Windows Support Forum

Notebook Pavilion 7 hp problems after hard reset

Q: Notebook Pavilion 7 hp problems after hard reset

What do i need to do if mine laptop doesn't do anything after the hard reset. It goes on and then it automatically shut off

http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Notebook-Pavilion-7-hp-problems-after-hard-reset/td-p/5712605
Relevancy 100%
Preferred Solution: Notebook Pavilion 7 hp problems after hard reset

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 17.2%

I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).

Thank you
 

A:Do you need more than Windows default tools to check/repair a hard drive?

IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
 

http://www.techspot.com/community/topics/do-you-need-more-than-windows-default-tools-to-check-repair-a-hard-drive.217548/
Relevancy 16.77%

I've said time and time again that solid state drives are the future but the truth of the matter is, traditional spinning disks still have a place inside a modern PC as a storage / backup drive. The question then becomes,...

Read more
 

A:Latest hard drive reliability data reveals it may be best to avoid 3TB drives

Well I'm glad I have never bought a Seagate HD. I usually buy Western Digital, except my SSD is Samsung.
 

http://www.techspot.com/community/topics/latest-hard-drive-reliability-data-reveals-it-may-be-best-to-avoid-3tb-drives.208285/
Relevancy 26.23%

I have an old Toshiba laptop and it is unusable and I was wondering if there was a way to factory reset it without a disk.

Model # - psk2cu-s5150
 

A:Reset My Laptop

I believe there's a partition that contains the OEM setup, but you need a CD (any) and to recover from the Restore partition
 

http://www.techspot.com/community/topics/reset-my-laptop.217201/
Relevancy 15.05%

To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp

A:Problems with wireless network adapter

Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
 

http://www.techspot.com/community/topics/problems-with-wireless-network-adapter.188964/
Relevancy 15.48%

Hello I have a Dell Inspiron laptop I have an image of the entire hard drive that I created when I first got the computer using Acronis TrueImage and I d like to restore that image returning the laptop back to that fresh clean original state I ve done this two or three times before and it worked great each time But now there s a problem Normally I would in boots as when drive external but laptop hard Primary recognized isn't drive used connect to the laptop a USB storage backup drive that has the disk image boot the laptop from a Rescue Media CD created by Acronis then restore that disk image from the back-up drive onto the laptop s HDD When I tried it this time round the laptop s HDD was not listed in TrueImage at all I created a new rescue media disk tried it again and got the same result I then took the HDD out of the laptop connected it to Primary hard drive boots in laptop but isn't recognized when used as external drive an adapter kit that let s you power up and plug in the drive via a USB port and external power supply and tried the same procedure using my desktop to run the operation Same result The drive was not detected by Acronis The drive does not seem to spin up at all Primary hard drive boots in laptop but isn't recognized when used as external drive when it is connected Keep in mind the drive still works when installed in the laptop -- it boots into Windows XP etc When I plug the drive into my desktop the drive does not show up in Disk Management Start Right-click My Computer Manage Disk Management It doesn t show up in either of the two right-side windows so there s no way I know of to format it or do any work on it in Windows When I go to Device Manager Disk Drives I see quot USB Device quot for that drive and under Properties it is listed as quot Disk Drives quot for quot Device Type quot and its status says it is working properly So what I don t get is it works fine when it is in the laptop boots into XP etc but when connected as an external drive or when the laptop is being run off of CD the drive can t be detected and not on just one computer but multiple Is it junk Any ideas nbsp

A:Primary hard drive boots in laptop but isn't recognized when used as external drive

It's a power issue. Had the same issue taking a 2.5" laptop hdd and attempting to hook up w/ a passive usb sata hdd cable. my recommendation is to use a powered usb sata cable. like this one: http://www.newegg.com/Product/Product.aspx?Item=N82E16812119475 having proper power will allow the USB bus to detect and power the hdd correctly. Hope this helps, take care!
 

http://www.techspot.com/community/topics/primary-hard-drive-boots-in-laptop-but-isnt-recognized-when-used-as-external-drive.174938/
Relevancy 25.8%

Hello everyone,

This happened couple days ago when my laptop started to act like crazy.. It used to freeze but two days ago it shuts down when I'm in the middle of doing something like Photoshop.. It even shut down while posting this thread once..
I thought it'd be a problem with the windows so I installed a fresh one but yet the problem is not solved..
And after some search on internet I came up with some apps like HDD and CPUID Monitor and here's a snapshot of the scan, and I wish someone of TECHSPOT family would help, that'll be so much appreciated..

Thank you.
 

http://www.techspot.com/community/topics/my-hp-pavilion-shuts-down.216441/
Relevancy 14.19%

AMD has released an updated statement regarding the noise issues experienced by the initial buyers of its Radeon R9 Fury X graphics cards.

Read more
 

A:AMD issues updated statement regarding Radeon R9 Fury X noise problems

Are they saying "screams like a banshee until we smothered it in glue"? Does anyone have a more engineered approach to the issue - like decibels at a specific distance?
 

http://www.techspot.com/community/topics/amd-issues-updated-statement-regarding-radeon-r9-fury-x-noise-problems.216306/
Relevancy 15.05%

It's been a while since I've posted but I've obtained most of the Sims 2 and I TRIED to install Double Deluxe but for some reason my dvd drive isn't recognizing the disc. It spins up and tries to read it, but doesn't do much in the line of effort to read it.
There are no scratches and I took care of the smudges with a cloth. Still unable to read the install disc. It'll read the promo/bonus disc and play it just fine though.
The computer is a Windows 7 with an HL-DT-ST DVD+-RW GT60N Drive.
I have enough RAM, Graphics and other things to run it.
300 Gigs of Space left on the HDD. No idea what's going on here.
 

A:Sims 2 Double Deluxe problems

You might have a bad optical drive. Does it work with other DVDs (DVDs not CDs)? Do you have access to another DVD drive with which to substitute for testing purposes?
 

http://www.techspot.com/community/topics/sims-2-double-deluxe-problems.216270/
Relevancy 15.05%

I have a linksys router that has stock firmware and I can get into the config by 192.168 etc but I can't get it to see the internet. I have a isp that gives dhcp ip so no login needed. Any ideas?
 

http://www.techspot.com/community/topics/problems-with-wrt-54g-linksys-router.215894/
Relevancy 15.05%

Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp

A:Building computer boot up problems

Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:

1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...

2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...

3. Start adding one piece of hardware at a time and repeat as directed.

What are your findings?
 

http://www.techspot.com/community/topics/building-computer-boot-up-problems.215853/
Relevancy 17.63%

Today, my external hard drive has not appeared on my PC. It did work before I went to sleep yet when I began my PC in the next morning, it didn't show. Can you please help me how to fix this?
 

A:External hard drive not showing up on my PC

Hello there,

There are a lot of different reasons for an HDD to stop showing. A few things you can try are:

Try using a different USB cable, make sure it is as short as the original one, or even shorter. This is important it terms of providing enough power for the drive to function properly.

Try connecting it to different USB ports.

Try connecting it to a different PC.

Sometimes the drive can misbehave due to insufficient power even if it appears to be spinning make sure you connect the HDD directly to the USB port and not through a USB hub.

Check if you can see the HDD in Windows Device Manager and in Disk Management. Good luck.
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-on-my-pc.209548/
Relevancy 17.63%

Dear frnds,

I have been using my external hard disk(WD My Passport Essential SE) 1 Tb, since last 6 months, but after a recent virus scan, my laptop is not showing the external hard disk, i have tried using My computer, Manage and Disk management.

I am unable to find external hard disk even in Disk management i.e. it is not showing.
So please can anyone help me in this concern......
I would really appreciate and thanks in advance
 

A:Problem with my external WD 1TB My Passport hard disk

First, try accessing it from another computer to be sure it can be accessed elsewhere. The Western Digital Passport Essential has had a pretty high failure rate as seen in our shop... so the unavailable external hard disk may not have anything to do with the virus scan may have nothing to do with the problem.

In other cases, I would attempt to reinstall the Passport drive. You do not usually cause any damage to the data on the drive when you do this.
 

http://www.techspot.com/community/topics/problem-with-my-external-wd-1tb-my-passport-hard-disk.176021/
Relevancy 17.2%

Hi

Thanks for any help in advance..

I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..

I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.

Thanks
 

A:External USB hard drive not recognised on Windows after plugging it into a Mac

Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.

Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)​
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
 

http://www.techspot.com/community/topics/external-usb-hard-drive-not-recognised-on-windows-after-plugging-it-into-a-mac.200827/
Relevancy 14.62%

Basically I think it s Laptop Samsung Ultrabook Series 5 Problems; been happening for a month now My laptop screen glitches - the images distorting and sometimes green text appearing - Laptop Problems; Samsung Ultrabook Series 5 before Laptop Problems; Samsung Ultrabook Series 5 righting itself and crashing The only way I can get the Laptop Problems; Samsung Ultrabook Series 5 laptop to function again is to turn it off via the power button or take the battery out and put it back it again It has also become slow starting up - taking at least five minutes before you can log in and then a further five before you can actually do anything The cursor sometimes gets stuck in the center of the screen - I can access things using the tab screen but the cursor won t move whether I use the laptop touchpad or my USB mouse The fan has also been sporadically speeding up before calming down again - even though I ve been doing the same thing for the past god knows when I ve done a boot-up scan using avast had a look through all of my files and gotten rid of any old files that I don t need on there in an attempt to create some space but I ve got about - gb free so I can t see why that should be a problem Nothing happens before the glitches crashes so I don t think I m causing it by moving it and so on About a month ago the charger port was fixed at a laptop repair shop and then the laptop itself was sent off to SAMSUNG to have the motherboard replaced because I mistakenly wiped the bios since one driver update shut the laptop off in the middle of the bios update so I don t know if something is loose and so on I m planning on selling it in a month or two so it s not that much of a problem but of course I don t want to sell it to someone if its being a pain in the backside I also switched from integrated graphics to a nvidia geforce graphics card that is in the laptop when I bought it so that might be why Basic Info Samsung Ultrabook Series Intel Core i GB Ram TB Hardrive bit Operating System NVIDIA Geforce GT M nbsp

A:Laptop Problems; Samsung Ultrabook Series 5

This sort of problem is tough to troubleshoot over the internet. It could be quite a few things that could cause the symptoms that you're experiencing. With that said, I'd probably start with updating the discrete GPU drivers. Since you did switch from integrated to discrete, this could be the main cause for the graphic glitches which is probably crashing the system.

Moving forward, I think you should download something like CPU-Z to monitor the CPU load and temperatures during the crashes. It could be that your CPU is overheating and could use some attention.
 

http://www.techspot.com/community/topics/laptop-problems-samsung-ultrabook-series-5.213703/
Relevancy 15.05%

I have a keyboard that has been working fine last night then this morning this happened:

When I type o it types o+ and when I type l it types l and enter (the key)
So this makes it extremely hard to get anything done, please help, thanks
 

A:Keyboard problems

How old is the keyboard? Sometimes "gunk" gets built up under the keys and can cause the keyboard to start failing. Have you tries to remove the keys (or take the keyboard apart) and properly clean it? There are plenty of tutorials (video and non-video) available if you are unsure of how to clean a keyboard.
Regular cleaning on all computer parts will extend the life of those parts.
 

http://www.techspot.com/community/topics/keyboard-problems.213578/
Relevancy 17.63%

Hi I have a few questions about my external hard drive. I play games and I noticed that my internal hard drive was getting full so I bought a new external hard drive. I was wondering if I backed up my internal hard drive to my external one and then formatted my internal hard drive, would I have to re install everything or would I be able to access my games and such. Thanks for your time its much appreciated.
 

A:External Hard Drive

You would have to e-install all of your games, and applications, and windows updates
 

http://www.techspot.com/community/topics/external-hard-drive.213122/
Relevancy 16.77%

I have a three month old Dell Dimension GHZ P Gig Ram and a gig SATA Hard Drive When I got the computer I used the files and transfer PC Relocator utility And had in Error system drives did hard Message: disk find Setup not your installed any a bunch of unwanted extras that came with it I m having a Satellite Internet system installed and they wanted a clean install of windows XP So I opened the owner s manual and got out the reinstallation disk and the problems began By the way Dell tech support s only response has been to say gee that s not right and would send a tech sometime after Christmas Anyway heres step by step what I did I boot to the Dell reinstallation disk Error Message: Setup did not find any hard disk drives installed in your system The windows setup screen appears and loads files The next screen says welcome to setup and offers three options -to setup XP press enters To repair XP press R to exit without installing XP press F I press enter and the following message comes up Setup did not find any hard disk installed in your computer Make sure any hard disk drives are powered on and properly connected And any disk related configuration is correct ect Press F to quit It dose this if I try repair also Dell had me check the connections to the HD and Motherboard They re good And debug the hard drive No luck Everything worked fine until I put in the reinstallation disk Any help would be welcome nbsp

A:Error Message: Setup did not find any hard disk drives installed in your system

During Setup, it will ask you if you need any extra drivers such as SCSI (or SATA in your case). If so, press F6. Now you are in trouble, because SATA drivers come on a floppy and new(er) Dells don't have a floppy anymore. Borrow a floppy-drive from another PC and install that in your Dell.
Setting up with the Dell disks, I'm not sure if they are RESTORE-disks or full XP-disks.
That may cause another problem.
 

http://www.techspot.com/community/topics/error-message-setup-did-not-find-any-hard-disk-drives-installed-in-your-system.18329/
Relevancy 17.2%

Guys I need all the expert help I can get I ve got a Western Digital quot My Book quot i think it was called that that has had every picture that me and my girlfriend have ever corrupt drive hard photos All on newborn external taken including when we first met holidays pets and most importantly pictures of All newborn photos corrupt on external hard drive my girlfriends pregnancy and s of photo s of our month old son that have all gone missing and even some other photo s that still show the thumbnail image don t open because I get an error saying that photo s are corrupt or damaged my girlfriend is already going mad and I don t know what software to get them back At present i ve tried opening with different picture veiwers like photoshop no luck I ve tried EASEUS Photo recovery software but then cancelled because I read that Recova could do a better job turns out recova doesn t work on external drives NOW NOTHING WILL OPEN ON THE EXTERNAL HDD I need some expert advise on what program WORKS to try and recovery these files A S A P because otherwise we will be devistated I don t wanna buy loads diferent software only to find that i m doing more damage nbsp

A:All newborn photos corrupt on external hard drive

try pc inspector file recovery. http://www.snapfiles.com/get/smartrecovery.html

ALWAYS back up photos to more than one device.
 

http://www.techspot.com/community/topics/all-newborn-photos-corrupt-on-external-hard-drive.156964/
Relevancy 15.05%

For about the past month or so, my W7 tower on DSL occasionally loses its connection to the internet so I right click the the icon in the notification area & click trouble shoot & it reconnects yet my iPhone & Ipad remain online no problem.
Why?
 

A:Intermittent DSL connection problems

Clearly the router is doing find and the activity on W7 IS THE ISSUE.
Examine carefully what was active when the connection was lost.
 

http://www.techspot.com/community/topics/intermittent-dsl-connection-problems.207951/
Relevancy 25.37%

Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.

I need help as fast as possible

Thank you
 

http://www.techspot.com/community/topics/dell-optiplex-620-connect-power-reset-buttons.212270/
Relevancy 17.2%

Hello I need urgent help with resolving this as I am trying to get the harddrive showing up or at least recover files by Hard Portable Drive External Slim detected Seagate PC not I was using it at school first and my computer froze so I shut down the Seagate Portable External Hard Drive Slim not detected by PC computer and restarted without safely removing Seagate Portable External Hard Drive Slim not detected by PC the hard drive at first the PC wouldnt reboot because I had it still plugged in after unplugging it and the PC loaded up it did not recognize the hard drive anymore I have tried it on several PCs including the one at home all using Windows and none of them recognize it I tried all USB ports on my PC and none of them work the light on the hard drive is ON so I know there is no connectivity issue I tried several free trial softwares even the ones by Seagate and none of them recognized the drive so I cannot use their tools for recovering files or detecting the hard drive When I check the Disk Management it does not show there When I check the Device Manager it does not show under USB controllers but it DOES show under Disk Drives I also checked and the drive is up to date The Model is BUP Slim BK In my quick launch the drive is recognized there and gives me the option to Eject it but it doesn t actually Eject it when I click on it it either stop responding or does nothing unless I manually unplug it EDIT After a really long time the Eject message says the device is already in use which is probably why it doesnt Safely eject nbsp

A:Seagate Portable External Hard Drive Slim not detected by PC

I am also having the same problem, as I need to get some stuff off my hard drive but it does not show up on any of it, was just wondering if you had found a way to fix this yet?
Kind Regards
 

http://www.techspot.com/community/topics/seagate-portable-external-hard-drive-slim-not-detected-by-pc.207640/
Relevancy 15.05%

I have a Dell Optiplex 330 which has a 2.0 dual processor with 4gb of ddr2 ram. I have windows xp installed and I have a video card that has 1024 mb of ram. I am unsure of the brand of video card or further specs. I bought it off of ebay some time ago.

My problem is that when I try to play streaming video it wants to freeze a lot. I have already given more space for the virtual memory on my computer: I think 4 to 8 gb and I have set my hardware acceleration way down but these changes haven't helped.

I can download and play movies fine, I only seem to have problems when playing streaming video like from hulu.com or letmewatchthis.com which directs you to sites like: putlocker, deditv, sockshare, loomba, etc. I have used other computers and they don't seem to have as much problems with this so I hope that somebody knows what I need to do to solve this problem. Thanks in advance for any help.
 

A:Freezing problems with streaming video

When you say freezing, do you mean just the video freezes, or the whole system? If its just the video, it could have something to do with your internet connection. Is the computer on wired internet or wireless?
 

http://www.techspot.com/community/topics/freezing-problems-with-streaming-video.164671/
Relevancy 17.2%

Look no further than a solid state drive for breakneck speed. If a large-capacity drive for storage is what you're after, however, traditional spinning hard drives are still the best bet in terms of price per GB. And if you...

Read more
 

A:Western Digital 'Green' hard drives now available in capacities up to 6TB

On a more interesting note, Seagate is already shipping 8TB HDD-s to its select customers, with 10TB ones to follow.

Besides, nothing beats the current 6TB Enterprise offer from Seagate anyway, in terms of price+performance+capacity. Let Western Digital lag behind as it does
 

http://www.techspot.com/community/topics/western-digital-green-hard-drives-now-available-in-capacities-up-to-6tb.204017/
Relevancy 17.2%

Hey,

Yesterday, I was working with my PC while my 1TB Seagate external hard (http://www.amazon.com/Seagate-FreeAgent-Ultra-Portable-External-STAA1000101/dp/B0045JLPMO) was plugged in via USB. The USB connection was a little bit loose.

Then when I was plugging a USB flash memory in, I noticed that the external hard was disconnected.
I connected it again, but it didn't appear in My Computer.
Here is the state in Disk Management and Device Manager:




After that, I plugged out the "SATA to USB converter" from the hard and connected it directly to SATA cable inside the PC case (like internal HDD), but this time nothing showed up in Disk Management, Device Manager and BIOS. However, it took a long time for the system to boot.


I searched and read lots of threads and tested some other stuff:





(It didn't appear in Minitool Partion Wizad).

I've got a lot of data on this HDD which really matters to me.
Any help is really appreciated.
 

A:FreeAgent 1TB External Hard stopped working (unknown, not initialized)

Hi there Sedhadi,

If your HDD is failing the manufacturer's tests it is probably dead. IF you need to get your data back look for a reputable data recovery company in the area.
Hope that helps.
 

http://www.techspot.com/community/topics/freeagent-1tb-external-hard-stopped-working-unknown-not-initialized.208828/
Relevancy 17.2%

When booting up my computer, directly after auto-detecting SATA devices, my computer regularly gives me an error that alternately reads "Primary Hard Disk Failure, Press F1 to Resume..." or "Secondary Hard Disk Failure, Press F1 to Resume..." Sometimes the word "Slave" or "Master" are there after the words "Primary" or "Secondary" in there as well. While the content of the message varies, the result is usually the same: The startup process lags after auto-detecting the drives, then gives me this error.

I have three SATA hard drives and a DVD drive plugged in to my mb via SATA. When no HDD are detached, but I have boot media in the DVD drive, the computer starts up quickly and normally, with no errors. When any or all of the HDDs are plugged in, I receive the above error. I borrowed a HDD from my roommate, plugged it in, attempted to boot up and still received the error. None of the HDD are bad, and it would be a pretty big coincidence for all four I've tested to fail at once.

What could the problem be?
 

A:Primary Hard Disk Failure, Press F1 to Resume

UPDATE:

When I plug in just one or two of the HDD + the DVD drive, the computer boots fine. When I plug in three HDD + DVD drive, failure! Do I perhaps need to upgrade my power supply?
 

http://www.techspot.com/community/topics/primary-hard-disk-failure-press-f1-to-resume.208761/
Relevancy 15.05%

Hello all...I'm having problems with my Dell PC. I just purchased a sweet new scanner (ScanSnap SV600) and when I scan a lot of pages at once, I get an error message saying I'm out of storage and to restart the computer. The specific code given is 0x8007000E. I've also been noticing when I run a few web tabs at once, sometimes they just go black and I need to restart the browser. It has 8GB of RAM and all the drivers are updated. Anything I'm missing? Thank you kindly!

Dell Optiplex 790
[email protected]
8GB RAM
Win 7 Pro
 

A:Memory Problems?

How much storage space do you have? From what I could research this error is tied to programs demanding a great deal of memory. You say this occurs when trying to scan a lot of pages at once. Does this occur when scanning less material at once? Have you tried updating your drivers for the scanner?
 

http://www.techspot.com/community/topics/memory-problems.208487/
Relevancy 17.2%

Hey guys weird problem here The TB internal drive in my PC started slowly dying in December and my brother got me an SSD additional and connecting when laggy hard drives PC sluggish for Christmas I installed it and it works amazing flawlessly and I love it When I attempted to make my old dying drive a secondary hard drive Windows PC laggy and sluggish when connecting additional hard drives recognized it fine despite the SATA connection broken off and I was able to salvage what I wanted from it The speed of the transfer was blazing and I was pretty happy but I noticed Windows getting insanely laggy and sluggish The mouse would stop moving every few inches and the keyboard would stop responding Instead of normal lag such as me typing this sentence nothing happening and then it appearing in full a few seconds later when the lag would catch up it would be a jumble of letters For example if I typed quot wow my computer is going slow right now quot it would come out quot wom mpui gin sright n quot That s a new type of lag for me as my PC has never had issues I assumed this was due to the death of the drive and Windows having problems recognizing it or reading it Sure enough when I disconnected it everything ran smoothly I have an iOmega TB external drive LDHD-UP - don t judge it was on sale that I m not too fond of but I use regularly for storage and backup I usually have it plugged into the back of my PC and this presents a whole other issue which I need another thread for but I ve dealt with it fine and it normally works all right However I found out it s USB compatible and my PC has outlets on the top so I wanted to keep it plugged into there But when I do that I experience that exact same type of lag as before when the internal hard drive was plugged in It s persistent and near-constant but it stops the second I turn off the hard drive I ve disabled antivirus I ve ran disckchecks I ve formatted none of it makes a difference Does anyone know what would be causing this with separate hard drives connected in completely different ways Any help would be greatly appreciated nbsp

A:PC laggy and sluggish when connecting additional hard drives

I don't know the answer but will comment about the issue of lag in typing. I have a wireless keyboard and mouse and I know when the batteries need replacing because the keyboard behaves exactly like yours and the mouse stops moving the cursor properly. Maybe your issue's connected with the power being drawn when you have the two drives connected. Don't rush out and upgrade your psu though. I only switch on my usb external hard drive for the occasions I need it.
 

http://www.techspot.com/community/topics/pc-laggy-and-sluggish-when-connecting-additional-hard-drives.207975/
Relevancy 17.63%

I am building a new system, only part used is the power supply. My motherboard can't detect my hard drive. I tried switching cables but it only detects my dvd drive. Any assistance will be greatly appreciated.
 

A:Can't detect hard drive

First make shure the data & power cables are plugged in securely, on both the MB and hard drive. and no there is not a power cable for the hard drive on the MB.
 

http://www.techspot.com/community/topics/cant-detect-hard-drive.207744/
Relevancy 17.2%

Is there any way of sharing hard drives/folder over the internet with the client side need to install anything.
I.e use add network location option in my computer
Or a client programme that is user friendly

The server side will need to run on my computer,
looked at FreeNas thats not an option,
Filezilla looks like it the best option server side of things but uses a client programe.

Im happy to run any programmes/OS's in a VM if that were needed.

Thanks in Advance
 

http://www.techspot.com/community/topics/sharing-hard-drive-over-internet-without-client-programes.207578/
Relevancy 14.62%

See picture below. Any ideas? Ive cleaned the rollers, and the main charger, and pretty much anything else I can find in the copier. Havent replaced the toner cartridge though. Originally there was toner all over the place and the dotted line was a solid black line. Performing the aforementioned maintenance items got rid of the thick black line but now this remains.

Any help is appreciated
 

http://www.techspot.com/community/topics/kyocera-km3530-copier-copy-problems.207362/
Relevancy 16.77%

I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
 

A:Recovering Lifelong Memories from Windows Recovery-Wiped External Hard Drive

There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
http://www.ylcomputing.com/content/view/350/153/
Obviously it's worthwhile trying both of them.
 

http://www.techspot.com/community/topics/recovering-lifelong-memories-from-windows-recovery-wiped-external-hard-drive.207350/
Relevancy 17.63%

I cloned my failing hard drive (a 160gb) to a new one (500gb). The installation seemed to go smoothly enough (it was my first time though) as it just required me to stay grounded and remove about 4-5 screws. When I loaded the PC up it wouldnt start the first time so I had to a Windows repair, which didn't seem to do anything except now it worked (it said it failed or something). I then had an issue with Windows 7 claiming to not be genuine although for one reason or another that stopped. Now my issue is that I am unable to access the additional memory of my new hard drive, I am able to access the cloned portion but not the rest (about 316gb). Any help would be appreciated, my PC is a Dell Latitude E6400 if that helps.
 

A:Inaccessible Memory on Cloned Hard Drive

Hello there,

It is absolutely normal not to see the rest of the free space in the moment. When you clone a drive you create the exact same image of old drive on the new one. This includes the size of the original HDD. However if you go to Disk Management ( type diskmgmt.msc in the search in the start menu and hit enter) you will see that you have one partition of 160GB and the rest of the space will be listed as unallocated. To use it you have two options ? you can create a second partition or you can extend the original one to take all the available space.

To create a new second partition just right-click on the unallocated space and select ?New Simple Volume?. This will starts a wizard to guide you through the rest of the process. First it will ask about the size of the partition. To use all the remaining space just type in the same value you have for Maximum disk space. Click Next.

Then you will get to choose and available drive letter to assign to this partition. Choose one and click Next.

Then you get to the Format partition window. You should choose ?Format volume with the following settings: ?. For the file system is best to leave NTFS. Allocation unit size as default. You can also put a label for the volume here. Then tick the box for ?Perform a Quick Format. ? Click Next. Then Click Finish. And you're done.

If at any point Windows pops up with the following message ?The operation selected will convert the disk to dynamic... are you sure you want to continue? ? click NO as this will most probably make your Windows unbootable and you will have to reinstall it.

If you want to extend the existing partition right-click on 160GB partition and select ?Extend Volume?. It will start the wizard and will only ask about how much space to add. Just select the maximum available space here and click Next, then click Finish. Once done your existing partition will be bigger and you'll be able to use all the space on your new HDD.

Hope that helps.
 

http://www.techspot.com/community/topics/inaccessible-memory-on-cloned-hard-drive.206835/
Relevancy 17.2%

My 320 GB Seagate external hard drive is detected but not showing up in my computer. What should I do?

In cmd> diskpart> list volume it does not show up. (screenshot attached)

In Device Manager it gets detected. (screenshot attached)

In disk management it shows up as 'unallocated'. If I initialize it, will I lose all data on the drive? It had 4 partitions. (screenshot attached)

In My Computer also it does not show up. (screenshot attached)
Even BIOS recognizes it.

What to do? I don't want to lose any data on the drive. If I initialize it in device manager will I lose data?

I was installing window XP on my computer, usually I remove the external drive but this time I did not. The external drive was shown as 4 drives in partition manager during installation. But the installation failed. The next time I was installing windows again, the external drive was shown as 1 single unknown or unrecognized drive. I'm not sure if it was unknown or unrecognized. I'm sure I didn't format it. So what I need to do now? I don't want to lose any data.
 

A:Seagate external hard drive not showing up in my computer. It is detected.

Yes, if you initialize it you will 'lose' everything. You will want to try something like [email protected] Recovery or maybe Easeus Partition Recovery.
 

http://www.techspot.com/community/topics/seagate-external-hard-drive-not-showing-up-in-my-computer-it-is-detected.205926/
Relevancy 15.05%

Hello,
I seem to have quite an annoying problem with my new 256gb razerbalde. Whenever I launch a game I get a black screen the sound still works but no response from the screen, I have to put it to sleep and back on again and it works even though sometimes I need to do it 10 times or so. I have updated to all the newest drivers and tried a secondary display through hdmi it gives me the following error message: failed to initialize renderer. Unknow error creating the renderer. I only tried launching skyrim so far. The error seems to happen sometimes but not often when I will start the laptop and the screen will be the same. It's more of a black/greyish color and you notice that it is on.
Any help will be of great use. If the post already exists I am sorry and would be happy to get the link.
 

http://www.techspot.com/community/topics/razerblade-problems.206284/
Relevancy 15.05%

I'm having trouble staying on line with telstra connection my internet keeps freezing and dropping in and out I have had trouble with my home line phone and have a bullion modem which this isn't the problem, the problem I believe lays with telstra as I've checked with my server and with downloads and updated my PC so what can I do next.
Thanks
June
 

A:Having problems with connection dropping in and out

June Lomas said:





what can I do next.Click to expand...

Call Telestra
 

http://www.techspot.com/community/topics/having-problems-with-connection-dropping-in-and-out.206048/
Relevancy 17.63%

My Buffalo HD which is actually a WD 500GB Hard drive. I opend it up and connected via SATA adapter but still the problem persists. I checked the drivers. Looked for clicking noise as in dead hard drive but none of those problems seems to be there. Also I tried formatting it but was unable to do so. Can anyone tell me whats the cause? It still may be the head problem but its not clicking as a dead hard drive does. It also seems to be spinning just fine but can't get to the root of the problem. Does anyone knows whats the problem?
 

A:Hard Drive Not Responding

Could be some issue on the PCB. Suppose if you were really dedicated to getting your data back you could buy the same drive off eBay or wherever and swap the boards. That may be more difficult to do since Buffalo may not have stuck to WD the whole time OR WD supplied a special series of drives to Buffalo. Check the model numbers to be sure before going that route.
 

http://www.techspot.com/community/topics/hard-drive-not-responding.206015/
Relevancy 17.63%

My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
 

A:Windows installation can't detect my ide hard drive?

Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
 

http://www.techspot.com/community/topics/windows-installation-cant-detect-my-ide-hard-drive.192208/
Relevancy 17.63%

I have 2 new external hard discs do show on my computer .They are running but not showing in PC.What to do ? Thank you
 

A:External hard drives not showing up

Hello,

I'm not completely certain that I understood your situation. I wonder if it's possible to clarify the question? Otherwise Disk Management is a good place to start looking for a missing HDD.
If the HDD is brand new you might need to initialize it. This is needed if below the disk it says ?Not Initialized?. Right-click on the Disk that says ?Not Initialized? and click ?Initialize Disk?. Then you will have the option to choose between MBR and GPT. If the drive is more than 2 TB you should use GPT, if not you could use MBR as well. Once the Disk is listed as Basic and online right click the unallocated space and click create a ?New Simple Volume?. For the file system choose ?NTFS? if you want to use the HDD on Windows.

Hope that helps.
 

http://www.techspot.com/community/topics/external-hard-drives-not-showing-up.205942/
Relevancy 15.48%

I have been having quite a few issues with the motherboard I have from ASRock. It is the Z87 Extreme4. My issue is the usb 3.0 No matter what I plug in it says this device can perform faster than this blah blah blah. Anyway, that should not be happening as I am plugging in usb 3.0 devices. What is going on? The other problem is that my front ports that are from the mobod header will no longer recognize any of my external 2.5 hdd. 1 on the back also says this so I am limited to just 3 ports on the back that I can plug into with my external hdd and they are very important to what I do. Is anyone familiar with this? Is this only on this board or a common thing among ASRock? I have other computers and the usb 3.0 works just great.
 

A:USB 3.0 Problems

Have u Installed the drivers? I do not know any thing about ASRock but lots of USB3 have to have the drivers.
 

http://www.techspot.com/community/topics/usb-3-0-problems.205957/
Relevancy 15.05%

I have been experiencing some serious FPS problems with my Laptop recently. I Used to run games at somewhere from 60-120 FPS, but now its dropped down to 5-14 FPS. It happened recently. A couple days ago on Saturday Oct 4rth, I was playing Team Fortress 2 on Steam. I shut off my computer to go to sleep for the night and when I turned on my computer the FPS problem started almost immediately after I turned on the PC. Its not just Team Fortress 2 either, Its happening to all of my other games also. I am not sure on what to do and the only though that comes to my mind when I wonder what the problem could be is a virus. (I have virus protection Webroot but I'm not sure if it works to well.) I might have to Factory Reset my computer, but I want to try different solutions before I Factory Reset. Any Ideas?

My Laptop Info: http://gyazo.com/f1acf76e4e8e9febcec1e6e62991b297

/
 

A:FPS Gaming Problems

Back up your important data and do the Factory Reset. Apply all the Windows Updates, and then try your games. Webroot is not an antivirus program. Try installing MSE:
http://windows.microsoft.com/en-us/windows/security-essentials-download
 

http://www.techspot.com/community/topics/fps-gaming-problems.205822/
Relevancy 15.05%

Hi all. Well I am having problems with turning on my Toshiba satellite c50-a-19t laptop. The night before there was a smell coming from the fan so I turned it off. I put it on charge in the morning and when it was fully charged I went to use it. The white light on the front goes on for a sec and then goes straight off and the laptop don't power up. Any ideas guys ???
 

A:Problems with laptop

Sounds as though it may have over heated and something may have shorted out. you will need to have it looked at your local repair shop.
 

http://www.techspot.com/community/topics/problems-with-laptop.204564/
Relevancy 15.05%

Hey.
Everytime I plug in the Ethernet cord to the router. It lights up and doesn't blink. After a couple of seconds, it just goes dark and I'm unable to use the router.

It works from time to time (I always have to unplug and it replug it back constantly) and I tried plugging in the router without the Ethernet plugged in and it looks like it works fine (Lights blinking). I plug in the Ethernet after that and it continues blinking for a few seconds then it darkens.

It's a Linksys router. WRT5462 V1 (Cisco)
 

A:Router problems -_-

Have you tried more than one cable? The cable could have gone bad.
 

http://www.techspot.com/community/topics/router-problems-_.204968/
Relevancy 14.62%

I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsp

http://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Relevancy 17.63%

So, when I built my PC I installed the OS on a HDD drive with the thoughts that I could later transfer it to SSD,

(did it before using hard drive cloning software to copy the OS drive to a new drive and then once working formatting the old drive.)

however when I started doing some reserch on cloneing software I noticed that windows 7 might not be cloneable (my past experiances are with XP) since there are mixed reviews on each bit of software out there both on Amazon and on the web. sevral report that windows 7 sees the clone as an unlicenced copy and refuses to boot. others say the clone drive misses it's boot file.

can some people advise me on if any of these facts are true or not?
 

A:Hard drive migration to SSD questions

Hi.
Cloning should work fine if you do it properly with windows 7. It's possible that windows can throw up a licensing issue, but very unlikely. In the event that it does, call Microsoft and they should be able to get it sorted out for you.

As for the bootability of the drive, cloning the drive's data does not necessarily make it bootable, but if you look online you'll see some cloning tutorials that include a section for rewriting the MBR on your SSD to make it the primary bootable drive in case it ends up not booting properly. This isn't hard to do and usually isn't a necessary step.

Also just keep in mind that simply cloning the SSD will probably result in an unaligned drive, so make sure that you get it properly aligned. Some cloning software has an aligning option built into the cloning process that you'll want to select.

So go for it and come back if you're having any issues.
 

http://www.techspot.com/community/topics/hard-drive-migration-to-ssd-questions.204382/
Relevancy 17.63%

Sorry I must not have sent the last post correctly I am new to this site So I will try again I was getting ready to upgrade to bigger hard drive or drives Before doing that I needed to take the old hard drives out to obtain some information off the labels I did so and while they where out I cleaned the Mounting slots a little better than using just No drives to SATA Power hard air Having done that I re-installed them both When I turned on the power button the button lit up and the fans were running But No Power to SATA hard drives it No Power to SATA hard drives does not seem that the hard drives are getting any power as I can t hear or feel any thing Plus the computer is not booting No Power to SATA hard drives I don t recall unplugging anything other than the two hard drives But I also notice that I have a short cable bundle with two white plugs with three pins and one empty pin hole on the other end a black connection with with five connector slots with one middle on blank That makes me think that I unplugged the power to the hard drive someplace along the ling As I have a wire bundle that has two SATA power connectors that are plugged in But their are three white female plugs marked P P and P which are not connected to anything in that wire bundle I don t know at this point if the power comes through that bundle from the power source Of if I do not have the power plugged into the lope I hope that somebody can help me figure this out and let me know if I burnt out the hard drives and have to start over with my recover disk reloading windows and going from there nbsp

A:No Power to SATA hard drives

How would I close this post out. Dumb me had the monitor plugged into an unused VGA port. It only took me two and a half days to figure that out. I wanted to let others know to check and see if they have everything plugged in where it should be. Including the VGA or other monitor cables.
 

http://www.techspot.com/community/topics/no-power-to-sata-hard-drives.204843/
Relevancy 17.63%

Hi, I have a Verbatim Store n' go ex hard drive which used to work perfectly with usb 3.0 and 2.0. A few weeks ago it stopped working with 2.0 and now not even with 3.0. When I plug it in the hard disk starts to rotate and lights up normally, but is never shown on the drive list. The computer doesn't even do the beep sound when a usb device is connected. I tried on 2 different pc's but they show no result.

Any kind of help is greatly appreciated
 

http://www.techspot.com/community/topics/external-hard-drive-failure.204788/
Relevancy 17.2%

Hi Frnds

I hav a Toshiba 1 TB external HDD. It was working fyn till today. Now it is not showing in My Computer or Disk Management. It does make the sound when I connect or disconnect it from the laptop. and the HDD light remains on.

Please advise how to fix this

Thanks
 

A:Toshiba external USB hard drive not detected in any laptop

Go under the Device Manager and uninstall all the USB Controllers then reboot your PC don't connect the 1 TB just yet. Make sure nothing is connect to those ports like a keyboard or mouse otherwise they'll lockup. Once rebooted Windows will rebuild the table for USB Controllers. Now you should be all set. Unless you have some sort of conflict with IRQ or Registry setting. There is a free app called USBDVIEW what you would do is disconnect from all non-disconnected USB devices that are stored on the PC these settings can cause all sort of issues.
 

http://www.techspot.com/community/topics/toshiba-external-usb-hard-drive-not-detected-in-any-laptop.173740/
Relevancy 17.63%

My bother had deleted my laptop partition files and folders when attempting to extend my C partition. All my stored partition movies were lost and could not be found in Recycle Bin. Do you know where these partition videos are? I really want to view these videos again. What can I do to rescue them? Thank you for any advice!
 

A:Delete hard drive partition data

Hey, Luminaton03!

Sorry to hear you are experiencing such an issue.
Your data is stilll there somewhere as long as you don't overwrite it. If you save new data, it would rewrite your previous files.
I did some research for you and I found a threat that you might find helpful:
http://answers.microsoft.com/en-us/...back-the/a003d747-b760-42a7-819b-0235e8ec6d2c

I really hope this works for you!
Good luck!

SuperSoph_WD
 

http://www.techspot.com/community/topics/delete-hard-drive-partition-data.204583/
Relevancy 15.48%

Hey so I wasn t really sure where to post this as I am quite new to the forums but here I go So my first problem is with my laptop s adapter charger not really sure what it s called in english it no longer charges as in the tiny green light no longer turns on when I connect it to problems Two an outlet and yes I Two problems have tried more than just one outlet It s dead From what I ve read on the web I suppose the only way out is buying a new charger Or trying to open the charger box and fixing it Is that possible If so any tips on how to do that - My second problem is releated with the internet modem I have cable internet and after this storm a coupel of days ago it started playing tricks on me even though the cable is plugged into the pc and the modem is working for about a whole minute my pc says that the cable is unplugged and only after that does it recognize it and connect me to the internet Any ideea what s wrong I suppose there s fault in my modem because before when it worked just fine about three green lights turned on right after turning it on but now only two do the dsl and power one I don t know fpr sure but I think the third one used to be ethernet And that s about it If anything s unclear please ask english is my third language so I might have made some mistakes here and there thanks for your time nbsp

A:Two problems

DO NOT open that "charger box." It is dangerous to do so because it can hold a charge of electricity for quite some time. Either buy a new charger from the laptop manufacture or, if you can, purchase a new charger from the likes of Targus. I have a Lenovo laptop and bought the Targas brand as a back-up. It works great and Targus supplies several adapters to work on many different brands.

Secondly, was your modem and router plugged into a surge protector or do you have them plugged directly into the outlet?

Your English is quite good.
 

http://www.techspot.com/community/topics/two-problems.203854/
Relevancy 15.05%

Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
 

A:Dvd burner problems...any suggestions

They are so cheap now it is probably worth everyone's time to just get a new one.

If you really want to troubleshoot it, put it in a different computer or OS.
 

http://www.techspot.com/community/topics/dvd-burner-problems-any-suggestions.204100/
Relevancy 17.2%

I recently bought a external hard disk of WD (My Passport Ultra) 1TB. It was working fine untill now. Now there is a problem going on. I have used only 656GB of space but it now show that I have only 4GB of storage left. Earlier it was showing 257 GB of space left from 913GB but now it shows the above. I can't understand what is the problem. If anybody could guide me it would an immense help. Thank you.

Bodhiswattwa Tewari
[email address removed]
 

A:Problem With My Passport Ultra external hard disk by WD

Maybe @jobeard could help here. What OS are you running? OS X or Windows?
 

http://www.techspot.com/community/topics/problem-with-my-passport-ultra-external-hard-disk-by-wd.204228/
Relevancy 18.06%

Hi I have bought a laptop for my daughter its harddrive is 750gb but when I found it it is two hard drives.one initialled OS and the other data how is this supposed to work.regards Martin
 

A:Two hard drives

I know some manufactures have different ways they produce their setups, but most of the time its a partition and not another hard drive. What it does is store the System Backup / Restore on one partition so that you can reset the laptop to factory settings and the main "hard drive" (usually C prompt) is the partition you use on a daily basis. Unless you physically looked inside the laptop and saw 2 different hard drives, it should be just one hard drive that is split partitions. What is the make and model of this laptop? We can determine what setup you have with that information.
 

http://www.techspot.com/community/topics/two-hard-drives.204210/
Relevancy 17.63%

I'm trying to partition my hard drive, when I click shrink, it takes me to the shrinking window and it says:

Total size before shrink: 704749 MB
Size available to shrink: 7185 MB
Enter the amount of space to shrink: 7185 MB
Total size after shrink: 697564 MB

I don't understand how I have so much space, but I can only shrink it 7185. It is an NTFS.
Here's some screenshots
 

A:Why can't I partition my hard drive more?

Some files that are read only are preventing you from shrinking beyond a certain point while those files are open.

My suggestion would be to use partitioning software that is bootable. Boot to the disk and shrink your partition without windows running.

There are several freeware apps available to select from. The one I use is Partition Wizard Boot CD.
 

http://www.techspot.com/community/topics/why-cant-i-partition-my-hard-drive-more.204093/
Relevancy 15.05%

Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
 

http://www.techspot.com/community/topics/having-problems-with-my-dvd-burner.204090/
Relevancy 17.63%

My hard doesn't show up anymore.when I plug it in I hear 2 beep sounds coming from it and then nothing.any one now what the problem might be.
 

A:WD external Hard drive

Probably an internal hardware failure on the drive. Hope you had your data backed up from that drive.
 

http://www.techspot.com/community/topics/wd-external-hard-drive.203951/
Relevancy 17.2%

Tried just about everything but I still can't seem to get my external hard drive to show up in my disk management or computer. It say it's installed and ready to use but I don't see it.. only in the device manager and in devices and printers I can see it.. but nowhere else.. I'm working with windows 7 upgraded from windows xp but has be downgraded which was originally windows vista I think.. A friend gave me a computer and I had it upgraded.. can any one help me get my computer and external hard drive straight. Thanks.
 

A:Don't see my external hard drive in disk management or on computer

Check this thread out: http://goo.gl/rxkBN
 

http://www.techspot.com/community/topics/dont-see-my-external-hard-drive-in-disk-management-or-on-computer.203836/
Relevancy 17.2%

The Seagate Momentus 5400.6 hard drive I'm using is from my old laptop it has 4 disks.
After I put it in the (IT-CEO IT-700) enclosure, and connect it to my new laptop it does not show up in 'My Cumputer' and 'Disk Management', but displays in the 'device and printer' section of control pannel.
I also can't eject the hard drive, even when I'm not doing anything to it, the (IT-CEO IT-700) enclusre's blue signal light just keeps flashing for a while then goes off for a sec, then resume flashing again.
My laptop also keeps trying to install the hard drive.

I tried reinstall the hard drive's driver, but that did not solve the problem.

Please Help.
 

A:External Hard drive not showing up in 'My Computer', and 'Disk Management'

Have you tried using different drive enclosure other than the IT-CEO IT-700?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-up-in-my-computer-and-disk-management.201875/
Relevancy 17.63%

I have a Dell Precision T which I just purchased off of Ebay Recognized Possible Hard Formation, Second Not Drive Raid It came with gb of ram and gb hard drives installed In quot my computer quot it shows drive quot c quot but not the second drive This computer supports raid configurations but when I received it it had no operating system installed I installed windows ultimate bit This computer has quad core processors and I have been noticing a Possible Raid Formation, Second Hard Drive Not Recognized slower response time lately which leads me to believe it may be in one of the raid modes even though they are supposed to be faster most of the time Possible Raid Formation, Second Hard Drive Not Recognized I went into the bios and the setting it is on is to automatically detect raid configuration in the drives and if not detected the regular mode I read some information about raid setup and cannot find the software quot Intel Matrix Storage Console quot on the computer to help verify or change settings Could this be an extra program like drivers that are downloaded from the Dell website because they don t normally come with a regular windows install If someone is familiar with configuring raid formations could you please help me determine what my system is set on and how to set it properly I would be satisfied to not have raid active as I don t need that kind of constant backup My work is not that important I can back up important files in other ways nbsp

A:Possible Raid Formation, Second Hard Drive Not Recognized

What shows up in the Disk Manager vs the Device manager?
 

http://www.techspot.com/community/topics/possible-raid-formation-second-hard-drive-not-recognized.202015/
Relevancy 25.8%

I'm wondering whether I can overclock my ASUS R500VD notebook it has an INTEL sandy bridge core I5 3210M 2.50 GHz processor 4GB (max 8) of ram running puppy linux and windows xp home edition SP2 32 bit I have benchmarked it and ill email the results to anyone who replys and gives me their email and if you're wondering why I'm running windows xp read my article in the Alternative OS section of the forums called "If all else is too hard try puppy linux" bye
 

A:Can I overclock my asus notebook 17"

Nope sorry, the I5 3210M isn't OC enabled.
 

http://www.techspot.com/community/topics/can-i-overclock-my-asus-notebook-17.202019/
Relevancy 17.63%

My External hard drive wont open without format I try doing format it gets stuck I try opening computer > mange > disk management it wont open unless I take it out and gets stuck and gives me connecting to virtual disk service
please please help me! im freaking out I need this hard drive to work I need help
 

A:External hard drive

If you need this drive because there is data on it, formatting is the last thing you want to do.
 

http://www.techspot.com/community/topics/external-hard-drive.203628/
Relevancy 17.63%

Recently a hard drive named OS (X: ) (space inserted so it isn't posted as a smiley face) appeared in my computer. It seems to be identical in memory to my actual hard drive, but is actually empty. What exactly should be done about this?





 

A:Empty extra hard drive?

Not sure off hand but I'd open up Disk Management to see what it says there.
 

http://www.techspot.com/community/topics/empty-extra-hard-drive.203533/
Relevancy 17.63%

Hello,

Old Dell computer running Windows XP that was never backed up and I am trying to recover files and photos. I get NTLDR is missing when I boot. I've used Testdisk/Photorec to try to recover my data but when going through the recovered data it seems to be all system files that I know nothing about. I used Ubuntu on the Dell to run Testdisk. I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.I also ran a NTLDR boot disk but ended up with the same NTLDR is missing message. I dont have a XP recovery disk. Anybody that has had this issue please help!
 

A:NTLDR is missing. Hard Drive Failure.

Trobles86 said:





I also hooked up the hard disk to my laptop with a hard disk adapter and got the same results.Click to expand...

If you have access to another PC or laptop then you can connect the hard drive in to that machine and get the files you wanted to recover from your hard drive in there.
 

http://www.techspot.com/community/topics/ntldr-is-missing-hard-drive-failure.203104/
Relevancy 25.37%

Hello everyone,

I have an Hp Pavilion that I got about 2 years ago and I do play games on it. One game in general which is League of Legends. My concern is that if anyone knows about this game during teamfights when the computer is operating extensively because of all the action going on I always frame lag. My frames drop only during fights. When nothing is happening my frames are okay. As well other programs on my computer run slowly now as well like windows media player and just when I'm starting programs up on my comp. This happened now so long ago and it was a sudden change. I don't know what to try anymore. I have reformatted my comp and still the same issue. Help would be much appreciated thank you.
 

A:Hp Pavilion Dv7 FPS drop during games

The HP Pavilion could be over-heating. After years of use, the CPU's thermal pads and paste become hardened and this causes the CPU to run hotter and hotter causing game play to suffer
 

http://www.techspot.com/community/topics/hp-pavilion-dv7-fps-drop-during-games.203061/
Relevancy 17.63%

Please help my segate external hard disk 500 gb not working all of the solutions are not working please any solution but not that solution of computer manage please help and replay fast

windows 7 (64)
 

A:Seagate external hard disk

Man... that sucks. If ALL solutions are not working you are screwed.

Please read the link in my signature and try again.
 

http://www.techspot.com/community/topics/seagate-external-hard-disk.203299/
Relevancy 17.2%

I am a beginner of hardware. I find two series of SSD to compare, 840 EVO and M500, because the specifications and the prices of them are approximate.

Both of them use SATA 3, so you need to compare with the read speed and the write speed, if you prefer faster one. The sequential read speed of 840 is 540MB/s, and the sequential write speed is 410MB/s. M500 is slower, but the performance of M500 is great as well, its Shock-resistant design makes it more durable than 840. The most important thing of SSD is the controller, 840 uses 3-core Samsung MDX controller, M500 uses Marvell?s latest controller, maybe the second one is better.

This is my poor review, how to compare them with more details, give me your advice.
 

A:The comparison of hard-state-drive, Samsung VS Micron

Read in-depth reviews such as this:
http://www.techspot.com/review/709-samsung-840-evo-ssd/
 

http://www.techspot.com/community/topics/the-comparison-of-hard-state-drive-samsung-vs-micron.202945/
Relevancy 17.63%

I have a Western Death Disk Hard After Click of Digital Gig Drive which experienced the Click Of Death Hard Disk After Click of Death while accessing the drive It took out the last gig of the drive The first half on Check Disk works perfectly But when check disk attempted to go through the section where the COD hit it jammed the program and stopped saying it wasn t able to repair the area The drive was used for music storage in an automation system I partitioned the damaged area off so it cannot be used or accessed When the drive was connected to the last system I had it in the system s SMART said to quot back up all data that failure was eminent quot After partitioning off the ripped up area of the platters is it possible to use this drive as a slave only I may be coming off sounding like a mad scientist with this thought But if it s possible at all to continue using this drive I d love to use it for storage only No OS and keep the partitioned area marked off so it s no longer accessed what so ever I m I barking up the wrong tree with this thing or is it still able to work All data which was on it before the damaged area was saved easily The good section still works and saves data without issue Just curious about this If it works I ll use it if not I ll replace it and use it for a paperweight nbsp

A:Hard Disk After Click of Death

Ray G said:





I partitioned the damaged area off so it cannot be used or accessed. When the drive was connected to the last system I had it in, the system's SMART said to "back up all data that failure was eminent".Click to expand...

My experience with drives has been exactly as the Smart warning. Once the drive starts to fail, it will not stop deteriorating. I would say the drive is history and should not be trusted further, not even as a slave.
 

http://www.techspot.com/community/topics/hard-disk-after-click-of-death.202992/
Relevancy 24.94%

Hello all,

I've recently bought a HP Pavilion 15-n252sq laptop, with Free Dos - unfortunately I can't install Windows 7 over it, due to the following error I keep receiveing in the Installation screen:

"Select the driver to be installed" - and regardless of the paths I have and the available folders, I can not seem to proceed wtih the W7 installation.

Please notice that, I've tried to use both a W7 DVD and also a bootable USB drive (and yes, connected in the USB 2.0 port and not USB 3.0 ) - but I always get to the same point where I have to select drivers.

Please also notice that the BIOS doesn't allow me to make any modifications except for some minor ones (like select boot priority, or enable USB 3.0), as the rest of the MAIN features are greyed out .

Can anyone please help me with this issue?

Regards,
Adrian
 

A:HP Pavilion 15-n252sq - Can not install Windows over Free Dos

You may have to use a program Like KillDisk to reformat the drive. Then try installing your Win 7 DVD.
 

http://www.techspot.com/community/topics/hp-pavilion-15-n252sq-can-not-install-windows-over-free-dos.202523/
Relevancy 17.63%

Hello all!!!! My name is John. I am trying to find some help with an issue that arose after I installed a new hard drive in my computer. I started getting a message that stated:

C:\Users\Owner\App Data\Local\Conduit\API Support\API Support.dll

Anyone know how I can repair this? I saved an image of my system before installing the new hard drive and then just downloaded the image to the new hard drive. HELP!!! please!!
 

A:Installed new hard drive

You might just need to run some registry cleaners to fix and remove those corrupt registry keys.
 

http://www.techspot.com/community/topics/installed-new-hard-drive.201991/
Relevancy 17.63%

My computer recognizes that the hard drive is there as local disk E but wont actually load. I can get it to load on my tv but it wont play my movies. Please help it has a lot of important things on there,
 

A:External Hard drive not loading

You could try running chkdsk /f in command prompt to check and fix errors on your drive.
 

http://www.techspot.com/community/topics/external-hard-drive-not-loading.202166/
Relevancy 17.2%

I have had a look round the posts but nothing I try stops the internal drive getting accessed.
I have unchecked the CD autorun using TweakUI (this worked for someone else)
I have temp disabled AVG along with BoostSpeed and Team Viewer
The only process running apart from sys idle is svchost.exe (1%)

I hope someone out there manages to work their magic as they did the last time I posted here!
Thanks
 

A:Hard drive light flashing with nearly no processes running

Sounds like the System Index service is running.

When you find that happening, disconnect from the Internet to be sure MS Update is not running or something on your system is phoning home to be sure.

To see all Internet connections from your PC, grab a copy of CurrPorts - - runas admin and you will see everything. Click on the column heading Remote Host Name to get active connections at the top if the list. The menu Options is used to customize the display; here's my list

display Listen, Established, TCP, UDP, IPv6,

display port in The Address,

sort on refresh,
Ask Before Any Action
That last one is interesting; running as admin, you can Close a port or Kill the application with that port.

CurrPorts identifies all ports on the pc (mine number 112 as I write) and if I select all ports with a Remote Address, I see I have 20 connections.

btw: Remote Addresses shown as 127.0.0.1:nnn are local services (like a proxy or AV service), so out of the 20, only two are actually remote - - both HTTP browser connections.
 

http://www.techspot.com/community/topics/hard-drive-light-flashing-with-nearly-no-processes-running.202265/
Relevancy 26.66%

Guys I am looking for a new notebook, and I have general idea of what I want, but I am unable to find anything comparable so far (in reasonable price range, I.e. about 1,500$). Here are the specs which I've in mind:

i7 47xx Processor
8GB RAM (or higher)
GT760M (or similar range GPU)
SSD Boot drive + 1 TB HDD
15.x 1080p display
Windows 8.x64

I have no preference for any brand, although, in last few years I've bought HP notebooks, generally because I have good connections there in case there is some issues
 

A:A New Notebook

Specify dual or quad core CPU.
 

http://www.techspot.com/community/topics/a-new-notebook.202094/
Relevancy 25.8%

I m officially out of ideas and I m hoping you kind way of operating notebook system No on installing folk here could help me out I have a Hp notebook whose hard disc I formatted while transfering data from it to my computer so I could do a fresh OS When I returned the hard disc into the notebook I found No way of installing operating system on notebook that I could not install Windows by any medium I tried plugging in an external DVD reader and installing windows like I did the first time on this notebook but No way of installing operating system on notebook it would not read from the device BIOS recognises it only as USB LEGACY SUPPORT When I tried installing windows from an USB like I did many times on my computer the screen would freeze when I pressed any key to No way of installing operating system on notebook boot from USB I tried changing USB ports for the devices I used it did not help and I tried changing USB memory sticks from which I booted but alas no success I don t know if there is a way of transfering the files from the dvd onto the hard disc make it bootable somehow and then install the OS on the hard drive the same one I also tried installing other OS using the same methods Windows and XP but have had the same problems P S I haven t tried preinstalling a system on the hard drive on another computer and then inserting the HD into the notebook hoping it would boot I tried that once on a comuter and have had no success Please do help cheers nbsp

A:No way of installing operating system on notebook

Does this help ?
http://h30434.www3.hp.com/t5/Notebo...all-Windows7-on-HP-2140-using-USB/td-p/301650

or this ?
http://www.suren.net/2010/03/11/installing-windows-7-off-a-usb-drive-on-an-hp-mini-2140/
 

http://www.techspot.com/community/topics/no-way-of-installing-operating-system-on-notebook.200793/
Relevancy 14.62%

I have a toshiba satellite pro and usually use the touchpad with my right hand rather than a mouse. I attached an external mouse for my daughter to use, and changed the settings to lefthanded. I disconnected and shut down. Since then, each time I restart the computer, the touchpad does not work correctly. Instead of double clicking on the touchpad, I have to rightclick. I have to go into mouse settings on control panel, and move the double click speed, click apply and then the touchpad works correctly then. Why is this? Please help.
 

http://www.techspot.com/community/topics/touchpad-problems-after-using-left-handed-mouse.201828/
Relevancy 17.63%

I have to say I am a little worried about my hard drive. Often I bought it for the purpose to protect my game videos, and some program files. For a long time, it behaved rightly with my HP windows 7 desktop when directly used. Sometimes ago I decided to let this old PC alone and bought a Macbook pro. The latter has no such a SATA interface for me to input the data from this drive. For the convenience, I borrowed this SATA dock from my brother . ( I have to admit previously I once use another dock to exchange the data . )

My mac just could not recognize my drive as a normal one. I am not sure where the problem lies in. The key is that other drives have no similar issue with this dock. I wonder if anything happen before in the process I handle the data with another dock.

Grateful for any advice.
 

A:Previous WD hard drive 500GB could not be recognized as it always

Yeah. At present I have no such another one to have a try. I will turn to my friend see if any gadget he has to test my drive.
 

http://www.techspot.com/community/topics/previous-wd-hard-drive-500gb-could-not-be-recognized-as-it-always.201163/
Relevancy 17.63%

Okay not really very good at this but my laptop stopped working so I took hd out and connected it to anotherlaptop through usb lead it appears in my disk management (although it shows up grey instead of black or blue if that makes sense to anyone) but it wont show in my computer I have a load od family photos on this drive and would really love some help and will send out good karma to all who try to help me many thanks in advance
 

A:Trying to recover data from crashed hard drive

Hi techmichellenot. When you say it stopped working,is there anything on the screen when you power up, or any indication that the system passed it's POST procedure (Power On Self Test), usually indicated by a beep before Windows itself tries to boot up?. Any error messages seen?. Sounds like you put the drive in an external case that can connect via USB. If there is indeed a problem with the disk drive and it's not a physical problem with the drive (maybe a corrupted Windows boot file,etc),your system may have a Recovery procedure that will reinstall your OS without erasing your data files (called a non destructive OS reinstall) as opposed to a destructive which erases everything and reinstalls the OS. I would check your documentation to see if your laptop has such a procedure.
 

http://www.techspot.com/community/topics/trying-to-recover-data-from-crashed-hard-drive.189487/
Relevancy 15.05%

Hi So my HTC just old Nokia Problems 7360 spare with got stolen so I had to dig up my old spare phone it s a old Nokia and it works somehow I can call and I can txt but I can t save any new contacts it just says something like quot forbidden action quot anyhow I can t copy old contacts from the Problems with old spare Nokia 7360 phone to the sim card I can t delete old contacts so I was going to reset the whole thing but I have changed the security code by default it should be and I can t remember what I have changed it to and yes I have tried all the possibilities that there are So what to do -any ideas P S It also says that the memory is full and it can t save any MMS WAP what nat settings EDIT Have got it connected to the computer now with a data cable and using Nokia PC Suite and I made a backup of everything just in case but Problems with old spare Nokia 7360 it failed to backup the contacts so I tried to just open and view all the saved contacts but it just fails Anyhow I m not really interested in the old contacts so I don t mind but when it fails to read the contacts it also fails when I try to add new contacts via the computer Next step was to download Nokia Software Updater that s also what the PC Suite suggested but it can t quot find quot the phone when it s connected So what next -I could send it to Nokia so that they there would flash it but then if there is some other problems with it it would cost a fortune and it s not worth it nbsp

A:Problems with old spare Nokia 7360

You need to go in the nearest nokia care point at your place. You can also go to unauthorised repair shop for reformatting or reflashing.
 

http://www.techspot.com/community/topics/problems-with-old-spare-nokia-7360.171731/
Relevancy 15.05%

Hello, yesterday I was using my computer and I shut it off. When I came back a few hours later, the wifi couldn't connect, and, unlike most times life this, it displayed an ethernet symbol with a red 'x' opposed to the normal wireless symbol with an 'x'. My computer stopped connecting to any wireless, though works fine with ethernet.

It is a Lenovo Ideapad with Windows 8

I've tried rebooting (I'm clueless, but not that clueless), updating the OS, uninstalling and reinstalling the computer's drivers along with some more far-fetched stuff (I got desperate) such as removing the battery, waiting a few hours, and plugging it back in, but nothing has worked.

If anyone can help, that would be amazing, thanks!
 

A:Internet problems on my Lenovo

trekzone said:





Hi,

Seems your WIFI adapter is being disabled. try enabling the device in your device manager or with the Fn+function key provided in your laptop.Click to expand...

That doesn't seem to be the problem, the adapter is enabled and the computer is not in airplane mode
 

http://www.techspot.com/community/topics/internet-problems-on-my-lenovo.201378/
Relevancy 17.63%

Hi All,

I have WD 1 TB passport, and all its operations are very very slow.
I cant use it at all. I have all the important documents in it.
Please someone help me out here.

Regards,
Sanoop.
 

A:WD hard disk all operations very slow

The only thing I can really recommend is to defragment the external HDD using a program such as Defraggler.

If that doesnt help, you may have a virus on the HDD, in that case, I would recommend posting in the malware forums.
 

http://www.techspot.com/community/topics/wd-hard-disk-all-operations-very-slow.201315/
Relevancy 15.48%

I recently bought a new Motherboard for my PC, it is a GIGABYTE GA-F2A88XM-D3H, it has a USB 3.0 plug in. However even though I plugged my USB 3.0 plug into it I still have no use. These are my front USB 3.0s, although the sound and mic work fine in the front. I currently am using a Windows 8 64-bit computer and have all drivers up to date, I am wondering if there is a way to turn it on in the BIOS.
 

A:USB 3.0 Problems

It seems to me like you are plugging the USB 3.0 device into the front of your case. If they are not working, it means you probably never connected the USB 3.0 header plug from the motherboard into the case plugs.

This is what I am talking about BTW:


Just to clarify though, you are trying to connect your device using the front case USB plugs? Also, if you plug the USB 3.0 device into the motherboard directly (in the back of the case), does the device work?
 

http://www.techspot.com/community/topics/usb-3-0-problems.201213/
Relevancy 18.06%

Hey Guys. I would like to upgrade my computer. I've got a 40 GB HDD right now. Is it possible to add another 80 GB HDD to my computer? If so, how? Could I use both the HDDs?

Another question. I've got 512 MB RAM right now. And they are of PC2700 type. Is it possible to remove them and add PC3200 type RAM? And while inserting RAM, is it true that we should put it in sets of two? I mean if I want 1 GB RAM, could I put 2x 256 MB and one 512MB or should I put only 4x 256 MB?

Thanks
Amal
 

A:How to add new hard disk and RAM?

A general rule of thumb but not an absolute is, you can put in better RAM. RAM will simply down-clock to the highest settings the motherboard supports. But like I said though, it is not an absolute, as you can still find incompatible RAM.



amalsk said:





Hey Guys. I would like to upgrade my computer. I've got a 40 GB HDD right now. Is it possible to add another 80 GB HDD to my computer? If so, how? Could I use both the HDDs?Click to expand...

Before we can answer with a direct answer, we need to know if you are working with IDE and/or SATA ports. I'm certain your machine is IDE, but I'm not certain it has free IDE and/or SATA ports. Short answer is yes you can, it all depends on the availability of port and finding a drive that will connect.



amalsk said:





Another question. I've got 512 MB RAM right now. And they are of PC2700 type. Is it possible to remove them and add PC3200 type RAM? And while inserting RAM, is it true that we should put it in sets of two? I mean if I want 1 GB RAM, could I put 2x 256 MB and one 512MB or should I put only 4x 256 MB?Click to expand...

Your machine likely doesn't support Dual Channel Mode. I'm almost positive DDR memory doesn't support Dual Channel, but I'm not going to swear to it. If that is the case then it wouldn't really matter as long as the RAM is compatible with your system. The best way is to stay with RAM you know is compatible or is recommended for your board. Dual Channel though is the main reason, you would want matched RAM modules. With all that said, I personally always like keeping the same speed modules regardless of whether they needed to be matched.
 

http://www.techspot.com/community/topics/how-to-add-new-hard-disk-and-ram.201047/
Relevancy 25.37%

I have an ASUS MeMO Pad 7 inch non HD keep that in mind total different situation. But I cannot Factory Hard Reset it by using any normal button combinations or reset button. I have done a lot of research but have come up empty. The reasoning behind the need to perform factory reset is the number pin to log in was forgotten. Yea, yea I know I should not use it but it happened so non the less any ideas?

Vedrneronomous
 

A:Asus MeMo Pad 7 Inch non-HD will not factory reset

So you can't get to the factory reset menu? Holding the power button will turn the tablet off right?
This might help:

 

http://www.techspot.com/community/topics/asus-memo-pad-7-inch-non-hd-will-not-factory-reset.200868/
Relevancy 17.63%

Hi all I have custom built pc and in last month now and then it switches off I believed it to be a faulty psu but now ive notice blue screen couple of times I looked it up and it points to faulty hard drive .also on restart I get few chkdsk .so I thought ok I got spare harddrive ill clone main one on to that and use that but when I plug it in it shows up but making a weird noise, also secured by bit lock,, I put password in and then it dissapears with error something like cannot be specified ...does this mean both hard drives have failed or could it still be psu maybe not giving enough power..thanks in advance.. any more info please ask
 

A:Hard drive fail

A noise coming from the hard drive you replace is faulty,,, it's indicates mechanical failure..you better buy new one...
 

http://www.techspot.com/community/topics/hard-drive-fail.200737/
Relevancy 17.63%

HELP!!!

I have a 500gb external hard drive which, up until a few days ago, was working absolutely fine.

When I would plug it in to my laptop the device was found under 'my computer'.but would not open. Instead when I tried to open it my computer froze and the 'not responding' message was shown, resulting in a forced close of my computer. Now when I attach the hard drive and open 'my computer' the hard drive does not show at all, but 'my computer' still shows the message 'not responding', resulting in a forced close.

I've been on to a couple of forums already and tried the route of right clicking 'my computer', 'manage' and 'disk management'; but the hard drive does not appear there.

I'm at a total loss what to do and would massively appreciate your help as I have backed up company data on to this hard drive.

Thank you in advance!
 

A:External hard drive not showing in My Computer

Hey pcrquals. I would try the drive in another pc to narrow down where the problem is, a problem with the drive itself, or a problem with the pc recognizing the drive, which might be a problem with the USB port(s) or with the USB drivers. Does another USB device like a flashdrive work when plugged into the same port?
 

http://www.techspot.com/community/topics/external-hard-drive-not-showing-in-my-computer.191206/
Relevancy 15.48%

I recently bought GLADIATOR R7 260X Intel i5-4570 3.6GHz Quad Core Next Day Gaming Pc - Aria PC from Aria,it comes with CORSAIR CX series CX430 430W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply - Newegg.com and every so often the monitor goes off which I think may be due to a lack of enough power. Would it be beneficial to change to a Antec TPQ-850 850W Continuous Power ATX12V / EPS12V 80 PLUS BRONZE Certified Modular Active PFC Power Supply - Newegg.com that I have spare?

Thanks
 

A:Possible PSU problems

If you have the PSU as a spare, there is no harm in using it to see if it corrects your problem.
 

http://www.techspot.com/community/topics/possible-psu-problems.200393/
Relevancy 15.05%

I have a laptop with the Realtek high definition audio and Dolby home theater installed. After the latest win8.1 update the Realtek program has stopped forwarding the sound through the Dolby program (which it managed to do perfectly before the upgrade). I tried using Viper4Windows too but that didn't work eighter. Is there an option anywhere that will allow me to fix this?
 

A:Realtek and third party program problems

Are there any yellow (!) in the device manager?
 

http://www.techspot.com/community/topics/realtek-and-third-party-program-problems.200237/
Relevancy 17.63%

I have an external WD hard drive, I accidently removed the network file and folder sharing componet. Now when I go to access my hard drive it tells me that access is denied. I dont want to lose the data. Is there a way to restore this opion and gain access? PLease help. I oringially was trying to limit access to this hard drive.
 

A:WD external hard drive

Google How to Take Ownership for the instructions your version of Windows. Try taking ownership of files/folders on the drive
 

http://www.techspot.com/community/topics/wd-external-hard-drive.200328/
Relevancy 17.63%

You saved an old hard drive (or three) from previous computers and now you?d like to get at the data on them. Is there an easy way to access the data without cracking open your current computer and mounting the hard drives inside?

Read more
 

A:How to Get Data Off an Old Hard Drive (Without Putting It in a PC)

very good. I was trying to explain this to someone. Now I think I will just send then the Web Page.
 

http://www.techspot.com/community/topics/how-to-get-data-off-an-old-hard-drive-without-putting-it-in-a-pc.200129/
Relevancy 17.2%

I've been having this problem for a few months now. I recently built my own computer, having been on a lap top for a couple of years, and found my old external hard drive. I plugged it in to the new computer, and it said something about needing to be formatted, which I promptly did due to nothing of importance being on it. I went to sleep, and woke up to see that it couldn't be formatted.

This is where my issue begins. It no longer appears in Computer, or Disk Management. Disk Management won't even load if I have the drive plugged in. There seems to be no way at all to format the drive, since Computer, and Disk Management both don't load when the drive is plugged in. Any help?
 

A:External Hard Drive is Not Recognized in Computer or Disk Management

I have a similar problem. I have an old external hard drive and it wont showed up or open under my computer or disk management. I tried to open it under disk management but there is no way to be found. The files F, G, H, etc are empty. I really appreciate an extra help here since I am not a computer expert. Thank you!!!!
 

http://www.techspot.com/community/topics/external-hard-drive-is-not-recognized-in-computer-or-disk-management.191966/
Relevancy 15.05%

After upgrading my MacBook Pro with Maverick, Audio Hijack Pro pretends not finding the source application for recording. Anyone the same problem?
 

http://www.techspot.com/community/topics/audio-hijack-problems.199984/
Relevancy 52.03%

Hello Guys

I recently changed my motherborad , and I have a new Graphics card and new processeur ,
Graphics Card :
-AMD M880G with ATI Mobility Radeon HD 4250
-AMD Radeon HD 6470M
I used every way to update the graphics card , sometimes it appears the blue screen , and then the drivers never up to date , help me as soon please

Computer : HP pavilion g6 Notebook PC
System : Windows 7 64 bits

this is an image from my computer
https://imagizer.imageshack.us/v2/618x354q90/687/l9s.png
 

A:HP pavilion g6 Notebook PC

Have you worked on or repaired many laptops? English is not your first language?
 

http://www.techspot.com/community/topics/hp-pavilion-g6-notebook-pc.199831/