Windows Support Forum

BSOD multiple times a day (ntoskrnl.exe)

Relevancy 100%
Preferred Solution: BSOD multiple times a day (ntoskrnl.exe)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 90.73%

My pc keeps bsod not sure the issue and am not good enough to figure the issue out I did get the following from the minidump the following is a skydrive to the dump Thanks https drv ms u s AuO d Dv rkGgTHSMzvQlwngoE e Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini day multiple BSOD (ntoskrnl.exe) times a Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path nbsp nbsp nbsp BSOD multiple times a day (ntoskrnl.exe) nbsp nbsp Use symfix to have the debugger choose a symbol path nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp After setting your BSOD multiple times a day (ntoskrnl.exe) symbol path use reload to refresh symbol locations Executable search path is nbsp Symbols can not be loaded because symbol path is not initialized nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp The Symbol Path can be set by nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the NT SYMBOL PATH environment variable nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the -y lt symbol path gt argument when starting the debugger nbsp using sympath and sympath nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win sp gdr - Machine Name Kernel base xfffff PsLoadedModuleList xfffff a e Debug session time Mon Jan UTC - System Uptime days Symbols can not be loaded because symbol path is not initialized nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp The Symbol Path can be set by nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the NT SYMBOL PATH environment variable nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the -y lt symbol path gt argument when starting the debugger nbsp using sympath and sympath nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Symbol Loading Error Summary Module name nbsp nbsp nbsp nbsp nbsp nbsp Error ntoskrnl nbsp nbsp nbsp nbsp nbsp nbsp nbsp The system cannot find the file specified You can troubleshoot most symbol related issues by turning on symbol loading diagnostics sym noisy and repeating the command that caused symbols to be loaded You should also verify that your symbol search path sympath is correct WARNING Unable to verify timestamp for hal dll ERROR Module load completed but symbols could not be loaded for hal dll nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Bugcheck Analysis nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Use analyze -v to get detailed debugging information BugCheck fffffa fa be Kernel symbols are WRO... Read more

https://social.technet.microsoft.com/Forums/en-US/77dc062c-9739-459c-9b59-666e3aec8449/bsod-multiple-times-a-day-ntoskrnlexe?forum=w7itprogeneral
Relevancy 90.73%

My pc keeps bsod not sure the issue and am not good enough to figure the issue out I did get the following from the minidump the following is a skydrive to the dump Thanks https drv multiple a times day (ntoskrnl.exe) BSOD ms u BSOD multiple times a day (ntoskrnl.exe) s AuO BSOD multiple times a day (ntoskrnl.exe) d Dv rkGgTHSMzvQlwngoE e Microsoft R Windows Debugger Version AMD Copyright c Microsoft Corporation All rights reserved Loading Dump File C Windows Minidump - - dmp Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path nbsp nbsp nbsp nbsp nbsp Use symfix to have the debugger choose a symbol path nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp After setting your symbol path use reload to refresh symbol locations Executable search path is nbsp Symbols can not be loaded because symbol path is not initialized nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp The Symbol Path can be set by nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the NT SYMBOL PATH environment variable nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the -y lt symbol path gt argument when starting the debugger nbsp using sympath and sympath nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win sp gdr - Machine Name Kernel base xfffff PsLoadedModuleList xfffff a e Debug session time Mon Jan UTC - System Uptime days Symbols can not be loaded because symbol path is not initialized nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp The Symbol Path can be set by nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the NT SYMBOL PATH environment variable nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp using the -y lt symbol path gt argument when starting the debugger nbsp using sympath and sympath nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list Symbol Loading Error Summary Module name nbsp nbsp nbsp nbsp nbsp nbsp Error ntoskrnl nbsp nbsp nbsp nbsp nbsp nbsp nbsp The system cannot find the file specified You can troubleshoot most symbol related issues by turning on symbol loading diagnostics sym noisy and repeating the command that caused symbols to be loaded You should also verify that your symbol search path sympath is correct WARNING Unable to verify timestamp for hal dll ERROR Module load completed but symbols could not be loaded for hal dll nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Bugcheck Analysis nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp Use analyze -v to get detailed debugging information BugCheck fffffa fa be Kernel symbols are WRO... Read more

https://social.technet.microsoft.com/Forums/en-US/c1a6f68d-7009-4461-bbe5-d438c3c7d9ab/bsod-multiple-times-a-day-ntoskrnlexe?forum=w7itprogeneral
Relevancy 89.87%

Hi guys,

Can someone please help me with this BSOD issues? Facing crashes every now and then while using PC for browsing and MS excel. Earlier it was caused by usbhub.sys but now it seems to be due to ntoskrnl.exe

Files attached.

Thanks a lot in advance.

Kind Regards,
Nirvana18

A:BSOD issues multiple times a day - ntoskrnl.exe

Code:
BugCheck FE, {8, 6, 5, fffffa8005b9a000}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------
It means BUGCODE_USB_DRIVER.

Give us some more insight.

Upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
Upload the list of all the third party drivers Using NirSoft DriverView :
Download and execute Driverview
View > Hide Microsoft Drivers
Edit > Select all
File > Save Selected Items
In the Save dialog, Set the path to desktop, Put "Driverview" in the name field, and save.
Zip the .txt file and upload it.

http://www.sevenforums.com/bsod-help-support/325529-bsod-issues-multiple-times-day-ntoskrnl-exe.html
Relevancy 76.54%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 69.66%

Hello, I'm getting a BSOD several times a day, it's a system that I purchased from CYBERPOWER, and it's been getting BSOD pretty frequently. I can't pinpoint any specific cause. It happens pretty randomly, some times when not much going on, and sometimes when I have a lot of things open.

A:BSOD, ntoskrnl.exe, happens a few times a day

Run a disk check of system drive
right click at your drive having windows and goto to tools tab and click check now in error checking,in check disk options makes sure to select both file system error and attempt recovery of bad sectors and hit start.It will ask you schedule a disk check at restart accept and restart the pc and wait for disk check to complete.

After that type cmd in start menu and run it as administrator,
type the following command and run to do a windows file integrate check and repair.

sfc /scannow

Post any error found.

http://www.sevenforums.com/bsod-help-support/302773-bsod-ntoskrnl-exe-happens-few-times-day.html
Relevancy 69.23%

I built a computer recently. Since day one I get BSODs but the drivers, and Bug/Checks listed are never the same.
I was thinking it couldn't be a single device or driver so I've:

Replaced the MOBO.
Repair Installed the OS.
Replaced the RAM.

It BSOD'd multiple times between each change.

The only things I've run are IE/FF and Ableton Live 9. Ableton is usually running during the BSOD but it was not the last time.

Thanks!

A:BSOD multiple times with multiple Drivers/Bug Check Stings

Welcome sfbybuss! Without looking at the file, since you say the lists is never the same and you built the computer, are you sure the PSU is up to speed? Latest MB BIOS?

http://www.eightforums.com/bsod-crashes-debugging/50361-bsod-multiple-times-multiple-drivers-bug-check-stings.html
Relevancy 69.23%

I am trying to get my wife's new computer up and running without any BSOD or program failures Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing I at Times Identified BSOD Multiple with Multiple Random Drivers presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton and I did that Another forum suggested that Virtual Multiple BSOD at Random Times with Multiple Drivers Identified Memory was the problem and I disabled and restored VM Still having multiple crashes and I am hoping that I can get real help here I do note that all the crashes have ntoskrnl exe in the driver stack although sometimes alone and sometimes with other drivers System Info Microsoft Windows Professional -bit Multiprocessor Free Service Pack Intel R Core TM Duo CPU E GHz MOBO ASUSTeK Computer INC P G T-M LX BIOS Date Ver GB Dual-Channel DDR MHz - - - -Corsair x GB MB NVIDIA GeForce GT ASUStek Computer Inc NVIDIA High Definition Audio Realtek High Definition Audio Monitors DELL FP Digital Dell FP Analog x Hz Hitachi HDS CLA ATA Device WDC WD EACS- ZJB ATA Device WDC WD AACS- M B ATA Device I am attaching the zip file with Windows NT BSOD jcgriff and PERFMON html included I am assuming that the DMP files are included therein Please advise if you need more information to help solve this problem Thank you for your help and wonderful support seen here New crash just minutes ago Uploading the dmp file for that in zip form

A:Multiple BSOD at Random Times with Multiple Drivers Identified

  
Quote: Originally Posted by a1newman


I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.

System Info
Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
MOBO ASUSTeK Computer INC. P5G41T-M LX3
BIOS Date: 01/13/11 16:27:43 Ver: 08.00.14
8.00 GB Dual-Channel DDR3 @ 533MHz (8-8-8-20)-Corsair 2x4GB
1024MB NVIDIA GeForce GT 440 (ASUStek Computer Inc)
NVIDIA High Definition Audio, Realtek High Definition Audio
2 Monitors: DELL 1908FP (Digital), Dell 1907FP(Analog) [email protected]
1) Hitachi HDS721050CLA362 ATA Device (2) WDC WD10EACS-00ZJB0 ATA Device (3) WDC WD5000AACS-61M6B2 ATA Device

I am attaching the zip file with Windows_NT6_BSOD_jcgriff2 and PERFMON.html included. I am assuming that the DMP files are included therein.

Please advise if you need more information to help solve this problem. Thank you for your help and wonderful support seen here.

New crash just minutes ago. Uploading the dmp file for that in zip form.



Nothing definite. Please run these two tests to verify your ram and find the mis-behaving driver.

These crashes were caused by memory corruption. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.


RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
... Read more

http://www.sevenforums.com/bsod-help-support/197106-multiple-bsod-random-times-multiple-drivers-identified.html
Relevancy 68.8%

I have Windows 7 Home Premium 64 bit which has blue screened three times today. I am attaching the dumps.

I ran chkdsk /R and Windows memory diagnostic and they found nothing. I also ran sfc /scannow, a full virus check using Microsoft Security Essentials, and made sure everything was installed with Windows Update. I appreciate any and all insight.

Thanks,
Chad

http://www.sevenforums.com/bsod-help-support/383871-bsod-ntoskrnl-exe-random-times.html
Relevancy 68.8%

Hi Background I got a brand new custom built desktop a week ago System started fine first time but then Windows had to be reset About days back there was another BSOD and one more on th Aug On th Aug I did a quot dskchk C f x quot and it showed no errors But on boot-up went straight to Reset Windows Did that and programs were removed by reset - Greenshot Mail and Calendar Since then more BSOD instances and all this while PC was under no stress mostly idle Now I am living in constant fear of this happening and haven't installed any programs for my work PS AI Audio production I don't know how to solve this so any and all inputs are highly appreciated NVIDIA drivers are up to date and so are most others as far as I can tell I had run Destroy Windows Spying on the nd or rd day after a raft of Windows Updates downloaded from Majorgeeks- so it should be legit Attached is the DM Log zip Thank you for reading this Do let me know if I need to provide any more info

http://www.tenforums.com/bsod-crashes-debugging/59031-bsod-4-times-24hrs-ntoskrnl-exe.html
Relevancy 68.8%

Hello,
A friend gave me her computer to fix because it has been BSODing at random times. I'm completely stumped after working on it, and i have yet to find a fix for the ntoskrnl.exe crash. I'm not a professional but the minidumps are blaming that driver so i just dont know. Any help is appreciated.

It's a custom build PC.

Motherboard: Asus M5A97
CPU: AMD Phenom(tm) II x4 945
Graphics Card: NVIDIA GeForce GT 440
Hard Drive: Western Digital WD7500AAKS-00RBA0 750 GB
RAM: 4GB

A:BSOD at random times...ntoskrnl.exe

Code:
BugCheck 124, {0, fffffa80046df8f8, 0, 0}

Probably caused by : AuthenticAMD

Code:
2: kd> !errrec fffffa80046df8f8
===============================================================================
Common Platform Error Record @ fffffa80046df8f8
-------------------------------------------------------------------------------
Record Id : 01ce7cf7256b33c5
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 7/9/2013 22:53:41 (UTC)
Flags : 0x00000002 PreviousError

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa80046df978
Section @ fffffa80046dfa50
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : Cache error
Operation : Generic
Flags : 0x00
Level : 1
CPU Version : 0x0000000000100f43
Processor ID : 0x0000000000000001

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa80046df9c0
Section @ fffffa80046dfb10
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000001
CPU Id : 43 0f 10 00 00 08 04 01 - 09 20 80 00 ff fb 8b 17
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa80046dfb10

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa80046dfa08
Section @ fffffa80046dfb90
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : DCACHEL1_EVICT_ERR (Proc 1 Bank 0)
Status : 0xb600400070000175
Address : 0x0000000000000b00
Misc. : 0x0000000000000000
The first parameter or argument has the value of 0x0, which is a Machine Check Exception, which means the CPU has detected a hardware problem and the address points to a processor error because the CPU has found one, so it could be a different form of hardware which is causing the issue. However, the error does point to the Level 1 Cache.

In such a situation, it is best to use these steps:Hardware - Stress Test With Prime95
Enable "Round off checking" before the test (see first post below tutorial).
Stop 0x124 - what it means and what to try
All the hardware seeming to be running stable and tests reporting no errors, could mean a bad motherboard.

http://www.sevenforums.com/bsod-help-support/297770-bsod-random-times-ntoskrnl-exe.html
Relevancy 68.8%

Computer has done this randomly ever since it was built. Sometimes it goes 1 day, sometimes it goes 2 weeks. It is on 24/7, and most of the crashes are while I am not working and it is just idling. Today it crashed while I was typing a post in Chrome.

Used WhoCrashed to find out that 5/6 crashes were ntoskrnl.exe, 1 was rt64win7.sys.
BugCheck names were: memory_management, bad_pool_caller, memory_management, system_service_exception, driver_irql_not_less_or_equal (rt64win7.sys), irql_not_less_or_equal

Have run memcheck and passed all tests with no errors.
After the rt64win7.sys/driver_irql_not_less_or_equal crash the BSOD said it was a tcpip.sys error so I updated my network drivers. Thought that fixed it as I had 15 days of uptime until today's crash.

Now I'm at a loss, hopefully someone can help.

A:BSOD 6 times, usually while Idle - ntoskrnl.exe

Hi Entropy42.

First of all, Update your ATI/AMD display driver to the latest WHQL. It is too old.

Code:
fffff880`07e05000 fffff880`07e5a000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: atikmpag.sys
Image name: atikmpag.sys
Timestamp: Wed Oct 26 06:51:58 2011 (4EA760B6)
CheckSum: 0005289A
ImageSize: 00055000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

The realtek network driver is not too old; but it is failing (on hardware?).

Code:
BugCheck D1, {8089, 2, 1, fffff88001a839c3}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : hardware ( Rt64win7+1ac84 )

Followup: MachineOwner
---------
Update it from Realtek ..... take the Win7 and WinServer 2008 R2 Auto Installation Program (the 4th one in the list).

Also, Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/311691-bsod-6-times-usually-while-idle-ntoskrnl-exe.html
Relevancy 68.8%

Laptop keeps crashing at what seems random intervals.

At first i thought it was the Wireless adapter but updating it did nothing.

So hopefully one of you fine people will be able to figure it out

Dumps attached.

Thanks,

A:BSOD at random times. ntoskrnl.exe

Hi CaptCrunnch.

Can you disable the webcam and let us know how the computer is running after that?

http://www.sevenforums.com/bsod-help-support/334906-bsod-random-times-ntoskrnl-exe.html
Relevancy 68.8%

I need some help with Blue Screens as I have tried everything that I can think of along with suggestions in other threads The computer seems to blue screen at random times without any warning or consistency I can be using it for hours with no problem or BSOD with seem to at times. ntoskrnl.exe Most be random minutes after startup it could blue screen Here is what I have tried so far Updated all drives including Intel Video Windows Used BSOD at random times. Most seem to be with ntoskrnl.exe chkdsk and sfc scannow Used UBCD to run diag on Hard drive with no errors reported Download Western Digital Utility to check HD ran both short and long test and no errors reported Ran memtest one time with passes no BSOD at random times. Most seem to be with ntoskrnl.exe errors ran a second time passes no errors Did a BSOD at random times. Most seem to be with ntoskrnl.exe system restore back to oldest point and continued to blue screen Used clonezilla to backup image then wiped drive and installed new OS using the restore media and blue screen still occurred Restored image back to drive and blue screen appeared Now I come to the forums for any suggestions I have attached the zip as requested in how to post on BSOD forums I hope someone can help me figure out what is happening Thank you in advance

A:BSOD at random times. Most seem to be with ntoskrnl.exe

That's a double fault.

Code:
BugCheck 7F, {8, 80050031, 6f8, fffff80002ed7b90}

Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )

Followup: MachineOwner
---------
As you are saying that you ran memtest86+ for long enough without any error report, let us check for any driver causing a stack overflow. Enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/352719-bsod-random-times-most-seem-ntoskrnl-exe.html
Relevancy 68.8%

Hey everyone For about a month and a half now I've been experiencing multiple BSODs every day as directed a Times BSOD 5-10 Day, 0x000000d1 ntoskrnl.exe? in the title up to - Most of the time when they happen it's when I'm pushing my CPU memory really hard I'm an audio engineer so I work with some processor and memory-heavy applications but it has also happened or times when I was only watching a video on netflix or youtube I don't remember making any major changes to my system around the time this started and I've already tried running tests on my memory and both HDDs with no errors coming up I've also been monitoring the temps of my CPU and GPUs to make BSOD 5-10 Times a Day, 0x000000d1 ntoskrnl.exe? sure that it isn't a heat issue which is isn't I've been running my same setup for over a year now and even before the BSOD 5-10 Times a Day, 0x000000d1 ntoskrnl.exe? BSODs started I was doing the same activities that I'm doing now including pushing my CPU memory hard at times I've tried to fix the problem on my own for the passed couple of weeks but I've gotten nowhere so I'm coming to the community for help I downloaded a tool called BlueScreenView which lists out the information about the BSODs that I've been having including the driver that seems to be the cause of the problem quot ntoskrnl exe quot shows up as the problem driver every time but sometimes it's paired with another different driver that seems to be almost random sometimes having to do with my antivirus BSOD 5-10 Times a Day, 0x000000d1 ntoskrnl.exe? sometimes with my audio interface or another windows driver etc But I could be completely wrong about quot ntoskrnl exe quot being the problem Thanks for taking your time to help me out This gets to be incredibly frustrating

A:BSOD 5-10 Times a Day, 0x000000d1 ntoskrnl.exe?

Hi Jarret525.

It seems that the cause of your BSOD's are DJM-900nexus Audio Driver

Code:
DJM-900nexus_AutoSetup DJM-900nexus_AutoSetup Running Auto Own Process c:\program files (x86)\pioneer\djm-900nexus\djm-900nexus_autosetup.exe Normal LocalSystem 0
I would recommend you uninstall this software and its drivers with free Revo uninstaller and check if the BSOD's continue.
Revo Uninstaller
Download and install Revo Uninstaller free from here: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

System Optimisers

Please remove the following software:

Code:
TuneUpUtilitiesDriver64.sys Fri May 25 16:28:19 2012
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence.

If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything.10 Tips on How to Properly Maintain Your Computer

Overclocking
If you are overclocking any hardware, STOP. Reset any changed values back to default.

Code:
RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
Start Menu\Programs\MSI Afterburner COCAIN-PC\Paul:Start Menu\Programs\MSI Afterburner COCAIN-PC\Paul
Start Menu\Programs\MSI Afterburner\SDK COCAIN-PC\Paul:Start Menu\Programs\MSI Afterburner\SDK COCAIN-PC\Paul


   Warning
This is overclocking software and can lead to system instability and BSOD's. Please reset all components to their stock speeds and then remove the software.


Security App

Crashes indicate Avira being a possible cause. Remove Avira and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.


Update and make full scans with both separately.



Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - How to Run Disk Check in Windows 7
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

BSOD BUGCHECK SUMMARY


Code:
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Wed Jun 5 05:44:27.000 2013 (UTC + 6:00)
System Uptime: 0 days 19:08:28.875
BugCheck D1, {fffffa8019607f18, 2, 1, fffff880023bd05e}
*** WARNING: Unable to verify timestamp for DJM-900nexusAudio64.sys
*** ERROR: Module load completed but symbols could not be loaded for DJM-900nexusAudio64.sys
Probably caused by : DJM-900nexusAudio64.sys ( DJM_900nexusAudio64+305e )
BUGCHECK_STR: 0xD1
PROCESS_NAME: firefox.exe
???????????????????????????????????????????????????????????????????????????``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Tue Jun 4 10:35:29.133 2013 (UTC + 6:00)
System Uptime: ... Read more

http://www.sevenforums.com/bsod-help-support/292633-bsod-5-10-times-day-0x000000d1-ntoskrnl-exe.html
Relevancy 68.37%

Last week I started receiving BSODs and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me I was not sure what all the problems were however I also knew that there was something seriously wrong with my hard drive so I replaced it with a new hitachi After installing windows and running smoothly updating everything and installing for several hours I had a blue screen again I ran memtest and received errors so I'm assuming it's not my RAM and because it's a new installation of windows and a new hardrive I'm assuming those aren't the issues I am planning on taking it in to a shop tomorrow to see if they can diagnose what's malfunctioning but if Multiple 0x0000001A times BSOD errors multiple someone here can tell enough then I would appreciate it Blue screens happened at multiple temperatures C C Blue screen event log I did not save the first problem signature - Provider Name BSOD Multiple times multiple errors 0x0000001A Microsoft-Windows-Kernel-Power Guid C B A- - C -AC E- C D B EventID Version Level Task Opcode Keywords x - TimeCreated SystemTime - - T Z EventRecordID Correlation - Execution ProcessID ThreadID Channel System Computer Pirro - Security UserID S- - - - EventData BugcheckCode BugcheckParameter x BugcheckParameter xfffff a BugcheckParameter xd f f b BugcheckParameter xffbff a SleepInProgress false PowerButtonTimestamp BSOD Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP FFFFF A BCP D F F B BCP FFBFF A OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users John AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:BSOD Multiple times multiple errors 0x0000001A

Hello and welcome, please try the steps below.





Quote:
Based on the bugchecks, I would recommend you follow and complete the steps given below:1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a Hard Drive Diag.

9. Test and Diagnose RAM issues with RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

10. Monitor hardware temperature for overheating issues with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor

http://www.sevenforums.com/bsod-help-support/308114-bsod-multiple-times-multiple-errors-0x0000001a.html
Relevancy 68.37%

Hello everyone,

I came here once before for assistance, but the issue was unable to be resolved. Here is the link to the previous thread.

Several BSOD, no singular triggers

There is no singular trigger to set this off. Sometimes I can go hours without any issue, other times BSOD occurs in the middle of a reboot from another BSOD.

I appreciate any help given. Thanks.

A:BSOD Multiple types multiple times a day, can't pin down the problem

Bump

http://www.sevenforums.com/bsod-help-support/350668-bsod-multiple-types-multiple-times-day-cant-pin-down-problem.html
Relevancy 68.37%

windows 7 x64
- original install on system but i don't have my disks. they are somewhere...
- full retail version installed
- age of the system is approximately 3 years
- age of the install is approximately 2 years

it seems to happen at random but i get BSODs. approximately 2-3 times a day for a week or so. then nothing for a few days. I cannot seem to reproduce it manually.

i've attached my dump files and health report as advised on this site.

i disabled my antivirus before running this set of error reports as a precaution.
any help would be greatly appreciated.

A:BSOD errors. multiple times during multiple programs

Have you recently added any RAM or new hardware to this system?

Uninstall Any Daemon Tools that you have installed. Those are a common reason for BSODs

try these:
SFC /SCANNOW Command - System File Checker

After:
Disk Check

Post back results please.

http://www.sevenforums.com/bsod-help-support/241603-bsod-errors-multiple-times-during-multiple-programs.html
Relevancy 67.94%

Hello techy folks,

I have been experiencing frequent BSODs in Windows 7. Did clean installation twice/thrice but got BSODs whatsoever. Therefore, I decided to install Windows 8 thinking that the problem would solve. It did! But now BSODs occur after around every 4 hours (as compared to Win 7 occurring twice in an hour).

I used blue screen viewer to find out what driver was causing the issue and similar to that in Win7, it's ntoskrnl.exe however, description of BSODs now differ. In Win7, BSODs used to occur with 'MEMORY_MANAGEMENT' but in Win8, 'PEN_LIST CORRUPT' and 'MEMORY_MANAGEMENT' occured twice to thrice times respectively in two days.

I've attached necessary files created using SF_Diagnostic tool .

One more thing, I'd installed SIW to find out specs and detailed drivers on my computer. I've attached what I found interesting as a screenshot.

Please help me! It's getting on my nerves since it's the first time this 'BSOD' thing has bothered me.

A:BSOD in Windows8 at frequent times (ntoskrnl.exe)

BSOD's pointed to memory corruption from various processes (Utorrent.exe, ntoskrnl.exe, MsMpEng.exe...). You might have a bad memory stick. Download Memtest86+ - Advanced Memory Diagnostic Tool and burn it to CD/USB then run the memory diagnostic, It is important to let it run over night. I've helped someone in this forum, he did not run long enough and the diagnostic may pass the first few rounds and finally we found out that was indeed he had a bad memory stick.

Good luck !!!

http://www.eightforums.com/bsod-crashes-debugging/22095-bsod-windows8-frequent-times-ntoskrnl-exe.html
Relevancy 67.94%

I have gotten the BSOD about 15 times over the past month or so, and I am not sure why. I used the program BlueScreenView to lok at my dump files, and it said the causing drivers were either ntoskrnl.exe, hal.dll, or usbhub.sys each time. I have no idea where to turn, so I posted here. Attached is my data from the SF Diagnostic Tool. Thanks in advance

A:BSOD several times, analyzer points to ntoskrnl.exe and hal.dll

Sorry, I posted before it was finished uploading.

http://www.sevenforums.com/bsod-help-support/318348-bsod-several-times-analyzer-points-ntoskrnl-exe-hal-dll.html
Relevancy 67.94%

Hi i am new to this, i keep getting blue screen at random and dont know how to debug minidump file and i am running out of patience with this pc thanks in advance and that is the most recent one ive had.

On Thu 18/10/2012 13:23:57 GMT your computer crashed
crash dump file: C:\Windows\Minidump\101812-68344-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x87AE9)
Bugcheck code: 0x24 (0x1904FB, 0xFFFFF880089F3618, 0xFFFFF880089F2E70, 0xFFFFF80002CE444F)
Error: NTFS_FILE_SYSTEM
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates a problem occurred in the NTFS file system.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

A:BSOD at random times, error ntoskrnl.exe

Welcome

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

Post a screen shot with crystal disk info:CrystalDiskInfo - Software - Crystal Dew World
Screenshots and Files - Upload and Post in Seven Forums

Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check

Hard drive test both short and long with: SeaTools for Windows

Also the DOS version of:SeaTools for DOS

http://www.sevenforums.com/bsod-help-support/259245-bsod-random-times-error-ntoskrnl-exe.html
Relevancy 67.94%

Hi everyone I'm trying to get some help with these BSODs I'm getting times, error0x0000003b Ntoskrnl.exe, at random BSOD Dump BSOD at random times, Ntoskrnl.exe, error0x0000003b File - BSOD at random times, Ntoskrnl.exe, error0x0000003b - dmp Crash Time AM Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff d Parameter fffff bbab Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe cc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe cc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Hardware HP Pavillion Elite OEM Windows Home Premium x AMD Phenom II X T Processor GB RAM TB Seagate Barracuda AMD Radeon HD I've already sent the computer back to HP once and they claimed to hae replaced the mobo but since I've gotten the computer back I've had BSODs caused by Ntoskrnl exe The first one was overnight with the PC idling The second was while streaming HD video content from giantbomb com I've been searching this constantly but I have not been able to find any useful information so I thought I'd try here Thanks in advance for any help

A:BSOD at random times, Ntoskrnl.exe, error0x0000003b

Hello Rival and welcome.

Fairly hard to analyse these dumps, but we have a few regular things to try.

Run MemTest86+

SYSTEM_SERVICE_EXCEPTION could cause a mem-corruption.

RAM - Test with Memtest86+

Update your Graphic Driver (ATI)

As far as I can see you have an ATI-card. The bug-check can also indicate broken Graphic Driver. Do the process below.

i) Find your driver here, save it to your desktop
ii) Download Driver sweeper, for the leftover files
iii) Uninstall your driver from the Control Panel
iv) While rebooting, go into safe-mode without internet (tip: plugout your LAN cable or disconnect wireless)
v) Run Driver Sweeper, click all the Nvidia components and analyse them
vi) Clean them all
vii) Head into Windows, without internet
viii) Install the Driver from the desktop
Thank you for your attention, and keep uploading dumps for further analyses.

Welcome to SevenForums again.
Fred.

http://www.sevenforums.com/bsod-help-support/198534-bsod-random-times-ntoskrnl-exe-error0x0000003b.html
Relevancy 67.94%

Hey everyone Im sorry if im incorrectly posting this but im new here! Ive seen many different posts regarding the ntoskrnl.exe bsod. But they all seem to be fixes for that exact case so i thought i would put mine and include the dmp.

I have a hp desktop with 3gb of ram and a upgraded version of windows 7.

A:BSOD at random times when not using computer, ntoskrnl.exe

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {fffff6fb80008000, ffffffffc000000e, 5d8f5880, fffff70001000000}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36c1a )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fb80008000, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000000e, error status (normally i/o status code)
Arg3: 000000005d8f5880, current process (virtual address for lock type 3, or PTE)
Arg4: fffff70001000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Code:
ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR: 0x7a_c000000e

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: smss.exe

CURRENT_IRQL: 0
Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

Hard Drive/Storage

Post a screen shot using Crystal Disk Info: CrystalDiskInfo Standard Edition

How to Upload and Post a Screenshot and File in Seven Forums

Make a hard drive test from the hard drive manufacturers website: Hard Drive Diagnostic Procedure

Basic checks: Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - How to Run Disk Check in Windows 7
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

http://www.sevenforums.com/bsod-help-support/290226-bsod-random-times-when-not-using-computer-ntoskrnl-exe.html
Relevancy 67.08%

Hi everyone Asus X L owner here This notebook 3 - ntoskrnl.exe service BSOD Asus X550L times in already has been giving me trouble since I bought it I was three times in service already First time they said it looks fine they replaced the HDD though Second time they said they have replaced the motherboard Third time new motherboard new HDD Keeps giving me the BSOD I am out of options and the notebook has only days or so of warranty left Also this notebook has been been used maybe two weeks combined since I purchased it in April I have followed your guide to post the dump files so here they are ASUS-Sun zip Many thanks for those who will share their thoughts on this matter Also a couple of Asus X550L BSOD - ntoskrnl.exe 3 times in service already more errors are Asus X550L BSOD - ntoskrnl.exe 3 times in service already to be found using the Event Viewer function in Windows The speed of processor in group is being limited by system firmware The processor has been in this reduced performance state for seconds since the last report One for each processor

http://www.eightforums.com/bsod-crashes-debugging/74083-asus-x550l-bsod-ntoskrnl-exe-3-times-service-already.html
Relevancy 67.08%

First of all, thanks for taking the time to help me out with this issue. It has been a long ongoing issue, that I have only recently begun to repair. Initially my system had an ASUS M4A89TD Pro mobo, 4GB OCZ Black Edition RAM, and a Sapphire Radeon HD 5770 GPU. I have since replaced the mobo with a Biostar TA970, the RAM has been replaced with 8GB Mushkin Enhanced Blackline DDR3 1600 RAM, and the GPU with an EVGA GTX 660. The BSODs do not appear to happen as often anymore, but it usually happens 3-6 times daily. Usually while gaming, when loading levels or something similar(not during gameplay), or when opening a webpage with a video, but not always.

I have attached the BSOD crash zip file, please let me know what other information or steps I need to take. Thanks again.

A:BSOD at random times(it seems) - ntoskrnl.exe commonly referenced

Update - After trying to update some drivers, the computer reboots, recommending to run Startup Repair. If I skip start up repair the PC BSODs after showing loading windows. I launched the Startup Repair and let it do the automatic fix. Rebooted, same deal. Launched Startup Repair again, went into advanced and opened command prompt and am running chkdsk /r /f (second time this week). Chkdsk is currently still running, but this makes me think I should probably replace my hard drive...

Thoughts?

http://www.sevenforums.com/bsod-help-support/339416-bsod-random-times-seems-ntoskrnl-exe-commonly-referenced.html
Relevancy 67.08%

Most of the time I get a BSOD with ntoskrnle.exe

Updated video card drivers and motherboard drivers. Had an ATI graphics card, pulled it and removed drivers. Running only onboard Intel hd3000 to eliminate the graphics card.
Same thing.
Motherboard: Asus P8H67M Pro

Any ideas to nail this one down?

Last few minidumps attached.

A:BSOD: random times, daily, ntoskrnl.exe and sometimes dxgmms1.sys

Welcome

All of the minidump files blame usbhub.sys, do you have usb hub. The bugcheck code is FE, which usually point to USB device driver. One generic way to solve issue with usb BSODs is to go to device manager, under usb list, click properties and uninstall everything, then restart your computer


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80082fe060, fffff80000b9c3d8, fffffa80088016b0}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : usbhub.sys

Followup: MachineOwner
Let us know if it helps

http://www.sevenforums.com/bsod-help-support/251428-bsod-random-times-daily-ntoskrnl-exe-sometimes-dxgmms1-sys.html
Relevancy 67.08%

Hey everyone, this is my first time here so i hope i did this correct.

I built this computer about a week ago and ive gotten 3 BSOD?s at seemingly random times

BSOD 1 and 3 happend when the system was under some load, (1) playing League of legends and (3) Playing Minecraft.

The 2 one happend while the system was "IDLEing" i wasn't doing anything intensive, but i had Firefox, Chrome, Skype and probably some other program open in the background.

I noticed that ntoskrnl.exe was part of all the BSOD?s.

I haven't done any done any memory tests yet.
Ive done some tests on the SSD, chkdsk and a SFC scan no errors reported

Ive had some problem getting all the Asus chipset drivers installed and are instead using the ones from windows/windows update.

Hope this is enuff information for now.

EDIT - I ran Memtest86 for about 10hrs and it passed with no errors.

//Andreas

A:New Built PC BSODīs at seemingly random times (ntoskrnl.exe)

  
Quote: Originally Posted by thespeedmaster


Hey everyone, this is my first time here so i hope i did this correct.

I built this computer about a week ago and ive gotten 3 BSOD?s at seemingly random times

BSOD 1 and 3 happend when the system was under some load, (1) playing League of legends and (3) Playing Minecraft.

The 2 one happend while the system was "IDLEing" i wasn't doing anything intensive, but i had Firefox, Chrome, Skype and probably some other program open in the background.

I noticed that ntoskrnl.exe was part of all the BSOD?s.

I haven't done any done any memory tests yet.
Ive done some tests on the SSD, chkdsk and a SFC scan no errors reported

Ive had some problem getting all the Asus chipset drivers installed and are instead using the ones from windows/windows update.

Hope this is enuff information for now.

EDIT - I ran Memtest86 for about 10hrs and it passed with no errors.

//Andreas


Hello Andreas,

Seems like the crashes might be caused by AsIO.sys i.e. ASUS Probe. You need to uninstall them from Programs and Features. Infact uninstall all the Asus Utilities except the drivers. Also other issue with VirtuWDDM.sys i.e. Virtu MVP so I would recommend to reinstall it.

Updated your SSD Firmware lot of occasion an out dated firmware could cause BSOD.

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\080512-34835-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Aug 5 03:38:20.367 2012 (GMT+5)
System Uptime: 0 days 9:59:58.163
BugCheck 19, {20, fffffa80111d8e30, fffffa80111d9250, 4420045}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!FsRtlUninitializeOplock+309 )
BUGCHECK_STR: 0x19_20
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x19_20_nt!FsRtlUninitializeOplock+309
Bugcheck code 00000019
Arguments 00000000`00000020 fffffa80`111d8e30 fffffa80`111d9250 00000000`04420045
BiosVersion = 1205
BiosReleaseDate = 06/01/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
MaxSpeed: 3400
CurrentSpeed: 3417
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\080312-20217-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Fri Aug 3 22:20:50.096 2012 (GMT+6)
System Uptime: 0 days 4:04:08.892
BugCheck 1E, {ffffffffc0000005, fffff80002e66954, ffffffffffffffff, 0}
*** WARNING: Unable to verify timestamp for AsIO.sys
*** ERROR: Module load completed but symbols could not be loaded for AsIO.sys
Probably caused by : AsIO.sys ( AsIO+1868 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: atkexComSvc.ex
FAILURE_BUCKET_ID: X64_0x1E_AsIO+1868
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffff800`02e66954 ffffffff`ffffffff 00000000`00000000
BiosVersion = 1205
BiosReleaseDate = 06/01/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
MaxSpeed: 3400
CurrentSpeed: 3417
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\080112-22042-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Wed Aug 1 23:31:24.784 2012 (GMT+5)
System Uptime: 0 days 1:10:05.581
BugCheck 3B, {c0000005, fffff8800437b758, fffff88009a8c790, 0}
Probably caused by : VirtuWDDM.sys ( VirtuWDDM+4758 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: arma2oa.exe
FAILURE_BUCKET_ID: X64_0x3B_VirtuWDDM+4758
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff880`0437b758 fffff880`09a8c790 00000000`00000000
BiosVersion = 1205
Bi... Read more

http://www.sevenforums.com/bsod-help-support/244671-new-built-pc-bsod-s-seemingly-random-times-ntoskrnl-exe.html
Relevancy 67.08%

Hello everyone I am completely BSOD at times (nt+0x75BC0)] [ntoskrnl.exe random not very tech savy but I decided to build my own gaming PC to save some money and to my luck have been experiencing common BSODs I had Windows installed and after the unfamiliarity and annoyance it caused me I switched to Windows Both versions of Windows had common BSODs Using WhoCrashed ntoskrnl exe seems to be a common factor in all the crashes MY computer BSOD at vary random points from doing absolutely nothing to gaming which is what I built the computer for Below is a list of the crash reports from WhoCrashed I would appreciate any help with this situation System Information local -------------------------------------------------------------------------------- windows version Windows Service Pack build windows dir C Windows Hardware Z X-UD H Gigabyte Technology Co Ltd Z X-UD H-CF CPU GenuineIntel Intel R Core TM i - K CPU GHz Intel level logical processors active mask RAM total VM free -------------------------------------------------------------------------------- Crash Dump Analysis -------------------------------------------------------------------------------- Crash dump directory BSOD at completely random times [ntoskrnl.exe (nt+0x75BC0)] C Windows Minidump Crash dumps are enabled on your computer On Sat PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x BC Bugcheck code x F x xFFFFFA D A xFFFFF D xFFFFFA D E E Error DRIVER POWER STATE FAILURE file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Sat PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x BC Bugcheck code x x D A x x xFFFFF FCEB Error APC INDEX MISMATCH file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that there has been a mismatch in the APC state index The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Sat PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x BC Bugcheck code x x xFFFFF D xFFFFF D xFDFFF D Error BAD POOL HEADER file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a pool header is corrupt This appears to be a typical software driver bug and is not likely to be caused by a hardware problem This might be a case of memory corruption More often memory corruption happens because of software errors in buggy drivers not because of faulty RAM modules The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Sat PM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x BC Bugcheck code xA x x x xFFFFF E F F Error IRQL NOT LESS OR EQUAL file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH LEVEL or above This appears to be a typical software driver bug and is not likely to be c... Read more

A:BSOD at completely random times [ntoskrnl.exe (nt+0x75BC0)]

   Information
Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

If you need to add new information like the dump files, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

If your computer is not creating DMP Files please follow this link: Dump Files - Configure Windows to Create on BSOD

I look Forward to Helping you.

http://www.sevenforums.com/bsod-help-support/346271-bsod-completely-random-times-ntoskrnl-exe-nt-0x75bc0.html
Relevancy 66.65%

Hey there I've been trying to solve a BSOD problem I've been having for quite a while and decided to ask here for some help The BSODs as far as I can tell happen randomly I could be watching a YouTube video and I get a BSOD I could be talking to people on TeamSpeak refer seemingly times, BSOD random typical to ntoskrnl.exe at and I get a BSOD I could be playing League of Legends and I get a BSOD I've ran memory test over night getting passes in with no errors BSOD at seemingly random times, typical refer to ntoskrnl.exe I've reinstalled my BSOD at seemingly random times, typical refer to ntoskrnl.exe graphics driver follow this I've also ran Furmark following this tutorial for minutes without the temperature ever raising above C While trying to figure out why I have been receiving BSODs I noticed something odd about my memory usage If I total up my total memory usage using tasklist I get that about GB of RAM is being used but if I check physical memory in Task Manager it says of memory is being used and with GB of RAM installed is about GB I don't know if this extra GB could be a problem or even the cause of my BSODs or it isn't an issue at all but I thought it wouldn't hurt to mention this Attached is the DM Log Collector If you have any ideas or things that I should do please let me know I'm getting mildly frustrated with these BSODs and would really appreciate any amount of help

A:BSOD at seemingly random times, typical refer to ntoskrnl.exe

Hi hdt80.

A lot of different errors are showing up. A good proportion of that lot is pointing to the Mad Katz R.A.T.5. Mouse and the Keyboard.

Code:
fffff880`0313f568 fffff880`05fae514Unable to load image \SystemRoot\system32\DRIVERS\SaiK1705.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SaiK1705.sys
*** ERROR: Module load completed but symbols could not be loaded for SaiK1705.sys
SaiK1705+0x2514
I would suggest you to use any other Keyboard-mouse to see how it goes .... as least it stops the keyboard-mouse related issue (as reported in the logs) or not.

It may needed much more further actions.

http://www.sevenforums.com/bsod-help-support/348447-bsod-seemingly-random-times-typical-refer-ntoskrnl-exe.html
Relevancy 66.65%

Hello

My computer BSOD about 9-10 times a day and it's quite annoying.
Here is what I tried:
1. Upgraded from windows 7 to windows 10
2. Ran memtest - RAM had about 30 problems but then I put the ram in another computer and ran the test there-> 0 errors
3. Updated GPU drivers
4. Ran scannow from command prompt ->no problems

I attached the minidump of one of the most common type of BSOD(by ntoskrnl.exe)

Can someone please identify the problem? Im clueless about BSOD. Thank you

A:ntoskrnl.exe causing BSOD at random times , error 0x0000003b

Hi SmithyBoy,

I'll go deeper on the memtest part.
Did you run memtest on each stick in each used slot separated from the other sticks?

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

http://www.tenforums.com/bsod-crashes-debugging/35161-ntoskrnl-exe-causing-bsod-random-times-error-0x0000003b.html
Relevancy 65.79%

Is Windows 7...
-x64 Professional Edition
-Custom Build
-Re-installed Windows 3 months ago

Built in September of 2010.

Getting the BSOD almost everyday now and have no idea how to fix it.

Thanks for any and all help!!!

A:BSOD 2-3 times a day, error: Unexpected Kernel Mode Trap-ntoskrnl.exe

Problem Devices:
Code:
Microsoft ISATAP Adapter ROOT\*ISATAP\0000 This device cannot start.
Teredo Tunneling Pseudo-Interface ROOT\*TEREDO\0000 This device cannot start.

Security Software:
Code:
avastsvc.exe c:\program files\avast software\avast\avastsvc.exe 1596 8 200 1380 3/20/2012 8:43 AM 7.0.1426.0 43.72 KB (44,768 bytes) 3/19/2012 1:40 PM
avastui.exe c:\program files\avast software\avast\avastui.exe 3884 8 200 1380 3/20/2012 8:44 AM 7.0.1426.0 4.05 MB (4,241,512 bytes) 3/19/2012 1:40 PM


Code:

Loading Dump File [D:\Kingston\BSODDmpFiles\lamordnt\Windows_NT6_BSOD_jcgriff2\032012-19234-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (12 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`0300f000 PsLoadedModuleList = 0xfffff800`03253650
Debug session time: Tue Mar 20 09:41:57.001 2012 (UTC - 6:00)
System Uptime: 0 days 0:13:07.388
Loading Kernel Symbols
...............................................................
................................................................
.............................................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {8, 80050033, 6f8, fffff80003089414}

Probably caused by : memory_corruption

Followup: memory_corruption
---------

10: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050033
Arg3: 00000000000006f8
Arg4: fffff80003089414

Debugging Details:
------------------
BUGCHECK_STR: 0x7f_8

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: CODE_CORRUPTION

PROCESS_NAME: plugin-contain

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff8000308b2e9 to fffff8000308bd40

STACK_TEXT:
fffff880`034c6ee8 fffff800`0308b2e9 : 00000000`0000007f 00000000`00000008 00000000`80050033 00000000`000006f8 : nt!KeBugCheckEx
fffff880`034c6ef0 fffff800`030897b2 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`034c7030 fffff800`03089414 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb2
fffff880`0b173f80 00000000`000000... Read more

http://www.sevenforums.com/bsod-help-support/220293-bsod-2-3-times-day-error-unexpected-kernel-mode-trap-ntoskrnl-exe.html
Relevancy 64.5%

-Windows 7 64bit
-original os windows vista
-full retail version
-2008 hp pavilion
-windows 7 installed in 2011 after upgraded hard-drive and some other goodies
The computer was given to me by a friend who had no more use for it but decided to upgrade it before he did. I'm not sure how it was running before but i was soon to find out that it gets a lot of BOD's. Was planning to use it for school and don't have any money to buy a new one so any help would be appreciated Thanks!

A:multiple BSOD ntoskrnl.exe

Hello,

Start by flashing the latest BIOS for the machine, found here: Napa-GL8E Motherboard BIOS Update HP Pavilion a6500f Desktop PC - HP Customer Care (United States - English)

Your Broadcom wireless adapter drivers were blamed multiple times. Unfortunately, HP has not released updated ones on their site, but you can probably get away with installing ones from another manufacturer. Dell has some here: Drivers and Downloads

More than likely, the Dell installer will error out as it realizes you do not have a Dell card. However, if you cancel the installer after the files have finished extracting, you can then manually install the drivers using Device Manager. Enter "devmgmt.msc" into the start menu, right-click on the wireless adapter, and select "update driver software". Select "Browse my computer...", and choose the location the drivers were extracted to. By default, the extraction will take place in C:\dell\drivers\R258276.
Code:
bcmwl664.sys Tue Jul 07 20:45:04 2009 (4A53EC10)
Windows 7 SP1 should be installed: Learn how to install Windows 7 Service Pack 1 (SP1)

Also:
Code:
Event[2928]:
Log Name: System
Source: Display
Date: 2011-08-16T18:55:17.000
Event ID: 4101
Task: N/A
Level: Warning
Opcode: Info
Keyword: Classic
User: N/A
User Name: N/A
Computer: Viv-PC
Description:
Display driver nvlddmkm stopped responding and has successfully recovered.
Install updated nVidia display drivers from here: Drivers - Download NVIDIA Drivers
Code:
nvlddmkm.sys Thu May 14 16:48:07 2009 (4A0C8387)
That's all the software causes I can see (at least for now). If the BSODs persist, upload a fresh jcgriff2 report, and based on that, we may start running hardware diagnostics or try to address other software issues.

...Summary of the dumps:

Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 12 23:35:28.928 2011 (UTC - 4:00)
System Uptime: 0 days 0:29:21.175
*** ERROR: Module load completed but symbols could not be loaded for usbhub.sys
*** ERROR: Symbol file could not be found. Defaulted to export symbols for USBPORT.SYS -
Probably caused by : usbhub.sys ( usbhub+129ec )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xFE
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xFE_usbhub+129ec
BiosReleaseDate = 03/28/2008
SystemProductName = KQ495AA-ABA a6500f
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 12 23:48:24.301 2011 (UTC - 4:00)
System Uptime: 0 days 0:02:55.548
*** WARNING: Unable to verify timestamp for bcmwl664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl664.sys
Probably caused by : bcmwl664.sys ( bcmwl664+1b0d3 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: ccSvcHst.exe
FAILURE_BUCKET_ID: X64_0xD1_bcmwl664+1b0d3
BiosReleaseDate = 03/28/2008
SystemProductName = KQ495AA-ABA a6500f
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 12 23:44:49.650 2011 (UTC - 4:00)
System Uptime: 0 days 0:08:41.898
*** WARNING: Unable to verify timestamp for bcmwl664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl664.sys
Probably caused by : bcmwl664.sys ( bcmwl664+98062 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: ccSvcHst.exe
FAILURE_BUCKET_ID: X64_0xA_bcmwl664+98062
BiosReleaseDate = 03/28/2008
SystemProductName = KQ495AA-ABA a6500f
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Thu Sep 8 17:53:36.494 2011 (UTC - 4:00)
System Uptime: 0 days 0:01:13.741
Probably caused by : ntkrnlmp.exe ( nt!KeWaitForSi... Read more

http://www.sevenforums.com/bsod-help-support/185593-multiple-bsod-ntoskrnl-exe.html
Relevancy 64.5%

hi
laptop model: msi gt70 dragon edition 2

Happens randomly please help .

A:Multiple BSOD ntoskrnl.exe win 8.1

Only 22 Windows Updates installed. Most systems have 60 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

At times the Killer Network Manager may cause BSOD problems:





NOTE: See this link first: BSOD while playing on msi gt70 dragon edition 2 (thanks to kaelaan) It appears that the Killer Service problem was solved with the latest release of the Qualcomm versions of the drivers (so try updating to a version dated from later in 2014).




The Qualcomm Atheros Killer Service/KillerNetManager is known to cause BSOD's. Please follow the workaround instructions here:





First, open the Run dialog (Win + R keys) and type in "services.msc" (without the quotes) and press Enter
Scroll down and locate the "Qualcomm Atheros Killer Service" and right click on it. Select "Stop"
Right click on it again and this time select "Properties"
In the dropdown box for "Startup type", select "Disabled", then click on the "OK" button at the bottom of the window

Next, open Task Manager (right click on TaskBar and select "Task Manager")
Click on the "More details" dropdown (if present)
Click on the "Startup" tab
Scroll down and locate the "KillerNetManager" entry, right click on it and select "Disable"
There may also be an Install Shield (with the Killer gaming K next to it), if so Right click on it and select "Disable"
Finally, restart the system in order for the changes to take affect.



At times the Killer Network Manager will continue to load. If so, it's usually listed in the MSINFO32...Software Environment...Startup Programs section. If it is, please try this:





It may be that the instructions aren't stopping everything.
In some cases, there's a program running out of the Program Files/Program Files (x86) directory.
"c:\program files\qualcomm atheros\killer network manager\killer~1.exe" (NOTE: killer~1.exe is most likely killernetmanager.exe)
In other cases, there's a program running out of c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe (the long string of letters and numbers may change)

Here's some things to try
1) Please see if there are any entries in the Startup tab of Task Manager that are related to Qualcomm/Atheros/Killer Network Manager (and NOT the card itself) and disable them (please let us know what you find) Be careful as the wrong selection can disable the network card.
2) Check in "msconfig" for any entries that aren't in the Startup tab of Task Manager. Let us know if you find any Qualcomm/Atheros/Killer entries there (we'll disable them differently if they are there).
3) Locate the "c:\program files\qualcomm atheros\killer network manager\killer~1.exe" and rename the .exe to .BAD (the killer~1 is actually a filename that starts with killer and ends with .exe) There will be an error in event viewer, but it'll stop the bugger from loading.
4) Locate the "c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe" entry and rename the last .exe to .BAD (the long string of letters and numbers may change)

Just FYI - here are the MSI workaround instructions: MSI USA











Out of 16 memory dumps there were 5 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we... Read more

http://www.eightforums.com/bsod-crashes-debugging/46421-multiple-bsod-ntoskrnl-exe-win-8-1-a.html
Relevancy 64.5%

Hello So I've recently created my own custom build computer and have had multiple BSoD's to the point of me worrying frantically as to why they're reoccurring with higher frequency ntoskrnl.exe - Multiple BSoD's The activities I usually participate in which BSoD's happen are Watching YouTube videos sometimes have Multiple BSoD's - ntoskrnl.exe more than two open in separate Google Chrome tabs Opening multiple tabs in Google Chrome Not always the case - tabs open as I'm typing this Playing games such as League of Legends RuneScape or Mortal Kombat Leaving the computer idle or in Sleep Mode I've tried Re-installing Windows Professional x Using BlueScreenView to identify the fault finding that three of four BSoD's since re-installation of Windows were caused by quot ntoskrnl exe quot whilst one was caused by quot Ntfs sys quot and quot ntoskrnl exe quot Running Memtest for Passes with no errors Running a Visual Memory Stress test Running Malwarebytes and CCleaner along with Multiple BSoD's - ntoskrnl.exe avast Antivirus to no avail Updating all known Drivers I can possibly think of probably missing a ton Checking for new Windows Updates - I have SP and there are no new updates available BSoD's so far This list by the looks of it is going to get much worse - - dmp - - SYSTEM SERVICE EXCEPTION - x b - - dmp - - MEMORY MANAGEMENT - x a - - dmp - - NTFS FILE SYSTEM - Multiple BSoD's - ntoskrnl.exe x - - dmp - - PAGE FAULT IN NONPAGED AREA - x - - dmp - - PAGE FAULT IN NONPAGED AREA - x - - dmp - - MEMORY MANAGEMENT - x a - - dmp - - MEMORY MANAGEMENT - x a - - dmp - - PAGE FAULT IN NONPAGED AREA - x Side Note I've been noticing Google Chrome Adobe Shockwave crashing regularly and tabs reverting to quot Aw Snap quot whilst games crash either mid-way after automatic closure League of Legends or manual closure I've even had League of Legends tell me my client files may be corrupt and ask me to repair my installation has never had that issue before Something really is wrong and I am at my wits end with this All computer hardware components are new except for speakers and my headset and this has been happening daily for the past week If anyone can shed some light on the situation I'm not much of a computer guru I'd be over the moon

A:Multiple BSoD's - ntoskrnl.exe

Seems I just had another BSoD, involving "ntoskrnl.exe" and "win32k.sys" with the Bug Check String "PAGE_FAULT_IN_NONPAGED_AREA" - 0x00000050

I was playing RuneScape whilst watching a YouTube video this time, about five tabs in Google Chrome (mostly this forum).

I updated the main post list of BSoD's, but I'll attach the .zip file made by dm log collector in this post as I don't know if replacing the old .zip will delete any information needed of the previous BSoD's.

http://www.sevenforums.com/bsod-help-support/334137-multiple-bsods-ntoskrnl-exe.html
Relevancy 64.5%

Hi guys!Made a fresh Win10 install with just basic software (Like whocrashed)I have tried using the Guru3Ds tool to remove all traces of old video card drivers and installed the newest ones without any extra software or bloatware.Have ran Memtest for 24 hours without a fault.I am still getting BSODs from ntoskrtnl all the time.Any pointers?

http://www.bleepingcomputer.com/forums/t/625432/multiple-ntoskrnl-bsod/
Relevancy 64.5%

I've got a new Laptop with Windows 8, after upgrading to Win 8.1 and installing Fujitsu Drivers and some Software many BSOD occur, saying
PAGE_FAULT_IN_NONPAGED_AREA ntoskrnl.exe
or
PAGE_FAULT_IN_NONPAGED_AREA hal.dll.

Attached is the SF file,
Thanks for your help

trailracer

A:Win 8.1 multiple BSOD hal.dll, ntoskrnl.exe

Drivers that must be updated or removed:


Code:
1: kd> lmvm fcrimg4
start end module name
fffff800`019b5000 fffff800`019c4000 fcrimg4 (deferred)
Image path: fcrimg4.sys
Image name: fcrimg4.sys
Timestamp: Fri Nov 13 08:02:43 2009 (4AFD58F3)
CheckSum: 00015429
ImageSize: 0000F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Update or uninstall SecureDrive software.


Code:
1: kd> lmvm FUJ02B1
start end module name
fffff800`02aff000 fffff800`02b00e80 FUJ02B1 (deferred)
Image path: FUJ02B1.sys
Image name: FUJ02B1.sys
Timestamp: Wed Nov 01 05:50:43 2006 (45486DF3)
CheckSum: 000118FB
ImageSize: 00001E80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Update the Fujitsu FUJ02B1 Device Driver, or uninstall it completely from the machine.


Code:
2: kd> lmvm rtcrfilt64
start end module name
fffff800`013f0000 fffff800`013f9000 rtcrfilt64 (deferred)
Image path: \SystemRoot\System32\drivers\rtcrfilt64.sys
Image name: rtcrfilt64.sys
Timestamp: Thu Dec 01 04:43:09 2011 (4ED74C2D)
CheckSum: 0001014D
ImageSize: 00009000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Driver Reference Table - rtcrfilt64.sys

You should also update the Realtek HD Audio codec driver to newest (pay attention to installer's instructions):


Code:
2: kd> lmvm RTKVHD64
start end module name
fffff800`02a72000 fffff800`02e5e500 RTKVHD64 (deferred)
Image path: \SystemRoot\system32\drivers\RTKVHD64.sys
Image name: RTKVHD64.sys
Timestamp: Mon Aug 27 01:57:17 2012 (503B0C3D)
CheckSum: 003FD45C
ImageSize: 003EC500
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.eightforums.com/bsod-crashes-debugging/39055-win-8-1-multiple-bsod-hal-dll-ntoskrnl-exe.html
Relevancy 64.5%

I have recently gotten the Blue Screen of Death Multiple Times in the past month. Usually it was probably once every 5 days and just today alone, i've gotten it 3 times. 2 times was from playing a movie using VLC Player and i received the STOP:0x0000008E Blue Screen of Death Later. I tried replaying the video and the same thing happened at the same part, same error. a couple hours later, i decided to play a video game and at first the game crashed then i restarted. As i started playing again, i got the Blue screen of death STOP: 0x00000050 error.

A:BSOD Multiple Times in 1 Day

Download BlueScreenView (in Zip file)No installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.===================================================Download System Information for Windows (SIW free version)No installation required.After it scans your computer, navigate to Hardware>Sensors and post all info from there.

http://www.bleepingcomputer.com/forums/t/411622/bsod-multiple-times-in-1-day/
Relevancy 64.5%

Don't know why keep having BSOD

A:BSOD for multiple times

Hello HondoJames,

I took a look at your BSODs. They almost all referenced mfewfpk.sys which is the driver for McAfee.





1) uninstall McAfee
2) install MSE for the troubleshooting process
3) monitor for additional BSODS



remove the following programs until your BSODs are fixed:
avast!
COMODO
daemon tools
   Warning
Only have one antivirus running at the same time
Please look for updates for the following drivers:ASMMAP64.sys Thu Jul 02 05:13:26 2009
igdkmd64.sys Wed Sep 26 15:49:04 2012
nvlddmkm.sys Thu Jan 10 14:41:20 2013
most recent memory dump

Code:
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000158, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88001f9f744, address which referenced memory
Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80156759168
GetUlongFromAddress: unable to read from fffff801567591f8
0000000000000158 Nonpaged pool
CURRENT_IRQL: 2
FAULTING_IP:
tcpip!WfpProcessOutTransportStackIndication+e3684
fffff880`01f9f744 f0ff8058010000 lock inc dword ptr [rax+158h]
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
PROCESS_NAME: System
TAG_NOT_DEFINED_c000000f: FFFFF88000AA5FB0
TRAP_FRAME: fffff88000a9dbd0 -- (.trap 0xfffff88000a9dbd0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa8008e1cdd0
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88001f9f744 rsp=fffff88000a9dd60 rbp=fffff88000a9deb0
r8=fffff88000a9df08 r9=fffff88000a9dff8 r10=fffffa800497aae0
r11=000000000000001b r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
tcpip!WfpProcessOutTransportStackIndication+0xe3684:
fffff880`01f9f744 f0ff8058010000 lock inc dword ptr [rax+158h] ds:00000000`00000158=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff8015645a569 to fffff8015645b240
STACK_TEXT:
fffff880`00a9da88 fffff801`5645a569 : 00000000`0000000a 00000000`00000158 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`00a9da90 fffff801`56458de0 : 00000000`00000001 fffffa80`08e1cdd0 ffffca36`ebee6e00 fffff880`00a9dbd0 : nt!KiBugCheckDispatch+0x69
fffff880`00a9dbd0 fffff880`01f9f744 : fffff880`00a9deb0 fffffa80`04978490 00000000`00000001 fffffa80`08e1cdd0 : nt!KiPageFault+0x260
fffff880`00a9dd60 fffff880`01ebefae : fffff880`00a9e340 00000000`00000002 00000000`000097e3 fffff801`5667302f : tcpip!WfpProcessOutTransportStackIndication+0xe3684
fffff880`00a9df80 fffff880`01ec66de : fffffa80`00000000 00000000`00000000 00000000`00000000 fffffa80`049b1b0c : tcpip!WfpInspectSendNonTcpDatagram+0x15e
fffff880`00a9e090 fffff880`01ec73fa : 00000000`20000001 fffff880`00a9e300 fffff880`00a9e470 00000000`20000001 : tcpip!IppInspectLocalDatagramsOut+0x4fe
fffff880`00a9e260 fffff880`01e6431e : fffff880`00a9e600 fffff880`01ff2b90 fffffa80`049e0d10 fffffa80`049fcb40 : tcpip!IppSendDatagramsCommon+0x3da
fffff880`00a9e420 fffff880`0209c8c8 : fffffa80`046bff10 ffffffff`fff9e580 00000000`00000002 fffffa80`0aa18c70 : tcpip!IppInspectInjectRawSend+0x18e
fffff880`00a9e610 fffff801`564b07a6 : fffffa80`049e0fa0 fffffa80`049e0fa0 fffffa80`04f73690 fffffa80`049e0f01 : fwpkclnt!FwppInjectionStackCallout+0xc8
fffff880`00a9e6a0 fffff801`564b3205 : fffff880`0209c800 fffff880`00a9e860 00000000`00000010 fffff880`021294b0 : nt!KeExpandKernelStackAndCalloutInternal+0xe6
fffff880`00a9e7a0 fffff880`0209c2c1 : 00000000`00000000 00000000`00000003 00000000`00000000 0000... Read more

http://www.eightforums.com/bsod-crashes-debugging/25203-bsod-multiple-times.html
Relevancy 64.5%

Computer has bsod mutiple times per day now; it used to just become unresponsive with a black screen when left on overnight and i had to reboot. NOw, while working, its giving me bsod.

greately appreciate any help from the members.
thankyou

A:bsod multiple times per day;

Wow - Fix your start-up items please!


Code:
RoboForm "c:\program files (x86)\siber systems\ai roboform\robotaskbaricon.exe" NT AUTHORITY\SYSTEM HKU\S-1-5-18\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Backblaze "c:\program files (x86)\backblaze\bzbui.exe" -quiet NT AUTHORITY\SYSTEM HKU\S-1-5-18\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Sidebar %programfiles%\windows sidebar\sidebar.exe /autorun NT AUTHORITY\LOCAL SERVICE HKU\S-1-5-19\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Sidebar %programfiles%\windows sidebar\sidebar.exe /autorun NT AUTHORITY\NETWORK SERVICE HKU\S-1-5-20\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
RoboForm "c:\program files (x86)\siber systems\ai roboform\robotaskbaricon.exe" XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
swg "c:\program files (x86)\google\googletoolbarnotifier\googletoolbarnotifier.exe" XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Speaking Clock Lite c:\program files (x86)\speaking clock\spclock.exe XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
IBWin Monitor "c:\ibackup for windows\ibmonitor.exe" min XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
IBWin Background process "c:\ibackup for windows\ibackground_955.exe" XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Copernic Desktop Search - Professional "c:\program files (x86)\copernic desktop search - pro\desktopsearchservice.exe" /tray XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
AlcoholAutomount "c:\program files (x86)\alcohol soft\alcohol 120\axautomntsrv.exe" -automount XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Power2GoExpress8 na XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
AlwaysMouseWheel "c:\users\kambiz\appdata\local\temp\wz43dc\alwaysmousewheel.exe" -bg XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
OpAgent "opagent.exe" /agent XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Spotify Web Helper "c:\users\kambiz\appdata\roaming\spotify\data\spotifywebhelper.exe" XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Backblaze "c:\program files (x86)\backblaze\bzbui.exe" -quiet XPS8300\kambiz HKU\S-1-5-21-3132194288-2979328837-1521389650-1003\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Sidebar %programfiles%\windows sidebar\sidebar.exe /autorun XPS8300\UpdatusUser HKU\S-1-5-21-3132194288-2979328837-1521389650-1015\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Dropbox dropbox.lnk WORKGROUP\kambiz Startup
GridMove gridmove.lnk WORKGROUP\kambiz Startup
OneNote 2010 Screen Clipper and Launcher onenote 2010 screen clipper and launcher.lnk WORKGROUP\kambiz Startup
test.ahk - Shortcut test.ahk - shortcut.lnk WORKGROUP\kambiz Startup
Speaking Clock Lite c:\program files (x86)\speaking clock\spclock.exe WORKGROUP\kambiz HKU\S-1-5-21-796427568-2867203097-2164592005-1116\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
AlwaysMouseWheel "c:\users\kambiz\appdata\local\temp\wz43dc\alwaysmousewheel.exe" -bg WORKGROUP\kambiz HKU\S-1-5-21-796427568-2867203097-2164592005-1116\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Spotify Web Helper "c:\users\kambiz\appdata\roaming\spotify\data\spotifywebhelper.exe" WORKGROUP\kambiz HKU\S-1-5-21-796427568-2867203097-2164592005-11... Read more

http://www.sevenforums.com/bsod-help-support/354785-bsod-multiple-times-per-day.html
Relevancy 64.5%

Hi

I am getting the BSOD multiple times a day, they seem to randomly occur and I am not sure of what is causing this. I have attached the dump file to be looked at.

Thanks

A:BSOD Multiple times in a day

Hiya and welcome to SevenForums!

Code:
BugCheck F4, {3, fffffa8007e98b10, fffffa8007e98df0, fffff80003389e20}

Probably caused by : wininit.exe
This is an 0xF4. This could mean that there's a virus, a failing harddrive, failing RAM stick/s. Run SeaTools(DO NOT RUN FOR SSDS) SeaTools for DOS and Windows - How to Use Also run MemTest86+ for 8 passes. It must be MemTest86+. RAM - Test with Memtest86+ Scan your computer for viruses using Malwarebytes. Malwarebytes Anti-Malware Free

http://www.sevenforums.com/bsod-help-support/377967-bsod-multiple-times-day.html
Relevancy 64.5%

Hello, I am getting BSOD multiple times during a day for last 2 weeks, especially when i start my pc. I was using Windows 8.1 x64 when this problem started. Today I did format my drive and installed Windows 7 Ultimate x64. BSOD is still happening.

I converted my dumpfile to logfile using this method. If i did something wrong or you need something different please ask me and i will upload it.

PS: This dumpfile is 1 day old. Last time i get BSOD my pc froze during blue screen so i restarted my pc and there was no dumpfile.

Sorry for my bad English. Thanks.

Attachment 301299

A:BSOD multiple times during day

Files from SF Diagnostic Tool
Attachment 301305

http://www.sevenforums.com/bsod-help-support/318103-bsod-multiple-times-during-day.html
Relevancy 64.5%

My custom built machine is about 9 months old. For the last 3 months or so it has been crashing multiple times per day (usually 1-2 per day). It doesn't usually crash for atleast 3-4 hours after the reboot. I can't find any thing to make it crash on demand and don't notice myself doing the same time each time it crashes. It seems pretty random.

I am running Windows 7 Ultimate 64bit. It is the full retail version and was the first OS installed on this hard drive.

I have attached the results of the BSOD Dump & System File Collection app and the system health alert.

Please let me know if you require additional information. Thanks!

A:BSOD multiple times per day

Hi.

Never dont use more than one system security in the same pc!

Remove Norton\symantec.

Remove PC Tools Security.

Remove LavasoftAd-Aware.

I dont know if i missed anything

Remove all antivirus and security suites.

They mess up your system.

Download,install and use only Microsoft Security Essentials with windows firewall.
Dont install anything else for the moment!!
Finish with these steps and post back.

http://www.sevenforums.com/bsod-help-support/200375-bsod-multiple-times-per-day.html
Relevancy 64.5%

Hello,

I bought my laptop less than a month ago and am dealing with multiple BSOD a day. Please help me manage this.

LOOKINGGLASS-Sat_04_04_2015_103216_86.zip

A:BSOD multiple times a day

Remove all AV software and uninstall Asus bloatware.


Code:
ASMMAP64.sys Thu Jul 2 11:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY (also found in Asus systems)
http://www.carrona.org/drivers/driver.php?id=ASMMAP64.sys

atkwmiacpi64.sys Wed Sep 7 03:44:52 2011 (4E66CC94)
ATK WMIACPI Utility
http://www.carrona.org/drivers/driver.php?id=atkwmiacpi64.sys

AiCharger.sys Fri Sep 23 04:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AiCharger.sys

IntcDAud.sys Tue Jun 19 16:40:51 2012 (4FE08F73)
Intel Graphics Media Accelerator HD Driver
http://www.carrona.org/drivers/driver.php?id=IntcDAud.sys

kbfiltr.sys Thu Aug 2 05:22:22 2012 (5019F26E)

kbfiltr.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

iaStorA.sys Sun Sep 2 03:01:24 2012 (5042AFE4)
Intel RST (Rapid Storage Technology) driver
http://www.carrona.org/drivers/driver.php?id=iaStorA.sys

FileMonitor.sys Fri Mar 1 03:45:06 2013 (51301632)
Component of IObit
http://www.carrona.org/drivers/driver.php?id=FileMonitor.sys

AsHIDSwitch64.sys Tue Aug 6 11:27:43 2013 (5200C18F)
HID driver for ASUS Wireless Radio Control
http://www.carrona.org/drivers/driver.php?id=AsHIDSwitch64.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

AsusTP.sys Tue Sep 17 11:28:40 2013 (523820C8)
Asis transformer pad filter driver
http://www.carrona.org/drivers/driver.php?id=AsusTP.sys

UrlFilter.sys Mon Nov 18 10:22:40 2013 (5289DC60)

UrlFilter.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

regfilter.sys Tue Nov 19 05:39:54 2013 (528AEB9A)

regfilter.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

athwbx.sys Thu Dec 12 10:10:36 2013 (52A97D8C)
Qualcomm Atheros AR9485WB-EG Wireless Network Adapter (Version: 10.0.0.274 is the first one after the release of Win8.1) [br] [br] Although I do not recommend drivers from places other than the manufacturer's website - this is the exception to that rule. Please scan with an anti-virus before opening any file that you download from the internet. [br] [br] Also the driver for Qualcomm Atheros AR9002WB-1NG Wireless Network Adapter & likely others as well.
http://www.carrona.org/drivers/driver.php?id=athwbx.sys

SmartDefragDriver.sys Mon Dec 23 11:05:52 2013 (52B80B00)
Smart Defrag
http://www.carrona.org/drivers/driver.php?id=SmartDefragDriver.sys

iwdbus.sys Thu Mar 13 22:59:14 2014 (53222A32)
Intel WIDI Bus Enumerator driver[br]Related to Intel Widi - Wireless Display
http://www.carrona.org/drivers/driver.php?id=iwdbus.sys

igdkmd64.sys Wed Apr 23 22:26:24 2014 (535821F0)
Intel Graphics driver
http://www.carrona.org/drivers/driver.php?id=igdkmd64.sys

mfeapfk.sys Fri Jun 13 18:28:47 2014 (539B26BF)
McAfee
http://www.carrona.org/drivers/driver.php?id=mfeapfk.sys

cfwids.sys Fri Jun 13 18:30:46 2014 (539B2736)
McAfee
http://www.carrona.org/drivers/driver.php?id=cfwids.sys

mfencbdc.sys Wed Aug 20 17:01:10 2014 (53F4B836)
McAfee Event driver
http://www.carrona.org/drivers/driver.php?id=mfencbdc.sys

TeeDriverx64.sys Tue Sep 23 22:01:14 2014 (5421D18A)
Intel Management Engine Interface driver
http://www.carrona.org/drivers/driver.php?id=TeeDriverx64.sys

mfehidk.sys Thu Sep 25 00:26:25 2014 (54234511)
McAfee Host Intrusion Detection Link Driver
http://www.carrona.org/drivers/driver.php?id=mfehidk.sys

mfewfpk.sys Thu Sep 25 00:26:43 2014 (54234523)
McAfee
http://www.carrona.org/drivers/driver.php?id=mfewfpk.sys

mfeavfk.sys Thu Sep 25 00:27:42 2014 (5423455E)
McAfee Anti-Virus File System Fil... Read more

http://www.eightforums.com/bsod-crashes-debugging/64044-bsod-multiple-times-day.html
Relevancy 64.5%

Hi. Kind new here but something has come up for me. which annoys me a little bit. So for the past few months i would get a BSOD very randomly when i watch videos Then when I get a new graphics card which was 6 days ago it BSOD me 5 times with in the period so i don't know if it has to do with my new graphics card or something else.

The latest BSOD give me this

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF96000174283
BCP3: FFFFF88006C5E030
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

A:BSOD Multiple times

I was looking at the the things it seems to be a driver problem but not 100% sure

http://www.sevenforums.com/bsod-help-support/372331-bsod-multiple-times.html
Relevancy 64.5%

Hello there I've just reformatted my computer the mostly bi-annual reformat and things are running great I edit video with Adobe Premiere Pro when I try to preview the video in the editor after the computer has been on for a few hours I will almost ALWAYS get the BSoD I've no idea why or how I've tried looking at windbg and I found the culprit to be quot USBPORT SYS quot I'll attach my latest minidumps in RAR format as well as the LATEST minidump from windbg in code format NOTE I don't know what I'm doing BSoD multiple per times day. when it comes to these minidump things I've just read up on them today I'm not taking any quot evasive quot action BSoD multiple times per day. at this moment waiting for a pro to help me out if they can Hope I've attached BSoD multiple times per day. what you have needed and the likes EDIT Windows XP Home SP GB RAM Pentium GHz processor Code Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck D ae d ae d Probably caused BSoD multiple times per day. by USBPORT SYS USBPORT USBPORT CompleteTransfer Followup MachineOwner --------- kd gt analyze -v Bugcheck Analysis DRIVER IRQL NOT LESS OR EQUAL d An attempt was made to access a pageable or completely invalid address at an interrupt request level IRQL that is too high This is usually caused by drivers using improper addresses If kernel debugger is available get stack backtrace Arguments Arg ae d memory referenced Arg IRQL Arg value read operation write operation Arg ae d address which referenced memory Debugging Details ------------------ READ ADDRESS ae d CURRENT IRQL FAULTING IP ffffffffae d ae d CUSTOMER CRASH COUNT DEFAULT BUCKET ID DRIVER FAULT BUGCHECK STR xD PROCESS NAME System LAST CONTROL TRANSFER from e ff to ae d FAILED INSTRUCTION ADDRESS ffffffffae d ae d STACK TEXT WARNING Frame IP not in any known module Following frames may be wrong f abce e ff fac f af c c xae d f abce f f d fac c cc d f nt IopfCompleteRequest xa f abcee f fd df d f d USBPORT USBPORT CompleteTransfer x f abcf f e f d f e d f e USBPORT USBPORT DoneTransfer x f abcf f a d f e fc d f USBPORT USBPORT FlushDoneTransferList x c f abcf f b d f e fc d f USBPORT USBPORT DpcWorker x f abcfb f c d f c b USBPORT USBPORT IsrDpcWorker x f f abcfcc dcd d f c b USBPORT USBPORT IsrDpc x f abcff dc d f ab nt KiRetireDpcList x f abcff f ab nt KiDispatchInterrupt x b dc d f bb xf ab STACK COMMAND kb FOLLOWUP IP USBPORT USBPORT CompleteTransfer f f d a dd mov cl byte ptr ebp- h SYMBOL STACK INDEX SYMBOL NAME USBPORT USBPORT CompleteTransfer FOLLOWUP NAME MachineOwner MODULE NAME USBPORT IMAGE NAME USBPORT SYS DEBUG FLR IMAGE TIMESTAMP ce FAILURE BUCKET ID xD CODE AV BAD IP USBPORT USBPORT CompleteTransfer BUCKET ID xD CODE AV BAD IP USBPORT USBPORT CompleteTransfer Followup MachineOwner ---------

A:BSoD multiple times per day.

I would run System file Checker, put your XP disc in the tray, then open a command prompt (Start > Run > cmd.exe) at the prompt type sfc /scannow

http://www.techsupportforum.com/forums/f10/bsod-multiple-times-per-day-315902.html
Relevancy 64.5%

Hi, I would really be grateful for some help please as my computer is repeatedly crashing and sometimes freezing. I have scanned it with malwarebytes and also Kaspersky but no viruses are shown.
Really hope that you can help me as finding it difficult to work, not knowing when it is going to happen!
Thanks



OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, Intel64 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 8190 Mb
Graphics Card: NVIDIA GeForce GTX 470, 1280 Mb
Hard Drives: C: Total - 953866 MB, Free - 805627 MB; D: Total - 238472 MB, Free - 32723 MB; E: Total - 476937 MB, Free - 62833 MB; F: Total - 238371 MB, Free - 166083 MB;
Motherboard: ASUSTeK Computer INC., P5N32-E SLI PLUS
Antivirus: Kaspersky Internet Security, Updated and Enabled

BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002E68786
BCP3: FFFFF88009B8DBA0
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

A:BSOD Multiple Times Please Help!

Hi,

Please refer to the following and reply back accordingly with the required information - http://www.techsupportforum.com/foru...ta-452654.html

Regards,

Patrick

http://www.techsupportforum.com/forums/f299/bsod-multiple-times-please-help-811042.html
Relevancy 64.5%

Hi there,
I received a BSOD multiple Times and I don't know what cased it.
Can you please help me out?

A:BSOD Multiple Times

There is only one dump in your logs, that is showing a STOP 0x109 which denotes a Critical Structure Corruption.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a039d89d408697, b3b7465eefbec4f9, fffff8800336f640, 3}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
It's showing that there's corruption to the Global Descriptor Table which more than likely is down to a failing RAM module.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d89d408697, Reserved
Arg2: b3b7465eefbec4f9, Reserved
Arg3: fffff8800336f640, Failure type dependent information
Arg4: 0000000000000003, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+



   Note
Attachment 353131

Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.
Post back with the results.

http://www.sevenforums.com/bsod-help-support/364635-bsod-multiple-times.html
Relevancy 63.64%

Hello this is my first time posting in a forum such as this so please forgive me for any fault in etiquette My issue is that my laptop has been continuously crashing with BSOD errors ntoskrnl.exe, BSOD's by Multiple help! caused for seemingly no reason My original configuration was in windows and started experiencing repeated crashes after I received the laptop back from repairs Keep in mind it is only year old Multiple BSOD's caused by ntoskrnl.exe, help! though now out of warranty I wiped the OS and installed a fresh copy of Windows Ultimate ive been meaning to do this for a while and the errors were Multiple BSOD's caused by ntoskrnl.exe, help! all the encouragement i needed Despite installing all windows updates lenovo updates and checking all drivers these BSOD errors continue to occur I cant even begin to narrow down on the issue as i feel like ive experienced every error type there is The list is currently at UNEXPECTED KERNAL MODE TRAP PAGE FAULT IN NONPAGED AREA IRQL NOT LESS OR EQUAL DRIVER IRQL NOT LESS OR EQUAL SYSTEM THREAD EXCEPTION NOT HANDLED SYSTEM PTE MISUSE KMODE EXCEPTION NOT HANDLED i have included the dump information from bluescreenview and CPU-Z computer information for reference Please let me know if there is anything else i need to Multiple BSOD's caused by ntoskrnl.exe, help! provide Thank you for any help I am in dire need of assistance as i have an honors thesis to complete in a few weeks and my only other computer is a mac with a corrupted battery

A:Multiple BSOD's caused by ntoskrnl.exe, help!

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

http://www.sevenforums.com/bsod-help-support/348459-multiple-bsods-caused-ntoskrnl-exe-help.html
Relevancy 63.64%

Since I've installed my new graphics card I get allot more blue screens.
I attached the file with all my minidump files. Made with SF_Diagnostic Tool.
If someone could help me out I would greatly appreciate it.

If you need to know more about my system, I will try to reply to messages as soon as possible.

A:Multiple BSOD causes, mostly ntoskrnl.exe errors.

Multiple errors, but none of them are pointing to GPU directly.

Code:
BugCheck A, {10, 2, 0, fffff800034ac103}

Probably caused by : memory_corruption ( nt!MiReplenishPageSlist+73 )

Followup: MachineOwner
-------------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff80003485ebe, fffff8800b47b7f0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KeWaitForMultipleObjects+3e )

Followup: MachineOwner
--------------------------------------------------------------------------
BugCheck 1E, {0, 0, 0, 0}

Probably caused by : hardware ( USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+2e8 )

Followup: MachineOwner
--------------------------------------------------------------------------
BugCheck D1, {fffffa7f929efd8c, 2, 0, fffff88004355fd0}

Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_DecIoRequestCount+14 )

Followup: MachineOwner
---------
So the most consistent error is USBPORT .... and some additional info about it are:

DEVICEPNP DEVICE ID ERROR CODEUniversal Serial Bus (USB) Controller PCI\VEN_1B6F&DEV_7023&SUBSYS_50071458&REV_01\4&3694E160&0&00A9 The drivers for this device are not installed.Universal Serial Bus (USB) Controller PCI\VEN_1B6F&DEV_7023&SUBSYS_50071458&REV_01\4&C70CB9A&0&0048 The drivers for this device are not installed.
The best to do is a clean reinstall. But before doing that, make it sure that the hardware are working properly.

Test your RAM modules for possible errors; as the BSOD points to memory corruption, too.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark; as you have doubt.
Video Card - Stress Test with Furmark

Then, go for a Clean Reinstall - Factory OEM Windows 7, which works equally good for retail, too.

http://www.sevenforums.com/bsod-help-support/313311-multiple-bsod-causes-mostly-ntoskrnl-exe-errors.html
Relevancy 63.64%

Hey guys first time posting from ntoskrnl.exe, errors multiple BSOD here but I found a lot of good information in my BSOD research so figured I should go ahead and make a thread Computer is a few years old a home build running Windows Home Premium x Haven't really had too many problems other than the occasional BSOD or random restart but it's gotten a lot worse lately so I wanna get to the bottom of BSOD from ntoskrnl.exe, multiple errors it The two errors I've gotten are Memory Management and System Service Exception both seem to be linked to the ntoskrnl exe file I also ran the System File Checker and got the following error reported quot Cannot repair member file l quot kerberos dll quot of Microsoft-Windows-Security-Kerberos quot BSOD from ntoskrnl.exe, multiple errors Lastly I ran the windows memory diagnostic and it detected several hardware errors My conclusion from all this and what I've read so far is I will probably have to do at least one of three things A system restore to a couple weeks ago Repair the system OS with my Win disc Replace the RAM Wanted to post here before I try any of those though Whew ok sorry to be long winded but wanted to provide as much info as possible

A:BSOD from ntoskrnl.exe, multiple errors

Quote:
Lastly I ran the windows memory diagnostic and it detected several hardware errors.


This explains your issue, to further confirm that run a full RAM Test with Memtest86+
RAM - Test with Memtest86+

If errors are detected you should replace your RAM modules.

http://www.sevenforums.com/bsod-help-support/218107-bsod-ntoskrnl-exe-multiple-errors.html
Relevancy 63.64%

Hello everyone My computer seems to causing BSOD multiple ntoskrnl.exe be randomly crashing most of the time while I'm gaming or trying to use my Oculus Rift Sometimes it will crash almost immediately other times it will be hours or sometimes not at all I've tried somewhat troubleshooting the issue but I now ntoskrnl.exe causing multiple BSOD need your help to actually fix it I'm running Windows Pro ntoskrnl.exe causing multiple BSOD here's a little list of what I've already tried Done all Windows UpdatesUnistalled AvastRan Memtest for about passes i'm going to do a full tonight Tried using driver verifier but my system wouldn't even boot why I think its some random ntoskrnl.exe causing multiple BSOD driver issue Ran chkdisk on my ssdI've stress tested and monitored my gpu so its not overheating I built this desktop a little over a year ago and its really always had these random crashes Just recently started playing a bunch of Overwatch Beta and using my new Oculus Rift which is why now I really want to fix it Anyways let me know what else I can do or should try Thanks for any help Attached is the zip with the info

http://www.tenforums.com/bsod-crashes-debugging/49347-ntoskrnl-exe-causing-multiple-bsod.html
Relevancy 63.64%

On win 7 x64, on differents machines HP8100 SFF, DC7800SFF, I get randomly BSOD, all caused
by the file ntoskrnl.exe.
As attach the diagnostic results file on a HP8100.
I think it is a driver issue (old version? incompatible?)
Thanks for your analyse.

A:BSOD - multiple caused by ntoskrnl.exe

Code:
BugCheck 3B, {c0000005, fffff80002ad9e57, fffff880076dea10, 0}

Probably caused by : memory_corruption ( nt!MiPfnShareCountIsZero+77 )

Code:
Usual causes: System service, Device driver, graphics driver, memory

Code:
1: kd> !error 00000000c0000005
Error code: (NTSTATUS) 0xc0000005 (3221225477) - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
memory_corruption doesn't necessary mean that a RAM module is faulty, it can also point to a object which corrupted the RAM at the time of the crash, for instance a corrupted driver or program. Paging files and the CPU caches can also be causes.

Follow these steps -

Test for any corrupted drivers, by running Driver Verifier for least 24 hours, stop the test if a BSOD occurs before this time frame. Driver Verifier will place stress on the drivers within your system, which will cause corrupted drivers to crash and hopefully be pinpointed.Driver Verifier - Enable and Disable
More Help and Information with Driver Verifier - Using Driver Verifier to identify issues with Drivers

Memory:RAM - Test with Memtest86+
Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

http://www.sevenforums.com/bsod-help-support/279579-bsod-multiple-caused-ntoskrnl-exe.html
Relevancy 63.64%

Hello a month or so ago just couple of months after I bought a new PC pretty decent expensive for my country I started to experience a lot of BSODs only at the time I started any game or any video file Sometimes I could play for - hours or watch a video sometimes it crashes - minutes after I start a game It works fine while I keep browsing internet in Mozilla though First I thought my main drive - SSD crashed - we unplugged it and tried to work on my older HDDs which I kept from my old PC Same problem We re-installed Windows multiple caused ntoskrnl.exe by BSOD multiple times it kept showing the problem Usually it does not start right after some new action was taken - like If I change HDD and multiple BSOD caused by ntoskrnl.exe install a new windows here a day two maybe it works ok with no BSODs at all BlueScreenView shows mostly always cant recon a different result a problem with ntoskrnl exe Once I thought my memory was an issue but - circles of Memtest didn't show any problems at all I run the latest drivers for my graphics card nvidia geforce gtx ti and I don't know wheter my video card can cause the problem What I know is thats its definetely not the HDD or probably my memory so I can only think about motherboard or graphics card problems And to be clear at first my PC just got stuck in games and I had to reboot it sometimes graphics in games crashed like flashing or everything was very smooth blur sorry for my english and a week or two after it started to give me BSOD all the time in games videos I used Win driver verifier and as expected multiple BSOD caused by ntoskrnl.exe everything was clear I'm not good at technical side of the issue but getting a little bit desperate to find a solution I decided to ask for help from the pro's here are multiple BSOD caused by ntoskrnl.exe my dumps of BlueScreenView Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PFN LIST CORRUPT Bug Check Code x e Parameter Parameter eb ae Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff abece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft reg Windows reg Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Siz... Read more

https://social.technet.microsoft.com/Forums/en-US/4c1f66a5-899f-47b6-bea4-8a98576e1128/multiple-bsod-caused-by-ntoskrnlexe?forum=w7itproperf
Relevancy 63.64%

Please help. I have a ASUS G750JX Laptop and I am having multiple BSOD per day many I think due to ntoskrnl.exe+15c4e9 at least that is what I am seeing in BlueScreenView. But I am also seeing BSOD from ntoskrnl.exe+303100, ntoskrnl.exe+15ace9, hal.dll+669a and others. I have no idea how to interpret this. I have attached the zip file created with DM Log Collector.

I ran a memory test using memtest86 and found no issues with the memory. I am not overclocking. My idle CPU temp is around 46 C, motherboard temp 47 C, GFX card temp 39 C.

I have updated Norton and ran a scan and found nothing.

Asus is telling me to do a full restore which would result in loosing all my data and software installs so I would rather find the issue and fix it.

Any help is greatly appreciated.

A:Multiple BSOD ntoskrnl.exe+15c4e9 and others

These crashes mostly happen when coming out of a sleep or screen saver state but happen even though the computer is not coming out of sleep.

http://www.eightforums.com/bsod-crashes-debugging/58245-multiple-bsod-ntoskrnl-exe-15c4e9-others.html
Relevancy 63.64%

Hello a month or so ago just couple of months after I bought a new PC pretty decent expensive for my country I started to experience a lot of BSODs multiple by ntoskrnl.exe caused BSOD only at the time I started any game or any video file Sometimes I could play for - hours or watch a video multiple BSOD caused by ntoskrnl.exe sometimes it crashes - minutes after I start a game It works fine while I keep browsing internet in Mozilla though First I thought my main drive - SSD crashed - we unplugged it and tried multiple BSOD caused by ntoskrnl.exe to work on my older HDDs which I kept from my old PC Same problem We multiple BSOD caused by ntoskrnl.exe re-installed Windows multiple times it kept showing the problem Usually it does not start right after some new action was taken - like If I change HDD and install a new windows here a day two maybe it works ok with no BSODs at all BlueScreenView shows mostly always cant recon a different result a problem with ntoskrnl exe Once I thought my memory was an issue but - circles of Memtest didn't show any problems at all I run the latest drivers for my graphics card nvidia geforce gtx ti and I don't know wheter my video card can cause the problem What I know is thats its definetely not the HDD or probably my memory so I can only think about motherboard or graphics card problems And to be clear at first my PC just got stuck in games and I had to reboot it sometimes graphics in games crashed like flashing or everything was very smooth blur sorry for my english and a week or two after it started to give me BSOD all the time in games videos I used Win driver verifier and as expected everything was clear I'm not good at technical side of the issue but getting a little bit desperate to find a solution I decided to ask for help from the pro's here are my dumps of BlueScreenView Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff ece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PFN LIST CORRUPT Bug Check Code x e Parameter Parameter eb ae Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter Parameter Parameter Parameter fffff abece Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Crash Address ntoskrnl exe c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time B... Read more

A:multiple BSOD caused by ntoskrnl.exe

Minidumps have been created they are referenced in your copy/paste logs there.
Could you follow these.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/181184-multiple-bsod-caused-ntoskrnl-exe.html
Relevancy 63.64%

Computer crashed four times in a row with the same BSOD.

Not sure what to do.
Running Windows 7 Ultimate 64 bit.

A:Multiple BSOD ntoskrnl.exe+74ec0

The crash dumps are not pointing to anything precisely. But it is memory related. Not necessarily the physical RAM, it may be any driver too, passing bad info to the memory. Let us explore both the possibilities.

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/366728-multiple-bsod-ntoskrnl-exe-74ec0.html
Relevancy 63.64%

Hi, I have been having a lot of problems with my computer today and yesterday.

Initially my comp would just crash and i would have to power off to reboot. Now im getting BSODs instead, i have tried to work out the cause of these by myself but they all apear to be caused by different problems. I have looked at a lot of other BSOD threads and i have used verifier.exe which created one of the memdumps.

I seem to get them whilst playing games such as lol or fallout or watching youtube videos, but sometimes i have had them for no reason at startup. I have done a fair amount of virus and malware scanning just incase it was somthing like that but its most probably a driver?

i have uploaded the BSOD files,

thanks in advance.

A:Multiple BSOD - appears to be from ntoskrnl.exe - help please

Two issues

1-Dtsoftbus01.sys Driver verified and one of the issues
Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

when you're done you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

2-Symantec. Caused at least 2 of these.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/230578-multiple-bsod-appears-ntoskrnl-exe-help-please.html
Relevancy 63.64%

Hi, been trying to fix my computer on my own by reading other people error messages that are the similar to mine. Finally got fed up and figured it couldn't hurt to post my own. I have seen 0x0000007E, 0x0000001A, 0x0000001E. I have updated the mouse and keyboard drivers. I have updated the video card drivers but one part keeps failing (i think its the C++ cause i already have it). Uninstalled the nightly build of VLC cause I thought that was the cause at one point. Any information would be a great help.

Thanks.

A:BSOD multiple times with different errors

  
Quote: Originally Posted by TresNight


Hi, been trying to fix my computer on my own by reading other people error messages that are the similar to mine. Finally got fed up and figured it couldn't hurt to post my own. I have seen 0x0000007E, 0x0000001A, 0x0000001E. I have updated the mouse and keyboard drivers. I have updated the video card drivers but one part keeps failing (i think its the C++ cause i already have it). Uninstalled the nightly build of VLC cause I thought that was the cause at one point. Any information would be a great help.

Thanks.


Nothing direct but I am betting it is your Norton. I would remove and replace it with Microsoft Security essentials.

http://us.norton.com/support/kb/web_...080710133834EN

Virus, Spyware & Malware Protection | Microsoft Security Essentials

I would also run these two tests

These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/193618-bsod-multiple-times-different-errors.html
Relevancy 63.64%

Already crashed 2 times today in 30 minutes. The first time i was just browsing, the second time i was playing Skyrim. This happens randomly every day. Windows 7 x64

This is what what i got from my latest crash.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2068

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88005773AF0
BCP3: FFFFF880040E1638
BCP4: FFFFF880040E0EA0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

I dont know how to read dmp files so here they are. Hopefully someone can help me.

A:BSOD multiple times every day on a new build

  
Quote: Originally Posted by Kleivis


Already crashed 2 times today in 30 minutes. The first time i was just browsing, the second time i was playing Skyrim. This happens randomly every day. Windows 7 x64

This is what what i got from my latest crash.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 2068

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88005773AF0
BCP3: FFFFF880040E1638
BCP4: FFFFF880040E0EA0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

I dont know how to read dmp files so here they are. Hopefully someone can help me.





These crashes were caused by memory corruption. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable

http://www.sevenforums.com/bsod-help-support/199100-bsod-multiple-times-every-day-new-build.html
Relevancy 63.64%

Hey, I keep getting different BSOD's at random times. Sometimes every 10 min, and sometimes the pc can run for an hour or two. I have made a memtest check for 4 passes without any errors, and Crystaldisk says that my main disk is all good, and only thing on my secondary disk is Reallocated sectors count that is at 100 and crystaldisk says caution.

As additionally info, i cant get windows update to work.

I have attached additional info in the .zip file.

I hope that someone can help me, since i basically cant use the pc.

-Ridick2602

A:Random BSOD's at multiple times a day.

Hi Ridick2602 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Tue Jan 6 18:22:15.246 2015 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\010615-18109-01.dmp]

Windows 8 Kernel Version 9600 MP (4 procs) Free x64

Built by: 9600.17328.amd64fre.winblue_r3.140827-1500

System Uptime: 0 days 13:40:00.919

Probably caused by : GenuineIntel

BugCheck 124, {0, ffffe001f3be0028, b2000040, 800}
BugCheck Info: WHEA_UNCORRECTABLE_ERROR (124)

Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffe001f3be0028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b2000040, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000800, Low order 32-bits of the MCi_STATUS value.
BUGCHECK_STR: 0x124_GenuineIntel

PROCESS_NAME: explorer.exe

FAILURE_BUCKET_ID: 0x124_GenuineIntel_PROCESSOR_BUS

CPUID: "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz"

MaxSpeed: 2660

CurrentSpeed: 3760


Processor may be overclocked!
Expected Frequency: 2660
Actual Frequency: 3760
Overclock Ratio: 1.41353

BIOS Version 0802

BIOS Release Date 12/10/2008

Manufacturer System manufacturer

Product Name P5E64 WS EVOLUTION

??????????????????????????????????????????????????????????????????????????????????????``
**************************Mon Jan 5 19:21:55.665 2015 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\010515-19671-01.dmp]

Windows 8 Kernel Version 9600 MP (4 procs) Free x64

Built by: 9600.17328.amd64fre.winblue_r3.140827-1500

System Uptime: 0 days 0:42:18.356

*** WARNING: Unable to verify timestamp for PCIIDEX.SYS

*** ERROR: Module load completed but symbols could not be loaded for PCIIDEX.SYS

*** WARNING: Unable to verify timestamp for ataport.SYS

*** ERROR: Module load completed but symbols could not be loaded for ataport.SYS

Probably caused by : PCIIDEX.SYS ( PCIIDEX+1175 )

BugCheck A, {0, 2, 1, fffff802cbbc891c}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)

Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff802cbbc891c, address which referenced memory
BUGCHECK_STR: AV

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: AV_PCIIDEX+1175

CPUID: "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz"

MaxSpeed: 2660

CurrentSpeed: 3760


Processor may be overclocked!
Expected Frequency: 2660
Actual Frequency: 3760
Overclock Ratio: 1.41353

BIOS Version 0802

BIOS Release Date 12/10/2008

Manufacturer System manufacturer

Product Name P5E64 WS EVOLUTION

??????????????????????????????????????????????????????????????????????????????????????``
**************************Mon Jan 5 18:38:48.069 2015 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\010515-26468-01.dmp]

Windows 8 Kernel Version 9600 MP (4 procs) Free x64

Built by: 9600.17328.amd64fre.winblue_r3.140827-1500

System Uptime: 29 days 14:25:37.759

Probably caused by : ntkrnlmp.exe ( nt!KiInterruptSubDispatchNoLockNoEtw+3f )

BugCheck A, {9a9dc2d2584, d, 1, fffff803c156d57f}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)

Arguments:
Arg1: 000009a9dc2d2584, memory referenced
Arg2: 000000000000000d, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff... Read more

http://www.eightforums.com/bsod-crashes-debugging/59636-random-bsods-multiple-times-day.html
Relevancy 63.64%

wondering whats going on with this now

specs

amd athlon ii x3 2.9
windows 7 64 bit
ddr3 1333 mhz 3.5 GB

any help would be much appreciated

Relevancy 63.64%

Windows x Full retail version System hardware months old But problem has existed since its first week sometimes a times day. randomly, BSOD multiple OS installation is a day old but the same OS was previously installed and suffered the same issue Bsod's randomly in general when the computer is left idle for a few minutes but not exclusively as BSOD randomly, sometimes multiple times a day. it has been known to crash regularly while playing Middle-Earth Shadow of Mordor but extremely rarely in other games CPU Intel i k GPU Palit Nvidia GeForce GTX JetStream Mobo Gigabyte GA-Z X-Gaming PSU BSOD randomly, sometimes multiple times a day. Corsair Builder Series CXM W Modular PLUS Bronze Certified ATX EPS PSU Homebuild desktop As I've had this problem for a while I've BSOD randomly, sometimes multiple times a day. done some diagnostic tests already The RAM GB Corsair Vengeance mhz x GB and the Drives Samsung EVO SSD GB and WD Black TB both appear to be error free after multiple tests Also as far as I can tell have eliminated the GPU and the Wireless network adapter from list of suspects as I have run the PC without both installed and it still bsod'd Please help I'll run the carrona programs while I wait

A:BSOD randomly, sometimes multiple times a day.

Performed driver verifier and it did cause a blue screen. I've attached the minidump files it created.

http://www.techsupportforum.com/forums/f299/bsod-randomly-sometimes-multiple-times-a-day-1004218.html
Relevancy 63.64%

Hi All Been getting BSOD a hell of a lot lately I actually thought that it was a reg error initially I had assumed that I'd messed something up and had my OS re-installed only to find that the same thing is happening It doesn't seem to happen when I'm doing anything specific I'll just be happily emailing or browsing and then BANG BSOD I've looked at the mini dump files with Blue Screen viewer and per times multiple day BSOD happening the common factor is ntkrnlpa exe but from what I gather on these forums and elsewhere it probably isn't the cause more of a symptom Most of the system is under a year old my old motherboard fried last Oct so I replaced with the Biostar BSOD happening multiple times per day N S with a new AMD Athlon II X and a new video card GeForce GS MB PCiEx I ran Memtest for BSOD happening multiple times per day passes and had no errors I've been getting some video freezing up on some games so I thought it might be an issue with the video card I really need some advice though because I don't want to start just messing BSOD happening multiple times per day about blindly I've tried following what the BSOD Posting Instructions said but let me know if I missed anything Thanks in advance n

A:BSOD happening multiple times per day

Never forget the hardware!

One of the errors I was getting was 0X00000A and a bit of trawling the web suggested memory issues. Having done 9 passes with memtest I had thought it was OK. I opened the case and re-seated the memory and hey presto it started up fine and fingers crossed still going strong.

http://www.sevenforums.com/bsod-help-support/193572-bsod-happening-multiple-times-per-day.html
Relevancy 63.64%

Ever since I have bought this computer it has constantly crashed When I attempt to fix something for example re-seat the memory made sure there was plenty of cable slack etc The system will then seem stable for - days Then out of the blue the system will crash several times in a short time sometimes this period can be a few hours random times with different at multiple BSOD or a few days Even though it has constantly crashed in the BSOD at random times with multiple different hundreds of times I would say I have actually witnessed it less than times There was one time though the system had crashed BSOD at random times with multiple different rebooted and then even crashed again before I even had a chance to log in The file included is from the last months and it has files This appears to be a rather large number this is nothing compared to what it used to be like when I first purchased this system a year ago Specs HP Envy GB i - core Windows DirectX Graphics - Intel HD Graphics Antivirus - BSOD at random times with multiple different Symantec End Point Malware Protection - Spy bot Search and Destroy Heavy used applications GNS PhotoShop CS Thanks for any and all help Stephen Here is the attachment

A:BSOD at random times with multiple different

Most BSOD's were caused by Memory Corruption, ie. one of your Memory Stick might be bad. Please
download and run the memory test: Memtest86+ - Advanced Memory Diagnostic Tool
You'll need to run the test for at least 6 passes and it will take a while to complete unless the test fails earlier.

In addition, temporarily uninstall all anti virus programs since they are known to also cause the BSOD.

http://www.eightforums.com/bsod-crashes-debugging/39648-bsod-random-times-multiple-different.html
Relevancy 63.64%

Hi,

I haven't had an issue with my Windows 7 for a long time, but since last week, I am getting BSODs all over the place.

Mostly, I have noticed it happening with the browser (Chrome) on, and the blue screen shows "error writing to read only memory" several times.

Attached is the zip file from SF_Diagnostic_Tool.

Any help would be much appreciated.

Thanks,
Sameer

A:BSOD multiple times a day since the last week

Hello Sameer,

Norton contributes to BSOD. Please remove it for testing purpose.

Recommended antivirus program for Windows 7 based on stability compared to others:- Microsoft Security Essentials Download | Free Spyware Protection
Malwarebytes - The Free version
Good and Free system security combination.


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.


Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller
ESET online scanner: Free Online Virus Scanner | ESET
Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

NTIDrvr.sys Wed Mar 25 09:09:39 2009 (49C9A073)
NTI CD-ROM Filter Driver by NewTech Infosystems (likely a part of Acer Empowering Technology)
Driver Reference Table - NTIDrvr.sys

UBHelper.sys Mon Apr 27 14:48:19 2009 (49F57153)
NTI CD &DVD-Maker or NTI Backup NOW! or NTI CD-Maker by NewTech Infosystems (usually in Acer Empowering Technology)
Driver Reference Table - UBHelper.sys

GEARAspiWDM.sys Mon May 18 18:17:04 2009 (4A1151C0)
CD-ROM Class Filter Driver by Gear Software.[br]Also comes with iTunes
Driver Reference Table - GEARAspiWDM.sys

Rt64win7.sys Fri Jun 10 12:33:15 2011 (4DF1BAAB)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
Driver Reference Table - Rt64win7.sys

To perform a clean install of a driver, follow this tutorial:How to Clean Left Over Driver Files with Driver Sweeper
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows you to remove leftover registry:-Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems
Run Disk Check on your hard disk for file system errors and bad sectors on it:Disk Check
Post a screenshot of your Hard Drive(s) using Crystal Disk Info software:CrystalDiskInfo - Software - Crystal Dew World
Run a Hard Drive test:SeaTools for DOS and Windows - How to Use
Keep us posted.

BSOD BUGCHECK SUMMARY:

Code:
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Tue Apr 29 04:42:33.424 2014 (UTC + 6:00)
System Uptime: 0 days 0:09:49.126
BugCheck 18, {0, fffffa8007d565c0, 2, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+48de1 )
BUGCHECK_STR: 0x18
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Sun Apr 27 06:50:28.832 2014 (UTC + 6:00)
System Uptime: 0 days 10:10:23.533
BugCheck A, {49, 2, 0, fffff80002cd4d41}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!SwapContext+11 )
BUGCHECK_STR: 0xA
PROCESS_NAME: googletalk.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Sat Apr 26 04:28:34.471 2014 (UTC + 6:00)
System Uptime: 0 days 0:12:35.048
BugCheck 3B, {c0000005, fffff80002fbfe61, fffff880027f9a70, 0}
Probably caused by : ntkrnlmp.exe ( nt!ObpWaitForMultipleObjects+186 )
BUGCHECK_STR: 0x3B
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Fri Apr 25 17:43:57.501 2014 ... Read more

http://www.sevenforums.com/bsod-help-support/329981-bsod-multiple-times-day-since-last-week.html
Relevancy 63.64%

hi, sorry if i'm not posting right. i saw the sticky at the top of this forum that give guidelines for posting, however, the app you are supposed to download and wait for up to 10mins to create a report and a new folder doesnt work. i waited for an hour and got nothing but another bsod in that time.

i did run a sys health report and will attach that.

so i've been upgrading my computer a bit recently, new ram, new graphics card, new processor, new psu, new cooling fan.

i'm having frequent system reboots and BSODs. ive read a lot of this may be solved by installing new drivers or checking for updates, but i'm unfamiliar with all of that stuff or how to do it.

i just need some help as this is getting really annoying as frequent as it is.

A:bsod multiple times daily

Have you run it as administrator? Otherwise you can try this:





Quote:
Go to C:\Windows\Minidump and copy all of the dmp files to the desktop. Select all>right-click on one>Send to>New Compressed folder. Then attach the zip file to your next post by use of the paperclip icon in the advanced editor.

http://www.sevenforums.com/bsod-help-support/102087-bsod-multiple-times-daily.html
Relevancy 63.64%

I have been getting a couple of Blue Screen's Of Death lately and most of they have Multiple Times BAD_POOL_HEADER BSOD from been caused by BAD POOL HEADER although BSOD Multiple Times from BAD_POOL_HEADER one of them was due to DRIVER POWER STATE FAILURE I ran BlueScreenView from NirSoft and these were the outcomes of them ---------------------------------------------------------------------------------------------------------------------------------- - - dmp - - PM BAD POOL HEADER x d ffffd d b ae f c a a e d d ab ntoskrnl exe ntoskrnl exe f a x ntoskrnl exe f a C WINDOWS Minidump - - dmp - - PM ---------------------------------------------------------------------------------------------------------------------------------- - - dmp - - PM DRIVER POWER STATE FAILURE x f c ffffe e fffff c c ntoskrnl exe BSOD Multiple Times from BAD_POOL_HEADER ntoskrnl exe x ntoskrnl exe C WINDOWS Minidump - - dmp - - PM ---------------------------------------------------------------------------------------------------------------------------------- - - dmp - - AM BAD POOL HEADER x e ffffd a b a ede ac fd e afd sys afd sys b x ntoskrnl exe f a C WINDOWS Minidump - - dmp - - AM ---------------------------------------------------------------------------------------------------------------------------------- - - dmp - - PM BAD POOL HEADER x d ffffd db fa b a bd f c c da c a b ntoskrnl exe ntoskrnl exe f a x ntoskrnl exe f a C WINDOWS Minidump - - dmp - - PM ---------------------------------------------------------------------------------------------------------------------------------- - - dmp - - PM BAD POOL HEADER x d ffffd e b fffff e ae b d e b c dc tcpip sys tcpip sys b x ntoskrnl exe f a C WINDOWS Minidump - - dmp - - PM ---------------------------------------------------------------------------------------------------------------------------------- - - dmp - - PM x e hal dll hal dll b x ntoskrnl exe f a C WINDOWS Minidump - - dmp - - PM ---------------------------------------------------------------------------------------------------------------------------------- I have also attached the SFDebugFiles zipped folder with this thread Attachment Any help will really be appreciated Thank You -Ashpan

A:BSOD Multiple Times from BAD_POOL_HEADER

Please update driver highlighted in red and reset your clock speed to stock.

Code:
VMNET.SYS Mon Aug 10 14:04:50 2009 (4A800CE2)
VMware Virtual Network Driver
http://www.carrona.org/drivers/driver.php?id=VMNET.SYS

vmnetadapter.sys Mon Aug 10 14:04:53 2009 (4A800CE5)
VMware virtual network adapter driver
http://www.carrona.org/drivers/driver.php?id=vmnetadapter.sys

vmnetbridge.sys Mon Aug 10 14:05:58 2009 (4A800D26)
VMware bridge driver
http://www.carrona.org/drivers/driver.php?id=vmnetbridge.sys

vstor2-ws60.sys Thu Aug 19 22:28:39 2010 (4C6D93F7)
VMware Virtual Storage Volume Driver
http://www.carrona.org/drivers/driver.php?id=vstor2-ws60.sys

vmci.sys Thu Nov 11 20:11:58 2010 (4CDC3FFE)
VMware
http://www.carrona.org/drivers/driver.php?id=vmci.sys

hcmon.sys Thu Nov 11 20:44:25 2010 (4CDC4799)
VMware USB monitor
http://www.carrona.org/drivers/driver.php?id=hcmon.sys

vmnetuserif.sys Thu Nov 11 20:59:16 2010 (4CDC4B14)
VMware network application interface driver
http://www.carrona.org/drivers/driver.php?id=vmnetuserif.sys

VMkbd.sys Thu Nov 11 21:35:18 2010 (4CDC5386)
VMware keyboard filter driver
http://www.carrona.org/drivers/driver.php?id=VMkbd.sys

vmx86.sys Thu Nov 11 22:23:08 2010 (4CDC5EBC)
VMware Virtualization Driver
http://www.carrona.org/drivers/driver.php?id=vmx86.sys

TurboB.sys Tue Nov 30 00:02:31 2010 (4CF43107)
Intel Turbo Boost driver
http://www.carrona.org/drivers/driver.php?id=TurboB.sys

ETD.sys Fri Feb 24 11:09:51 2012 (4F4761EF)
ELAN PS/2 Port Smart Pad
http://www.carrona.org/drivers/driver.php?id=ETD.sys

PxHlpa64.sys Tue Apr 24 19:26:29 2012 (4F96E245)
Sonic CD/DVD driver (used by many different CD/DVD programs)
http://www.carrona.org/drivers/driver.php?id=PxHlpa64.sys

k57nd60a.sys Wed Jan 30 01:48:55 2013 (51086DF7)
Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver
http://www.carrona.org/drivers/driver.php?id=k57nd60a.sys

bScsiSDa.sys Thu Apr 11 01:00:39 2013 (5165EF17)
Broadcom SD 3.0 driver
http://www.carrona.org/drivers/driver.php?id=bScsiSDa.sys

TeeDriverx64.sys Mon Jun 10 23:37:50 2013 (51B6472E)
Intel Management Engine Interface driver
http://www.carrona.org/drivers/driver.php?id=TeeDriverx64.sys

SCDEmu.SYS Mon Jul 22 04:14:17 2013 (51EC9579)

SCDEmu.SYS - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

yllfok.sys Tue Aug 6 00:33:54 2013 (52002852)

yllfok.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

dump_storahci.sys Thu Aug 22 13:40:39 2013 (5215F8B7)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys

athrx.sys Mon Aug 26 06:22:03 2013 (521AD7EB)
Atheros network adapter driver
http://www.carrona.org/drivers/driver.php?id=athrx.sys

networx.sys Tue Nov 19 18:06:31 2013 (528B9A97)
NetWorx
http://www.carrona.org/drivers/driver.php?id=networx.sys

cpuz137_x64.sys Mon Feb 17 15:22:16 2014 (53021B18)
CPU Z Driver
http://www.carrona.org/drivers/driver.php?id=cpuz137_x64.sys

iwdbus.sys Thu Mar 13 22:59:14 2014 (53222A32)
Intel WIDI Bus Enumerator driver[br]Related to Intel Widi - Wireless Display
http://www.carrona.org/drivers/driver.php?id=iwdbus.sys

VBoxUSBMon.sys Fri May 16 14:01:15 2014 (5375FE0B)
VirtualBox USB driver
http://www.carrona.org/drivers/driver.php?id=VBoxUSBMon.sys

VBoxNetFlt.sys Fri May 16 14:01:15 2014 (5375FE0B)
VirtualBox network driver
http://www.carrona.org/drivers/driver.php?id=VBoxNetFlt.sys

VBoxNetAdp.sys Fri May 16 14:01:16 2014 (5375FE0C)
VirtualBox network driver
http://www.carrona.org/drivers/driver.php?id=VBoxNetAdp.sys

VBoxDrv.sys Fri May 16 14... Read more

http://www.eightforums.com/bsod-crashes-debugging/57578-bsod-multiple-times-bad_pool_header.html
Relevancy 63.64%

Sometimes my notebook restart suddenly and then BSOD kernel power event id 41 showed.

This incident happened repeatedly. Maybe 3 or 4 times until now.

Can u guys find any issue and resolve that issue ?

Any help would be appreciated. I've attached the DM Log ZIP below.THERYANTOSG-03_04_2015_212034_45.zip

A:BSOD Event ID 41. Multiple times.

Hi Clowthu & welcome to the forums ^_^,

I am extremely sorry for this much delay in responding to you. There are very few analysts for such problems and the ones over here are busy with life (I was busy for the whole week with university work <_< ).

Do you still require help with your problem? If yes, then kindly reply to this topic and I would be notified via email and shall respond within 48 hours.
-Pranav

http://www.eightforums.com/bsod-crashes-debugging/63993-bsod-event-id-41-multiple-times.html
Relevancy 63.64%

I started experiencing BSOD crashes with an error indicating IRQL_NOT_LESS_OR_EQUAL multiple times while trying to download a patch for Neverwinter Online. This occurs whether I am trying to access the game through Steam or Arc. The program/system identified was always netio.sys.
 
However, today, I experienced something different. I was doing some online banking and I received the BSOD. It happened so fast and unexpectedly that I didn’t see the error message but I did notice that it did not identify the program/system. This was the first time I got a BSOD when not in a game.
 
The only action I have taken was to check to see if my drivers were up to date and they were.

A:Experiencing BSOD multiple times

Do you have a Logitech mouse or key board?

http://www.bleepingcomputer.com/forums/t/528931/experiencing-bsod-multiple-times/
Relevancy 63.64%

Hello daily multiple BSOD times all I'll try to get all my stats out first -purchased a Compaq about years ago that was running VISTA -When Win came out I formatted BSOD multiple times daily hard drive and installed Windows -Have installed ALL critical updates One optional update has not played nicely with my wireless networking device -- made it keep uninstalling -- so I backed that one out BSOD will come when using chrome exe zune exe and also whenever a commercial comes on Hulu - Watch your favorites Anytime For free only when a commercial plays oddly though and others programs instances I haven't Identified probably I uninstalled Zune and re-downloaded to ensure that it was up to date installed the BSOD multiple times daily most BSOD multiple times daily recent Zune Win update as well Still BSOD happens just when running zune software -- the device isn't even plugged in BSOD with chrome exe happens infrequently but it has happened So I downloaded MemTest and ran for passes -- zero errors I tried to post my minidump dmp files here but the server said they were invalid They are available on SkyDrive here public uploads - Windows Live If anyone can view and or recommend more to fix I would appreciate it matt

A:BSOD multiple times daily

please read this instructions:

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/110537-bsod-multiple-times-daily.html
Relevancy 63.64%

Hello I've been having recurring BSODs for the past few days I've tried restoring my system twice to before they started occurring day a BSOD multiple times Recurring I've tried updating drivers and I'm still having the issue OS - Vista Windows - Windows Ultimate x -bit or x - x What was original installed OS on system - Windows Ultimate Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer - Installed by a family member who helped with building the system I assume it was purchased from a Recurring BSOD multiple times a day retailer Age of system hardware - year Age of OS installation - have you re-installed the OS - year CPU - Intel Core i - K GHz Quad Core Video Card - MSI Radeon HD GB MotherBoard - Asus P Z -V LK ATX LGA Power Supply - brand amp wattage - Corsair Professional W PLUS Gold Certified ATX V EPS V System Manufacturer - Home built computer Exact model number if laptop check label on bottom - Home built computer A lot of the minidump files that were generated in the past few days were lost when I did System Restore but I can provide the ones from today if they aren't included in the zip file I attached I would be extremely grateful for any help that you guys could offer especially if you can tell me whether this is a hardware problem or not Edit I tried running Driver Verifier with the exact settings mentioned in this post http www techsupportforum com forums f driver-verifier-windows- -windows- -and-vista-bsod-related- html and upon restarting my system I could log in and the desktop showed up for a couple of seconds before my entire system froze I let it sit there for a good hour hoping that it would BSOD so I could identify the problem but with no luck Upon restarting again the same thing happened I had to boot up in safe mode and use System Restore to fix the problem

A:Recurring BSOD multiple times a day

Hi,

We have two dumps from September, but prior to that it goes all the way back to January.

KMODE_EXCEPTION_NOT_HANDLED (1e)

This indicates that a kernel-mode program generated an exception which the error handler did not catch.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005

0xC0000005: STATUS_ACCESS_VIOLATION

A memory access violation occurred.

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.

A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high. This bug check is usually caused by drivers that have used improper addresses.


Code:

2: kd> kv
Child-SP RetAddr : Args to Child : Call Site
fffff880`05dce4c8 fffff800`030c5129 : 00000000`0000000a fffffa80`18d70610 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`05dce4d0 fffff800`030c3da0 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`0200000e : nt!KiBugCheckDispatch+0x69
fffff880`05dce610 fffff880`04593c90 : 00000000`0000000e fffffa80`08d70000 00000000`0000000e fffffa80`08d70cc0 : nt!KiPageFault+0x260 (TrapFrame @ fffff880`05dce610)
fffff880`05dce7a0 fffff880`045c5fe1 : fffffa80`08d70001 fffffa80`00000001 00000000`00000000 fffffa80`08d70000 : dxgmms1!VidSchiSendToExecutionQueue+0x790
fffff880`05dce8a0 fffff880`045c4eb8 : 00000000`00000002 00000000`007c0121 fffffa80`08d97ec0 fffffa80`082d8410 : dxgmms1!VidSchiSendToExecutionQueueWithWait+0x179
fffff880`05dce9a0 fffff880`045c4514 : fffff800`00b96000 fffff880`045c3f00 fffffa80`00000000 fffffa80`000006a0 : dxgmms1!VidSchiSubmitRenderCommand+0x920
fffff880`05dceb90 fffff880`045c4012 : 00000000`00016539 fffffa80`08b0e650 00000000`00000080 fffffa80`082d8410 : dxgmms1!VidSchiSubmitQueueCommand+0x50
fffff880`05dcebc0 fffff800`03363bae : 00000000`021ed06d fffffa80`08ceea00 fffffa80`066769e0 fffffa80`08ceea00 : dxgmms1!VidSchiWorkerThread+0xd6
fffff880`05dcec00 fffff800`030b68c6 : fffff800`03240e80 fffffa80`08ceea00 fffff800`0324ecc0 47334642`6a33794e : nt!PspSystemThreadStartup+0x5a
fffff880`05dcec40 00000000`00000000 : fffff880`05dcf000 fffff880`05dc9000 fffff880`05dce540 00000000`00000000 : nt!KiStartSystemThread+0x16
dxgmms1.sys culprits (DirectX MMS). Could imply memory failure, video card driver issues, or video card failure.

Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.

Memtest86+:

Download Memtest86+ here:

Memtest86+ - Advanced Memory Diagnostic Tool

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory... Read more

http://www.techsupportforum.com/forums/f299/recurring-bsod-multiple-times-a-day-719481.html
Relevancy 63.64%

Operating System: Windows 7 Ultimate 64-Bit (6.1, Build 7601)
System Model: MS-7353
Processor: Intel(R) Core(TM) 2 Quad CPU Q8200 @ 2.33GHz (4CPUs), ~2.3GHz
Memory: 4096MB RAM

Display:

Chip Type: GeForce 9800 GT
DAC Type: Integrated RAMDAC
Approx. Total Memory: 2287 MB
Current Display Mode: 1920 x 1080(32 bit) 60Hz

-----------------------------------------------------------------

Display Drivers Up to date as of 10/15/2011

-----------------------------------------------------------------

This computer was built by me in March of 2010 and worked fine up until about November 2010. It started out having the same BSOD error about once a week and once i moved back home less than a month ago it has been having the problem pretty much everyday at least once. I am usually playing music (VIA Itunes) or surfing the internet.

I just updated the video drivers today as they have been old since I built the computer.

Any help is welcomed and appreciated.

A:BSOD Random Multiple Times A Day

You uploaded the data collection app instead of the data.

Please try this method instead.
We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

It is almost impossible to spot trends from a single DMP file so if you have m ore than one please upload them. If you only have one please wait until the computer crashes again then upload both.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/198387-bsod-random-multiple-times-day.html
Relevancy 63.64%

So I've been looking into this issue for a while now, about 2 or 3 weeks I'd say. the BSOD's weren't as frequent as they are now, they used to be only about maybe once every three days or so, and now there 2-3 times a day. It's really frustrating, so now I'm coming on here to see if someone can hopefully help me, since it's becoming so unbearable. All of my pc specs are on my profile, but the main ones are: i7-4770k, Z87 Asus sabertooth motherboard, 16gb of G.Skill Z 2400 mhz ram. I'd appreciate any sort of help, I don't think it's my drivers, because I've done fresh installs of Windows 8.1 now about 4 times and every single time it's the same, 2 or 3 BSOD's per day. Thanks in advance!

A:Random BSOD Multiple times a day

Hi,
I am extremely sorry that this thread was not attended to. There are not many people in this field
In case you still require help, kindly respond to this thread and I will be notified via email and you should expect a response from me in 48 hours.
Regards,
Pranav

http://www.eightforums.com/bsod-crashes-debugging/67141-random-bsod-multiple-times-day.html
Relevancy 63.64%

Hello ! In the past 2 months I have been getting BSOD SYSTEM_SERVICE_EXCEPTION on different occasions.I have this computer for 2 years.At first I would get the error rarely but lately the problem seems to occur often.It seems to occur when using different programs.Today I got it 3 times when using fruity loops.The program would freeze while i was working on my music(not every time),and while trying to close it BSOD pops up.This didn't happen only when I was using fruity loops.Sorry if my English is bad,it's not my native language.

Windows 7 Ultimate x64 full retail
hardware age - 2 years
OS - reinstalled it today

I included the kernel memory dump and system health report in the attachment.If any additional information is required please tell me.
Please help,and thank you in advance.

A:BSOD SYSTEM_SERVICE_EXCEPTION multiple times

  
Quote: Originally Posted by bizzysgs


Hello ! In the past 2 months I have been getting BSOD SYSTEM_SERVICE_EXCEPTION on different occasions.I have this computer for 2 years.At first I would get the error rarely but lately the problem seems to occur often.It seems to occur when using different programs.Today I got it 3 times when using fruity loops.The program would freeze while i was working on my music(not every time),and while trying to close it BSOD pops up.This didn't happen only when I was using fruity loops.Sorry if my English is bad,it's not my native language.

Windows 7 Ultimate x64 full retail
hardware age - 2 years
OS - reinstalled it today

I included the kernel memory dump and system health report in the attachment.If any additional information is required please tell me.
Please help,and thank you in advance.


Related to emusba10.sys USB-Audio 1.0 Driver from E-MU Systems. I would update with newest.

http://www.sevenforums.com/bsod-help-support/207432-bsod-system_service_exception-multiple-times.html
Relevancy 63.64%

i just finished building my own custom desktop today and i had installed windows bit home while doing windows updates i kept on getting several different BSOD's - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff caf fffff ddb Ntfs sys Ntfs sys f x ntoskrnl exe c C Windows Minidump - - dmp - - dmp PM MEMORY MANAGEMENT x a fffffa ce f fffff d fffff a be e ntoskrnl exe ntoskrnl exe c NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win gdr - x ntoskrnl exe c C Windows Minidump - - dmp - - dmp PM times computer on new BSOD multiple MEMORY MANAGEMENT x a fffff f a fffff a fffff a Ntfs sys Ntfs sys cd x ntoskrnl exe c C Windows Minidump - - dmp - - dmp PM SYSTEM THREAD EXCEPTION NOT HANDLED x e ffffffff c fffff e f fffff fa a fffff fa b ntoskrnl exe ntoskrnl exe f NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win gdr - x ntoskrnl exe f C Windows Minidump - - dmp - - dmp PM BAD POOL HEADER x fffff c b fffff c fffff c b win k sys win k sys b d x ntoskrnl exe f C Windows Minidump - - dmp

A:BSOD multiple times on new computer

Hi,

In order for the BSOD crew to be able to help you, please follow the recommendations in this thread:

http://www.sevenforums.com/crashes-d...tructions.html

Regards,
Golden

http://www.sevenforums.com/bsod-help-support/214957-bsod-multiple-times-new-computer.html
Relevancy 63.64%

I started experiencing BSOD crashes with an error indicating IRQL_NOT_LESS_OR_EQUAL multiple times while trying to download a patch for Neverwinter Online. This occurs whether I am trying to access the game through Steam or Arc. The program/system identified was always netio.sys.
 
However, today, I experienced something different. I was doing some online banking and I received the BSOD. It happened so fast and unexpectedly that I didn’t see the error message but I did notice that it did not identify the program/system. This was the first time I got a BSOD when not in a game.
 
The only action I have taken was to check to see if my drivers were up to date and they were.

A:Experiencing BSOD multiple times

Please close this. I moved this to Windows 7 forum.

http://www.bleepingcomputer.com/forums/t/528924/experiencing-bsod-multiple-times/
Relevancy 63.64%

Hey guys, I am here because I cannot find a solution to my annoying problem with Win7.
I have a new machine that came with Vista which I quickly upgraded to Win7 Ultimate 64bit.

My problem is that multiple times during the day I have random BSOD's that make my computer restart and are just an all around pain. (No damage seems to be done to the machine.)

The BSOD's happen during many random times, including while the machine is idle and I am not attending to it, while a browser is open to email, and while I am downloading software. (Most happen during idle periods.)

Here is the picture of the explanation I am given in SafeMode:
Thanks for any help given.

A:BSOD randomly multiple times a day

Krumlov, welcome to the forums
Pls take a look here for collecting and providing info about crashes. I think more will be needed rather than that screen
Tks

http://www.sevenforums.com/bsod-help-support/45730-bsod-randomly-multiple-times-day.html
Relevancy 63.64%

I had run Verifier and it crashes. However, no dump files are recorded. Anyone can help with this?

Relevancy 63.64%

Is Windows 7 . . .
- x86 (32-bit) or x64 ? Win7 x64
- the original installed OS on the system? Yes
- an OEM or full retail version? Full retail version
- What is the age of system (hardware)? 1 year
- What is the age of OS installation (have you re-installed the OS?) I have re-installed the OS and same BSOD still occurs.


This definitely seems to be a hardware problem, but I can't seem to pinpoint it. I have changed out my video card, sound card, and memory chips, but the problem still persist. I've also checked my temps and they all seem to be in normal ranges. All drivers and Bios are up to date.

Here are my system specs, and I am not overclocked...

Intel I7 980x @ 3.33GHz
Asus Rampage III Extreme
6 Gigs Muskin Redline
EVGA GTX 480
Sound Blaster X-Fi
Intel x25-m 80gig SSD
1.5TB SATA 3.0GB/s HD
Windows 7 64-Bit

Thanks in advance!!!

A:Getting random BSOD multiple times a day! Please help!!!

  
Quote: Originally Posted by teknic111


Is Windows 7 . . .
- x86 (32-bit) or x64 ? Win7 x64
- the original installed OS on the system? Yes
- an OEM or full retail version? Full retail version
- What is the age of system (hardware)? 1 year
- What is the age of OS installation (have you re-installed the OS?) I have re-installed the OS and same BSOD still occurs.
This definitely seems to be a hardware problem, but I can't seem to pinpoint it. I have change out my video card, sound card, and memory chips, but the problem still persist. I've also checked my temps and they all seem to be in normal ranges. All drivers and Bios are up to date.

Here are my system specs, and I am not overclocked...

Intel I7 980x @ 3.33GHz
Asus Rampage III Extreme
6 Gigs Muskin Redline
EVGA GTX 480
Sound Blaster X-Fi
Intel x25-m 80gig SSD
1.5TB SATA 3.0GB/s HD
Windows 7 64-Bit

Thanks in advance!!!


All of these are virtually identical and point to hardware. I have a hunch this is the real problem

1-ASACPI.SYS a major cause of BSOD's in the 2005 rev.

The pre 2009 version of this driver is a known BSOD cause.

The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE http://support.asus.com/download/dow...ge=en-us&os=30
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).
and if not

Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

http://www.sevenforums.com/bsod-help-support/163593-getting-random-bsod-multiple-times-day-please-help.html
Relevancy 63.64%

Hi - I keep getting the dreaded BSOD multiple times a day. There is no one particular thing I am doing at the time it happens - so I havent seen any pattern (not that there isnt one I havent noticed!). Thanks in advance for any help you might have for me!

A:BSOD multiple times of day, no pattern

Hello and welcome to SF carrieaj .

0x9F which is DRIVER POWER STATE FAILURE that happens in
transitions between power states most commonly S0 (ON state) > S3 (Sleep state)
or vice-verse. You can read more HERE.

The most common cause is a device driver but sometimes it's the hardware itself
that is at fault.

The bugchecks appears to be caused by the Ethernet adapter when it is trying to power down.

Code:
BugCheck 9F, {3, fffffa8007abaa10, fffff80000b9c518, fffffa800e480010}

FAILURE_BUCKET_ID: X64_0x9F_3_POWER_DOWN_netr28x_IMAGE_pci.sys

!irp fffffa800e480010

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa800ab67050 00000000 00000000-00000000
\Driver\netr28x
The thing that is puzzling me a little bit is the driver date,

Code:
lmvm netr28x
Browse full module list
start end module name
fffff880`04cdf000 fffff880`04f36000 netr28x T (no symbols)
Loaded symbol image file: netr28x.sys
Image path: \SystemRoot\system32\DRIVERS\netr28x.sys
Image name: netr28x.sys
Browse all global symbols functions data
Timestamp: Fri Feb 22 11:10:29 2013
The latest I found offered both on LinkSys and MediaTek's website are dated 2012,
where did you get yours from?
Driver Reference Table - netr28x.sys

Please follow both of these tutorials and select to turn off the power management:
USB Selective Suspend - Turn On or Off
PCIe Link State Power Management - Turn On or Off in Windows
Please remove iaStor:

Code:
lmvm iaStor
Browse full module list
start end module name
fffff880`010e2000 fffff880`012ea000 iaStor T (no symbols)
Loaded symbol image file: iaStor.sys
Image path: \SystemRoot\system32\DRIVERS\iaStor.sys
Image name: iaStor.sys
Browse all global symbols functions data
Timestamp: Fri Oct 02 22:58:50 2009
Driver Reference Table - iaStor.sys







  
Quote: Originally Posted by Arc


Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features.
Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.



Please remove GFI Sunbelt Software Firewall:

Code:
lmvm SBFWIM
Browse full module list
start end module name
fffff880`04c59000 fffff880`04c7a000 SBFWIM T (no symbols)
Loaded symbol image file: SBFWIM.sys
Image path: \SystemRoot\system32\DRIVERS\SBFWIM.sys
Image name: SBFWIM.sys
Browse all global symbols functions data
Timestamp: Thu Sep 22 12:11:58 2011
Driver Reference Table - sbfwim.sys
Post back with the results.

http://www.sevenforums.com/bsod-help-support/317943-bsod-multiple-times-day-no-pattern.html
Relevancy 63.64%

so i built this pc about a month ago and for like - days ive noticed that my pc was really slow during the startup but today its slow pretty much all the time but on startup its still the worst Today is the first time i got a blue screen i couldnt check the error message since it went by too fast but since then i crashed other times and the rd multiple and PC new times slow really BSOD one i saw something about the memory new PC really slow and BSOD multiple times here are my specs MSI ti with the latest WHQL drivers i k g skill ripjaws X gb ddr MHz Asus p z -v lk motherboard with the latest bios installed today corsair TX PSU samsung spinpoint F tb hard drive i also have another gb hdd to record and new PC really slow and BSOD multiple times a external tb hdd for backups Speccy says my ram is running around MHz instead of MHz even when i manually change it in the bios so heres everything i did - i ran memtest no problems detected - flashing the bios to the newest new PC really slow and BSOD multiple times version changed nothing - i ran a full scan with malwarebytes detected nothing - i ran an hard drive benchmark with Dxtory speed is normal idk of any other program with a hard drive benchmark - i cleaned with ccleaner changed nothing - i changed my performance settings in the bios by the default overclock note temperatures were always stable to the default quot normal quot mode changed nothing steam takes ages to load malwarebytes was randomly freezing for like - mins then resuming the scan my pc sometimes freezes during secs every - secs during like - mins videos on youtube are very buggy and there re other things that i forgot in my opinion i think the problem is with my ram i have gb sticks and after posting this i will try booting my pc with only to see if it changes anything I never formatted this hard drive my dxdiag log is in the attachments

A:new PC really slow and BSOD multiple times

when i tried with the first ram stick, i got an error pop up and it restarted. i turned the pc off and tried with the 2nd stick, i got this message telling me they couldnt read the files on my hdd so i think it converted them.

results: firefox is completly broken, i uninstalled it, but it wont let me download it from ANY website. i tried downloading something else and it worked so it seems the problem is only with firefox.

i also forgot to say: on the boot up, my desktop is normal, but then my task bar and everything changes from the transparent theme to the ram-saving theme and after a few minutes it comes back to the transparent theme

edit: i just tried running speccy, and it seems it is broken too since for the cpu, ram, motherboard, graphics and hard drives, it tells me "cannot load SPC DLL". i cant redownload it either

edit2: i tried download with internet explorer and it gave me this error... "the structure of the disc is unreadable"

*** am i supposed to do now? im getting pretty depressed. ive been trying to fix it for the whole day now...

http://www.techsupportforum.com/forums/f299/new-pc-really-slow-and-bsod-multiple-times-667903.html
Relevancy 63.64%

Hi, i have several surfaces Pro 3 that i have Imaged with Sccm. They Randomly reboot Since i have changed them from never going to sleep. Usually when not in use is when they BSOD. From my novice attempts to reed the dump logs it looks like the wificlass.sys

We do have "Cisco 1142 access points" but unlike this artical the version they suggest does not resolve the problem. for ether the Cisco devices or the wireless driver mentioned on page 15.

http://answers.microsoft.com/en-us/surface/forum/surfpro3-surfnetwork/surface-pro-3-blue-screen-due-to-wifi/af642571-cd20-41ea-80b3-f2052511b65c?page=1&tm=1435061108537

ISSFTC-2-Tue_06_23_2015__55623_29.zip

A:Surface Pro 3 BSOD Multiple times a day

Hi,
I am extremely sorry that this thread was not attended to. There are not many people in this field.
In case you still require help, kindly respond to this thread and I will be notified via email and you should expect a response from me in 48 hours.
Regards,
Pranav

http://www.eightforums.com/bsod-crashes-debugging/67687-surface-pro-3-bsod-multiple-times-day.html
Relevancy 63.64%

Hello I've tried to go into as much detail as I can below I'm not sure on almost day.. times everyday, sometimes multiple a BSOD some specs and the age of my system sorry BSOD A few months ago I started getting a BSOD everytime I tried to connect an external monitor to my laptop I don't know what the actual error message was as I stopped using an external monitor and completely forgot about it until this forum reminded me I do recall it started happening after installing some windows updates Sorry I can't be anymore detailed than that BSOD Recently I started getting multiple BUGCODE USB DRIVER BSOD's whilst cleaning my laptop for malware etc BSOD almost everyday, sometimes multiple times a day.. I don't know if it was a coincidence that they started happening at that time but I never had them prior to running any of the scans in the Virus Trojan Spyware forum I have finished cleaning up the malware now thanks to the help of the other forum and there doesn't appear to be any remaining malware left on my laptop My built in webcam kept crashing not too long ago it's been on the blink for a while but i've never really used it I disabled it but I've bluescreened since with the same error It's listed as a USB device so I wonder if that could have something to do with it BSOD DRIVER IRQL I didn't catch the rest it only happened once at the same time I started getting the bugcode BSODs I haven't had one since OS - Vista Windows - Windows x -bit or x -x What was original installed OS on system -Windows Is the OS an OEM version came pre-installed on system or full retail version YOU purchased it from retailer -came pre-installed on system Age of system hardware -Not sure Age of OS installation - have you re-installed the OS -Not sure again -Haven't re-installed the OS CPU Intel R Core TM i CPU M GHz Video Card MotherBoard Power Supply - brand amp wattage -Not sure on any of these System Manufacturer -ASUS Exact model number if laptop check label on bottom -K F-SX V

A:BSOD almost everyday, sometimes multiple times a day..

Hello,


Try checking the ASUS Support site for an update for the Elantech touchpad.

Try with an external mouse connected disabling the touchpad to see if you still get the BSOD's


Code:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
Machine Name:
Kernel base = 0xfffff800`02c4a000 PsLoadedModuleList = 0xfffff800`02e8e670
Debug session time: Sun Apr 7 13:46:38.881 2013 (UTC - 4:00)
System Uptime: 0 days 0:56:00.267
Loading Kernel Symbols
...............................................................
................................................................
..........................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffffa8605f27260, 2, 0, fffff88004c2cbc5}

*** WARNING: Unable to verify timestamp for ETD.sys
*** ERROR: Module load completed but symbols could not be loaded for ETD.sys
Probably caused by : ETD.sys ( ETD+ebc5 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffffa8605f27260, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004c2cbc5, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ef8100
GetUlongFromAddress: unable to read from fffff80002ef81c0
fffffa8605f27260 Nonpaged pool

CURRENT_IRQL: 2

FAULTING_IP:
ETD+ebc5
fffff880`04c2cbc5 408ab44bec000000 mov sil,byte ptr [rbx+rcx*2+0ECh]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xD1

PROCESS_NAME: System

TRAP_FRAME: fffff88002f8b980 -- (.trap 0xfffff88002f8b980)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=00000000ffffffff rbx=0000000000000000 rcx=00000002fffffffa
rdx=fffffa8006aa3010 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88004c2cbc5 rsp=fffff88002f8bb10 rbp=fffffa8006aa3010
r8=00000000fffffffe r9=fffff88002f8bcd8 r10=0000000000000000
r11=fffffa8005e46dc0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
ETD+0xebc5:
fffff880`04c2cbc5 408ab44bec000000 mov sil,byte ptr [rbx+rcx*2+0ECh] ds:00000006`000000e0=??
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002cbf1e9 to fffff80002cbfc40

STACK_TEXT:
fffff880`02f8b838 fffff800`02cbf1e9 : 00000000`0000000a fffffa86`05f27260 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`02f8b840 fffff800`02cbde60 : fffffa80`05ea2270 fffff880`04c0c360 00000000`0000001a fffffa80`05f27180 : nt!KiBugCheckDispatch... Read more

http://www.techsupportforum.com/forums/f299/bsod-almost-everyday-sometimes-multiple-times-a-day-692663.html
Relevancy 63.21%

I've been having random BSOD and although I suspect the Logitech USB mic is part of it, it seems to happen out of nowhere with bug codes like 0x00000019, 0x000000a, 0x0000018, and 0x000001e. It can happy a few times a day and it's getting really frustrating trying to figure this out. I am sure I updated all of my drivers, and I was wondering if anyone could help pinpoint exactly what is really causing it.

A:BSOD with ntoskrnl. Multiple codes but same source

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {28, 2, 0, fffff800032d6cd0}

Probably caused by : memory_corruption ( nt!MiFindNodeOrParent+0 )

Followup: MachineOwner
---------
Lets check RAM first. Run a minimum of 8 consecutive passes, preferably overnight, or until errors occur using MemTest86+.

Reference:
RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/366996-bsod-ntoskrnl-multiple-codes-but-same-source.html
Relevancy 63.21%

Hello I must admit I'm completely almost always BSOD, by multiple caused ntoskrnl.exe+7cc40 lost by now and need help The problem is I have this notebookl HP multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 G -b SA Notebook PC Product Specifications HP G -b SA Notebook PC - HP Customer Care United States - English HP G -b SA and I'm getting random BSODs at completely random times Usually is happens after cold start I think I've tried everything hardware-related Memtest h test is ok hdd seems ok too SMART and HDtune machina was in servise center and they replaced mainboard But BSODs are still bumping up I'm running W Home Premium retail multiple BSOD, almost always caused by ntoskrnl.exe+7cc40 version hdd was wiped clean few moths ago so there are no HP quot goodies quot left From what I was able to find it seems like some sort of driver-memory related problem but right now I have no idea what to look for Also service center says in short quot hardware ok must be something in software you are using quot

A:multiple BSOD, almost always caused by ntoskrnl.exe+7cc40

I do not see any really questionable software. K-Lite could cause problems if it was corrupted; codec packages are somewhat worrisome when they get corrupted. Other than that, nothing out of the ordinary.

I did see an out of date driver: netr28x.sys which is your Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer). Download the updated driver from the HP Support site, and use the following steps to re-install the update:

First, download the latest driver. Then do the next steps.
Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.

Alternatively:Login as an adminstrative user.
First, download the latest driver. Then do the next steps.
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.
Also, some of your crashes are indicating hard disk related problems. It may just be hard disk corruption, or maybe your hard disk was disconnected during transit.

The first thing to check is whether the hard disk is physically connected to the motherboard properly. To do so:Shut down and turn off the computer
Remove the AC Adapter
Remove the battery
Hold down the power button for 15-30 seconds to close the circuit and drain any residual power
Remove the panel on the underside of the laptop where the hard disk is housed
Remove and re-insert the hard disk by sliding it away from the connector and then gently but firmly pressing it back into the connector (no screws should need to be removed to do this step)
Replace the panel on the underside of the laptop to cover the hard disk
Replace the battery
Replace the AC Adapter
Turn on the computer and see how it responds
Post back once these steps have been implemented whether the system is stable. Sometimes these crashes can occur due to a loose connection.
Then run Disk Check with Automatically fix file system errors checked.

http://www.sevenforums.com/bsod-help-support/236905-multiple-bsod-almost-always-caused-ntoskrnl-exe-7cc40.html
Relevancy 63.21%

Dear All I am using Toshiba Satellite L d-S Home premium x bit SP laptop for my routine use On thAug i had my first BSOD - x f I was working on Andorid ROM which i downloaded for my mobile After completing the download i went out for an hour or so with my mobile connected with by - Multiple help Caused BSOD ntoskrnl.exe..please driver my laptop After coming back i saw blue screen which mentioned about this error Its now occurring Multiple BSOD - Caused by driver ntoskrnl.exe..please help every time i start up my laptop I found out the error which is caused by driver - ntoskrnl exe Blue screen viewer I went into safe mode changed up the start up services amp chose load with basic drives amp it started again normally Moment i load it with full drivers it shows again the same bsod error I did Sfc scannow many times- no Multiple BSOD - Caused by driver ntoskrnl.exe..please help abnormalities i did run memory diagonistic tool f many time - no abnormalities i am using McAfee antivirus without any virus present I have attached the zip file for your reference Kindly let me know if you need any other info

A:Multiple BSOD - Caused by driver ntoskrnl.exe..please help

Hi,

From your logs:


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck F4, {3, fffffa8004dbbb30, fffffa8004dbbe10, fffff800039cc350}
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 7A, {fffff6fc500799e0, ffffffffc0000010, 100311880, fffff8a00f33c000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36c1a )
F4 and 7A errors are related to disk, storage usually.
They can also be related to RAM and virus infection, but your logs
are pointing towards your HDD:

ERROR_CODE: (NTSTATUS) 0xc000009d - STATUS_DEVICE_NOT_CONNECTED
DISK_HARDWARE_ERROR: There was error with disk hardware
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error.

This is supported by your event logs:


Code:

Event[15454]:
Log Name: System
Source: Disk
Date: 2013-08-25T18:57:49.385
Event ID: 51
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Narang-PC
Description:
An error was detected on device \Device\Harddisk0\DR0 during a paging operation.

Event[33616]:
Log Name: System
Source: Ntfs
Date: 2013-08-30T17:20:43.650
Event ID: 55
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Narang-PC
Description:
The file system structure on the disk is corrupt and unusable.
Please run the chkdsk utility on the volume TI105838W0G.
Firstly I strongly suggest you Back up your data

Post a screenshot of your hard drive using Crystal Disk Info

Run chkdsk in an elevated command prompt in order to check for
file system errors and bad sectors on your HDD:
Click on Start>Type in search cmd
Right click cmd and Run as Administrator
At the command prompt please type: chkdsk /f/r
(There is a space between chkdsk and /f/r)
Chkdsk Tutorial

Test your hard drive. Perform a Hard Drive Diagnostic

Post back any results

Cheers

Dave

http://www.sevenforums.com/bsod-help-support/303869-multiple-bsod-caused-driver-ntoskrnl-exe-please-help.html
Relevancy 63.21%

Hi Eightforums,

I have been experiencing a few BSOD's yesterday, but most of them today. I have attached the a report from the SF Diagnostic tool. From a bit of research I found out that is could be most likely be a Windows (core file?) or a driver error. As the title suggests I got 3 different errors and they are PAGE_FAULT_IN_NONPAGED_AREA (the one I get most often), ATTEMPTED_WRITE_TO_READONLY_MEMORY and this BAD_POOL_HEADER.
Hopefully that is enough for you to find the error.

Sebie

A:Multiple BSOD errors, same cause - ntoskrnl.exe+1850e7

Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions Please use Option 1 as it provides Event Viewer logs.

If you didn't run the "Grab All", then please do so. If you did run the "Grab All" then the report generator was terminated too early. Please let the app run for at least 15 minutes (or until the app itself says that it's done).

Most of the memory dumps blame ELTIMA Software's Hide My Folders ActiveX driver (HMFAxCore5decdc700443adec5f3e84408e3098ff.sys )Please uninstall this program and see if that stops the BSOD's
Analysis:
The following is for informational purposes only.

Code:
**************************Tue Sep 16 19:39:51.844 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-69671-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:13:05.611
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck BE, {ffffc00072ba7000, 80000001d401b121, ffffd00037a464f0, b}
BugCheck Info: ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
Arguments:
Arg1: ffffc00072ba7000, Virtual address for the attempted write.
Arg2: 80000001d401b121, PTE contents.
Arg3: ffffd00037a464f0, (reserved)
Arg4: 000000000000000b, (reserved)
BUGCHECK_STR: 0xBE
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xBE_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Sep 16 19:25:09.050 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-58562-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:27:09.818
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck 50, {ffffc000c93a8000, 1, fffff8002d687162, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments:
Arg1: ffffc000c93a8000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8002d687162, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: AV_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Sep 16 18:56:51.443 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-86937-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 17:33:... Read more

http://www.eightforums.com/bsod-crashes-debugging/53910-multiple-bsod-errors-same-cause-ntoskrnl-exe-1850e7.html
Relevancy 63.21%

Hi,

I have recently been experiencing BSOD several times in the space of an hour, and am unsure of the cause. Blue Screen view has indicated that all the BSODs are related to ntoskrnl.exe.

I have included the recommended files according to the BSOD thread instructions.

Any help would be greatly appreciated, as other posts have seem to identify unrelated software as a potential reason. Also, I have seen posts linking to a microsoft hotfix, however I am little wary of using the hotfix.

It may also be worth noting that I have recently been using a replacement power cable that is under-spec (19V at 3.5A, when the original was delivered 20V at 4.5A). I am not sure whether this is the cause as the problem does not occur when running games or in safe mode.

If you require any more information, please do not hesitate to ask.
Thank you in advance.

A:BSOD. Multiple errors all related to ntoskrnl.exe

Hello, Welcome to SF!


Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Missing Windows 7 Service Pack 1
Please install SP1. It fixed a lot of possible errors in Windows. Download Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) from Official Microsoft Download Center


Code:
sptd.sys Sun Oct 11 15:55:14 2009 (4AD24632)
This driver belongs to Daemon Tools which is a very well known causer of BSODs. Please uninstall using this uninstaller: DuplexSecure - Downloads


Code:
Security Processor Loader Driver ROOT\LEGACY_SPLDR\0000 This device is not present, is not working properly, or does not have all its drivers installed.
This means that your anti-virus could possibly be installed incorrectly, or it is corrupt. Please uninstall the one you are using now, and download Download Microsoft Security Essentials from Official Microsoft Download Center for testing purposes.


Code:
BIOS Release Date 10/22/2009
BIOS is also out of date, I suggest updating it by going to the manufactures website.

Please do this for now, and post back results.

-Justin

http://www.sevenforums.com/bsod-help-support/349175-bsod-multiple-errors-all-related-ntoskrnl-exe.html
Relevancy 63.21%

Guys I encountered multiple BSODs, It happens when I'm just surfing the net, games or sometimes even just by watching videos/movies.

I'am just a novice in troubleshooting with drivers and just follow steps on this forum and other suggestions, some driver caused BSOD already stopped from reoccurring(Thanks guys), but I'am stuck on finding the source of this new BSODs your help is really appreciated.

Here's my file N550-Mon_05_25_2015_120543_46.zip

A:Multiple BSOD (ntoskrnl.exe, NETIO.SYS, dxgmms1.sys)

Update: I do a clean install, and re-update all of my drivers and software, also uninstall some bloatware from ASUS, now I BSOD when watching video, or when there's .gif on my webpage, also chrome usually crashed.

where is my updated Logs.
N550-Tue_06_02_2015_153515_99.zip

http://www.eightforums.com/bsod-crashes-debugging/66398-multiple-bsod-ntoskrnl-exe-netio-sys-dxgmms1-sys.html
Relevancy 63.21%

This is a month old build that has been plagued by this kernel BG of Kingston extreme ram Intel I Causing multiple BSOD ntoskrnl.exe+75bc0 K processor Gigabyte Motherboard and a later added EVGA GB video card All inside of a corsair case and W PS I do ntoskrnl.exe+75bc0 Causing multiple BSOD have an Associates in Networking and computer tech but I have never diagnosed a blue screen problem before so this is all new to me As stated in the thread title ntoskrnl.exe+75bc0 Causing multiple BSOD it is the ntoskrnl exe bc kernel that is causing the blue screens and I am not sure what to make of it I used blue screen view and from the help of the board here I used the windows debugging tool and that also pointed to the same ntoskrnl exe bc kernel I downloaded the windows diagnostic tool and hopefully that was done right and properly uploaded because I could use the help I did run memtest and was given a clean bill of health but I might run it again just to be on the safe side I would greatly appreciate any help And merry Christmas John

A:ntoskrnl.exe+75bc0 Causing multiple BSOD

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\Compressed\SF_24-12-2014\SF_24-12-2014\122314-21231-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`0344c000 PsLoadedModuleList = 0xfffff800`0368f890
Debug session time: Tue Dec 23 11:32:05.166 2014 (UTC + 6:00)
System Uptime: 0 days 2:26:31.040
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa800a7ff910, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
contains the address of the PFN for the corrupted page table page.
On a 32 bit OS, parameter 2 contains a pointer to the number of used
PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa800a7ff910
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------


BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: rundll32.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80003532d50 to fffff800034c1bc0

STACK_TEXT:
fffff880`0e6776e8 fffff800`03532d50 : 00000000`0000001a 00000000`00041790 fffffa80`0a7ff910 00000000`0000ffff : nt!KeBugCheckEx
fffff880`0e6776f0 fffff800`034f47d9 : 00000000`00000000 00000000`739affff fffffa80`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x35084
fffff880`0e6778b0 fffff800`037db0f1 : fffffa80`106b7cd0 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MiRemoveMappedView+0xd9
fffff880`0e6779d0 fffff800`037db4f3 : 00000000`00000000 00000000`73950000 fffffa80`00000001 fffffa80`10fd8e60 : nt!MiUnmapViewOfSection+0x1b1
fffff880`0e677a90 fffff800`034c0e53 : fffffa80`0d16e060 fffff880`0e677b60 fffffa80`0de3e790 00000000`00000026 : nt!NtUnmapViewOfSection+0x5f
fffff880`0e677ae0 00000000`76ea155a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0014ad38 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76ea155a


STACK_COMMAND: kb

FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+35084
fffff800`03532d50 cc int 3

SYMBOL_STACK_INDEX: 1

SYMBOL_NAME: nt! ?? ::FNODOBFM::`s... Read more

http://www.sevenforums.com/bsod-help-support/356264-ntoskrnl-exe-75bc0-causing-multiple-bsod.html