Windows Support Forum

Touch screen/pad going nuts

Q: Touch screen/pad going nuts

My touchscreen will all of a sudden act like someone is touching it all over the place....if I close the laptop up and reopen...usually it resets for awhile....but will come back.....of course right at the wrong time.....the mouse pointer goes wild...jumping all over the screen trying to get to wherever the ghost has touched!!! I have tried drivers...uodated software help yet!!
Relevancy 100%
Preferred Solution: Touch screen/pad going nuts

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 76.54%

Occasionally, the screen gets erratic.  Opens and closes windows and programs.  Resizes windows and text.  If I close all open windows, there are little white 'bubbles' in the bottom center of the screen that move up and down as if the screen is being touched.This has been a problem since I purchased the laptop, but I haven't been able to find a solution.I seldom use the touch screen anymore because of this.  And I try to avoid the touch pad also.   But even when using a mouse, the problem occurs.    It's very random and I cannot reproduce the problem.Auto HP updates are on and all software and drivers should be current.Internet connection is wireless.Purchased laptop in Aug 2015 with Windows 10 pre- installed.   All Win10 updates are current.I've searched HP Support but cannot find this problem mentioned.
Relevancy 57.62%

Can we replace the capacitive touch controller or is it fixed?

A:Can one capacitive touch screen be replaced by a resistive touch screen?

Can you please provide more details?
What device do you mean?
Relevancy 55.9%

My Ideapad S415 touch screen has suddenly stopped working.  I've had a tech connect to my PC and try a BIOS reload of default settings, plus unistalling all "HID" devices in Device Manager with no resolution.  I've also tried a system restore with no luck. The system properties does see the touch capability. Suggestions? Thanks.

Go to Solution.

A:Ideapad S415 Touch - touch screen stopped working

hi Hersh,
Welcome to Lenovo Community Forums!
First do a Power Drain 
     (If the battery is removable)
            Remove AC and Battery and hold the power button down for 15 sec.
               Turn the computer back on and see if the Touch capability is now detected under System Properties,
                  If not
         I suggest you contact Lenovo Technical Team about the Issue as this may be a device detection issue.
       Lenovo Technical Team
Solid Cruver

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
Relevancy 55.47%

Hello nbsp My Thinkpad Yoga is connected to a large display through ThenkPad docking station nbsp screen generates touch while random touch lid... Yoga Its lid is closed nbsp During my work from time to time I see random touch clicks on my screen and random opening of menus nbsp It is clear that the touch screen is active Yoga touch screen generates random touch while lid... although the lid is closed nbsp When I open the lid and still connected just to the nd display large screen display the phenomena stops nbsp Worth noting is that although only the nd display shows an image the laptop touch screen is still sensetive to touch nbsp This is I guess why the random touches show up on the screen -- it feels the keyboard not fingers nbsp I expect the touch screen to be disabled while the lid is closed or when projecting only to the nd screen nbsp The solution of opening the lid while connected to the docking station is not acceptable nbsp Lenovo's local support suggestion to disable touch for the Yoga is also not acceptable -- people purchase Yoga to get Touch nbsp nbsp A solution please nbsp Yaron

A:Yoga touch screen generates random touch while lid...

I am experiencing the very same thing.A driver/BIOS update would be very much appreciated, dear Lenovo.
Relevancy 55.47%

I bought new, but somehow do not want to workVideo is compared, apparently just enough to buy a new cable bought it here
This is a new LCD
This is a broken LCD
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

A:Lenovo S210 Touch broken LCD and Touch screen

Hi Magnutus, welcome to the forums.
Please check if you Lenovo S210 is on warranty under with this tool.
After that you can open a ticket with Lenovo for the screen to be fixed, if it is not under warranty it will have a cost.
If you are the guys that like to fix it yourself (and it is not under warranty) I can recommend you to check the support site for your model, read the Hardware Maintenance Manual (on the documents area) and check how the machine is organized on the inside. On the parts lookup page you can find the parts number so you can find a replacements for the component that is giving you issues.
I hope this links helps you.
Relevancy 55.47%

I want to buy this mouse to better work with my laptop.
Can somebody give me some feedback on how this glas pane works instead of a scrollwheel? Handling, etc.

A:Logitech Touch Mouse 400 for a Laptop with no touch screen

Sorry I can't answer your question, but this post piqued my interest. I use the Logitech 620 touch mouse on a Windows 7 box at work. I find a little touchy and has to tweaked. But I haven't tried the 620 on Windows 8. Because I'm always looking for the perfect mouse, I think I might just pick up the 400 tonight and let you know.
Relevancy 55.47%

Hello everyone, my touch screen on my lenovo ideapad z400 touch is not working anymore.  The only weird thing I remember is some ghost touchpoint on my screen. I've been looking for the answer to this issue, but it seems that Lenovo does not address this problem.  If someone has found the solution to this problem and wants to share it with me, I will be forever grateful.  

A:IdeaPad z400 Touch - Touch screen not working

I facing the same situation right now. any solution please. left side of monitor is being "touched"?
Relevancy 55.47%

Hello,I am desperate for help. My laptop will turn on. And I can type in my password. But then when the computer loads it takes a very long time and when it gets to the desktop the keyboard, the mouse, the touchpad, and the touch screen won't work. I can see everything on my desktop. But I cannot open anything or do anything at all. How can I fix this?Thank you!!!
Relevancy 55.47%

The touchscreen stopped working suddenly on my Envy TouchSmart Sleekbook - dx At first i though it was like a normal failure and that will get fixed by turning the pc off or restarting so I did not pay attention to it until now that I screen- not touch touch... HID-compliant to working, use unable had restart my pc multiple times Currently running win I started to believe it was because of an update a few days ago since it was when the problem started but all drivers and everything is up to date I have checked for the HID-compliant Touch Screen driver and had to nbsp show hidden divices in order to find it I cannot enable it and when i check in the properties HID-compliant touch screen- not working, unable to use touch... the following message displays nbsp Currently this hardware device is not connected to the computer Code To fix this problem reconnect this hardware device to the computer nbsp I have no idea on how to connect or how it got disconnected I come from a similar thread but did not solve my problem I have been researching this for hours and have not found and answer Help please nbsp
Relevancy 55.47%

Hey everybody nbsp I just received my P last week as a replacement for another Lenovo device So far everything seems to work fine with one exception nbsp Pen... Touch P40 Yoga: ThinkPad / Touch Lenovo Screen When I turn the screen over to the tablet position the touch screen and the touch pen show erroneous behaviour a As soon as I make the first input with the touch pen I cannot make any further input with my finger so the touch input is simply turned off The Windows setting to ignore touch input when the stylus is used is not active b When I try to tap buttons at certain areas of the screen especially at the upper edge the cursor of the stylus starts jumping around and shows up at the lower edge of the screen That means that when I for example tap on the X symbol in the upper right corner to close a window I actually click on some of the symbols in the system tray in the lower right corner nbsp This problem stops occuring as soon as the angle between the two case parts screen and keyboard reaches exceeds approx It does not matter if Windows is in Tablet or Desktop Mode I already Lenovo ThinkPad P40 Yoga: Touch Screen / Touch Pen... tried to manually install another Wacom driver mentioned at https forums lenovo com t ThinkPad-S-Series-ThinkPad-Yoga Wacom-Tablet-Service-for-ISD-Driver-Win and https forums lenovo com t ThinkPad-P-and-W-Series-Mobile P -Yoga-issues td-p I had no luck trying driver versions and nbsp I would really appreciate your help since this issue makes working in the tablet position virtually impossible nbsp
Relevancy 55.47%

Yesterday I was on my laptop and before I shut it down it went into what looked like a different mode. I booted it up this morning and it is still in this mode. It looks like touch screen mode but I do not have a touch screen.  The icons on the task bar are spaced out and there is a back button on the task bar too which is not normally there. When i right click against the task bar, one of the buttons says "Show touch keyboard button".  All of my files are spead out as if to have room for touching if I had a touch screen but I do not. I am finding this very annoying because I cannot get onto my desktop properly and is not in the right mode. Please help!
Relevancy 54.18%

Hi, Just a quick question, we have one hp touch laptop model # 13-a200nx Pavilion series, and it touch has broken. I wanted to know can we replace its touch with non touch screen ? is there any availability?  Thanks
Relevancy 54.18%

My client told me this was a touch screen, so that is what I ordered.  HP 749970-001 touch screen display assembly.It is installed, but not recognized.  In order to use it as a touch screen, would I have to replace the motherboard too?Is there a driver available?  The display works, it is just not working as a touch screen.

Relevancy 54.18%

I'm on the Driver Download page for the S400 Touch, but I have no idea which driver is for my touch screen.  There are display drivers and mouse/touchpad drivers, but neither of them say anything (at least I don't see it) about the HID touch screen.  Running Windows 7 64bit.  Any ideas?

A:S400 Touch - Driver for Touch Screen

Hi DJwhiteSquall,
Welcome to Lenovo Community!
As per the query we understood that you are looking for the display drivers for your Lenovo S400 touch laptop.
As per the specification of this laptop  has AMD Radeon 7450M Graphics card, however please share the serial number of the laptop through private message as this help us to assist you in better way.
Click here to send the private message.   
Hope this helps. Do post back if issue persists!
Best regards,       

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
Relevancy 54.18%

window 8.1 check pc info Pen and touch : No pen or touch input is available for this display No pen and touch in control panel I'm ready install drivers completed  how do I?

A:My desktop B50-30 Multi touch touch screen not wo...

Hi keerati,
Welcome to Lenovo Community Forums!
Check the Touch funtionality in OKR environment.
    Turn off the computer and Turn it back on and right away start tapping F2.
    Select Recovery. Once in the Recovery screen Test the touchscreen by touching any of the option if it will respond.

If the touchscreen works in OKR Environment, I suggest you perform a One key recovery (expect dataloss).
If the touchscreen still did not work in OKR Environment, I suggest you call Lenovo Technical Team for assistance.
Solid Cruver

Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!
Relevancy 54.18%

Touch screen on our HP Pavilion 23ST Touch All in One PC P2N42AVstopped working after about 6 months. I reimaged and restored it back to original system. To make sure nothing waschanged by any updates that may have been done.I cannot see any options in device manager for the touch screen.Everything else is working just fine but no touch screen functionality. doing F2 and trying component test. Touch screen isn't there.It is like it disappeared.   This id used in a business and it was working 18:00and the next morning nothing.
Relevancy 54.18%

I have a kiosk on which I've just installed 8.1 pro. It has an oem touch screen manufactured by General touch (p/n st6001u). I've installed the driver and it seems to work but Windows still says "no pen or touch available". My customers using the
kiosk will need to type on screen in addition to just clicking. Is there any way to for the OS into touch mode? I believe under 7 there was an option in Windows features but I can't seem to find anything on 8. Google has been no help.
Any ideas?
Relevancy 54.18%

Hi, I've recently formatted my Laptop HP Envy m7-n101dx (touch) and installed Win7  Ultimate (64 bit).  I have downloaded all drivers available on HP website and installed on my laptop.  There is only one unknown device left (acpi\msft010), and I'm unable to to find the correct driver.  My problem is I'm unable to use the touch screen of the laptop, I've googling and found that is there must be a problem with with the Human Interface Device, but when I've checked the Device Manager no Human Interface Device is on the list.  Please could anyone help me out.  Thanks in advance

A:Touch Screen of HP Envy m7-n101dx (touch)

Hello @JeffJadoo, Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your issues, with help from the community! I understand that you are having an issue with the Touch Screen, and wanted to assist you! Did the notebook originally ship with Windows 10?  How did you go about formatting the notebook, and installing Windows 7?  You may be able to use the Recovery Manager to restore the drivers, however, based on how you installed Windows, the Recovery Partition may already be removed.  You can also try reviewing the following document, to see if the information helps: HP Notebook PCs - Touch Screen Issues (Windows 8) Please post back with the results.  It is possible that the Touch Screen may not be supported for Windows 7 on that particular notebook. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!
Relevancy 54.18%

The touch-screen monitors are probably more expensive than your regular LCD Monitor...

A:Will anyone buy a touch-screen monitor just to use the touch feature? a little more expensive. I think I would get one?
Relevancy 52.46%

I bought a Lenovo G50-80 Touch Laptop, but for some reason the touchscreen is disabled and it also says that it doesn't have touchscreen on it.
Relevancy 52.46%

So I have got a Lenovo Y50-70 with 15.6" 3840x2160 UHD Touch Display for about two years now. I've accidentaly dropped my backpack, while the laptop was in it and cracked it's screen so I need to replace it. The screen in the cracked part is working as it was working before the accident, the crack is on the glass. So I was wondering if I can replace my 15.6" 3840x2160 UHD Touch Display with a 15.6" 1920x1080 FHD Non-touch Display? Is it possible?I've read that whether screen you are changing, its working depends on the quantity of pins on the Video signal connector. 

14805592_1377320382293084_1940252874_n.jpg ?54 KB
Relevancy 52.46%

Hi All, some one pls help me.
1.  On my touch screen - left top corner the volume screen shown 0. This is reduced automatically.
2. The touch pad is not working - I am not able to move the cursor but can click where ever it is placed.
3. The keyboard on tablet mode is also not working.
this happened all of the sudden. Is there any virus or some issues with software. Pls help i am really need of a solution here.
Mod's Edit: Additional information added to Subject line for clarity of issue and moved posting to it own thread.
Relevancy 51.6%

I have an acer aspire M3 581T-6405 series ultrabook, but my screen is broken. Can I replace it with a touch screen from an Acer Aspire M5-583P-6428? Whether the touch screen works as a touch screen or not is irrelevant I just want to be able to use my laptop.
Relevancy 49.02%

My machine is occasionally crashing BSOD style and freaking me out. I have it usually says IRQ not equal or less than. I know is if probably a driver issue as I have had some experience with this same error in the past. I would like to post all the info I can here and let you guys mill through it.

The last time it crashed I was away and didn't see the BSOD error code but I got these two out of the event viewer.

Error code 100000c5, parameter1 0000002c, parameter2 00000002, parameter3 00000001, parameter4 8054b16a.

Error code 000000c2, parameter1 00000007, parameter2 00000cd4, parameter3 0000002b, parameter4 89c5c008.

Good lord please someone help me fix this.

Relevancy 48.59%

Ok I have been playing Counter-Strike Source on my computer for almost years no problems Got a new graphics card about months ago had no problems with it I noticed the fan went out on it a while back I just keep an eye on how how it might get from the room temp nuts Screen issue: goes Counter-Strike Source Still no issues Now at times I run CSS the game freaks out walls and people flash pink green it snows pixels and I usually see grids flying by my screen Never have seen this before not even on a card that is overheating It seems to do this for any game in Steam I don t really have any other games on pc I did have WoW Counter-Strike Source issue: Screen goes nuts and installed it again to see it seemed Counter-Strike Source issue: Screen goes nuts to run fine Weird thing is I was trying to test to see if it is just overheating Well I ran CSS for hours today and nothing Turned off my comp re-ran CSS and it started Counter-Strike Source issue: Screen goes nuts to instantly freak out Rebooted and it fixed it Did this over a week span to see if it s constant and it just seems to be random Even had my comp open with a fan blowing it in just to see if anything was different Anyhow screen shot is below with some system info I am just wondering if is a hardware issue or a software if anyone has had previous issues with the GT series or possibly a driver I could get Graphics card GeForce GT mb Computer Pentium cpu GHz with gb RAM OS Windows XP SP http www jtate net host uploads cs office jpg Thanks nbsp
Relevancy 48.16%

Greetz to all The blue screen came up while testing my connection stream under Yahoo Messenger and Skype under voice and video as video wasn't working on HELP THE nuts ... * ISSUE? Blue * * WHAT'S Screen Windows USBUHCI.SYS) (DRIVER_IRQL a site java based and its tech suupport insisted in being an issue with my connection Yahoo and Skype worked fine for up and downstream then Kaboom Details of the blue screen A problem has been detected and windows has been shut down to prevent damage to your computer DRIVER IRQL NOT LESS OR EQUAL If this is the first time you've seen this stop error screen restart your HELP * Blue Screen (DRIVER_IRQL ... USBUHCI.SYS) * Windows nuts * WHAT'S THE ISSUE? computer If this screen appears again follow these steps Check to make sure any new hardware or software is properly installed If this is a new installation ask your hardware or software manufacturer for any windows updates you might need If problems continue disable or remove any newly installed hardware or software Disable BIOS memory options such as caching or shadowing If you need to use safe mode to remove or disable components restart your computer press F to sellect Advanced Startup Options and then select safe mode Technical information STOP x D x x x xF A usbhci sys - Address F A base at F A Datestamp d It was the first time with this puter I got a blue screen that didn't pop for secs only before system restarted by itself This one was frozen on my screen so I reseted puter manually Windows was loading apparently normal but I noticed it was slow on loading the tray icons and then the clock was frozen for mins till it was back working ok and the first icon Avast AV showed up I asked for task manager and only mins after the window and icon showed up on tray CPU usage The process on top was SERVICES EXE which can't be ended After mins waiting and observing the usual processes were loaded but the icons were not there just or the clock on tray froze again to start back after some mins CPU on I asked for a restart under the task manager without getting any response so used the reset button The boot lead to the floppy driver which is not there and disabled on BIOS for months the power was shut down at the source puter was turned back on and selected to start using the last good configuration All the same as before lagging on loading programs nothing on tray clock icon frozen CPU on There wasn't any hardware or software installed recently apart small Windows updates the day before Only USB devices I use are my webcam and my minimodem for G HSDPA connection it's not a phone and only exchanges data As it was the first time I had such issue I thought maybe it was a malware causing Windows to lag like that I booted again and selected SAFE MODE so to try setting a boot-time scan Still same issue as normal mode concerning loading the programs and lagging to show icons plus tray clock as well frozen CPU was again under SERVICES EXE After h or more I realized I couldn't load or run anything on Windows The first thing that occured me was trying to repair Windows using the install CD so there I went not the Repair Console but the feaure to repair the installed system It took about mins till getting on screen CONTINUING INSTALLING WINDOWS and more till getting at the INSTALLING DEVICES procedure After min only the bar is on and then it stops HD led still works for about mins showing some activity then after it blinks every second looking almost dead I booted and repeated over and over the same procedure more times i can count - every time leaving the puter running for - - - - hours on that installing devices combining with few changes done on BIOS as in the mean time I got a laptop borrowed so to search on forums for similar issues At all forums I searched it was a common sense the blue screen message was related to a hardware problem and many found solution by disabling replacing cleaning items as well doing changes on BIOS such as cache puter crawls lik... Read more

A:HELP * Blue Screen (DRIVER_IRQL ... USBUHCI.SYS) * Windows nuts * WHAT'S THE ISSUE?

Hi ZStorm,

Safe Mode works fine? Btw is this a PC desktop?
Relevancy 48.16%

Hello I have a Sony Vaio T-series laptop model SVT CXS running windows As of yesterday the touch TV + OK, SCREEN BLACK to (power OK, fan LAPTOP HDMI OK) screen screen is black it doesn't display anything Laptop powers on lights are on fan makes noise etc I was able to plug an HDMI cable from my laptop to my TV and I am able to use the laptop using my TV screen laptop screen is still black but displays on TV works And the odd twist this is a touch screen laptop so I am able to touch my laptop screen and it makes clicks and moves cursor on my TV for some reason the track pad doesn't work while its on TV LAPTOP BLACK SCREEN (power + fan OK, HDMI to TV OK, touch screen OK) display though Any help would be greatly appreciated If you can give me steps into diagnosing the problem that'd be great I live in a small college town and there is only one computer repair shop and since it's a monopoly he rips people off Charges for a diagnostic if you get it fixed it goes towards the repair if not it's Charged my friend for macbook charger and it wasn't even an genuine Apple product
Relevancy 48.16%


I have a windows 7 touch screen laptop which I am using along with an extended desktop on a secondary monitor. Is there any way I can lock the mouse/pointer onto the secondary monitor but still use the touch screen facility on the laptop itself?

thanks in advance for any help provided.

Relevancy 48.16%

1 have HP 2000 Note Book . It carries regular  Screen . I want to replace it with touch screen.Please let me know it will work or not? thankyou.

A:can you change normal screen to touch screen on hp2000 note...

Hi, What is your HP 2000 ? Please use the following instructions to find out the model/product of your machine:
Relevancy 48.16%

Hey all, I woke up this morning and started using my computer to find that there were white spots on my computer screen that I had not previously noticed. I have had the computer for two years and haven't had any similar issues. There does not appear to be anything wrong with the pixels, as the color changes appropriately - it's just brighter. Furthermore, the bright spots on the screen heat up much more than the rest of the screen, which remains cool. I also noticed that, though this may be a separate issue, the touch screen isn't responding. Here is an image (it's much more noticeable on a white background):   Any help is much appreciated!
Relevancy 47.73%

Dear Sir MyHP Pavilion x360 is now broke the screen but i can still use is as nomal but it can not touch screen . what should I do ,  If our smart phone it break the screen it still can use why my Pavilion X360 can not touch screen ? Please help
Relevancy 47.73%

I've had this Chromebook for under a week, and today out of no where it the screen flickers nonstop.
If im doing something like watching a video, then the entire screen does it. What should i do? I have a warranty.

A:Chromebook 13 with touch screen - flickering/shifting screen

I charged the battery, and once it was 100% it stopped happening. Now my touch screen is on, and i can't turn it off no matter if i use the command or change it in the settings. Im assuming this is a touch screen problem.
Relevancy 47.73%

I have bought this product 3 months ago "HP x360 Convertible 13.3" Touch Screen 2 in 1 Laptop 6th Gen i5-6200U 8GB 1TB" 2 days ago I found its screen was broken, I think it was dropped on the floor inside its contaning bag. It is still function well, but I want to know can I change the screen or not.    Thank you in adavnce 

A:Broken Screen of HP x360 Convertible 13.3" Touch Screen 2 in...

Hi @Mostafashalaby, Welcome to HP Forums! I have read your post and wanted to help. I understand that the screen is broken, and you want to change it. Option 1: You can contact HP phone support to arrange a repair. To contact HP phone support: please use the following link to create a case for your issue, and contact HP. If you live outside the US/Canada, please click the link to get the contact information for your region. Option 2: If you want to replace the screen by yourself: Please let me know if this resolves the issue by marking this post as "Accept as Solution".  To simply say thanks, click the Thumbs up below!    If you require further assistance let me know and I will gladly do all I can to help. Thanks. Regards,
Relevancy 45.15%

Hey   People        I  have  touch screen model 15-g019wm with windows 8.1 cant figure out how to use it  i went to my hardware  i went to my drivers i went on hp manual says i have one cant figure out where can somebody help me
Relevancy 45.15%

Although I?m not using Windows 7 OS yet, what it has to offer & all that I?ve seen, it's pretty impressive. I'm in the process of deciding whether to go with the upgrade W7 or purchase a new Laptop/Notebook? One concern or complain I must state. I understand that Windows 7 comes with touch screen capabilities, but ONLY works with a human touch? Being physically disabled & cannot use my hands at all I type by using a head-pointer with an eraser for a tip. Yes, I?m not going to be dishonest here, I?m using an aftermarket touch screen with Vista, but I?m leery on how (or if) I can still use it with W7? I don?t know how, but I would just love to get in contact with a MS Developer to express my views. Am I correct in assuming that the touch screen option requires a human finger touch?

A:Touch screen in W7?

W7 isn't limited to touchscreens that only respond to finger operation but to touchscreens whose controllers identify them as HID touch devices, a relatively new category. W7, like its predecessors, recognizes HID mouse devices, which most touchscreens have been until recently. Treating a touchscreen as a mouse has never delivered the best user experience, as it precludes right-click-on-hold, calibration, edge acceleration, and many other valuable facilities. Consequently, vendor-specific drivers, which do provide these facilities, have been used. W7 accepts most of these drivers. In the WDM driver stack, these are lower-level drivers. To the OS, the device still appears to be mouse. Therefore, none of the new touchscreen-specific features of W7 will be available.

The reason that you might have heard that only finger operation is supported is that W7 recognizes as touch devices only those that identify themselves as HID-touch. Of these, only the ones that generate touch-specific events allow you to use gestures and multi-touch. The two technologies most likely to support these are capacitive, which requires finger activation, and wire-matrix digitizer, which requires an electronic pen. W7 can still use other touchscreens, including old ones, but the new capabilities will not be available.
Relevancy 45.15%

My touch screen failed to start every time I closed the laptop cover,The only way to get it back was a restart. I fixed it buy going to the intel graphics setup and shut off all the 3D selections. It worked for me its worth a try.
Relevancy 45.15%

I have a netbook and a desktop. When Windows 8 comes out, if I install it on my desktop, would I have to get a different monitor to use the touch screen or will it work with any of the newer monitors?

A:touch screen

If you want touchscreen capability, you will need a touchscreen. But I am sure Win8 will also work with the traditional gear.
Relevancy 45.15%

Hi guys, does the hp 250 g5 CND625210W MacBook have touch Screen?

A:Touch screen

Hi, HP 250 g5 is not a MacBook. It is a series of many HP machines.The following one does not have:!tab=specs And I can't work out what is CND625210W from your question . Regards.
Relevancy 45.15%

Hi all,

I have recently aquired two touchscreen machines. They are the control unit for cash registers. They are both fairly low spec:

Celeron 1.2Ghz
256 ram
30gb HDD

Just like to hear some ideas on what I could do with this with focus on the touch screen.


A:Touch screen pc, what to do??

It would be great to upgrade them and then use them as photo editing computers for cutting and painting on images.
Relevancy 45.15%

Touchscreen isn't working properly. Can't scroll,swipe,enlarge or make smaller. It kinda goes crazy. Open/closes without me touching anything.
Relevancy 45.15%

after windows 10 aniversity update on my acer aspire switch 10, my touch screen is no long working.  Please help.
Relevancy 45.15%

I am using a Lenovo IdeaPad S510p Touch laptop (Running Windows 8, x64 bit), and have recently installed updates after not having updated it for three months.
Now I am having issues with the touch screen. It was working fine before, but now it is not responding to any of my input. The drivers seem to be all up to date, and I've installed all the available updates for my PC.
Does anyone have a solution for my problem? I don't want to have reinstall Windows or anything like that, so please don't suggest it unless I really have to.
Thank you!

A:Touch screen help!

Check if is enabled in control pane, you should have option "Pen and Touch"
Relevancy 45.15%

Hi every body….any body know what is the best Touch screen software (Kiosk Development Software) please let me know ….thank you.

A:Touch screen


don't have that much expereince with these, but have a look at this site:


Relevancy 45.15%

Beginning with a new OS like 8 seems nice and the product wouldnt be the same without touch tech. I havent got ANY touch equip so maybe one of those fold on screens that usb links the existing screen INTO a touch screen can do the trick? Is there any likely hood of some greatness lost?

A:8 screen touch


I have converted my non touch monitor Phillips 220EW8 21.6 Inch monitor into a touch screen using a 3M touch sensor USB. I have another secondary computer at my workplace which is a HP touchsmart, All I can say It's the same experience you get from the both monitors...If you really interested here is a link..chk it out
Relevancy 45.15%

My touch screen failed to start every time I closed the laptop cover,The only way to get it back was a restart. I fixed it buy going to the intel graphics setup and shut off all the 3D selections. It worked for me its worth a try.
Relevancy 45.15%

I have the Inspiron two-in-one and for some reason my touchscreen is no longer working. Does anyone have any suggestions?
Relevancy 45.15%

Altough Im disabling my touch screen friver in the human interface driver, it keep returning over and over again and I can't get rid of it. How can I disable it for ever ?
Relevancy 45.15%

I'm thinking of connecting a 19 inch touch screen to my system to use Media Center and security camera's in my kitchen.

Has anyone got this setup and if so what screen are you using?

A:Which Touch Screen

it all depends on if you want to be able to use the new "multi-touch" features, if you do you will be very limited to the screens you can buy.
Relevancy 45.15%

On my Inspiron 15R 5521 the touch screen stop working
Relevancy 45.15%

Altough Im disabling my touch screen friver in the human interface driver, it keep returning over and over again and I can't get rid of it. How can I disable it for ever ?  Thanks
Relevancy 45.15%

My touch screen stopped working under Windows 8. I tried every step I could find on these forums - disabling the touch screen driver, restarting, updating the driver - with one exception; under Component Tests in my HP Diagnostics UEFI, there is no Touch Screen component listed. It is there under Device Manager etc., but cannot be found in the UEFI. I updated the computer to Windows 10 and the problem remained. I restored the computer to its factory settings and the problem has remained. There is no damage to the computer, which is still quite new, and which works perfectly in every other respect. Previously, the touch screen might stop working and a restart would solve the problem, but it has not worked at all for some time now. Any suggestions?

A:touch screen

Hi there @jtlhughes?,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand you are having an issue with the touch screen. I will be glad to help you. Please post the full product number. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Here is a document for Touch Screen Issues (Windows 8). Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below! Thanks.
Relevancy 45.15%

Looking into using a touch screen monitor. I use Windows 7 Home Premium and I understand that Windows Touch is available on the version.

If I would get the monitor, do I need to find drivers or are they include with Win 7?

Is anyone using a touch screen monitor now?

Looking at Windows 8, I have been playing with the Consumer Preview copy and it looks like a touch screen would be useful with Win 8 if a person would decide to upgrade to that.


A:Touch screen anyone using

Hello Jack, welcome to Sevenforums!

Touchscreen is useful, and fun. It is by no means neccessary, however. Windows has a standard driver, but for a touchscreen, you will want to look up the driver on the monitor's manufacturer's website. There are 2 different drivers - 64 and 32 bit. Make sure you get the right one according to your system.

If I were to use touchscreen, it would be because of application(s) that require it, or are easier to use because of it.
Relevancy 45.15%

R14 touchscreen works at starting and stops after some time. Still works in other windows. Problem resolves after restart and toichscreen stops after sometime.
Relevancy 45.15%

My touch screen on my HP Pavilion 23 all-in-one has stopped working.  I have tried to calibrate it, but can not find the stting
Relevancy 45.15%

I'm planning to buy a new laptop but will never be using the touch screen. Will I lose any functionality in Win10 by just using a mouse and keyboard with a touch-screen laptop? Do touch screen models use a different version of Win10?

BTW, I know I can buy a non-touch screen model and may do that, but we're looking for a large screen and non-touch choices are limited.

A:Not using touch screen

There's no problem with that, any icons or tiles are clickable with mouse, just like everywhere else. For touch screen devices there is "Tablet mode" and can be turned off to behave same as any other desktop/laptop. If device doesn't have touch screen, Tablet mode is disabled by default.

Tablet Mode - Turn On or Off in Windows 10

There's no special version of Windows for such cases except for Windows phones.
Relevancy 44.72%

The touchscreen on my HP Envy All-in-one started to go crazy with phantom touches being detected shooting up and down the right half of the screen nbsp I have to disable the HID-compliant touch screen in device manager in order fault Screen Touch to be able to do any work on it nbsp Initially I simply unplugged every device shut down and nbsp disconnected the power then left for a few minutes and restarted This did not help I downloaded all of the latest updates for windows and then all of the latest graphics and firmware drivers But no change In case it was caused by an update I did a system recovery and returned windows to default but this has not helped either I ran the UEFI System Diagnostics on start up and performed the Touch screen tests - it seems that i was able Touch Screen fault to complete the test on the left side of the screen but the right did Touch Screen fault not respond with frequent phantom touches nbsp I was unable to complete the test nbsp Additionally for some time now the screen flashes on and off especially when it seems to be running hot nbsp This happened regardless of whether 'Problem Reports and Solution Control Panel' nbsp and 'Windows Error Report Service' are disabled nbsp This is the second HP Envy All-in-one I've had in just over months and the first was replaced due to very similiar issues with a faulty screen nbsp It seems like this one's screen has gone now too so it was either a faulty batch or the HP Envy All-in-one has a fundamental fault
Relevancy 44.72%

I have a Dell SX2210T touch screen monitor that worked with my Dell computer and then with a replacement computer running Windows 8 & 8.1. Then along came Windows 10 and my monitor has no touch capability. Even the monitor driver/s have disappeared. Device Manager lists no touchscreen device. I tried to get a driver from the Dell site, but this proved to be a no, no as I just went round in circles and never got a driver.

Does any one know how I can resolve this annoying problem? I don't have any software to reinstall from . OR... do I just forget touch screen ability?

Relevancy 44.72%

hello.i own a refurbished w510 with 1920 touch question is this:is it possible to enable or disable the touch function at will?or is it always on?
Relevancy 44.72%

Hello,the USB ports and touchscreen have stopped working on my laptop. I have run diagnostics which have come back will the following code on the USB test:USB port  -  Failed  -  67PX7S-7RL86X-XD7WL1-8D3003  -  8/10/2016 Could someone please advise me what has failed here? THanks
Relevancy 44.72%

I have an Intel I7 Desktop with a 30in screen.

I wish to run Win8, and have the touch screen capability. Is there, say, a glide pad type touch screen that I can buy to input touch gestures? Maybe 8" or even better, use an app on an iPad?

I need to keep my large screen for a few reasons, one of which is that I am disabled, and my sight is failing, so I am seeking an addon glide pad type solution.


A:Alternate Win 8 Touch Screen

do you mean like a trackpad/touchpad?

like this?

or this?
These are the Lenovo Wireless Windows 8 TouchPad K5923 and the Logitech T650, respectively. They'll give you the standard swipe gestures as well as provide additional gestures. However, the experience is not quite the same as a true touchscreen. They are, at the heart, trackpads that recognize multitouch.
Relevancy 44.72%

We're buying an inexpensive Acer Aspire for the office. The new lower end machines now are preloaded with Win8 vs Win7 (unfortunately).

To upgrade the machine to a touch screen would require an additional $150.

We only use the machine for Word, Excel and Outlook--a touch screen is totally unnecessary.

Is there a way to setup a Win8 machine with a non touch screen to use with a mouse (or similar pointing mechanism) and not negatively affect one's use and performance? Also, is there a way to setup a Win8 desktop so it sort of looks like a Win7 desktop?



A:New machine touch screen?

Classic Start Menu is what I use for gaining a start button/menu. It works quite well, google will find it for you, there are also several others available online.

The computer should function just fine with a mouse as it comes out of the box. I have an All in one unit with touch screen and I seldom use the touch. I go to the metro side now and then and use the touch but it is not something I value very much at all. I can use touch to scroll around and move the cursor but the mouse does fine as well in the desktop.
Relevancy 44.72%

Hi -

Do you know that like a mouse, the touch screen does not process until you release? Check it out. Put your mouse over a link, hold down the left button, move the mouse and release the button. Nothing happens. It's the same for the touch screen.

How can I change this? I want the touch screen to activate when touched rather than removed. I believe this is in the mouse setting since it is acting like a mouse and performing the same job. I have looked all over the Internet and cannot find the answer. By the way, we have a HP Touch Smart computer running XP Home Premium.

Any help is greatly appreciated. I need this to help my daughter who has developmental delays. You can get more information about her at The Grub Club® - About Us.

Relevancy 44.72%

There was an option for touch screen's setting in (Setting > Personolization) "see the picture. But it disappeared after I installed a new operation system, I installed all the drivers, I couldn't get it again, anyone can help to get this option again? Note: My both old and new operation systems were Windows 10 X64
Relevancy 44.72%

 Hi I have hp laptop with following properties: Natural Silver 13.3" pavillion x360 13 s194nr convertible laptop with 6th gen core i5 processor, 6 GB of ram, touchscreen 500 GB hard drive and windows 10. recently my touchscreen digitizer has been broken and I had such a hard time to work with my laptop. I want to replace my broken digitizer by the new one, but unfortunately I couldn't find any web site providing me a link to buy a digitizer, although I searched a lot. I lived in Pakistan and needed it within reasonable time. So, I just wanted to know if there is anyone here knows how to buy a digitizer for Natural Silver 13.3" pavillion x360 13 s194nr convertible laptop?  

A:Where can I buy a touch screen digitizer for hp?

Hi, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community! I have gone through your issue of touchscreen digitizer has been broken. So there are Two option: 1.  If your product is under warranty then contact HP call center and asking for that hardware replacement in HP service center. So hp executive will help you as needed. Also you can call if it's out of warranty and want to fix it. 2. You can purchase online also , as few online sellers are selling that product and fix it on your own. I would recomend the option 1. Hope this will help. Thanks.  ****Click the White Kudos star to say thanks********Please mark Accept As Solution if it solves your problem****

I am an HP Employee.
Relevancy 44.72%

Will a touchscreen monitor to replace my current monitor be all that is required on my system to add that functionality to Windows 8?

A:Windows 8 touch screen

As long as it has windows 8 compatable drivers,yes.
The touchscreen is another input device like a mouse or touchpad.
Relevancy 44.72%

Hello,Recently my computer started having screen problem. Screen doesn't work.  I stop the computer by power button and restating. After I push F11 and re starting like that way it works.But later it deaos again. Everytime I need to press F11 and make the proccess again an again.I am adiding the picture below.Please help.
Relevancy 44.72%

Can you disable the touch screen on the Dell Inspiron 14r easily? Thank you

A:Disable touch screen?

hi it is so sample to disable touch screen in windows 8 

go to my computer,s properties
select device manager
click on human interface devices
there is a touch screen option
right click on the touch screen and click on disable this device
now touch screen is bye bye
Relevancy 44.72%

How do I enable the touch screen on my Probook 430 G3.  It says it has the feature, but I can't find it.  ThanksLu
Relevancy 44.72%

Touch screen is not working. I upgraded. My notebook with windows 10. When problem seen then factory reset.still the problem is as it was..Give some idea

A:Touch screen is not working

Hey @Krishnacisf,Welcome to the HP Support Forums! This is a great place to find solutions and help from our community! I would start by running the HP Support Assistant.The following are some helpful links for troubleshooting the HP Support Assistant or downloading the latest version:HP Support AssistantHP PCs - Using HP Support Assistant (Windows 10, 8, 7)HP PCs - Troubleshooting HP Support Assistant (Windows 10, 8) Also run the Windows Update Tool as it may find, and update any old or missing drivers that you need. Once you've done all that, follow the steps in this document: HP TouchSmart PCs - Troubleshooting Touch Screen Issues Please keep me posted.  You can always say thanks by hitting the Thumbs Up button below!Cheers,TechSurge
Relevancy 44.72%

Hello, I cannot use the touch screen on my Thinkpad Yoga P40 anymore, may that be in laptop mode or tablet mode. I bought this product four months ago. I do not see where this issue could come from, and I could not find any solution online.Any advice on how to make it work again?Thanks in advance. Kind regards, FabienC
Relevancy 44.72%


I understand with the correct specs, drivers, vid card (and monitor?) that Win7 PCs can have touch screen capability.

The HP TouchSmart IQ545a already has that, with Vista.

If I am in the markert for a new PC, and WANT at least the ability to have a WIN7 Upgrade voucher for future use AND want touchscreen capability, what do I specifically look for spec-wise?

In other words, are there any presently available PCS apart from the HP, that CAN have the touchscreen capabilty when on Win7. And is the HP TouchSmart IQ545a upgradable to Win7, anyone know, that would then retain touchscreen capability post-upgrade?

Gee, I hope that was clear!


A:Windows 7 - touch screen

To start i must say touch screen has been around since late xp days. Its just that Win7 is slightly optimized for touch screens.

Then in regards about the upgrade. You can wait about 25-30 days for the PC's running Win7 to hit the shelves(that way you don't have to mess with the install, hoping drivers work, etc.), or you can go buy a Pc that has an upgrade through the pc's manufacturer which can take months to receive back.

Relevancy 44.72%

I noticed my touch screen is not working.  So I took several steps to fix it but to no avail.  The first step was checking to see if drivers were updated but I could identify where the were located in device manager..2nd step was to load hp support assitant and now that is not helpful because it will not open when I click on ? tab
Relevancy 44.72%

Recently updated a Panasonic Tough Book CF-28 from Windows 2000 to XP. The touch screen drivers worked in 2000 but I can't get the touch screen to work in Windows XP. I've tried numerous drivers such as Evio and Fujitsu to no avail. The screen is a Fujitsu but none of the available drivers work. Anyone have any ideas how to get the touch screen back? Thanks in advance!!

A:ToughBook CF-28 Touch Screen

install winxp tablet edition
Relevancy 44.72%

Hello i writing because my screen is blinking all the time after sleep mode until i restrat it. I have update BIOS, and video drivers but still sometimes it starts blinking any solutions?
Relevancy 44.72%

Hi, I have Digital Dining Touch Screen and I can not get a screen to hold its calibration. I have repeatedly calibrated it and it still won't hold. Anyone know how to fix this?Thanks, Winestew

A:touch screen calibration

Make and model of PC? OS?

Welcome to TSG forums.

Relevancy 44.72%

Hi all

i have an elo touch screen i have it working like a mouse which is great, but i would like the flick function in MC.
windows 7 does not say i have a touch screen or pen input connected when i go to the system information screen.

but windows 7 sees the monitor here

is there any way of getting windows to recognise it.

Thanks Tom.

A:elo touch screen is not recognised.

The touchscreen controller (chip inside the touchscreen) tells the OS that it is a HID mouse device rather than a HID touch device, which is a relatively new HID device category. If the Elo-specific driver (XP/Vista/7) is installed, the OS USB-HID driver will give it control of the touchscreen and it does not support gestures or multi-touch. Otherwise, the generic USB-HID driver will treat the touchscreen as a mouse, which also doesn't support these features. I once wrote an Elo-specific driver for the Tablet PC OS where the driver tricked the OS into treating it as a touch device (Tablet PC was the first OS with native support for touch) but I don't know whether W7 would allow this. In, any case, it would be available only through Elo.
Relevancy 44.72%

Hi, I have kiosks that uses win2000 and eTurbo Touch software to drive the screen.

Just last week one of them stopped loadind eTouch when the machine starts up. I have to start the application manually which is rather tiresome without a mouse !

I've checked the start up folders on the other machines and they are the same.

Any ideas?
Relevancy 44.72%

I recieved my T460s just 3 days ago. What I'm going to say next can sound craze but it happened really.
When I started using the laptop the touch screen was working and when I installed the system update it is not functioning any more. The below are my laptop details:
Model: Lenovo T460s
Product: 20F9CTO1WW
Serial: **********
BIOS: N1CET43W (1.11 )
Mod's Edit: Serial number removed from public view to protect owner from its unwanted use.
Can anyone confirm to me if my laptop had been confirgured with a touching screen or not?
Relevancy 44.72%

I bought a pavilion 23 like 2 year ago, it came with windows 8, it works perfect until the windows 10 update. i update my computer to windows 10 and the touch screen did not work, i call several times (a lot of times) to the hp call center and they told me to reverse de window 10 update because there were no driver to work with windows 10. I sent Email to suports assitant with no anwers then my coputer warranty ends i try instaling every update, but still not working. if someone could help me with this problem i would be appreciated. i would not go back to windows 8 because i do not see this as a solution to this  Greatings from colombia 

A:Touch Screen not working

Hi @SilfredoAG, I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Relevancy 44.72%

Since updating my DELL Inspiron R from Windows to Windows the Touch Screen has stopped working nbsp Selecting Device Manager gt Human Interface Devices reveals that the icons which can only be seen by using View gt Show hidden devices for HID-compliant are greyed out - nbsp device touch screen defined device nbsp x as well as the icon for nbsp USB Input Device nbsp Right clicking on all icons and selecting Properties gt General shows nbsp Currently this hardware is not connected to the computer Code nbsp nbsp When I select Properties gt Events all reveal the same message - nbsp Device not migrated nbsp The timestamp corresponds to when I updated to Windows nbsp Can anyone please tell me how I fix this problem nbsp Update Driver Software reveals that all have the latest up-to-date drivers nbsp I cannot Roll Back Driver as this option is greyed out nbsp Scan for hardware changes doesn t do anything nbsp I tried quot uninstall quot after advice from Microsoft but that did not auto re-install the drivers as they claimed it would nbsp It simply uninstalled the drivers nbsp I restored the laptop back to Drivers Screen Touch the previous condition and tried the DELL diagnostics Touch Screen Drivers nbsp That program stopped half way through and told me the drivers were either not installed or not working properly Duh I already know this as they have not migrated correctly Any help greatly appreciated orvdj

A:Touch Screen Drivers

I am having the same problem. Did u find a solution?
Relevancy 44.72%

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 830 Processor, AMD64 Family 16 Model 4 Stepping 3
Processor Count: 4
RAM: 7927 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 941810 MB, Free - 888765 MB; D: Total - 11955 MB, Free - 1469 MB; J: Total - 953866 MB, Free - 953746 MB;
Motherboard: FOXCONN, 2A92
Antivirus: Norton Internet Security, Updated and Enabled

Will this PC run Windows 8?

Is there a monitor or some kind of Touch Screen conversion to work on this PC?

Could I dual boot 7 with 8 in a partition after the recovery patition and keep it on there?

Relevancy 44.72%

I don't want to use the touch screen. How do I switch it off? It gets activated by all sorts of things, such as my pet cat's tail  touching it, or an insect landing on it, or a curtain blowing against it. I don't type using the screen, i prefer the keyboard as I can't type fast on the screen. I'd like to disable the screen touch when i'm not using it (most of the time), or even permanently - it is not useful for what i want to do as the screen is not as sensitive or fast as the input devices i typically use.

View Solution.

A:How do I switch it off the touch screen?

Hi, I have an HP TouchSmart 320-1030, so this may work on your touch screen: Press the Windows logo key + X.Select Device Manager from the list.Click the little arrow next to Human Interface Devices to expand the list.Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).Right-click, and select Disable from the list.Click Yes on the dialog box that asks if you are sure you want to disable the touch screen driver. When you want your touch screen to work again, follow the process above, EXCEPT when right-clicking the touch screen driver, select Enable.
Relevancy 44.72%

My screen on my HP Pavilion 15-p037cl Notebook PC was recently cracked. The screen is a touch scream and that no longer works now. There are no black spots that appear on the screen when the laptop is on. There are only cracked sceen lines that run throught the top of the screen. The frame of the laptop is not damaged and all the functions of the laptop are working excluding the touch screen. How much would it cost to send in the laptop and have the screen fixed?
Relevancy 44.72%

I've used win 8.1 before and touch screen is woking normally, when i upgrade to win10 and install all  driver but touch screen is not working.
Please help me.
Relevancy 44.72%

Hi, My HP pavilion touch screen was works perfectly few weeks ago, how ever once it got stuck and started giving repeated noices and stopped working. I have tried to follow the steps as given on HP online forum to rectify issue, downloaded the software app as said so, nothing as positive yet. Bit of hassel now. Can some one help me pls to get this toch screen on & running again. Thankx
Relevancy 44.72%

After having issues with my laptop, diagnostics showed that I needed to replace my HDD. It was replaced with an SSD, and windows 10 was reinstalled (as that was the OS before replacement). Now the laptop shows that there is "no pen or touch input" in the control panel and the Human Interfacing for touch screen is missing. Both Windows Update and HPSA have been no help in finding the driver for it or in giving any useful information. I just don't really want to have paid extra for touch that doesn't work....

A:no touch screen after SDD replacement

Hi, If thats the case then your best bet is to update the drivers using hp support site. I am going to include pictures so you could follow the steps properly. Go to then type the product number to the search bar  Click Software and Drivers  Then Click Go  Select the current version of windows you are using  Then look for the drivers you seek that you believe missing.  Good luck!

"Education costs money; so does Ignorance"If my post has helped you, click the Kudos Thumbs up!If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Relevancy 44.72%

I have a HP laptop 15b 129 wm touch screen with windows 8.1I put in some new memory and now I don?t have a touch screen I tried the delete in the device manager/ Human Interface Devices then restart but no touch screen driver came back I have looked In the Control Panel under System it says "No Pen or Touch input is available for this display." and in the UEFI hardware diagnostic test and no touch screen is there. The HP wed site has no driver for this modelDoes anyone no wear to get this driver?Any help will be greatly appreciated.  Thanks Bob