Windows Support Forum

Phoenix Envy 860-039nb fan runs at max speed (fan #6)

Q: Phoenix Envy 860-039nb fan runs at max speed (fan #6)

Hi nbsp I have a - nb tower nbsp When the PC is off and I turn it on fan case fan see step here http support hp com us-en document c directly starts blowing at maximum speed and never stops nbsp This is nbsp the out of the box behaviour the PC is new nbsp I have searched HP site and found that a bios update could fix this nbsp I tried to install the bios update from the drivers and updates pages of the - nb but to no effect since that bios update is for a different family See nbsp http support hp com us-en drivers selfservice hp-envy-phoenix- - -desktop-pc-series mo gt bios nbsp Now the funny part and 'solution' nbsp When at boot I open the HP diagnostic tool with F and after it exit nothing is done changed just F and exit the fan directly operates normal nbsp Right now it means I have to do the F action on each booth which is a solution But I prefer to have the above behaviour Phoenix Envy fan (fan 860-039nb runs max #6) speed at fixed in a better way

http://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Phoenix-Envy-860-039nb-fan-runs-at-max-speed-fan-6/td-p/5730509
Relevancy 100%
Preferred Solution: Phoenix Envy 860-039nb fan runs at max speed (fan #6)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 23.22%

So basically how the title is.

My internet would drop out/freeze. Router doesn't indicate any change in service. I plug my laptop into the modem, and have prime speeds.

Restart the router. Works for awhile.
Reinstalled the firmware manually on the router.
Set the Channel off of "Auto" and put on various options of 9, 10, 11 to avoid clashes with other networks.

Freezes. Now the router indicates there's no connection. Drag the cord out of modem and test. Prime speeds.

Okay, screw this - I went and bought a new router yesterday because, sure, that Belkin one was 2-3 years old. Set it up with same channel settings, etc.
Same.
Freaking.
Thing.

I have a laptop that runs a VPN (for work) that uses it, plus multiple iphones (3) and ipads (2) an AppleTV and a Samsung smart TV.

Like, help me please here.
 

A:Internet Drops Out, Consistent Speed with Modem, New Router - no solution

OK, but lets solve on thing at a time 1) ignore the VPN at work and let's get the home router stabilized.
The mobile devices are difficult to diagnose, so 2) stick with the PC for now.

Standard questions:

did you update the ethernet & wifi drivers on the PC?
have you looked to ensure your new router has the latest firmware?
*if* you have a DSL connection to the ISP, do you have the line filters on EVERY device connected to the phone line EXCEPT the line to the modem? *MUST HAVE*
Got to get these right first.

THEN, find the MTU that's right for you AT HOME and set that into the new router:

get a command prompt
ping -l 1500 -f 8.8.8.8
as long as you see Packet needs to be fragmented but DF set., reduce the 1500 by 8 and iterate with the new number
:: record the MTU that works for your ISP at home
The router conf page is accessible using your browser and HTTP://your_router_address/
You need the router password
set the new MTU. Also set a new router password and save the settngs.

The wired connection should be solid at this point.

The wifi should also be better, as long as you avoid other stations with the same channel.
I assume you've see the post re inSSIDER for wifi setup.
 

http://www.techspot.com/community/topics/internet-drops-out-consistent-speed-with-modem-new-router-no-solution.212305/
Relevancy 23.65%

If I currently get an average of 20mbps using a linksys n router with comcast as my ISP. If I upgrade to an ac router, and assuming I have ac compatible devices, will I get any significant increase in wifi speed? I wasn't sure if I need to get a faster internet tier from Comcast or not. AC routers promise much faster speeds (400mbps) but comcast says they provide me with 25 tops. Can I just upgrade my router or do I have to pay more to comcast?
 

A:Will 802.11ac router increase download speed?

If 25mbps is all that comcast is providing, u are doing all u can expect if u are receiving 20 u are doing all u can expect with that plan. changing u'r router is not going to help in the least.
 

http://www.techspot.com/community/topics/will-802-11ac-router-increase-download-speed.209175/
Relevancy 24.08%

Hello I have an old HP Pavilion n that has - GB DDR PC ram modules but they are being reported in BIOS as only being at PC and I am just wondering if this is the best that this system can do with this speed of ram or is there anything that I can do to get it to run at PC Here are the specs from CPU-Z Mainboard Model - ASUS P B -LA rev Chipset - Intel i D rev Southbridge - Intel BA ICH rev Processor Intel Pentium - GHz - Northwood Clocks Core Core Speed - MHz Multiplier - x Bus Speed - MHz Rated FSB - MHz CPU-Z is reporting that both modules are PC DDR but the BIOS is indicating PC The BIOS does not have the ability to change anything regarding clock settings and the board itself has no jumpers to change so any input would be welcome regarding any suggestions if this system can actually get full usage of the PC DDR GB modules or if it can only run at PC because of the Bus Speed I thought that if Speed Ram reporting BIOS not correct in the board had a MHz FSB it would run DDR PC ram Any advice would be appreciated Thanks Brian nbsp

http://www.techspot.com/community/topics/ram-not-reporting-correct-speed-in-bios.207737/
Relevancy 29.24%

Randomly, about 2-3 weeks ago my computer began to run slowly. If I'm just browsing the internet or using word documents and things like that it is fine and I cannot tell. The problem lies in things like playing games or running programs like itunes. I checked for all virus/malware, and there was nothing that I could see. I did a defrag and cleaned/cleared the registry and temp folder. Does this sound like it could be a hardware or driver problem? If its not a virus, could you give me a few other reason a computer would start doing this randomly.
 

A:Computer runs slow

Overheating? What are the computers specs?
 

http://www.techspot.com/community/topics/computer-runs-slow.179236/
Relevancy 24.51%

Hi I didn't know where to post this
my internet speed been groin crazy
its goes fine then at some point all the speed drop the lights flickers
only in wifi tho
I called my ISP they said it the signals from the wireless phone
called my friend he says its signals from other routers * I live in a building around 16 ap 4 per floor*
both said to connect via either
a lot of my usage is by phone so I use wifi
any one have any solution for it ?
 

A:Internet speed

Eliminate the possibilities.

Turn off the wifi, connect to router via cable only. Is it still slowing down? If yes, it's something related to wireless. Then continue troubleshooting.
 

http://www.techspot.com/community/topics/internet-speed.204286/
Relevancy 23.65%

Hi All,

I'm really struggling here. I've just purchased some Corsair DDR3 Vengeance Pro Series Red DDR3 Memory with the Specs CAS 12-13-13-35, 1.65V at 2666MHz. I got 2 sets (2x4GB per set, 16GB overall, all 4 slots are occupied). When I choose the XMP profile, the computer fails to post, it resets and then tells me "overclock failed". To get it to boot I set the speed to 2133MHz and it is now stable.

MoBo is an Asus Maximus Vi Hero (Z87) and a Haswell Core i7 4770K with a H60 closed loop on it.
Power supply is a Corsair AX750.

My question is, why can I not hit the advertised speed of 2666MHz? Do I need to send more voltage through them?

Thanks for your help in advance.
 

http://www.techspot.com/community/topics/ram-xmp-profiles-fail-to-reach-targeted-speed.203152/
Relevancy 23.65%

Ok, so I just recently upgraded to a Cat6 cord, I needed a longer cord and the only ones being sold where the Cat6 so I had to get it. Before I installed it, I had a Cat5E, my speed listing was about 3.8mbps give or take.. yeah crappy verizon DSL. But after hooking up the Cat6, I'm now getting about 1.2mbps. I'm rather confused on this, cause from what I read and what I know, that shouldn't cause my speed to dive bomb. And I know it's dive bombed even without the speed test, cause everythings slowed down, loading webpages, gaming, it's all miserably slow. So, I'm at a loss, did I somehow install it wrong? Did I not appease some Tech god before doing it right? Or, perhaps a faulty line?
 

A:New Cat6 cord, killed internet speed

Temporarily use the 5e cable again? See if it goes back to previous speed.

My guess would be this should not happen. The cable I would think is sort of a go or no go situation, meaning it works or it doesn't. I'm sure you can have cables with some 'damage' that work but at reduced capacity, but 5e and 6 should be capable of doing 1000Mbps, so when you are talking about a decline from 3.8 to 1.2 that is minuscule compared to what the cable should be capable of, so I really doubt the cable is at fault. Just a weird coincidence based on the information you've given us.
 

http://www.techspot.com/community/topics/new-cat6-cord-killed-internet-speed.202836/
Relevancy 28.38%

I have overclocked my 8120 to 4.5 ghz on a evo 212 with dual cooling.
The temps are never going above 50 C when playing games, but go to 80 on prime 95.
Can I still keep the overclock if these temps never break 50C?
 

A:8120 overclocked to 4.5GHz runs at 80C in Prime 95

If it's stable running prime95, it's fine. 80 is actually okay.
 

http://www.techspot.com/community/topics/8120-overclocked-to-4-5ghz-runs-at-80c-in-prime-95.188890/
Relevancy 29.67%

Hello,

I recently put togheter a smaller gaming PC in a Bitfenix Prodigy case and I am abit worried about the heat. I was warned before I put it toghether that the case would not handle heat too well but it am only worried about the CPU to be honest.

I have an i5 3570 and when I run BF4 maxed out it seems to be around 60-70c on all cores. Is this dangerous and do I need to get some form of cooler?

the GPU hasnt gone above 50c yet so it only seems to be the CPU that runs abit hot?

I have not been able to try something more demanding then BF4 yet.

Any advice is appreciated.

Thanks!
 

A:CPU runs at 65-70C, dangerous?

I'm assuming that you are using the "Stock" cooler that came with i5, and not leaving it without one ("... do I need to get some form of cooler?"). If that is the case then you dont have much to worry about. Those are temps that are under load, so they are in a safe range for the CPU. If you are worried about heat building up with the CPU (or plan on overclocking), then I would suggest getting an aftermarket cooler. That would of course be based off what kind of budget you may (or may not) have. Getting an aftermarket cooler will lower the temps (idle and under load), and give you peace at mind. If you need more help with selecting one, please tell us what budget you can put towards purchasing one.
 

http://www.techspot.com/community/topics/cpu-runs-at-65-70c-dangerous.200756/
Relevancy 24.08%

Can processor speed be increased without changing or removing any harddware
 

A:Processors: Can speed be increased?

Depends on your specs and what you mean by increase.

Some processors are unlocked and can be over-clocked by increasing the processor frequency multiplier (which is multiples of the system bus frequency). This only effects the stability of the processor if clocked to high.

Many systems even if the processor is not unlocked, can still be overclocked by increasing the system bus frequency. Changing this frequency effects everything in the system, which can cause system instability with anything.
System builders will lock both system bus and frequency multiplier, by customizing the system BIOS. Limiting the BIOS is the number one reason, I do not like prebuilt systems.

 

http://www.techspot.com/community/topics/processors-can-speed-be-increased.200569/
Relevancy 24.08%

Hello ?
Recently, I need more speed for my computer.
Basically I want upgrade hardware but I am not expert: I need some advice.
I am using my computer for Computer Animation: Mostly Autodesk Maya.

I am in the middle of learning Animation Part and realize if I am going to use MentalRay with Animation,
I have to wait a long time [I believe].

Currently my computer's spec:
i5 2500K.
ASRock P67 EXTREME 4
8GB of RAM
GTX 560TI of 1GB

Which hardware should upgrade ?
 

A:I want to make more speed for 3D Tool - mainboard

Budget?
 

http://www.techspot.com/community/topics/i-want-to-make-more-speed-for-3d-tool-mainboard.200200/
Relevancy 24.08%

Is it normal for the fan speed on my Radeon 4800 to be 0 when the card temperature is 71 degrees C?
 

A:Radeon 4800 Fan Speed is 0 at 71 degrees C

Nope.

Download MSI Afterburner, see if you can manually change the fan speed.
 

http://www.techspot.com/community/topics/radeon-4800-fan-speed-is-0-at-71-degrees-c.199553/
Relevancy 23.65%

I have a SONY Handycam that uses MP120 8mm Video Cassettes. I used this Handycam to tape home videos. When I use the playback feature on the Handycam it seems as if it is playing back in a slower speed. When I connect the Handycam to my computer and play back, it does the same thing. It is as if the camera was recording at a wrong speed. Is there any way I can control the speed of the video camera via computer, so that I can get the home videos transferred to DVD?
 

http://www.techspot.com/community/topics/8mm-home-video-playback-wrong-speed.199460/
Relevancy 24.08%

So I just installed my 8350 about two days ago and I just found out that it isn't running to its full potential. It's running at 2812 MHz. when it should be running at at least 4k MHz. I tried running my game to see if it will go up and maybe its just idle to save power but that did not work. Then I went into my bios and turned off all my C-State (c1e, c6 are the only two I have). And that did not do the trick and I have ran into a brick wall. Please help me.
 

A:AMD 8350 Not getting correct speed

I have 3 possible solutions to the issue: 1) The CPU is flawed. 2) You are in a power saving Windows state. 3) Your CPU is running hot, which will throttle its speed to something lower.

In order to check whether your PC is in a power saving mode, go to the start menu and type in "power options". Choose the one listed under "control panel". Once you click it, it should bring up a window that tells you what power state you are in. Choose the "Balanced" plan if it is in power saving mode and see if that helps.

Secondly, download and run RealTemp and tell me what the CPU temperature is at idle and when gaming.
 

http://www.techspot.com/community/topics/amd-8350-not-getting-correct-speed.199067/
Relevancy 51.17%

Hello,

I have a Dell Latitude D620 laptop that I bought in 2006 and it runs EXTREMELY slow, whether I am on the Internet or just doing basic tasks in Windows or MS Office. It has Windows XP, some basic software (like MS Office), and only a few files (because the hard drive crashed last year, so I only put a few files back on it, after installing the new hard drive). I know it's relatively old, but is there ANYTHING I can do to increase the speed of the computer, without buying additional memory? Any help I can get with increasing the speed will be greatly appreciated.

Also, I don't know if this is a different issue, but sometimes the laptop seems to get too hot (at the bottom) after being on for too long.

Thanks in advance.
 

A:Dell laptop runs extremely slow - need help boosting speed

First, make sure your vents are clear of dust. Heat can cause all kinds of issues. Do you have a cooling pad?

Second, have you scanned for infections?
 

http://www.techspot.com/community/topics/dell-laptop-runs-extremely-slow-need-help-boosting-speed.167636/
Relevancy 27.09%

Howdy all The amazing folks at Tech Spot saved my bacon many moons back helping me fix a virus laden laptop for Brand New to can't HP connect 17 Internet Envy Quad Touchsmart my sick kid And so I turn to Brand New HP Envy Touchsmart 17 Quad can't connect to Internet you with my latest computer nightmare and beg of your assistance once again I just bought a new HP ENVY TouchSmart t-j Quad Edition Notebook PC ENERGY STAR for my daughter for Christmas It arrived yesterday and I opened it up to start preloading her software onto it so she can have it ready to go Christmas morning Unfortunately the thing just won t let me get connected to the internet via wifi It is using an Intel Wireless-N adapter running Windows factory installed I have tried everything I could think of - using Intel drivers instead of Microsoft ones resetting WINSOCK flushing the DNS using a static IP instead of dynamic the works Nothing appears to be working The device can clearly see my network - it shows up on the list of connections and validates my security information running standard WEP security - not the best I know but it s easier for the multitude of tech I have on my network all of which connects fine but it only gives me limited access and does not want to connect to the network or the internet My base system is running Windows My router is a Netgear Rangemax Wireless-N Gigabit Router WNR v I have not tried a hardwire connection yet as I really need this to be a wireless device Help me TechSpot Gurus you re my only hope nbsp

A:Brand New HP Envy Touchsmart 17 Quad can't connect to Internet

Hey Mark. I would connect to the Net by cable and allow it to get any OS updates and/or driver updates before I change any settings.While online,try to connect wirelessly to see if it finds any updates quicker.
 

http://www.techspot.com/community/topics/brand-new-hp-envy-touchsmart-17-quad-cant-connect-to-internet.198670/
Relevancy 24.51%

Hey guys. I am doing a project that compares the relationship between population and internet speed. I was really hoping that you guys would help me out and provide some data for me. Please leave comments with the following information
What's your up/down speed? (speedtest.net results preferred)
What's your local area population?
What's the population of the nearest city?
Any replies would be great, thanks all.
 

A:What's your internet Speed?

I'm pretty sure there's a thread for this already - I'll link it when I get a chance to search.
 

http://www.techspot.com/community/topics/whats-your-internet-speed.198656/
Relevancy 23.65%

http://www.corsair.com/en/blog/bf4-loves-high-speed-memory

This was posted by Corsair a couple of days ago. What does everyone think? Is this just an attempt to get people to upgrade to shinny corsair ram, or is this finally a reason for gamers to have good ram/ overclock our current sticks?
 

A:Battlefield 4 loves high-speed memory?

No way the average FPS increases by 20 just by adding faster RAM (1920x1200 ultra graph)... BF3 barely gains 3 FPS from high speed RAM. It is just bloated graphs and marketing.
 

http://www.techspot.com/community/topics/battlefield-4-loves-high-speed-memory.197380/
Relevancy 27.09%

Hey guys,

I'm needing some information that is extremely hard to come by.

The 740m in the HP Envy 17t-j000, does anyone know, or does anyone know WHERE to look (Google failed me, or I failed Google!) to find out whether it needs ACTIVE displayport -> HDMI adapters?

I question this because I know the 57xx series from ATI required active. The card only supported 1 RAMDAC signal (or something?) and the Nvidia's tech seems different. According to HP support, passive will work fine. I need to have the adapters ordered ASAP, but I do not want to order the incorrect ones.

Any assistance is appreciated.
 

http://www.techspot.com/community/topics/hp-envy-17t-j000-w-740m-triple-monitor-setup-questions.197029/
Relevancy 24.08%

Hello,
recently my old router died, so I bought the new one. I connected it to my PC, entered my ISP information. It's working, but kinda slowly. My ISP speed used to be 10MB/s, but now I'm downloading torrents only with 1MB/s. Task manager shows that network is used by 10% since I have my adapers speed and duplex set to auto negotation. Do you have any ideas how to fix this?
EDIT: I use cable connection.
 

A:New router slow down speed

Disable QoS on the router and the PC
 

http://www.techspot.com/community/topics/new-router-slow-down-speed.196808/
Relevancy 24.08%

So this is my current situation.
http://www.speedtest.net/my-result/2917185658

I don't know why my download is so low, sometimes it's skyhigh (~60mbps) and sometimes it doesn't even make the 1 mbps I'm hooked on straight to our main modem I even put off Wi-fi and everything and I still have around 5mbps please help
 

A:Having problems with my download speed

Contact your ISP and tell them your download rates are fluctuating. They have ways of testing for problems with the lines.
 

http://www.techspot.com/community/topics/having-problems-with-my-download-speed.195611/
Relevancy 24.51%

I just did a couple speed tests on my computer.
The first one was 285pc Ping. 2.40mbps Download speed. 0.56 Upload speed.
The second test was 265pc Ping. 2.20mpbs Download speed. 0.60 Upload speed.
Are these numbers good? Thanks Ray ( hope I put this in the right forum)
 

A:Speed tests

With the exception of ping, they are nearly the same as what I have. Ping is a measure of time it take to get a response from a server. You could try a different server for different response times. However there are numerous reasons for fluctuation ping results, which could simply be a bad day.


 

http://www.techspot.com/community/topics/speed-tests.195079/
Relevancy 28.38%

When I bought this computer it had windows 7 on it. it ran everything lag/shutter free. I have since upgraded to windows 8 then to 8.1. The problem is the audio and video noticeably lags/shutters. As if the entire computer is pausing. I have talked to HP tech support and they only reinstalled the drivers. All drivers are current. I am fairly sure it has something to do with the HD4k graphics but I do not know for sure. I was hoping the 8.1 would resolve the problem but it has not. I have this problem whenever I watch videos (on the internet or from file) and when I play World of tanks. Any help would be great
 

A:HP envy 1038-nr

I seen similar comments re "since upgrading to Win/8" and (imo) think the drivers are not 'fully compatible' with the new system.
 

http://www.techspot.com/community/topics/hp-envy-1038-nr.194074/
Relevancy 24.08%

Hello guys,

I have an USB flash memory brand PNY. Its speed is very low, that is, when I copy or delete files into/from it, it takes a very long time to be done. Is there a way to speed it up?

Thanks.
 

A:Speed the USB flash memory up

NO. Most likely you have it inserted to a USB 1.1 slot when it needs USB 2.0.
 

http://www.techspot.com/community/topics/speed-the-usb-flash-memory-up.193713/
Relevancy 24.08%

Hello all members,
I was searching for dedicated server for one of my clients and whenever I find a new host, I try to test dedicated server speed by downloading sample files. Recently, I have tested atlantic.net dedicated server speed, but how can I be sure that this speed will remain the same for my client's after buying?

FYI, here is the link from where I have tested dedicated server speed:




atlantic.net/dedicated-servers/dedicated-server-speed-test.htmlClick to expand...


 

A:Dedicated server speed test

Hmm; would appear that you are referring to a network bandwidth test.
However, as I write this Atlantic.net is DOWN - - ping just gets 110% timeouts.

This link has some reviews you might like to see.
 

http://www.techspot.com/community/topics/dedicated-server-speed-test.192319/
Relevancy 35.26%

Greetings all hope you are doing fine Situation - I have a Mb DSL connection - Speed while downloading a file using Internet Download Manager is between - KB sec - Browsing streaming speed is between - KB sec - Speed while downloading a file using any browser is between - KB sec - Downloaded the TCP Optimizer and applied the Optimal settings Did not solve the issue - Followed the instruction here gt gt http www speedguide net articles w -tweaks- Did not solve the issue - TCP Analyzer is saying that my MTU is but in my router and in my NIC it is - Speed Test in Safe Mode can sometimes yield better results - Tried disabling all start-up items Did not solve the issue My setup OS Windows x NIC Atheros AR AR AR Router SMC WBRA Connection Type Ethernet ----------------------------------------------- Speed Test Results SpeedGuide net TCP Analyzer Results Tested on IP address xx xx proxy Client OS browser Windows Chrome TCP options string c MSS MTU TCP Window NOT multiple of download speed Fast browsing/streaming low speed, MSS RWIN Scaling bits Unscaled RWIN Recommended RWINs BDP limit ms kbps KBytes s BDP limit ms kbps KBytes s MTU Discovery ON TTL Timestamps OFF SACKs ON IP ToS ------------------------------------------------ Thanks nbsp

A:Fast download speed, low browsing/streaming speed

Set the MTU in the router itself to 1492





Analyzer is saying that my MTU is 1460, but in my router and in my NIC it is 1500Click to expand...

the normal value for DSL is 1492, and 1460 is INVALID = = must be a multiple of 8.

Manually set {1472 or 1464} in the router.

The article cited has good info but I would opt for all the defaults.

restore:

netsh int tcp set heuristics enabled
netsh int tcp set global autotuninglevel=normal
netsh int tcp set global rss=enabled

see this article to set SackOpts=1
 

http://www.techspot.com/community/topics/fast-download-speed-low-browsing-streaming-speed.192638/
Relevancy 29.24%

New here so not sure where to ask this question and hope I'm in the right place. When my pc sits idle for a while, the fan starts to run & doesn't stop when I move the mouse to come out of sleep. The fan runs with nothing happening & the screen remains black. The only way to stop it is to power it off. I can wait a minute & power it back up. It re-boots & everything appears to be fine after that. The power button also blinks more times than not but everything seems to be running okay. When the computer sits idle again for a period of time, I go through the whole thing all over again. Can anyone offer a resolution to this or can I expect my pc to go out on me in the near future?

Thanks,
Heelsfan
 

A:PC fan runs when my system is idle

Try changing the power-down settings for your drives, CPU, etc. in Control Panel/Power Options/Edit Plan settings/Change Advanced Power Settings - there you can configure all power options for all hardware. Try changing just one setting at a time and waiting to see if the problem goes away. That way maybe you can figure out what is causing the problem. If nothing else works, try disabling CPU c-states in the BIOS. Certain hardware and software configurations have conflicts with Windows and can sometimes be fixed by changing settings. Also, make sure all fans and heat sinks are free of dust (by blowing out with compressed air if possible).
 

http://www.techspot.com/community/topics/pc-fan-runs-when-my-system-is-idle.191119/
Relevancy 24.08%

Basicly the core i5-3570k is running at 1600 when im just browsing the internet and I dont really like that so is the ram which si running at 680 mhz while it shoud be 1600 how to fix this I know that it goes to these figures just to save energy ect but I dont like it
 

A:I5-3570k core speed

Change your computer power options to 'High performance'. That will fix the issue.
 

http://www.techspot.com/community/topics/i5-3570k-core-speed.191059/
Relevancy 24.08%

Hi folks, I'm having problems with my wireless connection on my desktop computer and I'm really stuck! The signal regularly drops to 1 bar and the speed will fluctuate anywhere between <1Mbps up to 11Mbps (although it's usually at the lower end), and sometimes it will lose connection with the router all together.
I've used a Belkin USB dongle and more recently a TP-Link PCI Express card, both N150. My router is a D-Link N150. Both the dongle and the adapter have had the same issues. In comparison, my Lenovo Z570 laptop and before it got destroyed my housemate's HP laptop had no issues, which basically leaves me with just my PC as a possible cause or some sort of setting somewhere.

PC spec:
Motherboard: Asus P7H55-M LE
Processor: i3
OS: Windows 8

If anyone has any ideas I would be really grateful!
 

A:Wireless speed/signal problems

Does your router have a password? Someone could be stealing bandwidth.
 

http://www.techspot.com/community/topics/wireless-speed-signal-problems.190958/
Relevancy 24.08%

Hey guys I just got a new modem and ii was geting 2Mb's down and like 0.10kb/s up, And since I got my modem they said im gonna get 4Gb download for web pages its the same time..... only my speed has went up http://www.speedtest.net/result/2568698551.png
 

A:Internet speed confusion

What is your question here my friend. Why did this occur?
 

http://www.techspot.com/community/topics/internet-speed-confusion.190594/
Relevancy 24.51%

Hello, I bought a new 600w Ocz MoxXStream-pro Psc the other day. I set it all up correctly, then it on then slowly increases after it asks me to press F1 to continue the fan speed increases then hits 100%. Windows loads up and all that. So I checked everything over, put new thermal paste in. But still the Cpu fan is hitting 100% speed. This really concerns me... Please, can anyone help me? I put in the old Psu and everything runs fine.I really don't understand...

System Dell xps 420, Evage 650Ti, 750gb Hdd.
 

A:PSU causing 100% fan speed

Don't know about the xps 420, but many Dells have proprietary PSUs and motherboards with connectors that may or may not conform the the standard ATX specs for pinouts. Check the Dell website or google it, someone has undoubtedly run into this problem before with the xps 420. Also could be faulty PSU causing mobo to go into survival mode.
 

http://www.techspot.com/community/topics/psu-causing-100-fan-speed.189700/
Relevancy 23.65%

I've copying files from one external hard drive to another and though both are USB 3 the transfer rate is 4MB/s or less. What is up? Both drives have been much faster by themselves.
 

A:Transfer speed between two external hard drives is 4MB/s :(

What kinda files? Lots of small files don't do well.
 

http://www.techspot.com/community/topics/transfer-speed-between-two-external-hard-drives-is-4mb-s.189385/
Relevancy 23.22%

Hi,

I need a help to resolve one issue with my Belkin router F7D4402 v1. I have got it recently and configured it without any issue and my internet (ADSL) was up and running. However, later I have noticed that, my internet speed is limited to 1.5 Mbps. whereas; the speed I was getting on my old Linksys WAG200 router was minimum 2.0 Mbps.

I have tried to disable the QoS and other options but no use. But when I enabled the Mac cloning it worked fine. I was getting the speed I subscribed for, but unfortunately, the other devices on my Wi-Fi stopped working. With Mac clone enable, the internet is only available to my PC.

I need the internet on my PC plus all the Wi-Fi devices in my house and along with it my full internet speed, not just 1.5 Mbps.

Can anyone please help to fix the issue?

Thank a lot.
 

A:Belkin router F7D4402 v1 ADSL speed is fixed to 1.5 Mbps

It's not the router - - you up against the limit of ADSL.

see this description
 

http://www.techspot.com/community/topics/belkin-router-f7d4402-v1-adsl-speed-is-fixed-to-1-5-mbps.188430/
Relevancy 24.51%

I am paying for internet high speed 3 MBPS
just did a speed test my internet speed is Ping 155 download 0.56 upload 0.31
This is DSL
I have just called Windstream and there looking in to it.
My Qustion is where should I be at with 3 Mbps?
 

A:Need to know more about Internet speed

See this post
 

http://www.techspot.com/community/topics/need-to-know-more-about-internet-speed.188227/
Relevancy 24.08%

Hello

I have a question regarding the speed of an HDD. How fast would an HDD need to be to match the write speed of a 520mb/s SSD?

Is there anyway for me to look this up somewhere with a converter or something?

Thanks
 

A:SSD compared to an HDD in terms of speed

Not sure I understand the question. The mechanical drive would have to be just as fast 520mb/sec. Unless you mean spin speed, and thats somewhat unrelated.

What you might be questioning is megabits vs megabytes. Megabit should be written as Mb, and Megabyte is MB. But in reality there is a ton of misuse of the correct capitalization and ways to write it. I'm sure I've screwed it up a few times on these boards myself. So in a bit to byte conversion, just divide the bit number by 8.
 

http://www.techspot.com/community/topics/ssd-compared-to-an-hdd-in-terms-of-speed.186705/
Relevancy 23.65%

My core speed or the multiplier don't drop in idle
bios setup everything is automatic
http://www.facebook.com/photo.php?f...5272.301415.589480272&type=1&relevant_count=1
core i7 980x
x58-ud7

I also when I get into bios same thing no drop
latest bios and default setup
 

A:Core speed or multiplier don't drop in idle

Hmm; I'm sure these are the FIXED ratings of the chip, not the ACTIVE usage.
The Win/7 Task Manager->Performance->Resource Monitor clearly shows active usage.
 

http://www.techspot.com/community/topics/core-speed-or-multiplier-dont-drop-in-idle.185031/
Relevancy 35.69%

Last week I have purchased a WD TB Green Drive as well as fast speed slow but write Green 2TB WD read has My speed a non-raid capable raid card Rosewill RC- since my older PC WinXP Celeron D GB RAM does not have SATA ports I have installed fresh drivers form Rosewills website even though they are not needed for non-raid configurations The PC recognized the card right away as well as the My 2TB WD Green has fast write speed but slow read speed HDD The write speeds are as expected however the read speeds are between KB and KB I cannot figure out why the read speeds do not exceed MB I have plugged the HDD as an external drive via USB and the read My 2TB WD Green has fast write speed but slow read speed write speeds are as expected Anyone knows why and how to fix it Update I have tried TB WD green drive -year old and it works as expected Update I have just spoken with Rosewill tech and he said that using PCI card and such a large drive it is expected to be slow Personally I believe it is B S You P S for moderators I have similar thread under storage and networking but it no longer applies as such issue Please delete it nbsp

A:My 2TB WD Green has fast write speed but slow read speed

The Rosewill card's transfer rate is "up to 1.5GB/s." The WD hard drive's is 3.0Gb/s. Perhaps if you set the jumper on the 5-6 pins to activate the 1.5GB/s rate per this instruction: Western Digital.
 

http://www.techspot.com/community/topics/my-2tb-wd-green-has-fast-write-speed-but-slow-read-speed.152655/
Relevancy 21.07%

Hello.
I have this new PC:
CPU: I-5 2500 (without the 'k') @ 3.3Ghz
GPU: ASUS GTX 580 direct cu II overclocked to 878 Mhz
Motherboard: Intel DH67CL
RAM: APACER 8GB DDR3 @ 1333 Mhz

I was trying to play Rome: Total War (a game made way back in 2004) at max settings and at 1600x900 resolution (which is the max resolution of my monitor) and I get an average framerate of 20 fps, often even lower. So I checked GPU usage during the game, turns out it never reached 20%. But when I lowered the graphics settings, the fps immediately jumped to 60. As far as I can tell from task manager, there seems to be high CPU usage during gaming, but it doesn't tell how much exactly. So does this mean higher graphics settings require faster CPU clocks and not just a faster GPU? Or does it just mean there's a stability problem with my PC that's affecting its performance?
 

A:Do you need higher CPU speed to play at higher graphics settings in games?

What power supply do you have?
 

http://www.techspot.com/community/topics/do-you-need-higher-cpu-speed-to-play-at-higher-graphics-settings-in-games.183570/
Relevancy 31.39%

Is this even possible? Ive never seen a download speed so low, I cant even watch youtube, and forget netflix. Yet my upload seems to be through the roof. What is causing this? .58mb/s DL with a 43.26mb/s upload @ 5 ms ping.
 

A:Extremely low download speed and extremely high upload speed

Might I ask what time of day you did that test? In My Opinion, the Internet is like the Interstate. You can't go fast at rush hour.
You should try it at different times of day to see if it changes.
You could even try another test site http://www.internetfrog.com/mypc/speedtest/
http://reviews.cnet.com/internet-speed-test/ http://www.speakeasy.net/speedtest/
http://www.dslreports.com/stest
Good luck
 

http://www.techspot.com/community/topics/extremely-low-download-speed-and-extremely-high-upload-speed.184515/
Relevancy 24.08%

I dont get the internet speed that my isp offers me.
like when I surf pages and load videos it is very slow, but on the other hand my isp offers me 1mbps.
when I login to safe mode I feel that the internet there is very fast but in normal mode it is slow.
some times I get speed of 1.5mb/s from the isp and normally I get 70 kb/ps which is really slow and nothing compared to what I should be getting.
can u please fix this issue as well.
 

A:Slow Internet speed

I don't know that I can't fix your issue, but I can help you check for what might contribute to the slowdown:

What type of connection do you have: Dial-up, cable or DSL?
Click on Start> Settings> Control Panel> System:
[o]What is the operating system?
[o]How much Ram is installed?
Click on Start< Run> type in msconfig> Enter> Choose Startup tab
[o]How many boxes are checked?
Right click on the Taskbar> Task Manager>(in Normal Mode)
[o]Processes tab> Look at the bottom and tell me how many processes are running
[o]Performance tab> Look on the bottom for the Physical Memory
[o]How much Total Memory?
[o]How much Available Memory?
[o]How much is in the System Cache?
================================
When I have the information from the 4 questions above, I may be able to help you.

Logging on to Safe Mode will prevent some drivers and Services from running, so the system will move faster, but you will be able to do less than in Normal Mode.

In Normal Mode, everything you have checked on the Startup Menu to start on boot has to load. Most of those processes will run in the background. This can slow you down.
-----------------------------------------------------
 

http://www.techspot.com/community/topics/slow-internet-speed.183528/
Relevancy 23.22%

Ok so I have a Cisco Linksys E Wireless router Over the past month I have been experiencing severe internet speed loss due to troubles with the router and the temporary fix for it untill now was rebooting it I have recently found out that the problem causing this was heat Yes HEAT The router kept getting too hot So what I did for now is I made a prop decreased wireless Internet for routers for fixing Suggestion speed for it to raise it up off of the table a little bit then took a little space heater set to Cool and stuck it in front of it Now I believe I have fixed the problem because I have not experienced any more bitrate loss Suggestion for fixing decreased Internet speed for wireless routers yet I am planning on rigging a computer fan to it because this small space-fan is proving to be too powerful to be an efficient fix it s blowing cold air rather than warmer air like you see with computers and consoles The only problem is it s my parents router and I will have to figure something out that won t modify it at all Hope this helps anyone having the same problem nbsp

A:Suggestion for fixing decreased Internet speed for wireless routers

I have the same router Linksys E2000 Wireless router. It never gets very hot. Where do you have yours sitting. If it getting that hot you need to put a fan on it. It very well may be going bad.
 

http://www.techspot.com/community/topics/suggestion-for-fixing-decreased-internet-speed-for-wireless-routers.183213/
Relevancy 24.08%

Hello all,

I'm having an issue with the internet speed on my desktop computer that runs Windows is going much slower (as measured by FTP downloads) than my Mac laptop.

Both are wireless. When I download a large file, the mac computer will routinely go significantly faster (4-5x) what the Windows computer will do. The Windows computer seems to have a cap at about 200-250kbytes/sec.

Now, I just reinstalled my O/S and so I'm on a clean reinstall of Windows, and it's *still* happening, and I'm puzzled.

A few things I think it might be:

- My Macbook wireless is integrated, whereas the Windows wireless is through a Belkin F5D9050 USB connector ("Wireless G Plus MIMO")
- Perhaps there's a limiting issue on the Windows motherboard?
- Maybe something limiting within the Windows firewall or registry settings.

Any suggestions to fix this?

Thanks!

Jack
 

A:Internet speed throttle problem

I don't know, so take my comments with a grain of salt until someone else replies..

Try switching the wireless channel on the router.. For an N router (perhaps others) there are typically 11 channels. Try 1 or 11, something on the ends.

Does your windows machine have a better transfer if you bring it really close to the router?
 

http://www.techspot.com/community/topics/internet-speed-throttle-problem.182639/
Relevancy 24.08%

About 5 months ago I could download a game at speeds around .8 or .9 megabyts p/second. Now, for whatever reason, my computer is never jumping above .38 m/p/s...
Also, for whatever reason, I see that some of my processors out of four will jump up and down in usage for no reason. I would have my 2nd and 3rd proc's just jump up and down to 80 percent workload and then drop for two seconds, just to repeat the cycle perfectly.. Im not sure if that has something to do with it, but it's certainly an issue id like help on. I really do appreciate and knowledge on this problem that you would be able to share with me.
Also the speed of my download will drop to about .013 m/p/s for maybe a minute, the go back to the classic .39 :/
 

A:Processor and speed issues

I would suggest starting here.

http://www.techspot.com/community/t...lware-preliminary-removal-instructions.58138/

Sounds like malware or something to me.

Ensure your antivirus, firewall and windows are up to date and run a full scan.
 

http://www.techspot.com/community/topics/processor-and-speed-issues.181503/
Relevancy 24.08%

About 5 months ago I could download a game at speeds around .8 or .9 megabyts p/second. Now, for whatever reason, my computer is never jumping above .38 m/p/s...
Also, for whatever reason, I see that some of my processors out of four will jump up and down in usage for no reason. I would have my 2nd and 3rd proc's just jump up and down to 80 percent workload and then drop for two seconds, just to repeat the cycle perfectly.. Im not sure if that has something to do with it, but it's certainly an issue id like help on. I really do appreciate and knowledge on this problem that you would be able to share with me.
Also the download speed of the game can drop to about .013 mb/p/s for maybe a minute, then jump up to the classic .39 :/
 

A:Recent Internet speed issues

Well anything less than 1Mb/s is pretty slow in this day & age, I hope you are not paying out the wazoo for this connection. Processors spikes are normal, programs & services running in the backgroud of a system can cause them pretty consistently. Now that being said, sometimes it can be something bad like a malware/spyware program running in the background chewing up CPU cycles. Either way, here's what I want you to try...

1st: Boot your system into safe mode w/ networking. (F8 at boot & choose accordingly)
2nd: Now that you are in safe mode, do an internet speed test & see what the speeds are. good sites to test speed are: http://speedtest.net/ and http://www.speakeasy.net/speedtest/ take a screenshot & post speeds from safe mode, then again from normal mode.
3rd: watch your CPU graph, see if it spikes as consistently as it does in normal mode.
4th: reboot into normal mode & run speedtests again, compare the two. if it's much better in safe mode then there maybe something running in the background chewing up CPU cycles or killing your bandwidth.
5th: download speccy http://www.filehippo.com/download_speccy and post back the results as a text file. speccy shows what your computer has in it & it shows processes running, etc.
6th: post back here on the forum with your results
*Note: if it's something running in the background or a potential virus/malware/spyware issue, this question may be better answered in that area of this forum. unfortunately, we are not all knowledgeable in all areas of the computer world. the folks over in that area of the forum are much better at troubleshooting issues with bogus stuff on a computer than me.

Hope this helps, take care!
 

http://www.techspot.com/community/topics/recent-internet-speed-issues.181502/
Relevancy 28.81%

I am having trouble fixing an HP G60 230CA Notebook PC. The Laptop uses a 32 bit Windows Vista OS. It takes about 4 min to Start up and it takes about 2 min to open or close any programs.

In safe mode it runs normally for about 45 sec then enters the same state as normal mode.

I removed the hard drive and used a SATA to USB wire to connect it to another PC to run Malware bytes. Malware Bytes detected and removed a trojan but the problem hasn't changed.
 

A:HP G60 notebook runs at a snail's pace

How ole is the computer. How old is the hard drive? How much memory is installed? What scans have you already run to search out the cause of the problem?
First thing I would do is save all my data and images to recoverable media, and run a clean re-install.
 

http://www.techspot.com/community/topics/hp-g60-notebook-runs-at-a-snails-pace.179389/
Relevancy 23.22%

I have a Toshiba satellite a d-s The specs for this can be found here reviews cnet com laptops toshiba-satellite-a d-s - - html Sorry for no link but I am apparently not allowed to do that yet I bought it new and it came with windows vista A couple (Toshiba speed High host issue Satellite) controller years later I upgraded to windows Upgrading to the new OS was fine but then later I needed to upgrage yet again to bit This unfortunately was not as easy and I need to wipe the drive clean and start fresh Now there are a couple issues with the host controllers the main being that I keep getting warnings saying that the devices I plug in can run faster if I were to use a high speed High speed host controller issue (Toshiba Satellite) port This confuses me because the USB ports are but they are acting like they are I have done everything I can think of to get these to function correctly but nothing I do seems to work The second issue which isn t as annoying is that when I move the screen the sound for High speed host controller issue (Toshiba Satellite) connect disconnect a USB device is played and the little popup for quot new device connected quot is shown I am unsure why the screen is acting like it s a USB device I have disabled the notifications and sounds for all ports now but I would kind of like to know why this is happening Do anyone know how I can solve these problems I have checked multiple forums and have been searching for an answer for about months now with no luck I think I have provided enough information but if anyone needs more just let me know and I will be happy to provide it Thanks nbsp

A:High speed host controller issue (Toshiba Satellite)

Are there any yellow exclamation points in the device manager?
 

http://www.techspot.com/community/topics/high-speed-host-controller-issue-toshiba-satellite.178296/
Relevancy 29.24%

My specs are:

8GB System RAM
I play at 1920x1080 resolution!
AMD Quad-Core 2.4GHz rated at:
ATi Radeon HD 6550D (D is for Desktop graphics, f*ck laptops.)
1TB HDD
Genuine Windows 7 Home Premium, 64 bit.

I thought of downgrading to Windows XP. Should I? (Pirated) and please realize in GTA IV, under "Display" my available video ram is 489... wow. WTF, I haz 4GB's that is must not be interpreting. I so hope GTA 5 Isn't this much of a disaster!

Um, anything else I should add? According to "Canyourunit.com" I'm BEAT recommended, but I only get 1-10 FPS. Please help me?
 

A:GTA IV runs slow, but I have a powerful rig?

Sorry to break it to you, but, no you don't (have a powerful rig)...at least by GTA standards.

Firstly; All the GTA series are CPU clockspeed sensitive. 3.4GHz I would consider "entry level" for the most part, and anything above this would definitely be better.

Secondly; Your graphics card....basically NO, unless you're turning down the graphics options (esp. draw distance) way, way down and using a low screen resolution. Personally I'd place as much faith in "canyourunit" as I would in used car salesmen. You can try YouGamers but this is also going to be very optimistic
 

http://www.techspot.com/community/topics/gta-iv-runs-slow-but-i-have-a-powerful-rig.177615/
Relevancy 24.51%

I currently have a desktop with a single core AMD Athelon 2.08 GHZ, 1 GB ram running XP. I am planning on using an older laptop in its place. HP NC6400 Intel 1.6GHZ Centrino duo ,3 GB ram running Windows 7. Will I notice a slower performance with the laptop?
 

A:Processor speed

Judging from PassMark.com benchmark scores.

AMD Athlon XP 2800+ > benchmarks between 400 & 500
Intel Core2 Duo 1.6GHz > benchmarks between 800 & 1100

To answer your question, I don't see any reason why the laptop would be slower. The laptop has two times the CPU performance and three times the memory.
 

http://www.techspot.com/community/topics/processor-speed.176285/
Relevancy 54.18%

Yes i am running an HP Pavilion says hot CPU Speed runs to my fan with everything but hard drive and disk drives and ram stock My speedfan tells me my CPU is running between - c after applying new AS thermal past GB ram Motherboard manufacturer s name ECS RC -M HP Compaq name Asterope -GL E GHz Intel Pentium D PSU-Unknown i have a mm case fan and an mm fan i am using Speed fan says my CPU runs to hot to draw heat out also and i have the heatsink pulling heat away from the cpu What is wrong I am only running a web browser when the temps reach that high i am wondering if my CPU is going out on me or what is wrong i cannot figure it out for the life of me Everything else is running way cool just my CPU is running hot i touch my heatsink also and its cold as the dead so i am wondering if my cpu temp is not lying to me nbsp

A:Speed fan says my CPU runs to hot

Pentium D's run pretty hot anyway. So I don't think 73 is anything to be alarmed about. The only bit that seems a little concerning is that your heatsink feels cool, that is usually an indication you didn't get a good contact with the heatsink and cpu.

I'd say, if you aren't getting much higher than 73 and the system isn't locking up or rebooting then I'd just leave it how it is. That temp isn't going to kill the CPU.
 

http://www.techspot.com/community/topics/speed-fan-says-my-cpu-runs-to-hot.176191/
Relevancy 28.81%

My sony vaio laptop turns-off automatically when runs on battery. If it is on main power, no issue. Please suggest me whether its happening due to bad battery.
 

A:Laptop turns-off after 3 min when runs on battery

I suggest it's due to a bad battery.
 

http://www.techspot.com/community/topics/laptop-turns-off-after-3-min-when-runs-on-battery.175431/
Relevancy 24.51%

hi guys iv been trying to figure out why my usb is only running at fullspeed heres what iv done

reinstalled windows 3x
rest bios
up/down graded bios
all setting in bios are set to hi speed

i cant think of anything plz help
 

A:USB not at Hi Speed only at FullSpeed

How many MB/s are you getting?
 

http://www.techspot.com/community/topics/usb-not-at-hi-speed-only-at-fullspeed.175016/
Relevancy 24.08%

Hi I am just wondering why I get such slow download speeds when my internet is very good. I average around 300kb/sec but it fluctuates so much from under 100kb/sec- over 1mb/sec. Ive only seen it go as high as 1.4mb/sec correct me if im wrong but i do believe i should still get a higher download speed? below is a link to my speedtest .net....... 48mbits /sec download speed, 2.89 up speed, 18 ping

speedtest.net/result/ 1589552537.png
 

A:My download speed problems

Could be your provider. With whom or what service are you connected?
Also, it could be right there on your system. As you know, the actual usable speed is limited by the slowest component... software, memory, motherboard, etc.
Can you try it at a friend or other known connection that you know to be fast, as a first step?
 

http://www.techspot.com/community/topics/my-download-speed-problems.174881/
Relevancy 24.51%

I hear about fan rpm.
There are many sizes as far as I know (like 120mm etc)
SO I install a 120MM fan... which is 5.000 rpm let's say.
What is the difference with a 120mm fan of 1.000 rpm?
More means better COOLING -BUT- more SOUND? Which is the "normal" speed of a fan?
thanks
 

A:What is the normal speed of a fan?

Stock case fans are usually around 1000prm. Anything above 3000rpm would be very loud, search youtube to gauge the noise levels. I don't think they even go up to 5000rpm...
 

http://www.techspot.com/community/topics/what-is-the-normal-speed-of-a-fan.174346/
Relevancy 28.38%

i was facing the problem of the laptop compaque 2134 ad , abruptly shutting down and restarting , gicing blue screen with error msg on next restart ..... fan sound start stop with power light blinking etc ....... changed it with another old battery lying with me .... but the same problem .... then i noticed that ... with ac power , but no battery in the slot the machine is running fine ...... but with the battery in it ... it gets funny ........ please help me!!!
 

A:Laptop only runs on AC power without the battery in the slot

Buy a new laptop battery just like the one that originally came in the laptop. Don't trust old laptop batteries. They go bad just laying around
 

http://www.techspot.com/community/topics/laptop-only-runs-on-ac-power-without-the-battery-in-the-slot.173879/
Relevancy 22.79%

Hello I recently posted on this forum after having issues with my computer not booting Then the PSU literally blew up a day later Old System Specs Q MSI P N Diamond Silverpower sp w has good reviews just not well known Corsair GB HD The issue I had was turn on pc everything lights up but GPU fan spins at full speed as if it was getting no power or connecting to motherboard G-card will not boot at all I did however find a very strange work around To boot the machine I had to remove the pin CPU power on the motherboard Turn the machine on but no boot Turn it off and replace CPU power Turn machine back on and everything works perfectly So It seems that the card can never boot up from cold If I re-started it worked fine I now have a new motherboard cpu RAM and PSU Both motherboards work perfectly with my tester g-card New PC Parts I k Gigabyte GA-Z X-UD P-B Corsair TX w V The new one fails to boot at all even with various different power cables removed I cannot RMA card as it is No works fan kinda speed boot, card? mobo faulty on other - - full 5870 second-hand BY using my 5870 No boot, fan full speed - kinda works on other mobo - faulty card? trick on the old motherboard it works perfectly so the card actually works It s just having big issues accepting power to 5870 No boot, fan full speed - kinda works on other mobo - faulty card? boot Would flashing the g-card bios help This quote is from an article about flashing the g-card bios It seems to sum up my issue the video BIOS initializes the card As soon as it receives power from the motherboard the BIOS activates the card and identifies itself to the motherboard BIOS In short the video BIOS starts and identifies the card and provides its initial crop of settings However if I can get any advice on other things to try out then I will happily do them The PSU s are not at fault as There is the same issue with a new Antec PSU and my brand new Corsair TC w which is supposed to be one of the dogs bollox of PSU s Thanks in advance for your reply Ivan G-S nbsp

A:5870 No boot, fan full speed - kinda works on other mobo - faulty card?

Welcome to the world of custom building lol, my computer has similar problems that if i have had it turned off for more than 5 minutes it will not boot and keeps bluescreen until i do a clean boot with a power drain, my solution to that is do just set the bios on the MB to use a 1W standby and leave it in sleep mode always (reboot it every so often)
 

http://www.techspot.com/community/topics/5870-no-boot-fan-full-speed-kinda-works-on-other-mobo-faulty-card.173944/
Relevancy 24.08%
Relevancy 23.65%

Greets - Tons of reviews out there show strengths and weaknesses of USB 3.0 Flash Drives but they all seem to have awful 4K write speeds, and there is no way to compare 4K write speeds across all flash drives. Anyone out there in forum-land know of a 64GB USB 3.0 Flash Drive (not SSD) which has the comparative best 4K write speeds? THANKS!
 

http://www.techspot.com/community/topics/anyone-know-of-a-decent-4k-write-speed-on-a-64gb-usb-3-thumb-drive.171120/
Relevancy 23.65%

Hello, I have a multiple user home network that has been experiencing some unusual internet behavior. I scanned both the desktop and laptop with HJT and I was wondering if anyone here could give me a hand sorting it out. Cheers.
 

A:Internet is disconnecting/intermittent problems with speed

Alright so I feel like a huge **** for not searching the forum first. I realize that HJT is not used to determine network issues so if there are any processes on this list that pop out at you as malicious software please let me know, but I will deal with the connection problems in another way.
 

http://www.techspot.com/community/topics/internet-is-disconnecting-intermittent-problems-with-speed.170474/
Relevancy 28.38%

Hello My name is Dylan and i just finished building my dream desktop It has an Asus P P PRO motherboard gb Western Digital Caviar Green Hard drive Intel i ghz socket type LGA quad core processor with threads w power supply and an AMD Visiontek HD graphics card So after another successful day of computing and gaming yesterday i wake up this morning to find it running very slowly And I night slowly over sitting Computer after runs mean it is slow Even the bios menu is very slow Once it finally boots into windows which takes about minutes things are still very slow response time is good i mean when i run a program the window for the program opens right up but Computer runs slowly after sitting over night takes for ever to load to a usable state And for some reason my mouse doesn t work Please help as i have not even been using this computer for a week I have been monitoring cpu temps and they never seem to go over degrees Celsius even when gaming so i pretty much know its not overheated But what about ram Maybe it overheated If you need any more specs i will be happy to give them nbsp

A:Computer runs slowly after sitting over night

There is a good possibility you are infected. Go to our Virus & Malware Removal forum, read and follow exactly as given the directions in the Updated 7 Steps sticky.

Then on that forum post your results. Make sure you paste the information as directed.
 

http://www.techspot.com/community/topics/computer-runs-slowly-after-sitting-over-night.169650/
Relevancy 24.08%

So this is a good one I have a user that has a mb down mb up connection that they are paying for in their home They are hooked up to a Asus RT-N U router They have a laptop hooked up Odd problem speed Internet by ethernet and when I performed tests on several different speed tests I did not get Odd Internet speed problem past mb down mb up When I checked the users providers speed test Charter Communications the test came back almost perfect matching the speed they are paying for with them So then I went Odd Internet speed problem ahead and bypassed the router and did a direct connection and all of the sites reflected the correct speed I m thinking the router is probably the problem but before I recommend that I can t help but Odd Internet speed problem wonder why the customers ISP shows the speed as right behind the router while the others do not I checked the routers settings and I did not see anything that would bottleneck the speed Any ideas opinions or suggestions nbsp

http://www.techspot.com/community/topics/odd-internet-speed-problem.167870/
Relevancy 34.4%

So I ve always kind of had this issue not something really new However after testing my wife s PC to see if it were a router issue or something I realized I m in a bad spot My speed test had my D L at like Mbps and my U L at like Both spiked during the test around Comparing to my wife s PC when I did the test was Mbps D L and Mbps U L Her PC has the hard line into it while mine is directly connected to the router The provider goes through her PC etc Is there some tests I could do to find out higher than Upload download speed speed... my if it s Upload speed higher than my download speed... My PC My Router or Just some settings Thank you Also I saw someone ask on another one of these issues for the netstat -n so here is mine Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved Active Connections Proto Local Address Foreign Address State TCP ESTABLISHED TCP ESTABLISHED TCP ESTABLISHED TCP ESTABLISHED TCP ESTABLISHED TCP ESTABLISHED TCP CLOSE WAIT TCP CLOSE WAIT TCP CLOSE WAIT TCP ESTABLISHED nbsp

A:Upload speed higher than my download speed...

Interesting thing, I refreshed my net and restarted my PC, and it was peaking at 322.5KBps, but now it's back down to like 10-20KBps (at least when d/l from steam).
 

http://www.techspot.com/community/topics/upload-speed-higher-than-my-download-speed.167450/
Relevancy 24.08%

Hey guys just a quick question about internet speed I recently changed from Mb internet speed as we were paying around a month with Virgin Media M TV M Phone and M Broadband which is Mb- Mb but it was basic Mb most of the times and upgraded to Mb for cheaper Now my question is will I see any difference speed 30Mb Internet worth -- it? in latency when gaming I currently have - MS when playing on EU servers and around - MS when playing on the US servers When SWTOR Star Wars the Old Republic I will be joining a US guild crew clan which Internet speed -- 30Mb worth it? will be playing on the US servers so I was hoping that the Mb package will give me around stable - MS when playing on the US servers I would think there wouldn t be huge difference since anything over XX Mbps download speed would be waste guess the only benefit I will probably have is increase in the upload speed which was Mb on the Mb connection and now Mb on the new Mb connection Will be getting the Superhub this Wednesday still stuck on Mb Hope you can help thanks in advance nbsp

A:Internet speed -- 30Mb worth it?

Bump sauce, anyone? Will there be any difference in ping from 10Mb to 30Mb?

___

Edit

Just got my 30Mb setup and I tell you that there isn't much difference in the ping when gaming, maybe roughly 10ms at max due to the upload speed being higher. But downloading videos, music etc... is 3x as fast which is great! So far SuperHub is doing ok, no problems aroused but within 2hours already downloaded 1GB 244MB of Data (but 2 pcs running so hence why I guess).
 

http://www.techspot.com/community/topics/internet-speed-30mb-worth-it.166814/
Relevancy 23.65%

Hi guys I have recently days ago changed ISPs and have been getting good speeds as opposed to what I was getting with my old ISP I have Netmeter on my PC which tracks bandwidth usage and also shows in real time the speed of downloads However when downloading something such as a torrent I am getting about mbps reported from the torrent programme but mbps reported by netmeter I am not using the internet for anything else apart from downloading the torrent I am wondering why there is a mbps difference between the actual download speed and what netmeter is telling me I am getting Could that extra mbps be being used elsewhere I m not sure what it could be steam actual download speed reported between and Discrepancy is closed itunes is closed web browser is closed no other things are being downloaded I would expect that if netmeter says - kbps that my torrent programme Discrepancy between actual and reported download speed would also be reporting the same number but it is staying at kbps Any ideas or is netmeter just over estimating the D L speed nbsp

A:Discrepancy between actual and reported download speed

Just a quick input:
Doesn't torrent programs also upload data? Perhaps that is where your missing 1mbps is going.

Edit:
I'm not familiar with Netmeter, but I know that some (cheap) programs actually treats the upload and download as the same thing, and instead calls this "Network speed" or "Network flow".
 

http://www.techspot.com/community/topics/discrepancy-between-actual-and-reported-download-speed.166404/
Relevancy 24.51%

I m asking this because me and a friend of mine both bought HP :( speed Can't gigabit get ProLiant Microservers at the same time We both have the same setup which is PC and Server both connected to a Gigabit switch He can receive speeds of over MB s when transferring from PC to Server using default windows file copying I can get no higher than MB second using Windows file copy or by using TeraCopy I have tried copying from different sources ie Different hard drives in my PC I have a Seagate GB rpm and from a laptop which has a gigabit port too but still no faster speeds We both have the same hard drives within our Can't get gigabit speed :( servers I thought it could have been a driver issue on the server however we checked side by side the driver and the advanced configuration of the NIC however still no joy I have attached HIS screenshots of the speeds he receives We also did a netperf test his throughput is while mines is - Also tried changing speed amp duplex settings to mb full auto mb full etc etc NO JOY According to netperf if the throughput is not what you expect for your type of connection then it s a NIC issue or driver issue or NIC settings issue But i ve tried now from different sources yet still no joy and i ve also tried different cables and also direct connection via crossover PULLING MY HAIR OUT OVER THIS Screenshot of my Friends performance nbsp

A:Can't get gigabit speed :(

It could just be that your non server side hard drives are not fast enough. 90 megs a second is pretty fast for modern mechanical hard drives. Your laptop drive is probably pretty slow because they are designed for low power consumption rather than speed, and that 320GB drive is old - I would be surprised to find that it could sustain a read faster than 60 megs a sec.
 

http://www.techspot.com/community/topics/cant-get-gigabit-speed.165192/
Relevancy 24.94%

Yesterday I purchased parts to build a new htpc The board that I bought is the MSI E IA-E which on the box boasts a single PCIe x slot Not until I purchased and opened the box and read the manual did I find out that the x slot is limited to run at x So I m a little angry as I feel this was false advertising I am actually not using this slot for anything right now but might have in the future I m not looking for feedback such as quot it s no big deal you ll run fine at x quot or anything like that what I do want to know is - Is this normal practice for a manufacturer - What is the purpose of calling it x if it only runs at x My assumption is that it just means it can take an x card but only run it at x speed Shouldn t that have been specified on the box - If it can handle an x card but is limited only at x16" E350IA-E45 box, "PCI the claims on runs it MSI but x4! Legit? to x is that a hardware or software limit leading up to my next question - Can this limit be changed either by the end-user me or by driver updates Maybe they intend to unlock more speed later on Thanks in advance Please go easy on me I haven t worked with any modern hardware in MSI E350IA-E45 claims "PCI x16" on the box, but it only runs at x4! Legit? the last years or so nbsp

A:MSI E350IA-E45 claims "PCI x16" on the box, but it only runs at x4! Legit?

I suppose the purpose of saying it is a x16 slot is to differentiate the size of the slot, x4 and x1 PCI-e slots are smaller. The lanes being x4, I'm not sure about, maybe due to the size and the expected use of the motherboard it was thought unnecessary, or maybe just to save cost.
 

http://www.techspot.com/community/topics/msi-e350ia-e45-claims-pci-x16-on-the-box-but-it-only-runs-at-x4-legit.165193/
Relevancy 23.65%

Hello guys this is my first post in this forum.

I work in IT support, and I came across a problem with someone I work with.

Guy called Tony, had a USB stick in one of his front USB ports on his computer, he accidently kicked it and broke some of the USB off in the port.

He has 2 ports on the front, and now when he plugs something into the one that isnt broken, a cooling fan at the top of the computer goes crazy, and it cant be stopped until the computer is shut down, and the USB doesnt register on the computer.

Is this a problem with wires? Or is it just a problem where the ports at the front need replaing all together?

Thanks!
 

A:USB ports makes cooling fan run full speed?

Powah said:





Is this a problem with wires? Or is it just a problem where the ports at the front need replaing all together?Click to expand...

Hard to say at this state.

By "a piece broken off", do you mean Mr. Tony broke the flashstick so that the USB-male is still plugged in, but the drive itself has been detached? Have you removed the piece which is still inside? (It helps ) - also, which OS is the computer running? This is sort of important, as different OS's works (a little) differently regarding the USB-ports.

Currently, it looks like you simply need to remove that piece stuck inside. Although if that doesn't fix the problem (or if there is no piece stuck inside), then probably a connection or two inside the port broke when the flashstick was kicked - resulting in a need for changing the entire port .
 

http://www.techspot.com/community/topics/usb-ports-makes-cooling-fan-run-full-speed.164997/
Relevancy 24.08%

Hi,

My download speed was like 1.53 Mbps and my upload speed was 0.01mbps... i can't upload any file, what should i do? Thanks
 

A:Can I increase upload speed?

Can you please give a little more information?
 

http://www.techspot.com/community/topics/can-i-increase-upload-speed.157452/
Relevancy 23.65%

i know that multiple laptops compete with the same signal from a single router. but will a 4 gig be able to have an advantage over a 2 gig laptop thanks pls do not laugh at my question! hu hu hu
 

A:Memory affects network speed or router priority?

The connection speed will purely be down to the network card/wireless speed and any settings in the router (for example setting the 2gig laptop to use a set IP address and restricting its connection). A faster processor will have pretty much no affect on your machines connection speed to the router as far as I am aware.
 

http://www.techspot.com/community/topics/memory-affects-network-speed-or-router-priority.163210/
Relevancy 24.08%

Hi all Just bought my new HIS and received it today However i have decovered a small problem with it If i turn the computer off and leave it off for awhile then turn it back on I get nothing on the screen There is a red light on the video card just underneath the cooler that lights up red and the fan spins at However if i turn the computer off then back on again the card works without a problem and runs games perfectly light red on on speed power HIS fan and - 100% 5770 Why would the card be doing this Is their an issue with these cards that i dont know about I tried searching google and got nothing My specs Gigabyte GA- GPA-UD H motherboard Phenom II x HIS 5770 - red light and 100% fan speed on power on CPU Corsair HX W Power Supply Kingston HyperX gb ddr ram Any help would be very greatly appreciated Thanks Nathan Edit There are no artefacts no discolouration no strange things on the screen or anything After the second power up the card works exactly the way it should nbsp

A:HIS 5770 - red light and 100% fan speed on power on

Ok guys. I think i may have fixed the problem. All i did was push power connections on the card and power supply in a little harder, wiggled them around and wiggled the card around in the slot.

I have done multiple shutdowns since i did that and everytime i power te system up, it comes on first time. I will post again if the problem reappears though.

In the meantime though, i have one more question. In about 2 weeks, i plan to get another 5770 and run them in crossfire. My question is, do i have to reinstall the video card drivers when i install the second card? (i have the latest 11.2 now), Or can i just pop the second card in, connect the crossfire bridge, enable crossfire in the CCC and itll work fine?

Sorry for the dumb question, its just this is my first time using a multi GPU setup.

Thanks.
 

http://www.techspot.com/community/topics/his-5770-red-light-and-100-fan-speed-on-power-on.163058/
Relevancy 24.08%

I have CPU Intel Core i - Quad core GHz Mobo speed CPU & PC slow Poor utilization Gigabyte GA-P -UD P P pin DDR RAM Patriot Signature GB Poor CPU utilization & slow PC speed Ghannel Kit DDR for Intel pin Intel p AM The set-up is about year old amp my TB HD rarely shows defrag at worse than most Poor CPU utilization & slow PC speed partitions are On the whole I consider my computing is slow Slow to load slow to wake up slow to launch programs amp slow to shut down What infuriates me is that only very rarely do I see CPU utilisation higher than amp then it s usually around doing flat out file copying Also very frequently below I have a couple of widgets providing this info Core Temp reports RAM usage CPU Usage shows the utilisation average amp with each of quot cores quot As I write now I observe the RAM usage at between amp while the CPU usage is only Simultaneously TaskManager shows CPU usage for all running processes Can anyone offer some explanation I d be happy to run any recommended benchmark tests or what I might do to sort this out I can remember when my first Pentium II processor seemed just as fast although that rapidly lost speed nbsp

A:Poor CPU utilization & slow PC speed

You shouldn't expect more than a small percentage of CPU usage, so that is normal.
Same with RAM, except that 2GB of RAM is pretty normal too.
If you really think that your computer has a problem, it would most likely be virus related.
 

http://www.techspot.com/community/topics/poor-cpu-utilization-slow-pc-speed.162715/
Relevancy 24.08%

I'm having problems running my 4gb kit (2 Rams of 2gb) Hyperx ddr2 1066 to advertised speed and timings 5-5-5-15.

This is my Hyperx version KHX8500D2K2/4G.

Before I was able to run it with no problems but now my PC restart itself 3 times and after that it automatically change it to 800 speed with standard timings.

The only way my PC let's me run it on 1066speed and 5-5-5-15 timings all day with no problems is if I let it first run to Window with the 800 speed an then restart it and change the speed and timing in the Bios.

But if I let the PC turned off for 1 hour or more it starts making the same restarting problem as before.
 

A:Can't run HyperX 1066 RAM at advertised speed

Hello. Make sure that you have the latest version of your BIOS. Also try setting your BIOS settings to default. I'm not sure that it will help, but you should try.
 

http://www.techspot.com/community/topics/cant-run-hyperx-1066-ram-at-advertised-speed.162178/
Relevancy 23.65%

Can anyone tell me what this means I am thinking of buying a new pc and am not confident enough to build it myself. Have been looking in the usual places that people who build there own rigs probably disapprove of, when am looking at a certain pc from dell it says this

The memory speed of 4 DIMMS configuration will be limited at 1066MHz with Athlon II X4 630 and Phenom II X4 820 processors. ...

If the memory works at 1300 Mhz and the Processor only supports 1066 Mhz what does that mean ?
 

A:AMD processors limited to 1066MHz memory speed?

AMD CPU's have the memory controller built into them. Faster memory will just have the speed of it set to what the memory controller can support.

So if the memory works at 1300Mhz, but the controller only supports 1066Mhz, then the 1300Mhz memory will just slow down to 1066Mhz.

But Dell only says that the speed of the memory will be limited on those CPU's only if all 4 ram slots are filled with memory. Unless you will be upgrading the memory in the system when you get it, you dont need to worry about it.

Hope this helps.
 

http://www.techspot.com/community/topics/amd-processors-limited-to-1066mhz-memory-speed.161784/
Relevancy 29.67%

Hi all I recently bought that motherboard http www asus com product aspx P ID eCWbkolMf DOW IV and in the store where I bought it they installed it in my pc and they installed the video card in the White PCIe Slot and after that with the pc in my house I found that in the user manual of the x8 runs x16 PCI-E at instead of mobo ASUS VGA SWITCH CARD The ASUS VGA switch card PCI-E runs at x8 instead of x16 allows the Blue PCIe x slot to run at full x mode when only one graphics card is installed to the slot Installing one graphics card When you install only one graphics card ensure to install the VGA switch card to the PCIe x slot first and the graphics card on the Blue PCIe x slot Installing two graphics cards When you install two graphics cards remove the VGA switch card from the PCIe x slot The two x PCIe slots will boh run at x mode According to another page of the manual the PCIe x is the White slot So I installed that as it says I removed the video card from the white slot and put it in the blue slot and put the vga switch card in the blue slot By the way the VGA switch card is like that Well after that I turned on the pc and I saw on CPU-Z and GPU-Z that the PCIe was still running at x S so I searched that on google and I found that I had to do a clear CMOS But some hours later I turned on the pc and noticed that for some reason the PCIe was running at x and the next day the PCIe was still running at x so I thought that it was not necessary to do the clear CMOS xD But now about a week later I have seen that the pcie is running at x again S S Why How can I put it to run in x mode forever Do you think clearing CMOS will work But I am unable to clear CMOS because the jumper that does that is hidden under some cables and I cant use that how can I clear cmos without using the jumper is it possible to do it by removing the battery What do you think I hope yo can help me By the way Sorry for my bad english my level is VERY low and some concepts are hard to explain with a small vocabulary I hope you can understand the message Thank you nbsp

A:PCI-E runs at x8 instead of x16

Wrong slot

I checked the ASUS manual for your MoBo.

The white (top) slot is the slave (8x). The blue (bottom) slot is 16x.

Damn configuration is backwards.

Just swap slots. Should fix it.

When you use two cards, both run at 8x. Remove the card in the white slot to get 16x.
 

http://www.techspot.com/community/topics/pci-e-runs-at-x8-instead-of-x16.161448/
Relevancy 52.89%

My daughter has complained runs Mobile speed at Athlon 40% that her machine feels sluggish and slower than usual for a while and I have been less than attentive putting it down to her impatience Mobile Athlon runs at 40% speed The board is an A N X-E Deluxe at Reev with a Mobile Athlon XP-M processor about which the writeup at Wikipedia is extremely complimentary Athlon XP-Ms were popular with desktop overclockers as well as underclockers The lower voltage requirement and higher heat rating resulted in CPUs that were basically quot cherry picked quot from the manufacturing line Being the best of the cores off the line the CPUs typically were more reliably overclocked than their desktop- headed counterparts Also the fact that they weren t locked to a single multiplier was a significant simplification for the overclocking process Some Barton core Athlon XP-Ms have been successfully overclocked to as high as GHz As per AsusProbe her processor is only running at MHz That s of what s possible and less than half the it should be Confirmed this with CPU-ID so it really is pitiful The BIOS settings were on Automatic and the grayed out values identified by square paren set look like the correct numbers X is spot on for a processor Not knowing why the actual was only X I tried to force a higher rate by modified the settings as shown behind the slash New effect zilch Code Advanced Chipset Features CPU External Freq MHz MHz CPU Frequency Multiple Setting Auto Menu CPU Frequency Multiple X X System Performance Optimal Aggressive CPU Interface Optimal Memory Frequency SPD Resulting Frequency MHz Memory Timings Optimal SDRAM Active Precharge Delay SDRAM RAS to CAS Delay SDRAM RAS Precharge Delay SDRAM CAS Latency T FSB Spread Spectrum AGP Spread Spectrum Disabled CPU Vcore Setting Auto Manual CPU Vcore V V Graphics Aperture Size MB AGP Frequency Auto System BIOS Cacheable Disabled That it is running slower is not her imagination When the CMOS was lost due to a weak battery the previous settings disappeared They must have been set to maximize performance from the Mobile chip If anyone can point out what it takes to make the Mobile chip run faster I would certainly appreciate it Note When external frequency is forced to to match the memory the chip accepts it and runs at Mhz nbsp

A:Mobile Athlon runs at 40% speed

The Barton 2400+ is supposed to be clocked at 1800MHz. Check whether AMD Cool And Quiet is enabled in the BIOS. If it is, disable it. The CPU should then definitely function at 1800MHz at all times. Cool And Quiet usually lowers the speed when the system is idle to conserve power.

The Bus Speed should be 266MHz with the multiplier at 13.5, I think.
 

http://www.techspot.com/community/topics/mobile-athlon-runs-at-40-speed.161297/
Relevancy 24.51%

Just got an EVGA GTX570 Superclocked GFX card. Card works like a dream! One thing though. EVGA Precision will now only let me take the fan speed up to 85%. Can anyone tell me why or how to fix the issue? I have completly uninstalled the drivers and then reinstalled them but i can still only acheve 85% fan speed.
 

http://www.techspot.com/community/topics/fan-speed-issue.161308/
Relevancy 24.51%

hello my internet speed seems to low according to speedtest.net i tried everything disk defrag,registry defrag,cleaned registry using cleanmypc registry cleaner i have my pc with avg internet security 2011 premium what to do now plz help!

Speedtest

http://img691.imageshack.us/img691/5439/speedtestr.png

Pingtest

http://img156.imageshack.us/img156/7467/pingtestu.png

Hijackthis LOG

http://www.mediafire.com/?5thqe92e1vi7g87
 

A:Internet speed to low

Can you tell me the download and upload speeds? I am at school and the sites you have the images on are blocked.
 

http://www.techspot.com/community/topics/internet-speed-to-low.160850/
Relevancy 20.64%

Hi!

So I would need help setting up my LAN and limiting the network speed (max dl/ul).

Are there some kind of programs or something for that? -I have tried NetLimiter but with it I can only limit the "bridging" computers upload and download and not the different network cards speeds.

The limitations has to be made on this computer (aka wannaB server) and not on the separate computers that are connected to it.

Network cards:
Oliv - needs to be limited to max download ~150kB/s and upload 25kB/s (this one is connected even if it says it's not)
Switch - no need to limit or anything
ADSL Modem - as it says, this is where the interweb comes from
 

A:How could I limit network speed between different "cards"?

What OS the Pro or Home? If you got the Pro you can go into Group Policy and make some bandwidth restrictions. By default it's 20%. You can raise that up higher. Under QoS.
 

http://www.techspot.com/community/topics/how-could-i-limit-network-speed-between-different-cards.159517/
Relevancy 23.65%

Hello

I have been looking at a PC which has a low download speed, 1180Kbps, when access the Internet via a 3COM wireless access point. This access point has the number 7000-000-732 but I cannot see such a model on the Net.. The nearest similar one seems to be the 3ComŽ Wireless 7760 11a/b/g PoE Access Point.

Any idea why this download is so slow? The main office PCs download much quicker.

Cheers

Geoff
 

A:Slow download speed using access point?

Hello

My mistake! How many times do I have to tell myself not to act on assumptions!!

I tested the download speed in the office today and found it was only 1800Kbps so the 1200Kbps at the PC with the wireless connection (67%) is not too bad I guess. I had assumed that the office speed would be higher.

It would seem that the ISP has allowed their customer to stay on a low Internet access speed..

Thanks

Geoff
 

http://www.techspot.com/community/topics/slow-download-speed-using-access-point.159275/
Relevancy 24.51%

Where is ADSL speed based at?

Is it at the 'account' level [user/pass].. at the line level [specific phone line] or the modem leve [specific settings in the modem] ??
 

A:ADSL speed

Haha good question.The 'speed' you buy from your ISP or cable company is the bandwidth from the local exchange/depot to your address.
It`s the width of that 'pipe' you`re paying for.Measured in Megabits per second (Mbit/s).

The speed you measure when using one of those internet speed tests (speedtest.net) is the actual speed you get from a server on the wider internet to your computer.
That will be affected by distance and general web conditions between you and there.
 

http://www.techspot.com/community/topics/adsl-speed.158956/
Relevancy 24.08%

KFA2 GTX 480 LTD OC Edition or a Geforce 580?

I know the 580's a faster card but it's more expensive and doesn't run as cool as the former. I'm also aware that the 580 is using new vapour-chamber tech etc. which makes it run cooler than previous Nvidia cards but I've got an issue with heat. Believe me, my case is cool (in both uses of the term) and tidy but I've always had a problem with graphics card temps and now there's a card (the 480 above) which has brought the temperatures right down to nowhere near boiling point, without the use of water cooling.

That said, because of the use of the fans on the 480, the air that is blown away from the card would circulate the inside of the case... then again my case should dispel it. Am I ranting?

What should I do?

Please help!
 

A:A simple question around heat vs speed?

"I know the 580's a faster card but it's more expensive and doesn't run as cool as the former. I'm also aware that the 580 is using new vapour-chamber tech etc. which makes it run cooler than previous Nvidia cards"

First you say that the GTX 580 doesn't run as cool as an GTX 480, then you say it does. I dont really get why your even posting this. Are you asking if you should buy a GTX 480 or 580 and weather or not you should water cool the video card you do buy?
 

http://www.techspot.com/community/topics/a-simple-question-around-heat-vs-speed.158003/
Relevancy 24.08%

Hey. I just got some new cat6A STP cables, and tested out my connection speed by directly connecting to my computer. I got somewhere around 100Mbs (I live at a university, so the internet is fast). When I connect my computer through my 10 year old linksys router, it maxes out right at 10Mbs. I am assuming that it is too old to support 100Mbs speeds, so I was wondering if I get a new router or switch, would one of those be able to support the 100Mbs, and which would be faster?

Edit: I guess I should add that I have tried looking for the answer to this question but most answers that I saw were for 5Mbs connections, thus people said it did not matter. But I could not find anything about higher speeds.
 

A:Router vs. switch speed

If your connection requires a router, get a new router. Otherwise a switch or direct connection would be fine.
 

http://www.techspot.com/community/topics/router-vs-switch-speed.158076/
Relevancy 25.37%

My external Seagate drive is apparently "dirty" and windows automatically checks it every time i boot up with it attached to the usb port. It is actually pretty annoying. The only way around it that I found is actually unplugging it before I boot up and plugging it back in after windows starts.

Every time the check says there are no issues. The drive works fine and I am able to use the drive as if nothing is wrong.

Does anyone know whow to get rid of the check during Windows startup? How can I make my drive "clean" again? Thanks

EDIT: I have Windows XP sp3 btw
 

A:External hard drive is "dirty" and windows runs a check every time computer boots up

You may need to run a manual chkdsk /f to clear it. Try this
> Unplug the drive then boot up then plug it back in. Determine its drive letter
> Start->Run, enter cmd to open a command prompt
> Enter chkdsk x: /f (except use the correct drive letter, not x)

/f option may take loong time complete (especially if large hard drive.. i.e hours) but when it's done i believe it should clear the dirty bit for you
 

http://www.techspot.com/community/topics/external-hard-drive-is-dirty-and-windows-runs-a-check-every-time-computer-boots-up.156426/
Relevancy 23.22%

I just bought a new modem to replace the one I am renting from Comcast (Motorola SB6120: http://www.newegg.com/Product/Product.aspx?Item=N82E16825122009). I have been using an Encore (EHH-WI-G) 802.11g 54Mbps router.

I got everything hooked up last night and I noticed that when I was hooked up directly to the modem (ethernet), my internet was super fast. When I hooked up the wireless router and accessed the internet through it, my speed was noticeably slower. I used speedtest.net to see what my speeds were like:

Wired to modem: download 50+ Mbps (I don't know how in the world it read this high...I'm not even paying for these speeds from Comcast)

Wireless through router: download only around 5 Mbps

Can someone explain this to me? Is there a setting on my router that is restricting the speed in some way?
 

A:Internet speed - via wireless router (slow) vs. via modem (fast)

Have you tried downloading files in both wireless & wired what speed did u get in both modes.
 

http://www.techspot.com/community/topics/internet-speed-via-wireless-router-slow-vs-via-modem-fast.155846/
Relevancy 24.08%

I recently bought an EVERCOOL SB-F to help pull air out of my case preemptively away from a RAID card BBU to keep battery temperatures down While this thing sucks a lot of air it s a little louder than I would want it to be so I speed Modifying PCI fan slot would like to essentially lower the voltage to decrease the fan speed and ultimately lower the sound it produces It uses two wires red and black I think v and ground connected to a molex connector I have a Silverstone FP fan controller that I have from an old build and thought about using that but of course the connections as it stands are imcompatible so I have essentially three options Modifying PCI slot fan speed Buy a molex to pin adapter so I can connect it to the controller assuming that works Buy just the pin female connector and find pins and mod the power connector so I can connect it to the controller assuming that works Salvage one of the Rheostats that I am not using from the controller and connect just that directly to the non-ground wire also assuming that works Are any all of these possible Which would you personally do and why I am open to doing either three but am unsure which is the potentially better option nbsp

A:Modifying PCI slot fan speed

I would buy the adapter because it is the simplest. If it doesn't work, you can put it back to its original configuration quickly and easily. It will still be loud but functional. The other two methods are more destructive and require more work to restore. Also, if the first method doesn't work, you can still try the other two if you want.
 

http://www.techspot.com/community/topics/modifying-pci-slot-fan-speed.151478/
Relevancy 24.08%

I have a Inspiron e1505 with a Intel Duo Processor T2400 (2M Cache, 1.83 GHz, 667 MHz FSB). My current memory is 2 x 512mb DDR2 533 (PC2 4200).

I plan to upgrade my memory to 2 x 1gb. I was going to get DDR2 667 (PC2 5300) to match with the 667 MHz FSB. I do have the option of getting DDR2 800, but I think this would be pointless since the FSB is only 667.

Is this the right way of going about it? I'm no expert, but just from searching around the web this is the basic idea I gathered.

Thanks for the help
 

A:Memory upgrade, matching w/ FSB speed?

I think this would be pointless since the FSB is only 667.Click to expand...

Why?
IMO DDR2 800 is fine if its only a couple dollars more expensive.
 

http://www.techspot.com/community/topics/memory-upgrade-matching-w-fsb-speed.154253/
Relevancy 28.38%

So I recently upgraded my pc so I could play games better and for over all use. But for some reason When I play Overlord 2 I get the same FPS as I did with the old set up and it makes no sense. I haven't Tried any other games but will. about 7-12 fps
My current Set up
Cpu:AMD Athlon II X2 250 3.0Ghz Dual Core
Main Board: Foxconn M61PMP-K
Memory: DDR3 Wintec AmpX 2x2g
Graphics: Nvidia GeForce 6800
PWS: DYNAPOWER USA ADW-500 500W ATX12V Power Supply
OS: Windows 7

also I have set my system to run for best performance like I did with my old set up and I still get around the same FPS.
 

A:Recently upgraded computer but a game still runs on low FPS

What was your previous graphics card?

That is most likely holding back your FPS. Also, how much RAM (memory) are you using?
 

http://www.techspot.com/community/topics/recently-upgraded-computer-but-a-game-still-runs-on-low-fps.152523/
Relevancy 29.24%

Hi, I have a Gateway AJ2 that is acting up. If I have the battery installed, the computer runs on the battery, regardless if the AC adapter is plugged in or not. If the battery isn't installed, the computer runs on AC with no problems.

The battery does not charge. The computer is a little over a year old. I don't exactly recall when the problem started, but it might have been after a Windows Vista update or a bios update.

Thanks in advance for any assistance.
 

A:Laptop runs on only battery or AC, not both

The battery is probably bad. They are consumables, just like paper is to a printer... Regardless of its age, it needs to be replaced if only to verify for a bad battery or not
 

http://www.techspot.com/community/topics/laptop-runs-on-only-battery-or-ac-not-both.146047/
Relevancy 24.94%

A device manager wasn't mentioned from the manufacturer. The manufacturer is PNY. Anyone know why it might cause the computer to run on virtual memory? There is a warning box that pulls up reading "out of memory at line:1521". I don't know what I need to do.
 

http://www.techspot.com/community/topics/got-a-new-memory-card-now-computer-runs-on-virtual-memory.150828/
Relevancy 28.38%

Are there any PDAs or pocket pc's that are able to run the full version of excel? i would like to deploy an excel file that is written with VBA to a mobile device to collect data.

Thanks.
 

http://www.techspot.com/community/topics/mobile-device-that-runs-full-excel.150393/
Relevancy 24.08%

Hi

By visiting the Event viewer for my BSOD I noticed that two warnings are appearing in the list whose source is Kernel processor power and it is shown in the list every time that if i have booted my PC.
Had i not visited event viewer for BSOD purpose I would not have known these warnings!.

Warning 1:
The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.

Warning 2:
The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.

What is this? Does this show any prob with my processor or is it a normal thing to appear.

Hasnain.
 

A:Speed of processor limited

What type of CPU and which motherboard do you have? It's possible that the CPU is being slowed/throttled due to excessive heat.
 

http://www.techspot.com/community/topics/speed-of-processor-limited.150234/