Hi My Hp Pavillion is only Years and months old not very old at all but suddenly it will not boot into Windows it freezes at the HP logo screen it boots to a HP logo screen then goes to another HP Windows ye... HP 2 Pavillion - boot PC2170 Notebook not 15 Does logo screen then freezes I cannot get into safe mode HP Pavillion 15 Notebook PC2170 Does not boot Windows - 2 ye... nbsp I have got into the Hp diagnosis screens and I have ran tests on everything and everything has Passed I did a HP Pavillion 15 Notebook PC2170 Does not boot Windows - 2 ye... hard reset still froze I removed the memory cover took it out and placed it back in still nothing Every time I try and reset it it says Administration Privileges is needed but there are no administration privelges on this computer There are no restore points I ran chkdsk through the command prompt and got no errors I tried to run sfc scannow but I got that their was something pending and it could not do it nbsp The notebook is HP Pavillion Notebook AMD A - APU processor nbsp Can anyone computer whizz out there shed some light on this problem please thank youhttp://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/HP-Pavillion-15-Notebook-PC2170-Does-not-boot-Windows-2/td-p/5734807
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
I have recently somehow disabled my windows key. I have tried going to Microsoft and doing the "Fix it" thing for the registry and it does not work. I have tried this numerous times. Could it possibly be the keyboard I'm using? It use to work however with the same keyboard. I use Avast Anti-Virus, Malwarebytes and iObit system care as my general cleaners. Not sure if any of those have a default setting to disable the button. Thoughts / Suggestions please?!?!
Do you mean Windows is asking you to activate again? What version of Windows are you running?
Power outage due to storm. Came back on without pictures and documents. It's an HP desktop. Would a file recovery program work? I've tried some of the instructions online, but they don't work.
Oh mary; I feel your pain. Were the pics within one folder and now they're ALL missing?
I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).
IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
I have a Soundblaster Z on my PC that was working fine until I upgraded to Windows 10 today. Now the sound still works but sounds like there is hardly any treble at all. It sounds like singers in songs are singing in a tunnel or something. You can't hardly make out what the vocalist is saying over top of the background music.
Can someone please help me fix this!?!?!?!?!
Not yet maybe. According to Creative's website, drivers for Soundblaster Z will be available in August 2015. It doesn't say exactly when though.
Following yesterday's worldwide launch of Windows 10, all three major GPU vendors have released new graphics drivers that support Microsoft's new operating system. If you're upgrading to Windows 10, make sure you download and install these drivers soon after launch.
Is AMD planning to release Windows 10 drivers for RadeonHD234k cards too? Are those machines stuck with Windows 7?
hi all I tried taking battery off tried just charger etc but wont turn on could someone help on where to start to try find problem its got no hard drive in it as I bought it 2nd hand with out a hard drive in it .. thanks in advance
Do you see anything on the screen when you switch on? Any fan noise? It should start briefly then find the hard drive missing, as long as there is power(?)
I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help
Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
The second quarter of 2015 saw the sharpest decline in global PC shipments in close to two years and once again serves as a reminder that last year's brief resurgence was little more than a fluke.
Nobody needs to upgrade every three years now. You can easily hold your hardware for up to 10 years if you really want to.
I can not find any DirectX compatible graphics when I try to play the Sims 2 for the Windows XP. Please Help Me! But I do not have any internet though.
Try this page for help and then let us know what the outcome is.
I have previously on a different PC recorded the stereo mix in Audacity, whilst playing a CD and would get the full frequency range of the CD. On my current PC I now get a 20khz cut off, despite changing the settings (the sample rate and bit despth) on the playback and recording devices in Windows and also in Audacity. Does anyone know why this would be, and if there is any way of correcting it?
Okay so for the past several hours I ve gone through the throes of attempting to get my Asus laptop s built-in webcam to work I took a on laptop cannot Windows 7 webcam the built-in Asus detect my look at Device Manager and had found two items titled quot Base System Device quot or something to that effect I don t quite remember and I thought that one of them would be the webcam Well after searching for the mystery items Hardware ID on Google I had Windows 7 cannot detect the built-in webcam on my Asus laptop discovered that these devices were in fact not the webcam Then I had used the quot Add a Device quot option under Devices and Printers in the Control Panel to try and find the webcam After letting it churn for ten minutes it appeared that Windows wasn t even searching anymore and I was staring at a blank window for nothing The only clue I have about the situation is after running DriverEasy it listed quot USB M UVC WebCam quot as a needed update but it also said quot unplugged quot beside the selection and was highlighted in red After attempting to download and install the driver the program had given me some Packard-Bell webcam driver that is most definitely not correct Packard-Bell still exists This had all started however when I made a clean install of Windows I had just spent the last two days scouring the web digging up my lost drivers and programs that had come with the laptop Everything s been successful save for this one element My webcam is lost somewhere in my laptop I just can t get to it If anyone has any ideas as to what s happened and yes I know it s a possibility the wiring is shot and how to fix the issue please give me any tips that you can I ve done everything possible in my power including trying to find the drivers but you obviously can t install drivers for devices that Windows doesn t even detect Oh before I forget my laptop model is Asus x v B if that helps in any way nbsp
Was this laptop purchased with Windows 7 as the OS that was installed on it ? Or did it come with Windows Vista and you just wiped it out and put Windows 7 on yourself??
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
I'd recommend to do the following:
Perform a clean install of Windows
Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.
Let me know how it goes after you've tried what I've mentioned.
Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp
Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:
1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...
2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...
3. Start adding one piece of hardware at a time and repeat as directed.
What are your findings?
I'm trying to connect my PC and my Asus Zenfone 2 with Bluetooth. When I use the "add a device" wizard on Windows 8.1, my mobile phone is detected, but when I try to add it I get: "Windows doesn't have a network profile for this device".
Also, when I try to detect my computer with my mobile phone, itīs not detected.
I'm using a Trust USB 2.0 dongle Bluetooth adapter (the little one you insert on the usb port) that came with a keyboard and mouse Bluetooth set that I used. Could that dongle be designed only for the bluetooth keyboard and mouse set?
The Bluetooth device seems fine as it already detected your keyboard and mouse. However, your phone seems not supported with the current Bluetooth device and you might need to take another look.
Infinity displays are all the rage among notebook buyers these days. Dell's XPS 13 (2015) was an excellent example of what's possible when it launched earlier this year and now, they're bringing the gorgeous screen to its bigger brother.
What's an Infinity screen?... Short answers please, I'm not interested enough to Google it.
Hi all, my pc has been playing up for a while, it has gone through 3 CMOS batteries in the space of 5 months, but just now it has presented a new issue (could be related), with two sticks of RAM in, it posts and boots the os as normal... With 3 in, it will post and get through BIOS, but it starts loading OS and jumps back to BIOS again... Now with 4 sticks in, it wont even post... Are there any suggestions
My PC specs...
Penryn 1600SLI-110dB mobo
Intel quad core q6700
And (now only) 4gb ram
Try one stick at a time
Much of the tech press regularly overlooks PCs for wearables, smart homes, and IoT-related topics but, in the real world and to many people, PCs still matter a lot. So, this week's news out of Redmond and Taipei (where the...
No matter what others think about W10.
THIS is not a reason for an upgrade, if one has a choice.
Stay away from -remote host,-cloud centered OS.
Take your hardware and host your stuff by yourself.
Do not accept crippled OS (what unfortunaly OS X (since making iCloud a default location for files, belongs to).
Thanks for any help in advance..
I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..
I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.
Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.
Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
Hi I would appreciate if someone could help me please The problem I have has been going on since about the time I formatted my PC and reinstalled Windows Had issues with BSOD on install because of my graphics card seem to have been slighty dislogded See http www techspot com vb topic html Okey the problem is my mouse keeps freezing up after a while and after moving it or clicking a couple times it works again When this happens I get either a beep or the usb disconnect connect sound depending on which mouse is being used Current using Windows mouse issues freezing 7 Bluetooth Apple Magic Mouse connecting to a generic Windows 7 mouse freezing issues bluetooth dongle this makes a beep when Windows 7 mouse freezing issues it freezes The USB Wireless Logitech Dongle Logitech Mouse I had before this made disconnect connect sound The USB Wired Mouse before the Logitech also made disconnect connect sound I have tried to work around this using several methods but have had no luck Steps taken to try and rectify issue Changed mouse I am on my th mouse now I will not change for another again the mouse is not the problem Tried all the mouses on other computers where they all worked fine I have switched ports on numerous occasions all other device work with no problem keyboard touch screen monitor external hard drive s usb flash I have removed conflicting hardware and ensured only on mouse is plugged in also removed touchscreen cable from monitor I have gone to Device Manager and set USB Root Hub and Power Management tab and unchecked quot Allow the computer to turn off this device to save power quot on all devices I have removed drivers for all other mouse s used previously I have disabled C E as this uses some power saving methods I have check Event Viewer which only has networking errors which all forward to my network drive I have run System File Checker SFC sfc scannow I need to know whether Windows is the issue or whether its the usb ports Can anyone please help me as it is now really bothering me I can t even play Battlefield games Thanks nbsp
This is a problem I have not seen before. Try using this guide to find any other mouse drivers that you may not have deleted.
Ahead of tomorrow's launch of The Witcher 3: Wild Hunt, Nvidia has released a new GeForce graphics card driver that's Game Ready for the open-world action RPG. The GeForce 352.86 drivers are also WHQL certified, meaning they are stable enough for everyday...
Mine were updated hours ago, you just can't beat GFE for this sort of thing (or for game display settings optimisation as far as I'm concerned, it works for me).
I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
I have on same HD-500GB win7 and win xp. I conect another HD-320GB in sata drive. Bios recognize both HD, win 7 too, but win xp recognize only HD-500GB. When I go to disk manager in win xp it's same problem I only see one HD-500GB. Please help me.
I have just added a new SSD drive does recognize 1720 Inspiron in modular boot bay not BIOS sequence HDD in the modular bay of my Inspiron The SSD drive in modular bay is accessible if I boot using my normal harddrive or USB DVD-ROM drive for OS installation which I managed to install on the SSD drive Once boot using my regular HDD I can see the drive is set to Disk in Windows Disk Management And my other HDDs Inspiron 1720 BIOS does not recognize modular bay HDD in boot sequence as Disk and Disk I can boot thru HDD or HDD by selecting them in boot sequence However the SSD drive is not available as part of the boot sequence in the BIOS setup or F boot sequence The BIOS though recognize that there is an SSD drive attached Inspiron 1720 BIOS does not recognize modular bay HDD in boot sequence in modular drive bay My Inspiron is using the latest A BIOS and I could not find a way to include the SSD as part of the boot sequence The boot sequence works when I put back the DVD-ROM drive which boots without any problem with any bootable CD DVD Is there any way I can make the modular bay SSD bootable other than of course putting the SSD in the HDD or HDD caddy which some thing I do not wish to do Please help nbsphttp://www.techspot.com/community/topics/inspiron-1720-bios-does-not-recognize-modular-bay-hdd-in-boot-sequence.210955/
Hello I apologize in advance for my almost complete lack of computer knowledge That said my PC was built for me by one of the IT guys at work who has since moved on I can t scare him card Good with Windows 7? graphics compatible up from his last known email addy So I m sort of out there drifting on this stuff trying to find any help I can The PC is connected to the home theater system TV through HDMI About weeks ago and video from the internet stopped producing sound In addition the PC doesn t Good graphics card compatible with Windows 7? play audio dvds anymore And when I click on the samples in the library I can t play them either I m assuming without knowing the graphics card is shot I think it s about four years old I opened up the box pulled out the graphics card I didn t make a note of manufacturer model but my device manager says it s nvidia and the driver is up to date and cleaned it I plugged it back in still no sound I can play youtube videos or stream online content but none of it has sound Does it sound to you guys like I need a new graphics card If so I need a recommendation for a better than average one that is compatible with windows professional something in the range or so Any help would be greatly appreciated Thanks nbsp
Open up nVidia Control Panel.
Under Display select "Set up Digital Audio".
Verify settings to make sure they are correctly set up to send audio.
A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.
However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.
What can I do to fix this issue?
For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 220.127.116.11, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 18.104.22.168.
Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
I wonder if anyone could help me shed some light on the best process for the above subject.
I currently have a Dell Studio XPS 435MT (Vista 64bit) running two HDD's in RAID 0 (as from factory) I need to install Windows 7 64bit and would like to also install it onto the new SSD I have bought (Crucial 128GB) as an upgrade.
Could I simply take the current HDD's out (after backing up essential data) to keep safe as backup plan and add the SSD into slot 0 and install Windows 7?? Then possibly add say a 1tb storage drive to the system later?
One solution someone has sent my way is to clone the two 500gb RAID 0 drives to a single 1tb drive then install Windows 7 onto the new SSD and have both drives on a multiboot? Could this work?
I have seen/heard many versions of how to go about this install but no real evidence of a true way?
Any help would be much appreciated.
It takes 3-500GB drives to give you 1.3TB of storage space because of formatting over-head. 2-500GB drives will be considerably less than 1TB. Keep the 2-500's in a single RAID array and set the SSD as a separate partition for Windows 7
Is there a way to connect a displayport monitor to an IBM style PC? Found a new monitor in my brother-in-law estate and was wonder if there is a way to use it. Thanks for any help
If the monitor and the video card in u'r computer have the same connections, and u have a power cable for it. It should work if it is new as u say. Try it and see. That should not cost anything.
Hi all I have a problem thats been ongoing for months and I just cant get it solved so im hoping you can help The problem is that whenever someone speaks in teamspeak ventrilo skype insertvoiphere my game volume drops to almost nil This volumes game Windows ducking is not a problem tied to any individual app as ive been through all the individual fixes to no avail such as volume control plugin disabled etc And the fact that every single voip program does it leads me to it being a windows option somewhere I have also gone into the sounds gt communication and have that set to do nothing It still happens It is not just with Windows ducking game volumes game either I tried different games and the sounds on every single one duck out when someone talks Also another note it also ducks out when I click to run any program on my pc via admin You know when the box pops up asking you if you want to allow this program to make changes to your computer where you click yes When the box pops up and it goes quot beep beep quot at that exact moment the game volume ducks out note - its only ducking game volumes too it doesnt duck out media player youtube vids or anything like this Please please if anyone can help me solve this issue it would be so appreciated Thanks nbsp
I'm assuming that you are on Windows 7? Go to the sound icon on the bottom-right of the desktop, right click and select playback devices. Right click on your default device (Either speakers or an integrated chip set normally) and select properties. Go to the advanced tab and make sure that the Allow applications to take exclusive control of this device box is un-ticked.. and make sure that the give exclusive mode applications prioirty is un-ticked, then report back to see if it has worked (Don't forgot to apply and OK the changes).
Hi, a friend of mine has dropped off a Mac HD to recover some pictures for him. He supplied the HD and a ProBox HDF-SU2. This I would think to be plug and play but no matter what I do including swapping to known good USB sockets the ext dive is not being seen. Windows is not even offering to install a driver for the ProBox HDF-SU2. Any help gratefully received. TIA
Hi guys, I have set up a RAID 0 array using an XFX Revo64 controller card and the Netcell bios setup that cones with it. According to the Netcell bios the array is working but booting into 8.1 I cannot find the drive in explorer and device manager shows the Revo64 as "Generic Mass Storage Controller ".
I am very new to Raid this is the first array I have tried to setup. Any help would be greatly appreciated
Why not use the RAID card as more sata ports and then use windows to make your RAID array? I've never used a controller but im sure that it would work for that purpose.
just go on youtube and find a video on how to setup RAID in windows 8. I know its possible for windows 7 to im pretty sure 8.1 will have it
Hi there I ve recently bought a second hand laptop because it was cheap and seemed to only have a minor problem which I hope to be able to fix So far problem TK Easynote boot Bell Packard I ve not been able to so I thought I d ask here for Packard Bell Easynote TK boot problem some help Specs Packard Bell Easynote TK CPU AMD Phenom II X N GHz Videochip AMD Radeon HD M GB VRAM RAM GB DDR orginal OS Windows Home Premium So the problem is that if I try to boot it Packard Bell Easynote TK boot problem about times it starts up I can hear the fan and HDD starting and see the lights turn on Then after a couple of seconds before seeing anything on screen I hear the fan stopping while the lights remain on The times it boots up properly and everything works What I ve Packard Bell Easynote TK boot problem done so far remove battery and power adapter reinstall RAM both at once and one by one hold down power button for a minute and try again with the power adapter connected This doesn t appear to do anything much I haven t removed the CMOS battery yet because it s embedded in a peculiar way and I m not familiar with how to remove it yet Then during one of the few sessions where I was able to boot successfully I installed the newest BIOS-version from the Packard Bell site This also didn t do anything Then since I wanted to do it anyway I started with the installation of Arch Linux where so far I ve only wiped the entire HDD and repartitioned it then I was too busy and couldn t complete it This doesn t matter much as long as I can get into the BIOS properly I ll be fine I m a Linux newbie but have successfully installed Arch Linux on a very old laptop So what I wanted to ask do you know any way to make the startup work everytime Do you have any ideas what it might be My theories so far - It s probably a hardware related problem since it still occurred after BIOS-update and full HDD-wipe without OS - broken powerbutton connection somehow -- gt replace powerbutton - broken fan overheating -- gt shutdown - broken fan cable sometimes does connect correctly I m curious if you have any theories on how to save the laptop Kind regards Ilja nbsp
The laptop may need its thermal pads or paste replaced. The motherboard may be detecting a false over-heating signal...
Hi all. I've got this issue with my graphic card (fresh and crispy by the way - 1 month old). Few days ago I was just browsing web when suddenly blue screen came out of nowhere on my Windows 8.1 desktop PC. Ever since then when computer boots screen is filled mozaic-like with green squares, after few seconds it's changing to vertical lines. Obviously Windows window manager won't open at all, and it greets me with black screen. After I deactivated graphic card, and switched cable to main boards VGA port computer runs ok.
I've seen some similar threads on techspot suggesting that due to escessive dust 'consuption' GPU can overheat and irreverisbly burn therefore. Is it possible that the same thing occured here?
It's what I've seen on the screen when one of my graphics cards has died. As it's almost new changing it shouldn't be a problem. It's more likely to be a faulty graphics card than dust. Double check that it's seating properly in its port and that the video cable is OK.
Hi there! I was wondering if any of you tech heads can help? Been given my nephews laptop which had the vague description of it hasn't turned on in a couple months.
It's a zoostorm loaded with windows 7. I can get into the bios but after that it just sits with a black screen. Any help would be appreciated.
hi guys wish you all a great new year.
im facing a very annoying issue with my laptop, some keys are not working, the left **** and the windows key I just don't know whats happening.
can someone please help mw with that.
thanks in advance.
I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.
Ive got a 2 yr old laptop that my parents bought for me at walmart of all places. I basically just use it for facebook, facebook games, and email. havent had any real issue til now. at first, when it was plugged in it would start up and let me log into windows but would immediately shut down. later it started going through a disk check when I turned it on and would shut off before it was complete. if the power cord was connected it would have a big red x over the power cord logo on the bottom right. I was going to factory reset it but I cannot get that far before it shuts off. bettery is fine and power cord is good. had them both tested. PLEASE HELP!!! IM VERY POOR SND CANNOT TAKE IT TO A REPAIR SHOP!! tyvm
It won't stay on long enough to do anything so this doesn't look promising. Have you tried removing the battery and just using the power brick?
So I ve owned my P HM gaming laptop for around years now and for the most part I haven t had any issues However when I start my laptop it always defaults to booting off of the ethernet card even after switching my SSD to the position in the bios menu Normally this isn t that much of an issue as I can just cycle through the bios boot options using CTRL Laptop Boot issue ALT DEL The main issue that I am having now is that the last time I was using my laptop I used hibernate instead of the normal quot sleep quot or quot standby quot Now whenever I attempt to start my laptop up the message quot Resume from hibernate quot is on my screen which is normal except it tries to resume using the ethernet card If the laptop is in hibernate evidently I am not able to access the BIOS menu or cycle through my boot drives I have read that a way to fix this Laptop Boot issue might just be taking the battery out and letting any residual power that the motherboard might be running off of fade away over time I read that this normally only takes minutes or so I tried waiting minutes and it Laptop Boot issue didn t work so I just tried again but waited a few hours this time before putting the battery back in and attempting to start my laptop up The laptop is still attempting to boot from hibernate Does anyone know of any way to get to the BIOS menu from the hibernate screen Or does anyone know of anyway to fully shut off my laptop Laptop Boot issue to get rid of hibernate and just start up normally Any assistance would be greatly appreciated nbsp
it always defaults to booting off of the ethernet cardClick to expand...
This means that BIOS is not seeing any HD, marked Active and contains a bootable partition
I am trying to set up my Windows Xp computer as a VPN server I have taken the initial steps I get to the Accept Xp setup VPN hanging server Windows incoming connections screen and click okay The computer hangs for about a minute or so and then comes up with the following message Incoming connections depend on Routing and Remote access Windows Xp VPN server setup hanging service which was unable to start For more information check the system event log I presumed I had to go to control panel performance and maintenance Administrative Tools Event viewer I have already made sure that Routing and Remote access are enabled as well as Telephony I could not find Netbios in the services list and don t know where to Windows Xp VPN server setup hanging look for it Also when I try to start Routing and Remote access service manually I get the following message Windows could not start Routing and Remote access on local computer For more information review the System Event Log If this is a non-Microsoft service contact the service vendor and refer to the service specific error code- Can some one give me a step by step walk through of how to resolve this issue so I can connect to that computer from work over the internet nbsphttp://www.techspot.com/community/topics/windows-xp-vpn-server-setup-hanging.207658/
This is my first thread here, and my english is not that good also, so excuse me for any mistakes
I have my Prestigio PC for a 5 years and there were no problems. But today when I started the PC, a error occured.
On starting screen(American Megatrends GUI) there was written: "Primary IDE Slave: Not Detected" and after a few seconds my screen went black and "reboot and select proper Boot device or insert boot media into selected boot device and press a key" message appeared.
So I thought that I will just need to put my Win 7 CD to the CD-ROM, but then I found out I lost it while we were moving.
My BIOS is also saying that Primary IDE Slave is not detected
Is there any way to solve this problem? Is there any way to boot Win from USB?
Thank you for answers
Have a nice day!
Open up the computer, check that the cables are properly 'seated' (pushed in all the way) on the drive and on the motherboard. I know you said it has worked for several years, but for it not to boot with the Primary IDE Slave not connected the only way that makes sense for this to happen is if the optical drive is jumpered to Master and the hard drive itself to Slave. That is a bit unusual. You typically would have your hard drive as Master and the optical as Slave. It doesn't really matter, as evidenced by it working in the past, it just isn't a 'normal' setup.
If the cables are seated properly (power and data), your drive could have failed.. 5 years is a decent lifespan for a hard drive.
You can make a bootable USB for Windows 7, although you can't without a working computer.
Hey guys, I was recently in the malware section, because my laptop had some problems and could not connect to the internet. Broni was very awesome and helped me clear my laptop up, but we still couldn't get it to connect to the internet. He advised me to come here for help.
I will link the previous thread, because there are some log files toward the end I think would be much more helpful than me explaining problems.
Thank you so much for any help.
Can you try to re-install the WiFi driver?
This all started after I reset the router putting in new pass code I m using same name of the old SSID When you click to Windows SSID was to unable connect on the wireless network connection on the name of my SSID on connect it saying Getting information from SSID this sounds like Windows was unable to connect to SSID good thing that windows can see the router and talk to it Type in the network key same thing looks like windows can see the router and talk Windows was unable to connect to SSID to it I type in the network key and OK Than it is saying windows was unable to connect to SSID name I have set up other computers and it can connect but this one computer running windows cannot I have the pass code down on paper and other computers can connect So wrong pass code is not the case The only thing I can think of is is computers using the old profile or my network card may need to be reset When I open networking sharing center and click on manage wireless networks I removed the old profiles in the list But I m not sure if there is still some kind of conflict or the old setting still there some where Well because I m using the same SSID despite the router reset and new pass code I m not sure why I cannot connect unless Windows was unable to connect to SSID the windows thinks I m connecting to the old SSID I tried to restart the computer and no change nbsp
Force the system to forget that SSD and then reboot.
Now look for it again and enter the passphrase.
I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?
NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew
Give this a sec or two.
Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it
If none of the above work go into the device manager. under control panel type: device manager. click on device manager
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)
Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC
Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
Obviously it's worthwhile trying both of them.
Hi I had this problem a DVD-R 7 Won't Windows Vaio read - couple months ago fixed it and am now facing the same problem again I have a Vaio Windows My CD DVD player isn t reading any of my DVD-R cds Whenever I put in a DVD-R cd autoplay comes up and it asks to format the cd I checked these DVDs and they work on other computers They re all burned DVD with files on them Before when this happened I tried many different things I Deleted upper lower filters -- Actually I didn t have upper or lower filters to delete System restored Deleted and updated drivers Finally found a post talking about creating a new key in the regedit NoCDburning After doing this it started working Fast forward three months later my cd dvd player won t read any Vaio Windows 7 - Won't read DVD-R of my DVD-R cds again I did the same things all over again System restored Deleted and updated re-installed drivers Ran Fixit Looked for upper lower filters -- not there Tried looking at the NoCDburning thing again -- deleted and repeated the steps and nothing is happening I don t want to reboot my computer because I already did a month ago and it just takes way too much time for me to reboot everything all over again I cleaned my CD player as well like most of you guys said before I know my drive is still working as it worked before after I fixed it I checked and the last time this happened was in June Since then the only new things I installed updated were CC Cleaner Itunes and some other programs I have Spybot as well Can someone please please please help me I ve been looking for an answer everywhere and I m running into the same answers Thank you nbsp
Have you tried a a system file check to see if Windows can sort this issue out?
sfc /scannow (in admin mode.)
Also if you just explore the DVD do you see the list of files on it? Or is the DVD-R not 'seen' by Windows at all?
Or is the error only with the autoplay part? (Windows trying to help you choose a media player from whatever you have installed?)
Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp
Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.
That'll teach you to mess with Windows when a cd/dvd plays up.
My USB drive is enabled. The USB flash drive or any other storage device is recognized when connected to my laptop. But when I click on the drive in windows explorer, it says access denied. The same works fine in other laptops. I have admistror previlages. There is no local group policy set up on Removable storage access. I have searched multiple forums and tried out various options, but still cant connect to my USB drive. The drivers are successfully installed and are the latest. This happens even when I connect my camera or mobile phone. It shows up as 'Removable Disk' in windows explorer, but cant access it. I have given authorization to the drive as well. Please help.
My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
Hello everyone Been having some crazy stuff going on with this new PC that I just built I cannot get it to startup at first try I just get a black screen and the BIOS welcome try always doesn't first second/third at (but does try) up PC boot at doesn t show up and neither does the windows startup loading of course When I manually restart it Power Button long press it runs just fine I have read that thousands of things could be potentially causing this from Hard Drive to Power Supply to graphics card but my actual bet is on RAM voltages overclock causing it since I recently overclocked it via BIOS setting the default frequency at mhz which is what my RAM offers at maximum and the max that my Motherboard can read The actual voltage is set to auto via BIOS which stays at V so I m not sure if lowering or raising it will solve the problem XMP is disabled not sure if that s relevant My BIOS is up to date My graphics card is old I m planning to change it soon but I didn t have any problem in the past with it Hard drive is also old but runs just fine I m open for any suggestions Specs - Tacens Mars Gaming W power supply - AMD FX- Eight-Core - PC doesn't boot up at first try (but always does at second/third try) MSI Gaming Motherboard http thepcenthusiast com msi- PC doesn't boot up at first try (but always does at second/third try) -gaming-am -motherboa - XFX ATI Radeon HD GB DDR - G Skill Ripjaws X DDR PC - GB CL x modules of GB Dual channel in slots amp - Hard Drive SATA II WD EADS- M B TB - Win - bit Some screenshots CPU-Z confirms I m running at mhz MSI Command Center does not get accurate frequency readings Thanks in advance for all the help If I forgot to mention something please tell me nbsp
Check and make sure the wire cables are connected properly and not loose. Also, can replace CMOS battery and see you may able to access your computer.
P.S. Also check that the hard drive connection is set to UEFI under BIOS connection settings. Windows 8/8.1 supports only secure booting.
Good luck though!!
Hello...I will start from the begining .
I bought the Acer V5 and tried booting it up...it came with boot-up Linux which means nothing to me so I made a Windows 8 bootable USB and the problems started. First I could'n find the USB and after enabling the Legacy mode it finally found it and booted from it. Turned out the partitions are GPT and as I made the USB MBR it couldn't install so I canceled which I guess was my mistake but there was no other option. After that I created the bootable USB with GPT partition scheme and tried again. Unfortunately this time I got something called GNU GRUB....wth? I googled around and found the commands required for booting - root (hd1,0), then chainloader +1 and finally boot. Then I get the famous The Boot Configuration Data for your PC is missing or contains errors with Status: 0xc000000e. Of course tried that couple of more times but still to no avail. I cannot recover or repair as Windows was never really installed, so I don't know what to do....Hopefully someone here would be able to help. Thanks in advance guys.
I an trying ti install a video graphics card, when I plug in to my pci ex slot and plug in the leads the screen does not work, but the computer does, now I see that I have a pnp monitor but the card and a vga adapter on it, I have tried everything possible but cant get to work, anyone any ideas?????????
Recently I noticed that my laptop speakers aren't working consistently at all. Sometimes I watch youtube, listen to pandora, and everything will work fine. Other times it won't work at all. I've been getting by like this for a week, but now it seems like now the only audio my speakers will play is a notification sound. I still have the computer under warranty, and I can take it into the store and get the speakers fixed. However, I was wondering if there was a way I could skip all the trouble/paperwork of taking it back in? maybe I just clicked something I shouldn't have?
Any tips are hugely appreciated!
I'm wondering whether I can overclock my ASUS R500VD notebook it has an INTEL sandy bridge core I5 3210M 2.50 GHz processor 4GB (max 8) of ram running puppy linux and windows xp home edition SP2 32 bit I have benchmarked it and ill email the results to anyone who replys and gives me their email and if you're wondering why I'm running windows xp read my article in the Alternative OS section of the forums called "If all else is too hard try puppy linux" bye
Nope sorry, the I5 3210M isn't OC enabled.
I have a Windows 8.1 Laptop and yesterday it said I had no connections.
My computer is wireless but then it went to Ethernet it didn't let me connect to anything either.
I tried looking things up to see how to fix it but it just kept talking about buying cables.
Anyone know whats wrong?
You may try to disable your Ethernet adapter (wired connection) while you're connected via a wireless connection through your wireless adapter.
Hi, not great with computers and had a look around at various forums and can't find a solution to my problem.
Essentially, whilst I can view the wireless network connections available, I cannot connect to the wireless connection I want to although all other computers at home can connect.
I think the issue is that I have no IP address on this computer (using Windows XP that has just been reinstalled). The result of ipconfig/release is:
No operation can be performed on Wireless Network Connection 2 while it has its media disconnected.
Sorry if further information is required, will provide whatever is needed. Thanks for any help!
First disconnect any wired connection and THEN attempt the wifi.
Something called DHCP is responsible to give the PC an IP address and also the DNS addresses (regardless of wired or wireless).
when i start my computer, it goes to the gateway start page, and after a while (it's quite slow) it goes to the black page, and this is what it says:
Intel Boot Agent FE v4.1.10
Copyright (C) 1997-2003 Intel Corporation
Intel Boot AGent PXE Base Code (BA 1210BC-GW1)
Copyright (C) 1997-2003 Intel Corporation
PXE-E61 media test failure check cable
PXE-M0F exiting Intel Boot Agent
Reboot and select proper boot device or insert boot media
in selected boot device.
it just stays on that screen until i do a CTRL ALT DEL, then it goes back to the Gareway screen and after about 30 seconds finally boots up and i get the Windows XP start up page, and it opens up my desktop and i can continue .
Can anyone tell me why this started happening and how to correct it?
How old is the computer, or the hard drive. It appears you have a failed or failing hard drive.
I have got a new desktop PC, which works fine with Ethernet but I am not able to connect through wireless.When I tried to connect to the broadband, it says error connecting to the Broadband connection
Error 651: The modem (or other connecting device) has reported error. However, same comnnection works very well with my vista home premium Dell Laptop.
Thanks in advance
How to reset TCP/IP by using the NetShell utility
need to know if I can upgrade my graphics card for upgrade to windows 7.
current graphic card:ati radeon 9200 se 128mb ddr tvo
computer :fujitsu siemens scaleo 600
motherboard :microstar ms-6585 2.oa
power supply:dc output 250w
thanks so much.
I don't know if you CAN upgrade your graphics card, but:
You most likely don't NEED to.
It's not really a good idea to upgrade at all. Those parts are old as dirt and you won't find anything cheap that'll fit.
I have an Acer E1-571 suddenly I have an X on my audio controller icon on home page and no audio devices in control panel. I have tried installing sound video and gaming controllers and then tried to install update but it says best already installed and still no Audio.
Any and all help greafully appreciated and many thanks in advance
Look for audio drivers on the motherboard CD delivered to when after purchasing your system. If you can't find it or don't have mobo CD around, navigate to manufacturer website and download driver for audio device from there.
I've recently bought a HP Pavilion 15-n252sq laptop, with Free Dos - unfortunately I can't install Windows 7 over it, due to the following error I keep receiveing in the Installation screen:
"Select the driver to be installed" - and regardless of the paths I have and the available folders, I can not seem to proceed wtih the W7 installation.
Please notice that, I've tried to use both a W7 DVD and also a bootable USB drive (and yes, connected in the USB 2.0 port and not USB 3.0 ) - but I always get to the same point where I have to select drivers.
Please also notice that the BIOS doesn't allow me to make any modifications except for some minor ones (like select boot priority, or enable USB 3.0), as the rest of the MAIN features are greyed out .
Can anyone please help me with this issue?
You may have to use a program Like KillDisk to reformat the drive. Then try installing your Win 7 DVD.
I am writing because from few weeks I can not solve this problem of connection:
if the computer is in safe mode there aren't problems, while in normal mode, the following programs don't connect / update:
Internet Explorer 11, Dropbox, Malwarebytes, Mozilla Thunderbird, Flash player update, Java update, StartUp Delayer.
While Firefox, Chrome, Emsisoft Anti-Malware (Antivirus), Online Armor (firewall), and other programs work and update normally.
I've tried and tried various "solutions" found in the Web and in the Forums, but without any result.
I noticed that Dropbox and StartUp Delayer "tell" me that's is probably a Proxy problem.
I honestly have never used a proxy, and tried in every way possible to disable any proxy, but nothing changed, same issue.
I tried uninstalling antivirus and firewall, but the issue still remain, the same as resetting the connection settings and even Windows Firewall (which is usually disabled).
This problem is present both with ethernet connection and wireless.
I use a HP dv6000 notebook with Windows Professional 64bit.
I thank you if you can help me, because I really don't know how to fix this problem =/
I MIRACULOUSLY solved this situation!
Among the many details I forgot to say that for the connection I use a router, and after several attempts to copy the settings from a computer connected to the same network, I tried to enter the DNS entry of the parameter TCP/IPv4 (in connection properties) 192.168.1.1 and 192.168.1.7 ..and all began to work perfectly.
I can not explain, howeve, why the other computer works even without these two values.
But I'm happy that this (strange) situation is solved, and hope this can help someone else
Have a nice day,
Guys I am looking for a new notebook, and I have general idea of what I want, but I am unable to find anything comparable so far (in reasonable price range, I.e. about 1,500$). Here are the specs which I've in mind:
i7 47xx Processor
8GB RAM (or higher)
GT760M (or similar range GPU)
SSD Boot drive + 1 TB HDD
15.x 1080p display
I have no preference for any brand, although, in last few years I've bought HP notebooks, generally because I have good connections there in case there is some issues
Specify dual or quad core CPU.
Hi everyone, I have a problem.
I pinmodded an LGA771 Xeon to work with my LGA775 motherboard. I decided to do it the hard way and use aluminum foil and tape to pin mod it. I think it worked out fine but anyway, on to the problem.
When I cut off the LGA775 alignment pieces, I accidentally bent 2 pins out of shape a little. Initially, I didn't notice, so I put in the Xeon to try it out, didn't work.
Then I tried my old processor, also didn't work (worked fine previously).
So then I noticed the pins and bent them back into shape, AFAIK it is perfect and you can't even tell that anything happened.
Tried both CPUs, nothing, no beeps, no signal to the monitor.
Is it possible to damage my motherboard if I didn't do the pinmod correctly?
Is it possible that I damaged my processor or motherboard by trying to run it with those 2 pins out of place?
I am not really sure, but my guess is you did not do the pinmod correctly since both CPUs do not work. I hope someone else can provide some insight on this issue. Good luck!
I m officially out of ideas and I m hoping you kind way of operating notebook system No on installing folk here could help me out I have a Hp notebook whose hard disc I formatted while transfering data from it to my computer so I could do a fresh OS When I returned the hard disc into the notebook I found No way of installing operating system on notebook that I could not install Windows by any medium I tried plugging in an external DVD reader and installing windows like I did the first time on this notebook but No way of installing operating system on notebook it would not read from the device BIOS recognises it only as USB LEGACY SUPPORT When I tried installing windows from an USB like I did many times on my computer the screen would freeze when I pressed any key to No way of installing operating system on notebook boot from USB I tried changing USB ports for the devices I used it did not help and I tried changing USB memory sticks from which I booted but alas no success I don t know if there is a way of transfering the files from the dvd onto the hard disc make it bootable somehow and then install the OS on the hard drive the same one I also tried installing other OS using the same methods Windows and XP but have had the same problems P S I haven t tried preinstalling a system on the hard drive on another computer and then inserting the HD into the notebook hoping it would boot I tried that once on a comuter and have had no success Please do help cheers nbsp
Does this help ?
or this ?
My partner's laptop HP 0700 Notebook will not boot up and just comes up with the above message. We found an HP troubleshooting site which said to reset the BIOS default settings by pressing the Escp key, F10 followed by F9 to reset. Then it said to press the F2 System Diagnostics keys which tested the hard disk and all the tests came out OK. When we tried to restart it, it came up with the same message and we have noticed that before it comes up with this message it says in the bottom left-hand corner "Prepare boot to OS" and then comes up with the message in the heading. We have not bootable disk as the laptop already had everything installed.
Coupled with this my partner's virus protection is coming up with "Threat detected" every minute on practically every site my partner visits on the Internet. You will appreciate that we cannot run any virus checks as we cannot get into the computer.
Any suggestions would be very much appreciated.
Any luck with this?
I recently built this computer see other a thread on building a PC using Windows on a ssd drive and I used my sata drives for storage audio video The other drives folders using Can't 7 storage create Windows on drives are from my old system and they were set up for RAID I re-formatted the drives but now they automatically create a system info folder and a recycle bin folder I don t know why but Can't create folders on storage drives using Windows 7 I can t create a folder on these drives They are patitioned NTFS Does this have something to do with the RAID configuration from my old system I need to create folders to manage my projects but it will not allow it Also I installed Norton on the system I am using the internet for downloading programs I need once everything is going smooth I will no longer access the web with this PC The Norton has an error on it and when I try to fix it it gets stuck on trying to optimize the storage disk E My SSD is drive C with a partition D for B U the next drive is E Does anyone know what I am doing wrong Thanks to anyone who can speak to this problem nbsp
Which RAID Configuration are you in? I think you may have have it set up incorrectly. Depending on what RAID you are using will depend on how your drives can be used. Let us know what RAID you are running which you should be able to find this in your RAID control panel when you boot into it. Thanks.
We need to restrict several Windows 7 (32) desktops with staff, Server 2003 really does not have anything, same as Win7 GPEDIT, seems to be all or nothing, however,
From the Windows 7 desktop:
- Windows 7 Explorer
- Go to the DVD\CD
- Right-Click Properties
- Advanced Sharing
- ?Share this?
- Add Domain (User1, User2, Etc) or create a Domain group ?AllowWin7CD? and add user to this,
- Remove default ?Everyone?
Anyone see a security or problem with this? Simply sharing as a network resource and assigning domain rights.
Just bought thermal take challenger ultimate keyboard and having a problem when when I plugin the keyboard it override the windows sound and goes off, tried with 2 pcs win 7 and win 8 same thing no sound
want a solution
Got the same problem..
Model dx -ub gtx ti evga win Today my brother was granted a hand-me-down gpu from a good friend of mine and after attempting everything I know installing the card computer visuals boot on No nothing seems to work I get no visuals boot The card seems to power up the heatsink at least but the card still gives no visuals Installing the card was goofy as all hell For some reason when apparently fully seated the end of the card where the ports are refuse to line up properly There is about maybe a quarter of a No visuals on computer boot inch gap Seeing this makes me assume it is definitely not No visuals on computer boot seated correctly I re-seated about plus times it does not want to go in correctly or so it seems I am starting to think the gpu is far to big for this moba or the case is just poorly made On top of everything the computer does not detect the gpu in any form on device manager or any other program Installing the drivers won t work because it doesn t detect the gpu as well Could it be a faulty psu - idk Maybe the gpu just went because it was nold - idk All I know is this is a friggin pain maybe someone could help me out The gtx ti was working on the current day when it was in my friends computer And yes I have plenty of power wats it was the same power supply from said friend s computer nbsphttp://www.techspot.com/community/topics/no-visuals-on-computer-boot.200851/
Hello I got a weird one for you guys and I literally have tried everything can think of so I am hoping someone has some new fresh ideas I have a Dell Latitude E that can no longer connect via wired or wireless connections Both adapters display yellow exclamation marks next to them and in the properties of both adapters says Windows cannot install because the drivers are not recognized Error Both adapters are also missing from the adapter page in network settings I have download the most recent versions of the driver and installed no luck I have downloaded previous version of the driver from dell and installed no luck I download the driver directly from Intel and installed no luck Tried a BIOS update nothing Tried to reset to defaults nothing So I decided I would rebuild the is one Windows 31, not NICs weird Error this working 7 machine and SURPRISE that worked for a week and then the problem started again So my first thought is well maybe its a bad motherboard so I swapped the HDD with another Dell E boot it up and NICs not working Windows 7 Error 31, this one is weird both connections are working In the laptop with the drive from the bad laptop it can no longer connect now so the problem is related to windows and follows the drive Does anybody have any idea whats happening hear I am all tapped out of ideas Thanks let me know if you need any additional info Dell E Windows Enterprise auretsky vailresorts com nbsp
"so the problem is related to windows and follows the drive"... Re-install Windows on this drive. Error 31 relates to a bad driver that may be reflected in the device manager
MY WD 500GB USB HD just yesterday stopped working normally, it was working fine two days ago. When I connect the drive via USB it appears as a different drive letter for some reason Local Disk : I then disappears. My laptop makes two noises one that I've connected a device to the laptop then another noise which is when I disconnect a device. It makes this connection/disconnection noise when the HD is plugged in numerous times every minute or so.
The HD doesn't appear in windows explorer but appears in devices.
Very strange and unusual any ideas?
Can anyone assist??
I just got new SSD - Transcend 128GB. Installed Windows. When I cold boot my PC -- from a shut off state -- I get this message before Windows loads: "Reboot and select proper boot device or insert boot media in selected boot device and press a key."
However, if I press Ctrl+Alt+Delete and reboot I come into Windows.
If I enter BIOS from cold boot, it does not detect my SSD. After rebooting it detects my SSD. Seems like the SSD is slow at firing up?
I have run chkdsk and memory test without any errors.
My motherboard is the MSI Z87-G55.
Just installed newest BIOS, it didn't help.
When I go into Board Explorer in BIOS it says SATA port 1 is empty. After reboot it says the same port is occupied by my SSD.
Update: Plugged in another hard drive (non-SSD). Same rules apply to it. On cold boot, none of the drives are detected. After reboot, both drives are detected. I used a non-SSD as system drive before this, worked perfectly.
Sorry if it s the wrong section Hi guys I have a problem with my new keyboard I am running Windows and I ve tried on other computer on windows The quot Fn quot key doesn t work On the box it s says the keyboard comes with shorcuts like Fn F Computer If I try a quot test key program quot it doesn t seem to recognize it Please tell me what to do My keyboard I think it s a no-name keybaord quot digittex quot I could not find any drivers for it Please help Take a look at this pic http gyazo com b c a bb ec bcc ee on FN problem Windows 8.1 key d e png That is my keyboard - gt Shows that I have a quot Media quot button I also have play pause volume down and volume up All that are working - gt You can see the images of quot Internet Explorer Favorite Search - gt The windows doesn t recongnize the quot Fn quot key so I cannot acces the keyboard quot shorcuts quot Take a look at this FN key problem on Windows 8.1 pic too http gyazo com eae a f d fbf fb e png That s what it says on the box - gt You can see quot FN quot amp - gt You can see what it supposed to do Ex FN F My Computer Help me please nbsp
So I installed a second Hard drive this weekend. And I want to create a new partition on the new hard drive, which will hold my boot files. So I want a partition of my second hard drive to be my main boot device. (Like 20gb)
Then I?m going to combine my first hard drive, and the remaining space left into 1 partition.
My Local disk has my Boot, Page file, and Crash dump. I want to move this to my new partition. (Second HD)
I tried moving the entire windows file in my local disk to the second hard drive, half way through it wouldn?t allow me to move all of the files.
How do I do this without re-installing windows?
I have a 128gb samsung SSD. I was wondering what updates I can remove to get more space on the SSD because windows7+all updates are currently using half of the SSD space and somehow only 119gb of the SSD space is displayed so I'm guessing that 8gb is reserved or something.
I'm currently removing the extra languages and those are giving me and extra 5,5gb space
Somehow I think you have more installed than Windows and updates. Internet Explorer, Bing Bar, and Bing Desktop are the only updates I have hidden. All other Windows Updates have been installed. I wouldn't put all the blame on WIndows, if you have an install using 60GB.
Anyone with more than 8GB memory and still has Pagefile and Hibernation, by default has more than 16GB used by these two files alone. I recommend using them only if needed. I personally don't need them and have removed them both.
Check and see if you have a Hibernation file. If you don't use hibernation features, the file can be removed.
Windows 7 ? Delete Hibernation File (hiberfil.sys)
To turn off or disable hibernation, type the following command at the prompt:
powercfg ?h off
This will disable hibernation and will remove the hiberfil.sys file from your system.Click to expand...
Monitor your memory usage and if you have more memory than you ever use. The Pagefile can be minimized. I currently have mine turned off, with 8GB installed. But caution though if you turn the Pagefile off, Windows will not be able to compensate for a shortage of memory and the Windows session will crash. While I am comfortable not using a Pagefile, I do not recommend others do the same until they are comfortable doing so. I recommend lowering the Pagefile size to 1GB, and if Windows needs more, the size will be automatically adjusted.
I'm using windows 7 on my pc and try to connect to my home wireless connection .
every time I try to connect and enter the password, it won't be connected.
However, I'm using my laptop and phone to connect and it worked properly.
Please help my problem
Thanks in advance
How is your wireless Configured. I have seen many issues when using mixed mode in certain Linksys or Cisco Products. What kind of adapter are you using on y our PC for wireless Connection? Has it ever worked?
I recently changed my motherborad , and I have a new Graphics card and new processeur ,
Graphics Card :
-AMD M880G with ATI Mobility Radeon HD 4250
-AMD Radeon HD 6470M
I used every way to update the graphics card , sometimes it appears the blue screen , and then the drivers never up to date , help me as soon please
Computer : HP pavilion g6 Notebook PC
System : Windows 7 64 bits
this is an image from my computer
Have you worked on or repaired many laptops? English is not your first language?
Acer travelmate Model BY Operating system Windows XP wth servicepack Hi After being reinstalled windows xp the sound of my laptop has been disabled The icon of sound in the right bottom of the screen has been gone And now disabled of being my windows is Laptop after Sound xp reinstalling I got different sound errors sometimes when I go to - start all programs accessries entertainment volume control and then click I got the error that quot there is no active mixer device avaiable On control panel when I click on Sound is being disabled after reinstalling windows xp of my Laptop sound and audio devices I found all the options related to sound are being disabled I also checked out the harware section on MY Comuter the sounds drivers are there but something goes wrong with respect to that I have already downloaded audio vga and someother drivers from us acer com ac en us content drivers and installed them but the problem is still there that is the sound is disabled I would really appreciate on this forum if I can get the solution from someone with respect to that sound problem I am facing I can t want to open my laptop s harware because I cant do that BinNyen nbsp
Do you see any yellow (!) in the device manager?
I am finding this problem to be a bit of a puzzler I have pc s networked together and connected to the internet through a switch and Unable the browse internet 7 to Windows then to a BTrouter all connected via Ethernet cabling None will connect to any page using IE one Unable to browse the internet Windows 7 has google chrome that will open google do a search if Unable to browse the internet Windows 7 I type in a subject but if I try to open one of the found pages it won t open them if I type in a website address same problem If I go into windows Live mail it will send and receive mails suggesting to me that internet is connected I have ran scans with Combofix and Malwarebytes which found next to nothing and booted into safe mode but still no success I can access the software on the routers so that connection is fine Have rebooted router and also changed the router for a different make and still no success both routers seem to tell me that broadband is connected This was all working OK some days ago and then all stopped working Any suggestions would be gratefully received nbsp
Let's try this; using an Admin user login, get the command prompt and then enter:
net stop "dns client"
Quit any existing browser, restart a browser and try Google again.
If you can run like this (btw: it will be slower to resolve the url), then we need to investigate youretc\hosts file. If you still can't surf the net correctly, we need to dig deeper.
Hey guys I ve just picked up a new Lenovo Ideapad y p which has been great thus far A major problem I ve been experiencing though is with the wireless connectivity I ve had minor Wireless Unstable Connectivity with Windows 8 problems like this in the past but only on windows machines and only in this house every mac amp gaming console in the house can use the internet flawlessly and I ve had no problems with connection to networks other than my own on this particular laptop The problem I ll be using the internet normally and all of a sudden I will lose internet access Sometimes the icon remains like this with no connection sometimes it tells me I have limited connection and changes Unstable Wireless Connectivity with Windows 8 to this still no connection and sometimes it disconnects completely this The strange thing about this issue is that disconnecting Unstable Wireless Connectivity with Windows 8 and reconnecting to my network or just reconnecting almost always solves the issue temporarily of course A little background I live in a large house so our wifi is set up pretty weird The main connection comes from a cisco wireless router in the basement that we are using as a wired router directly hooked to the modem Directly connected to the cisco is an apple airport extreme that provides the house with wireless Since the signal doesn t cover the whole house there is also an airport express directly connected to the modem This express sits on the other side of the house and is the closest access point to my computer I have tried changing wireless channels to solve this issue no luck Now I could keep using my internet like this having to disconnect and reconnect every minutes but it gets very frustrating especially when streaming or gaming Any ideas or input would be greatly appreciated thanks nbsp
First I would suggest that you set the MTU to 1492 in the Cisco and all all Airport devices. This will stop what is known as packet fragmentation and reassembly which frequently causes problems.
Secondly, be sure ALL such devices have the latest firmware.
If your ISP connection is using ADSL, ensure all devices plugged into the phone line anywhere in the house have the dsl line filter.
The "limited connection" issue is always a failure to get a response to the DHCP request.
(every mac & gaming console in the house can use the internet flawlessly, and I've had no problems with connection to networks other than my own on this particular laptop).Click to expand...
And this points the finger at the Windows Device Driver - - so look for an updated version for your machine.
I bought an Asus H87M-E. I can't install 3 X 3TB hard drive Raid 5 on this board. It is a new board, I can't find Bois update. I created the Raid5. the O/S displays the drives with different sizes 2048, 745, 1875GB. I have no idea what is happening! Tech support said it is windows problem, But I don't buy that. I broke the raid and try to install the O/S on a single drives, but the O/S recognize it as 745GB.
Windows normally accept only 2 terabyte in re installing the windows you should make a partition for your new 3TB hdd.
Im using a verizon wirleess USB modem (verizon wireless usb551l). It has been working fine for the last month, all of a sudden i start getting this
"windows has detected an ip address conflict"
Ive spoken to verizon, we were nice enough to allow me to get a new device after we spent an hour troubleshooting and still the same problem. Im connected for about 8 minutes then i disconnect and get the pop up with the error. I have been told that i have a windows 7 issue. Im not sure where to look or what do to? any help would be great, thanks in advance
ive tried resetting the IP address, reinstalled software. idk what else to do!
Where did you reset the IP address? I mean in which device did you reset the IP address?
Hey, I recently upgraded my computer to windows 8.1 and I'm having issues recently with fuzzy stuff in my screen.
sometimes this would happen when im browsing a forum..
It's not only this forum its every site with colors and this is an image of the place
after I scroll up.
My system properties..
Hey guys I ve recently installed a new hard drive on my desktop PC It s a GB quot drive that I removed off of a new laptop I got The drive works great BUT ever since I installed it I get a really annoying drive, hard boot new get message Installed on message every time I boot my machine It s some sort of copyright disclaimer It says the brand of the HDD Hitachi and lists the copyright of the disk management system or something like that It says copyright jmicron com and then quot Hit enter to continue quot The message is displayed maybe for seconds and it disappears on its own so no need to press enter Pressing enter will get rid of it faster So yes Installed new hard drive, get message on boot it s not an error but it s annoying and it adds to Installed new hard drive, get message on boot my boot time I m assuming the exact brand and model of the HDD isn t relevant nor is it the message but if it is let me know and I ll post that information I m not near my PC at the moment Is there an option in the BIOS or msconfig I Installed new hard drive, get message on boot could change to get rid of this Intel Core i GHz GB DDR RAM Mhz GB Samsung SSD Main drive additional HDDs GB GB and GB ATI Radeon HD GB W Power Supply W nbsp
A little help with this, please? I'm baffled, I'm no computer newbie and I've installed many-a hard drives before, but I had never gotten this message after installation. The exact model of the hard drive is:
This is a picture of the message:
Laptop, Tosh R945,Win 7 Home Premium
The computer changes the "on battery" brightness to full periodically. I cannot figure out the common theme to this....
I set it to 70% to save battery
sometime later it is 100% again
nobody uses the computer except me
I am not changing it
I have been having an issue for about a week now with my internet 7 Windows connectivity with Issues internet on connection on my PC I could surf the net for hours or Issues with internet connectivity on Windows 7 post in forums for an unlimited amount of time with no connection issues But as soon as I try to play an online game or stream a video song or even download something I seem to get frequent disconnects It s only temporary for example I could log into WoW and for about - seconds everything is fine Then I see a bit of lag and I get disconnected but I can log back in immediately My disconnect doesn t seem to last longer than second If I am buffering a video on YouTube it sometimes stops halfway through and I need to reload the page to get it to start buffering again I did a full clean on my PC with some help from others on this website and after running some programs Broni mentioned that he doesn t see anything malicious on my computer What else could be causing Issues with internet connectivity on Windows 7 these issues Please help nbsp
Specs on the PC?
What OS is in there?
How much RAM?
How fast is the CPU?
Size of HDD?
Network Rated Speed on there?
Desktop or Laptop?
How old is the PC?
Your Internet Service Speed for download and upload?
What do you have? Cable or DSL?
What has changed prior to this issue?
Also see below:
When last did you check the system out for issues?
Clear the Cache/History for the Brower
Scan for pest (Malware) on the HD?
How you ever clean out this box?
Check the vents make sure there are no dust or anything blocking the vents / fans?
Router. When was the last time you did a power cycle, means you turn it on and off.
Modem the same as above.
If on Windows PC if you can get to the Dos Prompt right click on that icon then select Run as Admin.
netsh int reset all
netsh int ip reset
netsh winsock reset
reboot your PC
I m running main HDD in RAID and all is ok there I check in BIOS the SSD is recognised - using the Control I command I can see the SSD is available and status is normal I boot to Windows and it disappears I m running a w PSU and wondering if it s a power issue but why is it not a power issue in DOS It s puzzling as I previously had it working before until I recently reinstalled Windows BTW I did edit my Regedit before this so I could change from IDE to RAID on my main HDD I changed iastorV Start THIS IS WINDOWS RAID HAVE IT ON SINCE MEANS ON pciide to SSD 7 dissappears Windows I when drive boot up THIS IS IDE HAVE IT ON SINCE MEANS OFF Before I did this it would get BSOD when starting Windows having only the BIOS changed to RAID on main HDD Should I have changed the pcide to and instead SSD drive dissappears when I boot up to Windows 7 left it at Anyone have any ideas nbsp
This has been sorted - I removed the Kingston SSD and used an OCZ Agility 3 SSD which was instantly recognized. Apparently Sandforce, the controller the Kingston uses has a problem so that's what it was.
This topic can be closed.
Hello, I have nvida 8500 gt and the problem is that my screen goes white after using it for sometime, when I remove the card, it works fine.. I have the latest drivers installed but that doeesn't fix this problem... I have a dual core 2 gb ram, intel...please help!
I would gather Nivida 8500gt. I s going bad. It might be time for a replacement.
Recently I was doing a research about a memory update for my G - LA Notebook and in many websites including the Netbook User s Manual I found that this Notebook could be upgraded up to Gb of memory So Upgrading Notebook Failure G42-365LA HP Memory I bought two RAM memories of Gb each one SoDIMM DDR PC - MHz according to researched specifications But the thing is that when I installed them I couldn t enter into the OS it sent me to the Windows Error Recovery window directly and whichever option I choose it reboots and it keeps doing that Well I tried installing just one memory alone and the result is different it came up with the BSOD giving me different errors each time I reboot the Netbook These errors are BAD POOL HEADER PFN LIST CORRUPT IRQL NOT LESS OR EQUAL I ve tried to reinstall the OS with memories installed but the result is the same My Notebook is a HP G - LA Windows Home Premium x Service Pack Intel Core i CPU M GHz I don t know if I was cheated by the manufacturer website and or the others websites that s why I need your help P S When I installed just one memory module I can see The Windows intro logo but just for two seconds or so And I tried to install quot Ubuntu desktop amd x quot with just one Gb memory module inserted and everything was good but it wasn t with the two cards installed nbsp
One of the stick of ram maybe bad. Try them each one at a time.
I have a western digital 1 tb hard disk. which was working fine few hours ago.
but now when I am connecting it it is not showing in my computer.
I am using a windows 7 X64 machine.
I have tried every thing.
when I uninstall the driver from device manager and connect it again, windows tries to
install the driver but fails every time.
I have lot of important data on the drive
I'm not sure whether this is the correct place to post this (I'm new here). Sorry if it's the wrong place!
So my problem is I am running a laptop on windows XP. Every time I start up the computer, it prompts me to install device drivers (HID-compliant devices and stuff). The weird part is, I've already installed those drivers when I first got the computer. I've learned to just press cancel every time those prompts pop up, but I'm wondering if I'm able to stop them from popping up every single time I start the computer. I'm also curious as to why it's doing this. Any help would be greatly appreciated!
Operating System: Windows XP Service Pack 3
Processor: Intel core 2 duo
RAM: 2GB DDR3 RAM
Brand: Lenovo R500
Graphics: Intel R 4 series express chipset family (on-board)
I'm far from an expert, but why not let them install to see if it quits prompting you? If all else fails, you can roll them back. After all, they could be "updated drivers". Just my thoughts.