Windows Support Forum

Action Center says "Install Your Memory Card Reader Driver

Q: Action Center says "Install Your Memory Card Reader Driver

I got a message from Action Center or the flag. It says to "Install Your Memory Card Reader Driver". I thought it was already installed.

Can someone help me out here on getting it installed or re-installed?

Relevancy 100%
Preferred Solution: Action Center says "Install Your Memory Card Reader Driver

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/directdownload.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Action Center says "Install Your Memory Card Reader Driver

Also, I believe there is a new version out. I went to Acer Support and Drivers and couldn't find a card reader driver.

http://www.eightforums.com/drivers-hardware/69226-action-center-says-install-your-memory-card-reader-driver.html
Relevancy 83.08%

Running Windows pro installed reader it and "Install is but your works driver" card memory sp on Acer Aspire one ZG I don t get it All hardware has always worked after I replaced winXP with win pro on this netbook clean full install from bootable flash drive Then one day "Install your memory card reader driver" but it is installed and works recently all the sudden I have quot other devices quot - of them listed as quot base system device quot and action center is telling me quot install your memory card reader driver quot of course windows update doesn t find drivers Here s the thing my memory card reader works fine both of them and I can use them just fine In fact everything works as it always has so I can t figure out what the heck these quot other devices quot are that "Install your memory card reader driver" but it is installed and works suddenly appeared out of nowhere for no reason When I check device ID s each one has device ID s listed Not sure if all instances of quot base system device quot have the same device ID s listed or not but I am showing you what s under one of them Why would windows action center be telling me install memory card reader drivers if the readers already work and so apparently already have drivers Does anyone have any idea what the heck is going on All my hardware works so how can there be drivers missing This just doesn t make any sense to me nbsp

A:"Install your memory card reader driver" but it is installed and works

https://forums.techguy.org/threads/install-your-memory-card-reader-driver-but-it-is-installed-and-works.1139424/
Relevancy 107.93%

It says that I need to install a video card driver but I have already gotten one, in device manager it says I have ATI Radeon HD 5700 series

A:Install your video card driver in action center

Drivers update, pop over to there website and see if you have the latest one.

http://www.sevenforums.com/graphic-cards/344269-install-your-video-card-driver-action-center.html
Relevancy 90.73%

Hi everyone, I keep getting a message (see screenshot) about a control driver but I have the latest and device manager says I have the latest as well .

It's a Asmedia control driver , I even downloaded a program called "Hardware Identify " one of Tweaking.coms new programs and it says all drivers are A OK .

Any ideas

Thanks

A:(Action center) Install your USB control driver but it is installed.

It might be a problem with Asmedia. I have the same issue now and then about my USB drivers, and I have an Asmedia USB controller, too. All of my drivers are fine, as well, and if I try to install the drivers it says they are already there.

I don't think it's anything to worry about. Just ignore it.

http://www.sevenforums.com/drivers/331511-action-center-install-your-usb-control-driver-but-installed.html
Relevancy 89.44%

Don't know why i am getting this message but there are no drivers to install , all shows everything is OK .

Baffled, any ideas

A:Action center telling me install USB control driver but already instal

Hi Do you have the ASUS Live Update Utility Installed ? ...

I did have a look on the Asus Website .. To see if they have had any recent Drivers Updates ..
They sure do not have any for your USB ..
Only thing they seem to have recent is BIOS Updates ...

http://www.sevenforums.com/drivers/345211-action-center-telling-me-install-usb-control-driver-but-already-instal.html
Relevancy 84.71%

i am using windows 8 i have a driver missing for my memory card reader RT55139/ i am using a lenovo laptop Ive tried updating my driver through updates but it says driver cant be found. does it matter if i don't update this driver and if it is important to be updated where can i find the updates would i have to pay to get the update done or can i find them free

http://www.eightforums.com/drivers-hardware/38874-driver-memory-card-reader.html
Relevancy 84.71%

I am using Windows 8.1
I have found, in my "Maintenance" part of my Control Panel, a message has appeared, informing me that
a Driver, for my Memory Card Reader Driver, is available. When i view the message, the solution for this, is not available. When i go to, "Devices and Printer`s" on my computer, it shows me my computer, but it has a yellow
triangle, with like a black line running down the center of it. At the bottom of that page, where it says, "Status",
it says "Driver is not available".
Can anyone tell me what is going on, and how do i remedy this.
Thank you.
 

A:Memory Card Reader Driver.

Check if you've received this card reader with an optical media (contains driver that needed to installed first on your computer). Try installing the driver first before connecting the card reader. Once the drive is installed, restart your PC and connect the reader back again.

Good luck!!
 

https://forums.techguy.org/threads/memory-card-reader-driver.1153958/
Relevancy 84.71%

I recently installed Windows 8.1 on my HP Pavilion p6130y desktop PC. Everything works great except Windows can't find and install the 15-in-1 memory card reader device. I know the device is connected to the mother board because the light in the card reader comes on when I insert a memory card, but nothing shows up Windows Explorer. Also, I can't find a driver specifically for the card reader on HP's website. Please help, and Thanks!

A:Need Driver for 15-in-1 memory card reader

Welcome to the forum dle1964. Does it show up in device manager with a yellow triangle? If so let it search on line for a driver. If not, going to be a bit harder. Do you know the manufacturer name of the card reader? If yes, see if there are drivers at their site.

http://www.eightforums.com/drivers-hardware/46785-need-driver-15-1-memory-card-reader.html
Relevancy 83.85%

I want to reinstall the driver for my SD memory card reader. If I uninstall it, will it automaticly reinstall itself after I uninstall it?

A:Reinstalling driver for SD memory card reader

Card Reader Driver 5.1.2600.2011.zip - Free software downloads and software reviews - CNET Download.com
Use this if it won't load a generic version.

http://www.vistax64.com/drivers/281229-reinstalling-driver-sd-memory-card-reader.html
Relevancy 80.84%

Hey Guys (and Gals, if any)...

I have upgraded my Vista Ultimate Aspire 9810 to Win 7 Ultimate(32). Everything is fine, so far, except for the 5-in-1 Memory card reader. It only reads up to 2GB. I cannot remember, when I had Vista Ultimate on it, if it read beyond 2GB.

Any ideas!?!?!!

Are there any updated drivers that support beyond 2GB on this Aspire? I hate to add a reader via USB for that only and wastes a port.

Thanks!

A:Aspire 9810 Card Reader driver to read Memory Cards beyond 2GB

If there's a driver for it, it'll be at Acer Europe - Service & Support, Drivers & Utilities, Downloads, Notebook, Aspire 9810.

Try any relating drivers from XP and Vista as well.

It hope this helps.

Oli

http://www.sevenforums.com/drivers/103392-aspire-9810-card-reader-driver-read-memory-cards-beyond-2gb.html
Relevancy 79.98%

Hi,

I purchased one of the new Inspiron 1720 laptops running Vista about 2 weeks ago and only now checked to see if the multiple card reader drive worked and found to my dismay that it doesn't.
When I put an SD card in the drive, the searching for drivers box pops up but it doesn't find anything. I have searched the driver CD that dell supplied with the laptop but still no luck.

When I look in Device manager I get the following error message:

"A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)".

I have tried searching the dell forums to see if anyone else has seen this with their new inspirons but have had no look thus far.

Has anyone else seen this problem?

Thanks,
Conor
 

A:Code 32 error for multiple memory card reader drive - can't find driver

go here and use their online chat...should be able to talk you thru the fix
 

https://forums.techguy.org/threads/code-32-error-for-multiple-memory-card-reader-drive-cant-find-driver.605950/
Relevancy 79.12%

Up until now I've never used the SD Card reader in my laptop but now I want to use it however it's not showing up under My Computer I have downloaded the 'MS Hotfix MemoryCard' listed under Software which only appears for WinXP here Support for NP-R But when I try to install Running as Administrator the command prompt flashes for a second then nothing happens I've tried restarting anyway in case it had installed but my SD card is still not recognised I've also tried running in compatibility mode with WinXP SP and Vista SP - no luck This card reader apparently is SDHC compatible but my card is only GB anyway so its compatible I've done a google search and it seems a lot of people have problems with this Cannot SD Driver in Install for R519 Reader Samsung Card one particular device driver Also Cannot Install Driver for SD Card Reader in Samsung R519 I've looked under Device Manager but I'm not sure where it would be listed though I'm confident its actually not listed at all So what should I try next I'd rather get it working than have to buy an adapter

A:Cannot Install Driver for SD Card Reader in Samsung R519

That MS Hotfix is NOT a driver for your memory card, it's a software patch for XP so it shouldn't apply to Win 7.

A memory card reader will be listed in Device Manager as a USB Host Controller. When a card is inserted into the reader, then the card will be listed as a disk drive in Device Manager.

Is the card you are using formatted? Does anything happen when you insert the card in the slot? You should hear the same sound when the card is inserted or ejected as you do when you connect/disconnect a USB device.

When viewing Device Manager, are there any devices listed showing the yellow exclamation sign indicating an issue?

http://www.sevenforums.com/drivers/221687-cannot-install-driver-sd-card-reader-samsung-r519.html
Relevancy 77.4%

Hello,
I downloaded all the driver for windows 8 by using service tag of my laptop. When I install JMicron Card Reader driver, I always get an error: "Installation fail!" Please tell me to know how do I fix it.
Thanks
the error picture

A:XPS 17 (L702X) - Install JMicron Card Reader driver fail on windows 8

Hello Chinmay,
Before I reinstall it again, I have been in-plug in the SD card and installation successful.
Thank you for your support

http://en.community.dell.com/support-forums/software-os/f/4677/t/19498053
Relevancy 76.11%

Greetings All,

I have two questions and hope experts on the Forum are able to help resolving them.

1) Is there a way to add "Project" (to a second screen) to the Action Center Quick Actions at the bottom of the notification panel. Accidentally, I had deleted this and now not able to add it since it is not listed as one of the Quick Actions options under the Notification & Actions in System Setting.

2) All text sizing customizations (Title Bars, Menus, Messages Boxes, Palette Titles, Toolbars, Icons) as well as Clear Type adjustments are completely lost and reset to default after every "Restart" of the system. This does not occur for "Shut Down" or "Sleep."

Thank you in advance for your valued assistance.

Best,

DM...

http://www.tenforums.com/customization/30840-adding-project-second-screen-action-center-quick-actions.html
Relevancy 76.11%

I use third party software to update and do other system functions so I don't need the Action Center icon nex to the clock, how do I get rid of it?

A:Remove the "action center" icon from the taskbar area near the clock?

The notification area is located on the right side of the taskbar by default, and it contains program icons that provide status and notifications about things like incoming e‑mail, updates, and network connectivity. When you install a new program, you can sometimes add an icon for that program to the notification area.

You can expand the notification area to view hidden icons

New computers often come with icons already in the notification area, and some programs automatically add an icon to the notification area during installation. You can change which icons and notifications appear in the notification area, and for certain special icons (called system icons), you can choose whether they show up at all.

You can change the order of the icons in the notification area, and the order of hidden icons, by dragging them to the position you want.

To remove or hide an icon from the notification area
Click the icon in the notification area and then drag it toward the desktop.

http://www.sevenforums.com/customization/271578-remove-action-center-icon-taskbar-area-near-clock.html
Relevancy 76.11%

My wife has a two month old Lenovo ideapad with Windows We are now getting alerts that the D partition is near full Is this system taking multipul backups of the harddrive C and storing them all What are my best backup Action Center alert disk "Check space" options to have a safe backup but not overloading the D partition I do see in Computer gt System gt Device Manager gt Disk Drives gt D Drive General tab that there are two options at the bottom option one not checked in my case quot Compress this drive to save disk space quot Option two checked quot Allow files on this drive to have contents indexed in addition to file properties quot Would selecting option one solve my problem If this system is saving a snapshot of D over and over it will only be a matter of time when option one will be overcome SO I would think that there has to be a setting that will let partition D delete older backups right Would it be a combination of selecting option one and changing a setting that would enable older backups to be automaticaly removed

A:Action Center "Check backup disk space" alert

Welcome to the forum
If your D drive is made for backup's only, you can delete all files exept the newest one.
But it's advised to make backup's on an external USB drive and change the frequency of backup's to your files and olso for images to your OS.

http://www.sevenforums.com/backup-restore/233071-action-center-check-backup-disk-space-alert.html
Relevancy 76.11%

Dear All,

I have the "Action Center" flag icon always appear in the Windows 7 taskbar, even when there are "No current issues detected".

When I first installed Windows 7 it would only appear if there WERE issues detected, otherwise it would not display at all.

Now I don't know what happened, but it's just THERE constantly.

I know I can choose "Only Show Notifications" in the settings for it, but it's still actually there, only hidden.

The way it was before is that if no issues were detected it would not appear AT ALL.

Anyone know what's causing this/and more importantly how to fix this problem?

Thanks in advance!

quanzaboy

A:How to REMOVE Action Center icon when "No Issues Detected" ???

right click on any empty space on the taskbar
select properties
In the Notification area section of the properties window, click Customize...
Change the behavior of the Action Center icon to "Only Show Notifications"

That should do the trick

http://www.sevenforums.com/general-discussion/155839-how-remove-action-center-icon-when-no-issues-detected.html
Relevancy 76.11%

I'm trying to install ATA on a freshly patched Win R box all patches offered by Windows Update installed I'm running the installation from an elevated command prompt as Administrator The setup fails at completion before rollback is done In the MSIPackage-logfile I find the following ahead of quot return value quot Calling custom action Microsoft Tri Center Deployment Package Actions Microsoft Tri Center Deployment Package Actions CustomActions InstallFinalize InstallFinalize started FirewallActions AddRule succeeded name Microsoft Advanced Threat Analytics Center executableFileName Microsoft Tri Center exe DataCollectorSetActions Uninstall succeeded DataCollectorSetActions Install succeeded DatabaseActions Install succeeded CreateDatabase succeeded centerCertificate created or retreived managementCertificate created or retreived ConfigureCenter succeeded StartService succeeded serviceName ATACenter ConfigureManagement succeeded ChangeIisStatus to Stop succeeded Exception thrown by custom action System Reflection TargetInvocationException Exception has been thrown by the target of an invocation --- gt System NullReferenceException Object reference not set to an instance of an object at Microsoft Tri Center Deployment Package Actions WebActions lt gt c DisplayClass lt StopConflictingWebsites gt b Binding at System Linq Enumerable Any IEnumerable source Func predicate at Microsoft Tri Center Deployment Package Actions WebActions lt gt c DisplayClass lt StopConflictingWebsites gt b Site at MoreLinq MoreEnumerable ForEach IEnumerable source Action action at Microsoft Tri Center Deployment Package Actions WebActions StopConflictingWebsites IPAddress ipAddress at Microsoft Tri Center Deployment Package Actions CustomActions ConfigureManagementWebSite X Certificate managementCertificate Session session at Microsoft installation Fresh by fails action" ATA Center - custom "Exception thrown 1.6 Tri Center Deployment Package Actions CustomActions InstallFinalize Session session --- End of inner exception stack trace --- at System RuntimeMethodHandle InvokeMethod Object target Object arguments Signature sig Boolean constructor at System Reflection RuntimeMethodInfo UnsafeInvokeInternal Object obj Object parameters Object arguments at System Reflection RuntimeMethodInfo Invoke Object obj BindingFlags invokeAttr Binder binder Object parameters CultureInfo culture at Microsoft Deployment WindowsInstaller CustomActionProxy InvokeCustomAction Int sessionHandle String entryPoint IntPtr remotingDelegatePtr CustomAction InstallFinalizeCustomAction returned actual error code Fresh ATA 1.6 Center installation fails - "Exception thrown by custom action" note this may not be accurate if translation happened inside sandbox Action ended InstallFinalizeCustomAction Return value Action ended INSTALL Return value As far as I can see something seems to be acting up with IIS I tried to completely uninstall IIS Fresh ATA 1.6 Center installation fails - "Exception thrown by custom action" and rebooting the server before I tried to install again - but same error occurs Any ideas

https://social.technet.microsoft.com/Forums/en-US/9884b5c7-ec58-4d12-b7c4-c5906a0897eb/fresh-ata-16-center-installation-fails-quotexception-thrown-by-custom-actionquot?forum=mata
Relevancy 75.68%

It's my understanding that Defender scans according to Microsoft's maintenance schedule. But I get a notice in the Action Center that "Windows Defender needs to scan." My last scan occurred 4-5 days ago when I noticed the alert.

Is it possible that since my computer is powered down at bed time that the scheduled scan is skipped (and not started next morning when I power it up?

How often is Defender scheduled to scan?

Thanks for your help!
Al

http://www.tenforums.com/antivirus-firewalls-system-security/56189-why-does-action-center-tell-me-windows-defender-needs-scan.html
Relevancy 75.68%

Hi all, Every few days I keep getting this message in the Notification area of my Desktop :-"Insert Removable Media (Important)Windows backup needs a CD\DVD or USB drive to continue"I insert a CD, Windows backs everything up, and the message disappears.Three days later same things happens again. I have a whole pile of CDs with Windows backup on it.Question: How can I stop this message from reappearing and annoying me ?I already have a System Restore point etc. do I really need the Backup CDs ?Thanks.

https://social.technet.microsoft.com/Forums/en-US/7f2e4835-f603-4d26-bf0e-18663e1b453c/action-center-quotinsert-removable-mediaquot?forum=w7itprogeneral
Relevancy 75.68%

It is so incredibly annoying. When it pops up (i.e. to remind me to backup my system), I can't clear the box. It stays on top of everything until a reboot. Even an end-task on explorer.exe won't get rid of it.

It's happened now on two different PC's running x64 ultimate - so I assume this is a known bug?

A:"Open Action Center" dialog box won't clear

What does this do?
.

http://www.sevenforums.com/general-discussion/80921-open-action-center-dialog-box-wont-clear.html
Relevancy 73.96%

and when I open the Action Center I get the following-- Download and install a missing driver NVIDIA nForce MCP Chipset is missing a driver NVIDIA nForce MCP Chipset is a chipset in your computer To solve this problem follow these steps Tap or click to driver new chipset... Center Windows for Action reporting download the driver from the ASUSTeK Computer Incorporated website Windows Action Center reporting new driver for chipset... Download and extract the driver files Tap or click Save or Save as and then save the file to your desktop If you can t choose where to save the file you ll need to find it and copy it to your desktop Windows Action Center reporting new driver for chipset... When you download files most web browsers save them to the Downloads folder on your computer To extract the contents of the compressed folder press and hold or right-click the folder you saved to the desktop tap or click Extract All and then follow the instructions Double-tap or double-click the extracted folder to view its contents Note If the folder contains a readme file release notes or installation instructions we recommend you read that info before starting the installation Install the driver Windows Action Center reporting new driver for chipset... Tap or click to open Device Manager In Device Manager locate the device you want to update and then double-tap or double-click the device name Tap or click the Driver tab and then tap or click Update Driver Tap or click Browse my computer for driver software Tap or click the Browse button and then locate the folder that contains the driver files Tap or click OK and then tap or click Next Follow the instructions to complete the installation of the driver So I downloaded and the package is for the Vista OS This may or may not mean anything but I'm not seeing any exclamation marks in Device Manager Should I just ignore this alert I did install a new PCI-E USB card and that was when I got this message The USB card is working but I wonder if the updated chipset driver message has anything to do with that

A:Windows Action Center reporting new driver for chipset...

I'm guessing you have Windows Error Reporting enabled on your computer? WER will download suggestions from Microsoft to the Action Center if it finds something on your computer it thinks needs to be fixed.
In any event, it looks like it may have flagged something on your computer and sent you this alert: http://wer.microsoft.com/responses/Response.aspx/15219/en-US/5.1.2600.0.00000000.9.9?SGD=d8a8c9a9-3c4a-48ff-ae43-77abcbe01fa0#here
 
Unless your graphics display is having issues, or your drivers are old, I wouldn't worry too much about it. If anything, go to the nVidia website and download the driver from there.

http://www.bleepingcomputer.com/forums/t/546454/windows-action-center-reporting-new-driver-for-chipset/
Relevancy 73.1%

I can't figure out why i keep getting this message as my driver is already installed. I have tried reinstalling and get the same message , it does look like it's an old driver (2006) but it's the latest on the Asus website.

Thanks for any assistance

Laptop model U56e win 7 64 bit SP1

A:Constant USB control driver message in action center /screenshots

Looks like there is a later Version of the Driver ..
ASUSTeK Computer Inc. -Support- Drivers and Download U56E

http://www.sevenforums.com/drivers/349136-constant-usb-control-driver-message-action-center-screenshots.html
Relevancy 72.67%

Hey all I have a wweeeiiird problem It started with that my screen looked all messed up after booting up once past the win xp logo when Can't card it video resources" "not driver, says manager install enough in ANY device the video card driver kicks in i suppose It looked like horisontal lines all over the Can't install ANY video card driver, it says "not enough resources" in device manager screen not moving frozen and i had to restart Once restarted everything worked fine This happened a few times two or three i think But finally it didnt help to restart so i started up in safe mode and uninstalled my video card I actually removed the card ati radeon pro and put in my old one d prophet just to be sure nothing happened to my expencive radon card Then it worked booting up normally XP found the card and tried to install it It didnt work properly it said So I had a look in the device manager There I found that the AGP bridge to pci or something had one Can't install ANY video card driver, it says "not enough resources" in device manager of those yellow bad-signs on it Two other devices also under quot system devices quot named quot PCI Standard PCI-to-PCI bridge quot had the same yellow sign Looking under properties it says this quot This device cannot find enough free resources that it can use Code If you want to use this device you will need to disable one of the other devices on this system quot I uninstalled the Can't install ANY video card driver, it says "not enough resources" in device manager AGP bridge whatever that one was called so that one isnt in the list of system devices any more Now its just two of the other type I mentioned above I ve tried to find info about this problem by surfing around but I haven t found anything or at least anything that I understand But it seems that I might need to upgrade my bios But i don t know Anywhoo I m SOO tired of surfing and working with no driver to my video card it takes forever to just scroll a webpage So I would be enooormously grateful for any help My specs Windows XP sp ABIT NF AMD MB DDR MHz GB hdd Ati Radeon Pro usually right now kyro II d prophet some cd-burner nbsp

A:Can't install ANY video card driver, it says "not enough resources" in device manager

Hey man

Hey...

Lol, this comes from runnig a Ati card on a Nvidia nForce chipset! no just kidding ...
Anyway seems like you screwed windows up beyond recognition :blackeye: ....]
There is an easy solution and a difficult one..
The easiest way to fix your problem and establish if you don't have any other combinations of problems is:
1) Find a loan hard drive to reinstall a fresh copy of windows with your new display card inside, or plunge right into it and reinstall windows on your current HD... remember to install the nForce drivers before anything else. While you at it remove any other pci cards that might be the cause of your problems.
2) If your PC crashes during the reinstallation you definately have a hardware problem, try your original display card again.
3) If you have two ram modules, remove one, test, swop them, test.
4) If your problem persists after this I recommend testing the card on another pc... if available. It could be a faulty display card...
5) I presume your pc worked fine before the new display cards installation.
6) If the display card works on another pc you have a compatibility issue (very nasty) on your hands, take it to a pc vendor near you to sort it out.

Good luck!....
 

http://www.techspot.com/community/topics/cant-install-any-video-card-driver-it-says-not-enough-resources-in-device-manager.18936/
Relevancy 70.95%

Hello I have a question about SD Card Readers I have one the Realtek Card Reader SD an Reader need Card Does 2.0 Driver? where you insert the SD Card and plug in a USB cable to connect it to the computer Does Does an SD Card Reader need the Realtek 2.0 Card Reader Driver? the SD Card use a USB Root Hub to Does an SD Card Reader need the Realtek 2.0 Card Reader Driver? connect or does it use the Realtek Card Reader My real question is if I had accidentally uninstalled my Realtek Card Reader built into the computer will an SD Card Reader connected by USB be able to read the SD Cards Also is there a way I can prevent SD cards from being read through a reader on my computer without uninstalling a USB Hub Driver Like specifically prevent new Drivers from being installed or prevent new SD Cards from being recognized Such as using a free downloadable tool that someone may know about I have tried going to Devices and Printers right clicking on my PC Device Installation Settings then turning off automatic driver installs After I do that and plug in a new device it still auto installs the drivers and can use it

A:Does an SD Card Reader need the Realtek 2.0 Card Reader Driver?

Disable the driver, through Device Manager.

http://www.sevenforums.com/drivers/344662-does-sd-card-reader-need-realtek-2-0-card-reader-driver.html
Relevancy 69.66%

Hello,
I am trying to set up a game called JumpStart: Haunted Island on my computer.
It works very well in compatibility mode (freezes a few times but I attribute that to the disk being very old and being a bit scuffed).

Here is my problem:
When I try to complete one of the tasks in the game (the pirate/sailing/map one) an error message appears (the one in the title of this thread)

I have used 208 MB used and 2120MB available and memory is 446 MB RAM.

I would DEEPLY appreciate any help on resolving my issue.

Thank you in advance!
.eNVy.
 

Relevancy 68.8%

Action Center on my Win 10 64-bit PC sometimes works correctly and posts messages when an event occurs, e.g. an email being delivered or a USB stick being removed from a port. At other times though, the messages may not be displayed until 10 - 60 minutes after the event.

Also, should displayed messages be retained in Action Center at all? Is there a log?

Can anyone advise?

Thanks.

http://www.tenforums.com/performance-maintenance/62141-action-center-displays-messages-after-action-has-taken-place.html
Relevancy 68.8%

Action Center on my Win 10 64-bit PC sometimes works correctly and posts messages when an event occurs, e.g. an email being delivered or a USB stick being removed from a port. At other times though, the messages may not be displayed until 10 - 60 minutes after the event.

Also, should displayed messages be retained in Action Center at all? Is there a log?

Can anyone advise?

Thanks.

A:Action Center displays messages after the action has taken place

ive had action center issues since the start. most of the times it doesnt say anything and suddenly gives me 15-20x "anniversary update is here" which has to be removed that 15-20x afterwards.

still not working correctly and im banging my head to wall now and then with it

http://www.tenforums.com/general-support/62141-action-center-displays-messages-after-action-has-taken-place.html
Relevancy 67.94%

I have aLexmark memory card reader that I use with my memomry cards for my digital cameras. I just bought a new M 1G FujiFilm xD card. It said on the package that it is compatible with most cameras, and I didn't give it much thought since I have a Fuji camera.

Well, today I put the card in the reader and it won't read the card. Is there a way to chance properties of the reader so it can read it, or do I need a newer memory card reader because of the new "M" thing? If I need a new one, does anyone have any suggestions on which readers work with the newer cards? Thanks
 

Relevancy 67.94%

I have an HPa1612n running media center 2005 and it wont pick up my memory card from the 9 in 1 reader that is part of the pc. It worked fine last night. any ideas?
 

Relevancy 67.94%

Hello I'm running Windows XP SP Alert" Center install Defense" popups, "Malware "Security self I have fake quot Security Center Alert quot popups and quot Security Center quot popups A program called quot Malware Defense quot has also seemed to installed itself onto my computer And I've just noticed porn icons appearing on my desktop It's also disabled my Avira software GMER doesn't seem to run I've clicked on it a couple of times but it doesn't seem to do anything The DDS logs are attached follows Thanks in advance DDS Ver - - - NTFSx Run by zili at on Wed Internet Explorer BrowserJavaVersion Microsoft Windows XP Professional GMT AV AntiVir Desktop On-access scanning disabled Updated AD - F - A-A -FDD C Running Processes C WINDOWS system Ati evxx exe C WINDOWS system svchost -k DcomLaunch svchost exe C WINDOWS System svchost exe -k netsvcs C WINDOWS system svchost exe -k WudfServiceGroup svchost exe svchost exe C WINDOWS system Ati evxx exe C WINDOWS system spoolsv exe C WINDOWS "Security Center Alert" popups, "Malware Defense" self install Explorer EXE C WINDOWS stsystra exe C Program Files CyberLink PowerDVD DX PDVDDXSrv exe C Program Files Google Gmail Notifier gnotify exe C WINDOWS system rundll exe C Program Files ATI Technologies ATI ACE Core-Static MOM exe C Program Files Java jre bin jusched exe C Program Files iTunes iTunesHelper exe C "Security Center Alert" popups, "Malware Defense" self install WINDOWS system ctfmon exe C Program Files Skype Phone Skype exe C PROGRA PANICW POP-UP PSFree exe C DOCUME zili LOCALS Temp settdebugx exe C Program Files GetRight GetRight exe C Program Files ATI Technologies ATI ACE Core-Static ccc exe C DOCUME zili LOCALS Temp wscsvc exe C Program Files Skype Plugin Manager skypePM exe svchost exe C Program Files Common Files Apple Mobile Device Support bin AppleMobileDeviceService exe C Program Files Bonjour mDNSResponder exe svchost exe C Program Files Java jre bin jqs exe C Program Files Common Files Microsoft Shared VS DEBUG MDM EXE C Program Files NetLimiter Monitor nlsvc exe C WINDOWS system svchost exe -k imgsvc C Program Files NetLimiter Monitor NLClient exe C Program Files iPod bin iPodService exe C WINDOWS system wuauclt exe C Program Files Internet Explorer Iexplore exe C Documents and Settings zili Desktop dds scr Pseudo HJT Report uStart Page hxxp www bom gov au products IDN shtml uInternet Connection Wizard ShellNext iexplore uInternet Settings ProxyOverride local BHO Adobe PDF Link Helper df c-e ad- -a -fa c ebdc - c program files common files adobe acrobat activex AcroIEHelperShim dll BHO Skype add-on mastermind bf b-c d - d - a -a f ba c - c program files skype toolbars internet explorer SkypeIEPlugin dll BHO IE to GetRight Helper ff d- a - a-a ef- ba a e - c program files getright xx gr dll BHO C C A-E - b - D - CECB - No File BHO Windows Live Sign-in Helper d - c - abf- ecc- c - c program files common files microsoft shared windows live WindowsLiveLogin dll BHO Google Toolbar Notifier BHO af de - d - -b fa-ce b ad d - c program files google googletoolbarnotifier swg dll BHO IeMonitorBho Class bf e - a - fd -b - b e c - c program files megaupload mega manager MegaIEMn dll BHO Java tm Plug-In SSV Helper dbc -a - b-bc - c c c a - c program files java jre bin jp ssv dll BHO JQSIEStartDetectorImpl Class e e f - ce- c -bc -eabfe f c - c program files java jre lib deploy jqs ie jqs plugin dll TB AAC-C - - E A- E A E - No File TB F ACBB- F- C -A -FF D D CC - No File uRun CTFMON EXE c windows system ctfmon exe uRun Google Update quot c documents and settings zili local settings application data google update GoogleUpdate exe quot c uRun PlayNC Launcher uRun Skype quot c program files skype phone Skype exe quot nosplash minimized uRun PopUpStopperFreeEdition quot c progra panicw pop-up PSFree exe quot uRun settdebugx exe c docume zili locals temp settdebugx exe mRun IMJPMIG quot c windows ime imjp IMJPMIG EXE quot Spoil... Read more

A:"Security Center Alert" popups, "Malware Defense" self install

Let's try this version of gmer.


Download GMER Rootkit Scanner from here to your desktop. Double click the exe file.
If it gives you a warning about rootkit activity and asks if you want to run scan...click on NO, then use the following settings for a more complete scan.



Click the image to enlarge it


In the right panel, you will see several boxes that have been checked. Ensure the following are unchecked Sections
IAT/EAT
Drives/Partition other than Systemdrive (typically C:\)
Show All (don't miss this one)

Then click the Scan button & wait for it to finish.
Once done click on the [Save..] button, and in the File name area, type in "Gmer.txt" or it will save as a .log file which cannot be uploaded to your post.
Save it where you can easily find it, such as your desktop, and attach it in reply.

**Caution**
Rootkit scans often produce false positives. Do NOT take any action on any "<--- ROOKIT" entries

http://www.techsupportforum.com/forums/f284/security-center-alert-popups-malware-defense-self-install-448836.html
Relevancy 67.51%

Greetings,

I have seen this at multiple workplaces. It goes like this:

1) Adobe Reader and Microsoft Office are included on dedicated VDIs and terminal servers/RDS

2) Everything works fine, users are able to open documents without any problems from local server drives as well as mapped network drives and e-mail attachments

3) After some time, the problem starts:

- Users are unable to open Microsoft Office-type files from network drives or e-mail attachments and receive an error that the computer may be out of memory or out of diskspace (even though it clearly isn't!)
- Users are unable to open PDF files getting an access denied message from Adobe Reader



Solution? Completely disable Protected Mode in MSO programs and also in Adobe Reader.

MSO:

Adobe Reader:

Can someone tell me why this spontaneously breaks and just happens? What solution did you apply?
 

https://hardforum.com/threads/terminal-server-rds-adobe-reader-and-mso-protected-mode-out-of-memory-access-denied-messages.1916424/
Relevancy 67.51%

Is there a Win 10 (64-bit) driver for TEAC CA-400 Enhanced 19-1 Card Reader Driver. If so, can you give me a link?

Thanks!

http://en.community.dell.com/support-forums/desktop/f/3514/t/19983317
Relevancy 67.51%

Hi,

I have a "SanDisk Ultra CompactFlash" 4GB card and an internal card reader (HP desktop). When I insert the card into the reader, the green light above the slot turns on as if it recognizes the device, but it doesn't show up. Device Manager says that the driver is installed and working properly, and I have uninstalled it, reinstalled it, and restarted my computer. A system restore isn't really an option because it isn't my computer.

Any idea how I can fix this? Could it matter that I'm not on the Admin account on the computer?

http://www.techsupportforum.com/forums/f217/internal-card-reader-not-recognizing-card-driver-is-working-properly-674442.html
Relevancy 66.65%

I've had no problem with my computer in the past two days, yet I see an action center message today, supposedly from yesterday, warning me that "This problem was caused by the RPC virus, a known computer virus" and no further information.


Since I've gotten no notification from my usual antivirus/antimalware sources, this seems like a scam or a false positive of some sort. Is this something normal or should I be concerned?

A:"RPC Virus virus" message in action center?

Which "Action Center" is providing the alert?

That doesn't really sound like a Microsoft Alert because of the redundancy of the actual alert.

Have you ran your Virus/Malware software and see what comes up?

http://www.sevenforums.com/system-security/312427-rpc-virus-virus-message-action-center.html
Relevancy 66.65%

hi do all digital camera memory cards fit into any card reader? the card that came with my digital camera is by patriot brand and i don't know a lot about this yet so i don't know if it will be compatible with various readers (or, does "size" matter? this one is 256mb storage). thanks for any enlightenment anyone is kind enough to share princi*
 

Relevancy 66.65%

Hello I have a IQ 524 Touchsmart all in one. It came with Windows XP and I've upgraded to windows 7 Professional from my tech guy. My memory card reader is not working. Could someone please help me with this.Thanking you in advance 

http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/memory-card-reader/td-p/5634058
Relevancy 66.65%

I have a GatewaY notebook and since upgrading to Vista the memory card reader doesn't function. It will not show up as a drive when an SD card is inserted. Any ideas on fixing this?
Thanks,
Roger
[email protected]

A:Memory Card Reader

I have a GatewaY notebook and since upgrading to Vista the memory card reader doesn't function. It will not show up as a drive when an SD card is inserted. Any ideas on fixing this? Thanks,[email protected] need the model number of your pc it probably just needs a updated driver but without your model number i wont beable to find it

http://www.bleepingcomputer.com/forums/t/101018/memory-card-reader/
Relevancy 66.65%

My memory card reader dpc-r1 for some reason now won't read any smart media cards can anyone help please. Found the problem, the reader won't work through a usb extention but I dont know why.
 

A:Memory card reader

I found a discussion on this card reader, maybe it will help you.

Card Reader
 

https://forums.techguy.org/threads/memory-card-reader.285712/
Relevancy 66.65%

I have a Gateway laptop that was changed from windows xp to windows Vista. Before the change, I could take the memory card out of my camera and put it in the slot on my laptop and download pictures. After changing to Vista, I put the memory card in the slot and nothing happens. Ive tried everything I know, nothing helps. Any help would be appreciated. Thanks.

A:memory card reader

Hello paul freshour,
Could you give us some system specs, and tell us what you have tried so far, so we don't go over old ground, thanks.
Also, is it showing up in Device Manager ?, does it need specific drivers ?.
Let us know and we will try to help.

http://www.vistax64.com/general-discussion/268636-memory-card-reader.html
Relevancy 66.65%

hi guys

slight problem i hope you can help me with

ive got a pc running windows 7 it came with a memory card reader built in, all worked fine for months.

ive just put my sd card into the slot and nothing happens.... ive tried connecting the camera via a usb lead and still no joy, it does need even show up in my computer.

the only thing ive done recently is installed itunes and had a iphone attached to the pc.... would these cause this problem??

any help would be great really need to upload some pics asap

thanks

A:memory card reader

have you got a slot on your printer you can try.? not much help im afraid but when i recently had an issue with my camera and pc i found my printer read the card and would upload to pc . just a thought!

http://www.sevenforums.com/hardware-devices/88683-memory-card-reader.html
Relevancy 66.22%

I am planning on buying an external memory card reader/writer with hub. Should card readers generally be compliant with all three host controller interfaces--open, universal and enhanced? If not, would a computer compliant with only a universal controller work with a reader having one or other two interfaces--OHCI and EHCI? My computer has the universal controller.
 

https://forums.techguy.org/threads/memory-card-reader-writer.710454/
Relevancy 66.22%

hello,

I did a search (both here and google) for finding this problem but came up overwhelmed and empty. Too many key works I think.

I have an HP laptop dv 9000 series running vista home premium. At one point, about 6 months ago my 5 in 1 memory card reader recognized and would allow me to access my Sony Memory Stick PRO Duo 2GB, 4GB Mark2, and 8GB Mark2 memory cards via a Memory Stick Duo Adapter (MSAC-M2). Now when I try the same method, my computer won't even acknowledge that the card is in the reader. I have checked the HP website and my drivers are up to date. Furthermore, my memory card reader will recognize my SanDisk 2GB, and 4GB SDHC cards just fine.

I get no error message, and even checking in device manager I can't seem to find the sony mem stick at all, even as an unkown device.

Any help would be appreciated, thanks!
 

https://forums.techguy.org/threads/5-in-1-memory-card-reader-pro-duo-absent.798490/
Relevancy 66.22%

I have a Gateway ML6732 running Windows Vista and recently my memory card reader won't recognize anything. It used to work beautifully, and I don't know what's wrong with it now. Does anybody know what drivers would be associated with it? I've checked my device manager and I have a yellow exclamation mark next to my SCSI/RAID Host Controller. I don't know if that has anything to do with my memory card reader, but I can't find an update anywhere. If anyone has any suggestions, they would be greatly appreciated. Thanks
 

A:Memory Card Reader Not Working?

Right click the yellow exclamation mark and update your drivers if the device manager is unable to update drivers which is not often . Then you can go to your own computers website and download all drivers needed put in make,model number and operating system of your computer
 

https://forums.techguy.org/threads/memory-card-reader-not-working.878850/
Relevancy 66.22%

hey everybody .. i have a sony vaio fw21e .I have 2 slots for cards.. 1 for sd cards , and another for magic gate cards from sony .. the sd card works perfectly ..but the magic gate doesnt work . i downloaded from vaio support some drivers .. but i don t have any clue how to install .. there 4 files .(.inf ) (.dll) ,(.sys) and (.dll) no.. executable .. how do i suppose do install these files.. i m using windows 7 ultimate .. 64 bit . .thx

A:memory card reader problem

  
Quote: Originally Posted by santiago89


hey everybody .. i have a sony vaio fw21e .I have 2 slots for cards.. 1 for sd cards , and another for magic gate cards from sony .. the sd card works perfectly ..but the magic gate doesnt work . i downloaded from vaio support some drivers .. but i don t have any clue how to install .. there 4 files .(.inf ) (.dll) ,(.sys) and (.dll) no.. executable .. how do i suppose do install these files.. i m using windows 7 ultimate .. 64 bit . .thx


Hi and welcome

to install drivers with inf files you need to go into search and type device manager. go to the card reader tab find the magic gate device. right click the file>properties>drivers>update driver> point to where the inf and other files are being stored

Let us know if this doesnt help

Ken J

http://www.sevenforums.com/drivers/37956-memory-card-reader-problem.html
Relevancy 66.22%

Memory Card Reader connected via any USB port on my PC running on 32-bit Windows 7 appears as an USB Device in "Device Manager" and as an ICON in "Devices & Printers" but does NOT appear in "My Computer" or "Disk Management" with an assigned driver letter! As such I am not able to access the Card Reader.

I have tried various solutions to similar problems reported by others in this Forum as also other Forums, such as technologynext, social.technet.microsoft etc. but none worked for me!

Can someone please offer me a workable solution? Thanks!
 

Relevancy 66.22%

I Have a Compaq SR1420NX PC Runnning Windows XP. My Memory card reader died, and it needs to be replaced. i Ordered a replacement one from Compaq, and there is a screw go get to after taking off the front panel and the case, and i can NOT get to it. how would i get the card reader out of the system?
 

A:Compaq Memory Card Reader

Hi!!

I just looked on the HP website and here is a link to the Upgrade and Service Manual for this system. It shows you how to remove all the components, face plates and everything!

You will want to download the &#8220;Upgrading and Servicing Guide&#8221;, the 6th one down from the top!

Here is the link:

http://h10025.www1.hp.com/ewfrf/wc/...c=us&docname=c00303967&dlc=en&product=457247&

It&#8217;s actually a really simple task!!!

Thanks&#8230;

Shane
 

https://forums.techguy.org/threads/compaq-memory-card-reader.587667/
Relevancy 66.22%

I have a Dell Inspiron had it for over a year I am always using the memory card slot to import my pictures I use a Gb SD card never even once had a problem Then I didn t use the slot for at least days started up my computer and the quot Safely Remove Hardware quot green guy is up! MESSED Memory Card Reader thing was in the bottom which was wierd because NOTHING was plugged into my computer Not even my power cord was plugged in When I opened it to see what it was I saw quot Ricoh Memory Stick Disk Device quot Not knowing what it was as I ve NEVER seen Ricoh anywhere on my computer after research found out it was the actual reader but I had never seen it before So I stopped this and inserted my card just like normal Normally the Auto Play comes up with CANNON at the top and it just imports my photos and such But when I inserted it this time the green thingy popped up again but Memory Card Reader is MESSED up! no auto play Okay so I can handle this so I went to My Computer and was just open it through Explorer But instead of it saying CANNON it says quot xD-Picture Card F quot So I tried to open it and it says quot Please insert a disc into xD-Picture Card quot and it wont open my pictures I ve tried putting the card into another computer and everything is peachy So as soon as I open the stop hardware thing it says quot Ricoh xD-Picture Card Disk Device quot Well never seen that before either So when I stopped it and removed my card the first one immediately popped back up again Not that the green icon is annoying but it has NEVER been up before unless something was plugged in I ve tried a system restore to a previous date two to be exact tried uninstalling and reinstalling drivers disabling and enabling them from the device manager I m just SOO at a loss here as to why all of a sudden is Ricoh showing up on my computer and not letting me read my card I even tried to reformat the card and still no luck PLEASE SOMEONE HELP ME Thanks sorry so long nbsp

A:Memory Card Reader is MESSED up!

Somone please help me...I'm so at a loss! It is driving me crazy because I need some pictures on this computer. PLEASE! Thanks
 

https://forums.techguy.org/threads/memory-card-reader-is-messed-up.768429/
Relevancy 66.22%

By error, I installed a Fujifilm Memory Card Reader two times. This means that in My Computer I have 2 Removal Disks drives, one in F and one in G.
How do I remove one of them?
 

A:Installed Memory Card reader twice

Well, if the driver has an entry in Install/Remove Programs in control panel, uninstall all of them and start over. If not, uninstall all instances of it in Device Manager, reboot to make sure they're gone, and then install one.
 

https://forums.techguy.org/threads/installed-memory-card-reader-twice.356286/
Relevancy 66.22%

I bought a 6-1 memory bank it is by IOGEAR. It is a card reader.
It installed with no problems but what I don't understand how does it work. There is no icon or program to click on. Its just there. How do you get the info on the card onto your computer?
Im sure if anyone has a card reader this one works the same.

puter hater
 

Relevancy 66.22%

Hey there! I've got a kodak 6 in 1 memory card reader. It's worked fine for a while now. About a week ago we dumped the hard drive, just due to a ton of viruses, etc...So that was said and done, and I re-installed the software for the reader. Before I just had to put my memory stick in and a windows prompt would pop up asking what I wanted to do...This time it didn't. I went to the drivers properties and changed it to prompt when I put it in, and it still didn't. I think I know how to get the pictures the other way, because I can access them...But does anyone know what I can do to get the windows prompt to pop up?

By the way, I'm running xp
 

Relevancy 66.22%

I have a Dell Inspiron 1505 running Windows XP sp3. Machine is equipped with a 6 in 1 memory card reader. Recently, the device has required a restart of the machine after the media is inserted before the machine will recognize the media. Now it seems even this extra step has stopped working.

I have looked in the device manager, but am not certain which device is my card reader. I'm thinking a driver update is needed, but would appreciate any other suggestions.
Scott
 

https://forums.techguy.org/threads/fussy-memory-card-reader.835347/
Relevancy 66.22%

There seems to be a problem with the memory card reader until last weekend it was working perfectly for the cameras I hve memory cards for As soon as I put a card in either gb or gb the following message appeared This card needs formatting nbsp nbsp I didn't format but when I put the card back in the st camera the screen flashed Memory Card Error I then tried the card from my nd camera and the same thing happened message appeared on laptop screen this card needs formatting then when put back into camera Memory Card Error appeared nbsp I find it very hard to believe that it's a coincidence as it's happened with two different Canon digi cameras and two different nbsp cards nbsp Are the cards corrupted now Is the memory card reader faulty and is it the cause nbsp I am very reluctant to put the memory card in from my rd camera into the reader slot as the cost of replacing the other Reader Memory Card Problem two Sandisk Memory Cards will be expensive enough

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Memory-Card-Reader-Problem/td-p/5666069
Relevancy 66.22%

Hello,
I have a memory stick pro duo and someone stuck it in my computers card reader slot without using the adapter thingy to make it fit! :dead: (see example here)

The card has slid all the way to the back of the reader. I did try using a tweezer like most people used to solve their problem, but i bought 3 different sized tweezers and they don't fit because the card has went above the rail that you slide it in.
Any ideas on how to remove it?

If you don't understand what i mean, i can take a picture and attach it. Just ask.


Thank you
 

A:Memory card stuck in reader

Take the picture, but you might have to get some micro tools to take this out. Let me see how close you can take a micro image of what you have to work with...
 

http://www.techspot.com/community/topics/memory-card-stuck-in-reader.85264/
Relevancy 66.22%

Does anyone know if a new memory card sandisk or a reader memory or with card new new virus? new iomega memory card reader writer can new memory card or new reader with virus? come with a virus Or possible a virus put on the memory card from a new digital camera The memory card card reader via usb and camera have never been connected to another computer but my own My system is working fine but I cant figure out for sure how a new folder with zip files suddenly turned up on my desktop I did not unzip the files and KIS did not detect any virus I quarantined the folder but not sure if I should plug the memory card reader into other computers I own or continue to use the memory card I did print some new memory card or new reader with virus? pictures off the memory card using windows picture wizard OR is it possible a coincidence that same day I plugged in new memory card reader writer I picked up a virus from the internet OS is win xp Also can KIS detect a virus if it is in a zipped file thanks for any help nbsp

https://forums.techguy.org/threads/new-memory-card-or-new-reader-with-virus.918185/
Relevancy 66.22%

I have a Memory card reader and on the windows explorer it shows all the card slots as drives.

Is it possible for it to only show the slot that has media in (dare I say, like a mac)?

The same with my optical drives, is it possible to 'hide' them only showing when they have mounted a an item of optical media?

Or is this just pipe dreams, and only the preserve of unix based systems?

A:Memory card reader question

Folder Options

Drives - Hide or Show Empty Drives in Computer Folder

http://www.sevenforums.com/general-discussion/20158-memory-card-reader-question.html
Relevancy 66.22%

I have no idea when this stopped working, but i noticed it yesterday when i went to use it.
The device manager detects a 'unknown device' in the USB controllers list and gives this report 'Windows has stopped this device because it has reported problems. (Code 43)'

A:50-In-1 Memory Card Reader Not Working

The first thing I'd try is updating that particular driver. If no help, I'd delete the driver and let windows discover the device again.

Try this fixit link as well:

Tips for fixing common driver problems

A Guy

http://www.sevenforums.com/hardware-devices/135209-50-1-memory-card-reader-not-working.html
Relevancy 66.22%

Hi, I have a Fujitsu Siemens Scaleo P, it has memory card input on the front..SD/MMC, CF, etc. Time to time they don't work, as in, I put the card in and nothing shows up on XP, and it doesn't show up on My Computer. Now, it's not working at all, it won't read my SD card or my CF card.

Are there any solutions?

Thanks
 

A:Memory Card reader not working

Any feedback...?
 

https://forums.techguy.org/threads/memory-card-reader-not-working.527438/
Relevancy 66.22%

I have a HP Pavilion DV6 Notebook PC , widows 10 .
My memory card reader isn't working. How should I check what the problem is?
 

https://forums.techguy.org/threads/memory-card-reader-not-working.1170327/
Relevancy 66.22%

Hi, I have problem with SD card reader. When I connect card nothing happens for few minutes, then icon appears, but can not be accesed.
I tried reinstalling driver and Live CD Linux, but it's still the same.

A:E7440 Memory Card Reader

Hi, 
I have the same problem, I think it might be BIOS problem. I noticed this problem few days after BIOS update but I'm not sure that update caused problem. My current BIOS is A17.
Update: A18 version fixes problem :)

http://en.community.dell.com/support-forums/laptop/f/3518/t/19963177
Relevancy 66.22%

I have a Sony Cybershot and have lost the cable to transfer pictures to PC making it impossible to use internal memory. I bought a Dynex 5 in 1 memory card reader on the advice of a Best Buy employee. My memory card is a Sandisk pro duo which is supposed to work in the reader. It fits in fine, but I can't get it back out without a pair of hemostats. Any suggestions on a memory card reader for this particular memory card, or does this one really work and I'm just a moron who can't figure it out
 

A:memory card reader nightmare

preemiepower said:


I have a Sony Cybershot and have lost the cable to transfer pictures to PC making it impossible to use internal memory.Click to expand...

To get the internal memory info, you will need a compatible cable. A card reader can not do this.
 

https://forums.techguy.org/threads/memory-card-reader-nightmare.735521/
Relevancy 66.22%

dear sir,

right after I installed sandisk imagemate usb mem card reader the ff problem has occured... please let me know how to fix this cause I have no way of knowing where to start...

its says ....

system file warning:

the following system files has been replaced with older version by a program you recently ran. some window functionality may not run correctly eith this files installed.

please restore this files by running windows setup located on your original window disk to verify your current installation ...

c:\windows\system\winASPI.dll
I really cant understand where to begin and what it means so
please explain in details ... about my pc ,

intell III 550 mhz 256ram win98se msoffice200....
thank you guys in advance I really appreciate your help...
 

A:help : memory card reader installation

Try this:

Start button, run, then type sfc and hit ok....

Choose extract one file from installation disk and type that file name....winaspi.dll

you'll then need your windows installation cd.
 

https://forums.techguy.org/threads/help-memory-card-reader-installation.50920/
Relevancy 66.22%

Hi I want to use the memory card reader on the HP D printer This printer is on a local network shared with a Desktop and a Laptop Printing works OK from either card reader Map HP D7260 memory computer The drivers are up to date I can view the pictures on the memory card but when I try to save to the computer I get an error quot Not set up you need to install device software quot I posted to the HP forums and I was advised to map the shared PC to the shared Printer HP is having a hour quot Experts Day quot and I did get one response The mapping they suggested did not Map HP D7260 memory card reader work for me It was to map lt sharedcomputername gt lt sharedprintername gt I verified the following names with NET VIEW FRANKSPC I used this mapping to letter J FRANKSPC HP Photosmart D series BT - - The mapping program finds FRANKSPC but it cannot find HP Photosmart D series BT - - which is the Map HP D7260 memory card reader shared printer name displayed by NET VIEW Any Suggestions Thanks Frank C

A:Map HP D7260 memory card reader

Hi,
I think that I have made some progress!
Using this path for mapping a device
\\FRANKSPC\HP Photosmart D7200 series BT 12-8-08\Memory_Card
I no longer get
J is not accessible. The system cannot find the drive specified"
Now I get
"The specified network resource or device is no longer available"

When I use I.E to show I P \\192.168.1.115 (the printer I P) I do see a folder for
memory_card (\\192.168.1.115).
Properties > Network tab > Workgroup shows MSHOME

At Control panel > System > Computer name, domain and workgroup setting
Workgroup is = to WORKGROUP.
Is this mismatch in workgroup name causing my problem?
Frank C

http://www.vistax64.com/network-sharing/298043-map-hp-d7260-memory-card-reader.html
Relevancy 66.22%

hey guys, trying to make a SD card be read on the PC it is built into the computer, and when plugged in the light goes red, indicating of course, that something is in there, however no option shows up to change files, we have tried with the lock switch, both ways...and still no luck, it also DOES NOT show up under computer, the pc is running windows 7 home premium.

A:memory card reader issue

From a Microsoft Answers thread:






Quote:
1. Check if the device is getting detected in device manager. Follow the steps to go to device manager
i. Click Start, type devmgmt.msc and press enter.
ii. Search for the name of the device

If the device is not getting detected in device manager, then check if it is hidden device.
i. Click show hidden devices under View
ii. expand all the nods under device manager
iii. There would be many grayed out entries in device manager uninstall all the grayed out entries under all the nods and then restart the computer and plug the external device to the computer and check if it works

2. Install the latest drivers from the manufacturer website and even make sure the driver is compatible with the version of operating system installed on your computer. check if it works
Link: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

Install the driver in Compatibility mode: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

3. Check with any other another SD card if it is getting recognized or detected or you may even check if the same SD card is getting recognized or detected on other computer

Thanks and Regards:
Samhrutha G S - Microsoft Support


Source

Also:

A Secure Digital (SD) card may not be recognized on a Windows 7 based computer.

http://www.sevenforums.com/hardware-devices/246475-memory-card-reader-issue.html
Relevancy 66.22%

Hey guys, so I upgrade to Windows 7 on my HP DV9000t (with intel core 2 duo t5600 processor) laptop recently from XP Media Center Edition. Now, my built-in memory card reader won't work. Does anyone know where I can find the driver for it? or what the issue might be?!

Thanks guys

-Matt

A:HELP Memory Card Reader Not Working

Hello,

Try this driver: Ricoh 5-in-1 Card Reader Driver HP Pavilion dv9000t CTO Notebook PC - HP Customer Care (United States - English)

Good luck!
~JK

http://www.sevenforums.com/drivers/62408-help-memory-card-reader-not-working.html
Relevancy 66.22%

I have a Fujifilm 3800 camera and a DPC-R1 card reader, also made my fujifilm.
The camera has a 128 MB card in it. I successfully installed the card reader and it shows in Device manager. I install the mem card and click on the drive, but am prompted to insert the disk. The card is good since it shows all the pics I took this weekend but I can't get the reader to recognize the card.

Im running XP Pro SP2 and am not aware of a more recent driver for the reader since a websearch turned up nothing.

Any ideas on this problem? I have also tried uninstalling and reinstalling with no results.

Thanks in advance.
 

A:Memory card reader problems

Have a look on Google.

Many users also report that this card will not work with XP, even though Fuji state that it does.

Some do report it works OK, so its probably conflicting with something on some systems - but what...?.
 

https://forums.techguy.org/threads/memory-card-reader-problems.478693/
Relevancy 66.22%

I just put together a new system today with Core 2 Duo & Win 7 pro 64 bit and it is running great but for one small glitch. I put in a cheap 58-in-one (SD, MMC, etc) Vantec internal memory card reader and turns out it isn't compatible. Does anyone know of a specific brand and model that will work with 7?

http://www.techsupportforum.com/forums/f217/need-win-7-internal-memory-card-reader-454977.html
Relevancy 65.79%

I just received a SCM Smart Card Reader/Writer, model SCR201, and it will not start on my computer. I put it in my wife's Gateway, and it works fine. Main difference is she has IE6, and i have IE7. Any help on this one? I already tried installing the driver from the manufacturer, which was of course to no avail. Now it won't let me roll-back to the previous "Windows Driver".
 

A:PCMCIA Smart Card Reader "This device cannot start. (Code 10)"

https://forums.techguy.org/threads/pcmcia-smart-card-reader-this-device-cannot-start-code-10.548453/
Relevancy 65.79%

I have an Asus CM1630 desktop running windows 7, 64 bit. SD card reader works, after adding drive letter, but there is no hardware removal or insertion tone and the is no icon to safely remove the SD card. The SD card works fine when placed in an USB adapter and plugged into the USB port - there is both the tone and the safe to remove... icon present.

For a while I could not get the Drive it(SD card reader) was in to show up. So I labeled it as Drive G: which was the original labeling and it shows up as a removable storage device. Any solutions out there?

A:SD card reader works but no "removal of hardware" sound or icon

If you were to use the safely remove hardware function on the card reader, it would uninstall the reader itself.

Right click on the Card drive letter in Explorer (My Computer) and select eject.

http://www.sevenforums.com/hardware-devices/355106-sd-card-reader-works-but-no-removal-hardware-sound-icon.html
Relevancy 65.36%

hiyall

do i physicaly instal front panel card reader and a usb 2 x4 pci card before 1st boot of bios and before new install of win 7 64 , or after ?
please and thanks
 

A:Install front panel card reader and a USB 2x4 PCI card before first boot?

Before. Did you get a driver(s) CD with the card reader?
 

http://www.techspot.com/community/topics/install-front-panel-card-reader-and-a-usb-2x4-pci-card-before-first-boot.175140/
Relevancy 65.36%

I have a Compaq Presario SR1710NX with a 9 in 1 memory card reader which my computer cannot reinstall. I can't find the drivers for this device. It is connected to the proper USB pins on my system board.

Can anyone give me a direct link to the drivers for this model? HP doesn't offer them on their website. I don't have the recover disk.

Thanks.
 

A:9 in 1 Memory Card Reader Drivers needed

Dylan2aT said:


I have a Compaq Presario SR1710NX with a 9 in 1 memory card reader which my computer cannot reinstall. I can't find the drivers for this device. It is connected to the proper USB pins on my system board.

Can anyone give me a direct link to the drivers for this model? HP doesn't offer them on their website. I don't have the recover disk.

Thanks.

Click to expand...

Look around here for something:
http://www.google.com/search?q=Comp...s=org.mozilla:en-US:official&client=firefox-a
 

https://forums.techguy.org/threads/9-in-1-memory-card-reader-drivers-needed.829423/
Relevancy 65.36%

Hi -- I just purchased the Lenovo Ideacentre AIO 910. It says it comes with a 3 in 1 media card reader; however, the slot is much too small for me to insert a typical SD card. Am I missing something? Thanks.

https://forums.lenovo.com/t5/Lenovo-A-B-C-N-S-Flex-Horizon/Memory-Card-Reader-on-the-Lenovo-Ideacentre-AIO-910/td-p/3472827
Relevancy 65.36%

i have a dell inspiron 1564 laptop and for some reason the card reader that is in-built has stopped working. at first it put me to a blue screen then shut down but now when i push the stick in it does not even recognise it. i would be most greatful for any help on this matter
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3892 Mb
Graphics Card: Intel(R) Graphics Media Accelerator HD, 1722 Mb
Hard Drives: C: Total - 59999 MB, Free - 22042 MB; D: Total - 406836 MB, Free - 405726 MB;
Motherboard: Dell Inc., 08CNC9, A01, .4Q2XXK1.CN486439C92222.
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

Relevancy 65.36%

i have recently updated to windows 10 on  my presario cq57 and now the card reader will not recognise any sd card. Can't find where to update drivers.

A:have updated to windows 10 and now memory card reader will n...

Hi: The only suggestion I can offer would be to try the W10 Realtek card reader driver directly from Realtek. Download, unzip and run the setup application file from the first driver on the webpage below... http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...

http://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/have-updated-to-windows-10-and-now-memory-card-reader-will/td-p/5727438
Relevancy 65.36%

I have plugged the internal memory card reader into my computer in the correct slot, in one of my 5 JUSB slot's and the computer recognizes it, but it will not detect that there is a card plugged in. Very odd. Any suggestions?

Thanks everyone! And Merry Christmas!

Salt
 

A:Internal Memory Card reader won't work

Is XP updated to Service Pack 3? Have you tried temporarily connecting the card reader to another USB connector?
 

http://www.techspot.com/community/topics/internal-memory-card-reader-wont-work.118408/
Relevancy 65.36%

I have just tried to put on some pictures on my Acer laptop.

The memory card reader is not being recognised by the Windows 7. Never had any problem with XP.

Have also tried connecting direct by cable from the camera. Also not recognised.

Can anyone kindly assist without being too complicated.
 

Relevancy 65.36%

First time using memory card reader. I have been using reader to transfer
pictures to memory card/sddisk for digital picture frames. I got through
1 set of pictures, now when I try it keeps saying (cannot copy) the directory or file cannot be created. what is happening? thanks
 

A:Transfer pictures to memory card in reader

Card is full or locked.
 

http://www.techspot.com/community/topics/transfer-pictures-to-memory-card-in-reader.95737/
Relevancy 65.36%

When I insert a memory card (SD & CF) in the reader of my new Dell Vista PC the "Autoplay" window does not appear. However, the media reader can be accessed in My Computer (and it works), just no Autoplay. Autoplay does work for other devices on my system (DVD, USB disk) but not the reader. I have tried another memory card reader with the same result. Also, I do know that the Autoplay config in Control Panel is configured correct.

Any guidance would be appreciated. This is driving me crazy!

Thanks
Bill
 

A:No Vista Autoplay with USB Memory Card Reader

I found this for XP but it still may solve your problem...

http://www.theeldergeek.com/forum/index.php?showtopic=25360

And here seems to be your answer..

http://msdn.microsoft.com/library/d...asics_extending/autoplay/autoplay2k_using.asp
 

https://forums.techguy.org/threads/no-vista-autoplay-with-usb-memory-card-reader.591298/
Relevancy 65.36%

Can anyone please help.

On my computer I have 2 memory card readers.
I tried using one of them but it wouldn't work. When I looking in My Computer it shows that Windows XP (Media Edition) isn't seeing them.

Windows used to see them but suddenly have vanished.

Does anyone know how to make Windows see them again without having to reinstall Windows.

They were originally lettered as Drives D & E which are now missing.

All help is much appreciated.

A:Windows XP vs Memory Card Reader problem

Microsoft Knowledge base has an article that will help you with your problem. It is article ID: 890546. This article discribes proper removal of hardware and a hotfix you can get from Microsoft.

http://www.techsupportforum.com/forums/f10/windows-xp-vs-memory-card-reader-problem-166351.html
Relevancy 65.36%

So shutdown problems We shutdown card reader Memory problem causes meet again I have an quot internal Memory card reader in my computer connected to the mainboard's USB slot The reader works correctly but every time I shut down Memory card reader causes shutdown problem my computer Windows realises to start complaining about Empty drives I press the shutdown button Message appears No disc in A Please insert disc Retry cancel continue A Floppy Drive I don't have one Message appears No disc in D Please insert disc Retry cancel continue D Sony memory Memory card reader causes shutdown problem stick quot magicgate quot Message appears No disc in E Please insert disc Retry cancel continue E SDHC card reader Message appears No disc in F Please insert disc Retry cancel continue F CF Card reader Message appears No disc in G Please insert disc Retry cancel continue G SM Card reader Message appears No disc in H Please insert disc Retry cancel continue Wait What's this Clicking continue will lead in to black screen These are my drives And my quot beautifully installed quot card reader

http://www.eightforums.com/drivers-hardware/7175-memory-card-reader-causes-shutdown-problem.html
Relevancy 65.36%

Hi:

I have been using a compact flash media reader device that plugs into a USB port on my fairly new Dell - (with XP). When I insert the flash memory card with my photos, I have always had a menu pop up with choices of what I'd like to do with the photos...until just recently. Now, nothing at all. I recently installed WinDVD6 and Roxio...but otherwise no changes to the machine. I've tried the usual re-boot...and also unplugged the device...but the new hardware wizard does not acknowledge it.

Thanks
 

Relevancy 65.36%

i am using windows photo gallery and i need to put the pictures from the photo gallery back on to my memory card i know how to do that but i need to upload like 500 pictures and i only know how to do one at a time?? any suggestions
 

A:uploading photos to a memory card reader

You multi-select as many images as you want, and copy them exactly like you "know how to do that."
 

https://forums.techguy.org/threads/uploading-photos-to-a-memory-card-reader.923054/
Relevancy 65.36%

My PC...Win XP...won't recognize my card reader. I've reinstalled it several times, but it keeps telling me that the USB isn't connected. It beeps and lights up when I plug it in, but the "Download Pictures" window doesn't appear. Any ideas?
 

A:PC won't recognize Fuji memory card reader

When you say re-installed do you mean the software that came with the reader? It's easier without. XP should just recognise the reader as an extra drive in my computer when you plug it in without any software.
Is it recognised in 'my computer' when plugged in. It should be a 'removable disc' in my computer, or words to that effect.
 

https://forums.techguy.org/threads/pc-wont-recognize-fuji-memory-card-reader.273409/
Relevancy 65.36%

http://www.jascoproducts.com/products/pc/viewPrd.asp?idcategory=6&idproduct=70
Hi, I bought this about a year ago and it worked at first but as time passed sometimes it would work and sometimes it wouldn't when I put in my memory stick to upload pictures, etc. Now I've been trying for a couple of days and whenever I insert it into the usb port the light flashes green (somestimes remains green) and the computer shows that that removable drive is there when I go to 'my computer'. But when I click on it it says "Please insert the removable drive E)" or it freezes my computer. I even tried it on a laptop and it doesn't want to open up.
 

A:GE Memory Stick Card Reader not working!

Hi and welcome. As with anything else, sometimes they go bad. Check to see if it's still under warranty.
 

https://forums.techguy.org/threads/ge-memory-stick-card-reader-not-working.740736/
Relevancy 65.36%

A friend of mine who is an dear older lady always comes to me for computer help but this one has me totally stumped She has an HP Pavilion Slimline with a built-in SD card reader She didn t issues card having SD Friend reader memory know Friend having SD memory card reader issues anything about the quot Safely Remove Hardware quot option and so has just been putting the card in and taking it out I believe what has happened to her is that she once pulled the card out when it was still working with a program Now when she sticks the SD card in the green light comes on but the computer does not recognize anything being in the device I went to the Safely Remove Hardware screen and the Friend having SD memory card reader issues device is showing up in there but if you click to quot Stop quot it an error message comes up advising that this device is already in use even though it is not So where could the hang up be How can we find it and release this device so Friend having SD memory card reader issues that she can use her card again We have tried reboots we have tried to just go to the device but it doesn t show up as quot in use quot anywhere but in that Safely Remove Hardware screen I also checked in the Device Manager and this device is shown as working fine no errors Help Thanks nbsp

A:Friend having SD memory card reader issues

If the card was accessed while removed, it's highly probable it got corrupted in the process. Safely Remove Hardware isn't really needed, unless you do just what happened or some malware accesses the card when you remove it... Like Vista.
Anyways. If you don't have a memory card reader, get one: http://www.newegg.com/Product/Produ...e=kingston_card_reader-_-20-134-753-_-Product and test if the card works in other systems. (Try finding a way to format it, if all else fails) If not, the card itself is now officially dead.
 

https://forums.techguy.org/threads/friend-having-sd-memory-card-reader-issues.870751/
Relevancy 65.36%

Good morning.

I am in the process of purchasing a digital camera, and I am trying to find a memory card reader for the following setup. I hope any one of you can help me.

I have a 4 pin firewire port on my 3 year old computer. Most, if not all, of the firewire card readers being sold have 6 pin connections. I can get a 6 to 4 adapter cable, but all of the card readers I have found get power from the bus on the computer through the 2 extra pins, and do not have a standalone power option.

So my question is this: Do any of you use a 6-pin firewire memory card reader with standalone power (AC adapter, batteries, the like)? FYI, I am using a Sandisk 1 GB CF II card.

This has been an incredibly hard piece of information to find out. Any help would be most appreciated.

Thank you.
 

Relevancy 65.36%

Please help! Just upgraded to Win 8.1 Pro from Win 8 on a Dell Latitude E6530. Everything was working fine; post upgrade, system does not recognize any of my SD cards upon insertion. [Don't even see a drive letter show up.] All other peripheral storage devices are fine. Has anyone run into this problem; if so, know a fix? Thanks.

A:Win 8.1 Pro Upgrade and Memory Card Reader Problem

Found the solution to this issue

To access the library of Windows 8 troubleshooting wizards, follow these steps:

Type "troubleshooting" while on the Start Screen and select Troubleshooting, OR follow these instructions:
Swipe in from the right side of the screen to open your Charms bar (if using a mouse, hover on the top right corner of the screen and move the pointer down to open the Charms bar) then select Settings. Alternately, press the Windows + I keys to go directly to the Settings Charm.Select Control Panel.In the location bar at the top of the window, select the arrow next to Control Panel and select All Control Panel items, then select Troubleshooting from the list of items.On the left side of the screen, select View all to get the full list of offline and online troubleshooting wizards.Run the Troubleshooter for Hardware and Devices - it finds you're missing a Chipset Driver. Install it.

This fixed my issue. Hope this helps.

http://www.eightforums.com/drivers-hardware/35282-win-8-1-pro-upgrade-memory-card-reader-problem.html
Relevancy 64.93%

Last week I Action missing "action" in Center found my way here from answers microsoft com cant-turn-on-action-center after unsatisfactory dealings with Dell and McAfee At least I didn t have to pay McAfee NOT to solve my problem Many hours and days later first a thank you to all on this site who posted on the topic in mid-December and whose counsel was invaluable to me watching from the sidelines That s now a closed forum and I need a little more help So Action Center missing in "action" far I ve followed all of the good advice ten steps worth and removed Win Sirefef cfg and Win Sirefef P along with a Rogue rootkit virus and minor mal adware My computer is running faster and better than it has in a long time The only lingering problem is that I cannot recover Action Center which has been replaced by an also inop WSCS neither of which can be turned back on again by any of many methods I ve tried including turning System Restore off then on again and other fixes none of which have solved this problem I have a line of code copied to my desktop to install in the Registry but I m uncomfortable doing it as it s well beyond my experience That code to be saved in Notepad and merged with the reg extension is HKEY LOCAL MACHINE SOFTWARE Microsoft Windows CurrentVersion Explorer ShellServiceObjects F F FDD-AA D- -A -C B AF B A quot AutoStart quot quot quot The explanation is that doing this will restore Action Center and all will be well I ve also read that a repair reinstall might be warranted At this point five long days into the problem I m brain dead and need sound advice I know from searching that this is not a new problem nor a rare one Rather than trial and error on my part that might make things worse what can you recommend that actually works to get Action Center back and running normally again

A:Action Center missing in "action"

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===If your .reg file is the same as the text in bold AND that your Operaring system is Window 7 the you can execute it.For windows 7 ONLY.Windows Registry Editor Version 5.00[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ShellServiceObjects\{F56F6FDD-AA9D-4618-A949-C1B91AF43B1A}]"AutoStart"=""And reboot normally. The Action Center icon can reappear with a delay. One user reported that after first reboot it took around 4 minutes to show the icon and unblock the options. We can confirm this behaviour.===Take this opportunity to run these two tools.Please run this security check for my review.Download Security Check by screen317 from here.Save it to your Desktop.Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.A Notepad document should open automatically called checkup.txt; please post the contents of that document.===Search for AdWare, PUP (Potentially Unwanted Program) installed on your computer.Please download AdwCleaner by Xplode onto your Desktop.Double click on AdwCleaner.exe to run the tool.Click on Search.A log file will automatically open after the scan has finished.Please post the content of that log file with your next answer.You can find the log file at C:\AdwCleaner[Rn].txt (n is a number).Post the logs for my review.

http://www.bleepingcomputer.com/forums/t/481646/action-center-missing-in-action/
Relevancy 64.93%

My wife has a Gateway MT3705 laptop that is 3 years old. It reads normal SD cards, but not SD-HC cards. I have been looking on the Gateway website for an up-to-date driver (because I think in 2007 HC cards were not yet around), but I could not see any driver that looked promising.
Does anybody have a suggestion on how to make this laptop read SD-HC cards.

A:Driver for SD card reader

You need an outboard card reader that's HDSC compatible. Luckily, a lot of manufacturers make USB-plug ones that are speedy and pretty cheap.
I'm looking at the drivers available for your model: yeah, sketchy! There's nothing in the page or the download itself that explains what the upgrades are fixing or upgrading. That's sketchy.

If you could find who makes the actual motherboard you could see if the manufacturer has a firmware update. For instance, Quanta Computer, Inc. in Taiwan makes mine. They don't offer firmware upgrades, but some manufacturers do.

http://www.vistax64.com/drivers/271345-driver-sd-card-reader.html
Relevancy 64.93%

Hello,

After I've installed windows 7 on my notebook my cardreader doesn't work anymore. I know that I have to do a driver update, but I can't find the right drivers. I have a Sony Vaio VGN-N31M. Anybody knows which drivers I need?

tnx in advanve!

Joel

A:Card reader driver

Hi.

Try this one - http://www.sevenforums.com/attachmen...21_xx12_03.zip

http://www.sevenforums.com/drivers/77582-card-reader-driver.html