In November I upgraded from Windows to Windows bit My Bluetooth devices were working properly Driver 10 Bluetooth for Notebook Windows Pavilion Last week I did a complete hard disk reformat and reinstallation of Windows nbsp Now I cannot connect any of my Bluetooth devices In Device Manager it says the two Bluetooth devices Generic Bluetooth Adapter and nbsp Microsoft Bluetooth Enumerator are working properly The drivers are both dated June version nbsp Microsoft nbsp When I try to connect it shows Your PC is searching for and can be discovered by Bluetooth devices but none of my devices Microsoft Bluetooth Notebook Mouse and several Apple iDevices show up I have of course enabled discovery on the devices nbsp Is there a driver I need I know this can work since everything was OK after I upgraded to Windows before the full reinstallation Also I followed the same procedures on my HP Pavilion destop HPE- t and Buetooth works fine there nbsp Any help would Windows 10 Bluetooth Driver for Pavilion Notebook be greatly appreciated nbsp
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Hi: The only suggestion I can offer would be to try the W10 BT driver directly from Broadcom. It would be the 3rd file listed. http://www.broadcom.com/support/bluetoothhttp://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Windows-10-Bluetooth-Driver-for-Pavilion-Notebook/td-p/5688183
I have recently somehow disabled my windows key. I have tried going to Microsoft and doing the "Fix it" thing for the registry and it does not work. I have tried this numerous times. Could it possibly be the keyboard I'm using? It use to work however with the same keyboard. I use Avast Anti-Virus, Malwarebytes and iObit system care as my general cleaners. Not sure if any of those have a default setting to disable the button. Thoughts / Suggestions please?!?!
Do you mean Windows is asking you to activate again? What version of Windows are you running?
Power outage due to storm. Came back on without pictures and documents. It's an HP desktop. Would a file recovery program work? I've tried some of the instructions online, but they don't work.
Oh mary; I feel your pain. Were the pics within one folder and now they're ALL missing?
I sometimes wonder about techs using tools such as Seatools, HDD regenerator etc to diagnose/repair hard drives. Do any of these tools beat Chkdsk in any way?
(besides data recovery tools, I guess those have no match in Windows).
IMO, always use the tool provided by the vender. At the time you need this tool, you don't need a 3rd party screw-up to 'help you' really mess it up.
I have a Soundblaster Z on my PC that was working fine until I upgraded to Windows 10 today. Now the sound still works but sounds like there is hardly any treble at all. It sounds like singers in songs are singing in a tunnel or something. You can't hardly make out what the vocalist is saying over top of the background music.
Can someone please help me fix this!?!?!?!?!
Not yet maybe. According to Creative's website, drivers for Soundblaster Z will be available in August 2015. It doesn't say exactly when though.
Following yesterday's worldwide launch of Windows 10, all three major GPU vendors have released new graphics drivers that support Microsoft's new operating system. If you're upgrading to Windows 10, make sure you download and install these drivers soon after launch.
Is AMD planning to release Windows 10 drivers for RadeonHD234k cards too? Are those machines stuck with Windows 7?
I recently used a program Autoruns,, and deleted some startup things I shouldn't have.. Since then I cant connect to internet, the troubleshooter for wireless adapter says the Windows wireless service is not running on this computer (WLAN Autoconfig service) and fails to start the service.
I notice on windows task manager there are only about 13 Processes running and there are usually about 20, and on Services there are about 40 running and about 100 or more stopped services. Thanks for the help
Also on startup now I have a pop up on bottom saying, Failed to connect to a windows service. Windows could not connect to the System Event Notification Service service. This problem prevents standard users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond. And the startup and logon time is really long now
Sounds like you deleted the network drivers, I did this once and ill be honest unless someone here knows a trick, or you have a CD with drivers you are going to have to have a hell of a time unless you know the name of the hardware and download the right driver, thats my guess. best of luck
The second quarter of 2015 saw the sharpest decline in global PC shipments in close to two years and once again serves as a reminder that last year's brief resurgence was little more than a fluke.
Nobody needs to upgrade every three years now. You can easily hold your hardware for up to 10 years if you really want to.
This happened couple days ago when my laptop started to act like crazy.. It used to freeze but two days ago it shuts down when I'm in the middle of doing something like Photoshop.. It even shut down while posting this thread once..
I thought it'd be a problem with the windows so I installed a fresh one but yet the problem is not solved..
And after some search on internet I came up with some apps like HDD and CPUID Monitor and here's a snapshot of the scan, and I wish someone of TECHSPOT family would help, that'll be so much appreciated..
AMD has launched their first WQHL-certified Catalyst graphics card driver update since December 2014, bringing a heap of new features and performance updates across the board, as well as the usual array of bug fixes.
I have played with the CFX and Freesync support on the Acer 1440p 144hz monitor. Works great and makes me want to actually own a Freesync monitor now...
I can not find any DirectX compatible graphics when I try to play the Sims 2 for the Windows XP. Please Help Me! But I do not have any internet though.
Try this page for help and then let us know what the outcome is.
I have previously on a different PC recorded the stereo mix in Audacity, whilst playing a CD and would get the full frequency range of the CD. On my current PC I now get a 20khz cut off, despite changing the settings (the sample rate and bit despth) on the playback and recording devices in Windows and also in Audacity. Does anyone know why this would be, and if there is any way of correcting it?
Okay so for the past several hours I ve gone through the throes of attempting to get my Asus laptop s built-in webcam to work I took a on laptop cannot Windows 7 webcam the built-in Asus detect my look at Device Manager and had found two items titled quot Base System Device quot or something to that effect I don t quite remember and I thought that one of them would be the webcam Well after searching for the mystery items Hardware ID on Google I had Windows 7 cannot detect the built-in webcam on my Asus laptop discovered that these devices were in fact not the webcam Then I had used the quot Add a Device quot option under Devices and Printers in the Control Panel to try and find the webcam After letting it churn for ten minutes it appeared that Windows wasn t even searching anymore and I was staring at a blank window for nothing The only clue I have about the situation is after running DriverEasy it listed quot USB M UVC WebCam quot as a needed update but it also said quot unplugged quot beside the selection and was highlighted in red After attempting to download and install the driver the program had given me some Packard-Bell webcam driver that is most definitely not correct Packard-Bell still exists This had all started however when I made a clean install of Windows I had just spent the last two days scouring the web digging up my lost drivers and programs that had come with the laptop Everything s been successful save for this one element My webcam is lost somewhere in my laptop I just can t get to it If anyone has any ideas as to what s happened and yes I know it s a possibility the wiring is shot and how to fix the issue please give me any tips that you can I ve done everything possible in my power including trying to find the drivers but you obviously can t install drivers for devices that Windows doesn t even detect Oh before I forget my laptop model is Asus x v B if that helps in any way nbsp
Was this laptop purchased with Windows 7 as the OS that was installed on it ? Or did it come with Windows Vista and you just wiped it out and put Windows 7 on yourself??
I am new to this forum..
To start, I had just bought an ASUS computer.. wanting to play games like borderlands 1, left for dead 2 etc. But, when I was very trilled waiting to start the games, both of them had blacked screen and forced shutdown my computer every time after the game has been launched!
I had done many researches in the net, changing the registry values in directx11, reinstalling the NVIDIA drivers (halfway black screen upon reinstalling), changing the compatibility to Windows 7, adding missing physxcudart_20 to the games...None of them works..T-T
Any help is greatly appreciated!
I'd recommend to do the following:
Perform a clean install of Windows
Re-install Nvidia drivers
Download CPU-Z and GPU-Z (or any CPU and GPU monitoring software)
Monitor both while attempting to play games - check for temperature spikes.
Doing the above will help you rule out a lot of potential issues that are causing your problems. The clean windows install will get rid of any OS related issues. You never want to touch the windows registry unless you really have to, especially if you're not very well versed in the way it works. It can cause way more harm than good. With that said, the system crashes were probably due to a bad driver instillation and was causing a BSOD - most modern systems are set to restart / shutdown when this happens. You'll never know it happened unless you changed the configuration to stop the automatic shutdown. It could also be temperature related, if your CPU or GPU overheats, it'll typically trigger a system crash as well and result in the same BSOD sequence.
Let me know how it goes after you've tried what I've mentioned.
Scroll down for the drivers.
I'm trying to connect my PC and my Asus Zenfone 2 with Bluetooth. When I use the "add a device" wizard on Windows 8.1, my mobile phone is detected, but when I try to add it I get: "Windows doesn't have a network profile for this device".
Also, when I try to detect my computer with my mobile phone, itīs not detected.
I'm using a Trust USB 2.0 dongle Bluetooth adapter (the little one you insert on the usb port) that came with a keyboard and mouse Bluetooth set that I used. Could that dongle be designed only for the bluetooth keyboard and mouse set?
The Bluetooth device seems fine as it already detected your keyboard and mouse. However, your phone seems not supported with the current Bluetooth device and you might need to take another look.
I was updating my graphics card drivers for my graphic card PNY GEFORCE GTX 660 and went to device manager, I used ?automatically search for new driver? and a dialog box appeared "Windows has determined that the driver is up to date".
Yet, I went to Nvidia website and did a driver update. I checked again Device manager for my display adapter and the new driver was TWO MONTHS NEWER.
I wonder why that happens.
So I have 2 images from the Device manager.
The driver has a Yellow caution sign with "!" inside it.
Cannot Connect to wireless, But can connect via Ethernet Cable.
My troubleshooter said the drive couldn't start, and that I needed a Wireless Cable to plugin to the computer.
This is my school computer, my help desk helped before but they are out of office because its summer break.
Device Manager > Components > Problem Devices
Atheros AR5B97 Wireless Network Adapter PCI\VEN_168C&DEV_002E&SUBSYS_E034105B&REV_01\4&124A40C8&0&00E1 This device cannot start.
Also 2 things.
I tried disabling my Bluetooth High Speed, it did nothing.
I do not know if this is the right thread, because this is my first post, if there is anymore information you need to know please contact me.
Hi and welcome to the boards.
How old is this system? Sometimes the wireless card will fail and a new one can be installed.
However, you can upload and install the latest wireless network driver for your system via ethernet cable. Sometimes that is all you need. If it is a built system like a Dell then go to the manufacture's website if this was a system that was built by yourself or someone else then go to the motherboard's website.
Please keep us updated.
Infinity displays are all the rage among notebook buyers these days. Dell's XPS 13 (2015) was an excellent example of what's possible when it launched earlier this year and now, they're bringing the gorgeous screen to its bigger brother.
What's an Infinity screen?... Short answers please, I'm not interested enough to Google it.
Much of the tech press regularly overlooks PCs for wearables, smart homes, and IoT-related topics but, in the real world and to many people, PCs still matter a lot. So, this week's news out of Redmond and Taipei (where the...
No matter what others think about W10.
THIS is not a reason for an upgrade, if one has a choice.
Stay away from -remote host,-cloud centered OS.
Take your hardware and host your stuff by yourself.
Do not accept crippled OS (what unfortunaly OS X (since making iCloud a default location for files, belongs to).
Thanks for any help in advance..
I own a WD MyBook 4TB hard drive, which I've used on Windows for the past 2 years. I got a macbook last week and hooked the drive into it, some error message came up so I figured it wouldn't work, however when I went to plug it back into my windows machine I got the "USB device not recognised" message, the laptop is windows 8. I then tried it on my fathers windows xp computer and it seemed to think it was a completely new hard drive..
I've done some googling on it but I just wanted to ask here incase I went formatting it by mistake or anything..any advice/help would be greatly appreciated.
Sounds like you made some procedural error, allowing the Mac to alter the partition - - bad choice.
Using Windows tools, examine the partition on that drive - - should show up as
somelabel (dl): size HTFS
Healthy (other qualifiers)
Try Control Panel ->Admin Tools->Computer Mgmt->Disk Mgmt
Hi I would appreciate if someone could help me please The problem I have has been going on since about the time I formatted my PC and reinstalled Windows Had issues with BSOD on install because of my graphics card seem to have been slighty dislogded See http www techspot com vb topic html Okey the problem is my mouse keeps freezing up after a while and after moving it or clicking a couple times it works again When this happens I get either a beep or the usb disconnect connect sound depending on which mouse is being used Current using Windows mouse issues freezing 7 Bluetooth Apple Magic Mouse connecting to a generic Windows 7 mouse freezing issues bluetooth dongle this makes a beep when Windows 7 mouse freezing issues it freezes The USB Wireless Logitech Dongle Logitech Mouse I had before this made disconnect connect sound The USB Wired Mouse before the Logitech also made disconnect connect sound I have tried to work around this using several methods but have had no luck Steps taken to try and rectify issue Changed mouse I am on my th mouse now I will not change for another again the mouse is not the problem Tried all the mouses on other computers where they all worked fine I have switched ports on numerous occasions all other device work with no problem keyboard touch screen monitor external hard drive s usb flash I have removed conflicting hardware and ensured only on mouse is plugged in also removed touchscreen cable from monitor I have gone to Device Manager and set USB Root Hub and Power Management tab and unchecked quot Allow the computer to turn off this device to save power quot on all devices I have removed drivers for all other mouse s used previously I have disabled C E as this uses some power saving methods I have check Event Viewer which only has networking errors which all forward to my network drive I have run System File Checker SFC sfc scannow I need to know whether Windows is the issue or whether its the usb ports Can anyone please help me as it is now really bothering me I can t even play Battlefield games Thanks nbsp
This is a problem I have not seen before. Try using this guide to find any other mouse drivers that you may not have deleted.
Ahead of tomorrow's launch of The Witcher 3: Wild Hunt, Nvidia has released a new GeForce graphics card driver that's Game Ready for the open-world action RPG. The GeForce 352.86 drivers are also WHQL certified, meaning they are stable enough for everyday...
Mine were updated hours ago, you just can't beat GFE for this sort of thing (or for game display settings optimisation as far as I'm concerned, it works for me).
I need some professional help.
R9270x BY XFX
NOW, without the graphics card the computer runs fine. When I install the ddriver's for the r9 it will work, but eventually the display driver stopped working makes its way back.
I've ran all diagnostics on the memory and checked temperstures which all turned out to be fine.
I sent the card into xfx and they returned it saying it's fine.
WTF DO I DO MATES. I think it's the card....but that's just me.
I have a Gateway NE56R and ever since I updated to windows 8.1 I cannot use the internet at home even though it says it is connected to WiFi, but it works at other places. Please help asap
I have on same HD-500GB win7 and win xp. I conect another HD-320GB in sata drive. Bios recognize both HD, win 7 too, but win xp recognize only HD-500GB. When I go to disk manager in win xp it's same problem I only see one HD-500GB. Please help me.
I own a custom laptop on an MSI 16F2 platform. Few weeks ago my GTX 670M card died.
Out of better options, I bought an used GTX 660M from an acquaintance.
I had it installed, started Windows and everything looked OK. Then I installed the Nvidia drivers and after reboot, right after the loading screen, I got a black screen (with the screen still lit).
I went into Safe mode and uninstalled the driver. Then installed again and got the same result. Went into Bios, change settings, tried resetting CMOS, nothing worked. Installed Windows 7 Ultimate again, then Windows 8, same thing. I also tried the driver modding instructions on this forum, still nothing.
I have no clue what is wrong. If you have any idea, please help me with this.
I have connected the laptop to an external monitor and it works with the Nvidia driver installed. The laptop screen works just fine without the drivers. I would really appreciate any form of help. Is it maybe the BIOS?
I and Driver responding stopped recovered has purchased an HP-f wm with an Intel N processor about a month ago It s running Windows I also bought a mouse for it since it s not a touch screen that allows me to scroll side to side and makes not having the touch screen easier to Driver stopped responding and has recovered operate The what I thought was Driver stopped responding and has recovered mouse started freezing in the middle of using it to surf the net or working in documents it Driver stopped responding and has recovered just freezes for a bit then starts working again Last night I got an error message after it did this saying the driver had stopped working and recovered I didn t notice that it said which driver I found a fix for this on the Microsoft website but it was for Windows I have tried to do all the updates that it needed when I first got it but I have to do them a few at a time as they fail if I try to do them all at once I have gone through and done several of these one at a time Recent updates have successfully installed it s just the ones needed when I first started using it that are a problem I have about left from Sept-Dec Any advice would be appreciated I got this from Amazon so I have no support nor can I return it nbsp
Try installing the software under "Windows 7" preferances. When you go to install the software (I do not have windows 8.1 myself, just going off Windows 7 features) Right click the installer and go to properties. Under "Compatibility" select "Compatibility Mode" as "Run this program in compatibility mode for" and select Windows 7.
Also select the "Priviledge Level" to make sure there is a checkmark in "Run this program as an administrator"
The other option is to find any driver software that is installed with the mouse and ensure that it is changed to these settings as well. If you want me to go into depth about how to do that I can explain further. But the general idea is to find the .EXE for the software that starts with windows and change the properties to the same as you did with the installer.
hello techspot, I keep getting this error when I play games in my computre. what should I do to fix this error?
I get this error every once and a while. Updating your GPU drivers usually solves the issue. Do you know what GPU you are running? Post your full system specs below and then we can go from there.
Hello I apologize in advance for my almost complete lack of computer knowledge That said my PC was built for me by one of the IT guys at work who has since moved on I can t scare him card Good with Windows 7? graphics compatible up from his last known email addy So I m sort of out there drifting on this stuff trying to find any help I can The PC is connected to the home theater system TV through HDMI About weeks ago and video from the internet stopped producing sound In addition the PC doesn t Good graphics card compatible with Windows 7? play audio dvds anymore And when I click on the samples in the library I can t play them either I m assuming without knowing the graphics card is shot I think it s about four years old I opened up the box pulled out the graphics card I didn t make a note of manufacturer model but my device manager says it s nvidia and the driver is up to date and cleaned it I plugged it back in still no sound I can play youtube videos or stream online content but none of it has sound Does it sound to you guys like I need a new graphics card If so I need a recommendation for a better than average one that is compatible with windows professional something in the range or so Any help would be greatly appreciated Thanks nbsp
Open up nVidia Control Panel.
Under Display select "Set up Digital Audio".
Verify settings to make sure they are correctly set up to send audio.
A while ago, after accidentally opening the Store app, Windows forced me to restart to install Windows 8.1, which I was unable to weeks before because of driver issues. I didn't need Windows 8.1 yet, so I didn't download it before then.
However, during the installation, it failed (again) due to either my antivirus or the aforementioned driver issues. Upon logging back in, my computer was unable to find any WiFi networks. Seeing as I live in the middle of a densely populated city, this isn't possible. Plugging in an ethernet cord still works, so no issues with that adapter or my home internet. I checked all the drivers for my WiFi adapter, and my Ethernet adapter, and both are up to date and display as working properly. Restarting several times didn't seem to fix this issue, and using system restore didn't seem to work either. I used the Troubleshooting tool, and that didn't give my any helpful advice or answers, so I got nothing.
What can I do to fix this issue?
For reference, I have a Broadcom 802.11ac Network Adapter, Driver Version 18.104.22.168, and a Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller, Driver Version 22.214.171.124.
Never mind, it seems to have resolved itself overnight after I put it to sleep for several hours.
Have a nice pair of Bluetooth headphones and trying to get them hooked up to the sound of my older TV. Is there some kind of adapter you can buy to to hook up to the audio out of the TV so I can connect the 2 via Bluetooth? I just don't wanna pay for another pair of headphones. I just want the reciever.
I wonder if anyone could help me shed some light on the best process for the above subject.
I currently have a Dell Studio XPS 435MT (Vista 64bit) running two HDD's in RAID 0 (as from factory) I need to install Windows 7 64bit and would like to also install it onto the new SSD I have bought (Crucial 128GB) as an upgrade.
Could I simply take the current HDD's out (after backing up essential data) to keep safe as backup plan and add the SSD into slot 0 and install Windows 7?? Then possibly add say a 1tb storage drive to the system later?
One solution someone has sent my way is to clone the two 500gb RAID 0 drives to a single 1tb drive then install Windows 7 onto the new SSD and have both drives on a multiboot? Could this work?
I have seen/heard many versions of how to go about this install but no real evidence of a true way?
Any help would be much appreciated.
It takes 3-500GB drives to give you 1.3TB of storage space because of formatting over-head. 2-500GB drives will be considerably less than 1TB. Keep the 2-500's in a single RAID array and set the SSD as a separate partition for Windows 7
Is there a way to connect a displayport monitor to an IBM style PC? Found a new monitor in my brother-in-law estate and was wonder if there is a way to use it. Thanks for any help
If the monitor and the video card in u'r computer have the same connections, and u have a power cable for it. It should work if it is new as u say. Try it and see. That should not cost anything.
Hi all I have a problem thats been ongoing for months and I just cant get it solved so im hoping you can help The problem is that whenever someone speaks in teamspeak ventrilo skype insertvoiphere my game volume drops to almost nil This volumes game Windows ducking is not a problem tied to any individual app as ive been through all the individual fixes to no avail such as volume control plugin disabled etc And the fact that every single voip program does it leads me to it being a windows option somewhere I have also gone into the sounds gt communication and have that set to do nothing It still happens It is not just with Windows ducking game volumes game either I tried different games and the sounds on every single one duck out when someone talks Also another note it also ducks out when I click to run any program on my pc via admin You know when the box pops up asking you if you want to allow this program to make changes to your computer where you click yes When the box pops up and it goes quot beep beep quot at that exact moment the game volume ducks out note - its only ducking game volumes too it doesnt duck out media player youtube vids or anything like this Please please if anyone can help me solve this issue it would be so appreciated Thanks nbsp
I'm assuming that you are on Windows 7? Go to the sound icon on the bottom-right of the desktop, right click and select playback devices. Right click on your default device (Either speakers or an integrated chip set normally) and select properties. Go to the advanced tab and make sure that the Allow applications to take exclusive control of this device box is un-ticked.. and make sure that the give exclusive mode applications prioirty is un-ticked, then report back to see if it has worked (Don't forgot to apply and OK the changes).
Hi, a friend of mine has dropped off a Mac HD to recover some pictures for him. He supplied the HD and a ProBox HDF-SU2. This I would think to be plug and play but no matter what I do including swapping to known good USB sockets the ext dive is not being seen. Windows is not even offering to install a driver for the ProBox HDF-SU2. Any help gratefully received. TIA
Hi guys, I have set up a RAID 0 array using an XFX Revo64 controller card and the Netcell bios setup that cones with it. According to the Netcell bios the array is working but booting into 8.1 I cannot find the drive in explorer and device manager shows the Revo64 as "Generic Mass Storage Controller ".
I am very new to Raid this is the first array I have tried to setup. Any help would be greatly appreciated
Why not use the RAID card as more sata ports and then use windows to make your RAID array? I've never used a controller but im sure that it would work for that purpose.
just go on youtube and find a video on how to setup RAID in windows 8. I know its possible for windows 7 to im pretty sure 8.1 will have it
hi guys wish you all a great new year.
im facing a very annoying issue with my laptop, some keys are not working, the left **** and the windows key I just don't know whats happening.
can someone please help mw with that.
thanks in advance.
I have done everything I can think of. I have windows 7 64 bit. I have disabled/re-enabled sound cards, uninstalled/reinstalled drivers. I have checked all settings I possibly can think of. My head phones work GREAT and on startup I can hear the sound, but once in windows, no sounds through my speakers.
Ive got a 2 yr old laptop that my parents bought for me at walmart of all places. I basically just use it for facebook, facebook games, and email. havent had any real issue til now. at first, when it was plugged in it would start up and let me log into windows but would immediately shut down. later it started going through a disk check when I turned it on and would shut off before it was complete. if the power cord was connected it would have a big red x over the power cord logo on the bottom right. I was going to factory reset it but I cannot get that far before it shuts off. bettery is fine and power cord is good. had them both tested. PLEASE HELP!!! IM VERY POOR SND CANNOT TAKE IT TO A REPAIR SHOP!! tyvm
It won't stay on long enough to do anything so this doesn't look promising. Have you tried removing the battery and just using the power brick?
I am trying to set up my Windows Xp computer as a VPN server I have taken the initial steps I get to the Accept Xp setup VPN hanging server Windows incoming connections screen and click okay The computer hangs for about a minute or so and then comes up with the following message Incoming connections depend on Routing and Remote access Windows Xp VPN server setup hanging service which was unable to start For more information check the system event log I presumed I had to go to control panel performance and maintenance Administrative Tools Event viewer I have already made sure that Routing and Remote access are enabled as well as Telephony I could not find Netbios in the services list and don t know where to Windows Xp VPN server setup hanging look for it Also when I try to start Routing and Remote access service manually I get the following message Windows could not start Routing and Remote access on local computer For more information review the System Event Log If this is a non-Microsoft service contact the service vendor and refer to the service specific error code- Can some one give me a step by step walk through of how to resolve this issue so I can connect to that computer from work over the internet nbsphttp://www.techspot.com/community/topics/windows-xp-vpn-server-setup-hanging.207658/
This is my first thread here, and my english is not that good also, so excuse me for any mistakes
I have my Prestigio PC for a 5 years and there were no problems. But today when I started the PC, a error occured.
On starting screen(American Megatrends GUI) there was written: "Primary IDE Slave: Not Detected" and after a few seconds my screen went black and "reboot and select proper Boot device or insert boot media into selected boot device and press a key" message appeared.
So I thought that I will just need to put my Win 7 CD to the CD-ROM, but then I found out I lost it while we were moving.
My BIOS is also saying that Primary IDE Slave is not detected
Is there any way to solve this problem? Is there any way to boot Win from USB?
Thank you for answers
Have a nice day!
Open up the computer, check that the cables are properly 'seated' (pushed in all the way) on the drive and on the motherboard. I know you said it has worked for several years, but for it not to boot with the Primary IDE Slave not connected the only way that makes sense for this to happen is if the optical drive is jumpered to Master and the hard drive itself to Slave. That is a bit unusual. You typically would have your hard drive as Master and the optical as Slave. It doesn't really matter, as evidenced by it working in the past, it just isn't a 'normal' setup.
If the cables are seated properly (power and data), your drive could have failed.. 5 years is a decent lifespan for a hard drive.
You can make a bootable USB for Windows 7, although you can't without a working computer.
I have a mystery on my hands. I received a Bluetooth speaker as a gift. The BT-4.0 adapter plugged into my computer (USB-2.0 port) detects it (as a "Bluetooth headset"), but when I try to select it as my output device (from the "Sound" Control Panel), Windows reports it as "Disconnected".
If I open "Devices and Printers" and right-click the "Bluetooth headset" icon, I get an alert that the device "Failed to initialize".
I've tried rebooting, tried a different BT adapter, updated my BT drivers off the makers' website, Device Manager shows everything is connected & working (including "Bluetooth Audio").
64bit Win7 Home. Inateck BT-4.0 usb adapter. Speaker is a "MicroBoom" BT v2.1:
PS: Eliminated the obvious. Speaker is fully charged and works just fine with my phone.
Hey guys, I was recently in the malware section, because my laptop had some problems and could not connect to the internet. Broni was very awesome and helped me clear my laptop up, but we still couldn't get it to connect to the internet. He advised me to come here for help.
I will link the previous thread, because there are some log files toward the end I think would be much more helpful than me explaining problems.
Thank you so much for any help.
Can you try to re-install the WiFi driver?
I have two cheepo USB Bluetooth adapters for my Windows 7 PC. One is a tiny generic (thumbnail sized) micro adapter, the other a small "stick" made by Rocketfish.
Both adapters install and "claim" to detect my Bluetooth speaker (misidentifying it as a Bluetooth headset. I have no headset), but the speaker doesn't detect the PC (even when clicking the Discover button.) My cellphone sees my speaker, but it too DOESN'T see my PC.
Are all Bluetooth adapters the same and if my cheap adapters won't pair with anything, neither will an expensive one? Or might there be something else going on?
Do you see any yellow (!) in the device manager when either of the Bluetooth devices are installed?
This all started after I reset the router putting in new pass code I m using same name of the old SSID When you click to Windows SSID was to unable connect on the wireless network connection on the name of my SSID on connect it saying Getting information from SSID this sounds like Windows was unable to connect to SSID good thing that windows can see the router and talk to it Type in the network key same thing looks like windows can see the router and talk Windows was unable to connect to SSID to it I type in the network key and OK Than it is saying windows was unable to connect to SSID name I have set up other computers and it can connect but this one computer running windows cannot I have the pass code down on paper and other computers can connect So wrong pass code is not the case The only thing I can think of is is computers using the old profile or my network card may need to be reset When I open networking sharing center and click on manage wireless networks I removed the old profiles in the list But I m not sure if there is still some kind of conflict or the old setting still there some where Well because I m using the same SSID despite the router reset and new pass code I m not sure why I cannot connect unless Windows was unable to connect to SSID the windows thinks I m connecting to the old SSID I tried to restart the computer and no change nbsp
Force the system to forget that SSD and then reboot.
Now look for it again and enter the passphrase.
I have a Windows 7 HP desktop system that is connected to the internet via an ethernet cable. The system says it is connected, and a ping confirms it is accessing the internet. BUT, all the browsers say the computer is not connected to the internet (tried Chrome, Firefox and IE). All of the Microsoft network adapters (6to4, ISATAP adapter, ISATAP adapter #2, Teredo Tunneling Adapter) shown under device manager cannot start (Code 10). the Realtek PCIe FE Family Controller is the only network adapter shown as working properly. What do I need to do to fix this? Let me know if there is any other information needed to help me.
Does your router see this computer on the network?
Are you on Private Network or Home Network?
Is the IP address showing 192.168.x.x or is it showing 169.xx.xx.xx?
NIC network card you can do a few things. You can can disable it and re-able it.
Open dos prompt
type: ipconfig /flushdns
type: ipconfig /release
type: ipconfig /renew
Give this a sec or two.
Now under services.msc (use the control panel and type services)
Select view local services
Scroll down for
DHCP Client (right click and stop it) wait then right click and start it
DNS Client (right click and stop it) wait then right click and start it
If none of the above work go into the device manager. under control panel type: device manager. click on device manager
-Realtek PCI-e this one uninstall the drivers (BUT DO NOT DELETE THEM)
Two options here.
One: Scan computer for new hardware changes
Two: Reboot the PC
Choose Two, because Windows will re-install the drivers and setup network card settings. for you. The Choosing One would do that same but you really want to flush out any prior issues that got you to this point.
Updated my hardware drivers including the wireless adapter, and something must have gotten changed as I can not connect to wifi anymore on HP Notebook G72-253NR with Windows 7.
Flushed winsock, released/renewed ipconfig and deleted/reinstalled adapter. Can meanwhile connect thru Ethernet cable again but not wifi. Finds my wifi network (previously didn't) but can't connect, don't have tcp/ip addresses in LAC or wireless properties, automatically obtain is enabled. IPv4/6 enabled in both also.
Getting message of "HOST Process was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/Services/VSDATANT? at initial startup.
"COM surrogate was prevented from changing settings of ZoneAlarm by modifying registry key HKCS/services/vsdatant" whenever I simply access/exit ip protocol settings.
How can I fix this? My brain is fried after several DAYS of trying to fix my friends computer... Please someone help!
Call your ISP they will walk you through it.
I had a new PC so I thought I would do a recovery disk on a separate partition of my parent's disk. Turns out windows wipes out everything regardless of partition when it does that. So now lifelong memories are gone and I'm freaking out! I used EaseUS to make different partitions which were deleted. After I found that the partition I chose stayed the same size but was renamed RECOVERY and it had the recovery data in it. However the rest was "unused" and so I dragged the RECOVERY to make full use of the disk and then I started scanning it deeply with hard drive recovery software. I am now through scanning with my 2nd program now (1st one didn't give me the files I needed) and I'm using RecoverMyFiles. The problem is I'm not really getting back any of the files I had deleted by windows, but I get some stupid windows files which were probably deleted in the recovery process!! PLEASE help me!!! I am desperate. Future hanging in balance thank you.
There are quite a few programs you could try, I have had most success with Recuva by Piriform, but recently this program was said to be excellent by a user,
Obviously it's worthwhile trying both of them.
Hi I had this problem a DVD-R 7 Won't Windows Vaio read - couple months ago fixed it and am now facing the same problem again I have a Vaio Windows My CD DVD player isn t reading any of my DVD-R cds Whenever I put in a DVD-R cd autoplay comes up and it asks to format the cd I checked these DVDs and they work on other computers They re all burned DVD with files on them Before when this happened I tried many different things I Deleted upper lower filters -- Actually I didn t have upper or lower filters to delete System restored Deleted and updated drivers Finally found a post talking about creating a new key in the regedit NoCDburning After doing this it started working Fast forward three months later my cd dvd player won t read any Vaio Windows 7 - Won't read DVD-R of my DVD-R cds again I did the same things all over again System restored Deleted and updated re-installed drivers Ran Fixit Looked for upper lower filters -- not there Tried looking at the NoCDburning thing again -- deleted and repeated the steps and nothing is happening I don t want to reboot my computer because I already did a month ago and it just takes way too much time for me to reboot everything all over again I cleaned my CD player as well like most of you guys said before I know my drive is still working as it worked before after I fixed it I checked and the last time this happened was in June Since then the only new things I installed updated were CC Cleaner Itunes and some other programs I have Spybot as well Can someone please please please help me I ve been looking for an answer everywhere and I m running into the same answers Thank you nbsp
Have you tried a a system file check to see if Windows can sort this issue out?
sfc /scannow (in admin mode.)
Also if you just explore the DVD do you see the list of files on it? Or is the DVD-R not 'seen' by Windows at all?
Or is the error only with the autoplay part? (Windows trying to help you choose a media player from whatever you have installed?)
Hello hello After having a problem with my cd dvd drive I rebooted my computer and did a clean install of Windows from my Vista So right now I m running Windows Windows not install (Touch/slider) FN - 7 Clean Keys working I have a VAIO - VGN-CS J Windows looks and feels great so far The only problem is my little sliding touch pad at the top doesn t work I don t know if it s FN keys but on top of my keyboard there s a little sliding touch pad for volume along with a fast forward rewind key I used to be able to slide the volume up from there but now it s not working I looked it up and I know this has to do with my clean install of windows I tried installing a bunch of drivers like everyone said online Sony Shared Libraries Vaio Event Notebook Control Device And a bunch of other drivers that people talked about I don t know what s wrong but it s still not working so I did a system restore to before I installed everything so that I can have a clean slate Can someone please help me fix my volume control slider please Thank you so much nbsp
Laptops have extras over and above Windows and if you reinstall the OS or upgrade it you lose these. I've been there and done that with the FZ. It was broken when I bought it and the hard drive had been removed. Fixing the computer was very hard, installing Windows 7 was easy. Afterwards, like yourself I found that the function keys didn't work. Trawling forums and looking for drivers then sorting it out took ages and that was the most challenging part of the whole exercise. Everything necessary was on the Sony support sites but these were not user friendly and I needed to use several Sony sites. Needless to say Sony support were clueless. In the end I got everything functioning but if you can manage with things as they are I'd not bother. One tip, although it might not work with your particular Vaio model is that stuff has to be installed in a particular order otherwise some keys don't work.
That'll teach you to mess with Windows when a cd/dvd plays up.
My USB drive is enabled. The USB flash drive or any other storage device is recognized when connected to my laptop. But when I click on the drive in windows explorer, it says access denied. The same works fine in other laptops. I have admistror previlages. There is no local group policy set up on Removable storage access. I have searched multiple forums and tried out various options, but still cant connect to my USB drive. The drivers are successfully installed and are the latest. This happens even when I connect my camera or mobile phone. It shows up as 'Removable Disk' in windows explorer, but cant access it. I have given authorization to the drive as well. Please help.
I m trying to configure Surround Sound but Realtek doesn t seem to be installing and it s configuring speakers driver 5.1 Realtek Trouble Sound; issues Surround to driving me nuts I have installed the driver provided by Gigabyte for my motherboard Trouble configuring speakers to 5.1 Surround Sound; Realtek driver issues and it s not doing anything It installs asks me to restart the PC but nothing is Trouble configuring speakers to 5.1 Surround Sound; Realtek driver issues there OS is Windows -bit Gigabyte says that my motherboard supports both and Surround Sound so I don t understand why I can t configure my speakers to run it only lets me use Stereo Device manager only shows High Definition Audio Device and Control Panel doesn t show Realtek at all Realtek Audio Manager doesn t appear either it s not in the system tray icons where I would usually find it Even searching for Realtek brings up nothing other than all the drivers I have downloaded to see if they would work Link to motherboard s Realtek driver as provided by Gigabyte http www gigabyte com products product-page aspx pid dl Link to motherboard s specification http www gigabyte com products product-page aspx pid sp Image showing my device manager gt sound http gyazo com ad b bd e ae a Any ideas as to what the problem is I can t seem to find anything audio related in BIOS either nbsphttp://www.techspot.com/community/topics/trouble-configuring-speakers-to-5-1-surround-sound-realtek-driver-issues.206888/
I pair my Plantronics Calisto PLT Headset to my Desktop Computer (Windows 7 x64), and it showed that everything is OK, but when I tried to use it, it didn't work.
When I press icon of sound on the taskbar and I go to Playback or Recording there is there Bluetooth Hands-free Audio but is Disconnected, and I don't have any idea how to connect this and make to work.
Can someone help me to solve this problem? I will really appreciate any help.
I did everything like supposed to be. I attached few images to show my situation.
Yesterday I bought USB BT400 Adapter.
I started everything from beginning and there is exactly the same situation. Nothing changed. If you look to the picture, everything is pair and installed and when I ask them, they said that was something wrong with Windows configuration (not 100%).
Point is that they didn't have any clue what is wrong.
I didn't mention that before when I installed USB Bluetooth Adapter, and I pair my device in the Playback and Recording devices when I tried to connect it worked for very short time and after this somehow disconnected by itself.
I don't know if I explain well what's happened, but if you want to ask something to make clear, please don't hesitate.
My old hard drive was a sata drive but it failed so I had an old ide 80gb barracuda 7200rpm drive that I wanted to install windows on but when I load the windows installation and goto custom it wont show my drive. My bios detects it its just windows . I tried using diskpart and even formating the drive to ntfs witha complete whip but still no luck .
Perhaps the hard drive's jumper setting is incorrect. Are there any other IDE devices connected on the same cable as the HDD?
Hello...I will start from the begining .
I bought the Acer V5 and tried booting it up...it came with boot-up Linux which means nothing to me so I made a Windows 8 bootable USB and the problems started. First I could'n find the USB and after enabling the Legacy mode it finally found it and booted from it. Turned out the partitions are GPT and as I made the USB MBR it couldn't install so I canceled which I guess was my mistake but there was no other option. After that I created the bootable USB with GPT partition scheme and tried again. Unfortunately this time I got something called GNU GRUB....wth? I googled around and found the commands required for booting - root (hd1,0), then chainloader +1 and finally boot. Then I get the famous The Boot Configuration Data for your PC is missing or contains errors with Status: 0xc000000e. Of course tried that couple of more times but still to no avail. I cannot recover or repair as Windows was never really installed, so I don't know what to do....Hopefully someone here would be able to help. Thanks in advance guys.
I an trying ti install a video graphics card, when I plug in to my pci ex slot and plug in the leads the screen does not work, but the computer does, now I see that I have a pnp monitor but the card and a vga adapter on it, I have tried everything possible but cant get to work, anyone any ideas?????????
Recently I noticed that my laptop speakers aren't working consistently at all. Sometimes I watch youtube, listen to pandora, and everything will work fine. Other times it won't work at all. I've been getting by like this for a week, but now it seems like now the only audio my speakers will play is a notification sound. I still have the computer under warranty, and I can take it into the store and get the speakers fixed. However, I was wondering if there was a way I could skip all the trouble/paperwork of taking it back in? maybe I just clicked something I shouldn't have?
Any tips are hugely appreciated!
I'm wondering whether I can overclock my ASUS R500VD notebook it has an INTEL sandy bridge core I5 3210M 2.50 GHz processor 4GB (max 8) of ram running puppy linux and windows xp home edition SP2 32 bit I have benchmarked it and ill email the results to anyone who replys and gives me their email and if you're wondering why I'm running windows xp read my article in the Alternative OS section of the forums called "If all else is too hard try puppy linux" bye
Nope sorry, the I5 3210M isn't OC enabled.
I have a Windows 8.1 Laptop and yesterday it said I had no connections.
My computer is wireless but then it went to Ethernet it didn't let me connect to anything either.
I tried looking things up to see how to fix it but it just kept talking about buying cables.
Anyone know whats wrong?
You may try to disable your Ethernet adapter (wired connection) while you're connected via a wireless connection through your wireless adapter.
I have an Hp Pavilion that I got about 2 years ago and I do play games on it. One game in general which is League of Legends. My concern is that if anyone knows about this game during teamfights when the computer is operating extensively because of all the action going on I always frame lag. My frames drop only during fights. When nothing is happening my frames are okay. As well other programs on my computer run slowly now as well like windows media player and just when I'm starting programs up on my comp. This happened now so long ago and it was a sudden change. I don't know what to try anymore. I have reformatted my comp and still the same issue. Help would be much appreciated thank you.
The HP Pavilion could be over-heating. After years of use, the CPU's thermal pads and paste become hardened and this causes the CPU to run hotter and hotter causing game play to suffer
I just got a new system that is rather light on the USB ports, so I figured I'd take advantage of the built in bluetooth. That being said are there any bluetooth mice that the users of Techspot either own and like, or find appealing? I tend to like my mice full sized and being contoured for the right hand is a bonus.
Hi, not great with computers and had a look around at various forums and can't find a solution to my problem.
Essentially, whilst I can view the wireless network connections available, I cannot connect to the wireless connection I want to although all other computers at home can connect.
I think the issue is that I have no IP address on this computer (using Windows XP that has just been reinstalled). The result of ipconfig/release is:
No operation can be performed on Wireless Network Connection 2 while it has its media disconnected.
Sorry if further information is required, will provide whatever is needed. Thanks for any help!
First disconnect any wired connection and THEN attempt the wifi.
Something called DHCP is responsible to give the PC an IP address and also the DNS addresses (regardless of wired or wireless).
I have got a new desktop PC, which works fine with Ethernet but I am not able to connect through wireless.When I tried to connect to the broadband, it says error connecting to the Broadband connection
Error 651: The modem (or other connecting device) has reported error. However, same comnnection works very well with my vista home premium Dell Laptop.
Thanks in advance
How to reset TCP/IP by using the NetShell utility
need to know if I can upgrade my graphics card for upgrade to windows 7.
current graphic card:ati radeon 9200 se 128mb ddr tvo
computer :fujitsu siemens scaleo 600
motherboard :microstar ms-6585 2.oa
power supply:dc output 250w
thanks so much.
I don't know if you CAN upgrade your graphics card, but:
You most likely don't NEED to.
It's not really a good idea to upgrade at all. Those parts are old as dirt and you won't find anything cheap that'll fit.
I have an Acer E1-571 suddenly I have an X on my audio controller icon on home page and no audio devices in control panel. I have tried installing sound video and gaming controllers and then tried to install update but it says best already installed and still no Audio.
Any and all help greafully appreciated and many thanks in advance
Look for audio drivers on the motherboard CD delivered to when after purchasing your system. If you can't find it or don't have mobo CD around, navigate to manufacturer website and download driver for audio device from there.
I've recently bought a HP Pavilion 15-n252sq laptop, with Free Dos - unfortunately I can't install Windows 7 over it, due to the following error I keep receiveing in the Installation screen:
"Select the driver to be installed" - and regardless of the paths I have and the available folders, I can not seem to proceed wtih the W7 installation.
Please notice that, I've tried to use both a W7 DVD and also a bootable USB drive (and yes, connected in the USB 2.0 port and not USB 3.0 ) - but I always get to the same point where I have to select drivers.
Please also notice that the BIOS doesn't allow me to make any modifications except for some minor ones (like select boot priority, or enable USB 3.0), as the rest of the MAIN features are greyed out .
Can anyone please help me with this issue?
You may have to use a program Like KillDisk to reformat the drive. Then try installing your Win 7 DVD.
I am writing because from few weeks I can not solve this problem of connection:
if the computer is in safe mode there aren't problems, while in normal mode, the following programs don't connect / update:
Internet Explorer 11, Dropbox, Malwarebytes, Mozilla Thunderbird, Flash player update, Java update, StartUp Delayer.
While Firefox, Chrome, Emsisoft Anti-Malware (Antivirus), Online Armor (firewall), and other programs work and update normally.
I've tried and tried various "solutions" found in the Web and in the Forums, but without any result.
I noticed that Dropbox and StartUp Delayer "tell" me that's is probably a Proxy problem.
I honestly have never used a proxy, and tried in every way possible to disable any proxy, but nothing changed, same issue.
I tried uninstalling antivirus and firewall, but the issue still remain, the same as resetting the connection settings and even Windows Firewall (which is usually disabled).
This problem is present both with ethernet connection and wireless.
I use a HP dv6000 notebook with Windows Professional 64bit.
I thank you if you can help me, because I really don't know how to fix this problem =/
I MIRACULOUSLY solved this situation!
Among the many details I forgot to say that for the connection I use a router, and after several attempts to copy the settings from a computer connected to the same network, I tried to enter the DNS entry of the parameter TCP/IPv4 (in connection properties) 192.168.1.1 and 192.168.1.7 ..and all began to work perfectly.
I can not explain, howeve, why the other computer works even without these two values.
But I'm happy that this (strange) situation is solved, and hope this can help someone else
Have a nice day,
Guys I am looking for a new notebook, and I have general idea of what I want, but I am unable to find anything comparable so far (in reasonable price range, I.e. about 1,500$). Here are the specs which I've in mind:
i7 47xx Processor
8GB RAM (or higher)
GT760M (or similar range GPU)
SSD Boot drive + 1 TB HDD
15.x 1080p display
I have no preference for any brand, although, in last few years I've bought HP notebooks, generally because I have good connections there in case there is some issues
Specify dual or quad core CPU.
So im using a Radeon HD 6870 in my MSI 890gxm-g65.
Installed the hardware and when I run it on on-board graphics, windows is able to detect it as ATI Radeon HD 6800 Series. But after installing the driver for the 6870 it asks for a restart.
The BIOS screen is visible but after the windows loading screen the display just goes off, the LCD in on but it's just black screen.
I have a lot of work to do, so ill be really grateful if someone is willing to help me.
I m officially out of ideas and I m hoping you kind way of operating notebook system No on installing folk here could help me out I have a Hp notebook whose hard disc I formatted while transfering data from it to my computer so I could do a fresh OS When I returned the hard disc into the notebook I found No way of installing operating system on notebook that I could not install Windows by any medium I tried plugging in an external DVD reader and installing windows like I did the first time on this notebook but No way of installing operating system on notebook it would not read from the device BIOS recognises it only as USB LEGACY SUPPORT When I tried installing windows from an USB like I did many times on my computer the screen would freeze when I pressed any key to No way of installing operating system on notebook boot from USB I tried changing USB ports for the devices I used it did not help and I tried changing USB memory sticks from which I booted but alas no success I don t know if there is a way of transfering the files from the dvd onto the hard disc make it bootable somehow and then install the OS on the hard drive the same one I also tried installing other OS using the same methods Windows and XP but have had the same problems P S I haven t tried preinstalling a system on the hard drive on another computer and then inserting the HD into the notebook hoping it would boot I tried that once on a comuter and have had no success Please do help cheers nbsp
Does this help ?
or this ?
I recently built this computer see other a thread on building a PC using Windows on a ssd drive and I used my sata drives for storage audio video The other drives folders using Can't 7 storage create Windows on drives are from my old system and they were set up for RAID I re-formatted the drives but now they automatically create a system info folder and a recycle bin folder I don t know why but Can't create folders on storage drives using Windows 7 I can t create a folder on these drives They are patitioned NTFS Does this have something to do with the RAID configuration from my old system I need to create folders to manage my projects but it will not allow it Also I installed Norton on the system I am using the internet for downloading programs I need once everything is going smooth I will no longer access the web with this PC The Norton has an error on it and when I try to fix it it gets stuck on trying to optimize the storage disk E My SSD is drive C with a partition D for B U the next drive is E Does anyone know what I am doing wrong Thanks to anyone who can speak to this problem nbsp
Which RAID Configuration are you in? I think you may have have it set up incorrectly. Depending on what RAID you are using will depend on how your drives can be used. Let us know what RAID you are running which you should be able to find this in your RAID control panel when you boot into it. Thanks.
We need to restrict several Windows 7 (32) desktops with staff, Server 2003 really does not have anything, same as Win7 GPEDIT, seems to be all or nothing, however,
From the Windows 7 desktop:
- Windows 7 Explorer
- Go to the DVD\CD
- Right-Click Properties
- Advanced Sharing
- ?Share this?
- Add Domain (User1, User2, Etc) or create a Domain group ?AllowWin7CD? and add user to this,
- Remove default ?Everyone?
Anyone see a security or problem with this? Simply sharing as a network resource and assigning domain rights.
Just bought thermal take challenger ultimate keyboard and having a problem when when I plugin the keyboard it override the windows sound and goes off, tried with 2 pcs win 7 and win 8 same thing no sound
want a solution
Got the same problem..
Hello I got a weird one for you guys and I literally have tried everything can think of so I am hoping someone has some new fresh ideas I have a Dell Latitude E that can no longer connect via wired or wireless connections Both adapters display yellow exclamation marks next to them and in the properties of both adapters says Windows cannot install because the drivers are not recognized Error Both adapters are also missing from the adapter page in network settings I have download the most recent versions of the driver and installed no luck I have downloaded previous version of the driver from dell and installed no luck I download the driver directly from Intel and installed no luck Tried a BIOS update nothing Tried to reset to defaults nothing So I decided I would rebuild the is one Windows 31, not NICs weird Error this working 7 machine and SURPRISE that worked for a week and then the problem started again So my first thought is well maybe its a bad motherboard so I swapped the HDD with another Dell E boot it up and NICs not working Windows 7 Error 31, this one is weird both connections are working In the laptop with the drive from the bad laptop it can no longer connect now so the problem is related to windows and follows the drive Does anybody have any idea whats happening hear I am all tapped out of ideas Thanks let me know if you need any additional info Dell E Windows Enterprise auretsky vailresorts com nbsp
"so the problem is related to windows and follows the drive"... Re-install Windows on this drive. Error 31 relates to a bad driver that may be reflected in the device manager
MY WD 500GB USB HD just yesterday stopped working normally, it was working fine two days ago. When I connect the drive via USB it appears as a different drive letter for some reason Local Disk : I then disappears. My laptop makes two noises one that I've connected a device to the laptop then another noise which is when I disconnect a device. It makes this connection/disconnection noise when the HD is plugged in numerous times every minute or so.
The HD doesn't appear in windows explorer but appears in devices.
Very strange and unusual any ideas?
Can anyone assist??
Sorry if it s the wrong section Hi guys I have a problem with my new keyboard I am running Windows and I ve tried on other computer on windows The quot Fn quot key doesn t work On the box it s says the keyboard comes with shorcuts like Fn F Computer If I try a quot test key program quot it doesn t seem to recognize it Please tell me what to do My keyboard I think it s a no-name keybaord quot digittex quot I could not find any drivers for it Please help Take a look at this pic http gyazo com b c a bb ec bcc ee on FN problem Windows 8.1 key d e png That is my keyboard - gt Shows that I have a quot Media quot button I also have play pause volume down and volume up All that are working - gt You can see the images of quot Internet Explorer Favorite Search - gt The windows doesn t recongnize the quot Fn quot key so I cannot acces the keyboard quot shorcuts quot Take a look at this FN key problem on Windows 8.1 pic too http gyazo com eae a f d fbf fb e png That s what it says on the box - gt You can see quot FN quot amp - gt You can see what it supposed to do Ex FN F My Computer Help me please nbsp
I have no idea why this happened, after the update none of the ports on my computer work after booting into windows. bios was updated before this and all was fine. checked in bios if ports were enabled. still no joy. help!!!
I have a 128gb samsung SSD. I was wondering what updates I can remove to get more space on the SSD because windows7+all updates are currently using half of the SSD space and somehow only 119gb of the SSD space is displayed so I'm guessing that 8gb is reserved or something.
I'm currently removing the extra languages and those are giving me and extra 5,5gb space
Somehow I think you have more installed than Windows and updates. Internet Explorer, Bing Bar, and Bing Desktop are the only updates I have hidden. All other Windows Updates have been installed. I wouldn't put all the blame on WIndows, if you have an install using 60GB.
Anyone with more than 8GB memory and still has Pagefile and Hibernation, by default has more than 16GB used by these two files alone. I recommend using them only if needed. I personally don't need them and have removed them both.
Check and see if you have a Hibernation file. If you don't use hibernation features, the file can be removed.
Windows 7 ? Delete Hibernation File (hiberfil.sys)
To turn off or disable hibernation, type the following command at the prompt:
powercfg ?h off
This will disable hibernation and will remove the hiberfil.sys file from your system.Click to expand...
Monitor your memory usage and if you have more memory than you ever use. The Pagefile can be minimized. I currently have mine turned off, with 8GB installed. But caution though if you turn the Pagefile off, Windows will not be able to compensate for a shortage of memory and the Windows session will crash. While I am comfortable not using a Pagefile, I do not recommend others do the same until they are comfortable doing so. I recommend lowering the Pagefile size to 1GB, and if Windows needs more, the size will be automatically adjusted.
I'm using windows 7 on my pc and try to connect to my home wireless connection .
every time I try to connect and enter the password, it won't be connected.
However, I'm using my laptop and phone to connect and it worked properly.
Please help my problem
Thanks in advance
How is your wireless Configured. I have seen many issues when using mixed mode in certain Linksys or Cisco Products. What kind of adapter are you using on y our PC for wireless Connection? Has it ever worked?
I recently changed my motherborad , and I have a new Graphics card and new processeur ,
Graphics Card :
-AMD M880G with ATI Mobility Radeon HD 4250
-AMD Radeon HD 6470M
I used every way to update the graphics card , sometimes it appears the blue screen , and then the drivers never up to date , help me as soon please
Computer : HP pavilion g6 Notebook PC
System : Windows 7 64 bits
this is an image from my computer
Have you worked on or repaired many laptops? English is not your first language?
Is there a way to use bluetooth speakers as well system speakers at the same time?
Using windows 8 6bit
and bluetooth Jawbone Bigjam speakers.
I think yes, but you need to use some other sound output manager. Windows built-in one doesn't support multiple output via different type.
Hi I was wondering what form factor type this Pc has BTX or ATX, if im wrong in saying this please point me in the right direction, I require at least a 500W PSU and I am only purchasing in australia, Maybe from china if on ebay
1gb VRAM (Nvidia Geforce 520)
Intel i7 2600 - Quad core
According the the Manufacturer details, you have a standard ATX PSU so as long as you stick with that, you can fit pretty much any inside your machine. It does look like the 300Watt version inside the machine is a bit short compared to normal PSU's, but as long as you still have space, it should fit just fine.
Acer travelmate Model BY Operating system Windows XP wth servicepack Hi After being reinstalled windows xp the sound of my laptop has been disabled The icon of sound in the right bottom of the screen has been gone And now disabled of being my windows is Laptop after Sound xp reinstalling I got different sound errors sometimes when I go to - start all programs accessries entertainment volume control and then click I got the error that quot there is no active mixer device avaiable On control panel when I click on Sound is being disabled after reinstalling windows xp of my Laptop sound and audio devices I found all the options related to sound are being disabled I also checked out the harware section on MY Comuter the sounds drivers are there but something goes wrong with respect to that I have already downloaded audio vga and someother drivers from us acer com ac en us content drivers and installed them but the problem is still there that is the sound is disabled I would really appreciate on this forum if I can get the solution from someone with respect to that sound problem I am facing I can t want to open my laptop s harware because I cant do that BinNyen nbsp
Do you see any yellow (!) in the device manager?
I am finding this problem to be a bit of a puzzler I have pc s networked together and connected to the internet through a switch and Unable the browse internet 7 to Windows then to a BTrouter all connected via Ethernet cabling None will connect to any page using IE one Unable to browse the internet Windows 7 has google chrome that will open google do a search if Unable to browse the internet Windows 7 I type in a subject but if I try to open one of the found pages it won t open them if I type in a website address same problem If I go into windows Live mail it will send and receive mails suggesting to me that internet is connected I have ran scans with Combofix and Malwarebytes which found next to nothing and booted into safe mode but still no success I can access the software on the routers so that connection is fine Have rebooted router and also changed the router for a different make and still no success both routers seem to tell me that broadband is connected This was all working OK some days ago and then all stopped working Any suggestions would be gratefully received nbsp
Let's try this; using an Admin user login, get the command prompt and then enter:
net stop "dns client"
Quit any existing browser, restart a browser and try Google again.
If you can run like this (btw: it will be slower to resolve the url), then we need to investigate youretc\hosts file. If you still can't surf the net correctly, we need to dig deeper.
Hey guys I ve just picked up a new Lenovo Ideapad y p which has been great thus far A major problem I ve been experiencing though is with the wireless connectivity I ve had minor Wireless Unstable Connectivity with Windows 8 problems like this in the past but only on windows machines and only in this house every mac amp gaming console in the house can use the internet flawlessly and I ve had no problems with connection to networks other than my own on this particular laptop The problem I ll be using the internet normally and all of a sudden I will lose internet access Sometimes the icon remains like this with no connection sometimes it tells me I have limited connection and changes Unstable Wireless Connectivity with Windows 8 to this still no connection and sometimes it disconnects completely this The strange thing about this issue is that disconnecting Unstable Wireless Connectivity with Windows 8 and reconnecting to my network or just reconnecting almost always solves the issue temporarily of course A little background I live in a large house so our wifi is set up pretty weird The main connection comes from a cisco wireless router in the basement that we are using as a wired router directly hooked to the modem Directly connected to the cisco is an apple airport extreme that provides the house with wireless Since the signal doesn t cover the whole house there is also an airport express directly connected to the modem This express sits on the other side of the house and is the closest access point to my computer I have tried changing wireless channels to solve this issue no luck Now I could keep using my internet like this having to disconnect and reconnect every minutes but it gets very frustrating especially when streaming or gaming Any ideas or input would be greatly appreciated thanks nbsp
First I would suggest that you set the MTU to 1492 in the Cisco and all all Airport devices. This will stop what is known as packet fragmentation and reassembly which frequently causes problems.
Secondly, be sure ALL such devices have the latest firmware.
If your ISP connection is using ADSL, ensure all devices plugged into the phone line anywhere in the house have the dsl line filter.
The "limited connection" issue is always a failure to get a response to the DHCP request.
(every mac & gaming console in the house can use the internet flawlessly, and I've had no problems with connection to networks other than my own on this particular laptop).Click to expand...
And this points the finger at the Windows Device Driver - - so look for an updated version for your machine.
I bought an Asus H87M-E. I can't install 3 X 3TB hard drive Raid 5 on this board. It is a new board, I can't find Bois update. I created the Raid5. the O/S displays the drives with different sizes 2048, 745, 1875GB. I have no idea what is happening! Tech support said it is windows problem, But I don't buy that. I broke the raid and try to install the O/S on a single drives, but the O/S recognize it as 745GB.
Windows normally accept only 2 terabyte in re installing the windows you should make a partition for your new 3TB hdd.
Im using a verizon wirleess USB modem (verizon wireless usb551l). It has been working fine for the last month, all of a sudden i start getting this
"windows has detected an ip address conflict"
Ive spoken to verizon, we were nice enough to allow me to get a new device after we spent an hour troubleshooting and still the same problem. Im connected for about 8 minutes then i disconnect and get the pop up with the error. I have been told that i have a windows 7 issue. Im not sure where to look or what do to? any help would be great, thanks in advance
ive tried resetting the IP address, reinstalled software. idk what else to do!
Where did you reset the IP address? I mean in which device did you reset the IP address?
Hey, I recently upgraded my computer to windows 8.1 and I'm having issues recently with fuzzy stuff in my screen.
sometimes this would happen when im browsing a forum..
It's not only this forum its every site with colors and this is an image of the place
after I scroll up.
My system properties..
Laptop, Tosh R945,Win 7 Home Premium
The computer changes the "on battery" brightness to full periodically. I cannot figure out the common theme to this....
I set it to 70% to save battery
sometime later it is 100% again
nobody uses the computer except me
I am not changing it
I have been having an issue for about a week now with my internet 7 Windows connectivity with Issues internet on connection on my PC I could surf the net for hours or Issues with internet connectivity on Windows 7 post in forums for an unlimited amount of time with no connection issues But as soon as I try to play an online game or stream a video song or even download something I seem to get frequent disconnects It s only temporary for example I could log into WoW and for about - seconds everything is fine Then I see a bit of lag and I get disconnected but I can log back in immediately My disconnect doesn t seem to last longer than second If I am buffering a video on YouTube it sometimes stops halfway through and I need to reload the page to get it to start buffering again I did a full clean on my PC with some help from others on this website and after running some programs Broni mentioned that he doesn t see anything malicious on my computer What else could be causing Issues with internet connectivity on Windows 7 these issues Please help nbsp
Specs on the PC?
What OS is in there?
How much RAM?
How fast is the CPU?
Size of HDD?
Network Rated Speed on there?
Desktop or Laptop?
How old is the PC?
Your Internet Service Speed for download and upload?
What do you have? Cable or DSL?
What has changed prior to this issue?
Also see below:
When last did you check the system out for issues?
Clear the Cache/History for the Brower
Scan for pest (Malware) on the HD?
How you ever clean out this box?
Check the vents make sure there are no dust or anything blocking the vents / fans?
Router. When was the last time you did a power cycle, means you turn it on and off.
Modem the same as above.
If on Windows PC if you can get to the Dos Prompt right click on that icon then select Run as Admin.
netsh int reset all
netsh int ip reset
netsh winsock reset
reboot your PC