Windows Support Forum

BSOD ntoskrnl.exe new computer built!

Q: BSOD ntoskrnl.exe new computer built!

Hello, i have been running into some of these problems with ntoskrnl.exe

MEMORY_MANAGEMENT
DRIVER_OVERRAN_STACK_BUFFER
IRQL_NOT_LESS_OR_EQUAL

I cannot seem to figure out what is wrong and i have updated all my drivers!

Dumps.zip

Relevancy 100%
Preferred Solution: BSOD ntoskrnl.exe new computer built!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD ntoskrnl.exe new computer built!

BSOD Posting Instructions

http://www.tenforums.com/bsod-crashes-debugging/59247-bsod-ntoskrnl-exe-new-computer-built.html
Relevancy 82.13%

I recently built a computer and am getting BSOD's on a relatively frequent basis After checking around I have no idea what the problem could be This is the first build I have ever done Here is what I know Using WhoCrashed it tells me built new on computer. to custom BSOD ntoskrnl.exe Related that in crashes it was related to ntoskrnl exe and in the th is BSOD on new custom built computer. Related to ntoskrnl.exe was related to ntkrnlmp exe The BSOD's are not recurring that is I will get one then go back and do the same thing I was doing before and it will be fine About a day after installing everything my integrated wi-fi card stopped working I shrugged it off to a faulty antennae and went and got a Netgear WNDA v Wireless dual band adapter it is faster and holds a signal better anyways Not sure if it is related to the BSOD's Any other questions feel free to ask attached are the dump files and system health report as required by the forum as well as the screen shot of the WhoCrashed report For system specs look at my profile or feel free to ask Thanks EDIT Also forgot to BSOD on new custom built computer. Related to ntoskrnl.exe add that I am running Windows -bit and it is an OEM everything was installed in the past - days when I took them out of the box and this is the only OS I have installed on the system Also I tried to run the windows repair program of the OS disc and it was not compatible not sure if that is due to OEM or related to the problem

A:BSOD on new custom built computer. Related to ntoskrnl.exe

PROBLEM DEVICES

Code:
Atheros AR9485 Wireless Network Adapter PCI\VEN_168C&DEV_0032&SUBSYS_850D1043&REV_01\4&299066B9&0&00E6 This device is disabled.
PCI Simple Communications Controller PCI\VEN_8086&DEV_1E3A&SUBSYS_84CA1043&REV_04\3&11583659&0&B0 The drivers for this device are not installed.
You will either need to uninstall these drivers and then install the latest version or perform a clean installation of them.
DRIVERS
The following drivers need to be updated:


Code:
hamachi.sys Thu Feb 19 21:36:41 2009
These drivers can be found by searching them in Google and then finding the associated software or driver. Finally, find the latest version of this driver or software and download and install it. Some of the drivers may also be found here (if the driver says 'Windows Update' simply make sure all Windows Updates are installed).

You should also update any other drivers you can think of including graphics, audio, chipset, SSD etc.
SOFTWARE
You have Norton installed, is that correct? At least to test, uninstall it and install MSE (Microsoft Security Essentials) instead.
Microsoft Security Essentials - Free Antivirus for Windows

Please also uninstall any other Symantec products you have including Endpoint and Ghost as some of your dumps point toward Symantec drivers.
HARDWARE
Run a chkdsk on the system partition to check for bad sectors or system errors.
Disk Check

http://www.sevenforums.com/bsod-help-support/239540-bsod-new-custom-built-computer-related-ntoskrnl-exe.html
Relevancy 69.66%

Basically my machine has been randomly popping BSODs in my face for about a week now It seems to be networking related it Built Issues BSOD, Machine ntoskrnl.exe, Self always seems to pop up when i'm transferring large files over the college network to friends I looked into it a little further and while i have no idea how to get the long error code out of it i walked away while the file transfer was in progress even with my limited knowledge of the matter i managed to find the minidump file BSOD, ntoskrnl.exe, Self Built Machine Issues from my last encounter with that frustrating color with the help of google I also found a bit version of debugging tools and opened the dump file with BSOD, ntoskrnl.exe, Self Built Machine Issues it the bottom of wich says quot Probably caused by ntoskrnl exe nt quot I'll attach both a text with what debugging tools spat and the minidump Unfortunately i ran CCleaner before i knew that it ate dump files when it cleans so i only have the most recent dump I've heard a bit of talk about this being a sp error but i figured i would ask some people with a little more knowledge on this subject before i acted Anyways system specs Ram g of ddr Corsair Dominator Fully Memtest Tested Processor Intel Quad core Motherboard ASUS P Q Pro Graphics HIS g ATI Both of my hard drives are old generic ones i didn't upgrade them from my old machine both i have run check disk on for bad sectors I have a Rosewill W PSU I bought the bits and peices about a month and a half ago put them together and ran all my stress tests and hardware checks then the system ran like a dream until about a week ago when i was transfering about g of stuff over the school network

A:BSOD, ntoskrnl.exe, Self Built Machine Issues

hate to do it, but bump... Anyone have any idea at all?

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-self-built-machine-issues-324687.html
Relevancy 69.23%

Hey everyone, this is my first time here so i hope i did this correct.

I built this computer about a week ago and ive gotten 3 BSOD?s at seemingly random times

BSOD 1 and 3 happend when the system was under some load, (1) playing League of legends and (3) Playing Minecraft.

The 2 one happend while the system was "IDLEing" i wasn't doing anything intensive, but i had Firefox, Chrome, Skype and probably some other program open in the background.

I noticed that ntoskrnl.exe was part of all the BSOD?s.

I haven't done any done any memory tests yet.
Ive done some tests on the SSD, chkdsk and a SFC scan no errors reported

Ive had some problem getting all the Asus chipset drivers installed and are instead using the ones from windows/windows update.

Hope this is enuff information for now.

EDIT - I ran Memtest86 for about 10hrs and it passed with no errors.

//Andreas

A:New Built PC BSODīs at seemingly random times (ntoskrnl.exe)

  
Quote: Originally Posted by thespeedmaster


Hey everyone, this is my first time here so i hope i did this correct.

I built this computer about a week ago and ive gotten 3 BSOD?s at seemingly random times

BSOD 1 and 3 happend when the system was under some load, (1) playing League of legends and (3) Playing Minecraft.

The 2 one happend while the system was "IDLEing" i wasn't doing anything intensive, but i had Firefox, Chrome, Skype and probably some other program open in the background.

I noticed that ntoskrnl.exe was part of all the BSOD?s.

I haven't done any done any memory tests yet.
Ive done some tests on the SSD, chkdsk and a SFC scan no errors reported

Ive had some problem getting all the Asus chipset drivers installed and are instead using the ones from windows/windows update.

Hope this is enuff information for now.

EDIT - I ran Memtest86 for about 10hrs and it passed with no errors.

//Andreas


Hello Andreas,

Seems like the crashes might be caused by AsIO.sys i.e. ASUS Probe. You need to uninstall them from Programs and Features. Infact uninstall all the Asus Utilities except the drivers. Also other issue with VirtuWDDM.sys i.e. Virtu MVP so I would recommend to reinstall it.

Updated your SSD Firmware lot of occasion an out dated firmware could cause BSOD.

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\080512-34835-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Aug 5 03:38:20.367 2012 (GMT+5)
System Uptime: 0 days 9:59:58.163
BugCheck 19, {20, fffffa80111d8e30, fffffa80111d9250, 4420045}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!FsRtlUninitializeOplock+309 )
BUGCHECK_STR: 0x19_20
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x19_20_nt!FsRtlUninitializeOplock+309
Bugcheck code 00000019
Arguments 00000000`00000020 fffffa80`111d8e30 fffffa80`111d9250 00000000`04420045
BiosVersion = 1205
BiosReleaseDate = 06/01/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
MaxSpeed: 3400
CurrentSpeed: 3417
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\080312-20217-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Fri Aug 3 22:20:50.096 2012 (GMT+6)
System Uptime: 0 days 4:04:08.892
BugCheck 1E, {ffffffffc0000005, fffff80002e66954, ffffffffffffffff, 0}
*** WARNING: Unable to verify timestamp for AsIO.sys
*** ERROR: Module load completed but symbols could not be loaded for AsIO.sys
Probably caused by : AsIO.sys ( AsIO+1868 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: atkexComSvc.ex
FAILURE_BUCKET_ID: X64_0x1E_AsIO+1868
Bugcheck code 0000001E
Arguments ffffffff`c0000005 fffff800`02e66954 ffffffff`ffffffff 00000000`00000000
BiosVersion = 1205
BiosReleaseDate = 06/01/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
MaxSpeed: 3400
CurrentSpeed: 3417
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\080112-22042-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Wed Aug 1 23:31:24.784 2012 (GMT+5)
System Uptime: 0 days 1:10:05.581
BugCheck 3B, {c0000005, fffff8800437b758, fffff88009a8c790, 0}
Probably caused by : VirtuWDDM.sys ( VirtuWDDM+4758 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: arma2oa.exe
FAILURE_BUCKET_ID: X64_0x3B_VirtuWDDM+4758
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff880`0437b758 fffff880`09a8c790 00000000`00000000
BiosVersion = 1205
Bi... Read more

http://www.sevenforums.com/bsod-help-support/244671-new-built-pc-bsod-s-seemingly-random-times-ntoskrnl-exe.html
Relevancy 69.23%

Hello, I am currently experiencing BSOD usually while under load playing CS:GO or WildStar (crashes occur instantly or after a few hours) and I will upload the .dmp files.

-I've tried resetting CMOS as I was previously overclocked.
-I've tried running Memtest to diagnose ram (both sticks were tested separately for ~4 hours)
-I've tried reinstalling Nvidia drivers
-I've tried moving anything plugged into USB 3.0 to 2.0 ports
-I've ran sfc /scannow everything checks out
-I've run any windows updates (Including optional updates)

Any other suggestions would be very helpful.

Thanks in advance!

A:Custom Built PC BSOD Randomly ntoskrnl.exe+72a40

i have the same bsod but not while playing games, only happened once while watching youtube and browsing on firefox.
btw have you ran test on your gpu yet? and hardware temp all normal?hdd healthy?

http://www.sevenforums.com/bsod-help-support/367955-custom-built-pc-bsod-randomly-ntoskrnl-exe-72a40.html
Relevancy 58.91%

bit full retail Hardware is month old built myself OS was installed when I built it from a USB drive did not include an optical drive in the build SPECS i k ATI GPU corsair tx PSU ASRock Extreme Gen motherboard Corsair vengance ddr ram x gb Coolermaster hyper cooling unit gb Western Digital HD gb Crucial M ssd OS is installed on this drive It was working fine the first weeks I had the build then I went on a vacation for a week I come back and the thing BSODs on me times in an hour and a half First thing I tried was setting clocks back to normal was at ghz on the i BSOD Self included) built computer. (BSOD semi-randomly. dump.zip went back down to ghz and it was stable for like BSOD semi-randomly. Self built computer. (BSOD dump.zip included) minutes after I did that but it then crashed again Also did a memory diagnostic test BSOD semi-randomly. Self built computer. (BSOD dump.zip included) and everything was supposedly good My max temps with prime now are like degrees celsius with RealTemp because I have the coolermaster hyper as opposed to the stock cooler so it shouldnt be crashing due to over heating Also first crash occured firing up minecraft Thanks for any and all help guys

A:BSOD semi-randomly. Self built computer. (BSOD dump.zip included)

Quote:
Also did a memory diagnostic test and everything was supposedly good.


Using which tool/software? You should run Memtes86+ for at least 7 Passes (Test each RAM stick individually)
RAM - Test with Memtest86+
Your BSODs are RAM/Memory related, rest your RAM settings to their default values in your BIOS. Stop any overclocking if any.

Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.
Note that this test may overheat the CPU, ensure proper cooling.

Post back with your results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CACHE_MANAGER (34)
See the comment for FAT_FILE_SYSTEM (0x23)
Arguments:
Arg1: 0000000000050853
Arg2: fffff88018cbc7a8
Arg3: fffff88018cbc000
Arg4: fffff80001ede67c

Debugging Details:
------------------
EXCEPTION_RECORD: fffff88018cbc7a8 -- (.exr 0xfffff88018cbc7a8)
ExceptionAddress: fffff80001ede67c (nt!CcLazyWriteScan+0x0000000000000188)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT: fffff88018cbc000 -- (.cxr 0xfffff88018cbc000)
rax=0000000000240000 rbx=0000000000000000 rcx=fffff80002097940
rdx=0000000000000000 rsi=ffff6a8009de4390 rdi=0000000000000000
rip=fffff80001ede67c rsp=fffff88018cbc9e0 rbp=fffff80002036280
r8=fffff88001e5e840 r9=0000000000000000 r10=fffffa800790be30
r11=0000000000000002 r12=0000000000000001 r13=0000000000000000
r14=fffffa8009e313b0 r15=ffff6a8009de4418
iopl=0 nv up ei ng nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010282
nt!CcLazyWriteScan+0x188:
fffff800`01ede67c 488b4e60 mov rcx,qword ptr [rsi+60h] ds:002b:ffff6a80`09de43f0=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800020c8100
ffffffffffffffff

FOLLOWUP_IP:
nt!CcLazyWriteScan+188
fffff800`01ede67c 488b4e60 mov rcx,qword ptr [rsi+60h]

FAULTING_IP:
nt!CcLazyWriteScan+188
fffff800`01ede67c 488b4e60 mov rcx,qword ptr [rsi+60h]

BUGCHECK_STR: 0x34

LAST_CONTROL_TRANSFER: from fffff80001ede189 to fffff80001ede67c

STACK_TEXT:
fffff880`18cbc9e0 fffff800`01ede189 : fffff880`000000c5 fffffa80`00000000 00000000`00000000 ffff6a80`09de4390 : nt!CcLazyWriteScan+0x188
fffff880`18cbcac0 fffff800`01ea2841 : fffffa80`07909570 fffff800`0218b601 fffff800`020978c0 00000000`00000002 : nt!CcWorkerThread+0x1f9
fffff880`18cbcb70 fffff800`0212fe6a : 00000000`00000000 fffffa80`09813b50 00000000`00000080 fffffa80`078ea040 : nt!ExpWorkerThread+0x111
fffff880`18cbcc00 fffff800`01e89ec6 : fffff880`01ed0180 fffffa80`09813b50 fffffa80`078f9b50 00000000`00000202 : nt!PspSystemThreadStartup+0x5a
fffff880`18cbcc40 00000000`00000000 : fffff880`18cbd000 fffff880`18cb7000 fffff880`18cbc8a0 00000000`00000000 : nt!KxStartSystemThread+0x16
SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: nt!CcLazyWriteScan+188

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.e... Read more

http://www.sevenforums.com/bsod-help-support/237942-bsod-semi-randomly-self-built-computer-bsod-dump-zip-included.html
Relevancy 57.19%

Hello BSOD new on built computer I recently just built my computer over the weekend first build and everything has been fine since Sunday I have updated the mobo chipset lan usb and audio drivers as well as the nvidia gpu driver I also updated the firmware on my SSD yesterday with no problems required firmware update to fix a bug So to my actual problem I tried installing the asus ai suite ii software for my mobo last night The install did not BSOD on new built computer work which seems to be a common problem in the internet community so there is a patcher file provided by asus to allow installation if you can t install BSOD on new built computer I installed the patcher I think it was very quick and no pop ups that I noticed and about minutes later BSOD on new built computer I have been getting BSOD saying Memory Management I saw folders were created in program files folder when I attempted to install the ai suite ii could not delete them so I went into safe mode and deleted them that way BSOD saying Memory Management still occurring When I boot my computer it s generally frozen at the beginning when windows opens and I noticed most of the services are stopped I ran system restore to try to fix the issue Did not work I m going to attempt to update my BIOS when I get home from work but beyond that I m really lost and could use some help probably on-site I am very new to building computers and my knowledge is extremely limited Here are my computer specs intel i k w coolermaster cpu cooler Evga gtx sc Asus sabertooth p mobo Gskill ripjaws x gb This RAM is rated for my cpu and is compatible with my mobo I installed correctly for dual channel and also passed windows memory test last night Also had the XMP setting enabled in my Asus bios disabled the XMP and still getting the BSOD Crucial gb ssd Win professional -bit OEM Also--I did call ASUS about the problem they told me to update BIOS but to be honest their tech support scares me did not seem knowledgable and told me quot look on youtube and stuff quot nbsp

Relevancy 57.19%

Hi all I am completely new to computers and really wanted to build a gaming PC I ended up purchasing the parts and had someone help me build it On the rd day of gaming on it I started to get random BSOD's They would go away for a week then come back and happen multiple times per day The whole thing has been really strange and built BSOD's since computer was frustrating Everyone I talked to suspected the memory to be the problem so I RMA'd it did not fix the problem I just want to get this fixed because I haven't been able to enjoy my PC since it was built over this I get to have some fun playing games but always know it is going to happen again I am new to the mini dump files and my question is do I have to download the debugging tools before I am able to post the dump files for BSOD's since computer was built you guys to look at My System Mobo MSI P A-GD B CPU Intel i ghz GPU GTX RAM GB Gskill Ripjaws HDD Western Digital TB Thermaltake Frio Cooler Asus DRW

A:BSOD's since computer was built

Not sure if this is how to upload my dump files or not...

http://www.sevenforums.com/bsod-help-support/168649-bsods-since-computer-built.html
Relevancy 57.19%

I built this PC a couple months ago and ever since I having random BSOD mostly while I play games i e SWTOR BF And once or twice while just web browsing Below I have attached the required information I took it to a buddy's house and it ran find for about mins but its hard to say cause that also happens to me where it will be fine for a period of time then built!!! just computer Help BSOD, was with it crashes Or it just crashed after a few mins It happens mostly when I am doing a few task at once as well MOBO Asus P Z -V CPU I K GPU NVIDIA Geforce GTX TI Core RAM CORSAIR Vengeance GB SSD Corsair Force Series GT GB HDD Seagate Help with BSOD, computer was just built!!! GB I think or something a friend gave to me PSU CORSAIR Professional Series HX OS Microsoft Windows Home Premium SP -bit - OEM Hopefully someone can give me a hand Thank you for your time

A:Help with BSOD, computer was just built!!!

Two issues

1-You have a driver from 2005 that is a HUGE cause of BSOD's in win 7 called RTCORE64.SYS, it is the msi afterburner driver (used in overclocking). It needs at least to be updated and if it cant it needs to be removed.

2-When that is removed your crashes are releated to a memory exception (Probably related to your DirectX) Please run the below tests to find which driver and test your memory.


* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these

- Concurrency Stress Test
- DDI compliance checking

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created. You did create a restore point didnt you?


Sysnative Forums

Using Driver Verifier (Windows Drivers)

http://www.sevenforums.com/bsod-help-support/224179-help-bsod-computer-just-built.html
Relevancy 57.19%

Hi, here recently i have built a new computer. Pretty much since i have had it i have random blue screens. I have updated the drivers on the chipset, bios, and etc. It seems to have helped a little but i still get blue screens pretty frequently. More often while playing games. Here is an attachement with my most recent BSOD's

? OS - Windows 7
? x64
? What was original installed OS on system: Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? - Full Retail

? Age of system (hardware) - New
? Age of OS installation - have you re-installed the OS? - Yes

? CPU - Intel i5-2500k
? Video Card - Radeon HD 6850
? MotherBoard - Asus P8H61-I
? Power Supply - 1 x Antec Earthwatts 500d Green 500W

Thanks for all the help

A:BSOD on new built computer

Looking at the last 6 they are not consistent which leans more towards hardware.

D/L Memtest+ burn it to a CD using a free program like Imgburn if you need one then boot from the CD to test the ram, let it run for at least 6 passes or until you see an error.

There are a couple drivers that should be updated.

Rt64win7.sys Wed Dec 29 06:44:36 2010>
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC>
Realtek


HECIx64.sys Tue Oct 19 19:33:43 2010>
Intel Management Engine Interface>
Intel? Driver Update Utility

This is probably a WD portable hard drive Vista era driver
wdcsam64.sys Wed Apr 16 04:39:08 2008>
Western Digital SCSI Arcitecture Model (SAM) WDM driver>
WD Support / Downloads / Select Product
BSOD BUGCHECK SUMMARY


Code:

Debug session time: Fri Oct 5 12:57:25.382 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\100612-14726-01.dmp]
System Uptime: 0 days 1:37:40.584
BugCheck 109, {a3a039d89bf456b5, b3b7465eee71260b, fffff80002cf64e7, 1}
Probably caused by : memory_corruption
Bugcheck code 00000109
Arguments a3a039d8`9bf456b5, Reserved b3b7465e`ee71260b, Reserved fffff800`02cf64e7, Failure type dependent information 00000000`00000001, Type of corrupted region, can be generic data region odification of a function or .pdata processor IDT processor GDT ype 1 process list corruption ype 2 process list corruption ebug routine modification ritical MSR modification
BUGCHECK_STR: 0x109
DEFAULT_BUCKET_ID: CODE_CORRUPTION
PROCESS_NAME: System
MaxSpeed: 3300
CurrentSpeed: 3292
BiosVersion = 0903
BiosReleaseDate = 06/29/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Fri Oct 5 11:18:29.813 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\100612-16239-01.dmp]
System Uptime: 0 days 7:45:06.015
BugCheck 3B, {c0000005, fffff8800481cd83, fffff88007a11f40, 0}
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::EndCPUAccess+33 )
Bugcheck code 0000003B
Arguments 00000000`c0000005, Exception code that caused the bugcheck fffff880`0481cd83, Address of the instruction which caused the bugcheck fffff880`07a11f40, Address of the context record for the exception that caused the bugcheck 00000000`00000000, zero.
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: Wow-64.exe
MaxSpeed: 3300
CurrentSpeed: 3292
BiosVersion = 0903
BiosReleaseDate = 06/29/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Sun Sep 2 05:09:12.289 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\090212-14601-01.dmp]
System Uptime: 0 days 1:01:42.492
BugCheck 50, {fffffa82084ddef0, 1, fffff80002ceca1e, 5}
Probably caused by : ntkrnlmp.exe ( nt!ObDereferenceObjectDeferDeleteWithTag+1e )
Bugcheck code 00000050
Arguments fffffa82`084ddef0, memory referenced. 00000000`00000001, value 0 = read operation, 1 = write operation. fffff800`02ceca1e, If non-zero, the instruction address which referenced the bad memory ss. 00000000`00000005, (reserved)
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
MaxSpeed: 3300
CurrentSpeed: 3292
BiosVersion = 0903
BiosReleaseDate = 06/29/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Tue Aug 28 01:43:02.923 2012 (UTC - 4:00)
Loading Dump File [C:\Users\Owner\Bsodapps\082812-16489-01.dmp]
System Uptime: 0 days 4:04:59.751
BugCheck 50, {fffffa8208f9a018, 1, fffff880052c1756, 5}
Probably caused by : dxgkrnl.sys ( dxgkrnl!DXGADAPTER::ReleaseReference+16 )
Bugcheck code 00000050
Arguments fffffa82`08f9a018, memory referenced... Read more

http://www.techsupportforum.com/forums/f299/bsod-on-new-built-computer-669233.html
Relevancy 57.19%

Hi I m looking for any advice and expertise please Built several getting computer new and BSOD I ve recently built my a Windows desktop and i m getting all kinds of blue screens I have tried doing a clean install i ve done a system restore since then to when it was working best and i ve still had BSOD Originally it kept BSOD when i had two sticks of RAM in at least once every min and worked fine when only one was in I ve Built new computer and getting several BSOD since done a clean install and have both in I Built new computer and getting several BSOD ve attached the dmp files from the two BSOD i ve had since i have done the clean install The only programs installed are Avast and the software to run the wireless dongle Netgear Built new computer and getting several BSOD WG v plus whatever came with Windows I ve ran dskchk and sfc scannow with no errors reported I ve ran memtest and that returned no errors though only ran once The motherboard has MemtestOK and that shows no errors Motherboard Asus M A T-V EVO USB the latest drivers for the chipset audio graphics lan and usb from the amd website have been installed THe drivers for the wireless mouse and keyboard are install as is for the wireless dongle The BIOS is the latest chipset as well Processor AMD Athlon tm II X Processor GHz gb of RAM Windows Ultimate x If you can help or if you need any more info that might help please let me know thanks Dan nbsp

Relevancy 57.19%

Hello I built my computer about weeks ago went all smooth and everything worked Installed Windows etc everything okay Did got a myself. I Computer built - BSOD BSOD once the same as described below but never occured anymore until today Now as i m typing this on my second computer everytime i boot up my pc it sometimes doesn t even boot windows BSOD - Computer I built myself. sometimes gives me a NO DATE DETECTED error and sometimes just gives me a black screen I had a few BSOD s before this more heavier errors occured I BSOD - Computer I built myself. don t know the exact errorcode but the first errorcode line was DRIVER IRQL not less or equal However I did manage to get it booted succesfully once which gave me the oppertunity to let windows give me some more information about the BSOD Problem Event Name BlueScreen OS Version LOCALE ID BBCode d BCP C BCP BCP BCP FFFFF D OS Version Service Pack Product quot Files that help to describe the problem quot C Windows Minidump - - dmp C Users User Appdata Local Temp WER- - sysdata xml BSOD - Computer I built myself. End of the report When I installed Windows I also installed a driver for my graphics card and my motherboard not sure though My friend also had problem he has the same motherboard as I do Replacing his RAM for a better more expensive one was the solution for him Thanks in advance Specs of the computer i m talking about nbsp

A:BSOD - Computer I built myself.

Check the specs on the memory.
You may need to set the memory voltage in the bois manually
to what the memory actually requires.
 

https://forums.techguy.org/threads/bsod-computer-i-built-myself.996121/
Relevancy 57.19%

Around days ago I just finished putting together my computer and since then I have had BSOD times twice while gaming and once while watching a movie I have no idea why they are happening here is the report windows gave me after it happened Problem I just BSOD! Help computer built keeps my having signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode Help my computer I just built keeps having BSOD! e BCP BCP C BCP BCP BFC OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Matt AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Anyone wondering here are my computer specs Processor AMD A K with integrated radeon D graphics Memory Mushkin Enhanced Silverline Stiletto GB X GB PC - DDR - - - - Dual Channel Memory Kit Motherboard Gigabyte A -UD H ATX FM Motherboard HDD Western Digital Caviar Blue GB MB Cache RPM IN SATA Internal Hard Drive OEM Powersupply Watt antec

A:Help my computer I just built keeps having BSOD!

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. If empty (or non existent) please look in the following folders. C:\windows (the dmp should be called memory.dmp), and C:\windows\LiveKernelReports\Watchdog.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/231047-help-my-computer-i-just-built-keeps-having-bsod.html
Relevancy 56.76%

I have had this computer for awhile, but recently it has been crashing unexpectedly. The system itself is a gaming system built by me last January, so I am suspecting a hardware problem.

The crashing always happens when I am playing games like TF2, Skyrim, or World of Warcraft, but not until recently games like Minecraft and Terraria.

Here is my system information as follows:
OS: Windows 7 Home Premium
x64
Original install is Windows 7
Full Retail Version
System age: 8 months
Age of OS: Also 8 months
CPU: Intel Pentium CPU G630 @ 2.7GHz
Video Card: VisionTek 2gb Radeon HD 7850 x16 PCI express
Motherboard: ASRock H77M
Power Supply: Cooler Master Extreme Power Plus 550w

To follow, I have the zip file of the system reports that you requested.

If there are any other files you need, please just submit a request, and I'll get right on it.

Hoping for a speedy fix,
ShadowDragonLord

A:BSOD Self-Built Computer Crashing

Hi,

We have various different bugchecks:

MEMORY_MANAGEMENT (1a)

BugCheck 1A, {41284, 85d8001, 3971, fffff70001080000}

1st parameter is 41284 which means that a PTE or the working set list is corrupt. I'm seeing a lot of DirectX Kernel calls on the stack.

SYSTEM_SERVICE_EXCEPTION (3b)

An exception happened while executing a routine that transitions from non-privileged code to privileged code.

Ensure you have the latest video card drivers. If you are already on the latest video card drivers, uninstall and install a version or a few versions behind the latest to ensure it's not a latest driver only issue. If you have already experimented with the latest video card driver and many previous versions, please give the beta driver for your card a try.

BugCheck 3B, {c0000005, fffff96000312a2d, fffff88008d51660, 0}

The first parameter of the bugcheck is c0000005 which is an access violation status code. An access violation is an attempt to access invalid memory.

If we run a .cxr on the 3rd parameter (address of the context record for the exception that caused the bugcheck), we get the following:


Code:

1: kd> .cxr 0xfffff88008d51660
rax=fffff88008d52088 rbx=0000000000000000 rcx=0000000000000000
rdx=fffff900c00bf010 rsi=fffff900c01ecae0 rdi=0000000000000000
rip=fffff96000312a2d rsp=fffff88008d52040 rbp=0000000000000001
r8=0000000000000018 r9=fffff88008d521e8 r10=0000000000000000
r11=fffff88008d521c8 r12=fffff900c1f46260 r13=fffff88008d521e8
r14=fffff900c00bf010 r15=fffff900c01ecae0
iopl=0 nv up ei ng nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010282
win32k!SFMLOGICALSURFACE::SetShape+0x1d:
fffff960`00312a2d 488b7160 mov rsi,qword ptr [rcx+60h] ds:002b:00000000`00000060=????????????????
Nothing I can personally see there that indicates the crash was caused by pool corruption. This implies possible memory or other hardware issues.

NTFS_FILE_SYSTEM (24)

This indicates that a problem occurred within Ntfs.sys (the driver file that allows the system to read and write to NTFS drives). Corruption in the NTFS file system or in blocks (sectors) on the hard disk can cause this error. Corrupted SCSI and EIDE drivers can also adversely affect the systems ability to read and write to disk, thus causing the error.

Chkdsk:
There are various ways to run Chkdsk~

Method 1:

Start > Search bar > Type cmd (right click run as admin to execute Elevated CMD)

Elevated CMD should now be opened, type the following:

chkdsk x: /r

x implies your drive letter, so if your hard drive in question is letter c, it would be:

chkdsk c: /r

Restart system and let chkdsk run.

Method 2:
Open the "Computer" window
Right-click on the drive in question
Select the "Tools" tab
In the Error-checking area, click <Check Now>.

If you'd like to get a log file that contains the chkdsk results, do the following:

Press Windows Key + R and type powershell.exe in the run box

Paste the following command and press enter afterwards:

get-winevent -FilterHashTable @{logname="Application"; id="1001"}| ?{$_.providername –match "wininit"} | fl timecreated, message | out-file Desktop\CHKDSKResults.txt

This will output a .txt file on your Desktop containing the results of the chkdsk.

If chkdsk turns out okay, run Seatools -

SeaTools | Seagate

You can run it via Windows or DOS. Do note that the only difference is simply the environment you're running it in. In Windows, if you are having what you believe to be device driver related issues that may cause conflicts or false positive, it may be a wise decision to choose the most minimal testing environment (DOS).

Run all tests EXCEPT: Fix All, Long Generic, and anything Advanced.

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)

A system thread generated an exception that the error handler did not catch.


Quote:




IMAGE_NAME: memory_corruption ... Read more

http://www.techsupportforum.com/forums/f299/bsod-self-built-computer-crashing-704640.html
Relevancy 56.76%

In mid august after doing about a weeks worth of research on building computers i took a trip to my local Micro Center to purchase the parts to build a computer to better suit my Computer Aided Design Needs I employed my fathers help with getting everything set up since he has built a few himself We had just gotten the computer put together by the time I had to go to work so i left him to set up Windows and the drivers while at work my dad finished with all the software set up i was working overnight pm- am any way the first time i turned the computer on windows told me that something was wrong and that it needed to roll back to a point in time when windows worked properly so i said OK and windows did its thing for a while i had no problems and the system was way better BSOD built computer Self throwing that i had expected I started noticing that on occasion i would wakeup my computer to find a pop up telling me that windows had recovered from an unexpected error i didnt Self built computer throwing BSOD think too much of this until recently i got to actaully the dreaded BSOD i decided to see if the problem persisted before i really started to worry a week later here i am dumbfounded as to why my computer is throwing stop errors troubleshooting i Self built computer throwing BSOD have tried Memtest running all night for passes no errors windows memory diag no errors chkdsk nada Moved RAM to new slots persisted i cant figure out what the problem is my best Self built computer throwing BSOD guess is i have some kind of corrupted system file the BSOD s can occur at random times i could be using the computer or the errors could occur in the middle of the night with no programs open at all My set up includes intel DH TC Chipset Board intel core i CPU x GB oCZ DDR RAM nVidia Quadro FX GPU oCZ W power Supply WD GB HDD will follow up later with dmp files have to get to work Thanks nbsp

A:Self built computer throwing BSOD

Please post the entire error code.
 

http://www.techspot.com/community/topics/self-built-computer-throwing-bsod.154589/
Relevancy 56.76%

Built my computer around February/March and ever since had 5 BSOD's... Unsure why, last one was yesterday. Upon viewing BSOD Viewer it appears the last two to be the same address "ntoskrnl.exe+748c0". Really want to get this BSOD problem over with, built a new computer in hope of getting rid of BSOD so I can play games freely... Any help appreciated.. Thanks!
 
Computer Specs:
 
Computer type PC/Desktop OS Windows 7 Home Premium 64 Bit CPU Intel® Core™ CPU @3.60 GHz Motherboard GIGABYTE H81-M HD3 Memory Patriot- S 4x2 GB Graphics Card NVIDIA GAINWARD GTX 750 
Hard Drives WD BLUE 500 GB Antivirus Microsoft Security Essentials Browser Google Chrome

A:Relatively new built computer BSOD's randomly

Hi LingKingg ^_^,
 
Unfortunately, the version of Windows which you are using is counterfeit.  Kindly install a genuine version of Windows and feel free to reply back so that we could help you. Pirated versions of Windows can cause unknown behavior due to the hacks done to it. Furthermore, according to the forum rules, the use of pirated software is not allowed.
 
 
Regards,
Pranav

http://www.bleepingcomputer.com/forums/t/579822/relatively-new-built-computer-bsods-randomly/
Relevancy 56.76%

? OS - Windows 7 x64
? clean installed on 120GB Corsair SSD (CSSD-F120GB3A-BK)
? full retail version
? <6 Months old
? <6 Months old - have you re-installed the OS? No

? Intel i7-3770K Ivy Bridge (BX80637I73770K)
? MSI N670GTX-PM2D2GD5
? ASUS P8Z77-V LK LGA 1155
? Antec HCG-750 750W ATX12V

This was a custom build I completed early August.

A:BSOD custom built computer

There are not any .dmp files in the upload to look at.
Check in the C:\windows\minidump folder to see if there are any, if there are zip up and upload, if not check the PC is set to collect mini dumps.

Check the PC is set to collect mini dumps> How to Check Computer is set to collect dumps

http://www.techsupportforum.com/forums/f299/bsod-custom-built-computer-671037.html
Relevancy 56.76%

I get BSOD on my computer as soon as Windows boot up If I unplug the power supply for about seconds and replace it the computer will boot up and run for about minutes before going back to BSOD I have noticed that the computer will also have lines in the screen etc right before it goes to BSOD The computer temps are running around c - c at its highest The computer specs are listed below ID-INFO BLKPEARL MODEL C SERIES SW- - JUST CAUSE GAME Computer BSOD Built Custom on SW- - BATMAN ARKHAM CITY GAME COUPON KB- - BLACK MULTIMEDIA INTERNET USB KEYBOARD MN- - SCEPTRE X W quot BSOD on Custom Built Computer X BSOD on Custom Built Computer BLACK LCD MO- - BLACK USB MOUSE CU- - INTEL i - GHZ M RETAIL HD- - TB SATA III RPM quot HARD DRIVE RM- - KINGSTON HYPER X DDR MHz GB MEMORY FA- - COOLERMASTER V GT CPU COOLER FAN CS- - BLACK AZZA SOLANO FULL TOWER NO POWER - BSOD on Custom Built Computer - CD- - BLACK LG UH LS K X BLU-RAY PLAYER amp DVDRW COMBO CD- - BLACK LITE-ON X DVDRW MR- - -IN-ONE INTERNAL CARD READER MB- - GIGABYTE GI SNIPER INTEL X SATA GB S USB LGA MB PS- - RAIDMAX RX- AE WATT PLUS GOLD POWER SUPPLY FC- - NZXT SENTRY LX ALUMINUM DUAL BAY DIGITAL FAN CONTROL VC- - NVIDIA GTX GB GDDR PCI-E DIRCTX SW- - WINDOWS HOME PREMIUM LICENSE SW- - WINDOWS HOME PREMIUM COA SW- - WINDOWS HOME PREMIUM SP -BIT BOX SYSTEM BOX AND FOAM ULTRA-PACKAGING ULTRA ENHANCED PACKAGING SOLUTION CABLE-PROWIRE PROFESSIONAL CABLE WIRING IMAGE-MESSAGE CUSTOM MESSAGE MISC COURIER NEW MISC ONBOARD SOUND

A:BSOD on Custom Built Computer

Please upload a report

http://www.techsupportforum.com/foru...ta-452654.html

http://www.techsupportforum.com/forums/f299/bsod-on-custom-built-computer-631457.html
Relevancy 56.76%

Hello,
This is my first post here, so I apologize in advance for making myself look like a fool.
I recently built my own computer, and I keep receiving the BSOD, roughly an hour and a half after boot.

Here are my last 5 crashes(is this in the correct format to read?)
Some other information I found while digging(may be useless)
and some specs

I suspect the problem is with the Video Card, but alas, I cant seem to figure it out.
Let me know if more information is needed
Thanks
 

A:Built a new computer, BSOD problem

You have an SSD drive. What is the motherboards make and model number?
 

http://www.techspot.com/community/topics/built-a-new-computer-bsod-problem.185154/
Relevancy 56.76%

So I just built my new computer a couple weeks ago and I'm still trying to figure out how to fix the bsod amp All my drivers are up to date and my bios as well I've been looking all over the web to get a solution but nothing seems to be working out If there's anyone out there that can help me out it would be much appreciated Here are the specs of my computer and the bccodes AMD FX- Zambezi GHz Processor GIGABYTE GA- A-UD Motherboard CORSAIR Vengeance GB GeForce GTX Ti GB Seagate Barracuda TB CORSAIR TX W Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP BCP BCP FFFFF F BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Tien AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:Newly built computer. BSOD 101 &124

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8008A3E038
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\121111-21762-01.dmp
C:\Users\Tien\AppData\Local\Temp\WER-31637-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

http://www.techsupportforum.com/forums/f299/newly-built-computer-bsod-101-and-124-a-617670.html
Relevancy 56.76%

My husband bought a custom-built PC from CyberPowerPC about a month ago. Ever since he got the PC we have had a problem with the screen glitching...it almost looks like someone hit the screen. Then, it will go to BSOD. I have posted an image of the error screen we are getting. Any help would be greatly appreciated. Also, we have uninstalled and reinstalled Windows 7, the graphics drivers, and also have been very selective about the Windows Updates because that was causing an issue before.
 

A:BSOD on Custom Built Computer

Welcome to the forum.
That is probably a video card error. It should still be under warranty contact Cyber Power.
 

https://forums.techguy.org/threads/bsod-on-custom-built-computer.1044817/
Relevancy 56.76%

Hello, I'm getting some BSOD's on a computer I just built this week. They appear random in that I don't think there is any particular action which sets them off that I know of. Here's the specs for my system:

? OS - Windows 7x64
? Computer was built about 4 or 5 days ago
? I did a reinstall of the operating system because it was initially installed to an SSD but I wanted to install it to my HDD instead do make use of Intel's caching feature
? CPU - i7-3770k 3.5 GHZ Ivy Bridge
? Video Card - Zotac Nvidia GTX 680
? Motherboard - Asus P8Z77-V LE
? Power Supply - Corsair 850W

The Windows7_Vista_jcgriff2.zip file is attached.

Thank you for your time.

Relevancy 56.76%

I built this computer on June rd had zero issues I OC d it built on BSOD First newly computer. to GHz on the th have been playing Crysis and NFS Undercover with no issues I ve run both at the same time while running prime and having Core Temp up averaging c Code G SKILL Ripjaws Series GB x GB -Pin DDR SDRAM DDR PC Desktop Memory First BSOD on newly built computer. Model F - CL D- GBRL -------------------------------------------------------------------------------------------------------- EVGA SuperClocked G-P - -AR GeForce GTX Ti Fermi GB -bit GDDR PCI Express x HDCP Ready SLI Support Video Card -------------------------------------------------------------------------------------------------------- Crucial RealSSD C CTFDDAC MAG- G quot GB SATA III MLC Internal Solid State Drive SSD -------------------------------------------------------------------------------------------------------- Intel Core i - K Sandy Bridge GHz GHz Turbo Boost LGA W Quad-Core Desktop Processor BX I K -------------------------------------------------------------------------------------------------------- ASUS P P PRO REV LGA Intel P SATA Gb s USB ATX Intel Motherboard -------------------------------------------------------------------------------------------------------- COOLER MASTER Hyper Plus RR-B - P-G quot Heatpipe Direct Contact quot Long Life Sleeve mm CPU Cooler Compatible Intel Core i amp Intel Core i ----------------------------------------------------------------------------------------------------------- COOLER MASTER HAF Advanced RC- -KKN -GP Black Steel ATX Full Tower Compucase Case with USB and Black Interior -------------------------------------------------------------------------------------------------------- Ultra X -Watt Modular Power Supply - mm Fan ATX -------------------------------------------------------------------------------------------------------- Microsoft Windows Ultimate x Listed above is all of my components The crash happened while I was transferring files from my slave drive to my external drive My cousin was using the computer watching a video on YouTube The dump file is attached to this thread I d analyze it myself but I haven t the slightest clue how The BSOD error said Stop x Help is appreciated thanks in advance nbsp

Relevancy 56.76%

Hey everybody,

I've been putting together a new computer for the past 2 weeks, and I've been getting the BSOD and I don't know why. It might be because of the cpu cooling or memory or the psu. I've changed the psu from 600w to 800w but I'm still getting the bs. I'm currently using the stock heatsink, maybe I need to get a better one?

Thanks!

System specs:
OS: Windows 7 Ultimate x64
CPU: Intel Core i7-3770K Ivy Bridge
MOBO: ASUS P8Z77-V PRO
RAM: G.SKILL Ripjaws X Series 16 GB (4 x 4GB)
GRAPHICS: EVGA 02G-P4-2678-KR GeForce GTX 670 FTW
SSD: Corsair Force Series 3 CSSD-F120GB3A-BK 120GB SATA III
PSU: CORSAIR Gaming Series GS800 800W

A:Newly built computer with BSOD, please help!

Problematic Software:
Code:
Start Menu\Programs\ASUS Public:Start Menu\Programs\ASUS Public
Start Menu\Programs\ASUS\AI Suite II Public:Start Menu\Programs\ASUS\AI Suite II Public
Recommend removing your ASUS utilities through Start Menu -> Control Panel -> Uninstall a program. They can provide software interfaces with the hardware for overclocking, and even when the overclock is not enabled, that interface can cause instability.

Code:
Event[2179]:
Log Name: System
Source: Ntfs
Date: 2012-06-20T04:13:09.421
Event ID: 55
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: JordanLu-PC
Description:
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:.

Your crashes primarily indicate hard disk problems. This could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption, viruses, or memory problems.If you are overclocking any hardware, please stop.

Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
For any drives that do not give the message:
Windows has checked the file system and found no problems
run disk check again as above. In other words, if it says:
Windows has made corrections to the file system
after running the disk check, run the disk check again.

Run all Basic tests with SeaTools: S.M.A.R.T. Check, Short Drive Self Test, Drive Information, Short Generic, and Long Generic. Run the tests for all HDDs.SeaTools for Windows

SeaTools for DOS
If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains ... Read more

http://www.sevenforums.com/bsod-help-support/236536-newly-built-computer-bsod-please-help.html
Relevancy 56.76%

My computer has been getting the BSOD with normal use. It's a brand new computer that I assembled myself. The only parts that aren't new are the three internal hard drives, which were salvaged from an older machine. Appreciate any help, thanks in advance!

A:BSOD on newly built computer

Welcome aboard.

Your crash dump says: STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTIONwithUsual causes: System service, Device driver, graphics driver, memory.

An investigation into the dump reveals

Code:
fffff880`026fa6c8 fffff880`0f0b6fdcUnable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
igdkmd64+0x4dfdc
igdkmd64.sys is Intel Graphics driver. You try to update it from Download Center.

Also Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/257977-bsod-newly-built-computer.html
Relevancy 56.76%

Hello,

I get a BSOD at mostly random times. I've attached the files as per the posting instructions. Any help is appreciated.

Edit #1:
I ran driver verification - no BSOD occurred. Attached is the result of verifier /query.

A:BSOD - Custom Built Computer

Additional Information.

http://www.techsupportforum.com/forums/f299/bsod-custom-built-computer-688490.html
Relevancy 56.76%

I built this computer yesterday and through the installing and uninstalling drivers I think this might be the cause but then again I am not very good with PC's. I hope I follows the steps correctly, still pretty noob at this whole computer thing.

Vista
32-bit
Original OS on hard drive
Hardware is mix n match parts from my buddy
Age = All this hardware seems to be old but not junk
OS has been on the hard drive and I believe it has had past BSOD problems

Intel Pentium 4 CPU 3.00 GHz
NVIDIA GeForce 9800 GT
BIOSTAR P43-A7
Orion 585 Watts

A:BSOD Built computer yesterday

Blue screens when I start games, either at launch or in game

http://www.techsupportforum.com/forums/f299/bsod-built-computer-yesterday-705001.html
Relevancy 56.76%

Hello A small BSoD's Various Built Computer on Custom bit of history first The computer in question is a custom build that I had been using for around years with no problems at all I then gave it to my sister after a complete format and she has Various BSoD's on Custom Built Computer started to experience many BSoD's with it Please note that only the internal hardware is the same she may be using external hardware USB devices that are different to what I was using which I believe may be the problem here I did try running Driver Verifier and the computer would not boot up It would BSoD into an IRQL NOT LESS OR EQUAL Sometimes I noticed the computer would not even get past POST It would finish all the memory tests then just restart I have attached the entire folder of the SF Diagnostic Tool If anyone could help shed some light on why I am receiving these BSoD's and how to fix it I would really appreciate it

A:Various BSoD's on Custom Built Computer

Hi aommaster.

Apparently the BSODs are seeming to be some sort of driver fault, but the failing driver/s are not showing up in the crash dumps.

Code:
INVALID_KERNEL_HANDLE (93)
This message occurs if kernel code attempts to close or reference a handle
that is not a valid handle. Only invalid or protected handles passed to NtClose
will cause this bugcheck, unless bad handle detection is enabled.

Code:
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
Enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/324143-various-bsods-custom-built-computer.html
Relevancy 56.76%

I'm running Windows 8.1 64 bit, I've had "irql_not_less_or_equal" BSOD and "paged fault in nonpaged area" BSOD.

Specs-
Motherboard- ASUS MAXIMUS VI HERO LGA 1150 Intel
CPU- Intel Core i5-4570 Haswell Quad-Core 3.2GHz
Ram- G.SKILL Ripjaws X Series 4GB (2 x 2GB) 240-Pin DDR3
Graphics- PNY VCGGTX650T1XPB GeForce GTX 650 Ti

Please help! =)
I'v heard good things about this forum.

A:Recently built my computer, have a few BSOD

also! I have "bad pool header" BSOD ... it's blue screening about every 30 minutes i would appreciate any help very very much

http://www.sevenforums.com/bsod-help-support/354440-recently-built-my-computer-have-few-bsod.html
Relevancy 56.33%

I just recently built my new computer, and have noticed that i keep getting IRQL_NOT_LESS_OR_EQUAL bsod. This tends to come up after playing a game for an hour or so, but the times are usually random. It has even happened while running other programs....which is slightly annoying. I thought it might be the ram cards, so i took one off, which delayed the issues it seemed...but they are back. I can still run windows and everything, so not sure how severe it is.
 

Relevancy 56.33%

Hey I've recently built my own computer and lately ive been getting completely random BSOD errors and sometimes the whole system just hangs and I can't move the mouse or anything and need to turn the power off

CPU -AMD FX-6100 CPU
Video Card - Leadtek Geforce GTS450, 2GB
Power Supply 500W

This is really irritating to me because I just want to enjoy my new computer

If any of you guys could help me it would be HIGHLY appericated :)

I've read the instructions and attached the file.

A:BSOD Problems Newly Built Computer

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT Troubleshooting

Info on the STOP 0x101 error.

Please refer to this link...

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg - Windows 7 Forums

http://www.techsupportforum.com/forums/f299/bsod-problems-newly-built-computer-653655.html
Relevancy 56.33%

Hi team I built my own computer a few weeks ago after a few days I started getting the BSOD randomly I have never had the time to sit and troubleshoot the issue until now I have tested the RAM but this did not help the issue I have performed a clean install of Windows My machine has up to date drivers My machine has up to date Windows Updates I have ran SFC SCANNOW C Windows system gt SFC SCANNOW Beginning system scan This process will take some time Beginning verification phase of system scan Verification complete Windows Resource Protection found corrupt files and successfully repaired them Details are included in the CBS Log windir Logs CBS CBS log For example C Windows Logs CBS CBS log My computer does not look like it is over heating Dump File - - dmp Crash Time Bug Check String MEMORY MANAGEMENT Bug Check Code x a Parameter Parameter Parameter Parameter Caused By Driver nvstor sys Caused By Random BSOD Built - Custom Computer Address nvstor sys File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe bc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time

A:Custom Built Computer - Random BSOD

How many passes did you take memtest for?


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\DPC4LF-10_04_2014__91543_41\040914-57500-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`02819000 PsLoadedModuleList = 0xfffff800`02a5c6d0
Debug session time: Wed Apr 9 21:18:04.183 2014 (UTC + 6:00)
System Uptime: 0 days 3:18:31.201
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
.............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41287, 38, 0, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+454f5 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041287, An illegal page fault occurred while holding working set synchronization.
Parameter 2 contains the referenced virtual address.
Arg2: 0000000000000038
Arg3: 0000000000000000
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_41287

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: CcmExec.exe

CURRENT_IRQL: 0

TRAP_FRAME: fffff88003139900 -- (.trap 0xfffff88003139900)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa8004c2e0c8 rbx=0000000000000000 rcx=0000000000000000
rdx=fffff8a004003120 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002995a87 rsp=fffff88003139a90 rbp=0000000000000000
r8=fffffa8004a1001a r9=fffffa800644b048 r10=fffffa800558e010
r11=fffffa80055793b0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
nt!MiEmptyPageAccessLog+0xe7:
fffff800`02995a87 8b4138 mov eax,dword ptr [rcx+38h] ds:00000000`00000038=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002827d2e to fffff8000288ebc0

STACK_TEXT:
fffff880`03139798 fffff800`02827d2e : 00000000`0000001a 00000000`00041287 00000000`00000038 00000000`00000000 : nt!KeBugCheckEx
fffff880`031397a0 fffff800`0288ccee : 00000000`00000000 00000000`00000038 fffff8a0`050ee300 00000000`000c241a : nt! ?? ::FNODOBFM::`string'+0x454f5
fffff880`03139900 fffff800`02995a87 : 00000000`00000000 fffffa80`0558e050 00000000`00000002 fffff880`009e97f0 : nt!KiPageFault+0x16e
fffff880`03139a90 fffff800`0290ff73 : fffffa80`04a13060 00000003`00000000 00000000`00000000 fffffa80`04c2e0c8 : nt!MiEmptyPageAccessLog+0xe7
fffff880`03139b00 fffff800`02878b06 : 00000000`00002e89 00000000`00000000 fffffa80`00... Read more

http://www.sevenforums.com/bsod-help-support/328063-custom-built-computer-random-bsod.html
Relevancy 56.33%

Hi all Built a new computer yesterday Been having a lot of BSOD problems Dump files are attached What I've tried so far - Full re-install of Windows twice - Replaced SATA cable on hard drive seemed to work gave me hours without BSOD before they started coming back - Ran BSOD computer built 000000f4 Newly Malware Bytes no issues - Disk check no errors Other info that might be useful - Have legit copy of Windows - Before replacing SATA cable BSODs happened within - minutes of starting computer doing things such as downloading drivers from internet downloading system updates etc - After replacing SATA cable BSODs seemed more sporadic - After running the Disk Check minutes ago BSOD would happen as soon as computer started up to the point where I couldn't do anything Newly built computer BSOD 000000f4 at all Restarted in Safe Mode where I am now and have been BSOD free for the last minutes Edit got BSOD when trying to shut down from safe mode right after I posted this Let me know if you have any questions or if there's anything I can clarify Thank you in advance for your time and any suggestions you might have

A:Newly built computer BSOD 000000f4

Hi columbusjones.

First of all, make it sure that the SSD is running with the latest firmware. How to Upgrade Crucial SSD Firmware | StorageReview.com - Storage Reviews
The SSD is a Crucial MX100 CT256MX100SSD1 2.5" 256GB.

Let us know the situation.

http://www.sevenforums.com/bsod-help-support/349338-newly-built-computer-bsod-000000f4.html
Relevancy 56.33%

? OS - Vista/ Windows 7 ?
Windows 7

? x86 (32-bit) or x64 ?
64x

? What was original installed OS on system?
Windows 7

? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)?
OEM

? Age of system (hardware)
Recently bought off of Tigerdirect

? Age of OS installation - have you re-installed the OS?
Factory reset, which had Windows 7 pre installed about a month ago.

? CPU
i7 4770k

? Video Card
Intel HD graphics 4600

? MotherBoard
Intel DB85FL_

? Power Supply - brand & wattage
Forgot the brand, 750w

? System Manufacturer
INTEL

? Exact model number (if laptop, check label on bottom)

Laptop or Desktop? Custom Desktop

A:BSOD Error Custom Built Computer

Hi Gaining_Levels,

Welcome to TSF! :)

Can you confirm that your computer has all of the current Windows Updates installed? If you can check that whilst I analyse your logs that'd be great.

Regards

http://www.techsupportforum.com/forums/f299/bsod-error-custom-built-computer-874474.html
Relevancy 56.33%

So I recently put together a computer for a friend of mine. We booted it up, and everything seemed to be fine. Unfortunately, he has been having intermittent BSOD crashes, often when installing new software (though not always). We've tried reinstalling Windows 7 (64 bit) several times, and I've had him run various RAM and hard drive diagnostics, which have (so far) not indicated any issues. My suspicions are beginning to point towards the motherboard or power supply, but honestly I'm pretty inexperienced when it comes to analyzing dumps. I've attached the relevant dump files.

I don't have a full list of hardware directly at my disposal, but if necessary I can have him run a System Health Report tomorrow and get numbers on the PSU wattage, etc.

For the record, it's an OEM version of Windows 7 64-bit. All hardware is new.

A:BSOD On Newly Built Windows 7 Computer

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

In most cases, BSOD's that continue after reinstalling WIndows are due to hardware problems. BUT, this all depends on what elese is installed - both through Windows Update and what the user installs.

FWIW - the most common problem that I have when assembling systems is that I haven't firmly seated the connections. So I suggest that you remove and reconnect all devices and connections as your first step (take proper anti-static precasutions).

The dump files will give us some idea of what's going on, but the additional files that I've requested will help us even more.

9 memory dumps dating from 16 Sep to 01 Nov 2011
5 different BSOD error codes
6 different causes blamed
This is most likely a hardware problem, although compatibility issues, low-level driver problems, or even malware can also cause these problems.

I would suggest trying these free diagnositcs/stress tests:

Quote:





Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Then, if the above tests pass, I'd try these free stress tests:

Quote:




FurMark download site: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
NOTE: Set the alarm to go off at 90?C. Then watch the system from that point on. If the system doesn't display a temperature, watch it constantly and turn it off at the first sign of video problems. DO NOT leave it it unmonitored, it can DAMAGE your video card!!!
If the temperature gets above 100?C, quit the test - the video card is overheating.
- Click "Quit" to exit





Quote:




Prime95 download site: Free Software - GIMPS
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
Monitor the CPU temperature and DON'T let it exceed 85?C. If it does, then you probably have a CPU cooling problem.
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.
More details on the use of this test: Torture test your CPU with Prime95





Quote:




More Video Stress Tests:
1. Thanks to VirGnarus for finding t... Read more

http://www.techsupportforum.com/forums/f299/bsod-on-newly-built-windows-7-computer-610801.html
Relevancy 56.33%

Background I had my custom computer build for me the parts are Processor - Intels i ghz Motherboard - MSI Z A-G Graphics Card - MSI Radeon Harddrive - Seagate Barracuda RPM TB mb cache RAM - x GB Ballistics Memory Sticks DVD CD XX - optical drive operating system - Windows Home Premium bit I do use Norton Antivirus Idk if that matters but yes I did install it in the first time and now the second time First time Installing Windows BSOD Newly built BCCode: in computer 50 everything went well I thought till I starting updating everything Starting with the Mobo disk then the Gpu disk then windows updates having updating everything including optional ones So then I got massive BSODS and lots of problems wasn't functioning like mins without one So then I rebooted did a clean reboot of the entire system and wiped the HDD before starting it then it all worked better I didn't use the optional updates and only did the updates from the BSOD in Newly built computer BCCode: 50 disks I got without the quot afterburner quot and quot CCC quot from ATI Now I am getting this screen I have gotton it randomly from time to time and right now it is working perfectly I haven't made many changes nothing crazy Everything says it's up to date when I go into the device manager Just curious as to why this happens I am not holding my breath because I know this could come up at any time When it doesn't come up it plays flawlessly like I did last night for hours no problems then rebooted in the morning to a BSOD then mins later no problems for an hour or two and shut off Then today I was using my comp then BSOD as updating the mobo for some devices then I reboot no problems and I played games for hours and here I am So if you guys could help me please Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFD A ED BCP BCP FFFFF F EF BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Spencer AppData Local Temp WER- - sysdata xml

A:BSOD in Newly built computer BCCode: 50

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

http://www.sevenforums.com/bsod-help-support/268153-bsod-newly-built-computer-bccode-50-a.html
Relevancy 56.33%

I built a computer recently not my first time with the following components An ASUS motherboard An AMD Athlon II X GB Sticks of DDR ADATA Ram An MSI Radeon A GB Hitachi hard drive A W Thermaltake power supply TR Windows x - Full Retail Downloaded through - Confusing on Built Computer BSOD Problem college email BSOD - Confusing Problem on Built Computer This computer worked fine BSOD - Confusing Problem on Built Computer after I built it I installed Windows with no problems and it ran quite smoothly However when I came the next day to turn it on the computer rebooted immediately upon running windows After several times of this happening it then proceeded to run a disk check The computer occasionally loaded windows fine but usually would display something similar to quot white noise quot on the screen - except it was colored The following is the windows description of the blue screen Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP FFFFF BCP BCP B OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Morgan AppData Local Temp WER- - sysdata xmlThe Performance Report and the Blue Screen Report detailed here will follow in the next post I would greatly appreciate any help that can be provided - hopefully before the deadline to return parts to newegg

A:BSOD - Confusing Problem on Built Computer

Here is the blue screen report. Please let me know if you have any questions or need more information.

Thanks!

http://www.techsupportforum.com/forums/f299/bsod-confusing-problem-on-built-computer-508083.html
Relevancy 56.33%

I revived a BSOD error 0x0000003B while the computer was at idle. The computer was at idle. I think I uploaded the dump file correctly. I am new here.

Thanks for your time in advance.
jtn0123

A:BSOD 0x0000003B on newly built Computer.

Welcome

Your BSoDs were caused by "Symantec Extended File Attributes"
Norton is a known cause to BSoDs, suggest you to uninstall it and all its components right away.
Keep MSE instead. It's free, light weight and does not cause such problems.
→ Norton Removal Tool
→ Microsoft Security Essentials - Free Antivirus for Windows

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff800021c204b, fffff88002ddc5f8, fffff88002ddbe50}

Probably caused by : SYMEFA64.SYS ( SYMEFA64+12441 )

Followup: MachineOwner

Code:
STOP 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Usual causes: Insufficient disk space, Device driver, Video card, BIOS,
Breakpoint with no debugger attached, Hardware incompatibility,
Faulty system service, Memory, 3rd party remote control,
-------------------------------
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
Usual causes: Device driver, hardware, System service, compatibility,
Remote control programs, memory, BIOS
Go through these if you have time:
→ Malwarebytes - The Free version
→ Good and Free system security combination.

Run the System File Checker that scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
→ SFC /SCANNOW Command - System File Checker

Free up your start-up, keep nothing except your antivirus:
→ Startup Programs - Change

Keep us posted, good luck

http://www.sevenforums.com/bsod-help-support/258271-bsod-0x0000003b-newly-built-computer.html
Relevancy 56.33%

Hi I have nowhere else to turn as I am continuously getting blue screens I will attach the minidump files from my folder but first i'll give you my computer specs Asus M N TD mobo Corsair GB x GB M N TW X G C A AMD Phenom II x Black Edition ECS Geforce GTX WD Caviar Black TB HDD Memorex CD DVD Drive Corsair CMPSU- TX -Watt TX Series Power Supply Ok now every time I get a blue screen i research the stop code Almost every time it has come up with quot memory quot issues So i checked my ram and of course my Nonstop computer on home BSOD built computer detected problems I then sent the ram back but to no avail New ram still having blue screens Ok so maybe it is my hard Nonstop BSOD on home built computer drive Bought a brand new hard drive and stuck it in Problem free or so I thought About hours later blue screens again My next attempt at solving this was my mobo I figured maybe the DIMM slots were defective so I sent that back and received a new one but minutes after hooking it up another blue screen Still quot memory quot related I can't figure out what could possibly be wrong Just got another blue screen while typing this so I will also include that one in the minidump files Please help I have no further knowledge as to what could be wrong Edit I forgot to mention I ran a ram check on my new ram with my old mobo and it still detected problems What are the chances that I got bad ram times in a row

A:Nonstop BSOD on home built computer

Hi -

Please run - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/nonstop-bsod-on-home-built-computer-523568.html
Relevancy 56.33%

Hello,

I am running Windows 8 64 bit Professional. Occasionally, I'll get seemingly random BSOD's when trying to game or watch a video on Youtube. The error that shows is a KERNEL_SECURITY_CHECK_FAILURE.

The computer also sometimes hangs on restart, then BSOD's with a DRIVER_POWER_STATE_FAILURE.

This is a custom built desktop. This is extremely annoying. Thanks in advance for the help.

I have attached my dump zip file.

A:Custom Built computer random BSOD's

No memory dumps in the uploaded reports. Please:





Upload Dump Files:
NOTE: If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service. Then post the link to it in your topic so that we can download it.

Also, search your entire hard drive for files ending in .dmp, .mdmp, and .hdmp. Zip up any that you find and upload them with your next post.

Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDumpMore info on dump file options here: Overview of memory dump file options for Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2




Only 57 Windows Updates installed. Most systems have 66 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

You have a D-Link Wireless N USB Adapter DWA-130:





I do not recommend using wireless USB network devices. Especially in Win7/Win8 systems.
These wireless USB devices have many issues with Win7(and I suspect with Win8) - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7/Win8 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is all controllers, not just the one that the SSD is attached to.



Problems with these devices in Device Manager:





Microsoft Hosted Network Virtual Adapter {5D624F94-8850-40C3-A3FA-A4FD2080BAF3}\VWIFIMP_SAP\7&2FE22C31&0&01 Reinstall the drivers for this device.

Not Available ACPI\INT33A0\0 The drivers for this device are not installed.



For the first device, right click on it and select "Uninstall". Reboot the system to see if it's detected properly. If not, post back

The second device is the Intel(R) Smart Connect Technology Device - please download and install the latest, Win8 compatible drivers for it. If not available at the PC manufacturer's site, you can check at http://downloadcenter.intel.com

Although there are no memory dumps uploaded, I did manage to find 2 BSOD's in the WER section of MSINFO32.
They are both STOP 0x139 errors ( KERNEL_SECURITY_CHECK_FAILURE ) and both blame MRVW24C.sys (a driver component of your Wireless USB Network Adapter - Marvell TOPDOG 802.11n WLAN Driver for Vista x64 (USB8x)). Since this driver dates from 2007, it's most likely to be your problem.

Please remove the software for this device, then physically remove the device from the system in order to test. Either use a very... Read more

http://www.eightforums.com/bsod-crashes-debugging/24501-custom-built-computer-random-bsods.html
Relevancy 56.33%

I recently built a new computer and have been getting between 1 and 4 BSODs a day. They seem to occur at no particular occasion when I am not doing a particular task. I have had blue screens when the computer is idle, when playing a game. Can someone please help me find out the issue here?

A:0x0000001e BSOD on custom built computer

7b35dbf48cc2b83b38bef5a3a816de54.png

Here is a gyazo of my specs in case you don't know them.

http://www.sevenforums.com/bsod-help-support/245042-0x0000001e-bsod-custom-built-computer.html
Relevancy 56.33%

Hello guys.
This is my first time on SF so hi.

I'm having a problem. I wanted to build my own computer with mid lvl hardware. Instead I found a 2nd hand computer from an enthusiast which had some hardware I wanted for an extremely affordable price. I knew something would be wrong with it so I checked it before I bought it and almost everything on it works good now.
The problem I keep running into are random BSOD's.
I've been googling around and run alot of tests and programs to try and fix it but the BSOD's keep coming up with different codes.

I'm running Windows 7. It's not the original OS but one from my other pc's.
The age of the hardware is unknown to me.
I've added the .rar file with the tests which the posting instructions told me to add.

Is there anyone out there that can put me out of my misery?

A:Random BSOD's on self built computer BCCode 50,1a and 24 so far

Oops I forgot the system specs:
Windows 7 Ultimate 64-bit
OCZ DDR3 PC3-12800 (4x2gb)
1Tb Western Digital WD10EARS
Asus m4a785TD-m EVO motherboard
Onboard graphics card (replacing it tomorrow with a Radeon 6850)
AMD Phenom 2 x4 965

http://www.sevenforums.com/bsod-help-support/195764-random-bsods-self-built-computer-bccode-50-1a-24-so-far.html
Relevancy 56.33%

So I recently put together a computer for a friend of mine. We booted it up, and everything seemed to be fine. Unfortunately, he has been having intermittent BSOD crashes, often when installing new software (though not always). We've tried reinstalling Windows 7 (64 bit) several times, and I've had him run various RAM and hard drive diagnostics, which have (so far) not indicated any issues. My suspicions are beginning to point towards the motherboard or power supply, but honestly I'm pretty inexperienced when it comes to analyzing dumps. I've attached the relevant dump files.

I don't have a full list of hardware directly at my disposal, but if necessary I can have him run a dxdiag tomorrow.
 

A:BSOD On Newly Built Windows 7 Computer

Unfortunately, the dumps are fairly uninformative. They implicate ntoskrnl.exe, which is usually driver-related, but is so general that even heat could be involved.

One dump was different and implicated tdrpm228.sys, the Acronis Try&Decide virtualization driver. This is an unlikely cause and this driver's failure may have been due to its having been caught up in some other problem, but just for now, you might uninstall Acronis until the problem is tracked down. May just disabling the T&D service would be enough.

Make sure that you have the latest drivers for graphics and your network card(s). If you used some driver DVD, go to the web site and use the drivers there.

(If you could capture a full memory dump, it would tell you more. But you would need to analyze it because it would be the size of your RAM. C:\Windows\memory.dmp)
 

https://forums.techguy.org/threads/bsod-on-newly-built-windows-7-computer.1025656/
Relevancy 56.33%

Sorry if this post is lacking info. I am posting for a friend via telephone.

He is building a PC and when he turns it on in regular mode, Windows XP begins to load, but he then gets the BSOD.

When starting in Safe Mode, he gets a bunch of spammed directory listing pop-ups trying to load drivers.

This is the BSOD error message:
Stop0x0000007e (0XC0000005,0XB8268756, 0XB84C342C, 0XB84C3128)

Also, when he boots he gets a CMOS battery low message. He replaced the battery and is still getting the error message.

ANY advice or input would be appreciated, as this is a huge mess.
Thank you!

A:BSOD Windows XP- Self-built computer won't boot

If building a new system, why is XP being installed?
Where did the XP CD come from?

Your friend s/b installing Windows 7.

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/bsod-windows-xp-self-built-computer-wont-boot-591639.html
Relevancy 55.47%

Greetings,

I am experiencing BSOD crashes intermittently when launching and playing Rift. It has also crashed once while surfing the net.

Computer specs:

ASUS M4A87TD EVO
AMD Phenom II X4 955
Sapphire Radeon HD 69870
Corsair GS700 (700watt PSU)
2x2GB GSkill Ripjaw DDR3 1600Mhz

I have a 80GB SATA HD and a 180GB IDE HD I use for storage. Both of these hard drives were used on my old setup, however when reinstalling windows, I reformatted the 80GB completely.

Retail Windows 7 x64 Ultimate (installed 2 days ago)
I have run MemTest86+ on both slots with both sticks through 7+ passes with no errors whatsoever.

I have used DriverSweep to clean up drivers, the sweep uninstalled my ATI drivers which i reinstalled from the website.

Attached is the dump analysis and performance analysis.

Your Help is greatly appreciated!! If any other information / tests is needed I am standing by!

Best Regards,

Brian

A:BSOD playing games, newly built computer

  
Quote: Originally Posted by Riegerb


Greetings,

I am experiencing BSOD crashes intermittently when launching and playing Rift. It has also crashed once while surfing the net.

Computer specs:

ASUS M4A87TD EVO
AMD Phenom II X4 955
Sapphire Radeon HD 69870
Corsair GS700 (700watt PSU)
2x2GB GSkill Ripjaw DDR3 1600Mhz

I have a 80GB SATA HD and a 180GB IDE HD I use for storage. Both of these hard drives were used on my old setup, however when reinstalling windows, I reformatted the 80GB completely.

Retail Windows 7 x64 Ultimate (installed 2 days ago)
I have run MemTest86+ on both slots with both sticks through 7+ passes with no errors whatsoever.

I have used DriverSweep to clean up drivers, the sweep uninstalled my ATI drivers which i reinstalled from the website.

Attached is the dump analysis and performance analysis.

Your Help is greatly appreciated!! If any other information / tests is needed I am standing by!

Best Regards,

Brian


Brian Hi and welcome
These were Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation. I would re-install with the newest available as yours is over a year old.

http://www.sevenforums.com/bsod-help-support/184383-bsod-playing-games-newly-built-computer.html
Relevancy 55.47%

was recently playing some league of legends and browsing youtube and my screen flashed went black for a few seconds and i got a blue screen of death ive read other posts there is no name or sys file to indicate what caused it just this in the technical information STOP X E xFFFFFFFFC xFFFFF EA X X B i have read the forums and it tells me to download that file to collect the dump data and to zip it up so you guys can see it but problem the BSOD happens around seconds after loading up the desktop ive tried a system restore still its happening restar on month computer BSOD custom built 0X0000001E old 5 computer logs me in lasts a few second mouse freezes screen flashes black and theres the blue screen of death dislaying the same thing over and over again anyideas on how to install this or will i have to do BSOD on 5 month old custom built computer 0X0000001E a full install of windows again i have been having graphics card issues every now and again before the dump for instance watcing a youtube video the youtube player would turn full green and it would say a graphics related so and so has stopped working Yesterday i got it to work and not show me the screen of death for around hours when i restdarted it bam the screen again when it did work for taht limited amount of time it said somethign about a catalyst center had stopped working my graphics drivers i thught were uptodate as im using a RADEON HD Graphics card please help

A:BSOD on 5 month old custom built computer 0X0000001E

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/bsod-help-support/188926-bsod-5-month-old-custom-built-computer-0x0000001e.html
Relevancy 55.47%

Just built this computer and had no problem and out of no where after a couple weeks i started getting bsod ive done "sfc /scannow" no discrepancy ive scanned multiple things including the harddrive, virus scan and entire computer with nothing coming up i included sf debug files as i do not know what to look for in them.

A:BSOD custom built computer not shure what to due, randomly happens.

Please help thank you

http://www.sevenforums.com/bsod-help-support/358612-bsod-custom-built-computer-not-shure-what-due-randomly-happens.html
Relevancy 55.47%

Hello Sevenforums members and thank you in advance for the assistance I have recently built a computer and I am experiencing frequent freeze-ups and BSOD events with it None of my previously built rigs have experienced this and the most recent computer used several of the components currently in use including the SSD graphics card case PS CPU cooler and Windows Computer stats are as follows Windows Home Premium bit retail version Seasonic SS- HT watt Asrock Xtreme motherboard AMD Phenom II Black processor Deneb at Ghz Gig RAM G SKILL Ripjaws Model F - CL D- GBRL EVGA GTX SE video card built ups BSOD and computer events custom in Freeze OCZ Vertex SSD Gb All of this has been assembled recently though many of the components listed above have been in service for some time Nothing is overclocked I have experienced more freeze ups than BSOD These have come at all different conditions including web-browsing watching video both WM Player and online Freeze ups and BSOD events in custom built computer Youtube downloading files while computer is unattended I return and find computer unresponsive and occasionally while gaming mostly MS Flight Sim X I have not determined a pattern Cooling is very good in the case and the Asrock board fan controllers maintain the CPU reported temp below C at idle and I have not seen the core temp above C in any situation other than a run of the program 'Core Damage' I followed the directions for how to assemble a help thread for this forum but I have not looked up any error codes yet Freeze ups and BSOD events in custom built computer have not ever needed Freeze ups and BSOD events in custom built computer to with Win so I will look into that in parallel Again thank you for any help Wes

A:Freeze ups and BSOD events in custom built computer

First things of note is CFOS speed. Known to cause both freezes and crashes. It needs to be removed.

Second and most likely you problems is y our Norton.

Of the 2 dmp files uploaded one was corrupt and one was inconclusive so we are going to have to wait for more of them.
I do notice Symantec which is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

http://www.microsoft.com/security_essentials/

http://www.sevenforums.com/bsod-help-support/205467-freeze-ups-bsod-events-custom-built-computer.html
Relevancy 55.47%

Hi there! I'm hoping to find out the origin of the issues I've been having with my new PC. I recently put it together; the configuration is in my profile. I have had a number of blue screens over the last few days, all with the IRQL_NOT_LESS_OR_EQUAL message.

I know that I have had World of Warcraft running when most of them have occurred, but I can't say with certainty that it was running for each and every occasion. I've uploaded my SF Diagnostic Folder. Hopefully, this is enough information to find a solution.

Thank you in advance!

A:BSOD: IRQL Not Less or Equal, newly built computer

Hi Pyrillia.

How old your Razor products are? Can you identify any time relation between the usage of Razor and the occurrence of the BSODs?

Update the Etron USB 3.0 driver ver:1.0.0.115 from ASRock > 970 Pro3 R2.0. If still it is the same, remove razor stuff, at least as a test.

Also update the network driver from Realtek. Get the Win7 and WinServer 2008 R2 Driver (first one of the list), follow Driver Install - Device Manager to install it.

Let us know the results.
________________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {80038000020, 2, 0, fffff80002e758d2}

*** WARNING: Unable to verify timestamp for rzudd.sys
*** ERROR: Module load completed but symbols could not be loaded for rzudd.sys
Probably caused by : kbdclass.sys ( kbdclass!KeyboardClassServiceCallback+47e )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000080038000020, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002e758d2, address which referenced memory

Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030bb100
GetUlongFromAddress: unable to read from fffff800030bb1c0
0000080038000020 Nonpaged pool

CURRENT_IRQL: 2

FAULTING_IP:
nt!KiInsertQueueApc+322
fffff800`02e758d2 4c396220 cmp qword ptr [rdx+20h],r12

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: System

TAG_NOT_DEFINED_c000000f: FFFFF88002F22FB0

TRAP_FRAME: fffff88002f1ac30 -- (.trap 0xfffff88002f1ac30)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa800987fba0
rdx=0000080038000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002e758d2 rsp=fffff88002f1adc0 rbp=fffff880009ec180
r8=0000000000000000 r9=fffffa800987fba0 r10=0000000000000000
r11=fffff88002f1af02 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po cy
nt!KiInsertQueueApc+0x322:
fffff800`02e758d2 4c396220 cmp qword ptr [rdx+20h],r12 ds:00000800`38000020=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002e83169 to fffff80002e83bc0

STACK_TEXT:
fffff880`02f1aae8 fffff800`02e83169 : 00000000`0000000a 00000800`38000020 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`02f1aaf0 fffff800`02e81de0 : 00000000`00000000 00000000`00000002 fffff880`02f1ac70 fffffa80`0987fb50 : nt!KiBugCheckDispatch+0x69
fffff880`02f1ac30 fffff800`02e758d2 : 0000057f`f71b6b08 00000000`0... Read more

http://www.sevenforums.com/bsod-help-support/316046-bsod-irql-not-less-equal-newly-built-computer.html
Relevancy 55.47%

I revived a BSOD error 0x0000003B while the computer was at idle. The computer was at idle. I think I uploaded the dump file correctly. I am new here.

Thanks for your time in advance.

A:BSOD 0x0000003B on newly built Computer in idle

Code:
BugCheck 3B, {c0000005, fffff80002cfd8aa, fffff88007b42340, 0}

Probably caused by : memory_corruption ( nt!MiGetPreviousNode+53 )

Followup: MachineOwner
---------
Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result. A camera snap of the memtest86+ window before closing the program will be nice.

http://www.sevenforums.com/bsod-help-support/374820-bsod-0x0000003b-newly-built-computer-idle.html
Relevancy 55.47%

I recently built a computer in which I had a very odd problem This problem is detailed in another thread but the gist of it is that my computer randomly experiences BSOD errors resulting in a sort of quot colored noise quot on the monitor requiring a manual restart After checking a variety Confusing BSOD Computer Problem - Built Continuarion of in of things and reading the plentifully supplied advice on the Forum I was BSOD - Continuarion of Confusing Problem in Built Computer unable to locate the problem and decided the most likely fix would be a new motherboard I purchased another motherboard and formatted the computer All other parts are the same and the problem still occurs To recap my computer contains A Biostar Motherboard to replace the previous ASUS board - it was cheap An AMD Athlon II X GB Sticks of DDR ADATA Ram An MSI Radeon A GB Hitachi hard drive A W Thermaltake power supply TR Windows x - Full Retail Downloaded through college email Any advice you can give me would be highly appreciated The blue screen report will follow in the next post The system was no connected to in internet until I did so to post this and has almost no programs installed - should make for a much cleaner report than those I submitted last time Thanks in advance

A:BSOD - Continuarion of Confusing Problem in Built Computer

Here are the blue screen dumps along with the perfmon report.

http://www.techsupportforum.com/forums/f299/bsod-continuarion-of-confusing-problem-in-built-computer-538941.html
Relevancy 55.47%

I have had multiple BSOD crashes and have got the most recent dump in the zip file attached. I've recently (yesterday) built my new computer and it keeps getting BSOD's. I have installed all the drivers that came with it and it crashes, updated them, still crashes. There doesn't seem to be many similarities between the BSOD errors, but i'm no computer expert so i wouldn't know. Please take a look and help in any way you can.
Thanks!

A:BSOD Windows 7 Professional x64 newly built computer

Hello yatest,

Install Service pack 1 and all other windows updates.
Learn how to install Windows 7 Service Pack 1 &#40;SP1&#41;
Service Pack Center - Microsoft Windows

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/269098-bsod-windows-7-professional-x64-newly-built-computer.html
Relevancy 55.47%

I believe the error was x x x x x the x s might be at the end of the numbers I can t BSOD memory 4GB newly built computer brand on w/ remember I have a strong feeling the memory is to blame because it has crashes twice during prime testings using torture test that heavily uses memory It has also crashed while simply browsing the internet and also while completely idle I am wondering if having GB of memory with windows xp pro -bit would have anything to do with this The BIOS properly reports MB GB of memory I have memory remap on the NB enabled but windows xp only reports GB The mushkin memory modules are NOT listed in my motherboard s memory manual as being verified to work with the motherboard but of course that doesn t mean that they shouldn t work The memory I BSOD on brand newly built computer w/ 4GB memory have is a pair of GB mushkin DDR modules Here are the specifications below Brand mushkin BSOD on brand newly built computer w/ 4GB memory Model Type -Pin DDR SDRAM Tech Spec Capacity GB x GB Speed DDR PC Cas Latency Timing - - - Voltage V Heat Spreader Yes Here is the specs on the rest of the computer Thermaltake W PSU Intel Q Quad Core CPU at stock speeds XIGMATEK rifle cpu cooler w mm fan Asus Rampage Formula Motherboard x GB Seagate Barricuda rpm mb cache in RAID ATI HD Video Card Memory as listed above at stocks settings I have done NO overclocking on anything whatsoever All drivers are installed and verified All motherboard updates have been applied except for BIOS updates of which there have been about new revisions from the one that came with the motherboard Some of the notes of these revisions say quot improved memory compatibility quot I am wondering how to proceed to troubleshoot this I plan on running memtet How long do I have to run this to be fairly certain memory modules are ok Should I run one GB stick at a time or both is ok I want to apply BIOS updates because there appears to be updates in memory compatibility Should I do this before testing the memory Should I try running on of the sticks and see if BSOD occurs Thank in advance - there can be nothing more annoying than a BSOD on a fresh build nbsp

A:BSOD on brand newly built computer w/ 4GB memory

The mobo manual says it does not support memory made using 128MB chips which is what you have... so that may be the problem. Updating the BIOS may help (it would be nice if Asus website described exactly what the BIOS revisions do).
 

https://forums.techguy.org/threads/bsod-on-brand-newly-built-computer-w-4gb-memory.740894/
Relevancy 55.47%

Hiya I am getting a BSOD and windows no start I can go to safe mode Pls help I am not very computer savy I started getting BSOD today driver irql not less or equal I tried rolling back to a date it worked but no go I tried every option on the F at start up screen I added and removed all new programs I allocated more memory in the system I restarted ofcourse but no worky My system was made by a buddy who is computer savy but now out of the country military It is yrs old Win bit I didnt get a disk so I dont know how if copy is registered gb ram twin intel core duo cpu E ghz The BSOD happen during a restart I had previously loaded some software peer guardian and a tried to driver signature overriders all software was removed and sucessful restarts accomplished before I got the BSOD I had previously gotten a memory low notice but I dont understand it because I have a good amount of memory and I dont do much pls BSOD built somewhat computer home help system; illiterate, on BSOD home built system; somewhat computer illiterate, pls help the puter Usually have Facebook vuse and e-mail running Any help you can provide would be greatly appreciated thanks Billy I tried to run the second report system resources but it would not run error copied below IMG res wdc dll error gif IMG Error An error occured while attempting to generate the report The system cannot find the path specified

A:BSOD home built system; somewhat computer illiterate, pls help

  
Quote: Originally Posted by bharford


Hiya,

I am getting a BSOD and windows no start. I can go to safe mode. Pls help I am not very computer savy.

I started getting BSOD today. I tried rolling back to a date it worked but no go. I tried every option on the F8 at start up screen. I added and removed all new programs. I allocated more memory in the system. I restarted ofcourse but no worky.

My system was made by a buddy who is computer savy but now out of the country (military). It is 2 yrs old, Win 7 64bit (I didnt get a disk so I dont know how/if copy is registered), 4 gb ram, twin intel core 2 duo cpu E8400 3.0 ghz.

The BSOD happen during a restart. I had previously loaded some software (peer guardian 2 and a tried to driver signature overriders) all software was removed and sucessful restarts accomplished before I got the BSOD. I had previously gotten a memory low notice but I dont understand it because I have a good amount of memory and I dont do much on the puter. Usually have Facebook, vuse and e-mail running???

Any help you can provide would be greatly appreciated.

thanks

Billy

I tried to run the second report (system resources but it would not run; error copied below).


[IMG]res://wdc.dll/error.gif[/IMG] Error:

An error occured while attempting to generate the report.

The system cannot find the path specified.


Love to help but no DMP files included in upload, try this method


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/146067-bsod-home-built-system-somewhat-computer-illiterate-pls-help.html
Relevancy 55.47%

Hello,
I'm hoping someone can help as this is so frustrating. I have a Dell 8700xps running windows 8 and I keep getting crashes. If I try gaming it happens for sure, anywhere from a couple minutes in to 10-15 min. I can never play longer than that before a crash happens. Otherwise the crashes just happen at random times. I've used BlueSceenView and it always points to ntoskrnl. I have run every test I can find on my hard rive and on my RAM with everything checking out. So Im thinking it should be a driver issue but don't know how to identify it or at least narrow it down. Any help would be appreciated.

Here are my 2 latest crash dumps

A:ntoskrnl bsod - please help new computer

Hi albert83,

Please follow the directions for posting located here..

Blue Screen of Death (BSOD) Posting Instructions

http://www.eightforums.com/bsod-crashes-debugging/38047-ntoskrnl-bsod-please-help-new-computer.html
Relevancy 55.47%

I just recently built a new computer BSOD-ing New ntoskrnl.exe with computer New computer BSOD-ing with ntoskrnl.exe and while setting it up with the usual software chrome evernote word etc it began crashing regularly especially with Chrome Chrome constantly runs out of memory he's dead jim error and the OS windows produces a memory management error with my minidump files finishing with a mention of ntoskrnl exe being the problem The most consistent way to crash the computer is by opening tabs in Chrome at once webcomics folder which will begin to load them freeze and crash While overloading Chrome is consistent in crashing the system has crashed occasionally while doing other things such as installing software and attempting to figure out the crashes Firefox does not seem to crash the system under the tabs but it may have crashed once or twice After reading several other posts about similar problems I've done the suggested tips -I've run memtest which produced no problems in the RAM passes -windows memory diagnostic which produced no problems -sfc scannow which produced no problems -run DPchip and DPnet to update all my drivers it updated a few from my manufacturer's drivers from the site asus Z -a MB -remove all ASUS bloatware and turn on XMP in my bios latest version My computer is a fresh build aside from general software so all my information is backed up and I'm not opposed to a reformat and re-install of windows though I'd prefer to avoid that timesink My diagnostic info is uploaded here for y'all

A:New computer BSOD-ing with ntoskrnl.exe

Update: I updated a few minor drivers that I had missed from 3DPchip but the chrome overload test of mine (31 tabs) still crashed the system.

It then occurred to me that my new desktop was still on the floor on top of carpet which was likely impeding the airflow into my PSU. After putting the box on my desk, my overload test loads all of the tabs fully with no issues (no dead jims). I'll add another post if problems persist but the stability seems to fixed itself out. Win!

TL;DR: I'm a moron, put your desktop on a flat non-carpeted surface.

http://www.eightforums.com/bsod-crashes-debugging/60702-new-computer-bsod-ing-ntoskrnl-exe.html
Relevancy 55.47%

Hello, I have a gnarly issue with a clean install of Windows 10 enterprise on a new computer.
A preview of the mini dump you have here Capture.JPG - Google Drive
I did the steps for a complete data collection about it here. Attachment 110542
Any kind of help will be gladly received. I really have no idea what to do next.
Thank you!

http://www.tenforums.com/bsod-crashes-debugging/70170-bsod-ntoskrnl-exe-while-normally-using-computer.html
Relevancy 55.04%

I've been solving involving Computer. BSOD using Custom Built New internet/network this for almost two months but still no good I have a new custom built pc below is my specs VCard R RAM HyperX Fury gb PSU Thermaltake Lite Power Watts MOBO Z Gaming Processor I I also reformat New Custom Built Computer. BSOD involving using internet/network my pc for so many times My problem is that when I do activity like using facebook or using torrent software I getting a BSOD but New Custom Built Computer. BSOD involving using internet/network very randomly Also I used FireFox because when I used Google Chrome and play video in youtube it will automatically get a BSOD Sometimes it freezes sometimes it get a BSOD I already disable the Killer Network Manager as some said that it causes BSOD but still no good I already did series of test like Memtest Intel Burn Test and Furmark but all of the test passed I started to think that it was a hardware problem but as far as I know all of my parts are Brand New Lastly - or more hours of playing hardcore games didn't get me a BSOD so I have no problem in playing games or either in temperature problem Please help me I'm losing hope on this It's very frustrating day after day '

A:New Custom Built Computer. BSOD involving using internet/network

Follow the Blue Screen of Death (BSOD) Posting Instructions
and then report back.

http://www.sevenforums.com/bsod-help-support/355603-new-custom-built-computer-bsod-involving-using-internet-network.html
Relevancy 55.04%

Hello everyone I have built this machine after my old one died burned after suspected psu BSOD idle, ntoskrnl.exe computer while failure Anyway BSOD while computer idle, ntoskrnl.exe I formatted the SSD and reinstalled windows x Unfortunately I keep getting BSODs in random situations - mostly when the PC is being idle but sometimes when I'm surfing the web I have not experienced any crashes during playing games At first I had HD taken from the old computer however I was experiencing video driver crashes and sometimes bsods during web surfing not gaming I tried reseating the card but that did not really help it kinda got worse so I removed it That seemed to help for a few days but the bsod are back BSOD while computer idle, ntoskrnl.exe now What I did I ran memtest for like hours no errors Chkdsk - no errors Enable driver verifier - gt caused a bsod blaming gdrv sys I uninstalled all gigabyte apps and renamed gdrv sys to gdrv old system booted up ok but after some idle time bsod again it said fltmgr sys was probably to blame Comodo seems to cause a bsod when verifier is enabled and I try to run SF Diagnostic Tool so i ran it from safe mode Success but I decided to reboot and disable C antivirus amp auto-sandbox that solved the cmdguard crash issue so I'm not sure if the last dumps are relevant I am clueless about the bsod cause please help

A:BSOD while computer idle, ntoskrnl.exe

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C4, {e3, fffff880088a838d, 1fe300, 0}

*** WARNING: Unable to verify timestamp for cmdguard.sys
*** ERROR: Module load completed but symbols could not be loaded for cmdguard.sys
Probably caused by : cmdguard.sys ( cmdguard+838d )

Followup: MachineOwner
---------
Uninstall Comodo Firewall - use Windows firewall instead and monitor for further BSOD's.

http://www.sevenforums.com/bsod-help-support/359398-bsod-while-computer-idle-ntoskrnl-exe.html
Relevancy 54.61%

Hi Guys,

I have a new pc here that has been built in the last 2 days. And when the machine has been idle it has blue screened twice with NTOSKRNL.exe errors (see attached) one with a 0x0000000a and another with a 0x00000109 error

Machine stats are

Asus P8z77 V pro
Intel i7 2700k
16gb ram
120gb ssd primary
2 x 1tb Raid 0
Windows 7 Sp1
Mcafee AV (used on indenticle spec machines)

A:Freshly built PC with 2 random NTOSKRNL.exe 0x0000000a & 0x00000109

Make sure you install the latest drivers from:ASUS - Motherboards- ASUS P8Z77-V PRO

Do not install any software apart from your drivers until you have it stable.

Also I would recommend Microsoft Security Essentials - Free Antivirus for Windows instead of mcafee.

Keep us posted

http://www.sevenforums.com/bsod-help-support/258752-freshly-built-pc-2-random-ntoskrnl-exe-0x0000000a-0x00000109.html
Relevancy 54.18%

So I built this rig about a month ago and I cannot get it to work for the life of me Whenever I install the display drivers it is like they do not even take effect the screen flickers and then it either BSODS or freezes I've elliminated the cpu or the motherboard as problems as I've already replaced BOTH the cpu and the motherboard so they cannot be faulty and there cannot be problems with them video drivers freezes are or installed. Newly Computer Built BSOD's when because I have the same problem with a new motherboard and a new cpu This is my build Newegg com - AMD A - K Unlocked Llano GHz Socket FM W Quad-Core Desktop APU CPU GPU with DirectX Graphic AMD Radeon HD D AD WNGXBOX Newegg com - GIGABYTE GA-A M-S V FM AMD A Hudson D SATA Gb s USB Micro ATX AMD Newly Built Computer BSOD's or freezes when video drivers are installed. Motherboard Newegg com - CORSAIR GB x GB -Pin DDR SDRAM DDR Desktop Memory Model CMV GX M A C Newegg com - APEVIA X-Gear ATXB KLW-BK Black Steel ATX Mid Tower Computer Case W Power Supply Newegg com - HGST HDS CLA F GB RPM MB Cache SATA Gb s quot Internal Hard Drive -Bare Drive I've installed the drivers that have come with the motherboard and everything I'm using vista bit basic I've even installed several different versions of catalyst even the latest beta catalyst drivers The computer ONLY bsods and freezes when the display drivers are installed I do not understand why it is doing this even though I've replaced the MOBO and APU Can someone please help me I don't want to spend more money on this than I have to I've already bought the new mobo and cpu

A:Newly Built Computer BSOD's or freezes when video drivers are installed.

You may also want to install your AMD drivers without the Catalyst Control Center/Vision Engine Control Center software. Download the version of ATI drivers that you want to install, and then do the following steps. Start the installation program to install your drivers and ATI software. When you get to the option to Express/Custom install, cancel the installation. Your drivers should now exist in C:\AMD\Support\xx-x_vista_win7_64_dd_ccc where the x's replace your version number of the driver software.
Uninstall all AMD software related to your graphics card by uninstalling AMD Catalyst Install Manager in Start Menu -> Control Panel -> Uninstall a program
If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers:Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK

Alternatively:Login as an adminstrative user
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Expand Display adapters
Do the following for each adapter (in case you have multiple display cards)Right click the adapter
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer.
Re-install your drivers from the C:\AMD\Support\xx-x_vista_win7_64_dd_ccc folder. See You cannot install a device driver by using its installation program in Windows Vista and scroll down to
Quote:




To locate the .inf file and manually install the driver




for steps to manually install the driver.

http://www.techsupportforum.com/forums/f299/newly-built-computer-bsods-or-freezes-when-video-drivers-are-installed-658802.html
Relevancy 54.18%

Hey guys i d appreciate anyone s opinion / video computer, BSOD frequent editing freezing Recently-built on this as I recently built a computer for video editing took on my first assignment and Recently-built video editing computer, frequent BSOD / freezing have recently begun experiencing huge BSOD s and application freezing in the last few days The project is due Sunday I m really sort of flying by night on this one learning as I go I saw that people posted their associated dmp files to go along with it but I can t even figure out how Recently-built video editing computer, frequent BSOD / freezing to change the permissions to let me attach it I feel like this problem really started getting worse after I left the computer to Recently-built video editing computer, frequent BSOD / freezing render footage I came back about an hour later to discover that it had restarted perhaps as if it had updated I dunno I m just trying to give all the information possible Please help a stranger with an unusual problem I d be forever indebted if you could help me solve this issue I can t even save in Premiere Pro without freezing the program Sometimes when I press the power button Windows doesn t even boot Something is seriously wrong Thanks for your time Lee BCCode BCP BCP FFFFF A A CF BCP FFFFF A A CF BCP E OS Version Service Pack Product AMD Phenom II ATI Radeon series Graphics Card Asus motherboard nbsp

A:Recently-built video editing computer, frequent BSOD / freezing

Can you please attach minidump(s) for analysis with your next post? You can find dumps in C:\windows\minidump. Kindly zip them together in a single file in case there are multiple dumps. Regards
 

http://www.techspot.com/community/topics/recently-built-video-editing-computer-frequent-bsod-freezing.154498/
Relevancy 54.18%

I have had an ongoing issue with my computer ever since I got it over a year ago I get BSOD 'randomly' when I turn on my computer It can happen each month or it may take a rest and not do it for three minutes. is BSOD for after around ntoskrnl.exe computer loaded 3 months It will crash hard and often and then be perfectly fine Every time you restart the computer it BSOD after computer is loaded for around 3 minutes. ntoskrnl.exe will BSOD until you can shut the computer down properly Then I just start BSOD after computer is loaded for around 3 minutes. ntoskrnl.exe the computer up after a time and it's totally fine It only blue screens right when windows loads or when I first load a browser Chrome and IE I've checked the following RealTemp - all temperatures are fine WD Diagnosis - no errors on my hard drive MemTest with Windows loaded not on boot - no errors to report No viruses found with Microsoft Security Essentials and using others I've done Check Disk and looked into the errors and I get nowhere Here is the latest dump file Symbol search path is src c symbols http msdl microsoft com download s wnload symbols Executable search path is Windows Kernel Version Service Pack MP procs Free x Product WinNt suite TerminalServer SingleUserTS Personal Built by amd fre win sp gdr - Machine Name Kernel base xfffff e PsLoadedModuleList xfffff a d Debug session time Mon Oct UTC - System Uptime days Loading Kernel Symbols Loading User Symbols Loading unloaded module list Bugcheck Analysis Use analyze -v to get detailed debugging information BugCheck B c fffff edbeb fffff c Probably caused by win k sys win k xxxRealSleepThread Followup MachineOwner --------- The following is from BlueScreenView It recorded the crashes I have edited it taking away the file names and useless info I'm hoping it will help SYSTEM SERVICE EXCEPTION x b c fffff edbeb fffff c ntoskrnl exe ntoskrnl exe bc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe bc PAGE FAULT IN NONPAGED AREA x fffff fffff e f wmiacpi sys wmiacpi sys bb x ntoskrnl exe bc DRIVER CORRUPTED EXPOOL x c fffff fffff ff f ntoskrnl exe ntoskrnl exe bc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe bc PAGE FAULT IN NONPAGED AREA x fffff ab fffff d f ntoskrnl exe ntoskrnl exe bc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe bc KMODE EXCEPTION NOT HANDLED x e nvlddmkm sys nvlddmkm sys e c x ntoskrnl exe b C NTFS FILE SYSTEM x fb fffff d a fffff d a fffff c Ntfs sys Ntfs sys c x ntoskrnl exe bc DRIVER VERIFIER DETECTED VIOLATION x c fffff a fffffa a b tcpip sys tcpip sys a x ntoskrnl exe bc

A:BSOD after computer is loaded for around 3 minutes. ntoskrnl.exe

Hello and welcome Conqueror mate Imust tell you straight away I ma no expert at anything much and certainly notthat data you have listed. I have seen several references in other places andin Wikipedia to this ntoskrnl.exe being to do with HDD and RAM problems http://en.wikipedia.org/wiki/Ntoskrnl.exe

So what I might suggest is that yourun a drive test and then a memtest to eliminate them. I have looked for the WD test but the site is terribly convoluted but I think this is the one you want WD Support / Downloads / SATA & SAS / WD Black

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.htmlthisone you will need to make a bootable disk set the BIOS to optical (or USB ifpreferred) boot the machine and let it run for at LEAST 8 passes unless theerrors come up straight away. Takes fair time to complete and some leave itrunning overnight.

http://www.sevenforums.com/bsod-help-support/309145-bsod-after-computer-loaded-around-3-minutes-ntoskrnl-exe.html
Relevancy 54.18%

Hello recently I have just built my new computer and everything seemed to playing BSOD computer, while ntoskrnl.exe+7f1c0 using be going fine However I had gotten a BSOD when trying to copy a large amount of file from my external Although I BSOD while playing using computer, ntoskrnl.exe+7f1c0 didn't get the dump file of it as that wasn't BSOD while playing using computer, ntoskrnl.exe+7f1c0 in the settings at the time I assumed it was due to copying from the external and just copied smaller files and it hasn't happened again However I was just playing League of Legends and my computer decided to randomly BSOD So I downloaded SF Diagnostic Tool and zipped the folder so I was wondering as what the problem is BlueScreenView says the crash address is ntoskrnl exe f c and I wasn't sure if this was a hardware or BSOD while playing using computer, ntoskrnl.exe+7f1c0 software problem as I have only received the parts less than a week ago My specs are Gigabyte Z -D H motherboard Intel Core i - processor gig of Corsair Vengeance RAM GeForce GTX graphics card Any help would be greatly appreciated

A:BSOD while playing using computer, ntoskrnl.exe+7f1c0

Welcome aboard, Balvedius

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff6a000022640, 0, fffff80002eb4b2b, 5}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+1d1 )
At first, you are to run RAM - Test with Memtest86+ . run it for 8 passes.

As the crash is hardware related, you are suggested to take two more testsHardware - Stress Test With Prime95, and
run chkdsk/F/R, using the method two of the tutorial Disk Check.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/250256-bsod-while-playing-using-computer-ntoskrnl-exe-7f1c0.html
Relevancy 54.18%

HI my name is banby and i'm using this computer:

manufacturer: Dell
model :inspiron 570
processor : AMD ATHLON(TM) IIx2 250 processor 3.00 GHz
installed memory(RAM):4.00 GB (3.75 GB usable)
also, i'm using a windows 7 home premium sp1 64 bit.
well, since 2 months my computer is shutting down unexpectly and a blue screen appear.sometimes it happens 3 to 4 times a day. After researches in minidump repports,i found a that it was due to

*msahci.sys
*ntoskrnl.exe ...
now,i'm confused i don't know what to do to fix this issue
i also collected reports with sf diagnostic tool that i submitted with this post
thank you to help me

A:frequent BSOD on my computer due to ntoskrnl.exe+7cc40

Welcome aboard, banby.

► A lot of problem creators are there
Catalyst Control Center
Norton AntiVirus ; replace by Microsoft Security Essentials - Free Antivirus for Windows
PC Tools Registry Mechanic
Roxio Creator Starter
WinUtilities
Wise Care 365
► Some Dell Junks are also present there. Remove them up too.

Clean Up Factory Bloatware
► Free up the startup.

Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
► Finally, Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/255609-frequent-bsod-my-computer-due-ntoskrnl-exe-7cc40.html
Relevancy 54.18%

Hello all. I have, for the last few weeks, been getting bluescreens after having my computer on for a few hours. I can't remember the exact bluescreen error code, but I know it is a STOP error. I have included the output from DM Log Collector.

If you need any more information to help me debug this, just let me know. Thanks in advance!

EDIT: I have also now added the output from running WhoCrashed.

A:BSOD after using computer for up to 6ish hours - ntoskrnl.exe

Make it sure that the SSD is running with the latest firmware.
OCZ Toolbox and Firmware Update Releases
How to Upgrade OCZ SSD Firmware | StorageReview.com - Storage Reviews
Also Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall the program at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Let us know for any further BSOD.

____________________________________________

Code:
BugCheck F4, {3, fffffa8007caca60, fffffa8007cacd40, fffff800035d1130}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/362759-bsod-after-using-computer-up-6ish-hours-ntoskrnl-exe.html
Relevancy 54.18%

Hello,

I recently decided to build my first PC and after I booted up and installed drivers in bulk using the installation disks included, I would recieve random crashes every now and then. The blue screens usually happen about within 1-15 mins of me booting up the computer. If it passes that point I'm usually in the clear to use it as long as I want. Please help.

Thanks

A:Random BSOD on new computer build ntoskrnl.exe

As the starting point, please follow this post to disable Samsung Rapid mode.

Then report us for any further BSOD.
____________________________________________________

Code:
BugCheck F4, {3, fffffa800a9ca060, fffffa800a9ca340, fffff800033d3130}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/374487-random-bsod-new-computer-build-ntoskrnl-exe.html
Relevancy 54.18%

Hey everyone Im sorry if im incorrectly posting this but im new here! Ive seen many different posts regarding the ntoskrnl.exe bsod. But they all seem to be fixes for that exact case so i thought i would put mine and include the dmp.

I have a hp desktop with 3gb of ram and a upgraded version of windows 7.

A:BSOD at random times when not using computer, ntoskrnl.exe

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {fffff6fb80008000, ffffffffc000000e, 5d8f5880, fffff70001000000}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36c1a )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fb80008000, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000000e, error status (normally i/o status code)
Arg3: 000000005d8f5880, current process (virtual address for lock type 3, or PTE)
Arg4: fffff70001000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Code:
ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR: 0x7a_c000000e

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: smss.exe

CURRENT_IRQL: 0
Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

Hard Drive/Storage

Post a screen shot using Crystal Disk Info: CrystalDiskInfo Standard Edition

How to Upload and Post a Screenshot and File in Seven Forums

Make a hard drive test from the hard drive manufacturers website: Hard Drive Diagnostic Procedure

Basic checks: Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - How to Run Disk Check in Windows 7
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

http://www.sevenforums.com/bsod-help-support/290226-bsod-random-times-when-not-using-computer-ntoskrnl-exe.html
Relevancy 54.18%

Hope everyone else is having a good Christmas I first built this PC two years then got ntoskrnl.exe computer BSOD now hangs, Random ago late in the first years the PC worked great Random computer hangs, then now got ntoskrnl.exe BSOD not a single problem Then in early this year my computer started getting errors this was when I still had windows first it was random I O write errors which doesn t cause hang or BSOD it simply shutdown my computer automatically after a few seconds then I occasionally get BSOD Back then I had to prepare for my high school exams so I didn t look into it and thought it was just a windows bug So fast forward to now last month I bought the windows and did a complete clean reinstall give up on all Random computer hangs, then now got ntoskrnl.exe BSOD my old files And the problem is still here well not exactly the same problem My windows doesn t experience I O write errors any more instead it started hanging stop responding with multiple applications completely at random both in terms of which application and when it Random computer hangs, then now got ntoskrnl.exe BSOD happens the computer would also stop responding when these application hangs freezes the mouse moves but nothing happens when clicking on the items and the only thing to do is a hard reset However since its not a BSOD it doesn t create dump files for analysis Luckily last night the BSOD happened and I got a dump can someone help me pls now the hang is happening everyday its unbearable Event viewer and reliability monitor doesn t say anything specific just app hang or unexpectedly shutdown My reliability index is at much appreciated I have upgrade my PC since I had the PC problems for example - Radeon HD to x GTX in SLI - OCZ modxstream W to GS w psu from Corsair So I think we can rule out the above My full spec - Nzxt Phantom white red case - Ga-z x-ud -b motherboard - I k CPU overclocked at Ghz - Kingston Hyperx ram - GTX x in SLI - Corsair GS w PSU - Vertex GB SSD for windows - Kingston Hyperx k SSD for often used programs - x TB HDD in Motherboard Raid for games storage I have tried running memtest on my ram all of it passes no error I tried disable my CPU overclock too but the problems is still there

A:Random computer hangs, then now got ntoskrnl.exe BSOD

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD. I usually can't see this info in the reports, so I rely on you to check it.
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to. If involved these should be visible in the memory dump - but it doesn't hurt to check manually.



D: drive only has about 10% free space. Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance. Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a large performance penalty)

You have at least 5 hard drives. What is the age of your Corsair GS800 Power Supply?

Please update the Intel Management Engine (yours dates from 2010):





Try these links:
https://downloadcenter.intel.com/Det...ngine&lang=eng
https://downloadcenter.intel.com/Det...ngine&lang=eng
https://downloadcenter.intel.com/Det...ngine&lang=eng

If that doesn't work, then try these Lenovo links:
Intel Management Engine Interface Driver for Windows 8.1 (64-bit), 8 (64-bit) - Notebook
http://support.lenovo.com/en_US/down...DocID=DS032435

Finally, here's the link to the search I used:
https://www.google.com/search?q=inte...ient=firefox-a

FWIW - It's a feature that allows you to manage the BIOS features from within Windows (more technical stuff to be found here: Intel? Active Management Technology (Intel? AMT) Start Here Guide (Intel AMT 9.0) | Intel? Developer Zone )



Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web.

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Mon Dec 23 20:11:31.584 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\122413-147015-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime:0 days 4:36:19.234
Probably caused by :csrss.exe
BugCheck EF, {ffffe0000f139900, 0, 0, 0}
BugCheck Info: CRITICAL_PROCESS_DIED (ef)
Arguments:
Arg1: ffffe0000f139900, Process object or thread object
Arg2: 0000000000000000, If this is 0, a process died. If this is 1, a thread died.
Arg3: 0000000000000000
Arg4: 0000000000000000
PROCESS_NAME: csrss.exe
BUGCHECK_STR: 0xEF_f7e57c0
FAILURE_BUCKET_ID: 0xEF_f7e57c0_IMAGE_csrss.exe
CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: 3310
BIOS Version F10
BIOS Release Date 02/21/2012
Manufacturer Gigabyte Technology Co., Ltd.
Product Name Z68X-UD4-B3
??????????????????????????????????????????????????????????????????????????????????????``



3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.

Code:
**************************Mon Dec 23 20:11:31.584 2013 (UTC - 5:00)**************************
HECIx64.sys Tue Sep 21 12:59:04 2010 (4C98E458)... Read more

http://www.eightforums.com/bsod-crashes-debugging/37758-random-computer-hangs-then-now-got-ntoskrnl-exe-bsod.html
Relevancy 54.18%

hello i have recently been having some problems with my new-ish gaming pc it keeps restarting by itself bluescreenview blames ntroskrnl i have ran tests and the gpu cpu ram and hard drive all perform normally and have no errors and also perform at a good temprature i returned to the company and they said they couldnt get blames , it's reboots ntoskrnl but says , bsod Computer a it to crash reboot but as soon as i got it back it happened again could it possibly be something wrong with the power supply or motherboard thanks in advance I've also checked all my Computer reboots , but says it's a bsod , blames ntoskrnl peripherals I've used different keyboard and mouse it crashed without wireless adapter or Ethernet cable I've tried new headphones and even a new power cable It doesn't come up with a bsod just looks like a reboot here is what bluscreenview says - - dmp x fffffa ntoskrnl exe ntoskrnl exe b efc NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation win sp gdr - x ntoskrnl exe b efc C Windows Minidump - - dmp specs FX ghz zotac GTX gb ram tb hard drive gigabyte lmt usb motherboard Aerocool Integrator W

A:Computer reboots , but says it's a bsod , blames ntoskrnl

Someone please help Loool ������

http://www.sevenforums.com/bsod-help-support/375997-computer-reboots-but-says-its-bsod-blames-ntoskrnl.html
Relevancy 53.75%

Hi, Ive started to have BSOD and its constantly doing it everytime I restart and use the internet. Here is the "Minidump" folder

A:My computer is starting to have BSOD, error 0x0000000a ntoskrnl.exe

  
Quote: Originally Posted by dxchito


Hi, Ive started to have BSOD and its constantly doing it everytime I restart and use the internet. Here is the "Minidump" folder



No attachments uploaded try this method.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/205849-my-computer-starting-have-bsod-error-0x0000000a-ntoskrnl-exe.html
Relevancy 53.75%

Hi there I recently built my first computer and have been having problems with it ever since The BSOD using ntoskrnl.exe card, 0xF4 on new computer network while problem typically occurs when the computer boots up and attempts to connect to my home wifi where it will hang freeze up completely eventually BSOD or just BSOD straight away The problem does not occur when using a cellphone to provide internet Because of this I foolishly BSOD on new computer while using network card, 0xF4 ntoskrnl.exe thought it was an issue with my router which was years old - replacing this did not fix it For what little I tested it for for some reason the computer was using a ridiculous amount of bandwidth it seems to work fine using a T-stick to get mobile broadband I have tested the network card in my boyfriend's build where it works fine I have tested his identical network card in my build where if I recall correctly it had problems Forgive me for being forgetful as I did a lot of these tests a couple of weeks ago and was having such a diverse range of crashes that I can't remember what caused what I've run the build without the graphics card but that had no luck The HDD and SSD have both been tested using Hard Disk Sentinel and came up perfect I'm currently running Driver Verifier but it's just showing a black screen I'm not sure if this is normal or not Using WhoCrashed says that it's probably ntoskrnl exe and suggests that it's not a hardware problem but a typical driver issue I would be so grateful if someone could please look over the logs as I can't seem to solve this myself Thanks in advance

A:BSOD on new computer while using network card, 0xF4 ntoskrnl.exe

Code:
Host Name: NOMMY
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Tessa
Registered Organization:
Product ID: 00426-OEM-8992662-00497
Original Install Date: 11/07/2013, 9:37:19 p.m.
System Boot Time: 1/08/2013, 8:09:43 p.m.
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: H87M-D3H
System Type: x64-based PC
Post this report:Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/299687-bsod-new-computer-while-using-network-card-0xf4-ntoskrnl-exe.html
Relevancy 53.75%

When I use my computer normally (as in, just browsing the internet), my computer will often lock up, then restart. I did not think it was a BSOD at first, but occasionally I would actually get the bluescreen, and crash dump files were created.

A strange thing about this BSOD is that I never get it while playing games. The sole exception is the game Path of Exile, but since no dump file is created after a Path of Exile crash, it is probably a separate problem. This problem only occurs while I am doing something mundane that does not use my processor power/memory, apparently.

Here's my Diagnostic .zip. Hopefully one of you guys can enlighten me on what the problem is.

A:BSOD during regular computer use, hal.dll+12a3b & ntoskrnl.exe+18c453

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try


Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\USER\Downloads\SF_Logmore\SF_27-10-2013\102713-30716-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038aa6d0
Debug session time: Sun Oct 27 22:53:06.071 2013 (UTC + 6:00)
System Uptime: 0 days 0:08:21.804
Loading Kernel Symbols
...............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8007e32028, f2000040, 800}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007e32028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000f2000040, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000800, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: firefox.exe

CURRENT_IRQL: f

STACK_TEXT:
fffff880`02fdda58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`07e32028 00000000`f2000040 : nt!KeBugCheckEx
fffff880`02fdda60 fffff800`037f3453 : 00000000`00000001 fffffa80`07e33d30 00000000`00000000 fffffa80`07e33d80 : hal!HalBugCheckSystem+0x1e3
fffff880`02fddaa0 fffff800`03630700 : 00000000`00000728 fffffa80`07e33d30 fffff880`02fdde30 fffff880`02fdde00 : nt!WheaReportHwError+0x263
fffff880`02fddb00 fffff800`03630052 : fffffa80`07e33d30 fffff880`02fdde30 fffffa80`07e33d30 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`02fddc50 fffff800`0362ff0d : 00000000`00000004 00000000`00000001 fffff880`02fddeb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`02fddc90 fffff800`03623e88 : 00000000`00000020 fffff880`009b0590 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`02fdd... Read more

http://www.sevenforums.com/bsod-help-support/309747-bsod-during-regular-computer-use-hal-dll-12a3b-ntoskrnl-exe-18c453.html
Relevancy 53.75%

Hey guys,

I randomly get BSOD while playing a game or just doing nothing but listening to music and watching youtube videos. My drivers are all up to date. I uploaded a file which i made with SF Diagnostic Tool. My computer specs are written on my profile too. It's getting annoying and I don't have a solution for this because I don't know if it's the software or hardware. I've been in several forums in order to find any solutions... found nothing.

Please help!

A:Random Bluescreens - ntoskrnl.exe (Computer is really loud while BSOD)

Hi Blizzii,

I've checked the 'Event Logs' and they look clean. 'Crash Dump' detects BugCheck Code '0x00000124' caused by 'ntoskrnl.exe' driver; please refer to this 'article' and follow the suggested steps: Stop 0x124 - what it means and what to try

I could also see the following errors in 'Windows Update logs':

Code:
2013-02-17 12:41:18:585 896 edc DnldMgr FATAL: DM:CAgentDownloadManager::LoadUpdateMetadataFromDatastore: GetUpdates failed with 0x80248007.
2013-02-17 12:41:18:585 896 edc DnldMgr * WARNING: Exit code = 0x80248007
2013-02-17 12:41:18:585 896 edc DnldMgr FATAL: DM:CAgentDownloadManager::RestoreDownloadJobs: RestoreDownloadJob failed with 0x80248007.
2013-02-17 12:41:18:585 896 edc DnldMgr FATAL: DM:CAgentDownloadManager::LoadUpdateMetadataFromDatastore: GetUpdates failed with 0x80248007.


2013-02-27 21:04:22:919 1228 17d4 COMAPI FATAL: Unable to initiate asynchronous installation successfully. (hr=80240016)
2013-02-27 21:04:27:914 468 dac Report REPORT EVENT: {6D653856-E810-42BB-B46E-E6FA4841A352} 2013-02-27 21:04:22:915+0100 1 162 101
'Microsoft Security Essentials' seems to have been installed recently. If another 'anti virus / security software' is also installed, try uninstalling it and recheck results. The issue could also be due to a Maware. Try running a scan using this link and see if something is detected: Free Malware Removal Tool | Anti-Malware Scan Software

You may also try the following 'Microsoft Fixit'; and try updating 'Windows' to see if anything changes. Also observe the system for any crashes: Temporary connection-related errors may occur when you use Windows Update or Microsoft Update

Hope this helps.

http://www.sevenforums.com/bsod-help-support/280315-random-bluescreens-ntoskrnl-exe-computer-really-loud-while-bsod.html
Relevancy 53.75%

I have an HP TouchSmart 620-1110, running Windows 7 Home Premium edition, 64bit. For the last few days, the computer has been shutting itself down overnight from sleep mode. So far, this only happens when the computer is asleep. I have attached the SF Diagnostic information. My wife's HP TouchSmart 610 was having the same problem a few weeks ago. Desprague discovered a couple of old drivers which fixed her computer's problems. I'm hoping for another miracle for my computer! Thanks for your help.

OS: Microsoft Windows 7 Home Premium, version 6.1.7601 SP 1 Build 7601
CPU: i7-2600 @3.40 GHz
RAM: 16.00 GB
Display: AMD Radeon (TM) HD 7670A Graphics

A:BSOD occurs when computer asleep, involving ntoskrnl.exe

Welcome to the forums sboast,


Code:
BugCheck 9F, {3, fffffa800d774a10, fffff80000b9c3d8, fffffa8010d6f390}

*** WARNING: Unable to verify timestamp for bcmwl664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl664.sys
Probably caused by : bcmwl664.sys
It appears that device object has been blocking any further IRPs from being processed.


Code:
0: kd> lmvm bcmwl664
start end module name
fffff880`06eba000 fffff880`07344000 bcmwl664 T (no symbols)
Loaded symbol image file: bcmwl664.sys
Image path: bcmwl664.sys
Image name: bcmwl664.sys
Timestamp: Tue May 08 07:50:46 2012 (4FA8C246)
CheckSum: 004890EA
ImageSize: 0048A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
It seems your Broadcom 802.11g Network Adapter is a possible cause, please update the driver from here - Downloads | Broadcom

http://www.sevenforums.com/bsod-help-support/296251-bsod-occurs-when-computer-asleep-involving-ntoskrnl-exe.html
Relevancy 53.32%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 53.32%

Hey Everyone This is a new system build and it was working fine until a week after I had built it The first blue screen I got was when I was uploading a video to youtube and now I seem to get them randomly fairly often apart from when I m playing games which is odd just browsing the internet etc So far I ve done tests on my hard drives to see if they re healthy and they have passed HD Tune however I seem to always get blue screens when I try and upload a video to youtube from either of the hard drives I ve tried them plugged in one at a time but it doesn t blue screen when I upload from the SSD on its own this could just be a coincidence though as it blue screened with just the SSD in when I left the computer idle overnight I ve run memtest on my ram which didn t come up with any errors and I ve re-seated it just to check if it was okay I ll upload a dumps New ntoskrnl.exe? crash Computer BSOD Build Multiple zip of my Minidump now using BlueScreenView seems to point towards ntoskrnl exe but this is my first time using BlueScreenView so I m not sure if that s common or w e Another thing to add is that I seem to get program instability e g steam closing when it feels like it and chrome crashing for no reason however playing the mmo neverwinter seemed to work fine located on a different drive to the OS SDD Win Ultimate x I - BSOD New Computer Build ntoskrnl.exe? Multiple crash dumps K MSI z -g Crucial x GB mhz Ballistix RAM Samsung Pro SSD x Seagate rpm tb HDD s Asus Xonar d x Soundcard Corsair CX W MSI Geforce GTX Any help would be greatly appreciated

A:BSOD New Computer Build ntoskrnl.exe? Multiple crash dumps

There seems to be a problem with your Windows activation. Please post this report: Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/303353-bsod-new-computer-build-ntoskrnl-exe-multiple-crash-dumps.html
Relevancy 52.89%

BSOD random, probably under heavy load situations. I dont know how to do.


DM log collector file attached

many thanks

A:BSOD random most times ntoskrnl.exe+748c0 and ntoskrnl.exe+74ec0

Hi berdini.


Code:
DEFAULT_BUCKET_ID: GS_FALSE_POSITIVE_MISSING_GSFRAME
Scan the system for possible virus infection with the following programs.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Let us know the results.
____________________________________

Code:
BugCheck F7, {fffff8800a01ff08, f8800125d135, ffff077ffeda2eca, 0}

Probably caused by : Ntfs.sys ( Ntfs!_report_gsfailure+26 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/373211-bsod-random-most-times-ntoskrnl-exe-748c0-ntoskrnl-exe-74ec0.html
Relevancy 52.89%

Hi to make things easier for you dxgmms1.sys,ntoskrnl.exe,Ntfs.sys BSOD Address:ntoskrnl.exe+75bc0; below is the Bug Check String Driver and crash address SYSTEM SERVICE EXCEPTION dxgmms sys ntoskrnl exe bc MEMORY MANAGEMENT ntoskrnl exe ntoskrnl exe bc SYSTEM SERVICE EXCEPTION ntoskrnl exe ntoskrnl exe bc NTFS FILE SYSTEM Ntfs sys ntoskrnl exe bc IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc unrelated how could I make nice table above I have searched the forum Problem BSOD randomly usually graphics related eg flash games in chrome graphics related software Mathematica Problem I use an internet usb G device to connect to internet Every morning the device will not connect to internet and computer will hang on shutting down screen when I BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys restart I have to manually turn off and back on again I think this may be a dying capacitor on motherboard that needs boot's to get excited Problem Chrome quot aw snap quot happens regularly and is usually flash content related even ad banners seem to cause it from time to time I have reinstalled chrome checked plugins etc etc no luck Internet explorer runs stable but for example in flash games it seems to momentarily freeze and then catch up BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys with itself again These are moments where I think chrome would have crashed Things I've done SFC scan All's well Memtest I did pass it took an hour everything fine Will put it on over night tonight Checked for latest drivers Also have latest BIOS Checked win update Ran Intel Burn everything ok max stress over Gb RAM run min max temp thank you Noctua NH-C P this is with quiet adaptor too lol Ran malwarebytes found nothing toxic Ran SSDlife Free health SSD seems fine Bought a new motherboard assuming that the current one is going bad I haven't switched over to it yet and thought I should investigate a little further before I do ie bad RAM CPU Power Supply SSD CPU seems fine RAM passed test but will test further My own quot opinion quot until today was that there is a fault on motherboard probably with usb hardware Now I realise that it could be the power supply but I have no way to test this bar buy a new one My analysis bad motherboard or bad PSU Either way not getting away with cheap fix methinks UPDATE I enabled verifier exe using this Driver Verifier - Enable and Disable Windows crashes just before going to desktop I had to boot last known config to get up and running again IE I CAN RELIABLY CREATE BSOD USING VERIFIER EXE WITH GIVEN INSTRUCTIONS So I am going to try focusing on drivers loaded at startup by process of elimination Is there a quick way to find out which one Below is the Check String Driver and crash address for the BSOD's when using verifier exe IRQL NOT LESS OR EQUAL ntoskrnl exe ntoskrnl exe bc DRIVER IRQL NOT LESS OR EQUAL RNDISMPX SYS RNDISMPX SYS a UPDATE If I choose or more non Microsoft drivers in verifier exe I get BSOD different check strings but always at the same address Also computer seems more unstable since engaging with verifier exe I feel I have given a thorough evaluation based on information in this forum and would appreciate feedback from those with more expertise than I UPDATE Another Memtest gave errors on pass Questions any chance poor power supply can cause this anyone have experience increasing voltage to make this go away would bad RAM explain all my problems ok fine i'll go through RAM and the slots and find the bad one sigh major sigh positively tragic sigh UPDATE Started with slot with stick of RAM Did memtest but had an idea I turned on verifier exe with all rd party drivers selected and my theory was to replicate the BSOD I got earlier at startup Went through each slot each RAM combo's of RAM and then to add insult to injury with all sticks in exactly same as before no BSOD Life is tough So maybe RAM wasn't properly seated all this time or maybe I need to test the RAM proper... Read more

A:BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys

**************UPDATE 5 ****************




The sequence of events went as follows.
RAM test 1 pass was passed. Verifier.exe caused immediate BSOD on windows start when activated. Trying to hunt down drivers revealed any combo of 3 or more drivers gave BSOD at startup. Randomly decided to recheck RAM. Failed memtest after 27 minutes pass 1. Found one RAM stick that passed after one pass slot0. Got fed up of waiting for other slot's. Devised a plan to use verifier to check the RAM by seeing which combo's of RAM sticks gave BSOD on startup. All combo's passed. And now verifier does not give BSOD on any setting. Began to hate life. Cheered myself up with prospect of sleep. Put all 16 Gb RAM in properly and ran mentest for 18 hours, 6 passes. No error. Still no verifier.exe errors when enabled. Wrote this update.


If RAM failed after 27min one test, and then after swapping around a retest of 18 hours has no error, one would presume the RAM may be ok. Equally, I believe one could say the RAM is suspect. So, if the test is failed it really doesn't tell us anything except there is a problem somewhere. But we know there is a problem since we have BSOD!!! If I hadn't rerun the test I wouldn't question the RAM.

So the question is: how do I categorically ensure that a stick of RAM is good? Is memtest on RAM with an alternative working computer enough?



In summary:

I ran memtest for 18 hours, which was 6 passes. No problems detected. Using verifier.exe with protocols given on this forum I no longer get BSOD.

Currently my hypothesis is that the RAM was never seated correctly, or given that it takes a bit of force to insert correctly into motherboard, the flexing has at least temporarily defused whatever fault was causing my BSOD. Tenuous I know. But I really have no other explanation other than something somewhere on the motherboard or power is failing, or even the RAM.

http://www.sevenforums.com/bsod-help-support/351171-bsod-address-ntoskrnl-exe-75bc0-dxgmms1-sys-ntoskrnl-exe-ntfs-sys.html
Relevancy 52.89%

Jan , Crash Address All !! BSOD ntoskrnl.exe+80640 the Time ntoskrnl.exe ------------------------------------------- How to Solve - I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state original windows - Never installed Norton internet security again I'm using Microsoft Security Essentials now - Updated my Graphic Card Driver Intel Wifi Driver Sound Card Driver And some other drivers It's been two months now with no BSOD Thanks to dear Arc and gregrocker Thank you guys ------------------------------------------- Oct ------------------------------------------- Hi guys It's almost a year that I have problems with BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640 BSODs it use to be Atikmdag BSOD but I solve that with updating my Graphic card Driver and Changing Atikmdag sys file in Windows System folder But now it's about months that I get ntoskrnl exe BSODs in lot's of situations Web surfing Windows log on Working with Unity Working with files and Really lot's of Times Even in Safe Mode with Networking I guess it's because of my Network driver because I got BSOD in Safe Mode with Network but I never got a BSOD in normal Safe mode BTW I dunno how to solve it Please Help me these BSODs are sooooooooo annoying Here is my System Specs It's Msi GX CPU Intel R Core TM i CPU M GHz Main MICRO-STAR INTERNATIONAL CO LTD MS- Bios BIOS Date Ver Memory GB HDD ST AS ATA Device Sound Card AMD High Definition Audio Device High Definition Audio Device Graphic ATI Mobility Radeon HD Series - GB GDDR OS Microsoft Windows Ultimate -bit Multiprocessor Free Service Pack it's weird that I've finished writing this without a BSOD Here is the Zip file Created with SF Diagnostic Tool

A:BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640

Code:
fffff800`00b9cc48 fffff880`010b75fcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4b5fc
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Alcohol 120% at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next uninstall Virtual CloneDrive, as vclone.sys is as fatal as SPTD.sys, too.
After doing these two, report the situation back.

http://www.sevenforums.com/bsod-help-support/309093-bsod-ntoskrnl-exe-all-time-crash-address-ntoskrnl-exe-80640-a.html
Relevancy 52.89%

I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and forth between them quite often.

I've tried the SFC command and it didn't find anything. I used BlueScreenViewer but not a lot of help. All drivers for sound and video have been updated. I've also updated the firmware to the Crucial M4 SSD version 040H.

Any insight would be great.

Specs:
Laptop - HP EliteBook 8560w
CPU - Intel i7-2670QM
RAM - Hynix/Hyundai 8.0 GB Ram
SSD - M4-CT256M4 SSD
Audio - AMD High Definition Audio
Video - AMD FirePro M5950
OS - Windows 7 Pro 64-bit

A:Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0

Update the firmware of your Crucial M4-CT256M4SSD2.

And, Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus and touchpad driver SynTPEnh.
Apply > OK
Accept then restart.
Let us know the results.

http://www.sevenforums.com/bsod-help-support/281927-random-bsod-reporting-ntoskrnl-exe-75c40-ntoskrnl-exe-7efc0.html
Relevancy 52.89%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 52.89%

Got my first blue screen of death tonight had firefox opened one watching youtube video another browsing internet After bsod /adress (ntoskrnl.exe+72a40) caused by driver (ntoskrnl.exe) BSOD it restarted i login but just black screen with cursor ctrl alt delete worked so i shut my computer down Boot up normally after check my minidump file bsod cause BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) by ntoskrnl exe Did little search on google find BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40) has to do with ram and hard drive Downloaded wd data life guard diagnostic for my mechanic drive which is healthy but my ssd on shows failed end to end error rate value threshold worst is all in SMART statue Im not sure if i can trust this wd diagnostic on my crucial ssd there are alot of unknown in SMART statue too Theres no ssd diagnotic for crucial there is a firmware not sure if it helps So i downloaded and ran crystaldiskinfo on my ssd health statues says good it doesnt say end to end error rate like wd Instead same ID B line says quot unused reserve nand blocks quot instead Is my ssd good i havent ran a test on my ram yet This is almost month old build Asrock x x killer i k gtx w crucial x gb crucial gb ssd wd blue tb Heres info of bsod with bluescreenview Bug Check String- IRQL GT ZERO AT SYSTEM SERVICE Bug Check Code - x a Parameter - dc a Parameter - Parameter - Parameter - fffff b Caused By Driver- ntoskrnl exe Caused By Address- ntoskrnl exe a File Description- NT Kernel amp System

A:BSOD caused by driver (ntoskrnl.exe) /adress (ntoskrnl.exe+72a40)

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/367819-bsod-caused-driver-ntoskrnl-exe-adress-ntoskrnl-exe-72a40.html
Relevancy 52.46%

When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off.
Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now.
Attachment 315989
Thanks
Also, sorry for my bad english.

A:BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a

Your HUAWEI Mobile Connect driver is causing issues here.


Code:
*** WARNING: Unable to verify timestamp for ew_jubusenum.sys
*** ERROR: Module load completed but symbols could not be loaded for ew_jubusenum.sys
Probably caused by : ew_jubusenum.sys
If it's a necessary driver then update it but if not then please completely remove it.
I'm not that familiar with such devices but it should be under Network Adapters, right click on the device and click properties, then click on the driver tab and update.


Code:
fffff880`015e0000 fffff880`015fc000 ew_jubusenum T (no symbols)
Loaded symbol image file: ew_jubusenum.sys
Image path: \SystemRoot\system32\DRIVERS\ew_jubusenum.sys
Image name: ew_jubusenum.sys
Timestamp: Mon Aug 20 01:55:56 2012 (50318B1C)
CheckSum: 0001CF99
ImageSize: 0001C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.sevenforums.com/bsod-help-support/330151-bsod-when-goes-sleep-ntoskrnl-exe-e96d2-ntoskrnl-exe-81e7a.html
Relevancy 51.6%

I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere.

So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests without error.

I have enabled driver verifier (following the guide on this site) and this has not caused anynew BSOD's.

I also get a random BSOD on startup but it has happened so infrequently i have been unable to boot with disable automatic restart on system failure enabled to capture the stop code.

I really could do with some expert advice please.

This is my first post so i apologise if i have missed something important but i have tried to read as much info as possible before posting.

A:BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40

Unusual one you got there think it may be a windows problem please run sf tool and upload all files not just dumps and try running an sfc scan
SFC /SCANNOW Command - System File Checker option 2

Check system temperatures also

http://www.sevenforums.com/bsod-help-support/281212-bsod-ntoskrnl-exe-7efc0-ntoskrnl-exe-75c40.html
Relevancy 51.6%

Hi there,

Recently I've been getting BSOD while playing WoW. I'm not sure what details to give other than the dump so I'll just tell you about my computer:

Intel i5 4690 3.5-3.9 GHZ
EVGA GTX 970 SSC (super superclocked - the fans are designed not to turn on until card reaches 60c)
16gb Hyper X Fury ram
1tb WD Black HDD
Windows 7 OS

I noticed that I haven't crashed yet while EVGA Precision X is up (it has a custom aggressive fan curve I made). Maybe this has to do with the fact that it replaces fan drivers, or something? I don't know. I'm pretty clueless as to what's going on because all these parts are pretty new and it only recently started, but it's crashed three times today. Here are the dumps.
Any help you guys can give would be greatly greatly appreciated. Thanks a ton!
 

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

Any ideas? It happened again while using EVGA Precision.
 

https://forums.techguy.org/threads/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.1145229/
Relevancy 51.6%

Hello Recently I got a few bluescreens while playing World of Warcraft which I thought was very weird because all of my hardware is pretty new Here is some info about my computer Intel i - GHZ EVGA GTX SSC super superclocked - the fans are designed not to turn on until card reaches c gb Hyper X Fury ram tb WD Black HDD Windows OS At first I noticed three bluescreens then I used EVGA Precision X with a custom aggressive fan profile and BSOD ntoskrnl.exe+74ec0 ntoskrnl.exe address the problem went away temporarily but then the computer crashed later on I'm not sure if that's relevant or not I ran a diagnostic on my harddrive and processor and both were fine The RAM seems more difficult to test because it said something about usb drives so I decied to stray away from that unless it was absolutely necessary and then get help from someone who BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0 knows what they're doing I am going to upload the dump files that were saved by bluescreenview Any help at all would be greatly appreciated

A:BSOD ntoskrnl.exe address ntoskrnl.exe+74ec0

CRITICAL_OBJECT_TERMINATION BSODs (0xf4) are usually related to an issue with the hard drive.

If you have an SSD, make sure that the firmware is upgraded.

If HDD, run SeaTools for DOS, LONG test - Hard Drive (HDD) Diagnostics - Sysnative Forums

Regards. . .

jcgriff2

`

http://www.techsupportforum.com/forums/f299/bsod-ntoskrnl-exe-address-ntoskrnl-exe-74ec0-975273.html
Relevancy 51.6%

i am having this problem after i change my video cards i upgraded a 460 SLI to a 680
i have run 3dmark11 to try to replicate the bsod or something and nothing happends
i clean my hardware and change the thermal compound then i played some bf3 and paff the same bsod =(

pd: sorry for my english
i forgot to say that i have the last beta drivers from nvidia because with the WHQL i was having problems in gw2
Attachment 231326

A:BSOD playing bf3, hal.dll hal.dll+12a3b , ntoskrnl.exe ntoskrnl.exe+18

Welcome

For the bug check you're getting go through:
Stop 0x124 - what it means and what to try

Also get a latest version of your BIOS.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Yusra\Downloads\Fayer\SF_11-09-2012\091112-23509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03667000 PsLoadedModuleList = 0xfffff800`038ab670
Debug session time: Wed Sep 12 06:29:05.072 2012 (UTC + 6:00)
System Uptime: 0 days 7:04:57.025
Loading Kernel Symbols
...............................................................
................................................................
................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80086cf028, ba000000, 400405}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : hardware

Followup: MachineOwner
---------

5: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80086cf028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`030acb58 fffff800`03630a3b : 00000000`00000124 00000000`00000000 fffffa80`086cf028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`030acb60 fffff800`037f3b03 : 00000000`00000001 fffffa80`0860b890 00000000`00000000 fffffa80`0860b8e0 : hal!HalBugCheckSystem+0x1e3
fffff880`030acba0 fffff800`03630700 : 00000000`00000728 fffffa80`0860b890 fffff880`030acf30 fffff880`030acf00 : nt!WheaReportHwError+0x263
fffff880`030acc00 fffff800`03630052 : fffffa80`0860b890 fffff880`030acf30 fffffa80`0860b890 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`030acd50 fffff800`0362ff0d : 00000000`00000008 00000000`00000001 fffff880`030acfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`030acd90 fffff800`03623e88 : 0000003b`5e9a7a72 fffffa80`0ae15ac8 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`030acdc0 fffff800`036e4aac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`030acdf0 fffff800`036e4913 : 00000000`00000000 00000... Read more

http://www.sevenforums.com/bsod-help-support/252352-bsod-playing-bf3-hal-dll-hal-dll-12a3b-ntoskrnl-exe-ntoskrnl-exe-18-a.html
Relevancy 51.6%

Does anyone have any idea what could be causing these BSOD errors? It started with the +74200 error about a month ago (enduser is just now informing IT) and now it is the +73c40. I've already done several Memory tests to no avail. I'm about to just
reimage but don't want to if it's just a driver issue. 

Thanks
TravisD

https://social.technet.microsoft.com/Forums/en-US/afea0b11-7904-4025-8dd6-c76d6cfa02d8/ntoskrnlexe74200-amp-ntoskrnlexe73c40-bsod?forum=w8itprogeneral
Relevancy 51.6%

Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.

A:BSOD ntoskrnl.exe+26ee0 ntoskrnl.exe+7cc40

  
Quote: Originally Posted by postal


Hi, I've been having this BSOD appear very randomly.

IRQL_NOT_LESS_OR_EQUAL 0x0000000a
(all reports in .rar file)

Sometimes within 1 hour, other times as long as 24hrs+. I've got my BIOS/Drivers up to date for my CPU, Graphics Card, and Motherboard. I've rigorously tested my memory and have never had any issues arise.

It has occurred during
3d gaming,
when the system has been idle,
also when browsing with firefox or ie.

Any help at all would be appreciated, I've struggled with this BSOD for years I would love to finally find whats causing it.

Thank you.


First lets start with asacpi.sys yours dated 2005
1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).

http://www.sevenforums.com/bsod-help-support/194256-bsod-ntoskrnl-exe-26ee0-ntoskrnl-exe-7cc40.html
Relevancy 49.88%

Well I built this computer in september of everything was running great no problems at all until today I left it on and went between Custom 1077... computer. error BSOD. or 0 unknown error built to the store came back and BSOD My computer restarted before I could write down any information quot Error code quot system restore said it was BSOD. error Custom built computer. error unknown between 0 or 1077... a quot unknown error quot which terminated my system My Computer is running fine but I would like to make sure nothing is wrong I'm thinking it may be my mother board because one of the SATA slots is broken and I had to switch to another one System specs Cpu Core i k OS windows vista home premuim bit Motherboard Asrock p extreme Memory gb Corsair vengence quot will increase to as well quot Harddrive TB Graphics card GT quot will upgrade when BSOD is solved quot If you need anymore information I have the app on my phone and should be able to response quickly The resource and Performance monitor file says I have no Anti-virus program but I do Also says the only thing that failed was system service checks - abnormally terminated service check

A:BSOD. error Custom built computer. error unknown between 0 or 1077...

Here is the Full resourse and performance file

http://www.sevenforums.com/bsod-help-support/210705-bsod-error-custom-built-computer-error-unknown-between-0-1077-a.html