Windows Support Forum

Multiple BSOD errors, same cause - ntoskrnl.exe+1850e7

Q: Multiple BSOD errors, same cause - ntoskrnl.exe+1850e7

Hi Eightforums,

I have been experiencing a few BSOD's yesterday, but most of them today. I have attached the a report from the SF Diagnostic tool. From a bit of research I found out that is could be most likely be a Windows (core file?) or a driver error. As the title suggests I got 3 different errors and they are PAGE_FAULT_IN_NONPAGED_AREA (the one I get most often), ATTEMPTED_WRITE_TO_READONLY_MEMORY and this BAD_POOL_HEADER.
Hopefully that is enough for you to find the error.


Relevancy 100%
Preferred Solution: Multiple BSOD errors, same cause - ntoskrnl.exe+1850e7

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link (This link will automatically start a download of Reimage that you can save to your computer.)

A: Multiple BSOD errors, same cause - ntoskrnl.exe+1850e7

Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions Please use Option 1 as it provides Event Viewer logs.

If you didn't run the "Grab All", then please do so. If you did run the "Grab All" then the report generator was terminated too early. Please let the app run for at least 15 minutes (or until the app itself says that it's done).

Most of the memory dumps blame ELTIMA Software's Hide My Folders ActiveX driver (HMFAxCore5decdc700443adec5f3e84408e3098ff.sys )Please uninstall this program and see if that stops the BSOD's
The following is for informational purposes only.

**************************Tue Sep 16 19:39:51.844 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-69671-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:13:05.611
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck BE, {ffffc00072ba7000, 80000001d401b121, ffffd00037a464f0, b}
Arg1: ffffc00072ba7000, Virtual address for the attempted write.
Arg2: 80000001d401b121, PTE contents.
Arg3: ffffd00037a464f0, (reserved)
Arg4: 000000000000000b, (reserved)
FAILURE_BUCKET_ID: 0xBE_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
**************************Tue Sep 16 19:25:09.050 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-58562-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:27:09.818
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck 50, {ffffc000c93a8000, 1, fffff8002d687162, 0}
Arg1: ffffc000c93a8000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8002d687162, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000000, (reserved)
FAILURE_BUCKET_ID: AV_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
**************************Tue Sep 16 18:56:51.443 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091714-86937-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 17:33:09.210
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck 50, {ffffc000fef5d000, 1, fffff800b1a08162, 0}
Arg1: ffffc000fef5d000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff800b1a08162, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000000, (reserved)
FAILURE_BUCKET_ID: AV_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
**************************Tue Sep 16 01:22:48.311 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091614-29109-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:07:37.078
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck 50, {ffffc0003f213000, 1, fffff8016ddd9162, 0}
Arg1: ffffc0003f213000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8016ddd9162, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000000, (reserved)
FAILURE_BUCKET_ID: AV_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
**************************Tue Sep 16 01:13:46.762 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091614-27046-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 3:46:55.528
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck 50, {ffffc00161954000, 0, fffff801481bb162, 0}
Arg1: ffffc00161954000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff801481bb162, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000000, (reserved)
FAILURE_BUCKET_ID: AV_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
**************************Sat Sep 13 01:51:25.000 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091314-42859-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 4:47:06.767
*** WARNING: Unable to verify timestamp for aswSP.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSP.sys
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by :aswSP.sys ( aswSP+22ca8 )
BugCheck 19, {e, ffffc00194185ee0, c0019ee63520ffff, 7849cf596272d9e7}
BugCheck Info: BAD_POOL_HEADER (19)
Arg1: 000000000000000e,
Arg2: ffffc00194185ee0
Arg3: c0019ee63520ffff
Arg4: 7849cf596272d9e7
PROCESS_NAME: TiWorker.exe
FAILURE_BUCKET_ID: 0x19_e_aswSP+22ca8
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
**************************Fri Sep 12 21:03:30.487 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091314-89609-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:18:01.255
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck 50, {ffffc000660e8000, 0, fffff8012b7da162, 0}
Arg1: ffffc000660e8000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8012b7da162, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000000, (reserved)
FAILURE_BUCKET_ID: AV_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A
**************************Fri Sep 12 20:44:27.935 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091314-45093-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
System Uptime:0 days 0:32:58.703
*** WARNING: Unable to verify timestamp for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
*** ERROR: Module load completed but symbols could not be loaded for HMFAxCore5decdc700443adec5f3e84408e3098ff.sys
Probably caused by :HMFAxCore5decdc700443adec5f3e84408e3098ff.sys ( HMFAxCore5decdc700443adec5f3e84408e3098ff+8162 )
BugCheck 50, {ffffc001dd11b000, 0, fffff8006efe4162, 0}
Arg1: ffffc001dd11b000, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8006efe4162, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000000, (reserved)
FAILURE_BUCKET_ID: AV_HMFAxCore5decdc700443adec5f3e84408e3098ff+8162
CPUID: "Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz"
MaxSpeed: 2400
CurrentSpeed: 2394
BIOS Version 1.50
BIOS Release Date 10/09/2013
Manufacturer TOSHIBA
Product Name Satellite L50-A

3rd Party Drivers:
The following is for information purposes only.
Any drivers in red should be updated or removed from your system. And should have been discussed in the body of my post.

**************************Tue Sep 16 19:39:51.844 2014 (UTC - 4:00)**************************
LGVirHid.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
LGBusEnum.sys Mon Nov 23 20:36:48 2009 (4B0B38B0)
HMFAxCore5decdc700443adec5f3e84408e3098ff.sys Wed Nov 24 05:09:20 2010 (4CECE450)
GEARAspiWDM.sys Thu May 3 15:56:17 2012 (4FA2E2E1)
tos_sps64.sys Sun Jun 17 21:21:30 2012 (4FDE829A)
FwLnk.sys Tue Jul 10 04:35:43 2012 (4FFBE95F)
TVALZFL.sys Sat Jul 21 18:29:07 2012 (500B2D33)
TVALZ_O.SYS Wed Jul 25 19:23:25 2012 (50107FED)
tdcmdpst.sys Wed Jul 25 19:41:48 2012 (5010843C)
HECIx64.sys Mon Dec 17 14:32:21 2012 (50CF7345)
RtsUVStor.sys Tue Jan 15 04:33:44 2013 (50F52278)
npf.sys Thu Feb 28 20:31:24 2013 (513004EC)
THAccel.sys Mon Mar 25 06:01:11 2013 (51502067)
L1C63x64.sys Sun Mar 31 23:15:17 2013 (5158FBC5)
iaStorA.sys Thu Aug 1 21:39:52 2013 (51FB0DE8)
dump_iaStorA.sys Thu Aug 1 21:39:52 2013 (51FB0DE8)
Thotkey.sys Thu Aug 15 02:13:20 2013 (520C7180)
RTKVHD64.sys Wed Aug 21 00:48:22 2013 (52144696)
intelppm.sys Thu Aug 22 04:46:35 2013 (5215CFEB)
SynTP.sys Fri Aug 23 06:24:51 2013 (52173873)
Smb_driver_Intel.sys Fri Aug 23 06:27:07 2013 (521738FB)
iwdbus.sys Thu Sep 26 17:38:04 2013 (5244A93C)
athwbx.sys Thu Oct 17 05:46:01 2013 (525FB1D9)
igdkmd64.sys Mon Oct 28 17:57:02 2013 (526EDDAE)
tosrfec.sys Wed Oct 30 23:20:55 2013 (5271CC97)
mfmonitor_x64.sys Thu Oct 31 11:34:06 2013 (5272786E)
nvlddmkm.sys Mon Nov 4 21:54:58 2013 (52785E02)
nvpciflt.sys Mon Nov 4 21:55:23 2013 (52785E1B)
VBoxNetFlt.sys Wed Dec 18 11:13:29 2013 (52B1C9A9)
VBoxUSBMon.sys Wed Dec 18 11:13:29 2013 (52B1C9A9)
VBoxDrv.sys Wed Dec 18 11:19:08 2013 (52B1CAFC)
WiseFs64.sys Fri Mar 14 02:11:04 2014 (53229D78)
btfilter.sys Thu Apr 24 23:01:52 2014 (5359D020)
aswHwid.sys Thu Jun 26 07:31:26 2014 (53AC048E)
aswMonFlt.sys Thu Jun 26 07:32:51 2014 (53AC04E3)
aswRdr2.sys Thu Jun 26 07:33:28 2014 (53AC0508)
aswKbd.sys Thu Jun 26 07:34:01 2014 (53AC0529)
aswSnx.sys Thu Jun 26 07:34:44 2014 (53AC0554)
aswRvrt.sys Thu Jun 26 07:35:39 2014 (53AC058B)
aswVmm.sys Thu Jun 26 07:35:49 2014 (53AC0595)
aswStm.sys Thu Jun 26 07:47:09 2014 (53AC083D)
aswSP.sys Wed Jul 2 13:38:12 2014 (53B44384)
**************************Tue Sep 16 18:56:51.443 2014 (UTC - 4:00)**************************
LGSHidFilt.Sys Thu May 30 11:16:33 2013 (51A76D51)
HMFAxCore5decdc700443adec5f3e84408e3098ff.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
mfmonitor_x64.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
WiseFs64.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.
Relevancy 22.36%

I am purchasing a MSI GTX 960 Gaming 4G GPU, and I think it has capablilities for 4 monitors to be displayed as a single desktop. If this is true, what cables should I get, and any ideas for decent cheap monitors? My plan is to have three monitors side by side as a single entity, and a fourth on the side as a reference screen (I would prefer this one to be rather small, like 6-8 inch)

A:Multiple Monitors?

You should count a number of output ports in your system first. Found a good guide on this topic:
Relevancy 21.5%

How can I setup multiple monitor in Eyefinity?

My Card is Sapphire Dual-X R9 270x 2GB I Have 2
Connections are I have 2 Monitors connected on 1 Card then 1 Monitor for the other
All of it are in DVI
Problem is in Eyefinity I don't know how to setup for it to be only one whole desktop

A:Setting Up Multiple Monitor with 2 Graphics Card in Eyefinity

I would check this thread out:
Relevancy 21.5%

I am creating a small demo software wherein 4 simple mono-audio speakers need to be connected to my laptop, the main program, written in Java will play audio from one of the speakers depending on the input cue.

How do I go about achieving this? Any tips, hints most appreciated.


A:Connecting multiple speakers to my laptop and controlling them individually

First, the laptop audio is not a home sound system and can be easily overloaded with what you are attempting - - don't drive this at high output volumes!

this will show the wiring to get all 4 with output at the same time.

The speakers in parallel like this create a load 4x heavier than just one speaker.
Get 8ohm speakers like these
which will reduce the load to only 2x.

The red circles are individual volume controls. Place a toggle switch between the controls and the speakers and you can play 1, 1+2, 1+2+3 or all four.
Relevancy 22.36%

Alright here we go it s my first time here I don t got any help searching so gonna ask here The first problem is that my notebook has recently a Bad Image error when I try to install programs like if I download in baixaki Advanced SystemCare he tells me that got a bad image Also I can t install so much things and the cleaners anti-virus thanks to that some programs as Fire Fox too here let me show you It doesn t Constantly errors and Bad blue Image screens change the error I think with others it always say this jscript dll and yeah I will not make another thread so I think I am able to show all the problems here I didn Constantly Bad Image errors and blue screens t read rules Second one much KERNEL DATA INPAGE ERROR blue screen but not frequently sometimes he freezes and does that It already maked it constantly when it was starting and I fixed it I think I think those problems are related to my HD or motherboard isn t it Third one everytime I open chrome he say that he isn t my principal browser and when I click to make it he doesn t do Constantly Bad Image errors and blue screens Also his image is bugged P S I don t remember when exactly this error of Bad Image started I was in the past without it and it suddently appeared I know that can appear by I installing something I was downloading so much in the forums GTA SA Mods P S I play so much games on that frequently War Dota Tibia GTA and others RPG but now only War Dota So waiting if you can help me nbsp

A:Constantly Bad Image errors and blue screens

Sorry I forgot, the KERNEL_DATA_INPAGE_ERROR was already constantly appearing when I start windows. Not expecified that.
Relevancy 23.22%

New laptop Whenever I try to map network a windows drive in my laptop to windows laptop I get the following error that the spelling may not be correct but this is not true Can t find quot computer c quot May be spelling I have checked Win 8.1 Win between and 7 Networking errors the spelling finding no problems and I have opened all Networking errors between Win 8.1 and Win 7 folders for sharing and security is set the same way reading and writing as Networking errors between Win 8.1 and Win 7 when I network windows drives to other windows drives I always use the correct password if requested I have no problem between win drives What am I missing I don t have the same problem going from to windows Under homegroup files seem to be recognized For many years including XP days Networking errors between Win 8.1 and Win 7 I have been coping and transferring files and folders from one computer disk on computer X to another disk on a different computer called computer Y I could copy in both directions but I had to set up each drive separately I used map network drive icon Map as drive quot found when I opened Computer icon After setting in property the sharing and security settings a certain way I could copy back and forth Each computer was given a name such as C- C and Computer All I am saying is that in one direction of copying I can copy but in the other direction I get a possible spelling error Of course there is no spelling error I know that Windows is somewhat different from Windows Both use a name found under User folder and both use a password The computer name is most obvious and is different from the name found under User folder So what seems to be the problem Should be simple enough Jim nbsp

A:Networking errors between Win 8.1 and Win 7

You need ports 137-139 opened on both systems for names to resolve.

Get the IP address of both systems and then access using the IP of the target. If that works, it is a name resolution issue.
Relevancy 21.5%

So... like most of world my family lives online. Having found that ISP pricing in Alaska is horrendously expensive, I want to find a solution that I can create 4 SSIDs, one for each of my three kids (ages 12, 14, &16) and one for me and my wife, and place a data cap on each SSID so that I can't be hit up with the bills that come with overages. I figure with individual SSIDs they can use what ever device they have with out having to detirmine MAC addresses or IPs used or any of that other stuff.

I would like to have just one router be able to accomplish this. I have an older router, an Apple Time Capsule I bought about 6 years ago, but as I don't use Macintosh computers any more, I would be happy to buy a new router and get it set up to manage this dilema.

Any Advice or suggestions will be greatly appreciated.

Relevancy 30.53%

Our ISP recently updated their hard ware to work with the Sprint network Note our ISP is not Sprint but the local phone company Our Hardware Internet DSL highest speed available Modem Comtrend ISP provides Router Belkin N Computer yr old Dell running XP - service pac - wired connection Kindle Fire first edition no HD etc - wireless connection Xbox - wireless connection Issues Xbox - went from constantly bumped from Xbox Live game by losing internet connection to not being able to enter a game at all Kindle - went from occasional quot network error message during online tasks to having to restart download multiple times or refresh page for most any or all online tasks Computer - have to click refresh to get most any page to load after the home page What we ve tried so far I have recently cleared the cache on both the computer and Kindle XBox s new security measures have been met My questions Do any or all multiple issues devices Multiple over of these issues seem to be related Is there a piece of equipment or something we may be missing to make all of these things work I am a networking novice Who should I call to get these issues corrected my ISP or a tech service Note if I start with the ISP and they do not find an issue I have to pay for the call nbsp

A:Multiple issues over multiple devices

First. You should try to NOT use a wireless connection for any type of gaming: PC, Mac, Console, etc. If you can hard wire the xbox you'll be waaay better off than using wireless.

Now... Yes, the issues could be related - there maybe an issue with the Belkin N router. I'd try to first reset the Belkin router to default settings, check on manufacturer website for instructions how, most routers you can press a "reset" button w/ a paperclip or ball point pen. Reconfigure the Belkin router, recreate the wireless network and see how everything works. If you are still having issues, humor me and connect the Dell directly to the DSL modem, bypassing Belkin router. See if you still have connection issues, if you do then it could be the DSL modem that is the problem and call your ISP to replace. If you don't have same issues then it's most likely an issue with the Belkin router. Replace it. Don't buy the dirt cheapest router at the store, but you most likely don't need the most expensive one either. Find a good middle ground router, ask sales associate to assist you accordingly.

Post back, Hope this helps!!
Relevancy 22.36%

Hello for some time now been a few months now didn t really notice it at first I ve been experiencing weird horizontal artifacts in video playback They are computer-based as I can show you by pasting a screenshot They move and jitter during playback I also notice these artifacts even as I type to you with and Video HD errors 6800 artifacts Radeon now whenever I type I see the artifacts blinking on and off and they might stay on off I tried updating all my codecs and my GFX driver but that caused more problems as now a game I tried to play Orcs must Die had a weird horizontal crossbar going up the menu screen and other such weird behaviour This was not present in my former drivers so now I m thinking of a rollback or alternative drivers Omega Might be something to do with my ancient overheated and now dusty with age CPU that s probably suffered from overclocking over the years E but it also might be my relatively old GPU However I didn t have these problems during the first half of last year that much I know I m running Win bit with gb of ram Any advice beyond finally going ahead and changing the MB CPU and VGA Thanks nbsp
Relevancy 21.5%

So, I recently bought an Asus UX31a running windows 8(in may) and it was working perfectly until a couple months ago. The only browser that works is internet explorer, which is disgusting (I miss Google Chrome) and several programs such as Adobe reader, Google drive, steam and visual studio either lag for about 5 mins each whenever I want to use them (or click something in them), or I have to close them with the task manager because they aren't responding...(This includes when I want to open pdf documents in internet explorer.

I've run several virus checks with ESET smart security which hasn't ever found any viruses...

It would be a great help if anybody could help me find what the problem is.

A:Multiple programs are stopping to work, also, I don't appear to have had or ever have a virus.

Try using a new Windows Restore point. This may not work because of "it was working perfectly until a couple months ago"... It is most likely caused from a stubborn malware infection other than a virus
Relevancy 22.36%

I have a asus rampage extreme II i7 cpu stock fan.The Antec case has a huge 200 mil top fan a standard exhaust fan and two front fans all have speed controls except cpu fan,if I adjust any fans speed above low it shuts off the cpu fan if I adjust any fan to hi the cpu fan shuts off.
Relevancy 21.5%

Hey multiple Black screen with video playback guys I have been trying to figure out this problem but with no avail so any advice is greaty appreciated Basically the problem occurs when running any type of Black screen with multiple video playback game wow and ffxi to name a few but occurs with everyone and then tab out to wither youtube fraps and the like the screen goes totally black and I must restart the computer Ive wiped the HD several times and have redone even to the most basic setup and it still occurs Specs are as follows Motherboard Asus maximus v extreme Intel i k gb Corsair Vengeance gb SSD w PSU x ASUS Radeon HD gb Ive made sure all drivers are up to date I have run memtest on both sticks of ram and they seem to pass with no errors when only video card is plugged in Black screen with multiple video playback I have no problems it seems to have something to do when they are crossfired I ve tried different bridges and still same result nbsp

A:Black screen with multiple video playback

Sounds like we have the same thing going on. Does your screen have any windows poop up? mine does.
Relevancy 22.36%

I was pre-testing a card that I got from china to see if it was what I ordered before trying to sell the rest of the cards on ebay the card said it was gigs Fat when I looked at it on my windows PC Next I put a song on it and it seemed to be working ok and then I tried for format the card While it sd fixing about 3 micro errors. cards questions was Formating it went to Default exFAT gigs but I knew my MP player will not be able to handle exFAT so I tried to use a tool to change its format back to Fat After clicking format I saw that it was taking a vary long time to format but then I saw I did not check quick format so I hit stop and nothing happened so I hit X on the tool and still nothing happened so I clicked ctrl-alt-exit and made it stop that way but after that it then said the card needs to be formated so I tried to format it back to Default exFAT but befor clicking format it now only says it will format to gigs and not gigs o O so I was thinking maybe that is just a error and will be fixed after clicking format 3 questions about fixing micro sd cards errors. so I clcik format and it gives me a error it says Windows was unable 3 questions about fixing micro sd cards errors. to complete the format so how do I get it to format back to gigs and back to Fat --------------------------------------------------------------------------------------------------------------------------- And here is my nd question a month ago I sold a guy of my cards on ebay now he is saying this Dear Piratekitty When I installed the card in my Clip it gaves errors when trying to copy music to it and when I tested it with H test I formatted the card as FAT and now it shows as MB capacity I ve tried reformatting it several times with the same results with Windows and SDFormatter I tried it in a Cowon J with the same results Please tell me how to access the full GB on this card or replace this card with a real GB card that works Regards ---------------------------------------------------------------------------------------------------------------------------------------------------------- rd question is is subject all my falt before selling the items I put quot how to Instructions in the items I am selling on ebay and my question is what if my how to instructions are making my buyers have have Can you read my instructions and tell me if it is causing errors for my ebay buyers Important Notice Please Read By default the cards format is exFAT amp not all items can read exFAT format If your item can not read exFAT format you will get a error but you can fix this by changing the cards format Q What to do if you need to change your cards format First check to see what kind of format your device can read Next google how to change the format of exFAT to the format that your device can handle there are a lot of websites out there with step by step methods After that follow the steps that the website tells you I perfer watching how to videos on youtube And finaly when your done if you still find that your geting a error please let me know amp I will help you ASAP Notes about formating When you want to delete everything I sugest doing so with the file formater the website in step gives you If you dont you will end up changing your fixed format back to the cards Default exFAT I found everything I told you out when my mp player only worked with FAT amp not exFAT So I looked on youtube amp found nbsp

A:3 questions about fixing micro sd cards errors.

the card said it was 64 gigs (Fat32) when I looked at it on my windows 7 PC.

Next I put a song on it and it seemed to be working ok and then I tried for format the card.Click to expand...

Rule number one:- if it isn't broken then don't fix it.

The issue here is windows will not format Fat32 above 32gb, so invoking the formatter when all you needed was to delete the file was a major mistake.

Personally, your online handle Piratekitty and the fact that you are reselling on the net bothers me. I've pointed you in the right direction this time, but will not respond in the future to your postings.
Relevancy 21.93%

See the description in full on the site

A:Multiple vulnerabilities in Cisco ASA software

I read about this yesterday. This is a big exploit and needs to be fixed. Too bad there are too many newbies that wont know how to update the firmware or arent even aware of this issue.
Relevancy 21.93%

Guys I ask this just out of curiosity what is the pros and cons of more than one monitors.Does they have any uses than gaming?thanks

A:Pros and cons of multiple displays

Yes. I have a two monitor set up, (with an "extended desktop")
One I have in portrait, the other in landscape.
These are primarily for desktop publishing purposes.
Sometimes I want to view my work one way, sometimes the other.

I had always wondered how anyone would like it for gaming.
Seems to me the movement between screens, and breaks in field of vision could be issues.
But, I am not a gamer, so what would I know.

Cons? for me?
Holding my neck / head in one position for extended periods ,
other than a centered/neutral position,
can result in some neck pain.
Solution is to compensate by how I position myself,
and using the dual monitor stand's full ability to tilt, swivel etc.
Younger persons may not notice the issue as much.

I cannot imagine how I would use a set up with more than two monitors though.

This stand has been excellent for my purposes.
They also make a four monitor (2x2) version,
and I have seen stands where you can mount 3 monitors side by side.

By the way this set up is used alternately with..
a) Dell Vostro 3550 Laptop (has an i3 processor, and both HDMI and VGA out)
b) On board graphics with a Gigabye GA-Z77X-UD5H (has two HDMI, plus DVI, plus VGA)
So, no fancy graphics card setups here!
Relevancy 22.36%

What is the usual diagnosis or outcome when an HP C AIO won HP many not self errors diagnostic; test printing printer t print a correct Self Test Diagnostic from control panel It printed it one won t print another because of multiple errors was missing ALL data from boxes amp sections of pg report - except color print test boxes looked fine Just printed report sections headers amp data boxes Gone through usual printer reset steps power reset HP printer not printing self test diagnostic; many errors clearing hardware error codes via quot secret menu quot then unplugging amp waiting sec That clears or more errors but they re-appear The errors just rotate clear another pops Carriage or paper jam neither true carriage moves easily HP printer not printing self test diagnostic; many errors by hand - isn t quot jammed quot when reports it Hitting OK starts carriage moving again No paper or bits Took lid amp top cover off No paper bits that are visible - front back inside paper tray area w o dismantling entire unit Ink system failure printed perfect text lines amp color boxes on the partial HP printer not printing self test diagnostic; many errors self test after that error appeared amp was cleared - several times Pump Motor Stalled DON T think ink motor is stalled or not working Printed perfect lines headings amp color boxes on the one self test lacking data With top cover off can see all pump gears belt turning normally in warm up Pump sounds normal during printer prep Paper pick up rollers NOT turning - that s true except for ONE self test w o the data They turn easily by hand not dirty - just don t engage Is it just fried With so many errors - most seem false AND unable to print accurate self test diagnostic not sure this is just a quot reset quot issue Had a power outage - but it was on surge protector UPS w voltage control - ALONG w modem router VOIP ATA PC monitor None were damaged Tried plugging printer into wall outlet - no change DC voltage of printer adapter checks OK w meter IS it a POSSIBILITY though AC adapter voltage is OK it s not delivering correct mA Not sure how to check DC mA of AC adapter - any advice there It cost after tax - yrs ago at steep discount Light use If it s toast not sure I d buy an HP not just because of this - more for HP s apparent declining reputation For avg home use - All In One types wondering which brand now has best satisfaction reliability AND least trouble using generic ink Maybe they re all junk now As in now yrs of light use may be avg life DON T want one w colors combined in or cartridges Thanks nbsp

A:HP printer not printing self test diagnostic; many errors

Seems toast to me. You've been pretty thorough.
Relevancy 21.93%

Hi Fellows I have TOSHIBA GB HDD I made it external delayed showing External to 0MD size failed due errors write HDD HDD through a drive case and using it since few months for storing the data it has partitions Now External HDD showing 0MD size due to delayed write failed errors I have a problem with it A week before the drive started giving following errors when I was plugging it in to the system There might be a problem with some files on this device or disc this can happen if you remove the device or disc before all files have been written to it Delayed Write Failed I O Device Error Initially it was only reading two partitions after - days it only showed one partition not all data then now it is showing partition with zero data with zero mb total disk space It is asking to format each partition I am trying to open I tried to access the HDD from multiple systems XP VISTA SEVEN but same MB size showing up now every time How can I get the external HDD back to normal state without losing the data already there please help Thanks nbsp

A:External HDD showing 0MD size due to delayed write failed errors
Check the drives for errors as instructed in the link above^. This may take a few hours depending on the size of the drive. If this fails then we will resort to other options. After doing some research, it seems as if this error occurs a lot in XP.
Relevancy 23.22%

I have an old fujitsu stylistic LT C-500 pen tablet which gives 4 errors on boot up. The first is query support failed. It has to do with fujitsu display monitor application.The second is pen tablet failed to initialize and pen functionality is not available although I just installed a new driver and it works fine. The third error secure attention sequence error which says it is unable to create a tray icon for the secure attention sequence application. The fourth error is WMI Error: Error accessing class instance. It also has to do with fufitsu display monitor application. I have wxp installed and a .5 ghz processor with 128 mb ram. Eveything seems to work just fine except for that.
Relevancy 22.36%

Hello I am currently working as the IT for this clinic and other clinics as well We are all networked in together despite being miles apart from one another We currently have an older computer running XP as a file server so certain files can be accessed and updated from any of these clinics The problem is that there can only be users accessing it at once We have grown just offices Multiple in the short time I have been here This computer was setup before I was hired on We are now in need another computer to give us the same functions Most of our computers now are on Windows bit There are still plenty Xp computers Multiple offices as well I am wondering how to get a Windows computer to host files in the same way I Multiple offices can get it to where this entire building can access this public folder but none of the other clinics can Are ip setup is like this x--- x The second to last digit represents the office There will be offices in Multiple offices all that will need access Any ideas how to make it so all offices can reach this folder P S I can dig up an Xp computer if it will be easier nbsp

A:Multiple offices

You are still going to be limited on the number of simultaneous connections... I would personally put a linux smb server in place of that current file server if someone has the skill to set one up and manage it (hint: you).
Relevancy 22.36%

Morning all The audio jack on my tablet has stopped working which doesn t bother me too much because I ve got some bluetooth headphones which I use to listen to my music on there However I ve got a huge flight coming up soon with my partner and there s loads of TV shows I have on it that we d ideally want to watch and listen to together If only my audio Multiple headphones bluetooth out worked I could just put a headphone splitter into it But I Multiple bluetooth headphones m trying to investigate whether you can get a bluetooth receiver like this http www amazon co uk JUSTOP-BTR -Bluetooth-Wireless-Universal dp B NDDEVQ So that receiver will pick up the audio then pass the audio into something like this http www amazon co uk Belkin-BKF s electronics amp ie UTF amp qid amp sr - Which I can then plug two sets of headphones into and bingo we can both watch and listen to the same thing on my tablet on the plane Would that work Or have I created a ludicrously complicated way of achieving this when a much simpler multi-bluetooth audio out system exists In a nutshell my question is this What s the easiest way get audio to two sets of headphones from one tablet if the audio out plug doesn t work nbsp

A:Multiple bluetooth headphones

I dont think your bluetooth audio adapter is able to drive 2 headphones at reasonable volume level. unless, you get a small headphone amplifier. but then you'll have 3 devices connected and I think it's not worth the hassle. the amplifier itself is cheap, look for something like fiio e3. I have it and it should cost less than 10 bucks.

a single alkaline AAA battery could last for about 10h on my heavy usage. but im not sure if the bluetooth adapter could do the same.

bluetooth adapter -> fiio e3 -> 2way splitter

actually this way, it wouldnt be too much of a hassle. the 3.5mm jack of the bluetooth can be plugged directly into the fiio e3 as well as the 2way splitter.
Relevancy 22.79%

Hello Everyone errors event DNS client I m have a problem on my newer computer that I would like DNS client event errors to know if anyone could give me hand trying to figure out DNS client event errors Now this is not an error that is preventing the computer from working But I get an error in the Event viewer constantly Just makes me think that there is something wrong Error is as follows Log Name System Source Microsoft-Windows-DNS-Client Date AM Event ID Task Category None Level Error Keywords User NETWORK SERVICE Computer Jay-PC Description There was an error while attempting to read the local hosts file Event Xml lt Event xmlns quot http schemas microsoft com win events event quot gt lt System gt lt Provider Name quot Microsoft-Windows-DNS-Client quot Guid quot C E- EEA- A -A FE-A B DDB D quot gt lt EventID gt lt EventID gt lt Version gt lt Version gt lt Level gt lt Level gt lt Task gt lt Task gt lt Opcode gt lt Opcode gt lt Keywords gt x lt Keywords gt lt TimeCreated SystemTime quot - - T Z quot gt lt EventRecordID gt lt EventRecordID gt lt Correlation gt lt Execution ProcessID quot quot ThreadID quot quot gt lt Channel gt System lt Channel gt lt Computer gt Jay-PC lt Computer gt lt Security UserID quot S- - - quot gt lt System gt lt EventData gt lt Data Name quot ErrorCode quot gt lt Data gt lt Data Name quot Location quot gt lt Data gt lt Data Name quot Context quot gt lt Data gt lt EventData gt lt Event gt Like I said earlier If anyone can give me a hand with this I would greatly appreciate it Also Im sorry if I m posting this in the wrong Forum Topic Wasn t sure what sub topic I was supposed to put it under Thanks nbsp

A:DNS client event errors

Easiest approach is to delete the host file
\windows\system32\drivers\etc contains hosts

you need ADMIN privileges
First stop the client by getting a cmd prompt and enter net stop "dns client" (exactly as shown)
now cd to \windows\system32\drivers\etc

del hosts
then recreate it using echo "" >hosts
(that is two consecutive double-quotes without anything between)

now you should clear the event viewer log containing the error and follow up with
net start "dns client"
Relevancy 22.79%

Hi, I just got my USB flash drive yesterday and it works fine with no problems whatsoever. First started using it on a machine with XP with no errors at all but then today on a machine with Windows 7 I get a disk controller error in the even viewer. Please tell me this it not the USB flash drive itself? Thanks

A:USB flash drive errors

No, it is the computer you are running it on, in this case the Win 7. It just means that the disk controller hardware for the Win 7 is not functioning correctly.

Hope this helped

Relevancy 22.36%

If my video card has 1 HDMI port and another port (Not sure which one, DVI or VGA) am I able to hookup two monitors using each of those ports? Or must I have both monitors be connected through HDMI or VGA/DVI?

A:Multiple monitor question

What video card is it? If it's got 2 outputs then it should mean you can just plug one monitor into each.
Relevancy 21.5%

Hi folks I m new here and not greatly technically minded My Acer Aspire Z laptop has been acting strange for a few days running Windows btw Some of the issues are even happening right now ie as I type the cursor will sometimes restart a new line as if I ve pressed the Return button Acer apps is Laptop and and more opens multiple corrupted This is esp bad in emails and Facebook and often the cursor flies down miles Acer Laptop is corrupted and opens multiple apps and more making it a pain to get back to where I was That s not all though There s a horrible beeping noise when I start up the laptop first thing It goes after I press one of the F buttons The worst though is when I try to open up some app on my desktop and sometimes the laptop goes crazy and opens up multiple other apps software There have been instances where there are dozens of the same pages opening I have McAfee Internet Security and have run Malwarebytes and Spybot but problem is still there Is this a hardware problem do Acer Laptop is corrupted and opens multiple apps and more you think I m not great at techie Acer Laptop is corrupted and opens multiple apps and more speak so please go easy with me but I d be grateful for any advice Cheers David nbsp

A:Acer Laptop is corrupted and opens multiple apps and more

UNless someone else has a better idea, how old is this computer & is it still under warranty? If so, I'd get a hold of the where you bought it & get it checked out. IF you don't & have "other" work done on it, it could VOID the warranty.
Relevancy 22.36%

I m just dipping a toe into multi-monitor use and have some questions I using monitors time multiple First have a inch and a inch monitor at the moment have another and to use if need be later I have a ATI card I have both monitors plugged into the video card I ve noticed when I extend the desktop to both screens I have some quot flickering quot on the second inch monitor Almost like its trying to adjust itself to something automatically It only flickers when I scroll the mouse wheel up and down First time using multiple monitors a page or move a window around etc Seems to happen when one screen has a browser at full screen and something might be leaking over to the other screen not sure if I can explain it better than that When I create an eyefinity group even though the monitors are different I see no flickering at all all is well Just wondering if this is some setting on the smaller monitor I need to look into Its a Dell FPV ALSO I am assuming this videocard with two monitors on it may take a performance hit if I use it while gaming For example have the inch be the gamer monitor and have the inch showing the desktop with a browser window or teamspeak on it Also I m looking through my parts here and I have some older video cards I may look into adding one just for the second monitor on the desktop Thoughts nbsp

A:First time using multiple monitors

im no expert but it could be your refresh rate on the second monitor is different from the first so that could be it,

1.go to control panel under appearance and personalization click adjust screen resolution the monitor you want to change advanced setting and monitor tab and change the refresh rate

and your gaming fps should not go down through the multi display set up unless your doing something graphic/cpu demanding task
Relevancy 21.5%

Hello all I multiple monitors for a card video new Purchasing ve been interested in upgrading my work station also gaming station Purchasing a new video card for multiple monitors by investing in multiple monitors I m not looking for more than monitors but I would like to have at least monitors I currently have a monitor that I have plugged into a graphics card that hasn t let me down yet Its connection to the monitor is DVI but I d like all new monitors to use HDMI cables My computer from Dell is an XPS I believe Core i GHz GB RAM Win -bit ATI Radeon HD Money is only part of an issue -- I m open to suggestions on higher-end and lower-end products My questions for you all are What kind of graphics card should I be looking for and should I look into a card that can support multiple monitors and should I use my old one Will there be any conflicts I will need to be aware of while proceeding through this process What would you all recommend for monitor setup What is the best setup for gaming with clear smooth screens Do I need to upgrade any other hardware parts to make this all work together Thank you all in advance A nbsp

A:Purchasing a new video card for multiple monitors

The Radeon 5700 series should support up to 5 monitors. I have not personally used a multi monitor setup for gaming however from what I hear a lot games either arent designed for multimonitor setups or they dont work very well. However, there are some games that are really nice with a multi monitor setup. So you should probably ask yourself what games you are going to be playing and see if those work well with a multi monitor setup. Also, Multi monitor setups require a large display resolution so your videocard will be working overtime. I dont think a 5700 series card will have the oomph to really makes games run smoothly at larger resolutions. So, I dont know what your budget is but I would guess you may have to upgrade your card to something more recent, say a 7800 or 7900 series. I cant comment on Nvidia cards as I am not as familiar with them.
As far as compatibility goes you may need a display port adapter for the third monitor. These are relatively cheap. Also at 525 Watts your power supply barely meets the system requirements for a new card so depending on what else is pulling power in your system you may or may not need a new power supply.

Maybe someone else can chime in with some Nvidia options.
Relevancy 23.22%

Hello I was given an hp pavilion media center m x computer and installed windows xp pro Everything works wonderfully except every power on The BIOS always reports the following New CPU installed Please enter setup to configure your system Press F to enter setup Press F to load default values and continue I have Motherboard m n -am se BIOS Version CPU AMD Athlon X I have changed the bios battery BIOS f2 errors f1 flashed the bios cleared the bios and went back in and reset everything and tried loding the defaults from the bios and loaded optimized settings and the cpu is the one that came with the computer I have no idea as to what to do HELP If anyone knows any thing about tattooing a motherboard you know one BIOS errors f1 f2 of the items you have to put in is the featurebyte The featurebyte is normally blocks of characters plus however this motherboard has blocks of characters plus and when I try to update it every thing is written to the dmi file BIOS errors f1 f2 except the featurebyte which gives an error message that featurebyte has too many characters Please if you know how to take care of the bios error message please help me or if you can help me with the tattooing Thank you nbsp
Relevancy 23.22%

I recently switched from Verizon Fios to Brighthouse Cable time warner internet as I was really not using all the bandwidth I was paying for before Unfortunately I have had nothing but problems in the month since installation After significant troubleshooting I have alleviated several of the internal network issues I had with the new modem but am still having a DNS problem Essentially at seemingly random intervals or immediately if I open bittorrent websites will not connect I reset and renew and dns flush but nothing helps Some programs will stay connected skype dropbox etc and some will not games seem to suffer the same as the web browsing Resetting the modem does not seem to help The diagnostic report through windows troubleshooting says its a problem communicating with the DNS server The router receives dynamic IP and DNS information so I can t change anything there but I put some free dns servers on this computer s list instead of finding Constant DNS errors them automatically This did not help though This leads me to believe this is some networking communications issue not a problem with the DNS servers themselves I disabled DHT in Bittorrent but the problems still occur so I just have stopped using it Oddly enough when I open it on another computer I can still browse the internet on this one though the dns problems do become more frequent even when its open on another computer To emphasize Constant DNS errors the point though the problem occurs at seemingly random intervals regardless of what applications are running I am only noting bittorrent since it seems to trigger the problem very quickly From all of this it seems like there is a problem between the new modem and my network its just two routers with dhcp disabled hooking up wired computers throughout the house I would be very glad for someone elses input on the matter hopefully its a simple setting but could be a defective router or modem I suppose as well Thanks in advance nbsp

A:Constant DNS errors

Do you have the same problems is your pc is plugged directly into the modem?
Relevancy 22.36%

Hello, Long time no speak Paladins.

I'm considering on getting a new UPS for my PCs, specifically the CyberPower CP1350AVRL, either locally or newegg. I'd be running two computers on this unit and for those who uses CyberPower's UPSs, is there a way to manage two computers with it, considering it has both a USB and serial port?

Assuming it does not, Anyone have any ideas how I could emulate this, or have the PC with the datalink to the UPS shutdown the other? Perhaps using an event to invoke the shutdown command to close a remote computer would be the most raw way of doing it, but I'd love to know if there is a more elegant way.

A:Hibernate multiple computers with UPS?

I don't believe there is a "built in" remote function but the script works.

There is also EMCO Remote Shutdown.
Relevancy 22.36%

Perhaps this is more suited for the Windows sub-forum, but I'll try here first.

I have a laptop connected to two different networks (both with internet), one via wifi and one via an ethernet cable. Is it possible in Windows to dictate which network any particular application will use?

For example, I would prefer it if Outlook pulled from one network while my browsers from another.

Thanks for any advice!
Relevancy 22.36%

Hello, this is my first post in a forum ever, haha. So I currently am using OCZ DDR2 PC2_6400 2x2GB of RAM that runs at 2.1Volts according to OCZ's website. And without knowing, I purchased Crucial DDR2 PC2_6400 2x2GB RAM that runs at 1.8Volts according to Crucial's Website. I want to upgrade my computer to have 8GB of RAM but when I added the Crucial RAM, my computer blue screened and now I have to run a system recovery to fix the corrupt sectors. I think the blue screen may be related to the difference in voltage because everything else is the same (minus the manufacturer). Should I set my motherboard to run at a specific voltage? If so, which voltage should I use? I have MSI P6N SLI Platinum mobo.


A:What voltage should I use for multiple RAM?

Update to the Multiple Ram Question

Last night after I ran the system recovery to repair the bad sectors. I booted up with the original configuration of OCZ 2x2GB of RAM there were no issues. I shut down, installed the additional 2x2GB of RAM. Went into BIOS and set Voltage to 1.8 and booted up. It booted up without a problem this time. I'm OK for now, but I don't know if 1.8 is a bad voltage to run at for the OCZ RAM since it's specs are for 2.1 Volts.

Relevancy 22.79%

Occasionally I will get errors in my event viewer when I burn a music dvd or data disc. The errors are, device cdrom has a bad block and nvgts errors. If nvgts is to do with nvidia then what would that have to do with my dvd writer? I noticed after that dvd was made it had a cyclic redundancy check errors on it and it was a brand new disc. Also it gave me crc errors and the same errors in event viewer of cdrom and nvgts when trying to copy the disc contents to the hard drive. What I don't get is what would cause these errors when burning a disc and how did a brand new disc get crc errors? If anyone can help me that would be great. Thank You!

A:Errors when burning discs

Replace it. Asus, LG, Lite-On, Samsung, Plextor, and Pioneer all have DVD-RW optical drives in the $18 to $30 price range. Why put up with a troublesome unit when they are so inexpensive.
Optical drives, DVD-Rw drives wear out quickly... depend on it to fail within a year, and if used a lot it can fail in five months.
Relevancy 22.36%

ok well this is going to sound crazy but here we go i have a ubee cable modem router model number u10c037 out of that i'm going to two linksys wrt54g's to split to all the rooms in my house then in two of the rooms i have linksys befsr41's and finaly in one room i have a net gear wgr614v10 now it works sorta but i keep having to reset them every now and again right now i'm useing all of the down stream routers as switches what i'm asking is why do i have to keep resetting the system and what can i do to keep it from happening if anyone can help me in great detail i would be very happy i think its an ip address problem but not sure

A:Multiple routers 6

Starting from the modem;
isp = = modem --->(WAN port)ROUTER#1​then to have ALL systems on one network, daisy chain from R#1 to the next but
ONLY connect (LAN)-->(LAN) between all the others. Router#1 will now control
al DHCP assignments - - even for any WiFi router in the chain.

This requires that ONLY R#1 have an active DHCP, so each of the others need
to be set to disable DHCP.

1) One-by-one, connect Router#x via wire to a system, use your browser to access the
router default address, login using the user/password for that router, and DISABLE DHCP.

2) Many routers come preconfigured for lan address 192.168.x.1 where x is 0,1, or 2

Every network can never have duplicate IP address and if allowed, will case network failures.

As you disable the DHCP, also set a new default LAN address 10.0.x.1
where X is 1,2,3,... N and use a new X for each one you've fixed.
Thus, if ever they are wired R1(lan)--(wan)R2---(wan)R3---(wan)R4)
the addresses would be>>>
(but you don't want that for routing table reasons)

3) also change the default password for each router.
If your system login password is abcdefg,
you might set the primary router#1 password to abcdefg#1
router#2 to abcdefg#2 and so on.
Relevancy 21.5%

I am interested in starting an online live interactive multiple my I live streaming do run computer? on How for cameras cooking lesson series I want to stream the lessons for - people using a video conferencing program goto meeting VeaMea Cisco Webex not sure which one yet through our laptop I want to have two or three cameras running through my laptop that i can toggle through One would be a wide shot of me and How do I run multiple cameras for live streaming on my computer? the kitchen Another would be a close up of the cutting board to demonstrate cutting techniques and one camera mounted above the stove for when i am cooking I want to be able to change cameras with a click of the mouse during the lesson and then be able to change back Can I hook up or cameras to How do I run multiple cameras for live streaming on my computer? my laptop Intel core i - m with gig ddr and accomplish what i want to do or is there no way in heck that this little laptop is powerful enough I am currently looking at high quality usb HD webcams Any help or guidance would be very much appreciated If this is not the best forum and you know a better one please advise Thanks Willy nbsp

A:How do I run multiple cameras for live streaming on my computer?

Seems nobody has an answer to this question. Can anyone point me in the right direction to get an answer? Anyone, please?
Relevancy 29.67%

I was wondering if any of you had any idea what is going on with my computer In bios it has a whole list of keyboard errors that happen all the time errors mouse errors, disconnects, keyboard on-screen Keyboard When I am typing an quot s quot will type quot sasasasasasasasasasa quot forever a quot w quot will be quot wqwqwqwqwqwqwqwq quot and an quot x quot will type quot xzxzxzxzxzxzxzxz quot infinitely Even If i don t type anything it will repeat quot sasasasasasasasasasasasa quot I ve tried keyboards with the same problem happening and my Keyboard errors, mouse disconnects, on-screen keyboard errors mouse randomly quits working and I have to unplug and replug it for it to work I have formatted my computer twice and still get the same problem so it s not a Keyboard errors, mouse disconnects, on-screen keyboard errors virus It does it even in setup Keyboard errors, mouse disconnects, on-screen keyboard errors Also even more annoying is the windows On-Screen keyboard I have to use to type as it has the SAME problem and even opens random windows and programs with certain letters At first I thought it was my USB controller going out but if it was then how come the windows On-Screen Keyboard still does this Any help would be amazing this is so damn annoying Have any of you heard of this Should I just get a new motherboard since it might be a bad controller of some sort nbsp

A:Keyboard errors, mouse disconnects, on-screen keyboard errors

Have you updated your BIOS and drivers?
Relevancy 21.5%

Micro-Star Int: 880GM-E43 (MS-7596) motherboard
AMD Athlon IIx4 chipset
Current graphics card: ATI Radeon HD4250 (yea, I know)

I want to upgrade the graphics card for multiple monitors (2 min - 3 max). I'm no longer an avid gamer, but want the option as well as multiple monitors.

Dual 23" LCD's

Thanks for the help.

A:Need to upgrade graphics card for multiple monitors

Go for an Nvidia 560TI or a 570, they will both clock down when you disable your second monitor Mugemon is a great utility for this. 560TI = 200, 570 = 275
Relevancy 21.5%

Situation A custom built hand-me-down PC albeit a good few years old now comprising of One getting multiple Problems using one OS's on whilst PC Internet access IDE Drive one partition with Windows XP Home - original installation One SATA Drive four partitions with Windows Vista Home Edition and XP Pro the other two partitions are currently spare - new OS installations Nvidia NF -S V Motherboard - BIOS now up-to-date with all relevant drivers -Wire BT Broadband Problems getting Internet access whilst using multiple OS's on one PC Business Hub Problem bearing in mind I have little knowledge of using multiple volumes and or Networking do s and don t s etc etc - hence the post XP Home on IDE drive will connect to the internet as it always has done via the Ethernet Cable connected to the Router but it does not recognise the Gateways USB cable option yellow exclamation mark in Device Manager - and it won t can t install a driver from any location - Router Installation CD Windows systems Windows up-date etc XP Pro on one of the new partitions on the SATA drive will connect to the internet but ONLY via the USB cable when connected to the Router - it s the opposite to the above problem when booting from that partition i e it does not recognise the Gateways Ethernet connection this time it s a yellow exclamation mark against the Ethernet Controller AND the SM Bus Controller - again neither will find install a driver from any location Vista on the other SATA drive partition works perfectly regardless of how it s connected to the same router i e USB cable or Ethernet - there are no yellow exclamation marks in Device Manager and all hardware and associated drivers are fine and detailed correctly Is it simply an XP thing when using multiple volumes and or partitions with the same router as the problem obviously isn t present when booting from the Vista installation or do I need to set certain parameters somewhere for all OS s to independently recognise all assocaited drivers regardless of connection type It s not a major problem as I can access the intenet regardless of which OS I use but it s a little annoying knowing that I have to use one connection method over another if I boot an XP installation Thanks in advance for any feedback or walk through tips that might help Oh and by the way as strange as it probably sounds yes I would like to have XP Home XP Professional and Vista Home Premium all on the same PC nbsp

A:Problems getting Internet access whilst using multiple OS's on one PC

Virtual Madness said:

Oh, and by the way, as strange as it probably sounds, yes, I would like to have XP Home, XP Professional and Vista Home Premium all on the same PC.Click to expand...

You could just use virtual machines for the other two operating systems -- assuming the hardware can handle the load of a VM (it should if you have Vista running) and you don't need to leverage massive resources for 3D or gaming on the VMs.

Your just tripling the complexities by running 3 host OS' in my honest opinion. While I agree they should all work, you'd only need to tackle one OS if you ran the rest as guests.

Out of idle curiosity why do you need separate XP home and professional versions, as well as Vista anyway?
Relevancy 22.36%

Hi . I have an annoying problem that drives me insane. First of all I am running Windows 7 x32, just to get that out of the way. Second, a lot of public networks keep appearing in my "Network and Sharing Center", and I have no idea why. I have tried to disable the LAN connection and delete the networks one by one, but after I reactivate the LAN Connection they appear again.
I have never encountered this problem, so I really have no resolve for it. You might say that it's not that annoying, but after some get's on your nerves if you are curious like me to know how to resolve this issue :haha:

Have a nice day,

A:Multiple networks appearing out of nowhere

get a command prompt (start->run->cmd) and enter IPCONFIG /ALL >MyTCP.txt

The file MyTCP.txt will then contain all the details of your connections.
If you paste the contents of that file into your followup, we can discuss with more clarity.
Relevancy 22.36%

my HP Pavilion dv is having a start up problem such that the system when trying to start up and power light shows after some seconds say - it tries restarting again and again like a cycle within those seconds range During this time the screen shows nothing black After doing this for like - times it now comes up my Multiple problems in help! please laptop, starting to desktop This is quite embarrasing please I need some help and idea on what to do It sound siezed one day and shows a red x over the speaker icon on the taskbar Multiple problems in my laptop, please help! The Sound Controllers has dissapeared from Device Manager making the system behaves as if there is no Sound Card Hardware attached to the board I ve tried downloading Microsoft UAA to bring out the hardware from board but all the ones I found on internet was for Realtek but mine uses Conexant Audio Device The system runs on Windows -bit OS AMD Turion tm X mobile technology TL- GHz processor How can a screen and flex problem be differentiated since both have similar symptoms Any help to the above problems would be highly appreciated Thanks nbsp
Relevancy 22.79%

I with laptop errors Various Windows 7 own a TOSHIBA Various laptop errors with Windows 7 Satellite C D laptop with Windows and just recently a minor problem arose with it Usually when I hold down the FN key the available functions that correlate with the quot F quot keys appear at the top of the screen However that bar doesn t appear anymore I do know that the FN key still works though because I am able to adjust my computer s volume with it FN lowers it FN raises it I m just not really sure why it only works for volume and no longer causes the pop up to happen Additionally my mouse pad s scrolling feature has seemingly been disabled I discovered this the same time that I realized the FN key was acting up I can t drag my finger along the right side or bottom of the mouse pad to scroll through pages I also just realized that Ctrl Alt Del doesn t prompt the Task Manager to appear I am still able to go to Run- gt taskmgr and it pops up but no combination of my keyboard s Crtl Alt Del will open the Task Manager Ctrl still works however because I am able to open up new tabs in my browser with it Wait I m not done yet hahah this is the last problem I have come across The Shutdown button in my Start Menu doesn t respond I can click on it but nothing happens I can still shut it down by clicking on Hibernate and I m pretty sure that doing Run- gt shutdown -s -t will still work Hopefully I ll be able to find some help here I m sure and hoping that this is just a quick fix in the Control Panel that I m just unaware of I m able to bypass all of these annoyances but I still would rather not have to Thank you everyone P S I ran a full system scan with Norton and McAFee and both said my computer was clean nbsp

A:Various laptop errors with Windows 7

I hope you don't have both Norton and McAfee antivirus installed at the same time... Each of these programs separately, can easily "corrupt" Windows. If you have the option of reloading the OS fresh, I would recommend that you do this. Go with a free temp file cleaner and a free program like Microsoft Security Essentials to protect next time
Relevancy 14.62%

Hello guys......I need your help....I have sony vaio vgn-fs515b and after installing windows 7 i was updating its bios......!!!!

Everything was working fine but in between a blue screen came. It said that your system is shutting down due to some problem and at the end it said:

"Dumping physical memory".

When i restarted my laptop all the light were on but nothing came on screen. I don't know what to do.......Please help me........!!!!

I know this happened because of incomplete upgradation of bios but what should i do not?

A:Sony Vaio VGN-FS515b doesn't start after BSOD

The motherboards bios is corrupt. You may be able to correct this if you can pull the CMOS battery and reconnect it. Otherwise the motherboard will have to be replaced
Relevancy 21.93%

Hello I have what I consider a very basic understanding of networking I work for an IT solutions provider and a restaurant chain which we support needs to fix a PCI compliance issue The network at the location was put in place a year ago with little documentation My goal is to move a DVR device for CCTV system away from the PoS machine because the DVR requires a port open which is not good for PCI compliance if both are behind same router I apologize for ignorance or lack of any details you might need to help me if there s some info I need to dig up I d be happy + to How modem routers multiple use bridged to find it I m in a rough spot trying to fix this This is how they are set up They How to use bridged modem + multiple routers have a bridged modem which is the first thing that the DSL line comes into My impression is that the proper way to use multiple routers with a bridged modem is to have a quot main router quot which will be the director if you will All the other routers should then plug into that main router as opposed to having multiple routers plugged into a bridged modem I ve confirmed that for whatever reason TWO Linksys Firewall Routers are plugged into this bridged modem which is a Netopia Again I apologize but I don t have the model numbers This brings me to my first couple of questions If two routers are plugged into the same bridged modem how would they behave Wouldn t they be fighting for control to be the quot main router quot Is it possible to set up two routers to connect to the same modem if some advanced configuration is made I actually would like to AVOID using a main router with the other routers connected to that if possible One of the routers has desktop PC and a Point of Sale system connected to it Router A if you will the other has some IP phones connected to it Router B Router B always times out when I try to access the console and I ve been told that in order to fix that I need to reset the router The problem is I can t afford to lose all those settings because I don t know how the company who installed IP phones configured that one The reason I mention this is to further stress that I don t want to have to reconfigure the existing routers However even though it times out when I try to access console it will assign me an IP properly I don t know what that really means I made sure to double check the gateway IP for that router is correctly typed into web browser At the moment the routers seem to be somehow working fine even though they are both plugged into a single bridged modem What I would like to do is add a third router that will only have the DVR device plugged into it My guess is that since Router B does have connectivity it gives me an IP and I can connect to internet when plugged into it I should set up this third router Router C plugged into router B and go ahead to configure Router C however is necessary for the DVR to function correct Give Router C a different gateway than the others forward the port that the DVR needs etc Is this a viable solution Some of my concern is that I m getting mixed messages from AT amp T technicians I have talked to Supposedly when there are routers connected to a bridge at least one of them need to have the PPPoE Username Password johndoe att net entered on it In a situation like this does router A and B BOTH need to have PPPoE user pass entered What about Router C Since router C is plugged into router B does that eliminate the need to enter PPPoE info Is it possible to only use the routers in static mode as opposed to PPPoE with user pass For example I just enter the primary and secondary DNS which the ISP uses give all the devices a WAN IP using the block of fixed IPs the ISP gives us Will that eliminate the need to use PPPoE mode with user pass And finally my last question would be In getting this DVR set up on Router C should I just go ahead to connect it to Router B and try using Router C in static mode with all the right numbers or go ahead to use the... Read more

A:How to use bridged modem + multiple routers

One thing I noticed from reading your post was that the problem you are trying to solve (not having the port opened to the DVR on the same network as the PoS) would not be solved by placing router C behind router B. You would still have to open the port on router B to allow it to pass to router C. Wouldn't this be the same as opening the port in router B to allow it to pass to the DVR (if the DVR was connected to router B)?

As far as the issues with AT&T, you can only program the IP addresses that they assign to you in the routers. They should be able to tell you how many IP addresses are assigned to your customer. If you have a router behind another router, only the one connected to the modem would have an IP address from the ISP.
Relevancy 23.22%

Hi My CD burner Sony CRX E developed a problem where to files in the middle of a long burn get corrupted Thinking it might be a hardware problem I installed another CD burner Samsung SW S from a similar computer and tried different brands of blank CDs Sony HP and Phillips The burner program is RecordNow v In case a TSR program was diverting resources I booted with a minimum of startup programs I think - that is another problem disabled McAfee and had no other programs running One other thing might be relevant About weeks ago I had a malware problem that was fixed thank you Broni from Techspot and once booting from CD errors burn safe mode I hit the debug option by mistake Since then the OS choices has a second option that says quot Microsoft Windows Recovery CD burn errors Console do not select this debugger enabled quot I would appreciate your help because I am running out of both ideas and disks to experiment with Guy Dell Dimension XP SP nbsp

A:CD burn errors

Have you tried some different burning software?
Relevancy 21.93%

We've recently removed 2 printers from our network (a Konica and a HP). Whenever any user EXCEPT 'Administrator' logs in now, they get the below "Connect to Printer" error dialog box. I've made sure to remove the printer from Printers and Faxes, and even the drivers in 'Server Properties' (under the File menu in Printers and Faxes). They're all Windows XP SP3 and rebooted after removal of the drivers.

I even tried Bruce Sanderson's cleanup suggestion. To no avail.

Here's how the error dialog box looks:

Connect to Printer
Windows cannot connect to the printer. Either the printer name was typed incorrectly, or the specified printer has lost its connection to the server. For more information, click Help.
OK Help

I took a look at the suggested registry fix at this techspot discussion but I don't think it applies to our problem.

Anything else to try?

A:'Connect to Printer' errors on login after deleting network printers

I think every client with prior access to these printers will need to Delete Printer and as a Domain Admin, you will need to create the delete.script
Relevancy 22.79%

Haf X Asus Rampage III Formula Core I - stock Cooler Master V CPU Cooler kits GB of G SKILL Ripjaws Series GB x GB DDR PC Desktop Memory Model F - CL D- GBRL running in triple channel x Palit GB GTX in SLI Corsair TX watt PSU Windows Pro bit Well first off I m on my second build and I intend to OC My first build was nothing but making sure the Ram was clocked and timed according to specs and unlocking my BE s extra cores On this build all I ve been running is basic tasks and not much gaming on stock settings for several New rig: test stability errors Pre-OC'ing weeks I want to get a moderate overclock ghz on New rig: Pre-OC'ing stability test errors my i - would be nice for starters The overclocking guide I found said to make sure my system was stable at stock I m actually a little bit surprised I hadn t ran prime already When I realized I hadn t even downloaded prime I decided to do so and run it And to my surprise I get an error not mins into the blend test quot FATAL ERROR Rounding was expected less than Hardware failure detected consult stress txt file quot I ve never actually gotten an error from prime because my first build wasn t built for OC ing and pushing the hardware to its limits I m not actually quite sure where to go from here Any advice The blend test of prime says it tests the CPU and some Ram should I start to prepare myself mentally for RMA ing at least one component nbsp

A:New rig: Pre-OC'ing stability test errors

this could be a problem with your ram why you need 24GB is crazy to much of a chance of one of the sticks being bad i would try them all separate and see if you still get the error.
Relevancy 22.36%

I m not even sure where to start Well Gabriel the ArchAngel runs XP professional SP and is comprised of a month old CPU Motherboard PSU and primary HDD The RAM DVD-RW k dial-up modem secondary HHD monitor PS mouse and tower are from KITT and are months old The PS keyboard is years old as I prefer the USA layout over ABNT-II The parts are new because even though KITT was only month old I had the CPU PSU and motherboard fail I think they had failed so young because of my house power and I had not cleaned the Multiple problems intermittent computer during the month warranty as you have to break the warranty seal to clean inside and a few days before it died I had cleaned it - Multiple intermittent problems it was filthy - and forgot the thermal paste Multiple intermittent problems My original power stabilizer had had the grounding prong removed to fit in the wall socket house is Multiple intermittent problems not grounded electrically So when I bought the new parts I upgraded the stabilizer to a electronic line protector that is specifically made for houses that aren t grounded I also upgraded the HDD to replace two IDE drives that were and years old and I had heard noises once in a while for a month which I though was one of them failing but in hind sight may have been the CPU or PSU fan making noise I DO leave the computer on all night to download via my slow k dial-up modem and rarely reboot Usually that only happens when the power goes out once a month or twice a week depending on the time of year Now after just months I m getting some weird things happening After the first power outage - less then two weeks after I got the thing running - it wouldn t output to monitor I had feared I had lost the monitor as well but a third attempt the monitor worked but the HDD s wouldn t register in POST Waited more then minutes and it booted fine Tech said the PSU may have humidity problems and is common here which makes sense since I live meters from the beach and Clark Kent my original US bought Compaq had similar problems for years before he died though he took his second monitor with him Then the next power outage happened and after boot it would go from grey classic view my setting to the blue XP style I didn t make much of it since I thought my settings may not have been saved though the start menu classic setting remained This happens out of three times the power goes The dial-up modem has been lost three times I had to remove the card boot remove the driver boot shutdown cool down replace the card boot then reinstall the driver to get it back At one point I noticed the secondary HHD was having problems It would revert to PIO At one point the mft was corrupted both and I used testdisk to recover the files and reformatted Suspecting that it is failing was damaged when KITT bought the farm I have since used it for minimal storage and have not used it like normal I will copy the video file to the main drive to watch it instead of access the file directly from the HDD for the entire hour or so I noticed a couple lock ups but a reboot fixed them There was also some freaky stuff going with the front audio output I get quot half quot sound Musical instruments and movie background noise worked but vocal talking was very low I could only hear it all if I set the balance to one side L R didn t matter The mono sound came out both speakers ears And sometimes he won t turn off the monitor at the appropriate time if set in power options unless I change the wallpaper I have energy saver disabled in BIOS The past week however I ve had problems with no signal to monitor no keyboard lights blink artifacts I opened it up reseated the front audio wire which fixed my balance problem noticed the south bridge is hot but it has a way smaller heatsink than the northbridge and installed newer intel graphic driver I had artifacts one more time even after the driver install but the second reboot seems to have fixed things A day later I had audio video stutter ... Read more

A:Multiple intermittent problems

First, invest in a good battery backup line conditioning uninterruptible power supply (UPS). Second, each power outage can damage any part of a computer. Some of this damage is immediate, some causes damage over time. The motherboard's bios gets confused or corrupted. hard drive data and the operating system becomes corrupted...

You may be in for another motherboard or power supply change in this case. You will continue to have these problems until you take action to protect the computer and to turn it off and unplug it when you are not using it, until you can get that UPS up and running
Relevancy 14.62%

On one rig I got GTS mb and it works flawlesslly However on another machine I got GTS Not 'oh really. so you GTS it crashes, BSOD, Gainward 250 name freezes... great'? gb which Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it earned the quot Piece Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it of sh t quot sticker The issues are usual for the gb model blue Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it screen restart games freeze crash audio loops inifinitely strange psychodelic colorful lines swarm the monitor cubes of various colors do the same And yes it happens in many games and to many people at least according to what I ve found browsing forums As with other people in my case too the issues happen with Bad Company Assassin s creed GTA etc It appears that the problem is with the nV drivers I ve found somewhere that installing a much older version of nVidia graphic drivers solves the issue but I d rather search for help on what to I ve updated BIOS Chipset Audio Lan DirectX nVidia GPU driver is Event Source nv Event ID Minidump files are bellow The error in the Event Viewer appeared on July th EDIT Forgot to mention tha powa is Thermaltek w Forward thanks Kreinzer nbsp

A:Gainward GTS 250 'oh so great'? Not really. BSOD, crashes, freezes... you name it

If its the 1gb model, just use a 512, you get like .01% less performance. And you could just update to the latest drivers, maybe Nvidia has since fixed the issues.
Relevancy 21.5%

I ve been doing a bit multiple PSU's when GPUs Adding running additional of research lately because I m unsure of the exact upgrade direction I want to take and I ve come up with the idea of using full HD screens along with triple SLI CF but the power requirements in my case would be above the capability of my Corsair HX- Having just spent on that I d rather not even consider replacing it So can a system use a second PSU like any decent PSU or do they need Adding additional PSU's when running multiple GPUs to be built specially for the purpose I was kinda thinking maybe it would be possible to run the system on my Corsair including x GPUs and then run the rd th using another PSU Adding additional PSU's when running multiple GPUs like a w modular thus only using a couple of cables OCZ one or something Besides the space requirements how exactly do you go about doing this e g how would you connect it into the motherboard and is it physically possible Do I need to use a booster thingy PSU like the ones Red uses in his hollodeck instead If so where on earth do you purchase them from in the UK and what are they called Its purely discussion right now I m not tying myself down to any particular idea I d just like to understand all my available paths and answer a couple of questions I m unsure about more than anything nbsp

A:Adding additional PSU's when running multiple GPUs

Leeky said:

Having just spent 117 on that I'd rather not even consider replacing it. So can a system use a second PSU (like any decent PSU), or do they need to be built specially for the purpose?Click to expand...

I'm no expert in PSU's so I wont bull**** you on that, it's my weak spot, but is it possible to use multiple PSU's on one system? Yes. Both in your case? I don't know.
Relevancy 22.36%

Ok so my friends like coming to my place and bring their xbox s and play online together Problem is is that when we all usually or more of us try to play online at the same time joining together then getting in lobbies usually only of us can stay connected to x box live When a couple of us do manage to stay online one of us lags pretty bad We used to have similar problems when we all played on computers too when it was of us it was usually ok but when a th person was online playing things got pretty slow Im using a belkin wireless G router Ghz Multiple bad connection Xboxs, Is it because its not the best router in the world and too many people are playing off the one router Let me know if I should get a new router or what the problem is id like to start having more people over and doing large xbox parties but I cant if we cant get on the internet Also I dont think its because of my internet its self because when im home with just my family we connect Multiple Xboxs, bad connection to xbox live and internet through our computers quickly Thanks let me know nbsp

A:Multiple Xboxs, bad connection

Im thinking i may need a lan switch or whatever? if so can you link some good ones that are cheap?
Relevancy 22.36%

Right this is a bit Multiple problems PC of a wail for help as i am Multiple PC problems building a pc for someone and i am majorly not getting anywhere It was supposed to be a straight swap of my old computer to a new case I decided to get a faster processor supposedly easy enough Anyway during transit the motherboard was fried apparently and now i have found myself having to replace most of the bits I m having multiple problems with the darn thing now Firstly i can t seem to put anything in any of the pci slots as then the pc will load to windows then say windows explorer has encountered a problem and freeze So for the moment i ve resorted to having no extra cards in the case apart from the gpu It wasnt even coming up with an image for ages either until last night when i did something and the image appeared on the monitor celebration So i decided to try and do some more work on it today and now the blasted thing has returned to not showing an image but not bringing up the no signal message either Im stumped Any quick suggestions on what might be the problem Thanks in advance nbsp

A:Multiple PC problems

Is this the same problem as described in this thread?:
Relevancy 22.79%

I just put together an core i7 950 in a MSI X58M Motherboard i connected the psu and hd and dvd burner. i turn on and everything powers up except the monitor. While trouble shooting i found out that I wouldn't get any error codes via beeps. I've trying to figure out how to get the error codes up so i can try and fix whats goin on. any help would be appreciated!! thanks!

p.s im a noob and i apologize of this is an easy fix.

[EDIT] msi motherboard dont always beep. there errors are indicated by the led lights. all my lights are on indicating that the system is booting up. now my only problem is getting the display to work

A:Mobo not reporting errors with no RAM installed

What graphics card did you install? If it has an external PCI-E power connector, is it connected to the PSU? Is the 8 pin ATX 12V connected to the motherboard?

What power supply are you using?
Relevancy 22.36%

I take a lot of pictures and a significant portion of my workflow for processing them involves loading them onto my laptop organizing them into folders burning them onto a blank DVD as a back up and then transferring them to my main computer which I do all my editing on via the DVD I ve been doing this for the past with no problems up until now Starting a day or two whenever getting contents DVD-Rs to Suddenly desktop copying errors of ago I can t seem to copy the contents of any of my burned DVD-Rs to my computer without getting one Suddenly getting errors whenever copying contents of DVD-Rs to desktop of these two error messages Error Copying File or Folder Cannot copy filename The request could not be performed because of an I O device error Click to expand -or- Error Copying File or Folder Cannot copy filename The volume for a file has been externally altered so that the opened file is no longer valid Click to expand The copying process goes smoothly for the first or so gigs out of and the disc spinning can Suddenly getting errors whenever copying contents of DVD-Rs to desktop be heard but then it goes silent and the copying goes much slower eventually stopping entirely and giving me one of those errors I googled both error Suddenly getting errors whenever copying contents of DVD-Rs to desktop messages but couldn t find much that applied to my situation copying files from dvd-rs to a desktop and I m not sure what they mean or what to do about them Any help would be much appreciated Btw OS is Windows XP Pro SP nbsp

A:Suddenly getting errors whenever copying contents of DVD-Rs to desktop

Either the discs/burns are bad or your DVD drive laser is having issues reading the discs. I would suggest trying a different optical drive and see if you have the same issues.
Relevancy 22.79%

I seem to be having a lot of problems with hard drives lately. I have the <windows root>\system 32\hal.dll error. Sometimes I can insert a winxp disk and go then go to the C:> prompt and copy this file from a mem. stick. Sometimes this works fine and then sometimes it won't.

It then has a Kernal load dll type error. I hate to pitch these hard drives if they can be fixed. Is there some type of utility, 'tool' or software that addresses this issue?


A:Hard drive errors

Nothing will repair a damaged drive but you can try and scan for bad sectors which may keep the drive from storing data there. Scan the drive with a diagnostic utility from whoever makes your drive and see if it detects any issues.
Relevancy 14.19%

Hello For the past two weeks my laptop has been beeping It doesn t beep when I first turn the computer on Once I m to the desktop it starts Vista Studio Dell 64 continuous a BSOD with beep and 1536 has to beep and it s VERY inconsistent It may beep every five minutes or every minutes Sometimes it beeps once and other times its beeped two Dell Studio 1536 with Vista 64 has a continuous beep and BSOD or three times fast And occasionally I get the BSOD saying something about quot dumping my physical memory quot On top of that when I load the computer I get an error saying that my Catalyst Control Centre is not working I just assumed all these things were connected A few months ago my hard drive died so I installed a new one I haven t had any issues until the issues I listed above all of which start just a few weeks ago Unfortunately my warranty has expired so Dell s support hasn t been much help So does this sound like the hard drive I installed is creating the issues Any advice is very helpful nbsp

A:Dell Studio 1536 with Vista 64 has a continuous beep and BSOD

Have you checked for crud in your keyboard... any cause for a sticking key, sticking space bar, etc.

Don't see how the hard drive could cause the problem.

Have you looked at all the Dell Beep Codes... They are posted elsewhere on this TechSpot forum... that could give you a starting point.
Relevancy 22.36%

Hello All,
I have two printers that I like to dedicate one of them to print a form that I have in form of PDF, ow can i make that my only printer that would print that one page all the time.
thank you very much .
Relevancy 21.07%

Hi Im trying to improve my home network Currently I have the modem and wireless router setup in my basement with one computer hardwired to the router and multiple laptops spread throughout the house However the laptops at the top of my house do not have good signal My house is wired with ethernet cabling throughout the house and walls to help or Routers Points Access Need with multiple network home setup What Need help to setup home network with multiple Access Points or Routers I want to do is to take advantage of this wiring and setup multiple routers or AP s throughout house not sure about difference Also to even allow some laptops to connect with an ethernet cable rather than wireless I am not sure how to do this currently All the ethernet cableing Need help to setup home network with multiple Access Points or Routers converge in my garage as an unfinished mess see pic I wanted to run a cable from my router to a plug in the wall which would take the signal to my garage I would then need some kind of device like a hub or switch but i am not sure what kind of device I was hoping it would then distribute the signal to the other wires and send it throuought the house I then wanted to connect another device that would like another router or AP in a another part of the house but am unsure what kind of device and how to do so If anyone could help me out it would be much appreciated nbsp

A:Need help to setup home network with multiple Access Points or Routers

With Ethernet wiring available you have some nice choices;
use wires to access remote locations
and place wireless in the room(s) needed
Likely you can just wire to each floor and the garage and then let the wireless be accessed from those locations.

The Modem==>#1Router can control all the DHCP assignments and assuming that you only need four remote locations, you can use a 4-port router. If you need more than four, you will need a Switch, eg
modem==router---switch-- four connections
+---- three more connections
Each port from the router is wired to an Access Point or a WiFi router (doesn't matter so use whatever you have). The trick is
disable the dhcp in each Wifi device
attached the ethernet from #1Router to any LAN slot on the WiFi (leaving its Wan slot empty)
This will place all the WiFi on the same subnet as #1 router and sharing et al works across the board

WiFi setups:
start with just one to get the setup running and then you can use that as a template to
config the others. When performing this task, ALWAYS connect a pc to the Wifi device with a cable!

a) change the SSID to something unique to you but not obviously name, address ,,, (
you could add a suffix to it to identify one from the other

b) set a unique channel on each WiFi router to reduce interferrence.
(if you're using a DSL service, then make sure all phones in the house have a new filter attached)

c) enable encryption (WPA2 or WPA in that order) and set the passphrase (can be the same for all wifi devices)

d) for heaven's sake, change the admin password and save it.
(this will disconnect your PC from the device being configure so don't be shocked)

disconnect from the Wifi device and attempt a wireless connection.
Once this works, you can repeat for each of the others.
Relevancy 21.5%

This is the strangest error I have EVER seen in XP. I find no mention of this phenomenon anywhere on the web so perhaps I am the first? I surely hope not.

I have a Dell laptop with an integrated keyboard (i.e. built-in). Suddenly, and with no good reason, today my keyboard is acting strangely. Some letters I have to hit 3 times before they type. Others twice. And yet others behave as normal. The correct letter will eventually appear but my Lord no one should have to hit any character on the keyboard more than once.

I need this fixed ASAP because I am taking this PC out of the country with me and I have to be productive.


A:Windows XP - Keyboard - some letters I have to type multiple times for them to appear

Laptop keyboard problem

This could be a failing keyboard matrix, fairly simple to order a new one from Dell and fit. Or it could be the keyboard software faulty. A way to check for a failing keyboard, is to plug in a separate keyboard, into a USB socket. If all works well, then the fault is the Laptop's keyboard. Hope that helps, if only to eliminate one possible problem.
Relevancy 22.36%

I don t do a lot of audio stuff with Win but I would like to know this My MB a LanParty board has built-in audio I typically have audio feeds out of it at once - push audio news seminar room audio and maybe some music I understand I can mix these at the sound control panel and I do However I would like to be able to send or of these sources through a separate audio card and to separate amplified speakers Can I do this under Win and say have audio feeds and go out through my LanParty onboard audio to one set of amplified speakers and then send sources and to say a PCI-based or USB-based audio dongle connected to a second pair of speakers Sound quality is NOT an issue These are voice quality for the most part being used in a work setting I appreciate all responses except quot Why quot ones I sound do I can Win 7 64-bit & that? cards - multiple want to because it s Win 7 64-bit & multiple sound cards - can I do that? my first choice of how I want to handle my sounds So please don t ask me quot Why would you want to do that when you can use the Win mixer and a single sound card quot or quot Why are you trying to listen to sources at once quot I just want to know if I can do that and if so how do I assign a sound from a source such as Hotcomm or Citrix GoTo or Adobe Connect to a specific card nbsp
Relevancy 14.62%

So i decided to fire up my brothers computer that he hasnt used for about 2 years and keep running into the bsod with the error about nvlddmkm.sys for my graphics card, the monitor is also blurred as in the colors are distorted and random colors will blurr to the right or the left of where they should be. I can get it to bootup once i go into safe mode and delete the nvlddmkm.sys but when i try and install the latest driver and reboot the same problem and same error pops up. Any advice on how to fix this error? And I was hoping that by installing the newest driver properly that perhaps the blurry screen will clear up, is that just wishfull thinking or could the blurry screen actually be fixed? The computer is running vista 64 with 4g ram and 750w psu. Thanks for the help guys.

A:BSOD video card 8800gtx error: nvlddmkm.sys

as you can imagine nvlddmkm.sys is part of the driver installation so simply deleting it will either cause errors or blue screens. there are a number of things that could be causing this to happen, such as corrupted files, a bad power supply, or even the card itself. the first thing i would advise is to do a clean installation of the display drivers, which requires you to use a piece of software such as Driver Sweeper to completely purge the associated driver files. once this is done, you can restart the computer and proceed to install the drivers normally.

if this fails, you may be looking at corruption in Vista itself or possibly with the motherboard chipset drivers. there's also a slim chance that you need to update DirectX software or frameworks for graphics-based software. if it comes down to having to test the actual hardware, there are limited options. the best way would be to test the card in another computer (preferably one with a different OS) and to test the power supply and RAM if you can. is there any reason in particular that the computer hasn't been used for a couple of years? there's always a possibility that your brother knew to replace something and never did
Relevancy 21.93%

I d posted in another part of techspot about a problem that it finally turned out was a slowly very slowly dying hard disk that I d had as my D drive for data and documents etc on an XP SP system gig memory Pentium GHz Not wanting to again be so vulnerable to losing my data I thought I d try a RAID configuration I went cheap yes in event viewer errors on copies RAID large and often a mistake I know with an Addonics ADSA PCI controller card that supported software RAID Once I got past the bad documentation - the installation guide started with the driver installation then the next step said quot do this part first if you re configuring RAID RAID errors on large copies and in event viewer quot and described a procedure where several things were to be installed BEFORE the card was - things never really got going smoothly I got RAID running and thought that for sake of ease I d just copy my data roughly gigs from the single drive that had it to the new RAID setup The old drive I had relettered to Q and the new array was D this was done before I configured RAID and formatted the new drives So I went to Q and selected all highlighting all top-level files and folders and their subcontents copied then went to D and pasted Every time I tried this within - minutes I d have a BSOD either a kernel stack or a kernel data inpage error The time it seemed to work best I d moved about gigs in some files So is that a problem with the RAID or with Windows and its copy function Obviously I don t typically copy that much data using copy and paste but I ve done it before without problems Ultimately I used an image of my data and restored that image onto D and all worked well And the computer has been stable now for almost hours since all this happened There ve been two exceptions One was that twice on restart XP has launched chkdsk on C my boot drive not the RAIDed data drive The first time this happened I d had to do a force restart after a lockup on a mass copy attempt so I could have accepted this becuase of the abnormal ending The second time though was after a smooth Windows restart that I did when installing some Windows updates a NET service pack that had been pushed to me after I had to install NET as part of the required RAID utility package that came with the controller card Since I m almost never asked to run chkdsk and when I am I usually understand why this bothers me The other is that I have gotten several event viewer errors related to the new RAID array A few were at a time when I had restarted Windows smooth and normal Windows restart and it went to the login screen fine and stayed that way overnight Others have occurred invisible to me when I m on the PC Here s the most recent one Event Type Error Event Source SiSRaid Event Category None Event ID Date Time PM User N A Computer XP Description The device Device Scsi SiSRaid did not respond within the timeout period For more information see Help and Support Center at http go microsoft com fwlink events asp Data f h c a Is this stuff normal Should I be worried Pre-RAID I d go weeks usually but often months with no errors ever in my event viewer nbsp

A:RAID errors on large copies and in event viewer

So I went to Q:\ and selected all (highlighting all top-level files and folders, and their subcontents), copied, then went to D:\ and pasted.Click to expand...

Ouch! The technique of copy/paste is more likely to cause issues than anything else, especially on large size transfers.

Empty the Raid target
Select the top-level-folders
drag-n-drop onto the Raid Drive letter
Relevancy 21.93%

i have an asus g50v vista 64 bit About 15 of the keys produce multiple characters for ex, 'a' produces sda and spacebar produces z0 etc, Device Manager is showing 4 entries under keyboard; 1. keyboard device filter ehome mcir109 keyboard 3.MS ehome mcir keyboard and 4.MS ehome remote control keyboard keys Any help appreciated Thanx Larry

Remove all the keyboard entries in the device manager and reboot, letting Windows reinstall the keyboard driver...[advice from forum]

i posted the above problem a year ago and removed keyboard entries in device manager,as advised worked nicely,,,,exact same problem happening again but removing devices and reboot is doing nothing this time......also my system restore willnot restore..... please help thanx Larry

A:Keyboard multiple characters with 1 keystroke

If you haven't already, can you try another keyboard?
Relevancy 21.5%

my laptop keyboard is on the fritz. when i push the 'w' key wi appears on the screen my space bar has turned into my enter key my z key is now a 'za' key and my up arrow key is now my right arrow key and so on. i reinstalled the drivers and tried reinstalling the bios, i removed all power sources and even went out and purchased a new antivirus program thinking it was a virus but i'm officially stumped. please, please help, before i'm forced to take a sledge hammer to my problem;-)

A:Keyboard issues, multiple letters appearing

You didn't give us the brand and model, but a laptop keyboard can be found for $25 to $50 depending on brand and model and where you buy it... Usully you remove four to six screws from the bottom, unplug the ribbon cable, remove the board and exchange it, then reverse and you have the new keyboard working in less than 15 minutes...
Finding the right keyboard is tricky, but eBay usually has every model available or with a gurgle search
Relevancy 21.5%

Hello For a long time I have used a multiple monitor with a hdmi cable A TV in my room so i can watch cable Multiple problem with monitor HDMI movies from my computer on the TV I also set the TV-monitor to default sound device Multiple monitor problem with HDMI cable so the sound would come from the TV and not the PC speakers Suddenly it just stopped working So i first tried changing the hdmi cable without any luck - then i tried connecting my xbox to the TV to check if the input to the tv was broken but it worked perfectly - then i tried connecting the pc to my pc screen with hdmi Multiple monitor problem with HDMI cable to see if the hdmi output Multiple monitor problem with HDMI cable was broken this worked perfectly - then i got a new TV and it worked ok but with minor problems there are problems When i only have the desktop showing the screen is perfectly still but when i watch a movie there is a little flickering on the screen When using the tv as default playback device for sound it goes on it of for example when listening to music the music plays for seconds then stops for a second or two then repeat Anyone know what the problem might be some settings probably i kinda spend most of my spare time watching film on the tv but this problem keeps stopping me - hope someone has a good answer for me and please write in a language i understand im not a computer expert nbsp
Relevancy 21.5%

OS: Windows XP Pro

I have 3 hard drives all 80GB, two are from Western Dig and one is a Maxtor and 1 DVD attached as follows.

Primary IDE channel with the 80 wire cable set up:

Drive #1 (OS drive) - jumper on Master w Slave Present, end cable location, assigned to C:
Drive #2 (data drive) - jumper on Slave, middle cable location, assigned to D:

Secondary IDE channel with 40 wire cable set up:

Drive #3 (DVD) - jumper on Slave, end cable location, assigned to F:
Drive #4 (data drive) - jumper on Master w Slave Present, middle cable location, assigned to E: and G:

I don't know why the same drive #4 gets assigned to two letters E and G???

How to fix so it is only assigned to one letter???

I am taking my setup info from: in the how to connect IDE drives section

A:Multiple hard drives show up in Explorer

The only question that springs to mind is, "is there a partition on the drive"?
Relevancy 21.07%

I m looking for a little help if someone would be so kind because I m a bit out of my setup network? - real router, server boxes multiple multipe IPs, One normal depth with this I m putting together a small home network well I guess large compared to some where I have three desktops connected to my router by wireless I also have a CentOS Apache ISPConfig server box and a WinServer k IIS server One router, multipe real IPs, multiple server boxes - setup network? box My intention is to connect both of these servers to the router in such a way that each has One router, multipe real IPs, multiple server boxes - setup network? it s own real IP Registered domain names would then be pointed at either the IP of One router, multipe real IPs, multiple server boxes - setup network? the Apache server or the IIS server and so the router would deliver the traffic to the appropriate box according to which IP the domain is pointed at To those ends I ve purchased a block of IP addresses from my ISP Having just called them I ve been instructed that the IP block I ve bought are my internal IP addresses and that once I ve set them up on the router in this way they should work I ve never actually done this before and my networking experience doesn t really stretch past the very basics of home networking and so I have very little idea of what kind of options I need to use to set this up on the router - there are things in there that are more advanced than I understand Could anybody please point me in the right direction nbsp

A:One router, multipe real IPs, multiple server boxes - setup network?

Regular SOHO routers such as a linksys will not let you manage multiple static IP's. You will need an enterprise class VPN/firewall/router such as a Sonicwall to do that. I assume you want one IP for your web server, one for FTP and so on.. all pointing to different servers/nics. I would suggest a Sonicwall Pro 2040 or Pro 3060. I've seen both on ebay (used) for a reasonable price (around $300). Keep in mind these boxes go for about $1500 to $2000 and up (retail). There are other products from other vendors such as Cisco which will be significantly more. You will need a router in bridge mode (or a bridge) between your WAN connection and the Sonicwall. A regular linksys may suffice for this. There may be other solutions to this but this is one.
Relevancy 14.62%

Hello everyone,

I just bought some Hardware to build a new computer from Scratch.

I bought:

1. Asus P5E3 Pro Motherboard (DDR3 RAM DIMMS)
2. PSU Coolmax CUL-750B 750W
3. 2x2GB OCZ OCZ3G10664GK R (DDR3 RAM)
4. VGA Card - ASUS ENGTS250/DI/512MD3
5. Intel Core 2 Quad Q8400 2.66Ghz 1333

I installed Windows 7 x64bit OEM

I am having problems with BSOD (different ones not the same one every time)

I would like to know if its a compatibility Problem with My RAM and Motherboard or could it be something else. I am very bad with Hardware and I just bought parts that I knew could fit in theory.

BIOS is set to default because I don't know how to configure it (Probably thinking why did I buy parts instead of a built computer)

Could you please help?

A:Compatible RAM for Asus P5E3 Pro Motherboard (BSOD)

Your RAM isn't on Asus' memory QVL (Qualified Vendors List)-but that isn't to say that it's not supported.
Having your power supply checked might be an option if your graphics card seems to run slow or you are getting fluctuating performance.
Because OCZ memory modules lack what are called embedded XMP profiles, your motherboard will have difficulty assigning a setting for them so you will need to do it manually.
Download Memtest86+ from here
***under the Memtest86+ v4.00, select "Download -Pre-compiled bootable iso ", save and unzip if downloading the zip file then burn a BOOTABLE CD using ImgBurn or your usual burning software (Nero etc.).- this program runs at BIOS level
Download MemSet here
You can also download CPU-Z -it gives a much simplified version of the RAM timings but you can also access chipset and CPU info. download here

First order of business would be ascertain whether the RAM modules are not defective.
I presume the RAM in question is OCZ's Gold XTC modules - if they are then you can try to manually select the timings- they should be on a sticker on the side of the RAM, which should be 7-7-7-21 ( CAS (or CL)-tRCD-tRP-tRAS) at 1.5 to 1.6 volts.
IF THIS IS NOT YOUR RAM THEN GO NO FURTHER, If it is then you need to set it in order to test it for stability.
Boot into your BIOS. Select the second tab "A.I.Tweaker"
Set PCIE Frequency to 100 (if not already set)
Set DRAM Frequency to DDR3-1066 (if not already set)
Set DRAM Command rate to 2T (if not already set)
Set DRAM Timing Control to Manual
Note the string of timings following "Pri.Information" on the next line-they should be the same as the settings you are about to input.
Set CAS# Frequency to 7 DRAM Clocks
Set RAS# to CAS# Delay to 7 DRAM Clocks
Set RAS# Precharge to 7 DRAM Clocks
Set RAS# Active time to 21 DRAM Clocks
leave the rest of the timings on Auto for now and move down the page until you get to..
DRAM Voltage ....type in 1.60
Hit F10 to save and exit
**If you can boot into windows then run Memset (NOT the Memtest86+ cd you burned!) and note -or better still get a screen capture of the timings (and include in your next post)-here is an example of one of my old screenshots-take no notice of the values but note that both modules SPD (A and B )values are shown-so expand the window.

** If you cannot load Windows then get back to the BIOS and revert settings by choosing Restore Defaults, F10 to save and exit. The likely cause will be insufficient MCH (Northbridge) voltage.
If Memset shows you the correct values and voltage then you can move on to testing.
Reboot and select CD as your first bootable drive
Insert your Memtest86+ bootable cd into the drive
Hit F10 to save and exit
Memtest86+ will boot automatically once the motherboard POST's. As it's a DOS program it is fairly straightforward -The test actually comprises 8 seperate tests. Once all 8 have run then your RAM has completed a "Pass" -for 4Gb a Pass takes around 20-30 minutes.
Run 7 (minimum) to 12 passes. If the testing shows no errors then stop the test at your leisure.
Return to your BIOS, change the boot order back to Harddrive (I assume)
Take the CD out of the drive
F10 to save and exit -congratulations your RAM is stable. The next step would be to stress test the CPU/RAM fo test for stability- but one thing at a time

If the test throws up errors then note the Number of the test and the error code- the test will continue if the errors are not to great. If the testing serquence stops then stop the test, reboot, change boot order, remove cd and F10.
The RAM could fail from either physical damage it has suffered or the timing (and sub-timings) are unstable. We can look into that if the need arises.
Relevancy 22.36%


I am trying to set up my Gateway DX4300-19 Desktop PC for dual monitors. The problem I am having is that the second monitor is not accepting the signal and or not getting the signal. I am not very tech savvy so I may be completely wrong with this so here it goes:

My video card is a ATI Radeon HD 3200 integrated.

So this is how I'm trying to set it up and if I'm completely wrong please tell me what to do.

On the back panel of my desktop there is a VGA output and a HDMI output. I have the VGA going to my desktop Monitor its a gateway.

And Im trying to use the HDMI into my LCD TV as it is hung above my desktop anyway.

Am I doing something wrong or will it just not work?
Relevancy 22.36%

We have Internet service from two providers Fios Comcast Each service includes -Static IP address xxx xxx xxx - yyy yyy yyy - Which connect to our internal LAN xxx I would like to segregate traffic between services so that that Email Static Using IP's Multiple traffic is on a different IP from users accessing the Internet I would also like to have fail-over from the primary fios to secondary comcast I don t need load balancing the Fios connection is plenty fast My plan is to take a -port switch and plug the two Ethernet connections coming from the providers into it From there I ll attach Watchguard Dual WAN Firewall Users accessing the Internet WAN Gateway xxx xxxx xxx WAN Gateway yyy Using Multiple Static IP's yyy yyy Internal configured with fail-over from WAN to from WAN Fios Supplied Router or suitable replacement Email Server Gateway xxx xxx xxx for Email Internal Comcast Supplied Router or suitable replacement Email Server fail-over set in DNS and on the server Gateway yyy yyy yyy Internal My first question is will this work Normally you would have the Internet connection from the provider going Using Multiple Static IP's directly into the router Can I put a switch in between them If so can I attach two Internet connections and three routers all to the same switch Thanks nbsp

A:Using Multiple Static IP's

Scamper said:

We have Internet service from two providers (Fios/Comcast)
Each service includes 5-Static IP address: - 14 (ISP#1 ->router#1)
yyy.yyy.yyy.100-104 (ISP#2 ->router#2)

Which connect to our internal LAN:

I would like to segregate traffic between services, so that that Email traffic is on a different IP from users accessing the Internet.Click to expand...

This is a port forward solution:
for ports 25, 110, & 143 (the emails), port forward each to the lan address that is closes to the specific ISP side desired, eg any lan address on router#2

I would also like to have fail-over from the primary (fios) to secondary (comcast)
(I don't need load balancing, the Fios connection is plenty fast)Click to expand...

fall over is described well here

you may need to multihome each client (which see)

My plan is to take a 16-port switch and plug the two Ethernet connections coming from the providers into it. .....

My first question is, will this work? Normally you would have the Internet connection from the provider going directly into the router.

Can I put a switch in between them?

If so can I attach two Internet connections and three routers all to the same switch?Click to expand...

I'd have to think out the layout and setup ...
Relevancy 23.22%

Hi, when i load my pc up i get the following notification

I go into device manager and check my adapters and notice that they are not working

I am running windows 7 and i read somewhere Intel dont support these with compatible windows 7 drivers?

If thats the case what can i do? and what consequences can this have if both of them are not working?

A:Getting display errors

OK, you just can't stuff last months OS into a 6 year old PC and expect the drivers to be available. There is "Windows 7 Upgrade Advisor", available from M$, which would have told you not to do what you did, (install Win 7).

Now the board you're using has onboard graphics, as well as the Nvidia add-in card.
That has to be plugged into a standard PCI slot. So, how many graphics adapters do you want in the machine...?

Now, you can update the graphics driver from the links I provided in the other thread, or remove the add-in video card and replace it with a better PCI-E card, then install the latest driver for it.

Now, you're starting to ask the same question over and over, expecting a different answer, which is pointless.

With the Mickey Mouse BS you're trying with this old machine, if I were you, I'd be thankful it would still connect to the internet.
Relevancy 22.79%

Whenever I plug in my USB device it wants to "scan and fix" but it still works if I just choose to continue. On the other hand the G drive which is for my SD card gives me errors of corruption. what shall i do about this?

A:SD card drive corrupton errors

Have you not tried reinstalling your flash drivers? im new here so im not very computer minded but thats what i would try first
Relevancy 22.36%

Ok here we go I apologize if I don t give enough info needed to diagnose the problem but I m only a novice It all started when my avast antivirus found a No connection multiple on networks worm coming from system drivers AFD sys I couldn t quarantine the file so No connection on multiple networks I cut it and moved it to another folder Upon restart I have quot limited or No connection on multiple networks no connectivity quot I tried putting the file back but that didn t change anything I m pretty sure this isn t a router issue I have a wired connection running to my router and I also have a wireless card with access to my neighbors unsecured networks No dice on any of them My IP address comes up as When I try to renew it says quot error ocurred RPC server is unavailable quot I also can t start my dhcp client it gives me quot erroe the dependency service does not exist or has been marked for deletion quot The dependency services listed are the normal recommended in most fixes Does anyone have any advice I have XP SP by the way nbsp
Relevancy 21.5%

I have an existing network with Verizon FiOS that has the router built in to the modem We have computers hooked to that network wired wireless I have a server machine that I am using to practice for my MS certification exams I have Windows Server installed It is an Active Directory domain controller with DNS and DHCP multiple routers, clients 1 with 2 server, Network I also have an old laptop with XP Pro Neither of these are on our existing network My goal Network with 2 routers, 1 server, multiple clients is to connect these machines to another router with wireless capabilities turned off and then connect this router to the existing one to provide internet access to the new machines I want the server to operate as DNS and Network with 2 routers, 1 server, multiple clients DHCP I do not want the router s to do it So the existing router FiOS has an IP of and it gives IP s to the machines connected to it This is fine but when I connect the server and XP machines to the new router I want the server to give out IP addresses not the router I also want to be able to join the XP machine to the AD Domain on the server so I can start playing with RIS and assigning permissions and all the other stuff I Network with 2 routers, 1 server, multiple clients need to learn for my exams Existing router Actiontec MI -WR New router Netgear WGR v All computers are XP Pro except for the server and one Windows Ultimate laptop Does anyone know how to do this and make everything work correctly I hope I ve given enough information Thanks in advance for any help nbsp

A:Network with 2 routers, 1 server, multiple clients

You can have domain running in the home with the equipment you have posted above. I did that here myself. You need Windows client OS that supports domain. Pro series does. Server 2003 has NAT feature and can be your router using additional network card. One Card would be labeled WAN and the other would be called LAN. This can be connected to a 5/8/16/24/48-port switch or even add AP to the mix. So it would be modem to Server to external switch. Having the Server with DNS, DHCP and Active Directory active plus the NAT works great. Take some time to get it all working though. For extra SPI hardware firewall I had use one of those belkin wireless turned off wi-fi, DHCP then connected the server LAN to Belkin then back to the switch. This is optional don't have to do this just saying that's how I did it.


Use a wireless router connect only server to and use external switch from the router to your other network devices. This is another way to do with on domain. Doing this way you don't need to install another Nic card in the server box.
Relevancy 22.79%

I'm going to be using Acronis True Image Home 2010 to
burn a image rescue disk, whats the best iso & data software
burner with the least errors.

A:What's The Best ISO & Data CD Burner with The Least Errors?

Something like ImgBurn or Nero etc will be fine. Write errors usually happen from using inferior media and/or too high a burning speed. If you get good quality discs and burn at a slow rate the backup should write ok. I would verify the write if possible after the disc is completed.
Relevancy 33.54%

Last night our second family PC Blue Screened with an 0x4E PFN_LIST_CORRUPT error which is a very strong indicator of corrupted memory.

Memory is Crucial Ballistix PC3200 (DDR 400) in a 4x512 (2 gigs) configuration in a socket 939 system Epox 9NPA+Ultra motherboard.

The specs on this memory are as follows: 2.8 voltage which the motherboard has it set at correctly as well as in 2T. The CAS is a designed 2-2-2-6 but mobo has it set at 3-4-4-8 which is probably due to the 4x512 configuration and 2T

Ran memtest and into the fifth PASS received 212 errors all in Test 5. I saw enough so I tested each stick individually for the minimum Passes of 7 and no errors on any of them even in test 5.

So I reinstalled all four sticks, checked the BIOS settings and ran Memtest again and in the very first PASS I received 20 errors in Test 5.

Any ideas?

A:4 Memory Sticks Installed = Errors; Individually Tested = Zero Errors

maybe i misread your testing method, but could it be a bad dimm?
Relevancy 21.5%

I have Linksys wireless-G broadband router. When surfing the web, while being the only one online at home, internet pages will open almost instantaneous. The pc that i use is directly connected to the router. There is also another pc as well as 2 laptops that connect wirelessly. The internet signal strength is reduced drastically when multiple users are online at the same time. My router is keyed/pass protected and additional unauthorized users is not a problem. I have no idea what kind of signal the router is putting out. I have noticed when playing an online game my latency will go from <100ms and shoot as high as 1.2k-2k. Again ive noticed that latency is high when multiple people are online.

What can i do to troubleshoot this? Is there any way that i can get the signal to boost as more of it is utilized? thx

A:Experiencing high latency with multiple users on router

Is there any way that i can get the signal to boost as more of it is utilized?Click to expand...

the short answer is no.

for a start see

Bandwidth control is difficult with our cheap routers -- the professionals have features
that are seldomly available to home users. Look to see if QoS is supported in your router; if present you *may*
be able to configure it.

You currently have

modem ---- router#1 ---wired system(A)
+ - - - - WiFi (B + C systems)

With that layout, all systems will see all traffic ; system A will see but not process packets from system C.
Not all routers use Switch technology -- see if yours does. If not add a switch

modem ---- router#1 ---(switch*) --- wired system(A)
+ - - - - WiFi (B + C systems)

This will reduce traffic from the router to system(A). Everything attached to the
switch* side will only see its own traffic.

If I were using WiFi, this would be my layout

modem ---- router#1 ---(switch) --- A/P - - - WiFi (B + C systems) wired system(A)
+---- wired system(A)

Here, ALL systems only see their own traffic

In all cases, router#1 provides the initial NAT to allow multiple systems to share the single ISP connection.
Relevancy 21.5%

I have two monitors, and want to play the same game on both simultaneously, and do so without having both monitors show the same image, but rather to have the game be spread out across the two.

Any suggestions on how i could do this, please do not hesitate to send the information my way.

Thank you,
Relevancy 21.93%

I am hoping you guys can help me out here I have been looking at a pc I built for someone it had two matrox Graphics problem Multiple card graphics cards connected to monitors and was working well for a couple of years the spec Multiple Graphics card problem is basically Athlon Multiple Graphics card problem x processor ASUS M V mobo GB memory and was running Windows XP We recently upgraded to Windows bit and have since had problemswith the graphics and the machine freezing After several e-mails with Matrox it seems that the cards we have are no longer supported and Win drivers are not available they suggested upgrading to their latest cards but at a cost of about I looked around and decided that we may be able to use graphics cards of the same type one being PCIex and the other being PCI I bought Geforce GS cards and fitted them this morning the first two went OK and everything worked fine but problems occurred after the third one with problems with freezing and running slow I updated to the latest drivers which at least enabled the pc to boot up fine but still it seems to be slowly and freezing particularly if we try to open several things at once We have ordered some more memory thinking that it may just be running slow with the extra cards but I am not totally convinced that that will cure the problem Have you guys any thoughts nbsp

A:Multiple Graphics card problem

I suspect that W7 is the culprit here and the issue of drivers where it starts. I have had problems with mixing the slots with the same sorts of cards so if you have two 8400GS cards in PCI slots, perhaps try something else in the PCI-e slot?
Adding memory is always a good idea but not part of this fix I think!
Relevancy 22.36%

How can i have more than 2 Monitor plugged into my desktop , i have seen lots of people do that and wonder how ?

A:Multiple Monitors

A video card with two outputs is one method. What's your existing hardware?
Relevancy 23.22%

Hi All I desperately need ask for your help to solve my problems with an Iomega external HDD As 2.0 1 errors USB Iomega HDD GB it is right now I cannot use my brave new storage because 1 GB Iomega USB 2.0 HDD errors it simple does not work the way it is supposed to I 1 GB Iomega USB 2.0 HDD errors hope we can remedy this problem I ve recently purchased an TB Iomega Select Desktop Hard Drive PC Mac that connects with an USB port to my laptop I have formatted the drive to NTFS I have the following issues with the drive A When I m using the drive under Windows XP SP I encounter with the following problems I If I m downloading several files with torrent filesize lt MB and the download destination is the Iomega storage and the download speed is around - Megabytes sec after a some minutes not more than minutes Windows XP pops up the following Delayed Write error message quot Delayed Write Failed Windows was unable to save all the data for the file name of the file you want to save The data has been lost This error may be caused by a failure of your computer hardware or network connection Please try to save this file elsewhere quot Furthermore I cannot access the drive anymore after the error message The drive seems to be recognized but the folders seem to be empty If I restart the PC Windows does not recognize the drive connected The drive is recognized again if I disconnect and reconnect the power supply of the Iomega drive - I have tried disabling caching Windows setting for optimal performance and delayed disk write torrent client setting but no use The error still persists - I have tried using another USB cable but did not make any difference I still get the error message - I have tried all of the USB ports available on my laptop No use - I have connected the drive to an USB Hub DLink -Port Hi-Speed USB Hub but that does not make any difference either II If I m extracting large GB files e g with total commander on the Iomega Drive I get a quot Read Error quot message and the may fail The rest of the error symptoms are the same as described above This error occurs or times from tries Copying large files from the Iomega drive to my laptop s HDD works fine without error B When I m using the drive under Windows x I encounter with the following problems I If I m downloading several files with torrent filesize lt MB and the download destination is the Iomega storage and the download speed is around - Megabytes sec after a some minutes usually not more than minutes Windows hangs The mouse pointer freezes and I cannot do anything with the Operating System so I have to hard reset the computer The Iomega drive is not recognized afterwards and I must replug the power cable just as with A to get the drive recognized again Windows does not always hang up in case of downloading through torrent to the Iomega Drive I ve just seen another kind of error symptom which did not freeze my Operating System however the drive was unaccessible afterwards - quot Error The system cannot find the file specified quot error message from utorrent client during download In this case Windows can see the folders and SOME of my files on the drive but most of the folders are empty even those which have nothing to do with the torrent e g my documents folder The drive cannot be written quot scandisk-ed quot or unmounted files cannot be accessed or transferred not even those visible So the files seem to be there but actually they aren t After pulling out and plugging back the power cord of the storage Windows recognizes the drive and I can access my files The torrent download cannot be resumed not even after a windows restart storage drive power replug It says at the hash check that quot The system cannot find the file specified quot This may happen with completed downloads as well which I have been seeding for hours II Same as described under A I m using a Fujitsu Siemens Amilo L gw laptop Its specs are as follows Processor Manufacturer Intel Processor Type Celeron M... Read more

A:1 GB Iomega USB 2.0 HDD errors

Typically I would guess that the drive isn't getting enough power, but since it is a 1TB drive (and there currently aren't any laptop drives that size) that it is a regular full size external with its own power supply.

So given that, I would download SeaTools for Windows and run the short and long DST on it and see if it passes. You've tried the Windows settings I would have also suggested.
Relevancy 23.22%

Hi For some time at least months I have had occasional and sometimes more frequent NTFS errors on one or more of my hard drives My system is an Asus P AD -E Premium mobo Ghz Intel P single core hyperthreading Gigs DDR Mhz RAM BFG NVidia GeForce GTX MB on PCIE WD GB SATA drive configured as SATA on Intel NTFS errors ICH R - Boot Drive bran-new drive Seagate GB SATA drive configured as SATA on Intel ICH R - Backup drive ea Seagate GB SATA configured as SATA on the SIl - more backup these drives are almost yrs old Windows Ultimate on WD GB partition Windows XP Pro on WD GB partition The error I get is the following The file system structure on the disk is corrupt and unusable Please run the chkdsk utility on the volume lt volume name gt This error began when running Windows XP pro I recently installed Windows keeping XP on another partition same physical disk so I have a dual-boot I still get the errors in Win When it started I had a RAID setup using GB SATA drives on the Intel ICH R controller and had an additional GB SATA drive connected as SATA not RAID on the SIl controller The error was always on NTFS errors the single SATA drive on the SIl Now I have the system configured as standard SATA On the Intel ICH R I have configured SATA NTFS errors as AHCI On this controller I have the WD GB bran-new drive which is the boot drive and the Seagate GB drive that is the same one I originally had on the SIl as SATA when I had the RAID system on the Intel ICH R Since it was the drive on the SIl that was always giving me the errors on the old setup and now I am having the same errors but on the new WD drive but with that same old Seagate drive connected to the same controller that the new WD is connected I am thinking perhaps this old Seagate drive is the trouble But would a problem on one SATA drive cause problems on other drives connected to the same controller The more I think about this the more inclined I am to replace the motherboard The system is nearly yrs old and I would really like to get something faster anyway But before I spend any money on another mobo I would like to know what is going on with this one and whether these errors are caused by a hardware glitch on the mobo the HDD or in my OS What do you think Thanks for any help on this issue FW nbsp

A:NTFS errors

first i would replace the sata cables,
2.) do a low level format on the hd, that is giveing u problems.
3.) if the problem still exist, then it may be the mobo.

Low level software = Free software =
Relevancy 25.8%

I tried to find the link to introduce myself, and couldnt. I am not very technically advanced. My laptop (its an older one with windows xp operating system home) (my new one was stolen and I am quite depressed about it) now this problem.
I am using my sons laptop now.

I do not have any discs but blank ones. Can someone halp me? My computer will not start, it just displays that message, and when i press f8, safe mode and everything comes up but it never does anything

A:Compaq 2700 <Windows root>\system32\ntoskrnl. exe is missing or corrupt

The hard drive (boot drive) is bad or its contents are corrupted. With no discs, you might want to take it to a friend or to a repair shop to have it repaired
Relevancy 21.93%

Hi guys I m new here looks a great forum Hope I can be multiple compatible with p35/g33 Intel monitors? of assistance but right now I need some of my own Intel p35/g33 compatible with multiple monitors? I am running dual monitors on an ATI Radeon and have recently purchased an Nvidia quadro fx to run another monitors So i found out I am having compatability issues as Intel p35/g33 compatible with multiple monitors? the new card is only running x resolution and bit colour it will not allow me to change this My ATI controller now won t Intel p35/g33 compatible with multiple monitors? let me adjust my first monitors and does not pick up the third My chipset is the - intel p g - If i purchase another ATI Radeon will this solve my problem is this chipset capable of running monitors well it s running now one on the nvidia with low colour and res so i m sure it can Will I need to upgrade my power supply Am I damaging the PC if not My board is a Asus P KC if that helps Thanks James nbsp

A:Intel p35/g33 compatible with multiple monitors?

Welcome James,
I would recommend not mixing multiple video cards, so installing another Radeon 7000 is a good idea. Besides, only one video driver would be needed
Relevancy 15.05%


I have a Dell Inspiron 8600 laptop. At the moment, I have no OS running, as I am trying to reformat my computer. In doing so, I received the BSOD message: partmgr.sys - Address F87C04AB base at F87BE000.

Do I need a new hard drive?

Any help is greatly appreciated. Thanks in advance.


A:BSOD message: partmgr.sys

What Windows CD version are you using to boot with and did you set the CD as the first boot device? I could be wrong but maybe you aren't booting correctly.
Relevancy 14.62%

Hey everyone I m back with another problem This time it s in my personal laptop So about weeks ago a friend of mine installed GB RAM into my nv4_disp Help BSOD infinite loop with laptop After a couple of days with the RAM I turned on my laptop and find my screen flashing red Parts of the screen were pixeled red After backing up my files through safe mode I brought the computer to the college tech support They figured Help with nv4_disp infinite loop BSOD it s a driver problem so they updated my video driver Into what I cannot remember The problem randomly appeared and that forced me to format and start fresh So a new problem arose As the title suggested I randomly get the nv disp infinite loop BSOD Sometimes Help with nv4_disp infinite loop BSOD my screen would just freeze and not do anything Sometimes the screen flashes Help with nv4_disp infinite loop BSOD but I can still move my mouse pointer And it hasn t really been too friendly when I open the only two games I have in my computer in an attempt to see how bad the damage is I looked up some solutions online which included uninstalling and reinstalling drivers After a few attempts of that with the update the NVIDIA website provided I rolled back my driver into driver version So here are some things about my computer Model Dell Latitude D System Microsoft Windows XP Professional Service Pack Computer Intel R Core TM Duo CPU t GHz GHz with GB of RAM Driver Details Currently NVIDIA Quadro NVS M Driver Version Personally I wouldn t mind this problem But I have a final project for a class where I need a video presentation and I am using Pinnacle Studio I m not sure if it s just me being retarded and missing a driver to install but I m pretty sure I reinstalled everything after formatting my computer Any help is greatly appreciated If any more information is needed please tell me so I can attempt to provide you with correct information not completely tech savvy for a computer engineering major ironically nbsp

A:Help with nv4_disp infinite loop BSOD

First of all you have to make sure that the 667 memory and the nvidia driver is compatible with your Dell laptops model, and you should use the Nvidia video and chipset driver from Dell and not from the nvidia site. You can up the shared video memory to 256MB maximum
Relevancy 21.5%

Hey everyone,
I have a keyboard (Razer Tarantula) that plugs in via USB. The primary problem I have is that during boot up, my computer does not recognize the keyboard. I believe this is because it plugs in via USB (correct me if I'm wrong). If this is the case, in order for my computer to recognize it, I think I would need to buy an adapter so that I can plug it into the traditional keyboard socket (I forget what it's called).

If I buy/use an adapter, will that have any effect on the functionality of the extra/programmable keys.

Thanks for any insight!

A:Question about USB keyboards with multiple extra key functions

Do you mean your computer doesn't recognize USB until the Windows is running?

If that's the case, then you need to check your BIOS settings. There should be an option to enable USB Legacy Support. This tells your BIOS to support USB until Windows starts.

Now you have the chicken/egg situation as you need to get to the BIOS to change the setting! So either buy an adapter (still useful to have for a couple bucks) or borrow a non-USB keyboard so you can change the setting
Relevancy 21.5%

I have the ASUS M N-E SLI mobo I m using the built-in ethernet plug wired into my router Lately what s been happening is when I turn on the computer the internet won t work I have to right click the network icon in the system tray click network and sharing center click manage network connections right click the one device listed NVIDIA nForce Mbps Ethernet and click properties Then I click configure drivers update drivers and I have to manually install one of the drivers listed One is from Mirosoft and the other from nvidia They are both named NVIDIA nForce Networking Controller Either one works I could install the microsoft one or the nvidia one and they ll both make the internet work but as soon as I restart my computer it does the same thing again What I d like to know is why causing conflict network Multiple issues? drivers it s doing this and if there s a way to remove one or the other of the drivers from my computer My idea is that it doesn t know which driver to use when the computer turns on so it doesn t use either one If I can remove the microsoft one I think it d use the nvidia one Can someone PLEASE help me out it s really becoming annoying Thank you nbsp
Relevancy 15.05%


my system:

gigabyte X48TDQ6 mobo
2X2gb ocz ddr3 1600mhz

my problem:

i have run my system for about a year with q6600 cpu with no problems with this mobo,memory,graphic card.

yesterday i have changed my cpu to qx9650 with the intel stock cpu fan. when i play games after 20 minutes i get bsod and the system reboot even in regular use on desktop.

the cpu temp in idele is about 27 deg. (not seems beacuse overhit)

on bios everythind on standart/auto (no o.c).

i upgrade my bios revision.

the bsod is "not less or equel" something:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.
Locale ID: 1037

Additional information about the problem:
BCCode: a
BCP1: 0000000010000002
BCP2: 000000000000000C
BCP3: 0000000000000000
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

thanx 4 any help.

A:Bsod after replacing cpu

look on the box the CPU came in, or run CPU-z and see what the revision is. If it is an E0 you need BIOS F8D beta to run that CPU. At least that is what Gigabyte is showing for that CPU on the GA-X48-DQ6 mobo. I couldn't find a GA-X48-TDQ6 mobo listed on their site. Typo or wrong region possibly? Also check windows updates. There may be something for that CPU, or maybe you need more than SP1 on your OS? Your BSOD screen by the way is referencing a failure to read paged memory.
Relevancy 14.62%

I came home from a vacation after summer everything was my and Just computer new installed now processor gets BSOD's 955) (X4 already Just installed new processor (X4 955) and now my computer gets BSOD's set up in my computer except that I had sold Just installed new processor (X4 955) and now my computer gets BSOD's the Phenom X before I left which left my computer well CPU-less When I came back I bought a new Phenom X So I installed the processor and the stock heatsink and fan that came with it No I m not overclocking the CPU No I m not doing anything else out of the ordinary I ve had this processor installed for at least a week now My computer will just randomly get the blue screen of doom or death and just restart I NEED TO KNOW HOW TO FIX THIS PROBLEM I can t take this anymore I downloaded a program called BlueScreenView by NirSoft so that I can view the BSOD error codes etc etc So I can tell you exactly what BSOD happened and at what time I just need to know how to fix it The three BSOD s I ve been getting are DRIVER IRQL NOT LESS OR EQUAL x d KERNEL MODE EXCEPTION NOT HANDLED x e and PAGE FAULT IN NONPAGED AREA x HOW CAN I FIX ANY OF THESE nbsp

A:Just installed new processor (X4 955) and now my computer gets BSOD's

Sounds like a bios update might help. Version 2606 appears to be the latest for Vista if you have 32 bit.
Relevancy 22.79%

Anyone any ideas on this -Com router with PCs connected to it neither of the PCs can access the internet despite them both showing messages that the internet connection errors access Internet is running These PCs both have fixed IP addresses although changing them to dynamic makes no difference A ping from the PC to say google com does not respond A ping to the router gateway address and other PCs on the network is fine I can access the router setup through the browser to the gateway IP address and the router diagnostics all show everything working fine - happy happy joy joy The router is connected to the ISP and will ping and resolve google com without error A third PC my laptop which I know works perfectly on my home network also fails to connect to the internet I have not yet reset the router as the client has lost his ADSL account password Grrreat I have not poked about with ports yet but it might be worth doing maybe Any ideas why the PCs cannot access the net nbsp

A:Internet access errors

You are an oldtimer, who knows the ropes... so...
Did it once work, or is this a new install?
Did it work on one PC?
Can you get back to a simpler setup when it did work, and start over from there?
I would start over with one router. Remove all your installed software for that router.
In essence, start over.
You have missed something simple and obvious. You will find it.
Sometimes it is easier and less time consuming to start over than to find and fix, as you know.
Relevancy 14.62%

hi i have been getting random bsod when playing games and sometimes watching videos online says video driver stopped responding sometimes bsod sometimes it recovers says to upgrade drivers which i have doesnt help it has done this with every driver i have installed.

vista home premium
asus p5q pro
ati 4780 512
2/2g corsiar dominator
e 8400 @ 3.00
pc power +cooling 750 w
2/300g vel raptor hd raid o

hers the mini dump please help

A:Random bsod video drivers

Your video card may be over heating
Relevancy 21.93%

I m looking for some help please My computer was giving New of event HDD/XP lots gets stuck errors booting, viewer me lots of BSOD slowed stuck bootups and errors originated New HDD/XP gets stuck booting, lots of event viewer errors from Device Harddisk D in my event viewer My hard drive failed generic long tests and had bad clusters so I got a new hard drive installed it New HDD/XP gets stuck booting, lots of event viewer errors with XP and it was fine for a week Then my computer would boot New HDD/XP gets stuck booting, lots of event viewer errors to a blank screen and wouldn t boot in safe mode So I yesterday reinstalled XP again and now it s staying on the XP loading screen but never actually loading Safe boot got stuck as soon as I went into event viewer I managed to get it to start up normally just now and I am seeing these errors in event viewer -Error event ID The driver detected a controller error on Device Harddisk D -Warning event ID An error was detected on device Device Harddisk D during a paging operation -Error event ID The DHCP Client service depends on the NetBios over Tcpip service which failed to start because of the following error A device attached to the system is not functioning That same error repeats only instead of DHiverCP NetBios it s DNS Client TCP IP Protocol Driver and IPSEC -Error event The following boot-start or system-start driver s failed to load Aavmker AFD AmdK AsIO asuskbnt aswSP aswTdi Fips IPSec MRxSmb NetBIOS NetBT ohci RasAcd Rdbss Tcpip Does this appear to be a hardware issue or is there a problem with the copy of Windows I obtained I m so frustrated I almost want to buy a premade from Dell and forget about it My current system specs Asus M N-SLI Deluxe mobo AMD Athlon X GB Corsair -Pin DDR SDRAM Please help nbsp

A:New HDD/XP gets stuck booting, lots of event viewer errors

It appears that you have a nice system, if you can get it back to normal.
We have to suspect other hardware, since two hard drives have similar symptoms... but you may have copied evil stuff from the one drive to the other. How did you transfer files? Or an infestation.
What did you use to scan your system for virus and spyware infestations?
Have you carefully checked your cables... or even tried replacing them temporarily?
Examine all sockets for dirt and debris, and clean your system thoroughly but carefully.
You may need to rule out some things that do not seem part of the problem... as it may be a long and slow process to figger out where the problem is... I would start, if the drive will work well enough, by running MemTest86 for four hours or seven passes, which ever is longer... or removing half the memory to test the other half, then switching.
We always suspect the cables first. They can fail and look good.
Any defective hardware part can cause problems elsewhere if the conditions are right... so I would begin by making a check list, then trading out everything on the list... video card, modem even if not used, ethernet connection or software, .
I would also try another drive and cable... any other drive, even using the first drive, fully reformatted and reinstalled with Windows and basic software....
Windows will not normally cause these of problem, but if you have scratches or smudges that would make it difficult to read, then you could theoretically introduce errors... unlikely though that is.
You could have an optical drive error that is not seeing the software properly.
But it is also possible that your Asus board, good as it is, has a defect.