Windows Support Forum

BSOD on fresh windows8 install

Q: BSOD on fresh windows8 install

So these have carried over from an OLD windows7 build and im about at the end of my troubleshooting knowledge but for proper help im willing to go back to square 1. I haven't got any of the drivers off my mobo manufacturers site on account of them all being VERY slow ftp servers so everything's as windows has set it.

I haven't found what exactly sets them off but they happen when im doing more than a few things so im always distracted.

I just tried to play minecraft(trying to trigger it again) and got ingame and then JVM stopped working, not sure if its related or not.

Relevancy 100%
Preferred Solution: BSOD on fresh windows8 install

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD on fresh windows8 install

Your mini-dumps are not pointing to any driver in particular that I can see. I have found some drivers which you should consider updating to Windows 8 64bit versions or un-installing/removing if not needed:

k57nd60a.sys - Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver: Driver Reference Table
iaStorV.sys - Intel Matrix Storage Manager driver (base) (now is the Rapid Storage Technology (RST) driver):http://www.carrona.org/drivers/search.php?id=iaStorV.sys

Please update these drivers (anything Intel related and the Broadcom Lan Driver), plus anything else you feel should be updated using your manufacturers wesbite:

ASRock > Z77E-ITX

Please make sure you have all the Windows 8 Updates until you can install no more.

-cheers

http://www.eightforums.com/bsod-crashes-debugging/18357-bsod-fresh-windows8-install.html
Relevancy 68.8%

Hi I Fresh fresh system Random install, - BSOD have installed a whole new windows pro x My new Random BSOD - Fresh install, fresh system mobo an ASus p e pro along with new ram pc gskill x ddr running in mhz due to my q Everythingi s running perfectly except some random BSOD total this week I have posted a pack of dump file in here the last ones are the ones that represent the BSOD I had and that I cannot explain the others ones are for various reasons crashes who happenned during installation but Random BSOD - Fresh install, fresh system that I was able to resolve What is weird is that my BSOD only happenned when I was surfing explorer on when the CPU was idle at night with utorrent running today mc pc got BSOD at AM after night or running perfectly it is open since then and running perfectly again All the afternoon for hours it loaded utorrent I cam back from the university and started to play empire total war and lot of MW multiplayer Everything is working perfectly no BSOD But I'm afraid to leave my pc open this night when the BSOD happen I usually have to reboot manually because if it reboot by itself it lead to a DOS screen saying to select a boot device Help me someone I cannot believe me G-skill memory are faulty otherwise they would have failed in-game I suspect nvidia drivers can be responsible for thoses bluescreen The power management tool is not working properly and whatever the option I choose in the nvidia panel it will sometimes lower my frequencies and sometimes it will keep the stock one A strange thing also is that my CPU is lowering it's speed in a kind of power saving option but I turned intel speedstep off so it should not do it should it IS there a problem running pc in mhz I do not want to maintain my FSB to north bridge to mhz all the time cause it heat my system a lot I use that function from time to time for hard gaming sessions crysis for example PLease help Thanks for your help already

A:Random BSOD - Fresh install, fresh system

I think I must also mention that BSOD didnt always give the same message, wich lead me to confusion in my troubleshooting research.

http://www.sevenforums.com/bsod-help-support/55675-random-bsod-fresh-install-fresh-system.html
Relevancy 67.51%

I'm sorry but I'm new of SSD into restarts Fresh 8.1, on BSOD install Fresh at this but I'm at a loss at what I'm suppose to do Just got in the mail ssd's and the HD video card along Fresh install on Fresh SSD of 8.1, restarts into BSOD with a copy of windows complete retail My boot ssd one Fresh install on Fresh SSD of 8.1, restarts into BSOD I'm trying to install on is a gb Mushkin and the other is the one I was going to put games on the gb Mushkin So I hooked the gb one up and put in my install disk for the bit of windows It went through the install fine then it said it needed to restart to complete and when it restarted it gave me the black screen of death It sat there for over minutes then the screen turned to a yellowish orange So I formatted the ssd reinstalled fresh again Same thing I then tried the gb thinking maybe I had a bad ssd Same thing Then I tried an old gb Seagate that I knew worked but I formatted it and installed Same thing So back to the gb I went formatted reinstalled then it did the black screen again So I tried booting over a couple times till it gave me the option to start in safe mode with networking It started in a black screen with the blue windows logo and stayed there for an hour I then tried the command prompt methods of BOOTREC FIXMBR BOOTREC FIXBOOT BOOTREC REBUILDBCD and restarted with same black screen after the rebuildbcd it said copies of windows So I tried to start using the install CD as a recovery drive it brought up the option to install windows I'm not sure how I can get dumps or test stuff if there is no way for me to even get to the actual explorer other than the black screen or the black screen with the blue window logo or even he more rare black screen with underscore blinking Can someone please help me out because after two days I'm at a loss here thanks Mitchell

A:Fresh install on Fresh SSD of 8.1, restarts into BSOD

Hi MitchellTyner,

First, I looked up your motherboard and it does not formally support any OS beyond Windows 7 so that could be an issue right off the bat; however, if you are running the latest BIOS, you could try and set your BIOS to default values and try that clean install without the 7870 first. Then, if it works, you could try installing the 7870 thereafter. BTW, good luck in finding all the correct drivers for your older hardware as well.

Clean Install - Windows 8

my2cents

http://www.eightforums.com/bsod-crashes-debugging/43370-fresh-install-fresh-ssd-8-1-restarts-into-bsod.html
Relevancy 62.78%

My system info is in my profile installing Windows x Ultimate Retail Attached is all of the report info I have no idea what is going on Whenever I try to install all of the Windows updates it blue screens Then it updates, error misc when install install BSOD fresh on codes will reboot try to apply the updates BSOD on fresh install when install updates, misc error codes and blue screen again I've run Linux Server on this machine just fine so I'm fairly certain it's not a hardware issue Also this build is brand new built it a few weeks ago Thanks for your time Things I've Tried - Reinstalling Windows x Ultimate - GPU CPU and RAM stress tests all showed no signs of error - Unplugging extraneous HD's - sfc exe scannow no errors EDIT The main error code seems to be x Just got a new one that is xFC SOLUTION EDIT I disabled core unlocking and everything is magically working I suspect I had a faulty core unlocked Still doesn't explain the stress tests passing but whatever

A:BSOD on fresh install when install updates, misc error codes

This one DMP was related to the following.

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

http://www.sevenforums.com/bsod-help-support/231458-bsod-fresh-install-when-install-updates-misc-error-codes.html
Relevancy 62.78%

I just added a new SSD drive and installed a fresh copy of Win 7 Enterprise. I have had a previous driver issue with this system in the past. The amazing people on this site helped me work it out. Now for the life I just can't seem to sort it out again myself this time.

I ran and uploaded the SF_Diagnostic info in zip file format.

Thank you for any help that can be given.

A:BSOD playing Guild Wars 2, recent SSD install and fresh install of W7

Hello and welcome to Sevenforums.

BSOD ANALYSE


Code:
1: kd> k
Child-SP RetAddr Call Site
fffff880`02f1ffc8 fffff800`02d5c83b nt!KeBugCheckEx
fffff880`02f1ffd0 fffff800`02d271e4 nt!KipFatalFilter+0x1b
fffff880`02f20010 fffff800`02cff3ac nt! ?? ::FNODOBFM::`string'+0x83d
fffff880`02f20050 fffff800`02cfee2d nt!_C_specific_handler+0x8c
fffff880`02f200c0 fffff800`02cfdc05 nt!RtlpExecuteHandlerForException+0xd
fffff880`02f200f0 fffff800`02d0eb81 nt!RtlDispatchException+0x415
fffff880`02f207d0 fffff800`02cd3842 nt!KiDispatchException+0x135
fffff880`02f20e70 00000000`00000000 nt!KiExceptionDispatch+0xc2
Realtek wanted to do a task but it was executed for some reason. Do you have Realtek installed?

Best Regards,
Frederik.

http://www.sevenforums.com/bsod-help-support/250809-bsod-playing-guild-wars-2-recent-ssd-install-fresh-install-w7.html
Relevancy 61.92%

Note I will get an export Persistant on Install, install All Fresh BSOD New Hardware, with DM Log Collector this evening when I get home from work but I wanted to start collecting some opinions on the subject and I do have a BlueScreenView export to hand I was experiencing a BSOD during Windows Pro Fresh Install, All New Hardware, Persistant BSOD on install x installation on a freshly built computer the installation would get to and BSOD with a variety of errors mostly IRQL NOT LESS OR EQUAL After about attempts with different UEFI settings disabled Intel NIC XMP Disabled Updated UEFI etc Fresh Install, All New Hardware, Persistant BSOD on install the install stuck and I was able to load into windows thought this was pure chance In its current state the OS boots up fine and I can log in but I have about minutes before I get a BSOD the like of which are attached in a TXT file from BlueScreenView I will get the proper DM Log Collector files this evening I have tried Checking CPU temperature Degrees C Updating MB UEFIDisabling and disconnecting NICs as I found several threads on google identifying Intel NIC drivers as a possible causeReseating all hardware and power cablesRemoving each stick of RAM in turnInstalling from UEFI and LegacyDifferent media VL image Media Creation Tool Image Installing from USB amp USB PortsWith and without XMPInstalling Chipset drivers in the minute I have in the OSUninstalling video drivers in the minute I have in the OS as I remember hearing about significant issues with Windows and nVidia DriversInstalling latest nVidia Drivers in the minute I have in the OSUninstalling the Intel NIC Drivers in the minute I have in the OSRemoving DISK WD Red TB And I have now reached the point where I am running out of troubleshooting options I do not have any spare components to trial and error with except a spare GTX amp on-board graphics and another power supply I have a few things I plan to try next from reading the forums Disable all but core to highlight a CPU fault if any Manually set DRAM configuration instead of relying on XPM Install a different operating system to help identify if hardware or driver related My System Specs are as follows Motherboard Asus SABERTOOTH Z MARK CPU Intel Core i K S Stock Speeds GFX EVGA GeForce GTX SC GAMING ACX RAM GB x GB Corsair DDR Vengeance LPX Black PC - Non-ECC Unbuffered CAS - - - XMP V CMK GX M B C I have just learned that this memory is not listed in the Qualified Vendors List for my Motherboard an oversight on my part at the time of purchase perhaps the cause http dlcdnet asus com pub ASUS mb PSU W Corsair RM x SeriesOS Windows Pro x DISK GB Samsung EVO quot SSD SATA IIIDISK WD Red TB Any help with this would be much appreciated

http://www.tenforums.com/bsod-crashes-debugging/61216-fresh-install-all-new-hardware-persistant-bsod-install.html
Relevancy 61.92%

Hello from a first timer here I'm using HP pavilion DV - nr gig m gt gig I had Vista bit Prem that ran just fine and I did the Win Prem upgrade It seems to run smooth until I started getting bsod I decided to do a full install of Win Prem from my upgrade disc I booted to the cd formatted my drive partitions it created of after 64bit fresh crashes 7 BSOD install install a mb partition I did the double install way to make the activation work Ok the first install I did not update the firmware and got all kind of bsod etc problems Main culprit then was the wifi card driver I flashed my bios got BSOD crashes after fresh install of 7 64bit install all my updated drivers for everything and did another fresh install which is where I'm today I might not have installed my chip set driver first is only one point I want to point out So I only have MS Security Essentials installed simply because I thought I had this thing whiped Went to shut down and it will not shut down and will hit a BSOD and reboot It continues to do this for some reason It will reboot in safe mode I also noticed if I remove a driver and try to update it the system seems to just hang now One other note I realized last night BSOD crashes after fresh install of 7 64bit install weather or not this is a issue that I have my NAS running WD Myworldbook that I continuously connect to via WiFi I'm attaching my mini dumps and the other two errors that I saw in hopes for some kind of help cause I'm at a loss now I have seen what they have to say to a point but I can not for the life of me fix this issue I really hate to go back to Vista

A:BSOD crashes after fresh install of 7 64bit install

Maybe I should also mention, that I either pulled the drivers from there Hardware sites and if I did not, then I used Hp site. So, I have the latest intel chipset from intel, latest intel wifi from intel and latest nvidia drivers from nvidia website.

There are only like 4 or 5 things starting up. Few of them are nvida driver stuff, MS essientials, touchpad software & can't remember the other two.

This may be another issue, but I have noticed every since I have put Win7 on, while it boots, I get a pop in my speakers??

http://www.sevenforums.com/bsod-help-support/64382-bsod-crashes-after-fresh-install-7-64bit-install.html
Relevancy 60.63%

Hey, I'm installing windows XP onto a 500 g SATA hard disk that I just installed into a Dell Dimension 9100.

I have an .iso file that I need to place onto a DVD to serve as the OS boot disc. My DVD-R is in my Mac. So i need to burn this .iso file on the mac but have it boot the PC..

What is the proper file extension for the dvd file? is there anything I need to do that I'm missing?
 

A:Fresh Windows XP Install on a Fresh Hard Drive using a Burned DVD OS install - PLZ HL

http://hints.macworld.com/article.php?story=20060619181010389
 

https://forums.techguy.org/threads/fresh-windows-xp-install-on-a-fresh-hard-drive-using-a-burned-dvd-os-install-plz-hl.956512/
Relevancy 60.2%

Can anyone tell me how I can resolve this BSOD I have included the dump file It means nothing to meSYSTEM SERVICE EXCEPTION b An exception happened while executing a system service routine Arguments Arg c Exception code that caused the bugcheckArg fffff de b Address of the instruction which caused the bugcheckArg fffff c e e Address of the context BSOD fresh install after record for the exception that caused the bugcheckArg zero Debugging Details ------------------TRIAGER Could not open triage file e dump analysis program triage modclass ini error EXCEPTION CODE NTSTATUS xc - The instruction at x lx referenced memory at x lx The memory could not be s FAULTING IP tbs b fffff de b ff call qword ptr r h CONTEXT fffff c e BSOD after fresh install e -- cxr xfffff c e e rax ffff cd b rbx BSOD after fresh install fffff c f rcx fffffa d rdx rsi fffffa d rdi fffffa d f rip fffff de b rsp fffff c f c rbp fffffa b b r fffff c f r fffffa dbe f r r r fffffa dbe f r fffffa d r r iopl nv up ei pl zr na po nccs ss ds b es b fs gs b efl tbs x b fffff de b ff call qword ptr r h ds b fffffa dbe fd Resetting default scopeDEFAULT BUCKET ID WIN DRIVER FAULTBUGCHECK STR x BPROCESS NAME dvbdream exeCURRENT IRQL LAST CONTROL TRANSFER from to fffff de b STACK TEXT fffff c f c tbs x b FOLLOWUP IP tbs b fffff de b ff call qword ptr r h SYMBOL STACK INDEX SYMBOL NAME tbs b FOLLOWUP NAME MachineOwnerMODULE NAME tbs IMAGE NAME tbs sysDEBUG FLR IMAGE TIMESTAMP e bSTACK COMMAND cxr xfffff c e e kbFAILURE BUCKET ID X x B tbs b BSOD after fresh install BUCKET ID X x B tbs b Followup MachineOwner

A:BSOD after fresh install

I would guess that it's more than just a "fresh install" because the software that's causing your problem is DVB Dream. I googled it & it's a program that allows you to watch satellite TV on your computer. It's not a part of Windows so you must have installed it afterwards. Either that or you have a modified Windows installation disc.

http://www.computing.net/answers/windows-7/bsod-after-fresh-install/18856.html
Relevancy 60.2%

Hi all,

Re-installed Windows 7 ultimate x64 the other day and since then I've had 10 BSOD over the last 5 days. The latest 2x (attachment included) happened this morning after I turned the PC on (before I could do anything).
I don't really have anything loading on start-up either and the BSOD's seem to be random too.
Checked Computer Management and all drivers seem installed.

if you want to see the other BSOD minidumps, just let me know and I can upload them too.

Regards,

A:Often BSOD since fresh install 7 64x ult...

I'm going to go out on a limb here and say it's your logitech webcam.
All the drivers for it are horribly dated (pre windows 7 by date alone)
I would see if there are some updated drivers/software available for the model you have via logitech's website.
Or, remove it.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002a8a7e5, Address of the instruction which caused the bugcheck
Arg3: fffff880037befa0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
OVERLAPPED_MODULE: Address regions for 'luafv' and 'LVMVDrv.sys' overlap

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!SwapContext_PatchXSave+42
fffff800`02a8a7e5 4983be1801000000 cmp qword ptr [r14+118h],0

CONTEXT: fffff880037befa0 -- (.cxr 0xfffff880037befa0)
rax=0000000000000000 rbx=fffff88002dd3180 rcx=0000000000000001
rdx=0000002d00000000 rsi=fffffa8003323060 rdi=fffff88002dddfc0
rip=fffff80002a8a7e5 rsp=fffff880037bf970 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000f44 r10=fffff80002a14000
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=ffbffa8004b93060 r15=fffff88002dd7f40
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246
nt!SwapContext_PatchXSave+0x42:
fffff800`02a8a7e5 4983be1801000000 cmp qword ptr [r14+118h],0 ds:002b:ffbffa80`04b93178=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x3B

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80002a8a7e5

STACK_TEXT:
fffff880`037bf970 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!SwapContext_PatchXSave+0x42
FOLLOWUP_IP:
nt!SwapContext_PatchXSave+42
fffff800`02a8a7e5 4983be1801000000 cmp qword ptr [r14+118h],0

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: nt!SwapContext_PatchXSave+42

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4e02aa44

STACK_COMMAND: .cxr 0xfffff880037befa0 ; kb

FAILURE_BUCKET_ID: X64_0x3B_nt!SwapContext_PatchXSave+42

BUCKET_ID: X64_0x3B_nt!SwapContext_PatchXSave+42

Followup: MachineOwner
---------

3: kd> lm t n
start end module name
fffff800`00b96000 fffff800`00ba0000 kdcom kdcom.dll Sat Feb 05 06:21:45 2011 (4D4D40D9)
fffff800`02a14000 fffff800`02ff0000 nt ntkrnlmp.exe Wed Jun 22 21:51:48 2011 (4E02AA44)
fffff800`02ff0000 fffff800`03039000 hal hal.dll Mon Jul 13 20:27:36 2009 (4A5BDF08)
fffff880`00c04000 fffff880`00c11000 mcupdate_AuthenticAMD mcupdate_AuthenticAMD.dll Mon Jul 13 20:29:09 2009 (4A5BDF65)
fffff880`00c11000 fffff880`00c25000 PSHED PSHED.dll Mon Jul 13 20:32:23 2009 (4A5BE027)
fffff880`00c25000 fffff880`00c83000 CLFS CLFS.SYS Mon Jul 13 18:19:57 2009 (4A5BC11D)
fffff880`00c83000 fffff880`00d43000 CI CI.dll Mon Jul 13 20:32:13 2009 (4A5BE01D)
fffff880`00d43000 fffff880`00de7000 Wdf01000 Wdf01000.sys Mon Jul 13 18:22:07 2009 (4A5BC19F)
fffff880`00de7000 fffff880`00df6000 WDFLDR WDFLDR.SYS Mon Jul 13 18:19:54 2009 (4A5BC11A)
fffff880`00e00000 fffff880`00e1a000 mountmgr mountmgr.sys Mon Jul 13 18:19:54 2009 (4A5BC11A)
ffff... Read more

http://www.sevenforums.com/bsod-help-support/193963-often-bsod-since-fresh-install-7-64x-ult.html
Relevancy 60.2%

Hey guys I have a client that was having did - BSOD install fresh Just problems with her machine crashing Brand new BSOD - Just did fresh install Dell Optiplex Intel Core Duo Ghz GB Win Pro Bit Intel Graphics Running Vipre Antivirus Mozy Online Backup and variety of other programs Word Office HotDocs I formatted the machine the other day as she was having problems originally so I decided to wipe the preloaded image and start over Today day later she was having problem connecting remotely using Logmein Pro WhoCrashed On Fri PM GMT your computer BSOD - Just did fresh install crashed crash dump file C Windows memory BSOD - Just did fresh install dmp This was probably caused by the following module cdd dll cdd xDC Bugcheck code x xFFFFF C A x xFFFFF BDC x Error PAGE FAULT IN NONPAGED AREA file path C Windows system cdd dll product Microsoft Windows Operating System company Microsoft Corporation description Canonical Display Driver Bug check description This indicates that invalid system memory has been referenced This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in a standard Microsoft module Your system configuration may be incorrect Possibly this problem is caused by another driver on your system which cannot be identified at this time I attached the memory dump but I have been beating my head on this Was going to remove Vipre for a week and see how it goes but I haven't had any issue with this AV before

A:BSOD - Just did fresh install

Your RaInfo.sys, part of LogMeIn seems to be the cause. Please remove this software

http://www.sevenforums.com/bsod-help-support/158716-bsod-just-did-fresh-install.html
Relevancy 60.2%

hey I just installed Windows Ultimate bit after Fresh BSOD Install on my PC But from time to time I got a BSOD this is a new fresh clean install The only thing I have done is updating drivers and windows updates I do have one windows update that won t install KB code B I did Memtest I tested my rams separately both in the slots they were located all passed up to tests without any errorsSFC Scannow no errors all fineShckdsk in step it replaced files replaced bad clusters BSOD after Fresh Install in file Prime could not start the blend test hardware error occurredThanks in advance Here is my BlueScreenView Logs Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c d Parameter fffff d Parameter fffff abb b Parameter Caused By Driver win k sys Caused By Address win k sys File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe f BSOD after Fresh Install c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter fffff f Parameter Parameter Parameter fffff db Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter fffff ec c Parameter Parameter Parameter fffff b db Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff a Parameter fffff bad Parameter Caused By Driver cdd dll Caused By Address cdd dll a File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String DRIVER CORRUPTED MMPOOL Bug Check Code x d Parameter fffff c Parameter Parameter Parameter fffff c Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String PAGE FAULT IN NONPAGED AREA Bug Check Code x Parameter fffffa c c Parameter Parameter fffff fcdc Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win sp gdr - Processor x Crash Address ntoskrnl exe f c Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size Dump File - - dmp Crash Time Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter Parameter fffff Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe f c File Description NT Kernel amp System Produc... Read more

A:BSOD after Fresh Install

Hello zyon1989,The BlueScreenView report is varied and can implicate many causes.Memtest86: I tested my 2 rams separately both in the 2 slots they were located, all passed up to 9 tests without any errorsI hope you meant "9 passes" as 9 tests aren't even one pass. For moderate confidence in the memory, I would recommend running the test for 12 hours (overnight). There should be no errors reported.Shckdsk: in step 4 it replaced 2 files: replaced bad clusters in file ...Let's have a look at that Check Disk report:In the search box type "Event" and click on "Event Viewer" in top column.Click on "Windows Logs" -->"Application." Click the "Source" tab ( top, right) to alphabetize that column.Arrow down to "Winlogon" and select the most recent Check Disk report.Double click on it and select the "Copy" button. This will copy the report to the clipboard.Copy this into your next post.To help us get a better look at your computer hardware, please follow the instructions below to "Publish a Snapshot" of your system using Speccy.http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792Below is for those who cannot get online:Please take caution when attaching a text file to your post if you cannot copy/paste the link, per above instructions. You will need to edit the text file to make sure that your Windows Key is not present.

http://www.bleepingcomputer.com/forums/t/466305/bsod-after-fresh-install/
Relevancy 60.2%

I installed an SSD and put a new copy of win 7 pro on it, within a day it crashed. I rarely ever see the BSOD, I usually see the windows has recovered from an unexpected error screen.

The new installation only has a few application installed, mostly just window updates, microsoft security essentials, steam.

I ran memtest and didnt come up with any errors.

A:fresh install still get BSOD

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 00005a800ac1c3bb, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002a8a3c9, address which referenced memory

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cb1100
GetUlongFromAddress: unable to read from fffff80002cb11c0
00005a800ac1c3bb Nonpaged pool

CURRENT_IRQL: 2

FAULTING_IP:
nt!MiUnlinkPageFromLockedList+169
fffff800`02a8a3c9 410fb6511b movzx edx,byte ptr [r9+1Bh]

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: csrss.exe

TRAP_FRAME: fffff88007baf5d0 -- (.trap 0xfffff88007baf5d0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000020000395ebe rbx=0000000000000000 rcx=00000000003960a7
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002a8a3c9 rsp=fffff88007baf760 rbp=0000000000000000
r8=fffff88007baf790 r9=00005a800ac1c3a0 r10=0000000000000001
r11=0000000000000001 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
nt!MiUnlinkPageFromLockedList+0x169:
fffff800`02a8a3c9 410fb6511b movzx edx,byte ptr [r9+1Bh] ds:00005a80`0ac1c3bb=??
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff80002a791a9 to fffff80002a79c00

STACK_TEXT:
fffff880`07baf488 fffff800`02a791a9 : 00000000`0000000a 00005a80`0ac1c3bb 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`07baf490 fffff800`02a77e20 : fffff880`07baf670 fffffa80`10d36ca0 fffff880`00000000 fffffa80`0ac1f370 : nt!KiBugCheckDispatch+0x69
fffff880`07baf5d0 fffff800`02a8a3c9 : fffffa80`0abf2340 00000000`00000005 fffff800`02cb4d48 fffff680`00021240 : nt!KiPageFault+0x260
fffff880`07baf760 fffff800`02aaa06b : fffffa80`0ac1f370 fffffa80`0dc24ec8 00000000`00000000 0004d80c`00000080 : nt!MiUnlinkPageFromLockedList+0x169
fffff880`07baf7e0 fffff800`02a96c8f : 00000000`00000001 00000000`00000000 fffffa80`113f0000 fffffa80`0dc24ec8 : nt!MiResolveTransitionFault+0x16b
fffff880`07baf870 fffff800`02a86179 : fffffa80`113f9420 ffffffff`ffffffff fffffa80`0f2d7b50 00000000`00000000 : nt!MiDispatchFault+0x95f
fffff880`07baf980 fffff800`02a77d2e : 00000000`00000001 00000000`042490ae 00000000`0049bb01 00000000`004066c0 : nt!MmAccessFault+0x359
fffff880`07bafae0 00000000`76fc676f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
00000000`057dedd0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76fc676f
STACK_COMMAND: kb

FOLLOWUP_IP:
nt!MiUnlinkPageFromLockedList+169
fffff800`02a8a3c9 410fb6511b movzx edx,byte ptr [r9+1Bh]

SYMBOL_STACK_INDEX: 3

SYMBOL_NAME: nt!MiUnlinkPageFromLockedList+169

FOLLOWUP_NAME: MachineOwner

MO... Read more

http://www.sevenforums.com/bsod-help-support/286295-fresh-install-still-get-bsod.html
Relevancy 60.2%

Hello. I'm working on my cousins computer. Upon starting windows i catch a BSOD 75% of the time. Other times it will freeze on the "Starting Windows" screen.

I've used UBCD to format the HDD
I've used UBCD Memtest86 - Test passed
I've tried using the system restore disk provided by the manufacturer
I've physically inspected the computer and have reseated power cables and RAM

Please help, Any input would be greatly appreciated!

A:BSOD after fresh install

  
Quote: Originally Posted by Nano3


Hello. I'm working on my cousins computer. Upon starting windows i catch a BSOD 75% of the time. Other times it will freeze on the "Starting Windows" screen.

I've used UBCD to format the HDD
I've used UBCD Memtest86 - Test passed
I've tried using the system restore disk provided by the manufacturer
I've physically inspected the computer and have reseated power cables and RAM

Please help, Any input would be greatly appreciated!


Boot into safe mode (or boot from win 7dvd) and find DMP files to upload to us.


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/177804-bsod-after-fresh-install.html
Relevancy 60.2%

Hello fellow PC users

I recently installed Windows 8.1 Pro x64 and the correct up to date drivers for my hardware. I experience a BSOD, it doesn't go into the BSOD right away but after 15-30 minutes of use I get the BSOD with the "page fault in nonpaged area" message.


I have attached my debugfiles and hope that someone much brighter than me in deciphering these files can lend me a hand at fixing this issue.

Any help is greatly appreciated!

Found out it was my new Panda Cloud Free Antivirus. I deleted the POS and installed something else, now no more BSODs.

A:BSOD on fresh Win 8.1 Pro x64 install

Hi DamZe & Welcome to the forums ^_^,

Thanks for posting back the solution ^_^.

If you uninstalled the product directly then please make sure that you run this **TOOL** so that the leftover files are deleted of the Panda Cloud AV.

http://www.eightforums.com/bsod-crashes-debugging/52994-bsod-fresh-win-8-1-pro-x64-install.html
Relevancy 60.2%

Hi all,

I'm getting pretty desperate... I have a new Sony Vaio laptop on which I installed a clean Windows and all original drivers. As I kept getting BSODs I decided to do a fresh install, but now I get BSODs even without any drivers installed.

Could anyone check this minidump to try and find out what is causing this? Don't feel like tossing out a brand new laptop...

Thanks a bunch!
Sis
Attachment 154772

A:BSOD after fresh install

Stop 0x124:

BugCheck 124, {0, fffffa80067b1028, ba000000, 400405}
Stack: nt, hal
Probably caused by : hardware

(Stop 0x124 - what it means and what to try)

1. Check the hardware settings:

- cpuz MEMORY tab
- cpuz CPU tab
- Passmark RAMMon HTML.zip

A good idea to check for drivers drivers too,
(although with hal on stack driver updates won't fix you, just a good idea)

2. Citrix Deterministic Network Enhancer
dne64x.sys Mon Nov 10 20:01:24 2008


3. Sony Firmware Extension Parser
SFEP.sys Fri Nov 27 00:39:13 2009





CRASH DUMPS


Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [F:\DMP\051611-69716-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`0281d000 PsLoadedModuleList = 0xfffff800`02a5ae50
Debug session time: Mon May 16 07:26:46.461 2011 (UTC - 4:00)
System Uptime: 0 days 0:26:57.982
Loading Kernel Symbols
...............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80067b1028, ba000000, 400405}

Probably caused by : hardware

Followup: MachineOwner
---------

7: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80067b1028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000ba000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000400405, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: McShield.exe

CURRENT_IRQL: f

STACK_TEXT:
fffff880`0318eb58 fffff800`02e0b903 : 00000000`00000124 00000000`00000000 fffffa80`067b1028 00000000`ba000000 : nt!KeBugCheckEx
fffff880`0318eb60 fffff800`029a34d3 : 00000000`00000001 fffffa80`067a8510 00000000`00000000 fffffa80`067a8560 : hal!HalBugCheckSystem+0x1e3
fffff880`0318eba0 fffff800`02e0b5c8 : 00000000`00000728 fffffa80`067a8510 fffff880`0318ef30 fffff880`0318ef00 : nt!WheaReportHwError+0x263
fffff880`0318ec00 fffff800`02e0af1a : fffffa80`067a8510 fffff880`0318ef30 fffffa80`067a8510 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`0318ed50 fffff800`02e0add5 : 00000000`00000008 00000000`00000001 fffff880`0318efb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`0318ed90 ... Read more

http://www.sevenforums.com/bsod-help-support/163542-bsod-after-fresh-install.html
Relevancy 60.2%

Windows 7 x64 Ultimate, not OEM. Hardware is 8 months old, OS was freshly reinstalled 3 days ago. Based on the most recent dump this appears to be related to my Linksys WMP54gs and a possible incompatibility with Windows 7. I have already RMA'd my RAM and the new modules passed a mem test.
The OS drive passed a diagnostic test as well.
The blue screens tend to occur when browsing the internet. Any help is appreciated.

Thanks

A:Win 7 x64 Ult BSOD after fresh install

  
Quote: Originally Posted by neowizard87


Windows 7 x64 Ultimate, not OEM. Hardware is 8 months old, OS was freshly reinstalled 3 days ago. Based on the most recent dump this appears to be related to my Linksys WMP54gs and a possible incompatibility with Windows 7. I have already RMA'd my RAM and the new modules passed a mem test.
The OS drive passed a diagnostic test as well.
The blue screens tend to occur when browsing the internet. Any help is appreciated.

Thanks


Actually two of these point to your broadcom wireless driver bcmwi664.sys. I would reinstall that and see how it goes. There is a hardware problem of some sort but until you fix the wifi driver we cant tell for sure
Ken


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\090310-16816-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

WARNING: Whitespace at end of path element
Symbol search path is: SRV*C:\symbols;*http://msdl.microsoft.com/download/symbols ;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02a5a000 PsLoadedModuleList = 0xfffff800`02c97e50
Debug session time: Fri Sep 3 12:33:04.600 2010 (GMT-4)
System Uptime: 0 days 0:12:34.161
Loading Kernel Symbols
...............................................................
................................................................
....................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {ffffffffffffff81, 1, fffff88003a0c001, 0}

Unable to load image \SystemRoot\system32\DRIVERS\bcmwl664.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for bcmwl664.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl664.sys

Could not read faulting driver name
Probably caused by : hardware ( nwifi!Pt6RepackRecvNBL+99d )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: ffffffffffffff81, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff88003a0c001, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------
Could not read faulting driver name

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d020e0
ffffffffffffff81

FAULTING_IP:
nwifi!Pt6RepackRecvNBL+99d
fffff880`03a0c001 c0741081fd sal byte ptr [rax+rdx-7Fh],0FDh

MM_INTERNAL_CODE: 0

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: System

CURR... Read more

http://www.sevenforums.com/bsod-help-support/108881-win-7-x64-ult-bsod-after-fresh-install.html
Relevancy 60.2%

ok so win ult x64, install! BSOD after fresh 7 i have an alienware area with dual nvidia gtx video cards i was getting constant bluescreens so i spoke to alienware crapsupport and they told me to reinstall windows which i did low and behold a few minutes in i start getting blue screens At first the bsdo were in regards to the iastor driver which i updated and then the blue screens switched over to ntoskrnl blue screen but this BSOD win 7 ult x64, after fresh install! last bsod was iastor again not sure what to do I am not sure what else to look for i have attached the last few dmps BSOD win 7 ult x64, after fresh install! in hopes someone can help me i am having to post this from safe mode it doesnt stay on long enough in regular mode to post specs gb ram dual gtx video cards raid ssd drives for C and raid for data drive tb sata drives i am attaching a zip of the last few dmps as well as a screenshot from bluescreenviewer and device manager with some driver version any help would be much appreciated thanks

A:BSOD win 7 ult x64, after fresh install!

Hi and welcome to SF

You need to update your Intel Storage drivers

http://downloadcenter.intel.com/Default.aspx

http://downloadcenter.intel.com/Deta...-bit*&lang=eng


Finish with this step and post back with any results.

http://www.sevenforums.com/bsod-help-support/192741-bsod-win-7-ult-x64-after-fresh-install.html
Relevancy 60.2%

Hi so this is a fresh install of Windows 7 Ultimate x64 and today I was just browsing in Firefox when I got a BSOD. I am thinking the problem is my motherboard since I have had a lot of BSOD in the past with this board.

A:Fresh Install BSOD

Hi Casanova89 and Welcome to the Forum.

STOP 0x0000004E: PFN_LIST_CORRUPT
Usual causes: Device driver, ?memory

Your latest dump file indicates memory corruption as the probable cause which usually indicates out of date Drivers or Bad Memory.
Old and incompatible drivers can and do cause issues with Windows 7, often giving false error codes.

As a Priority:

ASACPI.sys Mon Mar 28 03:30:36 2005 This driver is notorious for causing BSOD's. There is an update here: Asus ATK0110 driver. Look under the sub-heading: Utilities. Approx. 12th one down.

Driver Install - Manual method
Download the driver and extract it to a folder
Open the Device Manager
Right click the device you wish to change the drivers for. You can select Properties > Driver > Driver Details to check you have the right device.
Choose Update Driver Software.
Select Browse My Computer For Driver Software.
Select Let me pick from a list of device drivers on my computer.
Select Have disk...
Select Browse..
Navigate to the extracted folder and double click on the .inf file
Hit OK, then Next and the driver(s) will then begin to install.
Bugcheck Analysis:
Code:
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`02c03000 PsLoadedModuleList = 0xfffff800`02e48e90
Debug session time: Mon Apr 18 22:10:32.610 2011 (UTC + 1:00)
System Uptime: 0 days 1:11:10.779
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4E, {99, 706f1, 0, 1}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PFN_LIST_CORRUPT (4e)
Typically caused by drivers passing bad memory descriptor lists (ie: calling
MmUnlockPages twice with the same list, etc). If a kernel debugger is
available get the stack trace.
Arguments:
Arg1: 0000000000000099, A PTE or PFN is corrupt
Arg2: 00000000000706f1, page frame number
Arg3: 0000000000000000, current page state
Arg4: 0000000000000001, 0

Debugging Details:
------------------
BUGCHECK_STR: 0x4E_99

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80002d08f5c to fffff80002c83640

STACK_TEXT:
fffff880`05c8a188 fffff800`02d08f5c : 00000000`0000004e 00000000`00000099 00000000`000706f1 00000000`00000000 : nt!KeBugCheckEx
fffff880`05c8a190 fffff800`02c2b28d : fffff680`00017860 00000000`02f0c000 fffffa80`060dde08 00000000`00000000 : nt!MiBadShareCount+0x4c
fffff880`05c8a1d0 fffff800`02c79071 : b4000000`00000000 fffff680`00017860 00000000`00000200 000fffff`00000001 : nt! ?? ::FNODOBFM::`string'+0x336c8
fffff880`05c8a250 fffff800`02c70852 : fffff800`02e08c00 00000000`00000000 fffffa80`060dda70 fffffa80`060dde08 : nt!MiDecommitPages+0x1a1
fffff880`05c8aae0 fffff800`02c828d3 : ... Read more

http://www.sevenforums.com/bsod-help-support/157906-fresh-install-bsod.html
Relevancy 60.2%

I just installed a new SSD yesterday. I did a fresh install of windows and formatted my previous hard drive to use as a storage drive.

It worked fine all day without an error. I started her up tonight and got a PFN_LIST_ERROR BSOD. I understand that installing a new SSD can have issues, so I want to pinpoint what this issue is so that I can nip it in the bud now and not have to worry about it later.

Attatched are the files requested, as well as the original dump.

A:BSOD new SSD fresh install

Hi -

The system crashed just 2 seconds after boot-up.

From the partition info, it appears to me that both the 120 GB OCZ-AGILITY3 SSD and the 1 TB ST31000524AS SATA HDD have Windows OS installed.

Disconnect the HDD; reinstall Windows 7 onto the SSD.


Regards. . .

jcgriff2


`



BSOD SUMMARY

Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\012412-5631-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Jan 24 22:22:59.982 2012 (GMT-5)
System Uptime: 0 days 0:00:02.215
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+175b6 )
BUGCHECK_STR: 0x4E_7
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x4E_7_nt!_??_::FNODOBFM::_string_+175b6
Bugcheck code 0000004E
Arguments 00000000`00000007 00000000`00204131 00000000`00000001 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``

http://www.techsupportforum.com/forums/f299/bsod-new-ssd-fresh-install-626516.html
Relevancy 60.2%

First off I think it's my graphic card drivers that have been giving me problems so in a another BSOD for and install now Fresh one I while get a fresh install I hoped to fix that but I had one BSOD last night I would be thankful if someone could have a quick look at my dumps It says I'm BSOD for a while now Fresh install and I get another one not using a virus program in the file but I am using Microsoft Security Essentials and MalwareBytes Installed my Drivers in Driver Genius Operating System bit Windows Retail Using a Radeon Hd Who Crashed gave me this This was probably caused by the following module ntoskrnl exe nt x Bugcheck code x B xC xFFFFF A xFFFFF FE A x Error SYSTEM SERVICE EXCEPTION file path C Windows system ntoskrnl exe product Microsoft Windows Operating System company Microsoft Corporation description NT Kernel amp System Bug check description This indicates that an exception happened BSOD for a while now Fresh install and I get another one while executing a routine that transitions from non-privileged code to privileged code This appears to be a typical software driver bug and is not likely to be caused by a hardware problem The crash took place in the Windows kernel Possibly this problem is caused by another driver which cannot be identified at this time

A:BSOD for a while now Fresh install and I get another one

Just had another BSOD whilst watching a Video on my pc.

On Sat 08/10/2011 13:06:44 GMT your computer crashed
crash dump file: C:\Windows\Minidump\100811-36613-01.dmp
uptime: 00:33:28
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x1A (0x41287, 0x0, 0x0, 0x0)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

http://www.sevenforums.com/bsod-help-support/190648-bsod-while-now-fresh-install-i-get-another-one.html
Relevancy 60.2%

I recently installed Windows 7 Ultimate 64 Bit onto a partition on my harddrive. I didn't do a clean install due to needing a few things from a beta install of Windows 7 32 bit on another partition.

Currently, the computer runs fine, other than when running flash (through youtube) or bitlord it seems to get the bsod. I'm currently only using firefox with the newest flash plugins installed due to no 64 bit support yet. I've only installed the drivers that windows 7 has given me along with:

Adobe Creative Suite
Aim 7
K-Lite Codec
Magic Disc
Magic Iso Maker
Microsoft Office Enterprise
Mozilla Firefox
VLC Media Player

A:BSOD After fresh install

  
Quote: Originally Posted by Seraphinax


I recently installed Windows 7 Ultimate 64 Bit onto a partition on my harddrive. I didn't do a clean install due to needing a few things from a beta install of Windows 7 32 bit on another partition.

Currently, the computer runs fine, other than when running flash (through youtube) or bitlord it seems to get the bsod. I'm currently only using firefox with the newest flash plugins installed due to no 64 bit support yet. I've only installed the drivers that windows 7 has given me along with:

Adobe Creative Suite
Aim 7
K-Lite Codec
Magic Disc
Magic Iso Maker
Microsoft Office Enterprise
Mozilla Firefox
VLC Media Player


Hi and welcome

this crash was probably caused by your wifi driver wusb54gv4x64,sys. It is from 2006 and needs to be updaged

Ken J+


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\012110-36000-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a68000 PsLoadedModuleList = 0xfffff800`02ca5e50
Debug session time: Thu Jan 21 10:46:42.329 2010 (GMT-5)
System Uptime: 0 days 16:14:38.938
Loading Kernel Symbols
...............................................................
................................................................
......................
Loading User Symbols
Loading unloaded module list
.............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\WUSB54Gv4x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for WUSB54Gv4x64.sys
*** ERROR: Module load completed but symbols could not be loaded for WUSB54Gv4x64.sys
Probably caused by : WUSB54Gv4x64.sys ( WUSB54Gv4x64+2d7cf )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------
EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully.

FAULTING_IP:
+5d04952f02a1dd34
00000000`00000000 ?? ???

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: 0000000000000000

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x1E

PROCESS_NAME: System

CURRENT_IRQL: 2

EXCEPTION_RECORD: fffff88002d1b5b8 -- (.exr 0xfffff88002d1b5b8)
ExceptionAddress: fffff88... Read more

http://www.sevenforums.com/bsod-help-support/57250-bsod-after-fresh-install.html
Relevancy 60.2%

I have an HP tx 8 Win Install BSOD on Fresh z- AMD Turion BSOD on Fresh Win 8 Install X Dual-Core Mobile RM- GHz gb Ram ATI Radeon HD running windows -bit I've tried installing Windows a few times each time keep getting bluescreens I did a fresh install tonight and immediately got BSODs I downloaded BlueScreenView and have copied pasted the info from the dumps below Any suggestions would be most helpful BSOD Dump File - - dmp Crash Time PM Bug Check String NTFS FILE SYSTEM Bug Check Code x Parameter b b Parameter fffff df e Parameter fffff defd Parameter fffff c f Caused By Driver Ntfs sys Caused By Address Ntfs sys cf File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe b Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size BSOD Dump File - - dmp Crash Time PM Bug Check String KMODE EXCEPTION NOT HANDLED Bug Check Code x e Parameter ffffffff c Parameter fffff e f Parameter Parameter ffffffff ffffffff Caused By Driver Ntfs sys Caused By Address Ntfs sys File Description Product Name Company File Version Processor x Crash Address ntoskrnl exe b Stack Address Stack Address Stack Address Computer Name Full Path C Windows Minidump - - dmp Processors Count Major Version Minor Version Dump File Size

A:BSOD on Fresh Win 8 Install

Just had another bluescreen:

BSOD 3
==================================================
Dump File : 112212-18283-01.dmp
Crash Time : 11/22/2012 9:35:36 PM
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : ffffffff`c0000005
Parameter 2 : fffff803`e4ec46c1
Parameter 3 : 00000000`00000000
Parameter 4 : ffffffff`ffffffff
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7b040
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7b040
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\112212-18283-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 9200
Dump File Size : 278,512
==================================================

http://www.eightforums.com/bsod-crashes-debugging/13913-bsod-fresh-win-8-install.html
Relevancy 60.2%

Hi, I reformatted and installed a fresh copy of Win7 Pro x64 on my PC because it was having BSOD issues and then reinstalled my chipset, network, and audio drivers. Not long after installing only those things I experienced another BSOD. I'm not sure what caused it but I'm 100% sure its not my RAM or my processors. Ive run Memtest 86+ multiple times for over 7 passes as well as a stress test on my CPU which ran for 6 hours with no problems. The problem that came up was a 7f. Here is the dump and thank you for your time!

A:BSOD on fresh install

Welcome!

Please enable driver verifier: Driver Verifier - Enable and Disable

After it has caused several crashes, follow these directions: http://www.sevenforums.com/crashes-d...tructions.html

Thanks,
~JK

...Summary of the Dumps:
Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Aug 15 13:29:55.566 2010 (GMT-4)
System Uptime: 0 days 0:08:02.096
BugCheck 7F, {8, 80050031, 6f8, fffff80002ad031d}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
BUGCHECK_STR: 0x7f_8
PROCESS_NAME: drvinst.exe
??????????????????????????????????????????????????????????????????????????????????????

http://www.sevenforums.com/bsod-help-support/104453-bsod-fresh-install.html
Relevancy 60.2%

Hi I hope someone can give me a hint A friend of mine has brought me an Acer Aspire with Vista Ultimate pre charged It didn't 8E with BSOD install: Fresh start in normal mode showing a BSOD with a STOP x E No further information about which driver caused it I was able to run in safe mode just to save documents Fresh install: BSOD with 8E in a pen drive A fresh installation led to nothing again the same error So I pressed Alt-F on boot to roll back the system It activates a first hidden Fresh install: BSOD with 8E partition formats the second one and install the standard condition with original drivers But after a reboot after the first start up message again the same error Now I can't enter in normal mode for the E error and it doesn't allow me to enter in safe mode as the installation looks like incomplete Memtest detected nothing I took away the first hd and installed my XP sp into the second one It loads all the original drivers but the ones of the video card a nVidia GO If I try to install them it crashes in a E error Despite of it it runs in x x M though it moves the windows slowly the rest goes fine From there I was able to catch the mini dump from the partition of Vista I'd appreciate any hint thanks

A:Fresh install: BSOD with 8E

Follow these instructions: http://www.techsupportforum.com/1871981-post2.html

We can't get as much information as we'd like to from that text file. The above link will provide us with information about your system and the minidumps themselves.

The only thing that I can see is that the problem was caused by nvlddmkm.sys, but can't yet see if it is actually the problem of if it was something else.

http://www.techsupportforum.com/forums/f299/fresh-install-bsod-with-8e-419884.html
Relevancy 60.2%

Hello All,
Thank you in advance for your assistance. I've been helping a friend with his machine and he just recently started getting BSoDs. He thinks it may have been caused by a World of Warcraft update, but he's continuing to get BSoDs with a fresh install of Win7 Home Premium x64.

The machine is a home-built machine with all components purchased from Newegg or Amazon (Amazon itself and not any sub-retailers that sell on amazon).

Specs:
Motherboard EVGA P55 LE
Graphics: EVGA GTX465
Processor: Core i7-870
Ram: 8GB of Crucial
OS: Full Retail
Age of system: 6 months
OS Age: fresh install for 30 minutes prior to BSoD

Memtest86 was clean for several hours.
Things that were installed prior to the crash:
- Norton 360
- MS office
- Google Chrome
-Nero
-Razer drivers
-EVGA Drivers

A:BSoD - Fresh install

  
Quote: Originally Posted by realbass1


Hello All,
Thank you in advance for your assistance. I've been helping a friend with his machine and he just recently started getting BSoDs. He thinks it may have been caused by a World of Warcraft update, but he's continuing to get BSoDs with a fresh install of Win7 Home Premium x64.

The machine is a home-built machine with all components purchased from Newegg or Amazon (Amazon itself and not any sub-retailers that sell on amazon).

Specs:
Motherboard EVGA P55 LE
Graphics: EVGA GTX465
Processor: Core i7-870
Ram: 8GB of Crucial
OS: Full Retail
Age of system: 6 months
OS Age: fresh install for 30 minutes prior to BSoD

Memtest86 was clean for several hours.
Things that were installed prior to the crash:
- Norton 360
- MS office
- Google Chrome
-Nero
-Razer drivers
-EVGA Drivers



Well this one points directly to your Norton 360. Remove and replace with Microsoft Security Essentials

Download and run the Norton Removal Tool to uninstall your Norton product | Norton Support

http://www.microsoft.com/security_essentials/


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\042011-38921-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02e09000 PsLoadedModuleList = 0xfffff800`03046e50
Debug session time: Wed Apr 20 16:43:23.029 2011 (GMT-4)
System Uptime: 0 days 0:17:57.091
Loading Kernel Symbols
...............................................................
................................................................
.........................
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff8800313a5b0, 0, 0}

Unable to load image \??\C:\ProgramData\Norton\{0C55C096-0F1D-4F28-AAA2-85EF591126E7}\N360_4.0.0.127\Definitions\IPSDefs\20091105.001\IDSVia64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for IDSVia64.sys
*** ERROR: Module load completed but symbols could not be loaded for IDSVia64.sys
Probably caused by : IDSVia64.sys ( IDSVia64+45187 )

Followup: MachineOwner
---------

6: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8800313a5b0, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:... Read more

http://www.sevenforums.com/bsod-help-support/158300-bsod-fresh-install.html
Relevancy 60.2%

Let me know what you need. Just installed a fresh x64 pro on a new mb. ive been crashing non stop so it seems to be gpu, ram, or cpu. <3 Thanks guys.

A:bsod after fresh install

im having BSOD errors with my new and first build. Have been trouble shooting for days. even with fresh install...everything tested fine but somewhere somehow there is a sofware error. Reinstallation fixes it for awhile but then its back. Do you game, maybe thats part of it, battlefield bad company 2 is the usual cause but not always. maybe someone will help us lets cross out fingers

http://www.sevenforums.com/bsod-help-support/147793-bsod-after-fresh-install.html
Relevancy 60.2%

I have been getting bsods recently at first it was only when trying to play BF i couldnt play for more than min before bsod now its moving its way into normal functions i will include a dx diag and cpu z txt file Here are the reports from the time frame i recieved the bsod Iwill also include the one i got last night before i gave up Let me know if there is anything else I should include Log Name System Source Microsoft-Windows-WER-SystemErrorReporting Date PM Event ID Task Category None Level Error Keywords Classic User N A Computer Dennis-PC Description The computer has rebooted from a bugcheck The bugcheck was x x xfffffa ee x b b x f A dump was saved in C Windows MEMORY DMP Report Id - install BSOD after Even fresh - Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-WER-SystemErrorReporting quot Guid quot ABCE E -DE - - - FA C quot EventSourceName quot BugCheck quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version BSOD Even after fresh install gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Dennis-PC lt Computer gt lt Security gt lt System gt lt EventData gt lt Data Name quot param quot gt x x xfffffa ee x b b x f lt Data gt lt Data Name quot param quot gt C Windows MEMORY DMP lt Data gt lt Data Name quot param quot gt - - lt Data gt lt EventData gt lt Event gt Log Name System Source Microsoft-Windows-Kernel-Power Date PM Event ID Task Category Level Critical Keywords User SYSTEM Computer Dennis-PC Description The system has rebooted without cleanly shutting down first This error could be caused if the system stopped responding crashed or lost power unexpectedly Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-Kernel-Power quot Guid quot C B A- - C -AC E- C D B quot gt lt EventID gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Dennis-PC lt Computer gt lt Security UserID quot S- - - quot gt lt System gt lt EventData gt lt Data Name quot BugcheckCode quot gt lt Data gt lt Data Name quot BugcheckParameter quot gt x lt Data gt lt Data Name quot BugcheckParameter quot gt xfffffa ee lt Data gt lt Data Name quot BugcheckParameter quot gt xb b lt Data gt lt Data Name quot BugcheckParameter quot gt xf lt Data gt lt Data Name quot SleepInProgress quot gt false lt Data gt lt Data Name quot PowerButtonTimestamp quot gt lt Data gt lt EventData gt lt Event gt LAST NIGHT Log Name System Source Microsoft-Windows-WER-SystemErrorReporting Date PM Event ID Task Category None Level Error Keywords Classic User N A Computer Dennis-PC Description The computer has rebooted from a bugcheck The bugcheck was x x xfffffa x b x f A dump was saved in C Windows MEMORY DMP Report Id - - Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-WER-SystemErrorReporting quot Guid quot ABCE E -DE - - - FA C quot EventSourceName quot BugCheck quot gt lt EventID Qualifiers quot quot gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt ... Read more

A:BSOD Even after fresh install

Maybe this will help too

http://www.bleepingcomputer.com/forums/t/446981/bsod-even-after-fresh-install/
Relevancy 60.2%

Hey,english is not my native language,i hope you guys understand.
I had to re-install windows 7 in one pc and after that every programa/game is crashing and BSOD,before that this pc runs perfectly.
I just run "Driver Verifier" and pc freeze in 5 minutes,surely is a driver issue
Already installed gpu and chipset drivers,i dont know what i have to do.

A:BSOD after a fresh install

Just forget the one in the first post.

CPU - AMD ATHLON X3 425
Video Card - R7 250
MotherBoard? ASUS M2N68-AM SE2
Power Supply - SEVENTEAM 550

Already run memtest,no problems.

Thanks.

http://www.techsupportforum.com/forums/f299/bsod-after-a-fresh-install-805545.html
Relevancy 60.2%

Hi I am new here but I have been lurking for a little while I am in the need of some BSOD Install Fresh BSOD help We were having issues with a Dell e with an i GB Ram loaded with Win XP After Id a NIC driver as the issue per a dell rep we eventually decided to move to Windows bit After the install it has been BSOD hell The machine is used for a software developer who works for me here is the most common crash dump ------------------------------------------------------------------------------------- WHEA UNCORRECTABLE ERROR A fatal hardware error has occurred Parameter identifies the type of error source that reported the error Parameter holds the address of the WHEA ERROR RECORD structure that describes the error conditon Arguments Arg Machine Check Exception Arg fffffa Address of the WHEA ERROR RECORD structure Arg b High order -bits of the MCi STATUS value Arg Low order -bits of the MCi STATUS value Debugging Details ------------------ BUGCHECK STR x GenuineIntel CUSTOMER CRASH COUNT DEFAULT BUCKET ID VISTA DRIVER FAULT PROCESS NAME System CURRENT IRQL f BSOD Fresh Install STACK TEXT fffff efa fffff ca b fffffa b nt KeBugCheckEx fffff efa fffff d d d fffffa a ce fffffa a d hal HalBugCheckSystem x e fffff efaa fffff c fffffa a ce fffff efe fffff efe nt WheaReportHwError x fffff efb fffff c fffffa a ce fffff efe fffffa a ce hal HalpMcaReportError x c fffff efc fffff bf d fffff efeb hal HalpMceHandler x e fffff efc fffff ffe fffff e hal HalpMceHandlerWithRendezvous x fffff efcc fffff c ef c hal HalHandleMcheck x fffff efcf fffff c ed nt KxMcheckAbort x c fffff efe fffff ecc nt KiMcheckAbort x fffff c c intelppm x c STACK COMMAND kb FOLLOWUP NAME MachineOwner MODULE NAME hardware IMAGE NAME hardware DEBUG FLR IMAGE TIMESTAMP FAILURE BUCKET ID X x GenuineIntel PROCESSOR CACHE BUCKET ID X x GenuineIntel PROCESSOR CACHE Followup MachineOwner --------- Dell has me re-installing drivers and disabling startup progs I don t think thats the issue I am starting to have similar issues with an identical laptop Other then Office Eset Nod Visual Studio there is nothing else on this machine Ran Mem test dell diagnostics all checked out we also got a BSOD recently during startup I will load that dump shortly

A:BSOD Fresh Install

have you verified that you are running the most recent BIOS updates?

http://www.bleepingcomputer.com/forums/t/389514/bsod-fresh-install/
Relevancy 60.2%

this is my first custom i can access bios menu on start up all seems fine but if i try to install windows 7 it loads files then blue screen right after the windows load thing pops up. im at a loss here please help

http://www.sevenforums.com/bsod-help-support/379366-bsod-during-fresh-install.html
Relevancy 60.2%

Just did a fresh install a couple days ago, and still getting multiple BSOD`s. I have basicly just let the rig sit there with the power on to see if it was stable. It was not....

I have not installed any drivers or anything myself. Just webbrowsers, spotify and fan control software from ASrock

I sure hope someone is able to understand what is going on
DESKTOP-9A0MGS7-07-Oct-16_101952_34.zip

http://www.tenforums.com/bsod-crashes-debugging/66211-bsod-fresh-install.html
Relevancy 60.2%

I was instructed by the PC shop to re-install windows 7 after they were unable to find any hardware problems which were causing my system to BSOD or randomly reboot.

Today I did a fresh install of Windows 7 Pro 64-bit, Office 2010 and install all important security updates. Within hrs of completing the installation my system has BSOD twice, for different reasons each time.

I would like some ammunition before heading back to the PC shop.

Any help in resolving this would be great.

Uploading dump collection for both crashes.

Also uploaded windows debug output.

Thanks

A:BSOD after fresh install

There is a high probability that your CPU is defective, are you overlocking?
Dumps directly blame a hardware fault in your CPU, i would recommend that you replace it
Stop 0x124 - what it means and what to try



   Information
Go to your motherboard's website and check your version of your BIOS. See if there are any problems you are having that are solved by a a later version. I do not often recommend flashing the BIOS because there is a risk involved. If there is problem addressed by a BIOS that applies to your computer, consider flashing your BIOS to the latest version. If you choose to do this, flash you BIOS outside of Windows.

Run Prime 95 again to test your CPU and your ram. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8007eae028, f2000000, 10005}

Unable to load image \SystemRoot\system32\DRIVERS\intelppm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for intelppm.sys
*** ERROR: Module load completed but symbols could not be loaded for intelppm.sys
Probably caused by : hardware
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007eae028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000f2000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000010005, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_GenuineIntel

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: f

STACK_TEXT:
fffff880`031ddb58 fffff800`02a22a3b : 00000000`00000124 00000000`00000000 fffffa80`07eae028 00000000`f2000000 : nt!KeBugCheckEx
fffff880`031ddb60 fffff800`02be67d3 : 00000000`00000001 fffffa80`07eb1a60 00000000`00000000 fffffa80`07eb1ab0 : hal!HalBugCheckSystem+0x1e3
fffff880`031ddba0 fffff800`02a22700 : 00000000`00000728 fffffa80`07eb1a60 fffff880`031ddf30 fffff880`031ddf00 : nt!WheaReportHwError+0x263
fffff880`031ddc00 fffff800`02a22052 : fffffa80`07eb1a60 fffff880`031ddf30 fffffa80`07eb1a60 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`031ddd50 fffff800`02a21f0d : 00000000`00000008 00000000`00000001 fffff880`031ddfb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`031ddd90 fffff800`02a15e88 : 00000000`00000002 fffff880`031d5180 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`031dddc0 fffff800`02ad7f2c : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`031dddf0 fffff800`02ad7d93 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c
fffff880`031ddf30 fffff880`047dec61 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153
fffff880`031fdc98 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : intelppm+0x2c61
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_M... Read more

http://www.sevenforums.com/bsod-help-support/160678-bsod-after-fresh-install.html
Relevancy 60.2%

Just did a fresh install a couple days ago, and still getting multiple BSOD`s. I have basicly just let the rig sit there with the power on to see if it was stable. It was not....

I have not installed any drivers or anything myself. Just webbrowsers, spotify and fan control software from ASrock

I sure hope someone is able to understand what is going on :)

My hardware is a few years old, but have not been acting up like this before.
Memtest passes with no faults. Must be a windows 10 thing

perfmon.zip

SysnativeFileCollectionApp.zip


OS - Windows10 x64


? CPU - I5 2500K
? AMD HD7870
? ASrock Z77 Pro4
Nvidia 7870
16GB Corsair DDR3 RAM
? 1200W Gold standard PSU
2x128GB SSD in Raid0

http://www.techsupportforum.com/forums/f299/bsod-s-on-fresh-install-1161985.html
Relevancy 60.2%

I am installing Windows XP on my machine after the old hard drive crashed Have a brand new hard drive nothing on it I think see below for explanation My system was overheating and I installed a new BSOD install during fresh fan and after the first boot after installing the new fan the computer would reset itself when attempting to start Windows I was only able to get it to run in fail-safe settings in the BIOS This made makes no BSOD during fresh install sense to me as it was running fine before that It runs fine with proper voltage settings from a bootable Knoppix CD I can access the internet use X-windows without a hitch I lived with the voltage issue for a bit before the hard drive died it was years old and had been swapping almost constantly due to low RAM There were no other issues with the computer except it would not boot with proper voltage settings I have a brand new GB PATA WD drive and when I went to install XP Home it got to the point where it says Setup is now starting Windows and then crashed to a BSOD with the error message quot DRIVER IRQL NOT LESS OR EQUAL quot I tried to run the install in fail-safe and again it still had no issue I was able to get to the part where it asks if I want to install repair or quit so I would possibly be able to install if I were to choose to live with that issue Restarted tried proper settings in the BIOS double checked the jumper on the mbd Chaintech CT- NJL and it's correct this time it gave me an error that said quot An attempt was made to write to read only memory STOP x BE quot with the file sbp port sys listed at the bottom Research shows this to be an IEEE controller file yet there is no IEEE port on the mbd Most of the information I found about this error refers to issues with an existing installation of Windows I have not yet done that However there is one oddity the computer no longer boots to 'INVALID SYSTEM DISK' if I don't have a bootable CD in it now just attempts to boot from CD then stops and doesn't do anything at all The hard drive is recognized by the BIOS it does not share the Primary IDE controller with any other hardware I don't know what other information to include here as I am completely and utterly confused by this Any help would be appreciated If any information I have found is erroneous please let me know as well

A:BSOD during fresh install

and welcome to the Forum

I would run diagnostics on the hard drive . .

Diagnostic Utilities Here

See this for how to make a bootable cd

http://www.techsupportforum.com/forums/f10/bsod-during-fresh-install-461490.html
Relevancy 60.2%

Hello I just recently re-installed my Win bit home Premium was getting alot 7 Fresh BSOD install WIN of BSOD thought maybe it was os related After re-installing I have gotten more After a little searching WIN 7 BSOD Fresh install I d l Bluescreen viewer then wound up testing my Ram one stick at a time with memtest in the same slot passed one failed removed it Got another one urgghhhh anyways heres the info from BSOD since I reinstalled Dump File - - dmp Crash Time PM Bug Check String IRQL NOT LESS OR EQUAL Bug Check Code x a Parameter fffff dc Parameter Parameter Parameter fffff ad Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Computer Name Full Path C Windows MiniDump - - dmp Processors Count Major Version Minor Version Dump File - - dmp Crash Time AM Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff ad a Parameter fffff fdc Parameter Caused By Driver ntoskrnl exe Caused By Address ntoskrnl exe File Description NT Kernel amp System Product Name Microsoft Windows Operating System Company Microsoft Corporation File Version win gdr - Processor x Computer Name Full Path C Windows MiniDump - - dmp Processors Count Major Version Minor Version Dump File - - dmp Crash Time PM Bug Check String SYSTEM SERVICE EXCEPTION Bug Check Code x b Parameter c Parameter fffff ebcd Parameter fffff fadc f Parameter Caused By Driver ndis sys Caused By Address ndis sys bcd File Description Product Name Company File Version Processor x Computer Name Full Path C Windows MiniDump - - dmp Processors Count Major Version Minor Version It actually made it all day today before the last one All drivers are newest from respected manufaturers seems to crash more when I am playing Videogames but will do it while watching movies or nothing at all occasionally Thanks fer any help btw I had sets of matched pairs Corsair XMS PC I still have the one matched pair in one channel and the single stick in another Hardware Asus Crosshair II Formula ATI RADEON HD AMD PHENOM B E Fatality XFI soundblaster W D Raptor Sata gig hd DVD rom Burner Samsung Also have a Cmedia headset Icemats Win H P bit reinstalled and updated I used Bluescreen Viewer to export the attached txt file from the dmp files in Minidump folder

A:WIN 7 BSOD Fresh install

  
Quote: Originally Posted by Rzeman


Hello, I just recently re-installed my Win7 64bit home Premium...was getting alot of BSOD thought maybe it was os related...After re-installing I have gotten 3 more. After a little searching I d/l Bluescreen viewer, then wound up testing my Ram one stick at a time,with memtest86, in the same slot. 3 passed one failed removed it. Got another one urgghhhh. anyways heres the info from 3 BSOD since I reinstalled.........

==================================================
Dump File : 112110-16926-01.dmp
Crash Time : 11/21/2010 8:14:48 PM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : fffff800`42672dc8
Parameter 2 : 00000000`00000002
Parameter 3 : 00000000`00000001
Parameter 4 : fffff800`02ad8149
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+70740
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16617 (win7_gdr.100618-1621)
Processor : x64
Computer Name :
Full Path : C:\Windows\MiniDump\112110-16926-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7600
==================================================
==================================================
Dump File : 112110-19921-01.dmp
Crash Time : 11/21/2010 12:29:26 AM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code : 0x0000003b
Parameter 1 : 00000000`c0000005
Parameter 2 : fffff800`02ad598a
Parameter 3 : fffff880`0fdc4250
Parameter 4 : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+70740
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16617 (win7_gdr.100618-1621)
Processor : x64
Computer Name :
Full Path : C:\Windows\MiniDump\112110-19921-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7600
==================================================
==================================================
Dump File : 112010-22386-01.dmp
Crash Time : 11/20/2010 7:37:16 PM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code : 0x0000003b
Parameter 1 : 00000000`c0000005
Parameter 2 : fffff880`0154ebcd
Parameter 3 : fffff880`0fadc4f0
Parameter 4 : 00000000`00000000
Caused By Driver : ndis.sys
Caused By Address : ndis.sys+87bcd
File Description :
Product Name :
Company :
File Version :
Processor : x64
Computer Name :
Full Path : C:\Windows\MiniDump\112010-22386-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7600
==================================================
It actually made it all day today before the last one. All drivers are newest from respected manufaturers... seems to crash more when I am playing Videogames but will do it while watching movies or nothing at all occasionally. Thanks fer any help... btw I had 2 sets of matched pairs Corsair XMS2 PC6400, I still have the one matched pair in one channel and the single stick in another.

Hardware:
Asus Crosshair II Formula
ATI RADEON HD5830
AMD PHENOM 965 B.E.
Fatality XFI soundblaster
W.D. Raptor Sata 2 150 gig hd
DVD rom/Burner Samsung
Also have a Cmedia headset Icemats.......
Win 7 H.P. 64bit [reinstalled and updated.]
I used Bluescreen Viewer to export the attached txt file from the .dmp files in Minidump folder.


While Blue Screen view does a decent enough job we can do better if we have the DMP files.

If you wish to have others assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. The procedure:

* Copy the contents of \Windows\Minidump to another (tempo... Read more

http://www.sevenforums.com/bsod-help-support/126279-win-7-bsod-fresh-install.html
Relevancy 60.2%

Windows 7 64 home premium
cpu: Phenom II x4 960t
mobo: Asus M4A87TD EVO
ram: Corsair cmx8gx3m4a1333c9 xms3 4x2gb
psu: Corsair vx 550w
gpu: Asus Radeon 6950

Just installed new cpu and ram as computer has been causing a few hardware related issues did a fresh install still getting random BSOD.

A:BSOD after fresh install

memtest 86+ and windows memory diagnosis found no errors.

http://www.sevenforums.com/bsod-help-support/211323-bsod-after-fresh-install.html
Relevancy 60.2%

So I recently did a recovery install just to clean the system and I have been getting multiple crashes randomly throughout the day.

Any suggestions?

BSOD Problem Below:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF80002A42EB8
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\032211-24975-01.dmp
C:\Users\Mike\AppData\Local\Temp\WER-38984-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD's Fresh OS Install

  
Quote: Originally Posted by SevenOS


So I recently did a recovery install just to clean the system and I have been getting multiple crashes randomly throughout the day.

Any suggestions?

BSOD Problem Below:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF80002A42EB8
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\032211-24975-01.dmp
C:\Users\Mike\AppData\Local\Temp\WER-38984-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt




To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/152207-bsods-fresh-os-install.html
Relevancy 60.2%

Hi guys and gals,

I've been breaking my head above this issue for quite a few days now and spent some hours behind our favourite search engine to no avail.

Basically I've bought a Tyan Thunder K7X Pro Dual Athlon MP mobo with 2x CPU and 3GB RAM off Ebay and spent the pas few days trying to install XP on this piece of $%$%^.

Fresh installs of XP BSOD with the codes 0x0000007B 0xF78DA524 0xC0000034.

I have tried several known working IDE harddisks and quite a few SCSI ones too, powered by an Adaptec 2940 adapter. All of them BSOD the same way. All Google references point to SATA problems... I have none, only the onboard IDE adapters.

My IDE disks are primary master and my IDE DVD-ROM is secondary master. I have no PCI/AGP cards in my system.

Any suggestions will be appreciated.
 

https://forums.techguy.org/threads/fresh-install-of-xp-bsod-ing.1072546/
Relevancy 60.2%

Hi,

I had the same problem that others have had with the new nVidia driver causing a BSOD but mine seem to be a little worse off. After uninstalling the nVidia driver the defult windows drivers caused my computer to just black screen after boot. I would see the windows 7 load screen but never the login screen (just black w/ no mouse). So I decided to fresh install by formatting and installing.

After fresh install the same problem happens upon first true boot I see the black screen only. After about 10-30 seconds the BSOD will appear saying it is there due to video card driver timeout. I dont know what i should try next since I am on my 3rd fresh install with the same problem.

I installed XP again and all is fine with the most up to date video driver as well.


Any ideas?

A:BSOD after fresh install

Another update, I was wrong in saying that windows 7 ever fully installed, it will go to a black screen now before instalation is complete...

http://www.sevenforums.com/installation-setup/90573-bsod-after-fresh-install.html
Relevancy 60.2%

ok so i fresh installed my computer brand new now i have a stock CPU fan and i think my CPU is overheating or something to do with heat or my CPU now the BSOD said it was a Thread or somthing it sounds to me a CPU thread so can you help me out thanks

A:BSOD after fresh Install why?

  
Quote: Originally Posted by Sam00


ok so i fresh installed my computer brand new now i have a stock CPU fan and i think my CPU is overheating or something to do with heat or my CPU now the BSOD said it was a Thread or somthing it sounds to me a CPU thread so can you help me out thanks


Ok

Where to start


1-SPTD.SYS. used in alcohol/daemon tools is hideous for BSOD's

ASACPI.sys Sun Mar 27 22:30:36 2005





Quote:
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).


2-Your VB compiler.

This is what caused this crash.

3-AV and firewall. We recommend Microsoft Security Essentials and win 7

4-Memory

Just to be sure I would run memtestDownload a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.
Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot. Test the sticks individually, and if you find a good one, test it in all slots.

Ken

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\111210-12027-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c18000 PsLoadedModuleList = 0xfffff800`02e55e50
Debug session time: Fri Nov 12 00:55:57.382 2010 (GMT-5)
System Uptime: 0 days 5:57:50.802
Loading Kernel Symbols
...............................................................
................................................................
.................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa8007fb9b30, fffffa8007fb9e10, fffff80002f935d0}

Probably caused by : vbc.exe

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8007fb9b30, Terminating object
Arg3: fffffa8007fb9e10, Process image file name
Arg4: fffff80002f935d0, Explanatory message (ascii)

Debugging Details:
------------------
PRO... Read more

http://www.sevenforums.com/bsod-help-support/124254-bsod-after-fresh-install-why.html
Relevancy 60.2%

Hello all. I was experiencing random BSOD occurrences so I decided to do a fresh install of Windows 7 Pro in hopes of alleviating this wicked disease. Plus, I wanted to put in a new SSD so thought now is the time. Well after returning home this morning from work I fired up the PC and was greeted with the "Windows has unexpectedly shut down blah blah blah" prompt. Well, I'm here seeking assistance.

As I mentioned, this is a fresh install. I've only installed the OS, Adobe Acrobat, Google Chrome, ESET SMart Security, Office 365, and software for my HP printer. Oh, and of course all the Windows updates. I'm hoping to get this resolved before installing any of my other applications. I look forward to any assistance I can get!

http://www.sevenforums.com/bsod-help-support/388996-bsod-after-fresh-install.html
Relevancy 60.2%

My friend has an HP Media Center PC. It had Vista x86 installed when he bought it about 2-3 years ago. It ran fine for a long time but recently began getting the BSOD randomly. He thought it may have been too many antivirus programs along with poor maintenance of it. So he bought Windows7, but doesn't know enough about computers to do it himself so he had me do it. I installed Win7 x86 and installed TrendMicro antivirus, which he also has on his laptop, so he wanted that on his desktop as well. I also installed Office 2003 and a few other progs (firefox, adobe reader, flash.. basic stuff). It still randomly goes to BSOD. I followed your instructions, and am posting the zip file you request.

A:BSOD on fresh install

The volume dirty flag is set on the hard disk.
Try this:

Quote:




CHKDSK /R /F:
Run CHKDSK /R /F from an elevated (Run as adminstrator) Command Prompt. Please do this for each hard drive on your system.
When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter. Then reboot and let the test run. It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors. See "CHKDSK LogFile" below in order to check the results of the test.

Elevated Command Prompt:
Go to Start and type in "cmd.exe" (without the quotes)
At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"

CHKDSK LogFile:
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
Expand the Windows logs heading, then select the Application log file entry.
Double click on the Source column header.
Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).
Copy/paste the results into your next post.




Then run another copy of the perfmon report to see if it's still mentioned there.
If so, then try this:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
http://www.carrona.org/memdiag.html (read the details at the link)
http://www.carrona.org/hddiag.html (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: http://www.carrona.org/malware.html (read the details at the link)




There are a couple of Windows Updates missing from your system, please visit Windows Update and get all the updates available for your system.

Please update your modem drivers and your network drivers (the wired one's built into your system's nVidia nForce chipset) as they are dated from 2008

9 memory dumps
6 different BSOD error codes, blaming at least 4 different causes
This is most likely a hardware problem (so running the diagnostics above is essential).

One of the memory dump files blames Vsapint.sys - a driver file from company Trend Micro Inc. Please do the following:

Quote:




Anti-Virus Removal:
Please do the following:
- download a free antivirus for testing purposes: http://www.carrona.org/freeav.html
- uninstall the Trend Micro from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of Trend Micro using this free tool: http://esupport.trendmicro.com/1/How...n-my-comp.aspx
- IMMEDIATELY install and update the free antivirus
- check to see if this fixes the BSOD's




BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Wed Nov 17 11:03:44.217 2010 (UTC - 5:00)
System Uptime: 0 days 0:18:48.090
*** WARNING: Unable to verify timestamp for tmxpflt.sys
*** ERROR: Module load completed but symbols could not be loaded for tmxpflt.sys
*** WARNING: Unable to verify timestamp for vsapint.sys
*** ERROR: Module load completed but symbols could not be loaded for vsapint.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
Bugcheck code 00000050
Arguments cccccc06 00000001 8ff79c07 00000002
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Tue Nov 16 20:26:59.503 2010 (UTC - 5:00)
System Uptime: 0 days 0:44:51.376
*** WARNING: Unable to verify timestamp for vsapint.sys
*** ERROR: Module load completed but symbols could not be loaded for vsapint.sys
*** WARNING: Unable to verify timestamp for tmxpflt.sys
*** ERROR: Module load completed but symbols could not be loaded for tmxpflt.sys
BUGCHECK_STR: 0x1a_41287
DEFAULT_B... Read more

http://www.techsupportforum.com/forums/f299/bsod-on-fresh-install-530083.html
Relevancy 60.2%

I just did a fresh install of Windows 7 Professional 32bit. Everything seems to be going fine, but shortly after I log in (anywhere from 15 seconds, to a couple of minutes), it BSOD's.

I can boot into safe mode fine without this happening.

The only odd thing I've noticed, is if I open up Internet Explorer, that causes a BSOD almost immediately.

Attached my log, thanks!

A:BSOD after fresh install

  
Quote: Originally Posted by marble1980


I just did a fresh install of Windows 7 Professional 32bit. Everything seems to be going fine, but shortly after I log in (anywhere from 15 seconds, to a couple of minutes), it BSOD's.

I can boot into safe mode fine without this happening.

The only odd thing I've noticed, is if I open up Internet Explorer, that causes a BSOD almost immediately.

Attached my log, thanks!



This crash was caused by hardware. Please go here to find out what it means and what to try. Stop 0x124 - what it means and what to try
Ken

DMP

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\101010-15958-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols;*http://msdl.microsoft.com/download/symbols/;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0x82817000 PsLoadedModuleList = 0x8295f810
Debug session time: Sun Oct 10 13:19:51.339 2010 (GMT-4)
System Uptime: 0 days 0:04:18.399
Loading Kernel Symbols
...............................................................
................................................................
..............
Loading User Symbols
Loading unloaded module list
....
3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 00000000, Machine Check Exception
Arg2: 85cdf01c, Address of the WHEA_ERROR_RECORD structure.
Arg3: b66cc000, High order 32-bits of the MCi_STATUS value.
Arg4: dc000135, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_AuthenticAMD

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: SearchIndexer.

CURRENT_IRQL: 1f

STACK_TEXT:
8c53e8cc 82c35f3f 00000124 00000000 85cdf01c nt!KeBugCheckEx+0x1e
8c53e908 828e5f04 85cbd051 85cdf01c 8287f4f0 hal!HalBugCheckSystem+0xab
8c53e938 82c361f1 85d57ca0 82c43e40 00000000 nt!WheaReportHwError+0x230
8c53ea4c 82c362e3 85d57ca0 85d57cf0 00000000 hal!HalpMcaReportError+0x3b
8c53ea70 82c3654f 00000000 85d57cf0 8c53eb90 hal!HalpMceHandler+0x8b
8c53ea80 82c2c5f5 00000000 00000000 00000000 hal!HalpHandleMachineCheck+0x3b
8c53eb90 82c29261 00000000 8c539750 00000000 hal!HalpMcaExceptionHandler+0x87
8c53eb90 00000000 00000000 8c539750 00000000 hal!HalpMcaExceptionHandlerWrapper+0x89
STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: 0x124_AuthenticAMD_PROCESSOR_CACHE

BUCKET_ID: 0x124_AuthenticAMD_PROCESSOR_CACHE

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/117048-bsod-after-fresh-install.html
Relevancy 60.2%

My PC has been down for a while now and I've gotten the chance to fix it again. It broke when the hard drive became corrupted and kept on giving BSODs (don't remember the error code for those times). I got a new hard drive and installed it fine but I get BSODs about halfway through an install of windows 7 or 8 (I've tried both incase it was a disc problem) The error I get is a ntfs.sys one and the rest of the error screen is attached,

A:BSOD on Fresh Install

This is a BSOD related to the file system (NTFS) on the hard drive.
I'd suggest running these free, bootable hardware diagnostics:  http://www.carrona.org/initdiag.html
Please start with the hard drive diagnostics.

http://www.bleepingcomputer.com/forums/t/615194/bsod-on-fresh-install/
Relevancy 60.2%

Thanks in advance for any help I had a nasty virus a month ago can't recall the exact name but something along the lines of Security After cleaning it up with malwarebytes I started getting random interval bsods with different drivers being blamed each time I clean installed xp and even before installing any drivers for video card etc I got a bsod blaming tcpip sys Ran a fresh even after install. Bsod repair and the machine ran for hours while I was at work with nothing installed Once home and starting to Bsod even after fresh install. install drivers for sound video etc the bsods showed up again randomly Some blaming the soundmax drivers some sisnic sys and so on The kicker is that the machine runs absolutely perfect in safe mode Things I have tried clean install times repair from xp cd fix mbr new pagefile sfc scannow swapped out ALL memory cleaned out case wasn't dirty anyways unplugged various hardware still crashed Probably a thousand other things that are slipping my mind at the moment If you need any additional info let me know It's an older build but worked just fine for my needs till all this happened I'm on a budget lately so was hoping to fix this without buying new crap mobo asus p s d-x vcard ati radeon x pro memory gskill gb x power rosewill rp v hd maxtor L R

A:Bsod even after fresh install.

Seems like you did everything else try and run diagnostics on the HDD Download the ISO image for SEAtools for DOS and burn the image with IMGBurn in my signature and boot off of the newly created CD and run the Quick and the Advanced tests on the drive. You can also download the ISO Image for Memtest in my signature and burn the image to CD using IMGBurn and boot off of the that CD with one stick of RAM in at a time and run the test on each stick of RAM separately. If all comes up clean then you can also try using a different PSU.

http://www.techsupportforum.com/forums/f10/bsod-even-after-fresh-install-627309.html
Relevancy 60.2%

hi,,,i have problem with my laptop toshiba satellite L510 Model PSQL8L-00L800

first i just got BSOD cause overheat so i clean it up and everything else after that i try fresh install windows 7 32 bit i got randomly BSOD.


like when i open drive D or just install aplication
here my dump
https://docs.google.com/file/d/0B2wB...it?usp=sharing

A:BSOD after fresh install

Please provide all the files following this tutorial so we can provide a complete analysis: Blue Screen of Death Posting Instructions

http://www.sevenforums.com/bsod-help-support/305978-bsod-after-fresh-install.html
Relevancy 60.2%

hi,

I installed win 8.1 pro and i got kernel_security_check_faulire eror. Now every time after i do any operation my computer restarts. I was getting those bsod problems in win 7 ultimate too but wanted to put 8.1 before i resolve problem.

thx for help in advance

A:BSOD-fresh install win 8.1 pro....

If you had BSOD problems in Win7 and now you have them in 8.1, a hardware problem is likely.
Please start with these free diagnostics: Hardware Diagnostics

Additionally, this system is old enough that it may not be capable of running Win8.1. You may be better off going back to Win7 and troubleshooting from there (post over at Windows 7 Help Forums )

Your BIOS dates from 2009. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard. If possible, use the "inside Windows" flash mechanism (if your OEM provides one).

Only 7 Windows Updates installed. Most systems have 60 to 90 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available.

The lone dump file is corrupted. Please do this:





Upload Dump Files:
NOTE: If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service. Then post the link to it in your topic so that we can download it.

Also, search your entire hard drive for files ending in .dmp, .mdmp, and .hdmp. Zip up any that you find and upload them with your next post.

Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDumpMore info on dump file options here: Overview of memory dump file options for Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2

http://www.eightforums.com/bsod-crashes-debugging/52175-bsod-fresh-install-win-8-1-pro.html
Relevancy 60.2%

hi all, i was getting a random bsod prior to a clean install and it is still here.
steps
ran memtest on each stick of rm for 4 passes with no errors.
updated all drivers
latest bios installed

attached are the files listed on the bsod posting instructions these are prior to driver verifier running.

i will update with the driver verified dump files after the next bsod.

A:bsod after fresh install

One crash blames video driver. Other than that I don't see anything that sticks up. All your drivers appear up to date.

I will wait to see if verifier catches anything.

In the meantime, please re-run memtest. This time let it run on all sticks for 7-8 passes
Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+ - Windows 7 Forums

Also run Prime95
Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html

Do this after running verifier; not while it is running.

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Sat Jan 21 14:34:09.789 2012 (UTC - 5:00)
System Uptime: 0 days 2:23:34.257
Probably caused by : ntkrpamp.exe ( nt!SepCreateImpersonationTokenDacl+20 )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x8E
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: 0x8E_nt!SepCreateImpersonationTokenDacl+20
BiosReleaseDate = 12/04/2009
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Fri Jan 20 14:43:59.824 2012 (UTC - 5:00)
System Uptime: 0 days 0:11:06.666
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+e43ad )
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x8E
PROCESS_NAME: wlmail.exe
FAILURE_BUCKET_ID: 0x8E_nvlddmkm+e43ad
BiosReleaseDate = 12/04/2009
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17713.x86fre.win7sp1_gdr.111025-1505
Debug session time: Wed Jan 18 19:10:49.546 2012 (UTC - 5:00)
System Uptime: 0 days 9:30:37.387
Probably caused by : ntkrpamp.exe ( nt!KiSystemFatalException+f )
BUGCHECK_STR: 0x7f_d
PROCESS_NAME: cfp.exe
FAILURE_BUCKET_ID: 0x7f_d_nt!KiSystemFatalException+f
BiosReleaseDate = 12/04/2009
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
??????????????????????????????????????????????????????????????????????????????????????``

http://www.techsupportforum.com/forums/f299/bsod-after-fresh-install-625867.html
Relevancy 60.2%

Hi,

I have a Lenovo Windows 7 64bit Computer where I'm getting a BSOD. I've attached the file if someone can help me determine what is causing the crash. I uninstalled and reinstalled the software but I'm wondering if it has something to do with QuickBooks - I see there are error messages in the event log about menu itmes missing.

Ed

A:BSOD - Fresh install

Hello and welcome eclarke if you can boot into safe mode and run these


http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html

http://www.sevenforums.com/bsod-help-support/306445-bsod-fresh-install.html
Relevancy 59.77%

Hey guys,
I built my PC from all new parts about 3-4 months ago, but from the get go it would intermittently blue screen, it settled down a month or two later but not sure why. Two days ago I wiped and formatted my drive and did a clean install of 7 as I was having unrelated issues I couldn't resolve. But now the blue screens are back. I thought it might be mobo driver issues but I finished updating the drivers and it's still happening.
System specs:
Windows 7 Professional 64x
Gigabyte ga-870fxa-ud5
AMD Phenom x6
AMD Radeon HD6870 1gb
two 4g G-Skill Ripjaw f3-12800cl9d-8gbxl RAM

Attached is the minidump and health report.
Thanks for any help!

A:BSOD on fresh install Windows 7

> Your crash was related to AODDriver2.sys AMD OverDrive Service Driver from Advanced Micro Devices.
Remove > at least to test.

> Please run the update readiness tool and then update to SP-1

Ensure you install the correct 64 or 32 bit option for your system)
Download the System Update Readiness Tool (64bit)
Download the System Update Readiness Tool (32bit)

Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

> I suggest you download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.

Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

http://www.sevenforums.com/bsod-help-support/214809-bsod-fresh-install-windows-7-a.html
Relevancy 59.77%

I keep getting the xA BSOD BSOD of install on Win7 x64 fresh on my BSOD on fresh install of Win7 x64 new reinstall of Windows Home Premium x had to reinstall due to motherboard failure - tested all components on another system and they were fine Installed WIndows motherboard GPU and wireless drivers and it was fine Today amongst things such as iTunes Skype zip and Steam I ve installed some drivers for my USR skype phone and Soluto As soon as the Soluto installer started downloading files the first BSOD hit xA BlueScreenView cannot determine the cause Rebooted tried to replicate the issue and Soluto installed perfectly About minutes later I was on Chrome and the second BSOD happened I had problems with the latest version of the wireless card drivers before on my old install BSODs when opening San Andreas Multi-Player so I decided to roll back to the ones I had on CD This worked for longer minutes or so and I was watching a video and the third blue screen occurred slightly different to the first I m about to uninstall the Skype phone and Soluto to see if that fixes it Dumps are attached for all if anyone could point me in the right direction it would be appreciated I am in a rush to fix this as I need my PC for my studies I did check the Event Viewer and there was a xc error with svchost exe about a second before all records stopped on the third BSOD but couldn t find anything on the internet Specs Phenom II X BE at stock Asus M A R GB RAM a GB G Skill MHz stick and x GB Corsair ValueRAM MHz sticks - am running memtest as I type this just to be sure as these were added last night MSI HD GB HAWK GB Samsung SpinPoint F GB Seagate Pipeline HD Samsung SH AB DVD-RW Asus PCI-G wireless card iAPP CR-i card reader LCDMODKIT U FW-A front panel LCD drivers not installed yet nbsp

A:BSOD on fresh install of Win7 x64

Disregard this I think - 59000 faults on one of the Corsair modules in Memtest
 

http://www.techspot.com/community/topics/bsod-on-fresh-install-of-win7-x64.185815/
Relevancy 59.77%

Hi i'm french i will try my best to explain Sorry but i can't title more precisely due to the circumstance Actually I just reinstalled windows ultimate x hours ago format by the disc too and i had my first quot new quot bluescreen like mn after installed amd driver last one from happened just when i logged into steam Windows wasn't already setup to maintain the bsod screen at this point now its done Before maybe the new windows solve some but just in case it can maybe also help I reinstalled it cause i had random bluescreen with some sys or dll atikvmag which tend to be with the install windows new 7 again BSOD after fresh graphic card system corrupt some cleaner stuff said me i had a bitcoin stuff which can destroy some vital windows fonctions Sometimes i had bsod in the evening like no one doing the quot same thing quot youtube amp games for most not so much differents games i don't even remember having it while idle desktop or if i was idle there was something running youtube player for example Other quick example i used to crashed while having a lot of tabs with BSOD again after fresh new install windows 7 some youtube players yep i BSOD again after fresh new install windows 7 use a lot so BSOD again after fresh new install windows 7 after reboot chrome says me quot restore them quot i say quot do it baby quot which could result in a bsod I also can be freeze well i guess cause my usb stops no mouse keyboard i haven't check sound Or an application crashed i hit ctrl alt sup and all the time in this case it freeze the computer when i click on quot Task manager quot i can't access right clic in bottom in this situtation the explorer doesn't response to my actions I will post further bsod when they will come So here is my probably first zipfile

A:BSOD again after fresh new install windows 7

New one, i was starting a youtube video so my "Before" problems are still there

I missed i vital thing on my first zipfile, my windows 7 wasn't in sp1, trully sorry for that supid miss.. i though it was already done humm.

http://www.sevenforums.com/bsod-help-support/347653-bsod-again-after-fresh-new-install-windows-7-a.html
Relevancy 59.77%

I have had this computer about a month now and recently It blue screens sometimes when gaming sometimes doing nothing Problem signature Problem Event Name BlueScreen OS Version Locale ID Here is the message it gave me Extra information about the problem BCCode f BCP BCP FFFFFA F B BCP FFFFFA F E BCP FFFFF OS Version Service Pack Product Bucket ID X Before after BSOD fresh windows install and xF IOERR c e IMAGE hardware disk Server information c d - ac- b -b - efc a fe I don't know what is causing it Here is my system info CPU Manufacturer GenuineIntel Description Intel Family Model Stepping Name Intel R Core TM i - CPU GHz Speed Installed RAM MB PC Info PC or motherboard model To Be Filled By O E M System BSOD Before and after fresh windows install name RALGONDO-PC System Manufacturer To Be Filled By O E M Onboard devices Graphics Description AMD Radeon HD Name AMD Radeon HD RAM MB Driver Date - Driver Version CD DVD drives Description CD-ROM Drive Caption ATAPI iHAS C ATA Device Manufacturer Standard CD-ROM drives I recently changed my computer to create a dmp file upon it's next blue screen that I am anticipating It crashed again today Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP FFFFFA DD E BCP FFFFFA DD CC BCP FFFFF OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Ralgondo AppData Local Temp WER- - sysdata xml Happened again for the love of god im desperate I TRIED REINSTALLING WINDOWS WITH THE DISK I WAS GIVEN Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP FFFFFA A D BCP FFFFFA A D BCP FFFFF B OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Ralgondo AppData Local Temp WER- - sysdata xml

A:BSOD Before and after fresh windows install

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

http://www.sevenforums.com/bsod-help-support/229312-bsod-before-after-fresh-windows-install.html
Relevancy 59.77%

Hi guys,

After some help troubleshooting this error if possible please. I did a brand new fresh install of windows on a system and have received the first BSOD after a few minutes of running the game "Archeage"

Dump file attached. Any clues would be greatly appreciated thanks.

A:BSOD ON fresh windows install

Hi Borgio.






Quote:
BugCheck 124, {0, fffffa80054b18f8, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80054b18f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Dumping WHEA_ERROR_RECORD structure shows:
2: kd> !errrec fffffa80054b18f8
===============================================================================
Common Platform Error Record @ fffffa80054b18f8
-------------------------------------------------------------------------------
Record Id : 01cfde4cef27c727
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 10/2/2014 14:27:16 (UTC)
Flags : 0x00000002 PreviousError

===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa80054b1978
Section @ fffffa80054b1a50
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : BUS error
Operation : Generic
Flags : 0x00
Level : 3
CPU Version : 0x0000000000600f12
Processor ID : 0x0000000000000000

===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ fffffa80054b19c0
Section @ fffffa80054b1b10
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal

Local APIC Id : 0x0000000000000000
CPU Id : 12 0f 60 00 00 08 06 00 - 0b 22 98 16 ff fb 8b 17
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0 @ fffffa80054b1b10

===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa80054b1a08
Section @ fffffa80054b1b90
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal

Error : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 0)
Status : 0xb880000000020f0f


Error : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 0) - is detailed description of error. The 'Bank 0' wording implies memory hardware.

http://www.sevenforums.com/bsod-help-support/347502-bsod-fresh-windows-install.html
Relevancy 59.77%

Hi guys,
I decided to reinstall Windows 7 due to random BSODs since I experienced random BSODs, usually once a day. I was full of hope, but unfortunately BSODs happened again twice. Also some apps have random crashes. Chrome, Photoshop and Lightroom are opened all the time and BSODs appears randomly when working in these apps (even if I don't use PC). It's very important to fix it, because sometimes I lose arduous work in Photoshop Thanks in advance for any help

http://www.sevenforums.com/bsod-help-support/383340-random-bsod-even-after-fresh-install.html
Relevancy 59.77%

Recently purchased a new computer install on first fresh restart BSOD after and it was working fine until my first restart After this it wouldn't start up at all and kept restarting automatically I ran a fresh BSOD on fresh install after first restart install of Vista but the problem persisted Today the motherbaord was replaced but the problem persists still I came across this site by searching the BSOD error in google and have followed some steps in another thread which has a problem similar to mine Deckard's System Scanner v Run by Bain on - - Computer is in Safe Mode with Networking -------------------------------------------------------------------------------- -- Last Restore Point s -- - - UTC - RP - Installed Windows Sidebar Styler - - UTC - RP - Installed Logitech GamePanel Software - - UTC - RP - Windows Update - - UTC - RP - BSOD on fresh install after first restart Installed Windows Live - - UTC - RP - Installed Windows Live installer -- BSOD on fresh install after first restart First Restore Point -- - - UTC - RP - Installed Dell Resource CD Backed up registry hives Performed disk cleanup -- HijackThis run as Bain exe ------------------------------------------------ Logfile of Trend Micro HijackThis v Scan saved at on Platform Windows Vista SP WinNT MSIE Internet Explorer v Boot mode Safe mode with network support Running processes C Windows Explorer EXE C Windows helppane exe C Program Files Mozilla Firefox firefox exe C Users Bain Downloads dss exe C PROGRA TRENDM HIJACK Bain exe R - HKCU Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKCU Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Page URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Default Search URL http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Search Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Main Start Page http go microsoft com fwlink LinkId R - HKLM Software Microsoft Internet Explorer Search SearchAssistant R - HKLM Software Microsoft Internet Explorer Search CustomizeSearch R - HKCU Software Microsoft Windows CurrentVersion Internet Settings ProxyOverride local R - HKCU Software Microsoft Internet Explorer Toolbar LinksFolderName O - Hosts localhost O - BHO Adobe PDF Reader Link Helper - E F-C D - D -B D- B D BE B - C Program Files Common Files Adobe Acrobat ActiveX AcroIEHelper dll O - BHO no name - E D - A- EC-A -BA D E E - no file O - BHO Windows Live Sign-in Helper - D - C - ABF- ECC- C - C Program Files Common Files Microsoft Shared Windows Live WindowsLiveLogin dll O - HKLM Run Windows Defender ProgramFiles Windows Defender MSASCui exe -hide O - HKLM Run RoxWatchTray quot C Program Files Common Files Roxio Shared SharedCOM RoxWatchTray exe quot O - HKLM Run Adobe Photo Downloader quot C Program Files Adobe Photoshop Elements apdproxy exe quot O - HKLM Run VolPanel quot C Program Files Creative Sound Blaster X-Fi Volume Panel VolPanlu exe quot r O - HKLM Run CTxfiHlp CTXFIHLP EXE O - HKLM Run UpdReg C Windows UpdReg EXE O - HKLM Run StartCCC quot C Program Files ATI Technologies ATI ACE Core-Static CLIStart exe quot O - HKLM Run QuickTime Task quot C Program Files QuickTime QTTask exe quot -atboottime O - HKLM Run iTunesHelper quot C Program Files iTunes iTunesHelper exe quot O - HKLM Run Launch LCDMon quot C Program Files Logitech GamePanel Software LCD Manager LCDMon exe quot O - HKLM Run Launch LGDCore quot C Program Files Logitech GamePanel Software G-series Software LGDCore exe quot SHOWHIDE O - HKLM Run Google Desktop Search quot C Program Files Google Google Desktop Search GoogleDesktop exe quot startup O - HKCU Run MsnMsgr quot C Program Files Windows Live Messenger MsnMsgr Exe quot background O - HKUS S- - - Run Sidebar ProgramFiles Windows Sidebar Sidebar exe detec... Read more

http://www.techsupportforum.com/forums/f284/bsod-on-fresh-install-after-first-restart-264685.html
Relevancy 59.77%

Just reinstalled windows on my desktop and started to receive random bsod Oh and Yes I know windows is out I downgraded due to BSOD issues on that version also Yes I also know my windows is out dated I understand I should update but that's the least of my concerns right now I already had ram card fail on me a couple months back But I didn't recognize this blue screen error EDIT I was reading this guys post BSOD Critical Process Died even after complete reinstall and his issue is exactly like I install fresh Random BSOD on am having My computer would just completely freeze while playing games or watching videos online EDIT Again I Just tried to run Memtest and something strange happened So here's what I did First I download the Memtest USB Installer Turned off my computer and put my other rams cards back Random BSOD on fresh install in I was testing one at a time Started up my computer HP and press ESC to go into the boot menu and the computer just froze on that screen It wouldn't do anything So I turned the computer off and tried another option F I think it was The computer froze again I repeated this process for all boot options on my PC and each time the computer froze on the startup screen Any idea why this would happen

A:Random BSOD on fresh install

Hello Russel, and welcome to Eight Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by afterwards to further help.

http://www.eightforums.com/bsod-crashes-debugging/42392-random-bsod-fresh-install.html
Relevancy 59.77%

I really need help here install, after fresh ntoskrnl.exe BSOD guys im out of ideas About a week ago my computer started getting BSOD randomly while gaming or browsing the web I thought it BSOD after fresh install, ntoskrnl.exe was a failing HDD so I re installed windows onto a new one after running stress tests on it to make sure it was good I have run stress tests on everything and watched temperatures Windows is up to date Swapped new ram sticks to make sure memory was OK Everything seems to check out but i still get these errors This is what is in the dump file If anyone has any ideas i would greatly appreciate it Mini Kernel Dump File Only registers and stack trace are available Symbol search path is Invalid Symbol loading may be unreliable without a symbol search path Use symfix to have the debugger choose a symbol path After setting your symbol path use reload to refresh symbol locations Executable search path is Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Windows Kernel Version MP procs Free x Product WinNt suite TerminalServer SingleUserTS Built by amd fre win rtm - Machine Name Kernel base xfffff c PsLoadedModuleList xfffff e e Debug session time Thu Oct UTC - System Uptime days Symbols can not be loaded because symbol path is not initialized The Symbol Path can be set by using the NT SYMBOL PATH environment variable using the -y lt symbol path gt argument when starting the debugger using sympath and sympath Unable to load image SystemRoot system ntoskrnl exe Win error n WARNING Unable to verify timestamp for ntoskrnl exe ERROR Module load completed but symbols could not be loaded for ntoskrnl exe Loading Kernel Symbols Loading User Symbols Loading unloaded module list WARNING Unable to verify timestamp for hal dll ERROR Module load completed but symbols could not be loaded for hal dll

A:BSOD after fresh install, ntoskrnl.exe

  
Quote: Originally Posted by Marcin


I really need help here guys, im out of ideas. About a week ago my computer started getting BSOD randomly while gaming or browsing the web. I thought it was a failing HDD so I re installed windows onto a new one after running stress tests on it to make sure it was good. I have run stress tests on everything and watched temperatures. Windows is up to date. Swapped new ram sticks to make sure memory was OK. Everything seems to check out, but i still get these errors. This is what is in the dump file. If anyone has any ideas i would greatly appreciate it.
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c13000 PsLoadedModuleList = 0xfffff800`02e50e50
Debug session time: Thu Oct 20 00:34:05.156 2011 (UTC - 5:00)
System Uptime: 0 days 0:00:28.296
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
..........................................................
Loading User Symbols
Loading unloaded module list
...
*** WARNING: Unable to verify timestamp for hal.dll
*** ERROR: Module load completed but symbols could not be loaded for hal.dll



We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attac... Read more

http://www.sevenforums.com/bsod-help-support/193129-bsod-after-fresh-install-ntoskrnl-exe.html
Relevancy 59.77%

I just got three 320GB Seagate drives setup in RAID 0 for Linux, and I decided to also reinstall Windows 8 on my SSD since it started lagging and running slower than normal. While trying to install Win8, right after selecting a disk/partition to install to, I got a BSOD about an error in a nonpaged area or something. When I tried to boot into the installer again, I got a BSOD immediately after the logo splashscreen (too quick to see what it was about). Does anyone know how to fix/bypass this?
-I'm booting the Windows 8 installer from a Corsair Survivor 64GB USB3.0 flashdrive. I'm gonna try a dvd with a different iso that I downloaded more recently on my laptop.

A:BSOD on Windows 8 fresh install

Try different media (CD/DVD or USB) and different ISO's
Try these free, bootable diagnostics: Initial Hardware Diagnostics

http://www.eightforums.com/bsod-crashes-debugging/32702-bsod-windows-8-fresh-install.html
Relevancy 59.77%

I have been experiencing a BSOD on my fresh install of windows 7. I ran the upgrade adviser before upgrading and it said my hardware was 100% compatible. Here is the info:
-32bit windows 7 pro
-The original OS was XP home
-Retail version of 7 pro
-2.5 years since the date of purchase today at 6:05 PM
-I installed 7 a week ago
-It is a windows 7 and Ubuntu dual boot.

Here is the crash message text:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: 10000000
BCP2: 00000002
BCP3: 00000001
BCP4: 81897400
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\090711-61791-01.dmp
C:\Users\Jack\AppData\Local\Temp\WER-78905-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

And .zip is attached.

A:BSOD Fresh install of windows 7 pro

I would test you ram and cpu:


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Administrator\Downloads\BSOD stuff\Windows_NT6_BSOD_jcgriff2\090111-39343-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.x86fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0x8184d000 PsLoadedModuleList = 0x81997850
Debug session time: Thu Sep 1 18:12:12.608 2011 (UTC - 6:00)
System Uptime: 0 days 0:01:58.201
Loading Kernel Symbols
...............................................................
................................................................
................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {10000000, 2, 1, 818c5400}

Probably caused by : hardware

Followup: MachineOwner
---------
*** Possible invalid call from 818eadc2 ( nt!MiInsertPageInFreeOrZeroedList+0x1e7 )
*** Expected target 818c53d0 ( nt!KeAcquireInStackQueuedSpinLockAtDpcLevel+0x0 )

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 10000000, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 818c5400, address which referenced memory

Debugging Details:
------------------
WRITE_ADDRESS: GetPointerFromAddress: unable to read from 819b7718
Unable to read MiSystemVaType memory at 819971a0
10000000

CURRENT_IRQL: 2

FAULTING_IP:
nt!KeAcquireQueuedSpinLockAtDpcLevel+20
818c5400 8908 mov dword ptr [eax],ecx

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: explorer.exe

TRAP_FRAME: 903f1ef8 -- (.trap 0xffffffff903f1ef8)
ErrCode = 00000002
eax=10000000 ebx=0000030c ecx=903f1f8c edx=830f1d9d esi=82ad1644 edi=830f1d8c
eip=818c5400 esp=903f1f6c ebp=903f1f98 iopl=0 nv up ei ng nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010282
nt!KeAcquireQueuedSpinLockAtDpcLevel+0x20:
818c5400 8908 mov dword ptr [eax],ecx ds:0023:10000000=????????
Resetting default scope

LAST_CONTROL_TRANSFER: from 818eadc7 to 818c5400

POSSIBLE_INVALID_CONTROL_TRANSFER: from 818eadc2 to 818c53d0

STACK_TEXT:
903f1f68 818eadc7 82b3dc84 82ad1644 82ad164c nt!KeAcquireQueuedSpinLockAtDpcLevel+0x20
903f1f98 818e0644 82b3dc84 82ad1644 82ad164c nt!MiInsertPageInFreeOrZeroedList+0x1ec
903f1fd8 818f2728 00001b8b c07f00f0 00000057 nt!MiPfnShareCountI... Read more

http://www.sevenforums.com/bsod-help-support/185292-bsod-fresh-install-windows-7-pro.html
Relevancy 59.77%

Good evening I have tried everything and searched over google pages for the answer to no avail I am recieving very Random win k sys BSOD Sometimes at the bottom of the BSOD it Install win32k.sys Fresh BSOD w7 states Dumping memory sometimes just a lockup Running - Windows win32k.sys BSOD Fresh Install w7 Homepremium Mobo - GA- a-d Proc win32k.sys BSOD Fresh Install w7 - AMD Phenom x Black Ram - Gig Unknown make vid - gtx ti OC factory oc Code Tech Support Guy System Info Utility version OS Version Microsoft Windows Home Premium bit Processor AMD Phenom tm II X Processor AMD Family Model Stepping Processor Count RAM Mb Graphics Card NVIDIA GeForce GTX Ti Mb Hard Drives C Total - MB Free - MB D Total - MB Free - MB Motherboard Gigabyte Technology Co Ltd GA- A-D Antivirus None I was recieving several BSOD on my old windows that related back to my Video Card drivers I was having an issue that the Installer would fail for nVidia and had to manually force drivers in I decided since it has been so many years ill just fresh install Well the install went great but now I continue to gt BSOD around win k sys its so random I cannot complete any windows updates as it sometimes Bsod s in the middle of the update causing it to revert I have attatched the Minidump file Please if theres anything else you need ask Been a stressfull couple weeks with this and I may have missed things Thank you Sorry for all the edits trying to give max info i ran sfc scannow no errors Other than Drivers from Gigabyte district game and Nvida drivers from website NOTHING has been installed This is completely fresh and all hdd were formatted nbsp

A:win32k.sys BSOD Fresh Install w7

include in specs

power supply

make
model
wattage

d/load and run the h/drive makers diagnostic utility on the h/drive

http://www.tacktech.com/display.cfm?ttid=287

if it comes up clear run

chkdsk /f
 

https://forums.techguy.org/threads/win32k-sys-bsod-fresh-install-w7.1075859/
Relevancy 59.77%

I have bought fresh BSOD. the install. day a Typicaly after a new HD motherboard cpu and ram for my old case After I put all the parts together I did transfer about GB between the BSOD. Typicaly the day after a fresh install. two old hard drives which did heat them up signifigantly One of the old hard drives has BSOD. Typicaly the day after a fresh install. the windows xp I was trying to use to debug if it was a software problem And the other old HD is needed to boot my upgrade licence version of windows but the system files are on the new GB HD I have reinstalled windows -bit a few times I have even tried running a previous version of XP Both seem to have worked fine but seem to have been steadly becoming unstable over time But both installs where on separate hard drives so a single hard drive problem would not be the case BSOD. Typicaly the day after a fresh install. With XP the symtoms where that the web browsers would have serious difficulty loading a page The errors from the browsers being can not find website to the page not fully loading With Windows the symtoms where BSOD that tended to occur the day after the fresh install System restores via install disc seem to patch the problem for a while Of course since I install the drivers for the mobo the first day every time I tried I can't rule out that the motherboard install cd could be faulty My internet connection is thru linksys wusb g v wireless adapter which did download a corrupted steam file Forgot if windows or xp error have not tested if it is a problem yet or if it was only an isolated insident Just today I tryed running the pc with the case open inorder to rule out insufficient cooling of the motherboard I was worried since the heat sink for mobo had no fan and was blocked from air flow from one side by the graphics card that cooling maybe an issue But that test failed dispite lowering the case temp a few degrees fahrenheit Attached is my only dmp file so far for this fresh install windows And I have some text below Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FB BCP FFFFF ED BCP FFFFF ED BCP FFFFF A OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Eric AppData Local Temp WER- - sysdata xml I appreciate any thing you can do for me I have run memtest from cd at boot to test the ram I only came across an error in the very first time running the test but that might have been me messing around with settings It also caused an error message to be printed out on test results area But all tests after are fine adding the suspicion of only one core being faulty as one of many of my paranoid explanations of my system problems I am happly well within warranty and I bought all my new parts from newegg I am sorry for rambling on I will try to be more helpful with straightforward answers to your questions to assist me And again I am grateful for your help

A:BSOD. Typicaly the day after a fresh install.

I suspect your wireless adapter drivers are the cause. Update them ASAP:

Code:
fffff880`03e19000 fffff880`03e6b000 WUSB54Gv4x64 WUSB54Gv4x64.sys Wed Dec 27 04:41:31 2006 (45923FCB)

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\AppData\Local\Temp\Temp7_Minidump.zip\Minidump\051110-19468-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (3 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02a1a000 PsLoadedModuleList = 0xfffff800`02c57e50
Debug session time: Tue May 11 10:13:13.053 2010 (GMT-4)
System Uptime: 0 days 0:06:17.614
Loading Kernel Symbols
...............................................................
................................................................
................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff880044ed798, fffff880044ed000, fffff88001103a91}

Probably caused by : Ntfs.sys ( Ntfs!NtfsFindPrefix+121 )

Followup: MachineOwner
---------

0: kd> lmntsmn
start end module name
fffff880`00f19000 fffff880`00f70000 ACPI ACPI.sys Mon Jul 13 19:19:34 2009 (4A5BC106)
fffff880`03563000 fffff880`035ed000 afd afd.sys Mon Jul 13 19:21:40 2009 (4A5BC184)
fffff880`11b9c000 fffff880`11bb2000 AgileVpn AgileVpn.sys Mon Jul 13 20:10:24 2009 (4A5BCCF0)
fffff880`03dd6000 fffff880`03deb000 amdppm amdppm.sys Mon Jul 13 19:19:25 2009 (4A5BC0FD)
fffff880`00d92000 fffff880`00d9d000 amdxata amdxata.sys Tue May 19 13:56:59 2009 (4A12F2EB)
fffff880`00cda000 fffff880`00ce3000 atapi atapi.sys Mon Jul 13 19:19:47 2009 (4A5BC113)
fffff880`00d68000 fffff880`00d92000 ataport ataport.SYS Mon Jul 13 19:19:52 2009 (4A5BC118)
fffff880`0128a000 fffff880`01292000 AtiPcie AtiPcie.sys Tue May 05 11:00:22 2009 (4A005486)
fffff880`034b7000 fffff880`034be000 Beep Beep.SYS Mon Jul 13 20:00:13 2009 (4A5BCA8D)
fffff880`03d9f000 fffff880`03db0000 blbdrive blbdrive.sys Mon Jul 13 19:35:59 2009 (4A5BC4DF)
fffff880`04bd4000 fffff880`04bf2000 bowser bowser.sys Mon Jul 13 19:23:50 2009 (4A5BC206)
fffff960`00740000 fffff960`00767000 cdd cdd.dll unavailable (00000000)
fffff880`03484000 fffff880`034ae000 cdrom cdrom.sys Mon Jul 13 19:19:54 2009 (4A5BC11A)
fffff880`00c00000 fffff880`00cc0000 CI CI.dll Mon Jul 13 21:32:13 2009 (4A5BE01D)
fffff880`01000000 fffff880`01030000 CLASSPNP CLASSPNP.SYS Mon Jul 13 19:19:58 2009 (4A5BC11E)
fffff880`00d0a000 fffff880`00d68000 CLFS CLFS.SYS Mon Jul 13 19:19:57 2009 (4A5BC11D)
fffff880`0131a000 fffff880`0138d000 cng cng.sys Mon Jul 13 19:49:40 2009 (4A5BC814)
fffff880`11b8c000 fffff880`11b9c000 CompositeBus CompositeBus.sys Mon Jul 13 20:00:33 2009 (4A5BCAA1)
fffff880`03feb000 fffff880`03ff9000 crashdmp crashdmp.sys Mon Jul 13 20:01:01 2009 (4A5BCABD)
fffff880`03cfe000 fffff880`03d81000 csc csc.sys Mon Jul 13 19:24:26 2009 (4A5BC22A)
fffff880`03d81000 fffff880`03d9f000 dfsc dfsc.sys Mon Jul 13 19:23:44 2009 (4A5BC200)
fffff880`03cef000 fffff880`03cfe000 discache discache.sys Mon Jul 13 19:37:18 2009 (4A5BC52E)
fffff880`01274000 fffff880`0128a000 ... Read more

http://www.sevenforums.com/bsod-help-support/84137-bsod-typicaly-day-after-fresh-install.html
Relevancy 59.77%

Hey,

Just wondering if anyone can help. Installed
I'm getting BSOD within a minute of startup of a fresh Windows 7 x64 Install.

I've tried changing RAM and a couple of other things.
I have as of yet not installed any programs, just updated my graphics card driver

I can boot into safe mode without a problem.
I can't see any hardware conflicts.

I am getting a IRQL_NOT_LESS_OR_EQUAL error on the BSOD.
I was also getting a Win32.sys error.

Any help would be greatly appreciated.

Attached are the 4 latest dump files.

Simon.

A:BSOD on fresh x64 Windows 7 Install

  
Quote: Originally Posted by nomis42


Hey,

Just wondering if anyone can help. Installed
I'm getting BSOD within a minute of startup of a fresh Windows 7 x64 Install.

I've tried changing RAM and a couple of other things.
I have as of yet not installed any programs, just updated my graphics card driver

I can boot into safe mode without a problem.
I can't see any hardware conflicts.

I am getting a IRQL_NOT_LESS_OR_EQUAL error on the BSOD.
I was also getting a Win32.sys error.

Any help would be greatly appreciated.

Attached are the 4 latest dump files.

Simon.




Simon

Hi and welcome

You have 3 distinct causes for these BSODs. First the directx portion of your video driver. The second is memory corruptoion, and the third are win 7 files

For the first I would completely remove the current driver and download a fresh copy. Install only the driver and not the rest of the things that usually get installed with them.

For memory corruption I would download memtestx86 burn it to a cd and run it for at least 5 passes.

For the win 7 files I would run a system file check
(type cmd in search>right click>sfc /scannow)

Let us know if you need more help

Ken


Code:
BugCheck D1, {fffff80001f02f50, 2, 8, fffff80001f02f50}
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiWaitForSchedulerEvents+1bc )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck A, {a4400000000, 2, 0, fffff80002893317}
Probably caused by : win32k.sys ( win32k!SURFACE::Map+a1 )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck A, {0, f, 0, fffff80002df6fde}
Probably caused by : pci.sys ( pci!PciReadSlotConfig+84 )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck 4E, {99, 73a02, 0, 74282}
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

http://www.sevenforums.com/bsod-help-support/85715-bsod-fresh-x64-windows-7-install.html
Relevancy 59.77%

Hello, I have recently got a new processor, motherboard, ram, cooler and hard drive. I have installed all of them and installed a fresh new Windows 7 install on it. I have since installed all my basic drivers; motherboard, graphics card, network adapter etc but I have gone away from my PC and when I've come back I am greeted with the message "Windows has recovered from an unexpected shut down" so it's not something that I'm doing that's causing it. I am presuming it's something to do with my hardware.

Any help would be greatly appreciated, thanks

A:BSOD on fresh new install, unknown cause

Hello and welcome John now before we start on the dump files which are mentioning something about Genuine Intel could you let us know what Windows media did you use on the new motherboard because if it was an OEM for the old mobo without Microsoft's ok you cannot use it on a new board. If the media is retail then no problems.

There is just one other little thing you have a problem device listed in msinfo32 see pic might be an idea to get that driver installed.

http://www.sevenforums.com/bsod-help-support/387726-bsod-fresh-new-install-unknown-cause.html
Relevancy 59.77%

oh someone PLEASE help me with my BSODs...
i fresh installed W7 3 times now thinking i solved my issues.

i finally cought a BSOD in progress and got a driver power state failure.
but it may not be for all my improper shutdown messages.
Is there anyway you can help me if i upload my minidumps?

please im desperate....

thank you...

A:BSOD, fresh install W7 64bit

  
Quote: Originally Posted by loueber


oh someone PLEASE help me with my BSODs...
i fresh installed W7 3 times now thinking i solved my issues.

i finally cought a BSOD in progress and got a driver power state failure.
but it may not be for all my improper shutdown messages.
Is there anyway you can help me if i upload my minidumps?

please im desperate....

thank you...



Hi loueber & welcome to our Forum,
There are quite a few capable & helpful people here who would be able to analyse your minidumps.

Refer to the links below to assist you.

http://www.sevenforums.com/crashes-d...tructions.html

http://www.sevenforums.com/tutorials...en-forums.html

http://www.sevenforums.com/bsod-help-support/115347-bsod-fresh-install-w7-64bit.html
Relevancy 59.77%

? OS - Windows 7 Ultimate 64-Bit
? Original OS - Windows 7 Home Premium x64
? Purchased OS from retailer
? Age of System - 3 Years
? Age of OS installation - Reinstalled just 4 days ago

? CPU - i7-2630QM @ 2.00 GHz
? Video Card - nVidia GTX 460M
? MotherBoard - Asus G73SW Intel Laptop Motherboard s989 (0205A) 60-N3IMB1000-C08 69N0K9M10C08
? Power Supply - ASUS 19.5V 7.7A 150W POWER SUPPLY/ AC ADAPTER
? System Manufacturer - Asus

Happy New Years everyone! I hope everyone had a great year. I purchased this laptop I'm using (Asus G73SW) from a friend earlier this year and it has been more trouble than it's worth. Hopefully I followed all of the guidelines for the post. I included the PERFMON report, the BSOD Collection .html file, and a BlueScreenView document as well. Thanks for any help or suggestions you give me!

http://www.techsupportforum.com/forums/f299/bsod-after-fresh-install-of-windows-7-a-773170.html
Relevancy 59.77%

Hey so i recently less than a week ago upgraded my windows install from bit to bit so im on a fresh windows install and everything was working fine until i left my computer on overnight to do all the windows updates and came back to find it had restarted due to a bluescreen install windows Fresh - BSOD i figured it may be a one off and didnt do anything about it until it happened while i was using it just now So i downloaded BSOD - Fresh windows install BluescreenViewer and here is the first BSOD http puu sh bxKa de b af png This is the second one that happened while i was actually using the computer http puu sh bxNu bd fd fa png I searched on the internet for a while to see if i could figure out how to solve it myself and read that using windows verifier to find out which driver is apparently responsible can be useful so i ran that and here is what that found http puu sh bxRQ ec f png Any help would be appreciated as im not sure what to do on the right hand side each BSOD says it is caused by a different driver file and im not sure what program thing either of them are attached to or from nbsp

Relevancy 59.77%

I am getting plagued by BSoDs on a fresh installed yesterday install of windows pro -bit This is the second time that windows was installed on this system The first was 64 on fresh a pro bit) BSOD install (win7 also plagued BSOD on a fresh install (win7 pro 64 bit) by BSoDs any help would be greatly appreciated Is Windows - x -bit or x bit - the original installed OS on the system Custom built system - an OEM or full retail version retail version obtained from college IT dept - OEM came pre-installed on system - Full Retail you purchased it from retailer - What is the age of system hardware pretty new built the system in march - What is the age of OS installation have you re-installed the OS installed OS on Custom built system Operating System MS Windows -bit SP CPU AMD Phenom II X T C Thuban nm Technology RAM CORSAIR Vengeance CMZ GX M A C B GB Dual-Channel DDR MHz - - - Motherboard MSI A-G MS- CPU C Graphics M VA x Hz MB GeForce GTX Ti EVGA C Hard Drives GB Seagate ST AS ATA Device SATA C GB Seagate ST AS ATA Device SATA C Optical Drives ASUS BC- B ST ATA Device

A:BSOD on a fresh install (win7 pro 64 bit)

These crashes were caused by memory corruption/exception (Cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifer






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these
- Concurrency Stress Test
- DDI compliance checking

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.
If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Thanks to JGriff2 & Usasma.


Using Driver Verifier to identify issues with Windows drivers for advanced users

Driver Verifier

Using Driver Verifier (Windows Drivers)

Avast can be a contributing cause of BSOD'S . Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

http://www.sevenforums.com/bsod-help-support/225274-bsod-fresh-install-win7-pro-64-bit.html
Relevancy 59.77%

HI All For more than a year now I have reocuring blues screen of death Here is what i did Checked memory sticks I have GB gt gt memory diagnostics everything is fine Swithched sticks to diferent slots gt gt no use Reinsatlled full system gt gt no use Daemon tools are uninstalled after which I experience less BSOD but still occures Previously ever day now every - days recently my previous HDD went bust now I have a new one still issues System checks run fine and usually when windows would load up system crashes I am really annoyed as I think I have tried a lot of possibilities Usually it is ntoskrnl exe or cdd dll that crash or when they start loading according to bluescreen viewer Pagefault in reoccurs install after even BSOD fresh non paged area boot sector errors are the main reasons usually PLease see all minidum dump files and system info attached Could you please analyse and tell what youthink Is it HDD I am beginning to think that it is the mother board that cannot handle thinkgs correctly Thank you very much in advance

A:BSOD reoccurs even after fresh install

Only one DMP file was upload if you have more please upload them so we can spot trends.

Lets eliminate the OS by running a system file check.

SFC /SCANNOW Command - System File Checker

How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
There are obviously 2 possibiliteis Software, and hardware. The fact that the re-install yieded the same problem seems to point to hardware but we need to run a few tests.

First what memory test did you use (memtest is best, the built in is useless) and for how many passes.

Ram is the most probable hardware, followed by HD, cpu, etc
To test the drivers (software) we need you to run driver verifier
Of note ::::: You might want to update to SP-1 as it eliminates many software issues in the original release


Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have a Raid update its Driver.

Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5-7 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+


Driver Verifer






Quote:
Using Driver Verifier is an iffy proposition.
Most times it'll crash and it'll tell you what the driver is.
But sometimes it'll crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows.
If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like.
From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

If you are using win 8 add these
- Concurrency Stress Test
- DDI compliance checking

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upl... Read more

http://www.sevenforums.com/bsod-help-support/225217-bsod-reoccurs-even-after-fresh-install.html
Relevancy 59.77%

Hi

I am getting a BSOD on a fresh install of Windows 7. No updates or software have been installed.

I have attached the mini dump files.

Many Thanks

A:NTFS.SYS BSOD on fresh install

Hiya and welcome to SevenForums!

Code:
BugCheck 24, {1904fb, fffff88001fea298, fffff88001fe9af0, fffff880012dfc7a}

Probably caused by : Ntfs.sys ( Ntfs!NtfsContinueIndexEnumeration+2ba )
Run SeaTools(DO NOT RUN FOR SSDS) SeaTools for DOS and Windows - How to Use

http://www.sevenforums.com/bsod-help-support/377384-ntfs-sys-bsod-fresh-install.html
Relevancy 59.77%

Two weeks ago I did a fresh install thanks to some malware I got. Last night I woke up at 1130pm to see my PC shut down. When I rebooted the BSOD came up then shut down again. Since then I rtebooted without any problems. Here's the zip file.

A:BSOD - Two weeks after fresh install

try seeing if this helps ya out any:

Blue Screen iastor.sys, STOP; 0x0000008E (0xC0000005, - Microsoft Community

http://www.sevenforums.com/bsod-help-support/327973-bsod-two-weeks-after-fresh-install.html
Relevancy 59.77%

Been getting this BSOD randomly. Thought was the vga card as computer would not wake up the next morning after being on all night. And computer would not POST once, only worked when took out vga card and used onboard video. I've since purchased and installed a new vga card. And reinstalled windows 7. But just got 2 BSOD today. So seeking some help here.

Attached SF Diagnostic Tool Logs

A:BSOD even after fresh install of Win7

Hello Subby,

I am not an expert on reading dump files.
But as reading your post, i am thinking it is the problem of your PSU. Maybe your PSU is not compatible with your Graphics card.
Can you post your system specs?

http://www.sevenforums.com/bsod-help-support/359865-bsod-even-after-fresh-install-win7.html
Relevancy 59.77%

Hi all - following jcgriff's instructions from this thread here is the information requested and attached are the zipped files from his diagnostic executables and the minidump Windows x Original OS was Vista x Full retail version purchased upgrade code from Win RC to RTM Age of system hardware Almost exactly years Age of OS installation A Persistent install BSOD even fresh after few weeks CPU Intel Mobile Core Duo P GHz Video Card ATI Mobility Radeon HD Persistent BSOD even after fresh install MotherBoard Manufacturer Dell Inc Model P H Version A Chipset Vendor Intel Chipset Model PM Chipset Revision Southbridge Vendor Intel Southbridge Model IM ICH -M Southbridge Revision Power Supply Dell brand - currently unavailable if that turns out to be a suspect I can provide in a later post I have had my Dell Studio for a couple years and I usually do a fresh install or restore from image depending on the age every year on any of my PCs This latest install was brought about by BSODs every few weeks that I believed were tied to the errant customizing I had been Persistent BSOD even after fresh install doing in files such as explorerframe dll and shellstyle dll After fetching all the latest drivers that I could find the blue screens returned in force I have scoured the net for other people's solution to my particular error codes and even installed WinDBG to try to fix it myself but this latest one came at such an inopportune time that I decided it's time to call on some real help I will provide any more information upon request I will also begin running the bootable tools tomorrow afternoon it's currently am here and post back with those results when requested Thanks so much for this great resource

A:Persistent BSOD even after fresh install

Hi -

Both BSODs named the Microsoft Advanced Configuration and Power Interface driver ACPI.sys as the probable cause.

See if hotfix for Windows 7 SP1 fits issues you're experiencing - http://support.microsoft.com/kb/2495523/en-us

Run Driver Verifier -- Driver Verifier - sysnative.com - MVP


Windbg Logs
--> http://sysnative.com/bsod2011/jcgrif..._jcgriff2_.txt
--> http://sysnative.com/bsod2011/jcgrif...riff2_.txt.zip


Regards. . .

jcgriff2


`

BSOD SUMMARY

Code:

Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Fri Apr 15 19:23:54.341 2011 (GMT-4)
System Uptime: 1 days 22:12:19.183
Probably caused by : ACPI.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_ACPI.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`03d0f830 fffff800`00b9c4d8 fffffa80`054dee10
BiosVersion = A08
BiosReleaseDate = 11/25/2009
SystemManufacturer = Dell Inc.
SystemProductName = Studio 1737
MaxSpeed: 2260
CurrentSpeed: 2261

??????????????????????????????????????????????????????????????????????????????????????``

Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Tue Apr 5 15:58:02.336 2011 (GMT-4)
System Uptime: 0 days 2:22:51.193
Probably caused by : ACPI.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_ACPI.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`03d29840 fffff800`00b9c4d8 fffffa80`03efc3d0
BiosVersion = A08
BiosReleaseDate = 11/25/2009
SystemManufacturer = Dell Inc.
SystemProductName = Studio 1737
MaxSpeed: 2260
CurrentSpeed: 2261

??????????????????????????????????????????????????????????????????????????????????????``



by jcgriff2

J. C. Griffith, Microsoft MVP

https://mvp.support.microsoft.com/profile/Griffith


www.sysnative.com

www.jcgriff2.com


??????????????????????????????????????????????????????????????????????????????????????

http://www.techsupportforum.com/forums/f299/persistent-bsod-even-after-fresh-install-566654.html
Relevancy 59.77%

Hi

I was getting frequent display driver crashes and audio clicking on Win 8 so I went back to Win 7. Things were fine for the first 24 hrs or so, but now Im getting BSOD's all the time. I have also tried going back to previous nvidia drivers from a few months ago but this hasnt helped.

Any help would be much appreciated.

A:BSOD on fresh install, NVLDDMKM.sys

Hello Mondo and welcome to Seven Forums.

In going though your latest dump file, it appears that a few drivers have been flagged and show up several times throughout the analysis. They are nvlddmkm.sys (nVidia Video drivers); dxgkrnl.sys (DirectX Graphics Kernel); and dxgmms1.sys (DirectX Graphics MMS.)

In the interest of full disclosure I condensed the dump file to a more manageable size and only show a single reference to the flagged drivers.

Driver Reference Table - nvlddmkm.sys

Driver Reference Table - dxgkrnl.sys

Driver Reference Table - dxgmms1.sys


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa80069c22d0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff88004a0c378, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 0000000000000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000002, Optional internal context dependent data.

Debugging Details:
------------------

FAULTING_IP:
nvlddmkm+135378
fffff880`04a0c378 4055 push rbp

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT

CUSTOMER_CRASH_COUNT: 2

BUGCHECK_STR: 0x116

PROCESS_NAME: System

CURRENT_IRQL: 0

STACK_TEXT:
fffff880`022d19c8 fffff880`03d13000 : 00000000`00000116 fffffa80`069c22d0 fffff880`04a0c378 00000000`00000000 : nt!KeBugCheckEx
fffff880`022d19d0 fffff880`03d12d0a : fffff880`04a0c378 fffffa80`069c22d0 fffffa80`064f5310 fffffa80`06402010 : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`022d1a10 fffff880`03db9f07 : fffffa80`069c22d0 00000000`00000000 fffffa80`064f5310 fffffa80`06402010 : dxgkrnl!TdrIsRecoveryRequired+0x1a2
fffff880`022d1a40 fffff880`03de3b75 : 00000000`ffffffff 00000000`00000243 00000000`00000000 00000000`00000002 : dxgmms1!VidSchiReportHwHang+0x40b
fffff880`022d1b20 fffff880`03de22bb : 00000000`00000102 00000000`00000000 00000000`00000243 00000000`00000000 : dxgmms1!VidSchiCheckHwProgress+0x71
fffff880`022d1b50 fffff880`03db52c6 : ffffffff`ff676980 fffffa80`06402010 00000000`00000000 00000000`00000000 : dxgmms1!VidSchiWaitForSchedulerEvents+0x1fb
fffff880`022d1bf0 fffff880`03de1e7a : 00000000`00000000 fffffa80`064f5310 00000000`00000080 fffffa80`06402010 : dxgmms1!VidSchiScheduleCommandToRun+0x1da
fffff880`022d1d00 fffff800`0311aede : 00000000`014af19b fffffa80`06422610 fffffa80`04e84890 fffffa80`06422610 : dxgmms1!VidSchiWorkerThread+0xba
fffff880`022d1d40 fffff800`02e6d906 : fffff800`02ff7e80 fffffa80`06422610 fffff800`03005cc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`022d1d80 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16

STACK_COMMAND: .bugcheck ; kb

FOLLOWUP_IP:
nvlddmkm+135378
fffff880`04a0c378 4055 push rbp

SYMBOL_NAME: nvlddmkm+135378

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nvlddmkm

IMAGE_NAME: nvlddmkm.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 50f94c87

FAILURE_BUCKET_ID: X64_0x116_IMAGE_nvlddmkm.sys

BUCKET_ID: X64_0x116_IMAGE_nvlddmkm.sys

Followup: MachineOwner
---------

fffff880`022d19c8 fffff880`03d13000 dxgkrnl!TdrBugcheckOnTimeout+0xec

fffff880`022d19e0 fffff880`04a0c378 nvlddmkm+0x135378

fffff880`022d1a38 fffff880`03db9f07 dxgmms1!VidSchiReportHwHang+0x40b
Suggest going to the driver websites and make sure you have the latest drivers. If you do, sometimes a previous version works better than the latest version. I'd also check for damaged or... Read more

http://www.sevenforums.com/bsod-help-support/286840-bsod-fresh-install-nvlddmkm-sys.html
Relevancy 59.77%

OK. attached is the zip files.
thank you in advance for helping.. this is such a pain.
blue screens when going into hibernate, or just sitting.
also blue screens going into stand by.

x64 bit W7 Ultimate
retail version
Hardware is only 2 months old
OS install 1 week ago, blue screens from day 1
all drivers are up to date by manufacturs.
1 device intentionaly disabled in device manager due to freeze problems ( ati tv tuner)
amd hex core 3.2
Gigabyte ga 890gpa ud3h
4 gigs ram
liquid cooled
1200 watt psu
thank you

A:BSOD, fresh install W7 64bit

  
Quote: Originally Posted by loueber


OK. attached is the zip files.
thank you in advance for helping.. this is such a pain.
blue screens when going into hibernate, or just sitting.
also blue screens going into stand by.

x64 bit W7 Ultimate
retail version
Hardware is only 2 months old
OS install 1 week ago, blue screens from day 1
all drivers are up to date by manufacturs.
1 device intentionaly disabled in device manager due to freeze problems ( ati tv tuner)
amd hex core 3.2
Gigabyte ga 890gpa ud3h
4 gigs ram
liquid cooled
1200 watt psu
thank you



So far you have several causes of the BSOD's. First your Rt64win7.sys driver (your realtek driver) and your vsmraid.sys (the via raid driver for amd).

You need to re-install them as well as all the following drivers.


Code:
GVTDrv64.sys fffff880`095e7000 fffff880`095f1000 0x0000a000 0x44fd22ca 9/5/2006 03:10:02
gdrv.sys fffff880`099f4000 fffff880`099fd000 0x00009000 0x49b9d175 3/12/2009 23:22:29
spldr.sys fffff880`01410000 fffff880`01418000 0x00008000 0x4a0858bb 5/11/2009 12:56:27
After that if you keep having BSOD's we can narrow the focus.

Ken J

DMP

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\100310-18267-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
WARNING: Whitespace at end of path element
Symbol search path is: SRV*C:\symbols;*http://msdl.microsoft.com/download/symbols ;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03058000 PsLoadedModuleList = 0xfffff800`03295e50
Debug session time: Sun Oct 3 18:50:29.181 2010 (GMT-4)
System Uptime: 0 days 22:20:14.617
Loading Kernel Symbols
...............................................................
................................................................
...................................................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8004c06a20, fffff80000b9c518, fffffa8003f2a240}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : Rt64win7.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8004c06a20, Physical Device Object of the stack
Arg3: fffff80000b9c518, Functional Device Object of the stack
Arg4: fffffa8003f2a240, The blocked IRP

Debugging Details:
------------------
DRVPOWE... Read more

http://www.sevenforums.com/bsod-help-support/115550-bsod-fresh-install-w7-64bit.html
Relevancy 59.77%

I did a clean install of Win10 Pro yesterday, drivers all updated, my programs re-installed, no device manager problems...

In the evening while browsing with FireFox on this forum and a second window open for another forum the system locked up and then BSOD........saying windows had a problem and must restart....

Thought I would post and see if you Expert BSOD guys can give me an idea as to what the conflict might be.....

Thanks in advance.....

http://www.tenforums.com/bsod-crashes-debugging/47146-fresh-win10-install-1-day-now-bsod.html
Relevancy 59.77%

Hi All I have this one PC that i have BSOD Fresh problems new install not been able to keep stable I have installed windows as a fresh new install multiple times Fresh install new problems BSOD now I have been getting BSOD of different types and i have no idea what the issue is I have looked around and seen that x is Hardware and Fresh install new problems BSOD is not a very helpful error code I have ran Dell hardware diagnostics on a loop and no errors have been found I have also ran Burn in test for mins and it has passed that also Fresh install new problems BSOD The BSOD don't seem to happen when anything major is running e g burn in test If im just idle on a website for couple of mins and do a quick mouse movement to click the start button or any minimized windows thats when it seems to BSOD I am also getting windows update issues with updates failing to install - this includes Windows SP If anything else is required please let me know and i will do my best to provide it Is Windows - x -bit or x x - the original installed OS on the system No - an OEM or full retail version OEM - But not pre installed on system - What is the age of system hardware Dell XPS H C - What is the age of OS installation have you re-installed the OS Fresh install Kind Regards Dan

A:Fresh install new problems BSOD

After typing out and posting my above post i clicked the start button and my system BSOD again.

I have uploaded a new BSOD dump.

http://www.sevenforums.com/bsod-help-support/155210-fresh-install-new-problems-bsod.html
Relevancy 59.77%

After i installed windows 7, fresh install on a new hard drive.

I got to the login screen for the first time, logged in, and then got a BSOD.

I restarted and logged back in it was fine....

I upload the zip file, anyone know if this is some kind of problem with my computer or if it just windows itself.

Its windows pro 64bit btw.

pentium 4, 3ghz
2gigs ddr ram
nvidia 9500gt 1 gig of ram

A:BSOD after fresh install and login

  
Quote: Originally Posted by TheMoon


After i installed windows 7, fresh install on a new hard drive.

I got to the login screen for the first time, logged in, and then got a BSOD.

I restarted and logged back in it was fine....

I upload the zip file, anyone know if this is some kind of problem with my computer or if it just windows itself.

Its windows pro 64bit btw.

pentium 4, 3ghz
2gigs ddr ram
nvidia 9500gt 1 gig of ram



In one the analysis was inconclusive, the other was caused by memory corruption. I would download memtestx86 and run it for at least 5 passes.

Let us know if you need help

Ken


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\New folder (4)\051510-22468-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 UP Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02656000 PsLoadedModuleList = 0xfffff800`02893e50
Debug session time: Sat May 15 14:22:37.092 2010 (GMT-4)
System Uptime: 0 days 0:04:18.358
Loading Kernel Symbols
...............................................................
................................................................
........
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff800026fac8d, fffff88007265120, 0}

Probably caused by : memory_corruption ( nt!MiGetNextNode+2d )

Followup: MachineOwner
---------

kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800026fac8d, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff88007265120, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!MiGetNextNode+2d
fffff800`026fac8d 488b4808 mov rcx,qword ptr [rax+8]

CONTEXT: fffff88007265120 -- (.cxr 0xfffff88007265120)
rax=0000020000000000 rbx=fffffa8001c47c40 rcx=fffffa8001c47c40
rdx=fffffa8001ade9a0 rsi=fffffa8001c12b30 rdi=fffffa8001c12630
rip=fffff800026fac8d rsp=fffff88007265b08 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000001 r10=fffff800029de1fc
r11=00000000003156fc r12=0000000000001000 r13=0000000000000000
r14=00000000000a0fff r15=00000000000a0000
iopl=0 nv up ei pl nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010206
nt!MiGetNextNode+0x2d:
fffff800`026fac8d 488b4808 mov rcx,qword ptr [rax+8] ds:002b:00000200`00000008=????????????????
R... Read more

http://www.sevenforums.com/bsod-help-support/85134-bsod-after-fresh-install-login.html
Relevancy 59.77%

Hi,

I have just formatted an reinstalled vista 64 and updated my drivers and the BIOS, and then during surfing I get a BSOD with tech. info:

*** STOP:0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF80001F143C4, 0xFFFFFA60017E7A28, 0xFFFFFA60017E7400)
Does this make sense to anyone??

Thankful for any tips!
 

Relevancy 59.77%

I installed new memory from Gb to Gb of DDR and then after about a day started getting blue screen errors 1a BSoD BCCode: fresh on install: However running MemTest said that my memory was fine According to the Motherboard manual it should be fine I know my C drive had issues so when my computer died could not boot it video on the screen looked messed up it turns out my video card failed My friend who works on my computer decided that it must have been the front fan stopped and the video card over heated Only speculation as we have not been able to nail down the issue s He also took out my pata optical drive because he felt it was causing slow downs on the computer He also redid my other HDD and installed Windows all over on that one BSoD on fresh install: BCCode: 1a and set my Tb C drive BSoD on fresh install: BCCode: 1a as E now So now Windows boots off the Gb drive I have and the Tb is as the nd drive with all my Windows files still on there so BSoD on fresh install: BCCode: 1a I can take my time going through the files to decide what to delete and what to keep Now I have gotten Blue screens so far since I got the computer back yesterday Here is the latest ones The computer has rebooted from a bugcheck The bugcheck was x a x xfffff ff xc f d xfffffa be c My friend wants me to do a check disk on my external drive because he is now saying maybe that is it because he said the computer never blue screened at his place when he had it over night but he didn't have my external drive with him there but it was unplugged and left at my place With him on the phone I ran a chkdsk f from cmd and the result is Windows has checked the file system and found no problems I told him I suspect it is NOT the external but the Tb drive I will scan the Tb on reboot My friend put the swap on that drive instead of on C C Windows system gt chkdsk f E The type of the file system is NTFS Chkdsk cannot run because the volume is in use by another process Chkdsk may run if this volume is dismounted first ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID Would you like to force a dismount on this volume Y N n Chkdsk cannot run because the volume is in use by another process Would you like to schedule this volume to be checked the next time the system restarts Y N y This volume will be checked the next time the system restarts C Windows system gt

http://www.bleepingcomputer.com/forums/t/605739/bsod-on-fresh-install-bccode-1a/
Relevancy 59.77%

I have been getting a random BSOD on a fresh Windows 8 install. It doesn't seem to happen at any given time. Sometimes its right after startup and sometimes in the middle of the night when nothing is happening. I have attached my dumps if anyone can help read them. I have tried to look at them myself but I am getting a symbols error. I appreciate the help, Thanks!

A:Windows 8 BSOD after fresh install

Some of your mini-dumps are pointing towards the file: e1c63x64.sys which is your Intel(R) Gigabit Adapter NDIS 6.x driver file. Please update this to Windows 8 64bit version: Driver Reference Table

I have also found some out-of-date drivers that you should update or remove/un-install if un-needed:

AsUpIO.sys - ASUS hardware monitoring software related:http://www.carrona.org/drivers/search.php?id=AsUpIO.sys (please un-install all ASUS utilities via the control panel/un-install programs, known BSOD maker in Windows 8)
teamviewervpn.sys - TeamViewerVPN Network Adapter: Driver Reference Table (please un-install Teamviewer and re-install the latest version if you must use it)
vstor2-mntapi10-shared.sys - VMware Virtual Storage Volume Driver: Driver Reference Table (please un-intsall VMWare and install the latest version if you must use it)

Please update anything to Windows 8 64bit versions from your motherboard manufacturers website. This should include your Intel(R) Gigabit Ethernet Driver LAN driver. Your BIOS version is 3203 and the latest appears to be 3305, you might want to update as a last resort but please if you do follow manufacturers precautions as any error might render your system inoperable:

ASUSTeK Computer Inc. -Support- Drivers and Download P9X79 PRO

Please ensure you have downloaded all the Windows 8 updates until you can install no more.

-cheers

http://www.eightforums.com/bsod-crashes-debugging/18586-windows-8-bsod-after-fresh-install.html
Relevancy 59.77%

Hi All Having got this problem before and re-installing again we are faced with a new BSOD issue Here is the exact information after re-install with no BSOD fresh softwares new that we got Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode f BCP BCP C A BCP E BCP E OS Version Service Pack Product Files that help describe the problem C WINDOWS Minidump Mini - dmp C Users VL AppData Local Temp WER- - sysdata xml C Users VL AppData Local Temp WERA tmp version txt Read our BSOD after fresh re-install with no new softwares privacy statement http go microsoft com fwlink link amp clcid x In the attachments msinfo zip contains msinfo and minidump BSOD after fresh re-install with no new softwares files And TSF Vista Support zip file contains TSF Vista Support information and also perfmon report information Could someone please let us know the probable cause of this as this has occured after a fresh installation with absolutely no new softwares installed Please let us know if there is any other information required Regards Karthik

A:BSOD after fresh re-install with no new softwares

Points at your Marvell Yukon drivers again.
Drivers are pretty old:

Code:
8c35b000 8c3a1000 yk60x86 yk60x86.sys Tue Jul 31 06:11:26 2007 (46AF0ACE)
As you've had this issue in the past, try updating the drivers again.
Also, once that's done, update all of your drivers (there's some more old one's in there) and then update to Service Pack 2.
If it still happens, then I'd suggest trying another network card to see if that fixes it.

Here's the memory dump file:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR-RC1-Desktop\Downloads\TSF_Vista_Support\TSF_Vista_Support\TSF_Vista_Support\Mini061809-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6001.18226.x86fre.vistasp1_gdr.090302-1506
Machine Name:
Kernel base = 0x81c06000 PsLoadedModuleList = 0x81d1dc70
Debug session time: Wed Jun 17 16:00:18.339 2009 (GMT-4)
System Uptime: 0 days 2:06:27.440
Loading Kernel Symbols
...............................................................
................................................................
.................................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, 83c7a030, 860e4380, 84969e28}

*** WARNING: Unable to verify timestamp for yk60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for yk60x86.sys
Probably caused by : yk60x86.sys

Followup: MachineOwner
---------

0: kd> !analyze -v;!thread;r;kv;lmtn;lmtsmn;.bugcheck
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 00000003, A device object has been blocking an Irp for too long a time
Arg2: 83c7a030, Physical Device Object of the stack
Arg3: 860e4380, Functional Device Object of the stack
Arg4: 84969e28, The blocked IRP

Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: 84969e28

DEVICE_OBJECT: 860e4380

DRIVER_OBJECT: 860e8818

IMAGE_NAME: yk60x86.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 46af0ace

MODULE_NAME: yk60x86

FAULTING_MODULE: 8c35b000 yk60x86

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from 81c39b5c to 81cd30e3

STACK_TEXT:
81cfbacc 81c39b5c 0000009f 00000003 83c7a030 nt!KeBugCheckEx+0x1e
81cfbb28 81c396ac 81cfbb94 81cfbc50 00000001 nt!PopCheckIrpWatchdog+0x1ad
81cfbb68 81cbcc40 81d144e0 00000000 3cea0f4f nt!PopCheckForIdleness+0x343
81cfbc88 81cbc800 81cfbcd0 00000002 81cfbcd8 nt!KiTimerListExpire+0x367
81cfbce8 81cbc3c3 00000000 00000000 00076be2 nt!KiTimerExpiration+0x22a
81cfbd50 81cbaedd 00000000 0000000e 00000000 nt!KiRetireDpcList+0xba
81cfbd5... Read more

http://www.techsupportforum.com/forums/f299/bsod-after-fresh-re-install-with-no-new-softwares-386607.html
Relevancy 59.77%

Hello everyone Windows BSoD after install 7 fresh New member to the forums here and I was able to be pretty ninja-like when it came to getting information required to make a post in this forum Bought a new computer weeks ago came in days ago Been having trouble with it since Usually I'm the quot Mr Fix-it quot when it comes to PC's but I've never messed around with any debugging tools so I need some assistance please any help is greatly appreciated I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death Tried both BSoD after fresh Windows 7 install RAM sticks separately took the video card out and used on-board video I even tried both RAM sticks with on-board video separately Unplugged the DVD-ROM no avail I called ASRock and got a technician who I could barely understand but was telling me something about quot XMP quot I didn't see the XMP option under the DRAM configuration even if my sticks don't support it wouldn't the option still be there I think he has my motherboard confused with another one He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it I came here to see what the BSoD DMP files REALLY have to say the problem is so I can solve it once and for all I didn't pay for new hardware to let it sit here and collect dust I appreciate any help you guys can offer SPECS Nothing is OC'd except the GPU it was OC'd straight from the factory MOBO ASRock Z Extreme Gen P latest BIOS update CPU Intel Core i Sandy Bridge ghz RAM GSkill RIPJAWS x gb DDR GPU MSI GTX-TI Twin Frozr ii gb PSU Corsair TX W HDD TB Samsung SATAII gb sec DVD-ROM ASUS SATA DVD-ROM OS Windows Ultimate bit RETAIL

Relevancy 59.77%

So I know there a few other people have the same issue but I think mine might be different. I'm currently running in Safe Mode right now because I can't sit on standard boot too long before I have a random BSOD. It's completely random and very annoying, I need help as soon as I can get it. I'll be back with my minidump file shortly, in the mean time here are my specs:

CPU: Intel i5 2300
PSU:diablotek 600W
Memory: PNY Optima PC3-10666 2x4GB
GPU: Geforce 550 Ti
Mobo: GIGABYTE Z68AP-D3
Soundcard: none
Case: Custom
PS. I thought maybe this was an install issue so I reinstalled win7 x64 again without downloading any updates and its still giving me grief.

A:BSOD after fresh install of win 7 ultimate x64

As soon as we have the dump, we can assist you

http://www.sevenforums.com/bsod-help-support/220546-bsod-after-fresh-install-win-7-ultimate-x64.html
Relevancy 59.77%

Morning,

Just spent 2 days backing up all my files to do a fresh install as BSOD were killing me, After getting my pc re loaded to where it was, its started all over again!!!!

I didnt load Bullgaurd and used a stable Nvidia driver and MSE and its still happening!!!

New RAM and Power.

Any help would be much appreciated.

Thanks
Anthony

A:BSOD on fresh install, about to give up!!!

Hello macca22.

From the dumps it appears that it is somehow a network related BSOD.

Can you tell me what is the source of your network adapter driver? It is of 26th Apr 2013.

Code:
fffff880`04089000 fffff880`040ab000 L1C62x64 T (no symbols)
Loaded symbol image file: L1C62x64.sys
Image path: \SystemRoot\system32\DRIVERS\L1C62x64.sys
Image name: L1C62x64.sys
Timestamp: Fri Apr 26 12:43:53 2013 (517A2931)
CheckSum: 00028D4C
ImageSize: 00022000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Whereas the source Atheros site says that the latest WHQL driver is dated 2010-10-22.

I would suggest you to Dwnload the network driver first, from the page Drivers for Atheros AR8151 and Windows 7.

Then uninstall the network driver.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "Network adapters" by clicking on the triangle in front of it.
Select one Atheros device item under it, right click, uninstall.
Now restart the computer.
Install the driver downloaded earlier, following Driver Install - Device Manager
Let us know the results.

____________________________________________________________________________
BSOD ANALYSIS:


Code:
BugCheck 19, {3, fffffa8006f12490, fffffa8006f12490, fffffa8006d62490}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+cbb )

Followup: Pool_corruption
-----------------------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff80002a84b82, fffff8800824b950, 0}

Probably caused by : ntkrnlmp.exe ( nt!RtlpInterlockedPushEntrySList+22 )

Followup: MachineOwner
----------------------------------------------------------------------------------
BugCheck C2, {42, fffffa800610c000, 0, 0}

Probably caused by : nsiproxy.sys ( nsiproxy!NsippEnumerateObjectsAllParameters+477 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/297984-bsod-fresh-install-about-give-up.html
Relevancy 59.77%

Hi All I have just done a clean install of Win Ultimate x on my HP G BSOD Install(7F and Fresh After Multiple 50) and not ten minutes after Multiple BSOD After Fresh Install(7F and 50) I have two blue screens less than five minutes apart My system specs would be available as per the thread but I cannot update Any attempt gives me a warning showing Multiple BSOD After Fresh Install(7F and 50) an error of B The information I can find is at the bottom of my post and the minidump is uploaded I have had issues with this device for over a year with a wide variery of blue screens and having had enough I did a reformat and then installed from disk and have only installed as little as I could Nothing was open at the time of the blue screens one happened as soon as the Windows login screen appeared the other when I opened the start menu Is there anything I have missed that would be useful Computer Tyep - Laptop Manufacturer amp Model - HP G OS - Win Ultimate x CPU - Pentium Dual-Core T GHz Mhz Motherboard - Quanta Rev Memory - GB DDR Graphics Card - Mobile Intel Series Express Chipset Family Sound Card - Intel High Definition Audio HDMI Monitor Display - Generic PnP Monitor on Mobile Intel Series Express Chipset Screen Resolution - x Hard Drive - Toshiba MK GSX ATA Device GB Antivirus - Microsoft Security Essentials Browser - IE

A:Multiple BSOD After Fresh Install(7F and 50)

Post this report:Activation Issue Posting Instructions

http://www.sevenforums.com/bsod-help-support/297936-multiple-bsod-after-fresh-install-7f-50-a.html
Relevancy 59.77%

A little back story here: So for the past few weeks I was getting tons of BSOD like pfn list corrupt, and other memory related ones. I did memtest for a few days, testing all the slots and sticks and I past all of them. I eventually found out that ntoskrnl.exe was corrupted, so I fixed that with a chkdsk and it worked OK for a few days. Then it would take numerous tries for windows to boot to the desktop, and it black screened when I did, but after a few tries I could use it.
That's why I re-installed windows.
I installed all the manufacture drivers that came with the laptop but it still is BSOD and having problems starting.
Is there an issue with a piece of hardware in my laptop?

A:BSOD and crashing on fresh install

Welcome aboard, legogoman.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Seatool for dos: SeaTools | Seagate download. Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.

If both the tests results free of errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

And let us know which antivirus do you use.
______________________________________________________________________________________
BSOD ANALYSIS:

Code:
BugCheck 4E, {99, 87f23, 0, 115c4b}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
------------------------------------------------------------------------
BugCheck 1A, {5003, fffff70001080000, 459a, 459800008b30}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+2a001 )

Followup: MachineOwner
---------

http://www.sevenforums.com/bsod-help-support/296733-bsod-crashing-fresh-install.html
Relevancy 59.77%

? OS - Windows 7
? x64
? system is 1 year old
? OS was installed today
? CPU is AMD Phenom II X4 925 (3.6ghz)
? Video Card is ati radeon 4890
? MotherBoard is gigabyte amd ultra durable 3
? 500w OCZ

hey yall,

i dont know an awful lot about computers, my friend built and installed 7 on this one for me, i'd just like it to work without bsods so i can enjoy it before i have to leave again. i appreciate all yall replies and will check back here in a week or so since yall seem mighty busy. peace and take care.

steve

A:BSOD on fresh win7 x64 install

bump as this has fallen to page 3, really appreciate your time guys, ty.

http://www.techsupportforum.com/forums/f299/bsod-on-fresh-win7-x64-install-465858.html
Relevancy 59.77%

Hello guys ive been having issues for quite a while now and windows install BSOD fresh after of ive been trying to solve this matter but so far ive only failed Ive ran memtest a and i BSOD after fresh install of windows found several million errors So i scanned through and ramslot to try to determine which ram was giving the errors this only resulted in of my ram had only error I found this weird so i thought it might be the DIMM thats corrupted So now i BSOD after fresh install of windows removed of my rams and i BSOD after fresh install of windows only run with which passed the test Still i get unexpected shutdowns aka BSOD Ive tried to remove my SSD and only use my HDD back and forth changing to IDE inside BIOS but with no good results at all Ive also tried to change my PSU to a different brand but all volts seems ok I also reinstalled windows with USB CD from HDD yeah you name it different versions etc i even tried to install Windows but with the same result This all actually just started out of the blue i have no clue how but i didnt install anything all of the sudden i started having connection problems which resulted in BSOD Specs Asus P X PRO LGA- Intel I- X ghz six core gb ram Corsair Vengeance mhz EVGA Geforce GTX gb ram W Cooler Master M Silent Pro PSU GB Crucial SSD TB HDD Samsung Im kind of clueless All kind of help will be appreciated Thank you Problem signature Problem Event Name BlueScreen OS Version Locale ID Additional information about the problem BCCode BCP FFFFF A C BCP BCP FFFFF D E BCP OS Version Service Pack Product Files that help describe the problem C Windows Minidump - - dmp C Users Computer AppData Local Temp WER- - sysdata xml Read our privacy statement online http go microsoft com fwlink li cid x If the online privacy statement is not available please read our privacy statement offline C Windows system en-US erofflps txt Files Download - - dmp from Sendspace com - send big files the easy way - gt - - dmp Download WER- - sysdata xml from Sendspace com - send big files the easy way - gt WER- - sysdata xml

A:BSOD after fresh install of windows

Run memtest from hcidesign along with your other programs.

http://www.sevenforums.com/bsod-help-support/266317-bsod-after-fresh-install-windows.html
Relevancy 59.77%

I've been having random BSOD crashed for about a year now, since I assembled this machine. 3 or 4 different error codes, all of which pointed to memory issues from what I could find online.
I performed a fresh install of Win7 a few nights ago, including a format of my HDD. 2 or 3 days later, the first BSOD occurred.

Basic Information:
Win7Prox64
Intel Core2Quad Q8300 (@2.5GhZ) Processor
Gigabyte P31-ES3G Motherboard
4gigs DDR2 PC2-8500 Ram (2x2gb) Memory Master RAM
300g Western Digital SATA Velociraptor HDD.
Radeon HD5750 Video Card

Attachment includes my System Health Report (Html file) And the Bluescreen Dump report (Both as requested in the posting guidelines forum).

Thank you in advance for any and all help

A:BSOD after fresh Win7 Install

  
Quote: Originally Posted by Porkstorm


I've been having random BSOD crashed for about a year now, since I assembled this machine. 3 or 4 different error codes, all of which pointed to memory issues from what I could find online.
I performed a fresh install of Win7 a few nights ago, including a format of my HDD. 2 or 3 days later, the first BSOD occurred.

Basic Information:
Win7Prox64
Intel Core2Quad Q8300 (@2.5GhZ) Processor
Gigabyte P31-ES3G Motherboard
4gigs DDR2 PC2-8500 Ram (2x2gb) Memory Master RAM
300g Western Digital SATA Velociraptor HDD.
Radeon HD5750 Video Card

Attachment includes my System Health Report (Html file) And the Bluescreen Dump report (Both as requested in the posting guidelines forum).

Thank you in advance for any and all help


Memory corruption possibly caused by malware bytes
I would run memtest and remove mbam and replace with Microsoft security essentials
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.
Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot. Test the sticks individually, and if you find a good one, test it in all slots.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\021711-18127-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0xfffff800`02a5a000 PsLoadedModuleList = 0xfffff800`02c97e50
Debug session time: Thu Feb 17 18:32:26.296 2011 (GMT-5)
System Uptime: 0 days 0:09:33.184
Loading Kernel Symbols
...............................................................
................................................................
........................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa98619de9fb, 2, 0, fffff80002aeb895}

Probably caused by : memory_corruption ( nt!MiUnlinkPageFromLockedList+265 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffa98619de9fb, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002aeb895, address which referenced memory

Debugging Details:
------------... Read more

http://www.sevenforums.com/bsod-help-support/145295-bsod-after-fresh-win7-install.html