Windows Support Forum

Z240 Num lock

Q: Z240 Num lock

Bios ver. N51 1.27 Does anyone know where the option is to turn on Num Lock for the HP Z240? I have looked throguh the service manual and there was no listing for turning on num lock like other models.Example: the z210 Bios does offer this. z240 https://cdn.cnetcontent.com/87/f7/87f7c232-7b8b-4ce0-b452-5de5da0d9e9b.pdfz210 http://h20566.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02787107 Note: I am not interested in setting the forInitialKeyboardIndicators option in the Windows registy. I'm looking for an option similar to was is shown here. http://support.hp.com/doc-images/512/c02683746.jpg

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-Num-lock/td-p/5738846
Relevancy 100%
Preferred Solution: Z240 Num lock

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 47.3%

what to do when a dell latitude d630 laptop is not on but cap lock, num lock and scroll lock is on and i'e tried to check the VGA and the processor

A:Dell latitude d630 laptop is not on but cap lock, num lock and the scroll lock is on

Are they on solid, or are all three LEDs flashing?

http://en.community.dell.com/support-forums/laptop/f/3518/t/19994256
Relevancy 46.44%

Hi,

how to disable Caps lock, num lock, scroll lock screen messages?



I have desktop pc with two keyboards usb and bluetooth. Also TOSHIBA Bluetooth Stack software, but in device manager: keyboard > hid keyboard device both using microsoft drivers. And I dont have any software installed for keyboards. Also bluetooth has separate system tray indications (it is also disabled) so its not that. I made some googling and found other fix it with Hkey_Local_Machine\Software\Widcomm\BTConfig\General KeyIndication set to 0, but I dont have it in registry. Acualy I dont have anywhere in registry KeyIndication. So any ideas how to disable it? Thanks

A:Caps lock, num lock, scroll lock screen messages

Hi,

You'll find that the messages are controlled by a piece of software that came pre-installed on your machine when you bought it. Try looking for a Hotkey managing app to see if the notifications can be disabled.


OS

http://www.sevenforums.com/general-discussion/153296-caps-lock-num-lock-scroll-lock-screen-messages.html
Relevancy 46.44%

For some time now, i have been experiencing that my Num Lock, Caps Lock and Scroll Lock all lights up (not blinking) all at the same time, I tried to google it but i can not find any solutions or explanations for it.

Does anyone know if it is bad? and what is causing this?

I am having a wired keyboard with nothing fancy just a standard issue Logitech keyboard.

A:Num Lock, Caps Lock and Scroll Lock all lights up (not blinking)

Can you toggle those functions off, one at a time? Sometimes restarting the computer will use the last state it was in, I'd fully shut down and pull the power cord from the computer and the keyboard cable then put them back and try again.

http://www.sevenforums.com/hardware-devices/346865-num-lock-caps-lock-scroll-lock-all-lights-up-not-blinking.html
Relevancy 45.58%

I have a brand new HP Z240. I have installed the SSD in the M2 slot on the board and updated the BIOS 1.27. The board or the BIOS will still not see the SSD. it is a Crucial 500GB SSD. Any help would be appreciated. Thanks.

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Z240-can-not-see-my-M2-SSD/td-p/5769871
Relevancy 45.58%
Q: Z240

Hi Team, We are trying to install win7 on Z240 but due to some issue the SSD does not gets detected we have also tried installing Win7 via CD/USB but still no luck can someone help me regarding this issue.

A:Z240

If secure boot is enabled in BIOS, try disabling it and enable legacy boot.Also in case you are using NVME SSD, then you may need to inject the corresponding driver

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/Z240/td-p/5529208
Relevancy 45.15%

Hello We are going to be purchasing a lot of HP Z Tower Workstations from our supplier in the future and I have been given one to QA in our environment nbsp We currently use HP BCU to make available and enable the TPM on our current HP systems We are using version of HPBCU Today Workstation HP TPM PPI Z240 I have downloaded version of the HPBCU to begin creating a configuration file for the new Z workstations nbsp The problem I have is that the TPM PPI physical presence settings are nowhere to be found in the UEFI BIOS firmware user interface What we want to do is suppress the prompt that would allow users to deny HP Z240 Workstation TPM PPI modifications This is was possible in previous incarnations of HPBCU on different models of workstation in the form of the following setting nbsp Embedded Security Activation Policy nbsp nbsp F to Boot nbsp nbsp Allow user to reject nbsp nbsp No prompts nbsp Unfortunately this is not in the file created using on the Z and as I said nothing appears in the user interface I have checked under Security gt TPM Embedded Security but the only options I see there are TPM Device and TPM State nbsp Is it possible to configure the physical presence settings on this model of workstation using HPBCU If not then I will need to reccommend an appropriate alternative make HP Z240 Workstation TPM PPI model where it is possible nbsp We deploy scripts that run HPBCU through configmgr SCCM and can't have this prompt annoying our users and potentially allowing them to deny the change nbsp We also can't have technicians HP Z240 Workstation TPM PPI visit every Z to configure this manually Our I T estate is fairly large at computers so automatic management is crucial to us nbsp Any help would be massively appreciated nbsp Many ThanksC Solved View Solution

A:HP Z240 Workstation TPM PPI

Updating the System BIOS/Firmware seemed to solve this issue

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z240-Workstation-TPM-PPI/td-p/5597459
Relevancy 45.15%

Hi,I would like to know the MTBF of Z240 workstations.In one site I found MTBF as 2 million hours with SSD. Is it correct?

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/MTBF-z240/td-p/5744704
Relevancy 45.15%

I need to upgrade from a Z220 to a Z240 using the same drives and o/s and software.  Will those drives run on the 240 without crashing?  If not, what drivers would I have to supply to use a program like Acronis Snap Deploy (set to restore to different hardware)?  

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z240-z220/td-p/5590254
Relevancy 45.15%

Hello, i just bought an hp z240 workstation (tower format).I'm trying to configure a transcend m.2 30GB drive. After installing it on the dedicate m.2 slot on the motherboard i can't see it in the bios and even in windows 7.the first drive is connected on sata0 (original 1tb hdd with win 7 installed on it)On bios settings the m.2 slot is enabled. any suggestion? Thank you

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/m-2-ssd-on-hp-z240-tower/td-p/5639374
Relevancy 45.15%

Dear Support Team,I want to procure HP Z240 workstation for  one of my project. The online datasheet shows that it comes up with only Windows 7 or Windows 10. But my system requirement is with Windows 8.1. Can HP Z240 haedware allows me to use it with Windows 8.1, if I purchase windows seperatley.RegardsWaqas Khalid

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Windows-8-1-for-HP-Z240/td-p/5767910
Relevancy 44.72%

Hi, I'm wanting to install 2 x 3.5" HDDs in my new Z240 SFF Workstation. There is a bay that already came with an insert and one of the new drives slots into that just fine. However it looks like some sort of insert/caddy is needed for the "External/internal shared 3.5" bay", as it is too big for the drive itselt to slot in. It looks like this bay is sized for some sort of optical disk. I've called HP and their spare parts people here in Australia, but no one can find the part needed. Can some one please help? 

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-SFF-caddy-insert-for-3-5-quot-HDD-in/td-p/5778715
Relevancy 44.72%
Relevancy 44.72%

My system came with a Nvidia PCIe card. I would like to remove this card and use the integrated graphics. Whenever I remove the PCIe the system will just beep, and the integrated wouldn't work. I went in the bios but cannot find anything to enable the integrated. Thanks

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/Z240-Integrted-graphics/td-p/5628346
Relevancy 44.72%

Hello, I am working on installing windows 7 enterprise 64, on a z240 SFF. I am missing the USB drivers for it. I have the driver disk that came with it and I have installed every driver that is on there, along with going to HP support software and drivers web link and downloading everyone from there. There has not been one driver that has solved this problem, so I was looking for some sort of help on finidning one.l I tried a few other drivers for different model of towers but no luck. please help

A:z240 sff USB driver missing

Hi: Please post the hardware ID for the USB controller that needs the driver. To find the hardware ID, go to the device manager and click on the device needing the driver. Then click on the Details tab at the top of the device window. Now you will see a Property drop down list, and it will be set to Device Description. Drop down on that list, and select the 2nd item (Hardware ID's). Post the top string of characters that you see in the window.

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/z240-sff-USB-driver-missing/td-p/5746056
Relevancy 44.72%

nbsp HP Z Tower WorkstationProduct number L T AVTo update the Firmware I was provided this link by customer support http h www hp com hpsc swd public detail sp ts oid amp swItemId wk amp swEnvOid Using the link I was able Updating Firmware for Z240 to download and run sp exe nbsp Then Updating Firmware for Z240 a set of instructions appear as follows nbsp Another FWUpdLcl exe utility in the ME Flash Local-Win directory is designed to update the ME firmware within a -bit or -bit Windows environment from the Run box or a command prompt The ME can be updated by executing the following command FWUpdLcl exe -f BIN -generic Alternatively when running a -bit Windows environment use the command FWUpdLcl exe -f BIN nbsp nbsp -generic The ME Flash folder contains the binary update image to be used with the utility nbsp The update binary image and the Local-Win folder contents can be copied to any storage volume available within the Windows operating system nbsp nbsp Since I am using -bit Windows I assume I need to run the command nbsp FWUpdLcl exe -f BIN nbsp nbsp -generic nbsp My question is how do I complete this command i e how do I tell it which folder to look in to find the files nbsp Much thanks for any guidance nbsp nbsp

A:Updating Firmware for Z240

When you run HP service packs, they will expand and place their contents under an own directory within C:\swsetup.Specifically in your case, if you run sp74202.exe, you should see a new directory C:\swsetup\SP74202 has been created with the contents of the service pack within. Alternatively you can use 7-zip to peek inside the service pack exe without running it since the exe is a self extracting zip file that runs the installer once decompressed  In any case, a newer ME update exists here but i'd first apply the latest system firmware update available here. When looking at the HP service pack links above, it's good practice to selectively click each "Description", "Enhancements", "Installation Instructions" "Release Notes" "Fixes" and "Revision History" tabs and read the information (some of it is repetative but you'll soon learn where to focus your attension). The contents of these tabs contain important and relevant information on what has been improved, fixed, which system it's for, how to install the update, etc. And if a previously installed SP is not listed in the "revision history" tab, that release may have been pulled by HP due to some fauly behaviour or other issue! Pay particular attension to the prerequisits as in some instances firmware updates have to be stepped (that is you can't always simply apply the latest). And if you read such boaring stuff, the system firmware (BIOS) Installation Instructions tab would have given you a clue where the sp files are expanded to  Have you tried simply enter the command (as specified) via a command prompt window but changing directories to where the FWUpdLcl.exe file is located? Just keep in mind that sp74202 is the initial ME firmware release so nothing sould update  So best to apply the latest system firmware (BIOS), then the ME firmware, then maybe the latest ME software (under chipset drivers). Best to bookmark this page which lists all the downloads for your z240 Windows 10 64bit tower system so check it out periodically.

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Updating-Firmware-for-Z240/td-p/5575077
Relevancy 44.72%

Have a new Z240 Workstation with a Samsung 950 Pro 256GB M.2 nVMe SSD.Windows 10 will install to the SSD from USB no problem but the machine fails to find the OS post install.The Samsung 950 Pro SSD does not show up in the UEFI section of the BIOS, but it does show up under Legacy devices.Secure Boot is not enabled. If I add a SATA HDD,  Windows Boot Manager gets installed on the SATA device and the machine will then boot Windows 10 from SSD. How do I get the machine to boot from SSD without having to have a SATA HDD installed? I've updated the BIOS from 01.11 to 01.21 with no change in the above.

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-wont-boot-from-M-2/td-p/5587319
Relevancy 44.72%

HP sent a 16gb 2Rx4 PC$-2133P-Ra0-10 seperately with the new PC (HP Z240 SZh3). It came with 8gb RAM. I replaced the 8gb RAM with 16gb RAM but it wont boot. Blinking RED power light which turns to white blinking light. HELP!

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z240-cannot-boot-with-16gb-RAM/td-p/5621704
Relevancy 44.72%

HP sent a 16gb 2Rx4 PC$-2133P-Ra0-10 seperately with the new PC (HP Z240 SZh3). It came with 8gb RAM. I replaced the 8gb RAM with 16gb RAM but it wont boot. Blinking RED power light which turns to white blinking light. HELP!

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/HP-Z240-cannot-boot-with-16gb-RAM/td-p/5621704
Relevancy 44.72%

I have a z with a i - CPU on my desk that refuses to recognize the attached monitor properly nbsp In the Xorg log file there is no mention of EDID data nbsp The result is that the HD display connected is set to x rather than x nbsp I'm running Debian and have updated the system BIOS to the latest N EDID Linux and z240, Ver nbsp I've also built the latest driver available from Intel for linux nbsp nbsp nbsp nbsp nbsp nbsp z240, Linux and EDID nbsp nbsp LoadModule intel nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Loading usr lib xorg modules drivers intel drv so nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Module intel vendor X Org Foundation nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp compiled for module version nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Module class X Org Video Driver nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp ABI class X Org Video Driver version nbsp Using an old PCIe x video card I have let me connect all of the ports on the monitors HDMI DVI and VGA and Debian correctly set the resolution each time and Xorg log showed all of the expected EDID data nbsp A different z system here is working fine using the onboard video nbsp Since I need to have up to RAID adapters in the system at once I can't just add a different video card nbsp I have not tried Windows to see if it works there though I am going to try to do that on Friday nbsp Is there a video BIOS update that might fix this problem nbsp or is the hardware broken nbsp thanksedc

A:z240, Linux and EDID

I would guess you would have better driver support through windows vs linux for drivers.

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/z240-Linux-and-EDID/td-p/5697112
Relevancy 44.72%

I am trying to setup my new HP Z240 workstation, but cannot get the graphics card to operate at any resolution above 1024 X 768. The graphics card is an NVIDIA QUADRO K620. It is connected to the monitor with a DVI-D Dual link cable. The monitor is an HP w2408. The monitor has two inputs (DVI and VGA). I have the VGA input connected to another HP computer with a NVIDIA GeForce GT 610 card (this computer/card/monitor displays at 1920 x1200). When I checked the adapter modes (using the list modes option), the best mode listed is 1024 x 768. The NVIDIA spec sheet lists the max resolution with DVI-I as 2560 x 1600 or 1920 x 1200. What can I do to get the max resolution from my monitor (1920 x 1200)?











Solved!
View Solution.

A:Graphics resolution on Z240

Update.  Problem solved. When I realized that the monitor in DVI mode was not being recognized as PNP, it pointed to the monitor as the problem. Installed new monitor, everythng works as it should. Evidently the VGA input to the old monitor functioned properly while the DVI portion was defective (card or cable connection). Dave6666

http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/Graphics-resolution-on-Z240/td-p/5601923
Relevancy 44.72%

Hello, I have some problem to open a ticket in warranty for an HP Z240. I'm registered on HP Support and also HP Enterprise Support, but when I try to open a ticket after the serial number check the site platform give me an error: this is not the right site for this serial number. I get this error on HP Support and also HP Enterprise support. What is the procedure to open a warranty ticket for this workstation?????If I call the telephone support number is always busy......it is crazy  Thanks,Alessandro

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Warranty-HP-workstation-Z240/td-p/5840120
Relevancy 44.29%

Hello, My company recently purchased some Z240 SFF workstations and put in aftermarket multi-media card readers in the 3.5" slot. The card reader uses the internal USB 3.0 header, so I had to unplug the USB 3.0 cable for the for the front usb ports in order to get it to work. The media card reader works just fine in Windows, however, I get a POST error message on startup: "Cable detection Error 41A- Front USB2 Not Connected. Front USB cable has been detached or unseatted from the motherboard. Press Enter to continue." Is there anyway to disable POST messages? I can't seem to find anything in the UEFI/BIOS to do this.

A:Z240 POST Message disable?

One of the HP engineers who has been very helpful to us here has recently posted on a related question, and he has access to the schematics and the internal design details of these workstations.  His post is on this thread,  HERE : http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z420-USB3-0-Head... Dan tells how to jumper the header to make it believe the cable is still connected, and it would not matter whether you jumpered at the motherboard end or the far plug end, as long as you got the correct pins/plug holes jumpered. Note his caution.... that seems to suggest that the pins on the motherboard are not as stout as the ones we are used to seeing.  A proper sized insulated wire jumper with a short segment of wire exposed at each end can be used as a jumper at the far plug end of a cable, rather than the little plastic jumpers we use at the motherboard pin end of thins.  If you carefully figure out the wire colors this should work. The wiring of such headers/cables within a HP workstation family are usually the same, and things can stay the same from one generation to another, in my experience.

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-POST-Message-disable/td-p/5761989
Relevancy 44.29%

When I download graphics card driver 15.20.1045 (sp73511.exe) from the HP site and install this, the properties display 15.200.1045.So I'm now not sure if the corect driver is installed, because I'm still getting graphics card errors. Our software supplier PTC recommends the certified 15.20.1045-version so how do I get this right?

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Graphics-Card-driver-Z240/td-p/5847833
Relevancy 44.29%

HiI have bought a z240 tower which runs really well with win 7 pro. Recently, I wanted to add an SATA extension card, but without any success. I am looking for a simple SATA controller without RAID functionality (which unnecessary slows down the boot procedure). Unfortunately, HP does not offer any SATA boards as accessories - Is there any recommendation for such a card from your side? I've bought a LogiLink PC0059A card, unfortunately, the system does no longer startup when connecting drives to it. The hp BIOS  screen appears as usual, then the card shows the attached drives, after that the hp bios screen appears again and reamains without any reaction (reboot required). Thanks for any hints Tom   

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z240-add-SATA-card-no-working/td-p/5725275
Relevancy 44.29%

Greetings nbsp We've purchased Dells for years but recently started (Graphics) 3.3 Beep Z240 SFF Code giving HP a look The first unit I received just stopped working during deployment testing and gives me long beeps red LED with short beeps white LED According to the manual this translates to The embedded controller has timed out waiting for BIOS to return from nbsp graphics initialization I couldn't Z240 SFF Beep Code 3.3 (Graphics) find any specific troubleshooting steps for this error so I did the following based on the testing I was doing nbsp - Cleared CMOSThe system wouldn't boot after applying BIOS settings using the HP BIOS Configuration Utility so maybe something went wrong there That said I applied settings with this tool multiple times before on the same system without issue nbsp but thought it was worth a start Here's my config file nbsp BIOSConfig Legacy Boot Options Disable Enable Legacy Boot Order HDD USB CDROM SATA HDD SATA NETWORK EMBEDDED UEFI Boot Options Disable Enable Configure Legacy Support and Secure Boot Legacy Support Enable and Secure Boot Disable Legacy Support Disable and Secure Boot Enable Legacy Support Disable and Secure Boot Disable- Swapped video cards Nvidia Quado K with a known good card We bought two units for testing so I had an identical system to swap from - Swapped memory - Reseated all cables nbsp Any ideas on what else I should try before sending it back

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Z240-SFF-Beep-Code-3-3-Graphics/td-p/5716527
Relevancy 43.86%

Hi. I am trying to run the intel onboard graphics and an nvidia quaddro on the same machine simultaneously. HP says it is possible to do so but I cannot find the option in the BIOS to enable the onboard graphics as a primary driver. Right now, the onboard graphics cards becomes automatically disabled as soon as I plug the Nvidia in.  Thanks for your help

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/HP-Z240-Running-multiple-graphics-cards/td-p/5854467
Relevancy 43.86%

Hi, I had a look inside and the Z Turbo drive appears to be connected to the motherboard (location 23 on the motherboard map in the manual) and not using a SATA port or any of the four main PCIe3 slots. Only one of the PCIe3 slots is being used and that is for the NVIDIA graphics card, and only one of the SATA ports is being used and that is for the Slim BluRay drive (connected to SATA3). That means there are 3 x SATA ports available, and 2 x 3.5" and 1 x 2.5" bays available, by the looks of it. My question is, is it possible to put 3 x HDD/SSD drives in it, i.e. 2 x 3.5" and 1 x 2.5"?

A:Adding drives to HP Z240 SFF with a Z Turbo drive

@jeffparker? Yes I believe you can add them. Check the quickspecs below:http://h20195.www2.hp.com/v2/GetPDF.aspx/c04762288.pdf The following are supported.500GB SATA 7200 rpm 6Gb/s 3.5" HDD LQ036AA1TB SATA 7200 rpm 6Gb/s 3.5" HDD - LQ037AA2TB SATA 7200 rpm 6Gb/s 3.5" HDD - QB576AA3TB SATA 7200 rpm 6Gb/s 3.5" HDD - QF298AA500GB SATA 7.2K SED SFF HDD1TB SATA 7200 rpm 8GB 3.5" SSHD (hybrid) - M7S54AA And the following SSD'sA3D25AA 128 Gb sata 3A3D26AA 256 GB sata3D8F30AA 512Gb Sata3F3C96AA 1Tb Sata3G7U67AA 256 Gb Sata3 SED OPALT3U07AA 240 Gb Ent class 2T3U08AA 480 Gb Ent class 2

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Adding-drives-to-HP-Z240-SFF-with-a-Z-Turbo-drive/td-p/5710925
Relevancy 43.86%

Hello  Does anyone know how to enable legacy support on Z240 Workstation? Under "secure boot configuration" in BIOS I choose "Legacy Support enable and Secure boot disable" but I save and reboot, it reverses back to "Legacy Support disable and Secure Boot Enable" Any suggestion please? Many thanks  

http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/how-to-enable-Legacy-Support-on-Z240-Workstation/td-p/5678692
Relevancy 43.86%

Dear all, I am going to buy a HP Z240 tower workstation. Do anyone know that the decibel of this computer? Is it louder? Do you know which HP workstation works quietly? Many thanks! Celia

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Does-HP-Z240-Tower-Workstation-work-noisily/td-p/5854515
Relevancy 43.86%
Relevancy 43.86%

Brand New HP Z240 Tower Workstation with HP Solid State Drive will not BOOTHP diagnosticsHard Drive SMART Check: WARNING (1: NOT AVAILABLE)Hard Drive Short DST Check: NOT AVAILABLE (1: NOT AVAILABLE)

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/No-Boot-Device-HP-Z240-Tower-Workstation/td-p/5592736
Relevancy 43.86%

I just got a HP Z240 Tower with a 400W power supply, 32 GB of RAM and 512 GB M.2 SSD.  Is the GeForce GTX 970 Graphics card compatible?  My PCIe v3 x16 slot is available.

A:HP Z240 Tower Compatible with GeForce GTX970

Greetings, The 400 power supply could be an issue. A stock GTX 970 lists a recommended 500 watt power supply. You have to verify the 10.1 inch to 10.5 inch card will fit in your chassis. You should have the required UEFI BIOS if the system is brand new and you have a PCIe x16 3.0 slot available on the system board. Cheers!

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/HP-Z240-Tower-Compatible-with-GeForce-GTX970/td-p/5676932
Relevancy 43.86%

I am trying to install Windows 7 on a HP Z240 SFF workstation but when I boot from the Windows 7 USB media, it does not show the HDD even though it is connected.  it would be great if someone could help me out with this issue. Thanks in advance.

A:Unable to Install windows 7 on HP Z240 SFF Workstation

Hello matt_william,  If you are using a retail version of Windows 7 Operating System. You may have to install the Intel Rapid Storage Technology driver while installing the OS. On the HDD partition windows, you will get LOAD DRIVER option, you have to install Intel Rapid Storage Technology driver.   Please find below link to download Intel Rapid Storage Technology driver. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=8323799&swItemId=wk_156996_1&swEnvOid=405... NOTE: THIS ACTIVITY NEED TO BE PERFORMED ON ANOTHER UNIT.   TO USE THE INTEL RAPID STORAGE TECHNOLOGY DRIVER DURING A NEW OPERATING SYSTEM INSTALLATION: 1. Download the file by clicking the "Download" or "Obtain Software" button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved). 2. Double-click the downloaded file and follow the on-screen instructions. 3. Navigate to C:\SWSETUP\SP73487 and unzip "f6flpy-x64.zip" to a USB key for a 64-bit installation. 4. Use the newly created driver installation media during operating system setup to install the drivers.  Once you copy the driver on another USB media, connect it with unit on which you are trying to install OS.  Click on Load Driver and navigate to USB and install the driver. Once the installation is complete, You will be able to access HDD and will be able to install OS.  I hope that answers your question.  I am an HP employee, the opinions expressed here are my personal opinions, not of HP. Make it easier for other people to find solutions, by marking my answer ?Accept as Solution? if it solves your problem. ***Click on "Thumbs up" button to the left side of my post to acknowledge the post ***

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Unable-to-Install-windows-7-on-HP-Z240-SFF-Workstation/td-p/5648294
Relevancy 43.86%

Hello  Does anyone know how to enable legacy support on Z240 Workstation? Under "secure boot configuration" in BIOS I choose "Legacy Support enable and Secure boot disable" but I save and reboot, it reverses back to "Legacy Support disable and Secure Boot Enable" Any suggestion please? Many thanks  

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/how-to-enable-Legacy-Support-on-Z240-Workstation/td-p/5678692
Relevancy 43.43%

Hi there nbsp My work machine is a HP Z SFF PC Last month the machine began randomly hanging and displaying blue screen errors There isn't much in the way of discernible patterns but it tends Z240 SFF blue crashes and HP screens random hangs, to happen when the machine is in use rather than idling and I can consistently reproduce it when using the Prime stress testing utility When I set it to maximise CPU heat as soon HP Z240 SFF random hangs, blue screens and crashes as I stop the test the machine blue screens indicating a cooling issue The machine's fan is very quiet although on occasion it gets very loud after a restart and then quietens down I would expect the fan to get louder as the CPU gets hotter during the HP Z240 SFF random hangs, blue screens and crashes stress test but this doesn't happen so I wonder if the fan is malfunctioning and if this is a known issue with these machines or if there is any possible resolution nbsp Please see below for the output of BlueScreeView which displays the error codes produced by recent blue screen errors nbsp nbsp

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z240-SFF-random-hangs-blue-screens-and-crashes/td-p/5658407
Relevancy 43.43%

Hi all, I got a Z240 SFF workstation with a 512G HP Z Turbo Drive G2 intalled on M.2 slot as a boot drive. I recently add a 1.2T Intel 750 PCIe SSD on PCIe slot 4 for additional storage. However after the Intel 750 SSD was intalled, the computer began to shutdown automaticly after couple of minutes running. The issue will be fixed after remove the Intel 750 SSD. The system is running 64bit Win10, with Samsung NVMe Driver. The Intel 750 SSD can also be read and write when installed and Intel Data Center Tool shows that the SSD is healthy. I think the auto shutdown issue is related to overheating on 750 SSD. I am wondering if the motherboard of Z240 SFF is compatible with Intel 750 SSD. Does anyone have Intel 750 PCIe SSD installed on their Z240 SFF or any other Z Workstation? Thanks! NOS_ATX

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Auto-shutdown-issue-of-Z240-SFF-workstation-when-Intel-750/td-p/5696977
Relevancy 43.43%

Guys, I just erceived a new z240 workstation and cannot find where to disable DEP in the BIOS.  we have 3 z230's and I found it in that bios.  Can anyone help.  Have legacy software that will not install correctly with DEP enabled. Thanks

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Z240-DEP-Data-execution-Prevention-disable-Can-t-find-in/td-p/5775621
Relevancy 43.43%

Hi, I?d like to install a media card reader (e.g. HP 468494-005) into the shared internal/external 3.5" drive bay of my HP Z240 SFF workstation but it doesn't fit. It probably needs a carrier of some kind, because the casing is just a bit too wide and there are no holes for the standard screws. I couldn't find any instructions on the HP website. Any help would be greatly appreciated!

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Z240-SFF-installing-a-card-reader-into-the-shared-internal/td-p/5739086
Relevancy 43.43%

This should be easy but I can't find the PCI Serial Port Driver for HP Z240 VEN_8086 DEV_A13D. I think that's the AMT driver  for this puppy.... I think its called sunrisepoint or skylake chipset? Things that make you go hmmmmm  

A:PCI Serial Port Driver for HP Z240 VEN_8086 DEV_A13D

Hi: You need this driver...the AMT SOL driver is included. This package contains the latest Intel Management Engine Software for the supported Workstation models and operating systems, as well as utilities for updating and checking status. ftp://ftp.hp.com/pub/softpaq/sp76501-77000/sp76975.exe

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/PCI-Serial-Port-Driver-for-HP-Z240-VEN-8086-DEV-A13D/td-p/5745582
Relevancy 43.43%

Hello. I am currently working on getting a fresh installation of Windows 7 on our HP Z240's in order to create our standard business image. I was able to install Windows 7 Enterprise but am having one issue. Whenever the workstation goes into sleep mode it will do a hard shutdown. I've installed the latest drivers found here for the chipset, graphics, NIC and sound. The issue still occurs. I've done the same on three different workstations and have experienced the same issue between all three. The OEM Windows 7 installation has no issues on the same exact workstation. Can anyone assist me with this? Thank you!

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/HP-Z240-with-Windows-7-Hard-shutdown-before-sleep-mode/td-p/5673196
Relevancy 43.43%

It appears that newly shipping Z240 Tower workstations DO NOT have an internal USB header anymore?  The System Board Overview graphic in the Maintenance & Service Guide (Oct 2015) shows #7 as a USB 2.0 internal header.  However, the location where the header should be on the system board is actually a 1x6 pin header (P150) listed as "MEDIA".  The other USB 2.0 Header, #5, is taken up as the front USB cable. So is there an updated manual that shows what is actually on the system board?  The Z240 Tower QuickSpec is dated March 2016, so I'm hoping there is a newer manual out there somewhere.   Any idea what the P150 MEDIA header is for?  Is this for the old media card readers?  I have the optional SD card reader, but that is attached to #8 which is the internal USB 3.0 header. Any way to attach deveices that need an internal USB 2.0 header?

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-internal-usb-header-and-updated-Maintenance-amp-Service/td-p/5598284
Relevancy 43.43%

Issue: Whever the system is booted/rebooted after POST, while transfering control to OS, the system goes into a pause/halt (keyboard and mouse doesn't responds)Workaround: As soon as one of the monitors is turned off, seems control passes to Windows 7 ("Loading windows" on black screen shows up) and boots normally, now the monitor can be turned on and dual display works as usualAdditional info: While the system is paused, if the NUM/CAPS/SCROLL lock is pressed in a particular sequence (even though the lights actually don't respond), it looks like the key-press sequence gets stored in buffer. This is verfied once one of the monitor is turned off, the same keypress pattern lights up on the keyboardSetup: z240 with 2x23" monitor connected to Display-ports, HP smartcard keyboard and mouse connected to rear USB. BIOS version 1.11 (SP74759)Has anyone experianced similar issue or anyone has a fix for this?

A:z240 boot issue with dual monitor setup

Same here.New Z240 workstation with Xeon E3-1245 v5 and two monitors HP Z24n, both attached on the motherboard's DisplayPorts.OS: Windows 7 Enterprise x64 Sp1 with latest patches and drivers (including monitors' one), BIOS (01.27 Rev.A)  I found two workarounds: power down and restart, or briefly attach another DVI monitor. I will try your trick to power off a monitor.  P.S. Initially I had the same problem using two Samsung DVI monitors and HP DisplayPort->DVI adapters. I thought it was a problem with the signal conversion and changed monitors. Probably this post is an instance of the same problem:http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z-240-Video/m-p/546...

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z240-boot-issue-with-dual-monitor-setup/td-p/5531610
Relevancy 43%

I can't get new Z workstation to boot into WinPE on Windows x Windows x and Windows x with only and NVMe drive installed to the M slot on the MB I've tried plain OEM Media and WDS with WinPE with different drivers added to the boot wim file all no luck nbsp It seems there must be some sort of bug relating to the Samsung nbsp pro nbsp M nbsp NVMe GB drive I'm using When I leave this as the only drive CDRW the computer always hangs as soon as WinPE starts If I leave the Samsung NVMe drive installed and add another SATA drive such as a Samsung Pro SSD it behaves fine- WinPE then loads and I can see both drives nbsp I was able to install Windows nbsp on the NVMe drive and booted into Win as long as the SATA drive was present As soon as I removed the nbsp SATA drive nbsp and it starts loading windows it immediately hangs again nbsp It shouldn't be NVMe driver support as Windows WinPE has native windows when or booting Samsung... hangs Workstation WinPE Z240 NVMe support and has the same problem so it must be something else I suspect it's either something I have to turn off in the BIOS or some other BIOS UEFI bug nbsp Has anyone seen this before nbsp Thanks nbsp Edit Z has latest BIOS

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z240-Workstation-hangs-booting-windows-or-WinPE-when-Samsung/td-p/5574579
Relevancy 43%

When running an SCCM 2012 R2 task sequence to install Windows 10 on a Z240, the network driver is working in Windows PE during the download and apply Windows image. I'm using Auto Apply Drivers step and after it's completed, the computer restarts into the Windows 10 OS, tries to set up the devices and then the task sequence fails because there is no network driver detected that it can use. I've tried to import multiple types of network drivers from both HP and Intel with no success. I've tried to specifically apply the Z240 driver package instead of using Auto Apply Drivers with no success. I've also tried to install a Windows 8.1 image instead and it still fails at the same point. I'm confused because it works fine in PE, but not after restarting and booting into the Windows OS. Any help or suggestions would be appreciated.

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Missing-Z240-Network-Driver-after-booting-to-Windows-in-SCCM/td-p/5600498
Relevancy 43%

I have upgraded from Win 7 to Win 10 and tried everything mentioned in this thread, but cannot remove the yellow flag.  Code 10 error in the device manager. registry entries are: any other suggestions? Chris

A:High Definition Audio Device has Yellow Flag on HP z240

Hi: Do you have the same issue with the same hardware ID? If not, please post the hardware ID for the HDA device that needs the driver. I only see W10 graphics driver for the nvidia graphics adapter.

http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/High-Definition-Audio-Device-has-Yellow-Flag-on-HP-z240/td-p/5684915
Relevancy 40.85%

My Toshiba satellite c650d seems to have power...the on button is green. The screen is black, the numbers and caps lock lights are on and wont go off. The disk drive makes the usual booting up noise but that is all she does. Ive unplugged and removed the battery and that did nothing. I cant even turn it off with the on/off button to remove that battery and then turn it on again. I removed and reinserted the memory (both) and I can't take the hard drive out, its held in by a screw. Is my "friend" dead?

A:toshiba satelite c650d caps lock light, number lock is on an

If, as it sounds, it is booting up but not ever displaying anything on the screen, check the cable between the motherboard and the screen. It might just be one of the connectors (at either end) has worked loose. With the computer well booted up, move the screen gently down to nearly closed. If you ever see anything on the screen then it could be the cable is faulty where it hinges.Always pop back and let us know the outcome - thanks

http://www.computing.net/answers/windows-8/toshiba-satelite-c650d-caps-lock-light-number-lock-is-on-an/1496.html
Relevancy 40.85%

I went into Ease of access center, Make the keyboard easier to use, and turned on toggle keys to make sounds when I hit these keys - Caps lock, Num Lock and Scroll Lock - but I get no sound when I hit any of these keys. What is the problem?

A:toggles keys selected to make sounds for Caps Lock, Num Lock

is the system volume up

Check Toggle Keys and hit apply

http://www.bleepingcomputer.com/forums/t/339887/toggles-keys-selected-to-make-sounds-for-caps-lock-num-lock/
Relevancy 40.42%

Hi My errors are a freezing cursor - dead mouse on every other reboot and With file transfers from one HDD to another I will frequently get a system lockup of Windows forcing me Windows to and Transfering HDD on Lock-Up boot) (not HDD. Files there Mouse Lock-Up to reboot hard reboot My System is CLEAN of viri and trojan as wella s spyware I Have WinXP Pro Sp Running Zone Alarm Pro v Eset NOD v Webroot Spysweeper for coookies and alt scans Spyware Doctor v resident and Trojan Hunter v Mouse Lock-Up (not there on boot) and Windows Lock-Up Transfering Files HDD to HDD. also resident on boot I am also booting and browsing with Pop-Up Stopper Pro My Hardware Abit NF -S rev Athlon Barton core Best OCZ Mhz RAM - Gb in dual channel Audigy Pro for sound Latest drivers for all quot to best of my knowledge quot Any Helpers More on Mouse Lock-Up (not there on boot) and Windows Lock-Up Transfering Files HDD to HDD. the file tranfer lock-ups The two other drives are Seagate drives and identicle They're Gb each I have not reformated them since my last Windows reinstall - they were detected right off Could be Windows isnt seeing those drives for what they are Even worse a bus problem Thank you in advance

A:Mouse Lock-Up (not there on boot) and Windows Lock-Up Transfering Files HDD to HDD.

have you tryed running safemode? is it the same?
run a chkdsk: start > My Computer > right click the drive u want to scan > properties > tools > error checking - Check Now > put tick in both boxes > click start > click to scedule on next boot > restart

see if it returns any errors or corrects this

http://www.techsupportforum.com/forums/f10/mouse-lock-up-not-there-on-boot-and-windows-lock-up-transfering-files-hdd-to-hdd-72456.html
Relevancy 40.42%

Not a techie.  Can't get straight answer ANYWHERE.  New laptops tend to NOT have indicators on the keys.  Hoping Windows 10 has indicators that can be turned on and PROBABLY would show up in the tray at the bottom right of the screen. 
I have heard of sites where such things can be downloaded but again NOT a techie, so I hesitate to go outside of Windows/Microsoft for downloads.  I do not know what download sites are safe or spoofs.

Please plain English ... i.e. go to settings etc.  Or just give me a Microsoft approved site for download.
Dez/MJD

https://social.technet.microsoft.com/Forums/en-US/200fc460-641e-495a-82c9-963752076918/windows-10-asus-laptop-want-caps-lock-and-num-lock-indicators?forum=w7itprogeneral
Relevancy 40.42%

My friends dv7-1135nr is not posting. The num lock and caps lock led light will flash once every 2 seconds at the same time. According to HP this issue is a " not functional" cpu. I am ordering another cpu for 16.00 off ebay because this is cheaper opposed to ordering another board. Anyone else have this issue? And if so did you fix it ?
 

Relevancy 40.42%

Hi new to these forums hope I don't break any rules or anything here My laptop is a Sony Vaio - Model SVE R L Product name SVE CXB Pre-loaded with Windows x Intel R Core i - M CPU GHz GB RAM w GB HDD space Purchased in Navy Exchange last year around July I have dropped it once or twice from at most a ft fall inside a padded case I mostly use my computer for school work some gaming extensive video photo editing internet browsing I've installed some debatable programs but have been installed long ago Most of my programs included Microsoft Office Adobe suite Steam iTunes uTorrent Cursor/num/cap Screen Windows Lock work lock Stuck, 8 McAfee VirusScan Enterprise Winrar VLC etc But are now gone due to the refresh I had just done last week for prior problems but still experience problems I recently been Windows 8 Lock Screen Stuck, Cursor/num/cap lock work having issues with my computer where it just won't respond at all Like today I had it working for a few hours but then went out and left my laptop on the lock screen and came back to it Windows 8 Lock Screen Stuck, Cursor/num/cap lock work being completely stuck Completely stuck as in no keys or clicks would unlock the screen to the login prompt However my cursor was fully able to move around the screen and my caps num lock buttons work as they display the lights enabling disabling them The time when it was stuck was pm but the clock was stuck on But on the bottom of the front of the laptop the HDD orange light is not lit up at all which I believe suggest that the HDD is not reading properly reading Oddly enough when I unplugged the power cord the HDD light flickered a little then disappeared still no response - could be related to the PSU I suppose Another problem I faced before was the Windows update failure resulting in reverted changes etc I also had problems in the first few months of owning this but found it was the incompatibility of an old antivirus that I guess didn't work too well with Win causing me to have to do a full wipe before That was long ago Moreover the problems I have been experiencing have been unresponsiveness from what I believe are the fast boot Win provides but I turned that off issues with Win not being able to load drivers from sleep mode upon opening the laptop turned off automatic sleep and now with the lock screen being stuck I know my problems aren't detailed but maybe these problems are linked to a bigger similar problem that people have been facing My last bet would be to do a full factory restore repair although I don't have a Windows boot CD Thanks for your time

A:Windows 8 Lock Screen Stuck, Cursor/num/cap lock work

Sounds like one too many drops killed the computer. You may get lucky and find a local mom & pop shop that will fix it cheaper then Sony.

http://www.eightforums.com/general-support/50498-windows-8-lock-screen-stuck-cursor-num-cap-lock-work.html
Relevancy 40.42%

Caps lock and scroll lock blinking, will not boot up 

A:caps lock and scroll lock blinking, will not boot up

Hi, Can you match the sequence of 'blinks' to those shown in the table below.  Can you post back with the full Model No. and Product No. of your notebook - see Here for a guide on locating this information. Regards, DP-K 

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/caps-lock-and-scroll-lock-blinking-will-not-boot-up/td-p/2928605
Relevancy 40.42%

After installing windows 10 I no longer get the Caps Lock & Num Lock hot key indication on the screen for my Think Pad E550. 










Solved!
Go to Solution.

A:Hot Keys for Caps lock/Num lock indicator dont wor...

Hi DBooker,
 
Welcome to Lenovo Forums!
 
Try uninstalling and reinstalling the hotkeys from the device manager.
 
Please let me know whether the above step helped you.            
Thank you, have a good day.
 
Did someone help you today? Click on the ?upper half star? at the left side of the post to thank them with a Kudo!
 
Regards,
Naveen.v

https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Hot-Keys-for-Caps-lock-Num-lock-indicator-dont-work/td-p/2236874
Relevancy 40.42%

I went to get my HP dv Pavilion laptop after work tonight to check email and i opened it up and moved around the mouse to wake it up the lights on they keyboard all came on as Caps blinking and and not... Scroll/Num battery LED's Lock Lock if it were starting but the screen stayed black I waited a few minutes because sometimes it's been known to take a few seconds to actually kick on but nothing happened Scroll/Num Lock and Caps Lock LED's blinking and battery not... so I forced shutdown by holding Scroll/Num Lock and Caps Lock LED's blinking and battery not... the power button Turned it back on and the screen came on with a your system didn't shut down properly error screen but it still started but now the Caps Lock and Scroll keys had blinking lights on the side and top blinking together about every second I tried tapping the buttons and nothing happened What caused this and how can i get rid of the blinking I've read from doing a google search that shutting down taking the battery out and unplugging from the A C adapter and holding the power button for seconds takes care of the problem but I would like to make sure that is safe before trying as this is a fairly new laptop just got it at Christmas time I'm running Windows if that makes a difference nbsp would also like to add that I just noticed that my little batter icon says it is plugged in but not charging it's sitting at this is a brand new ac adapter that I just got last week so I hope it's not that Thank you for any help you can give me and sorry if this isn't the right forum it seemed to be the best fit

A:Scroll/Num Lock and Caps Lock LED's blinking and battery not...

In order to help you further, could you please provide us with more information about your computer? Please post the specific model number or the (PN - Part Number) from the white tag on your computer. This will help us locate drivers and identify correct parts for your specific model. Make sure you've got the latest HP system BIOS installed.

http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Scroll-Num-Lock-and-Caps-Lock-LED-s-blinking-and-battery-not/td-p/303391
Relevancy 40.42%

Hi im using a Packard Bell butterfly touch and until recently this had been my linux machine with my full size laptop running windows however with windows I decided id utilize the touchscreen on this machine and have a swap around Replaced Ubuntu with Windows fine however now on some of my keys the fn key is reversed Ive included a picture to show which keys The keys affected imply that number lock is on however it is not and i have ensured so using registry editor Button number scroll fn lock/ lock) Reversed (not stick keys is not on either Any help much appreciated as this is driving me mad and makes typing very awkward cheers kez Tech Support Guy System Info Utility version OS Version Microsoft Windows Pro bit Processor Genuine Intel R CPU U GHz Intel Family Model Stepping Processor Count RAM Mb Graphics Card Mobile Intel R Series Express fn Button Reversed (not number lock/ scroll lock) Chipset Family Microsoft Corporation - WDDM Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB Motherboard Packard Bell SJM -MS-CAP Antivirus Windows Defender Disabled nbsp

https://forums.techguy.org/threads/fn-button-reversed-not-number-lock-scroll-lock.1077417/
Relevancy 40.42%

I have a Vista home premium Thirty Two bit on a HP DV Six Thousand laptop.
A few days ago, I have no idea how, but the scroll lock has been turned on. This is also the num lock key. so now my down and right arrows don't work and neither do my number keys, except numbers 6 and 5. Please help. The signs that are doubled up with the number keys don't work either since the num ock is on. This is so frustrating. How can I turn this scroll lock / num lock key off?
Thanks in advance.

A:Unlock Scroll lock / Num lock keys on HP DV 6 Thousand

Welcome
How to Activate the Scroll Lock on an HP Pavilion DV6000 Laptop | eHow.com

http://www.vistax64.com/general-discussion/285862-unlock-scroll-lock-num-lock-keys-hp-dv-6-thousand.html
Relevancy 40.42%

I have an HP Pavilion Laptop that is about 2 years old. I usually keep it in Hibernate mode but last night I shut it down totally and this morning woke up and the Caps lock and Num lock keys are blinking. Any clues as to what the problem is? All led lights on top are lit. Screen does not come up at all. I am going to try the hard reset to see if that is the problem. Any ideas would help.
 

A:Hp Pavilion Blinking Caps Lock and Num Lock keys

Hi, Welcome to TSG forums!
You might try booting it into safe mode....while computer is booting, continously tap the F8 key. This should open it in safe mode. If it does, use the arrow keys to move up to 'last known good configuration' click on enter, let the machine do its thing.
Let us know how it goes
Vicks
 

https://forums.techguy.org/threads/hp-pavilion-blinking-caps-lock-and-num-lock-keys.991267/
Relevancy 40.42%

Hi, i've been reading through an endless amount of forum threads to figure out how to remove this caps lock indicator and have not been able to fix my problem. It seems every solution in the control panel does not fit, and no matter how much i look in Registry Editor I can't find the right folders. I don't have the Widcomm folders.  This is what I have tried. 1. unchecking any caps lock indication in the control panel.2. Looking through Registry Editor to delete/rename/alter files.3. Deleting and re-installing Lenovo Energy Manager. How is this problem fixed for me?  I am running windows 10, and a rather new Lenovo Y50 laptop

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Remove-Caps-lock-Num-lock-indicator-Lenovo-y50-Laptop/td-p/3352479
Relevancy 40.42%

Good afternoon,

I just did a clean install of 7 to fix errors with my laptop, and it fixed one, but not the other main issues,
My caps lock, and number lock button on the keyboard don't have a light on it and the pop up that is supposed to pop up doesn't show up on screen.
I figured by doing a clean install it would all magically appear again... I was wrong, I have tweaked everything I could think of looking/trying to change setting from the keyboard in control panel, (including messing around with ease of use) and Gateways so called "support" area was of no help, as well as googling the issue has led me down a path of useless tips, I have also looked on this forum for help.

Any help in this area would be GREATLY appreciated!!

A:Caps Lock/Num Lock, on screen pop up gone Gateway NV77

Ok, I have a problem I have set up the sound, and it does not play a sound.

http://www.sevenforums.com/general-discussion/340787-caps-lock-num-lock-screen-pop-up-gone-gateway-nv77.html
Relevancy 40.42%

How do I get rid of the gray lock beside the irs.gov website and turn it into a green lock?
There are many websites referenced to tell one what the gray lock means, but none to tell you how to get rid of it.  Please help!

https://social.technet.microsoft.com/Forums/en-US/bc2ad542-9ddf-482d-83cc-373418c7f1c3/how-do-i-get-rid-of-the-gray-lock-beside-the-irsgov-website-and-turn-it-into-a-green-lock?forum=ieitprocurrentver
Relevancy 40.42%

Hiii there, I have just locked my personal folder through Priyan's lock but unable to unlock it again. An icon of Control panel is being shown instead of default icon. and when I am opening it, control panel window is shown. What to do? ***email removed*** It will be a great help as this folder contain very important personal documents. Please reply asap.
 

Relevancy 40.42%

ANyone have aclue how to get these working again  i did a clean install of windows and for the life of me can't get these to work I've installed all drivers from the drivers page with no luck

https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/On-screen-display-caps-lock-num-lock-trackpad-enable-disable-not/td-p/3336868
Relevancy 40.42%

   Hi,I have an inspiron 9400 that has been having some issues lately.  As of right now, when I push the power button, the power light comes on but it does not boot or even post.  The Num lock stays on and the caps lock and scroll lock lights blink for about 40 seconds then the whole thing shuts off.  This can obviously be only a few things but, how to I figure out what those blinking lights mean.  I have search dell support but have found nothing.  Any help is greatly appreciated. Thanks 

A:blinking Caps lock and Scroll lock/ no boot up

Try reseating your RAM securely in their slots.  I have read that blinking of any of the lock indicators is a sign of memory failure.

http://en.community.dell.com/support-forums/laptop/f/3518/t/18956826
Relevancy 40.42%

I have an Athlon 650, 512 MB PC running Windows 2000 server edition running Internet Connection Sharing (for cable modem), and IIS 5.0 for several web sites. I also use it as a file server. I usually leave it just sitting there and just update things every once in a while. I don't even have a monitor hooked to it. Should I hit CTRL-ALT-DEL and click the "lock computer" or log out? Would this make it more secure somehow to hacks? I haven't had any problems yet, but I just want it secure as possible.

Any help would be appreciated!
Thanks,

Cory
 

A:Win2K server - ICS, IIS, etc... - should I lock the PC - CTRL-ALT-DEL -Lock computer?

According to what microsoft says, Yes, it will provide an added layer of security.
 

https://forums.techguy.org/threads/win2k-server-ics-iis-etc-should-i-lock-the-pc-ctrl-alt-del-lock-computer.50944/
Relevancy 40.42%

Hi. I recently bought a new R5-417T laptop, and in the process of personalisation found no intuitive way to disable the caps-lock or num-lock notifications. (Windows 10 btw)  ^Notification in question^ How would I go about disabling this? I've tried looking in the BIOS, in regedit and some mythical "Launch Manager" program bundled with older acer laptops that I can't find a working version for.

A:How to DISABLE Caps-lock and Num-lock screen notif...

Caps lock is thr Caps lock key.For Num lock try Fn and F11.

http://community.acer.com/t5/S-and-R-Series-Laptops/How-to-DISABLE-Caps-lock-and-Num-lock-screen-notifications-on-my/td-p/419415/jump-to/first-unread-message
Relevancy 39.56%

When you choose lock the taskbar it does stop you from resizing sections of it but it doesn't stop you from doing other things like re-arranging icons in the quicklaunch folder Is there any way I can lock the icon layout in quicklaunch Sometimes I might accidentally drop something in there when I meant to be dragging it to do an quot open with quot or I really truly the I "Lock lock can Taskbar" how lock doesn't it, it? might accidentally click as I'm moving my mouse over the icons and it drags an icon to a different position and I have to figure out where to drag it back to and in the most bizarre Windows feature ever if I then shutdown and startup despite having moved that icon back to it's original position after startup it'll be back to the wrong position that it only spent seconds being in by mistake Currently I "Lock the Taskbar" doesn't really lock it, how can I truly lock it? just have a screenshot of my icons and have to use that as reference to keep "Lock the Taskbar" doesn't really lock it, how can I truly lock it? them in the places I want them Example imgur com UjltgAh

A:"Lock the Taskbar" doesn't really lock it, how can I truly lock it?

This seems like it will do what you want if the bottom icon is considered the thumbnail but I think they mean the aero peek thumbnail.
http://rammichael.com/7-taskbar-tweaker

http://www.sevenforums.com/general-discussion/401635-lock-taskbar-doesnt-really-lock-how-can-i-truly-lock.html
Relevancy 39.56%

When you choose lock the taskbar it does stop you from resizing sections of it but it doesn't stop you from doing other things like re-arranging icons in the quicklaunch folder Is doesn't it, how can the lock "Lock truly it? really I lock Taskbar" there any way I can lock the icon layout in quicklaunch "Lock the Taskbar" doesn't really lock it, how can I truly lock it? Sometimes I might accidentally drop something in there when I meant to be dragging it to do an quot open with quot or I might accidentally click as I'm moving my mouse over the icons and it drags an icon to a different position and I have to figure out where to drag it back to and in the most bizarre Windows feature ever if I then shutdown and startup despite having moved that icon back to it's original position after startup it'll be back to the wrong position that it only spent seconds being in by mistake Currently I just have a screenshot of my icons and have to use that as reference to keep them in the places I want them Example imgur com UjltgAh

http://www.sevenforums.com/performance-maintenance/401635-lock-taskbar-doesnt-really-lock-how-can-i-truly-lock.html
Relevancy 39.56%

Hello All,
I am talking about an encryption software that can lock folders and files on windows XP. The version is Folder Lock 6.1.7.

I want to know if it is possible to lock files currently being downloaded from my browser (i.e. Can my browser access the files and add parts to them and at the same time, can the files be protected?)

Thank you
 

A:Folder Lock 6.1.7 - trying to lock downloading files

You might be able to find a browser add-on, but I personally haven't heard of anything you can use. You need the files on the computer before you can encrypt them.

Before you decide to use a program like Folder Lock, I would suggest you search this site for "folder lock" threads and read about all the people who have lost files with that program.
 

https://forums.techguy.org/threads/folder-lock-6-1-7-trying-to-lock-downloading-files.820944/
Relevancy 39.56%

Dear team nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp I have HP Probook s Laptop My laptop working fine But Caps lock light is not glowing I cant understand the if caps lock its on or off Kindly please provide the solution for this problem nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Thanking you nbsp nbsp nbsp nbsp nbsp lock lights lock glowing not Caps num and nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Caps lock and num lock lights not glowing nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp With regards nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp S Ajith nbsp

http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Caps-lock-and-num-lock-lights-not-glowing/td-p/5820106
Relevancy 39.56%

--

Hello.

I need a mouse lock / pointer lock button on my website like this one called Interactive Example in the link.
Work only in FF or chrome.

http://www.html5rocks.com/en/tutorials/pointerlock/intro/

I can't find the script in the web page so maybe you can find it?
Or can anybody tell me how to get a Mouse lock / pointer lock script that generate the mouse coordinate view?

Regards MagI
--
 

https://forums.techguy.org/threads/mouse-lock-pointer-lock-button.1097027/
Relevancy 39.56%

I need help I will explain when I believe the problem began I Had windows xp running with harddrives and a Cdrom drive My CdRom drive began to give me problems so I was going to swap it with one from one of my other computers At the same time I wanted to change the way I had all my drives connected I had originally had the gig drive as a all Caps Scroll Lock up!!?? lit NumLock Lock & Primary Master with a smaller drive acting as the Slave I also had the Cdrom as Master Secondary drive and a smaller drive attached as the Slave Now everthing was running NumLock Caps Lock & Scroll Lock all lit up!!?? fine exept that my cdrom drive would read the discs only if it would start up with the disk in the drive If I tried to change it windows would ask me to place a disk in the F drive when there already was one I thought to replace the CdRom drive with another working device while at the same time I decided to change up my Connections I took the quot new quot cd rom drive and made it Slave Primary to the Master Gig drive then I took the two smaller drives and put them together as sencondary devices when I tried to turn on the computer all that happens is as soon as I touch the power my lights on my keyboard come on Num Lock Caps Lock and Scroll Lock I know the drive is turning on because I can feel amp here it wirr I tried taking everything off except for the gig drive and I still got the same problem Later on I noticed that there are a bunch of smaller connections that come from the front of my computer power sleep and reset buttons I saw that of these switches was not connected It may have already have been that way or not Im not sure I read the words on the cable and they say Sleep so I dont think that this could be the case If it is I need to know where it is supposed to connect to If not can somebody please give me a website or some info on what I can do Thank I apprecciate your patience in reading my long message nbsp

Relevancy 39.56%

Ok I've been suffering this issue with Windows for as long as I can remember and it's stopping me using it as the primary OS In short I have two intermittent issues which nothing I do seems to resolve After waking up from sleep and typing my username Being tortured lock lock absolutely screen ups...please help! by password and hitting return the screen goes black Cursor moves Windows P operates Screen options do appear from the right but doesn't actually make any Being absolutely tortured by lock screen lock ups...please help! difference and I'm stuck having to hard reset because ctrl alt del doesn't work either This isn't an every time issue hence googling seems to fail miserably because all the examples are people getting it every time This for me is a in regularity Logging a user off occasionally sees the lock screen locking up Ironically Mouse moves and power button DOES work but Being absolutely tortured by lock screen lock ups...please help! that's all Being absolutely tortured by lock screen lock ups...please help! that works These issues are plaguing me and I just cannot fix them - endless googling has left me empty handed and I've tried disabling SLI No help I've tried disabling apps No help Nothing I do makes any difference and event viewer doesn't seem to reveal anything useful either Anyone got any idea how I can resolve this System is GB SSD OCZ TB Seagate HDD K x Ti SLI GB RAM Corsair Asus Z -A Windows amp Windows dual boot

http://www.tenforums.com/bsod-crashes-debugging/56122-being-absolutely-tortured-lock-screen-lock-ups-please-help.html
Relevancy 39.56%

Hello! Recently, I turned on the on screen indicators for caps and num lock by accident when trying to get the pop-up window to stop opening every time I hit one of the buttons. Now I don't know how to disable it, and it's a pain while playing games. Solutions tried:Going to preference, there is no "On-Screen Display Tab"Going to run the regedit. Any help would be appreciated!












Solved!

Go to Solution.

A:Y50 Remove Caps lock/Num lock indicator?

hi Vilvern,
 
Welcome to Lenovo Community Forums!
 
AFAIK,
  If the system does not have CAPS OSD under Control Panel / Uninstall a Program to uninstall
You will need to Uninstall the Lenovo Energy managemenr Under the Programs / Uninstall a program.
 
Regards
Solid Cruver




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y50-Remove-Caps-lock-Num-lock-indicator/td-p/1627994
Relevancy 37.84%

I recently upgraded to Windows 8.1, but it reset my custom lock screen image.  I tried re-applying it but the lock
screen preview in the settings is stuck on a load loop.  Does anyone know why that is and why it won't set my custom image as the new lock screen image?
i can't find the  C:\ProgramData\Microsoft\Windows\Systemdata, folder,
in my laptop
how to get default lock screen images in 8.1? plz help me..

A:Lock Screen Custom Image Stuck on Load for Windows 8.1, (Can't see the default lock screen images)

Please take a look at this link and it should solve your problem.
http://www.eightforums.com/tutorials/29621-start-screen-set-default-background-image-windows-8-1-a.html

https://social.technet.microsoft.com/Forums/en-US/686a7601-7dc5-48d1-8cc4-9256deefeaa4/lock-screen-custom-image-stuck-on-load-for-windows-81-cant-see-the-default-lock-screen-images?forum=w8itprogeneral
Relevancy 37.84%

I am using Folder Lock and am TRYING to Password protect my files documents on a CD I am using Windows I have managed to get Folder Lock a Lock lock Folder to 5.8.0 CD Solved: onto the disk and password protected the locker I thought I made the disk on my main desktop took the disk to my laptop which also runs Windows and everything seemed Solved: Folder Lock 5.8.0 to lock a CD to work fine Next I took the disk to an older desktop that I have with Windows XP on Solved: Folder Lock 5.8.0 to lock a CD it I thought it was fine at first but after playing around a bit I changed the properties of the folder to quot show hidden items quot With that option you can quot see quot the locker BEFORE you have to put the password in and it will open for the documents files to be seen What am I doing wrong Anyone with the least bit of computer knowledge could view my files if they got their hands on the CD Is there a quot better quot way to accomplish what I am trying to do Thank you kelly nbsp

Relevancy 37.84%

When I hit the power on button on my computer, it takes anywhere from five minutes to eight hours to start up. While starting up, and while running, the CAPS lock and NUM lock lights flash once about every 2.75 seconds.

I looked up the HP error codes, one flash is supposed to signify a CPU problem...but I can run Half-life 2, WoW, Runes of Magic, and 8 track Guitar Pro 5 files just fine. So I figure my CPU's (AMD Turion x2 dual core @ 2.0 Ghz) got nothing wrong with it.

I've spoken to HP support, they told me to reimage my computer to factory settings...I've done that, twice....flashed the BIOS...and tried running startup repair....any hints?

http://www.techsupportforum.com/forums/f217/hp-dv7-num-lock-and-caps-lock-flashing-437528.html
Relevancy 37.84%

My notebook caps lock and num lock blinking 3 times, restart and blinking continuously

http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Caps-lock-and-num-lock-blinking/td-p/5663192
Relevancy 37.84%

Hello, i had problem. My Num lock and caps lock indicator didnt appear at desktop windows 7 ultimate. I already uninstall Energy Management and re install back, but didnt work. But for any hotkey like volume, brightness, FN + F 1 until F 12 WORK good. And for information, i dont have TAB on screen display (control panel - display - change display settings - advanced setting - ) Please help me with this problem. I already stuck with problem. thank u

https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Please-Help-My-Num-Lock-Caps-Lock-Lenovo-G-480-Didnt-appear-in/td-p/3445442
Relevancy 37.84%

Hi! So, I've upgraded to Windows 8 RTM this weekend and I'm having this problem: Every time I boot the PC (shutdown or restart), the Num Lock key is off. Since my password uses numbers, and I'm pretty used to type it with Num Lock, I'd like to keep it always on. It was fine on Windows 7. Now, I've searched for it, and there is the "InitialKeyboardIndicators" key on regedit. I have changed values for all of them to "2", and it didn't work. My BIOS say to keep it always on. Is there anything else that I'm missing?

A:Num Lock always activated on lock screen

Netplwiz, or tap num lock before starting password entry.

Besides those, you can check to make sure keyboard is plugged in directly to motherboard instead of add-on card or something.

http://www.eightforums.com/general-support/8813-num-lock-always-activated-lock-screen.html
Relevancy 37.84%

Caps lock and Num lock reversed

On my new Gateway ML6720, the caps lock and num lock are OFF, but my caps lock and num lock lights are on. And vice versa. I don't remember it being that way this morning when I first turned it on.

Why are the lights reversed from what I expected?

Thanks.
 

A:Caps lock and Num lock issue

Since it is New, I would call Gateway. They will have knowledge if this is a problem with the ML6720 model.
 

http://www.techspot.com/community/topics/caps-lock-and-num-lock-issue.94604/
Relevancy 36.98%

Trying to figure out if this is a problem with the lock or the port any advice or help appreciated.

http://en.community.dell.com/support-forums/laptop/f/3518/t/19992135
Relevancy 35.26%

Hello guys I own a Y50-70,When i press caps lock or numlock while i'm on a game, the "caps lock is on/off" alert minimalize the games. It's so annoying whenever i try to write capital letters or accidently press the caps lock instead of the LSHIFT or TAB, the game minimalize and causes me to die etc. Btw there is no On-Screen Display tab in the display settings.Sorry for my bad English, i tried my best. Thanks in advance:<Good days.?

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Caps-Lock-and-Num-Lock/td-p/3391339
Relevancy 35.26%

Hi,

I am sure that everyone knows that you can lock your account in XP, blah, blah.

But if I am doing something important, I don't want other administrators to be able to log me off!

Is there a registry key/local poicy/other solution so that only I can unlock my account when I lock it?

Danny
 

A:Lock my account - no - really - LOCK

Not that I know of. Do you really have problems with other administrators logging you off? I'd address that issue on a people to people basis.
 

https://forums.techguy.org/threads/lock-my-account-no-really-lock.568326/
Relevancy 34.4%

Unable to release quot Caps Lock quot in Windows Only With quot Shift quot key HELP please I recently had a power serge that frying of my internal TB sata hard-drives After removing it and running some test to see if everything was ok other then that drive I noticed my Caps Lock key was freezing on I tried swapping it with another USB keyboard still the same problems then I tried swapping it with a PS keyboard still the same Lock Caps key Caps Solved: with Releasing Lock not issues I can release the caps by pressing ether SHIFT key I m Currently running Windows Vista Ultimate bit Valid gb Ram TB of Disk space Post a comment if more info is needed But I think this is more then enough info to help answer the question I would really like to not have to press SHIFT every time to release the Solved: Caps Lock not Releasing with Caps Lock key Caps Lock key Thank you if anyone can help this issue p s I ve tried reinstalling the drivers amp uninstalling from Device manager nbsp

Relevancy 28.38%

i did a scan with AVG and the pop-ups and lock-ups help! one thing it found that looked odd was trojan horse SHeur AXX but it locked up at the end and wouldnt let me do anything with it here is my hijack log HELP Logfile of Trend Micro HijackThis v Scan saved at AM on Platform Windows XP SP WinNT MSIE Internet Explorer v Boot mode Normal Running processes C WINDOWS System smss exe C WINDOWS system winlogon exe C WINDOWS system services exe C WINDOWS system lsass exe C WINDOWS system svchost exe C WINDOWS system svchost exe C Program Files Lavasoft Ad-Aware aawservice exe C WINDOWS Explorer EXE C WINDOWS system spoolsv exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C PROGRA AVG AVG avgwdsvc exe C WINDOWS system crypserv exe C Program Files M-Audio M-Audio Series pop-ups and lock-ups help! II MIDI MA CMIDI Inst exe C WINDOWS system nvsvc exe C WINDOWS pop-ups and lock-ups help! system PnkBstrA exe C WINDOWS system PnkBstrB exe C WINDOWS system svchost exe C PROGRA pop-ups and lock-ups help! AVG AVG avgrsx exe C PROGRA AVG AVG avgemc exe C WINDOWS System MAFWTray exe C WINDOWS system RUNDLL EXE C WINDOWS system rundll exe C Program Files Internet Explorer IEXPLORE EXE C Program Files Trend Micro HijackThis HijackThis exe R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch O - HKLM Run M-Audio Taskbar Icon C WINDOWS System MAFWTray exe O - HKLM Run MAFWTaskbarApp C WINDOWS system MAFWTray exe O - HKLM Run amd dc opt C Program Files AMD Dual-Core Optimizer amd dc opt exe O - HKLM Run QuickTime Task quot C Program Files QuickTime qttask exe quot -atboottime O - HKLM Run NvCplDaemon RUNDLL EXE C WINDOWS system NvCpl dll NvStartup O - HKLM Run nwiz nwiz exe install O - HKLM Run NvMediaCenter RUNDLL EXE C WINDOWS system NvMcTray dll NvTaskbarInit O - HKLM Run acd a rundll exe quot C WINDOWS system fxuxcvlo dll quot b O - HKCU Run gadcom quot C Documents and Settings steve poole Application Data gadcom gadcom exe quot A B BBF B B E C C A E C A O - Extra button no name - B E C - FCB- CF-AAA - C - C Program Files Java jre bin ssv dll O - Extra Tools menuitem Sun Java Console - B E C - FCB- CF-AAA - C - C Program Files Java jre bin ssv dll O - Extra button no name - e e dd -d - - b -f ba - C WINDOWS Network Diagnostic xpnetdiag exe O - Extra Tools menuitem xpsp res dll - - e e dd -d - - b -f ba - C WINDOWS Network Diagnostic xpnetdiag exe O - Extra button Messenger - FB F -F - d -BB E- C F - C Program Files Messenger msmsgs exe O - Extra Tools menuitem Windows Messenger - FB F -F - d -BB E- C F - C Program Files Messenger msmsgs exe O - DPF E F - B - D - - BD D PCPitstop Utility - http www pcpitstop com betapit PCPitStop CAB O - DPF B-B - D-A D -FCFDF E C WUWebControl Class - http www update microsoft com win ls en x client wuweb site cab O - DPF A F DC- A B- D - F -A AD EEE System Requirements Lab - http www nvidia com content DriverDownload srl sysreqlab cab O - DPF D CDB E-AE D- CF- B - Shockwave Flash Object - http fpdownload macromedia com get shockwave cabs flash swflash cab O - Protocol linkscanner - F C- F - D -A D -FBDDE F D - C Program Files AVG AVG avgpp dll O - AppInit DLLs avgrsstx dll qnqbtf dll O - Service Lavasoft Ad-Aware Service aawservice - Lavasoft - C Program Files Lavasoft Ad-Aware aawservice exe O - Service Apple Mobile Device - Apple Inc - C Program Files Common Files Apple Mobile Device S... Read more

Relevancy 28.38%

Alright what has been happening for Lock-ups the last few months is when I played games like World of Warcraft for a long period of time my dcard would flip out and my screen would turn into like green snow like what you see on the tv except its black and white and it has a distinct pattern to it and it continously moves After this happened enough times I reached down and felt my dcard it was VERY hott it obviously overheated I decided to buy an external fan and Lock-ups place on the outside with the side panel off so it can blow into it on High its a very high powered fan My dcard now dose not have problems like it did before Now when Lock-ups I play games my whole pc will lock up I ran a memtest name is probably incorect and my ram seemed fine passed everything Please help me solve my problem Windows XP Home MB RAM x Corsair AMD Athlon XP MOBO Chipset nVIDIA nForce Radeon AIW nbsp

Relevancy 28.38%

At completely random intervals(e.g. 2 minutes, 3 hours, sometime during the day/night), the computer 'locks me out' - the screen remains visible but the mouse is 'frozen', the keyboard will not function, any discs in their slots will not release.The system will restart with no apparent problem until the next lock out.
I've had a systems check done at the local shop and they are fairly certain that the hardware is not causing the problem.
Is this a known/common occurrence? Help please!!
 

A:Lock out

Welcome to TSG, billib!

Are you doing anything specific when the lockout happens?
 

https://forums.techguy.org/threads/lock-out.517941/
Relevancy 28.38%

Hi-
Is there a program or software like cpulock(http://www.cpulock.com/) that I could get for free?