My acer active pen is not working consistently. The screen recognizes it sometimes, and other times it does not. The only way I can get it to recognize is by power cycling the pen (taking the battery out and putting it back in), or by power cycling the laptop. I replaced the battery so I know it is not a battery issue. I have an Acer Aspire R13 (Model #R7-371T), and recently upgraded to Windows 10. I was having this problem earlier with Win 8.1, but it seems to have gotten worse with Windows 10. I have updated to all the most recent drivers. Very frustrating. Any thoughts?
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
http://acer.custhelp.com/app/answers/detail/a_id/34304/~/acer-active-pen-stylus-for-aspire-r7-371tNote: When the Acer Active Pen has not been in use for 1 minute, the pen will go into sleep mode.http://community.acer.com/t5/S-and-R-Series-Laptops/Acer-Active-Pen-problems-Acer-Aspire-R13-Model-R7-371T/td-p/388575
To start off my laptop is an Asus G VW-AS The wireless network adapter is an Atheros AR WB-EG The issue I m having only starts when I play an online game It s not a specific one it happens with all my games After about a few matches I will begin to experience terrible lag spikes Ranging from - ms sometimes even going up to over Usually the spikes are permanent I will jump to around ping and hover in that general number with it occasionally sliding back down to my normal only to immediately spring back up again After this begins to happen any application I use that uses internet internet browser skype etc also lags is severely slowed down This lag is never experienced on any other system using our wireless internet which makes me believe it is in fact my laptop s wireless adapter that is the problem Doing a windows troubleshoot on the adapter DOES fix it but it only fixes it for about to minutes and then I begin to lag adapter network Problems with wireless again Also the troubleshooter seems to only be able to fix it once If I try to troubleshoot the adapter again after already fixing it before that way the troubleshooter will tell me that it couldn t find anything wrong Manually restarting the adapter only works once as well Restarting the computer does not help the problem If the laptop is shut down for a few hours and started back up the adapter will work properly as long as I do not start a game Could anyone help tell me how to stop this from happening Do I need to get a new adapter or is there something I can do for the current one nbsp
Are you sure it is not an issue with your router? Also I dont know where to get Atheros drivers other than from the manufacturer (vaio, lenovo, etc) website. There are no official drivers
AMD has released an updated statement regarding the noise issues experienced by the initial buyers of its Radeon R9 Fury X graphics cards.
Are they saying "screams like a banshee until we smothered it in glue"? Does anyone have a more engineered approach to the issue - like decibels at a specific distance?
Acer has added a new monitor to their gaming-focused lineup, the amazing looking XR341CK. This 34-inch 21:9 UltraWide QHD (3440 x 1440 pixels @ 75Hz) IPS monitor comes with a curved display in a zero frame design, which Acer says...
This type of monitor is the best way to channel the power of your GTX 980 Ti, which inherited its anti-aliasing power from the many generations before it, as opposed to having it choke on the 4K pixel-mania in chase for almost the same effect, at the expense of the dropped FPS.
It's been a while since I've posted but I've obtained most of the Sims 2 and I TRIED to install Double Deluxe but for some reason my dvd drive isn't recognizing the disc. It spins up and tries to read it, but doesn't do much in the line of effort to read it.
There are no scratches and I took care of the smudges with a cloth. Still unable to read the install disc. It'll read the promo/bonus disc and play it just fine though.
The computer is a Windows 7 with an HL-DT-ST DVD+-RW GT60N Drive.
I have enough RAM, Graphics and other things to run it.
300 Gigs of Space left on the HDD. No idea what's going on here.
You might have a bad optical drive. Does it work with other DVDs (DVDs not CDs)? Do you have access to another DVD drive with which to substitute for testing purposes?
I have a linksys router that has stock firmware and I can get into the config by 192.168 etc but I can't get it to see the internet. I have a isp that gives dhcp ip so no login needed. Any ideas?
Hello I have a tower just recently bought all the parts from newegg and was building the tower for the last days I had everything put in as it should be and initially it stayed on but no image was portraying problems up boot Building computer on the monitor A friend explained I was using the wrong port to portray image as it should be through the video card I should be connecting it but after troubleshooting the problem Building computer boot up problems initially I removed RAM and put it back in but computer now turns on for a second then right off I hear and see the fans running the dvd drive spinning and the lights go on but then it shuts right off after another - seconds it turns on again and then after another second turns right back off in an endless cycle until I turn it off completely and unplug it Not sure what the next steps are or if I should return the moba for an exchange After reading a lot of forums I noticed that it could be the RAM was improperly placed so I tried many times to take it out and put it back in but same problem keeps occurring I hear no beeps and only hear a click from the power supply when it goes on I tried the psu tester on the power supply and it tells me it should be working fine Any one have any idea moba ASRock Z M Pro Micro ATX Intel Motherboard ram CORSAIR Vengeance GB x GB -Pin DDR SDRAM DDR PC Desktop Memory Model CMZ GX M A C B power EVGA -G - -XR W Power Supply case Thermaltake Level Series Level GT VN W N Black Computer Case processor Intel Core i - K GHz LGA BX I K Desktop Processor video card EVGA GeForce GTX Ti G-P - -KR FTW w ACX Cooling Video Card Please someone help and thanks to all nbsp
Okay, I've had the same issue with a new build: Put it all together, switch on the power and basically nothing. Do the following tried and true diagnostic steps that can be tedious but costs nothing to do and can often zero in on your issue:
1. Uninstall everything from your motherboard and disconnect all peripherals from your power supply except psu to motherboard, cpu, and one stick of RAM. Now turn it on. If it boots up and stays booted then shut it down and then...
2. Add your second stick of memory -- nothing else. Repeat by booting up and if it stays booted up then...
3. Start adding one piece of hardware at a time and repeat as directed.
What are your findings?
Basically I think it s Laptop Samsung Ultrabook Series 5 Problems; been happening for a month now My laptop screen glitches - the images distorting and sometimes green text appearing - Laptop Problems; Samsung Ultrabook Series 5 before Laptop Problems; Samsung Ultrabook Series 5 righting itself and crashing The only way I can get the Laptop Problems; Samsung Ultrabook Series 5 laptop to function again is to turn it off via the power button or take the battery out and put it back it again It has also become slow starting up - taking at least five minutes before you can log in and then a further five before you can actually do anything The cursor sometimes gets stuck in the center of the screen - I can access things using the tab screen but the cursor won t move whether I use the laptop touchpad or my USB mouse The fan has also been sporadically speeding up before calming down again - even though I ve been doing the same thing for the past god knows when I ve done a boot-up scan using avast had a look through all of my files and gotten rid of any old files that I don t need on there in an attempt to create some space but I ve got about - gb free so I can t see why that should be a problem Nothing happens before the glitches crashes so I don t think I m causing it by moving it and so on About a month ago the charger port was fixed at a laptop repair shop and then the laptop itself was sent off to SAMSUNG to have the motherboard replaced because I mistakenly wiped the bios since one driver update shut the laptop off in the middle of the bios update so I don t know if something is loose and so on I m planning on selling it in a month or two so it s not that much of a problem but of course I don t want to sell it to someone if its being a pain in the backside I also switched from integrated graphics to a nvidia geforce graphics card that is in the laptop when I bought it so that might be why Basic Info Samsung Ultrabook Series Intel Core i GB Ram TB Hardrive bit Operating System NVIDIA Geforce GT M nbsp
This sort of problem is tough to troubleshoot over the internet. It could be quite a few things that could cause the symptoms that you're experiencing. With that said, I'd probably start with updating the discrete GPU drivers. Since you did switch from integrated to discrete, this could be the main cause for the graphic glitches which is probably crashing the system.
Moving forward, I think you should download something like CPU-Z to monitor the CPU load and temperatures during the crashes. It could be that your CPU is overheating and could use some attention.
I have a keyboard that has been working fine last night then this morning this happened:
When I type o it types o+ and when I type l it types l and enter (the key)
So this makes it extremely hard to get anything done, please help, thanks
How old is the keyboard? Sometimes "gunk" gets built up under the keys and can cause the keyboard to start failing. Have you tries to remove the keys (or take the keyboard apart) and properly clean it? There are plenty of tutorials (video and non-video) available if you are unsure of how to clean a keyboard.
Regular cleaning on all computer parts will extend the life of those parts.
My dvd rom is not working wont take cd and makes a noise, will it be worth replacing it or should I just get an external dvd/ cd
I also have a Dell Inspiration 4700 that the on and off switch went bad. It has power therefore I dont think has to do with the power supply. I need some answers please on this two postings. Thank you
I have a Acer Aspire X3400 And I would really likle to upgrade it to 3.0 or 4.0, I also want to raise the FPS from 12 ( ikr, it's crap ) to a standard gaming pc
Please tell me
1. Motherboard size
2. What parts you would advise me to get
3. Where can I find some that will fit
For about the past month or so, my W7 tower on DSL occasionally loses its connection to the internet so I right click the the icon in the notification area & click trouble shoot & it reconnects yet my iPhone & Ipad remain online no problem.
Clearly the router is doing find and the activity on W7 IS THE ISSUE.
Examine carefully what was active when the connection was lost.
My acer battery was getting bad and my computer suggested I change it. Now with my charger plugged in(with or without battery) my laptop will power down after 15-20mins. I have ordered a new battery and will try it but I would have thought my laptop should run fine without one plugged in? Any idea the cause of this? My laptop would run for several hours on safe mode but even now safe mode is being powered down
I am looking to upgrade the GPU on this PC but I am unsure if the PSU will be able to support it. I am not looking to install a high end GPU only a low end card such as ASUS 2 GB AMD Radeon R7 240-2GD3-L PCIe. I am aware that the PSU has a max of 220w but I am unsure of the current load. Based on the basic system with no current upgrades are you able to advise me on this?
Basic specs are:
Windows 7 64 Bit
Intel Core i3 2120
Intel HD Integrated Graphics
2 HD (1 SATA 1GB)
1 Optical Drive
Realtek HD Audio
If necessary I am able to disconnect 1 HD and the optical drive as they are not necessary, also to disable the onboard graphics if possible if this will help.
Here is a related topic
Indeed, I thought initially that it was a EFI problem but the problem is simply a graphic driver issue with the graphic card GeForce 605.Click to expand...
I'm not positive a card can work in your machine and can not give suggestions.
I have a Dell Optiplex 330 which has a 2.0 dual processor with 4gb of ddr2 ram. I have windows xp installed and I have a video card that has 1024 mb of ram. I am unsure of the brand of video card or further specs. I bought it off of ebay some time ago.
My problem is that when I try to play streaming video it wants to freeze a lot. I have already given more space for the virtual memory on my computer: I think 4 to 8 gb and I have set my hardware acceleration way down but these changes haven't helped.
I can download and play movies fine, I only seem to have problems when playing streaming video like from hulu.com or letmewatchthis.com which directs you to sites like: putlocker, deditv, sockshare, loomba, etc. I have used other computers and they don't seem to have as much problems with this so I hope that somebody knows what I need to do to solve this problem. Thanks in advance for any help.
When you say freezing, do you mean just the video freezes, or the whole system? If its just the video, it could have something to do with your internet connection. Is the computer on wired internet or wireless?
Acer announced two new gaming-grade 27-inch monitors at the Consumer Electronics Show last month. The XB270HU garnered the most media attention thanks to its IPS panel and Nvidia G-Sync technology. What Acer neglected to mention at the time, however, was...
Those bezels are awesome! I wonder how much it'll go for though...
I have an Acer that spontaneously decided I no longer needed to play games. Everything else works perfectly fine. It's been doing this for the past few weeks and I've done all that I can. I'm no tech wizard by any means and I need some help. Pretty much it'll open to the load screen for a few moments then disappear back to my home screen. Any ideas on what it could be and what I can do?
These are the specs:
Acer Aspire V5 Touch with Windows 8.1
Model number: Z5WV2
If you need more info let me know, I still have everything for it.
If you are talking about the games that are loaded by a app. You will need to uninstall the app. Then reinstall the app. I have no ideal why this happens . But I have seen it more then once.
Hello all...I'm having problems with my Dell PC. I just purchased a sweet new scanner (ScanSnap SV600) and when I scan a lot of pages at once, I get an error message saying I'm out of storage and to restart the computer. The specific code given is 0x8007000E. I've also been noticing when I run a few web tabs at once, sometimes they just go black and I need to restart the browser. It has 8GB of RAM and all the drivers are updated. Anything I'm missing? Thank you kindly!
Dell Optiplex 790
Win 7 Pro
How much storage space do you have? From what I could research this error is tied to programs demanding a great deal of memory. You say this occurs when trying to scan a lot of pages at once. Does this occur when scanning less material at once? Have you tried updating your drivers for the scanner?
If your Acer M does not start up Don t fret I found a simple solution With the computer turned off Remove side panel Reach M460 Acer inside and hold Acer M460 exhaust fan so it can not move While holding fan Push the on button on the front panel Listen for the quot beep quot sound After you hear the quot Beep quot release the fan The fan will start up after a second or two P S Do not let fan move until you hear the quot beep quot first Many suites on the web say it is the quot capacitors quot NOT TRUE I had this year for over a year When I turned off my Acer M Sometimes it would not start up I got so and I cut the wires inside the computer Purchased another used M it did the same thing Figuring I needed new caps I purchased a set of the two biggest caps Then I needed a soldering gun Then I needed to desolder the caps already on the board Then I purchased a rework station So far I have only used the air gun Starting yesterday This procedure works for me It will work for you as well nbsphttp://www.techspot.com/community/topics/acer-m460.207931/
This ink cartridge http://www.epson.com/cgi-bin/Store/jsp/Product.do?BV_UseBVCookie=yes&sku=T048120
Is labelled as "T048120-S" on some online stores... others it's labeled just as "T048120"
What does the "-S" mean? single cartidge?
Probably means standard capacity.
1 4gb samsung pc3-12800 1.35 v
1 4gb nanya pc3-10600 1.5 v
The timings are listed different on the stick.
HWInfo reports that at 666.7 both are 9-9-9-24
Crucial will sell me all 1.35 v memory as upgrades and the 4830T-6678 Timeline X came with the [email protected]
The laptop boots and runs with both sticks installed
Any thoughts on this?
Is the laptop reporting 8GB of memory installed? If it is, you should be okay
Hello Yesterday I got a virus on an Acer Extensa laptop Said virus was turning on a fake antivirus whenever I opened a file which wanted me to pay a price for a quot cleanup quot I wasn t able to Acer Extensa 5235 booting problem turn anything on Luckily I managed to turn it off through msconfig and delete the virus files Right now however the laptop won t even turn on The Acer Extensa 5235 problem booting quot Acer quot screen goes on the flickers a few times in the upper left corner and the laptop resets I won t even get to a safe mode The notebook had minimal differences from the factory preset had Win Acer Extensa 5235 problem booting and worked until yesterday I have a OEM Win XP home CD at my disposal at the moment I have already tried Booting through BartPe and an iso image of Windows XP on an USB flashdisk To no avail I get to the BartPe layout but the BartPe file explorer shows no disks available Boot through the disk itself At first it didn t load with the error quot STOP X B xf d Xc X X quot which I was able to circumvent by transferring from a SCSI mode to IDE mode in BIOS When I installed Win XP however I had an error concerning a few uncopiable files described for example here - http forums penny-arcade com discussion cant-install-xp-from-any-disk-to-any-disk I skipped everything and the PC now resides in a quot minimal quot Win Xp preset With the former Win configuration of course absent I think I d be able to fix this if I found the MSCONFIG settings for the Windows I used before and which I mistakenly modified I probably turned off something that now blocks the system from starting Is it possible to do so through the new Windows Xp installation The former Win folder is untouched Win Xp runs from another folder Thank you very much for all help nbsp
I had to look up BartPE to see what it was but I think it's unlikely to save the day in your situation.
Assuming that your priority is to get Windows 7 back I'd first check that you have the Microsoft authorisation code for your copy. If it was pre-installed on the laptop there will be a hidden restore partition and you could try holding down the Alt key while tapping F10 to access it. Failing that option I'd download a Windows 7 SP1 ISO, burn it to disc, reinstall the OS and hope that there are no serious driver problems. Both options mean that everything you have installed and saved will be lost unless you have already made backups.
See picture below. Any ideas? Ive cleaned the rollers, and the main charger, and pretty much anything else I can find in the copier. Havent replaced the toner cartridge though. Originally there was toner all over the place and the dotted line was a solid black line. Performing the aforementioned maintenance items got rid of the thick black line but now this remains.
Any help is appreciated
Which is your main brand of choice?
My Acer Aspire shuts down loses power - seconds after powering on It started when I was playing a Acer laptop after seconds down shuts video game and the laptop suddenly shut down I thought it was overheating so I let it cool down About an hour later I Acer laptop shuts down after seconds turned it on and it boot normally but min later the laptop shut down again Next time I tried it turned off minutes then seconds later In those s after pressing the power button no errors or beeps occur just the Acer logo screen I even get past Acer logo sometimes or go to Bios password prompt if i press F just before laptop powers off Acer laptop shuts down after seconds This all happened in the course of a few hours laptop was working fine beforehand no overheating think so cause games lagged when laptop was overheating previously If I turn it on again just after it powered off the laptop shuts down in seconds as opposed to seconds if i leave it alone for a while Also according to task manager CPU and RAM usage is normal when shut down happens Tried Cleaning out the fan and the heat sink wasn t that much dust Fan works Applying new silver thermal grease to CPU and GPU after removing the old one Powering on with only one RAM stick then only the other black screen when I take out both Powering on without Wifi card Powering on without the battery only on AC power Then only with the battery in Powering on without Hard Drive Powering on while putting pressure to the middle of the keyboard read that this might pop the CMOS battery to it s slot if that s the problem Pressing the power button for min There are a lot of people with Acer Aspire who have powering on and off in endless loop problem Supposedly GPU reflow helps I don t think my problem is the same though because my laptop shuts down and doesn t restart Also my screen is working This is the only computer I have Any help or tips would be greatly appreciated nbsp
Are you able to run Memtest for any length of period? Search for YUMI Multiboot. Download that, install it to a spare USB stick. Download memtest from yumi program. Boot off of stick and run memtest.
If not get a new motherboard/cpu off ebay.
I seem to have quite an annoying problem with my new 256gb razerbalde. Whenever I launch a game I get a black screen the sound still works but no response from the screen, I have to put it to sleep and back on again and it works even though sometimes I need to do it 10 times or so. I have updated to all the newest drivers and tried a secondary display through hdmi it gives me the following error message: failed to initialize renderer. Unknow error creating the renderer. I only tried launching skyrim so far. The error seems to happen sometimes but not often when I will start the laptop and the screen will be the same. It's more of a black/greyish color and you notice that it is on.
Any help will be of great use. If the post already exists I am sorry and would be happy to get the link.
I'm having trouble staying on line with telstra connection my internet keeps freezing and dropping in and out I have had trouble with my home line phone and have a bullion modem which this isn't the problem, the problem I believe lays with telstra as I've checked with my server and with downloads and updated my PC so what can I do next.
June Lomas said:
what can I do next.Click to expand...
I have been having quite a few issues with the motherboard I have from ASRock. It is the Z87 Extreme4. My issue is the usb 3.0 No matter what I plug in it says this device can perform faster than this blah blah blah. Anyway, that should not be happening as I am plugging in usb 3.0 devices. What is going on? The other problem is that my front ports that are from the mobod header will no longer recognize any of my external 2.5 hdd. 1 on the back also says this so I am limited to just 3 ports on the back that I can plug into with my external hdd and they are very important to what I do. Is anyone familiar with this? Is this only on this board or a common thing among ASRock? I have other computers and the usb 3.0 works just great.
Have u Installed the drivers? I do not know any thing about ASRock but lots of USB3 have to have the drivers.
I have been experiencing some serious FPS problems with my Laptop recently. I Used to run games at somewhere from 60-120 FPS, but now its dropped down to 5-14 FPS. It happened recently. A couple days ago on Saturday Oct 4rth, I was playing Team Fortress 2 on Steam. I shut off my computer to go to sleep for the night and when I turned on my computer the FPS problem started almost immediately after I turned on the PC. Its not just Team Fortress 2 either, Its happening to all of my other games also. I am not sure on what to do and the only though that comes to my mind when I wonder what the problem could be is a virus. (I have virus protection Webroot but I'm not sure if it works to well.) I might have to Factory Reset my computer, but I want to try different solutions before I Factory Reset. Any Ideas?
My Laptop Info: http://gyazo.com/f1acf76e4e8e9febcec1e6e62991b297
Back up your important data and do the Factory Reset. Apply all the Windows Updates, and then try your games. Webroot is not an antivirus program. Try installing MSE:
Hello...I will start from the begining .
I bought the Acer V5 and tried booting it up...it came with boot-up Linux which means nothing to me so I made a Windows 8 bootable USB and the problems started. First I could'n find the USB and after enabling the Legacy mode it finally found it and booted from it. Turned out the partitions are GPT and as I made the USB MBR it couldn't install so I canceled which I guess was my mistake but there was no other option. After that I created the bootable USB with GPT partition scheme and tried again. Unfortunately this time I got something called GNU GRUB....wth? I googled around and found the commands required for booting - root (hd1,0), then chainloader +1 and finally boot. Then I get the famous The Boot Configuration Data for your PC is missing or contains errors with Status: 0xc000000e. Of course tried that couple of more times but still to no avail. I cannot recover or repair as Windows was never really installed, so I don't know what to do....Hopefully someone here would be able to help. Thanks in advance guys.
Hi all. Well I am having problems with turning on my Toshiba satellite c50-a-19t laptop. The night before there was a smell coming from the fan so I turned it off. I put it on charge in the morning and when it was fully charged I went to use it. The white light on the front goes on for a sec and then goes straight off and the laptop don't power up. Any ideas guys ???
Sounds as though it may have over heated and something may have shorted out. you will need to have it looked at your local repair shop.
Everytime I plug in the Ethernet cord to the router. It lights up and doesn't blink. After a couple of seconds, it just goes dark and I'm unable to use the router.
It works from time to time (I always have to unplug and it replug it back constantly) and I tried plugging in the router without the Ethernet plugged in and it looks like it works fine (Lights blinking). I plug in the Ethernet after that and it continues blinking for a few seconds then it darkens.
It's a Linksys router. WRT5462 V1 (Cisco)
Have you tried more than one cable? The cable could have gone bad.
I m been having some network problems and I m really not sure to make of any of them Networking was never my strong point but I ve done everything I m capable of to try and diagnose and fix this problem So I have comcast and use my own router The last router I had was a netgear and needed replaced because it would restart itself randomly multiple times a day and I d be without internet for about - minutes at a time Instead network wireless Help connection diagnosing problems of trying constantly to fix it I just bought a linksys C to replace it with This problem started happening a little over a month ago and it manifests is self differently every time and the symptoms just don t at up in any logical way before I go out and buy a new router I want to ask you guys Obviously I get disconnected for about a minute at a time but Help diagnosing wireless network connection problems I also have long periods of just EXTREMELY slow internet Help diagnosing wireless network connection problems speeds I m talking mbps down to less than mbps The odd part comes in when I do a speed test during one of these drops in speed The speed test says I m getting all mbps of my connection but the youtube video I ll be watching will need to buffer Pages will also load very slowly but not all of them Techspot Youtube and Outlook all take forever to load during these slow downs but others will load just fine I can t figure out if this is the router or comcast It problem seems like it is a router problem because of me getting disconnected from my router but during these slow downs I can still access my router just fine and my internet speed will be displayed correctly I only have one computer connected to wifi so I can t test other machines What do you guys make of this Also what are some tests I can run to help diagnose this problem I m at wits end about this whole thing The disconnects seems to have stopped when I changed channels in my router to channel but I m still having this severe slow down issue Also as a side note I recently upgraded to xfinity and it came with a new modem These slowdowns have been occurring on both modems which leads me to believe it is the router Here is what I ve tried doing so far gt upgrading firmware gt changing ethernet cables gt changing modems gt changing wireless cards gt adjusting channels gt using different types of security WEP MAC WPA gt reinstalling windows gt using different browsers nbsphttp://www.techspot.com/community/topics/help-diagnosing-wireless-network-connection-problems.204969/
Hey so I wasn t really sure where to post this as I am quite new to the forums but here I go So my first problem is with my laptop s adapter charger not really sure what it s called in english it no longer charges as in the tiny green light no longer turns on when I connect it to problems Two an outlet and yes I Two problems have tried more than just one outlet It s dead From what I ve read on the web I suppose the only way out is buying a new charger Or trying to open the charger box and fixing it Is that possible If so any tips on how to do that - My second problem is releated with the internet modem I have cable internet and after this storm a coupel of days ago it started playing tricks on me even though the cable is plugged into the pc and the modem is working for about a whole minute my pc says that the cable is unplugged and only after that does it recognize it and connect me to the internet Any ideea what s wrong I suppose there s fault in my modem because before when it worked just fine about three green lights turned on right after turning it on but now only two do the dsl and power one I don t know fpr sure but I think the third one used to be ethernet And that s about it If anything s unclear please ask english is my third language so I might have made some mistakes here and there thanks for your time nbsp
DO NOT open that "charger box." It is dangerous to do so because it can hold a charge of electricity for quite some time. Either buy a new charger from the laptop manufacture or, if you can, purchase a new charger from the likes of Targus. I have a Lenovo laptop and bought the Targas brand as a back-up. It works great and Targus supplies several adapters to work on many different brands.
Secondly, was your modem and router plugged into a surge protector or do you have them plugged directly into the outlet?
Your English is quite good.
Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
They are so cheap now it is probably worth everyone's time to just get a new one.
If you really want to troubleshoot it, put it in a different computer or OS.
Dvd burner will duplicate cd's fine, but the movies always say failure after endless times of trying...someone plz help
Had an AMD HP G62-227CL laptop that overheated and required motherboard replacement with similar Intel motherboard. Old board clocked at 2.2 MHZ .. new one is 2.0 MHZ.
Board I got from Ebay works but now computer believes that it is a Compaq CQ42 Laptop. Do not know the model number, which I would need on HPs site to download BIOs upgrades.
Is there a way to tell which bios I need or what model I now have?
Finding a bios update rather then the one hp would give for this board. Would be next to none.
You could check a few of the support pages for this model. Which their are a lot Of
Maybe find out the motherboard you have bought.
HP Support, Drivers, Contact and Help Forums | HP ® Support
Hey guys, I'm pretty much a noob at this.
Long story short... My acer aspire 5552 will not stay on. When I turn it on I have to press on a certain area if not multiple areas. Before I had opened it and cleaned out the fan it use to overheat like crazy it used to hit about 90 degrees I'm wondering if that has ruined something?
Thanks in advance
First of all. Why do you have to hit certain area or for that matter. Multiple areas. It may still be running to hot. Or something was damage when you put in back togather. If it is running to hot . It may need new thermal pads.
Hey everyone I own the Acer Aspire G- and I ve had it for a little over two years now One 5552G-7641 Aspire with Temperatures Acer Extremely High of the main problems I have with it is its temperature Right now when all I have open Extremely High Temperatures with Acer Aspire 5552G-7641 is Firefox and iTunes the temperature according to Speedfan is as follows HD C Temp C GPU C Core C I have the rear of my laptop suspended about cm in the air by putting two bottle caps in the rear corners This is an attempt to promote better cooling When I play video games it overheats to the point that the laptop shuts off automatically I understand that the majority of overheating issues is not cleaning enough And indeed I have never cleaned my laptop before However opening the laptop or bringing it to a tech-guy is not really an option at the moment I have read on many forums that using compressed air is efficient but I have also read that it can be extremely dangerous on laptops because of water moisture Also they seem to only pertain to desktops With that said I am here to ask for advice as to what to do with this thing The only ventilation hole is on the left of the laptop and takes up about of the side If any additional information is needed I will gladly provide it Thank you nbsp
Speedfan is not accurate 95% of the time. Tell me the readings using Realtemp: http://www.techpowerup.com/realtemp/.
Just ruled out malware in other section of this forum. Laptop's integrated keyboard suffers intermittent lock-ups for no apparent reason (sometimes works, sometimes doesn't, right now, doesn't). Touchpad seems deactivated (tried FN + F7 in case of accidental disable, but that's not the case), every option related to touchpad are grayed out in 'mouse' menu (config panel). Before malware check-up,tried system restore to last week, all problems were still there, so I reverted back. I have to use visual keyboard to type. Have to work with external mouse because touchpad doesn't work. Tried reinstalling touchpad drivers from Acer website, and didn't work. Computer worked perfect a few days ago.
Sounds like you may have some system files corrupt. This can occur after a lot of spyware. Some times just removing it dose not correct what it has already messed up. Your best maybe to back up your personal stuff. Then do a factory reinstall.
After formating my PC I realised that the taskbar is unable to appear because the screen resolution does not fit the desktop. how do I set the specific screen resolution for acer aspire one d257. I have tried using the registry tweak for higher screen resolution but it does not work.
I have a toshiba satellite pro and usually use the touchpad with my right hand rather than a mouse. I attached an external mouse for my daughter to use, and changed the settings to lefthanded. I disconnected and shut down. Since then, each time I restart the computer, the touchpad does not work correctly. Instead of double clicking on the touchpad, I have to rightclick. I have to go into mouse settings on control panel, and move the double click speed, click apply and then the touchpad works correctly then. Why is this? Please help.
So newegg is offering the Acer 29" B6 B296CLbmlidprz IPS monitor for about 350. Seems like a pretty good deal but I can't find many reviews on it. I was wondering if anybody had any experience with this monitor and/or if you guys have better options for someone who is looking for an IPS monitor below 400 bucks. I want to game with it as well as do some 3d modeling and photoshop work. So I need reasonable response time for gaming. I was also looking at the HP ZR2440w and was gonna get that until I saw this deal on newegg for a larger monitor. 24" models are fine but if there are good deals on some 27" inch ones then I would be interested in those as well. Any suggestions? Thanks.
Heres the link for that monitor.
Hi So my HTC just old Nokia Problems 7360 spare with got stolen so I had to dig up my old spare phone it s a old Nokia and it works somehow I can call and I can txt but I can t save any new contacts it just says something like quot forbidden action quot anyhow I can t copy old contacts from the Problems with old spare Nokia 7360 phone to the sim card I can t delete old contacts so I was going to reset the whole thing but I have changed the security code by default it should be and I can t remember what I have changed it to and yes I have tried all the possibilities that there are So what to do -any ideas P S It also says that the memory is full and it can t save any MMS WAP what nat settings EDIT Have got it connected to the computer now with a data cable and using Nokia PC Suite and I made a backup of everything just in case but Problems with old spare Nokia 7360 it failed to backup the contacts so I tried to just open and view all the saved contacts but it just fails Anyhow I m not really interested in the old contacts so I don t mind but when it fails to read the contacts it also fails when I try to add new contacts via the computer Next step was to download Nokia Software Updater that s also what the PC Suite suggested but it can t quot find quot the phone when it s connected So what next -I could send it to Nokia so that they there would flash it but then if there is some other problems with it it would cost a fortune and it s not worth it nbsp
You need to go in the nearest nokia care point at your place. You can also go to unauthorised repair shop for reformatting or reflashing.
Hello, yesterday I was using my computer and I shut it off. When I came back a few hours later, the wifi couldn't connect, and, unlike most times life this, it displayed an ethernet symbol with a red 'x' opposed to the normal wireless symbol with an 'x'. My computer stopped connecting to any wireless, though works fine with ethernet.
It is a Lenovo Ideapad with Windows 8
I've tried rebooting (I'm clueless, but not that clueless), updating the OS, uninstalling and reinstalling the computer's drivers along with some more far-fetched stuff (I got desperate) such as removing the battery, waiting a few hours, and plugging it back in, but nothing has worked.
If anyone can help, that would be amazing, thanks!
Seems your WIFI adapter is being disabled. try enabling the device in your device manager or with the Fn+function key provided in your laptop.Click to expand...
That doesn't seem to be the problem, the adapter is enabled and the computer is not in airplane mode
Ok,I am building a PC and I would like to buy EVGA GTX 650 Superclocked 2GB GDDR5.
I got one 120 mm fan and I can afford myself one more(both 1200 rpm)
Will that cut it?
You don't need to if you don't want to.
I recently bought a new Motherboard for my PC, it is a GIGABYTE GA-F2A88XM-D3H, it has a USB 3.0 plug in. However even though I plugged my USB 3.0 plug into it I still have no use. These are my front USB 3.0s, although the sound and mic work fine in the front. I currently am using a Windows 8 64-bit computer and have all drivers up to date, I am wondering if there is a way to turn it on in the BIOS.
It seems to me like you are plugging the USB 3.0 device into the front of your case. If they are not working, it means you probably never connected the USB 3.0 header plug from the motherboard into the case plugs.
This is what I am talking about BTW:
Just to clarify though, you are trying to connect your device using the front case USB plugs? Also, if you plug the USB 3.0 device into the motherboard directly (in the back of the case), does the device work?
Laptop Model Acer Aspire G Graphic Card Model ATI Mobility Radeon HD MB 512MB) screen 5470 with problem Black ATI (Acer Aspire Radeon 4745G HD Mobility OS Windows bits Problem Laptop starting to turn to blackscreen constantly since last week At the Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) beginning it still manage to back to normal after restart But then after few days it turn to black screen during every startup whenever it progress until window start-up animation I can even still hear the welcome sound although the screen is black I can still using the laptop through safe mode After that I google for some related solution and found that it s probably the graphic card display adapter problem So I disable the graphic card Radeon HD Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) option under display adapter and it goes Black screen problem (Acer Aspire 4745G with ATI Mobility Radeon HD 5470 512MB) perfectly well But when I enable the graphic card option under display adapter in normal mode my laptop screen will turns black again back to previous problem I tried to uninstall the graphic card under display adapter and reinstall the graphic card driver download from Acer Support but the problem still appears The graphic card driver after reinstall is appears to be ATI Mobility Radeon HD series instead of previously ATI Mobility Radeon HD Is it normal or I download the wrong driver although it s from Acer Support What should I do to solve this blackscreen problem nbsp
1) Uninstall the all AMD software with this AMD Uninstall tool.
2) Restart your PC.
3) Download and install the latest stable driver (13.4) from here: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx
my acer laptop 7520 shuts itself down after booting for few seconds.
It has Vista but dont think its a software / virus issue. As I got into BIOS / booting menu, it did not stay there. it shuts itself down.
I removed CD rom from laptop but had same result. It has two 1GB rams, I removed them one at a time but had same result. I then removed Harddisk and tried to make it boot from USB, but had same result. It was shutting down after 10 - 30 seconds. I see the Fan running when ever I start the laptop. Fan is very clean. no dust, dont think its a heating problem then.
please can some one advise what could be issue.
I ran it on full battery but had same result. Then I removed battery and connected the power cable into laptop, same result. it shuts down after few seconds.
Sounds as though its over heating. You might try taking a can of air and blowing the vents out. If this has not helped. You may need to take it to a repair shop. and have the thermal pads replaced.
I recently bought GLADIATOR R7 260X Intel i5-4570 3.6GHz Quad Core Next Day Gaming Pc - Aria PC from Aria,it comes with CORSAIR CX series CX430 430W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply - Newegg.com and every so often the monitor goes off which I think may be due to a lack of enough power. Would it be beneficial to change to a Antec TPQ-850 850W Continuous Power ATX12V / EPS12V 80 PLUS BRONZE Certified Modular Active PFC Power Supply - Newegg.com that I have spare?
If you have the PSU as a spare, there is no harm in using it to see if it corrects your problem.
I have a laptop with the Realtek high definition audio and Dolby home theater installed. After the latest win8.1 update the Realtek program has stopped forwarding the sound through the Dolby program (which it managed to do perfectly before the upgrade). I tried using Viper4Windows too but that didn't work eighter. Is there an option anywhere that will allow me to fix this?
Are there any yellow (!) in the device manager?
After upgrading my MacBook Pro with Maverick, Audio Hijack Pro pretends not finding the source application for recording. Anyone the same problem?
Are you having a problem with your Internet connection or Wi-Fi? Whatever the problem ? from a flaky connection to Wi-Fi troubles or even no access to the Internet at all ? some router troubleshooting could fix things.
Some of this also applies to your modem, although many Internet service providers are handing out combined router-modem units these days. Your wireless router and modem may actually be the same device.
Reboot the Router Read more
I have the router of my isp and to have an extended range of the wifi we bought a new router which has a bigger range of its wifi now my brother is connected to this router and the other router is connected into mine which means it is taking the bandwidth of my router now the problem that im having is that when my brother seems to be uploading a photo or School stuff onto the internet my internet keeps disconnecting and lagging which probably means that his uploading is literately draining all mine up and im left with nothing isnt there a way to fix this or to cap the upload speed/download
QoS settings on the main router.
Hey, today i just got a new 4gb memory stick to add to my computer, currently i have 2 2GB DDR3 1333 RAM sticks.(These were both Kingston Memory Sticks) I then added a 4gb DDR3 1333 Ram stick (Crosshair) to the motherboard and made sure they were firmly placed in and it was all fine, I then turn on the computer and find that the motherboard starts beeping once then two beeps after and the Screen is blank, and my mouse & keyboard aren't responding. My current OS is Windows 7 64 Bit, so i shouldn't have a problem installing new ram to my system...
I'm not sure if this is a problem with 2 different brands of sticks or what.. but the fans are running for my Graphics card (I don't have onboard graphics available)
AMD 1055t X6
ASUS M5A99XEVO Motherboard
ATI Radeon 5570
Any help anyone? Thanks
The motherboard does not like that 4GB module. Have you tried the 4GB by itself? If the 4GB module won't run the computer you'll have to stick with 2GB modules. How many memory slots are on the motherboard? ASUS motherboards are notorious for being very picky about memory
OK where to begin Alright I got this new tower that is a decent custom rig I have been having problems with my HDD tb movies music etc and SSD gb OS Games basic running files randomly dropping out The HDD always goes sata Possible problems first I know it happens because I get a pop up from Utorrent saying the file save directory cant be found or there is an error with it I download movies ebooks etc Thats usually the first clue My Asus quick storage will pop up saying a drive has been disconnected then straight away it is found but it is unknown I can see the files in the HDD through my Computer but cant actually Possible sata problems access them I cant resolve this without a restart Now chance of after the restart wether the SSD goes aswell thus my OS A powerdown for a little while usually fixes this Longest wait time mins for a system go Then its all fine and dandy like nothing happened I have checked Possible sata problems connections and cooling psu and Possible sata problems its new so its clean no dust I power down the system most nights out unless I really wanna d l something for the next day It has stock OS with Minecraft Dayz Halflife and Portal installed and I have DLed about tb of previous torrents that I have already dled from trusted supplies with avast installed the expensive one not the free version Apart from that stock Anything else I can tell you to try to help me troubleshoot this please just ask System specs Case Corsair D Full Tower Cooling Corsair Hydro Series H i Liquid Cooler for CPU CPU Intel Core i - K GHz Quad Core LGA Motherboard Asus Z -Plus ATX Memory RAM Corsair GB Vengeance Pro Mhz Video Card x Nvidia Geforce GTX ti Hard Drive Samsung Series Pro GB Hard Drive Seagate Barracuda TB rpm CD-drive LG Blu-ray rewriter combo Power Supply Corsair HX Modular Watt Plus Gold Operating System Windows Professional edition bit And not on here a couple of additional fans Thanks in advance for any help nbsp
Hey Zac. Since it comes back after a power down and brief rest, to me it sounds like a heat buildup problem, maybe even with the CPU. Has the builder checked it out?
Hi Have a new Dell XPS th gen i The motherboard is Intel Series C - Z I have one TB Seagate drive which has Windows on it and two WD active but 1 see does RAID it? not Rapid Storage Intel TB internal hard drives I formatted both WDs and selected RAID in BIOS I selected the WD HDs to create a RAID array with CTRL I Windows didn t recognize them so I went to disk management and created a simple volume The volume was formatted not quick format and now it shows as Healthy Partition I guess it is ready to use because now Windows Explorer RAID 1 active but Intel Rapid Storage does not see it? shows it as one HD TB in size My question is Intel Rapid Storage keeps popping up the you may have an issue with your hardware I go take a look at it and the only drives that are shown are the original TB system drive and the DVD drive No sign of RAID 1 active but Intel Rapid Storage does not see it? the RAID volume I hit refresh but it does not show up I go to System Report and all HDs show up What do you think is happening How can I have Rapid Storage show the RAID volume I already updated Rapid Storage to the latest version Thank you in advance Below is what the System Report shows System Report System Information OS name Microsoft Windows OS version System name WINDOWS-U I N System manufacturer Dell Inc System model XPS Processor GenuineIntel Intel Family Model Stepping GHz BIOS Dell Inc A Intel Rapid Storage Technology enterprise Information Kit installed User interface version Language English United States Driver version ISDI version Storage System Information Controller name Intel R Series C Chipset Family SATA AHCI Controller Type SATA Mode AHCI Number of SATA ports Number of volumes Volume Volume Number of spares Number of available disks Rebuild on Hot Plug Disabled Manufacturer Model number Product revision Direct attached disk Z D P XK Direct attached disk WD-WMAWP Direct attached disk WD-WMAWP Disk on Controller Port Status Normal Type SATA disk Location type Internal Size GB System disk Yes Disk data cache Enabled Command queuing NCQ SATA transfer rate Gb s Model ST DM - CH Serial number Z D P XK SCSI device ID Firmware CC Physical sector size Bytes Logical sector size Bytes Disk on Controller Port Status Normal Type SATA disk Location type Internal Size GB System disk No Disk data cache Disabled Command queuing NCQ SATA transfer rate Gb s Model WDC WD FAEX- BA Serial number WD-WMAWP SCSI device ID Firmware D Physical sector size Bytes Logical sector size Bytes Disk on Controller Port Status Normal Type SATA disk Location type Internal Size GB System disk No Disk data cache Disabled Command queuing NCQ SATA transfer rate Gb s Model WDC WD FAEX- BA Serial number WD-WMAWP SCSI device ID Firmware D Physical sector size Bytes Logical sector size Bytes ATAPI device on Controller Port Location type Internal SATA transfer rate Gb s Model TSSTcorp DVD -RW SH- DB Serial number S Q YBD ANS Firmware D nbsphttp://www.techspot.com/community/topics/raid-1-active-but-intel-rapid-storage-does-not-see-it.199550/
Hey guys, I'm planning to get a laptop for general stuff and gaming. It's important to me that I can play PC games that aren't too intensive graphics wise. I need a laptop that can run games like Skyrim, TF2 and some MMOs at preferably medium to high settings (but I could go for med to low). The laptop I've found is here:
ACER V5-552 15.6" Laptop
Processor: AMD A10-5757M (2.5GHz, 3.5 GHz with Turboboost, 4MB L2 cache)
Storage: I TB HDD (5400 rpm)
6 GB RAM (DDR3) Up to 12 GB installable RAM
Graphics Card: Integrated Radeon HD 8650G
OS: Windows 8(.1)
Is this going to work well with fairly easy games or could I go even more intensive for games like Crysis 3 and BF4?
Thanks for your help,
That processor is OK for gaming but the built in GPU is a little low if your expecting high settings even at 720p (With a decent framerate of course). On a game like Crysis 3 Which is so heavy on GPU's, you will likely only get low on that. As for BF4, I can say Medium 30+ FPS at that resolution. If you want a gaming grade laptop, your going to have to jump up a few notches for performance.
This is a medium-low end gaming laptop designed more for people playing not as intensive games as your listing. If you have a budget, could you list it and we will make some alternative solutions. Im assuming around $550 since newegg lists that laptop for that price, but with only 384 stream processors your not going to get far with that even at 720p except on the low settings. BF3 for instance on the 7660D (Which is just the 8650D essentially) runs at 58FPS average on low settings on a 720p monitor.
I am currently trying to open my laptop so I can clean the processor/graphic card due to over heating. Though I took off all the screws off and no part seems to open... I tried looking on youtube but the models are different. Can someone please help me out?
Similar Asus models might help you even though they are slightly different. You probably have missed a screw hidden in the hard drive or memory/wifi bays...
Last night all of my wireless devices (kids computers, laptop, IPad, and Wii) suddenly stopped working. The only thing I can seem to come up with is to unplug the router and let sit for a few minutes to see if that corrects the problem. It has not.
What else do I need to do to get my wireless connection back up and running?
That was a good try. what was going on for all your devices just before you lost connection?
Hi I have the same problem message quot An Operation was attempted on something that is not a socket quot etc appeared Also my Node Type is unknown I tried all steps mentioned above and I never made it to have Node Type hybrid It appears to be unknown even after adding node type and value And about this quot You should see a complete set of TCP values and using IP problems connection Limited with release/renew the command Prompt ping nslookup quot I got something completely different it says for nslookup that default server is not available server unknown cant find server for address etc Any idea how can I try to fix Limited connection with IP release/renew problems problem It all started with Limited connection with IP release/renew problems IP address conflict Once it was solved thanx to this cmd netsh int ip reset resetlog txt netsh winsock Limited connection with IP release/renew problems reset catalog But it does not work any more It shows that local area network is connected and there is still message about IP address conflict Many thanks in advance Moderator note Moved from this thread http www techspot com community topics limited-connection-with-ip-release-renew-problems nbsp
It's a little difficult to pin down what your problem is without knowledge of your network and router setup, but IP collisions and connection issues that get fixed temporarily with release and renew are usually related to misconfigured DHCP settings. Such as when two routers are distributing IP addresses to the same range of systems, or when some devices list static IP address, or sometimes if a wireless device is also plugged in with a network cable, claiming the same IP address with both connections.
if you ping those google dns addresses (184.108.40.206, or 220.127.116.11) and you get errors instead of replies it just means your not connecting to the internet.
Like I said though this is generic stuff and no one will be able to be more specific until you describe a bit about your overall network layout, and types of connections.
I have been having problems connecting my laptop to the internet over my home's wifi network. Other wireless devices still connect no problem, but since Thursday I can't connect with my laptop. I have tried numerous solutions culled from google, but nothing has worked. My most recent attempt was from this forum so I decided to try here first for a solution specifically for my situation. I have an Asus i5 Windows 7 computer with a netgear wireless router. My laptop says it connects to the network (wireless router shows this connection), but it shows no internet connection. I have used my cell phone as a wireless hotspot and the laptop is able to connect to the internet that way. I used a LAN connection to assure myself that the laptop could connect to the internet and it did just fine. I am at a loss and frustrated beyond belief. Any help would be greatly appreciated.
Did you get this issue solved?
Hi guys ive got a tricky one here, Ive recently run a cat6 straight through cable to a separate dwelling from the main house to my EVG2000 Router modem. the Cat6 cable is connected to the main house at another EVG2000 router modem. The problem I am facing is My laptop(s) and computers can connect wirelessly with internet access fine but my galaxy S4 phones, iphone, ipads and xbox's connect to the new router in separate dwelling but have no internet access how ever they work perfectly through the main house's router fine. I've tried power cycling both modems, tried different ports. I have not tried to forward any ports as of yet as I have little experience in doing so. Hope you guys can help cheers
Hey firz3h. I think I follow you, correct me if I'm wrong. Your internet connection comes into the main house and goes to the EVG2000 wireless modem/router combo. You ran a line from this unit to the separate dwelling and it connects to a second EVG2000 unit, is that so?
Do you need both wired and wireless capability at the separate dwelling or just wireless capability?
If both are needed, a wireless router should be able to have it's DHCP function turned off so that it acts as a switch which will enable you to connect 3 devices by Ethernet. On the fourth LAN jack, I would connect a WAP (Wireless Access Point) which should give you a wireless signal . It might be easier to just get a 4 port switch instead of trying to disable the DHCP function of the second router. DHCP assigns IP addresses to the devices that try to connect, and using 2 on the network will cause issues. I think this would work, correct me if I'm wrong folks.
I have the Acer GN245HQ 3D monitor and I need your help to set the parameters of this screen for that I can have a good calibration of colors, and the best reactivity in game, for exemple what's the right value that I must set in the OSD, now I have the default value OSD=10.
Im using the GTX 680 graphic card.
Plz help me.
Colours are subjective to each display, so must be calibrated separately. Google around for guides.
Has anyone this problem or know how to fix it. When switch on my computer the mouse & keyboard do not work. If I then remove all the USB cables it will then work ok, after a few reboots. I am running Windows 8 64 bit. Would appreciate any advice.
I don t how can I describe this problem detailed enough But my acer aspire G has been turning off randomly this laptop has been with me for about years now and I suspect that because of the age problems will occur I still hope that you guys can help me repair this on my own Windows vista core duo gb RAM mb video Here are the problems mainly about shutting off randomly -I will be using my laptop for the whole night and while using with no heavy applications running it will just shut off -the processor fan is running I shared this info because I suspect that its due to overheating but will still shut off -I already dismantled my laptop just to clean the fan I removed the dirt trust me I really cleaned the fan on Shutdowns, Charging Not 4935G turned Aspire Random when Acer and where the air is coming out clean still shutting off randomly -I tried putting a desktop fan under the laptop not just a usb laptop cooler but really an electric fan to remove overheating But still shuts off -now here s the weird part I play NBA k which we know is a very heavy game in terms of processing and video and RAM etc If I play NBA k it doesnt shut off Ever but if I do an alt tab to go to my desktop after a few mins it will Acer Aspire 4935G Random Shutdowns, Not Charging when turned on shut off weird thinking that shutting off will mostly occur while playing games But no it doesnt shut off while playing NBA k this is the only PC game I play -if I go to ctrl panel gt power options gt quot Acer ePower Management quot and if I adjust my CPU Speed to quot High quot and quot Maximum quot laptop will shut off in few seconds So right now my laptop is always running in quot Low quot OTHER MAJOR PROBLEMS - for example ill be using my laptop for the whole night in the morning if I plug in the laptop its charging BUT if I pressed the ON Button the charging STOPS so imagine if I dont have a battery inserted in the laptop it WONT TURN ON because its not charging -now if I put the battery and I turn on the laptop it will continue to boot BUT for as many as tries or more it wont reach my desktop because the laptop keeps shutting off AND ITS STILL NOT CHARGING Hope you guys can imagine -now my battery is like dead it doesnt last for an hour I think this is a common problem for year old laptop batteries so imagine the problem if my laptop wont charge even with the battery connected I cant turn on my laptop I just wish that the battery could hold enough power to complete the boot to windows -charging of the laptop or electricity flow will resume in the laptop after a few mins only if I make it to windows I don t know what triggers the charging But my laptop will just Start charging RANDOMLY So this is like the best condition of my laptop WHEN ITS CHARGING and NO SHUTTING OFF Occurs -everything just starts randomly in my laptop SHUTDOWNS AND CHARGING and I cant really find what triggers the SHUTDOWNS and THE CHARGING -if I remove the charger laptop will turn off battery cant hold the power so those are the problems I rEALLY HOPE THAT SOMEONE READ this and Help me repair this on my own Im not afraid to dismantle my laptop what could be the problem is it the battery the fan the charger im planning to reformat my laptop factory defaults or setting install windows but will this help is this a software problem Please help I know this is still a good laptop P S While making this post my laptop shut down TWICE I have to save this to a word file Pls Help nbsp
Turn off laptop take your battery off then hold power buttin down for 20 seconds then plug in charger with battery still off then turn laptop on . what happens ? is laptop running fine
Got aspire 7520 series notebook, who wont boot but on boot flashes caps lock 2 times need to find what problem indicates two blinks
Remove the battery and connect the AC adapter only... does it then boot?
I am having an issue with the sound on my laptop. It will play videos and music, but at some point the sound just....freezes. It is like when a CD has a scratch and it plays the same two words over and over again. Most of the time the screen is not frozen and I can click to exit out or shut the computer down. The sound, however, does not stop when I shut it down or unplug it. It only stops when I remove the battery. Any suggestions would be appreciated.
I have an Acer Aspire 5332 and this used to happen to me but when it used to happen I would open up task manager, go to processes and find explorer.exe, then I would click it click end process then go to the applications tab and click new task, then just type in explorer.exe this fixed it for me and it happened for a while but went away on it's own. Hope this helps you.
So this is my current situation.
I don't know why my download is so low, sometimes it's skyhigh (~60mbps) and sometimes it doesn't even make the 1 mbps I'm hooked on straight to our main modem I even put off Wi-fi and everything and I still have around 5mbps please help
Contact your ISP and tell them your download rates are fluctuating. They have ways of testing for problems with the lines.
I'm not sure why but the sound on my advent laptop seems to be stuck on mute. It plays event sounds, email arriving, closing down etc., but won't allow music or video to play sound.
It's running on Windows Vista and I've tried Function +F5 and F6. The speaker icon, bottom right screen, has the mute symbol'x' by it. When I right-click it denies any audio facility exists.
Please help as I'm stuck in France without a TV.
There is probably a program conflict that occurs some time after boot up. How old is this laptop?
Alright, as the title explains, my computer won't use any form of headset's mic, like at all. Not even its own built in mic, please halp, and I know not **** about computers, so if you could like, explain in ******* terms, I would be incredibly grateful. It might help that I'm a computer gamer, so this would be awesome if you guys would help me. Thank you!
Ive got an acer notebook that dosent like to turn on it will sometimes and when it dose it normally gose in to hibernation you can then get it to turn back on buy pushing the power buton but I gose back to hibernation after 2mins or less I have tryed dischageing the system I need to get it runnig for a project im doing plz help any help apreciated and thanks in advance also I dont no what verstion it is all I no it was bought new in 2008
So here is my problem screen Aspire problem Acer 5920G with Acer Aspire G Acer Aspire 5920G screen problem also I don t understand much about computers bear with me One night I turn off my laptop like normaly the next morning I turn it on for a surprise The screen remained pitch black even though I could clearly hear windows boot up along with other programs like skype popping up Pressed a few random keys and thought I should restart Same thing no reaction from the screen what so ever but I can still clearly hear windows starting up So I browse the internet and here s what I ve tried - I removed the battery held the power button for a while re-inserted the battery turn it back on gt No help - I switch my RAM cards with one another gt Doesn t work - Turn it on and point a flashlight at the screen to check the backlight nada - I check if the magnet for detecting if the screen is up or down is working and it is when I lower my screen it goes to hybernate mode boots up if I click something - I plugged in an external monitor new and functional and press the switch screen button combo but its not reacting the external monitor stays black too It doesn t flicker or anything its giving off no signs of life but I m puzzled because if the screen died it should clearly work on an external monitor which it doesn t Has anyone encountered a problem like this Any ideas on how I might fix it myself and even if I can I m still wondering about what it might be before I send it out to find out the repairs are too expensive I d rather buy a new one nbsp
Try running one memory at a time... first one module, then the other..
Then test with a different hard drive, to see if you can boot to an install screen with your recovery disk...
I recently bought this board(1 week ago) and noticed after installing windows 8 with all the drivers from the disk, that all my USB ports randomly started having problems recognizing certain USB devices such as a wireless dongle and a few wireless mouse and keyboard combos. There were no problems with any USB-storage devices. There are no yellow marks in device manager. I have updated the drivers, to what was on gigabyte their website, but it didn't workout. Did the same after installing Windows 7 to no avail. Have done some research and it seems there are problems regarding VIA VL800 chipset. I disabled it and it seems to help. Although it might not be the case, cause I've only tested it for 2 hours now without problems. But that means there are 4 USB3.0 ports on the back I can't use. Any suggestions please. Thanks in advance
You dont wanna disable a chipset. That is the basically the heart of the PC. The CPU is the brain and the chipset is the heart. Without it, a lot of things can go wrong. I cant seem to find USB3 drivers on the Gigabyte site. Usually when I give poeple drivers from new machines, there is usually a USB 3 driver. Pretty odd. Head on over here and install the chipset driver: http://www.gigabyte.us/products/product-page.aspx?pid=4325&dl=1#driver. On the site it is listed as "Intel INF installation". If this doesnt work, I would recommend sending back the motherboard with a complaint about USB 3 not working. Never install drivers from the disk by the way. Also, the chipset driver I provided may not be 100% up to date, but I am pretty sure it is. I would give you the Intel version that may be more up to date but their download section is down.
My old wireless setup finally crapped out so thought I d try Bluetooth with the longer range One thing I didn t know about Bluetooth at least with this particular keyboard and mouse to a small extent is that after a brief period of inactivity it unconnects or deactivates or whatever and to reactive it I have to type a key and then wait for seconds or more for it to come alive Very irritating especially like when I m trying to sign into something or am Bluetooth problems Keyboard working Bluetooth Keyboard problems on something I ve looked in the app and don t see anything where I can turn that off I don t mind replacing the rechargeable batteries more often if I can avoid that deactivating thing Any suggestions or am I just stuck with that Maybe back to quot old fashioned quot wireless At least those were quot always on quot or Bluetooth Keyboard problems whatever you d call it It s a Microsoft mobile keyboard and mouse There was a small install CD that came with them I don t know if the dongle would make any difference Thanks nbsp
Well, on the hopes there was something in the Bluetooth app that I missed, I went back and took another look.
Not much there, really. But I enabled Bluetooth Network (even tho I only have the BT keyboard and mouse and no other BT devices) and enabled sharing with other BT devices (I guess between the keyboard and mouse and dongle or ?).
None of those seemed particularly applicable when I looked at them before, but
whichever one of those did something, I did a test on the keyboard and at least
yet it hasn't shut off even waiting several minutes.
Actually, would be nice if everything PC / Windows would be that simple!
Hi there I was out of my country for a while and when I returned my family told me that the desktop computer is not working Now when I BIOS Problems try to start the system it works fine until a message appears like quot Unknown CPU detected BIOS update is required to unleash its full power Press F to continue quot This message was always there though and when I pressed F it continued on the starting process However now the F does not seem BIOS Problems to work I had a generic keyboard so maybe I thought it was because of that so I went and bought an USB one and still no progress I wanted to reinstall windows to fix the issue however I cant access bios with the del key for some reason although it is clearly stated that I need to press del to enter bios Computer is like years old and here are the specs Dual Core GHz Intel CPU gb of Ram Asus Commando motherboard W Thermaltake power supply Geforce GT Win I formatted my pc a lot of times and it always worked fine until now bear in mind that this is a computer I put together and also there is no burning smell or shutdowns happening It just stays at that message and none of the keyboard keys seem to work I would really appreciate any help nbsp
Try borrowing a keyboard that has a PS/2 connection. Your generic keyboard might have had a problem. I had to use a PS/2 keyboard in order to enter into bios on an old desktop that I had. It was annoying, but for some reason the motherboard wouldn't recognize the USB keyboard until it booted into Windows. Give this a try and see if it helps.
I have some problems with my frames.
It's not slight, to say the least
Heres the problem: I will be getting 60+ Frames on Max settings, and then it will randomly drop to about 1-10 frames and stay their for 20+ seconds, and go back to normal. Happens consistently. Even when on the lowest settings, the same happens.
EVGA GTX 770
Intel 3770k i5 @ 3.2 GHz
8 GB of Ram (But 32 bit OS so 3.2gb is being used) <---Is this the problem?
Corsair 750w Power Supply
Corsair H60 Cooler
All fans on cards/ power supply is working
I custom build this PC from my Local Microcenter, around 20 days ago.
Games with games w/ varying distance visibility mostly.
Examples: Minecraft, Arma 2.
Your RAM is the bottleneck. Upgrade to a 64bit OS and you should be fine. Make sure you clean install it (Reformat)! That should cure the issue, but if it still lingers, you may have to wait till nVidia releases the official WHQL version of the GTX 770-supporting driver. You will have to clean install that also by choosing the "Custom Install" option --> check the box that says "Clean Install". You should be good to go.
I recently bought a set of tritton 720+ headset and it is not working well. Firstly there is a constant static sound(its very soft so I dont mind if it cant be resolved and it is only noticeable when there is no other sound playing). secondly I have connected it through my optical cable port and the sound isnt working when I set the default sound to the optical port.
Any help will be appreciated
A couple questions to try to help resolve this problem:
What are you trying to use this headset with (computer, stereo, console, etc)?
If computer - what do you have it connected to (motherboard port or a sound card)?
If motherboard connected, what is the make and model of motherboard?
Have you tried to use the headset on another device that has an optical port (ie. Stereo, TV, console, etc) to make sure that the headset it not defective?
Did you buy the headset new or used?
Hello there, this is my first post.
I have been having problems with my computer I believe it to be a graphics card problem.
I use the Nvidia GTX 650 and occasionally after about an hours use the screen goes blue (Not blue screen of death) I believe the card loses connection with my TV (doubles as my monitor) and if I restart it I get what looks to be binary flashing across my screen whilst all the colours of my load up/windows logo are blotchy and not the usual colors
Any help appreciated, Thanks.
Did you do a clean install of the GPU drivers? If you did not, I suggest you uninstall your current graphics driver and do a clean install. I use driver sweeper to clean out the old drivers thoroughly. You don't have to, though. Is your GPU new?
I have to ask, too, have you tried testing your RAM? The symptoms you describe can sometimes occur when you have a bad stick of RAM in your system.
Sorry I couldn't be of more help. But stick around. I'm almost certain the more knowledgeable members can help you out with this.
Hi, I'm trying to install the XFX Radeon HD 5450 1GB graphics card into an Acer Aspire x1301-U1312. So far, I physically installed the card into the PCI express port (x16) but it doesn't seem like it's recognizing the monitor. When I remove the card and plug the HDMI cable back in the integrated GeForce 9200 graphics card, it works just fine.
What's the best solution to this problem!?
Any whom, thank you.
Did you install the drivers before you physically installed the card? That would be my first suggestion. Check to make sure you put it in the PCI Express 2.0 x16 slot and not the PCI Express 2.0 x1 slot. Also, try the DVI or even the VGA connections on the card to see if those work instead. You might have a bad HDMI port on the card itself.
Hi My dad has recently taken to working from home but his laptop struggles to connect to the WiFi but it s ludicrously slow He needs to use the wireless printer and so I told him download the drivers for it it s a HP Photosmart C The download speed was sitting at around Kbps which is ridiculous I suggested connecting it with an Ethernet cable directly from the router It says it connected but it wont connect to the internet there aren t any packets of data being received so I ran an ipconfig test I ll put the results below I network - Windows problems. XP ve tried it on two diffrent router each one is the same Not too sure what to do I don t use XP so don t really know my Windows XP - network problems. way around and its not my laptop so I Windows XP - network problems. don t know who s done what to it He s blaming it on me fiddling with the printer Cheers for any help Ipconfig results Windows XP - network problems. with WiFi disabled and connect via Ethernet cable Windows IP configuration Ethernet adapter Local Area Conection Connection-specific DNS Suffix IP Address Subnet Mask Default Gateway nbsp
So far so good. you should be able to ping these:
ping 10.221.35.1ping 18.104.22.168then try
please report ipconfig /all results too
Hi Everyone Thank you in advanced for your time and help I am experiencing a Problems Printing strange problem and I m at the end of my rope here First of all here are my system specs OS MS Windows -Bit SP CPU Intel Core i GHz Sandy Bridge RAM GB Dual-Channel DDR MHz - - - MOBO Intel DH BL Socket Printing Problems GPU Acer S HL x Hz HDD GB Western Digital WDC WD EALX- BA SATA Optical Optiarc DVDRW AD- S Here are the printers I am using Local Brother MFC- C Printer Default Printer Printer Port USB Print Processor winprint Availability Always Priority Duplex None Print Quality dpi Color Status Unknown Virtual doPDF v Printer Port DOP Print Processor winprint Availability Always Priority Duplex None Print Quality dpi Color Status Unknown Network TOSHIBA e-STUDIO L Printer Port WSD-d c ae - f - cb-b - b b Print Processor winprint Availability Always Priority Duplex None Print Quality dpi Monochrome Status Unknown So I am at work doing my normal tasks when Microsoft Word freezes It becomes unresponsive and is forced to end process After starting it back up again I get a strange error message quot The printer has not yet responded but the Microsoft Office program may be able to proceed without printer information Do you want to wait for the printer quot Clicking yes causes the program to become unresponsive again Clicking no causes it to go back to normal except when I try to print it brings up the default print dialog with no printer selected When I try to select ANY of the printers every single choice will cause the program to freeze and become unresponsive again So I took some steps to try to troubleshoot after looking around online but did not find much help I tried not in order -Uninstalling all printer drivers and reinstalling them -Disabled and re-enabled Printer Spooling service -System Restore -CCleaner - clean-up amp registry repair -ComboFix -Changing default printer to local amp virtual printers -Installed Office instead won t even start-up due to printer issue The weird thing is I can print fine off of programs like notepad mspaint wordpad etc and test pages all print out fine too However certain programs like Thunderbird Chrome NitroPDF any Office program etc all freeze up when I try to print I m hoping someone might have some insight on how to fix this Thank you nbsp
First, quit all programs. Use cmd->notepad to open a new text file, type some gobldee gook on 2-2 lines and <ctl>p to print it - - DOES IT?
If so, the print driver is fine and so is the system - - MS Word needs to see a new default printer.
Hi guys I m a bit desperate right now Here s the thing I have an acer g English bought in the Netherlands out of warranty original HD GB western digital included with windows home premium The hard disk is dying Everytime I restart windows demands a launch repair that takes HOURS otherwise it won t boot and will restart I bought a brand new Momentus XT GB It was fairly simple to remove the original disk and replace it physically Problems start with trying to install an OS on the acer -First off I went to the bios and set it to boot up first with the optical drive so I can use the recovery DVDs that I created on day one when I purchased the laptop It just doesn t doesn t do anything when I put the first one and restart Only the prompt blinking and the disk even stops spinning -I made New hard on drive 7 5740 can't windows acer aspire install sure the DVD drive reads discs I put back my old hdd waited till I can use windows again hours after launch repair and tried to read many DVDs and they all seem fine -Back to New hard drive on acer aspire 5740 can't install windows 7 the new drive installed No recovery I researched a bit and found out that erecovery only works New hard drive on acer aspire 5740 can't install windows 7 on acers with the quot hidden partition quot on the disk that came from factory Gotta find New hard drive on acer aspire 5740 can't install windows 7 another plan -I downloaded a copy of windows GB and burned the iso file on a blank DVD with hopes of installing it and then activating it with my key - Inserted Windows DVD created with the microsoft tool Same problem no reading I check again if my optical drive can read at all checked it reads DVDs - At this point I m not sure what else to do What I want All important files I had in my old hard disk are backed up somewhere else I just need to get rid of the dying disk and replace it with my brand new hd and install windows on it and then activating it I just can t seem to do this any thoughts would be appreciated Thanks nbsp
Try formatting the new drive using something like this:
then try and install Windows 7
On my Apple IPod, my home button is like stuck down, it will not work no matter what type of pressure I apply. Am I screwed? or can it be fixed(take to apple store maybe)?
take to apple store maybe?Click to expand...
at least talk to them
I am having problems with a delayed keyboard and a mouse that lags and won't click properly. Sometimes it won't click at all, other times it clicks and the computer won't register that it's clicking.
I have run all test to ensure it is not a malware and was directed to this forum for assistance.
Seems like your computer is slow. Open up Task Manager and show us the Processes tab, ordered by descending CPU usage.
Hi guys this is my first post have just finished putting together my first pc - when I turn the pc on the lights are flashing fans are spinning I do not hear a BEEP however keyboard and First Build Problems mouse lights are on as expected The problem is my monitor is not connecting to the pc quot Signal not found quot is the message that appears on the monitor before it goes into sleep mode I cannot see the BIOS and therefore cannot install my Windows OS The following is the list of components in my pc build - Asus P -I H Motherboard - Intel i - LGA CPU Ghz - Corsair GB Vengeance DDR - Gigabyte ATI HD - Western Digital TB SATA - W Corsair CX PSU - Windows -bit I have tried using VGA and HDMI cables I have tried using different First Build Problems monitors which First Build Problems have worked fine when I tried connecting them to my laptop Therefore I determine there must be something wrong with my pc but I cannot pinpoint the problem Any ideas or suggestions will be much appreciated Cheers nbsp
Double check all connections on your board. It's not hard to miss a cable and forget to plug it in. It also isn't hard to plug some cables into the wrong spots on the MOBO. Make sure everything is secure and in the right place.
Hi I am having some issues with my PC and would really appreciate any insight First off my setup CPU AMD Phenom II X rd core unlocked with Crossfire Problems 5770 ATI HD Performance CPU-Z says it runs at Ghz under full Problems with ATI 5770 HD Crossfire Performance load Memory Gb DDR Video Two Sapphire Radeon Problems with ATI 5770 HD Crossfire Performance HD GB -bit GDDR cards in Crossfire the nd card was added maybe a months or so after getting the first one this goes to my receiver and Problems with ATI 5770 HD Crossfire Performance my TV running at x Mobo ASUS M A TD EVO AM with PCI-e slots x x HD My main one where my Steam files are is a WD Caviar Black TB rpm OS Windows Catalyst Control Center CCC v hardware info shows both the primary and linked adapter primary running at PCI-e at x the linked card running at x I just updated from CCC or and I have had Crossfire enabled every since installing the second card With CCC and every previous version of CCC I ve had about of the time when I booted up from shutdown I d have to go back into CCC and re-enable Crossfire for some reason it would be disabled on restart more often than not I ve only had for a day now and I have not yet shut down my PC My main issue is basically I have never really noticed any difference from running in Crossfire vs running one card when gaming Crysis BF Portal others I think I am fooling myself into seeing a difference but sometimes I would start up my system start gaming and it seemed normal then remember that I didn t check if Crossfire had been disabled so I would recheck and see it was disabled and so I would renable it and then go back to gaming and not really notice a difference Does that make sense And sometimes it would even seem worse So I bought Hitman Absolution on Steam not pirated and noticed that it had benchmarking which I ve never done These are my in-game settings Resolution x Fullscreen checked Refresh Rate VSync checked MSAA x Exclusive Fullscreen checked Aspect Auto Quality Custom Shadow Medium Texture Quality Normal Texture Filter Anisotropic x Reflections Medium FXAA checked Global Illumination unchecked Tessellation unchecked Level f Detail Medium Depth of Field Medium SSAO Normal Bloom Normal With my previous version of CCC my FPS averaged around but I didn t write the exact numbers down I went to the AMD website and saw a new CCC version and the new CAP with Hitman Absolution I uninstalled all previous CAPs and ran the installer to remove my previous version of CCC Then I rebooted made sure display drivers were all uninstalled and installed I ran benchmarks with Crossfire on and off then installed the new CAP and ran benchmarks with Crossfire on and off each three times quot A quot quot B quot and quot C quot Here s my avg FPS Crossfire Enabled no CAP A fps B fps C fps Crossfire Disabled no CAP fps fps fps Crossfire Disabled CAP installed fps fps fps Crossfire Enabled CAP installed fps fps fps So it almost looks like my best settings were with Crossfire disabled and no CAP So Why I mean if I enable Crossfire and I do what AMD suggests and use the latest CCC version with the lates CAP I get - fps I am not too technically inclined so I was thinking I either have a faulty nd card although CCC says it s linked or my x PCI-e slot is slowing everything down or I really don t know If you have any ideas suggestions please let me know nbsp
Try clean installing the drivers.
1) Uninstall the current drivers with this tool: http://sites.amd.com/us/game/downloads/Pages/catalyst-uninstall-utility.aspx
2) Then reinstall the 13.4 driver after you have uninstalled previous versions with the tool above.
I never go it, what exactly is CAP? Also, isnt it bundled with the drivers now?
My sister in laws Acer aspire 5750z-4885 was recently sat on and the screen is cracked. I was going to replace it for her but before I order a new screen I was wondering if it is even just the screen and not something else that I cannot repair. The laptop since getting the screen cracked will shut off after powering up in about 4-7 seconds or so I haven't used a stop watch lol.
I am wondering if perhaps there is a short or some other dmg caused by the screen being cracked that will not be remedied by replacing it. I have limited experience with cracked lappy screens. Thank you all so much for any and all replies I love this board and it has helped me many times in the past.
Yes, the cracked LCD screen can be the cause of the shutdown. Replacing the LCD panel is not that difficult for someone experienced, but for you it might be too much. You have to disassemble the top cover without breaking the plastic. The video cable might not be included with the new panel, so you would have to use the old cable. The cable connection to the panel is very delicate...
I've been having these problems for maybe 3 days. First thing was it took longer for my computer to boot up now whenever I finally able to logg in either my icons on my desktop disappear with my start menu and the appearance of my start menu and other stuff from computer look like they are in safe mode is there anything I can do to fix my computer. I can't back up my computer to a time where it was working perfectly can anyone help me?
Download Malwarebytes: http://www.techspot.com/downloads/4716-malwarebytes-anti-malware.html and run a full scan. Tell me the results and post the scan log. This will determine if your PC has an infection.
What antivirus do you use? Can you post your system specs?
Thanks,..this laptop acer Aspire 4551 start but the display stay black (no video) I'd like to flash the bios,... I've seen some videos but I don't understand very well ,...could you to teach how to do ? step by step please......GOD BLESS YOU
Well, can you even boot up into the machine? Or is it all black?
Hi, I have been having some technical difficulty's lately with my Acer ASPIRE's monitor. I will be watching a video, doing work or making one of my games when my monitor will go to black-and-grey lines. So far, the only way to postpone the problem is (Once Problem has occurred) to hit the CTRL-ALT-DEL keys, which will bring to the Windows 7 Options Menu. Then just close that... But it will happen again and the fix is rendered useless I then have to restart my laptop. Any ideas? Please comment!
I think this may be a graphics card issue. Please tell me your system specs (CPU, Graphics card, OS - 32 or 64bit).