My Hp Pavilion g tx did not pose any problems for years But a week ago I upgraded my RAM from to gb The shopkeeper inserted hynix gb nbsp ddr ram So Can Other... one I ram 8gb 4g in to my slot. upgrade memory ram that makes two rams in my loptop nbsp - Samsung Came when I purchased laptop years ago - gb ddr Hynix b ddr nbsp After a week my laptop stoped working Showing it two service center they said one of my nbsp memory slot is damaged and can't be used nbsp So now I had only one memory slot active with gb ram inside it My Question nbsp is - CAN I INSERT GB RAM IN ONE MEMORY SLOT SINCE OTHER ONE IS DAMAGED nbsp OF MY PAVILION G TX MOTHERBOARD nbsp If yes then please tell me - Of what type of ram should I be looking for Sepecification From where should I buy Crucial got gb ram which I can't usePlease reply ASAP nbsp Thanks amp RegardsPrince Sonihttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Can-I-upgrade-my-4g-ram-to-8gb-ram-in-one-memory-slot-Other/td-p/5714534
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
1. Expansion SlotWhat is the expansion slot specification for this model as we would like to add a dedicated graphics card with DisplayPort ? 2. MemoryHow many memory slots does it have on the motherboard ?What type of memory is required ?What is the maximum memory supported on the motherboard ?
Go to Solution.
Ok, Sorry looking up the model at Kingston and a couple other sites didn't show your computer and seeing I hadn't seen any I was confused. Based on what I have found maybe a Model from other country. With that said it looks like it comes with 2gig DDR3L Ram and is Upgradable to 8Gig Also looks like yours comes With 1 PCI Express x16 Slot. I am not sure with the PSU and with that slot if you would be able to upgrade to a different Graphics Card. GPU and size of case would put a huge limit on what could be able to fit... Jameshttp://community.acer.com/t5/Aspire-Desktops/XC-704-Expansion-Slot-amp-Memory-Upgrade/td-p/392919
Hi, can anyone tell me how to access the second slot in my e-system 1511. I was told it was under the keyboard. I can unclip the clips but there seems to be something else holiding it down. I ve looked at the back and can see no screw with kb next to it to indicate that, that is the screw for the keypad.
Appreciate any advice. I have upgraded the first memory. I ordered 2gb and this came in two of 1gb so I am assuming there is a second slot.
yes or no ?? will this have a bad effect on the computer ?/ any info is appreciated
When inserting memory module on the memory slot it was not aligned properly. When i turn on the power i noticed smoke and i immediatly turned off the power. Removed memory module and half of it was burnt, now my question is the memory slot damaged? Because its slightly burned in the inside slot, could i install a new memory module in that particular slot? or do i have to change the memory slot thats on the mother board?
You are probably lucky if you didn't kill the whole board. The slot is most likely toast. If you were brave enough to try another stick in the same slot, it may not work, or it may burn-up something else. I don't think changing the slot is really an option. Motherboards are not exactly repairable items.
other day my computer made loud long Beeps at Post Google listings said dram problem I normally run gb of ram in a - configuration I removed the card from B and then my system started fine with just one card in A wondered if it was just the card its-self so I placed the removed card into slot A still started up fine with just one card original B card installed in A then I placed other card which was originally in slot A into slot B to be memory bad slot B1??? back to - again back to long Beep at Post again as long as i leave B empty then my system starts fine motherboard manual says i have to have a card in A and B for duel channel to work--- right now i only got gb showing on start up page looked at System Device Manager and found a funny thing no yellow markers shown but -----all my Nvidia nForce bad memory slot B1??? Ware slots bad memory slot B1??? show quot no driver installed for this device quot but under the quot driver tab quot each shows the driver name and version listed driver update wizard for each said quot the correct driver software program was installed quot ran quot scan for hardware changes quot --- found nothing here is list ---Direct Memory Access Controller bad memory slot B1??? High Precision Event Timer nForce Memory Controller listed twice Numeric data Processor Nvidia nForce PCI System Management PCI Standard RAM Controller listed times Programmable Interrupt Controller System Timer all with no driver installed but driver name and version listed under driver tab did go to Nvidia and run their motherboard driver tool downloaded recommend program and after install and reboot no changes is my B ram slot problem a side effect of hinky windows os over time or is it just my motherboard dying of old age power supply old age should i do a complete clean reinstall of Vista ran Repair from my OEM disk which says no repairs needed build data---- P N-D ASUS motherboard GB Western Digital blue SATA HD No-Raid Intel socket Core Duo CPU Nvidia DDR GT GPU OCZ DDR mhz RAM running at GB at present time OCZ watt Power Supply Vista OS i built system in with no major problems until now replaced DVD drive and Viewsonic monitor---both quit working over last few years sorry about the edit have new DVD drive and monitor for awhile nbsp
I was told by Lenovo that one slot will accomodate 1 gig of memory, instead of using 2 half gig sticks. I was also told about something called "memory boost" as an external memory source to increase memory. has anyone heard of this? I want to run PhotoshopCS and need 1 GIG of memory and don't want to get new motherboard(the machine is long out of warantee). can anyone help on this issue?
"readyboost" is a feature only available for Vista, where it can use a USB memory stick as an alternative to paging back to the hard drive, it's not really in place of RAM.
I have a Dell Inspiron 6000 laptop and run Windows XP. my memory card slot recently stopped working. I used to be able to insert my memory card from my digital camera and download my pictures and now it no longer works. It doesn't even show up under My Computer under removable storage. Please help!
Put a card in it and:
Look in Control Panel - System - Hardware - Device manager
Expand the "Universal Serial Bus controllers" and see if a USB mass storage device is listed.
Also look to see no yellow ? or ! are shown, indicating missing drivers.
actually, i was used to a pc with 160mb-ram - which is 32 + 128. now i own a faster one with one single 512mb-slot. but unfortunately, some problems occur: gta3 is collapsing all the time, i cannot copy a normal 1024x768 .tga-image to clipboard via corel (»low memory«) and after watching some freshly downloaded quake3-bots i got the message »low memory«, too. sometimes, even some multitasking surfing can bring me up to fully busy memory - is this a technical problem or am i asking for too much power!? i heard something like this memory-damage would lead to the problems i have.
speaking against it is a rather stable quake3 while in game and a fascinating stable 1nsane played also in 1280x1024 - without any stinky problem.
thanks and regards,
The memory module might be faulty or motherboard might not support 512M modules
I have been building computers for years and never found a reason for the placement of the memory slots on a motherboard. If you look at a board that uses an Intel CPU, the slots used are1-3 and/or 2-4. If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4. Does anybody know why this is? No, I'm not trying to make a better motherboard, I'm just curious enough to finally ask.
Thanks for any info anyone can give.
'If you look at a board that uses an AMD CPU however, the slots used are 1-2 and/or 3-4.'
refer to the MSI K9N - which see;
Dual channel with slots 1/3 or 2/4.
Assuming that you installed 2 Gb in 4 modules of dual channel ram and it is used from byte 0 to 2047 linearly, then assuming that the average 2 Gb ram install running XP uses about 50% of the Ram running avg8 (as example), you would get heating in ram modules 1 and 3 and none to speak of in 2 and 4.
Thus, heat separated components and better cooling.
Hi,my name is fajar from indonesiai want to add new memory to my laptop HP 1000-1b09auin CPU-Z, my laptop have 2 memory slot,but, i can't find other memory slot where is the other slot ? Thanks for help Best Regards,
Hi: If you look at the illustration in chapter 4, page 52 of the service manual, it appears that the memory slots are stacked on top of each other. http://h10032.www1.hp.com/ctg/Manual/c03762978http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/I-Can-t-Find-Other-Memory-Slot/td-p/5655384
it seems that the memory stick slot doesnt work anymore. in the device manager there is a yellow question mark and it says that it it not working. i would try installing the drivers but i kinda lost the recovery cd or what not. well before when i bought this, VAIO PCV-RX580, it was using Windows XP Home and now i use Professional. not sure if that makes a difference. im just wondering is there anyway i can get the memory stick slot to work again?
Try updating the drivers from here, search for your memory device.
Where is the memory card slot on the Pavilion 550-126? The slot on the front does not look like the right size. Is there a way to get a diagram of the front and rear functions?
Hi, Very interesting. The following link shows its specs: http://support.hp.com/ca-en/document/c04875975 It has 7-in-1 multimedia card readerFigure : View of memory card readerSupports the following cards:Secure Digital? (SD)Secure Digital High Capacity (SDHC)SDXCMemory StickMemory Stick SelectMemory Stick PROMemory Stick MagicGateWith Front I/O portsUSB 3.0: 2Headphone: 1Microphone: 1and Back I/O portsFigure : Odense back I/O panelUSB 2.0: 2LAN (Ethernet)HDMI: 2USB 3.0: 2Audio: Line inAudio: Line outAudio: MicrophoneI believe it is at the front but where. What is your card ? Is it on the list above ? Regards.http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/550-126-where-is-memory-card-slot/td-p/5690390
I have a dell dimension 9200 and the motherboard can handle a maximum of 4gb of ram, but is there a limit per slot?
In other words does it have to be 4 x 1gb sticks of ram or can I use 2 x 2gb sticks?
The reason I ask is that I've had lots of bsod and crashes recently and after performing lots of tests using memtest it seems that 2 of the ram slots on my motherboard are bad meaning I only have 2 good ones to use.
RAM Memory Upgrade: Dell, Mac, Apple, HP, Compaq. USB drives, flash cards, SSD at Crucial.com will provide that answer for you.
According to crucial
Each memory slot can hold DDR2 PC2-5300, DDR2 PC2-6400 with a maximum of 1GB per slot.
I have a Tecra Laptop running Windows XP Professional The latptop has two slots A amp B in which you can add MB of memory each When starting Problem Slot Memory up the PC with both modules installed I get the error message quot Windows could not start because the following file is missing or corrupt system drivers pci sys You can attempt to repair this file by starting windows setup using the original setup CD-ROM Select R at the first screen to repair quot I have done as indicated and done a full repair on Windows XP but still get same message I then went to Microsoft Memory Slot Problem com to search the knowledge base According to Microsoft the above message indicates quot This issue may occur if your computer contains a hardware component that is either damaged or is incompatible with Windows XP quot I followed their instructions and it turns out that if I put just MB in memory Slot A the Memory Slot Problem computer starts up fine If I add it in MB in slot B I get the above problem At first I Memory Slot Problem thought it was a bad memory module but if I switch them they will both start up the computer in Slot A when used by themselves So it appears to me that Slot B is the problem somehow Any thoughts or assistance greatly appreciated nbsp
I have an IBM T30 laptop which has 2 slots for memory. Which is the primary? I am adding a 512 mb memory module and I want to know which slot should contain the 512 and which
one the remaining 256. BTW, even though I have a 256 in each slot most of the time it only
recognizes a single 256 module. Thanks for your info.
My motherboard just went out on my pc and I was wondering if there is something that I can hook up to my laptop that will let me read whats on my pc memory, kind of a external memory slot or something. I've been searching google for a few hours and I can't find anything and I know you guys always know what your talking about and answer very quickly. Any help would be appreciated.
Your actual data is not stored in the memory, its stored on the hard drive. And it's very easy to connect a hard drive to any other PC, there are many adapters for this.
Here's a version that simply connects a drive, either SATA or PATA(IDE) to a USB port without any enclosure: http://www.newegg.com/Product/Product.aspx?Item=N82E16812232002
Here's a version that basically converts the drive into an external drive that you can safely use that way: http://www.newegg.com/Product/Product.aspx?Item=N82E16817388017
This one only supports SATA hard drive with a connector like this: http://www.google.ca/imgres?hl=en&s...dsp=35&ved=1t:429,r:0,s:28,i:160&tx=102&ty=76
More enclosures to choose from: http://www.newegg.com/Store/SubCategory.aspx?SubCategory=92&name=External-Enclosures
So recently my colleague tried to upgrade the RAM in his laptop, but he ended up messing up really bad he actually broke the only memory slot on the motherboard (yikes!). He asked me to take a look at it for him, and I was pretty surprised how badly he had messed it up (as in there's no way it could be fixed). I told him he might have to replace the entire motherboard, but he really can't afford that right now. I let him know that might be his only option, but I decided to ask here before giving up. The rest of the motherboard is fine; only the memory slot is broken. So is it possible to replace just the memory slot without replacing the entire motherboard? And if so, can anyone help me out with doing this? He does really need his laptop, so any help would be awesome.
How long can he go without a laptop?
That is a big project. You will need to be a master with a solder gun. Just getting the old part off without melting the motherboard will be an adventure. There are a LOT of pins.
First you will need to find the Brand and model # of the motherboard. You can use CPU-Z for that - it will list the info on the third tab.
Then, armed with that info you will search for the RAM SOCKET replacement. This is where it will get interesting, as the available sources will be in Asia. Shipping will kill you (for a $3 part). And you will probably need some translation skills too.
Your colleague really couldn't afford to mess his RAM Socket up. Now his best bet is to buy a new laptop.
I just purchased my computer yesterday. I removed my Sony Memory Stick PRO Duo from my digital camera and was going to download them to my computer. The slot came with a Dell piece. My memory stick is too small. It did not come with an adapter and I have no idea how to get it installed. Any ideas???
It is likely that the two aren't compatible.
What model Dell do you have? The type of adapter that you need depends on what slots your Dell has.
Also - most cameras come with a USB cable. Could you use that instead?
HEY GUYS GREETINGS i just joined earlier today im seriously in need of help my friend ask me to fix his pc i tried to replace the memory with mb ddr with his original memory mb and a mb of ram just then when replacing it and turning it on i heard a huge quot beep quot then i immediately shut the pc down then when i check it up i saw i slot, help Fried memory quot black spot quot on one Fried memory slot, help of the memory slot i figured it out its fried up luckily the mobo has two memory slot only one of the slot had been fried i replaced the two mb with the original ones the problems now is that the pc is kinda slow in starting up showing the bios and showing a quot blue error screen quot after and sometimes restarting over and over again i really need your help guys really really need it im counting on this site for any help you can give thanks raj philippines nbsp
You not only fried the memory slot, you have damaged the motherboard
This is a hardware question for anyone that can help me out. I have tried to upgrade the ram in a dell dimension 5150, after seating the additional ram one of the existing slots containing ram started smoking with an obvious plastic burning smell. I have removed all ram and the burning is still occurring when powering on accompanied by a loud beeping noise. It's clear that one of the slots is melting. Need to know what my options are now. New board, or can this be rectified. Obviously the slot is now damaged and can't be used but there are three remaining. Never experienced this and unsure what has caused it to happen ? Any help would be greatly appreciated.
Please place your system specs, that way we could help you easier.:
System Info - See Your System Specs
The beeping noise, is it a one long beep? Or is it accompanied by another long or short beep?
Can anyone tell me where the RAM expansion slot is on a MITAC 7521 laptop, I can't find it. DOH!
look at the manual or call the manufacturer.
I'm working on a windows vista computer that would restart randomly and get a window exception bsod. I took out a memory module and ran memtest86 with memory in slot 1. Failed. Swapped it out with another memory stick but on the SAME slot on the motherboard. Failed.
Took that stick, put it in another slot on mobo. Passed. Took the other stick put in in that next slot, got the restarts again. Could it be that the memory slot that went bad on the mobo also caused the memory stick to go down with it?
Yes, that could be possible.
i have a N1996 motherboard with two slots for 184pin memory. i have purchased a new module to slot into the second slot but i just get a long beep then the beep stops, then a long beep again etc.
i have just tried the original one in the second slot(on its own) twice, but still the beep. i have put the memory back into the first slot and it works fine.
any help would be grateful
would i need to change the bios setting, or do you think that the second memory bank is down.
Alrighty I m running an MSI K N Neo I ve had it for a while help. coded memory slot Color so far I ve just been running a stick in Color coded memory slot help. the first green slot Someone got me two sticks of to fill out my system I installed them but only recognized g of ram I checked the manufacturer s site to find http www msicomputer com product p spec asp model k n neo platinum a nice diagram about dual and single channel memory that makes no sense to me I believe all the sticks are dual channel they have memory modules on both sides of the ram if that is how you tell I m not sure All three sticks are kingston value ram they are pc all three work as I discovered after some musical chairs with memory I m currently running the two new sticks recognizing g of memory while I have my original stick in a box Can anyone help me out with the diagram or point me in the direction of something more helpful The manufacturer s website has an online tech support page that is under construction I just downloaded the manual but I was hoping for some easy insight Anything would be greatly appreciated at this point Thanks nbsp
Did you scroll down to the "DIMM Module Combination" and "MSI Reminds You..." and read what is posted there?
Can i upgrade my 4gb ram to 8gb? How many slot does hp 15 g005ax have?
Hi, It has: 1 customer-accessible/upgradable memory module slotSupports single-channel memoryDDR3L-1600-MHz Single Channel SupportDDR3L-1333-MHz Single Channel Support (DDR3-1600 downgrade to DDR3-1333)Supports up to 8 GB of system RAM in the following configurations:? 8192-MB total system memory (8192×1) or (4096×2)? 6144-MB total system memory (4096×1) + (2048×1)? 4096-MB total system memory (4096×1) or (2048×2)? 2048-MB total system memory (2048×1) Source: 3rd manual on the following link, page 2 http://support.hp.com/my-en/product/HP-15-Notebook-PC-series/6545564/model/7169754/manuals and the answers: (a) Yes (b) only one. Page 65 of the manual shows you part number and how to install RAM Regards.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/hp-15-g005ax-maximum-memory-and-slot/td-p/5818321
I removed my memory card before ejecting it. Now my memory card slot doesn't work at all. I have done it before and got help on fixing but I can't remember how I did it. It is a readable card and I have tried several different ones so it's not a issue with card itself. The computer doesn't even see I am putting it in. Please help I do a lot of photo's and it's annoying to have find the computer plug everytime I need to get the pictures off.http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Memory-card-slot-not-reading/td-p/5789311
How can I upgrade my laptop memory? There isn't a memory slot at the bottom of the laptop.
Memory slots on this notebook model are placed under the bottom cover so when RAM modules must be exchanged or upgraded bottom cover must be removed.
Please note: on some notebook models RAM upgrade is supported by notebook owners and RAM upgrade steps are described in user?s manuals document.
I your case such upgrade is not supported and RAM upgrade should be done by authorized service provider.
Generally speaking bottom cover removal is not complicated but you should not do it alone. This will cancel valid warranty.
In my opinion, before you do anything contact nearest Toshiba service provider in your country and ask for help. Simply pick up some info about price and compatible RAM modules.
My Compaq nx7400 has a pop-out tray on the left side, with 4 slots for memory cards - I think ?! I've tried loading an SD card into the tray & pushing the tray in - but without success..... Anyone know the correct way to use this weird plastic tray thingy ?? Thanks
Hi, I have a new G72-25OUS laptop, I'm wondering how to use the slot on the left side, that says SD-MS/Pro-MMC-XD? I assume its to put a SD card in from my camera to upload photos, do I just stick it in and if so, how do I get it out? I don't have a manual, didn't come with one and can't find info in the help section. Hope someone knows how to do this. Thanks.http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/How-do-I-use-the-memory-card-slot-on-my-laptop/td-p/49651
I have an old Dell Dimension XPX T600 PC. I want to upgrade the cpu. However its a Slot A. I'm told that I don't have to upgrade the entire slot, just the cpu. How do I do this?
Also, what is the max cpu my slot A pc will take.
Hi all I have some (AGP 300w GPU upgrade not? PSU) slot, or 8x fairly specific questions that are related to graphics cards upgrades with respect to PSUs so allow me to lay out the background of the system first and then get into my questions second First system details Intel P Northwood GPU upgrade or not? (AGP 8x slot, 300w PSU) GHz ASUS P SD-VX I believe that this is a Sony OEM board GB GPU upgrade or not? (AGP 8x slot, 300w PSU) PC DDR GPU upgrade or not? (AGP 8x slot, 300w PSU) SDRAM Corsair something or other x MB ATI Radeon Pro MB x RPM IDE harddrive x DVD-RW DVD RW drives floppy drive Sound Blaster PCI card mm case fan mm CPU fan stock fans Putting all this into the eXtreme Power Supply Calculator here gives me a recommended PSU wattage of W Even with the quot capacitor aging quot factor turned up to the system is years old I only get W Now my PSU is rated at W with A max on the single V rail It has NEVER---repeat NEVER---overheated been unstable crashed blue screened or done anything that I didn t want it to do Lucky me Here are my questions Is the current video card a quot balanced quot card for my system set-up Could I feasibly run a more robust card given the CPU RAM etc FSB is MHz Read---I want to run a more robust card and want to know if it s worth the effort However I m concerned about CPU and FSB bottlenecks Regardless of balanced components what is the most robust card my system can run Also Is my PSU enough to run a more robust card I ve gotten very wary of people hollering about more wattage because I ve never had any sort of power problem with the PRO in this system and I ve seen lots of discussion about how one should have at least a W PSU to run that card Then again I could be running a dangerously overloaded system and have not known it Please let me know I don t have budget constraints in that the only thing I m ready to change in the set-up is the video card I would love to hear suggestions on how to optimize the system but getting a new mobo PSU CPU isn t really an option at this point Only game I really play is WoW but I m quite attached to it and would like for it to look better than it does at this point Also given how tight the PSU component match-up is overclocking won t come into the picture at all That s it for questions right now Thanks in advance for reading Ruu nbsp
If all you play is WoW that system should be fine. And you even said it runs perfect for you. It doesn't look like you need an upgrade if you're just playing WoW...Unless you plan on playing new games.
It has been a while since I worked with a slot 1 CPU. I would like to upgrade a slot 1 Celeron with a 66 MHz FSB to a Pentium III slot 1 CPU with a 100 MHz FSB.
If the FSB remains at 66 MHz due to the MB, will the PIII CPU still work, but a a reduced speed?
Hi , im new around here and I just want to know that can i upgrade my graphic card if i only have standard PCI slot ?
hello and welcome; here are couple of options of PCI Video Cards for your system, if your system is bit older, it should still have AGP slot. Can you please give your system's specifications?
Here s a VERY strange problem Inspiron s w two G DDR DIMMs installed nbsp was up and running when it suddenly turned off with flashing amber SLOT Inspiron Failure? 660s Memory power light and two-beep code indicating memory problem Inspiron 660s Memory SLOT Failure? When power cycled the same symptom occurred flashing amber amp two-beeps Troubleshooting showed DIMM slot was bad Item on p Inspiron 660s Memory SLOT Failure? of User s Manual If either G DIMM card was installed in the DIMM slot Item on p the system would boot OK Both slots populated Flash beep DIMM slot populated with either G DIMM Flash beep DIMM slot populated with either G DIMM Boots OK After quot fixing quot the system by de-populating the DIMM slot full Dell Diagnostics online version were run with all PASS results Memtest passed as well QUESTIONS How could a memory SLOT not memory card suddenly fail in the middle of operation The system was up amp running but nothing was being done on it at the time of failure Did a part of the chipset fail Is there any way to fix this problem short of replacing the MoBo Thankshttp://en.community.dell.com/support-forums/desktop/f/3514/t/19977521
I have installed the new windows 10 in my PC, before this i had windows 7 home premium. i have a memory card adapter in which i used to slid my micro SD card and was able to access it when i had windows 7, but when i upgraded to windows 10 and inserted the memory card reader in the slot it stopped detecting, their is no action and i am not able to access it.
System: Dell Studio 1558 2010-11 Model.
Dell Studio 1558 has not been tested by Dell for Windows 10 operating system you will not find drivers for it. However, please use the card reader Windows 7 driver and install it in compatibility mode.
Please let me know if this works.
When I populate slot2 with 512mb noname ddr1 I cannot boot into windows, BIOS comes up ok and memory tests ok. This is intermittent but now almost 90% of the time it won't boot. slot1 contains a 1GB kingston pc3200.
With no ddr in slot2 it boots ok and with a 1GB stick (corsair) it boots ok. I guess it was the noname 512MB stick but seems strange it passed all the memory tests (from ubuntu grub loader)
MB is an Asus K8S-MX
hi what happens when you put the 512MB stick in slot 1 and the 1gb stick in slot 2? kinda surprised your running win7 64bit on just 1.5 gb of ram.http://www.sevenforums.com/hardware-devices/361167-wont-boot-into-windows-2nd-memory-slot-filled.html
I m sorry this is so long but please take the time to read it all because I have already taken a LOT of steps to solve this myself I am an IT Professional and have been Memory locks Stick up unless in is Vaio slot since the s The computer I m having the problem with is mine it has always had up-to-date AV and has Automatic Updates on I check it every so often with SpyBotS amp d or MalwareBytes and it has NEVER had anything besides tracking cookies It has been on a secured wireless network out in the middle of nowhere doubt anyone would hack it with both a hardware firewall at the DSL entry point and Windows Firewall on It has never had a Memory Stick in its slot before now The only removable media I ve ever used with it is a big USB disk for backups which unfortunately has not been done Vaio locks up unless Memory Stick is in slot in about months Vaio locks up unless Memory Stick is in slot I ve never had Limewire or any other risky stuff installed on this computer I don t use FaceBook or any of the social networking I don t surf any type of risky sites Vaio locks up unless Memory Stick is in slot and I don t download anything onto this computer Its the safest computer on the planet The computer is a Sony Vaio K-series laptop probably - years old running XP Home SP and IE Here s the sequence of events as best I recall them - everything is fine I m looking up something boring like outboard motor parts Its supposed to storm tomorrow so I am going to unplug it Automatic Updates are downloaded and ready to install so I choose quot Install Updates and Shutdown quot It does its thing in a normal amount of time no indication of problems and shuts down I unplug the charger and put it away - I get the computer out plug it up push the power button It gets to the WinXP logo with the progress bar underneath The bar rotates around a couple times then sticks I wait probably minutes and nothing ever happens I notice the orange light is on beside the quot Memory Stick quot slot I boot it up in Safe Mode That works I check the logs for the Windows Updates everything appears to have went fine Check Event Viewer for some clue as to what happened nothing Check Device Manager no splats Everything looks fine Hmmm maybe a fluke try a normal reboot again Exact same result hangs at same place with orange light on beside quot Memory Stick quot slot So I boot into Safe Mode and uninstall all of the Windows Updates that have the date on them I made sure I did them in the correct order so all dependencies were resolved Tried another normal boot Nope hangs at same place with orange light on beside quot Memory Stick quot slot OK now I m scared So I go to my other PC the desktop and do some Googling of the symptoms I find one in particular a malware-infested Sony VAIO locking up with Memory Stick light on So its probably malware Since I already have the latest version of Norton AV I run a full scan on the Vaio with that Comes up clean Then MalwareBytes latest version comes up clean Then I reboot into Safe mode with Networking Then run Housecall online with Trend Micro comes up clean Just for S s amp G s I even try their New Beta scan clean Then Kaspersky s online scanner also comes up clean Then BitDefender again clean Then as a last resort I disable NOrton s real-time protection and run Combofix Combofix did not find anything I looked through its logs but have to admit I m not that good at fixing something manually I don t know how to interpret Hijack This logs I always give up before then and reformat But I have a bunch of old software that I don t know the registration keys for so I do not want to reformat At this point I kinda panicked and tried Restoring Windows to a Restore Point on That hosed my IE Windows was unable to restore back to the Restore Point that Combofix had just created - So I dinked around with it reinstalling IE and Java Finally got that working again I had read in the post about the malware-laden Vaio that his booted normally if he pu... Read more
I am happy to report that I have solved the identical problem you describe involving system hang on the Windows XP splash screen and the yellow memory stick light turning on at that point. Similar to your experience I could boot in safe mode but no way to get into a normal boot. As this was a client machine on a limited budget I could not waste a lot of time and contacted the client and got authorization to do a full system restore figuring it would eliminate any software issues (conclusion based on ability to boot in safe mode it seemed reasonable?). Much to my surprise after a full factory restore from the OEM restore DVD the symptom was still there, in fact the restore could not complete because it required a full normal boot to finish the restore. So now I was really perplexed, no way it was software (given that the drive had been fully erased and reformatted), so that only leaves hardware and the memory stick module seemed the likely culprit and on a hunch I tore the bloody thing apart (keyboard, rear hinge cover, and all screws from bottom of the case) which allowed be just enough clearance to get inside and remove the ribbon cable from the memory stick module and presto the problem is resolved and unit now boots normally and I am in the process of bringing the system back up to current standards with all the updates, etc, and have already done multiple reboots with no problems. So I suspect you will find similar results once you go through the difficult task of tearing it apart as our symptoms were identical.
Trust me it has nothing to do with virus or malware activity, it is an actual hardware failure!!
Hi all I am having a strange problem with my PC I have a year old motherboard Leadtek Winfast K nCR D Pro and a new Athlon XP and new x GB corsair value memory - PC slot issue weird Resets sticks My PC is randomly resetting itself even sitting at the bios screen just as though the reset button had been pressed I disconnected all the drives and it still happens I have installed a new PSU and it still happens This is the bit that confuses me I PC Resets - weird memory slot issue have three dimm slots one black two blue for dual channel If I put either of the chips only in the black slot I get NO problems at all If I put either of the chips only in either of the blue slots it randomly resets this happens whether I have a single chip in one of the blue slots or both chips in both blue slots Obviously when there is only one chip in one blue slot the bios does not show dual channel enabled Is there any difference in the way a motherboard deals with the memory in the blue slots which could indicate a problem with the memory or is it likely the motherboard is dying Thanks for your help nbsp
Assuming the RAM is correct for your PC go into BIOS and set DRAM or RAM or whatever your RAM is listed under to Auto, reboot and see if that helps. ALso, make sure that you have the RAM in the correct slots for DDR (probably the two blue as you stated).
sorry i like to seek your adivce on the following matter
i am using asus P7H55-M motherboard..i was actually using kingston 2x 2GB 1333MHz ram..recently i added 1 nex kingston 1x4GB 1333MHz ram..it was working fine until today when the com could not boot up..when i check, i found burnt mark on the 4GB ram and the memory slot..
my question are:
1) could i replace my motherboard if it is still under warrenty
2) could the burnt mark cause by the mismatching of the ram..
1) could i replace my motherboard if it is still under warrentyClick to expand...
I guess so, have you ever tried to establish the communication with the motherboard maker yet? Many of them has it own support lines that can provides the RMA informations.
2) could the burnt mark cause by the mismatching of the ram..Click to expand...
How? Did you actually force it to be seated in backward position? Look closely at the notch of RAM, they can only go one way, and you can feel the pressure of installing the ram if it goes in wrong way.
I am using a HP Z400 Workstation Xeon Quad-Core W3565 3.2GHz, 12GB (3x4GB), 1TB, DVDRW, Windows 7 Pro.This the the model with 6 memory slots, so there was a possiblity for 24GB of RAM. When I populate the remaining slots 4, 5 & 6 with 4GB DIMM, I get errors on boot up for the newly populated slots. I am unable to configure for 24GB.I did discovered that the DDR3's that I am using are non-ECC. The system has been running fine with the (3x4GB) setup. Is the non-ECC preventing the 24GB configuration from working?Thanks for any help you can offer.
Yes it is. It is not possible to install standard PC and server memory, I've never seen a system of any brand which supports such a configuration. Officially, the Z400 supports only ECC unbuffered memory modules.However, it will also run with standard DDR3 RAMs, unsupported only means that HP Customer Service won't help you.There are some reports that even 8 GB Modules work, but that's another story, 24 GB runs fine. Mixing different types of memory is generally a bad idea.Use either ECC unbuffered (which is recommended) or non-ECC, preferably six identical modules.DDR3 are relatively cheap, even those with error checking and correction. Good luckhttp://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/z400-6-slot-memory-configut-ration/td-p/5571112
I just recently purchased a 1gb stick of Kingston ddr400 Ram for my pc.
Currently i have 2 x 512mb sticks in my 1st and 3rd slot of my MB. I currently use the Asus A7N8X-D Board. 3 Memory slots total. What would you suggest me to do for the order of my memory or does it even matter ?
Slot 1 : 512mb
Slot 2 : Empty
Slot 3 : 512mb
Eventually going to be 3gb Memory but Im not the best in these types of configurations.
Thanks ahead of time guys.
Hi nbsp I recently bought a notebook from HP the HP G with A - processor Inside there was a GB DDR L- Kingston memory module slot with HP u... speed G2 - 355 only Memory on 1600MHz K7H44ES shipped and there are two slots available nbsp I checked with CPU-Z and other tools and it showed a DRAM Frequency of MHz nbsp I added a GB DDR HP 355 G2 K7H44ES - Memory speed 1600MHz only with on slot u... L- Cruical memory module to the second slot and checked again with CPU-Z The DRAM Frequency was just MHz the memory size of GB was recognized correctly nbsp I thought it must be because of two different modules got for testing two other identical GB DDR L- Kingston memory modules and DRAM Frequency was again just MHz nbsp And if only one slot is used with any DDR L- I had available DRAM Frequency was MHz But whenever both slots are used it dropped to MHz nbsp What's wrong Do I need some specific memory modules for this notebook respectively CPU and memory controller nbsp HP Support suggested just that but I believe it's not because of this Perhaps the memory controller is working that way that it drops down to MHz if both slots are used But why should that be With none of my previous notebooks or pc this happened always the memory speed as specified nbsp And Google says that A - has a single-channel memory contoller for DDR L- which would be even faster but instead it runs with nbsp I currently use Windows Pro -bit if this of matter nbsp Cheershttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-355-G2-K7H44ES-Memory-speed-1600MHz-only-with-on-slot/td-p/5801100
My printer's memory card slot isn't recognized by my computer. I am running Vista. Can anyone help with this. I contacted the printer's tech support and they tried but said it was a Microsoft problem.
Sounds like a tech support answer. What is the Brand and Model of the printer?
In Device Manager under your Printer is there a notification sign?
Hello quick question, I am trying to upgrade my old tiny from a pentium 2 400 mhz slot, to a 1.3 G celeron using a 370 socket to slot converter, but when i power up the screen does not come on, Will it even work if so what am i doing wrong. P.s. I have changed the bus switching to 4x on the motherboard.
My experience has been that it never works. Ive tried to use one of thos converter boards on a number of occasions and its never worked.
THE ISSUE Hardware issue A broken memory stick slot on the HP Pavilion n DETAILED EXPLANATION I don t know how this happened anyway but the catch on the second slot tray is broken causing one side of the installed memory stick to hang loose and not snap in or fit securely resulting in Windows not registering or recognizing that there is in fact a RAM memory stick actually in the second slot CONSEQUENCE I now have only one good RAM memory slot ACTIONS TAKEN SO FAR Purchased and installed nd RAM memory stick in the problem slot PRODUCT SPECS Memory Type DDR PC slot Pavilion broken A stick the on 753n HP memory DDR PC DDR non-ECC RESULTS Problem still exists Crucial s online scanner and the System Specs under My Computer still reads like below Memory DDR PC DDR PC Memory Type DDR PC DDR PC DDR non-ECC Maximum Memory GB Currently Installed Memory MB Total Memory Slots Available Memory Slots MB EMPTY SUGGESTED ACIONS FROM TECH SITES A Replace the mother board OR B Replace the MB stick that s in the good slot with A broken memory stick slot on the HP Pavilion 753n a GB stick THE PROBLEM A broken memory stick slot on the HP Pavilion 753n WITH B According to Crucial s com s Expert Online Tech where I bought the extra RAM this pc HP Pavilion n is too old and cannot handle a GB stick because it s basically an obsolete pc the OS operating system will be severely affected causing crashes and other instabiity if you put a GB stick of RAM in a slot therefore it is not recommended to put a GB stick in a slot MY QUESTIONS Is he right I ve received both yes and no responses so far but no definitive answer What other solutions are there What s involved in remanufacturing or replacing the board Should I contact HP to get a price quote to fix the issue THANK YOU All suggestions reviewed nbsp
is the system memory slot basically provided for au003tx is samsung 's 2133 mhz or not? i actually brought this laptop one month ago and am shocked to see the specification tht the memory slot belongs to samsung i can't get to know about that i tried very hardly till now please answer me so that i can do something if i'd been cheatedplease do reply
@sree_parimi? The slot may have a Samsung memory stick in it but you could install any name brand in it. DDR4-2133 Dual Channel Support (DDR4-2400 bridge to DDR4?2133) Your manual here. http://h10032.www1.hp.com/ctg/Manual/c05228250 REOhttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/is-the-system-memory-slot-basically-provided-for-au003tx-is/td-p/5743677
I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016). Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards. All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer. I currently have all the latest Windows 10 software drives installed. Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
Go to Solution.
I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved. The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it. Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you. But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
I have a Toshiba A S running Windows Vista Home Basic the max memory upgrade is X GB which I purchased via no card 2nd memory recongnition Toshiba A135 slot, newegg com and installed When I turned it on black screen and no boot up Basically it will only reconize one GB of memory doesn t Toshiba A135 2nd card slot, no memory recongnition matter what slot as long as it is only one I tested both memory chips both work in the computer and in either card slot just not both chips in both card slots What Toshiba A135 2nd card slot, no memory recongnition the heck Even stumped the Geek Squad guy at Best Buy he seemed to think it the mother board issue It runs much better on the GB then it did with the MB cha Computer Toshiba A135 2nd card slot, no memory recongnition should be able to run both GB card in each slot and reconize about to of the memory if it would run both cards at the same time I did upgrade the BIOS from to as most of the blogs suggested-still won t recognize the nd GB card nbsp
cant find your lappy on toshiba site , same thing happened with me and was the bios update i needed so re check its the correct update
have you tried 1x2gb and 1x what you took out??
I purchased what was described as a 'Dell 3588D Motherboard Slot 1 Dimension
XPS-B' motherboard from eBay. It uses Rambus memory sticks, but has 3
memory slots to fill, while every motherboard of that type I have researched only
has 2 memory slots. In addition, most of the Series B desktops I looked into
seem to be limited to 512MB of memory.
Because my motherboard has 3 memory slots, would I be allowed to insert three 256MB memory sticks, giving me a total memory of 768MB? I'm told that you should
not exceed the required limit of memory. Would someone care to comment on my
Just try it, it'll either work or it won't work.
(NEWBIE/FIRST POST)I just purchased a brand new Lenovo 110-151BR (Model 80TT) Computer from the Best Buy retailer yesterday (October 4 2016). Everything works fine so far except the computer Memory Card Slot (SD/SDHC/SDXC/MMC) does not recognize any of my personal SD/SDHC Cards. All the SD/SDHC cards are valid and working due to the fact that my two older computers recognize the same identical SD/SDHC cards with no problem that I am using on the Lenovo 110-151BR (Model 80TT) Computer. I currently have all the latest Windows 10 software drives installed. Is there a driver I can download off the internet or from the Lenovo support area before I return this brand new computer back to Best Buy?
I FINNALLY figured it out; here is the fix:As of October 5 2016 - Problem Resolved. The Lenovo 110-151BR (Model 80TT) Computer is set-up and configured differently than most computers on the market by other manufactures. When you insert the Memory Card (SD/SDHC/SDXC/MMC) into the Lenovo 110-151BR (Model 80TT) Computer socket ? you must insert it ?upside-down? in order for the Lenovo 110-151BR (Model 80TT) Computer to properly read it. Most other computers by other manufactures ? you always insert the Memory Card (SD/SDHC/SDXC/MMC) right-side up with the Memory Card (SD/SDHC/SDXC/MMC) top text/main-side facing you. But Lenovo wanted to be a little different I guess. Well anyway ? everything is working fine (no additional drivers needed) ?. again just simply flip the Memory Card (SD/SDHC/SDXC/MMC) over/upside-down and insert. (END)https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Memory-Card-Slot-Not-Functioning-Brand-New-Computer/td-p/3447370
ok memory reader card is duo slot? need it help even pro in i laptop possible? stick SD i was bored and got some homebrew for my ds but i needed some files off my psp memory stick and couldnt be bothered to charge memory stick pro duo in laptop SD card reader slot? it is even possible? i need help it as its dead and i cant find the charger so i thauhgt quot ill try it in my laptop sd card slot reader quot and after a some moments later bang autorun pops up with the memory stick icon on it all the files are accessable aswell now my question is HOW DID THIS WORK i looked in the slot and the pins are much to big spaces to fit all the pins on the card everyone know theres a size difference between sd and memorystick how did it work i didnt think there were duel sd and memory stick readers all the usb ones if seen have seperate slots this is memory stick pro duo in laptop SD card reader slot? it is even possible? i need help bugging me as it shouldnt that and i have to get it in just the right place to get it to work it doesnt seem to fit snug in the slot any idea on how the hell this is working thanks nbsp memory stick pro duo in laptop SD card reader slot? it is even possible? i need help
My DVD drive is broken beyond repair, and I've forgotten my USB at home.
I have the installation saved on my desktop, but it won't let me downgrade unless its a reboot. Does anyone have a good multiboot program that will let me install XP on my computer?
Can I ask why you're posting in a Vista forum even though the problem is germain to any operating system?
You can multiboot in Vista and Win 7 as long as you install XP on a separate partition. Have you considered installing XP in Virtual XP which is available for Win 7 ultimate. Then you wouldn't need your drive.
Hello I have this odd problem in my Dell Latitude D core duo where one of work D520 memory slot Dell doesn't Latitude the memory slots isn t working anymore Just yesterday the Laptop would not startup but lights on the front panel came on Dell Latitude D520 memory slot doesn't work so I suspected a memory issue The D has a slot underneath the keyboard for memory as well as underneath the laptop When ever I put memory in the slot under the keyboard it won t startup I tried various memory known to work I even took the memory from underneath the laptop and placed it under the keyboard because it worked underneath But once I placed the memory in the slots under the keyboard it would not startup I would just get three green lights next to the power key Dell Latitude D520 memory slot doesn't work One stayed the other blinked they all eventually stopped entirely Once I removed the memory it would start up I Dell Latitude D520 memory slot doesn't work tried cleaning the memory slot with an air can I ve never encountered this before For now I just run with gig memory stick underneath the laptop It works fine I am assuming a motherboard issue Any suggestion greatly appreciated nbsp
Sure sounds like the socket is bad, or the memory controller. You may have to live with a single DIMM in the bottom slot.
I was wondering as I've got spare slot Mini PCI-Express free on my laptop if such Intel Card ITM could fit inside This technology is quite not expensive actually The mini PCI-E Memory slot on Intel? PCI-Express Mini Turbo Card is very ease to access under Intel? Turbo Memory Card on Mini PCI-Express slot my keyboard and it just have to be inserted and at system reboot Intel? Turbo Memory Card on Mini PCI-Express slot Windows will recognize straight that card and the proper Intel Turbo drivers It does act like quot Windows ReadyBoost quot amp quot Windows ReadyDrive quot under and Vista so the system will load faster boost the disk cache load faster Apps amp perform battery improvement Work on quot Mobile Intel Express Chipset familly quot amp quot Mobile Intel Express Chip Familly quot - gb RD RB no software pinning - gb RD RB no software pinning - gb RD no RB software pinning Any experience in return or it is just like inserting a SD Card in the Card Reader to Ready Boost See also this Post http www sevenforums com general-d robson-pe html EDIT Looks some of you threads seems telling not bothering about gimmick stuff for geek guy That's just annoy me having spare mini Pci-e slot as i won't install an expensive G card I don't need it either
Quote: Originally Posted by NoN
I was wondering as I've got 2 spare slot Mini PCI-Express free on my laptop, if such Intel Card (ITM) could fit inside...This technology is quite not expensive actually.
The mini PCI-E is very ease to access under my keyboard and it just have to be inserted, and at system reboot, Windows7 will recognize straight that card and the proper Intel Turbo drivers.
It does act like "Windows ReadyBoost" & "Windows ReadyDrive" under 7 and Vista...so the system will load faster....boost the disk cache, load faster Apps & perform battery improvement.
Work on "Mobile Intel 965 Express Chipset familly" & "Mobile Intel 4 Express Chip Familly".
-1 gb (RD, RB, no software pinning),
-2gb (RD, RB, no software pinning),
-4gb (RD, no RB, software pinning).
Any experience in return? or it is just like inserting a SD Card in the Card Reader to Ready Boost?
See also this Post:
Looks some of you (threads) seems telling not bothering about...gimmick stuff for geek guy!?!
That's just annoy me having spare mini Pci-e slot, as i won't install an expensive 3G card (I don't need it either!)
With 4 gigs of ram any sort of boost program isnt going to help much since it wont often be used.
I put a stick in...(256) and macine only counts it as 128...what gives. I was told PC133...would work in PC100 boards. Was I lied to?
So in February I ordered my kid an inspiron as first computer Later slot, card 11- per supposed have memory tag it it doesnt service is to inspiron but I decided to upgrade inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt the memory and I called Dell and provided my service Tag Dell told me it had a GB memory card and I could upgrade to a GB card I ordered the card and disassembled my computer to find there is no slot to upgrade After an hour on the phone inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt I find out inspiron 11- per service tag it is supposed to have memory card slot, but it doesnt that what I am looking at is one with a fixed memory module I told them that per my service tag it is supposed to have a slot and be upgradeable They told me there is nothing they can do So I say how bout you exchange this for one that has what I ordered They say since its over the days there is no way to return or exchange I said even though its your fault Am I being unreasonable All I want is what I ordered After a few more calls to India One person finally tells me there is a first and second generation of this laptop Ist gen has the fixed and the second has the replaceable So I tell them that per nbsp Dell tag nbsp this is supposed to be nd generation and therefor it was built wrong They again say quot we have a day no Hassel return quot and your over that Any suggestions folks I m sick of beating my head against the wall with these peoplehttp://en.community.dell.com/support-forums/laptop/f/3518/t/19992563
I recently upgraded my processor amp motherboard from AMD Phenom II X Asus M N T-M Now it s AMD FX- amp Asus M A L-M LX I ran two modules of RAM GB GB on that previous motherboard These are my modules Corsair CMZ GX M A C Vengeance GB Single Module DDR Memory Kingston Value RAM GB don t know the exact model but it was a Mhz always 2nd DIMM Solved: on Memory slot on is hardware new reserved motherboard module Both modules have the same latency I just had to downclock the corsair module to Mhz amp then they both ran in dual channel mode Now on this new motherboard when I check sys info in BIOS it shows just GB RAM or GB basically it Solved: Memory on 2nd DIMM slot is always hardware reserved on new motherboard just detects what s in the first slot When Solved: Memory on 2nd DIMM slot is always hardware reserved on new motherboard I boot into Windows it says that GB or GB the other slot is always hardware reserved Also task manager shows wrong RAM speed Instead of Mhz it shows Mhz And when I really run it at Mhz or even below Mhz it s always wrong in task manager There s another interesting thing happening when I try to change the memory speed in BIOS When I change it amp as soon as I hit enter after F system just powers down for a few seconds amp boots right up This is just my second motherboard amp idk if it s normal but it sure doesn t feel right I m posting this after going through a lot of posts on similar topics amp the solutions are not working for me I even checked for bent pins on my CPU but it looks good As it looks either the RAM modules are incompatible on this motherboard but then why is the speed in task manager always wrong or something is wrong with the motherboard This is what I think but I need your help to make it work I m mentally exhausted now nbsp
Hello my Optiplex just arrived this week nbsp I bought a Kingston mb SATA ssd in slot Tower upgrade.... 7040 Optiplex Mini M.2 a stick so I m trying to see if I can use this for my main boot drive Windows and then move the gb Sata drive over to a storage drive When I install the mb stick into the M slot and load the bios nbsp nbsp It shows up under General System Information PCI information Slot M amp also under Device Information SATA- nbsp nbsp When I look under System Configuration Drives it also shows up under SATA- here as well nbsp However it s showing up as a gb Drive under type So when I boot from a USB drive to try and reinstall Windows on this M stick it Optiplex 7040 Mini Tower M.2 slot upgrade.... s not showing up at all When I connect the M SATA drive and load Windows on the existing SATA drive that came with the the M Optiplex 7040 Mini Tower M.2 slot upgrade.... stick shows up in device manager under the hard drives nbsp The serial there corresponds to a Toshiba-form hdd unfortunately I can t do anything with it in Windows SATA operation is set to AHCI and I am booting into legacy with the USB Any thoughts nbsp I m wondering if maybe I have a dead memory stick nbsp There s no real way I can test it on another computer to see what happens
For Windows 10 you should have a UEFI Boot with SecureBoot Enabled. The USB should be made using the GPT partition scheme for UEFI BIOS. I hope you mean 120 GB and not 120 MB....
See here for details:
Hello Lenovo Forums, I am trying to install Windows 10 on my SM951 256GB m.2 ssd. Unfortunately, while it is recognized as a drive in windows, and in the bios, it is not considered a bootable device. When installing windows, it goes directly on the current c://. What am I doing wrong? Much Consideration, Xenda
Go to Solution.
Upon some inspection through some forums, I have gotten it recognized in the boot menu. Windows still insists on installing to the hhd, though.https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Lenovo-y700-15ISK-ssd-upgrade-m-2-slot-WIN-10-install/td-p/2264235
Here are the specs on my parents old computer:
eMonster | 600, 550, 500 and 500a
Napoli-2 Micro ATX (STX V1.2 form factor) motherboard, TriGem, Korea Single Edge Contact Cartridge design with Slot 1 connector Intel 443 ZX core and ITE8673F Super I/O controller
Add-on AGP 3D graphics accelerator slot Crystal CS4281/CS4280 built-in Sound Blaster Pro, MPC-3, MPU-401 compatible Audio Enhanced Stereo full duplex operation
I bought Zoo Tycoon 2 for the kids to use on their computer, and the processor need to be upgraded to at least 733mHz. I ordered a Slot 1 866 MHz Pentium processor through eBay and just tried it out in the computer, but my computer does not boot-nothing on the screen-no beep (to my recollection). The 600mHz processor had a fan and the 866mHz did not come with a fan.
Do I need a special processor for this motherboard? Or do I have a defective processor? And do I need to order a fan for whichever processor I reorder?
I have just bought some new memory, 2 x 1 gig, inserted it and ran the test. I get one error in the Stride38 test. Address expected is different to the one returned.
I know which chip it is, should I send it back, or is this 1 error acceptable for the system?
Thanks for your response
please read the sticky about upgrading memory.
I have a home built ASUS A7N8X2 Deluxe MoBo with an AMD Athlon XP 2800+ CPU. I upgraded Win XP Pro to VISTA Ultimate with no problems other than upgrading a few drivers. It went smoothly. At the time I had 1 GB in one of 3 available slots. I attempted to add 2 GB more to occupy all 3 slots. This produced a reboot after POST as VISTA started. I rotated the the modules through all slots and finally realized that when I went beyond 2 GB it produced a reboot. During post it tests 3 GB and the BIOS displays 3 GB. I have 512MB of RAM on the video card. Any suggestions ?? I am running the latest BIOS and if I remove one GB the machine boots and runs great... ???? Ron
I have a AMD Dual slot video card on my Asus M A X-Evo Motherboard It is installed in the first x slot and I also have a PCI-e x XF-I Titanium Sound card The problem I am having is that one of the x slots is covered by the video card and the nd one is open but right smack below the Video card My Video card is the Sapphire slot Question PCI-e dual below slot card video about GHz Edition non OC Attached is a picture of what I am trying to explain My other question is Will this cause issues since one of the GPU fans is semi covered Its it recommended Last question If I move this to one of the x slots below on my motherboard will it cause my x PCI-E slot to slow down Thanks ahead of time for any help you can provide Computer Specs - Asus M A x-Evo Motherboard AM AMD FX Core Ghz Sapphire AMD Radeon GHz Edition GB GB DDR Kingston HyperX memory x GB GB WD Black Edtion SATA HD TB WD Black Edtion SATA HD Sound Blaster XF-I Titanium PCI-E x Sound Card Thremaltake Bronze PS Smart Series DVDRW SATA DVD-ROM SATA nbsp
My opinion ...
Yes, setting up like that will have an impact. The air flow to your GPU will be restricted so it will more than likely run hotter than it did. It may still stay withing recommended specs, but it will run hotter.
The motherboard has onboard sound (Realtek® ALC892 8-Channel High Definition Audio CODEC ), any particular reason why you don't use that? Onboard sound is perfectly good for gaming and the like now, its not like older machines where you needed a dedicated card for decent quality. In my opinion, you only need a dedicated card if you are doing a lot of detailed audio work (mixing, remastering and other specific audio work). This would totally remove the issue.
I want to upgrade the memory of one of the pc's in our house. I get low memory alerts often and I can't delete much else to create room. I have never opened up a pc before, and I don't want to screw up and make things worse. The pc in question is a HP Pavilion a1150Y with a Intel Pentium 4 (3.00 GHz). OS is Windows XP SP2. It came with 512MB RAM and I would like to go up 2GB. I went to www.crucial.com, ran the system scan, and it says that this type of memory can go into that pc: "DDRII memory with support for DDR2 PC2-4200,DDR2 PC2-5300,DDR2 PC2-6400,DDR2 PC2-8500 speeds." I don't know what speed I should be installing. Any help would be greatly appreciated.
Hello together !
For your information:
Did a memory upgrade today at 2 Toshiba Satellite Pro 2100 (1,9 GH, 256 MB DDR-RAM originally), both up to 1 GB, all fine and not problems.
Just wanted to end rumours about "only 512 MB all together" or even less.
If searching for it, remember to think of the specifications:
concerning RAM frequency, building form etc.
P.S.: Don`t think a discussion is necessary, thread could therefore be closed...
According the notebook specification Satellite Pro has two memory slots and can be upgraded up to 1 GB. It is very useful to have your confirmation about RAM upgrade for this old but still good notebook model.
Have a nice day.
Okay I did something really stupid It was late I was Memory on laptop A215-S7416 MicroSD the Express stuck Satellite slot Card Card my in in the dark and I wasn t paying attention obviously so here s what happened I had a SanDisk GB Micro SD Memory Card that I was using in my cell phone I wanted to transfer some pics amp photos from my computer to the phone so I decided to stick it in the Express Card slot of my laptop Simple enough right Well being the incredibly smart person that I am I put the micro memory card in the adapter but it was the wrong one So my computer pretty much swallowed it whole I can t MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop get it back out Now I can t use the Express Card slot in my computer AT ALL because the old one MicroSD Memory Card stuck in the Express Card slot on my Satellite A215-S7416 laptop is still stuck in there You can t really see it but if you try to put another adapter in there it won t quot click quot It won t go all the way because the old one I lost is still in there waiting to be rescued haha So my question is How do I get the memory card out of my computer I tried taking it apart but I couldn t get the part of where the express card slot is so that was no good There s a way to do this I know I m just not smart enough to figure it out on my own Which is probably a good thing because I might mess it up again lol I have a Toshiba Satellite A -S laptop Any help is appreciated Thanks -Ashley nbsp
ok the lady I got this comp from says the comp the video card its reading now is not as good as the one in the PCI slot so Im wondering how do I make it so it reads the PCI slot
The AGP vid card though comes out with a Adaptor to make it so you can plug in moniters
Anyway Should I leave my moniter plug in the AGP slot video card or put it where no video card is but goes right into the computer
and no there is no plug that goes into the PCI slot
I hope this is understanable
Anyway Should I leave my moniter plug in the AGP slot video card or put it where no video card is but goes right into the computer
Click to expand...
That's known as integrated graphics, now do you have a PCI video card and an APG video card or an Integrated video card and an AGP card?
Also what are they Radeon xxxx? or Nvidia xxxx? we need to know the model numbers to tell you which is the better on to use.
i need to know which know which graphic card will fit for my computer. Ie i want to know which type: DDR ,DDR1 or ddr2 i bought my computer in 2007, but thats not enough to tell.
so please let me know how do i know which pci slot i have?
The type of memory doesn't matter, its the type of interface the computer supports among a few other things to watch for.
You likely have a PCI-Express slot, as long as it a x16 slot it doesn't really matter if its a version 1.1 or 2.0 slot.
Is this for your Dell or another computer? Whats you budget and what needs do you have for the video card?
This is the strangest thing I've seen in the past years of using computers I have an Acer Aspire - laptop that came with windows but I'm very picky and I wanted Windows xp back so I went onto Acer's website and won't mouse USB slot USB first other in works any slot, in only work but USB downloaded all of the windows xp drivers and then formatted the laptop to Windows XP with intergrated Service Pack The computer works just fine except for one very strange oddity - the USB mouse I'm using only works when plugged into the first USB slot it will refuse to work in the other USB slots I'm using a Microsoft Intellimouse Explorer USB which is my favorite mouse and I USB mouse only works in first USB slot, but won't work in any other USB slot have of them at home When I was formatting the laptop USB mouse only works in first USB slot, but won't work in any other USB slot I had the mouse plugged into the first USB slot and now that is the ONLY slot it will work in If I plug it into the other usb slots the red laser will come on which means it's getting power but it will not move the cursor and clicking either of the mouse buttons won't do anything When I have the Device Manager open and I plug the Microsoft Intellimouse Explorer mouse into the first USB slot the 'Microsoft Intellimouse Explorer ' entry will appear in BOTH the 'Human Interface Devices' tab and also the 'Mice and other pointing devices' tab However when plugging the mouse into the other usb slots the 'Microsoft Intellimouse Explorer ' entry will only appear in the 'Human Interface Devices' but NOT the 'Mice and other pointing devices' tab I could just go about my business using the first usb slot for the mouse but this little strange problem is pissing me off hugely as I might want to switch the mouse to another USB slot based on how I have the laptop positioned on a desk or other surface I should also note that the 'Human Interface Devices' tab has a 'HID compliant device' entry in it that isn't present on my desktop computer and my mouse works on any of the usb slots on my desktop computer I wonder if this is the problem I tried disabling this entry but it doesn't help any A final point to note is that I have many other usb devices such as flash memory sticks camera card readers external harddrives gps devices and they all work perfectly fine no matter which usb slot they are plugged into Very strange indeed Is there anyway to make my mouse work in any of the other USB slots
I have seen a similar problem, but it was all USB ports that weren't working.
First, check the BIOS to make sure all USB ports are enabled, which they probably are.
Are all drivers installed and up to date? Do any yellow question marks or exclamation points show up in Device Manager?
i have had trouble with my computer after cleaning it (can of compressed air) it would boot to log in screen then go black on the monitor or it would blue screen and restart.
after figuring out it was a RAM problem i tried another stick of RAM but same problem so i guess its the actual slot it goes into, i only have 2 on my motherboard lucky one of them is working still.
has anyone had this problem or know of a way to fix it, i am wondering if some of the canned air/gas became a liquid from spraying to close and got in it.
any help would be appreciated thanks.
ok so i have been looking into my problem more, when booting i press tab to show the POST?? or somthing and it says that 1 of the RAMs wouldnt/couldnt R/W (read write?? i dont know)
then i get the screen saying that windows has had hardware changes and asking to how i want to start windows (normal, safe mode, etc) i have tried all but it just restarts.
now its only with 1 of the 2 dimm slots this happens and i have tried differend RAM in there but only the 1 slot works
any help would be appreciated
I have a Qosmio G30-201, with the following spec:
- Intel? Centrino? Duo Mobile Technology featuring Intel? Core?2 Duo Processor T7400- Genuine Windows? XP Media Center Edition- 400 (200 + 200) GB Hard Disk Drive- 2,048 (1,024+1,024) MB DDR2 RAM (533 MHz)- 17" Toshiba TruBrite? WUXGA TFT display- HD DVD-ROM drive
Running under Vista Ultimate
I would like to upgrade the memory to 4096.
Do I have to buy 4096 of memory, or can I add 2048?
What memory do i buy? Toshiba do not seem to sell MB DDR2 RAM (533 MHz) after 4 years. What other memory would be suitable?
Your notebook can handle with 4GB of RAM and I recommend you to use 2 x 2GB module.
Compatible 2 GB module has part number PA3513U-1M2G or Kingston KTT667D2/2G.
Put the part umber in Google and you will find a place where you can order it in your country.
just received my new stream 11. have barely unpacked it yet! quesition: I know that there's a slot for a memory card - I almost never use a camera, so I'm not totally familiar with that technology. Can anyone tell me what kind of card goes with that slot? What's the maximum capacity? thanks! w
Yes, that will work. -weshttp://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/which-card-should-I-buy-for-the-memory-card-slot-on-HP/td-p/4834450
yah just a question, and if so give me a price range please for a pci
You can't add a slot to a motherboard.
How old is this computer that it doesn't have a PCI slot? Those have been around for quite a while. Are you sure it doesn't have one? Even AGP is not new technology.
EDIT: After seeing your other thread, are you asking if you can purchase an AGP or PCI video card? That's a totally different question, and the answer would be yes depending on which slot your motherboard has. How much it costs depends on what you plan to use the computer for. A simple one is cheap, and high-end gaming cards can get expensive.
I am Using Dell Inspiron N5010. Can I Use Only Single Module 8GB RAM in Single Slot (With One Empty Slot)http://en.community.dell.com/support-forums/laptop/f/3518/t/19983715
I recently upgraded my Windows 7 laptop from 4GB of physical memory to 8 GB. The Bios immediately recognized the added memory but it appears the Task Manager physical memory has not changed and only recognizes ~3.5 GB of available memory. Is there a way
to have Task Manager recognize the added memory? Is the fact that the Task Manager does not recognize the added memory mean other functions are not recognizing the added memory?
hi Guys.I want to upgrade my ram from 8gb to 16 gb.I have a HP ENVY 15-k008ne Notebook PC (J8E89EA) , after checking my memory info i found this:8 GB 1600 MHz DDR3L SDRAM (1 x 8 GB).my question is my laptop is 1 slot or 2 slot? can i get another 8gb or i need to remove the old one and get a 16gb?thank you.
Here is the Service Manual: Your Manual Two SODIMM slots DDR3L-1600 MHz Dual Channel Support Supports up to 16 GB of system RAM in the following configurations: So yes you can install a 2nd 8 gig module to have a total of 16 gigs. Memory module (PC3L, 12800, 1600-MHz, shared): 8 GB 693374-005 https://www.amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/dp/B00CQ35HBQ/ref=sr_1_1?ie=U... See p. 72 of the Manual for "how-to". Sorry to say it is a very hard job and takes removal of the motherboard. And it is not supposed to be done by anyone other than an authorized HP technician. If you are out of warranty this is much less of an issue but be careful in there, please. If this is "the Answer" please click "Accept as Solution" to help others find it.http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Memory-Ram-upgrade/td-p/5775289
my specs are as seen here http://dez666.ath.cx/cpuz.htm
My (crummy) ram is running at 200mhz, but from whats on there i can get 800mhz. however, i remember seeing somewhere my comp would only be able to use 400mhz..how can i find out xD
Hi I upgraded my memory to 8Gb ( with a crucial kit), this was couple of years back and everything was fine but recently I have had slow start up and slow loading of websites. I did a memory check from within the PC itself and I have a popup that tells me that there is a memory problem. So I reverted to the original 4Gb and things are seemingly just the same, same popup and slow loading. Could there be a problem elsewhere and how do I get rid of the popup box?? Thanks.http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Memory-upgrade/td-p/5711062
Looking for some butt-kickin memory for my Asus A8N-E, I am running Windows Vista with 1 gig of CORSAIR XMS 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 400 (PC 3200) Dual Channel and wanna bump it up to 2 gigs.
Perhaps I should upgrade my MSI NX7600GT-VT2D256E GeForce 7600GT 256MB GDDR3 PCI Express x16 Video Card? Cant seem to get the performance I had when I was running Win XP, I have to run Halo 2 on the lowest settings.
Thats beacuse Vista sucks and is a RAM hog. Go back to XP its more stable. Just have Vista on a slave. you'll never get the results you want with Vista
3000 N100 0768 Memory Specifications
512 MB (removable)
PC2-5300 DDR2 SDRAM SODIMMs
1.66GHz Intel Core Duo Processor T2300
533/667MHz FSB, Mobile Intel 945GM/945PM Express Chipset
(above info. from some online store . my LENOVO-laptop is exactly as above)
can any one tell me does this mean i can only put total 2gb mem ? 1gb in each slot? ( i have two slots)
also i bought 2gb. ram from small cut back computer store and they installed it works but after a while it keep showing me an error ( blue screen etc. ) i tried in diffrent bank - 2gb in one slot and 512mb in other still the same error.
but soon as i switch back to original 512 mb in each slot no problem .
what can be wrong.? i love to install total 8gb ( 4x4 ) or atleast 4gb. (2x2)
thanks for any help.
You should probably contact Lenovo's tech support with your question; however, as I read it, you are stuck with a maximum of a pair of 1GB SODIMMs -- 2GB total memory.
The mere fact that larger SODIMMs exist doesn't mean that your laptop's motherboard can address the memory on them.
Edited to add: Have you tried it without the 512MB module? Using only the 2GB module? That might work. Then, again, it might not. Only way to tell is to try it.
I ordered two PNY 8gb DDR3L 1600 12800 memory modulesand installed them and the computer will not boot up. I removed them and put the original 4gb and a new 8gb in and it still will not boot up. Is there a setting I need to change in the bios or somewhere else to get it to recognize the new memory? I have worked on lots of computers as and IT specialist for the last 20 years and built numerous one from scratch and have never ran into this before. Any help would be appreciated.
Hi mate not to be rude as an IT specialist you would research on the hardware you trying to upgrade i've been doing advanced roles servers, networking, security and web if i want to upgrade something let's say a lenovo thinkpad laptop i'll check on lenovo website see if they got any information about it or i'll email them let's not get off track but do the speed of the new ram match with the old ones any have you found out how much ram can the computer take if not please research about. Kind Regards Uways Khan Just an update here are the specs of the machine for the ram. Memory4GB DDR3L SDRAM (1 DIMM)Memory MaxMaximum supported = 8GB
I am a NOOB so help please..
I have 2GB of ram (2x1GB @800) and that wasnt bad for my ex WinXP 32bit. Now i have Windows 7 64-bit and i want to upgrade memory.
1. Type of memory (motherboard manual says all memory moduls should be from same manufacter and with same chips used)
BUT PC is old, allmost 2 years, and i cant find same memory moduls anymore, can i put any DDR2 800mhz modul?
2. Size. Motherbord support 8GB, 4x2. But i got 2x1 installed, so i would add another 2x1 for total of 4GB. Is that ok?
Any advice would be great
I think as long as you buy THE STICKS @ 800 its wiil be ok with the same timings (best match brands) - post the name and specifics of the memory or do this eg mine is Corsair Twin2x 2048mb 240pin ddr2 800mhz PC6400 Twin pack (2x1024 sticks) w/heat spreader, 4-4-4-12 - copy the details in your browser search, and press enter, and you should find a list of online stores - i just typed it in, and there were only a couple, but this one is all you would need - just have a look and see if you can find something similar for your country -
Memory | Compare Online Retailer Prices in Australia | Smazoo
or search for online shops you must still be able to buy it online - just type anything browser like "buy memory online" and you well get results
If you cant find any, make sure you match up specs with a different brand .
Memory so cheap now you might want to upgrade to faster sticks at 2x2048 =4090 gb and use them instead if your a gamer.
Greetings, I would like to upgrade my memory on a Dell Inspiron B130. I opened up the back and there is what appears to be two 256mb cards installed. So, if I want to upgrade to 512mb do I need to purchase two of these cards?
Greetings, I would like to upgrade my memory on a Dell Inspiron B130. I opened up the back and there is what appears to be two 256mb cards installed. So, if I want to upgrade to 512mb do I need to purchase two of these cards?Click to expand...
go to crucial.com plug in make and model
Hello! I have an urgent question:How do i get more RAM on my laptop? PC Processor and Memory: (64 bit) Processor - AMD E-3O0 With Radeon(tm) HD Graphics 1.30 GHzMemory/RAM - 4.00 GB (3.60 usable) Why is only 3.60 GB usable and not 4.00GB? I know, i know this is not the best laptop but im getting a new one soon, until then what do i do?http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Memory-RAM-upgrade/td-p/5645449
Hello,I have a emachine T1140 that currently has 128 ram. I wanted to upgrade with another 128 but when I install it my monitor won't work. If I install it while the computer is running my mouse pointer won't work. What is the problem? And can ANYONE HELP me?
Welcome to TSG.
You are very lucky you have not fried your motherboard.
NEVER install any component in your computer without first unpluging it.
I just found out that HP won't answer a simple question if my notebook isn't under warranty, I guess that's why there are forums. On my notebook, I'm assuming there are only two memory slots because one slot has a 4GB memory card and one more with an 8GB card. I just need to know if I can change out the 4GB card for an 8GB card? And to find out what the capacity is for my notebook....if it can even take 16GB?
deerpark243 Hello;Allow me to welcome you to the HP forums!I read your post about upgrading memory and wanted to help.This link is to the Service and Maintenance Guide for your PC: http://h10032.www1.hp.com/ctg/Manual/c03943414 On page 5, it has the memory information you need.Good Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------If my posts helped you, please click the Thumbs-Up symbol to say thanks.If my posts solved your problem please click "Accept As Solution".========================================================================http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Upgrade-memory/td-p/5611943
Hi, I want to upgrade my RAM Memory to 512mb, I have never opened a computer case never mind doing an upgrade! is it possible to find ( on the net ) some clear, concise instructions to help me? I dont want to cause a bang and a flash and end up PC less!....thanks
I WANT TO UPGRADE MEMORY FROM 128 MB, BUT AM NOT SURE WHAT IS CURENTLY TYPE INSTALLED. I KNOW THERE ARE 2 CARDS ON BOARD NOW,(2X64 ?). THERE ARE FOUR SLOTS ON THE BOARD, THE CARDS INSTALLED NOW TAKE UP TWO,W/ TWO OPEN. DO I REMOVE THE TWO THERE, & INSTALL A LARGER SIZE, OR ADD TO WHAT IS THERE?
What kind of memory? EDO SDRAM 66 100 133?
The model of your motherboard would help a lot. Open your computer and take a look between the PCI-slots. Or download Aida32 diagnose tool from here .
Hello to all
Gateway 500 S ( Essex model) 256MB RAM
Pentium 4 2.4 GHZ processor
WindowsXP SP2 Home Edition
I would like to add an additional 256MB of memory to the above mentioned machine. Gateway Remote Assitance has told me that I have two memory slots. Currently, they are occupied by two 128MB cards. I need to purchase "in pairs" according to their instructions ( I.E. two 256MB cards) and remove the current 128's and replace them with the 256's which leads me to my specific question. In my System Tray, I have a "Safely Remove Hardware" icon. How does this icon figure in to the overall procedure in getting this upgrade in place and do you have any suggestions about a good way to accomplish said upgrade ?
Thanks in advance for any and all assistance !
ignore the message in the system tray
you need to power off the machine and then open the box and replace the two memory chips with chips compatable with the PC
heres a website with images to show you the type of thing involved
have a look here
this will tell you about compatable memory
I currently own a Dell Dimension 8100 with 256mb Rambus DRAM (RDRAM) for RIMM Socket (400M, 64x16, 8C). I am looking to upgrade my memory and was wondering if 800MHz memory would be compatible with my computer (instead of buying 400MHz).
Also, when browsing thorugh memory for sale online, what does it mean when it says "SPD 16 bit 2.5 volts 3.2GB/s 45ns" in the product description and is this important to my purchasing decision?
Thanks in advance for all your help!!
i also need rimms for my gateway...heres a link for buying memory
I need to add memory to an Acer Aspire Z5101 / Z5109 All in One desktop computer. the item can be seen at
Crucial have the 2GB memory modules and I am advised that the Maxm is 4 x 2GB modules.ie 8GB (it has 3GB at present)
My question is how to access the motherboard as the case has no obvious ways to access it.
I can remove the rear stand but nothing else seems clear
Here is the support site for the Acer Aspire Z5101 All-In-One.
This is from its on-line user's guide:
You can expand your AcerSystem system quickly and easily by adding components.
You can also upgrade the components of your AcerSystem system.
Opening the computer
Before removing any panels or covers, please make sure to shut off the computer and unplug the power cord from the outlet.
• Remove the screws on the chassis.
• Slide the panel off.
Setting up new components
You can only use components compatible with AcerSystem computers.
Before you choose new components, please ask your authorized Acer dealer whether the part will operate within your AcerSystem system.
In order to ensure proper setup and installation, please refer to the instructions provided with your new components.
Probable upgrades are:
• Upgrade to high-capacity HDD
• Expand high-level memory
• Upgrade from a CD-ROM drive to CD-RW, DVD-ROM, DVD/CDRW combo or DVD writer (selected models only)
• Install additional interface cards in empty PCI slots, e.g., PCI fax/modem card (selected models only)