Windows Support Forum

X1 Carbon 2016 (20FB) - Ultranav unresponsive for ...

Q: X1 Carbon 2016 (20FB) - Ultranav unresponsive for ...

Hello, I have this problem for month now :I close my X1 Carbon lid before going to bed, and in the morning, when I resume it from hibernation, the trackapd and trackpoint are totally unresponsive. Everything else work fine, I just have to wait, sometimes 20/30sec, sometimes a whole minute, to have the trackpad working. This is very frustrating to have a computer resuming so fast from hibernation but being unable to use it. I have the latest BIOS (1.15), latest UltraNav driver (19.0.17.98).Tried several drivers uninstallation/reinstallation, several fresh windows install, problem is still present. Actually on a fresh install of Windows 10 64bit (Anniversary update).

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-20FB-Ultranav-unresponsive-for-30sec-1Min-after/td-p/3386336
Relevancy 100%
Preferred Solution: X1 Carbon 2016 (20FB) - Ultranav unresponsive for ...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 80.6%

Hi all, I have have new X1 Carbon and really like it. However I am getting regular BSOD failures once or twice per week. I am running Win7 Enterprise SP1 and have all the lastest Lenovo urgent updates installed and most of the recommended and optional updates installed too. The BSOD have been of the following types:KMODE_EXCEPTION_NOT_HANDLED (1e) on June 28thMEMORY_MANAGEMENT (1a) on June 30thBAD_POOL_CALLER (c2) on July 6thMEMORY_MANAGEMENT (1a) on July 7thDRIVER_CORRUPTED_EXPOOL (c5) on July 21st At first I thought it was faulty RAM so I ran MemTest (http://hcidesign.com/memtest) for over night for two nights in a row and no issues were detected. Has anyone encouneted this issue and know how to fix it? Any recommnedations from Lenovo? If required I can attached detailed log dmps. Thanks,Ian

A:Frequent BSOD with 2016 X1 Carbon (20FB)

Look in the event log to see if a driver is throwing an error before the BSODs

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Frequent-BSOD-with-2016-X1-Carbon-20FB/td-p/3377470
Relevancy 80.6%

Hi, trying to get a Windows 7 Install done on a Carbon X1 2016 20FB w/ Samsung950 Pro. Bios 1.14 (latest as of May 2016)Special issue is, I need to get it done in a Legacy mode (BIOS,MFT style). I was able to install Win7 based on a win7 image that got the 950pro drivers and the USB3 drivers infused through NTLITE, and then I build an image with Rufus 2.9 (both UEFI/GPT and UEFI/MFT) worked, with the X1 BIOS was set up to UEFI only with CSM.BUT I need to to run on the BIOS setting 'Legacy' and in MFT style, b'cause the special Win7 installer I need to use does not support anything else. I know, sounds weird, but..... . So- is there a fundamental limitation against booting / installing a Win7 on a Carbon X1 2016 20FB - Samsung950 Pro in Legacy 7 MFT mode? 

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Carbon-X1-2016-20FB-Samsung950-Pro-Windows-7/td-p/3338627
Relevancy 110.51%

Hi all, I have the X1 Carbon 2016 (20FB) and it is running Windows 10 Enterprise. I have all the lastest Windows and Lenovo updates. It all works pretty well except when it comes to starting back from sleep mode. I have the laptop configured to go to sleep when I close the lid. However when I reopen the lid, the power button and keyboard lights come on but the display stays off. Opening and closing the several times doesn't help. The only way to get the display to turn on is to quickly press the power button. This puts the laptop to sleep. If I press the power button again the laptop comes back to life and the display works again. Anyone else have this issue? Any possible solutions? Thanks,Ian

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-20FB-display-doesn-t-work-after-opening-the-lid/td-p/3454282
Relevancy 110.51%

Hi, the power options sets that the display should turn off in X minutes. But it doesn't do it at all. Instead, the computer is locked and the display dimms.  I'm pretty sure that I have installed the latest monitor and graphic card driver. For testing it, I have also unplugged all USB devices.  What can still be the reason? Thanks!

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Thinkpad-X1-Carbon-2016-20FB-won-t-turn-off-display/td-p/3479770
Relevancy 110.51%

Just got my brand new X1 Carbon (4gen 2016/20FB) with the 512 GB PCIe NVMe SSD (THNSN5512GPU7). Was expecting a blazing fast disk, but it felt sluggish something that AS SSD Benchmark confirms (see attachment). According to the specs this drive should offer up to 2400 Mb/s read and 1500 Mb/s write. But I get 1800 MB/s read and abysmal 113 MB/s write. The machine has all the latest updates from Lenovo (incl BIOS) and all the drivers for Windows 10. Anyone else tested their drives? Found a Dell XPS owner with the same drive that complained about the same issue. Turning off windows write cache buffer flushing does help, but that is not a good answer.

























as-ssd-bench NVMe THNSN5512GP 08.08.2016 10.41.20.png ?31 KB

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-20FB-Very-slow-SSD-write-speeds/td-p/3389892
Relevancy 82.56%

Hi, i just bought X1 Carbon (20FB series) running on windows 10. there's a sim card slot, but when i insert the simcard it keep poping out from the port the question is, is this laptop really support sim card? and how do i know if it work when i can properly insert it?

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/x1-carbon-20FB-sim-card/td-p/3482102
Relevancy 81.7%

Hi, I've got an X1 Carbon 20FB (4th gen), and noticed it doesn't have Lenovo System Update on it, which I've found useful in the past. So I went to the Lenovo downloads site and found System Update, but it doesn't list the 20FB as one of the X1 Carbons it supports - it only goes up to 20BS, 20BT: http://support.lenovo.com/se/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-... (See the "Note for ThinkPad X1 Carbon users") Should I avoid downloading System Update then? I've not noticed anything that's not functioning, but I figured it makes sense to keep things up to date from a security and features point of view. Why is it not included by default? Thanks for any advice!

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/System-Update-on-X1-Carbon-20FB/td-p/3427436
Relevancy 81.7%

Hi, does anyone know if there is a list of compatible embedded LTE chips that will work on a X1 Carbon 20FB?  The reason why I ask this is bec the current model, EM7455, only operates at some frequencies that some abroad contries do not support and the older models such as the EM7355 support those frequencies.  One being GSM.  I tired to install a EM7355 into my 20FB laptop but the bios isn't allowing it. Thanks!

A:X1 Carbon 20FB Embedded LTE Compatibility

EM7455 is versatile enough and supports a lot of 4G/LTE including LTE-A and 3G bands worldwide. It does not support 2G (GPRS/EDGE) access technology.




__________________________________ThinkPad (1992 - 2012): R51, X31, X220, Tablet 8.Do you care about privacy and security ? Leave Google behind

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-Embedded-LTE-Compatibility/td-p/3399773
Relevancy 81.7%

Hi, I have x1 carbon 20FB and I have Synoptics WBDI bio scanner. Device is working fine when I try to use scanner to log in to the computer. I'm interested in ability of using the scanner to store other passwords from secured web sites utilizing the scanner. Is it possible? If so - what do I need? Thanks, Jakar55

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-Fingerprint-Scanner/td-p/3457424
Relevancy 81.7%

I recently got a X1 carbon 4th gen (20FB), and I have been super happy with its performance. However, it seems like whenever I have the laptop closed, the keyboard is leaving a mark on the screen. I sent it to repair, and they changed the screen, but that didn't seem to fix it. I noticed that the body and the lid are not perfectly aligned - one of the corners of the lid seems to be jutting out a little bit with respect to the rest of the body. I've attached picture to show this. I'm not sure if this is a part of the general design of the Carbon.  Can anyone with a X1 carbon 4th gen confirm that this alignment feature is not present in their machine? Thank you ? 

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-carbon-4th-gen-20FB-lid-and-body-alignment/td-p/3441108
Relevancy 81.7%

We've purchased about dozen th gen x carbons machine type fb and nbsp have been having some intermittent keyboard issues with multiple laptops nbsp At least different units have had problems where the keyboard doesn't seem to work at all nbsp After power on nbsp we press F F or Enter to try and access different functions but they have no effect nbsp Once windows loads we still can't type anything nbsp nbsp The first time my tech ran into this he nbsp rebooted a few times and was still experiencing the same issue he nbsp set the laptop nbsp aside for me to look at nbsp When I turned it on they keyboard was functioning normally nbsp Later after loading our image on the computer he was preparing to deploy it to a user when the keyboard stopped working again nbsp I fired up a new laptop this morning fresh out of the box and had the same issue a non-functional keyboard nbsp In this case at least the touchpoint touchpad didn't work either nbsp I rebooted tried to get into UEFI config and after a couple of more reboots I tried pxe booting but nothing I pressed on the keyboard seemed to help nbsp I turned the laptop off and put a note on it that it had a bad keyboard iss... 4th intermittent Carbon x1 gen keyboard (20FB) but when my tech came in and turned it on a couple of hours later they keyboard is working fine nbsp nbsp I've got one in front of me right now that was working this morning but now the touchpad point aren't responding nbsp Keyboard is working though nbsp nbsp Lastly we issued one x1 Carbon 4th gen (20FB) intermittent keyboard iss... of this model to a user recently and she has intermittently had the keyboard stop responding while she's in the middle of working on a document nbsp After a few minutes it might start working again nbsp nbsp These issues may or may not be related to each other but it's very x1 Carbon 4th gen (20FB) intermittent keyboard iss... odd behavior and we haven't quite been able to pin down the cause nbsp Anyone else seen something of this sort nbsp Any suggestions

A:x1 Carbon 4th gen (20FB) intermittent keyboard iss...

Hello all, We've got the same problem here with our x1 Carbon 4th gen (20FB). Lucky, we just purchased 2 but not 2 dozen. Both of them have the same problem which same as Swhitcher. We've called the Lenovo support hotline and ask for the onsite support. The on-site engineer replaced the mother board for us, but after 1 hour, problem occur again. We're going to deploy those computers to the end user very soon.So please, give us the solution as soon as you can, Lenovo!Many Thanks! Willi

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/x1-Carbon-4th-gen-20FB-intermittent-keyboard-issues/td-p/3375037
Relevancy 81.7%

Hi, We are having an issue with our X1 Carbon's(20FB). The audio output via an HDMI cable works, we see the Epson speakers in the playback devices. After the user is logged on for a while, the speakers will no longer showup in the playback devices and the auidio will just come through the laptops speakers. After we restart the computer, the audio will again work and play to the speakers. Windows 7 X64 Any help or thoughts on this is greatly appreciated.  Thanks,John

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-Audio-Issue/td-p/3464159
Relevancy 80.84%

I'm setting up a new X1 Carbon with machine type 20FB. It came with a Samsung MZNTY256HDHP SSD. I noted there was a recent SSD firmware update package for this laptop model, so I downloaded and ran the updater. It reported there were no updates. However, after digging a bit deeper, I discovered that the SSD firmware updater for the X1 Carbon 20A7/20A8/etc. DOES have an update for the SSD in this machine. What is going on here? Does this firmware update somehow only apply when the SSD is installed in a 20A7? Or did this particular model of SSD just get missed when Lenovo was putting together the firmware update package for the 20FB?

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Missing-SSD-firmware-update-for-X1-Carbon-20FB/td-p/3485035
Relevancy 80.84%

We've got about dozen of the th gen x carbons machine type FB and have had a high number of display related issues with them nbsp At the moment we have sitting upstairs waiting for UPS to pick up for shipment to lenovo service and one more on my desk that was Display X1 (20FB) flickering and/... issues -- Carbon just acting up nbsp I'm told that we have previously sent in at least another or laptops for similar issues nbsp I understand that those previous laptops had the displays replaced and that we have yet to see a recurrence of the issues in one that has been repaired nbsp The problems we've seen X1 Carbon (20FB) Display issues -- flickering and/... are intermittent and generally fall into one of two categories FlickeringVideo X1 Carbon (20FB) Display issues -- flickering and/... garbled missing sections or complete garbage nbsp The flickering is sometimes very faint barely noticable but other times it's more pronounced bad enough that users complain of X1 Carbon (20FB) Display issues -- flickering and/... headaches and or it's going to cause seizures nbsp The garbage video issue is what I just saw with the laptop sitting on my desk nbsp It went to sleep and when I woke it up this was what I saw nbsp After a few moments the laptop rebooted on it's own and the display was back to normal but I don't want to send this out with a user now just to get a support call when it nbsp happens again nbsp Is anyone else having this sort of issue nbsp Or did we just nbsp particularly unlucky nbsp

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-Display-issues-flickering-and-or-garbage-video/td-p/3400877
Relevancy 80.84%

Carbon X1 connected to OneLink+ with current firmware 2.30 OneLink+ dock is connected to 2 DisplayPort monitors and some USB devices 1. If the X1 display is closed the system hangs on starting Windows2. If I open the lid and re-power the system and start up windows. Once I can get the the Login screen, I can then close the lid and all is good. Both external dispay work fine 3. X1 boots fine when not attached to OneLnk+ Workaround - #2 is not a great option in the long term Any help would be appreciated Steve 

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-won-t-boot-unless-display-is-open-when-connected/td-p/3434429
Relevancy 80.84%

Hi There,
 
I am trying to image this laptop from wds and looks like i am getting below error:
 
"windows could not set a partition active on disk 0. The target disk, partition, or volume does not support the specified operation. The error occurred while applying the unattend asnwer file's <DiskConfiguration> setting. Error code: 0X80300024"
 
 Please see my attached answer file, not sure if that is somthing with this laptop model since even i try to go to it's pre installed windows, it just don't take me to windows.
 
Please advise!
 
Moderator note: serial number removed for member's protection.

























xml version.docx ?13 KB

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-Model-20FB-002RUS-and-S-N-R9-Please-help/td-p/3430494
Relevancy 80.84%

Hi There, I am trying to image this laptop from wds and looks like i am getting below error: "windows could not set a partition active on disk 0. The target disk, partition, or volume does not support the specified operation. The error occurred while applying the unattend asnwer file's <DiskConfiguration> setting. Error code: 0X80300024"  Please see my attached answer file, not sure if that is somthing with this laptop model since even i try to go to it's pre installed windows, it just don't take me to windows. Please advise!

























xml version.docx ?13 KB

https://forums.lenovo.com/t5/Lenovo-C-E-K-M-N-and-V-Series/Lenovo-X1-Carbon-Model-20FB-002RUS-and-S-N-R9-0l5uQR-Please-help/td-p/3430494
Relevancy 80.84%

I recently reinstalled my windows 10 system and then can not find my wireless card. In the Device Manager, there is two hardware without drivers. 1) Network controller; 2) PCI simple Communications Controller.I went to the Lenovo support page and find out I need to install Huawei Huawei ME906s Wireless WAN Firmware Updater for Windows 10 and 8.1 - ThinkPad. However, I can not install this. It showed "Error code 10: Find port failed" Did I install a correct version. Or what kind of drivers I need to install for my wireless card. My model is :X1 carbon 20FBSystem: Windows 10 Thank you very much!

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-CAN-NOT-install-wireless-drivers/td-p/3479332
Relevancy 79.98%

Hi, I updated my X1 Carbon 4th gen to 1.17 BIOS, and since then, opening the lid won't wake the computer from hibernation, except when plugged.Bios changelog states Disabled the power button when the computer is in battery mode and the
computer lid is closedbut when I read "power button", I don't think "this is gonna break the behavior of the lid". And of course, no rollback is possible from 1.17, so I'm stuck with a computer wich won't wake from hibernation correctly. I just can advise you all to not upgrade bios, and see what's inside the next version...

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-20FB-1-17-BIOS-broke-wake-from-hibernation-by-opening/td-p/3412880
Relevancy 79.98%

Hello! I have made many driver pachages and image loads of lenovo pc, but i cant figure this one out. I think I have spent 4 hours of researching and I have realised I need to put down my pride. I need help. Using:Sccm 2007.WinPe 3.1 I'm using the Onelink+ pro usb to RJ45 adapter to get ethernet. It says it supports PXE. We use winpe 3.1 and want to deploy Win7.I have added all the drivers from Lenovo sccm pachage. I have turned "only legacy" in the bios. I have added the USB3 Exstension driver to both the image and WinPE. I get to download the Winpe and start it up. It have an IP and shows activity untill it start Winpe and check connectivity. It show error, but simply just reboot. When i f8 and type ipconfig /all it shows nothing. Please help me.  

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-model-20FB-Deployment-issues-PC-restart-after-loading/td-p/3351416
Relevancy 67.94%

X1 Carbon Gen 4 (2016) GPS Is available with optional Wireless WAN Integrated Mobile Broadband 4G LTE (Huawei ME906S) which according to Huawei?s specs has GPS built-in. No mention of GPS capabilities in Lenovo?s specs for X1 Carbon Gen 4 (2016), so can anyone comment about experience? Does GPS work in X1 Carbon Gen 4 (2016)? X220 has Lenovo GPS Enabler ? anything similar in X1 Carbon Gen 4 (2016)?

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Gen-4-2016-GPS/td-p/3342538
Relevancy 67.08%

Hello everyone, At last time I can remember, my X1 carbon turn the AC led (charging led, near AC port in the notebook's left-side) from orange (when charging) to green and then turn it off when my battery is full charged. But now, it's always on (green color)(plugged in but not charging because I use threshold setting) Please tell me it's normal or not?

https://forums.lenovo.com/t5/ThinkPad-X-Series-Tablet-and/X1-carbon-2016-The-AC-led-does-not-turning-off-when-full-charge/td-p/3419846
Relevancy 67.08%

I was just reading the User Manual for a new X1 Carbon that will be delivered next week.  It includes this advice under General Tips for Preventing Problems: - "Use disk defragment tool regularly on your solid-state drive to improve data seek and read times." (p. 91 [pdf p. 107] https://download.lenovo.com/pccbbs/mobiles_pdf/x1carbon_mt20fb-20fc_x1yoga_ug_en.pdf?linkTrack=PSPro...) Is this supposed to read "non-solid-state drive", or am I misinformed about when to use defrag? 

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-Defrag-SSD-Can-this-be-right/td-p/3432162
Relevancy 67.08%

Hello everyone, At last time I can remember, my X1 carbon turn the AC led (charging led, near AC port in the notebook's left-side) from orange (when charging) to green and then turn it off when my battery is full charged. But now, it's always on (green color)(plugged in but not charging because I use threshold setting) Please tell me it's normal or not?

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-carbon-2016-The-AC-led-does-not-turning-off-when-full-charge/td-p/3419846
Relevancy 67.08%

Hello,I am using X1 Carbon 2016 with OneLink+ and 27 inch 4K Dell monitor. It works all right with 60Hz.I would like to know, if it is possible to connect two 4K 60Hz monitors to the system?I understand, that OneLink+ supports two 4K monitors only with 30Hz and this is out of question. I need 60Hz on both of them. So, can I connect one through OneLink+ and another to MiniDP on notebook itself? Theoretically, it seems OK, because Intel HD 520 graphics itself supports two 4K 60Hz monitors and OneLink+ 30Hz limitation is related to speed only (if I am right). Would be grateful for any advice. Thank you.

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-with-two-4K-monitors/td-p/3344865
Relevancy 67.08%

Hi All I have just updated the Bios on my 2016 Lenovo X1 Carbon and now the splash screen which normally shows Lenovo in all black with white text has now got a RED box around the Lenovo text. Anyone else have this? Type: 20FB-003TUK (6th Gen) Regards Stu

A:Lenovo X1 Carbon 2016

Yeah, it change with a new logo.u can check the change log (New) Updated the logo screen at start up.support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-X-Series-laptops/ThinkPad-X1-Carbon-... I'm a ThinkPad fans, and a Chinese Lenovo employee. My English is not good. That's all.

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-2016/td-p/3323665
Relevancy 66.65%

I just received my x1 carbon, just a day before relocating to Spain. I didn't have time to check it out thoroughly before I left, but everything seemed fine. When trying it out upon arrival I imediately noticed a rattling sound from the touchpad. Just tapping the touchpad lightly produces noise, not to mention doubble tapping which is aweful. The touchpad seems to be centered and in level with the rest, but doesn't appear to be screwed on properly. A lenovo store here in Madrid only had the cheaper models, but the touchpads on these where all firm like a macbook. I'm a little hesitant about calling the spanish lenovo service as my spanish is severily limited atm. Has enyone else experienced this? Thanks.

A:X1 Carbon 2016 Noisy touchpad

A similar problem is being discussed in relation to the X1 Yoga (click), which is pretty much the same hardware as the X1 Carbon Gen 4.

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-Noisy-touchpad/td-p/3420936
Relevancy 66.65%

nbsp I recently picked up an X Carbon with a WQHD screen while travelling in the US nbsp On first boot I noticed a column of dead pixels and promptly put in a service ticket for the issue nbsp As with my previous Lenovos I buy the yr NBD Onsite service nbsp Anyhow the LCD was backordered and after a week Carbon woes X1 (Gen replacement LCD 2016 4) - yesterday the screen was replaced nbsp Here is where the problem starts nbsp The original screen in the machine was LP QH -SPF nbsp The replacement screen installed is LP QH -SPF nbsp Both screens carry the same Lenovo part number HN but they are drastically different in quality nbsp The original screen was paper white and very bright where I X1 Carbon 2016 (Gen 4) - LCD replacement woes was using it indoors at and in my vehicle at full brightness without issue nbsp The replacement has whites that are yellowish X1 Carbon 2016 (Gen 4) - LCD replacement woes and when at full brightness it is not as bright at the original screen was at nbsp It is very dim and difficult to use outdoors nbsp I have spent over k CAD for this ultrabook and I am not happy about the difference in replacement screen model nbsp Is there a way I can get the correct screen back in my machine nbsp nbsp nbsp

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-Gen-4-LCD-replacement-woes/td-p/3421087
Relevancy 66.65%

I've been trying to find a solid review on the internet Yoga 2016 vs X1 X1 Carbon anywhere review ? comparing these two X systems head to head but no luck so far nbsp The touchscreen and stylus capabilities of the X Yoga are nice but not absolutely necessary I'm worried if the build quality and reliability nbsp matches that of the X Carbon X Yoga has more moving parts raising keyboard platform more mobility in hinges laptop mode changes reliability touchscreen reliability etc in light of ongoing Lenovo quality control issues 2016 X1 Carbon vs X1 Yoga review anywhere ? Not that the X Carbon is without issues of its own nbsp If the touch and pen capabilities are a nice to have feature for someone and not required are they more trouble then they're worth given quality issues Or are the concerns overblown nbsp Would also like to know 2016 X1 Carbon vs X1 Yoga review anywhere ? if the QHD screens used in both systems are identical in terms of brightness color accuracy and viewing angles Same screen manufacturer Do both keyboards have the same key travel and quality of feel while typing nbsp Would be great if there was a review comparing both directly Has anyone had hands-on experience with both nbsp Thanks - Paul

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/2016-X1-Carbon-vs-X1-Yoga-review-anywhere/td-p/3326004
Relevancy 66.65%

Hello, I have a new notebook, it's a thinkpad X1 carbon Gen 4 (X1 carbon 2016)I don't know how to use fingerprint to turn on my notebook, last time I have a Thinkpad T420, when it's fully power off, I just swipe fingerprint to turn it on. I realy like this funtion, please help me bring it on my new thinkpad.Thank you

A:X1 carbon Gen 4 2016 - How to power on with finger...

Good day and welcome to the community.
 
To my knowledge, that capability is no longer available, and I don't believe it will be returning.
 
Regards.

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-carbon-Gen-4-2016-How-to-power-on-with-fingerprint/td-p/3366787
Relevancy 66.65%

Hi all, iam getting crazy with my X1 Carbon 4th Gen. I have problems to install Windows 7 64Bit Enterprise from USB or DVD, i tried both. It still appear the message of missing CD/DVD Drivers. I guess it's a USB 3.0 Driver Problem Thing's i've already tried: - I restored BIOS Settings. I disabled Win8 Compatibility Mode. Boot Options from Legancy to UEFI and back..- Deploy Windows 7 on USB Device 3.0 and 2.0 with Windows7USB/DVDTool- Deploy Windows 7 on DVD- I tried all combinations with the Onlink+ Dockingstation and USB 2.0 Port....- With all combinations i tried to load the USB3.0 drivers and AHCI/Chipset Drivers in the setup menu- I reimaged Windows 7 with the Microsoft Toolkit and add a Hotfix for USB, USB Drivers....nothing My Device:Lenovo X1 Carbon 4th Gen. (2016) (Type 20FB, 20FC)Intel Core i7-6500U Processor (2.50GHz)8.0GB RAM256GB SSD SATA Please help me... :-(

Relevancy 66.65%

Dear all,I recently got a new carbon X1 2016 version and I would like to connect it to my display at work (samsung U24E590, 4K) and my TV at home (Panasonic, 4K). As especially my TV doesn't have a display port, I would like to connect over HDMI. In the manual, it says that HDMI connection allows resolutions up to 4096x2160px. However, when I connect my Samsung display, I get only options up to 1920x1080px in display settings (win 10, x64). I downloaded and installed the newest Intel HD Graphics 520 driver from the Lenovo support page. How is it possible to use full 4K resolution over HDMI connection? Anybody an idea? If possible without any expensive adapters etc. Many thanks for your help!

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/4k-resolution-over-HDMI-with-carbon-X1-2016/td-p/3309982
Relevancy 66.65%

Again, not sure why Lenovo is so hard headed? Resuing to listen to what the MAJORITY of people want. * No OLED displays? How long do we have to wait for this? 2020? * SD Mini slot in the back? Very inconvient. No one is going to use it. (regular SD card on the side works better).* CTRL and FN button still in the wrong location. Why again do we have to fix it in bios when Lenovo can easily make it right? No SD card on my 2015 is the most annoying thing ever. Yes I have a stupid USB SD reader but c'mon. What's the point of thin and light if we have to carry a bunch of add-ons. Especially when the SD card slot doesn't even take up any space. Stupid move. Lenovo is losing sales and customers and it's due to them being out of touch with consumers.   

A:The 2016 X1 Carbon was a flop. When will the 2017 ...

The 2016 X1 Carbon was a flop for Lenovo? I doubt that. I think it sells very well for Lenovo. You say the majority of people want an SD card reader? Many mobile systems donīt have one anymore, and they still sell. This is a niche requirement, and Lenovo, who is a company with a wide lineup, has other models to fullfill that need. Aka the ThinkPad T460s, which is dimension and weight wise almost exactly the same as your X1 Carbon 2015, but with an SD Card reader, Ethernet, upgradeable RAM etc. 

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/The-2016-X1-Carbon-was-a-flop-When-will-the-2017-be-released/td-p/3342977
Relevancy 66.65%

I noticed since day one that this new computer's trackpad has been acting slowly on taps. I tried to find solutions but can't. Then finally I found out 'disable edge tap filter' resolves the problem. After uncheck this feature, any mouse tap provides immediate response.

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-tap-slow-response/td-p/3385502
Relevancy 65.79%

I have a brand new x carbon type FB All seems to work fine apart from when I use an external moniter of any kind nbsp it always seems to display at a poor quality on the external screen with nbsp the laptop nbsp display staying at nbsp a high standard The resolution nbsp is set high enough to give a good clarity currently using x on company monitor but the image is pixalated and the contrast is weak nbsp nbsp I have tried using HDMI monitors VGA monitor TV projectors through the HDMI outputs and the onelink docking station played with every setting Poor Gen X1 video on carbon 2016 4th output I can find tried using an external screen only and switch the laptop screen off but nothing seems to generate a good image I would suspect that it was just me as most things seem to be but we recieved three of these laptops at the same time and all have the same issue Does anyone have a solution or is the nbsp intel HD graphic card just not up to scratch

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Poor-video-output-on-X1-carbon-4th-Gen-2016/td-p/3314885
Relevancy 65.79%

Hello, Can I buy a WWAN card (like Qualcomm Snapdragon X7 LTE-A (Sierra Wireless EM7455) to add to my note book (x1 carbon 2016)? Thank you

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/How-to-upgrade-WWAN-card-to-x1-carbon-2016/td-p/3423481
Relevancy 65.79%

Hello, Can I buy a WWAN card (like Qualcomm Snapdragon X7 LTE-A (Sierra Wireless EM7455) to add to my note book (x1 carbon 2016)? Thank you

https://forums.lenovo.com/t5/ThinkPad-X-Series-Tablet-and/How-to-upgrade-WWAN-card-to-x1-carbon-2016/td-p/3423481
Relevancy 65.79%

Hi All
 
i'm trying to turn on TPM via a task sequence set whilst building the machine via SCCM 2012
 
I have included the following cmd as a step in the task sequence:
 
cscript.exe SetConfig.vbs SecurityChip Active
 
then use a 2nd step in the task sequence to enable  bit locker encryption and use TPM.
 
Now step 2 works fine as we have used this on our previous HP laptops, but it will not work on the lenovo's Am i missing something in the first step of the task sequence?
 
Regards
 
Stewart
 
 
Moderator comment: Detail added to subject for clarity. Model clarified per previous posts.

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-Gen6-TPM/td-p/3331522
Relevancy 65.79%

Hi, I just bought an second hand X1C4 (in Germany). The serial number is written in the BIOS (there is no label on the back). However this SN can neither be validated in the warranty database, nor be found in the product support site. I don't think that I can return it now.In which case this can happen? Is it possible that this SN is somehow wrongly flashed into the BIOS or can it be that this particular laptop is some kind of "illegal" article? Thanks! 

A:ThinkPad X1 Carbon 2016 Serial Number cannot be va...

Hi, I don't know if this applies to you.  I had a motherboard replacement on a IBM A30p and a W510 Thinkpad.  Both times after motherboard replacement I had problems with warranty validation.  On both of my cases after board replacement they put in the wrong serial number by putting in the letter "O" vs the number "0".  Since i still had the label and my purchase receipt i did not resend it in to IBM to fix the BIOS serial number.  Again i dont know if this applies to you.

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/ThinkPad-X1-Carbon-2016-Serial-Number-cannot-be-validated/td-p/3473606
Relevancy 65.79%

Hi all I would like to share my recent experience of nbsp Thinkpad X carbon th screen brightness problem and how this problem been solved nbsp The laptop cames good and the screen brightness carbon ca... Thinkpad 2016) X1 (4th F and F function for screen brightness adjusting is OK nbsp Other methods like in the setting menu and battery menu nbsp to adjust the brightness are all OK After one hour or one day or some short time you will find you cannot adjust the brightness Even the battery amp power options are not working nbsp The problem Thinkpad X1 carbon (4th 2016) screen brightness ca... comes from the driver First I thought it is the problem of driver of monitor wide viewing angle high density flexview display x driver I uninstall update change but none of them work Finally I find it is the problem of nbsp intel hd graphics There is another nbsp evidence that during the time only this driver of nbsp intel hd graphics has been updated automaticly to the latest version So I uninstall and roll back to the version nbsp and Thinkpad X1 carbon (4th 2016) screen brightness ca... the problem is solved I did Thinkpad X1 carbon (4th 2016) screen brightness ca... not check the lates version of this driver But I am sure that the latest version of intel hd graphics has conflict with the lenovo driver for screen brightness nbsp I am sure there are other people face the same problem after the update of nbsp hd graphics driver nbsp Any engineer please check it nbsp nbsp

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Thinkpad-X1-carbon-4th-2016-screen-brightness-cannot-adjust/td-p/3347977
Relevancy 65.79%

Hi All So im looking to build my new X1 carbon with Windows 10 Enterprise 64bit, i have the iso on a bootable USB pen, but i cannot get the system to boot from the usb with secure boot on. I would like to take advantage of the UEFI boot, i can turn off the secure boot and it will build as normal, but after installing all the drivers, i put UEFI secure back on and it wont do anything. Am i missing something here? Regards Stu 

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Carbon-2016-Windows-10-Build/td-p/3323674
Relevancy 65.79%

Hi there, Today my X1 Carbon 2016 suddenly refused to come out of sleep mode. After a reboot, it refuses to go any further than the boot splash screen. I can enter the BIOS setup screen (F1) and do changes there, but booting anything results in a reboot, including e.g. PXE (never makes it to the actual PXE boot, reboots before that) or even the Lenovo Diagnostics tool (also reboot before making it to the tool). I tried doing a hard reset through the reset button at the bottom of the laptop but it didn't seem to help. Is this a known problem? Should I just get a motherboard swap? I'm a bit disappointed since I've owned the laptop for less than 4 months now... Cheers,

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-stuck-in-a-reboot-loop/td-p/3362440
Relevancy 65.79%

Hi all, I have just recevied a shiny new ThinkPad X1 4th generation. It is model number 20FBCTO1WW and it is running BIOS v1.14. I am using it in conjunction with the OneLink+ dock (model DU9047S1) which is running driver v1.10.10. They work fine together except when I reboot the X1 as it fails to reboot and just hangs after the Lenovo splash screen. The loading of Windows 7 doesn't even seem to start. I know there were similar issues a few years back with earlier versions of the X1 but I have not heard any issues with the 4th gen model. Here is the issue from older versions of the X1: https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2-OneLink-unable-to-use-Ethernet-po... Does anyone else have this issue? Is there a proper resolution. Thanks,Ian

A:X1 carbon (4th gen 2016) doesn't reboot when conne...

We've seen the same issue. Our cause was older USB devices were plugged into the dock. One user had an old keyboard.  The other user had an old optical mouse. Replaced devices with new items and it boots just fine.  Thanks,Kyle. 

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-carbon-4th-gen-2016-doesn-t-reboot-when-connected-to-OneLink/td-p/3360609
Relevancy 65.79%

Hi Guys nbsp I am a former X owner whom ventured back to Thinkpad and bought a X Carbon G GB 10 Thinkpad 2016) (X1 software Windows Carbon i GB LTE FHD and I must say Windows 10 Thinkpad software (X1 Carbon 2016) first impression is really good It feels like a better X in terms of hardware keyboard and so forth - not to mention the screen is leagues above the old X despite me choosing Windows 10 Thinkpad software (X1 Carbon 2016) FHD over WQHD nbsp So fundementals of the purchase are ticking all hardware boxes nbsp However here is the let down - My laptop arrives with Win Pro with all the bells and whistles of an X model The shortcut brings up all the tools and it just feels like home when I had X Win was in its prime - Then I upgrade to windows and there is mostly just a standard windows nbsp It doesnt feel much thinkpad like in windows nbsp Have I completly missed the upgrade how-to or is lenovo not providing same look and feed in both Win and Win nbsp SImple example - the classic battery gauge in toolbar which i found some substandard lenovo remake of 'lenovo battery gauge' which didnt show hours left nbsp I had to go and get the third party batterybar to do the job nbsp Further the shortcuts that normally would give me Accesss Connections and show me the Watt usage of my Thinkpad are nolonger existing and it gives me the windows settings instead nbsp Im a happy X owner but had I known the thinkpad came with Win and mediocre Win features after upgrade I would probably have bought a macbook or similar which offeres no integrations but drivers and would leave me with more in my pocket nbsp So the short questions is - Does anyone have an idiots guide to Windows on X series All I did was to install every driver listed in support plus companion and settings from App Store but still feels very little like lenovo integration - Any hints on where to start or is 'this it ' nbsp nbsp nbsp nbsp nbsp

https://forums.lenovo.com/t5/ThinkPad-X-Series-Tablet-and/Windows-10-Thinkpad-software-X1-Carbon-2016/td-p/3373131
Relevancy 65.79%

Hi all, I have just recevied a shiny new ThinkPad X1 4th generation. It is model number 20FBCTO1WW and it is running BIOS v1.14. I am using it in conjunction with the OneLink+ dock (model DU9047S1) which is running driver v1.10.10. They work fine together except when I reboot the X1 as it fails to reboot and just hangs after the Lenovo splash screen. The loading of Windows 7 doesn't even seem to start. I know there were similar issues a few years back with earlier versions of the X1 but I have not heard any issues with the 4th gen model. Here is the issue from older versions of the X1: https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2-OneLink-unable-to-use-Ethernet-po... Does anyone else have this issue? Is there a proper resolution. Thanks,Ian

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Thinkpad-X1-carbon-4th-gen-2016-doesn-t-reboot-when-connected-to/td-p/3360609
Relevancy 65.79%

My serial numer for the x carbon th gen is xxxxxxxxxxxx nbsp I fan (2016) noise carbon unbearble gen makes... 4th x1 spent nbsp custimizing the x carbon th gen with TB PCI-e SSD I thought I would got a laptop for me to use years as I had a W used for years with problems and very quite nbsp but it is too x1 carbon 4th gen (2016) unbearble fan noise makes... heavy to carry it around nbsp However as soon as I started this new laptop the fan noise pissed me off The noise is totally unacceptable becuase I didn't x1 carbon 4th gen (2016) unbearble fan noise makes... start any programs yet and it runs a fresh Win Pro OS the noise can be heard about nbsp ft away in my bed room I tried to restart for a few times the noise comes back about seconds after the system is reboot nbsp nbsp nbsp I did some googling and found this old post for x carbon st gen nbsp https forums lenovo com t ThinkPad-X-Series-Laptops x -fan-Noise td-p page nbsp I read the entire post and I assume this is probably the Bios issue again hopefully not the design issue since this is the th gen Can anyone from Levono help me geck this issue and provide nbsp me a solution I really hate to send the laptop back and exchange a laptop probably with the same issue if this is a Bios problem nbsp Cheers nbsp nbsp Mod edit nbsp Removed Serial Number to prevent abuse nbsp nbsp

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/x1-carbon-4th-gen-2016-unbearble-fan-noise-makes-it-unusable/td-p/3321737
Relevancy 64.93%

Hello I have issue on my x1 carbon 2016 (win10).When dark color thing is displayed then screen brightness is dimmed.When bright color thing is displayed then screen brightness is brighter. So I think this is "Dynamic Brightness" or "Adaptive Brightness" feature.But in fact, those setting are disabled (off) but still brightness is changed automatically. I already upgraded all drivers but still same. Anyone has similar issue? Please advise. Thanks

























ScreenHunter_18 Nov. 03 14.19.jpg ?156 KB

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-2016-Dimmed-display-even-dynamic-brightness-adaptive/td-p/3471943
Relevancy 64.5%

This morning my X1 carbon Touch Screen stopped working for no apparent reason. Everything that I can see is updated.  Lenovo Chat has been a pain. Anyone have any idea how to fix this?

A:2016 X1 carbon Touch Screen Stopped working abrupt...

Are you saying the machine won't start, or that the touch function doesn't work?

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/2016-X1-carbon-Touch-Screen-Stopped-working-abruptly-Need-Fix/td-p/3350014
Relevancy 58.91%

I'm going to buy a new license of one of these product, so any suggest please?
I have used Bitdefender, Avast, Kaspersky ( about 3 years ago), I haven't used Norton and Trend Micro.
 

A:KIS 2016 vs NIS 2016 vs BIS 2016 vs Avast IS 2016 vs Trend Micro IS 2016

Out of all these,and your prerequisites,I would go with Kaspersky!
PS:This is from personal experience,and other members may have varying opinions!!
 

https://malwaretips.com/threads/kis-2016-vs-nis-2016-vs-bis-2016-vs-avast-is-2016-vs-trend-micro-is-2016.56405/
Relevancy 55.9%

Now! ESET has just released their newest security suite: ESET Smart Security 9 (2016 Edition). These products are on the top of security suites which are produced by giants on security companies. Most of them released 2016 editions of their products. I want to compare on their newest products with new features (such as on ESET: Banking Protection, Bitdefender: Ransomware Protection and new Firewall, etc...) and some enhanced features.

And now, which is your choose for your security? Please let me know your opinion!
 

A:Battle: Kaspersky IS 2016 vs ESET Smart Security 2016 vs Bitdefender IS 2016 vs Emsisoft IS 10

its hard choice choose between Eset,Kaspersky and Emsisoft.
in fact i never test Eset 2016, but i tested kaspersky and Emsisoft, Kaspersky 2016 really go lighter than Emsisoft(now i am Emsisoft useres)
by your budget and your interest u can choose Emsisoft or kaspersky.
 

https://malwaretips.com/threads/battle-kaspersky-is-2016-vs-eset-smart-security-2016-vs-bitdefender-is-2016-vs-emsisoft-is-10.52135/
Relevancy 52.03%

I have 6 months trial license all of them. Which one do you recommend?

Thank you in advance.

Best regards.

Heyye.
 

A:Avast IS 2016 / Panda IS 2016 / Bitdefender IS 2016

What kind of system do you have?
Panda and Avast are the lightest while Bitdefender can be heavy.

All 3 offer excellent protection (Avast requires tweaking; Bitdefender and Panda works out of the box), while Bitdefender is mainly known for its detection rate (signatures).

Try the 3 of them (trial versions, not the 6 months) and see which one you prefer.

In terms of UI, all 3 are user friendly.

Have a look here for Avast and Bitdefender info:
KIS 2016 vs NIS 2016 vs BIS 2016 vs Avast IS 2016 vs Trend Micro IS 2016
 

https://malwaretips.com/threads/avast-is-2016-panda-is-2016-bitdefender-is-2016.56959/
Relevancy 49.45%

Does anyone know how to get the ultranav trackpoint tap to select working on a thinkpad? (T42p W7 Pro) Mostly all else working.

A:thinkpad ultranav tap to select

Do you have the latest driver downloaded and installed from the Lenovo site?

What is the version and source of your current driver?

http://www.sevenforums.com/hardware-devices/36158-thinkpad-ultranav-tap-select.html
Relevancy 49.45%

I have an IBM T40 laptop. I have been having problems with the mouse properties. I opened up the advanced properties for the mouse and selected the UltraNav tab. I keep selecting the "Standard Scroll" option but it never stays. It keeps doing the smooth scrolling. For some reason, after my laptop has been on for a while, I can get the standard scroll option to stay. But then after a while longer it reverts back by itself. It usually happens when something disrupts my wireless internet connection. I have downloaded all the latest drivers that I could find from the IBM website. What is messing this up?
 

https://forums.techguy.org/threads/ultranav-trackpoint-problems.367836/
Relevancy 48.59%

I want to uninstall Synaptics ThinkPad UltraNav Drivers and files and registry t440p windows 10.Does anyone has al the instructions. The way from the controlpanel does not work....

https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/I-want-to-uninstall-Synaptics-ThinkPad-UltraNav-Drivers-and/td-p/3441643
Relevancy 48.16%

FYI,
 
The URL below states that the driver being installed is 19.3.4.17
 
http://support.lenovo.com/us/en/products/Laptops-and-netbooks/ThinkPad-P-Series-laptops/ThinkPad-P70...
 
However, the actual driver which is installed by the package is: 19.3.4.37! This is not the first time where the package description(s) are inconsistent with the contents.
 
 

https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/Synaptics-UltraNav-Driver-level-inconsistency/td-p/3460949
Relevancy 48.16%

Hello there, I have an issue with UltraNav TrackPoint while trying to scroll using the middle button. It seems Windows 10 are ignoring the middle button completely. Iīve tryied the solution I found here with the registry, but with no luck. I  remember the scrolling worked only for like two days after I purchased this repassed X230 tablet. After all the automatic Windows updates it stopped working. I tried uninstalling the driver and downloading fresh lenovo new one, but nothing... can someone here please help me? This issue is really annoying, otherwise I love the X230 tablet!

https://forums.lenovo.com/t5/ThinkPad-X-Series-Tablet-and/X230-Ultranav-Trackpoint-not-scrolling-with-middle-button-on/td-p/3397397
Relevancy 48.16%

I just upgraded my T BIOS to I don't recall the exact previous version number but I believe it was in the 's nbsp Since I've done this two things have happened the trackpad no longer works and the Trackpoint is now very laggy slow jumpy it looks problems. have now bios, Upgraded T410 Ultranav like it only updates about twice a second Here's a video of what it's doing nbsp https www youtube com watch v YzHL ZI TcM nbsp I'm using Windows here in this video Upgraded T410 bios, now have Ultranav problems. The CPU load shown in Task Manager is very low indicating it's not the computer itself lagging Secondly if I boot the Windows install CD or an Ubuntu LiveCD the same problem is happening indicating that it's an issue with the laptop BIOS itself not with Windows nbsp So far I've tried nbsp - removing the battery unplugging the laptop- disabling the trackpad trackpoint in the BIOS booting Windows re-enabling it nbsp I found this while Upgraded T410 bios, now have Ultranav problems. searching on here for the same problem Though it's a different laptop BIOS maybe it's the same bug nbsp https forums lenovo com t ThinkPad-P-and-W-Series-Mobile UltraNav-Trackpad-stops-working-after-ne nbsp Anyway the onboard Ultranav is now pretty much unusable on this laptop and I'm now stuck using an external mouse any help would be greatly appreciated Thanks

A:Upgraded T410 bios, now have Ultranav problems.

Also, I attempted to file a support ticket except the Lenovo website is doing this. http://i.imgur.com/kNyUMcl.png

https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Upgraded-T410-bios-now-have-Ultranav-problems/td-p/3318055
Relevancy 48.16%

Lenovo Ultranav stoped working wen installed windows 10. SolutionsPleaseInstalation of Synaptics ThinkPad UltraNav Driver ThinkPad T440p under Windows 10, failed!!

https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/can-not-install-Synaptics-ThinkPad-UltraNav-Driver-ThinkPad/td-p/3441102
Relevancy 48.16%

I'm using the ultranav middle button to scroll I live for this feature which is why I've been buying thinkpads since time immemorial However on the t nbsp scolling with the middle button nubbin is painfully slow in Word and Adobe Acrobat Reader is a T460 issues and with trackpoint ultranav... scrolling nightmare In Word its just slow and you have to use a lot of pressure on the nubbin there appears to be no setting to change this In Acrobat it's agonizingly slow in both Reader and Pro and will stick on if you try to go to fast and just scrolling for multiple seconds after T460 scrolling issues with trackpoint and ultranav... you release the button nbsp nbsp Stragely the trackpad T460 scrolling issues with trackpoint and ultranav... scrolling works fine in Word though it is still bad in Acrobat nbsp nbsp In addition the middle button scrolling will frequently slip and stop scrolling sending the pointer to the bottom of the page nbsp nbsp Nubbin middle button scrolling works oddly extremely well in Microsoft Edge nbsp Please help Middle button scrollig with the nubbin is the best feature on these machines nbsp nbsp Using T Windows -bit with the latest drivers nbsp

https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T460-scrolling-issues-with-trackpoint-and-ultranav-middle-button/td-p/3310095
Relevancy 48.16%

I am running a ThinkPad L530 in a Windows 10 environment.  All drivers are up to date.
 
Ever since I installed Windows 10, whenever the laptop awakens from sleepmode or is rebooted, the touchpad becomes enabled.  I have gone into the Settings - Devices - Mouse & touchpad - additional mouse options - Ultranav and unchecked the "Enable TouchPad" and clicked Apply, then OK.  This doesn't hold, though.  As soon as it awakens, the box becomes checked and I have to redo the settings.  I don't want the touchpad active at all, but I do occasionally need the eraser button.  How do I make my selection stick?
 
 
Moderator comment: Model added to subject for clarity.

A:L530 - Elan Ultranav Touchpad always enabled

Hi Greg,
 
Welcome to Lenovo Forums.
 
Please these links for better understanding.
Click here
Click here
 
Please let me know your findings.
 
Regards,
Shashi
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

https://forums.lenovo.com/t5/ThinkPad-L-R-and-SL-series/L530-Elan-Ultranav-Touchpad-always-enabled/td-p/3283343
Relevancy 48.16%

Hi I am a new owner of a Lonovo ThinkPad with Windows and I am having trouble with the settings I am a lefty so when I first configured the laptop I changed the mouse settings so that they are reversed This worked fine But I also wanted a real mouse mouse connected settings UltraNav Changing a is while so I got a Microsoft wireless mouse USB Now I mouse right handed since I Changing UltraNav settings while a mouse is connected am more used to it so while the Changing UltraNav settings while a mouse is connected IntelliPoint software was installing I changed the mouse settings back to default I figured I would just go and change the settings whenever I didn't want to use the mouse But when the software finished installing I found that the Control Panel Mouse window changed Now even when the mouse is unplugged the place where I had been able to change the button settings is a new window that is specific for this mouse Plus these changes don't affect the UltraNav so those buttons are still set for right-handed How do I change the UltraNav button settings

A:Changing UltraNav settings while a mouse is connected

Hello thebookster, and welcome to the forum.

I think you will have to uninstall the new mouse to get your old settings back. Should this work and you set up your Ultranav for a left handed person the Ultranav settings may still not work on reinstalling the new mouse. but it is worth a try.

http://www.sevenforums.com/hardware-devices/167177-changing-ultranav-settings-while-mouse-connected.html
Relevancy 48.16%

Hi all, The latest version of the touchpad driver for the T440 disables my trackpoint and removes the option to re-enable it from the Mouse Properties menu. Has anyone else had this issue? I'm on Windows 7 and the original driver on my computer is v18.0.7.40, for reference. Removing and re-installing the new driver did not fix the issue. I'd like to keep the new driver installed (due to behavior issues from my touchpad on the old driver), but lack of trackpoint functionality is a dealbreaker for me. Thanks in advance.

https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T440-UltraNav-driver-version-18-0-7-109-breaks-the-Trackpoint-on/td-p/3440930
Relevancy 47.73%

Hi, So I have all the latest updated driver on my T460s.If I uninstall all drivers for the touchpad, everything boots up (or comes back from hibernatio) without issues. Of course without synaptics drivers, I have no features like scrolling. When I install the latest drivers, I start getting isssues.After a boot or coming back from hibernation, it can take up to 5 minutes to get a working touchpad. Once I wait and it starts, then it is ok. Windows 10, 64bits.

https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T460s-Ultranav-Drivers-takes-minutes-to-start/td-p/3324499
Relevancy 47.73%

Hello,I am the owner of a new Lenovo X260 laptop and it is a beautiful computer (although I MUCH prefer the size of the keyboard of my old X220 and X230).   Anyway, I am having a huge issue where when I use the ultranav middle button to scroll, Cortana pops up. I have tried everything to disable this, and looked and seen others are having this issue. Is there any way to solve this?  It is extremely annoying.  My driver version is Synaptics Pointing Device Version 19.0.17.59

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/x260-ultranav-middle-button-opens-Cortana/td-p/3322349
Relevancy 47.73%

Anybody got middle button under TrackPoint working as it was under XP? I don't need zoom nor scroll controls (stupid nonsense having this) - simply a middle click as it was before. Firefox and IE opens new tabs directly with it, doing X-things (Unix/Linux) remotely without middle click driving me crazy. Any help would be highly appreciated. rob* [update]After lot of fiddeling around luckily it is working. I cannot tell what was the reason. Assuming, that update of Ultranav driver and utility to latest version brought the wanted effect. Message Edited by willi21 on 09-22-2008 11:08 AM

https://forums.lenovo.com/t5/ThinkPad-T61-and-prior-T-series/Solved-Z60m-2529FKG-Ultranav-no-normal-mouse-middle-button/td-p/51066
Relevancy 47.3%

Hi, apparently I have some suspicious stuff on my computer. Like the title says, I have the Google (EDIT: and other search engines) redirection to ads problem in Firefox. On top of this, though, Chrome is unresponsive on startup (the "kill pages" box comes up, but isn't able to do anything). Also, every so often Windows will say that some host process has become unresponsive and will stop it. I ran Malwarebytes Anti-malware, and it was able to fix about 15 problems, but the issues all still persist.

Could anyone give me a hand? Thanks!
EDIT: I'm on Vista Home Premium sp2

A:Firefox redirect, Chrome unresponsive on startup and host process becomes unresponsive. Help?

Hello and welcome. Let's see what these logs show. Reboot into Safe Mode with Networking How to enter safe mode(XP/Vista)Using the F8 MethodRestart your computer. When the machine first starts again it will generally list some equipment that is installed in your machine, amount of memory, hard drives installed etc. At this point you should gently tap the F8 key repeatedly until you are presented with a Windows XP Advanced Options menu. Select the option for Safe Mode with Networking using the arrow keys. Then press enter on your keyboard to boot into Safe Mode. >>>> Download this file and doubleclick on it to run it. Allow the information to be merged with the registry.RKill....Download and Run RKillPlease download RKill by Grinler from one of the 4 links below and save it to your desktop.

Link 1
Link 2
Link 3
Link 4

Before we begin, you should disable your anti-malware softwares you have installed so they do not interfere RKill running as some anti-malware softwares detect RKill as malicious. Please refer to this page if you are not sure how.
Double-click on Rkill on your desktop to run it. (If you are using Windows Vista, please right-click on it and select Run As Administrator)
A black screen will appear and then disappear. Please do not worry, that is normal. This means that the tool has been successfully executed.
If nothing happens or if the tool does not run, please let me know in your next replyDo not reboot your computer after running rkill as the malware programs will start again. Or if rebooting is required run it again.If you continue having problems running rkill.com, you can download iExplore.exe or eXplorer.exe, which are renamed copies of rkill.com, and try them instead.Next run Superantisypware (SAS): Download and scan with SUPERAntiSpyware Free for Home UsersDouble-click SUPERAntiSpyware.exe and use the default settings for installation.An icon will be created on your desktop. Double-click that icon to launch the program.If asked to update the program definitions, click "Yes". If not, update the definitions before scanning by selecting "Check for Updates". (If you encounter any problems while downloading the updates, manually download them from here. Double-click on the hyperlink for Download Installer and save SASDEFINITIONS.EXE to your desktop. Then double-click on SASDEFINITIONS.EXE to install the definitions.)In the Main Menu, click the Preferences... button.Click the Scanning Control tab.Under Scanner Options make sure the following are checked (leave all others unchecked):Close browsers before scanning.Scan for tracking cookies.Terminate memory threats before quarantining.Click the "Close" button to leave the control center screen.Back on the main screen, under "Scan for Harmful Software" click Scan your computer.On the left, make sure you check C:\Fixed Drive.On the right, under "Complete Scan", choose Perform Complete Scan.Click "Next" to start the scan. Please be patient while it scans your computer.After the scan is complete, a Scan Summary box will appear with potentially harmful items that were detected. Click "OK".Make sure everything has a checkmark next to it and click "Next".A notification will appear that "Quarantine and Removal is Complete". Click "OK" and then click the "Finish" button to return to the main menu.If asked if you want to reboot, click "Yes".To retrieve the removal information after reboot, launch SUPERAntispyware again.Click Preferences, then click the Statistics/Logs tab.Under Scanner Logs, double-click SUPERAntiSpyware Scan Log.If there are several logs, click the current dated log and press View log. A text file will open in your default text editor.Please copy and paste the Scan Log results in your next reply.Click Close to exit the program.If you have a problem downloading, installing or getti... Read more

http://www.bleepingcomputer.com/forums/t/372724/firefox-redirect-chrome-unresponsive-on-startup-and-host-process-becomes-unresponsive-help/
Relevancy 47.3%

I understand its Free vs Paid product comparision but anyway
 

A:F-Secure Internet Security 2016 vs Panda Free Antivirus 2016

If a security soft ranks amongst the top performing AVs, it won't matter much if it does function correctly or causes problems on your specific system.

From lab test results F-Secure has an edge over Panda during testing the past few years in terms of detection (although higher false positives).

From users, it seems more prefer Panda - which is one of Neil Rubenking's (PCMag) favs (that don't mean much - but that is just my opinion).

I'd say, in terms of overall protection, Panda has a slight edge; it might protect your system in a few instances that F-Secure will not.
 

https://malwaretips.com/threads/f-secure-internet-security-2016-vs-panda-free-antivirus-2016.54771/
Relevancy 46.87%

so jump lists via my taskbar and windows 10, I'm not having much joy :-(

I've just got a new desktop (Jan 2016) with windows 10 pre-loaded and I installed office 2010 - jump lists didn't work - so I thought I'll uninstall and install office 2016 64bit - jump lists still don't work arrggggg!

But they work for IE and notepad and file explorer but not for firefox or photoshop elements.

I've tried deleting the files from:
%APPDATA%\Microsoft\Windows\Recent\AutomaticDestinations
%APPDATA%\Microsoft\Windows\Recent\CustomDestinations
and rebooting but to no avail

any ideas anyone????

I really need jump lists working for Excel & Word.

srv

A:Jump Lists Not working for Word 2016 or Excel 2016

Hmm, jumplists work perfect for me with office 2007. You aren't the only one having this issue

http://www.tenforums.com/software-apps/41821-jump-lists-not-working-word-2016-excel-2016-a.html
Relevancy 46.87%

so jump lists via my taskbar and windows 10, I'm not having much joy :-(

I've just got a new desktop (Jan 2016) with windows 10 pre-loaded and I installed office 2010 - jump lists didn't work - so I thought I'll uninstall and install office 2016 64bit - jump lists still don't work arrggggg!

But they work for IE and notepad and file explorer but not for firefox or photoshop elements.

I've tried deleting the files from:
%APPDATA%\Microsoft\Windows\Recent\AutomaticDestinations
%APPDATA%\Microsoft\Windows\Recent\CustomDestinations
and rebooting but to no avail

any ideas anyone????

I really need jump lists working for Excel & Word.

srv

A:Jump Lists Not working for Word 2016 or Excel 2016

Hmm, jumplists work perfect for me with office 2007. You aren't the only one having this issue

http://www.tenforums.com/general-discussion/41821-jump-lists-not-working-word-2016-excel-2016-a.html
Relevancy 46.44%

I set the trackpoint speed in the mouse pointer options in control panel nbsp to max speed and then I also set the trackpoint to max speed in the synaptics specific driver nbsp nbsp This is great the mouse is really responsive and i can scroll quickly and move the mouse from the left side to the right with very little pressure nbsp nbsp Recently though I have noticed that the trackpoint nbsp has about halved in responsiveness and to move at full speed i have to apply maximum pressure against the trackpoint nbsp nbsp This is making my finger quite sore and is extremely annoying even my old t and trackpoint 4 less Lenovo resp... Gen (20FB) became X1 T have way better trackpoint responsiveness nbsp nbsp I've tried reinstalling the trackpoint driver but no luck nbsp I noticed that there seems to be a fairly recent trackpoint driver update Lenovo X1 Gen 4 (20FB) trackpoint became less resp... and was wondering if that was the problem nbsp nbsp But lenovo do not publish the Lenovo X1 Gen 4 (20FB) trackpoint became less resp... older drivers like they used to nbsp nbsp nbsp How do I fix this I'm not even certain whether it is a software issue or hardware nbsp

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Lenovo-X1-Gen-4-20FB-trackpoint-became-less-responsive/td-p/3380491
Relevancy 46.44%

Hello there everyone,

I'm actually on Kaspersky Antivirus v2016, and i was wishing to go to the freeware side. But i definitly do not want to sacrifice security. Does Panda offer same or even better security than Kaspersky, or shall i rather stay where i am?

Any opinions are welcome.. Thanks in advance
 

A:Panda 2016 Free vs Kaspersky Antivirus 2016

without doubt, i'd choose kaspersky antivirus
 

https://malwaretips.com/threads/panda-2016-free-vs-kaspersky-antivirus-2016.56160/
Relevancy 45.58%

trying to install windows x on a thinkpad x type fb and having issues nbsp Already called Lenovo support x1 install 20fb Win7 on SM951aPCIe... type thinkpad & and they were not help nbsp Can someone help with this Win7 install on thinkpad x1 type 20fb & SM951aPCIe... problem when i Win7 install on thinkpad x1 type 20fb & SM951aPCIe... try to boot from a usb drive with a windows i am able to see the PCIe NVMe drive but when i tried to format or click new to install windows i recieve a message of this hardward may not support booting to this drive and i am not able to install windows nbsp The drive is visible through the bios and through the boot menu nbsp But cannot install into the NVMe drive nbsp i read somewhere on the forum that the new skylake and nvme only works if the boot option is set to uefi nbsp tried that too but did not work nbsp Can someone help me with this issue i just need some help trying to install windows x on thinkpad x type fb with SM aPCIe NVMe nbsp Is there a bios option that i need to change to make the laptop see the NVMe drive When i install a M drive i am able to install windows without any issues but having issues with the SM aPCIe NVMe drive nbsp Thank you Solved Go to Solution

A:Win7 install on thinkpad x1 type 20fb & SM951aPCIe...

What gen is your x1 carbon? Is it 3rd gen? If so that model does not support NVMe ssd due to it has no NVMe technology only 4th and yoga model of x1 Carbon has got NVMe support.

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/Win7-install-on-thinkpad-x1-type-20fb-amp-SM951aPCIe-NVMe-issue/td-p/3305710
Relevancy 45.58%

Which av is best ?

BD Free is not compatible with Windows 10
 

A:Bitdefender free 2016 vs Panda free 2016 vs Avira free 2016

1-Panda
2-Avira
3-BitDefender

This is my Top from what you listed.
 

https://malwaretips.com/threads/bitdefender-free-2016-vs-panda-free-2016-vs-avira-free-2016.54439/
Relevancy 44.72%

 HiI own a X1 Carbon Gen 2 thinkpad and wonder if it is possible to replace the current keyboard with a X1 Carbon gen 3 keyboard (with proper mouse buttons), or if it will not fit?I have tried to check the manuals and the connectors seems similar although some things, such as the fingerprint reader, seems different. I have no problem "loosing" the adaptive keyboard and fingerprint reader if I can have all the functionality of the keyboard and trackpoint on the new "keyboard" (i.e. the gen 3 frontpanel).

A:X1 Carbon Gen 3 Keyboard on X1 Carbon Gen 2

I am interested in this exact topic as well. Looks like the Gen 3 keyboards lack the adaptive keyboard - that clear stripe on the top that changes. The FRU for these X1 Carbons seem to be the whole keyboard, adaptive part, trackpad and bezel - they go for 150 USD or so. Problem is we don't know if it will work given the model year differences. A nice alternative would be just to replace the trackpoint. They came close with this one, but it is no macbook in terms of tactile feel of the pad. I really am having a hard time with it and it's been about a month.  Lenovo please help!

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Gen-3-Keyboard-on-X1-Carbon-Gen-2/td-p/1939212
Relevancy 43.43%

"Patch Tuesday" broke our install of Outlook 365. It was working fine on Monday and on Tuesday it was hanging on "Processing." So I restored back to the last restore point before the update and it worked great after that. Yesterday it re-installed the updates, and again Outlook didn't load. Restoring again today "fixed" it. Now it wants to update again, so I will disable updates until the problem is fixed. I don't know which particular "patch" is causing the problem; there were about 22 of them that installed.

http://www.sevenforums.com/microsoft-office/391363-outlook-2016-hangs-processing-after-windows-7-update-feb-9-2016-a.html
Relevancy 42.57%

A recent cumulative update for Exchange 2016 was intended to add support for Windows Server 2016. But, after numerous reported issues, Microsoft has acknowledged a problem exists.

According to the release notes?

If you attempt to run Microsoft Exchange 2016 CU3 on Windows Server 2016, you will experience errors in the IIS host process W3WP.exe. There is no workaround at this time. You should postpone deployment of Exchange 2016 CU3 on Windows Server 2016 until a supported fix is available.

Once again, Microsoft?s testing of its own patches seems to have taken a backseat to accelerated release deadlines.
 

https://hardforum.com/threads/avoid-running-exchange-server-2016-on-windows-server-2016-for-now.1916406/
Relevancy 41.28%

Hello,

If you had to choose an antivirus, which you will take between two? And why ?

Thank you and good holidays!
 

A:F-Secure Internet Security 2016 VS Norton Security 2016

In my opinion, Norton gives you a better protection. He has SONAR( Behavior protection), very good feature.
Fsecure uses Bitdefender engine but isn't the best AV according AV Comparatives.
Norton is light, has strong firewall, good signatures and cloud reputation + Sonar protection for zero-day threats.
 

https://malwaretips.com/threads/f-secure-internet-security-2016-vs-norton-security-2016.54493/
Relevancy 38.7%

Hi,
OK I have read many threads and posts about the solution "ZeroConfigExchange". But it does'nt work for my Windows 10 clients.

Windows 10 x64Office 2016Office 365 / Azure AD accountsClient computer is join with Azure AD so the users login with Office 365 accountsNo On-promise AD, only Azure ADAutoDiscover and modern authentication works with sharepoint and Outlook 2016Dword "ZeroConfigExchange" = 1 is created in both regkeys for all users
HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook\AutoDiscover
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\16.0\Outlook\AutoDiscover
Problem
When I start Outlook 2016 for first time users it still prompts the "Welcome to Outlook 2016" setup wizard where I have to create a profile.

What am I doing wrong?
Best regards

A:Outlook 2016 skip "Welcome to Outlook 2016" setup wizard

It will be best for you if you ask this question in a forum dedicated solely to MS Office Outlook 2016.
I recommend that you use this forum :
http://answers.microsoft.com/en-us/o...=1460639513346

http://www.tenforums.com/browsers-email/47269-outlook-2016-skip-welcome-outlook-2016-setup-wizard.html
Relevancy 37.41%

I ve tried many free antivirus over the years but these two have always consistently been the ones I liked the most After some issues with Windows last year I had to briefly switch to Avira but after the issues were fixed I got back to Avast because it was the one I had learned to rely upon in the last few years However I m open to reassess my position between these two excellent products Something that has also spurred me to reassess the situation was the fact that LifeHacker has recently changed their recommendation from Avast to Avira as the quot The Best Free Antivirus App for Windows quot Free vs Antivirus 2016 Avira Free Avast 2016 Antivirus On one hand Avast offers a more complete feature set File System Shield Web Shield Mail Avast Free Antivirus 2016 vs Avira Free Antivirus 2016 Shield Behavior Blocker DeepScreen Still I disable the E-mail blocker because I solely use Web mail I also disable the Web shield because It seems to slightly slow down my browsing I don t like to have all my HTTP traffic analyzed by the AV or any other program Sometimes it doesn t play well with HTTPS because it internally to scan the encrypted traffic which changes the original website s certificate I know I can selectively disable the Web Shield for HTTPS only So in practice I have been using the File System Shield and the Behavior Blocker at default sensitivity settings no Hardened Mode to avoid too many False Positives and issues with less known software I ve had no problems with this set up for a long time Regarding Avira it lacks Mail and Web Shield it only has a File System Shield and as far as I m aware they don t have a Behavior Blocking technology like Avast They rely entirely upon signatures and heuristics More recently they also have the Avira Protection Cloud which sends file signatures to the cloud in order to provide better protection does it really improve upon the local signatures and heuristics or is it just a fad The lack of Behavior Blocking is what concerns me in terms of how well protected I am with Avira compared to Avast Is it really better to have Avira with its better quot traditional engine quot or is it better to stick with Avast which sports a slightly worse quot traditional engine quot but that possesses advanced Behavior Blocking technology DeepScreen I m also interested in other aspects besides protection namely Resource Usage I m mainly concerned with CPU usage I d also like to keep disk access to a minimum because I don t have an SSD which means I don t want my AV to slow the disk access even further Performance Impact On daily usage only with real-time protection enabled which one has less impact on overall system performance Ads Popups and Nagging in general How is the upgrade nagging on the two products I mean with Avast I ve had no problems recently The only popups I usually see are related to the real status of my system or Software Updater notices to update a given program e g Skype I may very rarely see a popup that talks about some paid Avast product but they are pretty rare I believe How is this on Avira Does it still show you a popup on every update every day What kind of advertisements can I expect P S Last time I used Avira it had a slightly annoying behavior Every time it would detect some infected file it would then force me to automatically run a Quick Scan on the system This was a bit annoying and time consuming at times Is this still happening today I hope you guys can help me by sharing your experiences and opinions about both products I ll update this post if needed nbsp

A:Avast Free Antivirus 2016 vs Avira Free Antivirus 2016

I vote for avast free more options more tweaks u can do in any option, and good deleting " dangers ". ofc software updater desactivate.
avira is anoying when detect some " infecction". run quick scan then many times ask fot reset pc not really good deleting real "dangers".
another thing is " the cloud " based.. oh common without internet cant do nothing really ?..
Abouth resources 50/50 both are good in this, ofc more " shields " u active and more " grade of detection " u activate more cpu/ram uses.
 

https://malwaretips.com/threads/avast-free-antivirus-2016-vs-avira-free-antivirus-2016.59231/
Relevancy 37.41%
A:Kaspersky Internet Security 2016 vs Avast! Internet Security 2016

If you have the money to purchase it, I would strongly recommend Kaspersky Internet Security 2016.
Overall, Kaspersky might not be as user friendly (many alerts when properly configured) and as light as Avast (Kaspersky always was a little hoggy, although that has been mostly fixed in the recent versions), however the security components of KIS are much more mature and powerful (when properly configured) than those of AIS.

In conclusions, if you have capable computer hardware and you don't mind a little bit of configuration and quite a few alerts, I would definitely recommend KIS.
If you believe that KIS might be too heavy for your system, and that you do not really visit suspicious sites and download suspicious applications, then I'd recommend AIS.
 

https://malwaretips.com/threads/kaspersky-internet-security-2016-vs-avast-internet-security-2016.54971/
Relevancy 36.98%

Just threw this article together I want all the brain's in this forum to chip in and if there is anything missing from this article at all let me know ASAP in this thread A top quote Quote Previously for Emulation Emu/Game 2016 2017 Best For Laptops (Best 2016/2017) Disagree? Agree Emulation or / Laptops we wrote a long post about Best Laptops for Hackers which included a run-down on the best laptops for programming and penetration testing pen-testing This article turned out to be very popular even though it wasn't exactly intended to be that now we are proud to finally publish the long-requested article of 'Best Laptops for Video Game System Emulation' The idea of this post is to give an accurate summary of which laptops are suited for or adept at emulating various consoles and Agree or Disagree? Best Laptops For Emulation 2016 / 2017 (Best Laptops for Emu/Game Emulation 2016/2017) their games and which ones also can easily perform these duties at the lowest possible cost Now obviously the better hardware you have the better your system will be at emulating other hardware software That doesn't necessarily mean a more expensive laptop Where the demands of hacking and pen-testing demand vital and significant internal storage the prerequisites for game emulation are generally just Agree or Disagree? Best Laptops For Emulation 2016 / 2017 (Best Laptops for Emu/Game Emulation 2016/2017) a good graphics processor and good RAM CPU Your laptop should also be in good working order and not muddled with high-risk pirated downloads and large bits of video To emulate efficiently you should also have as little processes and programs running in order for the emulator to run smoothly These are all common sense tips but If you are looking to emulate more recent systems then your laptop will have to carry a large capacity to run multiple processes extensions and to keep up with the emulator's CPU requirement That's just to start If you plan on emulating large D-environments as in a st-Person-Shooter such as COD and God of War as well as any extensive RPG-Environment then you will need additional processing requirements and a fairly up-to-date graphics card on your laptop For AMD processors you should be looking at FX or better For Intel processors you should be looking at i or i processors such as i - K and i - K the quot K quot series allows for overclocking and consistent and smooth performance Great i processors are i - MQ and i - MX and are pretty affordable in comparison to newer variants Lastly for emulating newer games GEForce GPU Graphics cards are preferred almost necessary - GB of RAM minimum on your laptop Computer will work fine Best Laptops For Emulation Best Laptops for Emu Game Emulation https area blogspot com - html

http://www.techist.com/forums/f84/agree-disagree-best-laptops-emulation-2016-2017-best-laptops-emu-game-emulation-2016-2017-a-278489/
Relevancy 36.12%

Hi, Did anybody succesfully install 1 TB drive on gen 2 yet? Something like below drives: https://www.amazon.com/Sandisk-Solid-State-Drive-SD8SN8U-1T00-1122/dp/B0194MV300/ref=sr_1_1?ie=UTF8&... https://www.amazon.com/Samsung-850-EVO-Internal-MZ-N5E1T0BW/dp/B01G844PC0/ref=sr_1_7?ie=UTF8&qid=147...

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Gen-2-1TB-ssd/td-p/3430148
Relevancy 36.12%

I have two gen 2 X1 carbons, one with an i5 4200u (8GB RAM) and the other is i5 4210u (4GB RAM). The 4210u one, when not doing anything very intensive, is completely silent. I can put the vent up against my ear and hear nothing at all - the fan is off. The 4200u is not the same. When it boots off, the fan is off. It will stay off for about 30 seconds and then start up. It's very quiet but I don't see why it's on at all. It should be off, all it's doing is wasting power. Why is it that the 4210u stays off until I'm doing something intensive but the 4200u is always on? The 4210u is 100Mhz faster but they have the same TDP. Is there something I forgot to install after updating to Windows 10 that tells the fan to shut up when not doing much? Thanks for any help

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-fan-always-on/td-p/3450334
Relevancy 36.12%

Looking to replace my W530 for something a little lighter ...Any ideas when we'll see X1 Carbon with USB-C?

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-USB-C-when/td-p/3313472
Relevancy 36.12%

Hi,  I have read that all the carbons after the gen 2 use an M2.ssd. Is there anything to stop you from changing or swapping the ssd around. Are there any videos or pictures online that might show me where the drive is located.  Is there anything that would stop me from buying the model with the smallest and cheapset M2 ssd and then later putting in something newer? Thanks

A:X1 Carbon Gen 4 SSD

Sorry, perhaps I can rephrase this a little clearer. Can I assume that all the thinkpad carbon gen 4s will support any NVMe M2 SSD that I buy?

https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Gen-4-SSD/td-p/3306872