HID Keyboard Device quot using the driver files kbdclass sys and kbdhid sys Searching Google shows many other people experiencing the issue but not a single applicable solution Any suggestions

A:Out of ideas - The driver \Driver\kbdhid failed to load for the device

I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.

http://www.sevenforums.com/hardware-devices/330234-out-ideas-driver-driver-kbdhid-failed-load-device.html
Relevancy 92.88%

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

A:The driver \Driver\WUDFRd failed to load for the device

anyone?

http://www.eightforums.com/drivers-hardware/66965-driver-driver-wudfrd-failed-load-device.html
Relevancy 92.88%

I have this computer what for some reasons wont install USB Smartcard readers.
Its Win7 64.
I have tried different smartcards but they wont help, also i tried to install drives manually but still wont work. I uninstalled and installed drivers many times.

Also i tried, but didnt work:
Change the 'Windows Driver Foundation - User-Mode Driver Framework' from 'Manual' to 'Automatic'.

Also the error from events.
http://i.imgur.com/hP7Mu3L.jpg

I found something like this.
https://svn.eesti.ee/projektid/idkaa...r/atrfiltr.inx

Should i try it or would it be easier to just format the computer. Its a work pc and it wont take long time, there isnt that much stuff on it.

A:The driver \Driver\atrfiltr failed to load for the device...

Update Chipset and USB controller Driver.
It would be helpful if you can send us a screenshot of Device Manage while Card reader is connected.

http://www.sevenforums.com/drivers/367645-driver-driver-atrfiltr-failed-load-device.html
Relevancy 92.88%

At Windows startup the The ....... for \Driver\WudfRd device failed to driver load this Warning appears in my Event Log as Event ID The driver Driver WudfRd failed to load for the device SWD WPDBUSENUM a c The driver \Driver\WudfRd failed to load for the device ....... b - b - e - c - e f e I know why this happens The device in the message is an internal SATA AHCI hard drive All AHCI drives even internal ones are considered removal or hot swapable It even causes the safely remove icon to appear sort of like it was a USB drive It happened on Windows x Don't remember if it happened on Windows I can't make any changes in my BIOS to make it not hot swapable as there is no option for this drive The fix to get rid of the message in W was to modify the Service 'Windows Driver Foundation - User-mode Driver Framework' Changing the Startup type from Manual to Automatic fixed the problem However on Windows this method does not work I can't disable the Service as it's needed for other devices Just wondering if anyone found a nice clean way to get rid of the warning message like in W

A:The driver \Driver\WudfRd failed to load for the device .......

I have the same issue. I have upgraded from Win 7 home, had some issues so I did a clean install of Win 10 home, and I also tried changing the Windows Driver Foundation - User Mode Driver Framework from manual to auto and same as you it did not work. And, Yes, I have downloaded and installed all of the latest driver/firmware from my manufacturer for all my hardware but still have this issue.

http://www.tenforums.com/drivers-hardware/13586-driver-driver-wudfrd-failed-load-device.html
Relevancy 92.88%

Full event error: The driver \Driver\WUDFRd failed to load for the device {C5A047D8-CB5B-40E9-B9E3-316AB06B5A18}\WirelessKeyboardFilter`

Driver environment:
Windows 10 x64 desktop
I have a wireless Microsoft mouse
I do not have a Microsoft wireless keyboard
I have the associated transceiver that should work for both (if installed)

This problem started when my Microsoft wireless mouse driver was updated to version 1.0.102.0 (dated 3/16/2016).
This driver update also appears to be responsible for a few other device errors as well:

I believe this new driver assumes you have a wireless keyboard (without checking) and just tries to load a driver for it.

My temporary fix is/was to rollback the driver to the previous Microsoft version 10.0.10586.0 (dated 6/21/2006):

Anyone else run across this condition or have a known solution using the latest driver?

Thanks,

aardvark

http://www.tenforums.com/drivers-hardware/57438-driver-driver-wudfrd-failed-load-device.html
Relevancy 92.88%

Apparently I am one of many who seem to be having this issue And just like everybody else I turned to Google for some answers Here is my scenario perhaps gregrocker could point me in the right direction I am running on a laptop with the following specs Dell Studio -bit Vista Home Premium SP Intel Core Duo T GHz GB SATA HDD RPM GBs of RAM ATI Mobility Radeon HD x Slot Load CD DVD Burner Dual Layer DVD -R Drive I downloaded the iso image of Windows through the software program at Penn State and burned it to a DVD When I restart my computer and boot off of the DVD drive I get Driver: HELP! Driver: Load Drive Required Device CD/DVD the Windows Installation interface As the setup begins I get an error message that says quot Load Driver quot across the top of the window and says quot A required CD DVD Drive Device Driver is missing quot I tried a few things to circumvent this issue I swapped out the installation CD with one of the CD's that came with my laptop that contains all of my device drivers It found one compatible driver for the ATA ATAPI Controller and despite selecting it and hitting next it didn't work I took the service tag from my laptop downloaded each and every driver that it's associated with burned it to an iso and swapped Load Driver: Required CD/DVD Drive Device Driver: HELP! THAT out when I tried to install Again nothing happened I mounted the iso onto an GB Cruzer and made a bootable flash drive Upon trying the install again I had the same problem I tried to burn the image again on another DVD-R and got the same problem I am completely out of options and have no idea what to do Ideas Any help would be appreciated

A:Load Driver: Required CD/DVD Drive Device Driver: HELP!

Try extracting the ISO to Vista desktop to run Setup from there.

You can locate the driver in Vista's Device Manager SATA controller Driver info tab.

The fact that it would duplicate the error for USB flash install sounds like a malfunction.

Try removing 2 gb of RAM.

Check BIOS version to see if you have the latest.

Checksum the HASH of the ISO you downloaded to confirm it here: http://www.mydigitallife.info/2009/0...vd-iso-images/

http://www.sevenforums.com/installation-setup/48340-load-driver-required-cd-dvd-drive-device-driver-help.html
Relevancy 92.02%

My PC sometimes takes ages to boot like it s looking for a missing driver - then it eventually times out and boots windows I go to the control panel list of hardware and there is a little exclamation to a trying Windows driver? load mark next to a quot Multimedia Audio Controller quot I produce music and there s three pieces of kit that may need one Now all my multimedia audio controllers drivers have loaded My Soundcard Midi interface The only one that Windows trying to load a driver? doesn t show up on the hardware list is a midi controller fader box thing But it works absolutely fine it is recognised in the USB Unplug Eject hardware thing in the systray and I Windows trying to load a driver? ve pointed to its driver when trying to update the one that Windows says is missing So I m certain it s not for the midi controller If I don t know what piece of kit the driver is missing for how can I update it Windows searches for one and hasn t got it and it doesn t give me a clue as to what it is I disable it but every time I boot it says quot Found new hardware quot and it looks for a driver I have re-installed soundcard drivers with latest version and still no luck One theory I have my motherboard comes with onboard sound could the computer be trying to load this or something nbsp

A:Windows trying to load a driver?

try running these programs and see if you see some hardware that is not listed in device manager
ram is freeware called EVEREST Home Edition v1.10 and can be downloaded from http://www.lavalys.com/index.php?page=product&view=1&subpage=5
or http://www.belarc.com
 

https://forums.techguy.org/threads/windows-trying-to-load-a-driver.311886/
Relevancy 91.16%

I get this message often and whenever I do, my Windows runs in slow motion The driver \Driver\WUDFRd failed to load for the device HID\VID_1B96&PID_0006&MI_01&Col02\8&1c39cefe&0&0001. What should I do?

A:The driver \Driver\WUDFRd failed to load

you ever resolve this?

http://www.sevenforums.com/hardware-devices/278712-driver-driver-wudfrd-failed-load.html
Relevancy 91.16%

I've got a program that loads a driver on-the-fly.





Can I do this via a command?

Is this dynamic driver loading dependent on the driver type?

I've seen sc can install services and .inf stuff, I wondered if I can emulate this voodoo

http://www.sevenforums.com/drivers/383137-cmd-load-driver-dependent-driver-type.html
Relevancy 91.16%

I have an older system, but it's a nice setup featuring Gigabytes EP45-UD3P, Q9550 CPU, 8gb DDR2 OCZ platinum, dual 1TB of Seagate hard drives, and EVGA GTX 295 graphics card.

I turn my machine off, and the machine refuses to display. I get to the windows colors screen in Win 7 Pro, and once it proceeds to load the desktop the screen goes black without a cursor, and that's where it stays.
This can be corrected by me reloading the Boot record when turning the system on, however upon powering the system off it does the same thing till I instigate another boot record repair.

I've replaced the hard drives, and CMOS battery. I tried starting the system in safe mode, and it loads fine. I then narrowed the issue down to Win 7 not loading the video driver on startup.

Does anyone know how to correct this issue?

Thank you.

http://www.sevenforums.com/graphic-cards/391319-windows-wont-load-my-gtx-295-driver-startup.html
Relevancy 91.16%

I'm new and need some help haha. I need to reinstall Windows 8 and it tells me that I need to load a driver before the install can begin. I have no idea how to do that or where to find the driver for my computer (HP ENVY m6 1125-dx). I know for a fact that its my hard disk driver... SATA driver? Anyways, thanks for the help in advance!!

A:Windows 8 Load Driver During Install Help!

"I know for a fact..."

What's the exact error message?
Is it "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now."
If so, see support.microsoft.com/kb/2755139 :

"A required CD/DVD drive device driver is missing" or "A media driver your computer needs is missing" error message when you try to install Windows by using a Windows installation DVD or ISO file

http://www.eightforums.com/drivers-hardware/21206-windows-8-load-driver-during-install-help.html
Relevancy 91.16%

After I upgrade from xp home to xp pro, my NIC does work. I try to uninstall and reinstall the driver, no joy. Please help me solve the problem.

NIC: Realtek 8139 family

Device Manager
windows can not load the device driver for this hardware. code31

A:Windows Can't Load Nic Driver. Code 31

Hi Welcome to BC. All you should have to do is go to the following site and download the correct driver and installit then reboot and hopefully it should workhttp://www.bebits.com/app/2116Good Luck

http://www.bleepingcomputer.com/forums/t/51362/windows-cant-load-nic-driver-code-31/
Relevancy 91.16%

I have an HP Pavillion machine won't sound driver load Windows that I bought used When I got it it was running Win-XP but I quot Windows won't load sound driver downgraded quot it by reformatting the drive and installing Win- SE I had a good reason Everything is fine except that I lost the sound The specifications for the machine on the HP web site identify the sound device as quot Realtek AC Audio quot The device manager does show a problem with the sound card and shows the following error message NTKERN VXD MMDEVLDR VXD device Loader s for this device could not load the device driver Code I realize that this is a very common problem and have done a lot of trolling around the net for information Based on what I ve learned I have checked all of the following to no avail Checked that I have the most recent available driver and that the file I downloaded is compatible with Win- SE Verified that I have the most recent version available for the BIOS The driver apparently needs Direct X ver- or later I have ver- c on the machine Ran the Windows System File Check utility to check for missing or damaged system files No problems found Verified that all of the driver files identified in the quot driver details quot list in the device manager are actually present on the system Removed and reinstalled the driver several times So what else is there left to try that I haven t thought of nbsp

Relevancy 91.16%

Hi Windows load won't in driver windows me ethernet networking message displays at boot quot Your network adapter FE C- Com LAN CardBus Fast Ethernet is not working properly quot The control panel Device Manager Network adapter FE - Com LAN ethernet driver won't load in windows me CardBus-Fast Ethernet Properties tab displays quot Device status This device is either not present not working properly or does not have all the drivers installed Code Try upgrading the device drivers for this device quot Re-installing the driver v copyfiles displays message quot the file addem txt was not found We manually load this file from c windows system Update Device Driver ethernet driver won't load in windows me Wizard displays quot Windows has finished installing an updated driver for your hardware device quot But on reboot the windows networking error message reappears The hardware is a gateway notebook Solo running Windows ME Until we attempted to install DSL we never used ethernet The ethernet driver was not preinstalled by Gateway this we had to do ourselves Also the ethernet port came plugged with a lid which had to be pried out What s up Thanks -dovidls nbsp

A:ethernet driver won't load in windows me

Hi There!

Try booting into Safe Mode and go into device manager.

Remove the network adapter and all of the PCMCIA and card services.

Reboot to normal mode and windows should reinstall the card services and then the nic. It should work after that!
Good Luck!

ST
 

https://forums.techguy.org/threads/ethernet-driver-wont-load-in-windows-me.108012/
Relevancy 90.3%

I need help i know a bit more than the average person about computers and i can 10 update windows after driver wont load usually resolve my computer issues on my own but im stumped nbsp the windows 10 wont load after driver update first time i had an issue was a couple months ago when amd prompted me to update my graphics driver so i did after updating nbsp i restarted the computer and i would get to the windows loading screen then nbsp a black screen with just the loading ring shownig i restarted the machine a few times asnd got the same thing nbsp so eventually i got to the startup repair screen and i used system restore to bring the computer back to the point before i installed the new driver after that it worked fine for a few months nbsp nbsp just last week i had the same issue with the black loading screen so i did a system restore again andt windows loaded fine after that until the screen went to sleep then it refused to come back on and would not boot up again i had not updated the graphis driver so im not sure what caused it this time nbsp and since then thats what has been happening i have tryed restarting it time after time and it will eather freeze at the black loading screen or will nbsp boot into windows very slowly then crash again nbsp i have also tryed system restore a few more times and it just boots up once then crashes again nbsp i have even tryed repalcing the hard drive and putting a fresh windows install on it and it but nbsp just does the same thing again nbsp the strangest thing for me is that it seems to work just fine with linux ubuntu or windows but it will not work with windows nbsp the laptop is only a couple years old and it came with windows and i know it is able to run windows becuse it did just fine for at-least months before all this started nbsp im out of ideas if anyone can think of any reason this might have happened please let me know nbsp im sorry for any grammer issues you might have found nbsp thankyou nbsp

http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/windows-10-wont-load-after-driver-update/td-p/5833454
Relevancy 90.3%

I'm getting following error. this error apears after selekting language. On the next screen.
Error message is:
Load Driver
No device driver were found. Make sure that the installation media contains the correct drivers and then click OK.

I have installed Widows 7 ultimate in past in my desktop without problems but everytime i want to install in laptop and notebook i have the same error.

Tech Forum can you give me some advice regarding this problem thanks.

see the link below during installation
http://img203.imageshack.us/img203/5826/strange.jpg

A:Windows 7 Load Driver Error during installation

Hi -

Can you see the HDD in BIOS?

What type of HDD do you have?
How old is it?

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f217/windows-7-load-driver-error-during-installation-523470.html
Relevancy 90.3%

I have Power Suite on my computer and it said I had 6 outdated drivers which I updated. Now my Windows won't load. It gets to my desk top background, but can't even load the program icons. Then it starts the same process all over. I'm sure one of the updated drivers is the issue, but I can't get the computer to start in order to try System Restore. What can I do? I'm not very computer savvy, so go slow..

Thanks!

A:[SOLVED] windows won't load after driver update- xp

This is the reason it is best to get the driver from the manufacturer website. Most Driver Finder software will recommend incompatible drivers.

I see no beneficial reasons to using Power Suite software.

Boot the PC into Safe Mode. Once logged in run a System Restore

Restart the PC > repeatedly tap F8 during boot > at the Advanced Options choose Safe Mode

http://www.techsupportforum.com/forums/f10/solved-windows-wont-load-after-driver-update-xp-609365.html
Relevancy 90.3%

Just upgraded to Windows 10 on my Ideapad N585. On startup get a message Dolby audio driver didn't load. I seem to remember this issue upgrading from Win 8 to 8.1, but don't remember the fix. Do we have to wait for an updated driver? I have sound, but not sure what driver it's using. (haven't even found drivers yet) Another issue I discovered is that I couldn't turn off the touch pad using Fn+F6. The Elan driver settings do have a box to disable the touch pad when using an external pointing device, though, so that's not a major issue.










Solved!
Go to Solution.

A:Dolby audio driver won't load after Windows 10 upg...

Hi UpstateBodhi,
 
Thanks for Posting!
 
Here is the guide to fix the Dolby
First Remove all  Audio Driver and Dolby software from your device.
 
1. Press the Windows key? +R, type appwiz.cpl.msc and press Enter. On the list of installed programs, remove anything that relates toRealtek Audio Driver or Conexant  and Dolby (reboot if necessary).
 
2. Delete the C:\Drivers folder Install this audio driver back
https://download.lenovo.com/consumer/mobiles/audio134w81.exe
 
3. Open Device Manager > Sound, video, and game controllers and check if the High Definition Audio becomes Realtek High Definition Audio or Conexant High Definition Audio (this indicates that the sound driver is installed properly).
 
When the audio driver is properly installed, install the DolbyAdvancedAudio and the DolbyHomeTheater from the following path:
 
For Realtek:
C:\Drivers\Audio\Realtek\6.0.1.6957\PCEE4
 
For Conexant:
C:\Drivers\Audio\Conexant\8.64.49.0\DolbyGUI
 
About your Elan touchpad problem, Try installing this driver
https://download.lenovo.com/consumer/mobiles/1ato08w8.exe
 
Let me know if this works for you!
Solid Cruver



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

https://forums.lenovo.com/t5/Lenovo-C-E-K-M-N-and-V-Series/Dolby-audio-driver-won-t-load-after-Windows-10-upgrade/td-p/2132561
Relevancy 90.3%

After a few days, I plugged in my USB "Kingston Data Traveler" flash memory and Windows doesn't recognize it & says "No drivers are installed for this device." I have installed two programs since this last worked fine. Any suggestions are welcomed - thanks.

A:[SOLVED] Windows USB Driver Fails to Load

Hi u01545n and welcome to TSF !

Make sure you have SP2 installed. You can find out by going to start => run and typing winver or by going to your system properties (windows key + pause/break key). It's also advised you go to Windows update and make all latest critical updates.

http://www.techsupportforum.com/forums/f10/solved-windows-usb-driver-fails-to-load-163267.html
Relevancy 90.3%

I ve decided to try and format my laptop today however I have a frustrating error that keeps occurring and I don t really know what to do I have an ASUS U JC laptop When I purchased the laptop it didn t come with any CD DVD s I ve tried to install some of the drivers from the ASUS website with some of them saying I needed to download the x version because what I had downloaded was x even though I m pretty Driver Windows error 7 Reinstalling - Load sure I downloaded the x file There s one file that I had downloaded yet I m not sure what to do Reinstalling Windows 7 - Load Driver error with it it s called U Jc Anyhow this is the error that pops up when I m trying to reinstall Windows A required CD DVD drive device driver is missing If you have a driver floppy disk CD DVD or USB flash drive please insert it now Note IF the Windows installation media is in the CD DVD drive you can safely remove it for this step Any help would be appreciated

A:Reinstalling Windows 7 - Load Driver error

Why are you formatting? That system should have a factory restore-to-defaults mechanism.

Where did you get the Windows 7 version you are attempting to install?

http://support.asus.com/Troubleshooting/detail.aspx?SLanguage=en&m=U43Jc&p=3&s=252&os=&hashedid=a4GWw0dnTS7NP0nu&no=1775

Louis

http://www.bleepingcomputer.com/forums/t/475682/reinstalling-windows-7-load-driver-error/
Relevancy 90.3%

When I try and install the update for my video driver and the latest Windows update Windows Genuine Advantage Validation Tool KB I get an error message saying quot Windows could not load installer for display Contact your hardware vendor for assistance quot Also and I don t know if this is related or not I am unable to view quot properties quot from my desktop or to change screensaver background themes from the control panel From googling the error message I suspect that it has something to do with update load unable to driver/windows my video driver but I m not certain I m not sure what specs you need re my computer Here are the basics if you need more unable to load driver/windows update let me know Dimension Intel R Pentium R CPU GHz Version x Family Model Stepping Speed MHz Microsoft Windows XP Home Edition Version Service Pack unable to load driver/windows update Location C WINDOWS PID -OEM- - Hot Fix KB Video Cared Model Intel R G GL GE PE GV Graphics Controller Driver ialmnt sys Tuesday April Supported Sound Card Manufacturer Analog Devices Inc Model SoundMAX Integrated Digital Audio Driver smwdm sys Friday February Supported Any suggestions or instructions for correcting the problem would be greatly appreciated Thanks Charles nbsp

https://forums.techguy.org/threads/unable-to-load-driver-windows-update.651952/
Relevancy 89.01%

Hello there Let me Windows a to *Load 7 Having Driver* due installing trouble Ultimate describe my problem I have a HP Pavilion -n sn x convertible Laptop It had Windows on it and most of the updates failed to install then I updated to Windows still some of the updates had the same effects Nevermind here is what I did on it I wanted to install on a new GB Partition Windows Ultimate x SP I took the ISOs from an Windows ISO downloader from cough heidoc dot net cough It ain't having any piracy just a free downloader that gives you Having trouble installing Windows 7 Ultimate due to a *Load Driver* download links from Microsoft Meh I think I broke one rule there nevermind The issue is that I had an Load Driver error because it couldn't Having trouble installing Windows 7 Ultimate due to a *Load Driver* find the CD DVD Driver If you look at the Device Specs caps there is no censored driver for any disks caps I tried changing the USB device with the installer to somewhere else One big issue is my BIOS UEFI It has just some settings for Virtualization Tech Secure Boot and CSM caps nothing else caps That makes me because I cannot change to boot from USB and other stuff BIOS Version Insyde F or something like that I do think however that I can download a driver that is not compatible or that has the most success rate and to download it to the computer Then I could load it there and the installation should be normal What do you think Will I get the help to install Windows Seven on my Laptop P S If it works I will activate it with a Genuine Key Not gonna tell you the key number tho

A:Having trouble installing Windows 7 Ultimate due to a *Load Driver*

Just create a usb 3.0 installer using Asus`s EZ Installer Program.

You need a working PC with a DVD rom, a windows 7 install DVD and I would use at least an 8 GB usb stick, you can always try a 4 GB stick.

Get the EZ Installer program from Asus support, it does all the work and so simple a Computer Technician could do it.

ASUS USA

http://dlcdnet.asus.com/pub/ASUS/mb/...uide_print.pdf

You have to disable Secure Boot, if you can`t ... well then.

The bios should be set to Legacy or Legacy & UEFI and the hard drive should be MBR, not GPT.

If you can`t do any of those things, then you may be installing Windows 8.1 again, then I`d upgrade to 10.

Good Luck

http://www.sevenforums.com/installation-setup/397169-having-trouble-installing-windows-7-ultimate-due-load-driver.html
Relevancy 89.01%

Hi I was reading an article on a website when suddenly my computer restarted by itself When it got to the part where it says Starting Windows it restarted again It would not go past that Starting Windows part I tried using Startup Have Windows load. to Signature use Driver won't Enforcement' 'Disable Repair from my Windows Windows won't load. Have to use 'Disable Driver Signature Enforcement' installation disk but that didn t fix it I tried to start up in Safe Mode It only loaded some files before restarting again The last file that it loaded before it restarted was CLFS sys I managed to get past the starting windows part by using Disable Driver Signature Enforcement When I got to my desktop a program called quot Windows Recovery quot started scanning my computer It said I had to purchase their full module to repair my system I knew it was virus so I went here to uninstall it When I got back to my desktop again I got a notification saying a program tried to change my default search engine or something When surfing I would also get redirected to websites related to StopZilla So I used system restore When I did I would no longer get redirected to websites related to StopZilla I d still get redirected to other websites such as jamcamslive com all-allergies com and some other websites I forgot Another problem I have is when I use my Administrator account I would get a BSOD I had to use a regular account so I wouldn t get that I would appreciate any help I get

A:Windows won't load. Have to use 'Disable Driver Signature Enforcement'

Hi jeremiahh,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.

http://www.bleepingcomputer.com/forums/t/397079/windows-wont-load-have-to-use-disable-driver-signature-enforcement/
Relevancy 89.01%

I recently installed the program Super Utilities Pro to clean up my system a little bit. The next time I turned on my computer I received the following message:

Windows failed to start. A recent hardware or software change might be the cause.

File: \Windows\System32\Drivers\HWFProt.sys
Status: 0xc0000221
Info: Windows failed to load because a critical system driver is missing, or corrupt.

From reading the following post I can tell that I need to uninstall Super Utilities Pro however, I am unable to get past this error message when windows boots up. I downloaded my copy of Windows Vista from my school and so I do not have a boot disk...the files are on the hard drive.

If someone can help, I would really appreciate it. Thanks.
 

Relevancy 89.01%

Hi i was wondering if any body could help! My CD drive has all of a sudden stopped working, not sure why but when i go to the devices properties the following message appears:
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Has anybody got any solutions, thanks.

My device is a 'Optiarc DVD RW AD-5170A ATA', and im currently running WINDOWS VISTA ULTIMATE 32bit.

THANKS.
 

A:Windows cannot load the device driver for this hardware.(Code 39)

Ive sorted the problem but i will leave this solution incase any body else needs help with same problem.
Step 1: Start Registry Editor
Click Start, click Run, type regedit, and then click OK. Registry Editor starts.
Step 2: Delete the UpperFilters registry entry
1. In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
2. Expand SYSTEM, and then expand CurrentControlSet.
3. Expand Control, and then expand Class.
4. Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
5. In the right pane (topic area), click UpperFilters.

Note An UpperFilters.bak registry entry may also appear. To delete the UpperFilters registry entry, you must click UpperFilters and not UpperFilters.bak.
6. On the Edit menu, click Delete.
7. When you receive the following message, click Yes to confirm the deletion of the UpperFilters registry entry:
Are you sure you want to delete this value?
The UpperFilters registry entry is removed from the {4D36E965-E325-11CE-BFC1-08002BE10318} registry subkey.

Note Do not exit Registry Editor. You must have this program for the next step.
Step 3: Delete the LowerFilters registry entry
1. In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
2. Expand SYSTEM, and then expand CurrentControlSet.
3. Expand Control, and then expand Class.
4. Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
5. In the right pane (topic area), click LowerFilters.

Note An LowerFilters.bak registry entry may also appear. To delete the LowerFilters registry entry, you must click LowerFilters and not LowerFilters.bak.
6. On the Edit menu, click Delete.
7. When you receive the following message, click Yes to confirm the deletion of the LowerFilters registry entry:
Are you sure you want to delete this value?
The LowerFilters registry entry is removed from the {4D36E965-E325-11CE-BFC1-08002BE10318} registry subkey.
8. Exit Registry Editor.

Step 4: Restart the computer
 

https://forums.techguy.org/threads/windows-cannot-load-the-device-driver-for-this-hardware-code-39.700033/
Relevancy 89.01%

I am trying to load Windows XP Home Edition on a new drive in a Gateway TA Tablet PC I ve read lots and lots for driver Windows SATA XP Load Solved: TA1 a on Can't Gateway of info on doing this and I think I ve got the process right I know that XP does not come with any native SATA drivers Solved: Can't Load SATA driver for Windows XP on a Gateway TA1 and that the drivers have to be downloaded separately and then loaded using the F option when prompted by the Windows XP installation I have downloaded several SATA drivers from tips given in the various forums I have scanned and created the floppy disk I have an external floppy drive for the laptop as instructed All that went really well but I ve obviously not found the right driver I still get the error message that there is no hard drive installed Does anyone out there know where I can get the proper SATA driver for the TA A point in the right direction would be appreciated Thanks much nbsp

Relevancy 89.01%

My HP Pavilion with Windows 7 is not seeing my Samsung TS-H653L CD/DVD reader/writer. When checking my Device Manager for this unit, it shows the following message: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)." I tried to "update this driver" but the answer is that "this driver is up to date". Can't find any website with Samsung TS-H653L driver updates. Tried removing the driver and rebooting but same thing happens. Any ideas are appreciated.
 

A:Solved: Windows cannot load the device driver, code 39

Run a Restore and Follow instructions to fix your issue: http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
 

https://forums.techguy.org/threads/solved-windows-cannot-load-the-device-driver-code-39.1025369/
Relevancy 89.01%

Trying to install Windows everything was going fine until I tried to install the vidoe card drivers. It gets as far as the windows is starting page and freezes as it goes to desktop.

A:[SOLVED] Can't load Windows &amp; after gfx card driver install

Hello carthwright and welcome to TSF,

Please provide us the specifications of your system?

Are you using the latest VC drivers for your GPU?

http://www.techsupportforum.com/forums/f217/solved-cant-load-windows-and-amp-after-gfx-card-driver-install-673640.html
Relevancy 89.01%

Hi I was reading 'Disable use Signature Enforcement' won't Driver load. to Windows Have an article on a website when suddenly my computer restarted by itself When it got to the Windows won't load. Have to use 'Disable Driver Signature Enforcement' part where it says Starting Windows it restarted again It would not go past that Starting Windows part I tried using Startup Repair from my Windows installation disk but that didn t fix it I tried to start up in Safe Mode It only loaded some files before restarting again The last file that it loaded before it restarted was CLFS sys I managed to get past the starting windows part by using Disable Driver Signature Enforcement When I got to my desktop a program called quot Windows Recovery quot started scanning my computer It said I had to purchase their full module to repair my system I knew it was virus so I went here to uninstall it When I got back to my desktop again I got a notification saying a program tried to change my default search engine or something When surfing I would also get redirected to websites related to StopZilla So I used system restore When I did I would no longer get redirected to websites related to StopZilla but I d still get redirected to other websites such as jamcamslive com all-allergies com and some other websites I forgot Another problem I have is when I use my Administrator account I would get a BSOD I had to use a regular account so I wouldn t get that I would appreciate any help I get Here is the DDS txt The ark txt and Attach txt are attached For some reason the first check boxes and the show all check box in gmer exe is grayed so I can t check those I m supposed to leave checked DDS Ver - - - NTFS AMD Run by gerodias at on Fri Internet Explorer BrowserJavaVersion Microsoft Windows Home Premium GMT - AV Norton Disabled Outdated C A - C B- F C- B B- FCCFDC SP Windows Defender Enabled Updated D DDC A- F- fae- E -DA C ACF SP Norton Disabled Updated A BBD -AA - A - B- B EB B E FW Norton Disabled B F DB -C - E - D - C F F E Running Processes C Windows system wininit exeC Windows system lsm exeC Windows system svchost exe -k DcomLaunchC Windows system svchost exe -k RPCSSC Windows System svchost exe -k LocalServiceNetworkRestrictedC Windows System svchost exe -k LocalSystemNetworkRestrictedC Windows system svchost exe -k netsvcsC Windows system svchost exe -k LocalServiceC Windows system svchost exe -k NetworkServiceC Windows System spoolsv exeC Windows system svchost exe -k LocalServiceNoNetworkC Program Files Realtek Audio HDA AERTSr exeC Windows SysWOW svchost exe -k AkamaiC Program Files x Application Updater ApplicationUpdater exeC Windows system svchost exe -k LocalServiceAndNoImpersonationC Program Files Common Files LogiShrd LVMVFM LVPrcSrv exeC Program Files x Common Files LogiShrd LVMVFM LVPrS H exeC Windows system lxducoms exeC Program Files x Norton Engine ccSvcHst exeC Program Files x CDBurnerXP NMSAccessU exeC Program Files x Microsoft Search Enhancement Pack SeaPort SeaPort exeC Program Files Common Files Microsoft Shared Windows Live WLIDSVC EXEC Program Files x Yahoo SoftwareUpdate YahooAUService exeC Program Files x Common Files Pure Networks Shared Platform nmsrvc exeC Program Files Common Files Microsoft Shared Windows Live WLIDSvcM exeC Windows System alg exeC Windows system SearchIndexer exeC Windows system svchost exe -k NetworkServiceNetworkRestrictedC Windows system WUDFHost exeC Windows System svchost exe -k secsvcsC Program Files Windows Media Player wmpnetwk exeC Windows system taskhost exeC Program Files x Norton Engine ccSvcHst exeC Windows system Dwm exeC Windows Explorer EXEC Program Files Realtek Audio HDA RAVCpl exeC Program Files x Lexmark - Series lxdumon exeC Windows System igfxtray exeC Windows System igfxpers exeC Program Files x Lexmark - Series lxduMsdMon exeC Program Files x McAfee Security Scan SSScheduler exeC Program Files x Yahoo Search Protection SearchProtection exeC Program Files x Cyb... Read more

A:Windows won't load. Have to use 'Disable Driver Signature Enforcement'

Hi jeremiahh, and welcome to Bleeping Computer.It has been a while since you posted your problem - so, please describe how your computer runs now and what problems remain...Then, firstly,Please launch Malwarebytes' Anti-Malware, click the Update tab, and then Check for Updates. Then choose the Scanner tab and select "Perform Quick Scan", then click Scan.The scan may take some time to finish,so please be patient.When the scan is complete, click OK, then Show Results to view the results.Make sure that everything is checked, and click Remove Selected.When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.Copy&Paste the entire report in your next reply.SecondlyDownload OTL.exe by OldTimer to your Desktop.Close all windows and double click OTL.exe.In the "Custom Scans/Fixes" window (under the light green bar) paste the following in bold:

netsvcs
drivers32
%SYSTEMDRIVE%\*.*
%systemroot%\*. /mp /s
CREATERESTOREPOINT
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\Results\Install|LastSuccessTime /rs

Click Run Scan and let the program run uninterrupted.When the scan completes, it will open two Notepad windows. OTL.Txt and Extras.Txt. These are saved in the same location as OTL. Post both logs in this thread.You may need to use two posts to get it all.

http://www.bleepingcomputer.com/forums/t/397083/windows-wont-load-have-to-use-disable-driver-signature-enforcement/
Relevancy 89.01%

Hi all I my laptops of Windows Both a problem... XP! ... can't load I driver think (BTHidMgr) was hoping that someone can help me with my laptops problem I actually have laptops and both of them have the same EXACT problem Whenever I try to boot the computer Windows XP it goes to a black screen with several choices quot Safe Mode Both of my laptops can't load Windows XP! ... I think a driver (BTHidMgr) problem... quot quot Safe Mode with Networking quot quot Safe Mode with Command Prompt quot quot Last Known Good Configuration quot and quot Start Windows Normally quot Whenever I select one of the Safe Mode Choices the last entry with command prompt is always multi disk rdisk partition WINDOWS System Drivers BTHidMgr sys The screen will freeze there for a few minutes and then restart and try to boot up again Whenever I select the quot Last Known Good Configuration quot or quot Start Windows Normally quot choices the screen for Windows XP loading up appears Every time I try to load up either laptop they give up after a few minutes and the laptops restart and try to boot up again I would really appreciate some help getting BOTH of my laptops up and running again Thanks Casey email protected nbsp

A:Both of my laptops can't load Windows XP! ... I think a driver (BTHidMgr) problem...

Have you installed any bluetooth thing recently such as a headphone, cellphone? Try this. Remove the battery and put it back in. Open in safe mode. Will the BTHidMgr.sys appear? Do you have the Windows CD so you can repair the system?
 

https://forums.techguy.org/threads/both-of-my-laptops-cant-load-windows-xp-i-think-a-driver-bthidmgr-problem.1014261/
Relevancy 89.01%

Scenario:
CMOS battery died. XP got corrupted somehow. I d/l'd Windows 7 Ultimate ISO from MSDN and made a bootable dvd. Installed Windows 7 from the DVD. When I boot up now, I get the following error:

Windows failed to load because a critical system driver is missing or corrupt.

Status: 0xc0000098
File: Windows\system32\DRIVERS\ql40xx.sys

Can anyone shed some light on how to resolve this?

Thanks,

Evan

A:Windows failed to load b/c driver is missing or corrupt

: QLA40XX iSCSI Host Bus Adapter
Description: QLogic iSCSI Storport Miniport Driver
Company: QLogic Corporation File size: Various

Go to website of that company and try to download driver.

You may have to use another compter and download to a finger drive etc.
Once you have it, you can boot from the Windows DVD and try to install.

Alternatively, you can go to device manager, under view, check show hidden drivers. If you find one with a yellow marker, you can try to dowload from there.

http://www.vistax64.com/drivers/282622-windows-failed-load-b-c-driver-missing-corrupt.html
Relevancy 89.01%

I have recently installed BETA nvidia graphics drivers in an attempt to speed up my video games, during the latest install, the computer froze, and shut down. I attempted to reboot the computer, but the windows 7 loading screen was all that was showing. I am posting this in safe mode, as i have tried everything in my knowledge to fix this, to no avail. I do not want to format my PC until all options are used. Please help, thank you in advance.(i have another PC with windows xp which can be used for downloading and installing any necessary software).

A:Windows 7 stuck on load screen after driver install

Hi Alden H,

First, please post your computer specs. Posting computer specs definitely helps troubleshoot computer issues more efficiently. Since you are able to boot the computer in safe mode, try un-installing the BETA Nvidia videocard drivers that you installed. Another thing you can do is to go to device manager, un-install the videocard from display adapters and then reboot the computer. Hope everything works out well for you.

http://www.techsupportforum.com/forums/f217/windows-7-stuck-on-load-screen-after-driver-install-617251.html
Relevancy 89.01%

This is my nd attempt to install a brand new WD FZEX in my Windows x machine I assumed to find/load driver Windows 4TB 7 Fails WD4003FZEX: the first one was bad so I exchanged it for another I am NOT new to PCs in fact I am ashamed to say I'm a tech with years experience and this one has me stumped I have installed countless drives and this one should be dead easy Windows simply says it failed to find the driver The BIOS does see and correctly identify the drive The motherboard is a modern Gigabyte GA-Z -D H with UEFI so no problem there I would be very grateful to anyone that can help me solve this OS Windows Ultimate x CPU Intel Core i - 4TB WD4003FZEX: Windows 7 Fails to find/load driver K Motherboard GIGABYTE GA-Z -D H Memory GBCorsair Vengeance x GB CMZ GX M X C Graphics Card EVGA NVIDIA GeForce GTX Ti Hard Drives Boot GB SSD Samsung Electronics Pro Series MZ- PD BW Secondary Drives WD TB amp WD GB

A:4TB WD4003FZEX: Windows 7 Fails to find/load driver

Download the drivers from the manufacturers website?

http://www.sevenforums.com/hardware-devices/344213-4tb-wd4003fzex-windows-7-fails-find-load-driver.html
Relevancy 89.01%

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Windows Critical update and now sadly I have all USB drivers with yellow triangle type sign..tried uninstalling drivers etc..still the same. Search web but found nothing that I can handle ..anyone help please..I have 3 USB drives I cannot use..I se them in device manger etc but nothing I can do to them.. I see only my c: drive and my cd/dvd drive indicated as good. I updated USB drivers and am desperate for help..My backups etc are on the USB drives..restore does not see m to work. I read about filters and conflicts..can anyone guide me here..

A:Urgent Please:Windows cannot load the device driver for hardware.

Have you tried a system restore to a restore point before this happened?

http://www.sevenforums.com/general-discussion/183873-urgent-please-windows-cannot-load-device-driver-hardware.html
Relevancy 88.15%

hi basically I have an Acer critcal is or missing corrupt...help! windows to failed driver load Aspire Z notebook it was going a bit slow recentley so I decided to wip it clean and start again before I even had the chance to think about rebooting it the wholoe thing shutdown and failed to boot I thought this was my chance to wipe the whole think clean using Alt F acre Erecovery management windows failed to load critcal driver is missing or corrupt...help! so I started doin it and after long hours of the progress being stuck on I decided it was time to turn of the computer and try it again which I did and the whole thing was completed fine but when it restarted it came up with the message quot windows failed to load a critical driver is missing or corrupt quot and attempted to restart and try again only to be greeted with the same message again I have no windows DVD but after a few hours of scratching my head I realized that my brother has the exact same laptop so I made a system repair disk from his laptop to use on mine only to find that quot startup repair cannot fix this computer automatically quot and now it boots up but gets stuck on the windows logo screen and I've currently been there for almost hours Can anyone help me please the laptops only a year old and I can't really afford the cost to get it fixed professionaly any help would be greatky appreciated Thanks in advance guys

A:windows failed to load critcal driver is missing or corrupt...help!

Bump!

http://www.sevenforums.com/general-discussion/236381-windows-failed-load-critcal-driver-missing-corrupt-help.html
Relevancy 88.15%

I'm installing Windows or Windows to an older PC with a motherboard no fresh unsigned Windows How install load driver during 7/10 64bit to longer supported by the manufacturer Asus A V-E Deluxe The system is capable of handling either OS This will be a fresh install to blank hard drives The last updated driver is unsigned and originally meant for Windows Vista The driver is for the on-board hard drive controller and is required in order for Windows to see the hard disks I know how to disable enforcement of unsigned drivers once the OS is already installed but I need to do this during initial install or the install will fail after first reboot starts loading but after a few seconds freezes with just the Windows logo displaying Attempts to run a repair also fail Attempting to load the driver during install keeps failing as it's unsigned The driver database w in Windows doesn't seem to have a comparable driver to support this Anyone know a way around this Thanks for any help

http://www.tenforums.com/drivers-hardware/69886-how-load-unsigned-64bit-driver-during-windows-7-10-fresh-install.html
Relevancy 88.15%

Hi there!

I am new to the forums and hopefully I am posting this in the right area!

I have had difficulties downloading Windows 8 from a USB drive containing a copy of Windows 8 (x64) I copied from my main laptop. It gets to the load screen but then states a Load Drive Error. I have tried several solutions online but no luck.

PC: Acer Aspire E 15 / E5-521-48KN
CPU TYPE: AMD A4-6210 APU with AMD Radeon R3 Graphics

My guess from perusing the following forum by link: Sata Controller Driver missing form Wndows 8 for Acer Aspi

Is that I need to download the proper drivers for the Windows 8 setup to be successful. Any thoughts on how to proceed?

Thank you so kindly!

http://www.eightforums.com/drivers-hardware/74324-windows-8-setup-load-driver-error-acer-aspire-e15.html
Relevancy 88.15%

Bought a new Logitech webcam C270 Have installed, uninstalled several times then went online with logitech support and we uninstalled again and then downloaded from their website. In device manager under the tab imaging devices it gives us the error message that Windows can not load my device driver for my Photosmart C6200 or for my Logitech C270 webcam.

We did an uninstall and reinstall and it still says that. The support tech said that is all he could do that I would have to go to Gateway and download my OS driver. Talked to them but they can't help me because it would cost a fortune because my computer is older and not covered under their plan.

HELP
 

A:Windows can not load my device driver for my C270 Logitech webcam

Since both devices show as not being able to load the driver, have you tried uninstalling the Photosmart C6200 software as well?
Could be there is a conflict between the 2 drivers.

If that does not help, it could be a problem with the USB port setup, so updating the motherboard drivers[/URL] is indeed a next step.
 

http://www.techspot.com/community/topics/windows-can-not-load-my-device-driver-for-my-c270-logitech-webcam.174037/
Relevancy 88.15%

Hello,
I have a Dell XPS , bought it 2 weeks ago , all good , but when I tried to re-install the nvidia graphics driver the windows crashed, and the boot system was down.Tried to fix it , couldnt , and I didnt make a backup either so I went for the format. At the moment the HDD is clean and when I try to install windows7 i get the following error:"Load Driver:a required dvd drive device is missing". I tried everything that I found on this forum/google related to this problem but with no success.

Any ideas are welcomed , thank you.

A:Windows 7-load driver a required dvd drive device is missing

Take a look at these posts:
Windows 7 Installation Errors : Troubleshoot Step by Step
Common Installation Problems and Their Solutions
Questions to use for help with Installation Issues
Tutorial quick reference list for Installing Windows 7
Questions to use for help with Installation Issues

http://www.sevenforums.com/installation-setup/189689-windows-7-load-driver-required-dvd-drive-device-missing.html
Relevancy 87.29%

Hi everybody,

This is my first post on this forum. I've recently come across a problem with my computer. I'm running Windows Vista 32 bit. I shut the computer down one day, and the next day turning it on I came across this problem.

File: \Windows\System32\Drivers\nqgbwc.sys

Status: 0xc0000225

Info: Windows failed to load because a critical system driver is missing, or corrupt.

I have no clue what this means. It said insert windows installation disc and repair computer. I did this, self repair found nothing. I then tried system restore and it could not initialize which is a pain in the ass. My last resort is to reinstall windows vista but I think I'm going to lose everything.

If anyone has any advice or suggestions it would be greatly appreciated.

Thank you,
Kevin

A:Windows failed to load because a critical system driver is missing, or corrupt.

First see if you can boot into Safemode without it giving you that error. If you can, first try searching for that driver to see if its even in your system32 folder.

I recently just checked my computer and it is not in mine by default, which means its a file relating to a third party program/app that has been installed on your machine. If you can figure out what the abbreviation for NQGBWC is from the list of installed applications on your computer, then you can isolate which program on startup is causing the failure on booting windows due to the missing system file.

As you may have already tried, i cannot simply google search nqgbwc.sys as it gives me just THIS post only. If you cannot find the problem, then the only thing possible from there is to reinstall your OS but of course BACK UP EVERYTHING IMPORTANT FIRST.

http://www.vistax64.com/drivers/280335-windows-failed-load-because-critical-system-driver-missing-corrupt.html
Relevancy 87.29%

windows \system32\drivers\ msisadrv.sys
 
Status: 0x000000f
 
would like to repair this without reloading if possible
 
thanks
Brett

A:windows failed to load because a critical system driver is missing or corrupt

I have a few questions:
1. Do you have a repair disc?
2. If not, does the PC have a recovery partition?
3. Can you boot from a live CD (such as Puppy Linux)?
4. What were you doing before the problem started?

http://www.bleepingcomputer.com/forums/t/594504/windows-failed-to-load-because-a-critical-system-driver-is-missing-or-corrupt/
Relevancy 86.86%

After being hit with a Trojan virus, I re-installed Windows 7 Premium 32-bit.

However, I now cannot connect to my wireless network. In device manager, there is a yellow triangle and ! against network controller. I have no idea what network controller I have. Speccy can only identify a Marvell Yukon network adapter but no network controller.

Any idea how I can locate the driver for the controller please? I have tried every trick I could find on different forums, to no avail so far.

Hardware IDs:
PCI\VEN_168C&DEV_002B&SUBSYS_E025105B&REV_01
PCI\VEN_168C&DEV_002B&SUBSYS_E025105B
PCI\VEN_168C&DEV_002B&CC_028000
PCI\VEN_168C&DEV_002B&CC_0280

Many thanks

A:Network controller driver issue, cannot connect wirelessly

Welcome to Seven Forums!

Was the Trojan removed or did you just re-install Windows 7 like you mentioned?
To be safe scan your computer with this: Download Malwarebytes Anti-Malware 1.65 - FileHippo.com
Update it first then follow its instructions fully, after tell us the results.

Also what model and brand is the Wireless card so we can get the latest drivers for it from a Manufacturer's website. =)

http://www.sevenforums.com/drivers/254936-network-controller-driver-issue-cannot-connect-wirelessly.html
Relevancy 86.86%

just installed windows 7 yesterday... when i try to install my epson T10 printer driver its says cannot install. Os not compatible...

so how can i install it??

does anybody knows how???

Thanks...

A:Epson printer driver not compatible???

Go to the Epson site and get the latest driver. A Vista driver will most likely work if there is not a win 7 one yet.

http://www.sevenforums.com/software/16722-epson-printer-driver-not-compatible.html
Relevancy 86.43%

Hello,

I want to connect my HP 915 Printer with Windows 7 Home Edition 62 Bits laptop can you please help me with a driver that i can use. I know you are not providing any support for this Printer. But, I need to connect HP 915 Printer with Windows 7 Home Edition 62 Bits Laptop. Please advise.

Thank you.

A:HP 915 Printer Driver For Windows 7 Home Edition 62 Bits

Hi Welcome to Seven Forums .. Did Windows not find a Driver for your Printer ? ..

Have you tried the Vista 64 Bit Driver ? ...
Software & driver downloads HP 915 Inkjet All-in-One Printer | HP? Support

http://www.sevenforums.com/drivers/345417-hp-915-printer-driver-windows-7-home-edition-62-bits.html
Relevancy 86%

I tried installing my HP 1310 all-in-one printer driver on my Windows Vista Home Premium 32 bit system, and a message pops up telling me that I cannot install the software because it only works with Windows XP or earlier operating systems. Is there any way around this?

Thanks.

A:HP 1310 printer driver not compatible with Vista

Hi, lizastreet, and welcome to the forums.

Have you tried visiting HP's website for drivers for Vista?

I went there myself and only saw 1311, 1312, 1315 (3 models) and 1317 and 1318 listed as possible model choices....

http://www.vistax64.com/drivers/201465-hp-1310-printer-driver-not-compatible-vista.html
Relevancy 85.57%

PC info from another thread http forums techguy org windows-xp -media-center-not-working html post The other day a blue screen screen error/driver Solved: Blue wont normally PC windows is load disabled/desktop error appeared on my PC about ati dvag infinite loop I looked online for Solved: Blue screen error/driver is disabled/desktop PC wont load windows normally help and came across a number of different forums Most of the responses stated that Solved: Blue screen error/driver is disabled/desktop PC wont load windows normally possibly my driver needed updating From looking at the Display Driver in the Device Manager I was able to see that I have an ATI Radeon X I went to the amd website to update my driver and whilst Solved: Blue screen error/driver is disabled/desktop PC wont load windows normally doing so I got a message saying it couldnt locate a specific file Then the installation wizard appeared and I followed the steps but then I got a message stating that the one I have installed is not digitally signed and it could affect the performance I had no idea what this meant but the warning message put me off so I cancelled it I then tried to open Media Centre but I was unable to watch live TV because I kept getting an error message the video card had an error or was not installed properly so I went back to the Device Manager and the icon on the first drive indicated the device had been disabled red x and the second driver indicated the device wasnt responding working properly exclamation mark in a yellow triangle so I reinserted the installation CD and opened setup It was successful so I tried to open MC again but I got another blue screen error When I tried to start Windows again my PC was extremely slow The icons that appear in the lower tray on the right hand side would not load and then it would just hang I tried everything from booting in Safe Mode with Networking and Command Prompt but it was the same thing it would just hang and then freeze periodically It took me - minutes to open System Properties just by right clicking My Computer gt Properties gt Device Manager and the window would open but then it would stop responding I tried System Restore check disk even VGA boot but nothing seems to work Im currently using my sisters laptop to write this thread so I have limited access to the internet nbsp

A:Solved: Blue screen error/driver is disabled/desktop PC wont load windows normally

https://forums.techguy.org/threads/solved-blue-screen-error-driver-is-disabled-desktop-pc-wont-load-windows-normally.1019213/
Relevancy 84.71%

HP does not seem to have a 64 bit driver for the HP 960c printer (specifically, not the 960 cse or cxi)
HP Printer driver install wizard leads me all the way but eventually gives a message that it cannot find the correct driver. I have a New Dell Inspiron 5000 series with Windows 7Pro. This is the first software/driver I am trying to install and feel a bad omen Can anyone help please?

A:Need driver for HP 960c printer compatible with Win7pro 64bit

I hav hp deskjet 932c install disk if it will help i'll try to send u a copy , u mite hav 2 change compatibly mode 2 run it .
I downloaded the drivers from m$ website instead of using the disk on last win 7 install or mayb it was hp website, 1 or the other.(I hav a dell inspiron 560)

http://www.sevenforums.com/drivers/382190-need-driver-hp-960c-printer-compatible-win7pro-64bit.html
Relevancy 84.71%

Hi all,

I'm installing a network printer onto windows 7, the printer is hosted from a windows xp machine.

Windows 7 detect's the printer, and then says that its looking for drivers on windows update, this might take a while. However I never see an option to browse for the drivers myself.

I've tried running the exe to install windows 7 drivers for the Canon Pixma i4500 but it says the printer is not detected, well of course it isn't its a network printer.

Any suggestions are welcome and appreciated.

A:Add Network printer only looks at windows update for driver

Hello,

You need to install the windows 7 drivers onto the Windows XP machine as additional drivers.

See:
Microsoft Corporation

Also, you need to make sure that the printer is shared so that the Windows 7 machine can see it. You can then add the printer via the Add Printer Wizard or browse to it and double click the printer (\\XPMACHINENAME).
Dave

http://www.sevenforums.com/drivers/212947-add-network-printer-only-looks-windows-update-driver.html
Relevancy 84.28%

Last week I had to replace my old computer which used XP SP2. The new system uses Vista Home Premium and I'm unable to get my Canon MultiPass F60 printer to print. I've tried an Internet search for a driver and I've tried to add a printer through the Control Panel. My current printer isn't listed under the Canon products.

Can anyone direct me to a download that will resolve this issue or tell me which Canon product under Add a Printer will work for mine? Any help will be appreciated.

Gawain
 

A:Driver for Canon MPF60 Printer, WIndows Vista Home Premium

I've looked everywhere for you and can't find a trace of evidence that a Vista compatible driver exists for the MPF60.

Sorry
 

https://forums.techguy.org/threads/driver-for-canon-mpf60-printer-windows-vista-home-premium.709575/
Relevancy 83.85%

Hi all,

I have a new home PC and ethernet-ready printer. (HP 6940)
I have my home PC connected via ethernet cable to my wireles router. (Linksys G)
I also have the printer connected to the router via Ethernet.
I can print OK from my home PC.

My wireless laptop has all the printer drivers installed, and has connectivity to the printer. (The laptop checked for and correctly identified the printer on the network during installation)

When I try and print, after a short timeout, I get a message stating that the print job did not complete, and one of the possible causes is loss of power, printer unplugged, or I'm on a Virtual Private Network (VPN)

I disabled the VPN on my laptop and it still doesn't work, I get the same message.
I checked the router settings, all seemed OK

Any suggestions for me?
 

Relevancy 83.85%

My wife has a work laptop that she uses to connect to the internet and she can only do this through her work VPN.

I have a windows 7 desktop and can connect fine to a wireless HP 6500A Plus wireless printer on the same home network that my computer is connected to. So my computer prints wirelessly just fine.

She needs to print onto this same printer. We just spent 2 hours on the phone with a tech support guy from her work and we can't get it.

I'm computer savvy but not familiar with VPN's at all. How do we get her laptop, connected through VPN, to connect to the printer on my home wireless network.

Also, she accesses the VPN through my home network.
 

Relevancy 83.85%

Hello Guys,
Good Day!!

I would like to ask some help from anyone of you,

I have here a laptop Windows 8 Operating System (home group)
and i would like to add printer which is installed in windows 7 desktop Computer (connected to domain)

but the problem after trying to connect to the network printer, here is what i encountered.
says:
No Driver Found

here is the screenshots

http://attachments.techguy.org/attachment.php?attachmentid=225470&stc=1&d=1374562421
Thanks,
Arjay
 

Relevancy 83.42%

I am having no luck installing a driver for a product I use for backup First let me explain I am a Radio Control enthusiast I fly multiple aircraft from one transmitter not at one time My manufacture is JR the transmitter designation is X The backup program USB Load Cannot driver. works fine under Win running on a Dell laptop studio bit My Dell desktop is bit and I cannot load the bit driver The same is true for my Surface Book The USB driver has an extension of sys and the driver updater is looking for inf The software is no longer Cannot Load USB driver. supported by JR This is understandable as the transmitter has been out of production for some time and the newer Transmitters use SD cards O upgrading to a new Transmitter is not a problem but replacing receivers and re-programming them because of changes in technology is not feasible now So far my one solution is running my backups on my laptop which I was going to retire Any ideas on how I could get around this issue Thanks John

http://www.tenforums.com/drivers-hardware/54144-cannot-load-usb-driver.html
Relevancy 83.42%

I'm new to windows 7. I use a linksys wusb version2.6. I have the driver burnt to a cd. I need a detailed walkthrough on how to load a driver file from a cd-r

A:How to Load a driver fr a cd-r

What type of format is the file/s on disk?

http://www.sevenforums.com/drivers/171238-how-load-driver-fr-cd-r.html