Windows Support Forum

Satellite C660-1PD does not power up - LED flashing

Q: Satellite C660-1PD does not power up - LED flashing

Hello, can you help me?

laptop is after applying the paste to the CPU and the chipset, after pressing the power
just LED blinking, Fans also not works

Thanks for any advice
Relevancy 100%
Preferred Solution: Satellite C660-1PD does not power up - LED flashing

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 20.21%

Power outage due to storm. Came back on without pictures and documents. It's an HP desktop. Would a file recovery program work? I've tried some of the instructions online, but they don't work.

A:Lost pictures on Windows 7 from power outage

Oh mary; I feel your pain. Were the pics within one folder and now they're ALL missing?
Relevancy 20.21%


My laptop wont power on at all.
No charge light.
No light when power is pressed.

Was working fine yesterday.
Have tried battery and charger from identical working laptop to no avail.

Any ideas? I can usually fix laptops etc but if it wont power on at all I'm lost.

A:Dell Latitude E6520 won't power up (no lights at all)

Did you try removing the battery and AC adapter and holding down the power button for 30 seconds. Then re-installing the battery and try booting again?
Relevancy 24.94%

this post was edited
My laptop: toshiba satellite l550 ... The part no. Is PSLWSA-01000Q

OS: Win 7 32 bit Professional.

Problem: let me give you an overview of my laptop.... It was very slow until recently I did a system restore ... It is a laptop with fans that rev all the time and has the ability to overheat and shutoff once the laptop gets to about 105 degrees celsius.
My problem today is that I cannot boot the computer past the BIOS ... all the components within the boot menu fail to boot... These consist of in order of my boot settings.

1. P1-Toshiba MK5055GSX
3. Floppy
4. Realtek Boot Agent
When I clicked to try boot the Realtek Boot Agent an error message came up 18.08.14.jpg?dl=0

When I press enter on each of these in the boot menu the tells me the part has failed. Please Help me I would like to fix this issue.

A:Toshiba Satellite L550 problem

I am planning to buy a new LT but I'm not quiet sure what's the best one. What is good about Toshiba?
Relevancy 20.64%

Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened I finish tower Power will not work button My the pc and My tower Power button will not work when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F PANEL cords u know the pwr switch and all that jazz turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading P S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds nbsp

A:My tower Power button will not work

You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
Relevancy 20.64%

I have an older eMachines Desktop PC model EL1360G which has a 200 watt power supply.
I would like to upgrade it to at least a 400 watt power supply.
Does anyone have a suggestion as to where or what I should buy? I watched a few videos on youtube on how to do the replacement but how do I know all the plugs on the new unit are the same and will fit? Because if they don't, I'll be more confused than I already am.

A:Emachines power supply upgrade

Check and make sure all the connectors are the same as the ones you have

I'm not certain if the image above is what you have but I'm thinking it is.

Image above looks to have:

1x 20pin+4pin (ATX Power)

1x 4pin (P4)

2x SATA power
Does your power supply have these and only these?
Relevancy 20.64%

Hi guys, new here...I'm setting up a new pc, sooo a few questions here.
I'm planning on getting an Asus A88XM-plus motheboard, Amd X4 860K cpu and Sapphire R9 280 3GB video how much power supply would be enough...450-500W?..would 650 be an overkill? Is all of this fully compatible?
Do I need a sound card, modem or special cooling or something? ( I already have 2*8gb Ram sticks and HDD, don't really need DVD drive).
I'm also thinking in between Antec 902 V3 case and a lot cheaper LC Power Gaming 975b Air wing much quality difference is there in between these two?
Also, how much improvement is there in between this card and my current one, sapphire r7 265 2gb?
Are there anything that you would exchange for something else...I'm on a tight budget, but I don't mind spending a few extra bucks if it be worth in the long run.
Thanks in advance.
Relevancy 20.21%

Microsoft showed off a whole range of new PCs and devices running Windows 10 at Computex 2015, but one that really caught the eye is the Quanta Compute Plug, an entire PC integrated into a power plug the size of...

Read more

A:Microsoft shows off PC integrated into power plug

They may be handy to a lot and even have very reasonable prices but I can't imagine myself ever wanting any of these.
Relevancy 20.64%

Hi, Guys (And Gals) I'm attempting my 1st PC build and HAVE used the various online power supply calculators... however I'd like to hear some feedback from you all. No matter where I look online I always like to come here to be sure. My specs for the build are as follows:

Amd A6 5400K 3600Mhz Blk Edt 1mb 65w Socket FM2


HDD: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G

I would really like to use one of the 350W or 400W power supply I stripped from my previous PC's. I'm thinking of hooking it to an HDMI or VGA projector eventually though (Haven't bought it yet) Can I get away with one of these and play a game like World of Warcraft? or do I need to order something like the
SolidGear 650W PS2 ATX Power Supply on Tiger Direct?

Thanks in advance for any advice & thoughts

A:1st Build Power Supply Question

Over engineer the PS;

Calculate the actual needed power,

add a fudge factor and

multiply by 1.5.
Then round up to the next commonly available size
Relevancy 24.51%

Hello I m posting this question along with a PDF explaining what I d like to do in terms of upgrading my Toshiba Satellite e -a My questions are I One or more of my USB ports are USB How do I determine which are USB and which are high-speed USB II Is there any reason that my BIOS won t allow me to upgrade from my current TB HDD to a TB HDD I just bought and received in the mail III What s the best way for me to clone my current TB HDD onto my new TB HDD I have a number of Disk utility apps on my computer already but if you recommend something else I ll use it instead Once it s cloned do I have to do anything special in order to get it to work Or can I simply swap out the HDDs and it My Laptop Upgrading Satellite Toshiba e55-a5114 ll boot right up If I m planning on cloning my current Windows and putting some Linux distros on it in what order should I clone amp install IV Can I add more RAM to my laptop even though the official website about my Toshiba Laptop specifically says MEMORY GB Upgrading My Toshiba Satellite e55-a5114 Laptop DDR L MHz Memory is not user replaceable If that s just an idle warning how much RAM can this computer take What s the upper-limit to the amount of RAM How much would you recommend that would give a boost to speed but also inexpensive and made by a trustworthy V I m going to make this new HD HDD run multiple OSes including Windows and - Linux distros How much space should I reserve for each Linux distro s mountpoints If I make one partition and label it as home will all my Linux distros be able to use it I d really like to have quite a few different Linux OSes on this computer because I want to learn how to use it better Here s the link to the PDF with much more information about my laptop as well as all my questions about making this upgrade work as quickly and painlessly as possible http bit ly e -upgrade Thanks a lot Yours Ev nbsp

A:Upgrading My Toshiba Satellite e55-a5114 Laptop

koesherbacon said:

My questions are:

I. One or more of my USB ports are USB 3.0. How do I determine which are USB 2.0 and which are high-speed USB 3.0?Click to expand...

not hard, but mapping which slot on the box is v2 - v3 was my issue

II. Is there any reason that my BIOS won?t allow me to upgrade from my current 1TB HDD to a 2TB HDD I just bought and received in the mail?Click to expand...

that would work BUT you need a fresh install and don't forget the system drivers

III. What?s the best way for me to clone my current 1TB HDD onto my new 2TB HDD? I have a number of Disk utility apps on my computer already, but if you recommend something else, I?ll use it instead. Once it?s cloned, do I have to do anything special in order to get it to work? Or can I simply swap out the HDDs and it?ll boot right up? If I'm planning on cloning my current Windows 8.1 and putting some Linux distros on it, in what order should I clone & install?Click to expand...

This solves the prior question - - clone it. I would clone anyway possible and after the fact, resize the C: partition

IV. Can I add more RAM to my laptop even though the official website about my Toshiba Laptop specifically says ?MEMORY: 6GB DDR3L 1600MHz (Memory is not user replaceable)? If that?s just an idle warning, how much RAM can this computer take? What?s the upper-limit to the amount of RAM? How much would you recommend that would give a boost to speed but also inexpensive and made by a trustworthy?Click to expand...

not user replaceable means what it says - - it's sodered to the MB and there may not even be slots for memory

V. I?m going to make this new 2HD HDD run multiple OSes including Windows 8.1 and 1-4 Linux distros. How much space should I reserve for each Linux distro?s mountpoints? If I make one partition and label it as ?/home?, will all my Linux distros be able to use it? I?d really like to have quite a few different Linux OSes on this computer because I want to learn how to use it better!
Remember, you can only have FOUR primary extensions and within one you can have several Logical Prtns. Most Linux distros have a bootable CD to try-it before you install.
Saves lots of work and time Click to expand...
Relevancy 66.65%

I have an lap top toshiba satellite c660 with both usb ports phisicaly damaged and after replacement they didnt worked , I mentioned betwen externel pins existe power 0,5 mA but middle pins I m not sure if they work,what should I do?
Relevancy 20.64%

Here's the situation. I have this old mITX computer I built a few years ago that I'd like to hook up to Dad's big-screen TV so he can Skype from his living-room. Problem is, the computer is VGA only and his TV is HDMI only. The MoBo has just one PCI (not PCIe) slot with a maximum output of 75watts.

I tried a PCI video card with HDMI output, but the slot couldn't drive the card. Didn't even detect it.

I believe DVI uses less power (the cards are definitely cheaper), and I could just use a simple DVI-to-HDMI cable. A native HDMI port would be better. As long as it works, I don't care. But w/o an external power input, the card can't draw more than 75watts from the PCI slot.

Anyone know of a card that fits this very specific bill? Thx.

ADDENDUM: PC only has a tiny 300watt PSU.

A:I need a PCI (not PCIe) DVI card (either <75w or w/power input)

Check this one out: Zotac GeForce GT 610
It is a PCI Card (non express) that has DVI / VGA / HDMI. It is also a Low Profile and requires a 300w power supply or higher. It looks like it should work with your situation.
Relevancy 20.64%

I recently moved my computer from one side of my desk to the other and somehow it managed to make it so when I press the power button nothing happens. I've disassembled and reassembled the computer numerous times and tested the psu. The psu is working and it seems like the motherboard is the culprit. What is confusing me the most is that when I short the 24 pin connector to the motherboard then plug it in if I also press the power button I can turn on the computer. I dont see that as a permanent fix just in case it sleeps and I assume it is not good for the computer so I am looking for help on how to permanently fix my issue. Thanks in advance.
Relevancy 20.21%

Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.

I need help as fast as possible

Thank you
Relevancy 20.64%


I've got FSP Aurum Pro 1200W.
What UPS should I buy for that power supply if we assume that it has 100% workload?

A:UPS for 1200W power supply

See watts to KVA calc:

issue: what is the power factor?

hint: PF ~ 0.75
Relevancy 20.21%

HI, I was wondering if it is safe to use an atx psu on a motherboard with an eatx power connector. The motherboard has a 24-pin eatx and a 4-pin atx 12v connector. I bought the motherboard and started using an atx psu and everything seems to work ok then realized after it was an eatx power connector on the motherboard. Are there eatx psu's? Thanks

A:Safe to use ATX PSU on a motherboard with an EATX power connector?

EATX is a form factor (12"x13") not a power connector. I'm assuming you are talking about using a PSU with a 20 pin (old ATX) connector with a newer motherboard that has a 24 pin (current ATX) connector. If that is the case you will need to consult your motherboard's manual. Some 24 pin boards run fine with only 20 pins some don't. The issue is that each pin in only rated to carry a certain amount of current (Amps). If you overload one of these pins your risk burning or melting the ATX connector on either the PSU, Motherboard, or both.
Relevancy 20.64%

I want to learn how to manage ARM processor power management with LINUX (for example the Cortex-A53 MP Core).
Can someone recommend literature, a tutorial or web based information?
Thank you in advance
Relevancy 20.64%

I was given a year old Corsair power supply XMPSU- TX-C I wanted to make sure it Questionable Power Corsair Supply s working right before plugging it to a motherboard So I did the paper clip power on trick and all the voltages were ok I proceeded to connect just one harddrive The harddrive spins up and then Corsair Power Supply Questionable makes a revving noise every second as if its powering down and back up repeatedly Also theres a green LED light on the harddrive that blinks normally its a solid on This doesn t happen every time I cycle the power supply however When the harddrive powers up properly the LED light is constantly on and rpm is constant I tried two other harddrive with the same outcome The problem is definitely intermittent I connected all three harddrives with the same results I tried the same setup with two other power supplies with no issues at all I am now sure the issue is specific with the Corsair power supply Is it because there s not enough load on all rails making the power supply unstable The AC current draw was only mA so it wasn t the overcurrent protection kicking in The V line was steady Corsair Power Supply Questionable but the V line fluctuated a few hundredths of a volt in unison Corsair Power Supply Questionable with the harddrive revving The V line was steady when the harddrive powers up normally I m hesitant to connect a full computer to this Anyone have an idea before I try to RMA the power supply Is this just a peculiarity of this model nbsp
Relevancy 20.64%

I am looking to get a new graphics card for my computer because atm it has integrated graphics, which as most of you know sucks. The power supply is 250W which I doubt would be enough to have a whole new graphics card implemented. The model is p6166f. The mother board has this for a graphics card slot PCI express 16x GPU. Please give me suggestions, I am looking to spend approximately 150 - 200 $ total.

A:Looking for new Graphics card and Power supply

We need to know who made your system. How old is your system?
Relevancy 20.64%

So I've been thinking about upgrading my GPU from a GTX 760 2gb to a GTX 980 but I'm not sure if I have to buy a new Power Supply aswell. I'm using a 650W power supply.
My specs are: MSI motherboard(forgot the name), 8GB ram DDR3, SSD 200GB, HDD 1TB, DVD-RW, 2 120mm fans + the CPU fan , a core i5 4670k (3.40 ghz) and the gtx 760 itself.


A:Should I upgrade my Power Supply?

Try this out;
Relevancy 21.07%

my laptop HP g61 does not power on either with battery or when connected to the mains supply(AC). whenever i press the power botton the battery lit in the front of the system will only blink for about 3 seconds without the system been power on(the fan,the keyboard light nor the power botton lit will not on) i try to remove the battery nd press the power button for 30 secs before putting it back,still their is no respond. but i discovered each time i remove the battery and plug it to the Mains,the indicator power light beside the plug of the system will lit for about 3 seconds before it went off again.i have checked it with another charging adapter all to no avail. pls ,help me out.

A:My laptop HP G61 does not power on

Perhaps you have one of those infernal HP laptop motherboard problems? How old is your HP g61, and have you kept the cooling channels free of lint and dust? How old is the hard drive?
Since it doesn't work from a battery or from wall power, you should have an experienced tech take a look.
First thing I would do is remove the hard drive, so you can rescue the data if need be.
Then I would remove the battery, and try again from the Mains. If nothing, then there is some real work ahead. Consider this a major failure in that case, and get expert help to take a look.
I doubt there is a quick fix.
Please keep us informed as to what you learn and what helped get your HP G61 back up and running.
Relevancy 20.64%

I know we had a thread on this in April of last year but what I really want is a poll so I can quickly see the numbers. What I'm trying to see is how many people are running 3 core machines and how many people have 6 core procs. Keep in mind I want to know actually cores, not the number of simultaneous threads you can run. Also, if you're using a multiprocessor machine please add up your cores. Also, if you have a triple core machine but it's not your primary I would appreciate it if you would post so in the thread.

A:How many cores power your primary machine?

Work related question or just curiosity?

I run 2 cores now in almost everything I physically use. I have a single core system that runs and does stuff for me nearly 24/7, but I almost never sit in front of it.
Relevancy 21.07%

I m a tech with years of IT experience PSU. power bad Still or motherboard a won't up Not and I ve built my fair share of computers over the years I have a puzzling one I cannot get to Not a bad motherboard or PSU. Still won't power up the bottom of I m afraid I cannot for the life of me Not a bad motherboard or PSU. Still won't power up get this computer to power on Here is a list of things I ve tried and or eliminated The first thing to happen was quite strange The computer would start when I first got it it was a used system but only after a few presses of the power button I don t ever remember it powering up on the first press of the power button It s an Intel DX BT Extreme Series motherboard with a bit Intel CPU in it GB of RAM FYI the motherboard has a aux power on off switch ON the motherboard itself used for testing at the labs - the manual recommends using the front panel switch however obviously Current state the computer will not turn on at all There are two LED s by the CPU that are for indicating a voltage regulator overheating and the CPU overheating When I hit the power switch the VR Regulator LED blinks quickly once and that is all Ok here goes - Tested PSU came back fine Decided to use that PSU in another system to double check would not boot up in the nd system I replaced the PSU with a good one I know that works of even higher wattage Still doesn t boot up - Tried using onboard power switch same result Tried using the reset switch as a power switch same result so the switches are likely OK I even removed all front panel switch connectors and tried to jumper the two power pins using a flathead screwdriver Still doesn t boot up no power only a solid green light on the mobo when power is plugged in - Reseated all RAM sticks although a system should still POST if a stick is bad as well as CPU same result - Replaced RAM with RAM I know works Same clock speed compatible with this motherboard Again if it s RAM it shouldn t prevent the fans from spinning - Replaced CPU with a good one same socket factor Still no powering up - Removed all other hardware USB cables video card speaker connector drives etc same result - Also replaced the fan with a non-OEM intel fan that has a higher RPM and draws more air - Tried replacing thermal paste on the premise that since the VR reg is showing it s overheating hopefully this would do something - Replaced CMOS battery Same result After testing just about everything I came to the conclusion that it must be a bad motherboard What Yeah a faulty Intel motherboard I ve never heard of such a thing So I RMA ed the board and got the new on in the mail How puzzled was I when the same exact thing happened Words can t describe Solid green light when power cord is plugged in VR light flashes BTW the green light is a V Standby Power Indicator Now in the manaul it states that these lights CPU amp VR LED s will flash when they re indicating a fault not blink once So I tried all the steps again nothing I have replaced every piece of hardware I can think of with good hardware and am still getting the same result - a flashing VR regulator LED Intel has no support for this and the people I ve spoken with at tech support at Intel are stumped My only thought left is a grounding issue which would seem strange to me since the problem gradually got worse that is taking more presses of the power button to power on then eventually no response I am going to switch cases and see if that s the problem If that fails I am out of troubleshooting steps - I ve literally replaced EVERYTHING inside and outside the computer Again to reiterate these are the things that have remained constant in both motherboards original and RMA ed Solid green V Standby Power Indicator Flash of the VR LED when applying power I have replaced every component with the exception of the case and the standouts which I believe have grounding rings on the threads Any ideas nbsp

A:Not a bad motherboard or PSU. Still won't power up

Speaking of shorts, try pulling the motherboard out of the case. Place it on a non-static, non-conducting surface and leaving in the CPU, heatsink/fan, only hook up the PSU, RAM and graphics card, see if will post.
Relevancy 29.67%

Hello everyone - I have just assembled a new build It will not power up I need a suggestion to figure out if the problem is the case or the motherboard This is a mini-itx build power-up: power New or Build MB? no supply case's The case is New Build no power-up: case's power supply or MB? Linkworld LC - B This case comes with a volt watt external laptop-style power supply that plugs into the rear of the case just like New Build no power-up: case's power supply or MB? a laptop power supply plugs into a laptop - a barrel connector Inside this power connection connects to a power supply component that is not like a regular ATX power supply but is on a printed-circuit board New Build no power-up: case's power supply or MB? mounted on the case This has several capacitors and other stuff From that comes the -pin and -pin power supply lines for the motherboard I assume the -volt power supply for this external power supply unit is right since it came with the case It was watt The processor is an IBM t with TDP of watts Lower-powered CPUs can be put in a small so I assumed the power supply might be under-powered I ordered a -watt volt power supply with the right size barrel - and same polarity pos inside The MB is an ASRock H MV-ITX It is mini-itx form factor Still same problem Everything is connected correctly When I press the power-on button an external CD drive I have plugged-in spins up for a while But no power light comes on in the front of the case there are no POST beeps the fan for the CPU does not spin up No other signs of life So power is getting into the MB - the external CD drive is plugged into a USB socket in the rear panel of the MB After trying a watt and watt power supply I believe the problem cannot be the power supply cord Can it be that I have too little load I don t think so I plugged in another mm fan and an ol-fashion floppy drive just the power connection to add more load - same thing no power-up no POST nothing but the CD drive will spin up when I open-then-close it yet again So here is the help I need what else can I try -assuming the MB and case are fine is it more likely the case power supply is bad or the MB --Thanks nbsp

A:New Build no power-up: case's power supply or MB?

Well, I figured out the problem.
I am planning to re-do the older mini-itx system I have; it has gotten riddled with Trojan software for kids downloading games; it basically has been de-commissioned already.

So, I took the pico-psu power supply from that older computer, and hooked it up to the one I am making. Everything went perfectly.

So, I un-did that, removed the MB from case, disconnected the barrel-power connection from the case, unscrewed and removed the power supply that had been mounted in the case, put the pico-psu power supply back in place (I had to drill the hole for the barrel-connection out to be a little bigger since the pico-psu internal/external connection is threaded and held in place by nut with lock washer), and routed wires to be clear of cpu fan, screwed MB to stand-offs, and closed it all up.

now, everything is great. I like this linkworld case, but the power supply is worthless. I may try to get a few dollars back from the ebay vendor, to make me happy with a case that is less than what I should have gotten, but is working for me; I don't want to wait on returns, etc.
Relevancy 20.64%

My new build wont power on all I hear is a few high pitch sounds coming from what I think is the psu.
My specs:

1TB HDD (from previous build it was working fine 2 days ago)

2TB HDD(from previous build it was working fine 2 days ago)

GPU = GTX 680 2GB (from previous build it was working fine 2 days ago) MSI GTX 970 GAMING 4G GeForce GTX 970 4GB 256-Bit on it's way in the mail.

Case is pretty old and doesnt have a lid but it was working fine with my pervious buid)

PSU = CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31/ EPS12V v2.92 80 PLUS BRONZE Certified Active PFC High Performance Power Supply (from previous build it was working fine 2 days ago)

Heatsink = Scythe Ashura Universal Processor Cooler

CPU = Intel Core i7-4790K Haswell Refresh Quad-Core 4.0GHz

Motherboard = MSI Z97-Gaming 7 Intel Z97 Motherboard

Memory = CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory

Please help me

A:New build wont power on

Disconnect everything except the monitor, cpu, ram. In fact, go down to 1 stick of ram. Will it POST now?
Relevancy 19.78%

24x7 - Low Power Consumption ? Internet Download Machine

I want to build a System that has LOW POWER Consumption.


Mostly Downloading Stuffs , Might Host Own Cloud too , Email Clients , IRC Clients , Other Internet Connected Apps

I was thinking of a Kabini System

Athlon 5350 (25 W TDP) & Some AM1 Mother Board

Again I was thinking about the Intel G3258 Anniversary edition processor (But it has Much Larger TDP)

It should be A Windows 7 Machine . Not Linux or other what nots !

But I am Here for some Advice. I already told you my requirements.

Advise me - What should I do ?
I only want to buy

Processor + Motherboard + RAM



I have the rest

A:Hardware Suggestions - 24x7 - Low Power Consumption Internet Connected PC

Hmm; Why is power consumption a hi priority issue - - are you running off a solar powered system or portable generator?
Relevancy 20.64%

A good example of why not to buy cheap power supplies.

This power supply was about 6 months old, Used for 2 or 3 days per week, And drew around 450 watts under full load.

Thankfully the rest of my pc components were spared. It was used in my second older pc, I use a corsair TX850 v2 in my main machine.
Relevancy 20.64%

I have Toshiba satellite model C875?7304. The battery indicator on the desktop says that it's charging but the percentage is depleting. This is on a brand-new battery that came with 67% full and a new adapter. When the laptop is off the LED indicator in the front is lit like the battery is charging. However it is not. After leaving it plugged in for a few hours the percentage was the same as when I turned it off. Also the adapter wasn't warm at all. I've tried all Toshibas recommendations removing all power from the laptop and holding the power button down for 30 seconds to a minute. Also removing the battery for the bios and reinserting it. Still that hasn't worked. I removed the laptop battery and the laptop will not power on using AC power only. It's almost like the laptop is only using battery power and the adapter is not charging the battery or keeping the laptop on. Laptops only about a year old. Any suggestions anyone?

A:Toshiba satellite charging but not charging

As the laptop's only a year old the original battery should be fine and not need replacing. Also if it won't run from the AC power only something is wrong. Look for your receipt and if it's still under guarantee take the laptop back.
Relevancy 20.64%

Sorry I must not have sent the last post correctly I am new to this site So I will try again I was getting ready to upgrade to bigger hard drive or drives Before doing that I needed to take the old hard drives out to obtain some information off the labels I did so and while they where out I cleaned the Mounting slots a little better than using just No drives to SATA Power hard air Having done that I re-installed them both When I turned on the power button the button lit up and the fans were running But No Power to SATA hard drives it No Power to SATA hard drives does not seem that the hard drives are getting any power as I can t hear or feel any thing Plus the computer is not booting No Power to SATA hard drives I don t recall unplugging anything other than the two hard drives But I also notice that I have a short cable bundle with two white plugs with three pins and one empty pin hole on the other end a black connection with with five connector slots with one middle on blank That makes me think that I unplugged the power to the hard drive someplace along the ling As I have a wire bundle that has two SATA power connectors that are plugged in But their are three white female plugs marked P P and P which are not connected to anything in that wire bundle I don t know at this point if the power comes through that bundle from the power source Of if I do not have the power plugged into the lope I hope that somebody can help me figure this out and let me know if I burnt out the hard drives and have to start over with my recover disk reloading windows and going from there nbsp

A:No Power to SATA hard drives

How would I close this post out. Dumb me had the monitor plugged into an unused VGA port. It only took me two and a half days to figure that out. I wanted to let others know to check and see if they have everything plugged in where it should be. Including the VGA or other monitor cables.
Relevancy 20.64%

I wanted to reset my admin password on my asus ultrabook,
so I took advice from some wanker who told me to remove round battery for 5 min, unplug it from motherboard, plug ac power in without replacing battery yet....... So... THIS WANKER DID!...
Now turning my computer on ive got nothing .... Except a 'battery charging flicker', when releasing power button after holding it a long,long time!!!!! PLEASE HELP ME IM STUMPED, OR SIMPLY THE OWNER OF A PAPER WEIGHT? .... ( I did see a green light briefly when I plugged it in, without the round battery. )

A:My Asus Ultrabook won't power up

Sounds like this procedure corrupted the motherboards bios, and you may have a "paperweight" now for good. Did you re-install the "round" Bios button battery?
Relevancy 20.64%

I have a 9 yr old Desktop PC and my power supply is going out. The one I have is a modular style power supply. Is it required that I replace it with another modular power supply or does it matter?

A:Buying new Power Supply

No, it doesn't matter which one you use. Use whatever type you wish.
Relevancy 21.07%

I had a completely new experience.

I installed a new R9 280 today.
I have a CORSAIR HX Series HX750 750W 80 PLUS GOLD PSU. ([email protected])
I was running an ATI 6870.

Previously I never heard the PSU. While checking out a game a fan ramped up and I thought it the
R9 280. I thought man that's loud. Through some experimentation I found the R9 280 fan noise was not the problem but the HX 750. I cannot tolerate too much noise from my computer so this PSU has to go.

I know the R9 280 draws more power then the 6870 so the PSU is doing it's job.

My question is: How many watt PSU would I need so it won't ramp up....or are there other considerations I need to focus on as well...besides the +12 rating and wattage.

Thanks for any help

A:Power supply has to go. No, I am not asking which one to buy.

Just get the Rosewill Gold 450w, I think it's on sale.
You won't really find any good passive power supplies.
Relevancy 20.64%

I bought a gaming PC, and I am wondering if my graphics cards and the computer itself are pulling to many watts, Will the lighting inside the box put a demand on the power supply??? I am debating about taking them out, I don't even have the lights on anyways I find them a waste they came with the computer I bought

A:Will lights draw too much power?

Josh86 said:

I bought a gaming PC, and I am wondering if my graphics cards and the computer itself are pulling to many watts, Will the lighting inside the box put a demand on the power supply??? I am debating about taking them out, I don't even have the lights on anyways I find them a waste they came with the computer I boughtClick to expand...

Josh*^ - the lights could not possibly be pulling more that 10 watts, at an extreme. Probably they are actually pulling a level that you could not notice before-and-after if you used an actual measurement, such as with the Kill-A-Watt.

Same for fans, and most anything else you plug in or on except video cards.

Everyone: you will spend all kinds of money to have powerful components, and a suitable power supply - so go ahead and get an ACTUAL power draw measurement -

The kill-a-watt is simple to use and read, very simple. it costs $20 or $25.

You can use it on anything you plug into a 120 volt outlet. Vacuum cleaner, hair curler, radio, anything. It tells you exactly how much power is being used. Exactly.

For over a decade, these power calculators have been estimating power needs, and they have been over-estimating by 100% the entire time.
Relevancy 20.64%

Greetings I ve moved to another country where electricity is not stable and goes high low or even disconnect power failure many times a day So i brought an old UPS i have discovery and connected it to the outlet and connected the PC and the LCD screen to it Sometimes when the electricity goes high down the UPS seems can t regulate fast enough or when the electricity disconnect the UPS can t change to battery mode fast enough so the PC restarts I though the problem is from the UPS so i bought failure during My despite restarts UPS PC power a new one iXA PRO which also has a built in AVR with wide input range of - Vac wide range of input frequency output short circuit protection overload protection and the transfer time My PC restarts during power failure despite UPS is ms I connected the PC and the LCD screen My PC restarts during power failure despite UPS to the new UPS and connected my modem and an external hard to the old one Surprisingly when the electricity went high low or when it disconnected the modem did not reset but my PC restarted which means that the old UPS is still working and the problem is from the PC itself I use My PC restarts during power failure despite UPS a very god power supply Blue Storm - wat so any idea what the problem could be Note When the electricity goes high low or disconnect the PC doesn t actually restart it just half turned off i mean i can still hear the fans rolling but there is nothing on the screen and i have to turn it off then on Note Sometimes when electricity goes high low or disconnect the PC keeps working normally Thanx in advance nbsp

A:My PC restarts during power failure despite UPS

My guess is your power supply in your PC uses active PFC (Power Factor Control) while your uninterruptible power supply is likely rated for a passive PFC.
Relevancy 20.64%

My sister's 13" MBP (2011) died a few hours ago. According to what she told me, she was using it, and then, poof, black screen and no power. She doesn't have the cash at the moment to have it properly checked by a tech, so I did a basic troubleshoot in an attempt to narrow things down.

While the internals are a bit dirty, I didn't see any obvious signs of physical damage (it was relevant to check for this). Furthermore, the machine doesn't seem to respond to any power sources. I tried a couple different power cables and, while the little amber light on the magsafe (sp?) tab will come on briefly, the computer with neither power on nor display a charge on the built-in charge indicator. I will also note that the machine failed while disconnected from an outlet source with a full battery indicated.

My initial conclusions are a) the computer fried itself or b) the battery is toast. Any suggestions?

A:2011 MBP 13" Won't Power Up

If no one here can offer any insight, I would post this to the Apple discussion forum. There are usually people there that can diagnose this from just a description so that is your best bet.
Relevancy 20.21%

I turn-on the power on my laptop and all I see is a cycle of Red, Green, Blue, White, & Black of color on my screen. Computer was working the night before. I do not know much about troubleshooting a computer. Can anyone please give me an advice or guide if this is something I would be able to tinker to work or bring the laptop over for service.
I have a Dell XPS1730 (5 years old) with Nvidia IUPGA5D G84. Recently, upgraded to Windows 7
I appreciate your assistance.


A:Laptop screen flashes RGBWB color upon power-up

The internal video has died. To verify this you can attach an external monitor and see if the display is normal
Relevancy 20.64%

So I've got a mostly custom built pc, its motherboard has everything built in(Graphics.etc) but im looking to upgrade to this for graphics:
I have two questions:
1. I have a 500w psu currently, will I have to upgrade, and by how much. will I take of the built in graphics on the motherboard.

And also, are there any reccomendations for a better psu

A:Power Supply Vs Graphics Card

Product Description
Technology:GDDR5 SDRAM, Size:3 GB, Bus Width:384-bit, Effective Clock Speed:6.4 GHz, Width:4.2 cm, Depth:31.1 cm, Package Type:Retail, Height:15 cm, Cables Included:1 x DVI-VGA adapter, Peripheral / Interface Devices:Two 8-pin power connectors, Required Power Supply:750 WClick to expand...

your link clearly states that a 750w PSU is required.

you can use any of these online power supply calculators:
newegg(store) calculator(power supply requirement)
outervision calculator
Relevancy 20.64%

When I power on my Toshiba equium a200-151, the screen lights up but no display at all - even though there is loading activity. I rigged up to my PC monitor and everything is fine - see bios and windows loading etc. Borrowed a spare compatible working screen but same problem. I'm not 100% sure if its the inverter or the ribbon connector - any ideas before I buy a new inverter? Thanks for looking.

A:Lcd lights at power on but no display

I would say that the video cable (ribbon cable) is bad based on what you have tried so far. This cable goes from the motherboard to the LCD display. Did you use the old inverter off the suspect Toshiba when you tried the compatible spare LCD panel?
Relevancy 20.64%

Hi all. I just bought a graphics card that needs 350 watts and +12v with 20 amps to run. My power supply has to following output:

+5V 22A MAx -12V 1A max
+5V (FP) 2A Max +3.3V 17A max
+12VA 18A max +12VB 18A max

combined power on +12VA and +12VB rails must not exceed 360 watts

Total combined power must not exceed 375 watts

Can it run the card?
Thanks all.

A:Can my power supply run my new video card?

Hi, could you please post a little more detail.
Instead of saying graphics card, it would help if you said the actual graphics card.
Instead of power supply, you could say what power supply you have.
Relevancy 20.64%

Hi there. Since I bought my new mouse and illuminated keyboard, when I use the PC a lot, they have spontaneously been stoping for a period of time and then they work fine. I didn't have this problem before because I had a ps2 keyboard. Now I have USB mouse and keyboard and this happens. I do believe there is a problem with the power management. A friend of mine has the same motherboard and he incurs the same problem. I have a Gigabyte GA-B75M-D3V and here is a printscreen of my bios with the power management tab.
What settings should I change?

A:Bios power management


I think you'd be able to adjust that power management settings in Windows under

Control Panel>Power Options>Edit Plan Settings>Change Advanced Power Settings>USB Settings
Or in Device Manager>USB Root Hub Properties>Power Management Tab
Relevancy 29.24%

I have had a look round the posts but nothing I try stops the internal drive getting accessed.
I have unchecked the CD autorun using TweakUI (this worked for someone else)
I have temp disabled AVG along with BoostSpeed and Team Viewer
The only process running apart from sys idle is svchost.exe (1%)

I hope someone out there manages to work their magic as they did the last time I posted here!

A:Hard drive light flashing with nearly no processes running

Sounds like the System Index service is running.

When you find that happening, disconnect from the Internet to be sure MS Update is not running or something on your system is phoning home to be sure.

To see all Internet connections from your PC, grab a copy of CurrPorts - - runas admin and you will see everything. Click on the column heading Remote Host Name to get active connections at the top if the list. The menu Options is used to customize the display; here's my list

display Listen, Established, TCP, UDP, IPv6,

display port in The Address,

sort on refresh,
Ask Before Any Action
That last one is interesting; running as admin, you can Close a port or Kill the application with that port.

CurrPorts identifies all ports on the pc (mine number 112 as I write) and if I select all ports with a Remote Address, I see I have 20 connections.

btw: Remote Addresses shown as are local services (like a proxy or AV service), so out of the 20, only two are actually remote - - both HTTP browser connections.
Relevancy 20.64%

Is my motherboard compatible with and does it have enough power watts it compatible my Card have power new to & enough with run Is mob Video to run new video card My specs More details about my computer Component Details Processor Intel R Core TM i CPU GHz Memory RAM GB Graphics Intel R HD Graphics Gaming graphics MB Total available graphics memory Primary hard disk GB Free GB Total Windows Home Premium System Manufacturer Gigabyte Technology Co Ltd Model H M-UD H Total amount of system memory GB RAM System type -bit operating system Number Is my mob compatible with new Video Card & have enough power to run it of processor cores Storage Total size of hard disk s GB Disk partition C GB Free GB Total Media drive D CD DVD Graphics Display adapter type NVIDIA GeForce LE Total available graphics memory MB Dedicated graphics memory MB Dedicated system memory MB Shared system memory MB Display adapter driver version Secondary monitor resolution x Primary monitor resolution x DirectX version DirectX Video Card Information Network Realtek RTL D D Family PCI-E Gigabit Ethernet NIC NDIS New Video card info Nvidia G-Force Video Px Video card UPC- Mb PCIExpress X Dual Monitor Support My power supply is watts and on my motherboard now there is only sticks of GB ram Patriot Viper Extreme and nothing else in any of the expansion slots I looked online but cannot get a straight answer Can my motherboard run this card with no issues Thanks I am shine nbsp

A:Is my mob compatible with new Video Card & have enough power to run it

No one can say if it will run with no issues, just because there could be any number of complications that could pop up. If you asking will it work with your current system, then yes it will run on your current system with the PSU. I would advise that you uninstall the video drivers (and software) for the current card, changing out to the new card. This will create less of a head ache for you in the end.
I would also suggest trying to find another 2GB ram stick because your motherboard is a Dual Channel motherboard and the computer will run better if you have 4 sticks of ram instead of 3. Its not going to hurt your computer by having 3 sticks of ram versus 4, but you will get better overall performance.
Relevancy 20.21%

I have put together a new build with the Gigabyte Assassin 2 m/board and a Corsair AX 860i PSU. On start up the PSU clicks out and won't run. The PSU Self test is good - green light and the fan is running, however when I connect all the peripherals the PSU just drops out and will not run. I have double checked all connections from the CPU, M/board, memory, graphics cards. This is all in a Thermaltake Level 10 case, my next check will be the hard drive connections - hot swap bays. Any help will be really appreciated.
Relevancy 20.21%

Hey guys I had some contractors doing some work on my house today and they needed to shut the circuit off to the room my computer was in The computer was on at the time so it shut off when the power was cut Now it won t go back on Power button does nothing at all and I don t know if it s the power supply mobo or switch I ve got a power supply tester which causes my computers fans to start up when it s plugged in so the power supply does respond not Power mobo button working... issue? The results are in the attached file It shows LL which means to low to register voltage for the - V line I honestly don t know if I even have that line so I don t know if that s bad I attached the label on my power supply too Would Power button not working... mobo issue? no voltage cause a computer to completely not respond Because the fans DO start up when the power supply tester is plugged in I don t think the switch is the problem because I tried to short the power switch jumpers with a paper clip and nothing happened I also took the CMOS battery out for a while and then tried it again and that didn t work Any ideas on whether I need a mobo or a power supply I don t have an extra PSU around to test with but I may try to find one before ordering a new mobo thanks in advance -mike nbsp

A:Power button not working... mobo issue?

Not the switch. Could be the motherboard or PSU, but I don't have any good insight.

I would unplug the PSU and flip the 120/240V switch to 240V, then flip it back before plugging it in. To me, this doesn't make any logical sense, but over about 16 years of playing with PCs I have seen it work twice.
Relevancy 19.78%

My brother in law has a got himself a free computer to which I am going to donate my old Sapphire X1950GT graphics card. The problem is, is that I can't easily wire it in to the computer as it has a crappy generic PSU with only one Molex and several Sata power plugs.
What I do have, without slicing and dicing and getting out the soldering iron, is the adaptor cable below. What I don't know is whether this has a sufficient amount of wires I.e. 0V and 12V to provide power to my G/Card.
Any ideas?



A:Wiring a graphics card to a generic PSU - sufficient power wires on plug?

System power consumption with a Sapphire X1950 GT is less than 250W. I think you will be fine with the splitter mentioned above. You probably don't need much extra power to run the card. I assume there is at least a 300W PSU or greater in the system.
Relevancy 25.37%

Hello hello This is my first post so apologies if I do anything incorrectly I have an old Satellite Toshiba down shutting Toshiba Satellite which is old and crotchety so I decided to take the chance to play with it with the intention of fixing it up a bit and passing it on to someone else who could use Toshiba Satellite shutting down a computer I uninstalled lots of things cleaned it up Toshiba Satellite shutting down - all good I took it apart gave it a good clean - all good apart from when I took the screen off both of the hinges were snapped at the bottom and just fell apart when I lifted it up So I ordered some new hinges they arrived this morning I put them in put Toshiba Satellite shutting down the laptop back together and turned it on All seems well and good EXCEPT - it has now started shutting itself down It s not a battery problem because the battery hasn t been in it yet At first I thought it was something I had done to the screen because it did it when I was tilting the screen but I have since realised that it s when I touch the touch-pad or indeed anywhere along the front underneath the keyboard It seems to be fine - as long as I don t touch it Have I done something heinous to the laptop or can I sort this out I really hope I haven t killed it Side note - I blame PC World for so many things they are the only people who ve had their paws on it in the past and there are a few screws missing no - I didn t lose them a couple of screws that are the wrong size and the hinge screws are too big one of which as I was screwing it back in shredded the groves I think cause now it just turns and turns before I bust a gasket with this if anyone has any tips as to how to get this screw back out again I d appreciate that too Thank you VERY much in advance for any help nbsp

A:Toshiba Satellite shutting down

..."I took it apart, gave it a goo d clean"...Did you remove the CPU fan(s) or heat-sink assembly?
Relevancy 20.64%

Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.

A:No power after motherboard install

Ratchetz said:

Hey how's it going. Any help would be great.
Had an older system so got a new motherboard and CPU. Installed it all and then no power when I try to switch it on. The orange modem light comes on but nothing else turns on.

New system-
Motherboard- z87-d3hp
CPU- i7-4770
Gpu- GeForce GTX 460
Ram- Kingston DDR 3
Psu- Shaw p4s6 860w.

Thank you

I also tried putting in one ram card at a time. Taking the graphic card out and using on board. Taking the motherboard out of the case to see if it was shorting out.Click to expand...

By any chance could you post a picture of your computer as it is hooked up right now so we can see if your missing anything. Try to check if the 4pin/8pin connector on the motherboard is hooked up and check for tightness of all the Motherboard connectors to start with.
Relevancy 21.07%

Hi im planning to maximuize my fans in my case Phantom But im not sure if My power Supply could Handle it Right now It Running on Phanton Case top MM fans rear mm fans and front mm fans Raidmax RX- K W ATX Power Supply ASRock GM-VGS FX AM w Radeon AMD FX- GHz Quad-Core Processor AMD Stock AM AM w Case Fan GB Supply Power x GB DDR MHz GB SATA Hard Drive DVDROM DVD Reader Power Supply Drive External USB Wireless N Adapter SAPPHIRE R GB DDR WITH BOOST Required watt My system is running fine now even if I put the fans controler into max speed but now im planning to maximize my fans in my case here is the fans status for my case Side x x mm included rpm Front x x mm included rpm Top x x mm included rpm Rear x x mm included rpm Bottom x mm HDD Pivot x mm Question Can my PSU handle everything for my system im also planning to upgrade my ram to gb or What is the Power Supply recommended for my system Or when im planning to upgrade my motherboard what would fit well with my system looking for slot ram or if my watt power supply strong enough to power thermaltake dual frio heatsink Thx you very much for trying to help nbsp
Relevancy 19.78%

Hello all I made a post regarding the performance failing of one of my supply power affect hard performance? drive/computer Faulty hard drives The conclusion we came to has unfortunately not resolved my problem and I am beginning to think my Power Supply may be the culprit Faulty power supply affect hard drive/computer performance? ------------------------------------------------------------------------------------------------------ Before I go into details here is my current Hardware Q GHZ GIGABYTE EP -DS R GB PC mhz x gb x gb Nvidia GTX mb requires x pin power adapters Asus Xonar soundcard requires floppy power adapters Windows x Jeantech W PSU modular PSU PCI-E nodes and nodes for other devices gb HDD operating system tb HDD data tb HDD data tb HDD data - added recently ------------------------------------------------------------------------------------------------------ My original problem in brief Upon accessing certain files in one of my TB drives I hear a distictive quot click lockup halt quot sound and then the entire system crashes first the drive will become inaccessible then windows explorer will crash followed by the mouse and eventually a BSOD after a minute ------------------------------------------------------------------------------------------------------ I bought a new TB a month ago to replace what then I thought was a failing TB drive Since the problems have become quot random quot and happen across all four drives tb tb gb tb I am now considering my PSU the culprit Jeantech Absolute w It seems logical to me Sometimes while performing tasks which put stress on several HDD s at the same time my computer is quot choking quot running as fast smooth as it should but with sudden freezes with those HDD quot click - stop - restart quot sounds Booting into windows is failing from time to time freezes on the quot starting windows quot screen or DISK BOOT FAILURE Insert system disk The PSU is modular - could certain quot plugs quot in my PSU are faulty I haven t tested this extensively but in some cases when the computer is not starting up at all using different power ribbon cable combinations seems to help Also I had to remove my DVD drive completely when I first installed the new TB I bought and I don t think my computer will start at all with it plugged in anymore so my PSU MUST be having a hard time coping with all the components If it is of any relevance I use an Nvidia GTX which requires x PCI-E pin power connections hard drives power is supplied via THREE modular ribbon power cables - two HDD s share power from the same ribbon cable lastly worth noting I use an asus Xonar sound card requires floppy power connector several symptoms suggest the PSU any thoughts nbsp

A:Faulty power supply affect hard drive/computer performance?

a 1000Watt shouldn't have any problem coping with the components that you have, i would recommend that u borrow a power supply from a friend and try it out on your computer, maybe the power supply is old and is not supplying proper voltages on all the rails....
Relevancy 21.07%

Hi can anyone help please, I just received my new Plait GTX Nvidia 770 Jetstream card and noticed it came with an 8pin and 6pin power requirement. They provided a 6pin to 8 pin adapter and I have a Corsair 650 TX PSU with 2 6pin power lines problem is the 6 to 8 pin adapter looks like it need both 6pin lines from the PSU to provide the necessary voltage/amps and that still seems to leave me short the other 6 pin port on the GFX card. Do I need to plug both 6 pin attachments in to the adapter or will one suffice?

A:GTX 770 Power Requirments

My bad, silly fool that I am I failed to realize both 6pin PSU power lines also have additionally the other 2pin lines required to make up the 8pin connection right along side. Thought I may need a newer PSU there! LoL
Relevancy 20.21%

I gave my external hard drive to a friend but his laptop didn't recognize it. after getting it back, I connected it to my laptop but it didn't show up in disk management at all. the drive is receiving power since the light is on. I felt the drive upon connecting to laptop and noticed it tries multiple times to rotate the magnetic disk but in the end it come to a stop and nothing after that. I think my friend's laptop somehow damaged my drive since I'm sure it's a hardware problem.
So, I was wondering maybe any of you guys have an idea how to fix it if possible otherwise, I'd like to know if I can recover the data without spending for the experts?

A:WD external drive receiving power but not working

Hey armmzd. Sure sounds like a drive gone bad, and assuming you know it was good when you gave it to him,maybe it was dropped,etc. All I can suggest is going to the drive manufacturer's site and see if they have a drive diagnostic tool you can try.
Relevancy 20.64%

Hi guys I ve spent today building a pc for myself However on pressing the on button there s no reaction at all My machine specs are M B - Gigabyte GA- A-UD Processor - AMD RAM - Corsair Gb DDR Case - Zalman Z Graphics card - Gigabyte HD PSU - Corsair CX M W Wi-fi card also installed but can t remember the name and seem to have temporarily lost the box in a pile of packaging So far I ve checked the CPU and motherboard power sockets the wall plug sockets and the power cord to my PSU I ve also checked the connections between my case and the motherboard and these all appear to be correct on power build PC doesn't As part of this final point I switched the power on LED with the power button they both originate from the same location so thought they may be mixed up Anyhows I got a solid LED which suggests to me that a there s power running through the switch circuit and b the pc isn t booting when told to as a PC build doesn't power on solid LED would indicate PC build doesn't power on circuit completion which would be the equivalent of holding in the on button If anybody could shed any light on where to go next I d be eternally grateful currently searching the house for a paperclip to test the PSU nbsp

A:PC build doesn't power on

Does the CPU and case fans move at all, when pressing the power button?
Relevancy 20.21%


I have a printer
There is no lighting up
The power supply give
red wire about 7 V
blue wire about 11 V

Holding down the power button en stop/reset won't work

How can I test the logic board is defect?

Image logig board

Relevancy 49.88%

Its my first turned power Supply Flashback when LED is flashing on build and I think my motherboard isnt working but more specifically I want to know why the flashback led is flashing when I turn on the power supply Power is going into the motherboard the standby light comes on as well as the Flashback LED but when I attempt to turn the computer on with the power button Flashback LED is flashing when power Supply turned on on the case nothing happens I ensured both the ATX power connectors were fully in everything is connected RAM is in but the computer will not boot Also I might have have connected the power to the case in at the opposite ends ground to power and power to ground but it has been reversed and if that is the problem would I have to replace the case or the motherboard Here are the specs -ASUS M A motherboard -Fractal R ATX Tower Case -AMD FX- core AM GHz -Kingston GB in SSD -Corsair TX -Kingston gb HyperX DDR Ram nbsp

A:Flashback LED is flashing when power Supply turned on

No idea but slight suggestion Power supply???
Relevancy 29.24%

Greetings I have a problem with my LED monitor and I m not sure where should this be posted either as hardware or software so I put it here The thing goes as follow I bought a samsung syncmaster SA LED monitor for my pc about a year and a half ago and so is now out of guarantee I havent had problems with it previously but recently vertical SA300 LED Flashing monitor samsung lines on flashing white stripes have started appearing on the display particularly when the monitor is showing black or dark colors and when I Flashing vertical lines on samsung LED monitor SA300 just turned it on Also it s been getting Flashing vertical lines on samsung LED monitor SA300 worse as time passes first it would only happen on first few seconds after turning it on but now it happens whenever dark colors are abundant on the screen wich makes me think this could be my monitor telling me it s about to die I would really apreciate if you could help me sort this out and if this is in fact a hardware issue if repairing is viable possible and it won t cost me more than half of the monitor original cost or if I should start saving for a new one crap I do recall having read on some tech magazine that LED monitors are more quot repairable quot than CRT and LCD ones so I can only hope it s not something bad Thank you very much in advance for whatever time and help you can provide me for my problem nbsp

A:Flashing vertical lines on samsung LED monitor SA300

Did you get this solved?
Relevancy 21.07%

I got this laptop, neo, 1 1/2 year in my possession, it so happened that I accidentally hybernate I for a couple of hours, when I tried to open it, the there is no booting taking place., no fan,just the led light for charging/power , I have tried the hard reset as suggested in other forum, but the charging light just blinking as I press the power button( connected with the adaptor and w/o the the battery)
is there any one know my case?

A:Laptop won't power on

Remove the battery altogether; then hit the POWER key, which will drain any power left onboard.

Now reinstall the battery and connect to the A/C charger - - does it show as charging?

Wait a few minutes and then hit power on again - - it should resume from hibernation.
Relevancy 20.21%

My mom gave me a Dell Dimension 4700 computer that was acting up. She said it would turn it's self off randomly and she thought it was a virus. When I brought the computer to my place, it powered on once, then I went to turn it on again and nothing. No lights, no power what so ever. So after doing some research I bought a new power supply for it. I just replaced the power supply and plugged the computer in and now there is a blinking amber light in the front and a solid green light on the motherboard but it won't turn on. I have checked all of the connections and they are properly seated. Any ideas what is causing the problem?
Relevancy 20.21%

My iphone 4S can not support whole day use as the battery nearly drain .

So I searched iphone 4S external battery in amazon and find Plush cartoon toys power banks AD below. The price is 29.99$ a little expensive as its 5200mAh. T (avoild link, delet url space when past in IE)

Also I found a external battery case here :

The battery capacity is only 1700mAh but can be used as a case protector for iphone 4s

Which one I should bought or

do anyone find the similar high capacity like 10000mAh but cheaper one in ebay or amazon and other place?

A:Power bank or external battery case?

Before you invest in more equipment, try to reduce power consumption (see this)
Relevancy 24.94%

Hey I just found this thread today a665d-s5172 Toshiba satellite I ll try to keep this post short Got a laptop that had obviusly been dropped for Toshiba satellite a665d-s5172 free but it s a toshiba satellite a d-s so I wasnt going t turn it down worst case a free Toshiba satellite a665d-s5172 blue ray player right well it had windows on it but none of the drivers having anything to Toshiba satellite a665d-s5172 do with network connection worked and there were still personal files on it so I decided I would use this as a windows machine Installed windows pro worked fine for about a day or two until I installed an update and ever since then the hdd C has been at and the one thing that I found that helps is disabling the DVD BRD drive in device manager this doesnt fix the problem completely but the average usage of the disc went from showing as to between - even when nothing is open and the actually usage still only adds up to about - I will post screen shots later after I get the machine to let me take them before it freezes also the cpu and memory are at and wile this problem happens so I think it s the same problem that a lot of people have after using windows for a bit nbsp

A:Toshiba satellite a665d-s5172

Any updates on this?
Relevancy 20.64%

My father is having issues with his computer and shut down The computer turns on and runs fine It shut downs successfully as far as I can tell Fans stop spinning power LED turns off but then starts itself about or seconds later POST beeps are one short then about a second later a somewhat longer beep at a different tone deeper if I remember correctly I then get a quot Power Surge Detected possible faulty PSU quot warning The computer continues to boot to windows properly if I allow it I haven t tried holding the power button when windows is running I don t want to either but all other attempts to shut down from windows lead to the same end result I can shut down from BIOS Shut Down and Power Supply by pressing the power button and the system does not restart itself I m not sure where to look There have been no problems with the computer during usual use It runs fine I don t see any signs of a PSU issue although I m not terribly experienced there Temps are between and degrees C OS and drivers are fully updated I m not entirely certain if BIOS is fully updated or not Any ideas on what the issue could be Do I need to look into a new power supply I m going to try replacing the CX M with the Silencer MkII W from my gaming computer Power Supply and Shut Down this weekend to see if that resolves the issues Specs Intel i - Stock cooler Asus P Z -V LK Rosewill Line Glow Only of the blue LED fans are installed WD Caviar Blue GB Crucial Ballistix GB Asus Blu-Ray CDD Corsair watt CX M Running Windows nbsp

A:Power Supply and Shut Down

A faulty PSU can cause serious damage to other components. My first advice is do not start this PC up again especially in light of the warnings you are receiving. If you know of anyone who has a multimeter to test this psu it please have them do so.

Corsair is known for their quality power supplies but even they can ship out faulty ones. Let us know how the switching of the psu works.
Relevancy 24.94%

HELLO.... im tracy I need help my toshiba satellite a215 has ydtuv is compressed and wont boot can u
Relevancy 20.64%

My apologies if this in the wrong area, it seemed right at the time.. My problem is, brand ned build roughly a week old.. When I hit the power switch nothing happens, I have to reach around and flip the PSU switch on and on again, then hit the power button and it starts up just fine. A friend mentioned it could be a short, or a grounding pen somewhere interfering. But as I've never seen a problem like this, I can't diagnosis it on my own.

Case: Cooler Master 932 HAF
Mobo: Sabertooth Z77
PSU: Corsair HX850

A:Power Switch not working right

Hey Mogymog. Does this happen every time you turn on the pc or is it an intermittent but frequent problem?. I assume you already checked the power switch wiring to the mobo for a secure connection.
Relevancy 19.35%

Hi guys my name is karan . I just build my pc a couple of months back and while I'm playing a heavy game on it always restarts and show this error I dont know what to do pls guys help me my pc specs are -
amd fx 4100 3.6 ghz
asus m5a78l-m-lx v2 motherboard
4gb ram
amd radeon hd 6670 2 gb ddr3
500gb hdd
iball 400 watt psu (got free with my iball cabinet) , pls guys help me

A:Asus anti-surge is triggered to protect computer from unstable power supply

SURGE is normally associated with an increase in line voltage and that can be deadly to the PS and other components.

A DROP-OUT is when A/C voltage goes below minimum and this can effect the system too.

If power is poorly regulated (ie it fluctuates periodically), I would get a UPS to condition the power better. I have two: one for the computer equipment and another for my large LED tv.

You can get a cheap multi-meter to measure and monitor the voltage visually and then when you get the error, glance to confirm - - is it hi or low?

Personally, with only 400w PSU and your gaming environment, I would suspect you are stressing the PSU to its limit when gaming.
Relevancy 23.65%

I got this laptop in for repairs recently and it has been a very tricky one I already told the client that I don t think it can be fixed but my curiosity has driven me to keep working on it This system came in unable to startup freezes during startup or said no boot device present I pulled the HDD out and scanned it from another computer Sure enough every error check would freeze around Note that I said freeze not display an error I would have to end task to close the windows drive check Chkdsk r from command prompt resulted in the same freezing partway through Disk copy and clone software would also freeze partway So during failure - drive after Toshiba Shuts OS install A305-S6898 off Satellite I copied the users files off manually and went to load a new Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure HDD in the laptop Every Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure time the OS install disk would load there would be Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure problems Sometimes it would freeze during the quot loading windows quot screen of the windows install Sometimes it would get to the install process and freeze right after selecting the disk to use Lately the most common problem is at variable points in the initial install loading process the system will just power cycle and restart At this point I ran memtest and found no errors Just the same I switched out the RAM and still it had problems I tried multiple different OS install disks and set bios back to defaults The problem persisted never being able to install a new OS I tried different hard drives external dvd drive and installing from a USB stick Oddly enough half of my repair utilities simply won t load things like seagate disk utilities paragon and acronis disk directors either freezing or giving weird errors like quot cd drive not present quot or quot memory not found quot The only thing that will run without freezing or restarting seems to be memtest which makes me think it s not an overheating issue since this can run for hours Frankly I m stumped It seems odd that the hard drive failed at the same time as whatever component is causing this problem so I assume either coincidence or some sort of drive controller failure that caused damage to the drive as well as making the system freeze while loading most any volume Any thoughts nbsp

A:Toshiba Satellite A305-S6898 - Shuts off during OS install after drive failure

Yeah, it may be a motherboard issue... Have you tried removing or resetting the CMOS battery?
Relevancy 20.21%

I have a Gateway, model ID49C. I bought it new about 3 years ago but replaced its battery less than a year ago.

This phenomenon has been happening for more than a year: When I plug in my computer to charge, sometimes the front power light (orange when charging) and the light for the power button start flashing in unison and the computer stops receiving charge. It immediately stops when I unplug the computer. This only seems to happen when the computer is open -- I can still fully charge it overnight. Lately it's started to happen so often that my computer can barely charge at all from the number of times I have to unplug it.

Does anyone know what's going on, or where I could look to find more info? Thanks for your help!

A:Gateway: Power light flashes when charging

Try another AC adapter...
Relevancy 20.21%

I have a Dell Dimension 5100 Desktop computer that the power supply recently went on so I replaced it and now the computer is not recognizing the CD/DVD drives?

When I first installed it and powered the computer on it said I had a Floppy Diskette Seek Failure . I don't have any floppy drives installed so I disabled it through the BIOS and now I noticed the drives aren't working . I have two drives installed one to play dvds and burn cds and the other is a dvd burner . Both of the drives power up and you can hear the disk spinning but nothing happens and the computer doest show I have them?

A:Installed New Power Supply / CD Drives not recognized

The old PSU may have taken out the motherboard when it fried - fairly common, especially with the cheap O.E.M. units used by Dell. Also, some Dell boards are proprietary, which means the connectors may not be standard ATX - Check the pinout on the 24 pin ATX connector to make sure it matches on both PSUs.
Relevancy 20.21%

Has anybody got a serviceable Power Lead which connects mains adaptor model ac-v315 to base of Sony CCD-TR3300E Hi8 Camcorder and which is no longer required. No longer available from Sony.
Relevancy 20.64%

Hi, I'm thinking about upgrading from 2 Crossfired 7970's to Quad 7970s, I'm currently running a XFX 1050w Power supply so I know I will have to upgrade to a bigger one, So I'm just wondering what size to go on the psu to safety run them all and the rest of my rig. Thanks alot!

A:Quad 7970's How much Power?

this is an average power consumption of a radeon 7970

u have to take count not only the graphics cards here though all ur system specs should be listed down if possible and if ur running an overclock it would help better

but judgeing by the cards it would add up already to a 1300w alone

+ might I ask what u need quad 7970s for I feel like 2 is enough overkill already
Relevancy 20.64%

Good day,

Okay to start things off my laptop is an ASUS N61J series model and it's been with me for about 3-4 years now.

The problem is that one day when I plugged my laptop to the charger the power just won't go in to my laptop. The charger is working fine and I was able to use my laptop via battery life.

I got it repaired at a local laptop repair center and they said that the BIOS IC (what they particularly said at the work performed is "Reseal/Reset BIOS IC").

So my question is what excatly happened to my laptop? Like:
1) What caused this problem
2) How did the shop excatly fix the problem just in case it happens again I would know what to do

Thanks in advance!

A:Laptop Power Problem

I think they're referring to the BIOS integrated controller. This controls basic functions of your laptop, outside of Windows.

From the description, it sounds like they opened up your laptop and 'reset the BIOS' - that is, remove the small button battery out of it, to force it to reset.

I don't know how that would help you charger problems.
Relevancy 20.64%

Trying to see if I can swap a Radeon 5830 for a 5850 but need to know if it uses 6pin connectors or 8pins because the 5850 used 8pins

A:What power connectors does a 5830 use?

Radeon 5830 needs two 6-pin connectors. That's the AMD reference card anways, what make/model are you looking at?

I think Asus uses a 6 pin AND an 8 pin, as an example, so you have to check the makers specs for the individual card.
Relevancy 21.07%

I have an Asus EeePc 1015PED which cannot power on when I press the power on button. The laptop starts up for about 1 second then dies. How can I tell if this is a motherboard problem? Tried it without battery but also encounters same issue.

A:Laptop cannot power on

Try different power supply (can be hard) and also try reseating the RAM if possible.
Relevancy 29.24%

There is a flashing line or something at the top 1/8 of the screen on my Inspiron E1505. This usually comes out only when I'm watching videos online, like on youtube. However the weird thing is it doesn't happen at all when I watch videos I downloaded and watch with windows media player home edition. Can anyone help?

A:Really weird flashing line laptop screen problem

What version of Windows are you running?
Relevancy 20.21%

Can anybody Help Me !!

I have set up a Server type machine on a HP Touchsmart running Vista

I have purchased a Seagate 2TB Expansion Drive with its own power source

I desperately want to know how this external drive can be seen by other devices on the network

I have other external drives with their own power supply and non of them can be accessed by other computers on the network....Is there a trick to these devices!!!

I have external hard drives with NO power supply just USB connection and I can access them from any computer on the network and any media device on the network

I'm not very technical and would like to know if its just the type of device and I should be buying usb connected hard drives for music and movies

A:External Expansion Drive with own power supply

You need a router that has a USB connection. Then you can connect the external storage to the network. That is only for a USB drive though. Do you have one of those passport drives with a battery?
Relevancy 29.24%

Thanks,..this laptop acer Aspire 4551 start but the display stay black (no video) I'd like to flash the bios,... I've seen some videos but I don't understand very well ,...could you to teach how to do ? step by step please......GOD BLESS YOU

A:Flashing Acer Aspire 4551 BIOS

Well, can you even boot up into the machine? Or is it all black?
Relevancy 19.78%

Late night I was in bed then I shock Static button... mobo case power fried? remembered that I needed to pay a bill that was due the next day So I jump out of bed and right to my PC I reach for the power Static shock case power button... mobo fried? button with my static charged finger unawares and get a shocking surprise I didnt actually press the button but the PC fired up anyway only to power down seconds later So I ground myself too late and press the power button Nothing no response Next I open the case and press the power button on the mobo no response The power and reset button on the mobo are lit up btw So then I unplug my power cord from the psu wait for the pc to drain completely then plug the cord back in Right when I plug the power cord back in the pc fires up then dies seconds later I ve tried -shorting out the battery -resetting cmos -screwdriver to the case power pin -bench test All with the same result Heres my hardware CASE Thermaltake MK-I Chaser CPU Intel Core i k GHz GPU EVGA GeForce GTX GB MOBO Asus P Z V PRO GEN MEM Corsair Vengeance GB DDR - x SSD Crucial M GB HDD Western Digital Caviar Black TB Windows Home Dont know what to do next I bought everything in February of so everything should be under warranty if qualified Thanks in advance nbsp

A:Static shock case power button... mobo fried?

Sounds like you've fried something important. You could probably try getting an RMA on the board, but they might realize what has happened.

I feel for you bro. I did a similar thing with a motherboard not too long ago.
Relevancy 20.64%

It's some computer speakers my boss gave me. They got dropped, or in some way physically abused. Go figure. Her computer has no built in speakers, so they're the only way for her to make sound. I checked it with headphones and the computer works fine. The LED won't light up when I hit the power button. I looked for a bad connection but found nothing of the sort. It simply won't turn on. The power button itself is loose, it looked like it was just glued to the board. I tried holding it in place with my hand and pushing it down, still no luck. Any advice?

A:Speaker got dropped, now it gets no power

Some electrical component either broke or got dislodged when the speakers fell. If you don't know about that kind of stuff and aren't prepared to spend hours Googling and slowly disassembling the speaker.. you're probably out of luck.
Relevancy 21.07%

I have a Toshiba netbook nb505, about a week ago my son knocked it off the end table. About 20mins later I received the "blue screen error". I had to hold down power button to completely shut down, from that moment it has not powered back up. When the power button is pressed, the green power light comes on, and the fan begins running (for only a few seconds), then nothing (display never powers on at all). Knowing enough about computer to get myself in trouble, I have tried a few things. The same thing happen with or without battery installed, or ac connected. I tried taking out battery, unplugging ac and holding power for 30secs, nothing. I finally decided it was the motherboard and replaced it. Then to my chagrin, the exact same issue. I am dumbfounded (my next guess is the cmos battery), any ideas would be greatly appreciated.

A:Netbook won't power on

You replaced the motherboard yourself, but you now think it's the CMOS battery (which should be on the new motherboard too). What?

Something isn't right.

Try taking out the HDD, reseating the RAM sticks too.
Relevancy 24.51%

Hello folks I have the exact same problem - with my satellite L D-S I am quite sure that the hdd is still ok and the ram is too Upon power on the power light turns on hdd spins up the hdd light flickers a little then it does nothing No backlight no image no error beeps either Quite disappointing as it was in sleep mode and it started doing this when I woke it up Never had a problem with it except for a loose solder connection on the power jack which I fixed about a year ago I am an electrical engineering student so I like to get some experience trying to fix this The computer is about years old phenom II triple core cpu g of memory g hdd and some sort of radeon graphics chip Worse case the graphics chip could be dead No video output from external monitor connector If you need more info I will gladly share it BTW the cpu gpu heatsink warms up as usual and the fan runs too VERY puzzling Cheers -Ben nbsp

A:Toshiba Satellite L645D-S4056 no display

The motherboard (GPU chip) is bad. The motherboard will have to be replaced. They are available on EBay usually for way under $150 daily
Relevancy 19.78%


my laptop is a packard bell dot (same as the acer aspire one zg5) equipped with a hannstar j mv-4 94v, I disassembled it to fix a wireless module problem, then when I assembled it back and put on the battery the power and charge leds flash for a second and nothing happens when I try to power it on.
same reaction happens when I plug on the power supply or put on the battery.
even the battery doesn't seem to charge anymore (its indicator just flashes for a second as I said)

here's a video:

any help or suggestion?


A:Dead netbook except leds flash once when power supply plugged

One of the ribbon cables may not be securely connected. Them things are a pain to deal with.

If you hadn't previously worked on it, I was going to suggest the power supply may have gone bad. Since you worked on it and that is when the problem started, its been my experience the problem is nearly always workers error.
Relevancy 20.64%

Swapped out the older ASUS motherboard when it apparently died - was also told that by a repair shop A sympathetic person donated his quot old quot ASUS P WD complete with PCU and RAM and heat sink for the cost of shipping so went to work He said he had upgraded to a more powerful setup and that this all worked when he removed it and stored it I had upgraded the power supply a few years ago to an ULTRA d watt when I added a couple Replacement up won't power motherboard drives and it always seemed to work I printed out the instruction manual for the P and not having done a lot of work on PC s for some years other than adding drives etc followed it very closely The plugs from the case were labeled so I m pretty sure I got the power amp interrupt switches case lights and fans etc all hooked up right Also the main cable to the board from the power supply and a secondary power supply cable to a socket near the CPU Also got the C drive EIDE and the additional SATA drives hooked up to the board and Replacement motherboard won't power up to the power supply and believe I have them right Maybe a question on the C drive There a set of sockets for EIDE drives incl one designated as a Primary and another Primary socket for an Replacement motherboard won't power up IDE drive If I recall my C drive is an EIDE so I should have connected to the right socket on the board Even if not shouldn t the CPU and case lights and fans power up When the big moment came to hit the switch it was an anti-climax Nothing happened The only sign of life is the green power LED on the board no CPU fan or anything No case lights or fans either I checked all the connections I mentioned and believe I have them right Being there s virtually no sign of life other than the green LED power light when I switch on the power supply could it be the power supply may have been the problem the whole time How can I test it - I have a digital meter Thanks for any ideas nbsp

A:Replacement motherboard won't power up

Short the 2 power switch pins on the motherboard with a screwdriver.
Relevancy 19.78%

I have a HP LaserJet Earlier this week I was using my laptop with a phone and an external hard drive both connected to the laptop HP power printer 2430 since error surge will USB LaserJet print not through USB connectors However when I connected the HP LaserJet using a printer cable with HP LaserJet 2430 printer will not print since USB power surge error a USB connector I received a message that said USB Power Surge Error or something similar Since then I have not been able to print I bought a new printer cable and it still does not work I ve been able to use the USB port on the laptop by connecting other items and they work fine so that s not the problem I am able to use the Menu button on the Printer to print out the Printer Info such as configuration page usage page etc However I can not get the Printer to work via a Printer Cable I keep receiving an error that says This document failed to print Is it possible the port which accepts the cable on the printer is damaged My family uses this printer on a daily basis Any assistance with this issue will be greatly appreciated Thanks Rachel nbsp

A:HP LaserJet 2430 printer will not print since USB power surge error

I forgot to add that the printer previously worked using this USB Printer Cable for years prior to this.

I'm still looking for help on this. If anyone has any knowledge regarding this, PLEASE let me know.
Relevancy 24.51%

I have a Toshiba Satellite E205, Win 7. A small icon with a picture of the touchpad keeps appearing in the middle of my screen, quickly followed by a similar one, but with a red circle. The mouse or touchpad then freezes briefly. By looking in Task Manager, Processes, I see that this is accompanied by the appearance of touchpadED.exe, which then disappears from processes. I think it started when I unplugged a USB hub with mouse and keyboard from my computer while it was still on. I removed and reinstalled the Synaptics Touchpad driver from Toshiba, ran virus scan and malware software, and cannot stop the process in Task Manager. How can I get rid of this problem??

A:Toshiba Satellite E205 touchpad issues

Try installing this: It may fail since Toshiba has very bad support for drivers coming from manufacturers.
Relevancy 24.51%

I Have Problem With My Laptop Display "Toshiba Satellite L645D-S4056"
The LCD did not display anything, I try to change with new lcd it still won't display anything,
please help me how iam suppose todo ? thanks
Relevancy 20.64%

My Acer Aspire 7750G stops charging after a little time playing games. The laptop turns the charging on and off fast one time, then after a little while after stops charging until i manually replug the powercord (pull it out then in again).
When it stops carging the power and battery lights blinks continuously along with the on/off button, even after i shut the laptop off. The only thing that resets it is replugging the power cord. The laptop is not very varm, but it does seem to happen when the cooling fan starts working hard.
Any idea what may cause this?

A:Problem with power supply


Hi. I have same model, same spec. I spoke with acer ppl and they said that is soft issue??!!!! Soft my ar.. How software can cause that laptop is disconnecting and all lights on/off, hdd, processor light is flashing!!! ????? I rang different acer support in different country and they've said they know the issue and it may be either mother board or graf card. Now my 1000e worth laptop is on his way to acer service in the uk. I'll keep u updated once I'll get more info. Regards
Relevancy 20.64%

Hi all, I have monitor gericom 2030 and it has some power board model that I cant find on sell, so I have buy one that is almost same with it. 4 plugs for invetors are same but one connection for t-con board is diffrent and on oroginal board I have pins (5V, 5v, GND, GND, 12v, BL, N/F) and on board that I have buy has ( 12v, 12v, GND, GND, 5v, 5v, GND, N.C, ON, DIM, MS ) So any suggests wich on wich one I should connect?
Relevancy 20.64%

I got this older computer I built just recently and when I power on the computer it turns on then off then right back on and I gotta say that this is the first time I seen this happen before. It has an ASUS mobo and there are no issues as far as I can tell and I think I tried the PSU in another computer and it was fine so I am not sure what would cause this? Any ideas why this would be happening? Thanks.

A:Computer power issue

Few things I can think of 1 take cmos battery out and replace it 2 check bios settings (default settings ) then depending how many sticks of ram u got take them out and put 1 at a time and see if problem still happens
Relevancy 21.07%

HardDrive Western Digital WD Blue WD AAKX GB RPM need? power What I supply do MB Cache SATA Gb s quot Internal Hard Drive -Bare http www newegg What power supply do I need? com Product Product aspx Item N E MOBA GIGABYTE GA- A-D AM AMD SATA Gb s USB ATX AMD Motherboard http www newegg com Product Product aspx Item N E Processor AMD Phenom II X Black Edition Deneb GHz Socket AM W Quad-Core Processor HDZ FBGMBOX http www newegg com Product Product aspx Item N E GRAPHICS CARD ASUS HD - GD -V AMD Radeon HD VGA GB GDDR Graphics Card http www amazon com gp product B RFYEQW ref ox sc act title ie UTF amp psc amp smid ATVPDKIKX DER RAM CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C http www newegg com Product Product aspx Item N E Monitor ASUS VS Series VS H-P Black quot ms HDMI LED Backlight Widescreen LCD Monitor cd m ASCR http www newegg com Product Product aspx Item N E DVD DRIVE ASUS X DVD Burner - Bulk X DVD R X DVD RW X DVD R DL X DVD-R X DVD-RW X DVD-ROM X CD-R X CD-RW X CD-ROM Black SATA Model DRW- B ST BLK B AS OEM http www newegg com Product Product aspx Item N E Can someone let me know how many watts I need to run this nbsp

A:What power supply do I need?

A quick check with an online power calculator gave me 300W

Basically, you don't need a whole lot, which is good, because you can focus on quality.

If your on a tight budget, an Antec NEO ECO 520C is about as cheap as you will want to get. Anything cheaper puts your components at risk, and is extremely inefficient. If you have some more cash, get a SeaSonic G Series 550W. The SeaSonic may actually save you money, as it will waste less power.
Relevancy 20.64%

A friend dropped it off the other day asking me to see if it worked. After looking it over for several minutes, I noticed no power cord. I tried googling to see if I could get more info but came up blank.
Its a Polaroid, model # FLM-2017
Pictures are attached

This one shows the pc/cable/power. If somebody can help me find out the cost of a power cord, I'd appreciate it.
If not, I'm taking the speakers out of it for use elsewhere. Thank you.

A:Polaroid monitor no power cord
Relevancy 20.64%

I have a hp pavilion dv4 with 4gb ram and windows vista and it won't boot under battery power even though when I boot it up with ac power it says the battery is fully charged.

A:Battery power boot up problem

How old is the HP? If its been a few years since you bought it, you might try re calibrating the battery from the BIOS, most HP and Gateway computers have a utility inside the BIOS for calibrating the battery. If not, let me know and I'll see if I can find one.
Relevancy 20.21%

Have the Dell XPS 420 computer and wanted to finally upgrade the Video card and figured I need to upgrade the low Power Supply too.

Computer right now has:
You Have: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
You Have: GeForce 9800 GT
Think Power Supply is 375 watt
Windows 7
4gigs of Ram.

Heard from others that my CPU will be a bottleneck for newer Video Cards so I honestly dont know where to start. Not sure how to figure if 1 video card is better than another one.

And likely need a bigger powersupply to run whatever new video card I get too. And need to get something that will fit in my dell case.

Just started playing Metro 2033 and playing it on High but course want to play it on Very High with any screen tear and slow down and of course other games as well.

A:Upgrade Dell XPS 420 video card and power supply

gchfamily said:

Heard from others that my CPU will be a bottleneck for newer Video Cards so I honestly dont know where to start. Not sure how to figure if 1 video card is better than another one.Click to expand...

Maybe so but that shouldn't stop you from getting a better GPU than the one you currently have. Depending on the game you play (non-CPU dependent) there will be plenty of GPU upgrade room with a Q6600.

From what I can tell Metro 2033 is not a CPU dependent game.
Relevancy 24.51%

Laptop won't boot. Put in installation disc in CD drive. System won't boot to CD rom. I removed the HDD, put CD in drive, it boots to CD ROM. Reinsert HDD, plug in power, no boot to splash screen or allowing access to bios. Remove HDD, boots to CD ROM...

I don't understand why it won't boot to CD with disc inserted. It should boot up to CD regardless since it is first in boot order.

Disregard specs below. It's Toshiba Satellite A665 Laptop.

A:Toshiba Satellite A665 laptop won't boot

Update: I had suspected the HDD was bad. The OS did finally boot. It cannot find a HDD. Can you say Newegg?

First and last Toshiba for me.