Windows Support Forum

What 2 Pins Do I Short On A Dell 7010 Motherboard To Test Run It?

Q: What 2 Pins Do I Short On A Dell 7010 Motherboard To Test Run It?

The Dell desktop motherboard has a front panel connection with a total of pins and a separate power switch connection Anyone know if it s just a matter of finding the power pins Motherboard What To Pins A Test I Run 7010 2 Do Short It? Dell On to short and start this up or is there more to it I ve tried shorting every pin setup in the front panel and power switch no luck although I suppose it could mean a bad motherboard However without knowing what pins are for power how am I suppose to know for sure Also is it possible that more then pins have to be shorted or touching to start this bleeping dell motherboard I m guessing the power pins that I would have to short are in the power switch connections and therefore I don t have to do anything to the pins in the front panel connections I m hoping there are no other pins that need to be connected besides power pins to get this to start I m not concerned with What 2 Pins Do I Short On A Dell 7010 Motherboard To Test Run It? any other pins except maybe restart nbsp

Relevancy 100%
Preferred Solution: What 2 Pins Do I Short On A Dell 7010 Motherboard To Test Run It?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: What 2 Pins Do I Short On A Dell 7010 Motherboard To Test Run It?

Hopefully the manual will help.
http://www.dell.com/support/home/us...anuals?&_suid=1466538810990028524051865116334
I would download the first one.

http://forums.majorgeeks.com/index.php?threads/what-2-pins-do-i-short-on-a-dell-7010-motherboard-to-test-run-it.304985/
Relevancy 19.78%

Please refer to the message below for information on how to remove your Dell laptop BIOS password. The information also applies to other manufacturers and summarizes a wealth of data collected from previous threads and thousand of posts related to this problem.

We no longer support any further discussion on this topic as we believe all the free help that could be given is already out there (the post below sums it up pretty well). You can always go back to your system manufacturer for support, as well as google for the dozens of third party paid support providers that are available online.

Summary of laptop password help thread:
http://www.techspot.com/vb/topic109612.html
 

A:Dell BIOS password removal. Read this first BEFORE posting.

Mobile Password Help

The following support information and downloads, are provided to help members freely remove their laptop password
If all options have been tried and you still require help removing your password, search Google for 3rd party alternatives
TechSpot forums and all support is provided freely at all times, it is against our guidelines to link to external paid services
You are advised to try any or all options, with your first point of contact being the laptop manufacture, being the best option

TechSpot forums are FREE and manufacture support only

Click >Dell Support and System Information for a particular Service Tag

> Click > HP Live Chat, Drivers, Warranty and Support Information thread

> Click > Toshiba BIOS Setup / BIOS settings -- access instructions
Reset password on Satellite A205: http://www.techspot.com/vb/post613153-2.html
Reset password on Satellite A100 / A105: http://www.techspot.com/vb/post572530-1.html

Password types :

Power On Password (pop). this password can be reset by unplugging the cmos battery for a while, and plugging it back in.

Supervisor/bios Password (svp). this requires reading the eeprom chip (8 leg or 14 leg) with an electronic device by using another pc's serial port or by paperclip method if model type available.

Hard Drive Password (hdp). this is usually tied to svp, but not all the time. it requires special software and a library of known manufacturer's password. but can be cracked either recovering the data or wiping the data.
Transfer of Product Ownership
US: http://support.dell.com/support/top...tag_transfer?c=us&cs=19&l=en&s=dhs&redirect=1
International: http://support.dell.com/support/top...ansfer_form1?c=us&cs=19&l=en&s=dhs&redirect=1
International warranty contact phone numbers
http://support.dell.com/support/top...dellcare/international_travel?c=us&l=en&s=gen

Old closed threads, with lots of info:
Dell BIOS password removal (Jun 07 - Sep 07)
http://www.techspot.com/vb/topic79263.html (543 replies)
HP / Dell / etc. Laptop password help thread (Jan-Mar 2008)
http://www.techspot.com/vb/topic97423.html (533 replies)
HP / Dell / etc. Laptop password help (April - July 2008)
http://www.techspot.com/vb/topic59293.html (937 replies)
HP / Dell / etc. laptop password help thread (Aug 08 - Apr 2009)
http://www.techspot.com/vb/topic109612.html (2200+ replies)

Downloads

Dell Manuals :
http://support.dell.com/support/systemsinfo/documentation.aspx?c=us&l=en&s=gen&~cat=12#12

DSTCD.iso : (Release date: 22-November-2005)
http://www.savefile.com/files/2063585

"Paperclip Procedure"
HTML Document: http://web.archive.org/web/20031103020606/http://qasimtoep.tripod.com/dell/dell6.html
PDF Document: http://www.savefile.com/files/2059217

laptops unlocked: http://www.techspot.com/vb/post645683-913.html
Chip 24C02 24C04: http://www.techspot.com/vb/post698486-1134.html
Dell IC Numbers: http://www.techspot.com/vb/post645922-916.html

SvcTag.exe :
ftp://ftp.us.dell.com/utility/svctag.exe

Asset.com :
ftp://ftp.us.dell.com/utility/asset.com
Command line Uses => asset /? (eg Asset /o for owner tag)
CmosPwd :
http://www.cgsecurity.org/wiki/CmosPwd

Attachments
HP OldPass .zip includes:

[*] unlock6.exe (made in 1997)
[*] BIOS_PW.EXE (made in 2003)
[*] HDD_PW.EXE (made in 2003)

HP Oldpass2 .zip:
As above, made as a copy, using another Zip program

Dell Latitude .zip:
D35B password generator (old generator)

Dell MasterPW .zip:
D35B password generator (old generator)
How to use

 

http://www.techspot.com/community/topics/dell-bios-password-removal-read-this-first-before-posting.90285/
Relevancy 62.78%

As the title says , I accidentally cut a wire between 2 pins (or whatever they are called) and now my PC starts slowing down after 20-25 minutes when I open it. After I restart everything is back to normal but after 20-25 mins its the same again. Is there a way to fix the wire between them or I have to buy a new motherboard? (sry , my english isnt very good. I hope you understood what is my problem) the image is what im talking about ,(the red is the wire) ,I got the motherboard picture from google , so its not mine.
 

http://www.techspot.com/community/topics/accidentally-cut-wire-between-2-pins-in-motherboard.217587/
Relevancy 19.78%

Hello,

My laptop wont power on at all.
No charge light.
No light when power is pressed.

Was working fine yesterday.
Have tried battery and charger from identical working laptop to no avail.

Any ideas? I can usually fix laptops etc but if it wont power on at all I'm lost.
 

A:Dell Latitude E6520 won't power up (no lights at all)

Did you try removing the battery and AC adapter and holding down the power button for 30 seconds. Then re-installing the battery and try booting again?
 

http://www.techspot.com/community/topics/dell-latitude-e6520-wont-power-up-no-lights-at-all.196334/
Relevancy 23.22%

Hi . considering that I don't overclock , I don't wanna SLI , im gonna buy cpu I7 4790 4G - 32G ddr (8x4 quad channel) - Windows 10 64bit .What's the best gaming and cheapest gigabyte motherboard on the market ?
 

http://www.techspot.com/community/topics/gaming-motherboard.217380/
Relevancy 29.24%

I have 4 ESD mats at the computer workshop I work. The ESD mats are interconnected and one of them is connected to ground through a resistive socket (or whatever it's called) which must be several Megaohms because my Ohmeter cannot read it (it reads up to 2MOhm). Yesterday I did this test: I used a voltmeter set to AC voltage, negative probe touching the ground in a socket, the other one between my fingers. I measured 2 volts. Then I put on the ESD wrist-band and I was surprised to find that not only did the voltage go down, it rose to 2.2volts!. It looks like this mat isn't working, am I right?
 

A:How should I test my ESD mats?

to ground through a resistive socket (or whatever it's called) which must be several Megaohms because my Ohmeter cannot read it (it reads up to 2MOhm).Click to expand...

Never heard of a 'resistive socket' but the concept sounds correct.
The object is to absorb the energy to avoid the immediate discharge. However, we use capacitors for that and may be the reason for the ohm meter test results.

I would expect a resistor->capacitor->earth.ground type of circuit. The capacitor absorbs the energy and slowly drains it back to the ground. The resistor slows the charging of the capacitor to avoid the immediate ESD.

Your 2v DC test is not correct either. ESD is high voltage of a very short duration and the mat+socket would not respond to low voltable, long duration.
 

http://www.techspot.com/community/topics/how-should-i-test-my-esd-mats.214705/
Relevancy 20.21%

I have a dell latitude e6510 that won't start up. When I push the power button, the cooling fan starts up, several of the lights on the case come on for about five seconds (hdd and power) and then the whole thing powers down.
Anyone have any ideas?
Any help greatly appreciated!
 

A:Dell Latitude E6510 will not start up

Have you tried a hard start. Disconnect the battery and power cord. Then hold down the power button for about 30 seconds. Then try reconnecting the battery or the power plug and see if it will start. If this dose not work you might what to post your computer or laptops Model and make plus your systems specs.
 

http://www.techspot.com/community/topics/dell-latitude-e6510-will-not-start-up.183347/
Relevancy 22.36%

Elitegroup Computer Systems, better known to PC enthusiasts as ECS, may soon kiss the branded motherboard market goodbye. Sources familiar with the matter claim ECS is planning to exit the DIY board market due to shrinking global demand and increased...

Read more
 

A:ECS reportedly set to exit consumer motherboard market

Wow didn't even know these guys were still around I've not touched and ECS board since the athlon 64 days and even then I wouldn't buy one lol.

Not saying they were terrible but I've never been a budget system builder so their products have never appealed to me.
 

http://www.techspot.com/community/topics/ecs-reportedly-set-to-exit-consumer-motherboard-market.215774/
Relevancy 21.93%

Since pure alcohol, for example pure Isopropyl alcohol and distilled water are supposed not to conduct electricity. What would happen if I dipped a turned-on PCB into it? . What would happen to a motherboard?
 

A:Would a PCB or motherboard be damaged if dipped into pure alcohol/distilled water while turned on?

OUCH ! Your assumptions may be spot on, but OMG why would one try this?????????

There's something called 'leakage' - - current flow when it's not expected.

I was working in an aerospace lab and the the EE had me perform an experiment because I said "the resistivity of the salt water was too low and leakage would trigger the device". So we got a bucket of salt water and dropped the device into the bucket - - precisely 30 seconds later (the designed timeout), the bucket erupted and salt water spewed everywhere [yes, the device was an explosive link].

The trigger point for the explosive was <500ma
 

http://www.techspot.com/community/topics/would-a-pcb-or-motherboard-be-damaged-if-dipped-into-pure-alcohol-distilled-water-while-turned-on.215856/
Relevancy 19.35%

Does anyone know of a way or download I can use to remove an existing service tag on a Dell system board? Working on a Dell Latitude E7250.

Your feedback would be much appreciated.
 

A:Dell Service Tag removal on a Latitude E7250/7250 (Late 2014)

WHY? The tag is fundamental to getting parts for that system.
 

http://www.techspot.com/community/topics/dell-service-tag-removal-on-a-latitude-e7250-7250-late-2014.215604/
Relevancy 88.15%

Hello,
I had a dell optiplex 7010 (service tag# 3LLBSW1) computer.
I took the motherboard out of this computer and installed it into a new ATX case.
all went well now I 'm having problems connecting the front panel audio, power switch, reset switch, & HD LED)

the dell connector is different than the cables I got on the new case. can anyone please help me to figure out how to plug these cables into the motherboard.

thanks
 

A:Dell Optiplex 7010 motherboard

Attach photos.
 

http://www.techspot.com/community/topics/dell-optiplex-7010-motherboard.198629/
Relevancy 19.35%

Infinity displays are all the rage among notebook buyers these days. Dell's XPS 13 (2015) was an excellent example of what's possible when it launched earlier this year and now, they're bringing the gorgeous screen to its bigger brother. ...

Read more
 

A:Dell's revised XPS 15 includes gorgeous Infinity display, Windows 10

What's an Infinity screen?... Short answers please, I'm not interested enough to Google it.
 

http://www.techspot.com/community/topics/dells-revised-xps-15-includes-gorgeous-infinity-display-windows-10.213699/
Relevancy 23.65%

Memtest and other memory test software don't tell you which of the modules is the faulty one. Is there any way to tell which is the bad stick besides testing one-by-one?

Thank you
 

A:Does any memory test tell you which of the memory sticks is bad?

Not really. but you can test each stick one by one
 

http://www.techspot.com/community/topics/does-any-memory-test-tell-you-which-of-the-memory-sticks-is-bad.213800/
Relevancy 19.78%

Hello,

I've got a Dell Inspiron 9400.

For a few years now the left half of the screen is really dark, with the other side normal brightness and a noticeable divide between the two. This only happens when the power supply is plugged in, the screen is fine when running off the battery.

I remember at the time doing a quick search and reading that it was likely to be a faulty battery, so that was replaced but didn't make a difference. Very few searches come back with an exact match of my situation, but keep seeing to detach the LCD cables and make sure they're in good condition yet haven't seen any success stories.

Does anyone know the problem?

Oli
 

A:Dell Inspiron half of the screen is dark

Does attaching an external monitor show the same problem?
 

http://www.techspot.com/community/topics/dell-inspiron-half-of-the-screen-is-dark.187509/
Relevancy 23.22%

Hi guys

I have an intel DP55WB whitsburg a pair of matched 2gb sticks installed at the moment in slots 1 and 3 and nothing in 0 or 2.

I put a new 4gb stick of IBM ram in and get 3 long beeps and it keeps repeating. Everything goes back to normal when I take out the new stick. It happens in both slots 0 and 2.

Am I doing something wrong? With the new stick do I need to change the placement of my original ram?

Thanks!
 

A:New ram makes motherboard beep

This motherboard has support for DDR3 1333 /1066 MHz DIMMs. If you insert DDR3 1600 it probably will not work. Intel motherboards are famous for sticking to the specifications and not exceeding them. I own 2 Intel Motherboards.

I don't know if this is allowed but here is the Intel Specifications of the Motherboard.
http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dp55wb.html

Make sure you unplug the computer from the wall or the power strip before adjusting RAM DIMMS. All RAM is different. Normally you add it in Pairs to maintain the dual channel functionality. If you don't the RAM will slow down. It is not wise to mix and match different kinds of RAM. This can be related to capacity, latency, SPEED, voltage. Then some RAM may not work with other RAM due to incompatibility with the existing RAM. Some RAM may not work in your motherboard due to incompatibility with the motherboard. Some shorter DIMMS also use a different voltage and you cant mix different voltages. RAM is not just buy it and stick it in.
 

http://www.techspot.com/community/topics/new-ram-makes-motherboard-beep.212524/
Relevancy 22.36%

I get a bit jittery when I'm unplugging cable connectors (these images are just examples, I'm thinking of all types of connectors). What's the best way to safely unplug them?, pull from the cables or from the plastic case. What's your experience?. This pics are just a few examples of connectors. I'm posting this thread about any type of connectors. Thank you.


 

A:What's the best way to unplug laptop cable internal connectors on motherboard etc?

Many simply pull apart. Watch out for the ones with locking tabs though. I don't think you have anything to worry about as long as you take your time.
 

http://www.techspot.com/community/topics/whats-the-best-way-to-unplug-laptop-cable-internal-connectors-on-motherboard-etc.212863/
Relevancy 22.36%

Hello,

I have a HDMI cable for my monitor, with a nvidia graphic card...

but now I have a big doubt, I dont know if my motherboard's graphic card's imput is not working anymore or if its my graphic's card after a FLASHY BLACKOUT today...

my nvidia control panel is not working anymore... whenever I try using VGA or HDMI with my graphic card it doesnt show any sign in the screen... so im currently using my normal VGA motherboard's imput...

I tried using an old graphic card and its not working, I tested the VGA cable and HDMI cable and they are working perfectly...

yet, after I set the graphic card in the slot, the fan it start working, if I unplug the graphic card but leave the curent cable, it doesnt start the fan so I guess the motherboard's imput is working

so idk what's the problem here, I have all the drivers and everythign was working perfectly before the blackout
 

A:Broken motherboard slot or graphic card

Well... its too late and soon for expect an answer but...

I tested my graphic card in an old motherboard and it was working... it didnt load windows cuz of the diferent motherboard but connecting my VGA in my gpu worked, and the HMDI didnt work I guess because it need to be configured after windows loading etc
 

http://www.techspot.com/community/topics/broken-motherboard-slot-or-graphic-card.212639/
Relevancy 23.22%

So I made my first custom build pc recently and my specs:
Motherboard: Z97 GAMING 5
CPU: Intel 17-4790k
GPU: Gigabyte Geforce G1 GTX 970 4GB
Ram: 16gb ddr3

In my MSI software (MSI Command center) it goes around the 85 degrees when I play Battlefield 4 on ultra.
Is the motherboard temp the same as the CPU temp? and is 85 degrees too much?
I do use the stock cpu cooler.
Also I have a 200mm front and a 140mm in the back.
 

A:Motherboard at 87 Degrees?

Download HWiNFO64 and use this software to compare temps. Not saying there is anything wrong with the MSI software, but there is always a possibility that it is not reading the correct temps.
Also, do you overclock? Overclocking will affect the temps, especially if you are still using stock coolers.
 

http://www.techspot.com/community/topics/motherboard-at-87-degrees.212568/
Relevancy 20.64%

Hello everyone, I had never opened up a PC before until yesterday when I had a plan to add a second hard drive, I had read as much as I could to prepare, however my first attempt ended with a nightmare of blue screens telling me to contact the manufacturer !! after a few hours of panic I managed to get it working again, I am not sure exactly how I did it and may never know ! this is all leading to a question, can I replace the dvd drive with a hard drive ? is it just a case of swapping them over and booting up ? the reason I want to do this is because I don't have the right cable to have both dvd and a second hard drive and the hard drive I want to add has data on it that I need to get to so this is just a temp fix til I can afford to buy a cable ( yes I am that skint ! )
I would be grateful for any advice I really am a novice when it comes to the inside of a PC.
Thanks
 

A:Dell GX280

If you want to use your spare/other hard drive to use the data on it, and it's not important to have it built in the PC, then your better bet might be to get (buy I'm afraid) an adapter kit it to turn your spare HD into an USB external drive.
That way it will work as spare storage and you can use it with any pc that has USB sockets (99%). The adapter kit/caddy would be made for an IDE hard drive or a SATA type, so you would have to check the connectors on the back edge first.
Something along these lines;
http://usbnow.co.uk/p52/USB_2.0_IDE_&_SATA_Cable_(with_Power_Supply)/product_info.html?page=2
Otherwise, a problem you might have run into is that OEM PC's are often built with no sockets or connectors to add anything on. You just might have a spare SATA socket on the motherboard for a second HD (it would show up as 'D' if you used it.)
A new SATA cable costs about GBP 2 /USD 3 so that's not too much for all the extra HD space you will gain.
Another issue will be that you will have to make some changes in the BIOS, so that the PC can detect any new hardware you fit. It's possible the settings are at 'Auto' and it will be ok, but it would better to set it up correctly.
( I use Dell Dimension 5150 so have run into some of these issues.)
 

http://www.techspot.com/community/topics/dell-gx280.212336/
Relevancy 19.78%

Hello I need to connect power/reset buttons to dell optiplex 620, but I just can't connect them anywhere on motherboard.

I need help as fast as possible

Thank you
 

http://www.techspot.com/community/topics/dell-optiplex-620-connect-power-reset-buttons.212270/
Relevancy 22.36%

HI, I was wondering if it is safe to use an atx psu on a motherboard with an eatx power connector. The motherboard has a 24-pin eatx and a 4-pin atx 12v connector. I bought the motherboard and started using an atx psu and everything seems to work ok then realized after it was an eatx power connector on the motherboard. Are there eatx psu's? Thanks
 

A:Safe to use ATX PSU on a motherboard with an EATX power connector?

EATX is a form factor (12"x13") not a power connector. I'm assuming you are talking about using a PSU with a 20 pin (old ATX) connector with a newer motherboard that has a 24 pin (current ATX) connector. If that is the case you will need to consult your motherboard's manual. Some 24 pin boards run fine with only 20 pins some don't. The issue is that each pin in only rated to carry a certain amount of current (Amps). If you overload one of these pins your risk burning or melting the ATX connector on either the PSU, Motherboard, or both.
 

http://www.techspot.com/community/topics/safe-to-use-atx-psu-on-a-motherboard-with-an-eatx-power-connector.181034/
Relevancy 19.35%

Neither my keyboard or mouse are working on any of the 7 USB ports on my computer. My mouse was initially working, but I read somewhere if you delete the keyboard drivers you can reinstall them and it will work again. BUT when I was doing that I stupidly uninstalled my mouse driver so now NOTHING works. I can't try if it works in safe mode because my keyboard doesn't respond when I hit f12 during boot up.

When I plug in the mouse or keyboard, I get a window that pops up asking if I want to install the hardware, but it's impossible for me to do anything because my mouse and keyboard don't work! If anyone has any ideas I would greatly appreciate the help. Thanks!
 

A:My Dell Demension e510's (Window's XP) keyboard and mouse don't work

First I would try to find a different working keyboard because you should at less be able to boot into safe mode because the drivers don't even load until windows start loading.
 

http://www.techspot.com/community/topics/my-dell-demension-e510s-windows-xp-keyboard-and-mouse-dont-work.211116/
Relevancy 22.79%

Current specs
Intel db75en
Intel i5 3rd gen 3450
Gtx 970 amp extreme edition
Samsung evo 120
PSU corsair vs 650
Liquid cooler h50 corsair

Currently they are on LGA 1155 mobo

I just killed my old motherboard
And now I am planning to buy i7 4790k

There are three motherboards I have in mind and all of them are asus z97 series based. Want to buy only asus..
Z97 A
Z97 k
Z97 c

I want to know that whether I should upgrade and get 1150 mobo and new processor or not!

(I have no plans to put dual gtx 970 bt plan to use secondary gfx card (gtx560) as phyx dedicated card)
If yes then
1. Which mobo I should go for and why?
2. Will the old h50 will be fittable on my new board or not!

Any new advise also appreciated!
Thank You
 

http://www.techspot.com/community/topics/motherboard-liquid-cooler-suggestions.210943/
Relevancy 28.38%

The impending launch of DirectX 12 is one of the more exciting things to happen in PC gaming in recent years. Many people are eager to see how the low level API will improve the performance of games that implement...

Read more
 

A:You can now test DirectX 12 yourself with latest 3DMark update

This is way windows is doomed. DirectX 12 should be available for win 7-10, but MS is so greedy, they cant seem to understand why they are disliked and windows will evientaly be destroyed by Google. Just look at there market share. I betting big on SteamOS, and once it takes off, I will take the jump. Windows is now to bloated, and with greed, I hope all backers back Vulkan. DX12 on Win 10 only has officially broke the camel back.
 

http://www.techspot.com/community/topics/you-can-now-test-directx-12-yourself-with-latest-3dmark-update.210768/
Relevancy 19.78%

My Dell has been acting up pretty recently (6 months old and still under warranty), and the battery does not charge past 80%. Once it get's near the 80% charge, it immediately fills up to 100%.

I've remembered using the laptop for more than 6 hours under moderate use but now it barely lasts 2 hours.

Please give me some advice because I'm really dependent on this laptop.
 

A:Dell Inspiron 3437 Battery Issue

You have 6 or 8 cells battery. If 6 it's normall. Should work about 2-max 3 hours when new. On 8 cells could work till 5 h.
Producers give only 6 months of warranty on bateries
 

http://www.techspot.com/community/topics/dell-inspiron-3437-battery-issue.210804/
Relevancy 23.65%

Hey Guys plz help me out in finding a Compatible MOTHERBOARD which can be upgraded further
Requirements
I have intel Q6600 Processor Core 2 Quad 2.40 GHz (4 CPUs)( I would like to overclock it)
Navidia 9800GT 1gb
Ram 4GB DDR3

I dnt knw if wifi and blutooth comes inbuilt in motherboad if ys thn also include them.
And also suggest a Compatible SMPS Socket(LGA 775)
 

A:Need a motherboard

What is your current motherboard?
 

http://www.techspot.com/community/topics/need-a-motherboard.209509/
Relevancy 19.78%

Hello all!

I wonder if anyone could help me shed some light on the best process for the above subject.

I currently have a Dell Studio XPS 435MT (Vista 64bit) running two HDD's in RAID 0 (as from factory) I need to install Windows 7 64bit and would like to also install it onto the new SSD I have bought (Crucial 128GB) as an upgrade.

Could I simply take the current HDD's out (after backing up essential data) to keep safe as backup plan and add the SSD into slot 0 and install Windows 7?? Then possibly add say a 1tb storage drive to the system later?

One solution someone has sent my way is to clone the two 500gb RAID 0 drives to a single 1tb drive then install Windows 7 onto the new SSD and have both drives on a multiboot? Could this work?

I have seen/heard many versions of how to go about this install but no real evidence of a true way?

Any help would be much appreciated.

Kind regards,
Poke13
 

A:Dell Studio XPS 435MT - Installing SSD and Windows 7 64bit

It takes 3-500GB drives to give you 1.3TB of storage space because of formatting over-head. 2-500GB drives will be considerably less than 1TB. Keep the 2-500's in a single RAID array and set the SSD as a separate partition for Windows 7
 

http://www.techspot.com/community/topics/dell-studio-xps-435mt-installing-ssd-and-windows-7-64bit.199415/
Relevancy 20.21%

My Dell Inspiron 5520 will respond when I press the power button, will flash all the LEDs and then just shut down. The whole process takes about 6 seconds. The fan starts up but nothing is displayed on the screen and there are no weird beeps. Any ideas on what is happening or how to get it to complete booting up?

I got this in December of 2012 and have had very few other problems with it
 

A:Dell Inspiron 5520 Will not start up

Are you comfortable with disassembling the laptop? Really the only thing we can test is removing the Hard Drive, RAM, and DVD player.

First I would try the HD and DVD to see if either of those are stopping it from powering for what ever reason, and you will still get something on the screen and see if it boots.

Once you remove RAM you are not going to get anything on the screen, it doesn't POST(Power-On Self-Test) it will fail guaranteed, but you "SHOULD" get beeps, however the problem with that is ensuring the MB is actually causing the Beep, and if it's not it'll just do the same thing regardless, it's best to have some spare RAM that you know works to test with. (Same speeds and kind, need to be sure) The reason for this is to make sure that it's not RAM but you're not just getting the same issue.

Putting in some spare RAM will at least allow you to ensure it's not just the RAM chips, one thing to try if you have multiple sticks of RAM is try each stick separately, and in each slot to make sure it's not one stick or one slot causing and issue.

The only other things to make sure is the power that is getting to the laptop is clean power. Two ways to do this as well, firstly you can test the power supply using a Multi-Meter if you have one and know how to use it. You can check the voltages on the power supply, Connect to the wall and test the first portion to ensure 120V clean power, then if its good, test it going through the transformer and check the bottom of the laptop (Possibly underneath the battery) for the proper Voltage and Amperage. Test with the multimetre and see if it matches, if its not giving proper power it can cause tons of issues.

The other option is to buy a universal power supply and change the voltage to match the laptop and then try it. Due note that not ALL universals work with all models of laptop and that it's not the recommended way of power, it's best to use the adapter designed by the company, specially for HP's and Dell's as they seem to be much more proprietary than other companies.
 

http://www.techspot.com/community/topics/dell-inspiron-5520-will-not-start-up.208719/
Relevancy 20.21%

Hello all I am looking at purchasing a new PC I would like to be able to use monitors for business less so gaming but do game on occasion I need to ISO XPS 8700 rig: this on Comments Dell be able to open Excel files with millions of rows of records without super long lag Also have many windows and programs opened at once used for business purposes This is a computer ISO Comments on this rig: Dell XPS 8700 I m looking at Dell XPS and I can currently get it for after coupon Below I will list the specs ISO Comments on this rig: Dell XPS 8700 Any comments or help will be greatly appreciated XPS th Generation Intel Core i - processor M Cache up to GHz Windows Bit English GB Dual Channel DDR MHz - DIMMs Dell KB Wired Multimedia Keyboard US-English NVIDIA GeForce GTX GB DDR Dell SRV Software TB RPM SATA Hard Drive Gb s XPS Black Chassis Dell Laser Mouse Tray load DVD Drive Reads and Writes to DVD CD Integrated with WAVE MAXXAudio No speakers Speakers are required to hear audio from your system Dell Wireless a b g n Bluetooth v US Power Cord SERI Guide ENG FRN Year Enhanced Support RDVD Structured in Addl SW Module Placemat Global No Adobe Elements Software Requested Dell com Order Non-EPA Ship Materials GOOD US CA BTO Cyberlink Media Suite Essentials without Media Document Reader Included Dropbox Digital Delivery GB for Year Promotion Label Structured in Addl SW CFI Not Included Label Structured in Addl SW No Office License Included Additional Software McAfee LiveSafe Month Subscription Operating System Recovery Media Not Included nbsp

A:ISO Comments on this rig: Dell XPS 8700

What is the current computer u have now? As far as business it does not take that much of a computer, and a new video card for it might do for the running of multiple monitors.
 

http://www.techspot.com/community/topics/iso-comments-on-this-rig-dell-xps-8700.208726/
Relevancy 23.22%

I have a computer that I built and I am pretty sure the motherboard is going out on me... Any suggestions for a new motherboard that will support the parts I already have from my previous build?

MoBo - thats going out - : ASUS Crosshair IV Extreme AM3 AMD 890FX SATA 6Gb/s USB 3.0 Extended ATX AMD Moboo

Processor: AMD Phenom II X6 1100T Black Edition Thuban 6-Core 3.3GHz, 3.7GHz Turbo Socket AM3 125W Desktop Processor

Hard Drive: Seagate Barracuda 7200.14 ST3000DM001 3TB 7200RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive

Memory: G.Skill Ripjaws X + Turbulence II Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL9Q-16GBXLD

Videocard: EVGA 02G-P3-1386-KR GeForce GTX 460 (Fermi) 2GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card

I built this thing around 2011 so any suggestions for something new that will work for me?
 

A:Motherboard for my build

Take a look here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&IsNodeId=1&N=100007625 600158776
 

http://www.techspot.com/community/topics/motherboard-for-my-build.208651/
Relevancy 19.35%

Hi, everyone - I have a dell e4300 - actually I have three. On one, when it is plugged in to charge, the blue light that indicates that it is plugged in and charging, which normally would be blue continuously, is blinking, or oscillatiing, off and on.

I bent the pin on the inside of the cord slightly in order to maybe get a better contact, and bent the barrel slightly for same reason - the blinking is the same.

So, it does not quite seem like this is a weak, variable connection. Also, I get the same thing with another charger cable. Does this mean something?
 

A:Dell e4300 blue light charge indicator blinking

Well ,the more I look at this, the less regular it seems, but it does come on momentarily every several seconds. It sure is not charged up, despite being plugged in for over 24 hours.
 

http://www.techspot.com/community/topics/dell-e4300-blue-light-charge-indicator-blinking.208530/
Relevancy 23.22%

Greetings. I have an Asrok Z77 Extreme 6 Motherboard.

I currently have an I5 3570K in there. I believe my Mobo is LGA 1155.

Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.

Not sure if I will see any real increase in performance. I over clock the I5 to 4.2.

Any advice is welcome.
 

A:Question about my motherboard

Larsenex said:





Can I pull out the 3570L and drop in a I7 4790K? I 'think' they are the same socket.Click to expand...

Sorry, no. While your motherboard does have socket 1155, the processor i7 4790K is socket 1150. You'll need a new motherboard.
 

http://www.techspot.com/community/topics/question-about-my-motherboard.208311/
Relevancy 21.93%

Okay so I am starting this thread here seeing as how Clock and A10-6800K AMD Motherboard Wrong Setting Voltages Speeds the topic of the old one no longer applies to this situation I jumped ahead of myself trying to overclock this CPU which made me question the frequencies and voltages which are supposed to be set automatically by the motherboard I am having a tough time understanding all this I will post links to the exact AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds parts I am AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds using so whoever is keen enough to try to help will know what we re dealing with Motherboard MSI A X-G Gaming CPU AMD A - K Richland GHz Turbo Black Edition RAM Mushkin Enhanced Blackline DDR MHz PC V CPU-Z Screenshots After doing some AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds reading in regards to overclocking I have found out some details which are totally incorrect in my case For starters the FSB to DRAM Frequency Ratio from what I read is supposed to be some reported slightly higher ratios or something similar but CPUZ is showing which sounds absurd Also it s reporting the RAM as PC - at MHz and voltage at I haev Intel XMP enabled on the motherboard and the motherboard reports memory speed in BIOS at DDR- MHz Can someone analyze the above shot and information and clue me in as to what is wrong and what needs to be done I would really appreciate it because I am baffled I have no clue what the CPU-NB frequency and voltages are for so I don t want to mess with something I don t know anything about Anyway any and all help is much appreciated as always nbsp

A:AMD A10-6800K Motherboard Setting Wrong Voltages and Clock Speeds

Go into the BIOS and change the DRAM voltage to 1.60 or 1.65V and set the timing as u see XMP-2132
 

http://www.techspot.com/community/topics/amd-a10-6800k-motherboard-setting-wrong-voltages-and-clock-speeds.208183/
Relevancy 20.21%

I recently bought a used dell c640. It worked fine but there was no charger with it so of course it sat dead for days. Until I bought a brand new adapter/charger. I've had it plugged in for about an hour. The battery light is on but sometime it will go off. If I push the battery in a lil it turns back on. I tried turning power on without battery installed and the on light and little lights by the power button come on for a few seconds then go off. Any idea what's wrong? I don't think it's the cord like I said new and the lights wouldn't come on until I plugged it in. Please HELP!
 

A:Dell latitude c640 won't turn on

This has worked for me. Remove the battery and power cord then hold down the power button for about 20 secs. Replace the battery, plug in the power brick and see if the laptop will boot up.
 

http://www.techspot.com/community/topics/dell-latitude-c640-wont-turn-on.208309/
Relevancy 20.21%

Have an unusual mark on screen at startup then green lines and pink but otherwise pc ok cannot upload jpeg image for some reason
 

http://www.techspot.com/community/topics/screen-issue-dell-1520.208131/
Relevancy 23.22%

Hello All I am having a bit of a strange issue that I have with CPU Motherboard or Strange issue never run into before Yesterday after getting home from the store I booted up my PC and started to play a game although I noticed that I was getting framerate stuttering It seemed to keep dropping a lot throughout my play So I started taking a look at some of my sensor utilities Strange issue with CPU or Motherboard When I opened Asus Probe II I noticed that it was telling me that one of my chassis fans weren t running Okay no problem it must have gone bad I than took at look at the frequency and noticed that my AMD FX- was only running at GHz per core I also checked CPUZ and had the same results So I booted to the bios just to take a look and noticed that it show my Chassis fan WAS running fine and that my frequency was at GHz per core as it should So I though that it must be a fluke Booted back into windows and again same issues So I shutdown and took the side off my case which is also where the Chassis fan it said was running is located Turned the computer back on and noticed the fan was running fine I logged into windows and noticed that seconds after windows logs in that one chassis fan turns off and the CPU underclocks to GHz multiplier All of the other fans in my case still running perfectly GPU running fine HDD s running fine Could it be possible that Asus probe II itself is underclocking my CPU If so what would be causing the fan to shut off My first thought was power-supply but I have no issues when stressing my hardware even in this state I am an IT consultant but have not run into this issue before Any help would be greatly appreciated PC Specs- ASUS m a r Motherboard AMD FX- CPU CoolerMaster HYPER N CPU Cooler Kingston HyperX Blu GB x Galaxy Geforce GTX Ti OC w PowerSupply Cougar Evolution Full Tower Case Samsung gb SSD Let me know if you need any other information nbsp

A:Strange issue with CPU or Motherboard

CPU temperature too high?
 

http://www.techspot.com/community/topics/strange-issue-with-cpu-or-motherboard.203184/
Relevancy 23.22%

Hi, I have a MSI g31m3 v2 s-7529 motherboard and wont turn on.
I change the power supply
I put on some themical paste in the cpu
I put away all hard drivers
but didnt work, only the fan turn on then its turn off
I think the motherboard dosent work.
 

A:Motherboard wont turn on

Please provide list of make and model for everything you have for this setup (CPU, RAM, GPU, Hard Drives, Optical Drives, Power Supply, Aftermarket coolers, etc.). We need to make sure that you have all compatible parts.
Also, have you tried to disconnect all things except the power supply connection to the motherboard, CPU & RAM and see if the motherboard starts?
 

http://www.techspot.com/community/topics/motherboard-wont-turn-on.208015/
Relevancy 22.36%

Wanted a gaming config ...
I have GCARD > NVIDIA GEFORCE GTS 450 (ASUS)
I NEED a good motherboard for gaming with intel core i3 4160.... 3.6ghz ,lga1150
my options are :
gigabyte/asus
B85 M D3H (or other b85 variants)
H87 M D3H (or other h87 variants)
H97
H81

all above are compatible but its really difficult 2 choose as the differences
even among same chipsets are too close(eg there are variants under same
h87)

all the above boards r in my budget!

games downloaded:
watch dogs ,cod(adv warfare,ghosts),max payne 3,MOH (warfighter),FAR CRY 4,ASSASINS CREED UNITY,Crysis 3 ,Dead Rising 3 ,Dead Space 3 ,GTA,LA Noire,Middle-earth: Shadow of Mordor,Need for Speed Rivals ETC ETC (thank god PIRATE BAY is up agn from COSTA rica)
 

A:Suggest motherboard for nvidia GTS450 & i3 4160 (gaming)

I would go for either the H87 or H97. It is really your choice in the end but all of the ones listed are good. ASUS, Gigabyte, and Asrock are all good board manufacturers.
 

http://www.techspot.com/community/topics/suggest-motherboard-for-nvidia-gts450-i3-4160-gaming.207743/
Relevancy 19.78%

hi guys wish you all a great new year.

im facing a very annoying issue with my laptop, some keys are not working, the left **** and the windows key I just don't know whats happening.

can someone please help mw with that.

thanks in advance.
 

http://www.techspot.com/community/topics/dell-inspiron-7537-shift-and-windows-key-not-working.207933/
Relevancy 19.78%

Now I got a new problem on my dell Latitude E6410, I install windows 7 ultimate 64bit, and instal all upadates, its works fine, but when I plug in or plug out charger pin there is appear total black screen for a moment, I tried power settings and so many things about graphics but fail, if anyone have a solution then tell me, I'll be glad.
 

http://www.techspot.com/community/topics/dell-latitude-e6410-black-secreen-on-charging.207887/
Relevancy 23.65%

Not sure if this is only confusing to me, but why are there so many different versions of X99 boards by EACH manufacturer?

I'm looking at Asrock, they have about 10 models: http://www.asrock.com.tw/microsite/IntelX99/

Then I'm looking at MSI and there are 6 models: http://www.msi.com/product/mb/#?category=Socket 2011-3&category_no=1179

SERIOUSLY, how to choose?
 

A:Which X99 Motherboard?

There are several ways you can choose a motherboard, but I personally look at the brand first before looking at features because some manufacturers are more reliable than others. I personally like ASUS and Gigabyte but ASRock and MSI are alright also. Now, onto features. There isn't really much you can differtiate between motherboards of the same chipset since most features are largely unimportant to the regular consumer. Usually the more expensive boards have more "features", whether relavent/important or not, is up to the buyer. I would check out this link.

If you still have questions, please ask.
 

http://www.techspot.com/community/topics/which-x99-motherboard.207791/
Relevancy 19.78%

As stated above I have a Dell PrecisionT with Intel Xeon quad core processors E GHz I T5400 on on I need my the upgrading CPU's Precision Dell advice am running a bit version of Windows Ultimate and have GB of ram memory installed I recently I need advice on upgrading the CPU's on my Dell Precision T5400 had a hard drive failure so I replaced my boot up drive with a solid state of GB for a quick start-up and I plan to add another solid state drive for my frequently used software Then I will add a Western Digital TB drive for data and what not that I don t access very often maybe some movies and records etc the computer is I need advice on upgrading the CPU's on my Dell Precision T5400 set up for or hard drives and I already have the terabyte drive so why not use it I need advice on upgrading the CPU's on my Dell Precision T5400 I am pretty sure my power supply is about watt so I have all the power I should think I will ever need My main question is that I want to upgrade my CPU s and I don t know how high I can safely upgrade them I also want to upgrade my video card as this unit is dependent upon a plug in card it has no integrated video but I know that is a different section on the forum If I could get some advice on upgrading my CPU s I would greatly appreciate it I am afraid that I may not be able to get much more performance out of this model but my desires are meager I have found that I enjoy creating websites and blogs so I want to teach myself with the materials I can find online It is surprising at the free information you can get to teach yourself if you are only willing Please forgive me for going on I desperately need some advice on this upgrade if anyone could spare me a few moments to point me in the right direction Basically I need to know where to find the information on how far I can upgrade the CPU s and I believe the RAM can be upgraded to MB but I may not need quite that much I also need to find a good deal on a video card I know that is for another forum but I seem to get the worst luck when it comes to obtaining a good video card Please feel free to offer any advice I am sincerely grateful for any help Eric nbsp

A:I need advice on upgrading the CPU's on my Dell Precision T5400

I have a few computers and none of them come anywhere near yours so I'm puzzled that you feel any pressure to upgrade. There may be some interesting developments next year with Windows 10 and new hardware worth splashing out on.
 

http://www.techspot.com/community/topics/i-need-advice-on-upgrading-the-cpus-on-my-dell-precision-t5400.207724/
Relevancy 19.78%

Error 0x4001100200001012 attempting to boot from the System Repair CD created on a Dell.

Apparently, this is specific to Dell and their Hack with DataSafe. You can use any System Repair CD generated on some other platform and it will give you access to restore your System Image. Google using that error code and you'll find lots of info. A Windows Install disk will work too.

I have a SR cd from another system and it works just fine :whew:

Don't get caught up a creek w/o a paddle - - if you plan on using a System Image to recover a system,
make sure you have the tools which will allow that image to be restored - - DON'T ASSUME!

background: I'm seeing SMART data that corroborates my laptop HD is degrading and I wanted to prove I could restore when the replacement arrives. As this Dell laptop is a pain to open up, I didn't want to go down in flames due to procedural errors or lack of familiarity. ( I'll never by another Dell )
 

http://www.techspot.com/community/topics/caveat-emptor-dell-system-repair-disk.207223/
Relevancy 19.78%

We just bought a monitor U2713H direct from Dell.

When we click on Factory Reset, the monitor doesn?t go back to Factory default setting.

-In particular, Contrast/Brightness: 0.
In terms of Color Setting, Input color Format: None.
Preset Modes: Movie

-Then we click on Reset Color Settings, Input Color Format: RGB, Preset Modes: Standard.

-When click on Factory Reset again, Contrast/Brightness and Color Setting come back to the same condition as above (Contrast/Brightness are 0, Input color Format: None.
Preset Modes: Movie).

-After we try to set up Contrast/Brightness to 50/50, we shut down desktop or turn off the power button on the monitor. Then we turn on computer or turn on power button on the monitor, Contrast/Brightness are 0, Input Color Format: None, Preset Modes: Movie.

-In summary, all menu settings can?t be saved by the monitor and Factory Reset doesn?t work.

Any idea would be highly appreciated. Thank you a lot in advance
 

A:Dell monitor U2713H error: settings can't be saved

What I would suggest is ask Dell if they would warenty it new it should have one and Dell should honor it. I would say they will but I have not done business with them in years, although the monitor I am using right now is one of theirs and is many years old.
 

http://www.techspot.com/community/topics/dell-monitor-u2713h-error-settings-cant-be-saved.207032/
Relevancy 23.22%

I m a tech with years of IT experience PSU. power bad Still or motherboard a won't up Not and I ve built my fair share of computers over the years I have a puzzling one I cannot get to Not a bad motherboard or PSU. Still won't power up the bottom of I m afraid I cannot for the life of me Not a bad motherboard or PSU. Still won't power up get this computer to power on Here is a list of things I ve tried and or eliminated The first thing to happen was quite strange The computer would start when I first got it it was a used system but only after a few presses of the power button I don t ever remember it powering up on the first press of the power button It s an Intel DX BT Extreme Series motherboard with a bit Intel CPU in it GB of RAM FYI the motherboard has a aux power on off switch ON the motherboard itself used for testing at the labs - the manual recommends using the front panel switch however obviously Current state the computer will not turn on at all There are two LED s by the CPU that are for indicating a voltage regulator overheating and the CPU overheating When I hit the power switch the VR Regulator LED blinks quickly once and that is all Ok here goes - Tested PSU came back fine Decided to use that PSU in another system to double check would not boot up in the nd system I replaced the PSU with a good one I know that works of even higher wattage Still doesn t boot up - Tried using onboard power switch same result Tried using the reset switch as a power switch same result so the switches are likely OK I even removed all front panel switch connectors and tried to jumper the two power pins using a flathead screwdriver Still doesn t boot up no power only a solid green light on the mobo when power is plugged in - Reseated all RAM sticks although a system should still POST if a stick is bad as well as CPU same result - Replaced RAM with RAM I know works Same clock speed compatible with this motherboard Again if it s RAM it shouldn t prevent the fans from spinning - Replaced CPU with a good one same socket factor Still no powering up - Removed all other hardware USB cables video card speaker connector drives etc same result - Also replaced the fan with a non-OEM intel fan that has a higher RPM and draws more air - Tried replacing thermal paste on the premise that since the VR reg is showing it s overheating hopefully this would do something - Replaced CMOS battery Same result After testing just about everything I came to the conclusion that it must be a bad motherboard What Yeah a faulty Intel motherboard I ve never heard of such a thing So I RMA ed the board and got the new on in the mail How puzzled was I when the same exact thing happened Words can t describe Solid green light when power cord is plugged in VR light flashes BTW the green light is a V Standby Power Indicator Now in the manaul it states that these lights CPU amp VR LED s will flash when they re indicating a fault not blink once So I tried all the steps again nothing I have replaced every piece of hardware I can think of with good hardware and am still getting the same result - a flashing VR regulator LED Intel has no support for this and the people I ve spoken with at tech support at Intel are stumped My only thought left is a grounding issue which would seem strange to me since the problem gradually got worse that is taking more presses of the power button to power on then eventually no response I am going to switch cases and see if that s the problem If that fails I am out of troubleshooting steps - I ve literally replaced EVERYTHING inside and outside the computer Again to reiterate these are the things that have remained constant in both motherboards original and RMA ed Solid green V Standby Power Indicator Flash of the VR LED when applying power I have replaced every component with the exception of the case and the standouts which I believe have grounding rings on the threads Any ideas nbsp

A:Not a bad motherboard or PSU. Still won't power up

Speaking of shorts, try pulling the motherboard out of the case. Place it on a non-static, non-conducting surface and leaving in the CPU, heatsink/fan, only hook up the PSU, RAM and graphics card, see if will post.
 

http://www.techspot.com/community/topics/not-a-bad-motherboard-or-psu-still-wont-power-up.151315/
Relevancy 23.22%

A time ago I was plugging in to many USB devices at the same time. I had received a message saying that a power problem had occurred. Since then I have been unable to use the two ports, and I have looked up multiple guides on how to fix this. Nothing has worked, and I have run out of options. I do not have the disk anymore for the drivers.
 

A:Universal Serial Bus on MotherBoard

Just a note to any one, Keep the driver disk, not that would have helped, but there is always a chance u might need to reinstall the operating system.
 

http://www.techspot.com/community/topics/universal-serial-bus-on-motherboard.206796/
Relevancy 20.21%

Hi,

I was looking to upgrade my Dell Insprion 2330 all-in-one PC to a solid state drive, to improve the performance. Firstly, is this possible? If so, is it practical?

Currently I have the factory 2TB hard disk installed and it seems a shame to loose all that storage space. From what I have seen it may be possible to replace the blu-ray drive with a SSD instead? Primarily I would be looking to run my operating system of the SSD and then use the existing drive for the bulk of my storage. That being said I am not sure if I would want to loose my blu-ray player either. I don't use it all that much, but it is still nice to have it there. I understand I may need to make some compromises to make the upgrade, so hopefully someone will be able to point me in the best direction and tell me whether it is really worth it. My PC doesn't run slow my any stretch, but from what I have seen it can make a big difference!

Thanks in advance,

Alex
 

A:SSD upgrade for Dell Inspiron 2330, is it possible?

Technically speaking, yes you could replace the hard drive with an SSD. I have never changed anything (hardware wise) with an All-In-One unit, but it must be possible. If you are looking to keep the extra storage space, you could take the 2TB hard drive and put it in an external hard drive case and connect it to one of your two USB 3.0 ports. That way you still have storage space to use while keeping your Blu-ray drive and having a SSD for your Operating System and Programs. It wont be as fast as leaving it inside connected with a SATA cable, but it will be better then connecting it USB 2.0 or not using it at all. If you do go through with this "venture", take photos and document what you did each step and then post them up here. May come in handy for someone else in the future.
 

http://www.techspot.com/community/topics/ssd-upgrade-for-dell-inspiron-2330-is-it-possible.206923/
Relevancy 23.65%

Hello all

I have a HP Pro 3405 Microtower PC and I recently reinstalled Win 7 Ultimate.
Now I did a very stupid thing, I managed to install a DDR 2 1GB RAM on a DDR3 DIMM slot, don't ask me how but I did. There was also a DDR3 2GB RAM already there.

I quickly took out the DDR 2 and restarted the system, since then I've been getting 5 beep at startup which means "pre-video memory failure". I reseated the RAM, nothing changed. I looked on google on how to fix it but nothing worked.

I ordered another 2GB RAM from Offtek, same specs as the original RAM stick.
When I tried to install it today, it still was giving me the 5 beep code.
I've tried reseating it, resetting the BIOS, taking out the PSU... nothing >.<

Have I fried my motherboard? Or is there a solution I haven't tried yet?

Thanks in advance
 

A:RAM 2x 2GB on motherboard

If you have tried all that you speak of, sounds like you really messed up your motherboard. I don't think there's much you can do. Maybe if you know what form factor the motherboard is, you can replace it with one like it. If you don't know more then how to replace the RAM in a computer, I would not recommend going strait to replacing a motherboard.
 

http://www.techspot.com/community/topics/ram-2x-2gb-on-motherboard.205839/
Relevancy 39.99%

The computer won't boot giving the led code 00. Also ALL the pins look bent to me, should they be diagonal like that or pointing straight up?

Click the pics to zoom in.

With my 4690K the computer won't boot.
 

A:MSI Z87-GD65 GAMING do I have bent pins?

Double check the manual, but I'm almost positive 00 is not a valid code for those boards. Which would imply there's a problem with the board, not the CPU

EDIT: LIttle google'ing. If it's a D0, a few previous owners say it's a bios issue you can reset
http://linustechtips.com/main/topic/97169-msi-z87-g65-debug-code-00/
 

http://www.techspot.com/community/topics/msi-z87-gd65-gaming-do-i-have-bent-pins.206032/
Relevancy 16.34%

I replaced the mobo on my Dell 5510. Purchased from Dell. Sticker on mobo says BIOS ver A05. About every other day I get blue screen and physical dump of memory. My system info says my BIOS ver is A07. How do I go about changing BIOS? Is it as simple as pulling battery for 15 seconds? Some have offered this suggestion but I get a little worried at "friends" advice.
 

A:Replaced MOBO on Dell 5510 BIOS sticker on MOBO says A05, system in still has BIOS of A07

Removing the battery won't change the BIOS version. You need to download the version you require from the Dell site. From Windows you "flash" the BIOS. Take your time preparing for this. If anything goes wrong you will wreck your motherboard.
 

http://www.techspot.com/community/topics/replaced-mobo-on-dell-5510-bios-sticker-on-mobo-says-a05-system-in-still-has-bios-of-a07.206391/
Relevancy 22.79%

Hey guys, building a new PC, and I decided not to go too cheap with core components and leave the video card until later, while still getting everything in one go. Now this being the case, I will need to run non-dedicated graphics for a while (which are decent nowadays). Anyway, I want to go with the Gigabyte GA-F2A88XM-D3H Motherboard and an AMD A10-6800K Richland CPU,

Will the video outputs on the motherboard work with the APU and will I be able to use integrated video until I get a dedicated video card?

The Newegg page for the motherboard says "Integrated Video: None", so I am a little bit confused, is there no integrated video chipset because that's what the CPU is now being an APU?
 

A:AMD A10-6800K with what motherboard for integrated video?

I just built a home office build system for my parents using that exact board with an A4-6300 Richland in a Cooler Master HAF 912 (I really like this case for microATX boards). The board was great to work with and since the APU is on the chip itself my folks didn't need to purchase a video card.

So to answer your question: Yes you'll get your video.

* I would seriously consider getting an aftermarket cooler to replace the heatsink that comes with it.
 

http://www.techspot.com/community/topics/amd-a10-6800k-with-what-motherboard-for-integrated-video.205551/
Relevancy 23.22%

Hello I upgraded my cpu a while ago without checking if my mobo could run it.. worked fine on low usage but when I tried to stress the Cpu the pc died and wont boot/post. Is it the cpu or motherboard that takes damage from this? (Or both?)
I tried with my old cpu but with same result.
/ Andreas
 

A:125W cpu on 95W motherboard

Can you link us to your motherboard, your new cpu and your old one as well?
 

http://www.techspot.com/community/topics/125w-cpu-on-95w-motherboard.206146/
Relevancy 22.36%

Hi,
So I have noticed my pc would shut off randomly and its because the 24 volt connector wasn't in all the way so when the pc would move slightly the connector would disconnect itself. When I go to push the 24 volt in all the way it wont clip onto the clip on the motherboard. It will stay in but it wont fully go in and I can easily just pull it out or it will just fall out from movement. Any ideas how to fix this?
Motherboard- http://www.newegg.com/Product/Product.aspx?Item=N82E16813130741
PSU- http://www.newegg.com/Product/Product.aspx?Item=N82E16817139026
 

A:24 Volt connector wont fully connect to Motherboard

I think it is not 24 volts. it is a 24-pin(also labelled as 20+4pin) , 12volts main power connector.
the slots are designed so that the power connector will slide into the slot to form like a 'lock and key'. to remove it.
see to it that the power connector is inserted in the right direction as shown in the pics (towards the side):


edit, any moderator: please delete this post.
(my second post to this thread is more 'presentable')
 

http://www.techspot.com/community/topics/24-volt-connector-wont-fully-connect-to-motherboard.206189/
Relevancy 22.79%

Just bought a new board and I dont know how to get my geforce gts450 card working
 

A:New motherboard failing to show my card

Have you installed latest NVidia driver pack compatible with your operating system?




www.nvidia.com/Download/index.aspx?lang=en-usClick to expand...


 

http://www.techspot.com/community/topics/new-motherboard-failing-to-show-my-card.206126/
Relevancy 19.78%

I have a Dell Latitude D630 and the motherboard died, It's out of warrenty so I bought a Motherboard on ebay. The Bios Service Tag does not match the number on the bottom so I would like to chage it to the correct one. How can I do this?

I read about a DST CD = Dell Service Technician CD that has this option but I can't find one.

It's not a real important thing but when I use the Dell System ID application it reads the Bios Service tag and not the real system tag that Is registered to me.
 

A:How to change the Service Tag in a Dell Latitude D630 BIOS

http://en.community.dell.com/support-forums/laptop/f/3518/p/19258463/19430485.aspx
 

http://www.techspot.com/community/topics/how-to-change-the-service-tag-in-a-dell-latitude-d630-bios.165117/
Relevancy 23.65%

Hi, i currently have 2 x 1GB sticks of ram in my motherboard at the moment and wondered if i could buy a 4GB stick of ram and use it in conjunction with one of my 1GB sticks of ram, is this possible?
 

A:RAM 1GB & 4GB on motherboard

What are the specs of your pc? how many ram slots do you have spare?

DDR memory must be used in identical pairs for it to operate in dual channel mode. also if your using a 32 bit operating system only 4GB of memory will ever be used by your system.
 

http://www.techspot.com/community/topics/ram-1gb-4gb-on-motherboard.172809/
Relevancy 23.65%

So Im looking for a new motherboard here are my current specs MSI H a Looking Motherboard new for M-P LGA Intel H SATA Gb Looking for a new Motherboard s USB Micro ATX Intel Motherboard Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR Looking for a new Motherboard SDRAM - PCI Express x Intel Core i - K Haswell Quad-Core GHz LGA W Desktop Processor Intel HD Graphics BX I K G SKILL Ripjaws X Series GB x GB -Pin DDR SDRAM DDR Zotac ZT- - L GeForce GT Graphic Card - MHz Core - GB GDDR SDRAM - PCI Express x So this was my first build and it went great did make the mistake of getting a micro ATX and I have a massive case things that bother my about my current motherboard is that I dont have enough SATA plugs I have alot of hard drives and second I just got monitors and it only has PCI plug So Im also thinking about getting another graphics card to run of my monitors and having my current one run the other I was thinking of getting another GT but I do have a gtx sitting around would they work together Also if you have any advice about changing motherboards and not having to re-install OS clean that would be great nbsp

A:Looking for a new Motherboard

Well you also made the mistake of buying the GT 640 because the gtx 260 is fair amount faster.
 

http://www.techspot.com/community/topics/looking-for-a-new-motherboard.205517/
Relevancy 23.22%

Hi, I'm building a budget gaming PC but I don't know what motherboard to get. Here's the parts I'm planning on buying:

Intel Core i5-3570
Corsair Builder Series CX 430
Radeon HD7850

A H77 board will do as the cost of a K cpu and Z77 board (I presume) would cost way more. I'm thinking something around the price of a Asus P8H77-V LE.

Thanks
 

A:What motherboard should I get for my build?

It matters on what brand you buy. Some H77 motherboards come close to low end Z77 boards. Also, the 3570K is just $20 more and allows for you to unlock your system fully as long as you have proper cooling.

If you would like, I can take a look at your build and recommend better components if I see it fit. Just provide me with a budget .
 

http://www.techspot.com/community/topics/what-motherboard-should-i-get-for-my-build.203630/
Relevancy 23.22%

Please suggest me a best motherboard (upto Rs. 6000) and a PSU for AMD FX-6300 processor.
 

A:Motherboard for amd fx-6300

Why not try the MSI Gaming 970 motherboard, its pretty inexpensive and a decent motherboard. Where do you shop?
 

http://www.techspot.com/community/topics/motherboard-for-amd-fx-6300.205255/
Relevancy 20.21%

I have a Dell Optiplex 745 desk top form.ik it isnt THE best comp, but im wanting to upgrade the graphics card and power supply if I have to. just dont know where to start QQ inoob... any help would be appreciated ty

Operating System: Windows 7 Professional 32-bit (6.1, Build 7601) Service Pack 1
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: OptiPlex 745
BIOS: Phoenix ROM BIOS PLUS Version 1.10 2.6.4
Processor: Intel(R) Pentium(R) D CPU 3.40GHz (2 CPUs), ~3.4
 

A:Graphics card(s) for Dell Optiplex 745

Current power supply wattage and budget?
 

http://www.techspot.com/community/topics/graphics-card-s-for-dell-optiplex-745.200179/
Relevancy 20.21%

Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.
 

A:Dell 27" 5K Monitor

VitalyT said:





Dell is releasing a new 5K monitor in Q4 this year. That's your ideal 2560 x 1440 quadrupled for retina effect, while keeping the perfect proportions, with the software that supports it that is, for the total of 5120 x 2880 madness.Click to expand...

And I thought 4K was crazy high resolution already xD.
 

http://www.techspot.com/community/topics/dell-27-5k-monitor.205015/
Relevancy 23.22%

I have an old Acer Aspire m3100 desktop and the case to it is broken, I have another case for it but I do not have the installation manual to show me how to reconnect all of the connections from this other case. How can I get or find the diagram showing how to make all connections to this motherboard. I'm trying to restore this computer for my grandson? any help would be appreciated, I've tried contacting Acer but they won't help unless the computer is under warranty and their third-party support doesn't do hardware issues?? I also downloaded a manual from online but it doesn't show the right info.
 

A:Motherboard Installation manual

Check this is the right motherboard.

http://www.gigabyte.com/products/product-page.aspx?pid=2500#ov

The manual is available in the support and downloads section.

Case wiring is pretty standard in most cases (no pun intended). Any details you have about the case your switching to would be helpful.

Motherboards mostly have the names of sockets screen printed next to them.
 

http://www.techspot.com/community/topics/motherboard-installation-manual.205022/
Relevancy 19.78%

First of all I would like to sincerly thank Techspot memeber Richard for saving me the cost of a new computer with his posted solution to the closed thread Dell inspiron will not turn on I m was so impressed with Richard s solution that I was compelled to joing Techspot and post this thank you and my Dell 1564 turn on solution will not Inspiron comments I have never posted previously so I hope I m within Techspot protocol A few hours ago my Dell Inspiron would not turn on it appeared that no AC power was getting through the power switch my computer was dead I tried changing batteries using the power cord without a battery plugging the ac power cord in while holding the power button down I tired everything to no avail I went shopping online on my wife s laptop for a new machine On a whim I did an internet search on my Dell Inspiron will not turn on and got directed tp the Techspot thread which contained Richard s solution As Richard instructed I disassembled my failed laptop disconnected and then reconnected the touch pad plugged in the power cord hit the power button and bingo my laptop came on just like it has hundreds of times before This procedure took me about hours I have taken apart about half a dozen laptops over my computing years There is obviously a weakness in the Inspirons around the Sleep Hibernate functions and the mechanism when the laptop Dell Inspiron 1564 will not turn on solution is closed which triggers these functions The mechanism appears to be somehow tied into the touchpad So disconnecting and then reconnecting the touchpad resets the functions I just had a thought I wonder if disabling and then enabling the touchpad through the windows control panel would do the same thing as physically disconnecting and reconnecting the hardware It would be a lot easier and quicker fix then disecting a laptop Oh well hopefully it won t happen to me again so I will never know I ve diabled the sleep and Hibernate functions on my computer so hopefully It won t have another near death experience It will of course die naturally one day that much I know is true thanks again Richard for your solution and thank you Techspot for this forum nbsp

A:Dell Inspiron 1564 will not turn on solution

How would you get to the control panel to disable it if it won't turn on?
 

http://www.techspot.com/community/topics/dell-inspiron-1564-will-not-turn-on-solution.179813/
Relevancy 22.79%

Hi, I just installed a gigabyte ga-z77x-d3h into my system (i5 3570), and even after reinstalling windows the computer is very glitchy, it takes ages to come on, freezes, and usb devices don't work half the time.

I'm thinking it's a dodgy motherboard. Any ideas?
 

A:System is very glitchy after installing new motherboard

Actually my first post was wrong, (this is someone else's computer) reinstalling windows fixed the glitches it just pauses on the windows logo for about five minutes before booting up.
 

http://www.techspot.com/community/topics/system-is-very-glitchy-after-installing-new-motherboard.204643/
Relevancy 22.79%

I got this desktop computer that has a Asrock board in it Model # FM2A75M-DGS and it comes up with the boot screen and I try to get in to boot settings or anything and it wants a password. I have no clue what the password is and I need help to see if it can be reset. I have looked on the internet everywhere and have had no luck. If I pull the battery will that reset it......help me please. Thanx
 

A:Forgot Password On Asrock Motherboard

Removing the motherboard battery and waiting a couple minutes before replacing it should reset it to where you can gain access again. It should help you. If not then reset your jumper to clear the CMOS. You can get the jumper resetting instruction in the motherboard manual.
 

http://www.techspot.com/community/topics/forgot-password-on-asrock-motherboard.204604/
Relevancy 22.79%

Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping
 

A:Upgrading CPU, question about motherboard compatability

Vidosoli said:





Hey guys just another quick question about my motherboarding and CPU. Currently I am not satisfied with my CPU at all and I'm thinking of upgrading to this
http://www.novcomputer.bg/bg/i5-4670-34g-6mb-box-lga1150.html
and my current motherboard is this
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=1091
on that ^ website it says that my current motherboard supports the CPU that I linked, however my PC technician says that I also have to upgrade to a newer motherboard that can support that CPU that I want. My question is is that really the case? Can my motherboard run that CPU or is it really too old?
Again thanks for reading/helping Click to expand...

No, that motherboard is LGA 1156 while the i5 4670 is LGA 1150. You would need a new motherboard to go with that CPU>
 

http://www.techspot.com/community/topics/upgrading-cpu-question-about-motherboard-compatability.204453/
Relevancy 19.78%

Hi Guys,

I would like to seek help regarding my laptop (Dell Inspiron 3437). I oftenly encounter a very slow start up/booting and also there are times that shutting it down takes too long also as if it is not responding, which will result to forced shutting it. I need help in this.

Thanks you very much.
 

A:Dell Inspiron 3437- Startup and shutdown problem

Which Windows and how much free space do you have?
 

http://www.techspot.com/community/topics/dell-inspiron-3437-startup-and-shutdown-problem.204241/
Relevancy 23.22%

Hi all,

I have heard of somethings like computer manufacturer and motherborad manufacurer. For example some time ago, when I had problem with my desktop PC, some asked me what's your computer manufacturer and motherborad manufacurer?
what's the difference between these two please?
 

A:Computer/motherboard manufacturer

Computer manufacturer Is most of the time is Dell, Hp,Compaq, Ausu are a few.
Motherboard manufacturer . Asus, Gigbyte, Asrock. Msi, Are a few. This is what they are referring to. When they ask you those Questions .
 

http://www.techspot.com/community/topics/computer-motherboard-manufacturer.204218/
Relevancy 19.78%

Hi all,
couldn't able to turn on my laptop. I tried the following http://h30434.www3.hp.com/t5/Notebo...-on-when-I-push-the-power-button/td-p/1905373

but couldn't be able to turn on normally.

when I try to push the power button and next one button don't this is for what purpose, may be for restart. push again and again this turn on the laptop.

but after shutdown the loptop, unable to turn on it again.

can any one help me?
 

A:Laptop dell latitude e4300 don't turn on

Did you remove the battery and try to start the laptop using only the AC adapter?
 

http://www.techspot.com/community/topics/laptop-dell-latitude-e4300-dont-turn-on.204178/
Relevancy 23.22%

In hardware monitor, reading 13.2v on the 12v line.

PSU: http://www.newegg.com/Product/Product.aspx?Item=17-151-107

MOBO: http://www.newegg.com/Product/Produ...30790&cm_re=970_gaming-_-13-130-790-_-Product

Should I be worried? BTW im already about to RMA the motherboard because of broken sound. (might these be related?)
bbasically should I be worred about the immediate health of other parts or something
 

A:12v on motherboard reading 13.2v

What does your boards BIOS voltage monitoring read ? When you say hardware monitor I assume you are talking about the utility?
If this is the case then HW Monitor can have reporting issues with certain chipsets and boards.
If you're reading the voltage from the BIOS's hardware monitor then it could be a faulty voltage sensor (likely), or a PSU running out of specification. Checking the PSU shouldn't present much difficulty if you have access to a multimeter or just have an electrician test the output.
 

http://www.techspot.com/community/topics/12v-on-motherboard-reading-13-2v.204199/
Relevancy 22.36%

Hello to all I m going to install Win XP properly port The ps/2 of doesn't work the motherboard on my computer I had win but had some problem with installing the HP printer on it and so I decide to install XP because that printer seems to be installed properly The ps/2 port of the motherboard doesn't work properly on XP Now When I put the XP CD on the CD driver it says press a ker to boot from CD and I press the Enter key now the keyboard works after that within installation time when that I should press Enter to install XP this time the keyboard doesn t work My guess is that the ps port of the case has problem it s old and somewhat has been broad Now what is the solution in your point of The ps/2 port of the motherboard doesn't work properly view please My system manufacturer is quot ECS quot and the system model is quot pl-A quot PS there are two black amp white screens which mobo shows First screen shows the amount of RAM the model of CPU the IDEs and info like these which is common for first screen But the here when I want to enter to BIOS by pressing Del key it seems that keyboard doesn t work so it doesn t go to bios The second black amp white screen shows fewer info and it says quot Press shift-F to configure and when I press these two I can to enter to an environment that seems to not be the BIOS the keyboard here WORKS It has very few options And apparently doesn t have options of manipulating the keyboard settings nbsp

A:The ps/2 port of the motherboard doesn't work properly

No idea!!?
 

http://www.techspot.com/community/topics/the-ps-2-port-of-the-motherboard-doesnt-work-properly.204104/
Relevancy 22.36%

I ve got this legendary socket motherboard DFI LP UT SLI-DR Expert chipset nForce SLI almost new only LanParty - UT using BIOS DFI Del motherboard enter Cannot key Expert SLI-DR NF4 one SATA port is somewhat messed up missing those plastic parts from both sides bought this baby really cheap from well known Romanian e-bay like site okazii ro and I put it on my FX- dual core yeah THAT one and some KINGSTON value memory and tried to boot my rig Here is my problem now this board is Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard working those red diagnostic LEDS start next only one left so no quot LEDs of death quot syndrome for me and the onboard speaker beeps ONCE which I know is always a good thing but I cannot enter BIOS to setup as I need Del key on my PS keyboard is NOT working as it should I press the key and the result is nada nothing first I see the boot logo from Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard DFI after that Cannot enter BIOS using Del key - DFI LanParty UT NF4 SLI-DR Expert motherboard I see this error message quot CMOS checksum error - defaults loaded press F to continue or Del to enter setup quot and when I press Del I get nothig and when I press F key sometimes I see this message quot Verifying Pool Data and Backup CMOS OK quot and other times I see quot Sil SATA RAID Press Ctrl-S or F to enter RAID utility quot One more thing to add is that I can actually use boot menu selection using Esc key to selct HDD CD-ROM or some other option and this board actually can boot using CD DVD I already tried UBCD rescue CD and some Linux live distros to see if it s not a problem with my FX- processor and I m happy that it is working well is all good no problem here actually I ve seen it s name and working frequency Mhz at POST please help me to solve this problem with my mobo nbsp

http://www.techspot.com/community/topics/cannot-enter-bios-using-del-key-dfi-lanparty-ut-nf4-sli-dr-expert-motherboard.204105/
Relevancy 21.93%

Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.

Is there a way to tell which bios I need or what model I now have?

Thank you,

Steve
 

A:Replaced Failed Motherboard.. now how do I determine model number and which BIOS to download?

Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.

HP Support, Drivers, Contact and Help Forums | HP Support
 

http://www.techspot.com/community/topics/replaced-failed-motherboard-now-how-do-i-determine-model-number-and-which-bios-to-download.203956/
Relevancy 19.78%

Hello everyone.
I have a Dell Latitude E6410 laptop, which I bought it as a used laptop. Last week, while I am using it to browse websites, it SUDDENLY shutdown, then I try to turn it on again by pressing the power button, but it doesn't turn on. I look at the power adapter, it's green light is FLASHING. When I disconnect the power adapter from the laptop, the light on the power adapter is STEADY green. As soon as I connect the power adapter back to the laptop, its green light is FLASHING again. I also tried to turn on the laptop by using the battery, but it doesn't turn on. There is NO sound or light on the laptop at all. What's wrong with my laptop, is the motherboard dead? Sorry for a long message. Thank you very much for any help.
 

A:Dell Latitude E6410 Suddenly shutdown

Remove the battery and the AC Adapter and hold the power button down for at least 30 seconds. Put the AC adapter in and leave the battery out. try powering it up again
 

http://www.techspot.com/community/topics/dell-latitude-e6410-suddenly-shutdown.203637/
Relevancy 18.92%

Good day chaps, yesterday night I was casually playing a game (Aion > mmorpg) and I decided to put some music on(it was on browser, YouTube), when I pressed alt+tab to change it it started flashing telling me the exact issue : AMD DRIVER CRASHED AND FAILED TO RECOVER.

I got a bit scared when it gave me a blue screen, so I thought of asking for any tips or clues why it does that~

For unkown reasons, I can't upload the .dmp file saying either its empty, or The uploaded file does not have an allowed extension.

Hope you can help me and thanks a buck!~
 

A:Dell Inspiron 3512 AMD Radeon HD 8500/8700M crashed and failed to recover

Upgrade the driver and see if this helps.
 

http://www.techspot.com/community/topics/dell-inspiron-3512-amd-radeon-hd-8500-8700m-crashed-and-failed-to-recover.203323/
Relevancy 19.78%

I have a Dell Latitude D that I dropped while in its carrying bag so even backlight Dell screen Latitude replacement no after it wasn t a real hard landing Now the backlight won t come on I swapped an entire screen assembly from an identical D and it still won t turn the backlight on I swapped the screens again and the borrowed D still works fine and mine won Dell Latitude no backlight even after screen replacement t work I didn t bother to test my screen in the borrowed D I can run an external CRT with mine and I can see the LCD display if I shine a light on it so I know the display is working and not cracked The laptop won t drive the CRT Dell Latitude no backlight even after screen replacement unless it thinks the lid is down so to use the keyboard I removed the sense magnet from the lid and taped it to the place where it would be with the lid closed I ve noticed in the past that this D often stayed fully on including the display it seemed when I closed the lid and walked away for hours Note When I tested the borrowed screen I had the sense magnet removed When the magnet is taped in place simulating lid down both the backlight and the display are off I can t see the display even when a light is shined on it but when the magnet is removed simulating lid up I get the display with no backlight It seems like the display knows whether the lid is up or down but the backlight seems to act like the lid is always down Is this possible What should I look for nbsp

A:Dell Latitude no backlight even after screen replacement

Did you replace the backlight inverter?
 

http://www.techspot.com/community/topics/dell-latitude-no-backlight-even-after-screen-replacement.198916/
Relevancy 19.78%

I have a Dell Inspiron 6000 laptop which I have just discovered has a faulty battery, and although it is plugged into a power socket, won't start up. Any thoughts on how I can get around this?
 

A:Starting Dell laptop when battery faulty

Remove the battery...
 

http://www.techspot.com/community/topics/starting-dell-laptop-when-battery-faulty.202880/
Relevancy 23.22%

I was planning on using the lowest i5 processor but because of the refresh I lost the older ones.
The ones that are available are:
Intel Core i5 4460 (3.2GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4590 (3.3GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4570S (2.9GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4670 (3.4GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4690 (3.5GHz HD4600 6MB Cache) Quad Core
Intel Core i5 4670K (3.4GHz HD4600 6MB Cache) Quad Core
 

A:What CPU's are compatible with the MSI B85-G43 Gaming Motherboard

http://www.msi.com/product/mb/B85G43.html#/?div=CPUSupport


Code:
Core i7 [ 4771,4770T,4770S,4770K,4770,4765T ]
Core i5 [ 4670T,4670S,4670K,4670,4570T,4570S,4570,4440S,4440,4430S,4430 ]
Core i3 [ 4340,4330T,4330,4130T,4130 ]
Pentium [ G3430,G3420T,G3420,G3220T,G3220 ]
Xeon [ E3-1240V3,E3-1230V3,E3-1220LV3 ]
 

http://www.techspot.com/community/topics/what-cpus-are-compatible-with-the-msi-b85-g43-gaming-motherboard.202560/
Relevancy 22.36%

This is the link of my motherboar....... http://vr-zone.com/articles/xfx-unveiled-intel-g31-based-xg31i-board/6218.html?doc=6218

I want to know whether I can use a DDR3 Graphics card on my DDR2 motherboard and if its certain to work. Please provide detail and whether it'll be compatible.
 

A:Can a DDR3 graphics card run in a DDR2 Motherboard?

The DDR2 slots on the motherboard refer to the desktop RAM sticks. GDDR3 on a graphics card doesn't make any difference, it's the connector (PCI Express 2.0 probably) that slots into the mobo.
 

http://www.techspot.com/community/topics/can-a-ddr3-graphics-card-run-in-a-ddr2-motherboard.202813/
Relevancy 19.78%

Hello,

Hope everyone is fine and well.

My said laptop is having severe heating problem with my Latitude E6430 i5-3360M upgraded to Windows 8 Enterprice 64 bit OS.

It is getting heat up too much from left side and exhausting the battery earliest.

Just one issue that can I see in it that Teredo tunneling pseudo interface shows a yellow exlamation mark in Device Manager. Windows 7 Ultmate 64 but I cannot find the solution to mitigate it.

Your expeditious help is requested to resolve the above problem.
Tariq ALi
 

A:Dell latitude e6430 heating problem

You require to uninstall and then re-install the device which shown the exclamation mark in device manager, otherwise require to run the device driver further.
 

http://www.techspot.com/community/topics/dell-latitude-e6430-heating-problem.202527/
Relevancy 20.21%

My dad was putting some paper into his printer and had apparently put the paper in too far. When he tried to print something it jammed up and the printer had abruptly shut off. I have tried leaving it unplugged for a while and plugging it back in however, the printer WILL NOT turn back on at all.
 

http://www.techspot.com/community/topics/dell-3510-printer-issue.202348/
Relevancy 19.78%

The computer has 2 750gb hard drives in it but I noticed it was awful slow for a dual quad core computer with win 7 64 bit and 16gb of ram so I checked in the bios and I don't really see a way to turn it completely off unless the hard drives are reformatted in some way. If someone is familiar with this problem please help. I have disconnected one drive and re-installed windows on the other for now.
 

A:How do I turn off raid mode on a Dell Precision T5400

You can't just take drives that have a RAID array on them and expect them to work when you turn RAID off. You'll need to re-format.

Anyway, the Dell BIOS has an option for HDD mode, it's in there.
 

http://www.techspot.com/community/topics/how-do-i-turn-off-raid-mode-on-a-dell-precision-t5400.202235/
Relevancy 22.79%

Hello My sound chip on my board was blew for no reason bad thing only being a month old bored and I am not waiting days to rma it and for me to get it back anyway I managed to pick up a old sound card not sure on the model Motherboard? Work. Not Maybe Did Sound Card that worked fine for three days then stopped outputing audio so I bought a sound card intex cmi that did not have the bit wndows dirvers and everytime I turned the computer off the machine would not detect the card I then I have to press the reset button or turn the system a few times to get the card to be recognized again and I could not also find the drivers for the OS Sound Card Did Not Work. Maybe Motherboard? I checked at the back of the cards box and it says bit pci bus master What does the mean could that be that the card was not compatible for the stystem or could it be the motherboard I tried a nvidia video card in the Sound Card Did Not Work. Maybe Motherboard? PCI-E slot and the card works fine with no faults The sound card was using the PCI slot and I tried every PCI slot My Motherboard asrock fm a x extreme Thanks nbsp

A:Sound Card Did Not Work. Maybe Motherboard?

I tested in a very old card from 2001 or 2004 something like that and it appears there's power going through the card so that's the plus.
Maybe it's because I'm using old crap and the sound card model is old?
 

http://www.techspot.com/community/topics/sound-card-did-not-work-maybe-motherboard.202240/
Relevancy 20.21%

hello to all ,
I find the threads very intresting and helpfull for a gizzer guy, well here goes ,my daughter has a PP29l dell that won't power up and she ask ,dad can you fix this? so I say Let me look at it. I then went to your tech site and learded how to take it apart to fix the problem of: powers up for one moment ,fan runs then stops , no screen, according to SimonEast I'm looking for a mag sensor labled u1 but having trouble locating it . is it in the board above the two mouse pads or on the mother board or in the display screen?. as far as i can tell the small board above the pads won't remove very easily,need a little more price guidence.
thanks
 

A:Dell PP29L stops running after a second

What is the Service Tag or the Express Service Code number?
 

http://www.techspot.com/community/topics/dell-pp29l-stops-running-after-a-second.178562/
Relevancy 61.92%

Hi everyone, I have a problem.
I pinmodded an LGA771 Xeon to work with my LGA775 motherboard. I decided to do it the hard way and use aluminum foil and tape to pin mod it. I think it worked out fine but anyway, on to the problem.

When I cut off the LGA775 alignment pieces, I accidentally bent 2 pins out of shape a little. Initially, I didn't notice, so I put in the Xeon to try it out, didn't work.
Then I tried my old processor, also didn't work (worked fine previously).

So then I noticed the pins and bent them back into shape, AFAIK it is perfect and you can't even tell that anything happened.
Tried both CPUs, nothing, no beeps, no signal to the monitor.

Is it possible to damage my motherboard if I didn't do the pinmod correctly?
Is it possible that I damaged my processor or motherboard by trying to run it with those 2 pins out of place?

Help please
 

A:Bent motherboard pins, fixed but now will not boot

I am not really sure, but my guess is you did not do the pinmod correctly since both CPUs do not work. I hope someone else can provide some insight on this issue. Good luck!
 

http://www.techspot.com/community/topics/bent-motherboard-pins-fixed-but-now-will-not-boot.198999/
Relevancy 22.79%

Hey guys,
I have been reading articles and forum posts on this site for a while, but have decided to post something.

I am trying to install a Sun Ultra 24 Workstation into a case, but do not have a wiring diagram for the wires for the PWR, RST and LED's for the board. I have looked every where I can think of, can any of you please help me.
 

http://www.techspot.com/community/topics/motherboard-wiring-diagram-for-sun-ultra-24.201951/
Relevancy 20.21%

Well, my HP laptop charger is not working so I tried to charge with a Dell charger I had and it worked.

Now reading in the internet, I read that it might be dangerous especially since I am using less amps than specified. The specs of the 2 chargers are as follows:

HP Charger: 19 V, 4.74 A
Dell Charger: 19.5 V, 4.62 A

I read that the voltage difference should not cause a problem but using a lower Amp capacity charger than the original might. Will this small difference matter or can I still use the charger?

Thanks
 

A:Can I use my Dell Charger to charge my HP Laptop?

In a word... Yes. As long as the Dell chargers connector fits snugly and it doesn't get too hot, it should be fine
 

http://www.techspot.com/community/topics/can-i-use-my-dell-charger-to-charge-my-hp-laptop.201113/
Relevancy 22.79%

Guys many people say I cant because the G41 has only a pci express slot 2. If its correct please tell me a vga to buy..
 

A:Can i get the full performance of a Gddr5 vga from a G41 motherboard?

Could you please specify what Make and exact model the motherboard is? G41 does not help much. Is it Intel, Gigabyte, MSI, etc... More information is needed before we can help you.
 

http://www.techspot.com/community/topics/can-i-get-the-full-performance-of-a-gddr5-vga-from-a-g41-motherboard.201712/
Relevancy 23.22%

Hi guys,

I'm going to find the following info about new/recent computers. Is there anyone who likes to help?

1-Where the BIOS is stored on the motherboard? Inside the ROM, EPROM or something like USB storage on the motherboard?

2- I have also heard that this (BIOS) is stored into CMOS and a battery supplies the power for the settings of the BIOS, correct?

3- Also I have read that in the new motherboards there is a jumper that can delete the settings of the BIOS. What's your thoughts?

Thanks in advance.
 

A:BIOS & ROM on the Motherboard

1. See #2
2. CMOS is correct, sometimes these are removable chips.
3. Yes, many motherboards have a jumper to reset to defaults, this is pretty important for overclockers, because you can set the BIOS to settings that are so unstable the computer can't get to the BIOS.

4. Your definition of recent/new is not in alignment with what most people would say is new. Motherboards for a few years now have been shipping with UEFI rather than a traditional BIOS.
 

http://www.techspot.com/community/topics/bios-rom-on-the-motherboard.201654/
Relevancy 22.36%

I have put together a new build with the Gigabyte Assassin 2 m/board and a Corsair AX 860i PSU. On start up the PSU clicks out and won't run. The PSU Self test is good - green light and the fan is running, however when I connect all the peripherals the PSU just drops out and will not run. I have double checked all connections from the CPU, M/board, memory, graphics cards. This is all in a Thermaltake Level 10 case, my next check will be the hard drive connections - hot swap bays. Any help will be really appreciated.
 

http://www.techspot.com/community/topics/gigabyte-g1assassin-2-motherboard-corsair-ax-860i-wont-power-up.201388/