Windows Support Forum

Outlook email account will not send or forward moves to draft messages

Q: Outlook email account will not send or forward moves to draft messages

HEllo out there ,

I am experiencing issues with my Outlook accounts I have two attached a default one for my Microsoft account and a secondary one for my wife.

On my new pc with win 10 I cannot send , forward emails the message I get back is they have been placed in the drafts folder then that's it. I cannot do anything with them.

Interestingly I have the same win 10 on my old computer and they work fine I suspect that my new one has updated and caused the issue.

The only difference I can see is I have Office 2007 on the old pc and Use Libre office on the new one would Libre cause an issue with outlook ?

I have run sfc/scannow with no success.

Any help would be appreciated.
Relevancy 100%
Preferred Solution: Outlook email account will not send or forward moves to draft messages

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

Relevancy 37.41%

Hello everyone!
I'm having issues with my mouse seems to randomly move on its own. It doesn't happen all the time, It's rare for it to occur outside a video game. When I'm playing it will do and move to the exact same place everytime. It press buttons and move the mouse to one corner of the screen
this may happen 2-3 times within a 40 minute game.
Anti malwarebytes can't find it, I tried cc cleaning, my mouse is brand new and has been working beautifully until just this week.

I'd be grateful for any help or advice


A:Mouse moves on it's own

Have you tried any other mice?
Relevancy 36.98%

I have a Lenovo Ideapad Z575 and whenever it moves it turns off and reboots. This problem happens when it is on battery and plugged in. I know that it must be something wrong with the hardware but what is it and how do I fix it. Thanks for all of the help

A:My Laptop shuts off when it moves

So any time the laptop is moved whether it is plugged into it's charger or not, it shuts off?
Relevancy 34.83%

I have downloaded a program called Anomos, it tells me please forward your ports so the program can work, 5061. Ok so I go into my century link modem and it wants a ip address to forward the ports what ip address do I enter?

A:How do I port forward the Anomos program?

The LAN address of the system you want the data to go to.

It must always be the same address, so you need to make it so using
Address Reservation on the router OR a static address on the target machine (not recommended for laptops).
Relevancy 33.54%

Please excuse me if Forward modem Port Motorola 100000 SBG6580? on surfboard I ve mis-posted here or need to supply other info I m relatively new here I have created a static IP for my PC running Win and was attempting to quot open quot a port on my motorola surfboard modem SBG I have understood and followed the steps on the Port Forward website http portforward com english routers port forwarding Motorola SBG Vuze htm up until it says quot Forward Port on the Motorola SBG quot The image shown above on that page is actually the modems Firewall page not its Forwarding Forward Port 100000 on Motorola surfboard modem SBG6580? page it then says Forward Port 100000 on Motorola surfboard modem SBG6580? Forward User Defined Port on the Motorola SBG We will list a series of lines here that will show you exactly how to forward the ports you need to forward This program requires you to forward the following ports Go ahead and enter the settings shown above into the Port Forwarding menu The display below that shows where theoretically you would enter information but that actually looks more like the Port Filtering page then the Forwarding page Local IP Adr Start Port End Port Protocol Enabled It then says quot When you re finished click Apply near the bottom of the screen to save your changes quot My Questions I guess are How the Hell do I forward port Am I even in the right location Thanks in advance for any help anyone can offer me and I apologize if it isn t clear or lacking information this is all rather new to me nbsp

A:Forward Port 100000 on Motorola surfboard modem SBG6580?

I don't think there is a port 100000. As far as I remember there are only 64k - 1 ports available per IP. This does look like where you'd do your port forwarding, but you'd need to specify the local IP address to route the traffic to.
Relevancy 26.66%

I changed my power supply (old one's dead), and now, when I turn my pc on, it won't send video to the monitor.

Its a gtx280, the green light is turning on (so electricity doesn't appear to be the issue), and the gpu fan doesn't turn on.

I cannot access the bios or anything else software related because the motherboard doesn't have integrated video.

A:GTX280 won't send video to monitor

Hi Enrique,

Minimum System Power Requirement on a GTX 280 video card is 550 W. Check the new power supply's specifications to confirm. Also, is the new video card compatible with your system?

Click on the link below for specifications and details on the GTX 280.

Please reply if you have further queries.

Thanks and regards,
Babita G

For easy access to drivers, manuals and product updates, please visit ourSupport Site .
Relevancy 26.66%

Hi I have a u8850 and my texts come through twice each time, anyone got any ideas how to change it back? billy

By the way its a huawei and it goes hot to touch while charging as well and its about 3 month old
Relevancy 24.94%

I run Windows WD MyPassport TB Problems first started about halfway into a Vuze transcode for a movie the randomly External WD HD denied messages. giving me access My started is original file and the transcode folder are both on the drive First it wasn t letting me My WD External HD randomly started giving me access is denied messages. right-click delete rename the option for those wasn t on the right click list but everything else was I restarted and still the same I did the Check Disk in the HD menu I ticked the recover bad sector box and it wasn t moving didn t feel like waiting so I stopped it My WD External HD randomly started giving me access is denied messages. and afterwards anything I tried to do gave me quot access is denied quot I forgot that I had formatted it into ExFAT so my TV would recognize it and I had movies files were gig in size which might cause problems It says under the security tab it is quot unable to display current owner quot I would really rather not format it s not even letting me select it for lack of privileges but if that s all I can do then so be it It s saying it has no used space or available space its half full nbsp

A:My WD External HD randomly started giving me access is denied messages.

I unplugged it and plugged it back in and it seemed to work, it said there was something wrong with it still and promted me to do another check disk scan which said there were no problems (I didnt select the "bad sector" option) (durr!) but I remember it doing something similar before, should I format it back to NTFS, Is that what is causing the problem?
Relevancy 23.65%

I have an: DIXONH55ITX Socket 1156 Advent Firefly FP 3104 System Motherboard

I'm looking to upgrade for 2 main reasons.

1.) Upgrade my Ram, (as the limit of ram for this motherboard is 4gb.)
2.) More than 1 PCI-E slot. (There's only one on this motherboard.)

But my main question is:
What do I need to take into account when upgrading my Motherboard?
(Compatibility issues etc.)

Also any motherboard recommendations (under 200). As I'm planning on upgrading my computer to a gaming rig.

Any replies would be greatly appreciated.

A:What do I need to take into account when upgrading my motherboard?

Not quite understanding you. Are you wanting to keep all other parts and just upgrade mobo, ram and gpu?:

It sounds to me like you are wanting to build an entire new system. If so, give us a budget and what should be included (monitor, windows etc.).
Relevancy 28.81%

hi all my daughter has told me she used to press the email button on her laptop and access her emails now it doesnt access the emails sorry not uch info .but does anyone have a clue what is wrong or what I could do or try thanks

A:Can't access email from email button

Does the laptop come w/ a program to customize keyboard settings? Maybe that a look at that. My Logitech keyboard came w/ a program called Setpoint which allows me to choose what email program to open when the button is pressed. I had an eMachine keyboard w/ an email button that opens up the default email program. So that's something else to check. Maybe the computer forgot what the default email program is.
Relevancy 20.21%


I have windows XP. There are instructions on the net to use NTBACKUP.MSI. Even though I downloaded the file the computer can't find the file.

Whats the best way to back up to a portable hard drive on a regular basis?


I also would like to back up my address book to the portable hard drive.

Thanks Heaps

A:Back up XP + email addresses to portable hard drive

What email program are you using?
Relevancy 18.06%

Im trying to set up an email in outlook 2007 with ms exchange 2003. Under the exchange proxy settings, i set the connection settings to RPC.domain, and check the box that says "Only connect to proxy servers that have this principal in their certificate: I use the "msstd:rpc.domain

A:MS Outlook connection with Exchange 2003

Sorrry, I accidently posted before i was finished. but I get an error message saying "the connection to ms exchange is unavailable. Outlook must be online or conncected to complete this action. Can anyone help me with this. Much appreciated.
Relevancy 23.65%


First of all, I dont know if this is the right spot to ask about hosting, but since Techspot has helped me with a lot of computer related problems, I thought Id give it a try...

Anyways, Im about to buy a hosting plan from Hostgator, but I want to use one account to host at least 3 different sites (top domains, like, and I know the reselling account would be the most effective, but I dont need to have a different cPanel for each user.

Can this be done with a Baby plan? Im going to buy domain names from another company, but I guess that doesnt matter. Im new to all this hosting stuff, so any help will be appreciated.


A:Hosting several sites on one account

that's all up to the hosting site policies - - don't hold your breath.

the Apache2 web server does this with <VirtualHost: ipaddress:80>
Relevancy 21.07%

We host a domain '' with and use the same to provide us with emails to all our staff. The 'Servie Provider' provides facility to capture the incoming emails to another account. My concern is the email that our staff send from the individual Pc's in the workgroup/domain which I need to monitor and filter anly selected email. I would like to mention an example the emails that our sales staff send to suppliers must be blocked while to the cutomers should be allowed. Additional features to the device is welcome.
Relevancy 32.25%

Hi Everyone- when Asus 1015, typing moves Cursor when cursor jumping Eee typing on a new Asus EEE with Win the Cursor jumping Asus Eee 1015, cursor moves when typing cursor will suddenly jump backwards to an earlier spot in the text This happens a lot and makes it difficult to type anything I googled and saw this problem for many systems and OSs but it seems like mainly a laptop and netbook problem some people have erduced sensitivity on touchpads or have updated touchpad drivers or have Cursor jumping Asus Eee 1015, cursor moves when typing installed a program that disconnects the touchpad when the keys are being used We know we are not touching the touchpad accidentally you can really perch your fingers way above and the jump still happens We have decreased the sensitivity on the touchpad and the jumping still happens We also have an Asus EEE Win XP for almost a year with absolutely no cursor jumping Any info specific to this set-up I would love to hear any insights before I go into a long routine of upgraing BIOS upgrading touchpad drives etc nbsp

A:Cursor jumping Asus Eee 1015, cursor moves when typing

As the PC is new I would return it under warranty as this is most likely a hardware issue.

The only quick fix that might work is to reinstall the touchpad drivers from the Asus site. You could also check in the touchpad settings to see what is set for making the cursor disappear during typing, change the setting from whatever it is at present and see if that helps.
Relevancy 26.66%

I read one of my college books last year that you can, I recently spilled some soda on my keyboard and now some keys are super stuck. I want to run this keyboard through but im scared lol.

A:Can you really send your keyboard through your dishwasher?

uh ... o_o

I would say no, since any IC chips would burst open. Most keyboards (*most*) don't have any capacitors, but the IC chip(s) would surely die. lol

Besides, you would almost have to take it apart to get it entirely dry so you might as well disassemble the keyboard to just clean it by hand.
Relevancy 25.8%

I was just wondering if anyone can help me with something?

Basically I'm trying to sort out having some automatic messages pop up on the computers in the public IT room where I work as we're having problems with usage and restrictions so we want to be able to tell the public easily what they can and can't do especially as they seem to have complete disregard for the signs that are up everywhere e.g. no eating/drinking etc....

The computers are all on a simple LAN (I think), but after a quick google I had a lot of confusing stuff all trying to promote intranet programs etc....

I'm fairly savvy, just want a push in the right direction.

Thanks guys!

A:Need Automatic Messages to pop up on public computers on a LAN

Can't give you the details (as i've never used it myself) but you might conider using the Windows Alerter Service.
> It was intended to set administrative alert pop-up messages to machine on a network
> You need to assure the Alerter Service is Enabled on each machine (by default it's Disabled)
> YOU MUST BE CAREFUL that your External firewall has the alerter service port closed!! (you'll have to look up the port number. i dont recall it) BECAUSE:
===> SPAMMERS on outside networks used to send messages to users on internal networks by spamming messages to the open port used by Alerter Service

But if that port remains DISABLED at the WAN interface level, i think it shouldn't be a problem
Relevancy 25.8%

i want input jack 4V of a signals mic to send circuit +/- to Design/modification to set up a circuit which senses electric signals of the body electro-cardio signals Design/modification of a circuit to send +/- 4V signals to mic input jack and sends them to an iphone mic jack I have already downloaded and hooked up a circuit to detect heartbeats you can see the circuit diagram at the following link I am excluding http otherwise the website will not accept the Design/modification of a circuit to send +/- 4V signals to mic input jack message sites google com site hearts Design/modification of a circuit to send +/- 4V signals to mic input jack site home technical-setup i get a reasonably reliable signal of amplitude approx - V I have yet to check the exact value with a multi-meter so what I would like you to comment on is can there be an even better circuit smaller cheaper to hook-up the setup modification required to input this signal into the mic jack of the iphone I may mention that this is in connection with a project i am working on as part of my masters degree in Sydney and would be glad to acknowledge your contribution I need to finalise this electronics part of the design ASAP so if possible then you can please message me directly on my gmail address as well maksdesk at gmail com Thnx in advance and regards nbsp

A:Design/modification of a circuit to send +/- 4V signals to mic input jack

Hi Maksdesk, welcome to our forum and I would like to be able to offer a constructive suggestion but I'm sorry but I do not have any knowledge of this field. Hopefully someone else will be able to help, there is lot of knowledgeable people out there.
Relevancy 20.64%

Right ok, I have a probably simple request, but its baffling me. I need to have my iPod and PC download emails. But I need it so that, if i delete an email of my iPod, it isn't there on my PC, and vice versa. But I need it too so that if I download the emails to my iPod, I can still access them on my PC.

I'm using a firefox extension called SimpleMail, that has options for POP3 and IMAP, and is useful and quick compared to thunderbird for me.

I've tried it, but just can't figure it out! A detailed step-by-step guide, would be HUGELY appreciated. Probably put this in the wrong section too, but its the best I could think off.

A:Email setup help needed, for iPod and PC!

Basicaly any email account with IMAP would be able to do that: Gmail, MobileMe & even Yahoo! offer such services.

Emails are available on all the machines using the IMAP account & even your replies are copied over to all the machines so you can still access them from another machine than the one where you wrote them from.
Relevancy 25.8%

I have an AMD Athlon x Dual Core Processor with a Western Digital Hard drive WD Caviar SE My Error Fastbuild and Utility Messages computer went Fastbuild Utility and Error Messages through this process where it finally just stopped starting up for me I finally gave up and formatted my entire Fastbuild Utility and Error Messages computer I thought initially that it was th hard drive then I saw one of my ATA Serial cords was broken I replaced that I went to reinstall WIndows XP onto the computer and it would get part of the way through setup then went it asked me to push enter to install it would tell me no hard drive disks were found I put in my SATA drivers disk and it did nothing so I downloaded the Data Lifeguard Diagnostics from the WD website Now whenever I start up the computer it is saying Reboot and Select proper boot device I also have the option to enter the Fastbuild Utility which I never saw on startup until recently I have no idea how to set up the array and no clue what s wrong with my computer Any help or suggestions would be nice nbsp

A:Fastbuild Utility and Error Messages

what motherboard are you using
Relevancy 26.66%

Hi all, I am running Windows 7 and I.E. 8 and Chrome and have tried Firefox too and have the same problem.

Everytime I type, click a link, navigate to a new webpage etc I get the error 404 message. The irony of this is that a simple refresh on the page once the error 404 message has appeared then lets the page load as normal.

I cannot for the life of me think what is causing this, our network runs through a router with my PC and my sisters wireless laptop the only two connected devices.

Any ideas or help would be much appreciated, this is happening in all 3 browsers mentioned above.

Many Thanks

A:Error 404 messages

You might benefit from doing a search of TechSpot for the 404 error responses of the past.
Relevancy 23.65%


What happen to my rapidshare premium account... almost 5 days, download is very slow...15kbps and finally gone... Normally, i got 212kbps.

A:Rapidshare Premium Account

Tell us more. What is a Rapidshare Premium Account?
Relevancy 18.06%

I am new to Exchange Server 2003 and I have a friend with a network server that I don't know how to re-establish a user to the network. I moved one of his non used computers to this station and now when I try to log in the user I get the error that the name can't be verified because Outlook is not connected or online. This computer used to be online with a different user. Can anyone tell me the steps to check this? Thanks.

A:Outlook not connected in Microsoft Exchange Server

You would benefit from the server handbook or an outlook manual... too much to explain here in usable terms, methinks.
Relevancy 37.41%

A user has been using her laptop for several years and uses Outlook for her POP3 email.
When we installed a server and joined her laptop to the domain she was unable to see her email without logging out of the server and logging back into her local account.
How do I let her domain profile be the same as her local profile?

A:User loses access to outlook email after being joined to domain

You can't, it's considered as a different user. Just take the settings from Outlook and import them into the other account name.
Relevancy 27.09%

I have a PCISOFTV92 modem and when i try to send a fax from my PC it always returns "Line Busy" I have tried to manually dial the number from the phone and it always answers, can anyone suggest a fix?

A:Send faxes from PC

Look at this:
Relevancy 35.26%

Ok, for some xbox games i can't join any partys or join any rooms because it says my NAT is to strict, or its not port forwarded... I'm not sure how to port forward but I know how to get into my router settings:

Can someone tell me exactly how I can port forward for my 360?

Here is what i see but i'm not sure what to do:

I've read a guide on how to do it and i did this:

But it still doesn't work, I can enable an option called " disable NAT on the router and turn it into an Access Point.
Enable Access Point Mode?" But i heard that that is dangerous and can cause virus's. my modem is a Speedstream 4200 Ohio. Thanks

A:How to port-forward on WBR-2310

The IP address you have listed is your router address. You need to find out what your XBOX IP address is and plug that into those boxes. This should correct the problem.

I don't have an XBOX so I don't know how to find out. Sorry.
Relevancy 35.26%

when i listen to music i set the volume bar in the middle when i seek forward or backward the sound rise to max although the volume bar is at the same position as i placed it (it doesnt move but the volume changes)

I have A Creative Sound Blaster Audigy soundcard

any Idea ?

and yeah ,when i go to the device manager there is a missing thing (Multimedia Audio Controller) i tried to fix it but i couldn't !

A:Volume goes up when I seek forward

What is your computer's make and model?

"there is a missing thing (Multimedia Audio Controller) i tried to fix it but i couldn't !

This has to be fixed and it could be the source of your problem. Try deleting this entry and see if the Multimedia Audio Controller is reinstalled properly after a computer restart
Relevancy 18.06%

My smartphone used to sync with the office Exchange Server, but I now want to sync my Outlook contacts with my home PC using standalone Outlook 2003. My PC runs XP SP2 and ActiveSync 4.5. Smartphone is Windows Mobile 6 Standard.

It looks as if I cannot sync Exchage Server contacts to standalone Outlook - if I try to switch to synching with Outlook it tells me the contacts on my phone will be deleted. Is there a safe way of diong this? I would rather retype all my contacts from the phone screen than risk losing them - I can no longer access my former office's Exchange Server.

Thanks for any help - Firepig

A:ActiveSync, Outlook and Exchange Server

Try updating XP to SP3 and check for other Microsoft Updates too, while you are at it
Relevancy 23.65%

i got windows xp pro i was missing around with computer management and did something now i cant log into my mind administrator account i try to reboot on safe mode i get the administrator name but i try to create a another accuont or change but i get a asses denied i try i to Ctrl Alt Delete and nothing i think i my have deleted something and messed everything up ..when i go to my user account from control panel i dont see a quest account or administrator all i see is that small picture off a bass guitar and its says administrator but under it says guest account i have no privilege for nothing . how can i change that guest under admintrator account ?

A:Administrator account problam

Microsoft's Windows XP Professional Repair Install step by step

Microsoft's Windows XP Home Repair Install step by step

Vista Repair: (index page) (guide)

Or use UBCD to back up your data and re-install clean
Relevancy 20.64%

Is anyone out there who can help me? I am registered with Incredimail for emails & I need to change my email address with them & although I have tried every which way to find out how to do this I cannot find a link within incredimail.
I would appreciate any help I can get as it
is driving me crazy. If I am unsuccesful I will have to remove Incredimail & go elsewhere. Thanks to anyone who can give me an answer.
Relevancy 37.84%

When composing an e-mail in Outlook 2007 (Vista), the typing never wraps round to the next line; it types as one continuous line from left to right. What do you do to change this back to multi-line?

Thanks for you help.


A:Outlook 2007 (Vista) email page layout

Which format are you using to compose the message? (HTML, Rich Text, or Plain Text?)
Relevancy 21.07%

every time I log into my email God save the queen plays and repeats over and over
I have an old amptron 2000 laptop with realteck audio. Never a problem till today.
I ran spy bot, AVG, adaware,CC cleaner, looked over my shoulder, repeated including re-booting and still the refrain goes on. Thanks in advance for any help.

A:Email Sounds distress

Are you kidding? What email program are you using?
Relevancy 18.06%

I hope I'm putting this in the right place and I know it's probably I really simplistic question, but here it is:

I have Comcast Cable internet via modem that connects to my DLink 4500 gaming router. I have a PC(wired) , Laptop (wireless), another PC(wired), and XBox360(wireless) all connected to the Cable internet and home network.

I was thinking about changing my Comcast mail to Outlook express -- is this a good Idea? Can it be done? If so how do I do it? If I do it will all my mail accounts go through Outlook or can I just do mine and not my son's and husband's? Sorry again if this is not the place, but I figured you're used to newbies not knowing where to post. Thanks

A:Comcast Mail to Outlook Express

Your Comcast email is known as a Webmail solution, while Outlook, Outlook Express
are Pop3 Email Clients.

All you need is to configure your Email Client to access the Postoffice @ Comcast;
you will actually still be able to use BOTH

The Comcast settings are here
Relevancy 21.07%

Good morning I have a HP Pavillion Desktop computer at home email with Trouble and I recently signed up for Comcast high-speed internet Trouble with email which is run thru a cable modem The internet works great and is very fast Here is my problem I cannot do any kind of email If I try to click on the login button to sign in to our account it says quot page cannot be displayed quot It does this if you try to do any kind of email This is the first time that I have ever had this problem on my computer We didn t have internet on the computer for about a year and a half I Trouble with email also went to Apple com the other day and tried to download the latest versio of iTunes and it said quot page cannot be displayed quot Someone suggested turning off my Windows firewall I really didn t want to do that but I tried it and it didn t solve anything My Norton Security is out of date and needs to be updated but I don t know if that would have anything to do with it or not Any help would be greatly appreciated Thank you nbsp

A:Trouble with email

You are a little vague on specifics.

Did you create a new Email account with Comcast during the install?

Are you trying to use that account or an 'old' account on another ISP?

Do you also use a router? Kind/type?
Relevancy 18.06%

Every time I compose a new message in Outlook Express and use MIDI music as a background the SW SYNTH in audio gets knocked back to zero. This only happens in OLEXP, toherwise MIDI's play OK.
Running Windows XP Pro SP3 OLEXP 6.0

A:Outlook express affects audio control

What is your computer? Make and model?
Relevancy 36.98%

Occasionally my mouse pointer drifts across the screen without the mouse moving at all. It is a wired ms scroll wheel mouse. Occasionally the scroll feature kicks in and a web page will scroll rapidly up and down when I move the mouse. Multiple clicks and mouse movements usually get it under control.
The drift movement runs right to left and then stops before the edge of the screen.
Sound familiar to anyone? An annoyance mostly. Not in any particular program.

Is there a fix?


A:Odd mouse behavior - moves on its own

See if the thing is plugged in firmly. If you are using a USB-to-PS/2 adapter, try without. Try with another mouse?
Relevancy 21.07%

Hi I am a small business owner running laptops and a desktop pc one of the laptops is running xp although will hopefully upgrade it to vista soon I am looking to purchase a NAS device mostly for media sharing and syncronization between pc s but would like to be able to access my email accounts via outlook NAS email knowledge and lacking. although would consider another product with same basic functionality eg local storage tasks calendar etc I am using googlemail for all my NAS and email knowledge lacking. accounts I am aware that there are several NAS devices out there that let you connect and manage NAS and email knowledge lacking. files remotely over the internet It seems that to me that it should therefor be relatively simple to have all outlook or alternative files stored on a remotely accessible NAS to synchronize accross all pc s automatically on login hereby removing the need for an expensive hosted service such as MS exchange I have googled just about every variation I can think of to find the relevant information but to no avail I am fairly savvy for an unqualified home user but lack the deeper understanding of NAS and outlook to get through this one on my own If this is possible please give some advice on setup and the best hardware fro the job Lastly if the NAS doubled as a print server that would be cool too MAny thanks in advance for your help Best regards Don nbsp

A:NAS and email knowledge lacking.

NAS devices (Network Attached Storage) just attach to your LAN using the File Sharing,
Map Network Drives capability.

1) Internet access to one of YOUR LAN drives is a big security hole, so that's not the
right approach.

2) depending upon the software you use to send/receive, sharing email files can easily corrupt them and you lose everything.

If I wanted Internet access to my email, I would use a Webbased email solution
(like gmail), configure it to retain all down loaded email, and the use my pc
to access the gmail pop3 account.
Relevancy 18.06%

Help! How can I share Outlook 2007 Calendar on 3 networked computers running vista home premium? Don't wanna spend 700 bucks for Exchange Server. Can it be done?

A:Share Outlook Calendar

For workgroup users (ie those without a domain controller), it is done by sharing
each appointment;

create or open an appointment
click the Attendee Availability tab
at the lower left, click Invite Others
enter the name of the Contact and click find
when selected, click Required or Optional
repeat for all attendees
when done, click OK
as each Contact receives the appointment by email, they accept or decline the schedule
their calendar and yours are updated
and the status of all can be seen using the radio button Show Attendee Status
Relevancy 21.07%

Can anyone guide me about Video email marketing? Is it possible to customized banners and links with my video emails?

A:Looking for Video Email Marketing

Re:Looking for Video Email Marketing!

Video email marketing is a new tool in market which allows the entrepreneurs to access video email facility with the use of microphone and camera and communicate directly with the end customer. It harnesses the power of video in conveying emotions, tone, and energy while leveraging the flexibility of an email- like system. It increases the market value and credibility of the user. You can get more information from and yes it is very simple to customize banners and links with the video emails.
Relevancy 18.06%

Lots of valuable information in that file I'd like to access. I was able to create a new Outlook file in safe mode so I guess the program is OK.

It was suggested to me recently the cause may have been due to me having Microsoft Service Pack 1 at the time. I had not updated to Service Pak 2 (which I now believe has been updated to Service Pak 3). Has anyone had experience with this and, if so, do you think there's a chance that if I update my Service Pak that I might still have a chance of recovering the data I had in my original Outlook file?

A:Still unable to open Microsoft Outlook

I dont think just upgrading to service pack 3 would do any good.

May be you need some more luck there.

Hope you get the help you need

Relevancy 26.66%


I am trying to send emails via word 2003, but for some reason I do not have a send button, Can someone tell me step by step what to do to get it.


A:Why dont I have a send button

For the Send button to be available, you must have an e-mail account set up in your Microsoft Outlook profile. You might have chosen not to add an e-mail account when you installed Outlook, or you might have canceled the E-mail Accounts wizard.

Or Right Click on the Outlook Toolbar (grey area), and select Standard Toolbars
Relevancy 20.64%


I'm older, as are my eyes, and the type in HTML emails is difficult to read. I changed Outlook 2003 to display everything as Text so I can enlarge using my scroll wheel but the tons of hyperlinks detract.

My Windows menus and Firefox are 14 point for easy reading but I can't find an Outlook setting that applies to HTML messages.

Your help will be appreciated.



A:Enlarge type in HTML email

Have a read of this thread:
It states Outlook2007, but should be similar (if not the same)
Relevancy 26.66%

hey all

not sure if this is the right place to post this but if not please move it to appropriate place.

my computer has been shutting down and rebooting itself for a few days now. When it reboots I get this error message and it runs fine for a few hours

BCCode : 100000d1 BCP1 : FDD23834 BCP2 : 00000002 BCP3 : 00000000

BCP4 : AA158A80 OSVer : 5_1_2600 SP : 2_0 Product : 768_1

I got a program called ErrorSmart the fixed a bunch of errors on my computer yesterday and it's still shutting down on me with the same message. Not sure if it was the right program to get but nonetheless it did find errors. Any other suggestions on what I might do to fix this problem? thanks

A:Error messages

Hi hollowed454 and welcome to TechSpot :wave:

Please test your onboard Ram with Memtest (for 7 Passes)

Report back with the findings

TechSpot wins over the other guy everytime.
Relevancy 26.66%

I resentley changed a dead Linksys router and installed a new Dlink (D524 I believe?). All ports are open and haven't changed the setup. Client can browse the internet, get mail but outlook can no longer send mail...??? I connected with my home ISP and put in my own mail server and it will send and recieve perfectly. Their ISP says nothing has changed on their end it must be me. Any ideas?????

A:D-link router can't send mail

Test email also goes fine, "test account settings" button.Supportnet says I'm sending extra info in my packets???? Isp says no chance. Client up until this morning could still send email using a web program, now it to is being blocked! I haven't touched it between friday and today. Help!
Relevancy 25.8%

My company gave me a computer, that used to be part of a network, for my personal use at home. I was using it at first as a terminal just disconnected from the network, but then played around in the admin/users area and changed (i think) to an un-networked computer. I know get error messages that pop up only upon starting and shutting down my computer. Once I click OK they go away, and everything seems to work fine...but they are kind of bothersome and I would like to know how to get rid of them if possible. The error message reads:

"Access violation at address 00426059 in module "WMP54GSv1_1.exe". Read of address 00000368."

Any suggestions?

A:Error messages on a formerly networked computer

WMP54GSv1_1.exe is part of linksys if you have something installed from them like a wireless card or software uninstall the driver then reinstall.
Relevancy 21.07%

I know it probably is, but I thought I would ask anyway. I got an email to 'Test' and 'Keep' a Dell XPS laptop. So what kind of scam is it?

A:Email Scam?

DON'T OPEN! If its not malware,it's a sales scam. Just label it spam and drive on.....Don
Relevancy 26.23%

I am running Windows XP Professional, 2.4 GHz Intel Celron processor, 40GB Ultra DMA hard drive. I have WMP11 and I have no sound. I have sound on aol, real player, and quicktime. I have customized my media player and selected RTP once and then QTP. Both times once I selected a media player as default, that media player would no longer have sound. I tried doing a repair on Windows XP, but when my computer restarted, I got the error message ALCXMNTR.EXE Bad Image
c\WINDOWS\system32\DSOUND.dll is not a valid Windows image.Please check this against your installation diskette. I have tried updating directx, but I get an error message during installation. I would welcome any ideas at this point.

A:I keep getting dsound.dll error messages

Try a clean install of XP
Relevancy 18.06%

Hi I have this problem we have a server running exchange server. There is 3 computers connected to the server running outlook. On 1 of the computers all of the emails have been deleted how can i restore the emails back onto this computer the other 2 computers have all of the emails.

A:Outlook passed 2gb .pst file

Oh I thought you were wondering about changeing the maximum limit :
Relevancy 17.63%

Hey people
I have Microsoft Outlook 2007 Service Pack 1
I would like to know how I can install Polish for spell checking
I can speak Polish but can't write it

A:How do I install Polish language for spell checking in Outlook 2007 SP1?

I think installing Proofing Tools from your Office CD and then install Polish proofing tools.

More info here:

And here:
And here:
Relevancy 26.66%

l have just bought a new graphics card:

256MB 256 MB GeForce Gf Nvidia PCI Video Graphics Card

I turn the computer off, installed the card, and then when i swith the monitior to the VGA port of the graphic card, The monitor stays in stanby mode.
It never turns back on.
Even when i switch the Monitor to the computer, the monitor still doesn't turn onn

wht should i do???

A:New VGA card does not send signal to monitor

Have you confirmed PCI-Express is enabled in system bios (cmos settings)

To get to cmos, you should see a prompt (for about 3 secs) when starting your computer, this prompt is usually DEL or F2 or some other (depending on your manufacture)
Once in cmos, make sure your video card is set to the correct setting (not onboard)
Relevancy 36.12%

As stated in the title. Mouse buttons work etc but doesnt move left/right. I have taken out the ball and cleaned it etc. Does anyone have any help, this is driving me up the wall. Thanks in advance.

A:Mouse doesnt move left/right but moves up/down

Best to replace it. Very little cost.
Relevancy 35.26%

Everything was fine in the past, but now, for some reason, the only port I can forward is 80 (for a web server). All the other ports remain filtered. Here's an example of one attempt to open a certain port:

And yes, I did Google it, I've been to portforward DOT com, and I've read the manufacturer's manual + instructions. Some basic info: my OS is WinXP Home SP2 and my router is USR8054:



A:Unable to forward ports!!

Very descriptive

Have you tried full reset and or firmware update, there may be corruptions in the internal settings.
Relevancy 25.8%

Howdy I have an eMachines D loaded with XP Home Edition It has Celeron D processor other stuff messages up won't -- error EMachines have properly boot GHz K L cache MGz FSB My error message I am receiving is this-- Windows didn t start successfully A recent hardware or software change might have caused this -- nope If your computer stopped responding restarted unexpectedly or was automatically shut down to protect your EMachines won't boot up properly -- have error messages files or folders choose Last Known Good Configuration to revert to your most recent settings that worked If a previous startup attempt was interrupted due to a power failure or a Power or a Reset button being pressed or if you aren t sure what caused the problem choose Start Windows Normally choices Safe Mode Safe Mode with Networking Safe mode with Command Prompt Last Known Good Configuration Start Windows Normally Regardless which option I choose above it loops and returns to this page again All choices seem ignored or stopped and then I return to this page again What is this telling me What do I need to do now Like anyone I don t want to loose my stuff I am backed up but not recently Feel free to ask more questions or email me at rexulmer gmail com Thanks Rex ps -- EMachines won't boot up properly -- have error messages I found out too late that eMachines was a poor--pooooooooooooor choice of puter ru EMachines won't boot up properly -- have error messages nbsp

A:EMachines won't boot up properly -- have error messages

Relax Rex,
you are not alone suffering with a failed eMachine. I bet this system has given you good service for a long while. Did you just turn it on one day and saw this error out of the blue?

This could be caused by a failing power supply, motherboard or hard drive. It is time for you to decide if you are going to spend money to repair this eMachines, or you are going to buy a new system. This eMachines repair could run into the $300 range
Relevancy 20.64%

Anyone else run into this issue?

We have 4 seperate computers running on a wireless network here at work. Recently we started having an issue where we can access the internet through email, but we can't pull the internet up via a web browser (IE). We end up having to click on the "repair" connection button for windows wireless over and over and over until it actully allows us to access the internet via the browser.

Have you experienced this? What is it all about?

A:Have email access...but can't pull internet up on browser

Hello, Mudshack, and welcome to Techspot :wave:

Please take a look at the following threads to make your experience here as enjoyable as possible

Message for all newcomers

SNGX1275's Guide to making a good post/thread

The Techspot FAQ

If you could take a minute to fill in some of your profile information that would be helpful to all members of the forum
Knowing someone's location in the world can be extremely helpful, even if you just put a country.

Also remember to post any problems or questions that you have in the appropriate forums

With regards to your problem, try restarting the router by unplugging it, waiting about 10 seconds then plugging it in again. Make sure that the settings are saved on it though otherwise you'll have to put them all in again.

P.s. this should be in Storage & Networking forum really but i expect a mod will move it for you
Relevancy 35.69%

My current system spec Processor AMD ghz RAM gb RAM pc Board Abit AV - rd Eye before (upgrade...) I make final :) peace find of the Trying moves mind to Socket GFX card NVIDIA GT mb After much research I want to upgrade to Processor Q Quad core ghz RAM gb OCZ Gold XTC DDR PC Board Asus P W DH Deluxe GFX GTS mb My budget is around - - Primary reasons for upgrading are because I wish to do a LOT of Video editing in AE and d work mostly in dsmax I also want to be able to run the latest games ie crysis gears of war pc without problems Here are the questions I d like to ask before I do this How much of a performance increase will I see in After effects rendering times From my understanding the quad core CPU will be capable of rendering Trying to find peace of mind before I make the final moves :) (upgrade...) frames at once Is it worth investing in gbs of RAM or will gbs be enough I see bit OS can only use up to gbs effectively anyway Could you suggest any other motherboards or is the one I have selected fine I am not clear about the benefits I d see in for example Asus Striker Extreme board i have been looking at Is GS mb a better option than GTS mb I d like to be more confident in making a decision here I believe the gts appears to be the best value for money card available right now but if I will be able to run games like Crysis and other existing ones say on par with the xbox console with GS then I d rather get that seeing it is half the price I currently have a W PSU will I need to look at higher Watt PSUs to support the new bits and pieces Thanks a lot for any help I hope you can answer some questions as soon as possible because I m ready to start buying right away nbsp

A:Trying to find peace of mind before I make the final moves :) (upgrade...)

Try not to make two threads with the same problem. Just messes things up. Also, making your own thread is better than hijacking another thread. Look in your other thread for my reply. Howard, are you around? Got some work for you.
Relevancy 25.8%

Hi everybody I ve been reading some of the posts here about people having trouble getting to POST and I thought I would share my experience and see if anyone care share some insight- I moved recently and when I set up my PC in the new location it was having great difficult booting It would hang on the mobo graphic screen and freeze The one time it did make it to the windows boot it spontaneously restarted And then it just wouldn t start at all The fans and drives all spun everything lit up but no beeps and no video I disconnected everything except the power supply the mobo the RAM the processor and fan amp heatsink and the video card Still nothing Here s the quirky part- when I pull the RAM I do get a beep code One long and two short- video error if I understand correctly I ONLY get this code when there is no RAM installed What I have tried- Reseated all the RAM and even bought some new sticks Tested the powers supply using the manufacturer s recommended technique- remove the pin connector from the mobo and place one end of a paper clip in the green terminal and the other in any black terminal If it starts PS is okay reseated the video No POST quirky beep and messages card Unfortunately I can t find my old card just moved alot of stuff still packed and MIA Cleaned out the heat sink It s No POST and quirky beep messages firmly attached Flashed the BIOS not just with the jumper but I also pulled the battery and the power overnight reconfigured the power cables on the off chance that the cable to the VC was bad What I suspect- Bad video card But again it worked fine before I moved but it may have been damaged by Bad No POST and quirky beep messages electrics in my new computer room I do have the power running into a surge protector and through a battery backup but the power outlet is old and I had to add a grounded adaptor And I did ground the adaptor Also I have tried to power it from a newer part of the house with proper grounded outlets No dice Bad mobo again perhaps caused by And before I forget here are the specs Mobo - Asus P S D-X Video Card - Chaintech GeForce GT Power Supply - Thermaltake TR - W RAM - I ve swapped in and out two different sets one old one new so I m confident enough in the RAM to call it moot Please note nothing was added or removed The PC was not dropped or ever handled by anyone but myself in the move I even buckled into the front seat with me Any insight thoughts or wild guesses anyone oculd offer would be greatly appreciatted MaHa nbsp

A:No POST and quirky beep messages

Hey CC,
Thanks for the quick response!

I've tried reconnecting all of the cables. I have not tried reseating the heat sink, because... lets just say the reviews on newegg about Arcticcool Freezer being hard to install are not overstated in the least. I've not tried reaseat the whole mobo either. I screwed it in there myself with the proper risers, and it is firmly in place (ie, no shifting.)

Interesting side note- I just tried booting it with no video card and no ram, just power and the CPU, and I still got the One-long-two-short Video Error code. Maybe it's not the video card but the mobo's agp port? :-/
Relevancy 26.66%

Hello some advise would be much appreciated For my daughter getting her grades and into Uni I promised her a good gaming laptop We configured and it duly arrived Within a few hours it locked up and would only start after removing the battery After the windows screen I got the bsod IRQL not less or equal error I was unable to continue even in safe mode to do a system restore send m9750 back? Area-51 and the windows repair failed to change anything I re-formatted and reinstalled all bar nero as I had read incd causes this sometimes So far it has behaved not too well set to laptop power scheme on battery when it turns off the hard drive it will just not awaken If the battery is removed and replaced windows will come up with the options screen and the only way to start is safe mode then system restore and all is ok untill it does it again Am I doing something stupid I Area-51 m9750 send back? know pulling out the battery is bad but have tried all the holding power butten for seconds etc to no avail My daughter would just be unable to use the machine as it is I stupidly never even thought that the battery life would be so poor and the machine would make so much heat Here is Area-51 m9750 send back? the spec Area- m Display quot WideUXGA x LCD with Clearview Technology - Stealth Black Operating System Genuine Windows XP Professional UK with SP - English TV Tuner None Processor Intel Core Duo Processor T GHz MB Cache MHz FSB Graphics Processor Dual MB NVidia GeForce Go GTX - SLI Enabled Memory GB Dual Channel DDR SO-DIMM at MHz - x MB System Drive Single Drive Configuration - GB RPM SATA Optical Drive x Dual Layer DVD -RW x CD-RW Combo with Nero Software Sound Hardware Intel High-Definition Audio -bit Khz with surround sound Keypad Mobile Keypad - English Wireless Network Card Internal Intel PRO Wireless a b g Mini-Card Communications Integrated Mb Gigabit Ethernet amp K V Modem Floppy Drive USB Floppy Drive Bluetooth Integrated Bluetooth Device Warranty AlienCare -Year Free Phone and Collect amp Return Security Software Kaspersky Anti-Virus Personal Professional - month subscription Included Any thoughts much appreciated I have emailed tec support on friday and so far other than the automated response have had no contact nbsp

A:Area-51® m9750 send back?

hell yeah...
its a high end laptop, heat is a "no-wonder" issue i suppose...

btw about the InCD. i got t agree that InCD is sux.
it fail my computer to burn any cd the other day,
which require me to reinstall the windows and reinstall physically (happen to dvd drive in desktop)

in the meantime i suggest you to check the minidump and event viewer if you could get it....
Relevancy 26.66%

Hi all, recently i have been wondering if it was possible to view/send files on our other pc's through our network. We're all connected to a d-link g604t modem/router via an ethernet connection.

Would it be possible to connect to each other's pc's or does the router just give us each an internet connection?

Any help/advice appreciated thanks.

Also if you need any more information don't hesitate to ask

A:Send/view files over network

it is possible, provided that there is a share on each system and everyone is on the same workgroup.

If you mean connect as in be able to work on other peoples computers, then you'd need remote desktop enabled on all the systems.
Relevancy 33.54%

I've never posted on a tech forum and I hope I'm even on the right board.
I have somehow managed to deactivate my hotkeys on the side of my Toshiba Satellite laptop and I have no idea how to correct it. I primarily use Windows Media Player for my music and it is much more convenient to have these keys operational.

Many Thanks.

A:Hotkey (Play/Pause, Stop, Forward, Back) Problem

You could try reinstalling the Toshiba Common Modules as well as the hotkey software from your source cds.
Relevancy 26.66%

Its weird because the model looks different from the one i ordered i was supposed to get this one

but whats weird is the green sticker on the back says its X1650 Pro 512M DDR2 Pci-E Dual dvi tvo

A:Did new egg send me the wrong video card?

Pop it in and see what everest says.
Relevancy 22.79%

I used the "SEND TO" feature to back up my data to another there a downside to that?

I simply selected all the files i wanted to be backed up and right clicked them and the send to feature is available as well as copy, paste,etc...and i choose the "Send to" feature to copy all the files to the other hardrive

A:Is Using The "Send To" Option Ok For Backing Up Data?

/?????anyone know
Relevancy 25.37%

Hoping someone has some ideas. I have a Toshiba Satellite 2410-s185 running XP
When I turn the computer on I get the win XP and then these two error message.........
1. winlogon.exe
not a valid windows Image
(only option is to click okay)

2. isass.exe
Not a valid windows image

.......then I get a BLUE screen and nothing else. Trying f8 brought me to the same blue screen Anyone have any ideas or should I just reinstall XP, which of course we all hate doing and losing everything.. lanievig

A:Toshiba won't boot error messages, blue screen

Hard drive error, or an infestation that has damaged the first four to eight sectors of your hard drive.
Toshiba does not have software for testing the hard drive fitness if it is Toshiba drive, but other drive manufacturers to have drive fitness tests for their own drives.
Since the drive will still turn, you can rescue your data using a mobile drive adapter from or, then put the drive into a desktop machine as a slave, then drag and drop to the good drive, then burn to a CD for reinstall.
Then run windows in a Full install mode to see if the drive can be reformatted and Windows reinstalled.
If not, you will need to buy a new hard drive.,, and have very nice prices on mobile 2.5 inch hard drives nowadays.
Relevancy 21.07%

My husbands aunt has dial up, we set her email account up but now several months later it is telling her that someone else has that account and she is unable to send email, this is the 2nd time this has happened. How can this be fixed so it doesn't happen again?

A:email conflict in msn

Hi Twinkletla1 and welcome to the TS Forum :wave:

You dont say what email provider you have, if its with an ISP or with one such as MSN hotmail, Your thread title mentions MSN so I'll hazard a guess that she either hasnt used in for more than once in 30 days and as such the account has been shut down, this is to prevent unused accounts cluttering up the MSN server and filling with junk mail.

To keep a hotmail account active you have to login regularly, about once a fortnight at least.

If its another provider than please post back and let us know.

Whilst your here could you do me the honour of reading the threads below It will help to make your Techspot experience a more pleasurable one.

Techspot FAQ.

A message for all newcomers.

SNGX1275`s A guide to making a good post/thread.

Relevancy 21.07%

I wonder if anyone can help. I have been receiving emails without any problems but when I try to open some of the attachments, all I get is a page of gobble-de-**** nonesense.

Someone suggested that I save these emails as a 'eml' insted of a 'txt'.

I have no idea what this means and even less of an idea of how to do it.

Can anyone help?....


A:help with email attachment

What e-mail program are you using?
What are these attachments supposed to be? (You should never open an attachment with unknown contents!)
Who sent you these letters and what e-mail program did they use?
Relevancy 25.8%

LG GSA- D External USB DVD Burner and error messages I tried to use LG GSA- D External USB DVD Burner that I borrowed from my friend I hooked USB Burner and messages DVD External GSA-5120D error to the Desktop Win SP I have different images on the HDs not only one if it is one image we GSA-5120D External USB DVD Burner and error messages might be think the problem with that image itself and I have used two different softwares for burning these images Nero and MagicISO The process of burning GSA-5120D External USB DVD Burner and error messages was ok but when it came to play thes DVDs I received this message Windows cannot read from this disk The disk might be corrupted or it could be using a format that is not compatible with Windows Click to expand and with other DVD I received this error F is not accessible letter F for the DVD The files or directory is corrupted and unreadable Click to expand I did a test I brought a DVD that is already burned and play with GSA- D it worked The DVD barnd that I am using is Imation nbsp

A:GSA-5120D External USB DVD Burner and error messages

There are a number of burn formats that can only be read on the burner on which they were created, or by the burner software that originally created them. It is merely a matter of settings.
Take a look by trying various combinations, or read through the burner and burner software manual.
Also, check the Nero website for updates which are available if you have the correct product ID key... and check the burner website for firmware updates. Nearly all burner companies have to issue one or more firmware updates in the first year of issue.
Relevancy 27.52%

I have cable internet.To send a fax , do I need to hook up a phone line to my computer , or can I send it through the cable ?

A:How Do I Send Fax ?


I believe there are online companies who will do what you ask such as this one, basically you send them the document in the form of a word or notepad text and they send it via fax to a specified number, it costs money to do it of course, its easier if your planning on doing a lot of faxing to buy a small fax machine and use your home phone line, and of course you can use your PC as a fax machine but it would mean installing a modem into the PC, FYI Modems are unreliable which is why Broadband is so popular, so I would advise buying a proper fax machine.

Relevancy 26.23%

Setting up a wireless network in a house... 4 computers down 1 to go! I'm using a linksys router, but a D-link card. The card was accessing the network fine, added encryption and now the status says the network is connected but not receiving any packets. The computer is set to automatically obtain IP and DNS, can not find default gateway that way, when manually setting IP and DNS, can connect but that's it. When pinging the router it times out. I have updated the firmware on the router, updated the drivers for the card, reinstalled the card to a new slot, sat on the phone with tech support for a total of about 6 hours difference...Still nothing. Any help or tips would be greatly appreciated!

Thanks much!

A:Can send but not receive packets via wireless network

Are you using WPA? Many devices don't work well with that. Try WEP instead and see how it goes.
Relevancy 21.07%


I would like to know if there are any tools available on the internet to trace an email.It's a junk mail.Please help.

A:Tools for email trace

You can check e-mail headers via the options button while in an e-mail. Copy and paste the text from one and we'll see if we can trace its origin (blank out any important network information to do with yourself or your company such as public IP address if you like).
Relevancy 36.55%

This is a weird problem. Yesterday everything was working fine. I haven't installed or uninstalled anything.

Today, when I play Command and Conquer Generals or Battlefield 2, whenever I am moving the mouse, the game freezes completely. If I am not moving the mouse, the game seems to be just fine.

I have tried the following:

Updated to the latest driver for my mouse (Logitech G5).
Updated to the latest driver for my graphics card (GeForce 6800).
Ran anti-virus software.
Ran scandisk, ad-aware, and Spybot Search and Destroy.
I defragged my computer.
I re-installed directx.
I re-installed the game Generals.
I have rebooted many times.
I have monitored the GPU temperature (45 degrees).

I am running out of ideas....can anyone help?

A:Game freezes when mouse moves

Is there alot of important info on your computer, or things that will take a while to load back on, because as a last resort you could always reformat.
Relevancy 18.06%

I am encountering a bizarre issue synchronizing a Motorola Q to our in-house Exchange server. Topically, everything is working as expected. The problem at hand is, at seemingly random intervals, the Outlook inbox as well as the Q Outlook inbox randomly marks all messages as read; as would be expected, this is creating havoc in matters of scheduling, &c. I have searched all of the Outlook settings, as well as all available Outlook-related options on the Q to no avail. Has anyone had any experience with these phones or any such synchronization issues? Outlook 2003 is completely updated; I am not sure about the version of the Q's firmware, but would assume, considering the phone is new, that it is probably the latest version....

Any ideas?



A:Motorola Q- Outlook 2003 sync issue

Check with technical support for Motorola Q phone... To see if they have any issues like you have described above..
Relevancy 47.3%

It just happend a week ago Internet became terribly slow many websites - about of them - don t load at all page not found and I can t send Email - only recieve MSN Messenger either connects or not it depends if it feels like doing so In addition Start- gt Run- gt cmd- gt ipconfig had displayed quot ipconfig quot is load, Email don't can't Websites send not recognized as an external or internal command and something with a Websites don't load, can't send Email batch file I was fixed by going to My Computer- gt Properties- gt Advanced- gt Enviroment Variables- gt Path and editing Websites don't load, can't send Email it to c windows system Before changing it had been something with Quicktime which was fully uninstalled afterwards My Specs AMD X GTX Extreme MB DFI LanParty Ultra-D OCZ GB X - - - WD GB RPM ENERMAX Watt DMark Using NOD Sygate Firewall Adaware Regvac Registry Mechanic Tuneup Utilities Whats the problem I ve tried uninstalling the Ethernet drivers and reinstalling didn t work My computer is virus and spyware-free and well-protected What could go wrong nbsp

A:Websites don't load, can't send Email

refer to this tutorial
Relevancy 18.06%

http www shoprbc com ca shop configurator php cgid I m on ABOUT a not inc tax and not REALLY that low budget but that isn t SOLID though if I find something worth breaking my budget OR YOU suggest that I will be very happy with a particular item and I d have to break my budget I m also trying to sell an old HP Pavilion just to generate a few extra bucks And I don t want to sound like I m complaining so don t take it like that but I m in a wheelchair which is WHY I have to do work that I can :) QUOTE! QUOTE EMAIL decide ME shops THE and This me help page; sit down in and I DO spend A LOT of time in front of my PC so MY PC is very important to me which is why I m This shops QUOTE page; help me decide and EMAIL ME THE QUOTE! :) asking for your help with this AND I think if you read the very end of this post I have a fun way for you to help me out Now I want to do multimedia and a BIT of gaming I m going in to Media Design maybe even GAME DESIGN itself in school next year this is why I need a new machine so I need to be able to for example run TWO extremely CPU intensive apps at the same time like a multitrack mixer and a track editor so I know I m pretty much having to go with the duel core SO I already have a case the simple black anatec one everyone else bought when it came out in and they just have to put in a new PSU for me for the bit mobo I also already have piles of disk drives and a DVD writer that is just fine So now I m PRETTY sure that I want to go with a DUEL CORE because I ll need it for my multimedia work And I m very familier with the ASUS products already so I d probably just want to stick with them but if there is something less expensive that is MORE suited to my work then please suggest it RAM I do not BELIEVE is an issue though I could be wrong but I was just going to go with the basic g After I ve picked my chip and board up all I need to do is pick a graphics card and a sound card for my multimedia work and yes I understand that with my budget I m trying to put together a pro machine and its difficult to do that But my basic idea is that since I m just a starter multimedia artist and not a pro I don t NEED the PRO version of what a pro would use and pay for right NOW anyways so what I m trying to do is get the smaller cheaper version of the machine I would WANT to own when I got out of school and was working The baby version of the monster I would get when I m really working I know its hard with my budget but don t forget that I m in Canada and I m going to get taxed to death when I buy this So can you help me configure the Chip Preferably DUEL CORE but if that is what is driving up my price too high all the time then I THINK I can deal with single for now though I may regreat that Mobo there are some odd chipsets out there now why do ATI and NVidea have chipsets does that mean I don t need the card anymore and if I AM going to get a Radon X-card of some type then can t I save money but NOT getting a board with the onboard stuff RAM was just going to go generic gig providing it works Video card is it REALLY needed in some of these mobos these days that have the integrated stuff otoh isn t the integrated stuff not that good and shouldn t I just get a quot plain quot mobo with lots of slots and buy cards instead - I DO plan on buying a VIDEO card so well see Sound card cheapest that I can attach a MIDI piano to later or I ll do that more seriously and again see PSU How much power am I going to need Sometimes because I have SO MANY USB things plugged I think I already run low on power A SO all I m asking YOU GUYS to help me with is deciding on the best motherboard and chipset platform to work everything else off of and IF I should even bother in some cases getting the cards if integrated chips if I DO PLAN on buying an ATI PCI-E video card and insert brand sound card anyways I ve NOT been keeping track of this stuff much anymore just only have time for so many quot tech quot hobbies so I just do not know what m... Read more

A:This shops QUOTE page; help me decide and EMAIL ME THE QUOTE! :)

i would go with an intel core2 duo processor, asus 680i motherboard, and at least a gig of corsair DDR2 800 ram, in dual channel config. i reccomend two smaller hard drives as apposed to one big one, so you could run them in a fast raid 0 array. raid 0 combines the capacities of the disks involved, so two 160GB drives would give you single 320GB volume. as for the power supply...go with a name brand (that's important for pretty much all computer parts) known for quality, such as antec or PC power & cooling.

if you get a single video card, i would say get the antec neopower 550w, which is quiet, efficient, and supports modular cabling.

as for the USB usage you mentioned, your USB controller (mobo) is going to be the limiting factor in determining how much power can be drawn.

i would edit your post and remove your email address, this is a public webpage and can be viewed by anyone.
Relevancy 22.36%

Here is the found connect account Windows domain cannot (2003) to not back story I am at a school with a NT domain server We bought a new SP server We have two IP ranges Our old configuration had static IP address with DNS servers located at the Windows cannot connect to domain (2003) account not found district that was referenced in the TCP IP properties I set up the new server with roles It has an Active Directory It is a DHCP server I have machines The DHCP has a superscope with scopes within the superscope Each scope has a range of IP address and the exceptions for the server printers et cetera It also is a DNS server that quot listens to all IP addresses quot instead of listen to the quot following IP addresses quot However on the listen to the following IP addresses I put in it s own IP address The DNS server also has forwarders to the district DNS servers The last role is as a File Share I have connected about computers just fine Everything is working good however I am now getting sporadic computers that can t log on I get this message Windows cannot connect to the domain either because the domain controller is down or otherwise unavailable or because your computer account was not found Please try again later Click to expand The computers are still on the server If I re-add the client machine to the domain everything is fine--for now This has been happening to xp machines It has happened times now and I am worried about a continual problem or a major problem around the corner Are there any ideas on what is causing this I have read up a little bit about SID problems but I am not that literate yet I am wondering if I set something up wrong failed to set something up or if there is an entirely different reason Could it be because the computers are still on the NT directory I have not taken off the NT active directory yet or added the NT server to the server I also have an independent server for the library and a server for a special ed room and program No one at the district can help I am out of ideas I am getting really worried that I did something wrong I can t fix I am not an expert I am in the very beginning stages of my MCSA training nbsp

A:Windows cannot connect to domain (2003) account not found

I would look at the network before you look at the OS, when it happens see if you can ping the server by name and IP, also look in the event viewer of the machine and see if there is anything showing up in there.

Relevancy 20.64%

new build/ pros and cons /please

New build? This may not be the greatest, however the price seemed right for a first time build. Biostar Gforce 6100 M9 nvidia socket939 with heat sink on the nvidia 4 chip. Atholn64 3200+ Venice. Kingston dual channel 512 pc3200 ddr 400mhz 2x256. Thermaltake 430w ps I'm open to any thoughts, so my next will be better PS: Its for my 14 year old daughter who mainly does Im, email, music, Surfing, my space ect Thank you Kirk
Relevancy 26.66%

Hey, I am slowly advancing my skills on the computer. Well heres what is going on, I have a laptop and can pick up 3 wireless signals from my house. I wanted to send messages to the people telling them that their router is unencrypted and all that would i go about doing this?

A:send message across router

Hi phil11.Welcome to Techspot.

Only the CIA can do the sort of thing your asking

The only way you might be able to do it, is to walk around with a signal detector,

or your laptop,and find out where the signals of the open networks are strongest,then

try and workout which building it`s coming from.They should be within about 100 feet.

There is also something called Netstumbler which may help.

IMHO it`s not worth trying to inform people,just don`t use their connection.
Relevancy 18.06%

I have a weird problem connection problem when I to go to Outlook. The connection says authorizing then a timeout error. This problem comes and goes. Does anyone have a thought as to what this might be?

A:DSL/Outlook Express problem

Try disabling email scanning in your AV/Firewall.
Relevancy 23.22%

i need to get into the administrator account on this laptop.

i barely know any information about this computer.
i am on a limited account.

it is a dell inspiron 1100.
& i am using windows xp pro.

obviously, i need to get the password for the administrator account.

i would really apprececiate some help on this matter.
please & thanks.

A:I need into my administrator user account but don't have the password.

Ask the administrator.
Relevancy 34.4%

Well today I was trying to open the warcraft port to host custom maps So i went into my routers configuration through my browser and got around to the area where i could make ports public or private i set the options accordingly and loaded up wc i still couldnt host so my friend jeff said that it might be because i have a dynamic ip on my router my computer itself has a static ip so i figured i would port Zonet forward router nightmare! try to do the same for my actual router in its static ip area i plugged in the adresses and yadayada my computer and then as i hit add my computer choked for a minute then froze for good i restarted it and got back in my internet connection appeared to be connected at mb s but as you probably have guessed was a fluke and couldnt get pass my router and a ping showed that i wasnt even in connection with it i went to my router and with a paper clip pushed in the small button on the router that read Zonet router port forward nightmare! reset i was hoping that it would reset the routers settings and i would be able to reconfigure it to my computer like it was new that didnt work so here i am without a router with a direct connection to my modem looking for help any ideas anyone nbsp

A:Zonet router port forward nightmare!

See the router manual for the factory reset procedure. You may have to hold down the reset button or play around with cables.

No, the problem was not your dynamic IP address. Don't ask Jeff for any more advice

The router's connection to the internet and your computer's connection to the router are completely different things and they are not related to each other in any way. You don't have to change the router WAN settings to somehow match your computer's LAN settings.
Relevancy 25.8%

hey everyone ive got what i think is a pretty interesting question here i have a linksys wireless router which other/unknown computers workgroup Sending messages to does not have the generic linksys ssid but it is unsecured i am planning to secure it but i am not ready yet as i am still tweaking some other things with the router and my computers anyways i have a neighbor who keeps logging onto my router even after i check the dhcp log and delete them they just reconnect a little while later after ive kicked them off my question is this i would like to send them a friendly message but i cannot figure out how to i am familiar with the basics of netsend but as far as i know to use netsend the computer has to be in the same workgroup is this correct if so is there a way that i can find their workgroup or even send them a message without sending them a message lastly if they have netsend disabled on their computer is there a way that i can send a message by another means i know that this is a pretty interesting question but i would just like to be able to send them a message nothing harsh before securing my network so i would greatly appreciate any help thanks in advance Sending messages to other/unknown workgroup computers note i posted this message in two forums on techspot because i wasnt sure of the right one to Sending messages to other/unknown workgroup computers use nbsp

A:Sending messages to other/unknown workgroup computers

to use netsend the computer has to be in the same workgroup.Click to expand...

No, but both computers must have the messenger service enabled.

You're solution is to secure your network - either by encryption or by allowing only your own mac addresses - possibly both.

Being a neighbor, you could also drop a note through their door
Relevancy 23.22%

I have setup my computer (WinXP Home) to have two user accounts. I've noticed that often (maybe always) whichever account is initially logged into when the computer is first booted up seems to be the only account from which the CD or DVD drives can be accessed. What can I do to correct this?
Relevancy 21.07%

I'm looking for a way to trace a spammer, legally, with legal intent.
The isp would be great.
attatched is txt I've gotten already.
Thanks for any help.

A:Can yahoo email be traced?

if emails come to a mail client like thunderbird ot mozilla you can view the whole content
view message source
that may get you origin
thunderbird and mozilla only
I don't know bout IE or messenger
Relevancy 20.64%

Hello from newbie to this forum After searching threads I could not find solution for this particular and perplexing problem I have a small network as follows Winxp pc Win kpro pc G Mac All connected through SMC Barricade router which is connected to adsl modem Sprint The problem is that the Win pc has lost ability to connect to internet through any browser IE FF Moz Opera I can send and receive email use my ftp program to connect to remote servers and upload download files and can move files from my Mac to PC via Dave client software Here is what I have tried so far powered off everything then powered up modem router pc bypassed router hooked pc directly to modem disabled firewalls uninstalled reinstalled tcp ip uninstalled reinstalled nic replaced nic with known good one use internet, out email, ping can receive Cannot can access FTP, replaced cat cable I can access internet with the winxp computer Cannot access internet, can receive email, use FTP, can ping out using it now I can ping from win computer to this computer and mac can ping router and modem from win pc can ping loopback and ip address from win pc ipconfig shows that I am being assigned an address all pcs on net have same subnet mask address I cannot ping the win pc from the mac or the winxp machine I have also run WinsockFix exe I have deep scanned with Norton for viruses I have run Adaware and MS spyware Still no joy I would appreciate any suggestions nbsp

A:Cannot access internet, can receive email, use FTP, can ping out

May sound daft, but have you ran the Internet connection wizard, sometimes it just fixes things.
Relevancy 26.66%

What driver can I send midi files to in REALTEK AC97 so they will play? Or -- is there a midi I can download and install that will work with my AC97 setup?

A:What driver can I send midi files to ?

Go to the Sounds and Audio control panel/Audio/MIDI playback and check that your sound card is selected.If that doesn`t work,select one of the other choices.If that doesn`t work get a soundcard that supports MIDI.There`s also a software synth called Wingroove,but hardware solutions are better.
Relevancy 36.98%

lo all, i recently purchased a razer copperhead and when i am on counter-strike, if i slowly move the mouse side to side it will keep going upwards :s It doesnt seem to be doing it in any other programs/windows but im not completely sure. I have no idea how to fix this so please help if you can. Thank you


A:Mouse moves upwards

Did you try changing your mouse pad? I've seen this problem with my optical mouse before. It will just start moving slowly in random directions. It all has to do with the sensor receiving the signals, and it thinks it is moving.

:wave:Welcome to TechSpot:wave:
Relevancy 18.49%

I have windows XP .When i opening Microsoft outlook It get hanging.When i changing the data store folder then it opening.After 2 or 3 days the same pbm occured.I have Macfee 8.0 installed on that pc.
Plz give solution.
Relevancy 21.5%

Following 2 re-installs of SBS2003 on my Dell 400SC server none of the workstations on our network are able to send emails via Exchange server.
The error message that keeps coming up is:-
"553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)"
I'm pretty sure this is just a setup issue but having searched several other forums there seems to be several opinions as to the cause of this error.
Any suggestions would be greatly appreciated.
All the workstations are running XP Pro (SP2) and using Outlook 2003 for email. :blackeye:

A:Email not being sent

Normally this would be an incorrect DNS configuration on a Windows Server. Check your event viewer. If there are DNS errors, you may want to resolve those first. If you DNS is clean, you still may want to use the IP address of your Mail Server instead of the domain name. Additionally, something I've run into in the past is some ISP's only allow sending of mail within so many seconds of POP3 authentication. I believe QWest does this. This is their way of preventing relaying but it screwed me up seeing how they provide our connectivity but my POP3 email is with another company that houses our domain so I never downloaded POP3 from Qwest. It could be that username and password authentication are required to get around this. I'm not sure where that setting is but I'll try to remember to look on my server at work tomorrow. If I find anything good, I'll let you know.
Relevancy 26.66%

Ok I m the one who was send have wireless, can't it that Now use mass I I mailings...msg to tripping over the cable each night because my husband couldn t figure out how to connect the wireless router and make our wireless work Last weeklend he finally got the wireless up and working and it was great until I attempted to send out a mass mailing Let me splain Lucy We are approved mass mailers from our home We pay extra each month to Cox Cable to be able to send out mailings about our not for profit animal rescue to our subscribers We follow all of the rules with Now that I have wireless, I can't use it to send mass mailings...msg a certified opt in procedure and are Habeas Certified mass mailers We aren t spammers We have about supporters in countries who depend on their newsletters to let them know if we need funds or foster homes transportation etc We are also a non denominational International prayer ministry so if an emergency prayer request comes in we need to be able to get that info out to our members We use a mass mailing software program called Gamadyne Mailer We have had no problems up until we tried to send the first newsletter out without the cable It just froze up almost like it wasn t fast enough to send it I had to plug the dadgummed cable back in ARGH Does anyone have any idea what we can do to fix this and do away with that blasted cable for good Remember please use widdle tiny words in your reply as I am blonde and not very techie oriented Thank you Robin nbsp

A:Now that I have wireless, I can't use it to send mass mailings...msg

Perhaps it is your mailing program trying to make too many connections simultaneously? Look around in the program settings for a place to limit the rate of ending out mail Home routers usually can't take more than 500-1000 connections and you should set the limit in the program to 200-300 at a time to be on the safe side.
Relevancy 18.06%

I have just lost every thing on O/Exp, all folders, emails the lot, it now looks like the first time I ran with O/Exp all the basic folders are there but empty, I have tried restore but it's just the same. Have done a search and what comes up is the same empty O/Exp. I have a feeling that the start up may be inhibited as I had a start up progame and monitor which I have just deleted. HELP, if the wife finds out I will be made to do the ironing for a month aaah.

A:Outlook Express Disappearance

This link is almost relevant- the bit about searching for .dbx files certainly is.
Relevancy 27.09%

"net send" command doesnt work at Windows XP Professional Service Pack 2 (korean version)... can any one help me??

A:net send command

Did you just upgrade to SP2?

Check Windows firewall. Also check to see if Messenger service has been disabled by default (hopefully).
Relevancy 25.8%

I ve set up my fair share of wireless networks over at least however this one has stumped me I m setting up a wireless network in a freinds house she has a can comps. packets, no Works send. Reciving with Wireless: other Com Hub and a Belkin F D g b and i also have this card on my CarPC the other computer involved is a tentant at the house i have not spoken to him however his connection is working fine The problem is On this one computer Windows XP the card finds the network and Wireless: Reciving no packets, can send. Works with other comps. Connects when i put the WEP key in however it isnt getting an IP address from the DHCP server the router and isnt reciving any packets that computer cannot ping any others nor the router edit I have tried entering a Manual IP Subnet etc but still not recv packets I can connect using my Wireless: Reciving no packets, can send. Works with other comps. CarPC with the same card so its not the card or the router therefore it must be the computer configuration I have disabled the firewall etc i see no reason why it should not recive any packets I even reset the router to make sure her MAC address was not in the disallow connections section Has this happened to anyone else I would really appreciate any input Cheers Anymore questions please ask Edit Delete Message nbsp

A:Wireless: Reciving no packets, can send. Works with other comps.

What kind of system is failing (desktop,laptop) and have you checked the obvious?
device manager; does it show up, have conflicts or any icons on the specific device?
if a laptop, there's ususally a slide switch to power on/off in addition to the
software enable/disable.