Windows Support Forum

Multiple BSOD Errors. Mostly related to ntoskrnl.exe error

Q: Multiple BSOD Errors. Mostly related to ntoskrnl.exe error

I have Daily and sometimes even more often BSOD errors I always seem to get different types of errors I get the BSOD sometimes when trying to wake up my computer it will not come out of sleep mode and then the BSOD appears Most other times my computer will just freeze and the BSOD will appear typically when the web-browser is up Here is my log of all errors ntoskrnl.exe BSOD related error to Multiple Mostly Errors. I have recorded - - dmp PM KMODE EXCEPTION NOT HANDLED x e ffffffff c fffff c c ffffffff ffffffff ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x Multiple BSOD Errors. Mostly related to ntoskrnl.exe error ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM KMODE EXCEPTION NOT HANDLED x e ffffffff c fffff cab a ffffffff ffffffff FLTMGR SYS FLTMGR SYS ae Microsoft Filesystem Filter Manager Microsoft Windows Operating System Microsoft Corporation th release - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM x ffffe f b c fffff d dxgkrnl sys dxgkrnl sys eac DirectX Graphics Kernel Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM x ffffe d b f f ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff cc a ffffd d ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff e a ffffd fb c ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff c a ffffd d b d ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff fe a ffffd f ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM THREAD EXCEPTION NOT HANDLED x e ffffffff c fffff a d ffffd f c ffffd efee ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM THREAD EXCEPTION NOT HANDLED x e ffffffff c fffff cda ffffd eaa c ffffd eaa ee ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff c ffe ffffd e bc ntoskrnl exe ntoskrnl exe a NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe a C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff cfe b ffffd f a ntoskrnl exe ntoskrnl exe a NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe a C WINDOWS Minidump - - dmp PM - - dmp AM x ffffe d d b f f ntoskrnl exe ntoskrnl exe a NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe a C WINDOWS Minidump - - dmp AM - - dmp PM SYSTEM THREAD EXCEPTION NOT HANDLED x e ffffffff c fffff fc ffffd a ffffd a e ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM x ffffe f c f b f f ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp AM - - dmp PM x ffffe fea b f f ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM THREAD EXCEPTION NOT HANDLED x e ffffffff c fffff f d fe ffffd a fbe b ffffd a fbddd dxgkrnl sys dxgkrnl sys fd DirectX Graphics Kernel Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe fe C WINDOWS Minidump - - dmp PM - - dmp PM x ffffe ed fffff b d dxgkrnl sys dxgkrnl sys bbc DirectX Graphics Kernel Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff b b ffffd aa ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff d b ffffd eb a x C WINDOWS Minidump - - dmp PM - - dmp PM x ffffe e b f f ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp AM - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff b cbb ffffd afbf ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp AM SYSTEM SERVICE EXCEPTION x b c fffff c a ffffd e bd ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM SYSTEM SERVICE EXCEPTION x b c fffff dced a ffffd bd d ntoskrnl exe ntoskrnl exe NT Kernel amp System Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp PM x ffffe f f c fffff b c d BOOTVID dll BOOTVID dll ff c VGA Boot Driver Microsoft Windows Operating System Microsoft Corporation th release - x ntoskrnl exe C WINDOWS Minidump - - dmp PM - - dmp AM x ffffe b c c fffff d d dxgkrnl sys dxgkrnl sys c DirectX Graphics Kernel Microsoft Windows Operating System Microsoft Corporation th release sec - x ntoskrnl exe C WINDOWS Minidump - - dmp PM

http://www.bleepingcomputer.com/forums/t/621544/multiple-bsod-errors-mostly-related-to-ntoskrnlexe-error/
Relevancy 100%
Preferred Solution: Multiple BSOD Errors. Mostly related to ntoskrnl.exe error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 81.53%

Hi,

I have recently been experiencing BSOD several times in the space of an hour, and am unsure of the cause. Blue Screen view has indicated that all the BSODs are related to ntoskrnl.exe.

I have included the recommended files according to the BSOD thread instructions.

Any help would be greatly appreciated, as other posts have seem to identify unrelated software as a potential reason. Also, I have seen posts linking to a microsoft hotfix, however I am little wary of using the hotfix.

It may also be worth noting that I have recently been using a replacement power cable that is under-spec (19V at 3.5A, when the original was delivered 20V at 4.5A). I am not sure whether this is the cause as the problem does not occur when running games or in safe mode.

If you require any more information, please do not hesitate to ask.
Thank you in advance.

A:BSOD. Multiple errors all related to ntoskrnl.exe

Hello, Welcome to SF!


Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Missing Windows 7 Service Pack 1
Please install SP1. It fixed a lot of possible errors in Windows. Download Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) from Official Microsoft Download Center


Code:
sptd.sys Sun Oct 11 15:55:14 2009 (4AD24632)
This driver belongs to Daemon Tools which is a very well known causer of BSODs. Please uninstall using this uninstaller: DuplexSecure - Downloads


Code:
Security Processor Loader Driver ROOT\LEGACY_SPLDR\0000 This device is not present, is not working properly, or does not have all its drivers installed.
This means that your anti-virus could possibly be installed incorrectly, or it is corrupt. Please uninstall the one you are using now, and download Download Microsoft Security Essentials from Official Microsoft Download Center for testing purposes.


Code:
BIOS Release Date 10/22/2009
BIOS is also out of date, I suggest updating it by going to the manufactures website.

Please do this for now, and post back results.

-Justin

http://www.sevenforums.com/bsod-help-support/349175-bsod-multiple-errors-all-related-ntoskrnl-exe.html
Relevancy 80.6%

Good day,

I've been using my Dell XPS 8700 for some time now and ever since I've gotten it it randomy blue screens with multiple different errors, as the title implies. When I open up BlueScreenView, the errors seem to be commonly related to ntoskrnl.exe. This happened both in Windows 8 as well as when I updated to Windows 10. If it helps, I've already done a system reset in the past, and the issue remained.

Thank you for any assistance you might be able to provide.

A:Multiple different BSOD errors commonly related to ntoskrnl.exe

Different error codes, 1 of those I have analysed shows network drivers, other don't show much.
This could be a difficult and time consuming troubleshooting process to find the culprit(s).

Please start with disconnecting all peripherals you don't need all the time, thus keep only the mouse and keyboard connected.

Please make sure to (re)install all drivers and BIOS updates available at
Product Support | Dell US

Please uninstall SlimCleaner, the software from Slimware could cause more harm than good.

Please disable fast startup just in case it gives any problem
Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums

Please uninstall any software you don't need to minimalize the possibility that it is interfering with something.

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

http://www.tenforums.com/bsod-crashes-debugging/39914-multiple-different-bsod-errors-commonly-related-ntoskrnl-exe.html
Relevancy 92.45%

OS Windows Professional -bit It is the retail copy from MSDNAA The install iso included service pack and as soon errors related ntoskrnl.exe BSOD, as I installed the OS days ago I used windows update to get all BSOD, ntoskrnl.exe related errors the latest updates my cpu is the AMD Phenom black edition w mobo ASUS M A D All BSOD, ntoskrnl.exe related errors of my hardware has been working great for over a year with windows bit professional running off a k GB hard drive I reinstalled the OS onto a brand new ssd The SSD is a Plextor GB drive that I bought because it had perfect reviews on newegg and other than the BSODs right now it is amazing It appears that almost every time the comp crashed it was running youtube or netflix but one time it was just after booting up A video glitched and a error popped up stating an nvidia driver problem so I rolled it back and have not had that nvidia problem again Again the only new hardware is the ssd model PX- M S Newegg com - Plextor PX-M Series PX- M S quot GB SATA III Internal Solid State Drive SSD After the the BSOD, ntoskrnl.exe related errors installation I opened the bios and set the ram back from to And I read that it is important to run ssd in ACHI mode so I switched the bios setting from IDE to ACHI and it would not boot so I put it back to IDE I followed these instructions to get to system to run in ACHI Exit all Windows-based programs Click Start type regedit in the Start Search box and then press ENTER If you receive the User Account Control dialog box click Continue Locate and then click the following registry subkey HKEY LOCAL MACHINE System CurrentControlSet Services Msahci In the right pane right-click Start in the Name column and then click Modify In the Value data box type and then click OK original value was On the File menu click Exit to close Registry Editor Then set bios back to ACHI and it worked perfectly and windows starts up even faster seconds after bios screen ends where in IDE it took Other than that info I run Malwarebytes Anti-Malware and AVG free edtion and they have worked great for years I tried using amd overdrive to test it previously I got my cpu up to Ghz with just using overdrive's auto feature for the multiplier only I ran the newer overdrive it it only went to from with some research I found that the latest overdrive is not working so I set it back to and everything should be working perfectly Just some info I have quot heat-sinks on each ram stick and an antec case with a huge CPU heat-sink so over heating of the ram or CPU is definitely not the BSOD problem My computer passed mem test and system health report All of the error reports involve ntoskrnl exe but they are not the same The bug string for the last errors are using bluescreenview PAGE FAULT IN NONPAGED AREA KMODE EXCEPTION NOT HANDLED IRQL NOT LESS OR EQUAL DRIVER IRQL NOT LESS OR EQUAL UNEXPECTED KERNEL MODE TRAP Any help would be amazing This is frustrating my computer works perfectly until it's random crash every - hours UPDATE After using Chrome and IE for a few hours withing seconds after starting netflix within Chrome my machine had another BSOD After restarting and running netflix imediately it BSOD again so this info is probably important

A:BSOD, ntoskrnl.exe related errors

Sorry no one got back to you it's only luck I saw your post, as you have probably already figured the problem is the nvidia driver kernel crashing.

Generally the first step in troubleshooting that kind of problem is a complete removal of the driver using driver sweeper
Phyxion.net - Driver Sweeper (this can be done in Safe Mode just for extra measure)
Followed by a freshly downloaded installation of the latest nvidia driver package for your card
NVIDIA DRIVERS 280.26 WHQL

As for your new SSD I would check with the manufacturer for firmware updates for the drive.
It seems to be working properly though.

http://www.sevenforums.com/bsod-help-support/188318-bsod-ntoskrnl-exe-related-errors.html
Relevancy 90.73%

Please help! I feel in over my head for once.

I believe all of my drivers are current. I've reset BIOS to recommended settings. I ran one pass on memtest with no errors. I've run virus scans.

I'm not sure if it's related, but I think I may have had/have a memory leak related to svchost.exe LOCAL SERVICE EventSystem COM + Event System. The other day this Process was using 4GB of RAM, and now I'm getting all these BSODs. I could be wrong on which svchost it was.

DM Log output, BlueScreenView grid, and zip of minidump files attached.

Thanks.

A:Multiple BSOD related to ntoskrnl.exe+75bc0

Here's a link to my SkyDrive folder with lots of logs and file outputs related to this.
https://onedrive.live.com/redir?resi...85159E60%21142

http://www.sevenforums.com/bsod-help-support/333381-multiple-bsod-related-ntoskrnl-exe-75bc0.html
Relevancy 90.3%

1 Month Old Samsung Series 3 Notebook
Windows Home Premium x64 OEM
See CPUID screen shots for details.

Had no problems for the first 3 weeks and then all of a sudden mega BSOD issues. I'm getting errors just surfing the net with computer under minimum load. It was great the first few weeks, now it is unusable. The only possible change I remember performing prior to the errors was installing OpenVPN and then uninstalling it as I was unable to get it to work with uTorrent but this may be unrelated. I have tried troubleshooting by doing the following to no avail:

1. Restore Windows to prior place.
2. Reinstalled Windows
3. Ran memtestx86
4. Ran all tests on Seatools for Hardrive errors.

Any advice would be much appreciated,

Also, thank you very much in advance, you guys rock!

A:BSOD, various ntoskrnl.exe errors possible OpenVPN related issue

Also ran scandisk, SHC test, unistalled alcohol 120% etc

http://www.sevenforums.com/bsod-help-support/238744-bsod-various-ntoskrnl-exe-errors-possible-openvpn-related-issue.html
Relevancy 86.43%

Since I've installed my new graphics card I get allot more blue screens.
I attached the file with all my minidump files. Made with SF_Diagnostic Tool.
If someone could help me out I would greatly appreciate it.

If you need to know more about my system, I will try to reply to messages as soon as possible.

A:Multiple BSOD causes, mostly ntoskrnl.exe errors.

Multiple errors, but none of them are pointing to GPU directly.

Code:
BugCheck A, {10, 2, 0, fffff800034ac103}

Probably caused by : memory_corruption ( nt!MiReplenishPageSlist+73 )

Followup: MachineOwner
-------------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff80003485ebe, fffff8800b47b7f0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KeWaitForMultipleObjects+3e )

Followup: MachineOwner
--------------------------------------------------------------------------
BugCheck 1E, {0, 0, 0, 0}

Probably caused by : hardware ( USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+2e8 )

Followup: MachineOwner
--------------------------------------------------------------------------
BugCheck D1, {fffffa7f929efd8c, 2, 0, fffff88004355fd0}

Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_DecIoRequestCount+14 )

Followup: MachineOwner
---------
So the most consistent error is USBPORT .... and some additional info about it are:

DEVICEPNP DEVICE ID ERROR CODEUniversal Serial Bus (USB) Controller PCI\VEN_1B6F&DEV_7023&SUBSYS_50071458&REV_01\4&3694E160&0&00A9 The drivers for this device are not installed.Universal Serial Bus (USB) Controller PCI\VEN_1B6F&DEV_7023&SUBSYS_50071458&REV_01\4&C70CB9A&0&0048 The drivers for this device are not installed.
The best to do is a clean reinstall. But before doing that, make it sure that the hardware are working properly.

Test your RAM modules for possible errors; as the BSOD points to memory corruption, too.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark; as you have doubt.
Video Card - Stress Test with Furmark

Then, go for a Clean Reinstall - Factory OEM Windows 7, which works equally good for retail, too.

http://www.sevenforums.com/bsod-help-support/313311-multiple-bsod-causes-mostly-ntoskrnl-exe-errors.html
Relevancy 86.43%

Hey guys first time posting from ntoskrnl.exe, errors multiple BSOD here but I found a lot of good information in my BSOD research so figured I should go ahead and make a thread Computer is a few years old a home build running Windows Home Premium x Haven't really had too many problems other than the occasional BSOD or random restart but it's gotten a lot worse lately so I wanna get to the bottom of BSOD from ntoskrnl.exe, multiple errors it The two errors I've gotten are Memory Management and System Service Exception both seem to be linked to the ntoskrnl exe file I also ran the System File Checker and got the following error reported quot Cannot repair member file l quot kerberos dll quot of Microsoft-Windows-Security-Kerberos quot BSOD from ntoskrnl.exe, multiple errors Lastly I ran the windows memory diagnostic and it detected several hardware errors My conclusion from all this and what I've read so far is I will probably have to do at least one of three things A system restore to a couple weeks ago Repair the system OS with my Win disc Replace the RAM Wanted to post here before I try any of those though Whew ok sorry to be long winded but wanted to provide as much info as possible

A:BSOD from ntoskrnl.exe, multiple errors

Quote:
Lastly I ran the windows memory diagnostic and it detected several hardware errors.


This explains your issue, to further confirm that run a full RAM Test with Memtest86+
RAM - Test with Memtest86+

If errors are detected you should replace your RAM modules.

http://www.sevenforums.com/bsod-help-support/218107-bsod-ntoskrnl-exe-multiple-errors.html
Relevancy 85.57%

Hi Eightforums,

I have been experiencing a few BSOD's yesterday, but most of them today. I have attached the a report from the SF Diagnostic tool. From a bit of research I found out that is could be most likely be a Windows (core file?) or a driver error. As the title suggests I got 3 different errors and they are PAGE_FAULT_IN_NONPAGED_AREA (the one I get most often), ATTEMPTED_WRITE_TO_READONLY_MEMORY and this BAD_POOL_HEADER.
Hopefully that is enough for you to find the error.

Sebie

A:Multiple BSOD errors, same cause - ntoskrnl.exe+1850e7

Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions Please use Option 1 as it provides Event Viewer logs.

If you didn't run the "Grab All", then please do so. If you did run the "Grab All" then the report generator was terminated too early. Please let the app run for at least 15 minutes (or until the app itself says that it's done).

Most of the memory dumps blame ELTIMA Software's Hide My Folders ActiveX driver (HMFAxCore5decdc700443adec5f3e84408e3098ff.sys )Please uninstall this program and see if that stops the BSOD's
Analysis:
The following is for informational purposes only.

Code:
**************************Tue Sep 16 19:39:51.844 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-69671-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:13:05.611
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck BE, {ffffc00072ba7000, 80000001d401b121, ffffd00037a464f0, b}
BugCheck Info: ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
Arguments:
Arg1: ffffc00072ba7000, Virtual address for the attempted write.
Arg2: 80000001d401b121, PTE contents.
Arg3: ffffd00037a464f0, (reserved)
Arg4: 000000000000000b, (reserved)
BUGCHECK_STR: 0xBE
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xBE_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Sep 16 19:25:09.050 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-58562-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:27:09.818
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck 50, {ffffc000c93a8000, 1, fffff8002d687162, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments:
Arg1: ffffc000c93a8000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8002d687162, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: AV_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
??????????????????????????????????????????????????????????????????????????????????????``
**************************Tue Sep 16 18:56:51.443 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-86937-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 17:33:... Read more

http://www.eightforums.com/bsod-crashes-debugging/53910-multiple-bsod-errors-same-cause-ntoskrnl-exe-1850e7.html
Relevancy 84.28%

My computer recently started giving me BSOD's with increasing frequency. Most of them indicate that the NTOSKRNL.exe is the driver leading to the fault, which I have read means it is something else as this is maintained by microsoft, and most likely not the real problem.

After some faults, my computer will stop detecting one of my ram slots (I have no idea which one). Currently running 2x8GB sticks. I tried running the computer with each of the RAM chips in each slot (1:1,1:2,2:1,2:2) and got BSOD's with each.

I then switched to some old ram which I never had trouble with (2x2GB dell ram). Got another BSOD, no longer reading one of the ram slots.

Ran memtest 10 times without errors...

Help is appreciated!

A:Multiple Errors BSOD, NTOSKRNL.exe, possible memory involvment

Please follow - Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/294629-multiple-errors-bsod-ntoskrnl-exe-possible-memory-involvment.html
Relevancy 82.56%

I am working on a laptop that has been getting random BSOD usually while nothing special is running. I have run memory checks, several antivirus scans to remove a lot of malware and trojans. Finally at my wits end with this. I would very much appreciate it if someone could point me in the right direction as to what is causing it.

Acer Aspire 7750-6669
Intel Core I3-2350M
6GB memory
1TB

Thanks in advance
Whyastarin

A:Random BSOD multiple errors ntoskrnl.exe+75bc0 bug check 0x00000101

Hello whyastarin .

Please remove IRST:

Code:
lmvm iaStor
Browse full module list
start end module name
fffff880`0109b000 fffff880`011ef000 iaStor T (no symbols)
Loaded symbol image file: iaStor.sys
Image path: \SystemRoot\system32\drivers\iaStor.sys
Image name: iaStor.sys
Browse all global symbols functions data
Timestamp: Thu Jan 13 03:50:12 2011
Driver Reference Table - iaStor.sys







  
Quote: Originally Posted by Arc


Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features.
Then Uninstall the driver from device manager.

Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.


Remove AVAST:
Remove Avast Anti-Virus following this article - avast! Uninstall Utility | Download aswClear
Install Microsoft Security Essentials as an alternative.


Missing SAS (SuperAntiSpyware) files:

Code:
SASDIFSV ROOT\LEGACY_SASDIFSV\0000 This device is not present, is not working properly, or does not have all its drivers installed.
SASKUTIL ROOT\LEGACY_SASKUTIL\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Please reinstall.
Cleanup your startup:
Troubleshoot Application Conflicts by Performing a Clean Startup

Are you using Norton Online Backup?, if not please remove!

Code:
Start Menu\Programs\Norton Online Backup

Keep us posted .

http://www.sevenforums.com/bsod-help-support/312481-random-bsod-multiple-errors-ntoskrnl-exe-75bc0-bug-check-0x00000101.html
Relevancy 81.7%

Hello I m new to my office since I started working here I m getting this constants BSODs but checking the windows logs it seems like it started happening long ago A week ago I unnistalled several drivers and software including avastt and daemon tools and it stopped crashing but it was almost imposible to boot it kept getting bsod after the windows logo screen but I had no problem when booting in safe mode Sometimes it ll just boot normally and wont crash anytime and next day it won t boot sarc I d tried cleaning the registry using CCLEANER SmartPCFixer updated drivers with Driver Booster and manually run Spyware Terminator ETC Nothing worked I keep getting the quot Stop error code x A 0x0000000A DSOD errors Multiple error ntoskrnl.exe various + + code Stop IRQL NOT Multiple DSOD ntoskrnl.exe + various errors + Stop error code 0x0000000A LESS OR EQUAL quot BS And It s impossible to run a memcheck or reinstall the SO since it s the only PC available but I ll try to clean the RAM slots when I can - Dump files and screen shots - Sorry about my english nbsp

A:Multiple DSOD ntoskrnl.exe + various errors + Stop error code 0x0000000A

When you can, check the hard drive by going to Computer, and right-click on the C drive. Select properties, tools, check now. Put a check mark in both boxes to set a disk check on the next start up. Use Memtest86 version 5.01:
http://www.memtest.org/
Run it when you can for at least 7 passes. Any errors mean trouble
 

http://www.techspot.com/community/topics/multiple-dsod-ntoskrnl-exe-various-errors-stop-error-code-0x0000000a.212017/
Relevancy 77.4%

Okay So - my computer's bsod'd twice in the last few days.

I have a few theories as of why. But - as i'm not exactly an expert at these things i could use a bit of advice.

I'm guessing it's caused by hamachi or zonealarm, i just removed zonealarm since it's basically useless for me anyways - and more of an irritation then it is helpful. I'm not sure if hamachi's causing errors as well - but if it is i would like to fix it, as i do use it to network on occasion to game with.

Attachment 202590

Attachment 202591

Help is welcome...
~Lorena.

A:Error 7F BSOD possibly related to network errors?

In the syslog I do see plenty of errors coming from the LogMeIn services, as well as some from ZoneAlarm. You may need to uninstall and reinstall (using the latest versions) of these two as it looks like they have broken installations.

As for the two crashes, they both caught your nvidia drivers doing something funky, but I have my suspicion that it is not the culprit. It is a pretty new driver (Feb 09, 2012) so it's pretty fresh (look for any updates just to be sure it wasn't a bug that's specific to this version). Plus given the type of crash that it was, I don't trust the analysis.

If uninstalling/reinstalling ZA and Hamachi didn't seem to do the trick, you'll want to turn on Driver Verifier to see if it catches anything foul. In the article it says don't check Low Resource Simulation, don't also check Force Pending I/O Requests and IRP Logging, otherwise it'll throw us off. Submit any new crashdumps that may occur from turning on Driver Verifier (remember to restart your PC immediately after finishing setup!).

http://www.sevenforums.com/bsod-help-support/219092-error-7f-bsod-possibly-related-network-errors.html
Relevancy 76.54%

I recently upgrade my computer from Windows 7 Pro 32 bit to Windows 7 Pro 64 bit; so I'm pretty sure my issues are somewhat driver based.

Most of the time the BSOD's happen randomly; though some of the times are when launching games.

I'm a novice at understanding/interpreting the dump files so help is greatly appreciated.

The dmp files are attached! If you need any more info, let me know.

Thanks in advance!

Edit: Ran Windows in SafeMode for about an hour or two. Ran fine without any crashes.

A:Random BSOD, multiple error codes, error ntoskrnl.exe

Still having this problem. I uninstalled adn reinstalled all my drivers. I ran chkdsk (There was a few corruption, but they've been fixed). I ran Seatools - all tests passed. I have no idea what else to try. Any suggestions?

http://www.sevenforums.com/bsod-help-support/378718-random-bsod-multiple-error-codes-error-ntoskrnl-exe.html
Relevancy 76.11%

Hi guys I've had my computer for around years now and I have always had this bug that I have been unable to resolve In the past I had no idea what to do is multiple games, codes, during memory error related? BSOD the computer would just freeze up and not go to blue screen However since upgrading to Windows it has been giving me a blue screen and error message that gave me the idea to start searching for what could be wrong I am positive the errors over the years have all been by the same as what causes them and what occurs after is always the same After booting up if I decide to play a game practically any that require -d graphics the game will start to slow down and the audio will start to crackle Then the computer will freeze up When I ran Windows Vista it just stayed frozen but now during Windows it goes to blue screen and shuts off After rebooting everything runs perfectible normally and I can run any game BSOD during games, multiple error codes, memory related? perfectly without slowdown or freezing Then after shutting BSOD during games, multiple error codes, memory related? down and rebooting another day the same problem will arise It's not necessarily the worst error but I don't quite like leaving my computer in sleep mode as it still drains some power From what I gathered for Blue Screen View it seems to be a memory issue The first error code I received when using Windows was PFN list corrupt That prompted me to test and reseat the ram Windows Memory Diagnostic came out clean but the error persists The latest time I have had this problem the error was Memory Management x a I have updated the BIOS to latest version and have overclocked my RAM however the problem existed before O C Sorry if the format of the post is off first time here Thanks in advance for your assistance

A:BSOD during games, multiple error codes, memory related?

As this has occurred over a number of different OS installs, I'd have to suspect hardware. Please run these free hardware diagnostics: Hardware Diagnostics

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized.

Your BIOS dates from 2011. This may mean that the system may not be able to handle Win8/8.1 (but that remains to be seen). We'll continue to troubleshoot this, but there may come a point where you decide that it's just not worth it and will have to revert to Win7.

You have a TP-LINK 150Mbps Wireless Lite N Adapter





I do not recommend using wireless USB network devices. Especially in Win8/8.1 systems.
These wireless USB devices have many issues with Win7 and later - using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win8/8.1 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.



Quite a few Live Kernel Events and some possible hardware issues in the WER section of MSINFO32.
Please do the following:
- open Event Viewer (run eventvwr.msc from the "Run" dialog))
- expand the Custom Views category (left click on the > next to the words "Custom Views")
- right click on Administrative Events
- select "Save all Events in Custom View as..."
- save the file as Admin.evtx
- zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
- upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).

FYI - If we're looking for Event ID 41 errors (unexplained shutdowns), there's more info on that here: Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first" in Windows 8.1, Windows 8, Windows Server 2012 R2, Windows Server 2012, Windows 7, or Windows Server 2008 R2

While waiting for a reply, please monitor your temps with this free utility: HWMonitor CPUID - System & hardware benchmark, monitoring, reporting

The memory dumps don't show a lot, and it takes at least 4 or 5 to see a hardware pattern (actually it's a lack of a pattern that shows that it's likely to be hardware/low-level drivers). ALso, the relatively few 3rd party drivers present in the memory dump are also a possible indicator of a hardware/Windows problem. Make sure that you have ALL available Windows Updates.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

This one must be updated:
athurx.sys Mon Jan 4 22:23:16 2010 (4B42B0A4)
Atheros AR9271 Wireless Network Adapter [br][br]Atheros driver also written for - TP-LINK 150Mbps Wireless Lite N Adapter
http://www.carrona.org/drivers/driver.php?id=athurx.sys

If you cannot update this one, it must be uninstalled:
AsUpIO.sys Mon Aug 2 22:47:59 2010 (4C57835F)
ASUS hardware monitoring software related
http://www.carrona.org/drivers/driver.php?id=AsUpIO.sys

Update these drivers as they date from before Win8.1 was released:





AVer330.sys Thu May 24 07:19:04 2012 (4FBE1928)
AVerMedia H264 Codec Driver
http://www.carrona.org/drivers/driver.php?id=AVer330.sys

jraid.sys Mon Sep 17 02:50:31 2012 (5056C837)
JMicron RAID Driver
http://www.carrona.org/drivers/driver.php?id=jraid.sys

Rt630x64.sys Fri May 10 05:59:08 2013 (518CC4EC)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

savonaccess.sys Mon Jun 10 04:39:25 2013 (51B590BD)
Sophos Anti... Read more

http://www.eightforums.com/bsod-crashes-debugging/53273-bsod-during-games-multiple-error-codes-memory-related.html
Relevancy 74.82%

I just built a brand new system and to my dismay have have several bsod's I believe I have all the up to date drivers and have tried running memtest but found no errors I've run a disc check and also run sfc scannow times I've run driver Verify Still having bsod's so it's probably a driver BSOD: Multiple 0x0000003b, Codes: Error etc ntoskrnl.exe 0x00000024, issue right System Specs Microsoft Windows Home Premium -bit Intel R Core TM i - K CPU GHz ASRock Z Extreme Gen BIOS Date Ver Seagate TB HDD NVIDIA GeForce GTX Ti CORSAIR Vengeance gb DDR I've had some windows updates that fail to install One of which is sp I've tried using the system update readiness tool provided by MS Download System Update Readiness Tool for Windows for x -based Systems KB August - Microsoft Download Center - Confirmation which sucessfully installed the hotfix but sp still wouldn't install I followed MS's instructions to insert my win BSOD: ntoskrnl.exe Multiple Error Codes: 0x0000003b, 0x00000024, etc disk and install win as an upgrade with updates installed from the internet but still have some bsod's I'm also not sure if it's worth noting that my libraries are no longer working see attached jpg I've attached my dmp files from before the win upgrade and after I would be grateful for any help

A:BSOD: ntoskrnl.exe Multiple Error Codes: 0x0000003b, 0x00000024, etc

When I get home from work I'm going to try seating the ram in different mobo slots and try them out individually. If that doesn't work I'm going to try a clean windows install on another HDD I have. I'll post afterwords.

http://www.sevenforums.com/bsod-help-support/216647-bsod-ntoskrnl-exe-multiple-error-codes-0x0000003b-0x00000024-etc.html
Relevancy 72.67%

Had a BSOD on Sunday Took the sides off the computer to find the heatsink caked in dust Cleared that out with some compressed air and seemed to do the trick just fine Computer fan running much quieter too then All fine on Monday and then cranked the PC up this evening and BSOD again Couldn't get Windows to start so tried removing RAM errors, and 0x0000003B BSOD 0x00000050 error error multiple and then removing all hard drives except my boot drive containing Windows Set up BSOD multiple errors, error 0x00000050 and error 0x0000003B is SSD with Windows on second SSD with programs on HDD for files and data and second HDD for backup that set up has been running fine for some time Have managed to get Windows to load and no BSOD currently with three drives plugged in and the main HDD for data NOT plugged in Not sure if that drive is the common problem Some BSOD messages I have seen before it vanishes include PAGE FAULT IN NONPAGED AREA and REGISTRY ERROR and SYSTEM SERVICE EXCEPTION Any help and advice much appreciated The diagnostic data was run without said HDD plugged in Brief update PC still running but trying to shut down I get a Windows Explorer has stopped working error as below Could this be linked to the other drive not being plugged in The unplugged drive contains my 'Desktop' so I wonder if this is confusing Windows somehow Only way to shut down seems to be to just power off Problem signature Problem Event Name APPCRASH Application Name Explorer EXE Application Version Application Timestamp d ee Fault Module Name SHELL dll Fault Module Version Fault Module Timestamp dd c Exception Code c Exception Offset c OS Version Locale ID Additional Information Additional Information a f f b d e db Additional Information bfa Additional Information bfac edc eca a addb c a f

A:BSOD multiple errors, error 0x00000050 and error 0x0000003B

Hiya and welcome to SevenForums!

Code:
BugCheck A, {fffff900008d1ee9, 0, 0, fffff80002ad41dc}

Probably caused by : win32k.sys ( win32k!AllocThreadBufferWithTag+24 )

Followup: MachineOwner
Hmm, re-install Windows as your getting 0x51 errors because 0x51 errors are registry related errors.

http://www.sevenforums.com/bsod-help-support/373684-bsod-multiple-errors-error-0x00000050-error-0x0000003b.html
Relevancy 71.38%

Hi I have multiple problems with my computer and I am not sure whether they are system or hardware related I recently quot inherited quot this computer from a friend who has moved abroad for work he did warn me that it had a few glitches Screen cuts out when playing some games most recently demo of Risen after about mins each time game and computer appear to still be running however power led goes from green to orange and I have to restart the computer screen bsod, at errors, out, multiple cut error startup! to get a picture after a restart multiple errors, bsod, screen cut out, error at startup! or shutdown get quot unexpected shutdown quot message when playing games occasionally the cursor will appear to quot pick up quot elements of the display might be the odd line or a few pixels the sound will then glitch and start juddering i e like a stuck record but much faster This has happened most recently in mount and blade on very low settings The computer will sometimes then crash completely occasional bsod do not know how to get details sorry specs from original purchase as follows display drivers and vista updates all current as of today AREA- R NVIDIA NFORCE I ULTRA SLI MOTHERBOARD x PATRIOT GB DDR MHZ LL PC - AW recently replaced with matched corsair gb after memtest picked up a few hundred errors v quickly SEAGATE GB SATA RPM MB CACHE LG X DUAL-LAYER DVD RE-WRITER NON-LIG KILLER NIC K quot INTEGRATED HIGH-DEF AUDIO NVIDIA C -MB NVIDIA GEFORCE GX GB VISTA PREMIUM COA BIT R NERO R NERO R DL ALIENWARE MAIN BOARD RGB REV CONTROL ELC CARD PASSIVE R AVC PENTIUM DUAL CORE EE HSF R Z H K WATT OEM ATX PSU KILOWATT MOUNTING BRACKET AMTEK PIN TO PIN MOLEX Apologies it has been a long time since been involved in home computing last one was a p so somewhat of a novice

A:multiple errors, bsod, screen cut out, error at startup!

extra info, more to come!

http://www.techsupportforum.com/forums/f299/multiple-errors-bsod-screen-cut-out-error-at-startup-427942.html
Relevancy 70.95%

System Windows ultimate x retail most components are brand new months old HDDs are a few years old except primary which is SSD from last year One of my HDDs is old but not used for system stuff at all and is being replaced soon I work from home as a remote repair dude so needing help is a little embarrassing I generally use whocrashed for BSODs but I cannot isolate the cause here Reinstalled windows a month ago still crashing like crazy Video drivers up to date as of last week Attached is dumps and perfmon data Perfmon says a disk has the dirty bit set but that's an image of different Multiple NTOSkrnl.exe BSODs, usually errors but daily, my pre-reinstall of the OS so I could get data from it readily incase anything decided to be real dumb on the Multiple BSODs, daily, usually NTOSkrnl.exe but different errors reinstall I just copied the whole system drive partition to my USB HDD apparently that copied the dirty bit too WinDBG doesn't seem to provide a lot of data whocrashed doesn't summarize but I'm still a little dumb on dump analysis Attached is the last week's worth of BSODs as I recently cleared the folder because it had a lot of dumps in it which I realize now is dumb heh I'm working through the BSOD analysis guide but I would really like some fast help on this if at all possible before I go crazy or get canned for BSODing while in call Let me know if I failed to provide anything

A:Multiple BSODs, daily, usually NTOSkrnl.exe but different errors

Hello,

No shame in asking for an assist, none of us are experts in everything! Stick around and you'll see we all ask questions and answer questions.

I'd think this is a hardware problem, quite frankly. Given the frequency dwm.exe and dxgkrnl.sys are mentioned, if I could only make one guess, it would be that your video card is somehow related. Possibly faulty, more likely underpowered. I'll leave it at that, as I'm assuming you can handle things from there as a technician. I'm perfectly willing to go into more detail on request, however.

My #2 guess would be the RAM. While video-related problems could certainly cause those errors, system memory has been known to do the same. I'd recommend you run the Blend Prime95 test, and perhaps run Memtest86 when you can.

Hardware - Stress Test With Prime95

RAM - Test with Memtest86+

...Summary of the dumps:

Code:

Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Wed Mar 28 13:43:02.971 2012 (UTC - 4:00)
System Uptime: 0 days 0:28:38.157
*** ERROR: Symbol file could not be found. Defaulted to export symbols for win32k.sys -
Probably caused by : dxgkrnl.sys ( dxgkrnl!HMGRTABLE::AllocHandle+131 )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: VDeck.exe
FAILURE_BUCKET_ID: X64_0x50_dxgkrnl!HMGRTABLE::AllocHandle+131
BiosReleaseDate = 08/18/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Wed Mar 28 13:13:30.873 2012 (UTC - 4:00)
System Uptime: 0 days 20:08:41.449
*** ERROR: Symbol file could not be found. Defaulted to export symbols for win32k.sys -
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+118b )
BUGCHECK_STR: 0x19_3
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0x19_3_nt!ExDeferredFreePool+118b
BiosReleaseDate = 08/18/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Tue Mar 27 17:04:07.374 2012 (UTC - 4:00)
System Uptime: 1 days 15:23:01.560
Probably caused by : memory_corruption ( nt!MiDereferencePerSessionProtos+2e )
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0x3B_nt!MiDereferencePerSessionProtos+2e
BiosReleaseDate = 08/18/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Mon Mar 26 01:39:51.439 2012 (UTC - 4:00)
System Uptime: 9 days 18:10:19.632
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_PROCESS_HEAP::MapViewOfAllocation+15d )
PROCESS_NAME: dwm.exe
BUGCHECK_STR: 0x7E
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
FAILURE_BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_PROCESS_HEAP::MapViewOfAllocation+15d
BiosReleaseDate = 08/18/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Fri Mar 16 07:23:31.073 2012 (UTC - 4:00)
System Uptime: 0 days 19:53:27.275
*** ERROR: Symbol file could not be found. Defaulted to export symbols for win32k.sys -
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
BUGCHECK_STR: 0x4E_99
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: X64_0x4E_99_nt!MiBadShareCount+4c
BiosReleaseDate = 08/18/2011
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Thu Mar 15 11:29:22.501 2012 (UTC - 4:00)
System Uptime: 0 days 17:57:59.703
Probably caused by : memory_corruption (... Read more

http://www.sevenforums.com/bsod-help-support/221577-multiple-bsods-daily-usually-ntoskrnl-exe-but-different-errors.html
Relevancy 70.52%

Hello everyone on the forums, i have been experiencing quite a bit of trouble with my system recently. It has been crashing a lot sometimes with BSoDs and sometimes without it. When it crashes without BSoDs my screen goes all fuzzy like there is some graphics distortion or something and i will have to use the reset button. Also it tends to crash more when im running SW:TOR or WoW

My System Specs are as follows
Windows 7 64Bit Full Retail version
System is roughly 4 to 5 years old (cant rem exactly)
OS was installed about half an year ago
AMD XII 640
Radeon 4770 card
On board sound
ACBEL 550W
4x 2gb kingston ddr3 1333 MHz ram
4 x HDD of various sizes

A:BSOD mostly related to NTOSKRNL.exe

Security Software:
Code:
avgnt.exe c:\program files (x86)\avira\antivir desktop\avgnt.exe 2712 8 200 1380 2012/3/22 11:53 10.0.13.18 275.16 KB (281,768 bytes) 2011/8/22 21:57
sched.exe c:\program files (x86)\avira\antivir desktop\sched.exe 1452 8 200 1380 2012/3/22 11:52 10.0.0.21 133.16 KB (136,360 bytes) 2011/8/22 21:57


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Kingston\BSODDmpFiles\kharistos\Windows_NT6_BSOD_jcgriff2\032212-48141-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16917.amd64fre.win7_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`02a1a000 PsLoadedModuleList = 0xfffff800`02c56e70
Debug session time: Wed Mar 21 21:29:09.506 2012 (UTC - 6:00)
System Uptime: 0 days 0:00:07.926
Loading Kernel Symbols
...............................................................
.................
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff6fe50002b30, 0, fffff80002a9be88, 5}
Could not read faulting driver name
Probably caused by : CI.dll ( CI!SHATransform+236 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff6fe50002b30, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80002a9be88, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cc10e0
fffff6fe50002b30

FAULTING_IP:
nt!MiLockProtoPoolPage+38
fffff800`02a9be88 4a8b3c36 mov rdi,qword ptr [rsi+r14]

MM_INTERNAL_CODE: 5

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: System

CURRENT_IRQL: 0

TRAP_FRAME: fffff8800319fa00 -- (.trap 0xfffff8800319fa00)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=00000000c51c1a7e rbx=0000000000000000 rcx=0000000081002702
rdx=000000002b375eb2 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000cdacd6 rsp=fffff8800319fb90 rbp=0000000000418bcd
r8=00000000c221f9e4 r9=000000009140672b r10=00000000f6e8e0d3
r11=000000006fc9d785 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po cy
CI!SHATransform+0x236:
fffff880`00cdacd6 8b7334 mov esi,dword ptr [rbx+34h] ds:00000000`00000034=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002b08ed1 to fffff80002a8a540

STACK_TEXT:
fffff880`0319f448 fffff800`02... Read more

http://www.sevenforums.com/bsod-help-support/220547-bsod-mostly-related-ntoskrnl-exe.html
Relevancy 70.52%

I get random BSOD's maybe minutes after start-up It seems to be related to driver ntoskrnl exe I have tried all kind of things that I found on related threads memtest for hours no error driver verifier I updated BIOS updated drivers etc even did reinstalls of Windows however the problems keeps coming back I am about to bring the computer to a computer store but wanted to post this to see if anyone knows a solution Below the to related ntoskrnl.exe BSOD dump files since my last Windows reinstall Hopefully there someone who can help me Thanks in advance Dump File - - dmp Crash Time - - Bug Check BSOD related to ntoskrnl.exe String DRIVER IRQL NOT LESS OR EQUAL Bug Check Code x d Parameter Parameter Parameter Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe bc File Description NT Kernel amp System Product Name BSOD related to ntoskrnl.exe Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe bc Stack Address Stack Address Stack Address BSOD related to ntoskrnl.exe Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time - - Dump File - - dmp Crash Time - - Bug Check String MEMORY MANAGEMENT Bug Check Code x a Parameter Parameter fffff a Parameter c b Parameter fffff a Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe bc File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe bc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time - - Dump File - - dmp Crash Time - - Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter fffff a f b Parameter Parameter ffffffff ffffffff Caused By Driver fltmgr sys Caused By Address fltmgr sys File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe bc Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time - -

A:BSOD related to ntoskrnl.exe

Please click on this link and follow these directions and post in that section of the forum and not here. Thank You. Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista

http://www.techsupportforum.com/forums/f217/bsod-related-to-ntoskrnl-exe-906458.html
Relevancy 70.52%

Hi,

I'm having problems with my PC, and it's driving me crazy. It ramdomly goes on blue screens. I used a program named BlueScreenView, it says the causing of that BSODs is a file named ntoskrnel.exe. I also runned MemTest with no errors reported.

I don't know what to do, i send to you an attachement with info of my sistem as requested in the rules.

My system specs.

Pentium IV HT 3,0Ghz
Motherboard Gigabyte GA-8N-SLI Pro
5 GB RAM DDR2 667
ATi radeon x1300 graphic card
Ask for any further info you need
Thanks!

A:BSOD related with ntoskrnl.exe

I could use a little help here... Thanks!!!

http://www.sevenforums.com/bsod-help-support/166244-bsod-related-ntoskrnl-exe.html
Relevancy 70.52%

Memtest has been run and passed with flying colors. This computer build is less than a month old. Let me know what you find and I will be HAPPY to oblige with more tests or whatever is needed. Thanks in advance.

A:BSOD related to ntoskrnl.exe

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

Any particular reason that you are not using UEFI or Secure boot?

SSD's were temperamental when they first came out, but their reliability has improved greatly over the last year or two. There are 2 things that MUST be checked on systems with BSOD's and SSD's:




1) That the SSD firmware is the latest available for the SSD. I usually can't see this info in the reports, so I rely on you to check it.
2) That the storage controller drivers on the motherboard are the most recent. They must date from late 2012 or later. This is ALL controllers, not just the one that the SSD is attached to. If involved these should be visible in the memory dump - but it doesn't hurt to check manually.



Uninstall Corsair Link software - it is known to cause BSOD's on some Windows systems.

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Fri Nov 15 20:44:39.331 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\111513-14437-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
System Uptime:0 days 0:31:05.035
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by :win32k.sys ( win32k+128b50 )
BugCheck 3B, {c0000005, fffff80246d02140, ffffd000263abe70, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80246d02140, Address of the instruction which caused the bugcheck
Arg3: ffffd000263abe70, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: dwm.exe
FAILURE_BUCKET_ID: 0x3B_win32k+128b50
BIOS Version 1602
BIOS Release Date 09/16/2013
Manufacturer To be filled by O.E.M.
Product Name To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
**************************Thu Nov 14 23:08:15.696 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\111413-11500-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
System Uptime:0 days 0:10:37.399
Probably caused by :ntkrnlmp.exe ( nt!KxWaitForLockOwnerShip+12 )
BugCheck 1000007E, {ffffffffc0000005, fffff8027644e9a2, ffffd00020be7748, ffffd00020be6f50}
BugCheck Info: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8027644e9a2, The address that the exception occurred at
Arg3: ffffd00020be7748, Exception Record Address
Arg4: ffffd00020be6f50, Context Record Address
PROCESS_NAME: System
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
FAILURE_BUCKET_ID: AV_nt!KxWaitForLockOwnerShip
BIOS Version 1602
BIOS Release Date 09/16/2013
Manufacturer To be filled by O.E.M.
Product Name To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
**************************Thu Nov 14 22:57:06.013 2013 (UTC - 5:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\111413-11843-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.16422.amd64fre.winblue_gdr.131006-1505
System Uptime:0 days 0:11:15.717
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
Probably caused by :ntkrnlmp.e... Read more

http://www.eightforums.com/bsod-crashes-debugging/35590-bsod-related-ntoskrnl-exe.html
Relevancy 70.52%

Hey there. I'am on a fresh install of windows 8.1 and I keep getting this BSOD related to the ntoskrnl.exe.

Running windows 8.1
CPU: 3770k
mobo: p8z77-LK
ram: Patriot 2000mhz 8GB
GPU: SLI EVGA 780 SC
Seems to happen when I watch twitch.tv and play a game at the same time.

Here are the last 4 or so dump files that I have had. I don't have any xp in reading these files and finding out what is wrong. Would someone be able to push me in the right direction of how to fix these crashes?

122814-6437-01.zip

A:BSOD related to ntoskrnl.exe

Looks like some sort of memory corruption. I would try to run a memory diagnostic test such as Memtest86 and let it run a few times to see if any errors occur.

http://www.eightforums.com/bsod-crashes-debugging/59857-bsod-related-ntoskrnl-exe.html
Relevancy 70.52%

Hi all,

My computer BSOD's and shuts down after a few minutes of running a game. After this it wouldn't boot Windows and went to the recovery menu, but it did boot in Safe Mode. I managed to do a System Restore which recovered it, but when I had another go the same thing happened. I used BlueScreenView to have a look at the error file and it was pointing at ntoskrnl.exe, I had a look on Google but didn't find much to help me. Apart from this it has run with no problems so far.

The relevant files are attached, if I have got anything wrong or you want any more please let me know. Any help would be greatly appreciated as I would like to avoid this happening again.

Computer details:
Advent DT1413 ( see here)
Windows 7 64 bit, as purchased by me from retailer
Approx 1 year old
All hardware as sold

Relevancy 70.52%

I just installed windows -bit on my new computer and everytime I'd do something like install avast anti-virus or add gadgets too quickly i'd get these blue screens I used BlueScreenView to see what the problem was and the most common problem driver is this ntoskrnl exe I'm pretty sure there was no problems during the install and I'm sure all my drivers are updated I used this Uniblue Drive Scanner which said nothing was out of date Just in related ntoskrnl.exe with BSOD case this information is needed I'm running Professional with an AMD Phenom II x Processor ghz I've got gigs of DDR Ram and I BSOD related with ntoskrnl.exe went into my BIOS and upped the voltage from to cause I read somewhere that someone used that as a quick fix for the BSODs And I'm using a M A XTD Evo BSOD related with ntoskrnl.exe mobo and a ATI Radeon HD video card DirectX I've attached the dmp files from my minidump folder Thanks in advance to anyone who can help me out

A:BSOD related with ntoskrnl.exe

  
Quote: Originally Posted by petezahut


I just installed windows 7 64-bit on my new computer and everytime I'd do something like install avast anti-virus or add gadgets too quickly, i'd get these blue screens.

I used BlueScreenView to see what the problem was, and the most common problem driver is this ntoskrnl.exe

I'm pretty sure there was no problems during the install, and I'm sure all my drivers are updated (I used this Uniblue Drive Scanner, which said nothing was out of date).

Just in case this information is needed: I'm running 7 Professional, with an AMD Phenom II x4 965 Processor (3.40 ghz). I've got 4 gigs of DDR3 Ram (and I went into my BIOS and upped the voltage from 1.5 to 1.9 cause I read somewhere that someone used that as a quick fix for the BSODs). And I'm using a M4A79XTD Evo mobo and a ATI Radeon HD 4800 video card (DirectX 11)

I've attached the dmp files from my minidump folder. Thanks in advance to anyone who can help me out.



hi and welcome

pretty straight what the problem is but not what caused it. These were likely caused by memory corruption.. the faulty driver cannot be determined

I would
download memtestx86 and run it for 5 passes

run a system file check to verify and repair your system files
type cmd in search>right click and run as admin>sfc /scannow
if you are overlocking stop
Ken J+


Code:
123109-27690-01.dmp 12/31/2009 3:14:39 AM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`02210040 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+71f00
123109-16879-01.dmp 12/31/2009 1:43:09 AM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff6dc`50036488 00000000`00000000 fffff800`028a2ae2 00000000`00000005 ntoskrnl.exe ntoskrnl.exe+71f00
123109-19422-01.dmp 12/31/2009 1:33:54 AM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff6f3`400000f0 00000000`00000000 fffff800`0289eae2 00000000`00000005 ntoskrnl.exe ntoskrnl.exe+71f00
123109-25537-01.dmp 12/31/2009 2:05:28 AM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffffa98`0169504b 00000000`00000000 fffff800`028d4d3b 00000000`00000005 ntoskrnl.exe ntoskrnl.exe+71f00
123109-26941-01.dmp 12/31/2009 3:13:20 AM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffffe80`06200118 00000000`00000000 fffff800`02d6864c 00000000`00000007 ntoskrnl.exe ntoskrnl.exe+71f00
123109-26192-01.dmp 12/31/2009 2:07:11 AM PFN_LIST_CORRUPT 0x0000004e 00000000`00000099 00000000`0001680e 00000000`00000000 00000000`0001690e ntoskrnl.exe ntoskrnl.exe+71f00

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\123109-16879-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`0281d000 PsLoadedModuleList = 0xfffff800`02a5ae50
Debug session time: Thu Dec 31 04:42:04.693 2009 (GMT-5)
System Uptime: 0 days 0:03:08.410
Loading Kernel Symbols
...............................................................
................................................................
...........
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

http://www.sevenforums.com/bsod-help-support/51004-bsod-related-ntoskrnl-exe.html
Relevancy 70.52%

Hi there, this is my first time posting here.
I've been having these random BSOD lately, most on when playing Battlefield 3,
updated the drivers to the newest already, but still getting the BSODs.
Used bluescreenview and it pointed out that the most was caused by ntoskrnl.exe.
I really have no idea to solve this, and getting about five BSODs per day is pretty anoying.
Attached the SF Diagnostic Tool report, hoping to get some help.

A:BSOD most related to ntoskrnl.exe

The situation appears to be critical. Six BSODs today, with six different Bugcheck code. Depending on the situation, I think it is better to proceed slow and step by step.

What is most important information that you have SPTD installed, and as usual it is crashing.

Code:
fffff880`0aaea458 fffff880`01113adcUnable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0xb4adc
Keeping SPTD present in the system, no troubleshooting is meaningful.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall the program at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Next, Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Your C drive is substantially filled up? Copy the documents to the other partitions which is having enough free space.

Let us know the situation after doing these three. Depending on the situation we will decide our next steps.
______________________________________________________________________________________
BSOD ANALYSIS:

Code:
BugCheck 1000007E, {ffffffffc0000005, fffff88004220cee, fffff880077ea568, fffff880077e9dc0}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+22 )

Followup: MachineOwner
------------------------------------------------------------------------------------------------
BugCheck A, {fffff38006bfb778, 2, 1, fffff8000473bc8f}

Probably caused by : memory_corruption ( nt!MiIdentifyPfn+26f )

Followup: MachineOwner
-------------------------------------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff88001b8fdaa, fffff880039b6b60, 0}

Probably caused by : afd.sys ( afd!AfdBReceive+10a )

Followup: MachineOwner
-------------------------------------------------------------------------------------------------
BugCheck 1, {741c2e09, 0, f700, fffff8800a877b60}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )

Followup: MachineOwner
-------------------------------------------------------------------------------------------------
BugCheck 1E, {ffffffffc0000005, fffff800047be9bc, 0, ffffffffffffffff}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )

Followup: Pool_corruption
-------------------------------------------------------------------------------------------------
BugCheck 50, {fffff1a000004700, 1, fffff800049dfe3d, 7}
Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+884a )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/291490-bsod-most-related-ntoskrnl-exe.html
Relevancy 70.09%

So days ago I downloaded and installed a new game via steam devilian not that it probably matters bluescreens, errors related?) 116 (Video primarily Multiple driver and upon first starting it up bluescreen out of nowhere I haven't had a bluescreen with this laptop in a long time A dell inspiron n r and so this was pretty strange I believe the first crash was a crash timeout exception I booted up Multiple (Video driver related?) bluescreens, primarily 116 errors my computer again started looking into the crash and bluescreened again with nothing but firefox open Since then I've reinstalled all of my video drivers ran a Multiple (Video driver related?) bluescreens, primarily 116 errors chkdsk windows update and pretty much anything else I could think of As of right now I can't boot windows with a driver installed for my GPU If I uninstall the driver I can boot into the beautiful x stock windows driver setup and all seems well No issues whatsoever in safemode either The moment I try to install a driver it won't even get to the login screen for windows it crashes immediately after the windows startup graphic It seems to be slow loading drivers and such when it boots like that too although that might not have any bearing on anything I've tried cleaning my registry with CCleaner and a variety of other minor maintenance things people should probably do all the time It doesn't seem like a hardware fault - my gpu has only ever run on the cool side of quot warm quot and everything seems to function fine without any drivers installed even doing tasks that are relatively resource intensive This has been further complicated by the fact that my laptop has gpus the AMD Radeon HD m AND an Intel HD graphics I've tried updating the drivers for both although when I updated drivers for the Intel GPU it said it failed to load the driver some sort of registry error I've since used CCleaner and been unable to reproduce this but I don't know I've been chipping away at this non-stop since it happened and frankly it's a tangled mess trying to pinpoint the exact cause of the issue I'd really appreciate any help that can be offered even if it's just helping to narrow down the scope of what I'm looking for or related incidents with similar setups If there's any more information I can provide just let me know I'm a little frustrated right now and liable to have forgotten a lot of small details

A:Multiple (Video driver related?) bluescreens, primarily 116 errors

Please post the report of Windows Genuine and Activation Issue Posting Instruction

Please check if you can open msinfo32, search "msinfo32" and see if anything opens
If msinfo32 opens, save it as .nfo, try to open the .nfo
If you can open the .nfo, copy the saved file to a zip and upload the zip.

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
How to fill in your system specs:

http://www.sevenforums.com/bsod-help-support/387828-multiple-video-driver-related-bluescreens-primarily-116-errors.html
Relevancy 70.09%

Hi everyone I've been constantly experiencing random blue screen errors with different error messages such as INTERUPT EXCEPTION NOT HANDLED KMODE EXCEPTION NOT HANDLED PAGE FAULT IN NONPAGED AREA IRQL NOT LESS OR EQUAL My system at the moment is Windows Ultimate x AMD Athlon II X ghz Stock gb DDR mhz Biostar A L L mobo AMD Radeon HD GDDR gb gb Seagate hard drives I did have random messages errors, Constant error Multiple screen BSOD on gb of ram two gb Constant random BSOD errors, Multiple error messages on screen sticks which at first I thought there was a problem with the memory so I ran Memtest Constant random BSOD errors, Multiple error messages on screen and found out that one stick had lots of errors so I've sent that stick off to be replaced however the BSoD's still continue I've tried a fresh install of Windows which I encountered a BSoD during the install I did manage to install Constant random BSOD errors, Multiple error messages on screen a fresh copy of Windows on the hard drive though After installing the BSoD's still continued I went into the bios and underclocked the CPU from ghz to ghz because I thought that maybe the motherboard was under some kind of stress or couldn't handle the CPU at this clock speed This still didn't help as the BSoD's continued I thought it might be something to do with the onboard Realtek network chip as it crashed a good few times using any internet browser I've tried disabling the onboard network chip and using an addon wireless PCI card but this didn't seem to solve anything either The system seems to work fine for a while if I'm not running many programs but eventually blue screens If someone could help me solve this that'd be brilliant

A:Constant random BSOD errors, Multiple error messages on screen

Code:
BugCheck 3D, {fffff80000b9c120, 0, 0, fffff80002c7ed04}

Probably caused by : ntkrnlmp.exe ( nt!KiInterruptDispatchNoLock+2f4 )

Code:
0: kd> lmvm Rt64win7
start end module name
fffff880`04800000 fffff880`048be000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Thu Oct 25 10:20:09 2012 (50890449)
CheckSum: 000C14E6
ImageSize: 000BE000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your Realtek RTL8168D/8111D NIC driver seems to be rather outdated and causing problems, update the driver from here:Realtek
Install and perform full scans with:Malwarebytes : Free anti-malware download
Microsoft Security Essentials | Protect against viruses, spyware, and other malware


   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Good and Free system security combination.

http://www.sevenforums.com/bsod-help-support/286016-constant-random-bsod-errors-multiple-error-messages-screen.html
Relevancy 69.66%

I've been getting this BSOD for about a month now, maybe a bit longer. Some days it's fine, other days it'll crash several times per day. I'm not sure if this is related, but recently I've been getting lag time on my restart. It'll take ~15 seconds after windows 7 starts up where it will hang on a black screen before letting me do anything. Normally this is instantaneous.

I've noticed it most when I'm playing video games, specifically on the BYOND engine, but I'm not sure that's the cause. I'm not terribly opposed to doing an OSRI, but I'd like to avoid it if at all possible.

I should mention that I recently upgraded my video card, motherboard, and graphics card, all of which shouldn't be causing problems. These problem didn't happen at all prior to the upgrade, though, so it could be a problem with the new drivers. Not 100% sure. Thanks.

A:Getting a BSOD related to ntoskrnl.exe fairly often

Hiya and welcome to SevenForums!

Code:
BugCheck 3B, {c0000005, fffff80002dfc9cc, fffff8800aaa8ed0, 0}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )

Followup: Pool_corruption

Code:
BugCheck 1E, {ffffffffc0000005, fffff88003044fb0, 0, 0}

Unable to load image bflwfx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for bflwfx64.sys
*** ERROR: Module load completed but symbols could not be loaded for bflwfx64.sys
Probably caused by : bflwfx64.sys ( bflwfx64+f4eb )

Code:
BugCheck 3B, {c0000005, 20802068, fffff8800a1f7ba0, 0}

Unable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1e1d55 )

Code:
BugCheck 18, {fffffa800c767f30, fffffa801068eb50, 1, 1000000000000}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4874a )

Code:
BugCheck 1E, {0, 0, 0, 0}

Unable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::UnreferenceDmaBuffer+7d )

Code:
BugCheck 3B, {c0000005, fffff880016343dd, fffff8800bc378b0, 0}

Probably caused by : NETIO.SYS ( NETIO!NsiEnumerateObjectsAllParametersEx+24f )

Code:
BugCheck 50, {fffff260c0ac58f0, 0, fffff960000cde00, 7}
Could not read faulting driver name
Probably caused by : memory_corruption

Followup: memory_corruption

Code:
BugCheck 3B, {c0000005, fffff80002c6cf37, fffff8800975bc10, 0}

Probably caused by : ntkrnlmp.exe ( nt!AlpcpQueueIoCompletionPort+2c7 )

Code:
BugCheck 3B, {c0000005, fffff9600016e912, fffff8800d470080, 0}

Probably caused by : win32k.sys ( win32k!DWP_GetEnabledPopup+3e )
Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again. This is the guide for DDU: Display Driver Uninstaller: How to use
Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

SFC /SCANNOW Command - System File Checker

Run MemTest86+, it must be MemTest86+ for 8 passes. RAM - Test with Memtest86+

Update your DirectX drivers.

Update your Bigfoot Networks Bandwidth Control Wireless NDIS Light Weight Filter driver.

http://www.sevenforums.com/bsod-help-support/376783-getting-bsod-related-ntoskrnl-exe-fairly-often.html
Relevancy 69.66%

Hey My computer is a custom built computer BSOD dxgkrnl.sys related ntoskrnl.exe and ordered form a website called quot Komplett se quot I've had problems with BSOD from the day I bought this computer ca - years ago The BSOD doesn't follow a certain pattern in other words it sometimes occur when BSOD ntoskrnl.exe and dxgkrnl.sys related playing games for instance League of Legends and sometimes when browsing the web currently I am using Google Chrome Today th of November the screen froze when I was browsing the web and after a few seconds a blue screen appeard saying something about quot A clock interrupt was not recieved on a seconday processor within the allocated time interval quot see attachment bellow - this is not what normally happens What usually happens BSOD ntoskrnl.exe and dxgkrnl.sys related is that screen freezes and then I hear this constant continous tone quot BEEEEEEEEEEEEP quot which doesn't stop until the computer is shut down I've done some research and found out that a cotnious beep means that something is wrong with the powersupply to the motherboard not sure if this fact is true or false thou I've also had problem with not beeing able to wake my computer up from powersaving mode if this is relevant computer fans runs but nothing is displayed on my screen using HDMI cable I've followed the guide on how to grab and attach all the necessary files and hopefully I have done it correctly I have also attached a print screen from a program called quot Bluescreen view quot if it helps Thanks in advance Robin aka Hackerlacka

A:BSOD ntoskrnl.exe and dxgkrnl.sys related

Welcome to SF, Hackerlacka .

The majority of the bug checks are a TDR (Timeout Detection & Recovery) and its not a real crash
in the sense that something wrong occurred in the Kernel.







  
Quote: Originally Posted by TVeblen


"Display driver xxxxx stopped responding and was recovered"

Timeout Detection & Recovery (TDR) = "Display Driver Stopped Responding and was Recovered" is a useful feature that started in Vista and is also in W7 that allows the OS to try and recover from a video timeout so that the system does not crash to a bluescreen. Symptoms included a screen flash with the TDR message appearing one or more times or the screen blinking out to black. If the system cannot recover it will crash (Stop Error 116 typical). The issue is that the video card is not responding as expected.
.
.
.
.
There are numerous reports of hardware solutions to TDR's. The most common are:
Poor Cooling
Problems with the power supply
Overclocking Issues
Bad System memory or incorrect memory timings
Defective PC Components



More details HERE, please read.


What is the make, model and age of your PSU?
Fill out this form and post back the result:
Power Supply Calculator


Roll back your GPU driver to a known stable release:






  
Quote: Originally Posted by Arc


Install the 314.22 WHQL only.

Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Boot normally now. Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:



Testing the RAM:








  
Quote: Originally Posted by koolkat77


Test and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+


   Tip
Pay close attention to part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.




When done with the testing procedure take a picture and upload it here.
Test for thermals and stability:
Download HWinfo and post a Screenshot of the sensors window, one at idle and another while putting load on the PC using Prime95 for the CPU side and Furmark for the GPU.Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).


One of the bug checks (as you know) is a 0x101, unfortunately this bug check code doesn't contain enough information in the minidump file be analyzed fully.
Please upload the Kernel dump file using Dropbox or Skydrive, the file is located in the Windows directory
and is usually a few hundred Megabytes in size.

Code:
C:\Windows\MEMORY.dmp
BSODTutorials: How to Upload Kernel Memory Dumps to Skydrive

http://www.sevenforums.com/bsod-help-support/313532-bsod-ntoskrnl-exe-dxgkrnl-sys-related.html
Relevancy 69.66%

Built this comptuer for friend
Crashed twice
Brand new computer
Fresh windows install
Thought it was the hdd, but got it replaced and still crashes.
His specs Intel Core i5-3470, PowerColor Radeon HD 7850, Rosewill BlackHawk - Ricky - SpyPossum's Saved Part List - PCPartPicker
Help would be very appreciated!

A:BSOD while downloading it seems, related to ntoskrnl.exe

There doesn't appear to be any dump files, check this directory:


Code:
C:\Windows\Minidump
Otherwise, I would also suggest checking here:


Code:
C:\Windows\MEMORY.DMP
If there is any files within the latter directory, then please place them into a zipped folder, and upload to the Public folder of a Skydrive or Dropbox account. Post URL to the file in your next post.

http://www.sevenforums.com/bsod-help-support/311933-bsod-while-downloading-seems-related-ntoskrnl-exe.html
Relevancy 69.66%

Hello!

For around a week now I've gotten some random BSOD's every now and then.
I have been trying to search for it and solve it but it seems just keeps coming back.

Have run the SF Diagnostic Tool and here is the folder:
Thanks in advance!

A:BSOD every now and then Win7, ntoskrnl.exe related

AVG is contributing to your bsod. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

TuneUpUtilitiesDriver64.sys Thu Sep 17 17:54:52 2009 (4AB2238C)
TuneUpUtilitiesDrv
Driver Reference Table - TuneUpUtilitiesDriver64.sys





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer


RTCore64.sys Tue Sep 6 18:24:50 2011 (4E661112)
RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
Driver Reference Table - RTCore64.sys

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

dtsoftbus01.sys Fri Jan 13 19:45:46 2012 (4F10358A)
Daemon Tools driver [br] Possible BSOD issues in Win7
Driver Reference Table - dtsoftbus01.sys

Daemon Tools/Alchohol is known to cause BSODs:
How to remove sptd.sys from system
Registry and SPTD problems | DAEMON Pro Help

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

mvxxmm.sys Fri Dec 25 12:45:15 2009 (4B345F7B)
Marvell Aux NV Bridge DLL - related to mv91xx SCSI HD Controller
Driver Reference Table - mvxxmm.sys

mv91xx.sys Fri Dec 25 12:45:39 2009 (4B345F93)
Marvell MV91xx AHCI/RAID driver
Driver Reference Table - mv91xx.sys

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

Run Disk Check on your Hard Drive(s): Disk Check

Post screenshot(s) of your Hard Drive(s) using Crystal Disk Info Software: CrystalDiskInfo - Software - Crystal Dew World

Run a Hard Drive test: http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html


Check for heating issues using Speccy or HWmonitor

Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

Keep us posted.

http://www.sevenforums.com/bsod-help-support/322557-bsod-every-now-then-win7-ntoskrnl-exe-related.html
Relevancy 69.66%

Hello All,

First of all, thank you for taking the time to help strangers on the internet! Seriously, very, very awesome of you.

I have had periodic bluescreen events since I built this computer, but they seem to be getting closer together. I haven't been able to identify any obvious causes and have rechecked to make sure all connectors are well seated.

I've attached the zip file containing the SF_Diagnostic_tool results.

I'd love some feedback on what you all think may be the root cause as well as how you identified it from the files.

Thanks in advance!

Greg

A:BSOD - DRIVER_POWER_STATE_FAILURE related to ntoskrnl.exe

Hi Gregidon.

Follow the tutorial Power Plan Settings - Change

When you are at Step 5, Expand:
Hard Disk > Turn Off Hard Disk after: Minutes 0.
Apply> OK.

Attachment 305416

Eventually it will then display as turn off after never.

After doing it, put the computer to sleep for a few times, make it wake up. Report us if it is BSODing out in the same way or not.

http://www.sevenforums.com/bsod-help-support/321278-bsod-driver_power_state_failure-related-ntoskrnl-exe.html
Relevancy 69.66%

Hi I've recently joined a technical support team and have been given a dell desktop optiplex that's had constant BSOD issues going back months I've been told the OS win has been reinstalled several times and the issues doesn't seem to go away Based on that I figured it must be a hardware issue I did a diagnostic test in the bios had the computer freeze up during the diagnostic and Dell sent a technician to ntoskrnl.exe and BSOD to related atikmdag.sys replace the motherboard as a tech mentioned the error code related to the motherboard Well the motherboards been replaced and I'm still getting BSODs The timing of the BSOD is random the computer will run anywhere from mins to a couple hours but the BSOD is pretty consistant I thought I BSOD related to ntoskrnl.exe and atikmdag.sys had it narrowed down to corrupt ATI drivers a couple days ago and reinstalled a redownloaded driver software from dells support page but again the BSOD is back The most common BSOD error code is x although I get several And running bluescreenview to check dmp files the most common drivers causing the BSODs are ntoskrnl exe and atikmdag sys Any help would be GREATLY appreciated

A:BSOD related to ntoskrnl.exe and atikmdag.sys

Hi
 
to the Bleeping Computer forum
 
Please follow the below steps.
 
 Test the system memory thoroughly using Memtest86+ . 
 
Read this article first : http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
 
You should run at least seven or more passes for an accurate result. I recommend running 10 passes. As it may take several hours to complete, it is better to run it overnight.
 
Following video will give you a better idea about the test.
 
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
 
Report whether it detects any errors during the test.
 
Upload the crash dumps for inspection.
 
Open C:\Windows\minidump folder and copy all the crash dump files to another temporary folder. Zip that folder and upload it to any free file hosting site.
 
For example :
 
http://www.mediafire.com/
 
https://www.box.com/
 
 
 Download and run Minitoolbox from http://www.bleepingcomputer.com/download/minitoolbox/
 
    Run the tool and only select the following tick boxes.
 
    -List last 10 Event viewer errors
    -List installed programs
    -List devices
    -List users, partition and memory size
 
Now click "Go" and post the output in next reply  (or upload the result.txt with dump files) 

http://www.bleepingcomputer.com/forums/t/502300/bsod-related-to-ntoskrnlexe-and-atikmdagsys/
Relevancy 69.66%

Over the course of a few months I've been getting BSODs randomly and they have all been related to the process "Ntoskrnl.exe". If I recall, I get the BSOD whenever I have been downloading something from the internet.

I've attached the SF_DD_MM_YYYY.zip file to this post.

Any help or a solution would be appreciated.

A:Recurring Ntoskrnl.exe Related BSOD

Hi please run this so your pc saves the minidumps properly as their is none in the bsod analyses tool.
http://www.sevenforums.com/attachmen...mp_on_bsod.reg
Once u have done that, run the analysis tool after your next BSDD.

http://www.sevenforums.com/bsod-help-support/300839-recurring-ntoskrnl-exe-related-bsod.html
Relevancy 69.66%

Hi everyone My new build is giving my headaches I get memory mostly related ntoskrnl.exe when win 8.1 gaming BSOD management and PFN List Corrupt BSOD's when running games usually they are fine running a very demanding game on full settings but when I load unload a new map or level or close a game down it can happen Rome II is quite bad for them I've seen one on Dota and one when using Chrome to watch youtube too So far I've Done several clean installs Looked at both all the latest drivers I could find provided by slimdrivers etc or tried leaving the barebones stock drivers on the system to see if that makes a difference Grabbed all the windows updates Ran memtest on my ram overnight no problems Ran VMT on my graphics card memory no issues Carried out sfc ntoskrnl.exe related BSOD win 8.1 mostly when gaming scannow - It did come up with some errors I used dism commands to restore the image n stuff re-scanned and nothing shows up now Carried out a full chkdsk r Reseated everything inside my machine Updated bios made sure bios had my memory timings correct Disabled a few of it's spicy power saving features but I don't really know what I'm doing in bios to be honest I tried to use driver verifier but it keeps crashing on boot so disabled for now I'm pretty rubbish at computers so even if I've already done something I'm willing to try again According to Whocrashed everything is happening in the ntoskrnl exe module whatever that means SF dumps attached Thanks again

A:ntoskrnl.exe related BSOD win 8.1 mostly when gaming

All BSOD's indicated you might have a bad RAM stick. If you used the Windows Memory test, sometimes it will not detect errors. Try to re-seat your RAM and you can also increase the RAM voltage in BIOS by .1 ~ .15

Download: Memtest86+ - Advanced Memory Diagnostic Tool and run the test for at least 6-8 hours or 5 passes unless errors occur before.

http://www.eightforums.com/bsod-crashes-debugging/50388-ntoskrnl-exe-related-bsod-win-8-1-mostly-when-gaming.html
Relevancy 69.66%

Built this comptuer for friend
Crashed "hard" as he put it
Brand new computer
Fresh windows install
Thought it was the hdd, but got it replaced and still crashes.
His specs Intel Core i5-3470, PowerColor Radeon HD 7850, Rosewill BlackHawk - Ricky - SpyPossum's Saved Part List - PCPartPicker
Help would be very appreciated!

A:BSOD while downloading it seems, related to ntoskrnl.exe (probably)

Code:
On Sun 24/11/2013 6:00:35 AM GMT your computer crashed
crash dump file: E:\BSOD\112313-23212-01.dmp
uptime: 00:02:38
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x1A (0x41790, 0xFFFFFA800414B070, 0xFFFF, 0x0)
Error: MEMORY_MANAGEMENT
You have some 0x1A, 0x7E and 0xF4 errors. Start with the 1A first : perform a thorough check of the RAM - minimum of 7 passes required.

RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/312785-bsod-while-downloading-seems-related-ntoskrnl-exe-probably.html
Relevancy 69.66%

Hello guys I need your help I bought a second-hand PC not from a store from a friend of mine and ever since the computer got to my home things got out of control Every application game crashes or eventually the computer itself gives me BSOD after short time of using This seems strange for me since i used that PC at my friend's house many times and it worked perfectly All the BSOD's are related to ntoskrnl exe link to the minidump files can be found here Here's the list of things i tried to help that - Reinstalling Windows many times many versions including Win Win Win - Updating drivers - Deleting leftover drivers - Scanning computer for viruses - Bought a brand-new motherboard RAM and HDD nothing changed after swapping hardware - sfc scannow - Leaving only one RAM stick in the slot - Trying different headsets keyboards mouses - Loading deafult BIOS settings My PC specs - MB ASUS H M-K - RAM x GB - CPU Intel Core i - - GPU MSI Geforce GT - OS Windows Ultimate bit Does anyone have an idea what can be the problem here amp how to fix it Any help would be much appreciated Also I'm not a native english speaker so if there is anything ntoskrnl.exe related BSOD's crashes to and you want me to clarify - I'll do it

http://www.sevenforums.com/bsod-help-support/401659-bsods-crashes-related-ntoskrnl-exe.html
Relevancy 69.66%

Hi,

Having these BSOD happen almost once a week. It never happens when gaming or doing anything demanding. It seems to happen alot when either watching Twitch or Netflix.

I have already ran a memtest with 7 passes with no errors.

Could really use some help to get some insight in this and maybe solve the problem im having.

Here is the DM log: DESKTOP-80HSUTF-ma_25-01-2016_140910,98.zip

Thanks alot in advance! If you should need more info please let me know and ill respond as soon as I can.

A:Random BSOD always related to ntoskrnl.exe

The latest dumpfiles do not point to specific drivers.

But there are a few pre windows 10 drivers .
usbfilter Thu May 07 10:43:50 2015 Part of AMD chipset
RTKVHD64 Tue Jul 30 14:06:46 2013 Realtek High Definition Audio Function Driver
AODDriver2 Tue Feb 11 12:06:52 2014 probably AMD Overdrive see here http://www.amd.com/en-us/markets/game/downloads

Update all the latest windows 10 drivers from your suppportpage of your mobo http://www.asrock.com/mb/AMD/970%20E...oad&os=Win1064

http://www.tenforums.com/bsod-crashes-debugging/38551-random-bsod-always-related-ntoskrnl-exe.html
Relevancy 69.66%

I set up a virtual machine on my laptop and while installing Windows 2000 onto it my computer crashed. Since then I cannot log into my user account or administrator without getting a BSOD crash. I seem to be able to log into safe mode with networking, but that crashes occasionally too.

I've also noticed two things since the crashes started: when I boot up, NUMLOCK is lit up (it didn't used to be,) and also I can't get Google Chrome to work since the crash.

Attached is my log from the Dump & System File Collection. I did not zip it with another file because when I type perfmon /report at the start menu I get an error message that the system cannot find the path specified.

Here are my system stats:
Windows 7 Home Premium with 64 bit OS, OEM and the original OS on the system.
The laptop is about 3 months old.

A:BSOD related to Isator/Ntoskrnl

  
Quote: Originally Posted by jaybeebrad


I set up a virtual machine on my laptop and while installing Windows 2000 onto it my computer crashed. Since then I cannot log into my user account or administrator without getting a BSOD crash. I seem to be able to log into safe mode with networking, but that crashes occasionally too.

I've also noticed two things since the crashes started: when I boot up, NUMLOCK is lit up (it didn't used to be,) and also I can't get Google Chrome to work since the crash.

Attached is my log from the Dump & System File Collection. I did not zip it with another file because when I type perfmon /report at the start menu I get an error message that the system cannot find the path specified.

Here are my system stats:
Windows 7 Home Premium with 64 bit OS, OEM and the original OS on the system.
The laptop is about 3 months old.


These were all caused by your iastor.sys driver. I would re-install the newest copy you can find


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\122810-33493-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 UP Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02a55000 PsLoadedModuleList = 0xfffff800`02c92e50
Debug session time: Tue Dec 28 11:53:33.204 2010 (GMT-5)
System Uptime: 0 days 0:00:58.890
Loading Kernel Symbols
...............................................................
................................................................
....................
Loading User Symbols
Loading unloaded module list
...
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck BE, {fffff80002b0f0f3, 2b0f121, fffff80005abd8c0, a}

Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
Probably caused by : iaStor.sys ( iaStor+52533 )

Followup: MachineOwner
---------

kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
An attempt was made to write to readonly memory. The guilty driver is on the
stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: fffff80002b0f0f3, Virtual address for the attempted write.
Arg2: 0000000002b0f121, PTE contents.
Arg3: fffff80005abd8c0, (reserved)
Arg4: 000000000000000a, (reserved)

Debugging Details:
------------------
CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xBE

PROCESS_NAME: taskhost.exe

CURRENT_IRQL: 2

TRAP_FRAME: fffff80005abd8c0 -- (.trap 0xfffff80005abd8c0)
NOTE: The trap fr... Read more

http://www.sevenforums.com/bsod-help-support/133923-bsod-related-isator-ntoskrnl.html
Relevancy 69.66%

Greetings I've been suffering from repeated blue screens the most recent of which have all been linked related ntoskrnl.exe BSOD to Repeated to the above-referenced file in the crash dumps There were blue screens involving other things prior to this Repeated BSOD related to ntoskrnl.exe but I have since reinstalled windows and no longer have dump files or data available The previous ones kept indicating NTFS file Repeated BSOD related to ntoskrnl.exe structure errors so I eventually reset my SSD to factory and reinstalled windows in an attempt to fix This is a fairly new PC build perhaps three months old and these issues have cropped up within the past month or so So far I have Checked for malware rootkits etc before and after reinstall of windows Thoroughly checked memory with Memtest Performed multiple Furmark Repeated BSOD related to ntoskrnl.exe stress tests on the GPU Pulled out and re-seated the video card Checked all connections for hardware Monitored voltages temps etc and found nothing unusual Rolled back to several previous AMD drivers for the GPU and rolled forward to beta drivers Put the cpu memory through the Prime grinder All of these failed to fix the issue or produce any errors or further blue screens Running out of ideas here Any help pointing me in the right direction would be very much appreciated at this point Please let me know if you need any additional information Thanks Mike

A:Repeated BSOD related to ntoskrnl.exe

I noted that your pagefile space is only 208 mB - please set the pagefile to "system-managed" size

If you're overclocking, please stop the overclock while we're troubleshooting. Feel free to resume the overclock once the system has been stabilized. i5 and i7 processors can be "auto-overclocked" by using Intel's TurboBoost feature. If so, it's safe to disregard this caution.




Processor may be overclocked!
Expected Frequency: 3400
Actual Frequency: 3503
Overclock Ratio: 1.03029



One of the memory dumps is Driver Verifier Enabled. Did you enable Driver Verifier? If so, what settings did you use?

This looks like a hardware problem to me - so start with these free hardware diagnostics: Hardware Diagnostics
Feel free to skip those tests that you've already run (recently).

Make sure that you get ALL available Windows Updates, and ALL available Wind8.1 updates for your system from Asus

Analysis:
The following is for informational purposes only.

Code:
**************************Wed Jul 9 21:38:39.267 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\070914-3906-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 2:14:44.975
Probably caused by :ntkrnlmp.exe ( nt!ObpCaptureHandleInformation+6b )
BugCheck 3B, {c0000005, fffff80297c86447, ffffd001df33e8c0, 0}
BugCheck Info: SYSTEM_SERVICE_EXCEPTION (3b)
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80297c86447, Address of the instruction which caused the bugcheck
Arg3: ffffd001df33e8c0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
BUGCHECK_STR: 0x3B
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: Steam.exe
FAILURE_BUCKET_ID: 0x3B_nt!ObpCaptureHandleInformation
CPUID: "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3503

Processor may be overclocked!
Expected Frequency: 3400
Actual Frequency: 3503
Overclock Ratio: 1.03029

BIOS Version 1402
BIOS Release Date 03/21/2014
Manufacturer System manufacturer
Product Name System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
**************************Wed Jul 9 10:54:00.000 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\070914-3968-01.dmp]
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 8:34:17.707
Probably caused by :ntkrnlmp.exe ( nt!KiSystemServiceExit+24b )
BugCheck 1, {7ffa42d0aeea, 0, ffff, ffffd000569c6b80}
BugCheck Info: APC_INDEX_MISMATCH (1)
Arguments:
Arg1: 00007ffa42d0aeea, Address of system call function or worker routine
Arg2: 0000000000000000, Thread->ApcStateIndex
Arg3: 000000000000ffff, (Thread->SpecialApcDisable << 16) | Thread->KernelApcDisable
Arg4: ffffd000569c6b80, Call type (0 - system call, 1 - worker routine)
BUGCHECK_STR: 0x1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: 0x1_VRF_SysCallNum_35_nt!KiSystemServiceExit
CPUID: "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3503

Processor may be overclocked!
Expected Frequency: 3400
Actual Frequency: 3503
Overclock Ratio: 1.03029

BIOS Version 1402
BIOS Release Date 03/21/2014
Manufacturer System manufacturer
Product Name System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
**************************Wed Jul 9 01:27:01.415 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\0... Read more

http://www.eightforums.com/bsod-crashes-debugging/49793-repeated-bsod-related-ntoskrnl-exe.html
Relevancy 69.66%

Hello all I'm new around here and I'm finding myself in the position to request your help for a problem My computer keeps crashing on me and the crashes seem to follow no apparent pattern I tried reinstalling Windows twice formatting the hard drive my system and drivers are up to date but the problem persists After some digging around I found that it is ntfs sys and ntoskrnl exe related This is what the minidump indicates when opened with BlueScreenView ntoskrnl.exe and BSOD ntfs.sys related I don't know what to do anymore Following the guidelines for BSOD posting I am attaching the perfmon report html file and the BSOD analysis in rar format The other info needed are Windows x The computer came with no OS installed The OS was burned to a DVD from an BSOD ntfs.sys and ntoskrnl.exe related image volume BSOD ntfs.sys and ntoskrnl.exe related licensed by my university October The computer was bought February February Yes the system was re-installed CPU Intel Core i Ghz Video Card NVidia GeForce M Ghz MotherBoard Lenovo Standard Power Supply Lenovo BSOD ntfs.sys and ntoskrnl.exe related Standard System Manufacturer Lenovo Model No Lenovo G

A:BSOD ntfs.sys and ntoskrnl.exe related

Bump


Quote:





Originally Posted by AdrianC


Hello all,

I'm new around here and I'm finding myself in the position to request your help for a problem.

My computer keeps crashing on me and the crashes seem to follow no apparent pattern. I tried reinstalling Windows twice (formatting the hard drive), my system and drivers are up to date, but the problem persists. After some digging around I found that it is ntfs.sys and ntoskrnl.exe related. This is what the minidump indicates when opened with BlueScreenView. I don't know what to do anymore.

Following the guidelines for BSOD posting I am attaching the perfmon /report html file and the BSOD analysis in rar format.

The other info needed are:

Windows 7
x64
The computer came with no OS installed
The OS was burned to a DVD from an image volume licensed by my university.
October 16, 2012. The computer was bought February 2013.
February 2013. Yes, the system was re-installed.

CPU: Intel Core i3, 2,2 Ghz
Video Card: NVidia GeForce 610M, 1Ghz
MotherBoard: Lenovo Standard
Power Supply: Lenovo Standard

System Manufacturer: Lenovo
Model No: : Lenovo G580

http://www.techsupportforum.com/forums/f299/bsod-ntfs-sys-and-ntoskrnl-exe-related-715409.html
Relevancy 69.66%

i keep getting bsods with diffrent titles (IRQL_NOT_LESS_OR_EQUAL, PAGE FAULT_IN_NONPAGES_AREA, ..... ) it happens 3-4 times a day and its really getting annoying
can u help me plz how to fix this problem ?
here are some dump files
ty

A:random BSOD related to ntoskrnl.exe

Hello phantomsa and welcome to Sevenforums.

To be able to help you, we'd need a full attachment in order for us to analyse your crash. The below link will guide you through some steps for catching these files. If you have any questions just ask us.

http://www.sevenforums.com/crashes-d...tructions.html

With that said, I'll look at the stand-alone dumps.

BSOD Analyse

ATI-driver was blamed. Do the below tutorial in order to achieve a clean install without leftover files of the driver.

i) Make your way to ATI Drivers - Downloads and download the latest driver for your card, save it to your desktop for instance
ii) Uninstall the Graphic driver you currently have and all its extensions (do not reboot yet)
iii) Download Driver Sweeper
iv) Get to safe mode (without network) and search for Driver Sweeper in your
v) Select all the ATI components and analyse them
vi) Clean them, head into Windows without internet and install the driver you've downloaded previously

Memtest86+

Looking at your bugcheck it's likely that a memory corruption event was triggered. Though a driver could be causing the memory to be borked, but we're usually suggesting a memory test before moving forward. Do a scan with Memtest86+. Memtest is a scanner that'll check your sticks for errors.



   Warning
Note that the below instructions may break your WARRANTY rules. If you're unsure check manuals, separated warranty papers, stickers on computer for secure permission.

To ensure that we'll know if it's the slots on the motherboard that's broken, or the sticks itself - we have a little procedure we'll recommend. Remove 1 stick, scan the other with Memtest in the current slot. After 7 passes, move the stick to another slot and scan, and so on and so forth until you've scanned all the sticks, and all the slots, one by one.

Memtest86+ - Advanced Memory Diagnostic Tool


Code:
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff1001673859c, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff88007864b95, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000007, (reserved)
Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/240483-random-bsod-related-ntoskrnl-exe.html
Relevancy 69.23%

Well didn't think i would be having any more issues pc been running fine since i fixed bad memory issues now all of a sudden i start getting this error ntoskrnl.exe+811b3 or that's all i can understand from log please if some 1 could take a look at my logs and help i would appreciate it i have stress tested my pc for a few hours after recovering last time and all seemed fine TIA

A:BSOD related to ntoskrnl.exe+811b3 after recovering from BSOD

Can i ask you to download this, http://go.microsoft.com/fwlink/?linkid=52012

Once downloaded please copy and past the information on here

This will help me analyze your problem further

I look forward to helping you.

http://www.sevenforums.com/bsod-help-support/346328-bsod-related-ntoskrnl-exe-811b3-after-recovering-bsod.html
Relevancy 69.23%

At my end here on this problem, our office admin came to me with this issue and I am about to pull my hair out. Here are the "Grab All" files from the tool that was available on the website here, dumps, sys. info, etc. If anyone out there can make sense of this, please let me know, thanks.

A:BSOD Error, Office Comp., Safe Mode is Fine, Multiple Errors

Welcome to Seven Forums.

Please complete the steps below:




Quote:
Based on the bugchecks, I would recommend you follow and complete the steps given below:1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a Hard Drive Diag.

9. Test and Diagnose RAM issues with RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

10. Monitor hardware temperature for overheating issues with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor



Follow:






  
Quote: Originally Posted by Arc


Get rid of intel rapid storage. Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "Disc Drives" by clicking on the triangle in front of it.
Select one item under it, right click, uninstall.
Continue the process for all items under "Disc Drives"
Now restart the computer. At restart, windows will auto configure the appropriate system driver, msahci.sys.

http://www.sevenforums.com/bsod-help-support/308263-bsod-error-office-comp-safe-mode-fine-multiple-errors.html
Relevancy 68.8%

Hi,

I recently began having BSODs when browsing the Internet, especially when running speed tests. I've tried reinstalling Windows, have ran Memtest86+ overnight with no errors, tried wired and wireless connections, and reinstalled/updated drivers. I tried reinstalling Windows again this morning and just got another BSOD.

http://www.sevenforums.com/bsod-help-support/388662-bsod-when-browsing-internet-related-ntoskrnl-exe.html
Relevancy 68.8%

Greetings all I usually find my way around PC issues but I'm about to lose hope with this one The laptop in question is a brand new Vaio Z Flip Have it for less than a week Model is i U GB RAM SSD ntoskrnl.exe BSOD's, / Random driver related? Some history long post might not be relevant skip to file below itc When I turned it on Win began updating immediately so I can't tell if BSOD's were there before The installs failed mid-way don't remember if it was Random BSOD's, ntoskrnl.exe / driver related? a BSOD or a freeze Ever since I started noticing random BSOD's usually of the types IRQL NOT Random BSOD's, ntoskrnl.exe / driver related? LESS OR EQUAL MEMORY MANAGEMENT SYSTEM THREAD EXCEPTION NOT HANDLED PFN LIST CORRUPT and some others which I can't recall wiped PC since of the errors listed ntoskrnl exe as the problem when examining with BlueScreenView I did a reset which also failed mid-way so the PC won't boot I re-installed Win using a USB with Media Creation Tool and then performed a reset inside Windows It succeeded but BSOD's were still there I re-installed again I then noticed same BSOD's despite no rd party drivers being installed except ones fetched automatically by Windows - I turned that off then I installed all rd party manually as given by Vaio here BSOD's were still there at random maybe less frequent Also tried Ran memtest a whole night for passes - no errors Performed built-in diagnostics sfc chkdisk etc sfc returned this Windows Resource Protection found corrupt files but was unable to fix some of them Details are included in the CBS Log For example C Windows Logs CBS CBS log Note that logging is currently not supported in offline servicing scenarios CBS log is attached below I used to get a BSOD when touching the PC after it'd been idle - I noticed it stops happening when I turned off quot Save me power when my device knows I'm away quot in settings Driver Verifier When I ran it the way instructed in MS forums checking all tests except two I would get a DRIVER VERIFIER DETECTED VIOLATION on boot with no dump generated I tested this with all non-MS drivers and also some individual drivers - most of them generated this error After that I ran the test as explained in this forum PC booted normally amp left running during the night The following morning I noticed it had a SYSTEM THREAD EXCEPTION NOT HANDLED with ntoskrnl exe storport sys All in all can't tell if it's a HW problem haven't crashed in safe mode yet Laptop is under warranty but Vaio have no reps in my country So I must make sure I'm dealing with HW issues before shipping internationally Thanks in advance

http://www.tenforums.com/bsod-crashes-debugging/64748-random-bsods-ntoskrnl-exe-driver-related.html
Relevancy 68.8%

Recently I began experiencing a frequent BSOD Error DRIVER POWER STATE FAILURE WhoCrashed says the following This program checks for drivers which have been crashing your computer If your computer has displayed a blue or black screen of death suddenly rebooted or shut down then this program will help you find the root cause and possibly a solution Whenever a computer suddenly reboots without displaying any notice BSOD ntkrnlmp.e Windows 10 related to ntoskrnl.exe, or blue or black screen of death the first thing that is often thought about Windows 10 BSOD related to ntoskrnl.exe, ntkrnlmp.e is a hardware failure In reality on Windows most crashes are caused by malfunctioning device drivers and kernel modules In case of a Windows 10 BSOD related to ntoskrnl.exe, ntkrnlmp.e kernel error many computers do not show a blue screen unless they are configured for this Instead these systems suddenly reboot without any notice Windows 10 BSOD related to ntoskrnl.exe, ntkrnlmp.e This program will analyze your crash dumps with the single click of a button It will tell you what drivers are likely to be responsible for crashing your computer It will report a conclusion which offers suggestions on how to proceed in any situation while the analysis report will display internet links which will help you further troubleshoot any detected problems To obtain technical support visit www resplendence com support Click here to check if you have the latest version or if an update is available Just click the Analyze button for a comprehensible report Home Edition Notice This version of WhoCrashed is free for use at home only If you would like to use this software at work or in a commercial environment you should get the professional edition of WhoCrashed which allows you to perform more thorough and detailed analysis It also offers a range of additional features such as remote analysis on remote directories and remote computers on the network Click here for more information on the professional edition Click here to buy the the professional edition of WhoCrashed System Information local Computer name DESKTOP-G JKG Q Windows version Windows build Windows dir C Windows Hardware All Series ASUS ASUSTeK COMPUTER INC X -DELUXE CPU GenuineIntel Intel R Core TM i - K CPU GHz Intel level logical processors active mask RAM bytes total Crash Dump Analysis Crash dump directory C Windows Minidump Crash dumps are enabled on your computer On Thu AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A B Bugcheck code x F x xFFFF B xFFFFDE D DCB xFFFF EAB Error DRIVER POWER STATE FAILURE file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Thu AM GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x F x xFFFF B xFFFFDE D DCB xFFFF EAB Error DRIVER POWER STATE FAILURE Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Wed AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A B Bugcheck code x F x xFFFF F BFFBE xFFFFF CB xFFFF F DB C Error DRIVER POWER STATE FAILURE file path C Win... Read more

http://www.tenforums.com/bsod-crashes-debugging/65291-windows-10-bsod-related-ntoskrnl-exe-ntkrnlmp-e.html
Relevancy 68.8%

i am having problems with bsods on my new pc i had problems with my gpu's drivers its solved now using an old beta driver now but still having bsods probably related with usbport sys ntoskrnl exe tunnel sys based on whocrashed reports usbport and ntoskrnl bsods are random but when it comes to tunnel sys i think its about vuze it always related usbport.sys ntoskrnl.exe bsod random appears when i m using vuze i also tried verifier and furmark i d appreciate any sort of help thank you all heres minidumps and whocrashed reports please random bsod usbport.sys ntoskrnl.exe related debug my minidumps for hidden drivers or sth maybe i am missing something can cause bsods Code System Information local -------------------------------------------------------------------------------- computer name SERDAR-PC windows version Windows Service Pack build windows dir random bsod usbport.sys ntoskrnl.exe related C Windows CPU GenuineIntel Intel R Core TM i - K CPU GHz Intel level logical processors active mask RAM total VM free -------------------------------------------------------------------------------- Crash Dump Analysis -------------------------------------------------------------------------------- Crash dump directory C Windows Minidump Crash dumps are enabled on your computer On Sat GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x F Bugcheck code x E x x x x Error KMODE EXCEPTION NOT HANDLED file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Sat GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module usbport sys USBPORT USBPORT RegisterUSBPortDriver x CE Bugcheck code x E x x x x Error KMODE EXCEPTION NOT HANDLED file path C Windows system drivers usbport sys product Microsoft Windows Operating System company Microsoft Corporation description USB amp Port Driver Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identified at this time On Sat GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x F Bugcheck code x E x x x x Error KMODE EXCEPTION NOT HANDLED file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that a kernel-mode program generated an exception which the error handler did not catch This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time On Sat GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module tunnel sys tunnel xD Bugcheck code x E xFFFFFFFFC xFFFFF AFE xFFFFF E F xFFFFF E Error SYSTEM THREAD EXCEPTION NOT HANDLED M file path C Windows system drivers tunnel sys product Microsoft Windows Operating System company Microsoft Corporation description Microsoft Tunnel Interface Driver Bug check description This indicates that a system thread gene... Read more

A:random bsod usbport.sys ntoskrnl.exe related

curautvaleas, you do some basic USB related troubleshooting. For the ports, first, uninstall and reinstall the USB ports drivers as follows.
Right click on Computer icon > manage. It will open the computer management window.
Click on "Device Manager" in the left pane, it will list all installed devices up.
Expand "USB Serial Bus Controllers" by clicking on the triangle in front of it.
Click on one item to select, then right click and uninstall.
Do the same for all.
Restart the computer.
At restart, windows will auto configure the appropriate drivers.
And, Disable USB Selective Suspense too.
USB Selective Suspend - Turn On or Off

For the devices, first, detach all the USB devices other than the keyboard and mouse.
Then, Update the drivers for them all, including the keyboard and mouse, if any third party drivers are installed for them.

Let us know the results.

http://www.sevenforums.com/bsod-help-support/275818-random-bsod-usbport-sys-ntoskrnl-exe-related.html
Relevancy 68.8%

I've been having BSODs ever since I did a system upgrade a few months back. I made the following upgrades:
- added 2 sticks of new RAM (Corsair xms3 8gb kit)
- added a new SSD (Intel SSDSC2BW180A3L)
- I also cloned my OS from my old drive to the SSD, don't know if that would cause problems
- overclocked my cpu to 3.2ghz from 2.67 (core i5-750)

The minidump files are attached. Grateful for any help! Thanks.

A:BSOD related to KMODE_EXCEPTION_NOT_HANDLED caused by ntoskrnl.exe

Scan the system for possible virus infection with these tools. It is needed.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Logitech SetPoint HID Filter Driver ia causing some problems here:

Code:
fffff880`02ffca78 fffff880`024bd595Unable to load image LHidFilt.Sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for LHidFilt.Sys
*** ERROR: Module load completed but symbols could not be loaded for LHidFilt.Sys
LHidFilt+0xc595
And the driver is very old.

Code:
fffff880`024b1000 fffff880`024c7000 LHidFilt T (no symbols)
Loaded symbol image file: LHidFilt.Sys
Image path: LHidFilt.Sys
Image name: LHidFilt.Sys
Timestamp: Fri Sep 02 11:53:09 2011 (4E60764D)
CheckSum: 0001071C
ImageSize: 00016000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Logitech - Support & Software Downloads

You are highly overclocked. No wonder that the graphics will crash, despite of having the latest driver.

Code:
CPUID: "Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 3202
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Also set the BIOS to default, too.
How To Clear CMOS (Reset BIOS)

Also, your BIOS is very old.

Code:
BiosVersion = 080016
BiosReleaseDate = 09/09/2009
If possible, try to update it from EVGA Download Center (Motherboard: EVGA P55 SLI E655)

Let us know the results. If it crashes again, next time upload your MSINFO32.nfo file, too.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
EDIT: If you are using Marvell's SCSI driver, uninstall it; and then follow Drivers - Clean Left over Files after Uninstalling

http://www.sevenforums.com/bsod-help-support/286133-bsod-related-kmode_exception_not_handled-caused-ntoskrnl-exe.html
Relevancy 68.8%

Hello,
I built a computer for a friend (8th one I've done for friends). None in the past have had problem. Now this one is blue screening (Same windows install). I used a windows debugger tool I got from a coworker and got the result BSOD.txt. My coworker told me to do a check disk in command prompt which I did and it found no bad sectors. So I re installed windows and that worked for a bit until he got another BSOD. The dumpnewer.txt is what I got the second time. Help would be appreciated. I would like to get this fixed quickly because his pet rabbit just died and now his computer is dying.
His specs: Intel Core i5-3470, PowerColor Radeon HD 7850, Rosewill BlackHawk - Ricky - SpyPossum's Saved Part List - PCPartPicker

I have been wondering if his hdd is bad

He can't even start his computer anymore. Will post updates

A:BSOD seemingly random related to ntoskrnl.exe

Did you follow all the instructions from the bsod posting rules?

Blue Screen of Death (BSOD) Posting Instructions

http://www.sevenforums.com/bsod-help-support/298341-bsod-seemingly-random-related-ntoskrnl-exe.html
Relevancy 68.8%

Hello,

I recently got a new graphics card, as well as upgrading my OS to windows ten.

However before and after these actions I receive various BSODs but only while playing Overwatch.

Looking into it they seem to be related to the ntoskrnl.exe process, but I may be wrong.

Here is the information requested:

DESKTOP-5LT1QD2-2016-10-09_154942_55.zip

http://www.tenforums.com/bsod-crashes-debugging/66485-bsod-playing-overwatch-ntoskrnl-related.html
Relevancy 68.8%

Hello there I'm the new one and here's my story Since I switched to the new Skylake plattform I've had multiple BSOD which all related to my memory ntoskrnl exe The memory BSOD Ntoskrnl.exe and related new with hardware system also worked poorly with a Ntoskrnl.exe and memory related BSOD with new hardware hz polling rate on my mouse every mouse movement would result in a massive FPS and GPU usage drop in many games With hz these problems didn't occur I've performed a fresh WIndows install and ran Memtest and chkdsk which didn't show any errors The mouse problem and the BSOD stayed The RAM analysis tool from Windows showed some errors so I first swapped out my RAM which didn't change a thing and after that my mainboard While my new mainboard was on it's way I switched to my old mainboard CPU and RAM and everything worked perfectly Now I've put in the new Hardware again and set up a dual boot with Win and Win Both versions worked fine at first even without that strage mouse polling rate problem Because I only have a key for Win I had to update the Win Ntoskrnl.exe and memory related BSOD with new hardware install to Win Trying this I already got two new ntoskrnl exe related BSOD so the core issue still seems to exist I simply can't pin down the problem with BlueScreenView and excessive googling and I'm overwhelmed by the windows debugging tool The whole situation is driving me crazy and I sincerely think that this forum could be my last hope Could someone please have a look at my file down below PANCAKE- zip Kind regards TheDestron PS My RAM is officially compatible with my mainboard and the problem exists with and without the new mainboard drivers and BIOS

A:Ntoskrnl.exe and memory related BSOD with new hardware

Hi TheDestron,

Welcome to the 8forums.

Unfortunately, I cannot really find a possible cause as a possible solution.
I do find lots of files dating from 2014 and earlier where some might need updating.
Please visit Windows Update and install every update available, it may take a couple of times to get them all.
Please remove Google Chrome while troubleshooting, Chrome lately causes for some people crashes.
Please update the device drivers as far as you can, via the site of the manufacturer of the driver. Do not update through device manager as you'll get always the message that the drivers are up to date.

I would like you to try driver verifier and run some hardware tests so we can get a lead to the cause.



Diagnostic Test

DRIVER VERIFIER

   Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.
Please follow this tutorial to run driver verifier.
Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.
Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.
If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

   Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.



Diagnostics Tests

Read carefully before proceeding.

   Warning
If you're overclocking your system, revert back to stock clocks now.

   Note
Test the system once the overclock is removed before continuing with the steps outlined below.
Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test


ONE

CPU TEST

Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 7 Help Forums
   Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.


TWO

RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Help Forums

   Note

MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


THREE

HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools - HDD test - Windows 7 Help Forums

   Note
Do not run SeaTools on an SSD as the results will be invalid.
Run chkdsk Chkdsk - HDD Test - Windows 7 Help Forums


FOUR

GPU TEST

Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 7 Help Forums

   Note
Run Furmark for around 30 minutes.
   Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.

http://www.eightforums.com/bsod-crashes-debugging/71591-ntoskrnl-exe-memory-related-bsod-new-hardware.html
Relevancy 68.8%

I have tried everything I could. I have consulted existing threads and found no solution suiting me.
I ran memtest overnight and there were no errors.

Chdisk and sfc scan did not help.

I've reinstalled Windows and yet the problem persists.
I am still hoping that it is not bad ram.

Driver verifier causes BSOD on restart if ntoskrnl.exe is selected.
Only way to get back into windows is to disable verifier from safe mode and restart.


Please help me out and thank you!

A:Win7 64-bit ntoskrnl.exe BSOD (Memory related)

Im sorry but the RAM sticks is the fault. Run Memtest86+.

Here is a guide for you! RAM - Test with Memtest86+

http://www.sevenforums.com/bsod-help-support/353602-win7-64-bit-ntoskrnl-exe-bsod-memory-related.html
Relevancy 68.8%

I've attached the SF Diagnostics report to this post.

Whenever I've tried to play a game in the past 2 days, the game will rapidly slow and lag, then the PC will restart itself and it only gave one error report, now it has since stopped giving error reports. I've searched all over but I still have no idea how to eliminate this issue.

I've tried removing Kernel Labs software (as suggested in a post for Win 7), but to no avail, as I have never even installed anything by KL.

A:BSOD/Auto-Restart, seems to be related to ntoskrnl.exe

This device is disabled. Is this deliberate? If so, why?





Cisco AnyConnect Secure Mobility Client Virtual Miniport Adapter for Windows x64 ROOT\NET\0001 This device is disabled.



Please enable the device and update it. Feel free to disable it again once it's been updated.

All 3 of the memory dumps blame your nVidia video drivers.
Please try these troubleshooting steps: Video TDR Timeout - 0x116 + 0x117 - Sysnative Forums

If you'll note the first memory dump, it blames "hardware". As such, please try these free diagnostics (especially the video tests): Hardware Diagnostics

Please remove LogMeIn/Hamchi from the system. It dates from 2007 and likely isn't compatible w/Win8

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

NTIOLib_X64.sys Sun Jan 17 21:31:59 2010 (4B53C81F)
MSI Afterburner driver (known BSOD issues with Windows) Also found to be a part of MSI Live Update 5
http://www.carrona.org/drivers/driver.php?id=NTIOLib_X64.sys

CLVirtualDrive.sys Mon Dec 26 08:26:47 2011 (4EF87617)
CyberLink Virtual Device Driver
http://www.carrona.org/drivers/driver.php?id=CLVirtualDrive.sys

Analysis:
The following is for informational purposes only.

Code:
**************************Mon Aug 12 20:34:37.725 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\081213-16250-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 0:05:11.436
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by :hardware ( dxgkrnl!DpSynchronizeExecution+ac )
BugCheck A, {0, 7, 1, fffff801aac9c8d3}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000007, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff801aac9c8d3, address which referenced memory
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: IP_MISALIGNED
CPUID: "Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz"
MaxSpeed: 3000
CurrentSpeed: 2993
BIOS Version A08
BIOS Release Date 08/16/2012
Manufacturer Alienware
Product Name Alienware X51
??????????????????????????????????????????????????????????????????????????????????????``
**************************Mon Aug 12 20:29:01.204 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\081213-16125-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 0:05:56.912
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by :nvlddmkm.sys ( nvlddmkm+d1ca7 )
BugCheck D1, {fffff8881a3bcff8, 2, 1, fffff880042dfca7}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Arguments:
Arg1: fffff8881a3bcff8, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff880042dfca7, address which referenced memory
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: AV_nvlddmkm+d1ca7
CPUID: "Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz"
MaxSpeed: 3000
CurrentSpeed: 2993
BIOS Version A08
BIOS Release Date 08/1... Read more

http://www.eightforums.com/bsod-crashes-debugging/29682-bsod-auto-restart-seems-related-ntoskrnl-exe.html
Relevancy 68.37%

Information regarding my laptop HP Pavilion m Notebook PC Intel COre i - QM GHZ Windows Home Premium Service Pack GB RAM -bit Operating System Over the past Multiple issues Update Error Windows including Errors, Center Security BSOD, four months Multiple issues including BSOD, Windows Update Errors, Security Center Error there has been numerous issues with my laptop These issues include BSOD that have errors - Event Tracing Subsystem Failure amp Driver IRQL not less or equal As of this current post Action Center displays the error -Turn On Windows Security Center Clicking on the message error turns the lettering grey and a clock is displayed but security center remains disabled Turning on Security Center through services msc fails and displays error message The service module could not be found Windows update is displaying an optional update that fails every time I try to update The update Intel Corporation - Graphics Adapter WDDM WDDM WDDM - Intel reg HD Graphics I am currently running Antimalware which has detected two errors Trace Registry Settings DisableTaskMgr A Trace Registry Settings DisableRegistryTools A I Multiple issues including BSOD, Windows Update Errors, Security Center Error have read several other forum posts to compare my laptop to similar issues but everything I have done in the past has been unsuccessful My laptop will run good for a week but randomly will receive Multiple issues including BSOD, Windows Update Errors, Security Center Error a BSOD then continue to run sluggish and choppy I have wanted to post to the forum for a long time but never thought my laptop would get to this point where I am worried that all of my financial and secure data has been compromised Please Advise

A:Multiple issues including BSOD, Windows Update Errors, Security Center Error

Welcome aboard   Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.* If an update is found, it will download and install the latest version.* Once the program has loaded, select Perform quick scan, then click Scan.* When the scan is complete, click OK, then Show Results to view the results.* Be sure that everything is checked, and click Remove Selected.* When completed, a log will open in Notepad.* Post the log back here.Be sure to restart the computer.The log can also be found here:C:\Documents and Settings\Username\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\Logs\log-date.txtOr at C:\Program Files\Malwarebytes' Anti-Malware\Logs\log-date.txtDownload Malwarebytes Anti-Rootkit from HERE to your Desktop.Unzip downloaded file.Open the folder where the contents were unzipped and run mbar.exeFollow the instructions in the wizard to update and allow the program to scan your computer for threats.DO NOT click on the Cleanup button. Simply exit the program.When done, please post the two logs produced they will be in the MBAR folder..... mbar-log-xxxxx.txt and system-log.txt Please download Rkill (courtesy of BleepingComputer.com) to your desktop.There are 2 different versions. If one of them won't run then download and try to run the other one.You only need to get one of these to run, not all of them. You may get warnings from your antivirus about this tool, ignore them or shutdown your antivirus.rKill.exe: http://www.bleepingcomputer.com/download/rkill/dl/10/iExplore.exe (renamed rKill.exe): http://www.bleepingcomputer.com/download/rkill/dl/11/Double-click on the Rkill desktop icon to run the tool.If using Vista or Windows 7 right-click on it and choose Run As Administrator.A black DOS box will briefly flash and then disappear. This is normal and indicates the tool ran successfully.If not, delete the file, then download and use the one provided in Link 2.Do not reboot until instructed.If the tool does not run from any of the links provided, please let me know.If normal mode still doesn't work, run the tool from safe mode.When the scan is done Notepad will open with rKill log.Post it in your next reply.NOTE. rKill.txt log will also be present on your desktop.NOTE Do NOT wrap your logs in "quote" or "code" brackets. Do NOT use spoilers.

http://www.bleepingcomputer.com/forums/t/525755/multiple-issues-including-bsod-windows-update-errors-security-center-error/
Relevancy 68.37%

Hi,
1st i dont have good skills in computer.
I've tried memtest and pass all of it.
i also tried with driver verifier, after disable all execpt microsoft's drivers, i reboot the pc and it went straight to BSOD and said something like IO manager has prevented the corruped driver or something .
thank you.

Relevancy 68.37%

I built a PC for my Dad and get daily BSOD. Cannot find the source.
Windows 7
- x64
- Is theoriginal installed OS on the system. I installed in on an all new system
- Is full retail version

- What is the age of system (hardware) - ~ 1year
- What is the age of OS installation- Did full reinstall. OS reinstalled about 1 month ago.

Can anyone help?

A:Frequent BSOD Crashes related to ntoskrnl and NTFS.sys

These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.


Driver Verifier - Enable and Disable
Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

One thing that needs to be removed is this driver. Related to SCMNdisP.sys NDIS User mode I/O Driver from Windows (R) Codename Longhorn DDK provider

http://www.sevenforums.com/bsod-help-support/208567-frequent-bsod-crashes-related-ntoskrnl-ntfs-sys.html
Relevancy 68.37%

I recently built a computer and am getting BSOD's on a relatively frequent basis After checking around I have no idea what the problem could be This is the first build I have ever done Here is what I know Using WhoCrashed it tells me built new on computer. to custom BSOD ntoskrnl.exe Related that in crashes it was related to ntoskrnl exe and in the th is BSOD on new custom built computer. Related to ntoskrnl.exe was related to ntkrnlmp exe The BSOD's are not recurring that is I will get one then go back and do the same thing I was doing before and it will be fine About a day after installing everything my integrated wi-fi card stopped working I shrugged it off to a faulty antennae and went and got a Netgear WNDA v Wireless dual band adapter it is faster and holds a signal better anyways Not sure if it is related to the BSOD's Any other questions feel free to ask attached are the dump files and system health report as required by the forum as well as the screen shot of the WhoCrashed report For system specs look at my profile or feel free to ask Thanks EDIT Also forgot to BSOD on new custom built computer. Related to ntoskrnl.exe add that I am running Windows -bit and it is an OEM everything was installed in the past - days when I took them out of the box and this is the only OS I have installed on the system Also I tried to run the windows repair program of the OS disc and it was not compatible not sure if that is due to OEM or related to the problem

A:BSOD on new custom built computer. Related to ntoskrnl.exe

PROBLEM DEVICES

Code:
Atheros AR9485 Wireless Network Adapter PCI\VEN_168C&DEV_0032&SUBSYS_850D1043&REV_01\4&299066B9&0&00E6 This device is disabled.
PCI Simple Communications Controller PCI\VEN_8086&DEV_1E3A&SUBSYS_84CA1043&REV_04\3&11583659&0&B0 The drivers for this device are not installed.
You will either need to uninstall these drivers and then install the latest version or perform a clean installation of them.
DRIVERS
The following drivers need to be updated:


Code:
hamachi.sys Thu Feb 19 21:36:41 2009
These drivers can be found by searching them in Google and then finding the associated software or driver. Finally, find the latest version of this driver or software and download and install it. Some of the drivers may also be found here (if the driver says 'Windows Update' simply make sure all Windows Updates are installed).

You should also update any other drivers you can think of including graphics, audio, chipset, SSD etc.
SOFTWARE
You have Norton installed, is that correct? At least to test, uninstall it and install MSE (Microsoft Security Essentials) instead.
Microsoft Security Essentials - Free Antivirus for Windows

Please also uninstall any other Symantec products you have including Endpoint and Ghost as some of your dumps point toward Symantec drivers.
HARDWARE
Run a chkdsk on the system partition to check for bad sectors or system errors.
Disk Check

http://www.sevenforums.com/bsod-help-support/239540-bsod-new-custom-built-computer-related-ntoskrnl-exe.html
Relevancy 68.37%

Recently I began experiencing a frequent BSOD SPAM ntkrnlmp.e to Windows BSOD related 10 ntoskrnl.exe, Error DRIVER POWER STATE FAILURE WhoCrashed says the following This program checks for drivers which SPAM Windows 10 BSOD related to ntoskrnl.exe, ntkrnlmp.e have been crashing your computer If your computer has displayed a blue or black screen of death SPAM Windows 10 BSOD related to ntoskrnl.exe, ntkrnlmp.e suddenly rebooted or shut down then this program will help you find the root cause and possibly a solution Whenever a computer suddenly reboots without displaying any notice or blue or black screen of death the first thing that is often thought about is a hardware failure In reality on Windows most crashes are caused by malfunctioning device drivers and kernel modules In case of a kernel error many computers do not show a blue screen unless they are configured for this Instead these systems suddenly reboot without any notice This program will analyze your crash dumps with the single click of a button It will tell you what drivers are likely to be responsible for crashing your computer It will report a conclusion which offers suggestions on how to proceed in any situation while the analysis report will display internet links which will help you further troubleshoot any detected problems To obtain technical support visit www resplendence com support Click here to check if you have the latest version or if an update is available Just click the Analyze button for a comprehensible report Home Edition Notice This version of WhoCrashed is free for use at home only If you would like to use this software at work or in a commercial environment you should get the professional edition of WhoCrashed which allows you to perform more thorough and detailed analysis It also offers a range of additional features such as remote analysis on remote directories and remote computers on the network Click here for more information on the professional edition Click here to buy the the professional edition of WhoCrashed System Information local Computer name DESKTOP-G JKG Q Windows version Windows build Windows dir C Windows Hardware All Series ASUS ASUSTeK COMPUTER INC X -DELUXE CPU GenuineIntel Intel R Core TM i - K CPU GHz Intel level logical processors active mask RAM bytes total Crash Dump Analysis Crash dump directory C Windows Minidump Crash dumps are enabled on your computer On Thu AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A B Bugcheck code x F x xFFFF B xFFFFDE D DCB xFFFF EAB Error DRIVER POWER STATE FAILURE file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Thu AM GMT your computer crashed crash dump file C Windows memory dmp This was probably caused by the following module ntkrnlmp exe nt KeBugCheckEx x Bugcheck code x F x xFFFF B xFFFFDE D DCB xFFFF EAB Error DRIVER POWER STATE FAILURE Bug check description This bug check indicates that the driver is in an inconsistent or invalid power state This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver that cannot be identified at this time On Wed AM GMT your computer crashed crash dump file C Windows Minidump - - dmp This was probably caused by the following module ntoskrnl exe nt x A B Bugcheck code x F x xFFFF F BFFBE xFFFFF CB xFFFF F DB C Error DRIVER POWER STATE FAILURE file path C Windows system ntoskrnl exe product M... Read more

http://www.tenforums.com/bsod-crashes-debugging/65291-spam-windows-10-bsod-related-ntoskrnl-exe-ntkrnlmp-e.html
Relevancy 68.37%

Crash dumps below post Just a few days and ntoskrnl.exe(memory_management, win32k.sys BSOD IRQL) with related ago i installed Windows x ultimate BSOD related with win32k.sys and ntoskrnl.exe(memory_management, IRQL) on my new machine as so far i'm sure this is RAM or Windows related Prime ran gb of RAM with no crashes but then at full load RAM it crashes after min i'm running XMP Mhz on Corsair memorys system setup Intel HD Fractal Design Define r Cooler Master Hyper Evo k Asus Z V-Pro Corsair GB Vengeance cml gx m a c Vengeance Low Profile Corsair Gaming Series W So far testing Memtest Randomly freezing even with legacy usb disabled runs pass then freezes before that it did freeze randomly Prime Stable CPU but not at RAM - gt Random BSODs even when barely ANY Ram is in use and the computer is Idle not gaming related but occurs more when gaming or RAM dependant even though it's GB BIOS - gt Nothing changed except XMP enabled and usb legacy boost Fans Voltage Auto on everything Can be related but not Sure i want some confirmation but i've heard since i'm using ALL ram ports it can need more voltage About the blue screen errors how should i post them here The errors are basically Memory Management and IRQL NOT LESS OR EQUAL with the problem occuring at ntoskrnl exe f c times win k sys cda a AND b times total Bios is Updated to latest version still same problem occured

A:BSOD related with win32k.sys and ntoskrnl.exe(memory_management, IRQL)

I would actually suggest turning xmp back off and seeing if the problem abates.
I would also check motherboard manufacturer for bios updates that pertain to XMP or memory compatibility.

http://www.sevenforums.com/bsod-help-support/246565-bsod-related-win32k-sys-ntoskrnl-exe-memory_management-irql.html
Relevancy 68.37%

Hello guys,
My laptop constantly have BSOD.
After tonnes of checking, I realize it should be related to my graphics card.
However, I have done all the updates to it and still, BSOD happens.
I really need some help here since its very annoying, thank you very much.
Laptop: Acer Aspire v3 772g
CPU: i7-4702mq
Graphics: nvidia gtx 760m
dmp files: https://onedrive.live.com/#cid=6CC67...8D5062BB%21864

A:BSOD related to ntoskrnl.exe(mini dmp files attached)

Follow the instructions here> http://www.techsupportforum.com/foru...ta-452654.html
Lets see if the BSOD dump file(s) can tell us whats going on.

http://www.techsupportforum.com/forums/f299/bsod-related-to-ntoskrnl-exe-mini-dmp-files-attached-815402.html
Relevancy 68.37%

My computer, since I built it around 6 months ago, has been constantly crashing, 1-3 times per day. I have tried re-seating the ram modules and graphics card, and reinstalling windows 8. On the current install I have installed no third party drivers, and left everything to windows update. My computer is fully updated.

Please help!

A:BSOD everyday related to ntfs.sys ntoskrnl.exe win32k.sys

Your Intel Management Engine Interface driver is from july 2012 and predates windows 8
HECIx64 fffff800`a0bd0000 fffff800`a0be3000 Tue Jul 03 00:14:58 2012 (4ff21d62) 00015752 HECIx64.sys
Please update from the supportpage of your mainboard from here GIGABYTE - Moederbord - Socket 1155 - GA-H77N-WIFI (rev. 1.0).

Advice: please also check/update all your other drivers/utilities etc. from the above page.

http://www.eightforums.com/bsod-crashes-debugging/49907-bsod-everyday-related-ntfs-sys-ntoskrnl-exe-win32k-sys.html
Relevancy 68.37%

I get this BSOD every 3 days or so, and when I run WhoCrashed it claims that it is related to the two files mentioned in the title which are apparently driver issues, but all of my drivers are up to date so I really don't know where to start. I don't believe that it's a problem with the memory, as these aren't hardware issues according to the software I used to identify them, they're driver issues, and I recently replaced old faulty memory with working memory that has passed 8 times in MemTest86+ just a few days ago. The actual error messages vary all of the time, the only two I took note of were IRQL_NOT_LESS_OR_EQUAL and MEMORY_MANAGEMENT.

Thanks in advance,
Callum.

A:Random Driver Related BSOD (ntoskrnl.exe and ntfs.sys)

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/285430-random-driver-related-bsod-ntoskrnl-exe-ntfs-sys.html
Relevancy 67.51%

Hi guys,

This is my first time posting on a forum like this so go easy!

I'm having issues with my Windows 7 Ultimate 64 bit PC. Every so often it will just BSOD on me. I've had a look at the errors and it mentions MEMORY_MANAGEMENT and ntoskrnl.exe, but i don't really know what i'm doing so i figured i'd get some REAL help. I've recently installed new graphic drivers, hoping that might help but it just crashed on me again.

Windows was pre installed on the machine and the machine itself is only a year old.

I'll attach the zip file with everything as mentioned in the BSOD post and we'll see how we go.

Thanks in advance!

A:Constant random BSOD, related to ntoskrnl and MEMORY MANAGEMENT

Related to MOBK.sys Change Monitor Filter Driver from Mozy, Inc. Yours from 2009. I would update to current or remove.

http://www.sevenforums.com/bsod-help-support/230127-constant-random-bsod-related-ntoskrnl-memory-management.html
Relevancy 67.51%

Hello usually I can google-fu this but I'm stumped I've been getting BSODs a good part of today and sometimes the computer will just restart itself without a BSOD as if someone scans to While watching ntoskrnl? Malware BSOD videos related or tripped the power cord Earlier today it was happening as I was watching BSOD While watching videos or Malware scans related to ntoskrnl? videos I downloaded the night before Thought it might be that specific video file Tried another video with the same results Tried to watch an old video I rendered years ago different file format codec and got the BSOD I can't pinpoint what is exactly causing it No new software or hardware was installed lately Poked around here and just installed SUPERAntiSpyware to see if it'll help The computer BSODs during each scan but nothing shows up as being detected as of yet It BSODs in safe mode as well Ran sfc a few times as well I'm getting different Bug Check Strings each time even when doing the same activity Any help BSOD While watching videos or Malware scans related to ntoskrnl? would be awesome Thanks in advance Windows Ultimate bit Clean install less than a year old year old machine no hardware upgrades in the past - years Intel P GHz GB DDR Mushkin RAM ATI Radeon X XL SATA HDDs

A:BSOD While watching videos or Malware scans related to ntoskrnl?

Security Software: ??? Make sure to install security software. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.

Search and Destroy is not the best anti-malware program and should probably be replaced with Malwarebytes. Neither anti-malware software nor SuperAntiSpyware will provide realtime protection from all threats. SuperAntiSpyware is a good program, though. Keep it for standalone scans.
Crashes indicate hardware problems. I note that your hardware is a bit old; how long have you had Windows 7 installed without problems?
Due to the age of the hardware, I suspect either an issue related to dust build-up or some hardware failure.To remove dust, follow the subsequent general procedure. If you have a desktop bought from Dell, HP, Sony, Lenovo, etc. make sure removing the desktop casing will not void your warranty first. Call the company if you are still under warranty and ask if it is okay to remove the casing and blow dust out. The procedure described is fine for laptops; just make sure no stickers are on panels saying if you remove the panel it will void the warranty. Shut down and turn off your computer.
Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
Remove the casing for a desktop, or remove any screwed on panels and disc drives for laptops.
Blow out the dust inside by using a can of compressed air or a low pressure compressor. You will want to put the computer on a desk or table so you can maintain the can in an upright position if using a can of air. Blow into all crevices on the motherboard, heat sinks, cards, modules, etc. for a desktop. Blow into vents, opened panels, disc drive areas, USB ports, and the keyboard if it is a laptop. You may also want to blow inside the disc drive by replacing the drive to the laptop, starting the computer, opening the drive, and then turning off the computer and removing all power as described above including the 30 second power button step. For a desktop, you may also want to blow inside the disc drive by starting the computer, opening the drive, and then turning off the computer and removing all power as described above including the 30 second power button step.
Replace casing for the desktop. Replace panels and disc drive (if you have not already done so) for the laptop.
Plug power supplies in. AC adapter for the desktop. Battery and then AC Adapter for the laptop.
Start the computer and see if performance is better.

Run some hardware checks.If you are overclocking any hardware, please stop.

If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Run all but the advanced tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
Monitor temperatures during the following tests. Use the following programs to monitor the temperatures. Real Temp is a good CPU temperature monitor.
Speccy - System Information - Free Download will monitor all hardware temperatures.
HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU... Read more

http://www.sevenforums.com/bsod-help-support/235774-bsod-while-watching-videos-malware-scans-related-ntoskrnl.html
Relevancy 67.51%

Hi new member here I thought this sleep ntoskrnl.exe+142940 Possibly - 0x00000119 to BSOD related looks like the place to try and get over a annoying problem Every or days intermittently I am getting a BSOD it usually happens when my PC wakes up from sleep but I can't repeat it I have tried manually sleeping my PC then waking it then sleeping and waking etc but it just happens so intermittently I followed the sticky here to generate my report 0x00000119 ntoskrnl.exe+142940 BSOD - Possibly related to sleep I have been using bluescreenview to try and pinpoint the problem and the error module seems always to be ntoskrnl exe At this point I feel like if the error happened within a couple of minutes rather than a couple of days it would be far easier to get to the bottom of but I just want my PC to be stable You will probably see I am overclocking my CPU from my report and I understand for troubleshooting purposes I need to turn this off Other things I have tried include running memtest for hours no errors and running driver verifier Driver verifier caused BSOD on my Samsung SSD driver I think SamsungRapidSvc I think before the pc even booted and just stuck there so I couldn't get to the memory dump to attach here I have updated on windows update and also made sure I have the latest Samsung magician SSD firmware etc I own a EVO I am not sure if I am facing multiple problems here before when I have had sleep issues it has usually pointed to the GPU but ntoskrnl suggests something else as does running driver verifier Any help is much appreciated Thanks in advance Dodge BEAST- zip

http://www.tenforums.com/bsod-crashes-debugging/59863-0x00000119-ntoskrnl-exe-142940-bsod-possibly-related-sleep.html
Relevancy 66.65%

I was playing CS:GO as usual, and for the first time (that I noticed) I got this BSOD IRQL_NOT_LESS_OR_EQUAL while playing the game, it hadn't happened before so I thought it was just a one time thing and as soon as the computer restarted I jumped into the game, just to get the same BSOD a few seconds later, and, it kept happening afterwards.

Checking it with BlueScreenView I've noticed that before the few that the BSOD was related to ntoskrnl.exe and it HAS happened before, two times, once 2 months ago and the other time 3 months ago, even though

I don't remember it happening while playing CS:GO and only today I got it to occur 4 times in a short spam of time, always in the game.

Others BSOD occurred when using driver verifier and rebooting

http://www.tenforums.com/bsod-crashes-debugging/57579-bsod-playing-counter-strike-global-offensive-related-ntoskrnl-exe.html
Relevancy 66.22%

View attachment View attachment View attachment View attachment View attachment errors Many BSOD bug related I have so many bugs that it s not funny and this is even after re-installing XP and above is just of the minidumps and the rest are on the second comment System Pentium MHz Windows XP Home Edition Version service pack NVIDIA Graphics card gb RAM gb Hardrive I have had my computer for a while and working fine One day my computer started restarting automatically when playing high graphic games or doing multimedia so I re-installed the computer but still the things happened I haven t checked hardware yet with functionality or dust but I am in the process I Many bug BSOD related errors have no tweaked settings such as overclocking and I have no options in removing caching or shadowing in the BIOS To view the bug number I set my system recovery to not restart so the blue screen of death appears I have updated all my hardware to the latest drivers I have not had because Microsoft suggests that there can be a related errors to this with hardware I have tried many stuff on the web and nothing has fixed this Anti-virus software can be a cause of this but disabling it has made no difference and it is the latest version of the legal Trend Micro Crashes also when playing UT I have also run Chkdsk f r on command prompt and the windows ram test and they have shown that the RAM and NTFS system is fine I have not checked the temperature of my CPU and Graphics card because I need suggestions on the right software to use to check this and I have tried RAM testing software and everything has been fine This weekend I will re-install my computer from scratch so I can try any suggestions Bugs x e xc xf b a xba fa x x x x f d x f f x ad The browser has forced an election on network Device NetBT Tcpip EFBFE - - B- E - B FB E F because a master browser was stopped Sourced from event viewer and I use the latest version of Mozilla Firefox Error code parameter parameter f d parameter f f parameter ad Sourced from event viewer think this happened when playing Warcraft III System Information CONFLICTS SHARING I O Port x - x F PCI bus I O Port x - x F Direct memory access controller I O Port x C - x DF SIS Processor to AGP Controller I O Port x C - x DF NVIDIA GeForce IRQ Microsoft ACPI-Compliant System IRQ SCSI RAID Host Controller Memory Address xD - xDFFFFFFF SIS Processor to AGP Controller Memory Address xD - xDFFFFFFF NVIDIA GeForce Memory Address xE - xE FFFFFF SIS Processor to AGP Controller Memory Address xE - xE FFFFFF NVIDIA GeForce Memory Address xA - xBFFFF PCI bus Memory Address xA - xBFFFF SIS Processor to AGP Controller Memory Address xA - xBFFFF NVIDIA GeForce I O Port x B - x BB SIS Processor to AGP Controller I O Port x B - x BB NVIDIA GeForce I O x - x F PCI bus OK x - x F Direct memory access controller OK x - x F Motherboard resources OK x - x Programmable interrupt controller OK x - x F Motherboard resources OK x - x System timer OK x - x F Motherboard resources OK x - x Standard -Key or Microsoft Natural PS Keyboard OK x - x System speaker OK x - x Motherboard resources OK x - x Standard -Key or Microsoft Natural PS Keyboard OK x - x F Motherboard resources OK x - x System CMOS real time clock OK x - x F Motherboard resources OK x - x Direct memory access controller OK x - x Motherboard resources OK x - x F Direct memory access controller OK x A - x A Programmable interrupt controller OK x A - x BF Motherboard resources OK x C - x DF Direct memory access controller OK x E - x EF Motherboard resources OK x F - x FF Numeric data processor OK x - x Secondary IDE Channel OK x F - x F Primary IDE Channel OK x - x Standard Game Port OK x - x Standard Game Port OK x - x ISAPNP Read Data Port OK x - x ISAPNP Read Data Port OK x - x Motherboard resources OK x F - x FF Communications Port COM OK x - x MPU- Compatible MIDI Device OK x - x Secondary IDE Channel OK x - x F ECP Printer Port LPT OK x B - x BB SIS Processor to AGP Controller O... Read more

A:Many bug BSOD related errors

Try reloading your SIS motherboard drivers from the motherboard manufacturer's support website
 

http://www.techspot.com/community/topics/many-bug-bsod-related-errors.114102/
Relevancy 65.36%

Hey guys so I've been getting some random BSOD errors every few days or so I usually leave my computer on when I am at work or sleep and either when I come home Random BSOD error ntoskrnl.exe (address driver ntoskrnl.exe+74ec0) or wake up my computer is off So I turn it on and it says that the computer didn't Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) shut down properly when I start up I downloaded the BlueScreenView and noticed I've had some BSOD three times within days One Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0) was a PAGE FAULT IN NONPAGED AREA error which I believe was a RAM problem i bought new RAM and installed it plus OCed it to but I believe it was making my system unstable so I reset the speed to default and haven't gotten that error again but after that I've gotten two IRQL NOT LESS OR EQUAL errors related to ntoskrnl exe I did some research online and from what I read it could be a number of problems I'm just not sure where to start and could really use some guidance and advice I uploaded my dmp files for anyone who knows how to look at these Thank in advance

A:Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)

Welcome to 7F. I'll take a look at your dumps and see if I can get you BSOD free.


One

 NETGEAR NEUTRAL WIRELESS SOLUTION

Your Netgear Neutral Wireless Solution driver has been flagged. It is quite old a could probably do with updating. Check for updates here
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff800034c88ac}

*** WARNING: Unable to verify timestamp for scmndisp.sys
*** ERROR: Module load completed but symbols could not be loaded for scmndisp.sys
Probably caused by : scmndisp.sys ( scmndisp+16d1 )

Followup: MachineOwner
---------

1: kd> lmvm scmndisp
start end module name
fffff880`0188b000 fffff880`01895000 scmndisp T (no symbols)
Loaded symbol image file: scmndisp.sys
Image path: \SystemRoot\system32\DRIVERS\scmndisp.sys
Image name: scmndisp.sys
Timestamp: Fri May 27 11:30:22 2011 (4DDF7D3E)
CheckSum: 00009C0C
ImageSize: 0000A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Two

 HARDWARE DIAGNOSTICS

A few of your dumps (0x50, 0x124) are pointing towards hardware errors. 0x124s are usually always hardware errors but rarely give us an indication of what the problem actually is. In this case we may have struck lucky as this particular one shows up ASUS AI Suite III. The utilities listed below are the ones I'm concerned about.Attachment 353971


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800752d028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000bf800000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000124, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

PROCESS_NAME: AISuite3.exe

CURRENT_IRQL: f

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
We have seen motherboard packaged utilities cause 0x124s in the past and it could be the case here.
Uninstall ASUS AI Suite III and test the system for stability.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use
Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+


   Note
Attachment 353972 Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Three

 NVIDIA GPU

You've also received a 0x116 which is a VIDEO_TDR_ERROR (Timeout Detection & Recovery) which means your GPU driver has crashed and has failed to recover in time. This could be down to the driver, the card itself or possibly the power to the card.
Code:
******************************************************************************... Read more

http://www.sevenforums.com/bsod-help-support/365399-random-bsod-error-driver-ntoskrnl-exe-address-ntoskrnl-exe-74ec0.html
Relevancy 65.36%

Multiple BSODs over the last year, sometimes while logging in, sometimes after 15 minutes of running. Have tried SFC/SCANNOW, memory test, CHKDSK, all with no reported errors. Did a system restore to Windows 8 a while back and kept getting BSODs. Could it be a hard drive problem, or a simple drive upgrade? Im currently working on trying to update all my drivers to see if that will fix it. All help is appreciated.

A:Multiple BSOD errors from multiple drivers, no luck fixing so far

Oh and I replaced the RAM and was still getting BSODs so I put my factory ones back in.

http://www.tenforums.com/bsod-crashes-debugging/66920-multiple-bsod-errors-multiple-drivers-no-luck-fixing-so-far.html
Relevancy 65.36%

Hello, a little history about my problem, i was using a Nvidia GPU working with MS standard AHCI, then i changed to AMD GPU and after installation it keep giving warnings in Windows Event Log related to disk/eventID 153. So i decided to install intel ahci driver to test and installed their storage software, the windows event log reports about disk finished.
 
But then rare random blue screen freezes started to happen sometimes with images similar to this http://i.imgur.com/QsG7rqg.jpg and then finally a normal bsod happened which created a dump file.
 
I reinstalled Nvidia card/drivers and system worked without problems.

http://www.bleepingcomputer.com/forums/t/601392/bsoderrors-related-to-gpu-drivers/
Relevancy 65.36%

Hey Guys I keep having BSOD's I did a upgrade from win to then I changed hardware in the comp so I Pool Errors BSOD Ram? Related Bad was getting lots of BSOD's I changed CPU motherboard and ram I did a bit BSOD Pool Related Errors Bad Ram? of investigative work and found some drivers to be causing them so I did a clean reinstall of windows and it got rid of most of my problems Now however I use XBMC for my frontend as this build is an HTPC and if I alt tab out of xbmc to do something else chances are good that I'll get a BSOD Its about a in chance it'll BSOD It's almost always bad pool header or some kind of 'pool' problem I've also noticed in my bios it says I have gb of ram however in windows it says I have I'm wondering if it's a ram problem I've run memtest for about minutes no errors I know thats not long enough I'll run longer later Also memtest doesnt immediately see my second stick it takes about - seconds before it see's the second one is that normal I can post crashdumps let me know if you need me to and what ones to post Also CPU-Z says I have GB single channel windows system settings says GB

A:BSOD Pool Related Errors Bad Ram?

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions Please use Option 1 as it provides Event Viewer logs.

http://www.eightforums.com/bsod-crashes-debugging/45535-bsod-pool-related-errors-bad-ram.html
Relevancy 65.36%

OS other and errors BSoD related possibly - Vista computer's original OS x Not sure BSoD and other possibly related errors as to OEM or not as it was not originally my BSoD and other possibly related errors machine It was bought from a computer store and it was probably installed by them Its not a Dell etc System originally bought in late PSU replaced early this year RAM and GPU replaced last week BSoD and other possibly related errors Not sure It has almost certainly been reinstalled at some point probably by me Likely - months ago CPU - AMD Athlon X Dual Core Processor GHZ Video Card - NVIDIA GeForce GT MotherBoard - System Model GA-MA X-DS BIOS Award Modular BIOS v PG AMD x Power Supply - Corsair tx watt RAM GB x Corsair XMS Main problem BSoDs generally happen after usage for a while and seem less likely though not entirely absent if I leave it idle Programs especially more animated ones games videos large webpages are prone to crashing Internet browsers and my wireless internet connection are also prone to crashing Generally though not necessarily programs will crash more and more consistently and then it will blue screen History GPU and RAM had both failed preventing my PC from even booting but these were replaced Since then I have had this problem I have tried tests of Memtest and one test of Windows Memory Diagnostic I have done chkdsk I have done full system virus scan I have tried updating the graphics card drivers None of these showed fixed anything Other info There are small graphical errors such as when moving a file on the desktop a slightly ghostly version will remain where it used to be until I highlight the area around it A similar ghosting was happening on the screensaver Thanks for any help I really appreciate it

A:BSoD and other possibly related errors

There are a couple naming the drive storage system.
D/L WD's Data lifeguard for DOS CD, burn to a CD then boot from the CD and run the long(extended) test on the hard drive> WD Support / Downloads / SATA & SAS / WD Blue / SE / SE16 (SATA II)


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

NTFS_FILE_SYSTEM (24)
If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
parameters are the exception record and context record. Do a .cxr
on the 3rd parameter and then kb to obtain a more informative stack
trace.
Arguments:
Arg1: 00000000001904aa
Arg2: fffffa600ac565c8
Arg3: fffffa600ac55fa0
Arg4: fffff80002a4e0fb

Debugging Details:
------------------


EXCEPTION_RECORD: fffffa600ac565c8 -- (.exr 0xfffffa600ac565c8)
ExceptionAddress: fffff80002a4e0fb (nt!ExfAcquirePushLockExclusive+0x000000000000001b)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT: fffffa600ac55fa0 -- (.cxr 0xfffffa600ac55fa0)
rax=fffffa800460c820 rbx=fffff8800c419800 rcx=00fffa80068b2d78
rdx=0000000000000008 rsi=0000000000000000 rdi=00fffa80068b2d78
rip=fffff80002a4e0fb rsp=fffffa600ac56800 rbp=fffffa8008a3c710
r8=fffff8800c419810 r9=ffffffffffffffff r10=0000000000000155
r11=fffffa600ac56850 r12=0000000000000000 r13=0000000000000000
r14=fffffa8008a3c6c8 r15=fffff8800d055398
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246
nt!ExfAcquirePushLockExclusive+0x1b:
fffff800`02a4e0fb 488b19 mov rbx,qword ptr [rcx] ds:002b:00fffa80`068b2d78=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002c2b080
ffffffffffffffff

FOLLOWUP_IP:
fileinfo!FIStreamCleanup+4a
fffffa60`00a5569a 488b4308 mov rax,qword ptr [rbx+8]

FAULTING_IP:
nt!ExfAcquirePushLockExclusive+1b
fffff800`02a4e0fb 488b19 mov rbx,qword ptr [rcx]

BUGCHECK_STR: 0x24

LAST_CONTROL_TRANSFER: from fffffa6000a5569a to fffff80002a4e0fb

STACK_TEXT:
fffffa60`0ac56800 fffffa60`00a5569a : fffff880`0c419800 fffffa80`00000000 fffff880`0c419800 fffffa60`00a05000 : nt!ExfAcquirePushLockExclusive+0x1b
fffffa60`0ac56870 fffffa60`00a124f9 : ffffffff`ffffffff fffffa80`0491afd0 00000000`00000000 ffffffff`ffffffff : fileinfo!FIStreamCleanup+0x4a
fffffa60`0ac568c0 fffffa60`00a2c368 : fffff880`0c4197b8 fffffa60`00a05000 00000000`00000014 fffff880`0d2105f0 : fltmgr!DoFreeContext+0x69
fffffa60`0ac568f0 fffffa60`00a25cd1 : fffffa80`068ae8d0 fffffa80`06c1c180 fffff880`0d055140 00000000`00000000 : fltmgr! ?? ::NNGAKEGL::`string'+0xcc0
fffffa60`0ac56920 fffffa60`00a25c8c : fffffa80`068ae8d0 fffffa80`068ae8d0 fffffa80`06c1c180 fffff880`0d684010 : fltmgr!CleanupStreamListCtrl+0x21
fffffa60`0ac56960 fffff800`02cbc1e6 : 00000000`00000000 fffffa60`0101b39a fffff880`0d055270 fffffa60`005efcc0 : fltmgr!DeleteStreamListCtrlCallback+0x6c
fffffa60`0ac56990 fffffa60`010cb1c6 : fffff880`0d055140 fffffa60`0ac56a68 000000... Read more

http://www.techsupportforum.com/forums/f299/bsod-and-other-possibly-related-errors-674218.html
Relevancy 65.36%

i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff

110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+4a63cc C:\Windows\Minidump\110414-10576-01.dmp 6 15 7600 262,144 11/4/2014 10:48:41 PM is some info i dont know what else yall need

A:0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame

Please Help

http://www.sevenforums.com/bsod-help-support/351242-0x00000124-ntoskrnl-exe-ntoskrnl-exe-4a63cc-bsod-error-runninganygame.html
Relevancy 64.93%

Hello everyone,
I'm wondering if someone can help me with persistent and annoying ntoskrnl errors that I seem to be getting lately.
The dumps are attached.
They happen when I'm doing anything, firefox web browsing, email, talking on trillian, typing an email in outlook 2007, etc.
I can't seem to pinpoint it, but ntoskrnl is consistently the problem when I view the dumps, but I cannot make out what it means more than that. Does anyone have any ideas?
My system is custom built, specs are in my profile. It runs around 51C idle, and maybe 58C full load, the GPU is around 62C idle and maybe 68C full load, well within the specs from all that I can tell. I'm pretty sure it's not a hardware issue, as there were none of these problems in windows xp pro x64 that I upgraded from to windows 7 pro x64.
Thanks in advance!
-Dave

A:BSOD's with ntoskrnl errors

  
Quote: Originally Posted by Davey83


Hello everyone,
I'm wondering if someone can help me with persistent and annoying ntoskrnl errors that I seem to be getting lately.
The dumps are attached.
They happen when I'm doing anything, firefox web browsing, email, talking on trillian, typing an email in outlook 2007, etc.
I can't seem to pinpoint it, but ntoskrnl is consistently the problem when I view the dumps, but I cannot make out what it means more than that. Does anyone have any ideas?
My system is custom built, specs are in my profile. It runs around 51C idle, and maybe 58C full load, the GPU is around 62C idle and maybe 68C full load, well within the specs from all that I can tell. I'm pretty sure it's not a hardware issue, as there were none of these problems in windows xp pro x64 that I upgraded from to windows 7 pro x64.
Thanks in advance!
-Dave


Hi and welcome

The good news is that all of the dumps did involve ntoskrnl. The dumps all showed memory management issues. they also show you didnt do a clean install. there are drivers in your system from as far back as 2006.

I would do the following

download and run memtestx86 for hours preferable overnight
Update all your drivers including BIOS, video, wifi, ets
Run a system file check to run type cmd in search>right click and run as afmin
type SFC /SCANNOW
let us know the results

If you overclocking STOP

Let us know if you need help with any of this

Ken J

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\111509-21184-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*Symbol information
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c03000 PsLoadedModuleList = 0xfffff800`02e40e50
Debug session time: Sun Nov 15 16:53:49.559 2009 (GMT-5)
System Uptime: 0 days 0:06:40.572
Loading Kernel Symbols
...............................................................
................................................................
...................................................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa80017465d0, ffff, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+339d6 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, The subtype of the bugcheck.
Arg2: fffffa80017465d0
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: firefox.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002ce726e to fffff80002c74f00

STACK_TEXT:
fffff880`0b5ef828 fffff800`02ce726e : 00000000`0000001a 000... Read more

http://www.sevenforums.com/bsod-help-support/39119-bsods-ntoskrnl-errors.html
Relevancy 64.93%

Hello I have been having issues with these two files I am using BlueScreenView to view what is causing the problem Dump File - - dmp Crash Time AM Bug Check String Bug Check Code x Parameter Parameter ffffe efadd Parameter be Parameter a Caused By Driver hal dll Caused By Address hal dll File Description Product Name Company File Version Processor x Crash Address ntoskrnl hal.dll BSOD errors and ntoskrnl.exe exe a Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File Time AM If you need any other information just ask This problem has been happening to me for a few days now and I just want it fixed My temperatures are fine at c on load Here are my PC specs i - K at ghz gb ddr corsair vengeance ram tb western digital hard drive GTX Asrock extreme z motherboard H i liquid cooler w seagate power supply Nzxt H case gb Kingston Hyperx k SSD

A:BSOD hal.dll and ntoskrnl.exe errors

Hi ifaymous ^_^,

I am really sorry for the delayed response . There are not many analysts around and hence the delay. Do you still require help with this problem? If yes, then kindly respond to this thread and I would be notified via email about your reply. I will also try my best to reply within 48 hours.
-Pranav

http://www.eightforums.com/bsod-crashes-debugging/64592-bsod-hal-dll-ntoskrnl-exe-errors.html
Relevancy 64.93%

My computer has been getting the BSOD frequently over the past couple of weeks. It happens most of the time when I am playing league of legends, but that isn't always the case. I have already tried to run a memtest, but it would get stuck in a loop on test 8 that would say I have between 0-32767 (it kept going down to 0 and back up to 32767 and repeat this action). I have already checked to see if all of my drivers are up to date and they are.

Any help on the matter would be greatly appreciated as this issue is starting to get frustrating.

Thanks,

Cam

A:BSOD - ntoskrnl.exe errors

Hi CNapolitan13,

The 'Mini dump' points at 'ntkrnlmp.exe' (driver) as the cause of system crash.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff80003574db7, fffff88010a41640, 0}

Probably caused by : ntkrnlmp.exe ( nt!KeUserModeCallback+12b )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80003574db7, Address of the instruction which caused the bugcheck
Arg3: fffff88010a41640, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Please try removing 'avast' anti-virus avast! Uninstall Utility | Download aswClear for avast! Removal; and recheck results. Also install 'Windows Updates' to install 'Microsoft Security Essentials' (and other required updates): Install Windows updates in Windows 7.

If the issue persists, uninstall 'Malware Bytes' while we perform troubleshooting: Programs and Features - Uninstall or Change a Program. For better results, you may run this utility: http://www.malwarebytes.org/mbam-clean.exe > Check results

Hope this helps. Do reply if you have any further questions; would be glad to assist.

http://www.sevenforums.com/bsod-help-support/281338-bsod-ntoskrnl-exe-errors.html
Relevancy 64.93%

Hi I'm new to this forum I have a DELL Studio XPS I x which I've had for just a year It worked fine for BSOD errors ntoskrnl.exe about months then months ago BSOD ntoskrnl.exe errors started crashing randomly This seemed to become more and more frequent I tried several things - Windows Update - chkdsk r - Registry cleaner But none of these solved the problem I then took a more BSOD ntoskrnl.exe errors drastic step and re-installed Windows from the DELL-supplied media Even this didn't resolve the problem I then went through and updated all the drivers No joy After all this I assumed it must be a hardware fault so I tried runing DELL Diagnostics memory hard-disk fan etc - all tests passed okay I even did a -hour soak test on the memory access tests with no failures But as soon as I rebooted into windows it went BSOD again Interestingly it seems rock-solid when running diagnostics - but unstable in Windows Any help would be greatly appreciated Please see attached files Thanks and regards Rob

A:BSOD ntoskrnl.exe errors

  
Quote: Originally Posted by rlguildford


Hi

I'm new to this forum. I have a DELL Studio XPS 8000 I7 (x64), which I've had for just a year. It worked fine for about 9 months, then 3 months ago started crashing randomly. This seemed to become more and more frequent.

I tried several things.
- Windows Update
- chkdsk /r
- Registry cleaner
But none of these solved the problem.
I then took a more drastic step and re-installed Windows 7 from the DELL-supplied media. Even this didn't resolve the problem. I then went through and updated all the drivers. No joy.

After all this I assumed it must be a hardware fault, so I tried runing DELL Diagnostics (memory/hard-disk/fan etc) - all tests passed okay. I even did a 48-hour soak test on the memory access tests, with no failures. But as soon as I rebooted into windows it went BSOD again. Interestingly it seems rock-solid when running diagnostics - but unstable in Windows.

Any help would be greatly appreciated!
Please see attached files.

Thanks and regards
Rob



Hi Rob and welcome

These BSOD's were caused by mcshield.exe which is part of your Macaffee AV. It should be removed and replaced with Microsoft security essentials.

Also of note mcshield is causing a memory exception so I would like you to test y our memory as well just in case.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\012611-21949-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03004000 PsLoadedModuleList = 0xfffff800`03241e50
Debug session time: Wed Jan 26 15:31:19.080 2011 (GMT-5)
System Uptime: 0 days 0:01:16.236
Loading Kernel Symbols
...............................................................
................................................................
...............
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {403, fffff68000096910, bff0000125ae2867, fffff68000099b10}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+31ef2 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000000403, The subtype of the bugcheck.
Arg2: fffff68000096910
Arg3: bff0000125ae2867
Arg4: fffff68000099b10

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_403

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: mcshield.exe
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.
Just r... Read more

http://www.sevenforums.com/bsod-help-support/140816-bsod-ntoskrnl-exe-errors.html
Relevancy 64.93%

EDIT Just realized I uploaded the wrong zip folder It doesn't have everything randomly Multiple occuring with BSOD's errors multiple in it Fixed that now though Sorry about the hassle Multiple BSOD's with multiple errors occuring randomly So I built my own PC a a good few months back and within Multiple BSOD's with multiple errors occuring randomly a month I experienced a BSOD and now they are very frequent They can happen three or four times a day or none for a few days They don't seem to happen because of any application either They seem to occur randomly The error's that appear to be the most common is the 'driver irql not less or equal' and the 'memory managment' error Others have occurred I just can't remember them Another problem I've noticed is that my graphics driver would crash occasionally even though it is up to date I use my computer as a gaming pc and for video editing so its under some heavy pressure I would presume Any help would be much appreciated I attached the event files aswell

A:Multiple BSOD's with multiple errors occuring randomly

Hello Andy!

► Uninstall the following programs.
Start Menu\Programs\AVG : Replace with Microsoft Security Essentials - Microsoft Windows
Start Menu\Programs\DAEMON Tools Pro
Start Menu\Programs\MagicDisc
Start Menu\Programs\MagicISO
► Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
► Enable Driver Verifier

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C5, {0, 2, 0, fffff800033fc6fb}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+ca7 )

Followup: Pool_corruption
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_CORRUPTED_EXPOOL (c5)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is
caused by drivers that have corrupted the system pool. Run the driver
verifier against any new (or suspect) drivers, and if that doesn't turn up
the culprit, then use gflags to enable special pool.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff800033fc6fb, address which referenced memory
Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

http://www.sevenforums.com/bsod-help-support/261344-multiple-bsods-multiple-errors-occuring-randomly.html
Relevancy 64.93%

windows 7 x64
- original install on system but i don't have my disks. they are somewhere...
- full retail version installed
- age of the system is approximately 3 years
- age of the install is approximately 2 years

it seems to happen at random but i get BSODs. approximately 2-3 times a day for a week or so. then nothing for a few days. I cannot seem to reproduce it manually.

i've attached my dump files and health report as advised on this site.

i disabled my antivirus before running this set of error reports as a precaution.
any help would be greatly appreciated.

A:BSOD errors. multiple times during multiple programs

Have you recently added any RAM or new hardware to this system?

Uninstall Any Daemon Tools that you have installed. Those are a common reason for BSODs

try these:
SFC /SCANNOW Command - System File Checker

After:
Disk Check

Post back results please.

http://www.sevenforums.com/bsod-help-support/241603-bsod-errors-multiple-times-during-multiple-programs.html
Relevancy 64.93%

Last week I started receiving BSODs and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me I was not sure what all the problems were however I also knew that there was something seriously wrong with my hard drive so I replaced it with a new hitachi After installing windows and running smoothly updating everything and installing for several hours I had a blue screen again I ran memtest and received errors so I'm assuming it's not my RAM and because it's a new installation of windows and a new hardrive I'm assuming those aren't the issues I am planning on taking it in to a shop tomorrow to see if they can diagnose what's malfunctioning but if Multiple 0x0000001A times BSOD errors multiple someone here can tell enough then I would appreciate it Blue screens happened at multiple temperatures C C Blue screen event log I did not save the first problem signature - Provider Name BSOD Multiple times multiple errors 0x0000001A Microsoft-Windows-Kernel-Power Guid C B A- - C -AC E- C D B EventID Version Level Task Opcode Keywords x - TimeCreated SystemTime - - T Z EventRecordID Correlation - Execution ProcessID ThreadID Channel System Computer Pirro - Security UserID S- - - - EventData BugcheckCode BugcheckParameter x BugcheckParameter xfffff a BugcheckParameter xd f f b BugcheckParameter xffbff a SleepInProgress false PowerButtonTimestamp BSOD Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode a BCP BCP FFFFF A BCP D F F B BCP FFBFF A OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users John AppData Local Temp WER- - sysdata xml Read our privacy statement online Windows Privacy Statement - Microsoft Windows If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt

A:BSOD Multiple times multiple errors 0x0000001A

Hello and welcome, please try the steps below.





Quote:
Based on the bugchecks, I would recommend you follow and complete the steps given below:1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a Hard Drive Diag.

9. Test and Diagnose RAM issues with RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

10. Monitor hardware temperature for overheating issues with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor

http://www.sevenforums.com/bsod-help-support/308114-bsod-multiple-times-multiple-errors-0x0000001a.html
Relevancy 64.5%

This is a new rig i built on the first two days of use it ran fine with windows -bit but then gave me consistent blue screens of death Mostly PAGE FILE IN NONPAGED AREA but it differs from time to Likely errors Hardware-related constant BSOD time and after much fighting with drivers reconnecting everything i re-formatted and installed windows again but a while later it happened again the same day I ran memory tests on the RAM several times and it Likely Hardware-related constant BSOD errors came out without errors so i re-formatted again and this time installed windows xp -bit thinking it might be -bit driver issues but later the blue screens appeared againg and again I ran IntelBurnTest to see if it s the CPU I tried different RAM sticks tried different GPUs and tried Furmark But the problem cannot be re-created I tried all of them together to see if anything crashes but hours later still nothing My current suspects are the Motherboard and the Hard drive Checkdisk came out okay though I really don t know what to do with this i m pretty stuck I ll upload some Dump files from my Minidump folder i hope it contains the answer to this mystery I m pretty sure it s not drivers or software because it crashed clean windows even on safe mode and because i used various versions of drivers to no worth Thank you for reading this and trying to help nbsp

A:Likely Hardware-related constant BSOD errors

Forgot specs:
Motherboard: Asus M2N-e (Non-SLI)
CPU: AMD Athlon II x3 445
RAM: 2*2GB Kingston DDR2 800MHz CL6
GPU: AMD Radeon HD5770
PSU: SeaSonic SS-500ET
Issue is not Heat-related, case is well-ventilated and i keep a close eye on the temperatures of all components.
 

https://forums.techguy.org/threads/likely-hardware-related-constant-bsod-errors.993682/
Relevancy 64.5%

I've got a new Laptop with Windows 8, after upgrading to Win 8.1 and installing Fujitsu Drivers and some Software many BSOD occur, saying
PAGE_FAULT_IN_NONPAGED_AREA ntoskrnl.exe
or
PAGE_FAULT_IN_NONPAGED_AREA hal.dll.

Attached is the SF file,
Thanks for your help

trailracer

A:Win 8.1 multiple BSOD hal.dll, ntoskrnl.exe

Drivers that must be updated or removed:


Code:
1: kd> lmvm fcrimg4
start end module name
fffff800`019b5000 fffff800`019c4000 fcrimg4 (deferred)
Image path: fcrimg4.sys
Image name: fcrimg4.sys
Timestamp: Fri Nov 13 08:02:43 2009 (4AFD58F3)
CheckSum: 00015429
ImageSize: 0000F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Update or uninstall SecureDrive software.


Code:
1: kd> lmvm FUJ02B1
start end module name
fffff800`02aff000 fffff800`02b00e80 FUJ02B1 (deferred)
Image path: FUJ02B1.sys
Image name: FUJ02B1.sys
Timestamp: Wed Nov 01 05:50:43 2006 (45486DF3)
CheckSum: 000118FB
ImageSize: 00001E80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Update the Fujitsu FUJ02B1 Device Driver, or uninstall it completely from the machine.


Code:
2: kd> lmvm rtcrfilt64
start end module name
fffff800`013f0000 fffff800`013f9000 rtcrfilt64 (deferred)
Image path: \SystemRoot\System32\drivers\rtcrfilt64.sys
Image name: rtcrfilt64.sys
Timestamp: Thu Dec 01 04:43:09 2011 (4ED74C2D)
CheckSum: 0001014D
ImageSize: 00009000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Driver Reference Table - rtcrfilt64.sys

You should also update the Realtek HD Audio codec driver to newest (pay attention to installer's instructions):


Code:
2: kd> lmvm RTKVHD64
start end module name
fffff800`02a72000 fffff800`02e5e500 RTKVHD64 (deferred)
Image path: \SystemRoot\system32\drivers\RTKVHD64.sys
Image name: RTKVHD64.sys
Timestamp: Mon Aug 27 01:57:17 2012 (503B0C3D)
CheckSum: 003FD45C
ImageSize: 003EC500
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

http://www.eightforums.com/bsod-crashes-debugging/39055-win-8-1-multiple-bsod-hal-dll-ntoskrnl-exe.html
Relevancy 64.5%

hi
laptop model: msi gt70 dragon edition 2

Happens randomly please help .

A:Multiple BSOD ntoskrnl.exe win 8.1

Only 22 Windows Updates installed. Most systems have 60 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

At times the Killer Network Manager may cause BSOD problems:





NOTE: See this link first: BSOD while playing on msi gt70 dragon edition 2 (thanks to kaelaan) It appears that the Killer Service problem was solved with the latest release of the Qualcomm versions of the drivers (so try updating to a version dated from later in 2014).




The Qualcomm Atheros Killer Service/KillerNetManager is known to cause BSOD's. Please follow the workaround instructions here:





First, open the Run dialog (Win + R keys) and type in "services.msc" (without the quotes) and press Enter
Scroll down and locate the "Qualcomm Atheros Killer Service" and right click on it. Select "Stop"
Right click on it again and this time select "Properties"
In the dropdown box for "Startup type", select "Disabled", then click on the "OK" button at the bottom of the window

Next, open Task Manager (right click on TaskBar and select "Task Manager")
Click on the "More details" dropdown (if present)
Click on the "Startup" tab
Scroll down and locate the "KillerNetManager" entry, right click on it and select "Disable"
There may also be an Install Shield (with the Killer gaming K next to it), if so Right click on it and select "Disable"
Finally, restart the system in order for the changes to take affect.



At times the Killer Network Manager will continue to load. If so, it's usually listed in the MSINFO32...Software Environment...Startup Programs section. If it is, please try this:





It may be that the instructions aren't stopping everything.
In some cases, there's a program running out of the Program Files/Program Files (x86) directory.
"c:\program files\qualcomm atheros\killer network manager\killer~1.exe" (NOTE: killer~1.exe is most likely killernetmanager.exe)
In other cases, there's a program running out of c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe (the long string of letters and numbers may change)

Here's some things to try
1) Please see if there are any entries in the Startup tab of Task Manager that are related to Qualcomm/Atheros/Killer Network Manager (and NOT the card itself) and disable them (please let us know what you find) Be careful as the wrong selection can disable the network card.
2) Check in "msconfig" for any entries that aren't in the Startup tab of Task Manager. Let us know if you find any Qualcomm/Atheros/Killer entries there (we'll disable them differently if they are there).
3) Locate the "c:\program files\qualcomm atheros\killer network manager\killer~1.exe" and rename the .exe to .BAD (the killer~1 is actually a filename that starts with killer and ends with .exe) There will be an error in event viewer, but it'll stop the bugger from loading.
4) Locate the "c:\windows\installer\{Long string of letters, numbers, and dashes}\networkmanager.exe_130c27d738f34c89bddf21bcfd74b56d.exe" entry and rename the last .exe to .BAD (the long string of letters and numbers may change)

Just FYI - here are the MSI workaround instructions: MSI USA











Out of 16 memory dumps there were 5 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we... Read more

http://www.eightforums.com/bsod-crashes-debugging/46421-multiple-bsod-ntoskrnl-exe-win-8-1-a.html
Relevancy 64.5%

Hi guys!Made a fresh Win10 install with just basic software (Like whocrashed)I have tried using the Guru3Ds tool to remove all traces of old video card drivers and installed the newest ones without any extra software or bloatware.Have ran Memtest for 24 hours without a fault.I am still getting BSODs from ntoskrtnl all the time.Any pointers?

http://www.bleepingcomputer.com/forums/t/625432/multiple-ntoskrnl-bsod/
Relevancy 64.5%

Hello So I've recently created my own custom build computer and have had multiple BSoD's to the point of me worrying frantically as to why they're reoccurring with higher frequency ntoskrnl.exe - Multiple BSoD's The activities I usually participate in which BSoD's happen are Watching YouTube videos sometimes have Multiple BSoD's - ntoskrnl.exe more than two open in separate Google Chrome tabs Opening multiple tabs in Google Chrome Not always the case - tabs open as I'm typing this Playing games such as League of Legends RuneScape or Mortal Kombat Leaving the computer idle or in Sleep Mode I've tried Re-installing Windows Professional x Using BlueScreenView to identify the fault finding that three of four BSoD's since re-installation of Windows were caused by quot ntoskrnl exe quot whilst one was caused by quot Ntfs sys quot and quot ntoskrnl exe quot Running Memtest for Passes with no errors Running a Visual Memory Stress test Running Malwarebytes and CCleaner along with Multiple BSoD's - ntoskrnl.exe avast Antivirus to no avail Updating all known Drivers I can possibly think of probably missing a ton Checking for new Windows Updates - I have SP and there are no new updates available BSoD's so far This list by the looks of it is going to get much worse - - dmp - - SYSTEM SERVICE EXCEPTION - x b - - dmp - - MEMORY MANAGEMENT - x a - - dmp - - NTFS FILE SYSTEM - Multiple BSoD's - ntoskrnl.exe x - - dmp - - PAGE FAULT IN NONPAGED AREA - x - - dmp - - PAGE FAULT IN NONPAGED AREA - x - - dmp - - MEMORY MANAGEMENT - x a - - dmp - - MEMORY MANAGEMENT - x a - - dmp - - PAGE FAULT IN NONPAGED AREA - x Side Note I've been noticing Google Chrome Adobe Shockwave crashing regularly and tabs reverting to quot Aw Snap quot whilst games crash either mid-way after automatic closure League of Legends or manual closure I've even had League of Legends tell me my client files may be corrupt and ask me to repair my installation has never had that issue before Something really is wrong and I am at my wits end with this All computer hardware components are new except for speakers and my headset and this has been happening daily for the past week If anyone can shed some light on the situation I'm not much of a computer guru I'd be over the moon

A:Multiple BSoD's - ntoskrnl.exe

Seems I just had another BSoD, involving "ntoskrnl.exe" and "win32k.sys" with the Bug Check String "PAGE_FAULT_IN_NONPAGED_AREA" - 0x00000050

I was playing RuneScape whilst watching a YouTube video this time, about five tabs in Google Chrome (mostly this forum).

I updated the main post list of BSoD's, but I'll attach the .zip file made by dm log collector in this post as I don't know if replacing the old .zip will delete any information needed of the previous BSoD's.

http://www.sevenforums.com/bsod-help-support/334137-multiple-bsods-ntoskrnl-exe.html
Relevancy 64.5%

-Windows 7 64bit
-original os windows vista
-full retail version
-2008 hp pavilion
-windows 7 installed in 2011 after upgraded hard-drive and some other goodies
The computer was given to me by a friend who had no more use for it but decided to upgrade it before he did. I'm not sure how it was running before but i was soon to find out that it gets a lot of BOD's. Was planning to use it for school and don't have any money to buy a new one so any help would be appreciated Thanks!

A:multiple BSOD ntoskrnl.exe

Hello,

Start by flashing the latest BIOS for the machine, found here: Napa-GL8E Motherboard BIOS Update HP Pavilion a6500f Desktop PC - HP Customer Care (United States - English)

Your Broadcom wireless adapter drivers were blamed multiple times. Unfortunately, HP has not released updated ones on their site, but you can probably get away with installing ones from another manufacturer. Dell has some here: Drivers and Downloads

More than likely, the Dell installer will error out as it realizes you do not have a Dell card. However, if you cancel the installer after the files have finished extracting, you can then manually install the drivers using Device Manager. Enter "devmgmt.msc" into the start menu, right-click on the wireless adapter, and select "update driver software". Select "Browse my computer...", and choose the location the drivers were extracted to. By default, the extraction will take place in C:\dell\drivers\R258276.
Code:
bcmwl664.sys Tue Jul 07 20:45:04 2009 (4A53EC10)
Windows 7 SP1 should be installed: Learn how to install Windows 7 Service Pack 1 &#40;SP1&#41;

Also:
Code:
Event[2928]:
Log Name: System
Source: Display
Date: 2011-08-16T18:55:17.000
Event ID: 4101
Task: N/A
Level: Warning
Opcode: Info
Keyword: Classic
User: N/A
User Name: N/A
Computer: Viv-PC
Description:
Display driver nvlddmkm stopped responding and has successfully recovered.
Install updated nVidia display drivers from here: Drivers - Download NVIDIA Drivers
Code:
nvlddmkm.sys Thu May 14 16:48:07 2009 (4A0C8387)
That's all the software causes I can see (at least for now). If the BSODs persist, upload a fresh jcgriff2 report, and based on that, we may start running hardware diagnostics or try to address other software issues.

...Summary of the dumps:

Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 12 23:35:28.928 2011 (UTC - 4:00)
System Uptime: 0 days 0:29:21.175
*** ERROR: Module load completed but symbols could not be loaded for usbhub.sys
*** ERROR: Symbol file could not be found. Defaulted to export symbols for USBPORT.SYS -
Probably caused by : usbhub.sys ( usbhub+129ec )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xFE
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xFE_usbhub+129ec
BiosReleaseDate = 03/28/2008
SystemProductName = KQ495AA-ABA a6500f
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 12 23:48:24.301 2011 (UTC - 4:00)
System Uptime: 0 days 0:02:55.548
*** WARNING: Unable to verify timestamp for bcmwl664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl664.sys
Probably caused by : bcmwl664.sys ( bcmwl664+1b0d3 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: ccSvcHst.exe
FAILURE_BUCKET_ID: X64_0xD1_bcmwl664+1b0d3
BiosReleaseDate = 03/28/2008
SystemProductName = KQ495AA-ABA a6500f
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Aug 12 23:44:49.650 2011 (UTC - 4:00)
System Uptime: 0 days 0:08:41.898
*** WARNING: Unable to verify timestamp for bcmwl664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl664.sys
Probably caused by : bcmwl664.sys ( bcmwl664+98062 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: ccSvcHst.exe
FAILURE_BUCKET_ID: X64_0xA_bcmwl664+98062
BiosReleaseDate = 03/28/2008
SystemProductName = KQ495AA-ABA a6500f
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16841.amd64fre.win7_gdr.110622-1503
Debug session time: Thu Sep 8 17:53:36.494 2011 (UTC - 4:00)
System Uptime: 0 days 0:01:13.741
Probably caused by : ntkrnlmp.exe ( nt!KeWaitForSi... Read more

http://www.sevenforums.com/bsod-help-support/185593-multiple-bsod-ntoskrnl-exe.html
Relevancy 64.5%

hey all

So heres the thing, about 2 week ago, i started having BSOD, didn't do anything about it at first not giving it much though.

But now, it happens everyday, and some times up to 3,4,5 times. I've checked WhoCrash and it says its mostly

storport.sys
ntoskrnl.exe
swdumon.sys

it has to do with out of date drivers i think. I tried using driver updater such as SlimDrivers, but every time im actually downloading the drivers, my computer Crashes.

ive also tried that Windows Driver verifier but wasn't understanding it much. I don't have much knowledge when it comes to these problems.

Please help, i need my computer for work and this is really slowing me down

thank you

A:BSOD many different errors storport.sys ntoskrnl.exe

Stray crash dumps are not enough. You need to supply and we need to check all the files as per the Blue Screen of Death (BSOD) Posting Instructions .

http://www.sevenforums.com/bsod-help-support/371043-bsod-many-different-errors-storport-sys-ntoskrnl-exe.html
Relevancy 64.5%

Hello. Since 2 months i'm getting several BSOD errors. They appear in random moments when i'm playing games, watching videos etc. I have really no idea how i can fix this Here is the dump file: ​051816-14187-01.dmp - Google Drive

A:Random BSOD errors(ntoskrnl.exe)

Please use the BSOD posting instruction to provide the Dumpfile BSOD - Posting Instructions - Windows 10 Forums

http://www.tenforums.com/bsod-crashes-debugging/50752-random-bsod-errors-ntoskrnl-exe.html