I removed some spyware and recovery from Manager not Recovery Gateway the does work viruses from my father-in-laws computer It works ok for a little bit but then I will get a BSOD with the STOP x e error I do not have the peripherals that originally were installed on the system as I only took the tower to work on and have my own mouse keyboard and monitor installed Would this cause the problem At any rate I want to use the Gateway Recovery Center to do a factory system restore When I open it up and chose the factory restore option it wants me to restart my computer I chose to restart but it doesn't do the restore I have also asked it before to do a scandisk check recovery from the Gateway Recovery Manager does not work on start up but it won't do that either I have the mini dump files from the BSOD messages but I am just wondering if I should go ahead and take it back to his house and hook up the normal monitor and such and see if I get the BSOD then It doesn't seem to have any particular triggers like now I have had it on and running just fine for about minutes just trying the things that I have tried before It is running Windows Update now as it hasn't had any updates since March of this year I did a System Restore and then used Spybot S D to remove what was there whatever it had at the time would cause the computer to go to a blank white screen after about seconds on the desktop at startup I was told that it had started with some FBI pop up that was asking them to send to them to unlock their system or such Spybot caught a trojan something like fakeporn and removed it Since then the computer will start up normally but then give me te BSOD after a while It will start in safemode and run ok Guide me OMG don't judge me
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
This might help:http://www.majorgeeks.com/files/det...0x0000007e seems to often relate to drivers and 0x0000008e to RAM. If there is a virus still about then you could get confusing BSOD errors.Always pop back and let us know the outcome - thankshttp://www.computing.net/answers/windows-vista/recovery-from-the-gateway-recovery-manager-does-not-work/13395.html
Every 10 seconds audio manager will set the volume on my mic to 0 and mute it I have already tried to uninstall it and reinstall it but no result.
It may be malware but I am not sure as of yet. Would really appreciate help right now.
Problem Solved, As suspected it was malware. To fix this launch task manager, then go to start up, go through the list if something dosn't have a icon or dosn't seem to fit in right click and open its file location. If you are definite that it is malware disable it, restart go to the file location and delete all the files.
Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened I finish tower Power will not work button My the pc and My tower Power button will not work when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F PANEL cords u know the pwr switch and all that jazz turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading P S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds nbsp
You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
I recently bought a Windows DVD to put it on the new PC I'm building for my mom. That PC has troubles with the DVD drive itself (stupid motherboard doesn't have IDE..), so I figured I'd set up a bootable USB to install Windows before the adapter arrives. Problem is, the installation DVD isn't playing on my drive (I tried another DVD with a movie on it before, so I don't think its my drive). I brought it to a PC shop and for them it worked fine, even though its quite scratched on the back (I guess the person selling those DVDs doesn't know how to ship them properly) I didn't wanna pay 20 bucks for them copying the DVD, even though I'll probably end up having to do that.
Any ideas what the problem is, or what I can do? I'm not sure if the DVD will work in my moms drive either..
I have an Aspire one NAV50 with Windows 7 starter.
One time, when I turned it on, The icon for wireless connection doesn't appear anymore. Every time I try troubleshoot it, it would just say that there is an ethernet cable unplugged. And so, I connected it into the ethernet cable and it works fine. But when I tried it again on the wireless connections, it doesn't locate to any wireless connection.
I've tried the ff on my laptop:
scan the laptop with MalwareBytes
by the way, last night, when I turned on again the laptop, the wireless connections can already be found. However, after few minutes, it went back to being unlocated again.
I had doubt the Starter supports the Wireless connecting but since you say " the wireless connections can already be found.", so probably it's possible.
In this case and at the moment the thing I'm thinking about is the driver. Try to update its driver for wireless connecting. (You've said the 'update', but update of what?).
hi there my wireless through cable work will not My only ethernet internet internet was My internet will only work through ethernet cable not wireless running fine until yesterday when I tried to connect to the internet the message quot windows can t communicate with the device or resource primary dns server quot came up I followed all methods on this website http answers microsoft com en-us w -b d ec fae but none of them worked for me I then returned my laptop to factory settings in the hope it will work but that didnt not work I then realised it works through the ethernet cable but not wireless I ran ipconfig all with my ethernet cable in and this is the result SOMEONE PLEASE HELP ME THANKYOU Windows IP Configuration Host Name Nida-TOSH Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Realtek RTL CE Wireless LAN n PC I-E NIC Physical Address D -DF- A-EB- -B DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d fccc e c eb Preferred IPv Address Preferred Subnet Mask Lease Obtained October Lease Expires October Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -EB- A- A-B - -F -D - -E DNS Servers NetBIOS over Tcpip Enabled Ethernet adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Realtek PCIe FE Family Controller Physical Address B - -F -D - -EF DHCP Enabled Yes Autoconfiguration Enabled Yes Tunnel adapter isatap EEB-B - C-AC - CEB F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ef fb affc eb Pre erred Link-local IPv Address fe affc eb Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter isatap DF D AB- BF- FA - CB -DFA C Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes nbsp
There may be an issue on the ISP side or router side since restoring to defaults didnt help. Or it could be an issue with the network adapter. Or it could be an issue with the firewall.
Try downloading running these tools (download via ethernet, run on wireless): Network Fix-It Tool (right click on the internet bars on the task bar in the bottom right hand side of the screen, and click "troubleshoot network...") and Firewall Fix-It Tool.
Did you install anything on your PC before this happened? Did Windows install any updates?
Try disabling your AntiVirus. That may be the issue. I doubt it though.
Tell me if any of these solutions help.
I have a Sony Vaio VPCEH15EN laptop & the OS is Windows 7 home basic. I have a wifi router which is of TPLINK.
The wifi won't connect to my laptop but it works fine on my mobile..it would only start working when I use the ethernet cable. I never had this problem before. I have tried everything ..I also tried the winsockfix.bat but all my efforts have gone in vain..I just don't know if the wifi router is faulty or the modem of my ISP...Please help me solve this problem.
I have solved the problem by myself. To do this, first you have to disconnect your Ethernet cable from your laptop and follow the steps: Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the Wi-Fi networks. Click on the available network and select connect. After a while, you will be asked to give a password for your Wi-Fi connection. Type the password and click on connect button. And now will be connected to your Wi-Fi network via wireless.
May be it will help you.
MD. MAHMUDUL HASAN
Hi! I don't know much about this place but there's a problem with my laptop and I don't know how to solve it. My laptop won't connect to the wifi anymore but it works perfectly fine with the ethernet cable. I appreciate it very much if you tech geniuses could help me out. THANK YOU!
Are there any yellow (!) in the device manager?
Hi guys I ve been researching and trying to days to get this to work with no avail so I decided to post here for some help as doesn't Ethernet connected Wifi work cable. using working when only Internet I see this community is really active We ve got different laptops here and none of them can connect to the wifi anymore it suddenly stopped working for the last whole week We can connect to the internet through ethernet cables though We only use one at a time if ethernet then wireless is disabled and vice versa Here is a copy of the ipconfig all Windows IP Configuration Host Name PeterMai-HP Primary Dns Suffix Node Type Hybrid IP Internet only working when connected using Ethernet cable. Wifi doesn't work Routing Enabled No WINS Proxy Enabled No DNS Suffix Search List moolahd local Ethernet adapter Local Area Connection Connection-specific DNS Suffix moolahd local Description Realtek PCIe GBE Family Controller Physical Address AC- - D- B-ED-F DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe ac a d b Preferred IPv Address Preferred Subnet Mask Lease Obtained Monday October PM Lease Expires Tuesday October PM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers Primary WINS Server NetBIOS over Tcpip Enabled Wireless LAN adapter Wireless Network Connection Connection-specific DNS Suffix Description Broadcom GN b g n x Wi-Fi Ada pter Physical Address -ED-B - D- -FD DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe c f e e b fc f Preferred Autoconfiguration IPv Address Preferred Subnet Mask Default Gateway DHCPv IAID DHCPv Client DUID - - - - - -FB- -AC- - D- B-ED-F DNS Servers fec ffff fec ffff fec ffff NetBIOS over Tcpip Enabled Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap optusnet com au Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Local Area Connection Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap moolahd local Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface CE FC E - F - C C- D - D EBEC Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap DDFAF D- B- -AA A-DBE BA F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Reusable ISATAP Interface E ED - - A -BB -FB FA F F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes And here is a copy of the route print Interface List ac d b ed f Realtek PCIe GBE Family Controller ed b d fd Broadcom GN b g n x Wi-Fi Adapter Software Loopback Interface e Microsoft to Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter e Microsoft ISATAP Adapter IPv Route Table Active Routes Network Destination Netmask Gateway Interface Metric O... Read more
You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
Hey guys... I just got a new EVGA GTX650 ti boost superclocked. I just put it in and I was not getting any signal to my monitor. I tried VGA, HDMI and DVI. Nothing worked and when I took it out to try booting with my integrated graphics, I didn't get any signal to my monitor. All of my connections and wires are connected properly, my power supply is the right voltage and has enough power to support my graphics card. My hard drives are spinning but I cant access my BIOS. I have tried everything that is common. I know my graphics card is not defective and im thinking that it might be my motherboard. Any suggestions?
You were using integrated graphics before the discrete card? It's strange that your onboard isn't working if it was before hand. Usually it's just a overlooked cable or something plugged in the wrong place. Did you make any changes to BIOS? Some boards require you to change the primary display adapter to PCIE or onboard. Maybe a BIOS reset will help the situation. I doubt there is any issues with the MOBO itself. I suggest stripping the build down to nothing but the bear essential components for operation. This way you can isolate the issue a lot easier.
I was updating my graphics card drivers for my graphic card PNY GEFORCE GTX 660 and went to device manager, I used ?automatically search for new driver? and a dialog box appeared "Windows has determined that the driver is up to date".
Yet, I went to Nvidia website and did a driver update. I checked again Device manager for my display adapter and the new driver was TWO MONTHS NEWER.
I wonder why that happens.
I am considering purchasing a MSI ATX DDR3 2133 Motherboard 970 for my new computer build, and heard from somewhere that it is not compatable with windows 7? Is this true?
Where did you hear that? It will run Windows 7 just fine.
As I don't go menu and Monitor's won't buttons the work away am writing this I have this blue square on the screen with all the settings for this monitor Whichever button I press on the monitor the menu won t go away Not even the power button works so that means I can Monitor's menu won't go away and the buttons don't work t disable Monitor's menu won't go away and the buttons don't work the monitor Unplugging and plugging it back in doesn t work as soon as the picture appears the menu appears Monitor's menu won't go away and the buttons don't work as well Let me give you a bit of a history as it might help determine the cause About a month ago my old monitor monitor started behaving weird It started turning itself off every now and again Sometimes few times a minute Every time it turns off it turns back on with the splash screen saying quot BENQ quot and everything I had no idea why it does that I tried pressing the buttons on it to go into the menu but every button seemed to shut it off and every button seemed to turn it on So I gave it to a family friend to try and fix it He said that the quot control board quot started dying and that he doesn t have a spare one or something like that He then gave me a spare monitor of his monitor until I can buy a new one or fix monitor So I took monitor from him and sent monitor to the shop so they can try and fix it About a week passes and the shop calls and says that they fixed monitor I go and pick it up and when I came home I unplug monitor and plug in monitor monitor was working perfectly then Monitor worked for about minutes and started shutting down again And when I tried using the buttons they wouldn t work again Same thing as last time So I return it to the shop and tell them that it doesn t work That was about a week and a half ago They still didn t fix it The problem is now the monitor also started having problems It doesn t turn off yet but the menu buttons don t work Power button doesn t work Nothing And on top of that the menu won t disappear from the screen As I am typing this there s a menu on top of everything Every now and again the menu will switch to a different option like quot brightness quot quot auto adjustment quot and such like the buttons are being pressed Now I am wondering could it be that my PC is quot breaking quot these monitors Is there a way for a PC to physically damage a monitor What should I do in that case Also I should say that ever since monitor died and after I installed monitor my PC has been getting blue screens of death It hasn t happened once in years since I got this PC and it started after I got monitor I don t know if that s something that s important but there it is If you need more info please let me know I am trying to figure out what is happening and every bit of help is appreciated Thank you nbsp
No one has any relevant information?
I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
Neither my keyboard or mouse are working on any of the 7 USB ports on my computer. My mouse was initially working, but I read somewhere if you delete the keyboard drivers you can reinstall them and it will work again. BUT when I was doing that I stupidly uninstalled my mouse driver so now NOTHING works. I can't try if it works in safe mode because my keyboard doesn't respond when I hit f12 during boot up.
When I plug in the mouse or keyboard, I get a window that pops up asking if I want to install the hardware, but it's impossible for me to do anything because my mouse and keyboard don't work! If anyone has any ideas I would greatly appreciate the help. Thanks!
First I would try to find a different working keyboard because you should at less be able to boot into safe mode because the drivers don't even load until windows start loading.
Gateway NE56R41u laptop freezes after 5-10 minutes of running, ran many many tests and scans to try to find malware but nothing was found, it works fine in safe mode but not in safe mode with networking, please help
When something works in Safe Mode but not while in Normal it points to a driver issue. Have you tried updating your WiFi/Network Interface Card (NIC) drivers for your system from Gateway's website?
Do you use a cooling pad? Laptops can get hot quickly and high temps will freeze/shut-down a system fast.
My PC with windows 7 is the only computer with issues in the house. Ethernet works perfectly but wifi doesn't even when I don't have the ethernet hooked up. The wifi says it is connected but browsers, steam, and Itunes don't work. I have Bitdefender A/V and already tried uninstalling it, no change. I also uninstalled steam and Itunes with still no change. I even uninstalled and reinstalled the drivers for the wireless adapter. I tried looking and I don't recall downloading or installing anything around the time the problem started. Before I try replacing the adapter itself, I was hoping for help here since I saw a very similar problem in another thread.
If there is any more info I can give to help you help me, please let me know.
I have an Acer that spontaneously decided I no longer needed to play games. Everything else works perfectly fine. It's been doing this for the past few weeks and I've done all that I can. I'm no tech wizard by any means and I need some help. Pretty much it'll open to the load screen for a few moments then disappear back to my home screen. Any ideas on what it could be and what I can do?
These are the specs:
Acer Aspire V5 Touch with Windows 8.1
Model number: Z5WV2
If you need more info let me know, I still have everything for it.
If you are talking about the games that are loaded by a app. You will need to uninstall the app. Then reinstall the app. I have no ideal why this happens . But I have seen it more then once.
Hey, I'm a new member here with a problem!
I have a pair of Skullcandy Crushers with an arguably great built-in mic that turn on with a press of a button. However I built a new computer a few days ago and installed the latest version of the ASUS Realtek HD Audio manager, and while the audio on the headphones work, the mic refuses to work and isn't even recognized on programs like Skype and Hangouts.
I have tried the front two ports and tinkered with the settings and nothing has worked as of now, please help ASAP!
Yeah thats because Skullcandys aren't really built for computers, just iPhone & Android. I had the same issue with my Skullcandy headphones and decided to buy a legit for PC headset. Sorry you spent your money on them!
Can I run 1600mhz ram on a mb which is supported 1333mhz (my config MSI-760gm P21-FX 1gb asus amd radeon 5450 gfx card And 4gb rm of 600mhz.
1600 MHz RAM should down-clock to 1333MHz just fine, but I will not make guaranties. It usually works perfect, but there is always the possibility of incompatibilities.
The GPU memory and frequency is independent and irrelevant for this topic.
I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.
I installed win 7 x86 on a sony vaio vpceb36fg. Everything seems OK but the Fn keys. The combination of Fn+related keys work only for sound volume and screen lock button and not for others!
How to get all Fn keys worked please?
Is it needed to install any tool/utility?
Your laptop came with Windows 7 Home Premium 64 bit so I'm curious as to why you decided to install a 32 bit version.
Laptops, particularly Vaios, have specific functions assigned to keys. On yours you were previously able to surf the web and play DVDs without booting up into Windows. To regain all that you've lost will take quite a bit of work. The utilities you need will be on a Sony support site. However, sometimes things have to be installed in a particular order before they work. It took me a long time Googling, downloading utilities and experimenting to get everything working when I reinstalled the OS on my Vaio.
Before I say anything else, I am very new to building a computer. Ive never built one in my life. I am curious if the setup I have to far will work! I am trying to look for pretty cheap but good options for parts. So far I have a case, processor, and GPU in mind. I need ideas for the motherboard especially. I dont know how to tell if everything would work correctly, so if something would be incompatible, could you tell me?
So far I have
GPU: Nvidia GTX 760
CPU: Intel Core i7-3770k
Case: NZXT Phantom 240 Mid Tower
Hard-Drive: Seagate Barracuda 2TB HDD
Operating System: Windows 7 64 Bit
Would there be anything else I need? Also what is thermal compound and Heatsink? Are these required for my setup? Please tell me if there is anything wrong with this so far and what items I should use for the unfilled spaces! Thank you all so much!
I have a toshiba laptop right at a year of having it, it will not allow me to get internet connection even though it shows its getting wifi or set up through the router.. Is this a virus or other issue
Moving this topic to appropriate forum.
I need to figure out how to get my webcam and camera working and what drivers I need anyone gt that answer pls
Go here - http://us.gateway.com/gw/en/US/content/drivers-downloads
Then put "NE71B" in the product model box. You may also need to change the OS version to 64-bit, before a listing will show.
The camera software is listed under the application tab.
I didn't see a driver listing for the camera, so Windows may have generic drivers installed.
If reinstalling software doesn't work, I'm not sure what else to say.
Good luck with your repairs.
Hey guys, my laptop asus stopped working with wifi connection and I was just reading some posts here about this same problem but didn't find how to fix it.
I was uninstalling some programs from my pc but I didn't uninstall programs named "something wireless". I just took off what I knew I could.
I also tried the option "solve problems" in the wireless pc symbol and the answer was to connect my laptop to an ethernet cable...that never happened. Just now.
Does anyone knows how I get back my wireless connection? Pleasee
Powercycle the modem and router. Here is a specific order if you have a separate modem and router.
1. Shut down all PC's.
2. Shut down the Modem and router.
3. Power on the modem only. Wait 2 minutes or so.
4. Power on the router. Wait 2 minutes or so.
If you have a modem/router combo, then you don't need step 4.
5. Boot up the PC and see if you can connect.
I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
Obviously it's worthwhile trying both of them.
Hi all I have to the WLAN work as rather Router on from a WiFi LAN a a typical situation in my Internet and LAN setup My ISP provides me with a direct LAN cable that I need to connect either into my PC or into the WiFi Router WLAN port I also have a LAN that I need to connect to so I have installed a separate LAN card for the internal LAN purposes My two setups are below with their issues I hope someone can suggest a middle grounds to have a LAN and a WiFi too Scenario The ISP cable goes into the WLAN port of the Router Cables from the router goes into my PC network card and to other PCs for LAN purposes The PC cards are all configured to automatic IP LAN Internet WiFi is now available This works fine for a few days and then the internet stops working because there is a conflict of IP The ISP expects IPs like xxx and the one on the LAN Router for my PC is Scenario Router to work as a WiFi on the LAN rather from a WLAN The ISP cable goes into network card internet sharing is enabled Router to work as a WiFi on the LAN rather from a WLAN and automatic IP with the ISP s expected IP xxx Another cable goes from my PC s network card fixed IP into the regular LAN port of the same Router Without any issues over the months the Internet works the LAN works other PCs have fixed IPs too etc but no Wifi Can I have best of both the worlds in such a situation I can t install a rd network card for sure as the slot on the mother board is limited Please advise Thanks in advance Bhavbhuti nbsp
isp==>(wan)router-->PC card-1, et al (conflict 123.237,234.xxx v 192.168.1.100)
scenario-1 is a configuration or firmware condition
scenario-2 is a real security issue and the primary PC is basically acting as a DMZ server and is at risk.
Here's my setup:
isp==(wan)router-1--- PCs in the same room
+---(lan)router-2(with wifi) - - - wifi connections in the den
configuration to make this work with full file/print sharing:
disable DHCP in this router
setup all WiFi settings here
notice: router-2 wan slot is left empty to make this work
set LAN address of router one as you please (eg: 192.168.1.1 )
set an address reservation for router-2's MAC -> a fixed, constant IP address on that same subnet (eg 192.168.1.254)
set the DHCP range small (eg 2-32)
router-1 will control all auto-ip assignments for both routers.
Personally, I add another tweak;
reserve ip addresses for all of my devices into the low-end of the dhcp range (say 2-10) and
let 'guests' take addresses above 10
This gives the opportunity to allow file/print sharing to known systems (2-10) and disallow for the guests.
Setup totally within the routers allow my laptop to travel and not be effected by these choices.
Well I am accessing my remote router via and it works access work via phone, Remote PC doesnt via ok when I am using my Phone s Remote access ok via phone, doesnt work via PC browser chrome or IE on Samsung however when I am at computer at work I cant access my router I ran Tracert and I am getting up to hoops and th says quot Request timed out quot lt ms lt ms ms lt ms lt ms lt ms lt ms lt ms lt ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms ms Remote access ok via phone, doesnt work via PC ms ms ms border ge - unitedair- chg pnap net ms ms ms core te - -bbnet chg pnap net ms ms ms ae - chi ip gtt net ms ms ms xe- - - chi ip gtt net ms ms ms c-eth- - - -pe ecermak il ibone comcast ms ms ms he- - - - -cr ecermak il ibone comcast ms ms ms ms ms ms te- - - - -sur mortongrove il chicago com net ms ms ms te- - -cdn mortongrove il chicago comcas t Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Request timed out Trace complete Anyone would know why it works on the phone and doesnt really go through all the way to the end nbsp
Ok I have to ask first when you are using your phone is it always using mobile data or do you connect it at work via wifi? When reason that makes sense to me is at your work they maybe blocking the remote port. I guess it all depends on what you are using also. If you are just using standard RDP then they might be blocking port 3389. If you could give further information on how you are connecting remotely whether using software such as teamviewer or just standard RDP. Also how do you have your router configured. I can better understand witht is information thanks....
My Gateway NV52 keyboard randomly stops typing o, p, l, ., and (.
All f a sudden it starts working as normal. Again while I am typing, the above mentioned letters stop working.
I checked for dirt stuck under the keys but nothing was there
the weirdest thing is, I tried a USB flexible keyboard instead and that was working properly for a while and that o, l, and . stopped working on that one as well.
I am confused why it's happening., and sick of filling the blanks of o, p. l with "on-screen keyboard". Please help me to figure this out.
Thanks guys, appreciated.
I have a problem with my laptop.
Sometimes the space bar, n and enter key stops working. When this happens, I can usually hit the button a few times and the key finally registers. It happens randomly and quite often. But sometimes I can type for hours without it happening.
I have not spilled any liquid on my laptop and I haven't dropped it. The problem started randomly a few months ago.
Does anyone know what could be causing this?
The laptop is an Asus K55V. It is nearly 3 years old
Not sure if this might work that well, but give it a try! If it doesn't..go to a technician...its probably the best idea.
Shut down the laptop, removed battery and cable for a moment, press and hold the start button for 60 seconds... and replace the battery.. start the lap top.
Hope this helps!
What the title says. I bought a TP-Link WDR4300 and installed it, and everything works perfectly on every device except for my laptop (Windows 8.1 Lenovo G480, running Windows Defender as AV). When connecting wirelessly, I get access to the router, but it shows "limited", and it doesn't even let me get into the setup page (192.168.0.1) and when I ping it, every packet is lost. Ethernet, meanwhile, works perfectly. I'd appreciate any suggestions on how to fix it.
I'd like to attach the ipconfig outputs but my command prompt is in spanish and some of the characters are missing in the .txt file, too. I don't know how to get the file in english.
@jobeard I saw one thread you solved in which you said to mention you so you could help. I'd really appreciate it. Thanks beforehand for any and all suggestions.
Hi, You will always have to use the ethernet (Cat 5) cable to get into your router's software, at 192.168.0.1, all routers are set up like that for security reasons.
It's done that way so that no one can change your settings, passwords etc using a wireless connection, you must use the Cat 5 cable to make setup & security changes.
Did you get any setup software with the TP Link router?
If you get good internet access using Windows 8.1 using the ethernet cable, it
might point to possible wireless driver issues.
It might be worth downloading the latest driver for your WDR4300 from the TP-link website;
I had a drive go south on me, looks like the MBR, MFT, and the backups for them got trashed on the drive after a reboot. The drive itself still is fully operational, and my usual go to software, ZAR, unfortunately is not doing the trick. Does anyone have any other suggestions on what to try?
I've used a program called testdisk to repair a messed up MFT, it's free.
My internet wont work, ive tried using both crome and IE but both browsers say that I am not connected to the internet despite the fact my computer says that I am connected to the internet. I know its not a network problem because my other devices are connecting fine. Also I tried connecting to the wifi at home and at school and it still does not work. My laptop is a HP ProBook 6390b and I am using windows 7. This problem started occurring after about 4 months disuse of my laptop which I think might be a factor as to why its not working. I have run windows updater and run a scan with my antivirus but still nothing helps. Thank you for any assistance in advance.
Have you kept up and installed all the Windows 7 updates and are there any yellow (!) in the device manager?
I got a hp 6371it
link --> (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02054227&tmp_track_link=ot_faqs/top_issues/it_i...
I have this problem: I bought a kingston Dimm ValueRam 4GB DDR3 1333MHz Non-ECC CL9 (it is compatible with my mb according to hp website). I installed it on my pc and:
1) if I install just that ram it works fine
2) if I install that ram I bought and one ore both ram I had already installed in my pc it doens't work or it blocks on hp main screen or it appears the classic blue screen of hardware error and it never enter on windows (it asks for a system reinstallation)
what is the problem? should I do something else? I tried mounting rams in different slots, I tried everything
Sound as though the ram you bought is not compatible with the existing ram. Is the ram you bought the same specs as the old ram?
About a week ago, our cable internet connection went out. Before I had a chance to reboot the modem & router, my 11 year old decided to completely reset the router to factory settings! Ugh! This caused several issues: my home network is now gone, only a unsecured factory network is available. When I try to plug my laptop into the router via ethernet cord (in order to login to router and setup secure network) my computer will not recognize the router and won't connect to internet. I tried troubleshooting with my cable provider and they say it's in my computer (IP address will not reset) and he recommended I replace my network card. However, today when I brought my laptop to work, it will instantly recognize the wifi at work. So is it really my network card that is causing issues? Please help, I'm desperate and not tech too tech savvy!
Linksys wireless router
Charter cable modem
Hp pavillion dv6 laptop with Windows Vista OS
Did you figure this out?
Hi can any one help I cant hear any sound on my laptop its all turned up but when I conect it to my tv the volumes fine but soon as I disconnet from the tv the sound ont go.
Did you fix this?
Hi, hope I've put enough specs in profile for you to help. I have a Compaq Presario 6735s I bought around 2008. CPU quite slow but graphics card not bad so made decision to upgrade. Looked up the laptop manual here to find compatible CPUs for motherboard, socket type etc. Went through 3 different (*****ic) buys before I found one that actually fitted.
Now with everything reassembled, screen will flash up once upon powering on, then nothing. All usual lights come on, even my wireless connects, makes usual start up noises, fan, dvd drive etc ....
Proceeded to take everything apart again, re-connected everything I tampered with. Even RAM, which I didn't have to remove before.
Still same reaction starting up.
Really frustrated with myself as thought this would be the right one. Could honestly cry, haha.
I read the tutorial on here called 'No POST' to no avail either. I really hope it can come back from this.
One last thing I can think of (before pulling new CPU out) is upgrading BIOS to support new CPU but with no screen I am stuck.
Can someone please give me a little direction?
Did you re-install the old CPU to see if the laptop booted normally again? Upgrading CPU's on laptop motherboards can be a very difficult thing to do. What is supposed to be compatible in reality is not
I've bought a cisco linksysX-1000. And I can't ping to the gateway. I was previously using an aztech modem but I had to flush the power on it a lot so I bought the linksys. Now, I've configured the linksys but can't ping to the gateway, whereas the aztech has no trouble. Please help.
I have a sony SD Card 16gb class 4 card. I did use the card for almost 3 months, when I tried to use it now, I am not able to access the card,
I tried recovery softwares like recova etc to recover the file, but I was not able to recover even a single byte.
I have many importants files in the CARD, PLEASE HELP ME...,.
I think >>this thread<< could help you out . He seems to have the same problem.
Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp
So currently I have a modem in the living room Cisco EPC and then it goes all the way to my room to a Cisco WRTG V router Yesterday out of the blue it stopped working This is because I previously had routers in the network Asus and Cisco anyways I decided to disconnect my asus and use only the cisco but the router just won t work I reseted it to it s fabric settings But when I log into it it says the router s IP adress is And hands out IP adresses to my pc such as I have no idea what to do Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users MiKi gt ipconfig all Windows IP Configuration Host Name MiKi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No DNS Suffix Search Router work won't properly List sbb rs Ethernet adapter Local Area Connection Connection-specific DNS Suffix sbb rs Description Intel R V Gigabit Network Connectio n Physical Address - B- - Router won't work properly -B - E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local Router won't work properly IPv Address fe d d ca Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday June AM Lease Expires Wednesday June AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -B -D -EB- - B- - -B - E DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter isatap sbb rs Media State Media disconnected Connection-specific DNS Suffix sbb rs Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter Teredo Tunneling Pseudo-Interface Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address d abd e a Pref erred Link-local IPv Address fe e a Preferred Default Gateway NetBIOS over Tcpip Disabled Tunnel adapter TO Adapter Connection-specific DNS Suffix sbb rs Description Microsoft to Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes IPv Address ebd bbaa ebd bbaa Preferred Default Gateway c c DNS Servers NetBIOS over Tcpip Disabled C Users MiKi gt This is my ipconfig with the modem and this is with my router Microsoft Windows Version Copyright c Microsoft Corporation All rights reserved C Users MiKi gt ipconfig all Windows IP Configuration Host Name MiKi-PC Primary Dns Suffix Node Type Hybrid IP Routing Enabled No WINS Proxy Enabled No Ethernet adapter Local Area Connection Connection-specific DNS Suffix Description Intel R V Gigabit Network Connectio n Physical Address - B- - -B - E DHCP Enabled Yes Autoconfiguration Enabled Yes Link-local IPv Address fe d d ca Preferred IPv Address Preferred Subnet Mask Lease Obtained Wednesday June AM Lease Expires Thursday June AM Default Gateway DHCP Server DHCPv IAID DHCPv Client DUID - - - - -B -D -EB- - B- - -B - E DNS Servers NetBIOS over Tcpip Enabled Tunnel adapter Teredo Tunneling Pseudo-Interface Media State Media disconnected Connection-specific DNS Suffix Description Teredo Tunneling Pseudo-Interface Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes Tunnel adapter isatap BE - - BA - E- B A F Media State Media disconnected Connection-specific DNS Suffix Description Microsoft ISATAP Adapter Physical Address - - - - - - -E DHCP Enabled No Autoconfiguration Enabled Yes C Users MiKi gt nbsp
Have you tried pressing the reset button on the router? (long press)
I have seen this 'reset button' on several router brands/models like tp-link (tl-wr941n, tl-wr740n old version, tl-wr740n newer version), buffalo draft-N routers, cdrking routers (made in china router brand sold in the Philippines).
if the reset process I described is the same as what you typed in your first post, try to manually change the router ip address.
my wimax modem ip address = 192.168.1.1
so for the tp-link wr-740 router, I use ip address - 192.168.0.1
login to your router and change it. if there's any save button, click it. my router prompts me to reboot the router. after a few seconds, the preferred ip address I have chosen is good for use.
(I have hidden my MAC address)
My laptop had headphones plugged in because I was watching a film but while I was in another room my laptop was knocked onto the floor around - ft drop change mic to a HD audio headphones Realtek port? port a manager, landing on the headphones jack the wire is fine but the ports completely broken I can see cracks and its loose and everything The laptop has Realtek HD audio manager and in my experience of this program on other desktops I ve had I was able to change Realtek HD audio manager, change a mic port to a headphones port? what port does what My laptop only has a headphones port and Realtek HD audio manager, change a mic port to a headphones port? a mic port and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic however in Realteks audio manager I can t find out how to do this In pictures I ve seen on the internet there is a quot Device Advanced Settings quot button as seen in this picture http www vistax com attachments ealtek-hd-audio-driver-version-hd manager jpg but my program doesn t have this Do I need to download a newer version of the software or is it just not possible to change my mic port to be my headphone port I dont mind if I have to use third party software I just want it to tide me over till I can get it sent away Thanks for suggestions greatly appretiated nbsp
I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.
Your best bet is to get the damaged port repaired.
I've bought a Sound Blaster Recon 3D a year ago.
It works awsome ! But this morning it was off the light and cannot work while plug in any computers.
I am very bored and nervous, I think it was broken down and cannot work anymore.
Am I right ?
Please say NO and help me
Thank you very much.
Hello My sound chip on my board was blew for no reason bad thing only being a month old bored and I am not waiting days to rma it and for me to get it back anyway I managed to pick up a old sound card not sure on the model Motherboard? Work. Not Maybe Did Sound Card that worked fine for three days then stopped outputing audio so I bought a sound card intex cmi that did not have the bit wndows dirvers and everytime I turned the computer off the machine would not detect the card I then I have to press the reset button or turn the system a few times to get the card to be recognized again and I could not also find the drivers for the OS Sound Card Did Not Work. Maybe Motherboard? I checked at the back of the cards box and it says bit pci bus master What does the mean could that be that the card was not compatible for the stystem or could it be the motherboard I tried a nvidia video card in the Sound Card Did Not Work. Maybe Motherboard? PCI-E slot and the card works fine with no faults The sound card was using the PCI slot and I tried every PCI slot My Motherboard asrock fm a x extreme Thanks nbsp
I tested in a very old card from 2001 or 2004 something like that and it appears there's power going through the card so that's the plus.
Maybe it's because I'm using old crap and the sound card model is old?
My laptop doesn't work with wifi when I first open it. It will show at the bottom of the screen that it is fully connected and has full bars, but when I open the internet the pages will not open. I must restart the computer and then it will work. How can I fix this?
When the WiFi is active, the laptop NIC should be disabled - - easy - - just unplug the the cable to the router.
My internal HDD failed due to a sudden power outage. I can hear beeping sounds like the motor is trying to spin the drive up and failing to do so. This drive contains all my important data ( documents, photos and videos), I'm thinking of taking it to a data recovery center, How much would it cost me for a data recovery service? I've been recommended to WeRecoverData data recovery labs by an IT person, Anyone have experience with them? Any help advice? Thanks in advance.
Likely thousands. Hopefully in the future you will make backups of important data.
If it was killed by the power outage, you can probably fix it yourself by purchasing the exact same drive on ebay or wherever and swap the PCB.
What command do I type in Command Prompt if I want to use Last Known Good configuration
Boot into Safe Mode (F8), that's where the option is located
Hi every one this is my first thread and I'm having a problem with my laptop so plz help me
there is a strange processes in the task manger called diduytt.exe there is more than one but with the same name I can end all the processes except the last one I cant end it
but after a while these processes start coming up again and my laptop start to heat up and I located
the place of the processes every time I delete it it dose come back again
Not sure here but you may have a virus. Have you tried running a virus scan?
Yesterday, I started a download and kept the pc on with my Seagate FreeAgent GoFlex External HDD 1TB plugged in. After I woke up I realized that there was a power cut and the computer went off unexpectadly (I had no UPS or any backup system).And, I found that my Ext HDD was not seen in my computer anymore (It was working perfectly until before I went to bed).
In device manager, under 'Disks' it shows 'GoFlex Hard Disk', but in BIOS or Disk Manager there is no sign of this HDD.
I really need the data in the HDD badly. Please help me recover it.
P.S. I read somewhere that keeping the HDD in freezer might help and give a little more time. Is that true? Worth the risk?
Power outage probably killed something in the enclosure or its PSU. The drive in the enclosure is probably fine. I would remove the drive from the enclosure and put it in a dock or install it in a desktop computer before considering freezing it. Freezing is usually reserved for click of death drives, and a last ditch effort.
I hope this is the right section to ask this question in. I'm a big newbie.
I'm having an issue that I have no clue how to solve. There is a specific webpage that I try to view at home with my laptop, and it never loads on Chrome and Firefox, but does on Explorer. But when I take the same laptop to work or school, it does load that website on all browsers. I also have a desktop that stays home, and has the same problem. Its so strange. I don't know if it's a network thing, or an facebook app thing.
I've tried re-installing Chrome, deleting all cookies and caches, disabling all extensions or plugins, and updating Flash and Java. Any ideas?
Mod Note: Facebook game link removed, you are too new to be trusted fully. Problem m ay be solvable without the exact game anyway.
So my deafult gateway dosnt start with 192.168 but for my laptop it does and my brothers pc does for me it starts with 184.108.40.206 Any Help I cant portforward Help me il try anything and my Router is Technicolor
Can we assume "my laptop it does and my brothers pc does" applies to his pc connected to your router?
login as an admin, get a command prompt and issue these two commands
netsh winsock reset
netsh int ip reset c:\resetlog.txt
Friends and neighbors, last March I had such a system crash that, due to the number of bad HD sectors, I had to replace the HD. The HD with my various tools was not even detectable. My system ran Windows 7 64-Bit and IE9. The computer is an MSI notebook. Anyway, while doing some searching to diagnose another problem, I registered for this site after seeing Puppy Linux, whose page I saved to my Favorites. Having kept the old HD, in case I could salvage any data, is it possible for me to use Puppy Linux on that old HD? Thanks. Your answers will be a great help.
Hey Louis. We don't know how bad the drive is, but you can try putting the drive in a USB enclosure, formatting it, then install Puppy Linux on it, since apparently Puppy Linux doesn't require a lot of space and can also be run from RAM according to the Wikipedia link.
Hello! I live in a college apartment (so no access to router). When I hook up my ethernet cable to my computer, all of my messengers work and are connected but I cannot use internet browsers. I recently reformatted my computer and was using a wireless adaptor, but here the internet is so slow that there's really no point and for a decent connection you need to be plugged into the wall. The wall connection worked fine until I reformatted.
This happened before when I moved to my first college and had to use the ethernet cable. I've done everything from messing around with internet explorer proxy settings and whatnot, but what did work was something I found in a thread. It instructed me to go somewhere and delete a file that was blocking the internet part, I guess? I deleted this setting/file and the ethernet connection worked just fine afterwards. I can't find this thread (probably not on this website) anymore. Does anyone here know possibly what the file was?
Check for optional Windows Updates, specifically a network driver. The most common name is Realtek.
And/or try installing this driver. - Software: Drivers & Utilities
If still no go, which computer do you have?
I am using windows 7 and my webcam is not working,whenever I tried to use to it says "webcam not detected ". even it is absent in device manager and I hope someone will help me to solve the problem.
What is the exact brand and model # of your laptop?
Just got the new mouse home, but to enable aim precision and other programmable buttons and need to get the drivers. When I try to download them it says plug in the device, which is already plugged in and I have also tried in different usb ports and safe mode. Anyone with this mouse got it to work?
I have a headset set with a mic. It has 3.5mm plugs for the mic and the speakers. Just recently they stopped working together. What I mean is if I have either one of them plugged in, that one works. If I have both plugged in, the sound manager appears as if neither of them are plugged in. I've tried other headphones with the jacks and get the same result. I've tried reinstalling the driver, doing a system restore and using CCleaner to clean my registry. I've also messed around with just about every setting in the audio manager. Anyone have any ideas? It's odd that they work independently, which leads me to believe that the insertion detection is working just fine.
I have a Toshiba Satellite R845-S95 with Windows 7.
Turn off the insertion detection on realtek. Top-right corner somewhere, from memory.
I have owned this computer for several years now and I have found one critical card video FX Gateway 6831-03 error it has After I Gateway FX 6831-03 video card paid for a year warranty Gateway FX 6831-03 video card just a few weeks later the video card overheated I thought this was because of the long days of gaming but I started noticing that it occurred regularly after that point about one every two months then each month and the time frame kept getting shorter until today which now I Gateway FX 6831-03 video card cannot get the video card on for any length of time I would like advise from anyone who has the knowledge how can I fix the video card best at a low cost as I am now in college paying rent and such Is it better to replace the video card or is it better to get it fixed somewhere else Would it be better to buy a new computer and move all my personal files to that computer and if so which computer is best Also is it possible to change to an nVidia Graphic card even though my computer came with an ATI Radeon originally Any advice would be much appreciated as I need this computer for both college and for my gaming and video editing past time Thank you -Emerald Mercy Moderator note Moved from this thread - http www techspot com community t -desktop-pc-review page- post- nbsp
How often do you clean out the PC? It could be time to blow the dust out.
Have the fans been checked, to make sure they are still functioning properly?
I've been putting together this build as my first gaming PC and I'm wondering will there been any compatibility issues between any of these parts?
My budget is roughly: £500 / $800 / ?600
Any advice is appreciated
That's a pretty sketchy power supply, I wouldn't use it.
That is OK, but I think it would be easier for you if you just got a wifi enabled motherboard.
HDD 1 tb Seagate hardisk not working,is not visible in the laptop, can b seen in device manager for 1min then gets disconnected automatically and the light on the hard disk starts blinking
If the system worked before with this drive, I would say the drive is bad.
The n key had been not working properly and now it stopped all together. I took the key off and tried pressing the white piece of soft plastic but nothing shows up. Is it time to get a new keyboard or is there something else to try? It seems like such a waist to throw out a keyboard when 1/100+ keys stopped working.
Try it on another PC and see.
I have a Gateway Laptop with Windows 7 and a built in HD camera. If I am video calling on Yahoo or wherever the cam works fine, but it does not show up on my Control Panel items I.e. "devices and printers". However under Device Manager is does show up and says it is working properly. However since it isn't listted in my devices and doesn't show up when I searh "all programs". I can only use it when I am video chatting in Yahoo IM. Otherwise I can't find it and therefore cannot bring it up
What is the model # of your Gateway. I would expect that when you double click and open Computer the device should be there as well.
Also, have you looked at Gateway's site under Support for your computer model # to see if any special apps are offered for your cam?
I don t get why my touchpad doesn t work when I unplug or turn off my mouse I found all the settings I realize I may get an answer I don t want Download drivers etc I can live with this problem unless I suddenly don t have my other laptop especially after spending the night searching for downloading and installing drivers for doesn't work Touchpad my other laptop I was surprised to find that the windows professional my home machine is windows home didn t provide me with network and Touchpad doesn't work other drivers I wasn t seeing any wireless connections Initially I was using an internet stick and the problem wasn t visible I take that machine out with me I had it home last night and that s when I found the problem And trying to get that touchpad driver had me wondering about this one I don t use my laptop keyboard on my home machine preferring a natural contour full keyboard I plug in so I never deal with the touchpad otherwise I d be hitting it all the time which I used to do I am a mouse guy If I had to to take this machine out the touchpad thing would drive me nuts Any thoughts nbsp
Some computers have keyboard shortcuts which could be a separate key on the keypad or a combination of the Fn + any other Function key depending on the system model for enabling or disabling the touchpad. Since you have not mentioned the system model of your computer, some steps you may try are:
1.Go to Control Panel > Mouse > Device Settings>Click Enable (if disabled).
2.Check under Mouse Properties in Control Panel>Hardware>Mouse. There may be a check-box for Disable Touchpad/Pointing Stick when external USB mouse is present. If this is checked and you connect an external mouse to your laptop, the touchpad may be disabled.
Additionally, we recommend you check the system manual or try some of the steps mentioned in the link below.
Click on this Microsoft link to troubleshoot Mouse, touchpad, and keyboard problems in Windows: http://dell.to/1arqGvz
Hope this helps resolve the issue. Please reply if you have further queries.
Thanks & regards,
I get this DSL line into my house. It goes to the "DSL" connection on a Thomson TG546v-v7 Gateway. Then, a LAN cable goes from the "Ethernet" 1 connection on the Gateway to the "Internet" connection on a Linksys WRT54GH Router. The Internet Connection Type on the Router is set up as Static IP.
I'v read that the Gateway is to communicate between different network layers.
But would it be possible to set the Gateway up as a Router also?
When I connect my PC to the Ethernet connection on the Gateway, I get no IP and stuff, making it impossible to access the Gateway. How can I access a Gateway, without knowing IP?
Hope you can help me eliminate the Linksys Router, and get the Gateway to work as a router also
Hey SirBlaBla. Your Thompson gateway is a combo DSL modem and wired mode router. Just connect your pc to one of the 4 LAN ports on the Thompson. You might have to call your ISP if specific settings need to be changed because you are using DSL. If your phone service comes in over this DSL line, make sure you use a splitter to split the signal, with one side going to the Thomson, and the other side going to your phone. If used in this way, make sure you use a DSL filter after the splitter on the line that goes to your phone so it removes the DSL signal from reaching your phone. This Thompson unit does not have wireless capability, so all pc's must be connected by Ethernet cable.
I'm looking at a HIS Radeon HD 7950 for my computer and I'm curious if it would be the right choice to play new games at high to ultra settings? Suggestions?
Gateway FX6800-01e specs
Processor / Chipset
Type Intel Core i7 i7-920
Max Turbo Speed 2.93 GHz
Number of Cores Quad-Core
64-bit Computing Yes
CPU Qty 1.0
Max CPU Qty 1.0
Processor Main Features Intel Turbo Boost Technology, Hyper-Threading Technology
Chipset Type Intel X58 Express
Installed Size L3 cache - 8.0 MB
Cache Per Processor 8 MB
Installed Size 6GB
Technology DDR3 SDRAM - Non-ECC
Memory Speed 1066.0 MHz
Memory Specification Compliance PC3-8500
Form Factor DIMM 240-pin
Features Unbuffered, Triple channel memory architecture
Configuration Features 3 x 1 GB
Interface Type Serial ATA-300
Spindle Speed 7200.0 rpm
Type Plug-in card
Graphics Processor / Vendor ATI Radeon HD 4850
Video Memory 512.0 MB
Device Type Power supply
Power Provided 500.0 Watt
The power supply you have is the bare minimum a 7950 requires. Make sure your case has enough airflow for the GPU and make sure you have 2 six pin PCIe power connectors free on your PSU. I would also recommend upgrading your RAM. A 7950 + i7 920 probably wont be able to play games at MAX, but very close to it (if you have 8GB of DDR3).
OK, I know it's weird, but I need to run 32-bit XP SP3 on this board. Anyone know for sure if it will? Asus specs don't list XP but drivers seem abundant for it.
Thanks for any help !!!
I can't make any promises, but I'd be highly inclined to think it would probably work, just from the fact that ASUS listed drivers on their website for Windows XP; if the board wasn't supported, wouldn't they simply not allow you to choose it as an OS selection when downloading drivers? Maybe when they omit XP from the supported OSs list, it's only because it's not fully supported, in terms of long-term updates, even though the OS works. Again this is just speculation, but I don't see a good reason why it wouldn't work.
I built my first custom PC a month or two ago, and this is the first problem I've encountered.
I live in an apartment complex that provides their own ISP, so my PC has been plugged straight into my ethernet port in my wall (no router). It's worked perfectly until just today.
In the bottom right corner, my computer is telling me that I am connected to the internet, but nothing's working...I really hope it's not a problem with my motherboard.
The thing is, every other device, wired or wireless, in my apartment obtains internet, so I feel like it has to be something with my computer. It was working fine last night and I came home today do start homework and it wont connect.
I'll provide whatever information may help with solving this problem. Anything at all would be appreciated.
Hey mattyg. A few questions.
Are you just using one browser or do you have the same issue when you try a second browser?
If another pc in your apartment connects and gets on the Net via Ethernet cable, is it using the same wall jack?
Is the wireless connection your wireless device connects to coming from your building's Internet connection, or could it be connecting from some other network?
What message do you get when your browser opens and cant make a connection to the Net?
I have HP dv7 2015tx running windows 7 (64bit) and I have serious problem with wifi connectivity. in last few months the wifi connection started to malfunction and randomly detect and connect to hotspots. and then it stopped working completely after a while. I tried:
-reinstalling, upgrading .... the wireless driver
-using wifi dongle
-replacing the wifi card with a new one
and I found these can not help me in this issue. the same thing happened to my blutooth connectivity last year and after I reinstalled the windows it was all fixed. but this time im not planning to reinstall the windows again.
So in my point of view this problem might be fixed if I fix the way windows is detecting any wifi access !! is there any file missing in windows related to this ?!!
Please help me in this matter
Do you have a wifi router and that's causing you these problems
are you having issues with accessing hotspots?
I have a T line at the small school I work at maximum of computers I ran line work T1 very at slow a speed test and received a Mbps I ran the same test at home and received a Mbps on a cable connection When T1 line very slow at work I ran the test at work there were only other people on a computer The school pays for the T line Part of that could be payment for actually running the line I think the connection hub was miles away We are in a remote part of PA so future options could be limited From what I know the overall Mbps is So if we have computers on the network does it work like this Mbps Mbps each Is T that slow I thought T was a good connection Has it just become old and outdated Why is it that years ago schools with hundreds of computers ran seamlessly on T and we can t run a maximum of computers on it now nbsp
You should be asking your ISP these questions.
I'm not absolutely positive, but I will state my two cents. I think all the machines on the network uses what is known as timeshare. If only one machine needs access then all the bandwidth is alloted to this one machine. But if two machines need access, time is shared between the two machines. Timeshare is split between machines making data request. Once a machine is no longer sending data request, there is no need in timeshare being alloted for the machine. In other words there is no specific set speed for each machine on the network. Network traffic is controlled by how many machines are making network request at any given time.
Why is it that 10 years ago schools with hundreds of computers ran seamlessly on T1 and we can't run a maximum of 30 computers on it now?Click to expand...
This phenomenon you mention is the Internet evolving and requiring more bandwidth as it progresses. The Internet 10 years ago wasn't bloated with as many high bandwidth websites. Dial-up was probably still common and fully functional back then. I'd hate to even make a connection with Dial-up now, it would probably take 4 minutes, for a single web-page to render.
So, I recently bought an Asus UX31a running windows 8(in may) and it was working perfectly until a couple months ago. The only browser that works is internet explorer, which is disgusting (I miss Google Chrome) and several programs such as Adobe reader, Google drive, steam and visual studio either lag for about 5 mins each whenever I want to use them (or click something in them), or I have to close them with the task manager because they aren't responding...(This includes when I want to open pdf documents in internet explorer.
I've run several virus checks with ESET smart security which hasn't ever found any viruses...
It would be a great help if anybody could help me find what the problem is.
Try using a new Windows Restore point. This may not work because of "it was working perfectly until a couple months ago"... It is most likely caused from a stubborn malware infection other than a virus
I am so close to having my new audio system established On the headphone side all I need to do is place my order However I ve run into Z for 32x, card Sound PCI-E? (Will PCIE SBX Sound Blaster Vista work?) a bit of a snag considering the sound card I was Sound card for Vista 32x, PCI-E? (Will Sound Blaster Z SBX PCIE work?) originally recommended the Sound Blaster Z to pair with my headphones Exact card here the one with the external microphone since I ll need it Unfortunately this sound card specifies Windows and as supported operating systems I asked if it would still work for Vista but the other forum headphone forum seemed to think that it wouldn t unfortunately I m not looking to upgrade my OS As horrible and clunky as it is I ve made it work for me IF it would work with Vista than just let me know and read no further If not I d love if I could get some recommendations for a comparable card I m looking for the best sound card possible given my physical and operational specs I have PCI-E slots x and x free and my OS is Windows Vista Ultimate x The card will support both gaming and music though I m more concerned with gaming than music at this point I m not looking to drop a bundle the SB-Z was a little on the expensive side but as high as or is acceptable Please let me know if you have any suggestions I m raring to place my orders haha nbsphttp://www.techspot.com/community/topics/sound-card-for-vista-32x-pci-e-will-sound-blaster-z-sbx-pcie-work.196149/
I have no idea where to start loking for solutions. NBegining about an hour ago, no key wil work twice in a row. Backspace wil only back up once, delete wil only delelt one character in a row, page-down wil ionly page down one page and not more.
If I go do something else, and come back, the key wil work again. So, by combining delete and backspace and arrow keys and re-positioning the mouse, I can type whatever I want - it is just taking a lot more effort! -Any ideas? I would put a bu nch of excalamation marks, but this is al I have: !
More info - this is happening in MS Word, Notepad, the IBM SPSS Text Editor, and Google Chrome search blank. So, not just MS Ofice.
I recently got new Intel SSD series 330 60gb in addition to my standard 1tb Samsung HDD. So I set RAID mode from IDE to AHCI in BIOS (mobo MSI X85 pro-e). Now some of SATA ports (port 3 and 5) don't recognize my HDD or CD/DVD being connected but I still can use them in windows while other ports display them normally in BIOS. Also when I switch back to IDE mode, ports 3 and 5 display hardware in BIOS.
I have 2 gb kingston SD memory card, which is password locked, now I forgot the password, how to unlock it? Plz help me in this regards.
Go for Unistal port locker
Yesterday morning I tried to clean my desktop computer inside case all I did was open the case and clean off all the fans and plugged them back in I also disconnected my computer monitor and cleaned won't work Monitor that Once I was done I plugged everything back in and turned my computer on it started up but my monitor said dvi was inactive instead of active so then it said it was going to sleep I tried just turning the monitor on and off but it just Monitor won't work goes back to Monitor won't work sleep lazy and I ve also tried to use a different monitor and video cable but it seems that did not work either same thing happened and I am Monitor won't work unable to do anything Maybe I knocked something loose or dust got in the receiving end of the video cable haven t cleaned this computer in over years I don t know just thought I would ask here before I went to get it serviced somewhere My system information can be viewed here under the information tab Thanks nbsp
Disconnect everything wired to the system. Also the power cord. Open the case use some dryer sheets and rub them into your palms of your hands. Now go inside and make sure everything is seated into the the slots. You might have to pop them up and then click them back into the slots.
Make sure everything is connected inside.First!
Once everything is AOK!
Put back on the cover
connected all outside cable connections back to the PC
Check to see if any pins are bent also.
Connect the PC back to AC power
Turn it on
I ve been thinking about upgrading my graphics card for a while now and I ve had my eye on the Geforce GTX Ti it gets good reviews and will run all the games I play on high settings I want to know if it will run on my system and if Will graphics my in card this computer? work the one I linked above looks good Here are my system specs Model Dell Studio XPS OS Windows -bit Processor AMD Phenom II X T GHz RAM GB Free Memory GB If you need any other specs let me know I Will this graphics card work in my computer? m pretty sure the Ti will work in my computer but I just want to make sure before I buy it I read another thread here and the guy had the same computer as me and installed the same graphics card successfully If you could just confirm that it would work in my system that would be great and if there is any software I need to install before I install the graphics card Thanks nbsp
Should work ok, since it worked for the other guy. Make sure your PSUs the same as his, and you're good to go.
I am looking to get the Gigabyte Radeon HD 6670 2gb DDR3 PCI Express 2.1 DVI-I/HDMI/D-SUB Crossfire Ready Graphics Card GV-R667D3=2GI (typed the whole thing just in case ) (PC spec: http://gyazo.com/851a919b86a2675f3dea7c606766d14f and http://gyazo.com/58735cf2ad81d8140ec7e8f330fbbafd)
I am looking to get the Gigabyte Radeon HD 6670 2gb DDR3 PCI Express 2.1 DVI-I/HDMI/D-SUB Crossfire Ready Graphics Card GV-R667D3=2GI (typed the whole thing just in case ) (PC spec: http://gyazo.com/851a919b86a2675f3dea7c606766d14f and http://gyazo.com/58735cf2ad81d8140ec7e8f330fbbafd)
I'm planning on buying this ->http://www.newegg.com/Product/Product.aspx?Item=N82E16814130918
I just wanted to know if it would work in my build(part list below).
COOLER MASTER Hyper 212 EVO RR-212E-20PK-R2 ...98355780
CORSAIR Vengeance 8GB (2 x 4GB) ...98355780
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz ...98355780
SeaSonic G Series SSR-550RM 550W ATX12V / ...98355780
HIS iCooler H777F1G2M Radeon HD 7770 GHz Edition ...98355780 Which will be replaced.
ASRock Z77 Pro3 LGA 1155 Intel Z77 HDMI SATA ...98355780
COOLER MASTER Elite 430 RC-430-KWN1 Black Steel ...98251416
Yes, but a 550W PSU is pretty marginal if you're overclocking both the CPU and GPU.
My pc had BIOS breakdown due to unstable electricity.. I took it to a shop, they installed BIOS but it was a wrong version.. The mainboard is D945GCNL but they installed BIOS for D945GCCR.. Everything is working good, except LAN card driver is not installing.. I tried alot to recover it to its own version, but all in vein..
Please help me..
Have you told the shop that they installed the wrong BIOS?
I am new to home networking.
I am trying to connect 2 of my apartment with network as well as all my rooms.
I wonder if my networking will work in this way? Please advise if I need to change any devices.
Hmm that diagram is most interesting - - and imo hard to determine what's what.
Try something like:
isp==modem/router --- wired --- ?
+ - - - wifi - - ?
Any help would be great.. I have just started a fresh copy of widows xp and during the installation setup my keyboard has stopped working... Got through entering the key but with 33 minutes remaining and stuck at the screen ( personalize your software ) thing have gone bad..I have no keyboard function and can only use a mouse when plugged in... Oh forgot to say its a Acer Aspire 3000 laptop.. Thanks in Advance
I removed the NEC/TOKIN 0E907 to replace it with 4x330uF. unfortunately, I lost the 330uF capcitors and waiting for another shipping. Will laptop works with out NEC/TOKIN 0E907?. My laptop is now turns on but nothing is coming to LCD and feels like dead. Is this lacks of NEC/TOKIN or another issue with LCD screen. LCD was working before the removal of NEC/TOKIN
I have a Gateway, model ID49C. I bought it new about 3 years ago but replaced its battery less than a year ago.
This phenomenon has been happening for more than a year: When I plug in my computer to charge, sometimes the front power light (orange when charging) and the light for the power button start flashing in unison and the computer stops receiving charge. It immediately stops when I unplug the computer. This only seems to happen when the computer is open -- I can still fully charge it overnight. Lately it's started to happen so often that my computer can barely charge at all from the number of times I have to unplug it.
Does anyone know what's going on, or where I could look to find more info? Thanks for your help!
Try another AC adapter...
I have a dell dimension 2400 running vista, pentium 4 pross. purchesed a dua core pross. I cant find a bios to work with my computer help.
gary szabo said:
I have a dell dimension 2400 running vista, pentium 4 pross. purchesed a dua core pross. I cant find a bios to work with my computer help.Click to expand...
Any files for your machine will be found here. - http://www.dell.com/support/drivers/us/en/19/Product/dimension-2400
If you need further assistance please feel free to start a new thread. This thread belongs to someone else. By the way, welcome to TechSpot!
Hi guys I have an HP Compaq DX one Work in Slots Don't USB/SD Built of their business designed desktops It s one of the models which has a build in set of UBB SD Micro SD slots etc however only the USB slot works I can plug an SD card into the slot not at the same time as anything being in the slot and the light which tells you it s registered an SD card shows up but nothing on My Computer I m using XP Professional I ve looked in Disk Management and when I plug in Built in USB/SD Slots Don't Work the SD card in to the slot it shows up but it has no Drive letter I have tried assigning a Drive Letter Path to each slot however when I try it comes out with the error quot This operation did not complete because the partition or volume is not enabled To enable the partition or volume restart the computer quot Now I ve tried restarting several times to no success I ve made sure the slots all have drivers and they claim to Can you help I m pretty much at the end of what I know nbsp
Check the settings for Autoplay in the Control Panel (at least Win/7 has it there).
"using XP Professional" may need a registry hack . . .
My keyboard has sudden ly stopped working , all the lights work as dose the button to switch the back lights on and off but appat from that its totally unresponsive
ive tried 2 other keyboards safemode reboots updating drivers deleting drivers and replugging in keyboards different usb ports , am I missing something really stupidly obvious here using onscreen keyboard to type everything so appologies for abruptness
Did you fix this?
I have recently seen a great graphics card that I want to buy for my computer. The only thing is I don't know whether my computer will bottleneck if I add the graphics card and PSU.
My current PC: http://goo.gl/2eBq7
It is overclocked to 3.6Ghz.
The graphics card I want to get:http://goo.gl/pT5r7
And the PSU: http://goo.gl/P276F
Any information will be greatly appreciated!
This is a better choice of a PSU: http://www.corsair.com/en/power-sup...00-80-plus-bronze-certified-power-supply.html
The A8 will somewhat bottleneck the GPU, but for the most part, it is fine.
As for your overclock, how were you able to overclock a non-unlocked CPU on a OEM motherboard with no aftermarket cooler?
Hi, so my integrated webcam isn't showing up and I'm trying to confirm whether it's died or not. I know the first step is to go to the manufacture's website, but as an Asus user I wasn't able to find anything to help me solve this problem asides from this model knowledge base.
Here's my Device Manager Data link below (first time using mediafire so let me know if it works)
Windows 7 x64
Thanks so much!
Guys am new to forum forgive me for my errors
my laptop hard disk is not working on my laptop but work on my pc. when I connect it to lap it jest hang on posting(power on self test) but when I connect it to my pc it works. also when I boot with linux mint cd it shows that hard disk is not good
The partition is good (assuming you can read data when attached to the PC) but the MBR is corrupted.
I've just bought a new WD My passport 2TB 3.0 external hard drive and for nor love or money I can't get it to work.....
As I plugged in the device my computer pick ups " new hardware device added" with the ping sound. Yet when trying to install the drivers It stays stuck on the " Instal wizard will guide you" dialogue box.... it then prevents me to connect to the internet and the the only way I can remove the " Install wizard...." dialogue box is to shut down tha comp by maually holding down the power key.
Anyone help me out on this,,,I'm going to return it if I can't get it sorted.... really not happy with the brand western digital so far.
Also the drive is not visable in "My Computer"
What version of Windows do you have installed? External USB hard drives usually don't need any additional drivers
Up until days ago my laptop was working fine Then all of a sudden while transferring files to external hard drive it just froze and that was pretty much the end of it It got to the point where this would keep happening and I know help recovery Need data with it s not good but I ended up just forcing the computer to shut down by pressing the power Need help with data recovery button then the computer wouldn t even boot up I ended up just buying a new laptop btw the external hard drive from my old laptop works fine I bought a hard drive enclosure for the old hard drive from my old laptop to recover some data the hard drive shows up as LOCAL DISK on the new computer but it freezes up when I try to access it everything else on the new computer working fine and can t even eject it Whenever I try to do something with the old hard drive it just takes a long time or there s no response or it freezes It even prevents my new computer from booting up or shutting down Is it hopeless to retrieve some data from this drive or is it a lost cause Really appreciate any help Thanks nbsp
The drive may have some sort of malware on it. Download Malwarebytes Anti-Malware, and run a custom scan on the drive. If it comes up clear, it may have errors. We will proceed from there after you have completed the scan. Best of luck.